#🌟│wooting80he
1 messages · Page 374 of 1
Will this be able to flash and overwrite any firmware updates?
disclaimer that you will lose all your profiles and you CANNOT export on new versions and import on old ones
I believe the exception to this is that you cannot go from major version 5x back to 4x or earlier
a restore wipes everything other than the bootloader itself.
I'm a bit unsure on the nuances and deeper workings of bootloaders/bios , is the bootloader itself updated when the updates flashed keyboard firmware or does the bootloader remain entirely static data and permanently unchanged when the wootility flashed keyboard firmware updates?
the bootloader is flashed to the keyboard at the factory and is not possible to update out of that context.
So it's completely unaffected and literally speaking using older wootility software version to apply the recovery reset flash in it will flash the firmware properly to be the same as if had previously been before my issues began?
unless there is some other thing involved like PC-side software or drivers or something, yes it is literally the same.
the flash in the MCU of the keyboard ends up in the same state after a restore.
Does running the software in safe mode or using trustedinstaller or system security contexts have any benefit? Or otherwise is iit preferable to have these changes done without admin permissions? I'm just trying to make confident that I'm doing nothing what may indirectly cause problematic behavior.. i don't think I've ever used normal user account security permission contexts for the wootility software or web version since i have my local account using full admin control contexts on everything 24/7
You can go back to 4x, its just that 4x never supported 80HE so oldest you can go on 80HE is 5x
this shouldnt matter at all
going back to 3x and lower isnt supported iirc
Figured as much just wanted to confirm. Thanks for answering my annoying questions
Oh that's what it was, not 5 to 4 but 4 to 3
10 more stops 
My estimated date has changed again 😭 2 weeks on ready to pack now
i ordered my keyboard with uk layout and uk keycaps but asked support if i could change to us keycaps/layout and paid an invoice but i think i got the uk layout with no keycaps :/ ive contacted support just to figure out what went wrong and if i need to pay extra
No keycaps at all? O.o
Kinda weird, ig u just have to contact support, it was probably an internal issue
maybe, i replied to the support email i made when i first contacted them and hopefully it wasnt closed and they get back to me
They will for sure! Just keep the box etc in case you need to return it
Alright pls help me
I can't use any of the letter keys only the number work
It was fine yesterday now it's doing this stuff
returning is gonna be a hassle
atp id rather just buy some of the keycaps, i did some checking on the letter invoice and its iso and the order was iso and i mustve over payed by 35 in the end so it might just be worth to call it a day and get new keycaps
You'll be still stuck with the ISO layout then..
Peak??
at this point its whatever to me
Building this keyboard made me realise what true hell was. Unscrewing the screws, the jst cable, the anxiety of cracking open the case, FORGETTING TO PUT THE FOAM BACK IN but it should be worth it once I finish
I've done some research and I think it's possible to change the layout yourself when resetting your wooting, then just ask them for the keycaps you already paid for or buy ones yourself
The purpose of this article is to help you with the factory reset, restore and recover process to solve any issues with settings, actuation or connection issues
how is it ? i ordered it 3 days ago 
no no the uk layout, the ISO and the ANSI are completely different
@heady oxide im just gonna see if they can send me the keycaps from the order that got cancelled
Yes mb I guess there is no workaround here 
I thought they were maybe like 2 switches under the ANSI layout left shift
i just did some research myself
i paid 201.95 total?
190.95 for the ISO keyboard and keycaps
199.95 for the ANSI
i figured the 10 invoice i paid was for the swap but
basically they sent it after removing the iso keycaps but without swapping xd
Yeah I paid £10 to get rid of keycaps basically
Instead of like… paying £10 less for removing the keycaps

Need new keycaps ngl
My keycaps like
i don’t know bleed or smth??
maybe I’ll order the wooting ones
but I can’t wait for that anymore
Rgb? Are the switches orientated correctly?
yeah north
my dream build is gonna be the geon raw he switches, holy 80, sick gmmk polychroma keycaps and maybe a lube kit for the stabilisers
There's so much better than raws
My wooting 80he i replaced the keycap and i noticed my x key can only be pressed when actuation set to 1.37+ because its stuck showing its holding down with 1.36 and 1.35 it switches between each other i thought it was my switch but i replaced it with 5 different ones from the extras that came with my wooting 80he and it still showed it i even tried cleaning off the inside lightly and it dropped it from showing 1.45 and 1.46 to 1.36 and 1.35
tachyon mode does fix it btw
Did you replug after swapping the switch?
