#🌟│wooting80he
1 messages · Page 322 of 1
Yup i sent a mail , I need to wait for an answer , so i was just asking if maybe it was common for my country , i sent a mail the 11th
if its in preproduction would it delay my order?
shrug
so can go either way?
You can either cancel your order and place a new one to your liking (note the estimated delivery date mentioned on checkout), you can contact us to edit it. Or you can ship it as is and reach out to return part of the order at your expense.
kinda tired of waiting so if its likely to delay my order id rather just pay the return shipping..
I can't answer that question for you, only give you the options.
alright thank you
also quick question, my previous order had the white zinc alloy case included. If i were to place another order i won't be able order it right? i don't see an option to
Not yet, no
some games dont like it when you use kb&m with controller keys
Works last I checked, though GTA needs two profiles. One for being on foot, one for vehicles.
Its something like that
I'd recommend making a thread in #1019723042244534282 and see if someone can help you set it up. Or maybe do a search on the Discord for "GTA" and see if anyone's shared a working profile.
My shipment finally gonna send I see lol
Came within a week 
Hello guys, I often have a hard time removing switches and I feel like the plate is being bent a lot, is there a risk that it actually get bent for real or that I damage anything?
When I pull out the switches I'm really afraid when I see how the plate moves
how do i swap the mode and escape keys?
You open Wootility and move the keybinds around.
Hi guys! Which is the best usb port to connect my wooting 80HE for input lag? (Motherboard b550 tomahawk
The type c or the red one next to it
Red
Why not the type c?
@wild trench @torpid jasper should my mouse be connected to the chipset ports too or motherboard?
hey what about me
Motherboard
sorry bad quality but this is the motherboard i got which port is the best for the wooting80he?
(for latency and input lag obv)
ik its an old motherboard
I would personally pick motherboard up to u tho
all that matters on what usb port you use
is try to not overload one usb controller
so spread out your usb devices
Most motherboards aren’t always the same speed with colours need to know which motherboard it is
its the gigabyte b550 gaming X
Red and blue is ok
So basically connect the kb like any other wireless devices (in blue or red usbs) ?
If it’s 3.2
are u sure..? i also got the op1 ik if u know its one of the fastest mice so which one should i plug the wooting which port the op1?
Don’t really matter which one
Just the normal black usb is slow
Yeah got it
Don’t matter tbh
also blue and red near the ethernet port or the other blue on top?
Wooting red op blue
okay tysm dude
The blue on the right at the top is the same as the bottom one
which one...?
theres 3 blue usb a there..
The right one above the red and the bottom blue is the same
please do not worry about what usb port you plug it in
usb 2.0 supports wooting 80he
just dont overload your ports
and if you do happen to run into any issues, try a different port
dont worry too much about it beforehand
Any of those ports are the same and have no impact on input lag
I get anxiety from taking apart my 80HE bro
Why does it require two profiles ?
Because of how different you control your character in those two modes of travel.
anyone know why my light indicator has went static even though i had it sync with keyboard to do spiral effect?
Did you enable Tachyon mode?
Wait... light indicator? You mean the row of LEDs above the arrow keys?
yeah
what does it look like?
no idea i didn't touch anything it just went static blue like the primary colour on the spiral rgb light
screenshot your layers and post it here so I can see what's going on
Fixed it 😂 silly me did what u said ^^
Let's goo
Hello, I've got a wooting 80he and am looking for a way to assign a button to change the volume of the application you are currently tabbed on. Anyone done this before?
just use volume mixer / game bar to change the volume of your applications
Never seen anything like you explained
I was hoping to bind maybe like fn + up arrow to make the application's volume go up through volume mixer
so that you dont have to open task bar, right click, then move slider with mouse
You also can use the shortcut win + g for the game bar if you have it installed
There's no such media key for that in Windows as best I can tell. So it's just system volume.
Hello, I've had the 80HE for a while now, and love it so far. Except that the thing gives out shocks to touch every now and then
Anybody else having this occurance?
If you filter search "shock"
A few people have said something exactly the same or similar
I'd imagine it's not from the keyboard itself, perhaps you're building up static and the keyboard given its metal casing is causing a quick bzzt
the zinc cases should still ground through the screws of the daughterboard
if that doesnt help try plugging your pc into the wall directly without power strip in between if possible
is this some US thing
Any that have a reliable grid otherwise 😄
idk i just saw people suggest this and i assume if you have a really shitty cheap power strip you may run into issues
and well, people tend to not want to spend on power related things
^
which is a bad idea sometimes
Usually not smart
^
"Oh, it got THAT hot?"
