#πŸ”¨base-gamma-support

1 messages Β· Page 294 of 1

spark python
#

okay, then do the full installation again then.

hollow coral
wheat gazelle
#

keep getting a red X stack trace about an SR1M magazine after leaving the area i dropped ALL of my mags in, and unloading the mod and putting Unjam Reload back on

barren galleon
#

Thanks for the hit V tip, was having the same issue...was legit unsure if I needed new eyes because it did not look like 3.5x

hollow coral
#

I understand that no one can help me with my problem....

tender forge
hollow coral
#

And the folder with the game should be placed in the folder with the mod, or is there no difference?

#

Maybe that's the problem?

spark python
#

Anomaly and Gamma should be placed in separate folders on the root of the same drive, at least that is how I do it

spark python
hollow coral
#

358-mods-in-mo 2. Is this the file?

gaunt berry
#

Hey guys, I got a bit of a problem, when I died my FoV changed to 44.5 or something like that. Alright, no problem I thought, I just set it back to 80, except the viewmodel on every weapon is still very zoomed in. It's rather annoying and I've been through all of the settings trying to find out what could remedy this but to no avail

tender forge
gaunt berry
hollow coral
hollow coral
tender forge
#

idk, because i don't understand your problem right now after a series of frustrated replies KekSkew
you have it all installed, but mo2 shows ❌ on a mod/mods... correct?
how many mods have the ❌?

(moved to ru support)

rotund fog
#

OK all the changes worked, thanks a lot to you guys!

violet tartan
#

Hello, I would like some help in resolving this issue. I’ve followed the installation instructions, but when I attempt to start a new game I receive this error message.

arctic sphinx
#

Is there any reason not to enable "Mystery of the Zone?"

spark python
violet tartan
tender forge
violet tartan
long prairie
violet tartan
wheat gazelle
#

I require assistance

violet tartan
violet tartan
wheat gazelle
#

(ive unloaded the mod and made sure my inventory is empty)

violet tartan
long prairie
#

40 or so minutes. Or you could use a VPN to go around that

keen cedar
wheat gazelle
#

fuuuuuuuuuuuuuuuuu

#

any way around it?

keen cedar
#

!mags you can use the script

raw raftBOT
#

In order to properly enable Mags Redux:

1) Enable Mags Redux (Disable G.A.M.M.A. Unjam Reload) (the mod under "Optional")
2) Disable G.A.M.M.A. Unjam Reload on the same key (yes it's a mod, no it isn't a keybind)
3) Enable Ammo Check (this is a mod as well)
4) While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
5) After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
Bonus: You can also enable Mags Buyable at Traders if you want, it's a mod already inside your mod list.

KEEP IN MIND that once you enable Mags Redux, you can't just disable the mod in your current save file and call it a day. Your game will crash. To remove Mags Redux you'll HAVE to remove them from your save file with this addon, follow EVERY STEP: <#πŸ–‡old-mods-posting message>

wheat gazelle
keen cedar
#

me too, and that's why i don't play mags redux

#

anyway use that method at the bottom of the bot command

wheat gazelle
#

it worked thx :)

white patio
#

Got this error message yesterday, any ideas?

arctic sphinx
#

Are important NPCs smart enough to not wander around in emissions with "NPCs Die in Emissions for Real" enabled? I like the idea of the mod, but I don't want to fuck up quest progression over it.

latent viper
#

Do I need a fresh game for hd models to work?

prime fulcrum
narrow sparrow
slender island
dawn willow
#

Been at this screen for a while, does this mean it is working?

sharp bough
dawn willow
#

life 4 minutes

sharp bough
sharp bough
dawn willow
#

ok ok cool

#

I think my excitement is just making me impatient

slender island
sharp bough
slender island
#

okay thank you

#

do I reinstall using Mo2 or is that somehow done in the organizer?

barren salmon
#

hey guys, step 7 of the install says to click browse to show it to the anomaly folder but there isnt a browse button...

barren salmon
#

like im not wearing my glasses but I cant see one

sharp bough
barren salmon
#

oh okay so by ignore the message you actually mean click ok........... gotcha

#

which is not ignoring it

#

my mistake

prime fulcrum
white patio
#

@prime fulcrum @narrow sparrow I did the "skyrim" technique by disabling every mod that I recently ticked and it fixed it, it was "maid's icons" thanks for the support πŸ™‚ ❀️

prime fulcrum
harsh basalt
#

Anyone in chat to help with install?
For Grok's Automated Modular Modpack for Anomaly Installer, it's giving me an error when I show it the Anomaly folder, saying "The folder A:\Anomaly does not seem to contain a game Mod Organizer can manage."

sharp bough
harsh basalt
#

I've tried both

tall charm
#

did a CClean, reinstalled all the driver. Boom everything works now, dead city runs like butter now haha

harsh basalt
#

It looks like it's only showing games on my C:\ drive and not recognizing the game is installed on my A:\ drive...

keen cedar
#

also, is GAMMA also on A:\ drive? Because if Anomaly is there, GAMMA should be there too

harsh basalt
barren salmon
# prime fulcrum it is

It just isn't haha, Ignoring something is.... ignoring it. Not actively interacting with it. Don't get upset over a poor instruction instead just correct it. You'll see an error message, Click ok, Then browse to folder. How hard is it

stone spade
#

got this when walking onto the start of a dirt road, tried to walk down it again and it happened a 2nd time

vast wigeon
#

can someone hop in a call and help me?

stone spade
dawn willow
sharp bough
sharp bough
stone spade
#

@sharp bough

dawn willow
sharp bough
# dawn willow

Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN. Then run a full install.

FULL INSTALL:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
#

@stone spade Do the same this

stone spade
#

Alright

dawn willow
#

What is mirror 127 128?

sharp bough
vast wigeon
#

When i click Launch MO2 in Grok's Installer, it didn't do anything, anyone know a fix>

dawn willow
#

shit I already hit install

#

do I have to wait for it to install then go back and do it again?

#

or can I cut it off early

arctic sphinx
#

Where do I find explanations for what the hud status symbols all mean?

timid bridge
#

I dont know if you fixed this yourself already, but I had this exact same issue just now. What fixed it for me was disabling Jaku's Improved Shaders and deleting the shaders_cache again. ;)

undone crater
#

Hey everyone. Steam Deck user here, I’ve installed multiple times following the Steam Deck specific instructions to a tee. The game launches and runs but freezes for about 7 seconds at a time at a varying interval. It’s unplayable in this state. I installed the game on an external Windows drive and it works great. Anything I could be missing to get it running on Linux?

fallow night
#

I'm in the mid/late game returning to Cordon and getting a CTD every time. I tried the only fix I could find on the disc about this error and it didnt work its the command that says !.K98 or something, about copying the bin/appdata folders from gamma to anomaly. The error reads Fatal Error, no expression, motions_value::load, skeletonmotions.cpp, line 163, old skinned model version unsupported! (actors\stalker_soldier\1_8.ogf)

#

I can post screenshot if u want

#

if anyone can help that would be tremendous I'm many hours deep

radiant kayak
#

hey, guys, i'm on professor kovelov's questline, and one of those involves getting his laptop and then picking a sample from the bearclaw anomaly. Only problem is, the sample doesn't spawn.

mossy cypress
#

Quick question for anyone, I've played alot of STALKER ANOMALY but not GAMMA, is there a way to disable the "only allowed to sleep when tired"?

glacial bear
#

Trying to install sidHUD right now all i got was this so far kekl
Need help please keksip

brazen estuary
#

Anyone got their original copies of the GAMMA execs?

