#unofficial-setup-help
1 messages · Page 145 of 1
Depends on your hardware & bandwidth. On modern hardware with good connection around a minute per server.
It’s been doing it for like 30 mins plus
The connection to steam can sometimes be really slow. Means you're waiting for connection to get the udpate.
Thats not normal 🙂 Restart?
Its says I can force start or force stop the server, should do I do either??
i dont your setup 🙂 If you just using the steamcmd (native) stop the server, do the update, start the server.
If its Nitrado, Id let it run. They eventually complete.
Yeah it’s nitrado
If you are an ASA Server Owner and your server is stuck in a stalled restart after the update, here's how to get your server started:
Stop your server.
Scroll down to Backup in General settings.
Set the start with backup to your most recent save. The one with the latest date and time, not "start with current savegame".
Save changes and then wait 10 minutes for it to go through.
Then restart server.
(for Nitrado servers)
Still can't find my server 😒
Does anyone know how to fix this issue?
I can't start my server anymore. When I start it, it gets stuck at this point:
[2025.03.27-23.42.01:902][ 14]Full Startup: 17.40 seconds
[2025.03.27-23.42.01:903][100]Number of cores 16
No matter what I try, it won’t go any further. I have already completely deleted and reinstalled the server, but the problem persists. There are no mods or custom configurations installed.
Is the update good to use? Says about revert in #status-updates
i cant seem to update the server any ideas
check your GUS for ActiveMapMod=0 and if in there remove it
Thanks that was it, whatever the reason was that it was suddenly back in the gus on my old servers
Im stuck on it updating and that didnt seem to work
two of my servers updated fine but my extinction one isnt
Same we just tried it for ours also and still at the same screen as before
Everyone else serv down too?
i had to restore 25hrs the new update f my server
Yes
All our servers are working except for Astra. ;_;
All ours are still down
What did you do
Servers I play on are still down sadly
there a new setting to disable wind turbine decay? don't wnna deal with it when im just playing on a dedicated server
Anyone host dedicated servers on Linux?
does anyone know if there's a list of engram names for the skins in the animation pack by any chance?
i'd like to hide the Animated Series Cosmetic Pack engrams from the crafting tab as wildcard borked up the promotional preview location for them.
now they're messing up the crafting tab area of my players when they search for engrams or hide folders
Good morning everyone, sorry I have a question. I have an Ark Evolved server that I set up myself on a Linux server, but the chat doesn't work—neither the global and tribe chat box nor the voice chat. I've tried everything, but I don't know what I'm doing wrong. The server is for both Steam and Epic, and from what I read, I was supposed to enable Vivox, but I’ve done everything and nothing works. Could anyone help me?
I'm desperate.

is the newest major patch not ready for unofficials?
My Servers wont load the update. Based on Nitrado
can somebody help me with the structure decay settings? what do i need to add to which file to enable official 1x decay timer?
Yeah it was ready yesterday
but why my servers still boot up in 63.3 ? instead of 63.7
63.3 is the latest
yeah, it's a bit confusing patchnote clientside vs serverside, but 63.3 is latest indeed
(i went flying to see if i could spot the new dino to make sure as i had the same doubt you had ^^)
Yeah they either messed up the version number in the patch notes or on the deployment lol
Or 63.6 isn't ready yet so they deployed 63.3 instead, who knows honestly
Client and server can have different versions. As long as the first number matches, you’re good.
.6 was one with critical issue they said in #status-updates so they had to go with an older version
They rolled back the server release to an earlier one. It’s in status updates.
Yup
The dedicated storage is bugging on the unofficial server and it couldn't be created in the replicator because it doesn't recognize it. Can someone fix it? Please.
Is there a configuration tool / GUI like I used on windows?
Or am I just stuck with SteamCMD and a text editor?
I see arch server manager for linux on GitHub .. but it looks CLI.
There's just so many settings a GUI would really be handy
Don’t know never looked for one, I been doing manual sets since ase lol. And using a custom discord bot I made and ansible to control them, 😂
Okieeee
If you'd like, I can give you a tool. It's paid, but it costs only $10 as a one-time payment, and you can install 5 servers... it's really good. The only problem I have right now is with the chat, which is what I'm currently checking. I paid for it, and honestly, I really like it! It's the same tool that Hostinger uses for their game panel.
I'm not getting paid or anything, but I came across it, and it's really good.
Ty, if I need to I'll run wine and just use the Windows version anyway
Then I can run all 13 maps with wonderful config, for free.
$10 one time payment isn't too bad tho
Okay, anyway, I'll leave you the name of the administrator. It doesn't just let you run ARK servers, but also other games like Minecraft and such. I’ll tell you, the only problem right now is that the voice chat doesn’t work properly.
->> cubecoders AMP
AMP I use for Minecraft. I don’t like it for Ark. it doesn’t give enough access to logs.
I use ASAM for Ark.
When I tested it, it wasn’t showing the console logs. From memory the devs said they couldn’t read them.
I like AMP. I run about 15 Minecraft servers from AMP. I just don’t use it for Ark.
Can you send me a page for ASAM
Yes, you can see the logs.
Now the only problem I have is that my voice chat does not work, I activate Vivox but it seems not to work and I already try many things.

If anyone knows how to set it up, I would be very grateful.
Sent you a discord invite for ASAM
ASAM is free, BTW
Try it, it won’t cost to give it a go. You can always try AMP too.
But ASAM its for Windows?
The problem is that the server I have is Linux...
Give AMP a try then
Yes, I am using AMP... the problem is that neither the chat box nor the voice chat works forme


Problem is Ark doesn’t have a proper Linux version. So life will be a bit harder
Shame they’ve not done that for ASA
Are you doing this for ASE?
Yep
Forget ASAM then, it’s for ASA
Does your extinction map work. Even with cs mods ? Because i have to take down my whole cluster Because extinction doesnt woren for me after the patch yesterday
You from Glasgow? Putting but on the end of a sentence is a very Glasgow thing to do 🙂 I should know, I live there 😂
So am I ruined with that chat?
Help pls ?
What did ya all do after the patch. I saw something with roleback but how do i do this
Well, not even text chat works... well... at least it is not left on my server ...
Extinction works fine for me after patch, no rollback
Hmm ok thx for the feedback
We had to restore the world save, I think. 🤔
Does anyone know the code used for daynight cycle, astreaos is weird when it comes to day n night
What’s the max to a single stat a tamed 150 can get? I’ve seen a 50 once or twice but I don’t know what the max is
anyone has the right config typo to add a spawn of a creature ?
So what i have found using Start Params and/or Ini for Server port Port=12345 Does not set the port
I watch my firewall and players are joining in using from first map starting 7777 and increasing automatically depending on the order the maps start
@low haven sir i can now join servar unofficial xbox im player pc
i have not tried that one..
I did try ?Port= and ini.. will try - now
?port was ASE and only works for a few with ASA, -port works for most people with ASA
Worked on my asa till this update lol
But @polar echo Thank you so much
Yeah, some people it worked for most people it never did though, but it's WC so nothing's consistent 🤣
I know right..
Now to update my files lol
Hello people, I don't know if I'm in the right channel or not, I'm having issues when doing hosting a single player game. I keep trying to remove mods from my list, but they keep adding themselves back onto the list. Anyone have a solution to this problem other than resubscribing from all of the mods?
Thanks for the reply, but the mods are adding themselves back on without exiting the setup menu, also I can stream if anyone is willing to take a look. I may not be explaining it correctly.
I clicked Host\local go to the right side of the screen and start removing mods, and they just keep reappearing
No I don't start the game, I was working on making a new game with new mods
yea
Oh is this discord for the other game XD
Oh I see
All good friend, thanks for trying!
IIRC, mod loading should be the same for ASE as it is in ASA. Stuff isn't saved unless you launch a SP world with the changes.
....
any1 can help me ? on my server all the dinos cant breed if there is no one in render ... is there any mod or set up on nitrado that i can disable this shit ? i mean i need that the dinos breed still if no one in the render ...
has anyone found a way to disable wind turbines decay by chance?
Normal for ASA, i use the hitching post in the cs mod to keep breeders put of stasis
So if we gonna use the hitching post they can breed if no one is in render?
mégma válaszol valaki ?
hi guys! im tryna play a non dedicate server with my friend, but he keeps getting connection timeout when joining. my other friend can join.
he already
- reset his game and pc
- launched as admin
- made sure he has no mods
- disabled firewall
anything else to try?
If it's non-dedicated, it could potentially be that their connection to you is the issue/problem due to internet strength/speed and/or distance from you.
Is there a specific setting that enables/disables XP from killing your own (baby) dinos? I know it doesn't give XP on official, but it does on unofficial
Yes, it's disabled by default on pve, even unofficials. I had to manually re-add it to mine.
UnclaimedKillXPMultiplier=1
Are you sure? I don't have that line in any of my config files, just killed a 225 baby carch (using friendly fire, not tribe war) and got around 160k xp (general xp x3) (server is pve)
It might have been fixed in the past few months, but I definitely had to add it to mine.
Has anyone migrated their astreos mod map to the official map? If so did you keep your save or did you have to start fresh
I believe ppl had to start fresh.
Anyone else getting really high ping on servers since update?
Yep i have this issue with my cluster, i suspect with somes others servers owners a bug with CS.
I currently doing a test with two identical servers except that one has CS and the other without.
Has anyone found a spawn code for the Deinotherium?
can anyone help my server keeps saying this and not starting:
steam user is not set.
Using anonymous user.
Not updating game server as auto update was set to 0. Starting Server
:/home/container$ rmv() { echo -e "stoppping server"; rcon -a 127.0.0.1:${RCON_PORT} -p ${ARK_ADMIN_PASSWORD} -c saveworld && rcon -a 127.0.0.1:${RCON_PORT} -p ${ARK_ADMIN_PASSWORD} -c DoExit; }; trap rmv 15; cd ShooterGame/Binaries/Linux && ./ShooterGameServer ${SERVER_MAP}?listen?SessionName="${SESSION_NAME}"?ServerPassword=${ARK_PASSWORD}?ServerAdminPassword=${ARK_ADMIN_PASSWORD}?Port=${SERVER_PORT}?RCONPort=${RCON_PORT}?QueryPort=${QUERY_PORT}?RCONEnabled=${ENABLE_RCON}$( [ "$BATTLE_EYE" == "0" ] || printf %s '?-NoBattlEye' ) -server -log & until echo "waiting for rcon connection..."; rcon -a 127.0.0.1:${RCON_PORT} -p ${ARK_ADMIN_PASSWORD}; do sleep 5; done
waiting for rcon connection...
Enter protocol type (empty for rcon): Shutdown handler: initalize.
Using binned.
4.5.1-0+UE4 7038 3077 404 10
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Setting breakpad minidump AppID = 346110
I need help
I host a pvp server on the center and for some reason any structures build in caves take 10x more explosives etc to damage
There no damage increase to cave structures, more like damage reduction
(Example: I used 150 c4 and 50 rockets just to do 10k damage on a vault, and the vault still stood with 40k health in said cave)
This creates an extremely unfair advantage to anyone not built in caves or trying to raid others that are in caves.
