More of a question about gamma. I only have weapons, terrain, and texture mods currently added. None of those should be affecting the population of stalkers as far as I am aware. ZCP is set to .85 and mutants are at .35 currently. I do know that after a few days that more stalkers will populate the zone, but is the inital count that appears during a new game supposed to be low? I only have around 397 when starting a game. I remember it was usually around 700-850+ with similar settings in the past.
#🔨modded-gamma-support
1 messages · Page 346 of 1
Can I get assistance from anyone on this error message? Fresh install and update on both anomaly and GAMMA
!norottingmeat
@fluid fern To disable the rotting meat feature:
- Disable the mod
ilrathCXV's Meat Spoiling Timer in Tooltips - Find the mod
349- Hideout Furniture Expansion - Maid & HarukaSaiin MO2 - Right click -> Reinstall, make sure "Optional - Meat Spoiling Addon" is off
- Click "Install", then choose "Replace" when asked
Thanks
try only the first option first
idk if im adding reshade wrong but i cant get the reshade menue open in game any suggestions?
go to #╟🎑reshades and check pins
pins have guide for installation and common issues
New issue. Pardon.
hey, i downloaded the rwap weapons modpack but when i start gamma i get the error memory acces violation issue, any suggestions?
!aoe // no
@tidal palm
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
Not sure if this is a bug or not, but whenever I start a new game and go outside, my character slowly starts to lose health and when I try to heal, the health bar doesn’t go up and the health slowly goes down until I die. I’m not bleeding and I don’t have any radiation
Anyone on that can read the logs and tell me whats going on so that I can fix it, I cant even load an make a new character.
This is the error I get
Me either…
!stealth
@dusk monolith
- Download the mod archive: https://www.moddb.com/addons/start/207498
Do not extract it
- In Mod Organizer, go to
File->Install Mod...(or pressCtrl+M) - Select the downloaded Stealth_2.31 archive
- Tick
Stealth_2.31, then pressOk - Find the newly installed mod at the end of your modlist. Enable it
Thank you this worked
!dx9
@nocturne gulch
If you want to play with DX8 or DX9, follow this guide: #╭📖faq message
Can anyone help me figure out how to disable the eye effect?
As well as this, happens every time I enter Outskirts
========================================
CRASH at 17:38:34 (exit code: )
[Log empty -- crash happened before engine could write to disk]
This usually means a DLL failed to load or a very early engine crash.
--- Windows Event Log ---
Time : 04/21/2026 17:38:32
Process : AnomalyDX11AVX.exe
Crashed in : AnomalyDX11AVX.exe
Module path : C:\Anomaly\bin\AnomalyDX11AVX.exe
Exception : 0xc0000005
Meaning : ACCESS_VIOLATION -- null/bad pointer (missing asset, bad .ltx ref, corrupted mesh)
Fault offset: 0x0000000000a13b7d
Access violation in main exe:
- Corrupted mesh/texture/ltx asset
- Bad .ltx config referencing a missing section
- Script error during early engine init
- Try the non-AVX exe if on AVX
0xa13b7d
When I activate Meatchunk's, this error appears.
Tried puttin the CQBSS scope on the AR-15 Hera - the one with the 60 round drum and the 45 degree curved foregrip - and got this error
only thing i am running is frosty weapon pack
turn stalker economy back off and it worked so guess that was it
Please help, the game started crashing at the Zaton location with this error.
I took the third story mission, "Operation Afterglow."
Then I rerouted to the Zaton location using a guide and walked closer to the center of the map, and the game crashed.
guys before i do enything stupid do i need a new game if i install modular atachments system?
Can I update the IX-Ray engine for GAMMA? If so, how? And if so, can I continue my current save on it?
im having this issue whenver i try to go to certain areas(like x18 lab, prypiat, and some others) and im not sure whats even causing it.
the only mods i downloaded were:
-Ato5
C Consciousness Grass & Trees v0.71
Arrival - Anomalies
Diolator`s Texture Rework
and i also enabled Black market.
anyone know what it is the problem?
Hello can somebody help me?
The key binding isn’t working properly anymore. In my case, I keep trying to assign the grenade launcher (underbarrel launcher) to the U key, but it doesn’t work. I go into the menu, then to Settings → Controls → Keybinds. Only some changes actually take effect. The U key shows no conflicts in the MCM.
Wait doesn’t Warfare Mode allow you to strengthen your own faction by donating guns to friendly traders at your base? Especially if they’re mostly/fully intact and in bulk? ~ { I.E. 28 AKM’s given to Clear Sky’s Gunsmith = A really fucking bad time for Renegades, Bandits, And The Military? }
Is the sky supposed to look like this? I'm only using LASS and Jam voice lines for LASS, I deleted the shader cache through the launcher and I'm using dx11, it started to look like this after sleeping.
!warfare
@red frost
G.A.M.M.A. isn't built with Warfare in mind, and Warfare is known for bad performance, bugs, and various issues, which is why it is not recommended.
You are free to play it if you wish, but please understand that support for Warfare-related issues will not be provided in our support channels.
incorrect arrival install
lmao what
prefetcher is not compatible with custom mods
so disable it
fucked up arrival installation somehow
3d scope is dx11 only and you're playing dx9
Hey, technical question
I'm reinstalling SSS and I want to know what boxes should be checked at the end
Thanks
!sssupdate
@sharp breach, follow these instructions :
- Find
190 - Screen Space Shaders 23 - Ascii1457mod in MO2 (use!mo2searchcommand in https://discord.com/channels/912320241713958912/1012510897136222293 to learn how) - Right click on it -
Reinstall mod - Choose ticks in boxes as on the screenshot
- Click Ok, then
Replace
⠀
And the last box "Manual Installation - Modded Exe"? Uncheck?
Yeah, don´t check that.
okey, thank you so much
How can I make my game have fewer stutters?
!sutter
!stutter
@hushed cypress
Assuming you are on the latest version of GAMMA, try any one of these at a time (in no particular order) to see if it helps with stutters or microfreezes:
- Bring your modlist back to default (type
!defaultin #🤖bot-commands ) - If you have a NVIDIA GPU, you can enable Triple Buffering, and set
Low Latency ModetoUltrain NVIDIA control panel - Open Anomaly Launcher via MO2 and tick Prefetch sounds
- If you have a beefy GPU, use Anomaly (DX11) (no avx)
- Activate the
Turn this on if you stuttermod to alleviate stutters while losing some FPS - Consider looking at #╰⚡fps-optimisation for a performance boost, if that channel is locked go here to unlock: #⏩start-confirm
- In game, go to
Settings > Modded Exes > Optimization > Lua Garbage Collectorand increase this bit by bit until microstutters/freezes stop. Default value is 300, people seem to find that 750-800 is the sweet spot, this will depend on your hardware
Fml
Please help
Can anyone help me figure out what is enabling these map spots? I have smarts disabled in warfare settings. I am not playing on warfare.
!warfare
@upbeat vortex
G.A.M.M.A. isn't built with Warfare in mind, and Warfare is known for bad performance, bugs, and various issues, which is why it is not recommended.
You are free to play it if you wish, but please understand that support for Warfare-related issues will not be provided in our support channels.
The video is funny and all, but I wanted to know what mod it is that makes the weapon in your hand swing in a more realistic way.
. . . I want my money back
Music used:
Baka Mitai Dreamybull Jazz cover
https://www.tiktok.com/@theonlydreamy/video/7402676742353210655
I'm still using the old wltr's modpack from 1.5.1 because I forgot how to mod the game after 2 years of not playing: https://discord.gg/nJNuyZEP2C
Also Desolation is on 1.5.2 now.
Wrong place to ask, go there -> #╟🔰☢newbies-chat
ah okay
updated my graphics drivers and this is happening now; fix?
!defaultkey // Make a backup of your user.ltx in case this doesn´t fix it.
@copper sail To bring your in-game settings back to default, DON'T press the "default" button in the game menu - you'll mess up everything.
Instead, do this:
1) Go to GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
2) Copy the user.ltx file you'll find in there.
3) Go to Anomaly\appdata and paste the user.ltx there, and replace it.
worked, tyty
This happens every time the "new ump 45 "loads. Can anyone help ?
Hey everyone, im having a similar issue that others were having a few months back but with the kmac PDX "terminal" model. Im positive i just messed somthing up but any info would be appreciated
i am having this error while installing glossy puddles
!aoe
@gusty elbow
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
ah...my bad then
Doublecheck the instructions for that weapon.
Messed up somewhere
has anyone ever encountered such friezes?
Does anyone know how to adjust the arm models? On some weapons, the edge of the arm, which is usually behind the camera is visible
Oh, it's hud fov
Well it helps anyway
I went through the full instructions to remove the rotten meat through the bot command but now it just gives me a error whenever I load my save and can only play when I put it back on can anyone help?
none of my detectors are turning on the animations plays but nothing happens. any ideas?
Nobody?
it looks like its has to get to sounds of the firearms from the hard drive. in the launcher try ticking prefech sounds
and see if it works
Does anyone know how to make all PDAs locked? (I'm playing a mod where every stalker drops a PDA and I want to make the game more interesting)
Help! I downloaded the Frosty Weapon Pack mod following the video instructions in the archive, and activated the mags mods accordingly, but now Gamma won't launch. Whenever I click "Play" in the launcher, the game doesn't start. When I disable all mods, everything works, but I want the mod! Thanks in advance for your reply.
Have you cleared your cache also?