"gee"
Nah, the only time I get that "shock" from my HE80 is around 1 in 20 times I touch it
900A
Now that's deadly
Just hope it won't end up killing the board
Don't think "sparks" are covered by the lightning warranty by Wooting 😄
I need some help my (A) button started spamming and stoped working I literally only had this keyboard for 30 mins
I’ve reset it and unplugged and put it in different spots
have you tried a different usb port
yes i hve
Should I go with usb type c then?
pls
dont worry about it
just worry about it if you run into issues
if you dont run into issues, dont worry about it
That's my philosophy tbh
By ordering a 200€ + keyboard, you are goddamn allowed and should be worried if it didn't work the way it was ment to
"Don't worry" is the basic response of a company when something is faulty..
what
What issues do people run into?
this was in response to someone being paranoid that they would plug it into a port that cant support the board (no such port exists on even semi modern motherboards)
nothing to do with not allowing people to worry about their keyboard being faulty
Yeah, I get it.. also you told me with the "shock" effect to try another USB
yeah
it could be an issue with the usb port
i dont know what your exact situation is and all the details about your pc, power grid, how it is plugged in, etc etc etc
i can try to isolate what i can and see if something works
but i am not a wooting employee and dont know all the details etc
if you think your keyboard is faulty message support
i try to help best i can but i can only do so much
Yeah.. I get that part as well. I work in troubleshooting and CS as well. I find it funny the USB is the source AND the problem

i havent seen much issue with the "shocks" and most people just worry if their usb port can handle the 80he (to which the response is usually: yes)
It ships with USB 2.0 dongle..?
the dongle is a simple electrical connection, i'm sure it is also usb3 compliant
but the 80he meets usb2.0 standards so any usb2.0 port that actually meets the standards should support it (of course not all usb2.0 ports are good and actually meet the specifications)
8khz is the maximum for usb2.0 as far as i am aware
.. And USB 2 has been around for about 20 years by now.
Of course it doesn't.
which is why troubleshooting step number 1 is always port, cable and rgb brightness
Fair points of checking for possible failure of a product
Point being; multiple 80HE, mine included, had problem turning on the first time.
Mine worked fine SO FAR, since
Well usb type a 2.0 was for 20years
Some type C are still 2.0
Beside the point
If the keyboard is supposed to work on USB 2.x
And it doesn't, until some tweaking
All of our keyboards work, feature complete, on USB 2.0 ports that meet spec
Except for example my one, which was on the first connection connected to an TB3, type C connector
Ofc, it's not USB 2 compliant
Tb3?
Thunderbolt
Thunderbolt is just usb c addon from intel
Where's Mark at, my keeb didn't come in 15 min or less. That means it's free right
Like those old pizza ads
Am I correct to understand that you plugged the keyboard in, it didn't work, you unplugged it and plugged it back in, and now it does work?
It is europe not america
Yes. same port, same cable which was included with the board. Then came bunch of updates from Wooting software and now it is working as a keyboard should be
Okay
As an American, we know the US is the only place in the world. Don't spit these foul falsehoods of other ethereal regions
Okay, I need sleep 😭
Also in mDP in Apple produce
Maybe try eating real food
Because they license it from intel
Wait, curry every day isn't real food. Uhoh
I'm not even American, I just live in the US rn

Most people just assume USB-C
I don't know that I would consider "unplug it and plug it back in" as tweaking, or that this behavior suggests that the keyboard was the source of the oddity, but if the keyboard is working as expected now then it seems like a non-issue
Americans use modified geneticly meat and weggies
"then it seems like a non-issue" - Now. Interesting take.
Because it is grown in europe
The healthy stuff? Probably
Is there an outstanding issue that needs resolving?
For now, no. I would assume this will build up to one, at a point. If the keyboards delivered fail to power on the first time
4 year warranty, you got this
I know. I don't like paying "premium" for a product that fails to turn on the first time you plug it in
Leaves a horrible taste in your mouth
It does suck to have to do some troubleshooting, no doubt. I'd give it a week or two and see what happens. Too many options I feel to really know what went wrong.
Now, that the KB is working, all is good
The first moment, when you plugged it in and NOTHING happened, is the point
For sure, sorry to hear that happened
I guess I don't really understand why replugging is considered burdensome, nor am I anywhere near as confident as you seem to be that the problem was the keyboard
Am not considering a burden to plug somethign in at all; I do it all the time
The point like mentioned, is nothing happened the first time
I suppose I'm coming at this with the perspective that actual catastrophic defects can and do occur in every single product that gets manufactured at scale
I suppose you are. And I get that
I, who paid 200€ for a keyboard expect to work
as it does
just, the first one left a very bitter taste
which it might to others as well
Perhaps I can sooth that feeling by reaffirming that should you experience any issues with your product for the full duration of your 4 year warranty period (2 years for LEDs) that we will certainly get that resolved. And to mention that we have an established history of supporting our products long past the stated warranty.
I know that, thank you
Wouldn't bought this otherwise
Just.. frustrating to plug the KB in and,....
nothing
But, since the KB has been working like it should be
Remember to use compliant USB2 ports
??
Just a reminder
Dw abt it rosie
I really wanted a white zinc, but just get a 2nd wooting
Or I'll dm to see if sell me part

What lekker springs so u guys use
Does "shipped to you" mean the keyboard has been actually dropped off
V2 60s, not too light to accidental press and I prefer the heavier springs to press down for throttle control
i think shipped to you in my case was as soon as the shipper label was printed, it was picked up when my tracking link started showing an estimate delivery date
My Wooting 80he keyboard suddenly stopped working even after a reboot (undetected in wootility too), but it fixed itself when I plugged it into a different usb port
What can be the reason for this? should i be worried?
might b a faulty port
Not all ports are equal in pc either. Some share the bus with other components inside the pc too so anything can affect it. Bot power and data levels.