I’ve researched and there’s nothing that pertains to this issue and nothing in server setting specifies an adjustment for it.
Any tips? Could really use it.
is anyone else having issues with version mismatches between steam, xbox, and nitrado?
I just rented and configured a server about an hour ago to play with my son. I play on PC (Steam) and my son plays on Xbox. My steam ASA version is v63.12, his Xbox version is v63.7, and the nitrado server is v63.11
None of our devices have updates for ARK so I'm not sure how to fix this is or what to do. Just seeing if anyone else has experienced this or can offer any guidance. Thanks!
According to the #patch-notes this is intended.
Hi How can I download and install mods on epic games?
I just wiped my server, how do people still have access to uploaded items? I thought I deleted all tribute data.
Is this save data saved somewhere else?
Epic Games doesnt support mods.
Sorry what?
Not sure if anyone has any advice but;
I've been running a unofficial server from a PC for the last couple weeks with no problems. I opened all ports, added everything through the firewalls and whitelisted for my antivirus program.
Yesterday night I updated the Ark Server Version to 63.11.
When I open Ark ASA on Xbox, I can see the server in the list, it will let me login to it with the password, but only access via local.
When I have a friend connect from a different IP, the connection just times out after he enters the password to connect.
It leads me to believe something is blocking connections from beyond my firewall/router/modem, but everything is set the same as it's been and hasn't been an issue until the updates last night.
Any ideas? Thanks in advance.
No, it is against ToS and no one will help you with cracked versions.
ok thx
Can anyone help me. Looking to increase specific spawns on our server, specifically procoptodons and horses
Is there any way to use the creative mod in ark mobile 1.0 for private world
I just wiped my server, how do people still have access to uploaded items? I thought I deleted all tribute data.
Is this save data saved somewhere else?
We don’t have CS
ark mobile has their own discord -> #general message
Does anyone know if there is a different map id for the dlc version of astraeos for steamcmd? Because I have Astraeos_WP but if I remove mod from my active mods it gets stuck in the ticking loop.
does anyone have an Idea when starting 10 servers from ase in cluster the last one starting is always giving connection timeout?
Hello, is the ini settings configurable like S+ was? Im trying to increase the slot count and crafting speed for crafting stations. This was possible in S+ but it doesnt seem to work here.
No, you still have to use mods for that stuff. Cybers Structures is basically S+ for ASA
You have to wipe your cluster ID to wipe the obelisk.
Get a new cluster ID.
Hey i am trying to Install a Survival Evolved Server for my friends but steam cmd is stuck on
Update state (0x3) reconfiguring, progress: 0.00 (0 / 0)
I am trying to install app id 376030 and it doesnt work on 2 diff linux servers
Can someone help us. We are playing weeks with 13 mods in our server. Now since yesterday we cannot place the mod items anymore. When trying the picture fades away. Stuff already placed is still there. When we pick up existing mod items and want to replace them it wont work either. What is causing this and how can we fix this?
What mods are you using? What mod is having issues with placement? What's your load order?
We use 13 mods since the start and only after the last ark update this is occuring. load order is the same since the start of the server
I’m adding a scorched server to have a cluster. However I want to have some mods exclusive to that server and not my island server. Is this possible and how does it work? Like I wouldn’t want all of the same mods. If that makes sense?
So my question is how does that work?
Über welchen anbieter bekommt man (preis - leistungstechnisch) nen günstigen cluster ? (Für Ase)
Reinstall the mods on your client.
You can do it, but learnt engrams and items those engrams made will break moving between them.
like if you didn't have CS on each server, then the tribute packs you can make will dissapear when going to a server without CS.. but if you want to have RR on a server so people can gamble, then you will be fine. If you have a stacking mod, that will be a problem.. so it depends which mods you thinking about.
Anyone have a problem with not being able to place structures? I'm only having the issue on the Island. All of the other maps in my cluster with the same mods don't have this issue.
hey so I have mods and suddenly none of the mods are allowing items to be placed how can I go about fixing that?
So I have upped the spawn count of Roos on my server but still no increase. Wonder why. The equiss spawn went up nicely. Roos still sitting at almost nothing
Hello, I'm having a really annoying problem. If I disconnect from my server or am too far from my base, the maturing dinos die of starvation.
is there a command for this
Hiii,
Is it possible to use survive of the fittest on a dedicated Server?
7700 is just simply better for everything.
which ever has better single core performance
Equal
Only difference is core count and L2 cache
Then either! lol
I'm having an issue where AG reborn dinos cant do damage to Prometheus dinos is there any way i can override this?
Is anyone having problems with loading into their astraeos maps mine crashes everytime i try to load in and on the menue the oing is varying between 0 and 700
im trying to build in a cave, i have cave building turned on. it says cant place structures here .. any ideas?
Hi doesnt work. Tried even to reinstall the server. Added all mods 1 by one and with every mod single in it still nothing placeable
We have this issue also
It's mod issues. The mod makers haven't updated on some of the mods to the new patch or update that was rolled out
okay hope they will fix this soon
I have been reaching out to mod makers to get them to fix it
ah thats great 🙂
Are there even mods already updated? Because i have the building problem with all of them
Dag is getting theirs fixed Thursday I got a message back from them . They didn't even know it was broke.
Depending on what was changed they won't be able to either, dev kit hasn't been updated in over a month
Oof
Mods are still loading and what we have placed is working, except we cant place new stuff
okay please i need help
i have probleme with the game when i start the game the hosted crash
youre hosting your own server
ark survival evolved
i
gonna need more context on whats crashing, what you are doing, and are you hosting the server on the same device? etc
can you come in my dm
pictures can be in DMs but you should do the messages here so more can help.
so when i want launch my own server a message come sry im fr
a window spawn but not the game
if you want to play and host at the same time through the client you need to host a non-dedicated.
dedicated on steam will open the server GUI and close the client
you can host a dedicated server by downloading the server files separately tho.
okay but i cant invite my frends
a dedicated server would need to be port-forwarded for people outside your network to join.
non-dedi they can just join through steam (given enough tries, it can be buggy)
okay i gonna try but i dont have the button in game to invite
are you on epic?
on steam you just use steam's invite system. ark doesn't have its own.
Are all servers down?
no
It's possible to save a Server Backup on nitrado to play your World a half year later cos it ll be deleted after 1 month not playing. And the other question is : if you Played on a Cluster and the server with your character is deleted can you get your character back somehow on other Server on the same Cluster which is still online ?
No and no.
pretty sure you can download the save if you own the server. but otherwise you'd need to ask the owner.
if the server is open to singleplayer you could transfer to singleplayer. would also need to ask the owner to open it tho. just have them disable downloads and only allow uploads 
going from automated ark to VWS. AA is just too strong with all of the people we have now
Hey guys anyone know how to add a PvP ini file to asa
Hello Guys While playing Ark Survival Ascended, the Extinction map and no other maps open. The world appears on the screen and when I press play, it gets stuck in a bug. I can't even enter The Island. I installed the DLCs but I still can't play. Please help.
Is anyone else having issues with extinction and crashing in the green obi area/sunken forest area?
hey,guys
i used this ini for wyvern milk stacks in my server but it works in certain maps but don't work in the others
ConfigOverrideItemMaxQuantity=(ItemClassString="PrimalItemConsumable_WyvernMilk_C",Quantity=(MaxItemQuantity=5,bIgnoreMultiplier=True))
doea angone know what cause this?😭
Hey team! I just upgraded to Windows 11 and now my ASE game is much more laggy, especially when opening the inventory. Notably, the lag only happens when I am streaming on discord, and it resolves when I stop streaming. This was not an issue prior to upgrading the Windows 11.
Coincidence or noted issue?
someone here that can help me with some informations for setting up a server for my friendgroup would pref voice and language german
a very stupid question but would changing the map on g portal delete the old map tamed dinos ?
yes
unless you upload them via the obelisk beforehand, it will create a whole new environment and wipe structures and dinos
Hi, I need some help please
i was playing ark Ascended with a mod -Ark Descended-
And right after tue update of the mod, my world was bugged
I mean, I didn't lose my character, but I lose everything about the mod, every dinos, every structures, weapons, ressources etc etc
Is there a way to do a backup ? So I can have everything back ?
Servers Down ?
Yup I killed them all
#patch-notes major patch is there
1 out off 3 can join our server ?...
ok so i guess that answered part of my question.
Its always the same: Major patch needs server and client update
There is no update on server ...
Yes there, or unless your on Nitardo then you need to wait for them to offer it 😂
Because of how updates work
anyone else not seeing their servers after recent patch
Yes
yeah i should have read up before typing lol
My servers wont show up
I couldn't get the cat to spawn unless I did the trick that we had to use back when Astraeos came out, removing the content folders and re-downloading the server. I hate that they broke updates like this...
Probably because Nitrado hasn't gotten the update yet.
my unofficial is doing an update now
Some updated, and some didn't.
Must be nice. Nitrado is lagging horribly on the web UI. Like 5 seconds after a click.
Ours is currently updating, now. Just started.
uh oh my hole clusters stuck on updating
So is my server, i dont want to force stop it, but it has been updating for like 15 minutes
Some can take a very long time.
My server doesnt want to update and its stuck in a loop. All i can do its stop it and wait, isnt it?
Just had to force stop mine as it was looping
Stopping for 15 mins usually helps
Noted! Thank you 🤝
still stuck in a loop ffs
Me too...
just going to give up for the night
Same cant even force stop
Okay it let me now its taking forever to force stop lmao. Damn you Nitrado and your monopoly on ark servers
damn nitrado i now have to go talk to these strangers in my house who claim we are related
Anyone here
I guess
I assume no one has figured out how to update the servers? I’ve been on loop for almost 2 hours now
I want experience guy who help me to set-up my server for 1000x primal
If anyone want to help we will make him admin forever
Actually I bought a server
And I didn't setup properly
So I need expert guy
Try to update. Stop for 20 minutes. Try again. Stop for 20 minutes. And so on
Im updating my servers now, so that worked thanks to @wise kindle
np
Mine has been stuck "updating for 45 mins"
Dont wait more than 5-10 minutes...
Just stop it for 20 minutes and try again
Ok I’m going to attempt doing that now
You might need to stop and select the latest save and start with that save. You will rollback a few hours maybe 5 hours max but will most likley fix it
The stopping for 20 minutes and restarting over and over again till it works still isnt working for me so might as well just do a rollback cause that worked last time for me
Well.. with a server full of people doing things... A rollback its a bad decision. Im gonna stick to the wait strategy lol.
Yeah but sometimes rolling back an hour or so is better than making people wait. Can also be the only fix sometimes lol
I have servers that have been running the update for over 2 hours that are still completing. Its best to just let the update finish.
My server took pretty long to update, but it finished finally.
Nah. Not in my opinion. People can wait patiently. Its a game after all
How long is pretty long?
he's ingame now @lilac osprey aint getting back to you xD
Prolly over an hour for better or worse, i force stopped it, but retried it.
retracts previous statement about not replying
Anyone else had their severs corrupted after the update?
Mercifully no, id full send lose it if it broke completely.