OMG TYSM IT FIXED IT
Gonna add these onto my 80he tenz takeover, mostly because the keycaps i have on it rn are kinda cheap and from amazon
Plus i love the color scheme of them
what are those called that looks sick
Its these keycaps i found on novel keys
is it possible to make it so that whenever im talking in discord my lightbar lights up
yes in the effect* creator
thanks
Just got the sad news that my package was delayed until June 5 :/
it’s personal preference don’t you think?
Kind of
There are "more objective" measurements like smoothness, stability, chatter and for those raw is a bit outdated for today‘s standards
well such as what
what switches are good and cheap (around the price of gateron jades)
But sound wise it is definitely very unique and some people may prefer it over other stuff
the reason i like geon raws is cuz they sound nice and are cheap
Ws flux deep clacky are fairly cheap on aliexpress
There are many switches that are as cheap as Raws and sound good https://link.wooting.io/soundtests
Those keycaps arent really my thing but if you like it, then that‘s good
I do really like the looks of the frost case tho
I like them but I’m gonna get some nice transparent keycaps from glorious
Translucent plastic electronics need to come back in a big way
glass 80he case where
Glass top copper bottom
Or brass bottom for the budget user
yeah glass 80he until it breaks cuz you slammed your desk so hard
this but for a 80he and my money is yours
I‘m not really the biggest fan of those "rgb first" keycaps personally
Tho i do really like kbdfans xray
I like it
I think it fits the frost case
is this like the bottom of a case with the PCB showing?
For me the cool thing about the frost case is being able to look inside and see the electronics + structure of the whole thing
yeah
The rgb is nice to have but not really the thing that makes it stand out for me
Now I that I have a wooting I will try to claim the “ihavewooting” role again
found this one from the same case aswell
damn that’s cool
Looks cool, could work nicely with Diamonds
sadly they only have 65%'s
is there anything specific i should search for when looking for keycaps to fit my 80he iso?
It finally arrived 
i have a question for wooting 80he users. im planning to buy a wooting 80he but i dont know which version do i pick, the plastic one or the zinc alloy one. which ones do yall think is better?
If you move your keyboard alot plastic if you just keep your keyboard in one spot zinc alloy
Both will feel better if you come from a regular gaming keyboard
i mean it stays usually in the same place,\ i move it when i wanna do something else, is it that much heavier?
It is cause its zinc alloy
Normally keyboard use aluminum so zinc alloy is more dense feeling
Also zinc alloy i think only comes in white they said a black one is coming but who knows when
If you want black then black plastic case
i think black is just out of stock rn
oh damn
i have one on my lap rn
???? no it comes in black aswell
nvm
actually iy does
it*
but you cant order the black separately
only shows white for me
idk maybe cuz you are in amerima
yeah im in america
its cause its out of stock ^^
ahhhhh
istg i just saw a message saying blacks out of stock
well whatever
i seen those
the slice75he has those
idk what that is but sure
its a prebuilt magnetic board by chillkey i think its like 180 dollars for me i did consider that board but its only like 20 dollars cheaper than wooting
i mean it sounds a lot better but its just a chinese keyboard with mid software at the end of the day
it also didnt feel very customizable
I just got my 80he and am setting it up, what do you all recommend for valorant?
Any issue when pressing A D keys fps dropping in valorant
is there another way to contact support other than the website? i cant really fit my entire situation in the 500 character limit
You get an auto-reply email, just answer that with what more you need to explain
Hopefully get my keyboard soon, im about 2 weeks from getting it, (2 tuesdays ago) is this the average time for getting one?
https://discord.com/channels/167181566978555904/1487516999805567097 look through here and see what people say
idk i just got mine today and i have been using it on 0.30 so far and i find it to be the most consistent in my opinion
sadest day ever, the keyboard devliery got delated, idrc i just get more time to study up for the good setting

i had been wondering why it was stuck in the warehouse for like a week
i play 0.1
How long is a string?
