#🌟│wooting80he
1 messages · Page 311 of 1
changing switches also make almost no difference in performance, unless you use ancient switches like lekker v1 or raptors
thanks guys!
In future if wooting decides to add 0.04rt (below 0.1mm) then youll need more stable switches like ttc magneto for example, for now normal jades are completely fine
so moving from normal gateron jades to the jades pro will not make me better if I usually use 0.1mm + rappid trigger, is it right?
no not really
thank you
so I only will add the O-rings which i have ordered to my current keycups and switches
im not sure if putting orings in switches is a good idea
we talked about this a couple days ago but i think chatgpt convinced him its a good idea
I should expect the delivery to be delayed again (Waiting for PCR case @EU-Beloega) from 10-25Feb
are there any black 80he iso plates yet
i got ghost its so nice
ye, for sound dampening it should fit very well the O-Captain 40A-L 0.2Mm, it thicknes is only 0.2mm while the full travel distance is 3.5mm of gateron jades
It may fit, sure, but it might mess with the board's travel distance detection.
will get 3.3mm istead of 3.5mm, who really plays at more than 3mm travel distance?
Not unless you paint one. No plans for one.
Is there a website or forum for different 80HE profiles?
Thank you 🙏
How long did u all need to get used to 80% layout? Coming from a longtime 100% fullsize the 80% keeps feeling odd to me for some reason. I have no idea why but its weird lol. Might be muscle memory or something idk...
Been on a Razer blackwidow elite 100% yellow switch for about 6 years 🤣

maybe get separate numpad
personally dont see why its faster using a numpad
if you really need it
Well i dont miss the numpad
Just the layout feels off a bit to me. I sometimes wrongly click buttons
Because i misscalculate the spot where the button is
Compared to my old keyboard lol
ah then give it another week
And i keep changing actuation points and such but i dont really know what im doing to be honest lol i just try alot of stuff
My old razer switch was 45g, 3.5 max and 1.2 actuation (yellow linear). Was trying to let my 80he feel and click like my used stuff
But i think thats impossible since its 60g force lekker v2s
was it 3.5mm travel
You might like jade pros then, if you decide to swap switches
Jade pro's are a bit more like these specs right? @lime falcon
(- actuation ofc)
same travel distance yea
Bro your pfp is that your pc?
Yeah
Niceee
😄 waiting for the 5090
It’s too expensive for me
Lekkerv2 vs jade pro is a huge diff in actuation force right? 36g vs 60g
I was going to get the 5070 ti
So the jade pro's should be way lighter to click
jade pros are 50g
Oh i think i saw 36+5gf
initial is 36, bottom out 50
L60 is 40/60gf
Ah so jades are a bit lighter
but jade pros will feel heavier than 36 because of longer spring, probably similar to your old switches
What actuation point do you use personally with your typing profile? And what switches do you use ?
I use jade pros and only have one profile
5039c4d3dea2c0d28b399e46946a1cb95e33
Oh really
How does this work? I'm new to the profile thing 🙂
v5.wootility.io > My Profiles > Import profile
I have pretty low actuation/rapid trigger on wasd, it might be too sensitive for you since you just got your 80he. you can make it higher
I use 1.0 gaming profile and 1.5 typing and rapid trigger on gaming at .5 on WASD
But ive been experimenting with it alot haha so im a bit lost what works best now
😂
Btw its kinda hard to get the switches out, gotta give it alot of force with the switch grabber. Is that normal? I put the grabber on the sides where its supposed to be at and pull it out. I've watched some videos on yt how to do it but on the videos it seems to go easier with less force
Yes with lekker v2 its normal
jade pros are fine
Oh they a little harder to get out then others?
Yes
Its easier to pull them if you fully disassemble the keyboard
and just pull them from the plate
He has 60he and 80he
Got dat epic gamer setup
rain 
Watchout for big apple and his ghost 80he
niko with frost 
Snax with ghost
Logitech bribed him
@lime falcon Janusz is old but still can compete
But look there will be massive drama if mouz and g2 get to spodek
Because mouz kicked siuhy
snax is cooked in 2 tournaments
niko actually left monesy for degster and 40 year old magisk

||Money||
I’m on the verge of buying the Wooting 80HE. Is there anything I should know before making the purchase? And just between us, should I consider any other keyboards in this price range? Also, aside from the standard option, which keycap profile would be the most comfortable for it?
Everything in keyboard space is preference
i would personally recommend keycaps with cherry profile
as it is slightly shorter than OEM
By the way, some people might have both case color options. In your opinion, which one looks better—Frost or Ghost? Or is it just a matter of personal preference?😃
wooting has best software/firmware, performance, long term product support/warranty
Yeah, have fun with the keyboard, it's built pretty well from my experience. Also the fact that you can modify it without losing warranty.
Its all preference
Are you considering module or prebuilt
How large is the 80He?
because sometimes my mouse bulbs into my keyboard and I use a 75% keyboard
its bigger than 75%
Like TKL maybe lil smaller
slightly
Dimensions are listed on the product page
I’ll buy the modular version since it’s a bit cheaper, and I also want the Lekker L45 switches.
module isnt cheaper
I’m not getting keycaps, and it will be cheaper with the pre-built version.
ah no keycaps, then yea
Just ordered myself the 80HE Zinc Alloy. I have used another brand for over 12 years and this is the first time I have not puchased one of their keyboards. It is also my first wireless. I am excited to see how it performs. It is also the first time I have not had a full sized keyboard so I may just use the 80HE for gaming but we will see.