So my buddy has a server that a few of us all play. Does anyone know why it is grayed out for me and says unknown as the map and 0/0 players then blank for the rest of the info. I’ve hit refresh many times and still nothing. But we have a person in our DC that says there able to log in
Didn't bother to read any of this chat then?
the newest patch broke nitrado servers for some people. nitrado servers are stuck in an infinite update loop and the person in the DC probably maybe on a previous patch. the same thing happend to me until i updated my game
It's not infinite it just takes a while (for me). My cluster has 11 servers. A few took the update and advertised right away. A few started to advertise and looped 5 or 6 times but eventually sorted themselves out. Two of them sat on updating for almost an hour then started up and advertised without issue.
Ultimately all 11 resolved themselves and advertised persistently without any intervention at all. Just had to be patient and let them sit for about an hour altogether
I have 2 out of my 22 servers still updating. I'm just letting them go and they are slowly completing and coming online.
What is your current server verison? My are down and just updated but i dont see a patch note from WC
i see that but my servers are at 64.2 the patch notes say i should be at 64.1- this has happened in the past and I have to reinstall to fix just makeing sure that not the case
great day for the dyslexia to be working over time! Thanks!!
Heya I'm wondering what is the correct spawn command for the modded Desolatitan, I am using the one he gives in the files (Sdf Desolatitan 1 150 1) but it is not working on my unofficial Island map
This its weird. I click on start, server tries to restart, but goes to offline again. I dont get why this is happening...
Anyone's unofficial server crash with the kitty? Idk. Just the kitty maps?
I guess I could look at the crash log.... gross
Nope. All good
mine's stable, I've not gone into the game yet /knock on wood, and this is with the update
Ok thanks. I'll read logs later
I was client crashing yesterday but I think that was bc of EOS
also anyone wanting to not be deluged by kitties or want them to be admin spawn: NPCReplacements=(FromClassName="Cat_Character_BP_C", ToClassName="") will stop them from spawning.
So is it just me or is everybody getting huge lag spikes and rubber banding?
Is there a way (INI) to use the wind turbine in the water again and activate the damage?
I am trying to build a ocean base with the alfa oceanic platform mod and when i start building up I get an error the the building is to high. I'm over the deep part of the center ocean. Can I change ini files to fix this?
wwwaaaaaa... but there is only like.... 1 meow-mix ...like a unicorn rarity
Huh! I haven't been in game yet to see but someone commented in general about having a lot of them around their base
Is there a way to wipe wild dinos from server side without making it part of a server restart?
Similar to in game admin commands
Cheat destroywilddinos
I'm having an issue where AG reborn dinos cant do damage to Prometheus dinos is there any way i can override this?
why wont my server launch....
Apr 02 03:23:12 quackserver steamcmd.sh[127905]: Connecting anonymously to Steam Public...OK
Apr 02 03:23:12 quackserver steamcmd.sh[127905]: Waiting for client config...OK
Apr 02 03:23:12 quackserver steamcmd.sh[127905]: Waiting for user info...OK
Apr 02 03:23:12 quackserver steamcmd.sh[127905]: Please use force_install_dir before logon!
Apr 02 03:23:13 quackserver steamcmd.sh[127905]: Success! App '376030' already up to date.
Apr 02 03:23:13 quackserver steamcmd.sh[127905]:
Apr 02 03:23:13 quackserver systemd[1]: Started ARK: Survival Evolved dedicated server.
Apr 02 03:23:14 quackserver ShooterGameServer[127924]: [S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Apr 02 03:23:14 quackserver ShooterGameServer[127924]: Setting breakpad minidump AppID = 346110
after that it just hangs and never starts
guys 😦
hello guys, maybe it's not specially channel for questions, but i will do anyway so my question is anyone knows how to make a servers cluster in Ark Server Manager if anyone knows u can send me a personal message i will appreciate u so much
on windows?
yes
ark server manager is a great tool
I suggest using that to manage your server.
There are cluster settings in the administration tab
if you don't want to use that tool you can make a cluster by adding the following to your commandlines: -clusterid=mycluster123
name your cluster as you wish
hopefully this helps
i did it already, but it still not work
maybe try using the directory override
-ClusterDirOverride=C:/TestStorage/
sure
figure my problem... ufw allow 7777 && ufw allow 27015 🤦♂️
I forwarded the port... but never opened it on my pc.... kill me that took 2 hours
it's on linux
Does anyone know of any console commands that gets details about a player using their EOS ID?
anyone know of any mod for ASE that changes the ants and meganuera in a way that causes them to not get past level 1? I forgot how incredibly strong those fuckers are
You can try using beacon...it's not a mod but it does allow you to control spawning...i'm putty sure you can set max lvls of different creatures
Hmm I don't recall a basegame config for specific dino max levels
Hello, just wondering, is there a setting I can put in my server to make passive taming faster? I don't want to make everything else instant tame, I just want the passive tames to get a higher percentage and not as long of a wait in between feedings
For higher percentages you would have to use the global taming speed setting.
For shorter intervals/wait time, there is a passive feeding multiplier that you can use
Oooooh Okay I'll take a look at that then
Has there been any talk of when ps5 players can join friends on pc in unofficial maps crossplay on everything else but not there as me and my friends play on other servers but we want our own setup
You've been able to crossplay on unofficial on Ascended since it released.
You're not going to be able to invite people from your Playstation to another platform because that's not how Ark is coded. You'll have to just give each other the server names and passwords.
So when my friend set a server up and made a passcode I searched for his name but couldn’t find him
Sorry I meant non dedicated
You didn't say nondedicated, so I thought you meant normal unofficial. Nondedicated likely won't ever be crossplay.
Yeah I meant non dedicated haha, I don’t understand why tho 😔
Thanks for help tho
It just isn't coded that way, and it's the least used way to play with others, also least recommended
Is there no way to solve it? Are all servers like this?
No, not all servers are like that, it's still not a server setup issue.
Is there a away to by pass the wind turbine decay on unoffical. I just lost a bunch of stuff because of this new update stuff
well, once you know the time it takes to decay they can add a backup generator mid that time.. that way your players will always have an overlap with the least amount of effort. Or if they have bob's and access to 100 black pearls to craft the thing have the robot, sir weirdsequenceofnumbersandletters autorepair it.
it's a relatively new setting, on previous additions (wind strength) and decay/turning off due to sand/electrical storms, both got an ini variable to turn it off.
let's hope some of those devs still work at wildcard
I also boosted my decay rate by 5 for structure & creature decay and . 75 for crop decay speed (makes crops spoil slower). I haven't tested the wind turbine since the update though, I'm on the island trying to finish the bosses
Wait I got confused on crop decay, it takes longer for my crops to die without water
Spoiling is at 15 for items, 3 for corpses
@humble thicket Your message has been deleted because it contained a Discord invite.
Can i ask here for single player modded?
Sure. What's going on?
Ok having issues with the baby care timer
No matter what I do it stays around 15 hours etc to even have one care imprint thing
What do I do to say take it down so it needs an imprint every few mins or so 10mins give or take that kinda thing ?
Can someone help me.
I clustered my servers. I can upload Dinos and items but can’t download anything. I don’t understand what is wrong.
I am currently testing everything. I uploaded a Dino on server 1 and just made and attempt to immediately redownload it into the same server. I can’t download load it back though.
Is there a list of what mods are causing issues for boost’s servers right now?
Why can nothing in this stupid game ever work
there is a setting in the GameUserSettings which turns off downloads entirely. maybe you set it?
Game.ini (might have to create it). dont know the exact wording of the setting. something like BabyCareIntervalMultiplier. set it lower to reduce it. but you might want to increase the ImprintMultiplier at the same time or hitting 100% will be tough to impossible
Thanks I’ll give it a try
Unfortunately didn’t lower it at all
Stayed same
[/script/shootergame.shootergamemode]
MatingIntervalMultiplier=0.05
EggHatchSpeedMultiplier=20
BabyMatureSpeedMultiplier=10
BabyCuddleIntervalMultiplier=0.05
BabyImprintAmountMultiplier=5
these are my settings. and it works for me. within the Game.ini
I’ll copy that in shortky see if it works
Hello 🙂 We used DynamicColorset in Dynamic Config. After resetting the INI to Default, means without DynamicColorset, the colors still there after dinoWipe and Server restart.
Has somebody noticed the same? Did i missed something?
How can i increase dino spawn rate in singleplayer in ase?
In Ark PC Survival Evolved, I cannot enter servers that have mods. A window opens for me that says:
Joining failed
Connection Timeout
@restive heron for a cluster you do not need to upload anything. just transfer maps at an obelisk and everything in your inventory comes with you
Hey any apps to make settings management easier on Linux for evolved ?
Also does someone know how often the server saves ??
every 15 minutes
I want to host 2 servers.
The Island.
Then a second server to rotate though each map every 7 hours
I'm on Linux, how could I achieve this? (I already can run the servers, just trying to figure out how to automate the switching)
That would be... interesting lol.
I just tamed my first dino guys! crashes out Maps gone. On to the next cluster.
any of you having battle eye issue on ark survival evolved xD since asa is still bugging for me now i can't play ark evolved i keep getting battle eye client not responding am i banned or what if so why i did do nothing wrong ?
Anyone else having their server stay on ticking loop? I did the update that dropped on the 1st, and before that it would be ready in 3 minutes even with a lot of mods on older windows hardware.
Hi idk if its even a correct channel to ask but anyone know a mod that shows Colors and Stats for Player and Dino's in inventory just like nucleus mod? Im asking because i really would want this but when i played with nucleus mod i noticed small fps drops and when i turned it off it was fine i know strange
anyone have some advice to making the characters being lost less of a thing. People on my cluster cant go 24 hours without losing one
i got ways to restore but i just want it to stop. This is crazy that in 2025 this is still a problem
It would probably be better to rotate the maps ever 24 hours instead
No, I like the slight offset. 🙃
When I was on windows I would use ASM.
It would send message banners that it was about to shut down the server?
How can I do that?
I have an ark game server I want to restart every 420 minutes. (7 hours hehe). That's the easy part.
I have an ExecuteStart with custom params that tell the server which map to load. example params: MapName?liesten?SessionName="Test"?Port=7777?QueryPort=27015
I have 12 maps I want to rotate through.
How should I loop through these to change MapName?
I have no idea how to create system services xD (arch linux)
im confused. so add -usestore to my server start config?
im a worried about doing this. Any chance you could give me a step by step guide on this? I feel like if i fuck up all my cluster is gonna go apeshit
we just restarted like 1.5 weeks ago
its a tad confusing when i read it
doesnt say where to put these commands
So Step one:
launch server with -converttostore -usestore
Step 2: remove -converttostore on next reboot
is that the jist of it
based on that it should fix all our character issues
and people shouldnt lose anything moving forward?
It seems to happen on logout and server transfers
thank you
going to do it now
is there any indicator that it converted?
just followed the steps and everyone on reboot looks the same
oh i see it working its magic nvm
so next reboot just remove the convert line eh
you rock
if this fixes my issues ill be so pumped
hey, could i get some help please? i host a dedicated server on my own PC, and i have a server for every map including astraeos. i last played the 1st of march, and i havent had a server open since then. they used to work just fine, but now they get stuck on "booting..." and dont fully open. im not sure what could have changed... should i just leave it when i go to work and see if its just loading the, like, 70 mods i have loaded? or have the server map names changed, like, is it not Astraeos_WP anymore? im just unsure. please help!
if I specifiy a server password in the config file, and pass one as a command line argument, which one gets used?
what about gamesettings.ini vs game.ini?