#

I installed modded exec and I don't like the default splash screen.

pastel garden
#

ΓΊhhh my game keeps crashing

#

before i even load

raw raftBOT
raw raftBOT
#

What "vanilla" means for G.A.M.M.A.:
Vanilla G.A.M.M.A. is considered to be the G.A.M.M.A. modpack as it comes. This means you have #πŸ“577-mods-in-mo2 and have not enabled or disabled any of those, have not enabled any animations in MCM, and have not added any mods of your own.
If you're seeing this, it's because you're posting in the wrong channel. Go ask in #πŸ”¨modded-gamma-support.

fallow night
prime fulcrum
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

fallow night
#

I have stutter fix and foliage AI fix enabled

prime fulcrum
fallow night
#

AI cant see through foliage I think its called

#

no flags, do I just do a full install 😦

#

I haven't changed anything since earlygame so idk what happened

#

"GAMMA NPC's cannot see through foliage" under "GAMMA fixes"

clear prairie
prime fulcrum
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

fallow night
clear prairie
#

Try that for now if it doesn't work I'll help more when I'm not in bed sleeping

mossy cypress
#

@prime fulcrum Thanks I disabled the 3 mods so I can sleep whenever now thanks!

buoyant sun
#

hello, im doing the framerate optimisation steps and i got this

#

can anyone help, i have good pc, and i cant play with good fps

#

im sure i can run the game with max graph, but i dont know how

#

if anyone can help, i can share screen

#

im trying to play for 2 days xD

#

i can see people play the game with good graph, but mine looks like a potato

#

and bad fps

prime fulcrum
neon heart
#

last time i downloaded gamma there was a file called 'gamma addons downloads' is this not needed anymore

heady steppe
#

is there a way to retrieve NPCs when they got eaten by the void after a crash?

#

like their solid model is there but they arent visible and interactable

static tartan
#

Markov told me to find 3 artifacts in WT. I found 2, they were both marked. 3rd one is not marked and i cant finish the quest.

silver plover
#

i was optimizing fps now my game wont start, can somebody help me pls?

brazen dragon
#

Expression : <no expression>
Function : CScriptEngine::lua_error
File : ..\xrServerEntities\script_engine.cpp
Line : 191
Description : fatal error
Arguments : LUA error: c:/anomaly\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)

stack trace

#

Anybody know how to fix this?

supple spoke
#

So I got a mission to collect x5 rifle cleaning

#

I bought it, and it told me to "turn in for rewards"

#

went to the guy and he showed no options for "the job is done"

#

is there any way to clear it through debug or something?

brazen dragon
prime fulcrum
raw raftBOT
#

YOU'RE NOT PLAYING ANOMALY VANILLA. THIS IS A MOD PACK, REMEMBER?
Don't verify stuff with the Anomaly Launcher, you're using Mod Organizer.

serene wedge
#

G'day, folks! Hope this is the right place to ask this: it's been a couple of months since I last played GAMMA (or Anomaly and Stalker in general) - I've still got the original installation which was working perfectly, no issues on my part - and I was wondering if I should follow the "update" steps or if I need a new, clean installation having passed so much time. Thanks in advance for any reply!

brazen dragon
#

Now im getting this

willow hawk
#

!152

raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

raw raftBOT
#

1) Grab the latest installer: <#πŸ“’announcements message>
2) Open your GAMMA folder
3) Open .Grok's Modpack Installer, it's a folder inside your GAMMA folder
4) Paste the installer called G.A.M.M.A. Installer.exe in here and overwrite
5) Launch it with admin rights
6) Click on Download GAMMA data
7) Click on Full GAMMA installation
8) If you already did two Full GAMMA installations, wait at least one hour or you'll be blocked

serene wedge
sleek wigeon
#

how to reload without enabled mags redux, R did not work

fathom cedar
#

Hey so I wanted to update my game and I preformed a download gamma data and install gamma addon only then I did the check md5 thingy is my game up to date now?

weak fulcrum
#

i dont know where else i should ask this quick question, but is it safe to download gamma on a fresh anomaly install when theres another anomaly install with a existing modlist on my pc somewhere? or do i need to remove all traces of anomaly and make sure theres only 1 anomaly folder before setting up gamma that is completely fresh.

if this is not the right channel to ask this il delete this message and move to the right one.

west lotus
#

can someone help I only have 357 mods installed

lapis silo
weak fulcrum
#

il do that once i finish installing gamma

#

i have slow internet, like 2mb/s on browsers so this will take like, a entire day

lapis silo
lapis silo
# west lotus

you have a red cross and are missing mods, if you recently clicked "full install" in the gamma installer, wait for an hour and try again

west lotus
#

goddamnit

weak fulcrum
#

im just trying to find a good time to start the download so i can download it in one go to avoid breaking anything

lapis silo
fathom cedar
lapis silo
#

servers are really busy during the day

west lotus
lapis silo
lapis silo
narrow mirage
#

Having an issue when trying to start a new run. Game crashes when loading after picking starting faction and equipment.

long axle
#

Im not sure if this is the right chat for it
But im wondering if its fine to activate the deactivated gamma mods and would it be possible to install reshade and is the method any different than normally downloading reshade, and there are two version of reshade no idea which to download with or without full addon support

#

speaking of actualy support, im tryna start the game haven't activated or deactivated anything

#

yet when i click play

#

it just crashes, no error no nothin

west lotus
#

the installer console just gave an error

#

unexpected archive end

#

the kriss vectors upper reciever textures failed to download

#

great

smoky chasm
#

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CInifile::Load
[error]File : Xr_ini.cpp
[error]Line : 789
[error]Description : fatal error
[error]Arguments : Attemped to override section 'coffee_drink', which doesn't exist. Ensure that a base section with the same name is loaded first. Check this file and its DLTX mods: c:/stalker anomaly/bin/..\gamedata\configs\system.ltx

stack trace:

#

all 359 mods installed no idea how to fix this, game wont even launch. game has been updated to 1.5.2

#

thats the error log when trying to launch the game^^^

raw raftBOT
#

Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #πŸ€–bot-commands)

What about animations? Can I enable them?

DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.

Why do we have these mods in the mod list if we can't activate them?

Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.

If you really want to use stuff that is disabled by default, forget about #πŸ”¨base-gamma-support, use #πŸ”¨modded-gamma-support instead.

prime fulcrum
raw raftBOT
#

You'll need to delete your Anomaly folder.

  1. Open your Anomaly folder, if you have any save files you want to keep, take them from this folder: Anomaly\appdata\savedgames
  2. Delete your Anomaly folder
  3. Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send !152 in #πŸ€–bot-commands)
  4. Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#πŸ“’announcements message>)
  5. Click on Download GAMMA data and then click on Full GAMMA installation
deft slate
#

Crash when loading the save,try Full installation 3 times in GMMA Installer with admin,should i try more?

narrow mirage
prime fulcrum
raw raftBOT
#

You'll need to delete your Anomaly folder.