I am using the Razer Huntsman V3 Pro now and I love the feel of these switches so I hope I will enjoy the 80HE Zinc Alloy. It comes with the L60 V2 switches. I did a little research and I think they are close.
80he is not wireless idk where you got that misinformation
Oh okay. I must have just assumed it was for the price and by the image. Well thats okay. I will test it out regardless.
Why u get a new keyboard when u got a huntsman v3 pro?
Because I wanted to? haha. (Gotta love the internet, same in every Discord or forum.)
the technology wooting use is sadly incompatible with wireless as wireless adds latency and the tech makes it hard to power using a battery due to how much power it draws
i hope you have fun with your 80he, i love mine and it started me getting into this hobby now
Got it. I am interested in seeing how it performs I have been reading about them for a few years.
🙂
I mean, 8k wireless is a thing, works well in mice.
But the power draw issue is the main killer of wireless with HE keyboards
I am worried about that.... I have already started to go down the rabbit hole and looking at custom keycaps... Not good. HA!
Yeah I have an 8k mouse, I am a big fan. Never thought I would have liked it.
than i tought i would in my entire life
850 milliamps is quite a bit for a keyboard.
Thats not good to hear.... need to block you... dont need any influence haha JK
I just bought the PCR Ghost too... Gonna see what one I like more and give the one I dont like to my buddy. The Ghost looks cool but I think I will like the Zinc
So this is gonna kick the crap outta my Razer Huntsman V3 for CS2?
ghost looks really cool
i have one of those
tho i did case swap into the gt-80 from kbdfans
Not gonna lie, its solid. But I am just looking to change and try something different.
if you want to have some changes and stuff to your board i highly recommend doing some light modding
few small cheap changes can make a big difference
so you wont have to buy a whole new keyboard every time haha
I'm listening... What do I need to buy... haha
you can swap switches, add different filling material, play around with tape mod etc etc etc
my current iteration has poly fill inside with this case, geon raw he switches and 3 layer tape mod
Okay so I just ordered these Ghost as well and some other things. Do I need to lube them when I get them or just after a while?
80he is factory lubed
after a while or if you want to touch up something mainly
Its pre lubed
yeah its factory lubed but sometimes factory does an oopsie
🙂
but yeah if you want more info on modding there is a lot of resources and knowledgeable people in #🔧│keyboard_modding #🪛│modding_faq and on the wooting youtube channel (as well as other channels also of course)
right now, its not that important cause the lekker v2 are good enough switches for fps
they dont really have much of a performance difference other than wobble
if you want the best switches from a feel/sound perspective, right now the recommended ones are geon raw he and gateron jade pro
depends on how yood you are !
why is it so hard to pull the switches from the 80he?
GMK Mictlan
yo guys, is your pg up and down of a lower height than other keycaps (stock from wooting) or did I accidentally put the wrong ones 
What profile are original wooting keycaps?
OEM - or Cherry for the Kana and Take Control sets
Ok ty
why cant i select switches while trying to order a 80he
Are you trying to order pre built
ye
Pre built is lekker v2 only
Because stocking more pre builts in various switch options explodes the cost of storing and managing all the different skus
Would 3x the different kinds of keyboards you have to manage instantly, and this is only if you take lekkerv2 45, 60 and gateron jade
You can get the module and select your desired switch there (or order without switch and get a better one from someone else)
Because it... it's prebuilt? 😄
That includes the switches, which are L60v2
What's Wooting doing recently? Any new products in the work? Refresh the two he? 96% with a knob?
No major product announcements at the moment.
Aside from the 80HE aftermarket cases, and 60HE cases (Optimum, Owllabs)
Wooting 60tmr In late march 
Aftermarket case for 80he from wooting?

No? 😄
Do we have any approximate dates ?
For?
80he aftermarket case for 80he from wooting
Buddy...
Yeah?
You need to start reading. We're not doing any new cases. These are OTHER companies.
Next year maybe wooting x owlab only for 400€
400 euro?
😂
😵💫
anyone knows a good retailer around NL to get a fast shipping on jade pro switches?
Quick question, if I order in Germany, has the price already been cleared?
ships from netherlands
Yes.
okay thank you!
i heard someone got there wooting 60he in 4 days
how is that possible?
mines is saying it will come on feb 28-14
By it being in stock in their particular combination of parts? 😛
i thought it was because he was near the area or something
I mean that helps of course. Faster to ship something closeby than halfway across the world.
i was looking at pins in batch updates and i heard the first batch will take serveral months to ship. i ordered my wooting 80 he and this is the third batch. will my order take longer than feb 28 to come to my door?
i ordered it 4-5 days ago
did anyone ever have problems with shiping, or didnt arive?
also can anyone that has a wooting "not ordered but with them physically" can explain the past few updates because ive been watching youtubers review it and most videos were around 3-4 months ago so i know there is alot of updates but i dont know that since eevry reviewer made a video around the same time so can ssomeone explain a few major wootility software updates that have happened to the wooting 80 he ?
what does "not ordered but with them physically" mean
also you cab use wootility for previewing without having a keyboard attached
The 2 kb per customer limit was only for batch 1 right, it won't cause issues/delays to get a 3rd one now (with first 2 being ordered back then in batch 1, and now a singular order as third)?
meaning that they have the device with them
like you can say i own a wooting but do you have it with you physically?
is what im trying to say so i want ppl who have a wooting keyboard with them to give me some updates about it
and im tryna say this message doesnt apply to people who dont have a wooting with them physically
like they dont have a wooting in there house
also is v5 out or is it in beta still?