I see repeated settings in each. Which ones are used?
(wtf kind of config system is this xDDDD)
why does ShooterGame/Saved/Config/LinuxServer get wiped and reloaded on server restart?
Have you tried loading a previous server save/world backup? On Nitrado their servers can get stuck in an infinite restarting loop sometimes (just helped somebody else deal with it after recent major update), and almost always in those scenarios I can fix it by going back and reloading from the most recent world backup that isn't the current (and then working backwards to find a world backup that functions) until it boots correctly.
so.. all I've changed in the generated config was max player from 70 to 69.
start my server and it wipes the config again...
I think I just need to move some of my command line options into the gamerusersettings file..
I think the command line options are causing the regeneration of the file. (Even the default one gets reset on restart).
Anyone able to set the stats per player /dino multiplier ?
As tries to configure it in server but won’t seem to change at all
Tried restarting etc nothing
Tried setting wieght so it gets 100 per stat in it etc
fuck ty
that solved everything. golly
I thought it solved everything... jesus... it just took a minute to reset again....
from what I can tell, I can't edit gameusersettings.ini directly. I have to use command arguments to alter/generate them.
so be it...
game.ini gets reset too.
I can't pass those options through command line......
I'm gonna smash my head into a wall..
Awesome, I’ll try this when I get home. Thanks a million :)
Hopefully that works for you when you try it out.
I can't figure it out. I see GitHub issues, reddit posts, and steam posts, but nothing works for me.
My .ini's keep getting reset on sever start.
Even freshly generated default ini's overwrite themselves.
Idk what to do.
Is server self-hosted or Nitrado?
Self hosted
Must be some option/error in the 3rd party program or something then
Or perhaps even an actual option, potentially for... testing? Idk
It's self hosted...
There's no third party.
Only time I've had .ini issues is when server/etc wasn't properly turned off, so .ini values weren't saved/applied.
Hmm
You wrote the program yourself to host the server?
How do you edit the gus.ini and game.ini? Can you not see them normally? I just now saw your previous comment.
Prior to the one I originally replied to
I go to ShooterGame/Saved/Config/LinuxServer/
Open the .ini in my text editor and save it.
Why LinuxServer
Cuz I'm on linux
Ok
Have you tried going into Windows server and editing the ones in there
Just to see if it saves what is edited in there
But the file get overwritten/reloaded every time I start the server.
Even leaving it at the default settings, you can see it gets reloaded by looking at the files last modified time.
The path is correct, I don't need to use WindowsServer
Ty for tryin though
Used the right header?
Yeah...
Even using the default file, it replaced itself on server launch
Everything In Saved/Config gets reset, even if it's default files generated by the server itself, they reset every time.
Passing command line arguments like ?MaxPlayers=69 works, and generates a GameUserSettings.ini with the correct line.
But Game.ini is also being reset, and I can't pass options through command line for this file.
hello, I'm running an ark server but i need assistant for the setting and made configuration and install some mods if anyone can help let me know, imma gonna pay for ur time.
Go on yt m8 find kiahonark she has a set up vid that might help u if not there are a few others on there
ive bought it from ulta host theres no video on yt for it
just to check, you have the server off when you make changes, the server writes it's config when it is shut down, so it overwrites changes you make when it is on
hey if I let a dedicated server run without anyone online, will the dinos starve, days pass and so on or is it paused for as long as no one get on ?
if it runs, time passes with all it's implications
hello I'm new and I don't know which button to change the wall. I have basic settings
Ok so nothing I do is working for stat increases both dinos and player
Ideally want weight to be heavily increased
Tried 25 per stat , tried even putting it up to 1000
No matter what won’t change can someone tell me what’s going wrong
When I had a ase pve server this worked
Even looked online apparently a lot are having same problem
has anyone ever used tebex to do a cluster server shop. I am struggling with it lol
hey, is there any fix for "no sessions found!" ?
PerLevelStatsMultiplier_DinoTamed[0]=2 PerLevelStatsMultiplier_DinoTamed[1]=2 PerLevelStatsMultiplier_DinoTamed[2]=2 PerLevelStatsMultiplier_DinoTamed[4]=2 PerLevelStatsMultiplier_DinoTamed[7]=2 PerLevelStatsMultiplier_DinoTamed[8]=2 PerLevelStatsMultiplier_DinoTamed[9]=2 PerLevelStatsMultiplier_DinoTamed_Add[0]=2 PerLevelStatsMultiplier_DinoTamed_Add[1]=2 PerLevelStatsMultiplier_DinoTamed_Add[2]=2 PerLevelStatsMultiplier_DinoTamed_Add[3]=5 PerLevelStatsMultiplier_DinoTamed_Add[4]=2 PerLevelStatsMultiplier_DinoTamed_Add[7]=2 PerLevelStatsMultiplier_DinoTamed_Add[8]=2 PerLevelStatsMultiplier_DinoTamed_Add[9]=2 PerLevelStatsMultiplier_DinoTamed_Affinity[0]=5 PerLevelStatsMultiplier_DinoTamed_Affinity[1]=5 PerLevelStatsMultiplier_DinoTamed_Affinity[2]=5 PerLevelStatsMultiplier_DinoTamed_Affinity[7]=5 PerLevelStatsMultiplier_DinoTamed_Affinity[8]=5 PerLevelStatsMultiplier_DinoTamed_Affinity[9]=5 PerLevelStatsMultiplier_DinoWild[0]=5 PerLevelStatsMultiplier_DinoWild[1]=5 PerLevelStatsMultiplier_DinoWild[2]=5 PerLevelStatsMultiplier_DinoWild[7]=5 PerLevelStatsMultiplier_DinoWild[8]=5 PerLevelStatsMultiplier_DinoWild[9]=5 PerLevelStatsMultiplier_Player[0]=5 PerLevelStatsMultiplier_Player[1]=5 PerLevelStatsMultiplier_Player[3]=0.5 PerLevelStatsMultiplier_Player[7]=10 PerLevelStatsMultiplier_Player[8]=10 PerLevelStatsMultiplier_Player[9]=10 PerLevelStatsMultiplier_Player[10]=12.5 is what I'm using for a very lightly boosted stats. this is from my Island server where I have max level set at 750.
[0]-[10] are the individual stats from health to speed (I also have speed leveling turned on)
I use beacon to do that bc I will forget which number corresponds to which stat if I try to do it manually
Good afternoon, I have a problem where I can't add my friends on Ark, it appears that my tribe is full even though I'm alone.
there's an ini setting for tribe pop. set it to zero for unlimited. MaxNumberofPlayersInTribe=0 put this in your game.ini file
0 is unlimited, and you can pick a number if you want smaller tribes.
Not sure who to @mention, but 8 out of 9 servers all started and ran the first time after this update. that is a huge improvement
What about transferring dinos?
I'd cryo them
when I moved maps on the cluster I played on with others, we'd put the dinos in cryos in our personal inventory and transfer that way
I always had a land mount and flyer in my pocket if I was going back and forth to get stuff
I heard way too many stories of dinos getting messed up on transfer if they were out
Use any cryopod/cryo-mod. anything in your inventory minus trophy items can transfer between maps
Yeah...
I just started from scratch..
Installed via steamcmd.
Started the server.
Stopped it.
Made a single change in the .in max players from 70 to 69.
Saved.
(Closed my editor)
Started the server.
Waited, and tested connecting from a client and the browser lists 70 max players...
It is resetting itself.
Is using Ctrl+c the wrong way to exit the server?
ctrl c in terminal is interruption signal (SIGINT) and the common way to shutdown a cmd/terminal/bat program
yes. you crash the server if you do that. you need to close down server with doexit command
Some programs don't respond appropriately to CRT+c interrupts.
Like a java Minecraft server you can use /stop to exit. (Ctrl+c works too, for Minecraft)
But I just wanted to make sure it's alright for a ark dedicated server too (on Linux)
doexit
Lolz alright 🫡
Ty I'll see if that stops the configs from being overwritten
cheat doexit in terminal or your rcon
Hey guys. I’m trying to figure out how to increase the amount of rafts/motorboats per tribe on my Nitrado server. But I can’t figure out how, or if it’s even possible to change. Anyone know. ASE if it matters.
I self host so I can just type it directly into the console
They count as platform or structures in tribe/global limits, you would need to increase those configs.
Oh ok cool thank you
Typing doexit in the terminal did nothing. Server is still running.
because you on linux and prob running it in background so you cant get to the unreal console where you would have to type that
even running it forground i dont think you can see the unreal console on linux lol
Whats the setting or config that i need to enable to allow unclaimed dinos to be killed on my pve server?
the binary is what opens the unreal console on windows, linux i dont think it does that
i just use rcon to stop mine lol
That is on but still cant kill unclaimed babies with my dinos
Nvm it turned off somehow lol
Wait no its not lol
I've never used rcon.. no idea where to start with that.
This is the log I get:
Shutdown handler: initalize.
Using binned.
4.5.1-0+UE4 7038 3077 404 10
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Setting breakpad minidump AppID = 346110
doexit
you need to type cheat doexit
not just doexit
no
do that to all my servers in cluster
means you using some sort of manager or plugin for your rcon
I need you to tell my servers this via Battlemetrics, cuz I need to type cheat as well
Or it ignores me
dude i can literally record you a video and show you that without cheat it wont work lol
I don't want to go back to windows.
I could use ark-server-tools, but I just wanted to get a simple server going first... I know how to start and stop the servers. (unless crtl+c is the wrong way).
I want to know why my configs are being reset before I even add in ark-server-tools
Ok might want to let peeps know that then. Battlemetrics is pretty popular these days.
i dont even use rcon i just use a server terminal lol
no making blanket statements when you dont know what rcon they are using lol
cheat doexit did nothing
doesnt work on terminals without cheat, 100%. unless linux is any different cause i just use win 11
Thats all Im saying, might want to not correct everyone without taking this into consideration
Dear god, just nvm.
Carry on.
Love you
just did typed doexit to one of my terminals and guess what, did nothing. or need a video proof? 😂
xD
In every scenario, yes please
arent you the same person who was claiming that ?port= in command line works for you when it doesnt for most of the people? what kind of os you even using lol
?port in command line definitely works
from gamercon_async import GameRCON
import asyncio
ip = "127.0.0.0"
rcon_port = 27020
rcon_admin_pass = "somepass"
async def shutdown():
client = GameRCON(ip, rcon_port, rcon_admin_pass)
async with client as pot_client:
shutdown = await pot_client.send("DoExit")
asyncio.run(shutdown())
``` quick easy way to run rcon command with python lol
you do need to do pip install gamercon_async its not build in
Now do it on rust
dont know rust
my discord bot is written in python and i use gamercon_async with the bot to do a few differnt rcon commands to my servers in my cluster
If I can connect in game I don't need rcon right
Just admin cheat then does it in-game console?
yeah can do it that way also
Cool
I mean, not really, but cool. This is a bunchaa hoopla. But cool
We'll see if my config gets preserved.