why do people keep asking this fucking question what do they expect the answer to be 😭
whyh wouldnt u
Hi guys, I have just bought my new wooting 80he in ten z takeovee edition, and wanted to change some of my switches to gaterons to try them out but when gently pulling them out with attached tool and also special switch puller the plastic of around 20 of my switches snnabed of what I observed just after. I don't know what to do, that keyboard switches were special and I can't really obtain them anywehere. Is there any chance wooting lets me to buy the damaged switches or send them. It was my first wooting keyboard and don't know what to do know or how to repair or get a support. 😔
Going from tikkens to gateron 
You already created a thread in #1019755933959733258 and the bot answered you how to contact support... go to https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
I feel bad for the bot, 90% of user ignore him 
what bot...
cause its a fucking actuation distance lmao theres only 2 possibilities for answers
either 0.1mm (the lowest possible is technically optimal), or the lowest you can go without accidentally actuating the switches unintentionally (which nobody else can tell you because it is person and switch dependant)
either way why ask, what different answer could you possibly expect? is someone gonna hit a magic middle ground that enables new special functionality or something
most people usually just want a number given to them and they stick with it
like the default in cs2 profile they give you is like 0.4 or something and i think thats fine
its also peoples like first time using these boards
worked up over nothing
people ask questions cause they dont know things, no need to get upset over people trying to understand stuff
yk.. its in the channel about too...
i think you are very much confused about my emotions toward this matter
i'm not angry, i think it's silly how stupid it is
This kind of rude and antagonist behavior is not permitted here.
If someone asks a question that you find to be silly or stupid, just keep your mouth shut. You have no obligation to answer anyone's question.
Wooting welcomes people of all levels of technical knowledge, and helping people learn about keyboards is foundational to our community.
If you choose to stand in the way of that with narcissistic toxicity, moderation actions will be taken.
damn, i'm not even allowed to say I think a question is silly hours after it has been asked and answered? that's basically the same thing as flaming the original asker?
(there isn't even an original asker because this is a class of question that gets routinely asked by 500+ different people daily)
honestly it might justify a pin or something to point people towards because it would probably be more helpful than cribbing a profile off someone and not knowing why it works
You were sarcastic, used crude language, and utterly unhelpful to the discorse. If you can't see why that was wrong, then you probably need to spend some considerable time thinking about how you engage with people online
i was using crude language because i wasn't speaking to anyone who actually needed help, it was a meta discussion about the type of question
note the person i am replying to is not the person who originally asked
This is a warning, not a discussion
i think some of these people woke up on the wrong side of the bed this morning 😭 😭 😭 😭
yea but mark with his transcendent and unparalleled aura silenced him tho 🙏 😭
W gd player
thx
i'm not entitled to an explanation and i don't want to get banned so i'm not pushing the matter further
good
I would go for a setting that best fits you without you accidentally activating the switch
please dont make it a community policy to instigate fights, im trying really hard not to escalate
i had a mod come into chat and unload on me with the kind of anger reserved normally for people blatantly trolling, i would like to leave it be without extra comments lol

mr akbar is right treat others like how you would want to be treated
like 0.3?
0.3-0.5 is normally a good range for quick actuations that don't have bouncing issues
whatever suits your playing style
its like wearing shoes for example only you can decide
what suits you
start low and if you feel like you're misinputting raise the value
go like .1 at a time
i personally like to make the rapid trigger sens the same as my regular actuation distance as well
hello, how do i open up the keyboard body, theres 7 screws i can see on the back but i still cant open it. i spilled monster energy on it and need to dry it out
nvm it pooped open and dropped onto the floor
Sometimes, you may need to fully disassemble your keyboard, whether it's to swap out stabilizers or replace components due to a defect. In this video, we'll guide you through the process.
🛒 Wooting 80HE https://wooting.io/wooting-80he
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
In...
You need to clean it with isopropyl alcohol, not just dry it
Good thing you didn't spill RedBull, then it would have flown away instead of dropping to the ground
ye i got some alcohol wipes we gucci
red bull wasnt on sale so i aint buy any
Does anyone have a video I can watch on how to lube the stabilisers I need to lube just one side of the space bar so ideally not looking to take the keyboard apart
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
This is for the old 60HE, but the lubing aspects are universal.
I did see this on the website but was hoping to avoid needing to take the keyboard apart just to lube one side of the spacebar
The 80HE uses screw in stabs. Unless you're going to cheat and use the syringe injection method, you gotta take the board apart to get to the stabs.
What is the syringe injection method and does it work for the 80HE?
I can take the board apart if I need the rattle is very annoying I am just concerned I am going to damage something
Yes, you can do it on the 80HE too
Just be careful.