Nope
maybe i should slap this on a 80he
id be tempted.
when i want to switch from us layout to german layout, cant i just get german keycaps and replace the keycaps which are different to the actual german layout?
instead of buying a new modulo or whatever its called
bro the switches selection came right after i ordered the wooting 😭
i mean
i couldnt select this when i ordered it
Sure you could.
Do keep in mind these are not installed for you. And if you don't select a module, you'll get L60 installed regardless.
for me i got the email with it saying shipped to you on 7th march but i got the estimate on 10th march since it was picked up then idk
It was picked up on the day you received tracking.
It was SCANNED by the courier on the later date.
When 80he case with oled screen
help my wooting 80he is tweaking when i use rapid profile i set acuation point to 0.1 mm is that why?
i know why
sometimes it presses like0.9 mm down automatically
im litearlly pressing nothing
also the led is so dark why???
please someone help me
default cable?
yes
u mind trying with different cable, ports or computers?
probably a power supply issue

thats not too hot
That's not even hot
oh
but the usb was hot af
and i was hosting on my pc while playing with a friend on that server
i think it just overloaded or smth
thats not even reaching intel’s normal temps
for the i9
what generation
Anyone know how to fix ghost typing when 8k polling is on
My wooting be randomly spamming the 5 key when I use it
Update firmware
I have it updated to the most recent but still have the same issue
Guys I just ordered a 80He w or l
Waiting for zinc white
so, as it turns out these are not uk iso compatable :(
it is
simple base is just ansi though
get normal base
geon does this alot to save people money,
at least the set i ordered from ozokeyboards did not include the ¬ key, 2 with the", 3 with the £ and a few others i cant remember
got a link to the listing?
you likely bought the wrong set
oh lmao
its a replica, not the actual british racing green
dafuq
90 bucks for a cheap replica?
bro the real one is cheaper
i payed less than that for them
🫡
then if it doesnt include iso then rip
kinda ironic lmao
british racing green
oh actually these stuff no one includes
they cost too much and very few people use them
depends on the designer tho
yea this one does
but a lot push it to child kits
geon did this too in the past
but i think cos of the theme he added it to the main kit
for the replica, he probably just used a standard kit
and just stole the colour choices and logos
We no likey the cheaty cheat
what you dont like your product to receive a lot of bad rep and to be banned from competitive games???
Dam this companies nowadays!
Hello, I'm writing this message to say how incredible the Wooting 80He is, the best keyboard I've ever had, truly perfect for gaming and above all satisfying and incredible to use on a daily basis.
Hey, I just got my wooting 80HE. Feels amazing! Should I use the usb-c plug in my pc or the normal isb cable adapter?
Doesn't matter. Use the one you prefer.
Hello I play valorant 80he play 8000hz is good?
What
It’s a keyboard lmao
You probably will be better off practicing and aiming better
8khz dont matter
yes its good for val
higher polling rate could hurt your frames if you have a lower end pc
Not really as bad for keyboards
Unless you have really bad hardware its prob fine
not on a keyboard
rly looking forward for the v2 white zinc
oh nevermind then😭
Why does some keys don't work like enter and escape
And backspace
only on typing profile it works
but my mouse 1000hz
thats also fine
polling rate is not a big deal past 1000
Is it safe to clean the poron pads under the stabs with 99% IPA? My prelubed TX AP 1.6 LP stabs are sticking and I think it's because the poron pads got lube on them
Nah, it disintegrated them, so I just removed them all. I like the feel and sound of all the keys without the pads except the space bar so I might get some different pads for the space ar
Do you know why it affects games like LoL and delta force?
Like my pc I feel isn’t god tier but it’s solid for 1440p but I run high polling rate on my mouse alone and I was “lagging” in league of legends and delta force. Both games they are not hard to run
Game engines not coded to handle it. In a nutshell.
Oooooh, ty 
Games unoptimized for it and your cpu isn't powerful enough to just tank it
Any recs for pads to put under the spacebar stabilizer?
What do you think I should upgrade to from a 9800x3d?
The two new ones they just released?
Yeah cause I can’t run high polling rate on my mouse and I haven’t tried on my 60HE, I got the 9800x3d and a 4080
Buddy... there ain't no upgrade. You need to stop expecting every game to do 8khz on a mouse.
Keyboards don't have that problem.
No I mean like 2k polling rate on my mouse LoL lags, I was just wondering if ppl found a hardware combo that fixes it
lol has issues with high polling
there is no hardware combo that fixes it
you have 9800x3d
is this a channel for troubleshooting?
ooooh ty
question, whenever I am typing my keyboard is making noises and my keyboard is very slow to react
anyway to fix that?
I just restarted my pc and it fixed it. Really weird bug, it's not the first time it happens and I like to play a lot of rythim games. It's weird that it does
Threadripper 😭 💀 🙏
240hz monitor and the 1k polling will lag behind.
