#🌟│wooting80he
1 messages · Page 121 of 1
Leaving this here check it and then tell me footing is faster even with 4k polling it’s the fastest kb now
please dont buy another keyboard if you alrady have one just for polling
even the wooting 80he's 8k polling isnt noticable compared to 1k
oh then anything 1k and above is optimal already
must be placebo then
Latency wired: 0.9ms
80HE on beta firmware achieved 0.6ms
cos humans cannot percieve it
Got link for 80he?

Yup like 120hz monitor etc
the site or the rtings?
Test results for 80he?
I wanna mostly use it as a controller too
Computex is live right now and this is our actual first time being present at the event with our booth!
At our booth, you can simply try out the latest and greatest 80HE, but also check-in on the latest cases and test out your keyboard to see how it stacks up against the 80HE. :)
Booth location is in Hall 2, P1320.
✨ Follow our socials! ✨
Disc...
just convert the ms to hz
I had hand surgery and can’t use controllers good with left hand anymore
damn what for?
Thumb tendon self torn,they took one from the two tendons of the pointer finger and connected the torn one
have a smooth recovery
Thank you,recovery is ok but pointer and thumb moving together so if I make moves with joystick can’t easy enough press l1 on controller 😂
0.7ms hmmm
right ? I think it sounds better too !
120/144hz monitor image looks very choppy for me coming from using 240hz (since 2018)
out of curiosity was there a spike in people cancelling the order because of the cs2 changes?
sorry can i just check something
just a hunch
yes brotha ?
did you buy the 80he and the 60he in the same order.?
no brotha. different order
60 he will be shipped first
aight thats good lmao
it aint good... or thats good ? 😨
some guy did it in the same order and had to email wooting
AH BET BET
i mean its common sense right
ya lmao
No human can see the difference above 144hz or even 120hz and above.our eyes can only see 30 fps anyway.in warzone for example even with 240hz monitor that I got I can’t even check all the houses or windows to notice everything
That's not how eyes work. At all.
Awae? Even I can see the difference between 120 and 240 
Imagine that you can see 30 frames but you got 210 frames remaining and the refresh each second you enter an endless loop of trying 😆
You can’t really “see” it sadly
this has to be bait fr
Hi guys I ask support to make some changes in order and invoice at 09.08 , normally how long it’s takes to get answer ?
If I bring you to my pc and set a random refresh rate you won’t even be able to tell how much it is 😂
What cs2 changes?
Yea you, you can can see the difference between even 150hz and 160hz
not the hz discussion again
Of course the Hz discussion 
bro you cant unless its like 3 hs to 300hs please
Those saying I can see 120hz I can see 144hz I can see 240hz are just showing off 😑
So they kick you for using socd?
yes
they can detect that but cant detect a cheater spinnbotting and killing 5ppl with 1 bullet
Back to #⏬│rappy_and_snappy with you.
srry
The problem with fps now is that the companies make profit from cheats selling and they intentionally let em move around
yeah isnt this wooting 80 he chat HAHA
But anyway the only thing you can do is delete the game sadly
Cs2 is dead anyway 😭

can't wait for my first keyboards ever and the wooting 80 he 
We're still at batch 2
If it doesn't fill until it arrives to warehouse, the keyboard will just be in stock
Batch 1 is finished?
Don’t think there will be stock after reviews come in haha

they can order 60he hahah
Just dont want to regret not buying it sooner before it gets delayed by 3 months again..
what did you guys ordered?
I def can. 144 looks choppy af that I’m used to 240hz
white zinc 80he and an uwu 
is zinc the most popular order by so far??
PCR will always be more popular based purely on the lower cost to entry.
Does pcr sound better than zinc?
You decide 🙂
Wondering how the 80HE stock configuration sounds like? Or how the PCR ABS case compares to the Zinc Alloy case? Look no further, because in this video you'll get the answer you need.
⌨️ Wooting 80HE https://wooting.io/wooting-80he
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram ht...
ill check it out! How are the stocks looking? Will there be a batch 3 or it will be globally available after batch 2?
yes there will always be more batches
its not a limited production
Just get it you won’t regret it
Pre-ordered mine in July, November ETA 🤷♂️
Both sounds as good personally, not sure which to grab
yours should be batch 1 which is september-october, you may get yours earlier than anticipated.
I got the plastic one because I think precious metals should be used for other more useful things instead of keyboards 🤣
Was that your actual reason?? lol
For some reason it’s now EU-brug with Nov ETA. Used to be September before the delay thing with the chips
Yeah I mean it’s just a keyboard that I will forget what brand I’m using after a week
Same here
But coming from using Corsair for like 7 years… went to friends house and used his 60he. So I bought 80he right then and there
It’s pretty good out of the box
sorry to hear you guys, if i order now, mines prob will be pushed out further down to december I assume
The checkout will tell you.
depends
LOL YEAH XD
probably not, but maybe
Is 60He wrist rest the same as the 80He wrist rest?
No.
The 80HE wristrest is a different design.
And a different size than the 60%, TKL and 2HE wristrest.
it does make me slightly sad that I'm the second batch, but game is game
ohh i see, could I see a sample of the white zinc keyboard?
Not only is the performance of the 80HE on-point, we also have thought about making some modifications to the board to improve the quality of the sound. And as an extra bonus we are showing our cases so you have a reference how it might look like closer to final.
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twi...
keep in mind these are not finalized samples
PCR Ghost edition is pretty cool also, will the zinc receive ghost edition?
Transparent metal?