Too much and if it gets to the bottom it can get sticky as it bottoms out
and that you won't be able to clear without taking it apart to clean them.
Little goes a long way.
I guess it is best to use a bit and add a bit more? how much should I start with rougly? i am a bit scared to use to much
Very little. I mean imagine how much lotion you need between your fingers to feel them being slippery/lubricated
As you said. Very little and keep moving it to test
With stabs the more thick grease is intended to have bit more viscousity as it's intended to stop the rattling of metal and plastic
so visibly there's bit more but you won't really know without taking it in steps.
Will bear that in mind, I wish there was some kind of good indicator you could send for where I should start but I will just need to go very slowly
a lot of youtube videos if you want references
but there's no measurement that I could give.
You just need to generally get a feeling and understanding of how it functions
ye will check some of them out will take a bit of time before the lube kit arrives so gives me time to brush up
Any syringe people recommend for this btw? i assume wooting do not sell one directly
I reached endgame
Just get type plus stabilizers off Amazon u just need krytox 205 and a light coat
I already have stabilzers on the keyboard that is built just need to lube them i have lube coming but do not have the syringe atm
Do the holee mod and a syringe and you’ll be fine
hole mod?
Search it up
I am not looking to mod the stabs I am just lubing one side of the spacebar due to it having a bit of a rattle, not had the keyboard long enough to make me want to poke around with mods yet
Poking is the best part 💔💔
Also why one side you should do both
One side has a rattle the other came with good amount already but I might do both depending on how I feel
Ur stabilizer bar is bent
U gotta take it apart and retwist it
I am hoping this is not the case that would be quite annoying since the keyboard is brand new, I hope the issue will be fixed easily once my lube arrives
Literally every stabilizer comes bent in some way
Even mine I had to retwist a little
Lube will like almost 100% fix it
Best I've heard an HE board sound so far, good job. What did you do with it?
3 games of blackjack and 800$ later
did you put new foam in or something? kind of sounds like PE foam but I've heard that messes with switch accuracy since it sits between the switch and PCB
Okay so what part of it sounds good
The stabilizers or just the sound of the switches
both, but I already know what to do to stabilizers to get that sound and stabilizers are the same on mech and HE boards
Okay well I used a pet sheet on the base of the board PE sheet above it and lubed diamond cullinan switches
Go really light on the lubing
ah makes sense
And I used pe foam
If you buy good stabs the wire doesn't come bent
Holee mod is not recommended also if you're buying basically any modern stab that doesn't suck
That includes the stock stabs
ive recently bought durock v3s and type plus stabs they both had a slight degree of bend
Wouldn't put durock in the good stab category they do need adjustment
Durock used to be a default recommendation but it wouldn't surprise me at all to learn things have changed in the past few years with the dramatically increased interest
i have an affinity for them
Theyre great if you tune them but the fact you need to tune them puts them outside of better stabs now that don't require manual tuning aside from lube
My wootility doesnt seem to be working, it keeps disconnecting and reconnecting
I cant make any setting changes
specifically when I try to enable gamepad mode on my racing profile
gamepad mode will disconnect the keyboard virtually to work, so you are fine 
But when I refresh it back in it says gamepad mode is not enabled
Typeplus stabilizer master race
i assume then it disables gamepad to enable the keyboard
yo i finally got my wooting 80 he, do i need to lube the switches? they already feel worse after like 2 days
With most of the switch options you shouldn't have to
w wooting
Has anyone else's 80HE died after they updated to the most recent update
tried this?
Use third party switches
Gateron jades and owl labs ti are pretty good options
gateron jades are outdated and usually not recommended anymore 
I still like them
best would be linking #🪛│modding_faq message because this is the latest recommended list
Gateron jade ultras
Anyone got a good preset for Rocket Leauge???
Maybe try #1019723042244534282 next time? Or look in #🌈│wootabase_profiles
can anyone recommend what module to buy?