9950x3d
Maybe just dont upgrade
9800x3d can work with even a 5090 dont waste ur money
Some games don't work well with high polling rate
1k is the recommend value
Any higher and you're going to have a hard time actually telling the difference. And depending on the game engine it can cause stuttering
Apex Legends as a example with start stuttering like hell once you go above 1k polling on your mouse
14900K
I'd wait for bartlett lake tho. True 12p core on a single ringbus.
why
Intel's foveros will take some time to get matured. Until then, monolithic it is.

Probably experiencing AMdip
was wondering if an upgrade would fix stuttering in LoL and delta games from increasing my mouse polling rate but its just the games
It’s on
When u hover ur mouse over it u can see the keys selected
its not off, you need to select keys or go in rapid trigger tab on the left
i did but it shows its off tachyon mode enabled other is disabled
Did you read my message
done that it wont work
literally wont stay on
clear video of it not working
clear screenshot that its enabled
...
no keys rapid trigger
Question, I have an 80HE but the backlight white doesn’t seem to be a real white compared to my other keyboard, do the standard key caps have a tint into them??
Some games have polling rate issues on amd but not on intel. I do not know about LOL tho. Ask around if Intel users have issues in that game.
You cant have real white on rgb. But play with colours so you will get nearest to white colours
Click one of the keys any of them
It dont show because u didn’t select any keys
Ye but shouldn’t it always show that it’s enabled ?
You need to select a group of keys first
I can understand the confusion
but rapid trigger is enabled im 99% sure
I did select all it just disabled it ☠️ the tachyon mode shows it’s enabled
Select the keys again
@rancid osprey
- Hold your mouse and move the arrow thing onto one of the keys
- Right click the key
- It will show rapid trigger is on
This just rage bait now
The picture posted here very clearly shows it's enabled
Because u turned it on…
Can u make a video of u selecting one of the keys and tell me if rapid trigger turns on
ye it does but when u come off it it turns off
stupid site then misleading
do u even have a wooting tbh u dont have the role
how would i show
Or did u buy from third party
if i didnt have it i bought from the site
nah sorry i dont have a wooting
Link ur discord account
nty
roles ugly
dont have a wooting but i showed a video of me on the site
@rancid osprey do u genuinely want help or r u just here to troll
I gave up
hes just rage baiting
so bored i guess
When was I trolling ?
I don’t feel the rapid trigger at all
When playing
U dont feel rapid trigger when ur actuation is 0.15
Put ur actuation at 3mm and u will feel it
yeaha thats just not true at all
lol
does the higher polling rate on the 80HE cause frame drops?
no
why wouldnt it if mice have that issue
because mouse sends a lot more data to your pc
if ur cpu is a potato then maybe
because it has to send way more info to the cpu constantly on whether its moving and how far u go
I get frame drops in Fortnite from 4khz and 8khz on my Finalmouse on a 5800X3D
technically it does but its like x3 less than mouse
not 3x, a lot less.
i lost like 20 fps on a 5600 going from 1k to 8k
when i went from 1k to 8k i lost between 60-100fps
hi guys ,somebody have a macro for superglide on apex with wooting?
You mean a wooting profile? Or configs? (You dont need configs for that)
There are macros that help make it easier. I assume that's what they're referring to.
damn
Yes,I know that you can put 2 Keys in one ,to be able to do superglide more consistent
imagine a future where we get laptop kbs with he
you have to make a specific DKS binding for your FPS. look up a guide.
With wooting 80he?
mouse
Okok. And with wooting?
like 20
actually thats the point where u feel it the most (for me personally) cus the actuation is at the top of the key rather than the bottom and i dont release my keys fully before pressing again
I copied it. Can you check if the Rapid Trigger is turned on?
Elow guys! Can I ask about 10HE here?
Hello Time Traveller. You appear to have landed a little too early. The 10HE does not exist yet.
two HE my bad 😆
#💬│general is where you want to go. 🙂
Thank you 🙂
Damn, what time am I in, I got an 80HE
HMMMMM, So that means It WILL exist
So 8k its good on wooting
its not even 20, not sure where did you get that number
you need to press so many times to see the difference and even then its very small
Ihaswooting
very cool kb 
i will soon
guys what does the ARM mean?
That your 80HE uses an ARM processor. Like every other 80HE ever.
thanks, I will rip it out once it arrives. Don't want the fbi to spy on me. also I feel something scratchy in my dermis
I think I should rip it out
Just waiting 😊
That’s the CIA nanobots controlling your mind. Don’t resist.
guys what keyboard cover do Wooting 80HE users usually use?
Cover?
Case?
I mean, I can give my keyboard a blanket and read it bedtime stories
yeah keyboard dust cover
I don't.
Some use the package plastic cover from the PCR version (preinstalled only), some custom order a cover from Ali and such (See pinned messages in this channel) and some don't use anything at all.
yeah Zinc Alloy model doesn’t include it..
Indeed. There's no reason to.
Yeah but you have a carrying case
when is my wooting v2 white zinc alloy will be available I am GETTING INSANE
Arguably much nicer and better, if you ain't lazy
ok!