True but we will get over it in the meantime and be very happy once it arrives
ohh not possible, ignore my ignorance lol
I'm planning on getting a new mouse as well
Different from my current
My own mouse is 101g

yes 🙂🙂
Im sure wooting can make it possible! wooting can do anything which I learned
Is zinc alloy prone to getting corrosion overtime?
what ever pronin says below :)
top one is zamak (which is a zinc aluminum alloy), that amount of white oxidation is to be expected under bad circumstances etc
bad circumstances = high humidty, possibly salty air etc
but the 80he also is clear coated in the raw variant
Raw also has a finish added.
so you would first need to wear that and then oxidation could begin to start
^
presumably you have a nice 2 decades with your board until you should start worrying about it
80he has screw in stabs right?
Yep
thx!
while we are on that, "zinc pest" is a term that often comes up in relation to that, but zinc pest specifically is caused by lead content in the metal, which is basically not a thing anymore
Does that mean zinc will last about 200 years?
now I know this comes as a shock, but zinc is actually used as a plating material to prevent fatal oxidation
aka, yes
Why is my shopping cart not displaying after the last step
Aluminum if it’s not anodised sucks as a metal,or powder paint but it thickens enough
Raw case means you can paint it anodise it or whatever else
Witch I’ll do in time or when I get it hehe 😏
a bit of high velocity sand can make it raw raw though
🦁
it would be super cool if there were ghost key caps
if i cancel my order to change cases would i be pushed back on production and delivery time
you could buy them 3rd party
no
right now no
assuming
probably but id be curious if you could find ones that match
i have a few
asimov is one of them
is it a module?
no i ordered ghost but i wanna change to full black
wut why?
hmm I got ghost cause I think it's cool and I'll probably never use rgb
probably not btw
it should be same batch
but email them and they will confirm with u
ye alr
careful with them case swaps. Good to check if they have stock of the case in your batch first
i acc didnt pay with my card so cancelling and getting refunded might be stress
cause id have to let my sibling re order on their card
asimov
i think a few people here have strong feeling about these
you have a link?
pbtfans xray
holy fuck
they are so matte while so transparent
actually impressive
3 reasons I won't be modding my 80HE:
- Too expensive
- Too expensive
- Too expensive
these are pretty nice
it is and ive never even heard of that brand
Nothing wrong being a purist. Just don’t dip your toes into the #🔧│keyboard_modding channel. Once you’ve seen the endless possibilities the mod demon will never let go 😈
just waiting for a sale 
good luck
maybe once they actually have boards in stock 
This is the wrong brand to wait for a sale. Wooting produce products after orders. You will have to wait for them to be in so low demand that they need to sell out a dead stock 😅. Just save up every month to buy what you want
I already got an 80HE coming. I probably wouldn't get things like keycaps from wooting anyway
You just missed the GMK sales. It ended yesterday
I haven't experienced wooting switches either so it all depends on if I'm content with the stock experience
I see that you’re one of the blue brothers of faith.

thoughts on ceramic keycaps
not plastique™️
I see Valve banned Snap Tap from tourneys, I guess that puts Wooting back on top.. I suppose Rappy Snappy would still be allowed?
if i changed my order rn would i still be in eu brug
Depends on the change. Email us and we can help figure out what the new projection would be.
IMO. I think the technology and production quality needs to mature a bit more. When you get the same level of quality of Ceramic like a good watch case. ( scratch proof and harder than both steel and titanium, only then I will invest in such keycaps)
that makes sense
Hello, I’ve sent an email to social@wooting.io 6days ago and still haven’t received a response. I was looking to change my order
I don’t worry, just have some patience. I waited 2 weeks for my case
Are y'all changing out ur 80s or are you guys getting. The stock prebuilt
Just curious now
I plan on changing it a lot, but the stock version seems great for most people, keyboard modding might be a better thread though(at least for getting the people that will change it )
stock mostly other than keycaps
if i could swap the silicon i would though
back in EU-Beloega 
bro is getting baited
was brug at the start, was beloega last week, yesterday brug -> batch update -> beloega today REEEEEE
Dont worry I bet your keyboard will arive before end of october 2025 
I am stuck in the second batch myself 
Do we gotta do the order fulfillment when its in the warehouse? Or will it do it for us
Yes.
It'll automatically ship after a week if you do not confirm
It’s the same keyboard, you’re choosing between getting your hands dirty or letting the expert at the factory build your keyboard.
Just enjoy the factory experience and mod it to your liking if you don’t like the stock feels or sound. What ever you do, it will be more expensive than stock. So unless you’re a keyboard connoisseur with clear vision of what you want. Or you’re a guy that enjoys building keyboard rather than using them. Going stock is a OK 👌
how many times did you say that today?
Felt like it was time to finally get a new mouse before getting my 80HE. Been using mine for four years now.
I grabbed the G502 X
How much custum duty I have to pay to buy wooting 60he+ in Pune , Maharashtra, india if I buy from official website or do you have any other websites to avoid so much custum duty plzzz help
ask indian customs
Horrible
Is am asking someone who have it in india
one of the rare people who don't want the 200€ 50 gram mice from china
18 % GST for electronics. but for india this may not be followed so you can be charged more etc
Any other place to avoid it
lmao
an indian reseller -- which doesn't exist I think
Some one recomend me mx2games is it good
Bribe customs
Move to the EU? Or the US? 😄
the amount of people trynna avoid taxes is crazy
Why? Seen tons of good reviews on it
Horrible idea 
well they also have governments that try to bleed their already poor people dry
No spaceship sound = bad
In india we have to pay 100 dollars on 200 dollars keybord not like 1 or 2 persent in other country
Do you want him move from third world country to another third world country?
correction, we pay 0% in other countries 
nevertheless your options are:
- take the 20-100% tax, depending on your luck
- find a reseller that's willing to help you evade tax
Third bribe customs