  1. Open your Anomaly folder, if you have any save files you want to keep, take them from this folder: Anomaly\appdata\savedgames
  2. Delete your Anomaly folder
  3. Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send !152 in #πŸ€–bot-commands)
  4. Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#πŸ“’announcements message>)
  5. Click on Download GAMMA data and then click on Full GAMMA installation
cobalt dew
#

Hi !Am i missing something

#

?

prime fulcrum
cobalt dew
#

can't navigate on website :/

west lotus
#

or 39 minutes as it says

serene swallow
west lotus
#

okay my install is stuck at gamma large files re downloading assets

raw raftBOT
#

https://github.com/Grokitach/gamma_large_files_v2
1. Go to your GAMMA RC3/downloads and delete gamma_large_files_v2 and gamma_large_files_v2.meta if you have it
2. Download the file from Github. Make sure it's called gamma_large_files_v2 and NOT gamma_large_files_v2-main, rename it if it has "-main" at the end
3. Make sure that the very first folder inside the zip is named gamma_large_files_v2-main and not gamma_large_files_v2
4. Drop the downloaded zip in your GAMMA/downloads folder AND DO NOT EXTRACT
5. Launch GAMMA installer as admin
6. Click the Download G.A.M.M.A. Data button
7. Click the Full G.A.M.M.A. installation button

deft slate
clear prairie
deft slate
#

Just try Full installation just now and run it again,still the same error

clear prairie
serene swallow
#

Error I get

deft slate
#

So i should keep trying full installation after the block done?

clear prairie
serene swallow
#

I am, actually DX11 AVX

#

haven't changed it

clear prairie
serene swallow
#

Roger

deft slate
#

yea without avx directx 11

#

try dx8 with turn off the mod that told in channel faq

clear prairie
deft slate
#

ok

clear prairie
deft slate
jagged juniper
#

Someone said hk416 is disabled due to bad animations. How can I turn it back on to spawn to NPCs?

keen cedar
jagged juniper
#

okay

long axle
#
  1. Can i download Reshade
  2. Im tryna start the game haven't activated or deactivated anything
    When i click play it just crashes
#

No error doe

full cliff
#

Quick question. Which mod handles the radiation in the enviromental water?

prime fulcrum
prime fulcrum
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

deft slate
#

Crash at the loading screen

summer night
#

hi people dunno if it's the right channel for that but how do you install the new version of reshade the game isn't listed so do you just select the anomaly launcher?

keen cedar
#

ignore it, not needed

summer night
#

oh ok i was wondering since it saied to update to the new version everytime i launch the game thx

worn kite
#

all npcs in my game all of a sudden have a very high or low voice, i have no idea how kekw

ornate granite
#

Using google translator for this and a little bit of my knowledge so sorry if I sound too artificial

Btw, I'm here reinstalling gamma for the 2nd time, but it seems that whenever I download gamma data in the installer it simply hangs, and doesn't load, I left it charging for 2 hours (almost that) and it didn't load, it could be my pc making the installation take time or something else?

lunar stirrup
#

Can someone help me when I turn on the night vision and put the gun sights the game closes !

long prairie
raw raftBOT
#

If you're crashing with the following error: gamedata\scripts\z_beefs_nvgs.script:561: attempt to call method 'GetZoomType' (a nil value)

  1. Make sure you have the latest G.A.M.M.A. installer, version 3.8. If you don't have it: #πŸ“’announcements message
  2. Open the installer with admin rights
  3. Click on Download GAMMA data
  4. Open your GAMMA RC3 folder
  5. Go here: .Grok's Modpack Installer/GAMMA/modpack_patches/bin and copy-paste the .exe files to your Anomaly folder inside the bin folder
sleek wigeon
clear prairie
uneven idol
#

Hello everyone, I am fairly new to this game. In MCM and regular settings, I don't know what I should and should not mess with. I just want backpack opening animation and item usage animation. FDDA Settings in MCM config has only two options available enable & debug.

left elbow
#

I've got a super strange issue, my framerate is fine but my character is lagging, like he's on ice and dropping frames, kind of like I'm in a game with high ping, it also effects my cursor where it'll jitter around the screen and make it really hard to aim. Started happening in the swamps hasn't gone away since

lunar stirrup
long prairie
torn rain
#

Guys sorry to ask but can we change FOV mid games and how? Thanks

clear prairie
lunar stirrup
clear prairie
#

!nvg

raw raftBOT
#

If you're crashing with the following error: gamedata\scripts\z_beefs_nvgs.script:561: attempt to call method 'GetZoomType' (a nil value)

  1. Make sure you have the latest G.A.M.M.A. installer, version 3.8. If you don't have it: #πŸ“’announcements message
  2. Open the installer with admin rights
  3. Click on Download GAMMA data
  4. Open your GAMMA RC3 folder
  5. Go here: .Grok's Modpack Installer/GAMMA/modpack_patches/bin and copy-paste the .exe files to your Anomaly folder inside the bin folder
long prairie
wide lagoon
#

no hud what is command

long prairie
raw raftBOT
#

Can't see the HUD anymore?:
Press Numpad Enter if you can't see it at all.
Or press H if you can see something but not everything.

Your HUD looks strange?:

  1. Load a save before this bug happened.
  2. Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
  3. Press H on your keyboard.
  4. You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
wide lagoon
#

thanks

long prairie
#

check pins in #πŸ€–bot-commands next time you need an existing command

wide lagoon
#

alright

violet tartan
lunar stirrup
minor bolt
#

yo what do i do if my pc falls asleep while installing? like a couple of the downloading mods gave me errors

#

is there a way to repair without reinstalling the whole thing

narrow sparrow
minor bolt
#

ohh i will try that after other mods finish downloading

#

thank you very much

solar kraken
#

heya, which file to remove to disable the visual noise from radiation?

long prairie
#

iirc you can do that somewhere in the visual options in the ingame menu

#

look in UI/Hud/Player

solar kraken
#

that option is turned off by default in fresh gamma, it isnt that one

proven basin
#

render model pool cpp fail, what is that

urban pelican
#

please help

weak fulcrum
#

okay... gamma is installing, anything i should watch out for during the installation?

lofty hedge
#

So I took a tracking quest from the professor in Yantar to collect a tracker from a dog.. I killed and skinned the dog but it did nothing to the quest and upon returning to the professor there is no option to abandon the quest... the heck do I do?

proven basin
minor bolt
#

yo my installer is stuck on creating a short ct

#

can i just stop it at this point?

long prairie
raw raftBOT
#
  1. Download the old BaS version:

Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z

2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
4) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
5) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
6) Paste the gamedata folder inside this newly created folder
7) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
8) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons

If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.

robust breach
#

anyone know how to fix fatal errors on first load for new game?

#

i keep getting one

weak fulcrum
#

i can safely cancel and resume the installation process, right?

junior moon
robust breach
#

and no m02 says everythings fine

junior moon
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

junior moon
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

robust breach
#

weird i updated before install

junior moon
#

Might have done it wrong then

robust breach
robust breach
urban pelican
#

what do I do with this?

robust breach
#

im struggling

#

i already know you gonna need this idk why this just wont work for me lol

tender forge
robust breach
tender forge
#

Ah yes, blind
Under the flags tab, do you see a lot of ❌?

robust breach
#

nvm theres only like 2 not flagged

tender forge
# robust breach nvm theres only like 2 not flagged

You got flagged by moddb.

Check if you are blocked from accessing https://www.moddb.com/
If yes then wait for the indicated time + 40 minutes.
Or use vpn.

Then do exactly this:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Change ModDB download mirror from Default to 128 or 127
  5. Click "Full G.A.M.M.A. installation"
    Don't delete anything
slow delta
#

This happens everytime I try to load a save. What is the fix?

raw raftBOT
#

Change to DX11 or disable the 282- GAMMA Loading Screens - CS Eden mod in MO2

robust breach
urban pelican
#

Can anyone help me with this? It happens when I create a new game

tepid garden
#

anyone know why rain is so quiet?

#

i've reinstalled my game before and i haven't added that many mods, yet my game still has this problem

#

i've only added 1 mod which is a mod that makes it winter, but i had it way before i added this mod

#

most of the time i can't even hear the rain, other times it's very very faint but i still hear thunder

slow delta
harsh basalt
#

Expression : I
Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7b281b7aba5>::()::<lambda_00202d6eeafb6968914ca7e0e4d804d3>::operator ()
File : Xr_ini.cpp
Line : 332
Description : Can't find include file:
Arguments : sound_layers\wpn_AR_sounds.ltx

stack trace:

#

anyone know why when I launch this comes up?