I just installed both the gamma and the mod so there shouldn't be any cache
Hey, so I'm using the G3 and I was going through the different optics I may like on it, and both the suppressor and some optics appear a deep blue. Is there a limitation of attachments or am I just having something funky going on?
deep blue -> no texture
its like the pink black checkers in Source engine
So i take it maybe I'm missing textures or...
9/10 issues come from incorrect install
i can't give more than general advice and general cause from this
like its obviously g3 but i dont even know what mod that is
Incorrect install or corrupted download
it's made by Kmack, its in THIS discord i think
Then read instructions, re-download it
I would, I guess I'm worried if I do so then i'll lose my rifle in game, which took looong to get. Would it actually do that?
No
???
there you go
Lmao
ah okey dokey, thanks! Yeah it's most likely that lol. I don't wanna be dumb here, but where's the tab for the G3 again? I'm not good with Discord...
Search #1035807043933720576
Thanks a ton. Again, sorry. Discord is new to me, the help is appreciated a ton
After installing GIMP following the instruction first launch was a crash. After launching the game again gun stats became bars instead of numbers and the tiers below them disappeared. Also the background for the text is gone now. Initially used it with Sota UI but then tried without any UI mods.
Jo g I have encountered this aswell would you please let me know if you found a solution 🙏
Is it safe to enable the Trader Destockifier mod mid-run or do I need to wait until starting a new run to enable it?
clearing shaders fixeed it after a pc restart
Does HD model for NPC can be enable in current save? Downloaded one for merc but it seems to not work
does not work
Playing on CachyOS, game plays well but often crashes when changing zones, and that map will constantly crash until I find a new map that's crashing, then that one is poisoned for a while again.
tried all of what Sudo67 did. Has happened many times preventing me from going into Agroprom, Rostok, Garbage, Swamps, and Army Warehouses.
Crashed both before and after I added the CheekyNumbers mod, but I am playing with it now otherwise stock GAMMA.
Any idea what the cause/fix is to stop this happening forward? I have a couple packages to deliver and I wonder if "CalcDistanceTo" is related?
just in case you are a moron such as myself, these map spots were from having debug map markers on in the mod alifeplus
guys
i just discovered
my grenade launcer dont work
i cant use gl either
me tooo fk sake
bro im suspecting fkn gimp man
Cool cool i assume you also had this for rf receiver?
Hey how do you install RWAP ? I tried to install it but my game CTD everytime I launch it
Anyone getting Magazine redux to work? I've disabled 'GAMMA Unjam on same key' and it keeps crashing
!mags
@kind iron
How to enable magazines in GAMMA: #╭📖faq message
Do NOT use 207- Mags Redux or Mags Buyable at Traders!
oh, thats why, thanks
and then there's requirements you've probably read
Ask oflin, he actuallly found a fix fo rit
it involves a console command ingame
@vagrant lance help me out man im strugglin here

Grenade launcher not working
!ubgl
@kindred slate
Switch to Under-Barrel Launcheris not bound by default, go to Settings -> Keybinds and set it to a key
-# If the bind doesn't work properly you can always revert the keybind separation by opening console with~and typinguse_separate_ubgl_keybind 0Vkey is nowSight Aim Mode Toggle(aka canted scope) ONLY, by default
do you want me to go through our dms to get it for him?
unseparate it
ty orphan
so i have to use V now?
so seperate keybind no longer works? what is happening?
I have no idea man.
it will likely be finxed in the next major update. (not too long now)
Everybody is experincing it, if thats soem closure.
it is i was about to go mod by mod to find the issue and that would take days bro
yeah...
Like a kid crying to their mom cause their toy broke
yes obviously only kids need help, adults know everything by default
I’ll hold back
cringemaxing
But kids are obnoxiously crying for help at everyone around them, instead of just asking once and waiting for an answer .
There ya go
Yeah indeed because adults know everything by default
Thanks for ur opinion which no one asked for
I can't get it working
i doubt anyone can help you read the installation instructions
This supposed to be a channel for if you follow the installation it crashes anyway
Maybe I'll try to reinstall it maybe i did something wrong who knwos
you probably just missed 3dss patch
Because in gamma fixes there's like 3D_Shader_Scopes_for_GAMMA_ and 410- 3DSS for GAMMA - Redotix99 & Andtheherois & party50
Which mod are you trying to install?
like wtf am I suppose to do
did you install 3dss patch from THIS
Yeah I did
!rwap // I’ll leave this here and go away, I believe in you Jack
@opal fiber REREAD THE INSTALL GUIDE FOR RWAP #1036727845726204024 message ⠀
read my message above
Or well below yours
Well then, read the instructions. In the pins of RWAP thread and also why are there 2?
Just one of those is activated right?
(Probably downloaded an update or whatever)
Oh right have fun btw 
Oh yeah it's because I downloaded the most recent update
Thought so
Should I leave the 410 one or the other
People still holding a candle for rwap when it hasn't been updated in months
Wdym?
Just leave it as it is now.
Read instructions and you’re done.
And Yoda is gone welp they’ll figure it out
@opal fiber You got it I hope?
I gotta go sleep I’m dead tired
All good
Your help was really much appreciated !
So stuff is working now?
I'll try on an existing save !
But it works in testing in debug menu when you press F2 and you spawn one of those weapons
Good, got at least something done besides being stupid in front of ATHI and starting a fight
Off I go

I'm using the Liz Tools weapon cover tilt editor and while it's really nice, it seems to reset every time I log out of the game. Anyone know if it is supposed to be persistent, or do I need to readjust it every time I log back in?
Nvm user error as usual 
Just got this crash while fighting mercs in northeast great swamps. I have some additional mods but the incriminated script seems to be a GAMMA default one (either GAMMA voiced actor or GAMMA radiation effects overhaul)
`~ ------------------------------------------------------------------------
~ STACK TRACEBACK:
... _g.script (line: 2063) in function 'alife_object'
... agdd_voiced_actor.script (line: 119) in function 'is_actor_in_squad'
... agdd_voiced_actor.script (line: 143) in function 'actor_speak'
... agdd_voiced_actor.script (line: 223) in function 'func_or_userdata'
... axr_main.script (line: 284) in function 'make_callback'
... _g.script (line: 118) in function 'SendScriptCallback'
... xr_motivator.script (line: 396) in function <... xr_motivator.script:319>
~ ------------------------------------------------------------------------
Time continual is:12022857
!ALIFE OBJECT ID IS 65535!
! [SCRIPT ERROR]: ...anomaly/bin/..\gamedata\scripts\agdd_voiced_actor.script:119: attempt to index a nil value
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : E:\ANOMALY BUILDS\2026.04.06\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 286
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...anomaly/bin/..\gamedata\scripts\agdd_voiced_actor.script(119) : is_actor_in_squad
LUA error: ...anomaly/bin/..\gamedata\scripts\agdd_voiced_actor.script:119: attempt to index a nil value
Check log for details`
My modlist :
"months" feels very generous. hasn't it been functionally abandoned by author since like 2023?
For some reason whenever I reload my gun(using mags redux) it takes my mag out of my loadout
I have to manually go in and put it back, doesnt matter how much ammo is in the mag
Genuinely is starting to get very annoying
Most of the freedom in army warehouse is aggroed onto me as a loner. Ive killed 3 freedom that I know of, two awhile ago for a quest I picked up by accident, and 1 from an ied trap I layed for the gatekeeper mission, but I visited freedom base afterwards and they werent angry. I made a pit stop for some quests to raise their level and everyone save 3-5 are shooting at me. Second image is my current goodwill level with them, which is maybe why they are shooting? Though I dont know why it would take them this long to start shooting rather than just shooting after I killed the one with the ied?
The only mods I have enabled (beyond whats base for gamma) are mags redux, duty expansion, mugging squads, and reinstalled the foilage mod for spring/summer.
TIA, even if im told im sol for this.
I made some weapons appear in debug mode to test them, and when I put the weapon in my hand this happens.I haven't updated GAMMA in months.
Hey i found a scope in game but when i try to look into it the vision is black and I can only see through it while moving the gun to the right?
just dont spawn them
Nevermind died and lost it all anyways
That can't be the solution; there must be some kind of patch.
or something
some weapons are bugged bruv or too old
which gun
that gun doesnt even spawn in gamma
Idk didn't get to look at it much before I was killed XD
yeah it was arrival, thanks.
but how did i install it wrong? some option that i chose?
Is it possible to put mini map top left or get vanilla anomaly mini map back?
fixed it
Can someone help me with an issue? I was playing Gamma this afternoon with zero issues. Shut my laptop down to go back into work, and when I came back later this evening, Gamma won't start up anymore. I click MO2 to start everything up, clear my shader cache, then hit play on DX11 with AVX. It loads for a little bit, does the black screen right before the main menu, and then crashes back to the desktop. No warning errors or crash logs or anything. Any help on this?
!launcher // try play like this but DX11 no AVX
@burnt pond
Select Anomaly launch method using drop-down list in MO2 from the following (look at the screenshot below).
- You don't need additional actions to play on DX11.
- In order to play on DX8/9, you have to perform next instructions -
!dx(use #🤖bot-commands for this). - DX10 is unsupported ⠀ ⠀ ⠀ ⠀
is there any way to remove shift as a modifier for quickmelee?
It works! How'd you know?
Does anyone in here use RWAP and the MAS plugin for it? For some reason, I can't start a new game with them enabled otherwise I get a Loadout error crash. I can disable them, start a new game, and then quit and reenable them, load back in, and everything works perfectly fine from there on out.