sixth rule the world
i dont really see how it can become 100 dollar in taxes
corrupt government
brazil has almost 100% in taxes/fees ontop of the import
turkey had a flat fee of 250 eur for items below 150eur
lol
a lot of this is corruption and then import officers being able to charge what they want/feel like
sounds so surreal
in the case of turkey it was just how their government website listed it
and now turkey lowered the import threshold even further afaik
I believe so? It's like a weird hybrid between painting and plating?
hello I have a little question which may be stupid is all the technologies that were on the wooting 60he+ also on the wooting 80he
Yes.
The 80HE is 60HE and then some.
OK thanks
Possibly. Email us asking about it.
Ty👏
Oh, I didn't see that. I made a change to my order and I think it moved the delivery date. 
will wooting do like wooting 60he+ a list with other case
wooting will make a case like that of the 60he+ in aluminum
There's no standard for TKL. No cases exist except ours that fit the 80HE
ok thanks for the information
when will i receive my 80he? i ordered it for about 3 weeks ago
can check here https://hub.wooting.io/auth/login
Access and edit your orders, connect your discord, and manage your Wooting account.
you need to create an account using the email used to place the order if you havent done so
thanx it says late november 😞
this was communicated on the order page 👍
HOWW
ordered in may but im getting my in dec
i think it depends on ur region?
sweden
It do be a pre-order. Pre-orders are subject to intricacies of global logistics.
Just hope this time a ship doesn’t Tokyo Drift itself into the side of the Suez Canal like when the 60HE was coming out.
I just order hour ago 80he it says for me aswell it will be available late september and arriving early november
i think for me its the shipping that makes it take til dec
Probably an estimate based on previous customs wait times? Mine says shipping mid October arriving late October. And the US usually doesn’t have long customs times.
Sometimes a mousepad from Japan will be stuck in customs for a month 🤷♂️
The estimates are based on the warehouse stocking estimate date, a healthy buffer for packing an entire batch of orders all at once - and however long the courier takes to deliver to your destination on average.
different batch, earlier batch
@buoyant solstice why i can't pay with PayPal 😭
doesnt paypal take cuts?
a significant portion for business iirc
Please don't ping staff randomly 
Okay sorry