Literally single line change to max 69 players
🤞
if you just need to change your player count you can do it in command line with -winlivemaxplayers=
then use ?MaxPlayers= if its ASE
I can’t seem to find the setting. All I can find is the setting to increase structures placed on the rafts. But not the total rafts per tribe. I would like to increase it from the base 2 to 4 rafts per tribe.
how are you searching?
This is something you will need to add to your ini settings via "Config Files"
Find the appropriate setting on https://ark.wiki.gg/wiki/Server_configuration then check which file to add it to, then add it in Config Files.
Use Ctrl+F to keyword search for the settings you need
Alright. I’ll check it out
No I need to change a lot more than that.
That's just an example to know things aren't being reset every time the server starts.
Game.ini gets reset as well, I can't just pass those options through the command line.
There is a deep issue I can not figure out that keeps resetting my config files on server start.
Even the auto generated files replace themselves
I just tried to gracefully shutdown the server but I can't enable cheats without setting an admin password..
So I gotta shut it down the dirty way..
Starting now with an admin password.
I'll get in game and try doexit.
Then I will edit my config. (Change 70 to 69).
Then I will start the server and see if it overrites it.
just remember that if you have a line in command line that set player numbers to 70 it will take priority over any ini configs
Yeah, I get that
Okay, server shutdown from ingame via doexit
Server down.
Config file updated to 69 and saved.
Restarting 🤞
Nope, still reset on server start
kms
I've never experienced such struggles
Does Ark take bug fixes still? This game still gets updates right? Should I submit one at this point?
if its ASE i dont think anything gonna change
I know I'm a little late to this party but did anyone else have an issue with their astreos server getting stuck in a booting loop? If so how did you get it to work finally?
How do o fix this bloody time out nonsense
Not had this issue at all untill earlier (ironically around time they posted bout a bug fix or something)
check if ActiveMod= is in your ini and delete it if so
Could use some help. My cryo sickness timer shows up 300 then disappears instantly. When I throw cryos back to back it says there cryosick but there not they dont come out knocked out.
I seen a few people having that issue, not sure whats causing it, went thru each setting in gus, nothing is out of place.
One of my players accidentally deleted his character. What command gives his exp back along with bosses he defeated because the commands I’m using are not working
GiveExpToPlayer for the player, https://ark.wiki.gg/wiki/Console_commands#DefeatBoss for the bosses
https://ark.wiki.gg/wiki/Leveling#Character_Levels < this will have the amount of exp you'll need to add for their levels
Hi, I have a small problem. We (accidentally) shot the red rifle in the Astraeos tower on our unofficial server, how can we fix this?
I haven't been able to give bosses on ASA dedicated, I know it works ASE
I have hosted two servers on Nitrado, set up crosstravel, and configured everything. However, when I join one server from the other and try to take my items from the Beacon, 'Refresh Tribute Inventory' keeps flickering continuously. I can neither take items from the Beacon nor travel back to the other server.
What could be causing this?
Server restart or you have to spawn in the terminal with commands
So I need to replace my long neck dinos in my server with something else
How do I got bout this as this part is new to me
I've been dealing with the same issue for the last 8 days
So most of mine is long neck dinos
It was a problem in ase we got rid of /replaced and it semi sorted it
But yeah it is a problem
Anyone having trouble finding servers on the list? I'm from STEAM and I can't find anything...
whats admin command to unlock all boss levels and notes ?
if you in ASA don't think we have that functionality yet, least last time I tried
I was looking into using my 2nd pc as an ark server. Would I need to rebuy premium mods again to use it on that hosting pc?
good question, cause afaik, most people use anonymous login to download ark server stuff from steam. So, thinking premium is client side "check" not server side right?
I think. I thought I could just use the same steam account on both PCs. But wasn't sure since I never done it before
I do an anonsteam server for mine, and I have premium mods + cosmetics. I just added the mods to the server and it checks on my client side
no, dedicated servers don't have to have an account associated with it.. if it's your first time I recommend something like Haruhost it will get you up and running pretty quick.. usually the only thing is opening the ports on your router like 7777/22024 and firewall on pc. Which usually when there server starts up windows will say hey you want to allow this through the firewall
Haruhost is a server manager you install on your pc, and @last magnet Ainsley, that is what I was thinking, just never loaded used a premium mod yet.. but figured it was client side. I know the people on my server would have a cow if they had to pay for a premium unnanounced 🙂
i suppose people who don't have it, will be stuck with freemium version
for sure! I run my server for myself so it's not a problem, and I'm super glad they do have freemium options now
Thank you all for the help! I'll give it a shot and see how it goes 😄
😢
ya thinking like bobs tales or the dreadmare, the people without can see stuff, just can't do as much with them.
good luck, the first time is wierd, but you will be clustering soon enough 🙂
Thats the goal! Its for me and a few friends and we'd like a small cluster xD
then plan for the future like come up with a range for the ports that you have forward in your router.. like if you are planning on running 3 servers, do something like 7770-7775 and 22040-22045 udp/tcp the first set of numbers is what the clients will connect to, and the second set is for RCON control.
clustering gets a little more complex, but done from the commandline to launch the server, each server will have basically same launch command..
ArkAscendedServer.exe Extinction_WP?RCONEnabled=True?Port=7763?RCONPort=27043?ServerAdminPassword=NotSayingWhatThisIsInDiscord -WinLiveMaxPlayers=10 -clusterID=abc123 -ClusterDirOverride=C:\ArkCluster\ -mods=940975,950914,978309,929420,928548,935408
i personally like to know exactly where the ClusterDirOveride is, so I can share it with other pc's on my network, cause I only run a couple of servers per pc.
the clusterID is the directory where the players will go to while the old server removes them and the new server picks them up from. But I call it a directory, only cause the server makes that directory under the DirOverride statement
what are the best shader options for you with commands starting with .r for more fps ?
I find r.VolumetricFog 0 work great for me, I get 60fps on medium settings with a 3070 Ti gpu
Does anyone have a problem where on some maps you can't place down building pieces from mods? 2 of my 4 maps in my cluster started having this issue recently and I have no idea what it could be.
if the mod is installed on each server, trying to force reload of mods may help
cheat RedownloadModsOnServerRestart
It's not one mod, it's most building pieces from most mods
Though I can try that anyway
good luck I hope it works
Is there a place I can ask for help on ark dev kit?
Grab the modding role in id:customize , and then you can use #modding-general/ #1167978209246195733 , or join the Ark Modding Discord which is pinned in #modding-general
Thank you, I had the role selected, it just wasn’t added to my channel selection.
Discords channels and roles feature is a bit goofy sometimes, yw though
Can't seem to get the cats on my server... What am I missing? What part of the spawn system they linked too as I do have a couple types disabled like the pegomastex and the itchy bird... Basically the stealing types are removed from my server
did you do a destroywilddinos?
ya not sure if the bird would be part of it, as I have seen them inland quite a ways, maybe shares with pego/compy?
I guess I could test it out to let people know if they run into the same issue I have lol
ya would be useful info if you figure it out
Wife got different info... Stating they spawn in very specific areas
Attempt 2 👀 lookihg at discord bot
Ok so message chat in game no matter what we put words wise just appears as stars and doesn’t show the words we type ,any idea how to fix this or what’s causing issue
Can I host a dedicated session on my laptop for my ps5 to play on ase?
unfortunately, I don't think there's anything that can be done as it's (sadly) strict console censoring that I believe Microsoft seems to have set up. have to avoid saying words like " lol " as it censors completely for xbox users
It wasn’t even bad words it was normal words
I wrote to my tribe mate
Hi are we hunting bosses or heading to carno island again ?
And that got starred ??
Nearly anything gets starred
anybody can help me find the launch argument for love ascended colors?
ASE or ASA?
ASA
You install the mod now, you will see a WildCard Studio love ascended mod on curse
i already have the mod and mod ID, i just cannot find what the color set options is called. now we are runing the pridecolors
oh then you are outside my knowledge, i just run with default mod settings 🙂
and you have the pink colors? like the love ascended dino colors?
ya I do, but had to do a cheat DestroyWildDinos to get them to spawn
oki that helps, thanks
Can someone help me out in ark
is anyone on pcc and maybe want tto tribe
who can learn me how to PVP on ark
Is there a way to have all engrams be unlocked as you level up? A setting I might’ve overlooked or something?
Got a server with some newbie friends and don’t want em to have too hard of a time.
Alright, so I’ve looked into it. I’ve added the line of code bAutoUnlockAllEngrams=true but it hasn’t worked?
what do primal fear mod do in ase? worth add it?
I was trying to ally someone and have orphaned all my structures and dinos. No one is in the tribe now and I have no way of getting back in. I have submitted tickets but it doesn't look like they are responding to them anymore. Does anyone have any help? I don't want to lose 3000 hours
so it sounds like you joined their tribe? I don't think you can do without an admin to force you to join your original tribe
A friend of mine is running an ASA server and wants to enable an event. Is there a way to do this on Nitrado? They tried to run the event colors for the Easter event, but no event colors appeared, even after a dino wipe. Any help with this would be great!
What is a good level to have stats per level increased by for humans and dinosaurs when I’ve got the difficulty set so wild dinos can be 150 max wild
Like I want human stats increased per level by like 10 extra but what is good for dinos so they aren’t super OP? It’s a pretty vanilla server just tinkered with some stuff. And want the dinos to not be too crazy.
Like going off what Nitrado says on the website with this code:
PerLevelStatsMultiplier_Player[0]=1
PerLevelStatsMultiplier_Player[1]=1
PerLevelStatsMultiplier_Player[2]=1
PerLevelStatsMultiplier_Player[3]=1
PerLevelStatsMultiplier_Player[4]=1
PerLevelStatsMultiplier_Player[5]=1
PerLevelStatsMultiplier_Player[7]=1
PerLevelStatsMultiplier_DinoTamed[0]=1
PerLevelStatsMultiplier_DinoTamed[1]=1
PerLevelStatsMultiplier_DinoTamed[2]=1
PerLevelStatsMultiplier_DinoTamed[3]=1
PerLevelStatsMultiplier_DinoTamed[4]=1
PerLevelStatsMultiplier_DinoTamed[5]=1
PerLevelStatsMultiplier_DinoTamed[7]=1
PerLevelStatsMultiplier_DinoWild[0]=1
PerLevelStatsMultiplier_DinoWild[1]=1
PerLevelStatsMultiplier_DinoWild[2]=1
PerLevelStatsMultiplier_DinoWild[3]=1
PerLevelStatsMultiplier_DinoWild[4]=1
PerLevelStatsMultiplier_DinoWild[5]=1
PerLevelStatsMultiplier_DinoWild[7]=1
What is a good level for these to be increased by so dinos are getting some decent stat increases but not OP
Hi, I'm trying to add deinonychus to my the island map server and cant get it to spawn. I've gotten rock drakes, griffins and shadowmane's to work fine, but not deinonychus.