!rwap
@burnt pond REREAD THE INSTALL GUIDE FOR RWAP #1036727845726204024 message ⠀
my games crashing once the anomaly loading screen finishes not sure whats causing it as it hasnt dont this before, last thing i remember doing when it crashed was going to yantar through the agroprom entrance. these are the mods im using as well
!sss
@sonic inlet To reinstall SSS using the GAMMA launcher:
- Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip
(x.x. means version number, and yes delete them all if you have multiple of those zip files) - Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
- Place the downloaded file into your
GAMMA\downloadsfolder. - Open the GAMMA Launcher, and uncheck/disable these options:
- Check MD5
- Force git download
- Click "Install / Update G.A.M.M.A."
can these mods break the game with this error or is it base game thing
!094
@mellow finch
If you're experiencing crashes after updating G.A.M.M.A. from version 0.9.3.1 to 0.9.4, open MO2, locate and enable this mod:
Pre-0.9.4 Saves Fix, inside the Alternative Addons & Patches category.
If you don't have REDONE mods, this "fix" is only a temporary solution. Starting a new game is highly recommended.
If you have, keep this enabled, it is required for REDONE in GAMMA
I have done all this and even updated and reinstalled it all and it still does this
@drifting magnet
read
ok I am just stupid thx
Weapon Laser sight not working how to fix(laser dot) ?
Do I alter the Kmack mp5 remake ltx or the GAMMA 3DSS One
Fix
disable prs
wtf is prs
parallax reflex sights
It was working before

Also is that a default setting?
depends on what are you trying to achieve
I am on DX8 , accidentally turned on 3DSS and now it is fucked
It is disabled btw
whats your mod count
Oh also this is off already
I think it was at like either 537 (I disables some stuff and enabled one or two) or 547
i need names
It is the up to date version
not "stuff"
Idk
!default
@naive mesa
To bring your mod list, settings and keybinds back to default, inverting any changes made by you:
- Open the G.A.M.M.A. Launcher with admin rights
- Uncheck every box EXCEPT
Delete Reshade DLLs - Click on
Install / Update G.A.M.M.A
Note: If you wish to keep your keybinds and graphical settings, go to Anomaly\appdata and backup user.ltx.
I can list all I have disabled
do you even have dx9 profile?
Yes DX8 and DX9 - 0.9.4
Ugh
its incompatible with dx9
Is it just the save? Nothing else?
Cause I did not progress far, it is just inconvenient
yes
Its still broke on a new save
Have you found a solution?
Why ts need to be so cancer to do shit with
Guess I gotta wait like 48 hours to just find a new problem!
EDIT: Its Shell Particles Redone again, will try to see any compatibility changes
Well ig this is what fixed for me
Disable all the optional stuff for Shell Particles Redone mod if you are using it
If it still crashes, then remove the entire Shell Particles mod
I turned off atmosferics and the error disappeared, I'll try your option now
I still have the problem, only disabling Atmosferics helps
prob update your atmospherics
or see what mod is conflicting with atmospherics, especially the mods you added later
Make that forever
So with the two latest versions RC2 and RC6 this problem arises
I have a crash because of the sr-25, I think he did something tricky with shaders or materials, that’s the error
Nvm I fixed it myself, I forget what I did but I disabled something and now they are all fine, different reticles all together but centered and working
Uh hey, I keep getting this weird error log whenever I try to start a new playthrough? Any ideas on how to fix it? It keeps on saying smth about the "loadouts_injectorscript(201) : create_item"?
!mo2search - type loadouts_injector on the right side in the search bar
@red frost Use the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.⠀
this is unfortunately all that came up, which I have tried messing around with these to see if they do anything to remedy the crash, however to no avail. All though I'm all ears if you have any ideas as to what might actually end up fixing the issue.
Again, it's specifically whenever I try to start a new play through from the loadouts menu
THE RIGHT
Hmm?
check the screenshot
you put the search in the LEFT
you need to put it in the RIGHT
Wait I'm confused x_x
OHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
I SEE IT NOW TYTY, omfg I'm so blind xD
Okay so I found the culprit? I think :
!rwap
@red frost REREAD THE INSTALL GUIDE FOR RWAP #1036727845726204024 message ⠀
skipped step 2
okay so did I just have to install the 3DSS Patch?
Because I can only find a link that takes me to that patch?
- screenshot with many red arrows
- the link to same text
From \RWAP_Main\gamedata\scripts delete\rename loadouts_injector.script
but yes you need to complete the full installation guide
but the crash is caused by this specific thing atm
Anyone knows how do I fix this? Thanks
delete\rename means you can either delete OR rename
Oki thx!
So how do I go about deleting it? Do I just open it in notepad and highlight everything and then hit Backspace?
I am completely stumped on this one
I have KVMA installed and it has worked fine for days, but now I suddenly I cannot open the game
Of course it does work when KVMA is disabled, and all the mods that KVMA said to disable in its instructions are
I just have no idea what could have changed between me closing GAMMA yesterday and then again today to have this
Current active mods: 558
- GAMMA Magazines
- Solarint's JSRS v5 GAMMA PATCH
- Terrain Textures Redone
- Rotten Life
- C-Con Grass and Trees Overhaul
- Arrival
- Painter of the Zone
- Realistic Reflections Droplets
- KVMA HD
Attempted Fixes:
- Reinstalled KVMA
- Tried DX11 and DX11-AVX
- Deleted Shader Cache
- Disabled MSI Afterburner, RTSS, and ShareX
- Restarted PC
- Installed Painter of the Zone OVERHAUL 8.9.3.7. and KVMA Hand of God Meshes
- Installed KVMAs Arms and Legs Patch
EDIT:
This is mainly for me when I inevitably forget this fix and start CTRL+F-ing like crazy
UPDATE THE .EXE YOU STOOPID!
Anyone know how to prevent the item card/details of an item showing unless right clicking to show details?
Okay, so I fixed the RWAP issue, yet there's anoth problem now, something to do with ZCP and mutant spawns I think?
So it seems to work with Painter of the Zone disabled and vice versa
It's just so strange since it worked fine before...
@slate hedge I have KVMA also with Painterofthezone they don't have conflicting files in MO2. Does it show the same for you?
Same here
i have a "patch_kvmas_armsandlegs" mod before KVMA in MO2 do you have that by chance i didn't see it listed?
I do not have that... maybe that's it?
Where do you get that file?
Google Docs
Put right before KVMA
I'll give this a try
Where is this sourced from, by the way?
its step 4 of the KVMA install guide on gamma
Where is this guide?? I must be stupid if I've missed it
always check the "pinned" at the top of the post!
Thanks so much, gonna try this in a sec
ofc! let me know if it works im not even close knowing THAT is the problem I just see we have the same mods!
That did not seem to be it unfortunately
I did find this for PoZ and KVMA so I'm running through this next
#1290829430020898826 message
Still no dice
The weird part is it worked completely fine until today, so I have no idea what could have changed 🤷♂️
Tried equipping the gauss rifle, game crashed and got this
Changed mods: Body dots, unlimited stash weight, Season, (i cant really remember all of them, but no gun or animation related mods, except disable double click F for inspect has been turned off)
!gausstempru // found only in russian, but seems to be the exact same error
@gleaming gorge
Если у тебя вылет с ошибкой: section wpn_gauss_hud model dynamics\weapons\wpn_gauss\wpn_gauss_hud, сделай следующее: #🔨поддержка-стандарт-gamma-ru-ua message
pretty self explanatory even without knowing language, download; install through Mo2
Thank you
Worked, thank you again
how to fix some weapons being invisible?

specificly happening with Colt 1911 Nightsword Custom
it's strange because the model definitely works, i can drop it on the floor and the model is there, it's just when i pull it out theres nothing on the screen and i am unable to change guns, is this some sort of busy hands glitch?
ah i see, 3dssg
Where do I find the reshade presets that used to come with the gamma pack?
can someone help me out? the only extra mods i have are the magazines, "pda hacking" and "sprint cancels aim and lean"
!modlist
@fading peak Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
!reshade
@tranquil coral
Download the software from https://reshade.me/ and install in the Anomaly/Bin folder
There will be no official support provided for ReShade, for any issues you can try seeking help in: #╟🎑reshades message
If you can't access that channel, go through https://discord.com/channels/912320241713958912/1029827096488452137 first
"0708","+","207- Anomaly Magazines (Disable G.A.M.M.A. Unjam Reload) - RavenAscendant"
why is this enabled
it shouldn't be, hollup lemme check, prob turned it on on accident
yep, checked the wrong one
turned it off now, thx
I started a game with the number of mutants set to 0.05, thinking there would be a lot of them, but I haven't seen any. Can I change it even after a run has started? Or do I have to start a new one?
you can change populations
Yes. I know that, but can it be modified in a run that's already started, or do I have to start a new one?
Works for started ones too
Can someone explain, what i need to do?
Eastern and Middle Eastern AKs Pack
Help! I downloaded the Frosty Weapon Pack mod following the video instructions in the archive, and activated the mags mods accordingly, but now Gamma won't launch. Whenever I click "Play" in the launcher, the game doesn't start. When I disable all mods, everything works, but I want the mod! Thanks in advance for your reply.
hello guys, would the radiation by arszi's be ok to install on gamma?
its the radiation mod where it changes on wind etc
!psa
@dense sable General PSA:
No one can provide help if you don't provide a list of changes you made to your modlist.
