help-and-support-forums
tx12 and ep1 3.2.0
Failed upgrade on TX16s
.luac files -- necessary, or junk?
hi i have tx12 and has faile erore
Documentation for developer
Software
My ELRS signal is not that good.
elrs Update TX to 3.0.0 or higher results in Targets Mismatch
Software
R9 receiver has to power on twice to connect to the transmitter. ExpreeLRS 3.2
[SOLVED] Dead TX?
Hardware
binding failure tango2pro, es24tx slimpro and betafpv meteor 65pro 2022
Happymodel EP2
Flashed wrong target on ELRS Rx and now nothing works.
tbs tango2 pro anf happymodel es24tx slim pro cannot bring module to flash
elrs receiver won't work on mamba mk4 f722
Happymodel ES24TX Pro
Radio master Boxer, does anyone have this working with internal ExpressLRS?
[SOLVED] Lua script doesn't load up with T-Pro and Happymodel slim pro
Unable to bind my new BETAFPV RX 868 MHZ - ELRS 3.2.0
Unable to connect to the MCU device
Cant get happymodel slim pro to flash
rx and tx connect then disconnects
Binding issue with no error message
General
ELRS Fail Safe issues on HM X12 AIO Flight Controller
ELRS RX won´t get in wifi mode
Jumper Tpro Internal ELRS 3.2.0 and HappyModel Crux35 ELRS 3.0.1 ( or 3.2.0) not talking
Having issues with elrs configurator and binding
goku f411
no inputs spi // (used the search and the old problem)
Skyzone ELRS backpack not changing band and/or channel on goggles
Baby Ape Pro is Bound with Radio Master Zorro except Beta flight doesn't recognize any connectivity
jumper t-pro failed
Failed to flash 3.2.0
Meteor 65 pro 2022 ELRS issues (help!)
Bad RSSI dBm value & connection losses
Meteor75 won't go into wifi mode
New to Hobby Need Help Binding Darwin Baby Ape V2-ELRS
HGLRC Hermes 2.4 can not flash through betaflight. It doesn't go into wifi mode either, just flashes
Radiomaster TX12mk2 doesn't connect to Radiomaster RP1
I have a problem to update frimeware on betaflight micro tx 1000mw module.
binding elrs to controller
RX GEPRC Update Cinebot30?
pancake v1 vtx problem
stable f4111 flash to elrs3.0
Pb RX Axisflying no wifi
Radiomaster zorro
Connecting RX
Happymodel EP2 boot loop after flashing 2.5.2 first and after 3.2.0
Build Failure on versions 3.0.0 and newer
any ideas why?
Hardware
Is there a unique sensor order?
General