#

359 mods are active

tender forge
#

You're not showing the important part.
Aka your mo2 being filled with ❌

tender forge
# harsh basalt Expression : I Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7...

Check if you are blocked from accessing https://www.moddb.com/
If yes then wait for the indicated time + 40 minutes.
Or use vpn.

Then do exactly this:

  1. Disable antivirus temporarily

In Windows Defender, add Anomaly and Gamma folders to Exclusions
windows security > virus & threat protection > manage settings > exclusions

  1. Open GAMMA installer as admin
  2. Click "Download G.A.M.M.A. data"
  3. Change ModDB download mirror from Default to 128 or 127
  4. Click "Full G.A.M.M.A. installation"
    Don't delete anything
tough stirrup
#

I don't know why but when I press RUN nothing happens I hear a sound and that's it ;/

static gust
#

Can someone help with fatal error 204?

#

Happens during saving

raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

tough stirrup
#

Works! Thx you ❀️

static gust
static gust
tender forge
tender forge
# static gust

Check if you are blocked from accessing https://www.moddb.com/
If yes then wait for the indicated time + 40 minutes.
Or use vpn.

Then do exactly this:

  1. Disable antivirus temporarily

In Windows Defender, add Anomaly and Gamma folders to Exclusions
windows security > virus & threat protection > manage settings > exclusions

  1. Open GAMMA installer as admin
  2. Click "Download G.A.M.M.A. data"
  3. Change ModDB download mirror from Default to 128 or 127
  4. Click "Full G.A.M.M.A. installation"
    Don't delete anything
static gust
junior moon
raw raftBOT
#

If you want to back up your saves:

  1. Go inside your Anomaly folder
  2. Open the appdata/ folder
  3. Backup the folder called savedgames
tender forge
raw raftBOT
#

"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #β•­πŸ“–faq message

static gust
#

thanks for help

north lintel
#

Does anyone know how to enable the Steam overlay for GAMMA? I tried this: #β•­πŸ“–faq message but all it does is add the organizer to Steam, it doesn't seem to add GAMMA to Steam or enable the overlay.

patent gust
keen cedar
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

distant plover
#

So I’ve recently experienced two CTD in a session and also I’ve been noticing a lot of stutters when going in or out of pda or inventory menus, or even just wandering around. I enabled the stutter fix in the mod manager and it doesn’t work. Any idea how to fix the stutters and CTD?

sudden oyster
#

is there any fix for the defend the pump station quest? i crash everytime i get a bit too close to it

rare crater
#

I also occasionally crash to desktop unexpectedly and it doesn't seem like anything specific causes it, any idea for a fix ?

narrow sparrow
#

Disable Beef's nvgs Mod from Mo2

narrow sparrow
calm patio
#

When the downloads get to Weapon Parts Overhaul, the installer straight up dies.

tough stirrup
#

Why is the fog so close that you can't see far away?

rare crater
narrow sparrow
keen cedar
#

*Anomaly/appdata/logs

rare crater
#

cool thanks, i'll send one the next time i crash

calm patio
#

Guys, I think I figured it out. Ain't got no damn space left, lol.

robust breach
#

what mod is the mini map under i wanna turn it off

long prairie
robust breach
toxic remnant
#

Can i use MXOA in a way without fking up my scopes?

summer oyster
#

ive just started a new character cause i finally figured out how to manage the settings in a way that fits how i'd like to play, but what ive noticed is that i loot mutants pretty fast, almost like if ive kept the achi bonus from my prev play. and i also have my animations break sometimes, well quite often actually, it just doesnt play things like disassembling or repairing stuff, if i save and reload it gets fixed but happens again later. anyone know what might cause these and how to fix? PS.: i also changed abit in my mods list but those mods arent related to these parts of the game.

patent gust
#

why are my scopes yellow?

tropic fox
#

game was fine yesterday now im getting a fatal error line: 183

#

says description assertion failed

long prairie
raw raftBOT
#

This command is specific for a specific kind of crash, but it's good in any case to remember an important lesson:

If you enabled ANY FDDA animation, turn them all off.
Yes I'm talking about backpack, crouch, mutant loot and items pick up. It's causing your crash. I don't care what you think it is, it's FDDA. Turn that shit off.

The only thing you can keep enabled is the first option: Enable FDDA animations

long prairie
#

Not for crash but all those animations are breaking your game

#

Did the wrong bot command yep do busyhands in #πŸ€–bot-commands for a proper explanation of why anims need to be off

long prairie
summer oyster
# long prairie !fdda also extends to animations you can enable through ]

i dont think any of these have any animations tho... or do they? which can be it?

DLTX:
-Mystery of the Zone - ON

Minimap:
-Switch to compass

Good addons with bugs:
-Companion inventory - ON

New addons:
-Simple Autumn no leaves - OFF
-Gardener of the Zone - OFF
-Grulag's Dead Bushes - OFF
-Autumn no leaves LOD fix - OFF

GAMMA fixes:
-Stutter - ON

GAMMA disabled:
-Chimera growl - ON
-Companions carry weight - ON

#

ive saved my changes in a txt in case a GAMMA update comes out sxhLUL

spark python
patent gust
#

restarted the game

tropic fox
#

i dont know how to fix this failed assertion

#

says the file is skeletonmotions.cpp

queen tide
#

help me please lmao

tender forge
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
tropic fox
#

which installer is too be opened?

#

ah nevermind

#

still wont let me in

tender forge
long axle
#

Can you download reshade and if so how (if its any different then downloading normal reshade)

tender forge
#

reshade is already included with the gamma

distant plover
narrow sparrow
tropic fox
vivid bane
#

currently downloading all the stuff thats needed for the Gamma and the download speed should be this shit?

#

i normally get 10mb/s

#

nothing wrong with my wifi

#

works fine

pallid dune
#

!faction

distant plover
narrow sparrow
raw raftBOT
#

You'll need a torrent client, I suggest qbittorrent https://www.qbittorrent.org/
Once downloaded and installed, open it and go to File > Add torrent link… and copy paste the torrent links in the text box

This is the official torrent for Anomaly 1.5.1:

magnet:?xt=urn:btih:c307c208636d1fd98ca4fe70ca0c692035659855&dn=Anomaly-1.5.1.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce

This is the official torrent for Anomaly update 1.5.2:

magnet:?xt=urn:btih:06580e9c871086d5b847a84940bd89b6d97c975f&dn=Anomaly-1.5.1-to-1.5.2-Update.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce
vivid bane
#

how do i use torrent

#

tried once and cried

#

tf is ISP 😭

#

man i just want to play gamma

#

oh

#

im from poland

spark python
#

depending on what you torrent though i guess

#

my friend got in trouble for torrenting stuff

tropic fox
#

i just don't know what's happened it was fine yesterday now this

vivid bane
#

i mean im just downloading a mod not pirating a game

#

dont see what trouble i could get into

spark python
#

didnt mean to reply to that

vivid bane
#

im scared what do i do

spark python
vivid bane
#

on steam like 10

narrow sparrow
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

spark python
#

and then when you figured it out, then download the torrents

vivid bane
#

i have to download both anomaly versions?

spark python
vivid bane
#

so which one do i download

distant plover
# narrow sparrow !full do the steps below

Thank you so much. Also any fix for the glitched cursor when going into workbench? When I go into any workbench item, for example yesterday I was trying to make a tool but my cursor was glitched and giving me a description of another item in my inventory and when I try and click an item in my workbench it doesn’t work. If that makes sense

vivid bane
#

1.5.1?

tropic fox
#

might just redownload it all

spark python
# vivid bane 1.5.1?

yeah. Anomaly 1.5.1. is the base. and the 1.5.2. is the update files you need to download to overwrite the 1.5.1.

vivid bane
#

so to run gamma i need both 1.5.1 and 1.5.2?