Yes.
it's still in beta yes, unfortunately can't see an extensive changelog once up to date from what I see to provide you from here (I think it shows a changelog of what's new in latest update during a new update, though this might only be for the KB firmware not sure)
I'm sure you can always ask about any specific feature/fix you might be wondering about here and someone can get back to you on how that is now
Mansen you don't happen to know about the 3rd order rule just by chance? I really don't want to bother the already busy support mail again, for a very quick question
I know it was a big deal around first batch (anything after 2nd was delayed to prevent bulk buyers/resellers etc), but wondering if a 3rd purchase on my account would cause it to be delayed any more than a first time buyer would, since a friend is looking to get one and don't want it to get stuck in more delays because of it
it was more than 2 boards per order got moved
but iirc you can just order the amount you want now
Ah okay thank you! Yea wasn't planning on getting many, just one more but was worried it'd depend on having had any previous numbers (friend wants to get one but I have wooting store credit on my account so wanted to order via me)
Actually I guess should've asked if it's possible to transfer wooting store credit to another account so he can just order too using it, that'd work too
I know you can transfer orders to another account at least
i re lubed all my switches and it was a pain in the ass lmao
Was it worth it?
LMAOO 😹
Any creamiest switches compatible with wooting 80he
Ask in #🔧│keyboard_modding
LUNA
anyone have recommendation for a wood wrist rest for the wooting 80he
Yeah thats what i like to know too. Does it make a big difference?
i just relubed the factory lubed gateron jade gaming switches and i noticed a difference
I got prelubed jade pro's coming in in a few weeks
Curious how they feel compared to the lekker 60v2
cant say i have tried the lekker 60v2 but i have herd anecdotally that the lekkers improve with lubing
nice 🔥
massive difference lmao
my 80HE is 7 days old now and after lubing it myself instead of factory lubed, it feels so smooth and sounds creamy and nice
yes very much so
for me probably not worth buying different switches
you have lekkers 45 or 60?
60's
Does anyone know if partially putting the kb on a mouse pad is bad for the mp?
What is the best magnetic switch in the world?
done that for years and my mousepad is fine
so i would say not to worry about it
Thats preference
ty
Deskmats are the way
Even my 35" screen stands on one
I don't like being limited by mousepad size
yea i got the artisan mouse pad
don't the artisans have a rather delicate surface?
I read some things, if they have a special surface, I indeed would be careful with putting a KB on
putting kb on it is completely fine
you barely move your keyboard
just dont put monitor or anything heavy on it
^
deskmats are to small for me
in height that is
Does anyone know how to turn off the built in keyboard on intel?
The what and the what now
80HE with Geon Raws seems to be the most "in" popular choice.
Or Jade pros
Is there any sale on the 80he?
no
never?
No
Quick question, can anyone how’s package didn’t arrive or similar tell me if they got there money back?
How and why depends on what happened exactly. You'll have to wait for our support to help you out.
Okay, but if it’s not my fault I get my money back, right?
Or a replacement shipment, yes
Okay thanks
I am done waiting for the white zinc and got the black one instead too tempting 😦
Where can I find the design files for making my own custom case ?
On github
just swapped my black plastic case to a frost case
honestly i feel like frost shouldnt be a module only option because holy
We have to set a limit somewhere - every time a new case gets a premade version, that takes away PCBs from other ones.
Is the 80he the BEST kb in the wrld????
depends who you ask
I have an apex pro tkl 2023 Steelseries is it worth the exchange for 80he??
mechanical to HE is always a feel changer
isnt apex pro like semi hall effect
theyre magnetic but not hall effect
It is Hall effect
yup youre right wrong info
I got the Same Switch , I Think yes the apex pro tkl is Not Hot swap, you can Not Change anything, plus the Wooting got 8khz , and way better Quality in my opinion
I got now the wooting 80 he , bevor I got. the Apex , wooting in my opinion way Bettrr
Not unless you mod it , lekker switches Rnt that good
I’m planning to buy the Wooting 80HE, but I haven’t decided whether to go with the Ghost or Frost case yet. Could someone recommend some cool keycaps from AliExpress that would go well with both options? I’d really appreciate it!