At minimum you need to provide:
- A description of what you did in-game when the crash/issue occurred
- A description of what the issue is (no, just posting a log doesn't count)
- Your Anomaly log (
Anomaly/appdata/logs/xray_yourname.log) from right after you crash - A description of all changes made to your modlist - this can be a list of changes, your generated modlist from MO2 (check
!modlist), or a description of what you changed.- Yes, this includes all mods you enabled OR disabled, whether or not they came with GAMMA
Fuck around, find out.
Test on a new save.
Okie
You updated modded exes? Game crashes with fwp if you're on old modded exes
I cant come in game, when i click play in anomaly launcher game dont start and automatic closing
drag the folders into anomaly folder
see if that fixes it
if not recheck !mags on here, maybe the mag tutorial on fwp video is outdated
Expression : <no expression>
Function : CInifile::Load::<lambda_c6a239502a3860851a9288828a946d7d>::()::<lambda_40577bb68d949d74012dcd4f9319e60e>::operator ()
File : E:\Anomaly-1.5.1\xray-monolith\src\xrCore\Xr_ini.cpp
Line : 374
Description : fatal error
Arguments : Duplicate section 'weapons_nato' wasn't marked as an override.
Override section by prefixing it with '!' (![weapons_nato]) or give it a unique name.
Check this file and its DLTX mods:
"w:/gog galaxy games/s.t.a.l.k.e.r. gamma/anomaly/bin/..\gamedata\configs\items\trade\trade_freedom.ltx",
file with section "blackmarket_mags.ltx",
file with duplicate "blackmarket_mags.ltx"
stack trace:
how do i fix this error?
!modlist
@unique dust Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
i have alot of mods but the issue is coming from the black market mods im pretty sure
"0396","-","G.A.M.M.A. Economy (don't disable, turn on Black Market to buy gear)"
first of all try enabling this
im trying to play on dx9 :(
Expression : <no expression>
Function : CInifile::Load::<lambda_bd08e369736f10f663f30c8abe155b58>::operator ()
File : E:\Anomaly-1.5.1\xray-monolith\src\xrCore\Xr_ini.cpp
Line : 821
Description : fatal error
Arguments : Section 'nato_3_1_mags' has cyclical dependencies. Ensure that sections with parents don't inherit in a loop. Check this file and its DLTX mods: w:/gog galaxy games/s.t.a.l.k.e.r. gamma/anomaly/bin/..\gamedata\configs\items\trade\trade_freedom_ashot.ltx, mod file blackmarket_mags.ltx
stack trace:
i get this crash instead
oops wrong log file
!mo2search // type in blackmarket_mags.ltx in the right side show me what it give you
@unique dust Use the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.⠀
brings up this file with nothing in it
i'll try to think real hard one more time but i'm starting to lean towards your save being bricked because you disabled GAMMA economy
like generally that initial error is fixed by doing what error says but you yourself see the file is empty there is no NATO section
Anyone know which mod returns the main menu music back to the previous one?
None of the music mods i disable change it
disabling black market removes the errors, but when interacting with mechanics i get this error and the traders arent selling the glues, repair kits, etc anymore just tools and weapon parts: Expression : <no expression>
Function : CInifile::r_section
File : E:\Anomaly-1.5.1\xray-monolith\src\xrCore\Xr_ini.cpp
Line : 1224
Description : fatal error
Arguments : Can't open section 'supplies_1'. Please attach [*.ini_log] file to your bug report
stack trace:
its annoying but manageable
yea im sorry i just dont know how to make them both work now
The only idea i have atm is enabling them both -> go to a map without any traders -> sleep/skip time until next trader restock
Ok so this happened
did you follow dx9 guide
is artis + egui a bad idea?
error related to crafting ammo
i did, i´m just trying to see if i can use any of the shaders and stuff most of the enabled mods are from the "G.A.M.M.A. Fixes" tab.
Yeah i pressed an artigrok munition craft in my bench just b4
Ok its with all ammo variants not only arti's ones
did you verify dx9 works with the guide though?
Its about EGUI
i guess can try to disable Serious Workshop optimization
i literally havent found anything related to the error except that its...crashes because of something Ammo-Crafting-UI related it doesnt like
what are these fucking errors man
Istg
I installed RWAP weapon pack, after some issues it works fine. But all RWAP rifles with perfect condition and with silencer on have jam probability 1.98%...That means they jam too often compared to gamma rifles. Is there any way i could edit these numbers?
does anyone know why more than half of the shaders give me a black screen? (not talking about the LUT shaders, i'm not even trying to use those)
yes, you can edit the config files of the weapons in their mod folder ltx
But where is the line responsible for weapon jamming with silencer? I can only see "normal" misfire probability....
Search on the file for "probability" "chance" or "misfire" or "malfunction to check on them, then compare with any file from another weapon you like
Yeah that fixed it, and almost broke my pc from the lag, but fixed it
yea it did work flawlessly.
misfire_probability = 0.0005
misfire_start_condition = 0.7 ; 0.68
misfire_start_prob = 0.06
misfire_end_condition = 0.1
misfire_end_prob = 0.1
This is all I have found, but i has nothing to do with silencer i think
can try enabling the mod but disabling that specific file but i doubt it would help
something weird with ammo crafting ui
Check on a mod called silencer dont increase jam chance or something like that in the gamma modlist
this message won't stop pop in up, what can it be related to?
enable it one by one
But graphically intensive mods like SSS are not supposed to work
i see, although the shaders did work and i was able to make a save, the problem is when i equip one of the sights in to a revolver and the game crashes.
-----loading c:/anomaly/bin/..\gamedata\configs\system.ltx
[DLTX] [c:/anomaly/bin/..\gamedata\configs\system.ltx] Encountered !![scope_sks_b], mark section to delete
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::Load::<lambda_7c2e42607f89d05d0da0d18558a2ff36>::()::<lambda_445dd78f7711254db71cf9683a102fc9>::operator ()
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 373
[error]Description : fatal error
[error]Arguments : [DLTX] Duplicate section 'wpn_ak105_shakal' wasn't marked as an override.
Override section by prefixing it with '!' (![wpn_ak105_shakal]) or give it a unique name.
Check this file and its DLTX mods:
"c:/anomaly/bin/..\gamedata\configs\system.ltx",
file with section "w_ak105_bas.ltx",
file with duplicate "w_ak105_shakal.ltx"
voice actor refined - varefined
you enabled 3dss right?
thats why i said enable it one by one
if game crash - not supported on below dx11
yea all these ones
Thank You!!! I added this mod to active and all works fine!
i downgraded my dx to get rid of graphic intensive mods
im trying to reenable all graphic intensive mods
game crashes because no support for graphic intensive mods
like good luck, you're doing something weird
For some stupid and weird reason putting serious optimization below EGUI makes it work fine 
oh, well i did not downgrade because of the graphic intensive mods but because of the engine :v wich i did not think it would be something that bricks :( and the game does open with some sss and also some 3dss mods, its just that, equipping a attachment will crash the game due to idk what, that is why im here, but ty tho.
cant you just play on dx11?
yea at 20-30 fps most of the time :(
like here it loads but I'm jus trying to know why i cant equip those sights
follow this guide #╟🔰☢newbies-chat message
i already told you
its not supported
oh, i see now :p
because you downgraded from dx11 and enabled dx11 mods
I have a question. If i were to fucking corrupt ANY file accidently, can i just hit "Install/Update" gamma on launcher, and it would replace said mods with their default ones?
i got a problem
do someone got theses 3 files uncorupt
cause my fal's aint good especialy the variants are shooting the ground and the original is very weird
like i take a aim and i se the impacts in front of my foots
aint shooting straight
Started a new game, when talking to Sidorovich I get this crash.
What could be causing it and how to fix it? Installed mods are in the 2nd screenshot.
!slap8
stay in one support channel
am I asking in the wrong channel?
im getting assblasted by these duplicate files HOW DO I BEAT THIS
disable one of the 3dss instances
!shader
@storm elk To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
hello have you heard of the mod Audio Expantion?
thank you.
thanks
does anyone know if the xrMPE works on gamma i tried looking it up but it was inconclusive
anyone who uses lootboxes have an issue with using the trading computer mod?
i get these two errors whenever i try to use the laptop
my game doesnt crash tho, the errors pop up and im able to close them and go on with my day
How odd
What engine are you using ;3 @misty canyon
!aoe
@misty canyon
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
cool
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
Line : 286
Description : fatal error
Arguments :
1 : [Lua] ...lker anomaly/bin/..\gamedata\scripts\ui_inventory.script(2183) : _Picker_Toggle
LUA error: ...lker anomaly/bin/..\gamedata\scripts\ui_inventory.script:2183: attempt to index field 'ico' (a boolean value)
Check log for details
stack trace:
i'm getting this error when i get the AWP from the lootbox mod.
*when i open the inventory with it
should i provide my modlist?
Where can I ask support for installation for Frosty's gunpack. I followed the video installation guide they have in the thread, gamma auto-closes. I followed the video in their updated zip file, gamma still auto closes. Did a clean reinstall of gamma even though I've only been using vanilla gamma since day 1, followed the videos again, gamma still auto-closes. I'm at my wit's end on wtf I'm doing wrong and some help would be nice...
did you update your modded exes?
Yeh
I'll try to reinstall everything (for the nth time) and update modded exes (pt.999)
Maybe I'm not doing it right. How do you update modded exes? GAMMA launcher the click the update right? Or do I have to manually download then drag and drop the files on this post?
second one
Gocha, where do I put those files once I finish downloading them
anomaly folder
still downloading the 20 files
once done though, do I extract all files one by one into the anomaly folder?
here's my modlist in-case it helps
just vanilla gamma
also done downloading the 20 assets
I'll just wait for your reply before I do anything.