#

or im just stupid

raw raftBOT
spark python
dusky kayak
#

Hey, not sure if this is the right place to ask, but would it be possible to migrate the main Anomaly folder to my SSD, but leave the GAMMA RC3 folder where it is now (on a HDD)? Would this cause any problems other than needing to show the mod manager the new Anomaly folder? Or would i have to do a full GAMMA installation again after moving the Anomaly folder?

distant plover
spark python
tropic fox
#

please someone help

dusky kayak
vivid bane
narrow sparrow
tropic fox
#

359 mods

#

1 red X next to gunplay

#

mp7 reposition

#

now getting this

minor bolt
#

How do I stop my game from stuttering every 30 seconds

tropic fox
#

turn that on

minor bolt
#

Oh wow

#

Why isn't that on by default lol

heady gazelle
#

Hi

#

I installed gamma and it runs just fine

#

But

#

I have some problem with npc spawns. I mean, they don't spawn at all. They spawn at bases, or objectives. But for example on the road to disable the brainscorcher. Where previously there was, a lot of monolith troops. Now there are just basic zombies, and like few of them.

#

Anyone had that problem?

#

I tried tinkering with options but no luck so far. :/

#

Even the game runs smoother like there is not much going on, on the map.

tropic fox
#

uggghhh i just want to play again

prime fulcrum
raw raftBOT
#
  1. Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on Download G.A.M.M.A. data and then Full G.A.M.M.A. installation)
  2. Bring your modlist back to default (type !default in #πŸ€–bot-commands)
  3. Enable the "Turn this on if you stutter" mod in your MO2 (you can found the mod under the G.A.M.M.A. Fixes separator)
  4. If you have a NVIDIA GPU, you can enable Triple Buffering in NVIDIA control panel
  5. Open Anomaly Launcher via MO2 and tick Prefetch sounds
  6. If you have a beefy GPU, use Anomaly (DX11)
prime fulcrum
tropic fox
narrow sparrow
heady gazelle
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

tropic fox
#

i did that it was close to letting me in and got rid of my other error but then started this one

charred smelt
#

Hi folks, I got a weird issue. Just after loading into a new area, my HUD glitched and my FOV is increasing with each bullet I'm firing. It seems I can't find how to restore my hud, and resetting the FOV doesn't solve the firing issue. Any clue ?

sharp bough
charred smelt
sharp bough
raw raftBOT
#

DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.

If you are still unsure whether you have it or not, try to do any of the following:

  • interact with objects or people
  • use a weapon (you shouldn't even be able to see it when you select it)
  • open your inventory
  • drink/eat/sleep
  • check your HUD in the bottom left corner

If you cannot do any of this, it probably means you do have busy hands.

The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.

Certified DISABLED animations that bring busy hands:

  • Opening/closing backpack and any option related to this
  • Animation for skinning mutants
  • Disassembling objects with Left-Alt pressed
  • Picking up objects where you can see the hand movement
charred smelt
#

Strange, I haven't activated any additional animations. My modlist is vanilla. Thank you anyway !

wind pier
#

anyone know what the issue here is when i load up the game

sharp bough
#

did you mess with ZCP?

sharp bough
wind pier
sharp bough
#

it takes a few days to repopulate stuff, messing with ZCP probably caused some issues.
Also, change your PfP

#

profile picture

sharp bough
# wind pier

collapse all the categories and make sure the bottom log is visible and take another screen shot

wind pier
#

whats the bottom log

sharp bough
wind pier
#

im not sure how to see that i cant on mine

keen cedar
#

drag the border from the bottom...

#

worst case you can reset the GUI

wind pier
#

how did you get to that tab

#

to reset the gui

keen cedar
#

settings

sharp bough
wind pier
#

i dont see a setting tab

heady tundra
#

Does anyone have their GAMMA up-to-date within the last month and can help me check if companion inventory unlock is working? Id used it in the past and it'd let me take everything from a follower, down to their default gun if I wanted, so they'd have no weapon. Now im not able to see that "deep" into their inventory, it almost seems like the mod isnt working after I did a full reinstall two weeks ago. Everything else seems fine, ive updated since and it hasnt made that mod change or work how it used to.

sharp bough
wind pier
#

yeah found it

wind pier
#

here is what it looks like now

sharp bough
#

so the log clears up

heady tundra
# sharp bough did you reenable the mod?

Yea ive turned it on and off, doesnt seem to change anything. In the past it was very clear it was working, I could see followers PDA and such, now theres no difference when i open their inv, mod on or off. Doesn't allow me to take their "equipped " guns

sharp bough
wind pier
sharp bough
wind pier
#

yes

sharp bough
wind pier
#

not now

sharp bough
# wind pier not now

Since I can't see it in the log, what are the file paths for GAMMA and Anomaly

autumn pendant
heady tundra
wind pier
#

this pc > local disk > gamma

sharp bough
wind pier
#

this pc > local disk > anomaly

winged ibex
#

Hmn. I'm having an interesting issue. I've empowered some artifacts to full and when I retrieve them from my stash they're reduced to 10-20%. Is that just because I've kept them stored so long? I've seen the same thing happen with artifacts found on dead stalkers too, and had artifacts go from higher quality to worse when pulling them out of metal containers too, or be treated as lower quality when turned in for quests.

sharp bough
# wind pier this pc > local disk > anomaly

Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN. Then run a full install.

FULL INSTALL:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when
tropic fox
sharp bough
full parcel
sharp bough
winged ibex
#

Are you looking for item count or weight/volume?

sharp bough
winged ibex
#

under 50kg in the one I'm using for artefacts

sharp bough
sharp bough
full parcel
winged ibex
#

about 400kg in the other two I use

full parcel
#

How is it possible threw the debug?

winged ibex
#

spread between the two

sharp bough
raw raftBOT
winged ibex
#

... I will admit to packrat tendencies, but on the other hand, so many different guns

sharp bough
winged ibex
#

Figures. Not a huge loss, just a pain to get them to full for later use in making a full-power fused artifact, plus the wasted money on artifact melters. Ugh. Ah well, least I got my Volat Emerald all the way to max before this crap

#

(Unrelated, JFC I want to get rid of this death lamp responsibly. Damn thing is scary).

#

Thanks for your help

sharp bough
#

you still haven't changed it

tropic fox
#

i might have to reinstall everything

sharp bough
tropic fox
#

basically yesterday i was able to play and previously been able to play but today i got a error that was fixed with a update but now im getting this and i cant even load the game up

harsh basalt
tropic fox
rough latch
#

hi, i always crash when i go to the dark valley, i do the ! bas thing, but it didn't work. Any ideas?

stray chasm
#

anyone know how to fix this?

earnest light
#

hello, I am trying to run gamma in my D drive, and although I have both files in the D drive and mod organizer set to the anomaly folder in said D drive, it still looks for my C drive and wont open the game. any advice would be appreciated!

prime fulcrum
#

p!kick @heady gazelle you've been already told to change your profile picture. You can join the server again once you change it.

native gustBOT
#

xtick Invalid member argument.
Member not found.