Better than steel series omnipoints
At least you can swap wootings switches 
Oh yeah ofc it’s 200x better than steeelseries
Although yeah jade pros/raws/ttc clears
I ordered geon raws for my wooting uwu cuz the lekkers r literally horrible
Idk I haven’t got mine yet 👀
Like this actually can’t be real that it gets sold and performs like this icl
Ye it’s just crazy it’s 40 euros and the 10 euro Chinese Sayodevice outperforms it heavily at stock
i dont actually know what switches came in the sayodevice tho, i know i got told to get the 4 key one tho cuz it has better switches than the 3 key one
does anyone else has the "problem" that the slightest wobble on each key actuates it? or maybe its just the thing with HE keyboard i just cant get used to. kind of annoys me in shooter games.
Try changing the switches, jade pros or geon raws have a little less stem wobble
They also have a shorter travel distance so if you bottom out during gameplay it feels more responsive
im kind of broke rn so maybe changing the actuation point a little lower (like 0.4mm) will make it a little bit less annoying or easier to get used to.
Or that yeah, sorry 😅
but i think later on i will change them, overall they are still way better then the cherry mx reds that i had in my previous board
hi, can we rotate the switch on the 80he to prevent cherry keycap interference ? will the board work fine as usual?
Unless you're using some exotic switch, rotating it shouldn't be required.
All of our switches, as well as Gateron and Geon (as far as I know) are all south/north agnostic.
Nooo, I just saw that frost is out of stock….
and now I really don’t want to take a ghost or a regular one😭
Has anyone’s order for wooting 80he came in on the first estimated date? Or is it the second
Because mine said it will come on the 9 of feb or the 23 of Feb. do you think I should have my hopes up for the 9th or the 23?
I ordered around 6-5 days ago
that usually indicates a range
so somewhere in between probably
but all that depends on a lot of factors
Is there a garuntee that atleast it will be at my house at Feb 23?
Or do you think it will be extended
i have no way of knowing any of that
Can you try and go off your experience?
idk where you live, where the order shipped from, what the status of various countried on the way is etc
for it it always went fast and easy cause i live in a neighboring country
but your situation might be different for a number of factors
for example there has been a number of strikes in germany affecting dhl
in the past week
just keep a lookout on the tracking link
Can you give more context?
did eu orders push forward?
my order said april but it now updated to february
and my batch changed
yea same for me
döner.
if in my country
If you use DHL, it is usually 7 days late from the latest estimate. If you use UPS, it is usually 1 week earlier from the latest date. It depends on what shipping method is used.
I’m actually too excited for this KB
döneer
just spent my life savings on the 80he feeling good👍
Is the overall shape different from a regular mechanical switch? So I shouldn't worry about interference right?
Oh wow thanks
When I get the option to choose my carrier I’ll defeinetly keep that in mind
Hello, anyone knows what happened to the white zinc case? Why I can't buy it online
What about canada
Monopoly money people get it from netherlands
Asking for a friend
He is happy wooting accepts monopoly money
Ty
Mine came before the estimated date
I paid for expedited shipping hopefully it comes this week
Are you in the USA 🇺🇸
I regret not doing so because I heard some people waited 2 months for there’s to come
Nah ordered in Germany and it was supposed to arrive sometime in December but i got it on 29th nov
free shipping
🤔
Interesting
I’ve been looking for the best keyboard lately and I’m thinking this is the one and I did a lot of binge watching and heard a lot of great things about wooting. Is this true? Is this the best keyboard in terms of gaming performance and kicking out budget looks and feel
Or is there anything better? Because I want to have the best performance keyboard even if it’s pricy cuz I have no budget
looks and feel is personal, gaming wise its the best
Should get a tiger lite gaming w/ venom or a wooting 80he
can you buy new cases/cap for the keyboard if you didn't get it custom build?
Depends, both performance are fairly similar but you get good service/warranty with 80he
What switches are compatible with the 80he?
There are many compatible switches, jade pros, geon raw he, ttc magnetos are the most popular options
Most with north magnet polarity and that are ks20 like
I want a linear switch with 60g activation or whatever and as quiet as possible. What would you recommend?
I was gonna do lekkar 60 v2 but is there a better one
Lekker
There are better ones that have less stem wobble but they arent quiet at all
your only option is l60 v2 then
Tbh I like how lekkers sound
Bet thx
I hate how they feel and sound 
Are the stock keycaps good
Yes
if i were to not consider warrenty, what would be your opinion then?
Good software for nearly 10yrs?
I was thinking I just get stock everything exept for the metal case

They are the same but you get 4 years warranty with wooting
instead of 1 day warranty of venom
Still wooting. Because you don't know how long will Geon support venom, but wooting still includes wooting one for their v5 software
Which is like close to 10 years old
So l60 v2 and stock keycaps
Yea
Any changes you would make?
I would get different switches but you said you want as quiet as possible so just get L60 v2, theyre good enough
Theyre not very quiet but quieter than other options
I im looking for THE best prebuilt gaming keyboard (unlimited budget). Might change out switches and keycaps but thats about it. Am i correct in assuming that the 80he is that? Cuz idk anything about keyboards
so the extra is more for the warrenty? for me (case and pcb) the tiger lite gaming is 85 usd and the wooting is 165 usd
You need switches and keycaps too for venom
and so do the wooting, the 165 is the case and pcb of the wooting 80he
sorry i didn't clarify
Yea just get 80he prebuilt, if you wont like anything you can change it in future. Its fully hotswappable
Actually keyboard would be 10yr this year
That keyboard is a grandpa
So this year we will see 10th aniversary of wooting event
Theyre very similar, both have equal performance
Venom doesnt have rgb, gamepad support, dks
Wooting doesnt have switch selector and 0.1 rapid trigger YET, but they are adding both of them in future firmware update.
and there is warranty/product support. You are getting 4 years warranty and god knows how long they will support 80he, maybe like 10 years ?