I have a question
Why are the colour options on the 80 he so limited? Rn I’m looking at the 60he w a pink case but I’d rather take the 80 but sadly no pink
It's new
Production is already difficult atm for the white colorway
Pink may not even be planned, honestly, but regardless it's best to exercise patience
You can try aftermarket cases like the GT-80 by kbdfans
You can buy raw case and paint it pink
Hello i have a question, I'm looking into buying the Wooting 80 HE module kit, does it include the foam that you get from the plastic case? or do i have to buy the case for the foam? because I was thinking of building a GT 80. I would like to know if it also sounds better with or without the foam for that case if anyone is using it. Thank you. please do reply this this message so i can get notified
No case, no foam, no USB cable, no daughterboard.
You should get the module with the PCR case, if only because it's cheaper to do so than pay for a daughterboard with the GT80 (and a USB cable)
Is it actually?
Yes?
Ten bucks for a PCR case.
KBDfans charge 6 bucks for the daughterboard alone. Which means you've got 4 bucks left to find a good USB cable.
Having all the parts necessary to power on the board made by us also makes warranty a lot easier.
So does the PCR case include the foam and the daughter board + usb?
That's what I said
ok just making sure
now this frost case shows the cable and dongle lmao, i think it would be more suited for the board??
also, eu-zeebars-2 arrived or something, and i didnt get message in this server :( oh well i will order soon
Why is that? The cable IS included with the case.
If you buy the module but no case, no cable (or USB daughterboard) for you.
before, the text wasnt there
Yes - We've been working hard to improve clarification of products lately.
are you guys still trying to improve the LED Calibration it seems to be a issue wich cant be done with difrent value changes i checked on it -
as example green LEDs switch earlyer on than red ones with lower minimum brightness the reddich tint should be possible to reduce (not completly though)
im about to receive my 80he today, im so hyped
that is what i love about wooting, they actually give a crap about the user end, and some he keyboard software hosted on literal google drive and the link is expired or something
can't wait
What did u order
you must wait 😄
what does 'ready to pack' exactly
mean in here while estimated date is 21-31 march and changes each day ( order placed 14th of march )
Orders dont ship on weekends
So if you ordered late/midday on friday
Makes sense it hasnt shipped
understood , but this descr' ready to pack' means that all items of my order are on stock , and just need to pick it up from the shelf and send? sorry its my first time with such specific dispatch prcedure
Yes.
80HE
hi. i just received my 80HE, can someone help me few minutes about the software and some settings? thanks
we got a video just for you https://www.youtube.com/watch?v=his10sTphG4&t=9s&ab_channel=Wooting
This overview video covers all the core features of Wootility and shares some tips and tricks to help you get the most out of it.
🔍 For detailed tutorials on specific features, be sure to check out the playlist below:
https://www.youtube.com/playlist?list=PLUwyc5IrGTnx-hnPyJ-TOT6LRMw6XGcUr
📝 Patch notes https://wooting.io/wootility/changelogs...
basically i want to know what to enable and what to not for CS2
and maybe some attenuation settings or something
dont enable snappy tappy
the rest is fine, up to your personal preference
we got a video on cs2 profiles too on our youtube channel
and pinned in #🌈│wootabase_profiles
okay, thanks a lot! btw there is an role for discord?
yep, link your discord to the wooting hub, refresh and tada~
refresh? cookies/cache?
i did refresh, still not working

ayy there you go, thanks
Does everyone enable the Continuous Rapid Trigger?
Depends on the game.
what do you recommend for cs2?
CS2 does not require anything specific. It's a city building game, so it's pretty chill all things considered.

btw are the stabilizers still as rattly like in Squashy Boys video?
You just need to tune them
Like practically all stabs
Question guys, is the PCR black and PCR Transparant both made of the same material and strenght?
Like, does the transparant flex more then the black one for example?
Or are they the same 😄
in the cs2 settings guide on the youtube video, it shows like this
but now it shows like this. how should i do it like in the video? since i cant find any cs2 profile yet
Its preference
Do you want your release and press to have different actuation points for rt?
Or do you want them the same
idk how to answer this since idk how this works tho
im trying to copy the cs2 settings guide
Set them both to 0.15 and see how it feels
should i test it ingame or windows?
If you find thst you are accidentally letting go of your key and stopping moving when you want to
Raise it
In game
Go into aim botz and just try settings while counter strafing
See what works best for you
hmm okay
It doesnt really work if your actuation is lower than 0.5mm
try 0.15 press and 0.25 release
no continuous ?
☝️
I still have it on, cus why not
With continuous off, keypresses cannot occur below the actuation point.
thanks !
yeah it seems like 0.15 with 0.25 works good atm, imma test it later on some faceit. ty @lime falcon
what is your actuation point
I would recommend disabling rapid trigger on E and shift keys, so you dont lift them up accidentally while defusing or walking
?
yea, uncheck rapid trigger on the left for those 2 keys
Yea
Let's check out Mod Tap within Wootility! Mod tap is a powerful feature that can help you create more dedicated or dual functional keys based on key press behavior. Tap the key for one action, hold the key for the second action.
For example, on the Wooting 60HE, You can map dedicated arrow keys on the right bottom keys while still having access...
man, sorry for asking those many questions! you are a hero :p
all good
is Rappy Snappy also good for cs2 ?
You can get kicked
hey guys, did you guys have to pay duties on canadian orders after you paid for UPS express saver DDP? i thought the entire point of this was not having suprise duties xd
got Kicked for SOCD but did not for Rappy Snappy
yet
You're not supposed to no. But we've had a couple of shipments recently with this issue.