Usage: p!kick <member> [reason]

prime fulcrum
#

Oh

sharp bough
# tropic fox

yea, reinstall might be best. Log says you got corrupt files and while I think they are mostly from BAS there might be more

#

make sure you delete and redownload GAMMA files. The Anomaly folder should be fine

#

As in the entire GAMMA folder

sharp bough
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

sharp bough
sharp bough
tropic fox
#

shiiit do i just right click and delete all gamma stuff?

rough latch
stray chasm
#

@sharp bough thanks

earnest light
sharp bough
raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
sharp bough
rough latch
sharp bough
stray chasm
sharp bough
tropic fox
#

i actually cant uninstall the gamma install file

earnest light
tropic fox
#

im clicking to delete it and it just wont go lol

rough latch
sharp bough
tropic fox
#

nope just wants to stay

stray chasm
#

did the same thing i followed the steps

sharp bough
sharp bough
#

screenshot the entire Anomaly folder

stray chasm
#

mb my friend is dumb

rough latch
stray chasm
#

we fixing it rn

sharp bough
# rough latch

disable it, it's part of "GAMMA disabled" for a reason. It can cause issues

north turret
#

Anyone can help?

prime fulcrum
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

sharp bough
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

rough latch
sharp bough
raw raftBOT
#

Follow these instructions to send your mod list: <#β•­πŸ“–faq message>
(if you're using this command somewhere else, send the file where it was asked)

tidal dragon
north turret
prime fulcrum
#

read

#

the bot message

rough latch
rare crater
#

will having the agressor reshade cause any issues or should i leave it disabled ?

north turret
sharp bough
# rough latch

literally didn't mention the bunch of other mods you have on...

prime fulcrum
marsh siren
#

i got the exact same error trying to open anomoly after install

#

installer only installed 227 mods for me though

sharp bough
# marsh siren installer only installed 227 mods for me though

Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN. Then run a full install.

FULL INSTALL:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
vivid bane
#

help please

north turret
marsh siren
#

lol

prime fulcrum
marsh siren
#

i got flagged as a bot

#

rip

prime fulcrum
vivid bane
rough latch
vivid bane
prime fulcrum
# vivid bane

!full and screenshot the errors in the black console if there will be any

raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

marsh siren
#

i followed the exact instructions on the install page, made sure my anomoly was updated to 1.5.2, opened it then ran install and this is how my mod launcher looked after full install

prime fulcrum
marsh siren
#

figured id send some of my errors in meanwhile

lucid condor
#

Hi ! I hope everyone is having a great night. I just installed GAMMA following all the steps, made sure my mod count is 359, but right after I start a game after choosing my loadout i get this message. Anyone know why ?

prime fulcrum
lucid condor
prime fulcrum
# lucid condor

look for mod "245 -Hideout Furniture - Aoldri"

Right click on it and press "reinstall"

Pick everything except option 3a
Replace

empty halo
lucid condor
rough latch
sharp bough
north turret
stable forge
#

!blackscreen

raw raftBOT
north turret
# empty halo Same error, have you solved it?

Yhe we need to download the update that the bot shows and then copying it and overnight it to anomaly folder then full gama installation from Gama instaler the installation its now done let me see if it opens

#

@empty halo it works now thanks to the devs do as the bot shows

prime fulcrum
wooden adder
#

I'm unfamiliar with github, how do I check which mods were added on the latest build? is there a changelog somewhere?

tall snow
fervent laurel
#

Bett thanks

tall snow
#

walks u through it step by step

#

everyone helps all the time here too

#

so just ask if u need smth

sharp bough
#

nooooooooooooooooooooooooooooooooooo

olive relic
#

im pretty sure i've missed a step here but i've just installed gamma the guide tells me to and i go to launch it in dx11 and i get the opening splash screen and it closes after a few seconds, i am on windows 10, intel cpu, nvidia gpu

wooden adder
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

olive relic
solar ivy
#

Hello I have a Bug and need help to fix it if possible . when I try to reload the R button do not work and I found that there is no reload rebinding option and I found out that it is F10 by default any way or line of code I could enter to put my reload back to R ? thanks in advance for the help

marsh ether
#

!delete

raw raftBOT
wooden adder
#

I think it's the line "bind wpn_reload" mine is set bind wpn_reload kR

solar ivy
odd field
#

How to fix screen being stuck in corner?

#

I've tried alt + tabbing out and alt + entering, one just temporalily fixes it while the other doesn't do anything.

wintry wharf
#

Just finished installing GAMMA, only shows 358 mods active not 359, trying to figure out what this is, any ideas?

urban pelican
#

How do I fix this, please help

prime fulcrum
heady merlin
#

How do i get the default modlist? In MO2 i hace Made changes b4 but Noe i want ti start a fresh run with the default 359 mods

north turret
#

what does maid and groks dynamic zoom enabler do

#

i disabled the free zoom mods is this a part of them?

raw raftBOT
#

1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again

If this doesn't work follow the pic below:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png

mossy flare
#

What should I do if I improperly moved everything from "downloads" to "C:"? Sorry for being stupid.

proud elm
#

been getting this error for a bit, unsure what to do with it

brisk zinc
raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
prime fulcrum
north turret
#

how can i find out what gamma companion rework does

tender forge
#

Falco how could you forget clueless

mossy flare
#

....yeah I, moved them before reading those instructions. I didn't delete anything (Modorganizer.ini and "mods" folder) before moving files.

distant plover
#

wait nvm found it

tall shell
#

I figured out how to fixed this glitched dx11 water which a ton of people are dealing with, specular gloss factor needs to be set to around 5

#

Doesn't fix it but you'll get rid of whatever mushrooms your player's on. Glitched water, Grid water, dx11 water, (for ctrl+f)

mossy flare
#

Following the instructions regardless, if it doesn't work, I'll just start from square one, carefully.

proud elm
solar ivy
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

grave canopy
#

cant start new game

proud elm
# prime fulcrum !full

Somehow, someway, doing a full gamma install made it even worse, and now the game doesnt even start. I have no idea how that happened

heavy wind
#

^Same boat, followed steps flawlessly from fresh folders and still can't get it to work

#

Third time's the charm? 🀞

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

prime fulcrum
raw raftBOT
#
  1. Download the old BaS version:

Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z

2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
4) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
5) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
6) Paste the gamedata folder inside this newly created folder
7) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
8) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons

If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.

proud elm
prime fulcrum
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

heavy wind
#

Quick question; is it fine when doing a full install again that the installer checks and uses cached versions of the mods that it has already downloaded? (Last two attempts) I'm assuming it will find the ones I am missing and grab them?

proud elm
# prime fulcrum !k98

Do this and then do the install again, or should it be fine from here? because if its the second, still throwing errors

proud elm
#

Crashes on start still

brisk zinc
#

Send crash log

proud elm
#

and by pretty sure i mean not sure at all

brisk zinc
#

No that's not the right log

#

!crash

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

proud elm
sharp bough
proud elm
sharp bough
# proud elm looks pretty bad

Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN. Then run a full install.

FULL INSTALL:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
brisk zinc
#

A classic case of blocked on Moddb

proud elm
#

yeahhhhhh

#

try again later it seems

amber sable
#

the shortcut wasnt able to be created do i have to restart install or is there something faster i can do

sharp bough
raw raftBOT
heavy wind
#

Should I just cancel and retry at this point

prime fulcrum
heavy wind
#

Looks good to me

tepid garden
#

happens on Zaton

heavy wind
prime fulcrum
raw raftBOT
#

1. In MO2, find your "Night Mutants- xcvb" mod and right click it. It should show a list of things.
2. Click "Visit on www.moddb.com"
3. On the mod's page in moddb, click "Download Now", to download an updated version of Night Mutants.
4. In your MO2 again, go to the very top-left of your window. Click "File", then "Install Mod"
5. Find your downloaded version of "Night Mutants" and click it to install. Rename the mod to "Night Mutants Overwrite", or something like that.
6. "Night Mutants Overwrite" should now be a mod in your "GAMMA Disabled" section. Find it, and click the empty box on the left of its name to enable it.

prime fulcrum
heavy wind
#

Ah okay, yes papa.

heavy wind
#

Proceed with a different mirror? Any pointers in mind?

prime fulcrum
heavy wind
#

To check the page or to install.