has anyone suggested making a big silicone ring that'd fit the indent/cutout alongside the edge of the 80he yet?
I have to ask. Why?
might change the sound, help with vibrations, but most importantly for me personally it'd make the sides of the board flush https://wooting-website.ams3.cdn.digitaloceanspaces.com/612ca8920bc3a648125ffac3/65d8afd0f7dc1d2c98193252_Side_Rimlit_80HE-p-1080.png
It's already gasket mounted 
to clarify
you want to gummy o ring mount a gasket mounted keyboard?
They want to put a ring around the outside, in the indent lines
yeah
ooo
just another cheap way to further customize the board I guess. I don't think a silicone piece like that would be expensive and you could go for a panda look for example, white 80HE with a black ring, or vice versa
what if you just cut the lines off
plus they clearly already have silicone supplier with the feet and the wrist rest
would be cool if somebody could forward the idea to some wooting staff so they can think about it
ah okay ill make a post
73 days until november
aight, made the post
I really hope this keyboard is worth every penny XD
fr, i never waited this long
It'd be cool if you could do it with wood, like an old PT cruiser
Guys
battle of the century, i wanna send a r/wootingkb link of aliens vs mech theme. where can I send it? i let them know to send ij wootstation because they are so cool :O
I placed an order for a 60HE+ and some other things today, how can I add a wristwrest to it the fastest?
Email support? or is there a quicker way since I put expedited shipping
if i want to add a 80he wrist rest right now with my order of 80he(i already have a order placed) will i still be getting 10% discount on the wrist rest?
what do u need the wrist wrest for ? just curious
i have never own one, does it help with gaming ? more comfortable ?
I’ve used one mostly for higher up feet which can feel better depending on what material is under your keeb
If it’s completely flat then no real need for one
Could also probably help if you have wrist pain
ahh... dont know if i need one ._.
It’s all placebo. If you focus hard enough. This keyboard will be your endgame keyboard. If you’re looking at the next best thing. Nothing will ever satisfy your hunger
If you haven’t needed one so far, you probably don’t really need one
roll a coin :)
it will know if you need one
never own one LOL
Why ask for one now? 🤣
🙏
first time purchasing a keyboard ? and first time creating my PC set up
hence wondering if I need it....
If you have a comfy pad underneath your KB you should be all set. I didn’t have one for a bit so I just got a wrist rest which helped
Heya, just bit the bulelt and ordered
you can try emulating it
i think my mousepad should be soft enough haha
The big question is, do you have money to spend one ☝️😅
I have a dual artisan pad set up so it’s pretty good, so as long as you have a pad and it feels nice then you should be good
like putting something ? haha
ya
yeah i do haha been saving
If your desk is biting into your wrist with its edge (what happened with mine) then diff story
something similar to silicon
Then go all in and don’t look back
i cant just go all in, if i dont need it its just gonna lay there collecting dust
I got all the stuff. If I don’t like it. I will pass it on to others.
hence all the questions... but I think i will hold on for now
wait which colour?
black ? i am having an all black set up
if you dont want it
ill buy it off you
same price
but we are in different countries my brotha
🇸🇬
ye
all this time and i didnt know 
The world is a small place
damnn u a wooting 80 he founder nice
right
do u have any wrist rests before ?
Did something happen with the 80HE preoders? Mine was in NA-Bridge (Mid November), but I just logged in and now it says I'm in NA-Beluge (Mid December).
Edit: Nevermind! Just read the latest in #📦│batch_updates . It's an error! Phew!
never needed one
but ngl regret not getting one to try
huhhhhhhh why
idk felt like it
why arent there any reviews of the wooting 80he yet?
because no one has it yet ? LOL
I currently have one and I have a solid thick piece of wood as a desk so having something a bit softer to have my wrist on feels better than a hard surface
because the 80he isnt out yet
cuz its out early september
Moreso preference based, as is the entire keyboard industry tbf
oh... I am using the secretlab magnus pro
so i am not sure man LOL ......
Is that the magnetic one 
yes bro
that might become a problem
with the keyboard you mean ?
I've heard a few people had issues with the magnets and HE keyboards
the worst are those magnetic desk integrated into chairs
where youre supposed to stick magnets on peripherals so they stay on it
Any chance you're the one to add a wrist wrest to an order? LOL
no our email does that. social@wooting.io
yeah, just increase distance (more layers) if it interferes in the end
Yeah I created a support ticket, but I have a feeling the order may leave the warehouse prior
how do i know if it interferes with my he keyboards
never own a he keyboard before hence the question
I think there were reports of random triggering of keys with the magnus pro. So if you don't touch your keyboard and it still types, that might be it
ah okayt
i will be sure to put all my mousepad
and stuff before my keyboard arrives. and of course my PC
thank you for the heads up..
Order moved to ready to pack so I doubt it is going to happen lol
I placed order today lololl
Why get a wrist wrest ? Are your desks at weird heights?
I literally had wrist surgery and never felt the need.
No judgement just wondering
I’ve only felt uncomfortable once at work but I got a standing desk like 2 weeks later and could adjust height
fomo, fear of missing out
tbf it just feels nice haha
My GF has a wrist rest and it just gets in my way half the time.
I develop so I will spend like upwards of 10 hours at points in one sitting primarily typing and it’s never been a concern
Haha I know what fomo is but I’m sure that helps some with the expanding
ya it will probably be the same for me
but yk
who knows
She also has a wrist rest for her mouse which is insane to me
ok wtf
Yeah man
now yeah that is kind of crazy
My mother in law is the same, she is an accountant
Non gamers are insane
She actually plays games tbf, just nothing mechanical
The thought terrifies me
but yeah idk, I think I like the feeling of the softer material under my wrist ngl
rather than my wood desk from ikea
Idk man all of these sound like desk cope issues
nothing wrong with it, just preference
But fair enough
hahah could be, I just like what I like
It’s not my life to police
I just don’t get people who claim they actually need it and can’t get by without
not a necessity by any mean
truly a preference based purchase
anyone who says otherwise is quite insane haha
The 80kg of mass flying at 20mph landing on my wrist suggests otherwise
But who knows
how did that happen
My question exactly but I couldn't ask after assuming lol
Could someone here advise me on how to purchase the Spanish version and have it delivered to the United States?
i was Iooking at this product and wanted to see how the Ied's on it wiII function, I know it says stuff about it in the info on the page but i dont quite get it, Iike is it buttons on the Ied or is it Iike touch based?
maybe im just dumb
aIso how does Ied heIp in activating rappy snappy?
It doesnt, it is just for displaying info
Lets say if rappy snappy is on you can set it to another color or effect
I think the rgb effects will be similar to the 60he so if you want to know how the led effects work you should be able to lookup videos about it on the 60he and they should be similar to the 80
I don't recall any news about new rgb effects but I could be wrong
wootility 5.0 releases with 80he with a bunch of new functionality
there was also the 80he unveiling live stream where some of the rgb effects were shown but it wasn't everything that was shown
new functionality = new rgb effects? 
probably yeah
probably also some custom ways to set up the led bar
its like a status indicator
ye I've seen the led bar have the rapid trigger/actuation indicator
what is the difference between the lekker 45 and lekker 60
one is 45 other is 60
like the activation force or wut
yup
yeah force of springs
yeah for now the v1.5 of the L60
bruh some games are already banning peope for snappy tappy 😦 i was hoping i could use it before they started handing out bans
which one
if you mean games by valve, they are all banned
If I chose the Wooting 80HE module, does it come together or separated with the case?
im not sure lol
yeah aero ik valve has already banned it
was kinda hoping to try it on cs lol
see if it was as broken as people said
XD
It'll come in the same package but not assembled
I see! Thanks
yeah I was about to say to my friend who is in dire need of a new kb (doesnt play fps games, but is looking into wooting vecause of how good they are and their product quality)
i told him to not use SOCD because you will get banned
otherwise i told him he can absolutely try the 60HE+ I have
hes getting the 80HE too
anyone here getting the 80he a programmer?
i'm sure plenty are
anyone get 80he alrd? I need to wait until october
no
me!
no one got their 80HE except for some of the staff for testing purposes
That’s earlier than most people
so fast
He wasn't replying to you?
No one has the 80he yet, except obviously some wooting staff (like irl staff, not discord staff)
hmm im thinking of ordering it too. really keen for the 60% because of the modding but will probs get 80he since need arrow keys. is that same for you?
Yea. I tried programming with a 60% keyboard. Didn’t like it
Yeah
Too large? Yeah I get that. Gotta use a 40% to program.
You also forget stuff like ins
Like, when using bash my paste bind is shift + ins
And also for neovim stuff I have so many diff binds I don’t want to lose on arrows
If I didn’t do programming as a job for so long every day I would have the 60HE rn but that’s the main dealbreaker
i sentence you to uwu morse code programming