Could I have your order number? EUxxx
Order EU314627H
You'll have to reach out to our support for assistance with this.
You can either pay the duties (again), and reach out to get a refund on the duties you already paid.
Or you can refuse delivery and have the package shipped back to us, and we'll sort out a new shipment once it's back.
sounds good, i will definitely pay duties twice and then arrange for the refund on the duties paid. as i want the keyboard pretty badly.
Yeah it's ultimately a question of faster delivery, or not having money on the table temporarily.
It sucks to happen, and we'll investigate what went wrong to try and fix it going forward 
has anyone else had an issue with the lil velcro strap in the travel case that holds the cable :V
gotten very not sticky now ;-;
how do i disable sleep mode on the keyboard? like after some time it turns off the leds
In wootility - settings - keyboard settings
thanks !
Anyone knows if the Wooting 80HE PCR Ghost is more flexible as the Black variant? Or are they the same?
well i have the frost and black and they are about the same i think let me check
a
ye about the same
Ok!
It's still an interest check. Not much to know till it either succeeds or fails.
They only did interest check on their reddit
So I got my own wooting 80he on Thursday, and after testing it out. I've discovered that for some reason Snappy Tappy (SOCD) just isn't working for me. When I try to test it out in Valorant or Overwatch, it simply just doesn't work. And when I'm in the Wootility.com and I'm testing out the "Pressed Key" and "Released Key" for some reason when I press my D key it just doesn't get recorded. If anyone knows what's wrong please tell me! Thanks.
I received my 80he today and the only problem i seem to be having (I think its a problem) is the spacebar is much louder than the other keys. It almost sounds like it is bottoming out. I checked the stabs and everything appears normal on the surface
Lube and tune your stabs
any special way or just youtube it?
hey gang. was wondering if anyone had any input on how long after the shipping label was created in the US their package went out
I know this was like end of business Friday, so I'm not really upset that it hasn't been shipped yet. Just moreso wondering if anyone remembers what the timeframe roughly was for them
did you order from Vegas? or is it the product that is coming from Vegas?
US warehouse is in vegas, so that's the normal starting status
That's where the warehouse is
ah ok, sorry, lol. I am located in the Netherlands and started to be curious if my order was going to be coming from Las Vegas
yours should be coming from NL then (where all EU orders start)
icic, a bit sad they don't have an actual store in the Netherlands
Lots of overhead involved in a physical store. Idk of any physical store that just sells keyboards and parts
i got my 80he today
best keyboard ive ever had
any recommendations for a good profile?
How long was shipping
well i meant to buy the expedited shipping but somehow missed it when i put my order in, so i ordered it on the 11th and got it today
with regular economy shipping
@worthy sorrel
Ah
W
My 80HE was expedited with 2nd day air, so it should arrive... tomorrow?
It's hard to say, my tracking is bugged
its my first wooting
I ordered mine on march 12 with expedited shipping and received it today
that includes the weekend
Mine comes tomorrow I’m gassed
for anyone buying a case for the 80he, the daugterboard is being sold on aliexpress https://www.aliexpress.us/item/3256808381966437.html
You can buy the GT80 with a daughterboard though.
ah i was under the assumption it didnt include it, good for anyone buying the bone80 tho
Or just buy a case with our 80HE and avoid any prolonger warranty concerns, from us needing to send Wooting components to verify the board works or not with all wooting parts.
For ten bucks you get case, USB cable and daughterboard/JST cable. KBDfans charge 4 bucks for the daughterboard alone.
where u located?
also waiting for mine 
how many times in a row should this fail
mine took 2 month to com be patient its worth
No patience
I bought based on shipping estimate
But my beef is with ups, not wooting

east coast usa
You sir have restored my excitement
I think confidently, my keeb may arrive tomorrow
Bought on 13th, am in east coast USA, got expedited. Yeyeye. I have faith
I see
I shall wait at the window barking at the cars that drive past
I'm from asia so I reckon it will take longer 😭
Anxious for my wooting
I've heard some European countries getting in less than week
its rly good
i just got the defualt 80he with no custom case or cable
i think thats all i need tbh
bro my W + S key is unresponsive so I rly need this wooting 😭
Up to preference
It ships in the carrying case, my friend

It'll feel that much more premium, cause you get to unzip the case to unbox your 80HE
Hell yeah
Ngl Vegas is only a few hours away
I could just go pick up my board if they're chill like that
They're showing 'pre order' on their site for the plastic. Guess they went out of stock?
on canada site, they showing every ISO model as preorder
How much actuation does the tcc kom rgb need
Thanks
Assuming you're talking about the Wooting x TTC ones
Yep
i just opened my windows and the keyboard was not working until i replugged the usb-A in. why is that?