With venom you basically have no warranty and we dont know how long it will be supported by geon
Hopefully, woot numpad!
Maybe in future wooting will also have deadzone adjustment and 0.04 rapid trigger, but we dont know about that yet
That will require more stable switches
It's fine. I think by then most chinese board will have 0.001mm rapid trigger
Simon can pull of 0.0004mm
Surely
Im waiting for switch selector and 0.1 rt
And 128k polling 
I'm waiting for force feedback keyboard, you can steal this idea wooting
💀
just get a sim at that point
Hello, I ordered an 80HE + wristrest on the 28th with expedited shipping, but it says that my order is a preorder? how does that work if what i got is supposed to already be in stock? Im not in a rush but i cant find an estimated delivery date and i kinda just want to know when i can expect it to arrive.
Because it wasn't in stock at the time of purchase?
Access and edit your orders, connect your discord, and manage your Wooting account.
website lied to me when it comes to estimated delivery date. I want to order zinc alloy case, it switched from april to may lol
When a delay occurs, we have to adjust the estimate.
Pause there was a delay?
christmas then CNY, back to back PHs
bro. 5 days into this keyboard. i love this keyboard so much. i even customized it too so its even better
It just keeps on getting better
Thought I was good
Then I installed a CF plate
i got the gt-80 case recently tape modded, foam, and the Gateron Jade Maxes
they feel nice to game, and type
also sound really nice too
I have the magnetos coming in
They are type of switch?
Case wise, im stuck lol
Yes they are amazing
But apparently the ttc magneto poms are a cut above the rest
Just pricing is ridic
I only got them because the guy who recommended me the CF plate gives good recommendations
After I trusted him for the CF plate he recommended these
Naw lol Im just going for stability
they look nice
u should do a sound test when u get em
Oh no, im bad for your wallet
I didn't receive a letter confirming my address, so I don't know when I can expect to receive the keyboard😢
Could someone help me place my order on hold? since i cant do it myself.
if you can't do it yourself in the hub it might already be too late
Probably around the date you already shared 😄
Ive just placed the order 10 minutes ago
Could you send me a message in pm?
I can't do anything for you Im sorry. you can contact our CS team through here https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
Heya! Since you kind of here right now, Raquel! #🕒│waiting_room message
Thank you. My friend received the address confirmation letter, but I didn't.
nani
not even a week of having a wooting and my tab already makes a weird sound
Can you make a video of that? I would love to hear that.
it's very faint, probably won't hear it on video taken by my shit phone
I am unaware are there stablizers under tab?
yeah, i even took the keycap off to make sure there's nothing under it
sucks if I have to replace a switch 6 days in of having a keyboard
Like is it just making a noise or also behaving weird?
Maybe lube might fix that but I have no clue... I have not received mine yet 😦
just a noise
the keycap/switch is making a normal sound like any other key but there's also an additional faint noise
like a spring?
bag lube springs or just ignore
I’ve just ordered my 80he first ever gaming keyboard
can i ask about keyboard here ?
(yes i have 80he)
Sure?
should i just re install it ?
What’s better overall keyboard 60he or 80he
Wooting 2HE
Wooting One
Looks like this chat is for kids I’m asking a question and getting silly answers back
😂😂
The answer is preference, and I shared mine 🤷
Wooting UwU
Wooting 60tmr
The Lazar 80HE
Hello, If I order in NL, can Wooting also send the package via PostNL instead of DHL. I dont like DHL delivery guys where I live.
The shipping options available are the ones presented at checkout
Ok, Thanks Mark, DHL it wil be.
so close but yet so far
is that zinc or normal?
where did you buy the frost edition?
Hi 👋
@lapis spear doing gods work with those tweets recently, mad respect
On our website?
is that true, that i will have more problems with the plastic case in compare to the zinc case?
like durability
So I frequently change profiles depending on which games I'm playing. Thus I'm switching profiles quite often. Today my Modtap disappeared from some of my profiles after switching? And an other time couple Months ago some profiles "merged" while switching. Is this a known issue?
space area is more "woobly" and you can replace case anytime - either aim one80, gt-80 or zinc alloy directly from wooting
but it's not like it's not going to surive 5 years at least lol
but whats about temperature
It's a keyboard case. Do you often have issues where other ones melt or break on you? Cause that sounds like a you thing.
Dude lives in front of a steel furnace
like nothing? it's warm on the bottom but nothing serious
and only if you game a lot
Abs melts at 190C
With some warping at 170
I want to use the keyboard for 10-12 hours a day, and I have a lot of strength in my fingers, haha.
Plastic somehow sounds cheap, like it would break quickly, if you know what I mean.
Are you planning to hammer it?
