#🔧│keyboard_modding
1 messages · Page 928 of 1
Redux lol
A case with hella holes or a case that is fully built with not holes
is basically what's being asked
case with zero holes
ye
Specs Made with aluminum 6063 Compatible with most 60% PCBs Weight: 760g Typing angle: 7° Available in black, red, white, purple, and acrylic 11 5/8" x 4 1/2 " Compatiable with Wooting 60HE and 60HE+ Comparison with Tofu60 1.0 Sandblasted brass weight is added internal, the weight is increased Replace the round rubber
U talking about this case?
so point is
depending on how well the case is built and what unique factors and character it can give, it will def influence on how your board sounds
its not all about the switch
Gotcha
But dont you start with switch and then build board based around the switch?
pfft no
the other way around
like would you pick a switch like the geon raw then decide what pcb to use?
We need rukus pxe 😛
I thought it was always switch first
Case firstttt
hekkkk no 
MX world it would be the case/kit first
but since HE is very performance based
it would be the PCB/Kit first
then the switch comes after
@fluid ravine Besides buying a new case cause im not gonna do that right now is there anything I can to make 60 HE V2 sound better? Like is there a better case dampener than the EPDM foam? I definitely 100% prefer the EPDM foam over the silicon bottom case dampener silicone sounds super weird imo
Without knowing a specific goal or problem from your board i can't say
I dont know what would be considered better to you as well
it's like know your needs first then ask for it
I can help guide but I can't give you a direct answer
That's how TuanGPT works 
Idk how to answer that
haha yeah it's a bit complicated sorry
I just want the board to sound deeper and richer @fluid ravine
Richer = fuller sound?
Yes
Understand how foam works, experiment with your configurations like with or without certain foams, sheets, and mods.
And if it were to you buying a new case, look for Wooting v2 compatible cases that has a decent or good isolation mounting systems that are well built and everything
It's all about experimenting and understanding
I dont think I have the patience anymore for self-experimenting if i gotta be honest lol
have you read my thing about how foam works? or like watch one of keyboreds videos about it?
I havent send over
#🔧│keyboard_modding message here's this
here's this too
Properties of plate and what mounting systems do with sound
Thanks
Absorbing TuanGPT keborb knowledge 

https://www.youtube.com/watch?v=QFGTlwgihYs
@fluid ravine Even this sounds pretty damn good in an 80
very foam and ceramic influence
Yeah cerakeys
um wheres the switch
lost in the sauce full of foam and ceramic
ok...
https://www.youtube.com/watch?v=85PmY56VW_s&t=170s at 2:00 I like how the owlabs sound in here its a 60 HE with FR4 plate, gasket mount dt60 case
Relevant Links:
Owlab Ti HE - https://unikeyboards.com/products/owlab-ti-he-magnetic-switches/?sca_ref=5261016.w1FzcUQlmA
Brand Page - https://www.qwertykeys.com/
Socials and other platforms:
https://linktr.ee/Merkeebs
https://www.instagram.com/Merkeebs/
https://www.tiktok.com/@Merkeebs
https://www.facebook.c...
@fluid ravine
Excuse me sir do you happen to be a real person, because that is a very odd message to post in multiple channels upon arrival on a very new discord account 
lol wtf
seemin how they acc was made 3 weeks ago and they just joined today prob not
any point in getting a 60he v2 module when i'm already using v1?
I do have a spare case, switches and keycaps that my v1 could use lol
I'm just wondering what the angle is for an account to post something like that
With no links or anything in bio
unless u rly want split space no imo
the diffs ik between em are like sound/moddin stuff
which u can do to ur v1
ehh split spacebar is kinda weird tbh, and keycap compability also
pls help delete :>
he's bonked
Kinda want to try everglide skyline and master
Only everglide switch worth trying is unionwell yaoguang (basically cheaper ice shine)
"high quality double shot pbt keycaps"
That quite the wasd usage
UV print be like
might even be something else cause I think UV printing the entire keycaps is kinda hard
God help us then
UV Coat with Laser Etched legends
Should i hard mount or friction
friction
Is it worth replacing the stock stabs
what board?
60he v2 module
normally you can get away just fine if you give them a proper tuning
You can lube any stabs to sound and feel the same if you properly do it with lube without extra mods
But newer gen stabs have molds that makes it easier to tune so it requires less lube
so for you it is optional if you want to grab a new set of stabs to have an easier time tuning or just go all out and try your best to properly tune your stock stabs
yall think these are good for the 80he? i looked up a few moding videos and found these witch sound pretty good
No