I’ve been dreaming of a wooting since they released the 60HE. Finally got the 80HE. Perfect compromise for size imo TvT.
are you guys still trying to improve the LED Calibration it seems to be a issue wich cant be done with difrent value changes i checked on it -
as example green LEDs switch earlyer on than red ones with lower minimum brightness the reddich tint should be possible to reduce (not completly though)
Calder although mentioned that recalibrations would be done but so faar nothing from wootingside to "improve" THIS not like its totaly removable but reddish tint is realy strong in that one
at least with that keycap set it doesent look missplaced
here I am wondering when Im gonna go order the gt80
any1 with a gt80 here, do I need to order the daughterboard or nah i forgor
If you already have a case from wooting you do not need the daughterboard
alright
thanks
so niceee
i cant wait for mine
???
How should i clean my keycaps
Can a dishwasher clean your entire mechanical keyboard? Some of you might of asked themselves this. Well, so did I. So I tested it out! But don't do this yourself, as cleaning your keyboard in the dishwasher VOIDS the WARRANTY and could easily break your keyboard.
⌨️ Wooting Two HE https://wooting.io/wooting-two-he
✨ Follow our socials! ✨
Disc...
take all the keycaps out and dip them in soap or smth
I'm not sure about the issue you replied with but I set my LED bar to be as orange as I could to try and match my orange accented keycaps (they have a orange touch rgb effect too). In my rapid trigger profile though I can indeed turn down the "redness" just by lowering the R value in the rgb editor.
its reddish even if you try pure white 🙂 your keycaps literly are super awsome for the reddish tint 😛
This is my white colour bar though 👀 @wispy trellis
and credit to Pukahahaha for the keycaps. Found the inspo in the wootstations chat
how do i get the i has wooting thingy?
you need to link your discord email to your wooting account
a
Heya, does anybody know where I can get other kinds of cases for the 80he?
nvm i dont have wooting acouunt
With Gateron HE pcb, it's possible
i only know of 1 3rd party compatible wooting 80he case otherwise its on the wooting website
Ahh guessing its a little too new at the moment for there to be a few 3rd party options
yep. I heard that the wooting team will release the dimensions and whatnot for 3rd parties. idk if it has happened yet tho
Noted, just have a friend who wants an 80HE instead of a 60HE but in metal, zinc case is nice but its completely raw
raw? as in the raw case? but yeah. Would love to see more metal case designs.
Pretty sure those files are already released, only known 3rd party cases are gt80 from kbdfans and then the bone80 to my knowledge
Hope more 3rd party cases have the daughterboard in the middle like the gt80, it’s nice
how hard would it be to design a case where the usb c point is customisable 👉 👈 👀
I want to be able to choose how I seat my cable depending on my setup
Guess you’d have to have a daughterboard that would be long enough to support that first 
the long daughter board. the longhter board
Hey how Long did you wait until the Keyboard arrived for people in germany? Just asking since I don’t See and Tracking way 
oh you get a message when it starts shipping?
btw do any keycaps fit on the 80he board?
thinking about customizing it a little
You receive an email with tracking.
oh allright hope it will get send soon :D thanks!
is there an estamation when everything will be in stock again since it says partially in stock. do they have a spot on the site to see that?
Go through checkout.
There's a big box showing you an estimate to your doorstep, once you've selected components and a courier option.
The hub will provide you with an estimate in that case.
Access and edit your orders, connect your discord, and manage your Wooting account.
oh yeah bit hidden but i found it thanks!
Ehhh... disagree to agree. We mention where to find this information with basically every email you've received 😄
i only received one and there is nothing of sorts in it
Are you absolutely sure about that, friend? 😄
you could make it with a 72px font, send them 15 emails, 12 SMS, 24 notifications and 15 agents knocking on their door and somehow they´ll still say its hidden
I mean... you're not wrong. And that is the unfortunate lot in life for customer service. Explaining things to customers who will often provide YOU with a screenshot or link that already has that information 😄
Sure. The hub does several things. I'd argue that clicking ORDERS on the left tab is pretty straightforward? 🙂
Really clicking through stuff? Literally 1 clikc lmao
Sure. You have to click the order in question. It'll make more sense when you have 3-4 orders I suppose 😄
yeah I used to work in costumer service for a big forniture sweedish retailer and yep, this is the life of the poor agents... there is not enough money for the amount of crap they deal with daily.
It takes a certain kind of person. I don't mind it.,
i mean you made a pretty big thing about a small ask and i was normal and respectfull so if that is ,,crap'' you have to deal with i envy your problems
you sir are not alone in a void... if you have difficulties clicking or reading, that seems to be a you problem... I recommend you read through and with a good understanding to prevent future issues 😄
i have no difficulty doing it i just said its a little bit hidden not forgotten under a rock
. So i dont see why to make such a big fuss about it. If things like that annoy you maybe this line of work is not for you.
Good thing I dont work here then 
one more reason i dont understand why to make a fuss and be invested about it 

Just making sure we're on the same page, and there isn't some glaring omission of information on our end, which we can improve upon 😄
yeah that is fine and i understand and maybe i was just a bit too fast with asking i just dont think his passive aggresive act was neccesary
or maybe it was a language barrier idk im not perfect in english
@delicate niche You could feel for a while like I feel on most polish forums 🤣
dont go to polish forums i see
every time i open my pc / restart my pc, the keyboard is not working and i need to replug the cable, why is that?????
Windows 10? 11?