ASE
@charred lotus Ask here for server help
how do i setup mods for my server... im using steam cmd to host it but where do i add the mod ids and such and where do i even get them if this is the way
Anyone able to help with astraeos mod to map set up? We had the map mod on our server we got the dlc and want to remove the mod to give more storage space.
you will need a mod to spawn deinonychus, they not out till valegro
as mentioned it is ase, they are already out on that one
Use simple spawners if you're using mods, that way you can use it to spawn the nests so they'll be tameable. If not, there's not much point to adding them to the island unless you just want them killable or forcetamed
any one know how to increase the cats to spawn on the island
i wouldn't do that, it makes the game really boring really fast if your stuff is too OP
don't ruin the new player experience for them, inform them of what to avoid doing, don't make the game easier, it already is easy enough
buf for server settings, this is probably a good place to start https://ark.wiki.gg/wiki/Server_configuration
I'd like to add a Rhyniognata to the Center swamp (min: 1, max: 2).
For this, I'm using the entry in the next paragraph in the game.ini file. Here, it's for the Maeguana. Of course, I'm changing it to the zone and the correct BP. The problem here is that 16 Maeguanas spawn in the zone. How should I change this for Rhyniognata so that only 1-2 can be there? EntryWeight and MaxPercentageOfDesiredNumToAllow are the adjustment dials for this. But I don't know how to handle them correctly. As I said, 16 Maeguanas are already too many 😉 8-10 would be ideal G. But 0 isn't an option either. Permanent min. 1, max. 2 (Rhynio).
ConfigAddNPCSpawnEntriesContainer=(NPCSpawnEntriesContainerClassString="SnowGrasslandsUnderArea_Spawn_C",NPCSpawnEntries=((AnEntryName="SnowGras_Under_Maeguana",EntryWeight=0.08,NPCsToSpawnStrings=("Blueprint'/Game/ASA/Dino s/Maelizard/Maelizard_Character_BP.Maelizard_Character_BP_C'"))),NPCSpawnLimits=((NPCClassString="Blueprint'/Game/ASA/Dinos/Maelizard/Maelizard_Character_BP.Maelizard_Character_BP_C'",MaxPercentageOfDesiredNumToAllow=0.03)))
Unsure why but stack mods seem to be causing time out issues
Not just on my server but few others I speak to
….
I've been trying to add aditional levels after tame Im able to make it reach 101 additional levels but i want 185 levels but it just wont work? (ASE)
does someone know?
LevelExperienceRampOverrides=OverrideMaxExperiencePointsDino=2000000
LevelExperienceRampOverrides=(ExperiencePointsForLevel[0]=1,ExperiencePointsForLevel[1]=15,..... ExperiencePointsForLevel[182]=131990,
ExperiencePointsForLevel[183]=133442,
ExperiencePointsForLevel[184]=134902,
ExperiencePointsForLevel[185]=136370)
TamedDinoCharacterLevelUpCount=185
DinoTameLevel=185
Add this config and then add a spawn blocker mod that limits spawns perhaps
Anyone know how to increase or decrease the day /night cycle (with nitardo )
do you guys know a reliable server rental site?
I dunno bout reliable think it’s depending on location etc
Nitrado isn’t great but …many use it
Gportal I’ve used for years they pretty good but don’t offer cross platform ark anymore
I’m not sure bout others as not used them
Can someone explain me how to work around on followed Issue:
Dino babys will not progress in maturating / grow after a daily Serverrestart till the region get rendered by a player
They go into stasis. Also mating cooldown getting stuck after
If I rent from this site, can I switch between maps? I don't need to buy another server, right?
a lot depends on how much memory and cpu you rent. roughly 10g memory per server, 2 cores.. so easy to make a huge bill. As far as them allowing you to do it in the first place.. not sure.
but you can look at the "cluster" options and see what they offer for configuration
Ok so
One map is start of the server
You need at least two maps to be able to transfer to and between
So one map is just one map , can’t transfer if there’s no other map to transfer to
Is solo farm mod not working for ASA steam servers? Custom levels and solo farm mods doens't seem to be loading on server start bat file
@fallow portal #bobs-with-probs
custom levels mod isn't working, the dev stopped supporting it. I can't speak for solo farm, tho
custom dino levels isn't working?
if thats true, you can use vanilla with Sprinkles but it does other things that'd need to be disabled
yeah that was what I was told, I stopped using it since it hadn't been updated in a while
Does anybody know where can i host a co op server with crypto without having to pay for 30 slots? 10 or close is fair
Anyone having issues with tribes? Suddenly all of the tribes on my servers are bugged
custom dino levels doesn't really need updates. the ASE version is years off and still works.
it was working afaik when astraeos released but maybe I just didn't notice.
hey guys, i host a dedicated server on my personal machine, and its been working fine, but i havent opened a server since the 1st of march. i have been trying to open them again since the beginning of this month, but they get stuck on an infinite ticking loop. id really really appreciate help on getting this fixed. ive tried to use older saves in case the current one was corrupted, and that didnt work. i also know that sometimes this can be caused by a bad map name, and im still just using Astraeos_WP. did the map names update? does it think im trying to use the mod map astraeos, even though i own the dlc and ive played on this server before? i just need some help please
if it stuck at line with Number of cores remove ActiveMapMod=0 from GUS
dude. my savior! thank you!!
ahh gotcha. I didn't notice much effect personally, and needed to cut down on the mod list
Custom Dino Levels still works for me, but basically the only thing I use from it is the equalized level range
I use the high levels. I is lazy
probably gonna replace it with vanilla with sprinkles tho, since that does other stuff too.
Anyone else started getting 1100 ping today?
Must be a skill issue
I'm testing vanilla with sprinkles on mine, little annoyed by all the low levels floating around
quick question, since the cats and deinotheriums have released they refuse to spawn on the server
no matter how many dino wipes happen. I can spawn them in but that is not a solution for our cluster. Anyone else having this issue?
this is for an unofficial cluster
Currently on one of our maps in the cluster - the rest are stuttering and rubber bandy - or just flat out crash.
using nitrado or a different host?
I've had decent ping and performance but I self host off a PC in my house
Hello, are there any mods that's similar to The Island Extension CIE? Where it includes all DLC creatures, resources and bosses?
Kinda like Ragnarok Plus but it's discontinued
anyone else having issues with the wild king titan not spawning?
Please, can someone help me or offer advice? Two of our self-hosted servers won't load anymore. Whenever it tries to load the Dear Jane file, it crashes with a "Fatal Error" message. What could be causing this? Mods have been checked and are all fine. The other maps (mod and base game) are all running fine. What could be causing this? Or what can I do?
it's safe to remove the dear jane mod, it's in game now.
@sharp otter
This channel is for discussions about unofficial (or single player) server setups including mods and other relevant topics. You can find recruitment and server advertising channels under the #bulletin-board-rules channel.
We don't use Dear Jane client side. It's the server what crash when it's loading it. It's not possible to remove it from the base game.
Dear Jane is a server side mod, not client, you'd need to remove it
We don't use the Dear Jane. My problem is server side and we never used it. When the server is restarted it loads the map and at the point when it loads the files from base game it crashes.
I must have misread this, sorry, where you said the mod was fine.
No problem, we checked everything what could cause this, bc all other maps of us are fine only two don't want to get up.
the activemods= line isn't in the two misbehaving servers? bc the only other idea I have is save the saved folder and reinstall the server from fresh.
That is checked too and no it's not what causing the problem. It's the same like on the other servers. Yes that's what we try now a fresh install and hope it fixes it. Thank you
hope it helps!
Me too lol
When will the game receive FSR4 support?
is it against the rules of the game to edit the engine.ini files to make the game look better?
No everyone dose it just do on pc / just google ini… i can send you a couple if you wnat
nono ive done it a couple of times already and ive pushed it quite a bit higher since my rig can take it just fine, i just wondered if it was "allowed"
doubtful
at least on unofficial, I know no one cares if you adjust for performance and quality
I'm using DLSS 4 through DLSS Swapper, check if there is something similar to this to FSR 4
Anyone else have issues on astreaos server? Random things disappear and show up at cords 50. 50.
A whole cryo of tames.
A library of blueprints
Eggs ect even a door at one point.
Characters even, when you render it you can see a cryo fridge in the air. And then it will just disappear
Anyone know of a mod or console command on ASE to use the “forcegivebuff” command on target instead of self/ridden dino??
Wondering if someone can give me some ideas to try please.
Cant connect to the island or forglar premium on just one unnoficial server.
Can connect to the map fine on other servers.
When i change from my wired internet connection to phone thethered internet I can join both maps on that one server.
Have tried re-installing game, uninstalling and re-installing all mods, resetting network adapters, DNS reset, reseting modem etc.
On Pc Steam
Hoping someone smarter than me can help?
Can very well have something to do with the server problem they are having right now. It's been a day and a half now and they're still working on it. Check out the status-updates channel.
If a mod was accidentally removed, is there a way to add it and rollback? Or will this not help
Are there any mods that adds all DLC contentes (resources, creatures and bosses) into a map? Besides The Island Extension CIE
are you blacklisted on ip on that server?
nope, can play the other maps in the server. it works if i turn on a vpn though? 😒
should work, if you can roll back to before the mod was removed, but you will loos progress ofcourse, also MAKE BACKUPS before you do it
well vpn means your ip gets changed, you just change the map, and then can't join anymore?
i can join every other map in the cluster but the island and forglar. I turn on a vpn and then can connect to all of them.
a cluster, is not a single server
i would contact the host, and have them check if you maybe got ip banned on that single map
is it possible to even do that? haha
i have contacted them, they couldnt figure it out either
are they hosting on nitrado?
yep
have them look in tools / player control / banlist
ok, will do. fingers crossed. thanks for answering
but wait, i'm still the same character on the map. what would banlist do?
does it ban by ip?
Hi ,
how is the unoffical going to work after the update with the mods?
All info that anyone has is here. https://survivetheark.com/index.php?/articles.html/community-crunch-451-ue-55-and-roadmap-update-astraeos-contest-winners-r2468
Hey, i have a second pc and i host the server there and is the gethostname error normal or is it just me and i cant see the server on the unoficial list and the steam cant find the server either
did you expose your pc ports in your router/firewall.. like port 7777 and 27042 or whatever you picked?
where can i find that if you could help me
your server startup script should have it, just make sure to mask out your admin password, none of us need to know that.
Black screen on island cant conect.
alr i will send it in a min
and before we go all router config crazy, we can test it "in house" but still need to know the port 🙂
Should i send it here or in dm?
you can do it here, that way if someone else has ideas they can be part of the discussion.. just don't send passwords
start ShooterGameServer.exe TheIsland?listen?SessionName=----?Port=7777?QueryPort=27015?MaxPlayers=10
exit
i think i downloaded it from some tutorial on yt
the password and the rest is in another file
you good, so the 7777 is the important part.. and assuming SessionName is not ---- but like SzomszedServer... if the server is running and ---- is something valid.. on your client
at the main menu or server select screen.
hit the console key `
then type open 192.168.1.50:7777 swap the ip for the ip of your server
that will make sure you server is running and you can connect to it.
ipv4 of the server will be easier, i'm not sure if open command even supports ipv6
i'm also asumming you doing a ASE server, cause all my ASA servers are like TheIsland_WP note the _WP
Yes ASE and where do i put the ipv4 ip in i cant open the console in the menu
lets try it another way
cause i don't even have ASE installed, but you can do it from steam
the ip:27015
alr i will try it when the server starts untill now i was using it with the 27015 maybe thats why i couldnt find it
ok for steam though under View you should see Game Servers
there you might be able to pick it
these are the last things it says should it say anything else or is it started?