Whaddya mean? There's just the module. Do you mean what layout? The one you have already
there were different switch, keycaps options, in the image you can see what i chosen, i don't know if they are the best options for less noise and for the RGB to be visible
I don't think any of the options sold by wooting are going to give you less noise
if low noise is something you prioritize, buy a module without the switches at all, and look to the switch database in #🪛│modding_faq for switches known to be quiet
as for the keycaps, those are fine for RGB to shine through
Maybe grab tikken switches instead
Okay, well i already bought it should have asked before lol, but i'll check these switches and buy them too, thank you!
hm k, my wasd and space sound a bit clackier. so do I just relube it once in a while or swap it aroudn?
you can if you want to, but i'm hesitant to blame lube given it has been 2 days
Space usually sound different than other keys, because it is a big key. For WASD you could try replacing the switches with spare ones and see if it still sounds different, and maybe let a other person give it a listen as well just to be sure it's not a delusion
also if you replaced the spacebar keycap it will sound clackier unless you move the spacebar filler over or use something similar on the new keycap
that empty space inside the keycap contributes a LOT
Is the multiple inputs on sone keys issue a known issue for 80he?
Shouldn’t be an issue, you should make a community thread about it and give more details
If it’s spacebar in particular that’s usually fixed by turning on the debounce setting but regular keys shouldn’t be getting any multiple input issues normally
Good morning everyone, I'm writing to ask for some information. I placed my order for 80 he, and I received an email confirming the card I paid with. Now the order is pending. Could someone explain this to me? Thanks.
Hey all! I keep getting this error updating the 80HE, it is followed by "device found" and then that thing again and again! Please help!
I would make a thread over in #1019755933959733258
no, any way to fix it?
by using the fix for the 80he
and not the fix for the 2he
look at the picture u sent again
im not sure if u selected it or its automatix
if automatic, contact
Are you trying to contact Wooting's customer service? Please use the support wizard!
https://wooting.io/support
Good bot
oh oke. ill see
go my busted camera (please ignore the mess i dwanna clean)
what keycaps are these?
lusterfly jellies from epomaker
ty, looks great
How often does the 80he black zinc alloy frame come in stock?
Anyone got the keytok nova switches?
Yes, i have previously owned them for a few months :)
I just got them and not sure if I got defective ones tbh
They're wobbling a lot in the keyboard
Video?
They are very stable, so something must be wrong
Idk if you can see that but the switch itself seems to move
They are not seating in the plate properly somehow
Try pushing it in further?
You should hear a click with the clips engaging under the plate
Yeah I hear a click, think it might be the switches themselves tbh cause I can feel movement inside the switches when I move them when not in the keyboard
That can happen but it matters how much
A lot since I got them because of better wobble supposedly 😔
My 80he is about to arrive, should I do anything to prepare for debugging/other things?
sorry to bother but, is there a wooting60heV2 channel ? i dont see it
Yes.
oh thanks !
I find the switches installed in wooting keyboards like the ones they make fit very tightly
Using third party ones arent as tight
I should've bought 10 first 💀 returning 90 of these is gonna be a pain
Have you tried both the lekker tikkens and KOM POM
I might just buy one or the other
Ive never tried them
did u get the signed one?
yeah i did
The plate has a bit loose tolerance seems like, does this happen on other keys too or just right arrow?
If you get different third party switches, there's a high chance they will behave the same, if it's the plate tolerance issue. Also both of those switches will be a downgrade in sound (KOM POM) and stability (Tikken) coming from Novas
I suggest not wasting money on another set of switches when you already have Novas
damnnn nice
it's rlly nice i just swapped the feet for the 6 degree ones
I put like 10 of them in and it all acted like that
I gotta wait till June 24th till my wooting 80he comes 😭
Also I'm ngl but I like the lekker v2 switch sound better 💀it also seems to be slightly louder when the reviews say it's supposed to be a relatively quiet switch
Nova is quieter than most other closed bottom switches. Lekker v2s have open bottom so makes sense that it's quieter.
Have any of yall used the lekker tikken medium for the 80he if so how is it compared to the other switches.
Very uh... Tikkenish? I used to use L80 Lekker switches, now L80 Tikken
(Meaning I swapped the springs and relubed slightly)
whats that even supposed to mean "tikkenish"?
Wait so the bottom matters, I need some lekker v3s with less stem wobble then 😔 I just want a functional quiet switch that also doesn't have much stem wobble for gaming
There are silent switches with almost no stem wobble #🪛│modding_faq message
But because of the dampening, they negatively affect the accuracy of the keyboard so keep that in mind
Yeah I would've went straight for them if not for that note
Mainly want a quiet switch for osu since the keyboard being too loud gets in the way of paying attention to the beat
I also play rhythm games, but no matter how hard I tap, I never hear my keyboard over the game, even though my build is quite clacky. Might be time for you to invest in a good headset 
Your best bet is to get a closed back headphone/headset or an IEM
But some people like hearing their keytaps in rhythm game since it gives them info on how good they play.