You only needed one, STALKER-Anomaly-modded-exes_2026.4.21.zip specifically. Backup your bin folder in n:/Anomaly/ folder, and drag and drop both folders from the zip file into the main Anomaly folder, where you can see bin, gamedata, etc...
ohhh the link provided here only gave STALKER-Anomaly-modded-exes_2026.4.6.zip
where can I get STALKER-Anomaly-modded-exes_2026.4.21.zip
Well because these didn't come out when that message was sent. https://github.com/themrdemonized/xray-monolith/releases/tag/2026.4.21
So I need just the one file which is "STALKER-Anomaly-modded-exes_2026.4.21.zip" right? Sorry just making sure I don't fk up any further
Yes
gocha, downloading it now and will msg here again once done installing it into anomaly
!surgecrash
@tiny orbit
If you crash with this error during an emission: surge_manager_ignore_npc
1) Open your mod organizer
2) Find 265- NPCs Die in Emissions for Real
3) Right click on it, click Reinstall, pick all 3 options and then Replace
If you crash with this error after an emission: 1035 pure virtual function call
1) Open your mod organizer
2) Find Turn this on if you stutter
3) Disable it.
💜 thank you!
srry work called, doing the thingy u said now
after puttig in the new bin and db files I just do the same things to install frosty yea?
I guess, never used Frosty's
0.9.4 GAMMA, alife+, mags enabled (pretty sure this is an alife+ issue)
ALIFE+ settings are unchanged from defaults
Here goes nothing
Thanks a ton @jade harbor and @drifting magnet!!! I shall not be an annoying twat and fk off. Thanks again!!
You're not annoying, but nobody here is available to answer immediately
So ask whatever you need
This is a dedicated channel for support anyways
is there a way to increase in mod files the amount campfire heals overall health?
Hello, someone know how i can fix this bug with the scope?
I accidentally deleted my launcher. Just the launcher I can still play but couldn’t do an update. Do I just download the launcher again then?
This happens every time the "new ump 45 "loads. Can anyone help ?
Anyone know how to disable this lol ??
what should I do if radios don't work? In PDA or in bases
From arrival, actually read what you install
anyone knows any option that could turn off the looted PDAs information from showing up? Like the custom messages and the occasionally stash locations. When I open one that I looted it just shows as the normal PDA
Question for #╟🔰☢newbies-chat
Is there a way to install extra mods to base gamma if I installed it through GOG? I wanna use LASS but I can't seem to drag the 7zip into ModOrganizer when launching through GOG
NVM I'm braindead, I figured it out
hey guys, I've been getting this crash frequently, is there something wrong with my GPU?
!d3d / kinda
@frail violet
If you get the error 1364 "The application made a call that is invalid...", try the following in order until the error is resolved:
- Try restarting your PC.
- If restarting your PC does not help, try disabling the applications with overlay (Discord, MSI Afterburner, etc.) as well as applications like Wallpaper Engine etc.
- Install DirectX libraries (type
!depsin #🤖bot-commands)
we dont know the reason behind this crash, it points to a .dds but textures cant crash you that way
Can someone says, what error 1269 means?
I get Randomly this error when i load a savegame or changing the area. When I load the autosave from the areachange where it crashed, it crashes every time when i try to load it.
Second screenshot is from the log in MO2.
(it now happens every time, but also random during other loading screens, during an area change to rostock (my stash is there) from my last Savegame)
I've found this (second Screenshot) in the log right after the crash.
Also there is: "section 'nil': field 'nil': syntax error in switch condition [=fetch_reward_and_remove(simulation_task_70_fetch:1.8)=reward_stash(true)=complete_task_inc_goodwill(50:freedom)=complete_task_inc_goodwill(-25:dolg)=inc_task_stage(simulation_task_70)=pstor_reset(simulation_task_70_fetch)=drx_sl_unregister_task_giver(simulation_task_70)=drx_sl_reset_stored_task(simulation_task_70)]"
I tried to complete task 70 with the console and switched the area again, but it didn't helped. Maybe it's the "error 203"? But I have no idea how to fix it.
I added 1 or 2 mods after the install (i'm maybe not on the actual GAMMA Version, i didn't updated since I installed it in February 26), but not in the last time. I'm not sure which mod was activated by default and which i added, but i think this are the ones i added are:
311- NPC Stop Looting Dead Bodies - DTTheGunslinger
261- Ammo Check - Ishmaeel
G.A.M.M.A. Inspect on double tap F disabler
tried downloading a mod called "HD Models for Gamma" on ModDB then this message loads up when i try to load a new save, any advice?
Hi to everyone. I have a simple question for someone who know more than me: is it possible to have kmack's and frosty weapon packs togheater?
dont check prefetcher patch in its installer
yes
THX
how do you install a mod that's structured like this?
drag and drop the folder in gamma/mods
restart mo2, it will be at the bottom
folder needs to contain gamedata folder
Help! Frosty Weapon Pack Dont Works With 3DSS, if i disable it, game working
https://www.moddb.com/mods/stalker-anomaly/addons/enhanced-gui
is this compatible with gamma? im not home right now else i would of tried it
IIRC there is a thread for it in #1035807043933720576
So yeah, should be.
Which option is it for the hip fire weapon position/orientation when using the draggable hud editor?
I thought it was hands orientations, but that is the baseline from which the others are made? FOund that out when i changed alt aim and aim position and then edited the hands position.
Or should you always do hands first and then the others?
does gamma has atmospherics extra weather cycles by default?
You’re playing in borderless/windowed and/or tabbing out during loading
hallo is there a guide on how to install atmosrc6?
did what you said and tried loading up again and now another error message popped up
nvm got sorted cheers
0.9.4 GAMMA, alife+, mags enabled (pretty sure this is an alife+ issue)
did you hire Semenov by any chance?
Where are screenshots stored? I see a message at the top of the screen when I hit my prntscrn button but the file path is either pointing to folders that I cant see or a .exe which doesnt make any sense. Im trying to take a picture of something I have a question about but I cant even with a third party screen capture software because when gamma is in focus, even when in windowed mode, will not respond to the software, only when gamma is closed will it allow me to screenshot.
!screen
@buoyant lagoon
1) While in game, press F12, go inside Anomaly\appdata\screenshots. If the screenshot isn't there, look in your GAMMA RC3 folder, inside a folder called overwrite
2) Press PRTSC (Print Screen on your keyboard) open Paint, CTRL + V to paste the pic, save it, send it.
Alternatively press ALT+PRTSC to screenshot the currently focused window, then CTRL+V to paste.
3) Windows key + Shift + S, which lets you choose what part of the screen you want to take, it will directly copy the pic for you so all you'll have to do is just CTRL + V in the chat.
Those folders dont exist. Ive looked. There is no screenshots folder anywherei n anomaly or gamma.
Any and all screencap hotkeys and software do not work while the game is open or send screenshots to a place that doesnt seem to exist
All I want to know is if the mosin nagant you can start with is supposed to look as stupid as it does when aiming down sight. That is very obviously not how you aim with this rifle and im just curious if I can change it somehow.
or if a mod Im using changed it somehow
!mosintemp
@buoyant lagoon, follow this guide: #🔨base-gamma-support message
Ah thank you
Honestly weird.. but no idea how to fix or where to look either... never had problems with that.
Welp, at least the mosin is fixed
Ive got something really strange going on with my weather. When its storming all the lighting turns into blinding white fog. Sun and moonlight make the game suddenly look like silent hill even with fog density turned to 0.
debug weather is bugged thats why its in debug only
As for sun and moon im not sure
Oh, debug mode weather editor causes this problem?
So a normal storm wont look like this?
To clarify, the sun and moonlight are fine, it was specifically part of the stormy weather problem involving the debug tools
so... i installed some mods, and i don't know how, when i lit a campfire, it plays caramelldansen with rgb light to boot, i mean i loved it, but i would like to know which mod is responsible
arrival
thx
Hi, I have this error if someone know how to fix that
Keep having this issue whenever i try to load into Zaton
This is specifically the extra mods im running with
Is it problematic to upgrade dux? Seems like the autor has upgrade the mod
can you modify the black market mod so that guns cost more when you sell them?
or at least make the guns that are fully repaired cost 5x more? i would like to sell guns but its not worth the effort
hello. there’s a problem i ran into. i picked up a quest from the swamp scientist to find his laptop at agroprom and then find 3 artefacts afterwards. the 3rd artefact at the hill anomaly near swamp transition is not appearing whatsoever. is it fixable without save editing?
!mags
@autumn linden
How to enable magazines in GAMMA: #╭📖faq message
Do NOT use 207- Mags Redux or Mags Buyable at Traders!
Is there controller support for Gamma at all?
!taskboard
Yes I did.
Zcp already in gamma so if u added it again remove it, u can try different values and see what happens but it takes a while for effects to be seen
updating gamma should pull latest version
!lam2
@lost sequoia
- Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/addons/start/286029
- Place every archive you downloaded into
\GAMMA\downloadsfolder. Overwrite if needed. - Run the GAMMA Launcher
- Uncheck/Disable:
- Check MD5
- Force git download
- Click
Install/Update G.A.M.M.A.Let it finish then try to play.
If I have the ZLM mod, what's the best number to put in the mutant spawn?
got my first exoskeleton running, and the healing animation isnt playing, anyone know the reason, or if its been disabled?
