Was flying my whoop around the house and it will fail safe on random occasions, especially if I fly to the upstairs rooms which are the furthest away from my own room, my VTX signal is perfectly fine. I thought my nano module was defective so I got a new one and I’m still having the same issues. I'm not sure if my AIO is faulty or if there is an issue with my settings
#ELRS Fail Safe issues on HM X12 AIO Flight Controller
verbal badger
heres a video demonstrating the random LQ drops that occur, if im far away the drone will failsafe
lusty dove
Was flying my whoop around the house and it will fail safe on random occasions, ...
What betaflight version is on the whoop?
What version of ExpressLRS are you using on the module?
verbal badger
What betaflight version is on the whoop?
What version of ExpressLRS are you usin...
2.5.1 on the module
4.3.1 on my whoop
lusty dove
2.5.1 on the module
4.3.1 on my whoop
is VTX admin active/enabled or set to a Band/Channel?
(vtx admin in the ExpressLRS lua Script)
lusty dove
have you tried this on a faster packet rate?
verbal badger
yeah and the issues are the same at 250
lusty dove
what's the power level on the vtx?
verbal badger
i locked it at 500mw to try and compensate
lusty dove
i locked it at 500mw to try and compensate
No.. the vtx..
verbal badger
my b, its at 400mw
lusty dove
my b, its at 400mw
have you tried this on a lower vtx power?
lusty dove
LQ dropping is a sign of interference usually
could you post a diff all dump of the whoop here please
lusty dove
feature -SOFTSERIAL
feature -LED_STRIP
save
these commands disable SoftSerial and Led Strip
try if things will improve
verbal badger
ill try them, thanks!