Love them audio technica open back headphones doe 😔
ooo, which one?
I had the ad1000x for the longest time but wanted the 5000x eventually, it's only gotten more expensive over time tho
$2200 rn which I think is a few huindred more than the sennheiser 800 one
Hmm, it seems to be a fairly flat headphone with only a spike on the treble. Your best bet is to reduce the high end/treble part of the keyboard. As for how, maybe a mat for the keyboard or an even deeper switch.
Yo lets fucking go

❤️❤️
WOOTINGGGGGGGGGGGGGGGGGGGGGGGG
JK
Act like you didn't see anything plz 🙂


Oooopsiii
https://youtu.be/MPNaurJS78M?si=IU5azxPeX4kYH3T5 just letting you guys know new monkeytype world record is on 80he
the 60s monkeytype record has always held a special place in my heart, and i'm extremely happy to finally get it done after all this time. I took so many hiatuses from typing since my last video mainly due to college and generally having more responsibilities and other interests. huge shoutout to @rybertriongd for supporting me throughout this j...
sander would random introduce some random program setting that he has to turn caps lock off/on every 3.5 letters, and then not tell him
haha great music choice from that guy
How often does the 80he black zinc alloy frame come in stock?
Won't be for a while
cro needs new switches
he doesn't care as long as the keyboard types
Are there any companies that sell your products that might have any? If not do think it will be longer then a couple months?
Hopefully not more than a couple months
Is there a thread in here or an email that can notify me when one is in. Or is there a way to put payment down on one to secure the next batch that comes through?
There is not, but once it's available again there will be sufficient stock
Why are the wooting switches so cheap and the rest so expensive? https://wooting.io/products?category=switches
Because we are the only middleman between factory and customer
Ok sounds good, I'll just try to keep an eye out. I appreciate your time and quick responses. Have a good rest of your Mark!
You also 
I have a wooting 80 he does it have a macro feature like apex pro
no
your best bet for macros currently is autohotkey
why does my friend say the 80he is trash? he has a m1 v5 tmr and he keeps saying i wasted my money on the 80he is he right
Why not ask why your friend feels it's trash? Pretty meaningless feedback without giving you details or facts of why it is trash. Hard for anyone else to know why he thinks that in details, it's his opinion. Pretty subjective. If you just want keyboard to write and nothing else, you could manage with 10 euro/dollar cheapo basic stuff. So you got to decide what you want to pay for and if it's worth it to you. Could say same about anything. For me, durable, great warranty, good quality specs and product that I like in many aspects, and I like the customer experience I have. And I use these a lot and I like my tools and space to be nice so spending for my hobby isn't a waste for me.
he says its overpriced, he says it should be 150 for a zinc alloy not 300
also i use it for games like fps games and gd
That’s what you pay for the m1 v5, then you pay for the wooting software, support, community, etc
Ok. Well, it costs what it costs. They got to make some profit and they don't make the kind numbers that allow crushing numbers. And if you want to cut costs, buy other case/take the plastic option if you otherwise feel you like the board and technical stuff.
he calls me "wooting brainwashed"
So? Doesn't sound like a very nice friend if he wants to mock you.
You got to make your own decision what it's worth to you. As said, I would not say it
It's per say smart to buy metallic/heavy cases etc. It's literally just a feel and style choice. It's not "smart" choice.
It's a hobby as well. You got to know if it's worth it to you. There are other case options to cut cost if that's it. Not all things are for all cost efficiency. You buy stuff because it's nice or just because you want to. Bet your friend has bought things that are just nice and can't really back their argument with any real facts or other reasons compared to cheaper options.
Your money, you use it as you wish. Ain't no one else got a say in it. If you are not broke and can afford stuff, ain't their business and they are a poor friend if they mock you for your tastes. They can argue their case of preferences or technical specs against other products if they want, but I would not get it started by calling a friend "brainwashed".
guys raw zinc or holy80?