[2025.04.09-15.58.23:591][ 1]Server attempting to run new years event
[2025.04.09-15.58.23:592][ 1]Sever Is not set to official or running NewYearEvent argument
[2025.04.09-15.58.25:389][ 45]Set New Years event location: -86711.156 - -171866.203 - 430.878
i think they always say that, but running on personal braincells
on the steam i still cant find it
and on the ase server select, do you see something for being able to type in the host?
like I think the ` key should work on the server list
or try the tab key
what you want is that little block box at bottom that allows you to type things
wont show up and the steam cant find any server from the adress
cant enter console in the menu
right the showing up in steam may require some router work, I want to make sure you can even get to the server locally
should i try to host it in the game at the run dedicated option
i dunno about that, but it will get you into console mode.. like if you want to cheat something in
cause all we want to do at this point is the open ipaddress:port
will it work if i enter the console at a singlepalyer world?
think so
going to try so i need to enter ip:7777?
well replace the ip with the ipaddress of your server
it wont work
ok i guess we banging our head on this cause I don't remember ASE that well.. so your router, what you need to do is make sure you are forwarding 7777 and 27015 to the ipaddress of your server
also what is the name of your server?
that varies a lot by type of router, what type do you have?
zte if thats the type
in the router configuration page, do you see Internet > Security > Port Forwading ?
or Application, Port Forwarding, Advanced?
i cant get to the router configuration page thats the problem
hmm.. a login issue or don't know how to.. like often it's like 192.168.1.1:8000 or something like that
i cant find the user or the password
ok let me install ASE, I'm pretty sure you can get to console without picking a server. will take a bit
i want to get you playing for now 🙂
Thank you,
Should I remove all my AA and CS or will it still work just with new bugs?
i will play it for a long time dont worry
ok in the game bottom right, where it says session filter, change it to LAN, and hit refresh
in the game, like you were trying to connect to a server
no sessions found
I have no idea what it will do, everything I know is in that link, same as everyone.
here is an interesting thing I saw on reddit.. but basically it calls steam to use the url launch.. I will have to dm you though
alr
As long as the mod gets cooked for the update it will work but there might be some bugs
Tbh If they recook them I dont see why I should remove them
Don’t just keep a backup save file of the server if the mod don’t work then the server won’t boot up unless the mod is removed that is causing it not to start
Hey, im searching a mod like Primal fear can you recommend some ?
Thank You Chris!
Could someone hop in a vc with me and help me, i dont know how to describe my problem without just showing it. I'm having trouble with my own hosted server, im hosting it from my laptop
So I've seen over the last year people have been complaining about dinos disappearing and not having any tracking information and nothing in the tribe logs.
This can be a single Dinos or an entire tribes Dinos (This is only referring to un podded dinos).
I've also check my servers logs and nothing is shown.
This is NOT the 50/50 bug. This is not Mod or API related.
Do we have any idea why this happens? Or is this just an Ark bug?
Thank you
Hi! Having issues on our cluster with cats and deinotheriums spawning at all, multiple dino wipes has not resolved the issue and im at a loss as we have 0 dino overhaul mods besides shiny which should not effect those spawns at all. I have been searching for a solution and see others have been having similar issues, but have found 0 besides "I dino wiped 6 times and finally found 1". I have spaced out wipes and made sure full spawn has occurred and have even cleaned out spawn locations repeatedly as well. I have tested spawning them in and that works just fine. Only map we don't have on our cluster is astraeos as the community decided to wait for it to be finished before buying.
deinos use the bronto spawn containers, so if you have adjusted spawns to lower brontos, you might not see a lot of drunk elephants
I've seen cats in the otter spawn areas (I personally made them admin spawn only)
and otters are pretty rare in general
I can't speak for other maps, I'm trying to finish bosses on the Island before I shift to SE
oh correction, cats are in the grasslands container (I use Beacon) and they only have 1 spawn at a 5% chance
both cats and elephants spawn in grassland container
Is there a reason the ini isn’t working to my item cap? Ppl are getting over cap bps from Extinction osds that are over cap, and even when transferred to another map it doesn’t reset them back to cap, same with the actual BP as well
there's a setting in a community crunch shortly after Ext dropped to manage that, h/o
#patch-notes message patch notes, not community crunch
Hey folks, Has anyone ever dealt with certain settings being overwritten/ignored? I've tried setting up a .bat file, Game.ini and GameUserSettings.ini. I am able to start a dedicated server, but there seems to be something not working properly. While some settings like SessionName and SeverPassword are working and saving, others like MaxPlayers are being overwritten every time. I can't get MaxPlayers to be anything but 70.
This is on a windows11 machine if it matters.
your command line overwrites it
Hello, we installed primal fear and eternal modes with my friends on the server, but eternal creatures are not spawned on the map, how can I solve this problem?
Yep, I have tried without any cmdline arguments and it still is overwritten.
And if I update the cmdline to have MaxPlayers=10 it still instantiates with MaxPlayers=70
ASA
how do i make the whole of breeding process FASTER 10x? idk the maewings things are taking 1 day! to mate again XD .. send help
ping me if you wanna help!
hi guys, I'm having a problem when entering a server or solo host, when I enter the solo host my game simply crashes with error 385.25. And when I try to enter a server, it doesn't enter and gives a connection error. I've done everything you can imagine, if anyone can help me I would be very grateful. Contact me in private if you have a solution that I haven't done yet.
mating interval should be less than 1.0 to make them mate faster. I have mine set at .25, and it's a 4 hour cooldown
or you can use a mod that has a potion that removes the mating cooldown
whats the mod called?
I use Crazy's Potions, but Gaia studios makes a potion mod too that has that in the free version
oh and Nanoh's makes a potion mod too.
Anyone know how I would add a 6x damage zone to some areas including rat holes on my servers?
thatnk you so much
welcome!
there is awesome admin tools which can add zones to areas that boost damage
Thank you. Is that zone identical to a 6x zone or does it make dinos take damage too?
I have no clue, I haven't tested it
Bronto spawns are not lowered. Its really weird nobody on the cluster can learn the saddle for deinotherium either.
When I try and gene scan for them it errors out for both cats an elephants.
An were at the right patch so idk wtf is going on.
Ive dino wiped multiple times and not one has spawned of either since they released.
do a file check / reinstall of the server maybe, sounds almost like the server isn't doing stuff properly.
oh, and do you have any stacking mods? i remember having problems with some stacking mod, and having new dino's to spawn, i think it was the gigantoraptor
What's the fix for servers looking gray on joinscreen and not allowing join? This is a self hosted server and it definitely is running
posted in wrong spot, oops
hoping this to be easy
ive got a cluster hosted locally. every server works except for my abberation. i have changed its ports several times, and none of the other servers have this. it shows up on browser, but you get lost connection or cannot connect to host
only thing of note is that it launches primal game data WAY faster than any of the other servers have. maybe its missing the map or something?
Anyone else getting 1100 ping / players unable to join servers?
Check your server on the same Major Update
No one on my server can sprint with aquatic animals in water. Does anyone know what could be causing this?
click the server, and hit refresh in the bottom right, it should swap to join then
thats is what I have to do too, but still wierd that it's like that in the first place.
Im completely stuck with trying to create a dedicated cluster server. Could someone help me out? I'm at a wits end.
How do you update it?
Does anyone else have this problem where the game keeps crashing whenever something is typed in the search bar, for example when I type “hide” my game freezes and crashes and rolls back my game (I can just save a bunch but it’s still annoying) anyone know a fix?
do you have all the start up scripts using the same clustername and directory?
ArkAscendedServer.exe Extinction_WP?Port=7762?RCONPort=27042?RCONEnabled=True?ServerAdminPassword=HIDDEN -WinLiveMaxPlayers=10 *-clusterID=mq212 -ClusterDirOverride=S:\ *-mods=940975,950914,934231,978309,929420,932365,935408,1179492,928548
ArkAscendedServer.exe Aberration_WP?Port=7761?RCONPort=27041?RCONEnabled=True?ServerAdminPassword=HIDDEN -WinLiveMaxPlayers=10 *-clusterID=mq212 -ClusterDirOverride=S:\ *-mods=940975,950914,934231,978309,929420,932365,935408,928548 -ForceAllowCaveFlyers
so the way I did it was have the cluster spot, right off a root of a drive.. the servers will make a directory called ArkClusters or something like that, then a directory called in this case mq212
it's really not a root drive in this case.. it's a shared drive so my other pc's running servers can use the same spot
Hey everyone!
I’m planning to host an ARK: Survival Ascended server with a peak of around 70–100 players online at the same time. I’m wondering what kind of Wi-Fi/internet connection I’d need to handle that smoothly.
What’s the recommended upload/download speed for a server this size? And would running it from home even be viable, or is renting a dedicated server the better move at that scale?
Appreciate any advice from folks who’ve hosted large ASA servers before!
Not sure if this is the right spot for this...
Is there a way to backup single player saves on Xbox? I setup a single player game so I can run it as a non-dedi to play with my son. It will play fine for an hour or two then crash. Once it crashes there's no going back. The game crashes every time I try to reload it either as as single player game or as a non dedi. Idk any way to verify files or troubleshoot like PC can.
I'm not running anything too crazy. x3 XP, x4 harvest, x8 tame, x20 raising.
Mods:
10k-90 stack mod
Cyber Structures
Dino Depot
Utilities +
Gaia Potions
Awesome Spyglass
Awesome Teleporter
There have been a couple times I've managed to get the game to load just removing 1 mod at a time and retrying, but the most recent time that didn't work. Game still wouldn't load after all mods were disabled and I had to start over. Just tired of constantly restarting.
there isn't a way to backup on console versions.
I'd suggest switching awesome spyglass with super spyglass + (awesome spyglass has stopped updating) same with awesome teleporter but don't know which you'd want to use.
as for the other mods, dino depot sometimes has issues on consoles, fixing it is slow due to no crash logs.
can always use other maps for testing if you aren't on them yet.
if its a series S the save could just be too much for the console tho.
j-teleporter is a good substitute, made by the same people who made gaia potions
also is anyone else having issues with black screen? I have to remove my player profile, and remake my character, then kill my previous body, and it happens any time I get host disconnected or log out normally. doesn't matter if I have engrams learned or not, or anything in inventory including skins. this is on The Island, and I own Astreos. Server starts and runs fine, and once I'm in, I have decent performance for my old hardware. I'm about to do commands to get my island bosses bc I can't get started on breeding if I have remake my character daily.
is it only the island?
as far as I can tell, I haven't tried on any of my other maps
my plan was island bosses then move to SE for a while, collect vanilla wyverns + SE critters, fight the manticore thn move to the Center
Hey, is there a way of adusting an event color spawn rate? I knew there used to be a setting for it on Nitrado's general page, but it's no longer there. on ASA.
the version is stuck on 358.24 (survival evolved) but the live version is 358.25, using the update button on the server manager itself does not update the server to 358.25
Is there a setting where i can bring down spawn rates on dinos in the caves on the island?