whats wrong with them?
everything
would they just not work on the 80he or are they just bad quality?
everything about it is bad
just no, dont even bother
Which stabs would u recommend
Knight V4, Typeplus YiKB
is fourwrap on the list at this time?

https://youtu.be/eZmWFyDdM7Q
Fourwrap on juna60
Broadcasted live on Twitch -- Watch live at https://www.twitch.tv/bowlkeyboards
A bit hard to hear properly coz bowl types so damn fast 
https://youtu.be/nIdR1G_HdUs
Oookay better soundtest and guide here
Lowkey these are some of the best stabiliser I’ve tried in a while, even with no lube the performance is serviceable, after lubing it pretty much eliminated all unpleasant sound, whilst maintaining a smooth and consistent key press.
Very strong alternatives to other popular stabs like knights, typeplus, and cherry.
Instock at:
https://www....




wait i just notice did i miss a whole lore about "Ser"
It's just their recording. Those are ancient switches and sound horrible compared to newer stuff. I suggest checking Wooting's switch database for recommended switches and their sound tests #🪛│modding_faq message
just me and Varedis larping
ATK Velota upcoming switch, not a gateron this time: Silver Regent
I still can't get over this crazy translation 
Wadafak you mean "one master and many slaves" 
MFAO
Crazy marketing bro 
one pcb and many keys
atk slop
Atk go back to mice buh 
When is Wooting making tmr and what are your impressions on tmr?
39g mouse is actually 45g, so the keyboard is actually gonna be missing keys
Someone get Sno
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
or that
Thanks
when the hell
There's also an article you can read https://wooting.io/post/hall-effect-vs-tmr-pause-the-funeral
TuanGPT, provide tldr on the article


Thanks so tmr is basically just more power efficient version of he with a bit less stable response
Are you Optimum the YouTuber?
what

should i LMAO
nah I read it
Prob ðŸ˜
One pcb and many bugs

4696kHz and 600kHz
Damn
Very nice specs
I dunno what they cooking lmfao
smh not even split space
Yeah needs 15u spacebar to be remotely usable 
They basically saw the lists I made and gave the marketing intern a job to do that just for products they sell I assume
Milktooth has better ranking coz he has the poopiest switch of all time 
Poopy auditory experience 
Looking at their shop they have mostly old switches
Gaterslop strikes again 
Milktooh made another best he switches video
Nothing beats milktooth HE switch filters
Crunch 😛
Featuring the geon raws, neo lavender, haimu doves and the sticky rices and puddings
Speaking of gateron
Shafie i have a business idea
Yeah saw that 
HE switch shop and the only category we have is crunchy
i still prefer my idea of turning wooting into an AI ram company, then immediately doing an IPO
Maybe each switch has a crunch % and in the filters on the site you have a slider that you can adjust to find your perfect crunch

every wooting employee gets 1% stock, then we ipo and sell all the stock asap. Then we remake wooting as 'Wooting OG' but this time everyone in company will be 10 billion dollars richer
Lekker v1 crunch is where it's at
First, all employeed need to get some amount of shares tho
don't worry i thought that idea through already
if every wooting employee gets at least 1% stock, when we hit our trillion dollar valuation we are all worth 10 billion
I really hope it's not just a step up from tikken
especially when tikken is really really cheap
i assume it'll be 4mm jade ultra type switch
I hope it sound much better and more stable without costing more than $1
A man can dream 
we can do the facebook founder strategy
when we all have billions of dollars, we move to singapore and retire, buy an entire block of apartments
and everyone just lives in the same building