Thats what alot of people say when they have a much cheaper product
Also i wouldnt buy tmr board if he recommends it cause having mech and hall effect switches together is wack
Your friend only cares about what is in the spec sheet
he claims the 80he is 3k polling btw
Yeah hes just arguing over small numbers people wont tell the difference
Just want to mention
https://wooting.io/post/hall-effect-vs-tmr-pause-the-funeral
This article explains HE and TMR pretty nice if someone is interested 
I think he adding the scan rate and 8k polling without tachyon mode which is i guess true but the diff is so negligible its just arguging bigger numbers better
You cant verify if the numbers are better without using tools
he got it from some random website and says they do accurate testing
Yeah there is testing tho idk if person playing will feel it
Like i watch a youtuber review wooting keyboards they get very low scores for precision scores but pros still use them
Budget boards are good for people who cant spend that much but a wooting is like a great overall product that you probably wont get somethung better with what it offers
Like they spend years updating the software and have a warranty
And old product still gets updates
Theres alot of chinese boards where they just release it and abandon it or somethung is really wrong with the firmware
This whole conversation sounds like his friend found the peripheral discord crew who don’t understand how the Chinese ‘precision’ tests mess up and aren’t accurate and is blindly wanting whatever is at the top of their list
Honestly, you just need to look at what the pros use when they arent sponsored to use a specific product
I ordered my 80HE yesterday, When is it coming bro 😭 (all cheapest options).
Check wooting huh
Hub
Ordered some Geon RAWs for my 80HE to switch out from the Tekkers, its been two weeks though and I think it got delivered in a completely wrong country 💀
Hopefully I can get em eventually though cuz i love their sound
though I hear people say Owlab is just better Geon RAWs
I have some keycaps sitting here ready to go whenever I get em
should i use the beta wootility or the actual released one
We would typically recommend using the normal client. Betas are either to help fix certain issues on a test basis - or to preview a new feature that isn't quite ready for primetime.
If install switches with a 3.5mm bottom out, will cherry profile keycaps still experience interference?
no
there's no interference with cherry profile keycaps, doesn't matter if you install the switch north or south facing
except like rgb clarity
Well it all depends on the direction of leds and the switch design.
i got my wooting 80he today
Nice
Ice ice baby
Would love nice keycaps for ISO ES or at least wooting to make them... there are almost no Spanish ISO keycaps on the market
As in PBT keycaps from wooting
very nice, i have something comparable cooking :)
Waiting for some replacements, but it looks like this for now
I have never been more dissatisfied and unhappy with an assembly process as I am with the Wooting 80HE. Specifically, the JST cable. This is the most finicky, unreliable, and sensitive cable I’ve ever had the displeasure of working with. The minute you think it’s securely fastened in, it disconnect the minute you try situating the PCB in the case. Please tell me somebody has a fix for this or something before I rip all my hair out
Use your fingernails to make sure the cable is fully inserted
Apparently you don't need to worry about using the routing channel
hey guys just a question, if I use my wooting 80he for a long time do I need to maintain something in this?
Clean it
Mine is arriving today, 🥳🥳, after my cat had vomit on the ss apex gen 3 and died the moment i booted up the board.. looking forward to find out key differences 🥺
Hi! Im am considering to get a keyboard from wooting, but i am stuck between the 60HE v2 and the 80HE. What are the differences, other than the size?
Those are the main differences, apart from that it is mainly small stuff like mounting style, plate material, stock switches
Oh and 60he v2 offers split space
Thanks!
the side with the blue tack (not really blue I forgot what colour it was) is the side you have to plug in
I’ve been there before..
my worst part was tryna unscrew the screws
took me like 30 minutes
Sounds like your screwdriver didnt fit
how is the functionality of the 60HE v2 keyboard? can you still use function keys even though it's a 60% keyboard? (as seen on the razer huntsman mini)
Nah, it‘s just because a screwdriver of the wrong size makes it harder to unscrew a screw and tends to damage it.
you can because of the magical most useful button called the FN key
oh yeah makes sense
I wish they sold kbd fans cases on the wooting website
kbd fans only use dollars for some reason it’s confusing
You can convert the prices to your local currency
Or just do what i do and assume euro is about the same as dollar and just use the number that‘s on the website 
Honestly, with how the pound is doing, you can probably do the same thing i am doing
But yeah you can just use google for conversions too
I mean isn’t pound like the strongest currency or smth?
or am I wrong?
every country I’ve been to no matter the currency pounds is stronger
Idk enough about economics to say that but i am pretty sure it was the highest value per unit for a good while yeah
I mean originally it signified one pound of silver 😭
Imagine if you could still get that
yeahh nvm what are we
doing
sorry for cutting that off
3 dollars bro that’s like a Milky Way bar
I like euros better
in real life everything costs less
(especially in Lithuania)
I ain’t paying no 2 pound for 0.5l cola
but I would pay 95 cents
I just like euro cause i dont need to convert my currency when i go somewhere
yeah can’t relate to that one
the countries im going to (except Lithuania and Poland) all have different currencies
Nvm
Poland has a different currency
one time we ran out of zloty and I really wanted to get zabka so we walked 10 minutes to the mall which was closed
Britain sucks
bring wooting to curry’s
I mean we do have Wendy’s here and Chick-fil-a and I heard smth about a Raising Canes..