I know this feeling. the pain. I do a lot of data computing. giving up the numpad was hard enough. also neovim? how u liking that? I'm using zed atm which seems so much smoother
I use 2HE for programming, 60HE for gaming
ngl kinda wishing the 80he had whitepcb. the white zinc looks so good but it's too price I think
how is the 2he? u never hear much about it anywhere
Case*
The PCB is always black 😄
pcr you mean
I love it! Nothing bad to say, especially compared to the Razer I was using before it
oh well. one can wish 😛
why two keyboards btw? isn't the 2he just the 60% extended?
I need the number pad and arrow keys for programming
yeah but why swap to the 60% for gaming if it's just the same on 2he?
Personal pref. More desk space for mouse
ah right. speaking of which. I recently upgraded from a logitech mouse to the razer viper v3 after like 6 years and the difference is night and day. it's honestly convinced me that a wooting must feel entirely different if thats how different a mouse can feel
just did the opposite lmao
what u mean?
upgraded from a viper mini to a superlight 2
Been using neovim for 3 years, but use VSCode and Visual Studio at my current job as it’s mandated.
I’d love to maybe have a look at Zed, have a lot of respect for the team, but I’ve programmed my own plugins for neovim, and idk if I have a desire to drop all my tooling for it
viper v3 pro was my first choice
is october the new real eta for the keyboard?
yes
I can’t with the viper mini, I literally buy mouses at this point based on my hand size because I use palm grip and my hand is like 8.5”-9” long
Whatever the hub tells you is the "real" estimate.
laaame
nah thats fair enough. my work doest usually require programming, but i do my own automation, so i dont really have a set IDE. a lot of companies are converting to rust, hence why i swapped to Zed, but dont get me wrong, thing is fast and easy to use
Any of the smaller mouses my hand drags on the mousepad and that’s yuck
ok, thanks
I’m a real footsoldier for programming, it’s only recently I’ve done more system architecture, so the keyboard and IDE exp really matters.
Regardless, I’m never escaping vim keybinds now I’ve started
ah i see, i was dissapointed with the dongle ngl, then i just hung off the back of my desk where i cant see it, which made it so much better
ya a real shame
really liked the look of the v3 pro
Why was the it pushed to October?
i know what u mean, ngl, a lot of my local network are gamers, and they keep recommending the gem 80 or some other keyboard. but idk yet. Im waiting to see how the 80 he is when it comes out, hoping they come out with a 65% or 75% next year
doubt they will
system architecture? hmm as in cloud or network?
why? they seem to innovate a lot
there's no value
most people can find something they like between the 80 and the 60
it wouldnt be next year
an additional 3-6 SKUs to keep in stock of an in-betweener layout might not be worth it
there are more important products to push out
not to mention the RnD costs alone
any hints to what those are
cough low profile cough
probably not either
my dreams are crushed and my life is pain RIP
low profiles are just switches than can be bought from a 3rd party
i'd magine a two he refresh is starting to be on the table, depending on how well it sells and how much value there is for such
and a 60he 8khz refresh since people keep asking for it
if you want one you can wait for gateron's new low profile HE
and see if its compatible
a knob is coming iirc
numpad/wootpad 20HE is also highly requested
they are doing R&D on a new type of switch
yeah I think we'll wait a while for the knob unfortunately...
theres a knob?
iirc someone said smt about not needing to buy another keyboard for it
something along the lines of an accessory
we need an official unofficial name so wooting staff can deny its existence while we discuss it like the lekker pros
was a whole arguement on what "Accessory" means
Maybe “knob job”
oh man, id be keen
Lets name it woob
there is no lekker pros
Yes there is no “lekker pros”
"no" lekker pros :)
there is no lekker pros and no "lekker pros" either
wait, are you guys wooting stuff? how do you know this?
It was already leaked officially in the eyejoker video btw
About the upcoming custom wooting switch
link?
yeah its out in 3 days i think, but from what others have said, its very unlikely itll fit which is sad
Er I’m out right now but basically sander leaked it to eyejoker discussing the upcoming custom switch project
you never know
Atleast Silent Lekkers exist
It was the eyejoker visits wooting booth video
dont give me hope man, if it fits, im insta buying the 2he
ah ok, sorry
https://youtu.be/2UjTBVYUnbk this one right?
대만 컴퓨텍스 COMPUTEX 2024
일정 : 2024년 6월 4일(화) - 6월 7일(금)
장소 : TaiNEX(Taipei Nangang Exhibition Center)
#컴퓨텍스 #computex2024 #우팅
🎬타임라인
0:00 인트로
0:17 우팅 부스 방문
1:00 우팅의 미공개 샘플?
1:30 아날로그 테스트 & New 알루미늄 하우징
3:15 우팅 80HE로 발로란트 한 판!
4:34 우팅 CEO CALDER 영접
4:48 첫 번째 질문
8:41 두 번째 질문
9:11 세 번째 질문
10:33 네 번째 질문
11:46 다섯 번째 질문
13:45 여섯 번째 질문
15:13 마무리
16:38 우...
Yeah that one
drakon you staff too? u know a lot
estimated timestamp?
no lmao
It was when they were looking around the booth at the wall of products
aight ill look
Somewhere around there sander discusses the custom wooting switch existing but says no further details beyond that
i hope its not a knob, and more like what the g915 has on its top right
that was smooth as hell
If you know right input to calder, you can type it during live and hes leaks new thing.
calder is the new zuckerberg?
Not yet
Well there are 3 wooting products in work. Wooting x optimum case and keycaps, knob and silent lekkers
Yeah there it is
cant find anything about a new switch in there
oh
above with timestamp
It’s obviously in early stage still but the project definitely exists
Lekker pro was community name anyway
Lekker Pro Max Ultra
lekker m1 max air
With dutch chocolate
yes it dispenses tonys chocolonely if you hold it at the right press depth
im excited for the optimum stuff but im guessing he's going to try and keep it as barebones as possible which would be countereffective for most ppl
oh lawd. why
were working on silent lekkers?
man i should be here more often
learning about all the stuff we work on
its still very clean though, grey with metal accents
The upcoming lekker moist is going to be game changing
good shape
dont have to tell me twice, i built the formd t1 based off his vid
time to get charlie in to promote this
can't believe you would leak that. that's calder's job
I believe we can 100% popularise our new naming scheme