Petition to put a bidet on every toilet
of course. If the toilet doesn't have a remote control flush function then i don't even want to sit on it

we can never go back after we experienced that luxury at last wooting meetup
It needs an auto unclog function
My life will not be complete without this
Split stem diamond without the donut magnet
How did u guys remove the pcb after friction mounting
You can just pull out the module
Pull off the keycap to the right of spacebar, you’ll see a hole, use the orange puller you have in box to hook into hole and pull
any idea what buzzwords to use when looking for keycaps to get similar texture to current wooting 60he v2?
(Good) keycaps dont usually list the surface texture because that is not usually a concern and they usually have a slightly textured surface
I also dont have the wooting stock keycaps so i cannot compare them to others i own
aah okay
fbb retro snow blue
Stock 60HE+ with UFO Switches which stabilizers or plates will they not detach on
FBB really do be the best value sets honestly
SWG good value too 🤤
swg good too, but for higher price bracket
Tru tru
you'd have to ask gravastar that, i'm not aware of how this issue interacts with plates specifically
are they just saying it may be loose on some plates?
SWG be getting close to GMK tier now in terms of sound and quality
or overly tight? I don't think i've seen this issue before myself
Seems to be a cut above kkb now
Basically losing money not buying that
My kkb nichrin set will be arriving next week 
https://swagkeys.com/products/group-buy-swg-skeletoon
I was peering at these myself
SWG's second original design, SWG Skeletoon: designed by the Bowl team offers a very classic, yet modern one tone Taupe set with fresh novelties using skulls and skeletons in a cartoon style. The Novelty Kit will be made using PBT underlayer like the tulip kit from SWG Beige. GB Period: May 18th-June 1st ETA: Q4 2026
the switches p much just dont click in right for example if you take a keycap off, the switch comes off with it (only with stabilizer keys)
ill have a look and see if they list whats compatible anywhere
Was also eyeing that one up
There's also king of the seas if you're into a certain gen 3 legendary pokemon
I've never been a fan of pokemon, never understood the hype
Heretical to say, but it's my truth
very very mini question, whats the material of the stock wooting 60 he plate (the v1 or the one before all the other versions)
Steel
thx
DO THEY HAVE GROUDON AND RAYQUAZA
It's just Kyogre rn
FUCK
These are so fire, but I already got swg euler so don't need another keycap set this fast lol
Can never have enough keycap sets just ask thockfather
Maybe I ball out on GMK Pandemonium who knows 
~~There is rayquaza keyboard tho
~~
Thockfather doesn't question whether he needs new keycaps, he questions whether he needs more shelving for his keycaps
This gonna be expensive 
rayquaza is tempting
if only it was a fullsize custom
Word 
things that should be standardized but aren't:
- keyboard layouts
- power supply cables
- H60, H87
just took out the plate/pcb foam i honestly fuck with it alot more
why didn't they make the 80he an h87 layout
mmm, split space
Look back on messages about this debate in this server lol
sounds like a rabbit hole
Yeap 
just want the tldr
I could start a debate about it but big sno will smite me down 
it's not as universal? like they don't make as many cases and stuff for it?
curious about the "other factors" that outweigh standardization
it's literally 3 keys off h87
part of it is prop about the knob
oy vey 
there's f13 version and non f13 version of tkl layout, but I dunno if it's that big of a factor, they went for f13 with 80he kinda
kinda?
I mean, yeah? There's like 1 extra key besides the f12
F13 (H88) is standardized too 
the frow area is from f13 tkl layout, thats what I mean, but that's the only variable thing in a TKL layout that I know of, so not sure what other factors would be
Possibly 