Raising Canes is delicious
wow you live in America?
do you see surrons?
can you steal one and ship it to my house
and you send me raising canes
Where I went to university had Raising Canes in the area, definitely my favorite fast food chain at the time
any idea why my keyboard doesn't turn on when I turn on my pc? I need to unplug it and plug it back in for it to start working
Your USB controller probably hates 8k polling. Try plugging the keyboard into a different USB port, preferably one farther away from the current port. Then restart the PC and see if the issue persists
I'll try that thanks
very oranje
when ordering the 60HE v2 module, do you get the silicone base with it?
Depends on what you mean with "silicone base".
You get the friction fit layer which is pre installed and also a alternative foam sandwich layer if you want to use tray mount etc for some cases
i guess i mean do you get both of the dampening bases that you get when ordering the pre-assembled 60he v2, when you order only the module? if it makes sense
So you mean the case dampening, no you get neither.
They come with the cases
Plastic includes the foam
V2 Alu case includes silicone and foam so you can choose between them
ah ok so if it get the module and then a sepperate case from wooting i will get the two. Its because the nordic layout with a split spacebar is somehow not available preassembled
Again, it depends on which case you order.
if i choose to get the the alumaze60?
ok, thanks for the help!
<@&1098943457654997093> missed spam? 
I believe this is a "joke"
I just deleted it. @toxic timber don't post it again or you might get bonked next time.
mb i just saw someone posting those mrbeast scam images
Hi
I figured, all good. It just looked so similar to the scam message, I almost banned you
Yo, does anyone know if the 80HE has some kind of protective coating against moisture and some minor water drops like from the saliva, sweat etc. I am kinda curious cuz that in such a high quality keyboard it should be some kinf of protected but that is why i am posing rhat question
no it doesnt
i only know like one keyboard that has a coating its not a common thing
Wooting keyboards have water resistant coating, but this does not mean it's water proof. If you spill something, you'll still need to disassemble the keyboard and clean it, to avoid corrosion
But I mean it protects from some every day moisture like the one in saliva when you talk or sweat etc.?
yeah it should
keyboard not gonna die from you talking close to it unless you drowning it in saliva on purpose
and for sweat it might be good to wash your hands etc
just for hygiene
Man is trolling
mine is arriving monday and i'm super excited
hey guys i just got my tenz takeover 80he and it doesnt work, i plug it in and the e and r keys light up and windows gives me a notification that the device i plugged in malfunctioned, any help?
this is fresh out of the box i plugged it in with wootility open and it hasnt worked
tried
ive tried literally everything online are there faulty units like it says online?
What error are you getting when you try to restore the keyboard?
it doesnt show up in my devices even though it shows up in my device manager as wootility restore
i tried the website as well as the app and neither of them show the keyboard
this is what shows up in my device manager as well
So it shows up as "Wooting Restore" or "Unknown USB Device" in Device Manager?
it now shows up as unknown usb device because it said to uninstall all drivers that had to do with wooting, but previously said wooting restore
Where did it say that? Did you follow this article? https://help.wooting.io/article/173-how-to-flush-all-dead-registry-entries
Sometimes even after following this guide Issue - Wootility doesn't detect the Wooting the Wootility still can not detect the keyboard, this can be because of d
Step 3:
After the enabling of the unconnected devices, they will appear up as grey out entries in the device manager. You should uninstall every grey out entry, that is related to your Wooting device. If there is multiple trees of the same device name, as shown below, these also must be uninstalled.
Did you unplug the keyboard before uninstalling all the devices that belong to Wooting?
yes
Restarted the PC? Shutting down won't help in some cases
hi yall, just got the TenZ Wooting 80HE, I tried to type in the link that came with the box and im ngl, its not working