The keyboard has a 4 year warranty (excluding LEDs)
Expect it to last that long at least
I use it for 10-12 hours a day, no problems so far
I spilled water 3 times over it already, still works
But do you have the plastic?
yep
Don’t see how you could break the plastic…
Even if you use the zinc version, if you need that much strength you gonna break the switches first
Have to wait until 10-26 February 🥲
the only thing I dislike about plastic is the fact it's a bit transparent
but some people like it i.e. my gf
don't stress about plastic too much, it's fine
so you love it cause it gives you gf+ points
yes, she said it looks & sounds better than my previous keyboards
Appreciate it!
Good to see its gf approved
not really hammering but pressing harder than usual
ok thank you
Mine says 10-24
And I got black plastic the latest
I got. 80 he in ghost with iso keycaps blank
ooooh
?
I didn’t see that ghost is now later then black
Okey , what Layout do you got ?
Also weren’t we meant to get an update for the 80he when they landed in LA
the normal one idk
Ah Maybe that , I got ISO , like german Layout
My One is in batch dolfjin 4 , from which batch comes yours?
Whale 0
Okey , I will just wait , and Check on Updates .
Got the same thing too,… finally after so long
You already chose
i def paid that $8 for faster shipping
how long does it take to update this one ?
why is it so beautiful?
Frost out of stock😭😭
@nova nexus can you See when the batch Dolfjin 4 arrives in the Warehouse ? I can only See early February ?
(Please don't ping staff)
frost case best case
Ohh when I wanted standard or faster shipping? I thought it mean like it would give me an option to choose between ups or fed ex
Idk it just told me to confirm my adress via email
I ordered it 9 days ago and I got the email around 9:13
i only got order confirmation
Check ur email
They posted the update in #📦│batch_updates when it got to LA. They’d been at LA for a while for processing and now they’re at the wooting warehouse
And it will give you a link to pres wooting hub and you can confirm it email
Anyone can Correct me if I’m wrong tho
jsut did
i only confirmed in email when icreated account
Ah mkay
I wonder if they give you an option to choose between fed ex or ups or etc or is that already chosen when u choose for faster or standard shipping
i had only dhl normal
what is better for transport? zinc or pcr? i need it to take to plane
Plastic is lighter.
Thx for telling me
someone has a video about those dual abs/pbt keycaps`? looks ugly or amazing depoending ...
found one
MW Hash line by大大大秀
Let‘s enjoy it together.
Home page🔗 More stock is waiting for you.
#keyboard #keyboards #mechkb #keycap #keycaps#keycapdesign #discount #design #epbt #gmk #setup
#battlestation #keyset #keysets #keycapset #keycapsets#render #tgr #programmer #mechanical #gaming#kbwarriors #gamer #gamerlife #mw#eva
140
been 2 weeks and i still dont have any reply to my email from wooting
thats normal
so will there ever be support for per-game profiles? :/
Always have?
If you mean ones that auto-swap when a game is loaded, you'll need an app running - something we do not offer (yet)
There is automatic swapping between profiles based on running game?
And you're still limited to the four slots on the keyboard in any case.
I mean 4 games is better than no games... but with an app running wouldnt it be possible to load a profile onto the keyboard itself even if it wasn't permanently stored on the keyboard, kind of like a on-the-fly remap of keys
I can't seem to find decent settings for my wooting 80he guys, what's the best as a starting point ?
tried so many settings but i keep taking back my old razer blackwidow elite of 7 yrs old
xD
I play only apex legends but idk everything feels off to me what i set in wootility
Blackwidow Elite Yellow switches
what did you set
Just ordered 80he, cant wait 🎉
so the yellows are 1.2mm
thats a start
and its prob best you first set all to 1.2
then if that feels the same you start adjusting individual keys
you basically tried to jump into ice cold water
oh and yeah turn RT off
first we have to find a baseline that feels close to your old kb
Everything feels so sensitive and odd to me haha
exactly
i'll go with 1.2 as a base
so first try to go 1.2 on all keys without any RT anywhere to get a feel for the switches and keyboard
Yeah
then you slowly adjust wasd for example to first just 0.8 or smth
Does anyone have a pic of a raw zinc + white keycap + black wrist rest 80HE on a wooden desk? Long shot, I know lol
so not too much lower but slow and steady
and then after that feels good you slowly test RT and such
Like this, and RT off. I use Tachyon mode + 8khz is that ok as a base?
tachyon on/off feels only slightly different
8khz is smth you wont even notice
so they can just be whatever
alright, thanks for the tip tony. I'll give it a shot
depending on what switches you got with your 80he it might still feel a bit off due to the slightly longer travel
razer yellow is 3.5mm total travel
our lekkers are 4mm
how will tariffs affect the price of wooting keyboard
i have gateron jade pro's on the way in 2 weeks i think
those will feel closer to razer yellow
might not feel the same for force
I guess it's something i gotta get used to
as the yellows are 70cN end force i think
60cN i believe
yeah, i have gen1 yellow's on this keyboard it's really old
jade's are 35 - 50 i believe
yes
hard to say how to approximate the spring force
most he springs are narrower in start/end
hey can someone tell me what the performance difference between the 60 he and 80 he is and which one all time better
anyway i hope you can enjoy your 80he slowly and then ease into the new territories
😄 yeah, thanks
they both realistically perform the same
8khz the 80he has is an eventuallity kind of advantage that you dont actively gain but that could potentially under the right circumstances and with some luck give you the edge at 1 point in time
wow ok thank you
this goes for all 8khz keyboards btw
they can have a lower latency but its so small it wont realistically be the game decider
would it be too late to change the black version to the ghost version if you’re na whale?