Hello I haven't played ARK for a very long time and even when I did I didn't get very far. I recently started playing again on PC and I was trying to build a raft to allow me to transport dinosaurs around the map. However I ran into an issue where you aren't allowed to place dinosaur gates on the raft. I searched for a while and found a thread that suggested adding the line of code MaxGateFrameOnSaddles=0. I tried this but whenever I launch the game the .ini file is reverted back and becomes unchanged. I know I should probably just use the cryopods but I don't want to progress progress that far yet. If anyone has a suggestion on how to fix it or a mod that could alleviate the issue it would be greatly appreciated.
put the ini file on read only
thank you that fixed the issue
Hi, I'm trying to edit my GUS.ini (GameUserSettings.ini) and my Game.ini to configure some mods I've downloaded. I can save the changes without any issues, but when I load the game again, the files revert to their previous state. I already tried setting them to read-only, but the game seems to load everything by default. I'm playing on PC via Xbox. I've read on somes forums that several people have the same issue, but no one has mentioned if they found a solution. I would appreciate it if someone could help me, thanks! (I'm playing in single player)
Does anyone know how to fix the lost/loadout connection glitch. I’m trying to join my friends private unofficial and it won’t let me join on either my Xbox or windows
Is it just your friend's server that you have a problem with and can other people join it?
I tested with my Scorched Earth server, transferred from the Island map with some essentials to start a base, and I managed to not have to remake my character
Not had the issue myself but it sounds like there's an issue with the map file if it's not happening with scorched, I would backup the file you have and start a fresh save on the island and see if it still happens
Just Wondering, Is The Tek Engrams Broken, I Run A Cluster, And Whenever i Was Trying To Do The Defeat Boss Command, It Wasnt Working, So Went To Single Player, Still Isnt Working
ASA?
yes
I'll give it another try (I wiped the map a couple of weeks ago, actually) once I move my critters over
doesn't work in ASA yet
ohh, alright
you can summon them in god mode though
even went in the boss fight and didnt get the engrams
now that is wierd for sure, which bosses did you do? dragon?
brood
ya that should work, not sure the problem would be. have you tried the kill yourself and relog?
personally, i have never seen that work, but that is what people have told me works.. maybe they trolling, who knows
but ya i was trying to do the cheat boss thing for other people on my server who don't have time to keep up, with those of us who do like to do bosses
then realized it didn't work like it did in ASE
yeah i try relogging, i remove all mods and coding for my testing map, and i got nothing from it
there is something else you can do, but it's kind of radical
There is a mod called Shiny!, but it's intended for pretty dinos.. well there is a setting to learn engrams from killing enraged Shiny's.. and you can adjust the configuration to determine how many engrams you get per kill.
doesn't help understand what is broken with your server though.. wierd for sure
So I am version 64.9 on server and 69.1 on client. I think these are the most up to date versions. My server is on and advertising, but th client can't detect it (it shows grayed out) any fixes?
and the refresh on the bottom right, doesn't turn into join?
My friend who owns it can join, but I’m unable to on both my windows version and Xbox and I can also join any other server
Is there a way I can give a player all explorer notes
no, the command is for the player to use
only way to give them admin, and let them use the command then take away admin right after
well not only way, but quickest way
Is the server player hosted or nitrado?
Suddenly my maps on my dedicated server no longer load mods
Error:
LowLevelFatalError [File:C:\j\workspace\RelB\Projects\ShooterGame\Source\ShooterGame\Private\ShooterGameInstance.cpp] [Line: 832]
Requested mods failed to load on server.
No matter which map, no matter which mods, what's going on?
Okay thank you
Curseforge is having issues apparently
but why is my another server starting the maps? its only one of my two asa servers...
[2025.04.11-10.55.55:541][ 0]LogCFCore: UserContextInfo not loaded from disk
[2025.04.11-10.56.05:606][296]LogCFCore: Error: Error querying server mods: ApiError: Failed (serverUnreachable)
Yeah so that last error is the clue that it's not on your end, couldn't tell you why it's only one of your servers, but will just have to wait until curseforge sort it out
thanks for the answer
Yeah it's XSS. Looks like I'm screwed. 😔
When I get the same error, after about 10minutes of the last boot the next boots fine, might be the same
We have an issue where the dinos wont eat if nobody is online, this can be annoying for raising baby dinos as it requires you to be logged in to prevent the dino from dying from starvation, i'm just looking at "-preventHibernation" and i'm wondering if this would fix it or whether there's another setting that I could use?
That is only for singleplayer that one
I use the Hitching post in the CS Mod to keep dinos out of stasis
ah you're right, sad times
Yeahh, I hate the new stasis thing for dinos eating too 😦 lol
Halts breeding when offline too
Nitrado
unacceptable
I would have your friend contact nitrado about their server, it sounds like a networking issue
Ughhhh, thank you I hate contacting those fuck heads 🤣
yeah i gave up on them long ago lol
did discord take the option away for example me having the announcements from this discord post in my own discord?
No, but this also has nothing to do with unofficial server setup help.
Do we know anything bout what’s happening on 15th ark wise
As nitrado has a note out bout a system change etc on 15th does this coincide with arks system update ?
Any information anyone in this channel would have would be in #announcements.
I see ok thanks
Just trying to prep just incase servers go ts up etc
I was getting this one too. Apparently it has to do with certificates?
no it was just cf error
Yeah was certs for a couple other people too
Do i need to update my servers? If so, how? Is it the same code you type in steamcmd to install it?
Removing deprecated amazontrust certificates and re-installing solved it for me
I have this issue too, how did you replace the certs ?
hello i got a question, my friend and i have a own server on ark survival evolved, but the server is offline and he cant get in the panel anymore, does anyone know the problem?
I found a random post on Google that seemed safe tht did it
what do I do about mods missing a module?
It is related to Amazon certificates on Windows. We've found that reinstalling these files will resolve the issue, the steps are:
Visit //www.amazontrust.com/repository/
Download each of the DER files (image attached)
Run each file, click on 'install certificate' > 'local machine' > 'automatically select the certificate...' > 'finish'
Launch the game, try to install a mod
do the above 🙂
Delete this file ShooterGame\ModsUserData\83374\library.json and it will go away, It will recreate itself on boot
same issue here
doesn't work
Damn might be different missing module error
My server wont start:
LowLevelFatalError [File:C:\j\workspace\RelB\Projects\ShooterGame\Source\ShooterGame\Private\ShooterGameInstance.cpp] [Line: 832]
Requested mods failed to load on server.
Is curseforge down or whats the problem?
i have a question i need advice on, me and 2 friends are beginning our ark journey which means we are starting on the ark survival evolved, we use xbox series s after watching many videos we realize you can play on a server that has a few mods, so we want to create our own server just for us boys. how do we go about doing this ? does one of us have to buy the microsoft pc version and get a server provider and will that allow the server to have a few mods like “Pull it and Ark automated” for us xbox boys to enjoy? can some give us some directions we want to have a good ark experience
ahh i hate this cert crap. thx this fixed this problem!
i used linux for ASE for 4 years and i loved it.
But when ASA only came out for windows I couldn't get it to run on linux and had to switch...
How did you get it to run?
had a lot of problems with it.
Maybe next year when my kid goes to kindergarden i will do another try 😅
thx for the infos 🙂
you won't be able to play with mods on evolved, mods came to console with ascended, but you can start up a vanilla server through the microsoft store version of the game and running a player dedicated server
ok thanks
ive tried hosing a server on like 5 different applications, and when i try to start it they all say "ArkAscendedServer.exe could not be found"
anyone know why the new cats would not spawn?
Anyone know if the recent patch that broke cryofridges applies to unofficial?
Anyone know how to get around this issue? 🙏
Error querying server mods: ApiError: Failed (serverUnreachable)
to which of the DER files does the not-attached image refer?
anyone know what the cats share a spawn with? my players are not seeing any spawning.
that actually worked. thanks. fighting with ASA every other month is exhausting lol
its painful when this happens and little information to help you
at least you know for next time
Thanks for this fix, is there any documentation as to why this is necessary?
odd, because my OS running the game instances is Windows 10 Pro, consumer version.
well tank you for helping everyone else and not me
My friend is confused on how to activate an event on an unofficial server on Nitrado. Where do you go to enter the "-mods=ModID"
ohh okay thank you! Do you need to wait for the actual event to start, or can you run it whenever?
anyone having problems start their servers???
LogCFCore: Error: Error querying server mods: ApiError: Failed (serverUnreachable)
@polar echo Thankyou for the quick reply, fixed me up 🙂
Duno why it stopped working
On my server, our babies keep dying when we log off even with full food. Is there a way to fix this?
Just to confirm, its version 64.11 where everyone lost cryod dinos right?
We still waiting on the Mod to show up??
Can anybody start their server? I am receiving the error message that the mod API is not reachable and thus the servers don’t start anymore
Okay sorry I should have read before, somebody wrote about that
Does the dedicated server use/benefit from a GPU? Or is it just ran by CPU?
My Linux server is hosting a Windows VM on my spare PC. Ark runs on windows, but my server is only getting less than 20-22 fps instead of a solid 30 (or 60 when I update the ticke rate) like it does on a bare metal instance of windows.
(Checking in game via setcheatplayer true)
Nope, Just CPU amd Ram
Bugger, I wonder why the low fps..
Network slams 1 gig just fine, CPU passes CPU-z bemchmark alright.. (even though it's virtualized, it's not running outta ram....
🤔💭
It is related to Amazon certificates on Windows. We've found that reinstalling these files will resolve the issue, the steps are:
- Visit
amazontrust.com/repository/ - Download each of the DER files
- Run each file, click on 'install certificate' > 'local machine' > 'automatically select the certificate...' > 'finish'
- Launch the server
Ark is native Linux, no proton needed
I tried, got a server to start
Tried to edit config, saved it, started server and it would wipe my settings.
Come time to find out certain settings have to go through the command line in with in some order "?port" has gotta be upfront, and some have to go into GameUserConfig.ini.
I wasn't gonna sit and restart 100 times to figure out which ones go where.
It was wiping my game.ini and engine.ini (for tickrate) as well.
So I asked here and everyone asked me why I didn't just run on windows and use ASM
Now I should just run Linux native (which I would fucking love to do), but at this point I'm fine with the VM.
I fixed the small performance issue I was having now I just gotta uncap the tick rate and I should be good to go.
But yeah, I would really love to go back to Linux.
And I might now that I can just copy the ASM configs/command line and see if I can get it to boot without resetting my configs
?port didn't need to be up front with ASE
Well someone on some page said there has to be some magical special order of the arguments or your config gets reset.
I couldn't figure it out so I used ASM 🙃
I considered using ASM through WINE, but I'm more familiar with Vm's
But I might try using WINE next.
Totally could've been an ASA page I clicked on accident
Either way my settings would constantly reset and I could never figure out why