distant plover
#

So Im trying to get into the mod DB website to redownload reshader and keep getting this error

versed fiber
#

i am having some problems where it launches and then crashes and gives me this error and help would be apricated found the problem 3 main files had to be changed with t he ones rc3 had got the solution from only installation

odd obsidian
#

Issue with lighting in dead city after doing step 3 of FPS optimization

timid sigil
#

Seems as an undoable quest for freedom stalker. The package is high in the tree, no branches to jump on to, basically unreachable. Location @ Agroprom

north turret
#

I had to go to mine website and disable the protection

muted crane
#

Silly question here. I seem to have lost the gamma splash loading screen after you click RUN in Mod Organizer. The game loads with the default anomoly splashscreen. Is there a way to fix this? Gamma runs fine, BTW.

west valley
#

how do i fix this?

weak fulcrum
#

all 359 mods are installed and im dx11
whats wrong

#

Expression : <no expression>
Function : CModelPool::Instance_Load
File : ..\xrRender\ModelPool.cpp
Line : 120
Description : fatal error
Arguments : Can't find model file 'dynamics\weapons\wpn_sks_b\wpn_sks_b_pu_hud.ogf'.

stack trace:

#

again...

weak fulcrum
#

nevermind i guess it works now

#

how do i turn off saves only being possible near a campfire?

mossy flare
#

Crashed when loading a new game. Followed instructions to the letter.

shadow frost
#

I'm loading into a new game and everything is black except the HUD and interaction prompts..

arctic sphinx
#

Which included mod is it that makes binoculars remember their position instead of having to re-zoom with each use?

west valley
#

any help?

deep escarp
#

anyone know how to fix this error? tried going to yantar and this happened

weak fulcrum
#

game just randomly crashed for me aswell
Expression : <no expression>
Function : CModelPool::Instance_Load
File : ..\xrRender\ModelPool.cpp
Line : 120
Description : fatal error
Arguments : Can't find model file 'dynamics\weapons\wpn_sks_b\wpn_sks_b_pu_hud.ogf'.

stack trace:

deep escarp
#

rip

stable ridge
hallow breach
#

Fatal Error

Expression : <no expression>

Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204

Description : fatal error

Arguments : LUA error: d:/anomaly/bin/..\gamedata\scripts\tasks_fetch.script:308: bad argument #1 to 'pairs' (table expected, got nil)

stack trace:

Press OK to abort execution

ОК

I go up to the stalkers and choose whether there is a task

prime fulcrum
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

prime fulcrum
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

prime fulcrum
weak fulcrum
#

alright

raw raftBOT
raw raftBOT
#

DO NOT ENABLE Weird Tasks Framework in your Mod Organizer, and do not try to install it manually. First of all, that mod isn't supported, and second - it's outdated, unfinished and unstable even on vanilla Anomaly.

weak fulcrum
hallow breach
prime fulcrum
#

read

prime fulcrum
distant plover
#

!152

prime fulcrum
# weak fulcrum

!full and screenshot the errors in the black console if there will be any

raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

weak fulcrum
#

alright

#

will this take long?

mossy flare
#

Any suggestions for the error I received?Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...anomaly/bin/..\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)

stack trace:

weak fulcrum
#

il go grab a drink and il be back when its done checking everything

lucid pumice
#

anyone know why when i launch the game it launches the normal anomaly instead of gamma

hallow breach
deep escarp
prime fulcrum
lucid pumice
raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

mossy flare
hallow breach
prime fulcrum
#

Ρ‚ΠΎΠ»ΡŒΠΊΠΎ toxic air ΠΎΡΡ‚Π°Π²ΠΈΡ‚ΡŒ моТСшь

prime fulcrum
mossy flare
hallow breach
prime fulcrum
prime fulcrum
mossy flare
weak fulcrum
prime fulcrum
mossy flare
#

Roger, thanks for the help πŸ™‚

hallow breach
prime fulcrum
weak fulcrum
prime fulcrum
hallow breach
# prime fulcrum screenshot it again in 15 minutes

Π΄ΡƒΠΌΠ°ΡŽ ругаСтся, Ρ‚ΠΊ Ρƒ мСня квСст Π±Ρ‹Π» взят, Π° ΠΌΠΎΠ΄ щас Π²Ρ‹ΠΊΠ»ΡŽΡ‡ΠΈΠ», Π½Π΅Ρ‚ Π°Π½ΠΎΠΌΠ°Π»ΠΈ Ρƒ мСня Π±Ρ‹Π» с рСдакса Π΅Ρ‰Π΅, Π½ΠΎ вопрос, Π° Ρ‡Ρ‚ΠΎ ΠΏΠ»ΠΎΡ…ΠΎΠ³ΠΎ Π² Ρ€Π΅ΠΏΠ°ΠΊΠ΅?

prime fulcrum
# hallow breach Π΄ΡƒΠΌΠ°ΡŽ ругаСтся, Ρ‚ΠΊ Ρƒ мСня квСст Π±Ρ‹Π» взят, Π° ΠΌΠΎΠ΄ щас Π²Ρ‹ΠΊΠ»ΡŽΡ‡ΠΈΠ», Π½Π΅Ρ‚ Π°Π½ΠΎΠΌΠ°Π»ΠΈ Ρƒ мСня...

Π°, Ρ‚ΠΎΠ³Π΄Π° ясно, Π½Π°Π΄ΠΎ Π½ΠΎΠ²ΡƒΡŽ ΠΈΠ³Ρ€Ρƒ, Ρ‚Π°ΠΊ ΠΊΠ°ΠΊ Ρ‚Ρ‹ wtf-квСст ΡƒΠΆΠ΅ взял (ΠΈΠ»ΠΈ Π΅Π³ΠΎ просто Π·Π°Π²Π΅Ρ€ΡˆΠΈΡ‚ΡŒ ΠΌΠΎΠΆΠ½ΠΎ)

#

ΠΏΡ€ΠΎΠ±Π»Π΅ΠΌΡ‹ ΠΎΡ‚ Ρ€Π΅ΠΏΠ°ΠΊΠΎΠ² ΠΌΠΎΠ³ΡƒΡ‚ Π±Ρ‹Ρ‚ΡŒ

weak fulcrum
prime fulcrum
hallow breach
weak fulcrum
prime fulcrum
inland sphinx
#

iam new to this game, but i want to ask why suddenly I can't use my weapon and PDA, when I use heal the animation changes like this, plz help

austere mortar
#

there are some situations when addons can break, but usually it happens only when u try ur best to break them on purpose ;p

inland sphinx
#

i only disabled some mods list that i get from youtube to improve my pc performance

austere mortar
#

not the case, i mean i cant say for sure from just 1 screenshot with no other info, but sometimes when u spam some action (for whatever reason), nobody expects player to play like this, so usually addonmakers dont spend time on it

#

and sometimes u can catch that rare moment where the cached variable change the animation section and play a new anim with old item

#

or something like this xd

mossy flare
#

@prime fulcrum

prime fulcrum
raw raftBOT
#

What "vanilla" means for G.A.M.M.A.:
Vanilla G.A.M.M.A. is considered to be the G.A.M.M.A. modpack as it comes. This means you have #πŸ“577-mods-in-mo2 and have not enabled or disabled any of those, have not enabled any animations in MCM, and have not added any mods of your own.
If you're seeing this, it's because you're posting in the wrong channel. Go ask in #πŸ”¨modded-gamma-support.

inland sphinx
heavy wind
#

I had a nap came back and booted MO2 I have 358 mods enabled..

austere mortar
#

go to moddb install 1 random addon and it'll be okay

heavy wind
#

It seemed to work until I tried to run a new game and then got this error/crash

#

That ONE mod is real detrimental huh

arctic sphinx
#

One of the included mods says it sets zoom to default when you bring up your binocs, but mine are always saved however I last had them zoomed. Is there a way to change this setting?

austere mortar
raw raftBOT
#
  1. Download the old BaS version:

Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z

2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
4) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
5) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
6) Paste the gamedata folder inside this newly created folder
7) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
8) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons

If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.

prime fulcrum
raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

timber epoch
#

Anyone mind helping me getting some details about enabling and disabling mods right?