rappy snapp snap tap now bannable? 😮
Please keep 80he channel to relevant talk, such as the leaked lekker moist switch
Yes 
I mean if you don't want your community running away spreading false information maybe release some real information sometimes
about the knob for example
what knob
There are several knobs on this server, yes 
the one calder quite literally clearly talked about in the discord stage stream
All I can say at present is that we're actively working on the Knob project. Once we have something solid, we'll share it with Y'all.
#📦│batch_updates message
When in doubt, check the updates 🙂
welp cant pretend know doesnt exist anymore
pin this
now its confirmed in text
We've literally talked about it before, Tony 😄
maybe we can group the knob under the moist banner
a set of moist extras are in development
i was pretty sure its only calders impromptu stream
moist knob does play well with the zoomer demographic groups
Its only Wednesday and we’re talking about new/ old leaks 😅
I guess anything is better than shipping estimates 😅
hrm i think i'll be able to get moist trending more with some graphics
a moist collection fan?
the sog knob

the moist collection shoud come with special lube called the "moist mix"
wonder how that would work with the hall effect sensors
Honestly most likely will be a bindable button aswell as yk…. A knob that you can use that’ll also be programmable
Wonder how it would be integrated into wootility
im just thinking in in terms of how the pcb would read the input if you just switch it out with a cap
sounds really hard to implement
Oh I see
unless the knob had a magnet at the bottom and went up and down depending on where you turn it
thats the only way i can imagine it being swapable
yep something like that probably, but that kinda makes it imposible to have a freely rotating knob, which makes me sad
it could still work i can imagine a design that would allow you to make a knob actuate a magnet but its probably gonna be a bit costly to manufacture
freely rotating knob should be possible tho
not really
imagine a screw
unless you mean freely rotating as in can do a full 360 and keep spinning even if ur at max
his first description was one
then im not sure
thats what i meant
freely rotating knob sounds great tbh hope the team can make it happen somehow
you could probably make it go negative if it goes one way, positive if it goes another(north/south) and neutral at rest, but I have no clue how feasible it is with inducing a field by just knob rotation and how accurate the sensor is
and rollers are also nice, like on logitech and corsair keyboards, actually like them more than knobs, but they take up more space
3HE better have one of those things
oh like that bar thing
3HE? uwu?
3HE southpaw? but tbh a separate one is better
ambidextrous device 
does a flipped keyboard exist
stack uwu-s instead of numpad?
with enter on the left and wasd on the right
sounds cursed as hell
time to make one
fully flipped would be so weird
but not sure if the sensor works both ways XD
can someone try? 😄
NSFW...
U think wooting will ever make a 40he
ever is a long time
probably 50/50
ye ig
Calder didnt went insane, yet..
on one hand its a completely stupid idea, on the other hand its wooting so idk
Look wooting is like a cult
like a cult?
Honestly I have no clue what he board wooting can make next
it is a cult
also i gotta hand it to wooting how they made the stock 80he sound so incredibly good
like compared the 60he
Because we huy eveything they gave us
?
numpad with macro/extra keys so you can use it as a numpad to go with 80he or as a small gaming keypad if you are REALLY low on mouse space
I was there 
Ye i also was suprised
i was not 
What would I need a he numb pad for, to do taxes faster?? 
if ur real rich ud buy 3 uwu and tape together to form a wootpad
Yes
I could be but wasn't interested
UwU
UwU
UwU
yea same i didnt think much of the uwu at the time