does this mean it will ship? i never got the option to confirm but I already payed and stuff.
this is the new whale na batch btw
April💀💀💀💀
But if I order module with the black zinc case in arrives 05 February something ain’t right here
Well ones in stock and one isn't
that makes 0 sense tho
The prebuilts use different stock
it not the prebuilt im talking about
exactly but why when i wanna order the zinc case alone its first in april
whats the exact meaning of this
does that mean its still not confirmed ?
like not ready
Its going to be packed to get shipped soon
so its confirmed ?
Yes
80he
what switch ?
Ahh okay got it. I couldn't find that page with the estimated delivery previously and i couldve sworn i made the order while things were in stock but guess i thought wrong. Thank you for this. Sorry if it was a silly question.
The page? It's on the checkout at every step 🙂
what batch
can i cancel my preorder i want to buy the module instead
hands?
If it hasn't go to be packed and shipped yet, yes. Vis the hub.
Any semi transparent grey keycaps that matches the ghost version of the case?
does the wooting 80he module come with stablizers?
It does
how are they?
They‘re fine
I’ve heard they aren’t great
Solution to my GT-80 light bleed issues #🌟│wooting80he message
2mm thick foam https://www.amazon.com/dp/B0D7412KTJ
aww shieet my 80he order changed from mid to late feb 😠
There was light bleed?
Are you having issues with connecting the keyboard?
Not quite should how to read that sentence tbh
Sorry
My keyboard lights are only on for the E and R keys and it isn’t connecting despite my usb being fine I was using the keyboard for months and tried updating it now it won’t connect
Never mind I fixed it
Niceee
Ahhhh good to know
Got some foam coming in a package so I probably use that to fix the issue if I run into it.
Could oyu guys recommend me a wristrest other than the wooting one for the 80he?
I using a Glorious one that I had laying around
I like the hyper x memory foam one on Amazon
Any thoughts on the Sikakeyb Castle HM80 vs the Wooting 80HE? For the castle, I would still swap out the switches and keycaps, the switches being Geon Raws
neither is a bad buy
its up to you based on ur preference
tho buying raws feels like just wasting money if ur going for the former
I've been waiting 4 and a half months for this keyboard
I am sooo happy rn
This is all I ever wanted was this keyboard just because of how it sounded
this keyboard is the best sounding keyboard I have ever heard
note that i cant gaurantee their software works or updates long term
green
My keyboard doesnt turn on
🤷♂️
coming in week or two very exciting :D
where do i see that
replug
You cant use v4 on 80he
, try other port
I do it
Support send this i do it
Error
And send email 1 month ago
No response
guys i contacted support about a month ago about my 80he that stopped working for no reason and still no reply what should i do? 😭
Recontact them for a follow up, or make sure you didn’t miss an email and archive it or sum?
Most id suggest you to do is to reply to your original support ticket, the team still has a lot of support requests they’re going through but trust that you aren’t being ignored. Unideal for both sides but they are working hard to improve 
Can I get good performance if I use a combination of Wooting 80he switch and Raptor switch?
ordered my wooting 80HE today, that’s all. just thought i’d share as i’m very happy
dont get raptors, theyre outdated
Gateron Jade Switch is good?
jade pros
combination or change switch
same problem, been like this for a week since i've got the keyboard
can somebody help
well, repluging works but only for a certain period of time, after few hours same thing happens again
changing brightness also might help, and turning tachyon mode off and on as well, but it just frustrating paying such a price for a keyboard and having this defect
does anyone know if the Zinc variant of the keyboard will be available in the shop earlier? The regular variant was showing "end of February" for weeks, but now it says "beginning of February."?
If that's what it says, then that is what we expect.
When I ordered my 80he it said early February to the uk now it’s saying Late February any ideas ?
As I’d like to know 👍🏼
u got hit with “our estimation is not estimating”
But when u go on website it still says early feb so if you know it’s late February why ain’t it been changed
Sounds like a few people have same issues
EU-Dolfijn-4
Do u understand
i ordered mine and it arrived within 3 days to the UK
Not really relevant, because your orders are probably different.
I’m having the exact same problem. I’m also nervous that it says late feb but also says it’s still in preproduction
Go to wooting hub
did you order the zinc or normal?
and than
batch updates
Any idea when EU-Dolfijn-4 will be rdy?
lubing wooting is good?
i just see your order
my account and reward
do you maybe have a picture to show me where i can see
and it says ready to pack but
in the my account section you can sign up for batch updates
i have that on
Normal but it’s still part of EU-Dolfijn-4
where do i go now
Little late to the game. Optimum keycaps ISO is avalible to order? and it has the full keyset to support both 2HE and 80HE?
the last batch update is only for USA ?
like they wont be shipping from us to eu ?
because it says ready to pack for me
Same xd
Yes.
Well... yes to ISO. Obviously no to 80HE/2HE coverage.
It is a 60% keycap set for the 60HE.