!tools
@nova radish
To get a yellow stash, finish 7 tasks, then keep doing things that will get you stash coordinates (e.g. more tasks, opening PDAs, looting bodies). You get a 50% chance of receiving a yellow stash each time. This resets upon finding a yellow stash - then you need to do 7 more tasks, and look for more stash coordinates afterwards.
⠀
anyone can help me? my psy bar and minimap are gone
!hud
@versed dune
Can't see the HUD anymore (ammo counter, PSY bar, mini-map and interaction dot marks are missing)?
- Press
Numpad Enterif you can't see it at all. - If you have a TKL keyboard without Numpad - go to
Settings>Video>UI/HUD, turn onHUD: show - Or press
Hif you can see something but not everything.
Only the mini-map is missing?
- Press
/
Missing health system (BHS) interface?
- Press
H
Can't see weapons or devices when you equip them?
- Go to
Settings>Visual>UI/HUD, turn onShow Weapon
can you modify the black market mod so that guns cost more when you sell them?
or at least make the guns that are fully repaired cost 5x more? i would like to sell guns but its not worth the effort
this annoying sound was playing in base GAMMA too before I uploaded my mods, please tell me what it is so it can be disabled
has to be whichever weapon rattle mod you installed
I'm using relax's and his audios never did this before 😭
you probably updated UAS dependency scripts which caused a conflict with relax's mod
I know enhanced ammo check has these scripts, could be it
wait I do in fact use enhanced ammo check
removing will get back to you
hi guys, I’m not sure if this is the right place to ask, but I’m having a problem with the scope AMG UH-1 + Eotech G33 3x magnifier. I’m unable to switch between the different sight modes (like toggling the magnifier on/off). Am I missing a keybind or is this a bug or i have to download another mod for that?
I assume this has been asked to death, but my m4 and (I think) a couple of other guns (not many) have their ads offset, it all appears to be in the same direction too
curious if there's anything I can do to remedy this
I get this error whenever I see the M4 hera grip modification on a vendor
I stand corrected, they arent all offset in the same way. This is the ads for the SIG SG 550
this also appears to effect all scopes too
(m4)
3DSS changed the base weapon position of many if not all guns. If you have mods that change that position, it will look wrong. The mod authors must update their mods to work with 3DSS in GAMMA.
Look for the key in MCM > 3DSS Magnifier Switch
Normally it's set to mouse scroll (the same way you zoom with sniper rifles).
You have black lens -- do you use MAS?
ah, I havent added any mods to the base gamma install that would change weapon positions so I guess one or two of the mods are just a little out of date
how do I fix the weapon inspection everytime it jams?
i'm using mags, and recently i'm having this weird problem. Every time a weapon jams, my character does the weapon inspection animation in the middle of the gunfight
I tried looking for this specific problem, I found only a single mention of it from 2 years ago and not much else
Hey, I have ammo check enabled and whenever I check ammo, the animation does happen, but no text appears. What can I do? Tried reinstalling.
Yaoh, been getting this error after trying to add some mods and start a new game, ty for yah time :)https://cdn.discordapp.com/attachments/922555488665743391/1497614192906211548/image.png?ex=69ee2967&is=69ecd7e7&hm=85e27bea9b13ce5bee16f874c88494eb034474395038d853a0bf5eb3fb73e54e&
Gamma's refusing to start and the logs are all blank
!emptylog
@whole mist
IF G.A.M.M.A. WON'T LAUNCH AND THE LOG FILE IS EMPTY:
- Make sure you have https://discord.com/channels/912320241713958912/977190498420801536.
- Check if vanilla Anomaly launches. Run it from
Anomaly folder/binand ensure you select DirectX 11 without AVX. If the game doesn't launch, use!reanin https://discord.com/channels/912320241713958912/1012510897136222293. - If Anomaly launches but G.A.M.M.A. keeps crashing with an empty log, try each of the following steps:
- Go to
Anomaly folder/appdataand find theuser.ltxfile there. Open it with any text editor, find the liners_screenmode, and changefullscreentoborderless. Save the changes and try launching the game via MO2. !k98in https://discord.com/channels/912320241713958912/1012510897136222293;- If you have a laptop, use
!integratedin https://discord.com/channels/912320241713958912/1012510897136222293; !modsin https://discord.com/channels/912320241713958912/1012510897136222293;
- Go to
- If none of the above helps, try updating/reinstalling your graphics card drivers.
!psa
@proven gazelle General PSA:
No one can provide help if you don't provide a list of changes you made to your modlist.
At minimum you need to provide:
- A description of what you did in-game when the crash/issue occurred
- A description of what the issue is (no, just posting a log doesn't count)
- Your Anomaly log (
Anomaly/appdata/logs/xray_yourname.log) from right after you crash - A description of all changes made to your modlist - this can be a list of changes, your generated modlist from MO2 (check
!modlist), or a description of what you changed.- Yes, this includes all mods you enabled OR disabled, whether or not they came with GAMMA
hello, i installed "HD Models for G.A.M.M.A." followed the intallation guide, now i get the error Can't open section 'wpn_abakan_camo'
the error present itself when starting a new game, if anyone knows what's wrong, i woud be glad
Don´t use the prefetcher included in HD models
Right click -> reinstall, disable prefetcher option
Thanks
Apologies, I'll send across details when I wake up tomorrow :)
hello, im having an issue where the RD ISG tritium sights disappear when i aim down sight, im posting here because i have some additional mods however i HAVE noticed this on vanilla iirc
oh and the modlist addons for posterity
drivers did it, thanks
Hello, I remeber that there used to be a mod called "task heaven" or smoething that gives more tasks but I can't find it in mods-posting, anyone can help me find it? Like give me it's name or a download link? Thanks very much!
I was trying to guess what it was MAS, but yes I use
I've already tried changing the 3DSS Magnifier Switch button, but it didn't work, it ends up looking like this image
I suspected it had something to do with that add-on
but I don't know if I'm the one doing something wrong
In MAS it's the V key. If not, look for Sight Aim Mode Toggle in Keybinds.
i tried enabling Mags Redux on my gamma, but it didnt work, after not having the ammo_check file, even after reinstalling Redux, i get this error now
im already using Sight Aim Mode Toggle in Keybinds, but as I mentioned earlier, when I use this scope, the gun is angled about 45 degrees to the left, like in that last picture of mine
Since I'm playing more slowly, trying to enjoy the game, it occurred to me that this particular scope is causing problems right now
Do you know what's causing the bug on the 1911?
fixed
hi, im trying to make Terrifying storms working, with the Vicious storms merged option, but it doesnt work, even with shorter psi storms disabled and even if scripts\surge_manager.script is no longer here, is the mod outdated ?
!mags
@autumn mauve
How to enable magazines in GAMMA: #╭📖faq message
Do NOT use 207- Mags Redux or Mags Buyable at Traders!
!aoe
@torpid vault
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
I installed C Consciousness Grass and ATO and now my game looks pitch black
ultimate backpacks doesnt work with gamma?
getting this error after opening backpack, then it appears after dialogue close and when opening f7-1 menu
!aoe
@crisp sigil
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
have this issue not, do did you manage to fix?
yo i installed kvma and my icons are all messed up whats the fix?
Check pins of KVMA thread in #1035807043933720576
thanks
ive already done that
i havnt played gamma in ages is it ment to be like that?
yeah i have
A bit too bright I guess, but anyway not something for support.
fatal error
[error]Arguments : Can't open section 'wpn_abakan_camo'. Please attach [*.ini_log] file to your bug report
Dont use the prefetcher
mm ok then let me try
not using prefetcher
Decided to try the Toz reanimation that recently got uploaded to moddb, but when I tried equipping the sawn-off, I crashed without an error message. Looked in my log and I see this:
i use that too hmmm
Do you crash with it or nah?
yep
crash on start
Oh interesting
game crashing when i try to auto loot
!strexplode
@west laurel
If you crashed when trying to shoot a weapon: Go to Settings > Visual > Player and disable Enhanced Recoil Effects
If you crashed when trying to auto-loot a body or stash: Go to Mod Configuration Menu > Auto Looter and disable Auto Disassembly for Ammo
thanks
!backup // From what I could find you need to reinstall anomaly, type !rean in #🤖bot-commands , but make a backup beforehand since you need to run the launcher.
@ruby mortar
Follow this to "save" your settings and keybinds before updating: #╭📖faq message
And if you want to keep your personal mod list between updates, follow this: #╭📖faq message
so what do i do reinstall anomaly and gamma?
Just anomaly
Follow this
Never delete and reinstall gamma unless ABSOLUTELY needed.
In almost every case it´s not and can introduce new issues.
I have some issues with RE DONE. I'm playing redone collection with ZLM as stated in the guide and I get like no mutant spawns
I didn't install respawn because I don't want any new mutants
Running Pizza's Ultimate Sight Selection, Modular Attachment System, 3D PDA Patched for Gamma, and NullMoxy's Campfire heals limbs mod, get this crash whenever getting tasks anywhere other than Rostok for some reason
I'm pretty sure the only thing I changed is making it so merc voices aren't English, but I'll still use this channel instead of base. Basically, I crash not too infrequently upon reloading saves, transitioning to another zone, and ALWAYS when reloading a save during an emission. It says to check the log, which i imagine is something other than the MO2 log. That being said, the MO2 log box just says "Unable to obtain handle for monitor '\.\DISPLAY 1', defaulting to 96 DPI."