like minecraft crafting table: UwU+UwU+UwU= wootpad
Umm calsock is making monstrosity from 5 uwus
there is already a wootpad on the two he
UwUxodia 
True maybe that's the play for the navbar I won't use put my media controls there 
not the same
@tight cypress so look 4 on sides 1 on bottom. Add powered hub into frame make it thicc and here you go
cool mrbeast a beast video concept would be: "I made a full wooting 75he out of UwU"
who needs media control just alt f4 spotify whenever you need to stop the music
extra bonus is it saves ram
@tight cypress I dare u to do 75% keyboard out of uwus
Nyo 
For 40% I need like 16 of them 
I almost have all pieces of wootxodia, just need my 60 and 80 and ill have UNLIMITED POWER
Atleast you can try
at least he didnt ask for a 2he out for UwU
how much does it cost for 5 uwus and is there a bundle discount or smth?
Oh yeah - buy 5, get 5 bundle 
Heh, Snappy Tappy /Rappy snappy got banned in CS
The wooting and razer rapid trigger keyboards were almost cheating, and now they are literally cheating and being banned in many games. CS2 Bans SOCD, Snap Tap, Rappy Snappy and more.
Intro song by me: https://open.spotify.com/album/0fDuf5XgDJG15Ji2zTEhLA?si=917eab0f40e7489b
Watch my first wooting video: https://youtu.be/UPmTdaKSbkM
Referenced...
When my 80HE arrives I'll have to rely only on my skillset, not bad ;).
Those that paid for Huntsman V3 will split blood now.
Rappy snappy not banned i think, it’s a different thing
also probably banned
Hipyo's wooden case is sick
a
In Hipyos vid he was kicked with Snappy Tappy AND Rappy Snappy for using macros...
especially cz esl and faceit say theyd support it
Hop on over to #⏬│rappy_and_snappy to discuss.
How come my EU199119H-M got pushed back until Oct ??!!
Someone did not pay attention to wooting news
what would be the approx range for mid november
the one in your hub
1 day less folks
I hope they embrace the future
it's a lot less noticable in valorant. Mostly only noticable if you rush shots
kek
true but when i tried i it definetly improved my shots immensly cause i usually play on quite high latency
i think noted is the only one I saw who made a video showing the actual effect in valorant https://youtu.be/rjvkeTBAly0?si=_2KVUN79BOsWHQf4&t=241
Catch me live: https://www.twitch.tv/takenwasnoted
My reddit got stolen join this new one: https://www.reddit.com/r/notedwastaken/
Business Inquiries:
📧 notedinquiries@gmail.com
#valorant #gameplay #highlights #funny #moments
you can see how it cleans up rushed strafe into firing inputs a little in his 2 range examples
but i think his shooting style is also a little less common, so people who don't do his very quick rushed strafe burst combos don't notice it as much
that is true, we must only discuss relevant 80he things, such as the great moist add ons I will be buying for my 80he
new special edition wooting lube "moist mix" included!!!
what dis
community approved names for the leaked wooting projects
You’ll be even more unhappy with the old keyboard when you get the 80he 
kekw
My current keeb has been hot swapped 3 times in 5-6 years and is desperately wanting to retire
morning wooting gang
Morning aero 

as a wise man once said "I want my switches and knobs moist"
moist if TRUE
42 days remaining
“sno | jed (wooting moist lead)”
anyone know if the 80 will need mods done to the stabs?
no but maybe
its usually fine but sometimes the factory lubes the stabs badly or some want it to be more lubed
the jade prelube is good though, no?
if you like it
no but like is it good
Because the 80 is considered the golden era ( perfect layout) 🤣
i am still salty no knob but it is wat it is
Knob was confirmed as a separate project that will work with any keyboard
*any wooting keyboard
It’s going to take some adjustment without a volume knob for me as well 🥲
slap in knob
There is hope after all
the community has chosen the moist collection as the name for the knob and custom switch project
Not Flaretech
hail to our future moist products
What a name
so it is like a screw?
that's our guess yes. Something like swap in the moist knob for the switch
they won't say but us moist believers think that is the likely scenario
i mean mark just confirmed it
wooting 80HE saved if its true
well he confirmed it existing and that it will work with multiple keyboards but not that it's the swap in for a switch or not
the knob saviour we all neded
no no
scroll up abit
where?
yeah that just means it'll work with a bunch of keyboards as we already knew
not necessarily that it's the replaces a specific switch or what
it could be multiple switches etc. Flaretech has issues sometimes with newer stuff so it's not surprising if they don't make it compatible with flaretech
ya makes sense
the tech isn't as good as seems to have issues being as exact
what is important though is that we the 'moist collection' enthusiasts continue to spread the good word of the project
well when calder specifically said where the 'knob' would be located he said a specific portion of the keyboard on the 80he in the stream
ooo
so we still don't really know exactly what that means for it's application if it needs 2 switches or if it needs a certain sensor or what
I love watching y'all squirm, grasping at straws, and clinging onto tiny little pieces of potentially relevant information
Makes me want to send some red herring messages to throw you off track
Or maybe I already did?