11
Hmm... So unlikely to be the issue I was thinking of. I recommend making a thread over in #1019755933959733258 to begin with.
just wondering are there any other aftermarket cases other than the gt-80 rn?
average waiter experience:
I just searched holy 60 bcs of this and I went “holy”
chat should I get a black or white gt80 case with these caps
NO
Silver best
Most versatile
get silver
!!!
Bunch of people here have silver its good!!!
but highk idw it to mismatch the wrist wrest colour
if u want to clack maxx u need a holy case
been having a weird issue the past few days where my caps lock remains stuck on despite the actual caps lock light going away and I have to toggle it using shift + CL?
Hello question 80he use Rappy snappy or Socd for play valorant
Supposedly doesn't help.
Help with stop?
Nice
Did anyone tried low profile keycaps on 80HE?
The switch won't be shorter, so you'd just end up with floating toadstool keycaps.
That's why the Roccat Vulcan looks how it looks lmao
apart from looks it has any better experience than standard while typing?
like always when you buy one thing you open a rabit hole.. from the 80he im now going to build a completly new pc -.- i hate/love it!!!
i spend a whole day searching the best case and what i put it.. only to land on 3 products tausend of ppl bevore me landet although.. even found a guy making a comparisioon betwean those 3 cases
i bet a lot of ppl hafe the same stuff too in mind..
Gigabyte B850 AORUS ELITE WIFI7 AM5, AMD B850, ATX
Fractal North
vs
B850M AORUS PRO WIFI7 and Lian Li A3-mATX or Jonsbo Z20
be quiet! Dark Rock Pro 5
Kingston FURY Beast 2 x 32GB, 6000 MHz, DDR5-RAM, DIMM
AMD Ryzen 9 9950X3D
well at least the 80he is in good company soon^^
any suggestions for the case? ; )
i somehow love the Jonsbo Z20 but i feer with my expensiv card taste its too hot^^
I guess not?
I like the case in the middle alot
But my pc stands underneath the table anyways
mine too 😉 its still nice to look at
Ye. But if you have those trendy wooden planks on your wall the third case would fit perfectly in it 😄
How fast is the 80he cable for data transfer?
It's a USB 2.0 cable
Nvm then lol
Are all the white Wooting issues resolved?
what switches should i use to give it more of a creamy sound
what issues?
huh
Why not
Brighter colors when rgb is turned on
design pops more
best version imo
wdym "too early"?
If you order now you get the current batch
Arrives in April or early may
The case was already released last year but due to some issues they resolved them in a few months and now it's available again
my 80he will arrive between 7th-23rd of april
It's completely fine don't worry
Do you have more questions?
yes
Zinc alloy worth it? I get a travel case included
hell ye
im struggling to use this switch puller, the wooting puller is hard to use as well😭
help , i think im too worried abt breaking something
That's a switch puller
Not for keycaps which is probably why you're having trouble
Something like this is easier for keycaps
My bad i meant switch puller ( i edited it)
What I am trying to is get the switches off
Im trying my best to apply pressure n squeeze the clips but sheesh
yea that thing stinks
wuque and tx switch pullers are very good
I pressed some random butyton on my keyboard fat finger style, and turned off one of my monitors
and now windows doesn't recognize it anymore
WTF did I press, and how do I fix it....
End..
Hey, is it normal that the f keys are a little bit lower than the number keys?
ahh thx they have the same when im looking from the side..when im looking from the front it looks like the f keys are lower : )
thx for the pic
looks the same for me
https://discord.com/channels/167181566978555904/1019755933959733258
Discord is not a customer support platform - For that you'll have to use the website. However we do offer a community based support forum here for customers to help each other.
Pick the category and issue you need help with, and we'll guide you through the process.
#🔧│keyboard_modding maybe you got some luck here :)
you mean teh white zinc? we're improving the coating on it, but should be back soon tm
yes
My keyboard is in pre-production, let’s gooooooo
One message removed from a suspended account.
One message removed from a suspended account.
Can we see pinned messages on the mobile app? I swear discord mobile did one update and made the mobile app 10x worse for no reason
yeah discord mobile is not great
Could anybody link me to a good set of key caps for my 80he iso uk based
Ooooh ty
#🪛│modding_faq might find something here, theres an overview of links
hey guys just ordered the wooting 80he, it says its on pre order but expected to come in factory today, where could i check this?
your wooting hub :)
I dont have one but I like the translucent cases 
i prefer the alluminium ones tbf but didint wanna pay extra 90 for it
Zinc*
Worth it
the pcr case is more than alright imo
why?
the quality is just worth the extra 90
The zinc cases is so heavy, it’s pretty nice
the transluscent ghost/frost ones look noice
Black is just better fr

Red …
pink
grey
fine... switched to 80he zinc
apparently na-dolphin-1 is shipping today
does anyone know when they usually ship in est?
The cable being so bent is kinda worrysome, will it break if I dont fix it somehow?
Why it is 90° bent
It is long enough so you have wiggle room
also the cable is new and stiff so you cant really bend the isolated part
is there any photo I can go by?
cuz in the module video its clear that the case sander used, the cable has already been bent so its not so stiff
Maybe try to re Seat it?
This what mine looks like, urs seems a bit more bent