Got it. I will be on the waiting bench
For?
New keycaps for 80HE
Just to clarify - The Optimum keycaps are not coming to the 80HE or 2HE. 🙂
Never say never....
Until otherwise announced. 😉
That´s why I will be waiting patiently...
Are you USA
no eu
What exactly did you get
80he
Zinc
ghost
Ok
it says ready to pack
but like the information online the days are going up everyday
if it didnt get packed, the day will go up by one
any idea how long does it take to pack ?
Walvis 1 is your batch
Depends the amount of orders honestly could be a few days
where can i see that ?
0 is zinc
2 is black plastic
If you go to my orders
im so clueless rn because i orderd for the first time
so is mine pre-order
Yeah you just need to wait
It’s probably going to be shipped within the next few days
are they like making the keyboard ?
the shipment likely just arrived to the warehouse from the boat and got sorted.
ooooh
next steps is to pack everything
you too, and no worries totally can be worrying and confusing first time 😄
ye
I was low key confused as hell when I first ordered
Mine is also dolfjin 4 but my last batch is Eu schelp, how can that be? When dolfjin 4 is arriving later ? And it says keycaps are Coming last
is a test switch of the lekker45 v2 included?
what is better lekker or jade switches?
Yes
Yes, I am already aware of that, but they cost much more. Why? What makes them better than the others? 🙄
more expensive doesnt always mean better. in the end its about feel/sound and what you personally enjoy more/willing to pay
Can I get good performance if I lube Wooting 80he?
Many attributes about them are different. Closed vs open bottom, spring weight, travel distance
it comes prelubed, but if you wanted to do it yourself
you could opt to clean and relube it
I think it’s sound and resistance that’s the difference
ty
I’d say get a few jade switches and pick what you like better
youll get great performance from a wooting thats the whole point 😄
ty :))
This layout looks familiar🤔
Madlions again?
nah, FL Esports FL750HE, cheapest board with full jade pros
they just hall-effected their old board from 3 years ago
Even has the light bar area 
the prebuilt comes with different tester switches?
Only comes in smoke black, and 2 cap options
@shrewd cargo can u link
ali link?
Why lightbar then
their latest 65% is pretty well reviewed, so i went digging
🤷♂️
dunno if the 80he was already in development back in 2022
it comes with jade pros, thats cool
Mine is also dolfjin 4 but my last batch is Eu schelp, how can that be? When dolfjin 4 is arriving later ? And it says keycaps are Coming last
The fabled 80he clone
80he Is it too fast to play Valorant 8k?
I so bad use Wooting
so.. anyone who actually waited for the white zinc v2 get it? submitted a service ticket and received no response and seems like there have been no updates on the white zinc v2..
been waiting on my order since march 2024..
guys i ordered a wooting80he last sunday. it says pre-order. how long took it yall until it arrived?
lul
check out shouldve told you. Once there's an estimate, it will show in your hub as well
ah ive found it, ty

Can someone Explain?
you mighve been rescheduled/organized internally based on the batch. Not sure
Your keyboard batch is EU-Dolfijn-4, but the item in your order arriving last at the warehouse is the keycaps that are part of EU-Schelp
It's been 2 months I ordered my keyboard I'm still in Pre-production lmao
Yeah I understand , but how Can that be ? Dolfjin 4 is in Production and EU Schelp arrives tomorrow .
things were basically shut down for the past weeks due to lunar new year in China
Because different products, different batches.
Keycaps are not in the same batch as keyboards.
Yes I know, but how Can the keycaps be the last Item arrives, when the Keyboard is yet in Production , the keycaps should arrive tomorrow , and the Keyboard is in Production, how are the keycaps the last item ?
That is my question
yeah it's okay but when I see the others I have the impression it's progressing lmao is it because I'm in France that it's like that?
I dont think that matters. If you ordered something that still needs to be produced, then no one can get something earlier if they are in the same batch as you. Once the batch arrives in the warehouse in NL then it can get prepped and shipped to yoiu
ok I understand better but it's been 2 months since I ordered and the only email I got was to say that logically I was delivered on February 25 instead of March 15 and when I look at my order it's is always pre proction lmao I will see that soon
Keyboards are en route
Guys is it normal that the wooting pay Page from shopify is thanks for helping
Updated the Hub just now to reflect this
Hmmn? Did you order from our website directly or from the Shop App?
The Website
Guys, what should I do? I ordered the wooting 80He but it doesn't show up in my orders. I ordered it a week or so ago
Add it w/ the Transfer Order button
Any news about EU-Beloega?🥲
I never got a order number for my 80HE I’m sure I put the correct info. I can’t transfer or confirm my order with no information
I’m pretty much in the same boat
It charged my bank and everything
Can everybody interested in a 80he case please use the notify function?
https://ncased.com/products/kb-w80he
This Wooting 80HE casing kit is designed for users who want to upgrade their existing keyboard casing. This kit is specifically for the Wooting 80HE keyboard. This listing acts as a survey to measure interest in the featured product. To assist in bringing this product to fruition, click on Notify Me When Available butt
They write "This listing acts as a survey to measure interest in the featured product. To assist in bringing this product to fruition, click on Notify Me When Available button below to receive notifications."