Let's try this again while being actually helpful
The screenshot has all the mods that I'm trying to use for my current run
Having an issue where I crash on start-up, I get past the little 'Xray Engine' loading box, blackscreen for approx 20 seconds, and then crash with the error popping up
I have disabled:
29 Duxs Innumberable Character
30 Duxs Innemurable Characters Kit Blackjack patch
31 Fixed Vannila Models
32 FVM Nosorog
251 Better protraits icons
G.A.M.M.A. Better Mercs Voices
If there's anything else you need lmk :)
I disabled SSS, Atmospherics, ES, and Beef NVGs and now I get this: ```! [LUA] SCRIPT RUNTIME ERROR
! [LUA] ...gamma/anomaly/bin/..\gamedata\scripts\drx_da_main.script:3232: attempt to call field 'nvg_glitch' (a nil value)
! [SCRIPT ERROR]: ...gamma/anomaly/bin/..\gamedata\scripts\drx_da_main.script:3232: attempt to call field 'nvg_glitch' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : E:\Anomaly-1.5.1\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...gamma/anomaly/bin/..\gamedata\scripts\drx_da_main.script(3232) : process_torch
LUA error: ...gamma/anomaly/bin/..\gamedata\scripts\drx_da_main.script:3232: attempt to call field 'nvg_glitch' (a nil value)
Check log for details```
and enabled the no BNVG patch
Solved, I have Arrival installed, and within the drx_da_main.script it would check if Beef NVGs is installed. I commented out the code in the script that did that, as all it did was provide compatibility with Beef NVG, which isn't installed anymore.
I can’t move my cursor to the second monitor when the game is in borderless mode.
Does someone experienced something like this before?
its been some days but i just got this problem, did you ever managed to fix it?
How do i check how many bullets are left in magazine?
I found the problem, I didn't know that certain scopes could zoom in using the mouse wheel.
thanks for the help
i got a little problem, i tried to activate Shaders and copied the bin folder from the Gamma path into the anomaly Folder but ingame it says "No effect files (.fx) in the effect search paths"
Any idea how to fix this? Game crashes when I try to equip AKS-74U "Tactician". Only extra mod I'm running is Black Market
I have problem with save. When i click it it shows this
It wont work after i update
hi yesterday i tried to update my game and launcher and i thought everything went well but i have noticed i only have 541 mods instead of 554 and when i start the game i get this error
Unfortun, i had to turn off a few conflicting mods
Hello. Got this error for whatever reason when I download any save. These are the mods I use.
!lam2
@granite laurel
- Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/addons/start/286029
- Place every archive you downloaded into
\GAMMA\downloadsfolder. Overwrite if needed. - Run the GAMMA Launcher
- Uncheck/Disable:
- Check MD5
- Force git download
- Click
Install/Update G.A.M.M.A.Let it finish then try to play.
Hey @real lava, I'm sorry in advance for the random ping, but I found a fix for the GPU Instance error, but I'm not sure if it works for you since I'm on integrated graphics
All I did was lower my VRAM from 2GB to 1GB and that was enough to bypass the GPU Instance error
I didn't notice it before since I recently reinstalled windows and for some reason my VRAM count was set to 256MB, so when I changed it back to my maximum of 2GB, there I experienced the GPU Instance error
🧐
let me know if it actually works
play some time
It's all the same for some reason. Did everything according to the instructions.
Ive been playing for a while now, approx. 16 hours, only now that I realized my VRAM wasn't set correctly, and there I got the GPU Instance error
16 hours is nothing
how long do you think it should be?
Oh so having the Integrated graphics on 2GB VRAM makes it crash?
So, I'm supposed to download the archive, then take those folders inside \GAMMA\downloads and do all other steps, right?
I guess so, Im guessing the last time I played was also set below 2GB VRAM during 2023 or before 0.9.4
Or "Place every archive you downloaded into \GAMMA\downloads folder." is about all the mods I downloaded?
After i uninstalled all my graphics driver and reinstalled i didn't have the error but i also didn't reinstall the AMD adrenalin software for my integrated graphics since i play with the dedicated GPU.
So i'm guessing if i reinstall it i'll have to lower the VRAM.
I dont think reinstalling the drivers worked for me, it was most likely when I reformatted my PC and ended up resetting the VRAM
Idk i did a clean uninstall of all my graphics driver and reinstalled them first via windows update.
I dont think I asked; what was the process of which you encountered the GPU instance error? Because for me I got it by just entering an already existing save
Yeah same.
Reinstalling the graphics driver worked for me for a time but the issue came back everytime.
But now that i did the process above doing a clean uninstall (with DDU) and reinstall i don't have that issue anymore.
Or at least it didn't pop up yet
do you remember anything else that you did after or before reinstalling the drivers?
Well it's just that on the nvidia control pannel i set my gamma(actually anomaly but yeah) execs to my dedicated GPU(that's an nvidia). And also after the reinstall i actually didn't reinstall the AMD adrenalin software for my integrated graphics.
Im not sure about this, but I think when you reinstalled the drivers, it might've fixed something related to your VRAM, and you only reinstalled drivers from your GPU right?
Can I actually know the name of your GPU? Or like the specific specs of it such as its VRAM
I'm gessing having the AMD software's optimized parameters is what makes the integrated VRAM 2GB which makes the game crash even if you aren't using integrated graphics?
It's an Nvidia 3060 Laptop GPU with 6 GB Vram.
in the control panel, are you able to see how much VRAM your system is using?
or in the windows settings menu, either way is fine
While in game or idle?
both will show the total VRAM that you can use
so either ingame or idle is fine too
Like this. It says "multiple GPUs installed btw"
okay so you are using the maximum amount, how long has it been since the last time you got the error?
well i haven't got it since like around 4 days.
My game actually had very few crashes lately.
What did you do to get 5 mods? (or is it filtered?)
i dont have 100tb ssd, i just want a beatifull anomaly
before those 4 days, you reinstalled the drivers right? and that led to fewer crashes?
Yes now i crash rarely, usually only sometimes on transition to another level but that was always the case i jut have to get back in and it works(sometimes there's even the autosave).
can somebody help me?
this is gamma support
not your own modded anomaly pack
okay, let me know if you crashed again, specifically the GPU Instance error, and when it does, try lowering the VRAM count if you can (I did mine in the bios)
пон пон
did you delete the shader cache?
yes
okay then I dont know lmao 
Hey, my game keeps crashing whenever I try to load in and this is the error message I get everytime, any possible ways to fix it?:
Guys, is vicious psi storm not working on gamma ? im trying to make it work, but it doesnt work at all, even if short psi storms is disabled
I had a fatal error crash report, says check log for details, could any one tell me whats wrong please 
Empty stacktrace... when did that crash happen? can you reproduce it?
if i remember correctly it happened when i press f to loot a body
!1873 // Make a backup before attempting the fix, type !backup in #🤖bot-commands
@red frost
- DO NOT EXTRACT
- Rename this file to
winchester_1892_billwa_stalker_anomaly-1.0.zip - Place it in your
GAMMA\downloads folder, replace files if necessary - Run
G.A.M.M.A. Launcher and disable:
-
Force git download -
Check MD5
- Press
Install/Update G.A.M.M.A.
Could be a random crash, they can happen sometimes 
Just try again.
okay thanks mate
Maybe incompatible 
Did G.A.M.M.A. just have to update and I'm incredibly fucking dense?
help pls
Turn off atmospherics and screen space shaders entirely, reinstall beef’s with the first option and the only ES no SSR options enabled. Reinstalled enhanced shaders with the corrected cube maps, fixed bloom, and no pbr options enabled. In game settings turn on SSAO at medium to get nvg’s to work
If you delete the shader cache and the game still fails to compile, turn off enhanced shaders and reinstall beef’s with only the first option enabled, then delete your shader cache and run it
That was not a fix for you @glossy pivot . Though i’d recommend posting your log file and extra mods so someone can help you appropraitely
!lam2
@glossy pivot
- Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/addons/start/286029
- Place every archive you downloaded into
\GAMMA\downloadsfolder. Overwrite if needed. - Run the GAMMA Launcher
- Uncheck/Disable:
- Check MD5
- Force git download
- Click
Install/Update G.A.M.M.A.Let it finish then try to play.
I got a Busy Hands Crash save....but the game didn't crash?
heyooo does anyone know how to fix my faint laser sight? only have these instaslled
hi can someone help me plz i tried updating my game and launcher a few times allready with my antivirus turned off and i have only 547 mods and i get this error every time i try to run the game
what to do
how do i find the Shader Cache so i can delete it?
!shader
@heavy verge To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
dum dum
don't at everyone
okay listen,my base gamma works,i made it work,but my old saves arent working
like i grinded so hard that i almost reached miracle
and i still have my save files but the game simply doesnt load em @verbal bay help lmao if u got any ideas
we're giving our Helpers a bit to rest

refuses to read
like i can link my save game file and u can check it if u want
Your old saves may be fucked, I already read the crash you posted.
I don’t have a fix for that either
damn,why does that happen man,like damn

what?what did i doo wrong
Hello everyone, is this the right channel to get some support for the game crashing on a new game start?
in case, I get this error when I am halfway into the loading screen after selecting the gear
Besides that, not much we can do
that one is locked for some reason
anyone have any suggestions to make the graphics better?
Yeah no shit
you can read the reason if you read
Click the damn message link
Launcher is broken now
Thats the fix for now, any other first start issues.. not much we can do
Wrong channel, ask #╟🔰☢newbies-chat
thanks I did not know that was a link to a specific message lol, I thought you linked the generic channel
How do i revert the main menu music to the previous one? Havent been able to figure it out
Hey everyone as the "base" channel is off, I'm asking there even if I didn't touch anything:
I'm having a bugged secondary quest, is there a fix for it?