#

I don't want to fuck up a save by disabling something in the modlist

#

Like when I turn off a mod without dependencies, is the chance of something breaking still high?

odd field
#

Anyone know what this is caused by? And possibly how to fix it?

prime fulcrum
raw raftBOT
#

Change to DX11 or disable the 282- GAMMA Loading Screens - CS Eden mod in MO2

odd field
#

Ty Ill try this

compact spire
#

2nd install, happened right after i clicked launch

raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

compact spire
#

ill try it, thank you

mossy flare
#

@prime fulcrum I was able to load up a new game, not able to playtest tonight. Thank you so much for your help πŸ™‚

prime fulcrum
heavy wind
tidal sparrow
#

1st time install and this error happened when I clicked run.

prime fulcrum
west valley
#

how can i improve performance?

somber bone
#

do i reinstall food drugs and drinks mod i dont seem to have all the animations for example opening backpack or picking up items if thats in this mod

raw raftBOT
last hinge
#

2nd time installing the modpack, I had success and played a good few hours but I got a new SSD and wanted to reinstall, made sure to carefully follow every step for this install and i'm getting this error when launching with DX11 -- side note, I noticed 360 mods activated and i'm quite confused as to what the extra one would be, not sure if thats whats causing the CTD on launch.

raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

last hinge
#

Gotcha, i'll give it a shot, thanks

slow zephyr
#

hey, sorry cus i dunno where to post this but game crashes on new game, i followed and reinstalled the installation guide but still the same.. there isnt any error too.

light osprey
#

Anyone know how to fix this?

quaint wedge
light osprey
#

I have 358 for some weird reason

quaint wedge
#

how recently did you install the game?

light osprey
#

Yesterday

quaint wedge
#

Try doing a full install again on the installer it should take less time since you already have all the mods, if that doesnt work I'm sure someone way more experienced will help. I had the same issue and just needed to install again and it added everything I needed

light osprey
#

Mmm ok I’ll try that

quaint wedge
#

also make sure you aren't flagged on moddb

#

It will just run through all the mods and say already installed, and install what ur missing

light osprey
#

Yeah I’m not flagged, just checked

#

Doing a full install again rn

#

Fingers crossed lol

quaint wedge
#

also if that doesnt help try this next

#

!k98

raw raftBOT
#

1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these three folders (check pic)
3) Go to your Anomaly folder
4) Paste these three folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.

Here is a picture for reference:||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png

light osprey
#

I did that yesterday which fixed my crashing on startup

#

Now i crash on new game start yay

#

🀣

#

I consider that progress

quaint wedge
#

so wait did you get that message starting it or loading a save?

#

like starting the game vs loading into a save

light osprey
#

I got it when startinng a new game

#

Just picked out my starting stuff and faction

last hinge
#

@prime fulcrum pripyat, stalker, it worked thank you buddy

light osprey
#

Crashed when i tried to start it

quaint wedge
#

okay lmk if that helps I was gonna say if its when loading a save then you probably just had a fucked save that was missing data

slow zephyr
#

mine crashes too but it doesnt show any error

prime fulcrum
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #πŸ€–bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #πŸ”¨modded-gamma-support.

rare crater
#

has anyone figured out how to fix the zoom bug with freezoom ? the fov seems to change and i cant reset it

light osprey
#

You have saved me

#

I have been trying to look for answers for like an hour

#

Also i have 359 mods active now.. i didnt have the stutter one on 🀣

raw raftBOT
#

DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.

If you are still unsure whether you have it or not, try to do any of the following:

  • interact with objects or people
  • use a weapon (you shouldn't even be able to see it when you select it)
  • open your inventory
  • drink/eat/sleep
  • check your HUD in the bottom left corner

If you cannot do any of this, it probably means you do have busy hands.

The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.

Certified DISABLED animations that bring busy hands:

  • Opening/closing backpack and any option related to this
  • Animation for skinning mutants
  • Disassembling objects with Left-Alt pressed
  • Picking up objects where you can see the hand movement
rugged sparrow
#

FATAL ERROR

[error]Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
[error]Function : CRender::texture_load
[error]File : ..\xrRenderDX10\dx10Texture.cpp
[error]Line : 535
[error]Description : The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.

[error]Arguments : c:/games/stalker anomoly/anomaly-1.5.1.2/bin/..\gamedata\textures\ui\alticons\bg3.dds

#

Any help with this would be apreciated

light osprey
rare crater
#

But freezoom isnt an animation tho is it ? Eh I'll just leave it disabled lol

prime fulcrum
#

i asked you for the crash log

#

twice

light osprey
#

Oh solution fixed it

#

His solution *

silk stratus
#

anyone know how to deal with this?

thin acorn
#

Okay, that's strange. I'm having issues with a crash to desktop whenever I try to transition to Wild Territory. Crash log is attached.

#

Moving to any other zone is fine, but I've tried different entries into WT and tried previous saves without any change. MD5 check via the installer came back clear.

hearty folio
#

how do i fix this weird weapon position.. its the m4a1 RAS

thin acorn
prime fulcrum
#

!full

raw raftBOT
#

1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #πŸ€–bot-commands.

thin acorn
#

Huh, okay.

marble moss
#

How can I fix this? Can anyone help plz

fluid mauve
#

I can't open that stash

jaunty glen
#

My game sometimes crashes when I try to cross into some new regions or load a save, any ideas?

compact spire
#

happen on game startup

raw raftBOT
#

Change to DX11 or disable the 282- GAMMA Loading Screens - CS Eden mod in MO2

north turret
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​||||​|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

dusty viper
#

is it possible to teleport to an important npc who died but i cant find his body?

dusty viper
# fluid mauve I can't open that stash

wrong "loot zone" height. go to the ground floor and the invisible "loot zone" should be there. spam F where the stash should be, but on the ground floor

compact spire
#

cant load my save

#

nvm i got it

#

just need to start a new game

dusky kayak
#

Hey, would it be possible to just migrate both the GAMMA RC3 and Anomaly folders from my HDD to my SSD, or would that require a complete reinstall? My hope is that I could just show the new path to MO2 and it would work just fine after the migration

compact spire
#

just load in and then this come up

potent tree
raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
latent lagoon
#

Hey peeps, what mods to disable to have default grass? gardener of the zone and autumn aurora for sure, is there anything else?

dusky kayak
tender forge
# potent tree

Close mo2
Launcher gamma install as admin
Click gamma data
Click install only gamma addons

lavish marsh
#

CTD everytime talking to weapon traders

astral nova
#

i also get that but when i create my character

marsh pivot
#

Can anyone help me I have installed all the files but it only says 232 mods active?

prime fulcrum
marsh pivot
wanton tide
#

I keep running into a bug when I click while unjamming my weapon. I can't use any of my weapons after or pull them out and have to refresh the game.
Anyone know how to fix this?

brazen raft
#

FATAL ERROR

[error]Expression : F
[error]Function : CXml::Load
[error]File : xrXMLParser.cpp
[error]Line : 127
[error]Description : gameplay\dialogs_hidden_threat.xml

stack trace:

livid panther
#

i keep running into a memory problem (says in logs) and remember a patched.exe mod that allowed stalker to use more memory for COP (i think) does it work with gamma or any other fix? got no fps drop or any lack of memory symptom just seems like stalker is not allowed to use all memory it wants xD