Just got the Happymodel ES24TX Slim pro external module and the lua script doesn't load up on Jumperrc tpro controller. Any tips?
#[SOLVED] Lua script doesn't load up with T-Pro and Happymodel slim pro
runic relic
sharp quarry
Just got the Happymodel ES24TX Slim pro external module and the lua script doesn...
Go back to this and make sure the current model is set up for ExpressLRS use
https://www.expresslrs.org/quick-start/transmitters/tx-prep/
runic relic
Everything looks fine
sharp quarry
Everything looks fine
can you post screenshots please
model menu -> internal/external rf settings
runic relic
runic relic
sharp quarry
it is in wifi mode.. reboot it..
did you flash it with the option UART_INVERTED enabled?
don't reboot it..
load the webui then
post screenshot of the webUI options tab..
runic relic
runic relic
did you flash it with the option UART_INVERTED enabled?
havent done anything with flashing
sharp quarry
ah.. no options tab.. still in 2.x
runic relic
took it out of the box and tried to load lua to check if it connects
sharp quarry
havent done anything with flashing
reboot it and set baud rate on the model settings to 3.75M or 400K
runic relic
Doesn't work with either 400k or 3.75m
sharp quarry
Doesn't work with either 400k or 3.75m
can you check if none of the pins on your external bay is bent or missing?
runic relic
sharp quarry
well, that's not the important pin.. so that's fine..
runic relic
Last time you said that broken pin has no substance
I am here from that Aion nano module problem 😄
sharp quarry
Last time you said that broken pin has no substance
do you want me to cut that pin off from mine and load the lua script with one of my nano modules?
runic relic
I made a controller update from opentx to edgetx i was wondering can that make any problems
runic relic
do you want me to cut that pin off from mine and load the lua script with one of...
No
sharp quarry
I made a controller update from opentx to edgetx i was wondering can that make a...
it shouldn't really.. as long as the model is set up for use with an external module, and the physical connection's there.. then it'll work
runic relic
well looking to settings and physical connections it looks fine module starts up and led light lights up
sharp quarry
well looking to settings and physical connections it looks fine module starts up...
it blinks orange, yes?
then goes into green breathing pattern after 60s
runic relic
runic relic
it blinks orange, yes?
Yes
sharp quarry
Yes
can you connect a usb power bank or usb charger into the module WHILE it is on the radio and see whether that will enable you to load the lua script
runic relic
Still loading…
sharp quarry
Still loading…
you've not reflashed this module?
runic relic
no havent done anything just took it out of the box and put it on the controller. Downloaded lua script from ExpressLRS configurator and put it in sd card in scripts --> tools folder. And wanted to check if the lue loads up
sharp quarry
no havent done anything just took it out of the box and put it on the controller...
try reflashing the module.. keep baud rate to 400k for now..
sharp quarry
what ExpressLRS Configurator version are you using?
runic relic
sharp quarry
you're flashing via UART
sharp quarry
yeah, "via uart"
per the advisory you posted: you can update straight to 3.2.0 without repartitioner or going to 2.5.2 first if flashing via uart
sharp quarry
where do i find that?
here's the flashing guide
https://www.expresslrs.org/quick-start/transmitters/es24tx/#flashing-via-usbuart
runic relic
So i need to disassemble the module and find those dipswitches?
sharp quarry
So i need to disassemble the module and find those dipswitches?
yeah.. four screws is all it takes to get to those dipswitches
runic relic
Set it like this
Returned dipswitch positions back to normal operation
and assembled everything back
but the lua doesn't load up
sharp quarry
but the lua doesn't load up
could you try increasing baud rate to 3.75M please
runic relic
sharp quarry
it's detected to be on 500Hz
sharp quarry
do you have any other lua script running as a widget?
sharp quarry
You mean trying to load other?
I mean do you have like yaapu or inav telemetry widget..
runic relic
No havent tried anything with telemetry
sharp quarry
No havent tried anything with telemetry
you've never tried this on a mate's radio?
sharp quarry
I dont exacly know what that means
have you tried on a friend's radio?
runic relic
Got it working
Problem was with the adapter
Somehow it got the power, but couldn’t transfer data
Took everything apart, checked if there isn’t any broken cables. Found nothing. The put everything back and it worked.
[SOLVED] Lua script doesn't load up with T-Pro and Happymodel slim pro
lofty anvil