!crashlog // i know its not a crash do it anyway
@wispy hemlock, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
this happened when i loaded in to a game this is only extra mods i have?
#🔨base-gamma-support read
so you cant help?
noone can, learn to read
Try this, just install like any mod and leave at the end of your list.
If that doesn´t work you need to start a new game.
ok i will try thanks!
!task // it doesn't log the task so not much else to do
@wispy hemlock Having problems with a certain task? #╭📖faq message
Alright, no problem! It just happened in the taskboard so, it's not too bad. Thanks for the help!
omg it actually worked thank you so much!
this came up after a little while but thanks anyway when i was in my game save
@verbal bay take a break seriously lol
You deserve it
You tried to install today right?
Then just wait until the launcher is fixed
like one day or 1 month
Await updates on the situation if only you've read a thing people told you to read holy shit
i have then i gave up then he helped me
your shit not gonna work, chill
but it worked when i made a new guy? just on that guy it didnt work
Eh.. well the fix for the powder worked at least 
Guess I´ll play some vidja games
any advice?
I supported Ascii on KoFi, anyone know how to update SSS to 24
if you scroll #🔨base-gamma-support those issues go in a loop you fix the powder there's another...and another...and another
the guy you just helped had several other issues before that
True enough
enjoy your vidya
It was the "waypoint" addon, I fixed it! Thanks again!
I've uninstalled SSS, ES, and Atmos, then reinstalled ES and Beef NVG so beef nvg still works. But it seems like my scopes are busted now?
On top of that, during emmision my guns look really bright
i think updating is busted rn
^
Well i fucked my install, time to play vostok 
You uninstalled SSS, ES, and Atmos, of course the game will be uglier!
more than ugly, im talking graphical glitches and issues
The guns being shiny I could see just being a side product and can't be helped. But 3dss scopes don't work anymore. I probably needed to install the vanilla 3dss scopes mod instead of the gamma one since gamma probably depended on SSS to be installed.
how do i get my game to not be overcast 24/7? i've used the debug mode to use the weather editor and nothing has clear weather
If I installed RE:DONE, do you know if it's possible to modify the NPC respawn rate? They reappear too quickly. I need to adjust the exclusion radius, right?
how do I fix this?
Retrogue's Weapons And Attachments\gamedata\scripts and here HIDE loadouts_injector.script
u mean delete the file?
Right click in MO2 and HIDE
oh ok sry this is my first time fiddling with mods
if I only have sound file then it is not fully downloaded or smth right?
You are in the wrong mod
oh ok I found it now it was the other one
yeah I still dont get it I only got these two
neither of these shows same screen as yours
The mod you show is the one installed by GAMMA, you installed another mod who give you this problem, Its RWAP
ohh oki
this right?
Yes, hide it
Also will want to hide this unjam_motion_mark.script in the same mod! It will conflict with GAMMA unjam
yeah I just found out while playing lol
this got nothing todo with my reload disapearing right? it just wont let me reload for some reason and the keybind for it is gone in the setting 🙁
So if I last played GAMMA over a year ago and want to revisit, and dont care about starting over, would I be better suited trying to update it, or just delete and reinstall from scratch?
right now wait to update/reinstall, there is a bug in the launcher
ah, darn
I downloaded the mod "Western Goods" and want to check if it works by going to the new NPC trader at the flea market, but I can't find him. Is he just difficult to find or did I download the mod wrong?
I could be wrong but if I remember correctly WG also allow a whole new options during installation to change or add some quests. Are you sure you didn't touch that specific option?
I think I found him
I'm pretty sure I read that he sells packages, so I guess that must be it
Well.. if you are sure no problem then 🙂
Thank you for the help!
My pleasure!
For some reason my gamma keeps crashing on launch. I installed a few new mods to add better grass and textures and that worked without any problems. But i just installed Arrival and deleted the shader cache to try some new hippo settings and now I cant launch the game. I even uninstalled arrival and replaced the shader cache w my backup. im genuinely so lost on what even caused this now
These are the new mods, all ive done aside from this was add then delete Arrival, and delete and restore the shader cache
I did the download/update option just now and then launched without AVX and i got passed the launcher, still crashed on my save file tho
Should be at the top priority. Also, it 100% requires a new save unless you remove DAO exactly as it says on the ModDB instructions
Arrival needs to overwrite almost everything depending on what other mods you're using
i removed arrival, so is there any way to repair my file?
I imagine adding DAO back on would make you able to play again
but there's only one way of knowing if your save is corrupted, which is playing
since DAO is in GAMMA already, should I delete whats there and just manually re-add the mod?
its still crashing on AVX, I just used the MO2 reinstall option for DAO, unless I was supposed to do it manually
yeah I'm getting this without AVX too, probably need a new save
Yeah, changing NPC models requires a new save.
i didnt even change npc models, does arrival do that?
Oh wait
You didn´t add KVMA or HD models?.. did you make sure your game worked before adding new mods?
yeah it ran with everything prior to adding arrival, KVMA is disabled bc of that crash since I tried installing it a while back and it didnt work
Okay just so I get this right, you tried to add KVMA (which needs a new save) but didn´t actually go trough with it?
You never had a save where you had that activated at some point?
And Dux´s character kit (and the mods depending on it) is activated?
didnt get to try it at all, i had it for 1 save, it crashed, so then I disabled it and its worked fine since, I added the mods from that screen shot, it ran fine, then went back to add arrival to make anomalies more visible, deleted my shader cache, and now the game wont even launch on AVX, and can load to the main menu on non AVX but will crash when loading a save w that error. Also, just checked and Dux is installed and enabled so im rly confused
sorry ab how convoluted this is, i did multiple adjustments to my modlist and idk which one caused the issues
!dickcast // Uh try that.
@runic flint
If your game crashes with errors like: sim_default_zombied_0, 1_1.ogf, or similar ones dick/sim — then do this:
#🔨base-gamma-support message
well i think i found the problem, i tried reinstalling like the guide said and it says "installation folder no longer exists"
!backup // In that case make a backup
@runic flint
Follow this to "save" your settings and keybinds before updating: #╭📖faq message
And if you want to keep your personal mod list between updates, follow this: #╭📖faq message
Then type !dick in #🤖bot-commands and follow that.. you may also need to update your launcher type !v8 there.
yeah its still crashing, idk why
i cant get passed the launcher for AVX, it starts then crashes after a few seconds by just cutting to desktop with no error code
Then don’t use avx
Apparently they get to main menu on non-avx but crash on save load
OH WAIT ITS WORKING
i fixed the model crash issue so its running now on non AVX, i just hope performance will be fine

Yeh, I already tried fixing that with !dick and the new launcher
Oh
Seems to have worked
Nice 
thanks so much!
!avx // read this (for me it made no difference on avx or non avx)
@runic flint Actual explanation at the bottom but simply put:
Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.
Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.
You can also follow the !stutter command to get a bit of performance.
Type it in #🤖bot-commands
Well according to CnR, executables don't support AVX anyways, they're not built with that capability
i have a good cpu but its a little bricked rn and i need to replace it so it could be causing crashes, idk if it was on avx prior tho so thats where the confusion was coming from
Huh okay
regardless the game is running again, so thank you for all the help!
No problem
anyone able to help me? whenever i try to launch with RWAP installed it wont let me launch and this appears in the log
!rwap // Check pins of that thread.
@elder cedar REREAD THE INSTALL GUIDE FOR RWAP #1036727845726204024 message ⠀
with MT branch, it says to set blur radius to 5 to avoid some clouds of light. i still get some with sights like this. is this normal?
the loadout order was wrong too for me but now it is fixed, thank you!
shoot now im getting this error, the game launches fine but whenever i load into a save the game crashes and gives me this error
i cant find the uni_anim_core script in the gamedata file for the RWAP mod either
!getjam
@elder cedar , follow instructions:
- Download the archive https://cdn.discordapp.com/attachments/928715640968212582/1266326376223608915/Universal_Animations_2.7z?ex=695249d7&is=6950f857&hm=d3c1f10732d466fb36fb80b75e5c46a2ea248b7a0c033aa287c5f1c60b6a9188&
- In MO2, press
Ctrl + M, choose that archive, install it, enable that addon.
Make sure that addon has the highest priority (it should always have the highest priority number)
- Enter the game.
ok got it working now
hey i just updated the game amd now it crashes on start up
how can i fix this?
i have no clue why im not getting a crash report but i am getting the crash noise
i have blur radius set to 5
this happens right after pressing play
does anyone know what mod exactly causes this?
!aoe // same reason why your game crashes on transition 20% of the time actually
@raven sleet
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
@raven sleet
mt branch
i didn't have any engine modifications when i mentioned the crashes, unless they were installed years ago or something as i have zero recollection of that. i just installed MT branch, following the guide, but it looks like when i hit "default," it reset everything rather than just the blur radius i'd changed
yes that's what the default button does
!mcmspec
@raven sleet
Follow this: #╭📖faq message
Honestly .. since your issues come from MT test better ask or search trough that thread for it in #1035807043933720576
it's looking fine now, i'm just trying to see if i changed any other visual things in SSS, but i don't think so. is volumetric being forced on fine?
Shouldn´t break anything at least
thanks
how do I fix this?
this makes things way harder lol. i cannot for the life of me find the values i'm looking for, but the game look good ig, so it's fine.
i tried adding sidearms expanded and game wouldnt load on dx11, but loads in dx9 but crashes when actually trying to load a save due to this
is it just a matter of reinstalling gamma through the launcher to get the correct file or is it something else
delete shader cache