mods ban this guy he's being mean to us

the only important thing is that the moist collection naming scheme remains untouched
the moist enthusiasts will not be denied
cant wait for moist lekkers
i understand why the unofficial lekker pros are denied as a name. It lacked character
the moist lekkers will not be denied. It exudes confidence and moistness
BRO LEAKED THEM
Moist.
me when i see the 80he white zinc alloy case
We do know the 2HE remake is coming though
man ive seen at least 9 new huntsman v3 for sale on fb market today
the bans must be hitting hard

give me more leeks algot 
I am fishing 🎣
It’s normal, when the infatuation period is over, you usually throw out the trash
If the moist knob takes up only one switch spot, could we have an all knob keyboard?
uwu knob version
people should have bought wooting instead...
A full moist knob keyboard
you get 0 bloat software and community full of active people which can help you
but with razer you get shitty bloat software which sometimes doesnt even work properly.. for example their mouse lift off distance defaultss when you uninstall razer software, the onboard memory dsoesn't save all settings
wooting had a web based software right?
yes
yes and app version too
0 bloat, also their app is OPEN SOURCE
nice
Its up to you if you want software based or via browser. Also they have onboard memory, so your stuff saves
I will use the web based one
web based is goated fr
Same im using that one atm, and it's good!
whats evryones thoughts on the jade switchs vs the ws dash
jade personally
I'm looking for a new keyboard and i seen these on the web. should i wait for the Wooting 80HE ? any feedback or suggestions would be appreciated
they are the same, the dash is just a recolored as far as i know
Now i dont know if the software has any benefits over browser, maybe someone knows

I suggest you to wait for 80HE
i personally got the ws dash
Or if you want you can get current options, rly comes down to what you do
tomato tomato
but in this case different colour tomatoes
i seen some vids on them and they sounded way diffrent but maybe that was just weird recording
gotcha its really just for gaming
same thing
just recoloured
Then if you don't need or use often the F row, you could go for the 60he
For example i had Corsair K70 and today i got 60+ and it feels nice and good, it will take probably couple days to develop new muscle memory as there is difference between them
But, if you give me option between 60 and 80 id pick 80 as i like keyboard being little bigger
I havent touched keyboard software yet(other than setting rbg color) but for example with mouse software you can get diferent settings per game, not sure how you would handle that with a browser(at least without keeping it perma open)
i really do wish the 80he came with a knob
would be nice but don't discard a possible knob in the future
Just get knobs then https://youtu.be/Q6-QRSpmFAc?si=i1JJ2uqJ-Qnq9Brj
In this video I showcase some of my favorite desk gadgets that I use every day in my home office.
The first 500 to use this link will get a 1 month free trial of Skillshare https://skl.sh/workfromhype02241
(Affiliate) Links to Products in this Video (Thanks for your support.)
GMMK Numpad: https://amzn.to/3T1cTM0
Keychron Keyboard: https://amzn...
A moist knob to be specific
NSFW.
oh dang i just saw the knob project, can't wait
i'm using stream deck already
but a knob on keyboard would be handy
So why do you need more knobs 😅
never enough knobs
See I told you the knob project just needs branding and a good name to truly spread the word
Hail to our moist future
What are the uses for the knobs except for volume control
To proof you are mentally insane
Whatever you set your mind to! Side scrolling, window swapping, impractical mouse wheel replacement, special chanel volume control(increase game/ voice coms or the other way) and just good old knob fiddling
🤣
People likes to have buttons all over the place and knobs like if it was an airplane cockpit
I don't blame them
I understand people with sim/cockpit. People with a few cheap knobs on a keyboard is just uncultured 
You tell me with two joysticks, a throttle and pedals and I still envy some folks with more
And I'm getting the HE80 with the idea to use it as a analog axis mapped on wasd cluster
Sounds like you’ve got a plan
Yeah, the Wooting has an emulation of x360 controller
And I intent to map the axis for forward and backward and l/r strafe for SC
That's what I had in mind, does it work well like a joystick?
I still havent bought any keycaps for the 80he
thinking of maybe getting some in stock gmks
or some other nice set if i found something in stock
gmk samurai or pbtfans ronin wud be nice
I just bought one and I have to wait till mid november
So many choices, sadly you can’t catch them all 😅
November is still better then December

Got to look at the bright side 








