#better-mc-forge
1 messages ยท Page 354 of 1
affirm thank you
!fps
im still only getting 10-15 FPS
did you follow everything?
yes and put it on the recommended
How much ram does your pc have
i do have one more concern, the title is glitched out for some reason
how much did you set
5050MB
Curse forge
i watched the YT vid and followed the steps
!fps
open the link from that, and read fully
sorry guys i uninstalled Essential and yet it still doesn't work
Uploaded crash-2024-12-26_22.52.11-client.txt from @crimson goblet to mclogs: https://mclo.gs/ECZUOhG
redownload the pack.
If you're still using curse switch to atlauncher
where can i get at launcher?
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
can you use custom modpacks on atl launcher?
yeah
can make modpacks on there too
it mentions how to move a save, but can i extract my own personal modpack as a zip? and then import it into atl launcher?
looks like i imported the mods
if my friends have curse forge can they join my instance?
Guys my bmc4 forge fps is very funky. Keeps jumping down to 10 from 120 every few mins
!fps
Yeah I used that
long as they have the same versions of the mods you have
what launcher you using
Got 8gb, GTX 1650. Allotted 5gigs of ram. Got shaders off. Using modrinth
Aight I'll try that thx
it can?
Seemed a bit rocky even on 4gb last time i checked
yeah bmc is like really low
neato
it's almost same requirements as vanilla iirc
Even with that many mods?
yeah, the modpack is focused on a lot of performance ease
The devs here are pretty dang focused on optimizations
Nicee. Love me some good ol fps
even with ATL launcher it's just getting stuck on the world generating screen
do you guys know any mods in particular that don't work with the better mc forge modpack if you add them?
Do you have any idea how many mods would brick bmc
just tell us what mods you added
lol ok
also please don't modify any LPS packs, they are allergic to that
you removed a bunch of mods for no reason
please stop removing/adding things if you dont know what you're doing
i removed fancy titlescreen
not entirely, but in the case of heavy modification it like removing a ton of mods it makes the pack useless
that mod is needed for the pack to work
its easier to tell em to just dont do it tbh
yeah i added it back dw
i added alex's caves
and i added villager recruits
i added essential but removed that now
cardinal sins
just adding back isn't enough as it when you first removed it, it took out the configs devs set in there
please retry on a fresh install
Ah i see
then that just makes us look like we are anti-modification
We already get yelled at for crap like "being anti self hosting" just cause we don't like essential
Dont you literally have e4mc???
how does that make sense
tbh i am not too surprised yeah i kind of butchered tbe modpack
sorry about that guys
I just know other modding discords shit on lps packs a lot and dislike em for some reason
charged with murder
fork of it, but those people usually are hateful cause of the screen blocking the pack form working, which isn't entirely just from LPS's adjustments
people jump the gun before they have the facts then send nasty death threats for this sort of crap
yikes really
that's crazy
mm, more internet deliciousness
it's so fun (it isn't)
keyboard warriors
my favorite
starts with reddit 90% of the time for mc drama tbh
doesen't like all the shit happen on reddit lmao
yeup
delicious
ok so what i did was export bettermc, then imported it into a custom profile on curse forge(ik you said you alt launcher but it was a bit easier to make the modpack here)
now what i do after is i go to the add more content button and then just add whatever mods i am looking for
So i want to add bosses of mass destruction
alex's caves
villager recruits
atlauncher is better and easier to add mods to btwq
curse has issues breaking downloads and also hogging your resources
so what i did with atl is i just copy pasted the mods folder from curse to athe atl one
i'm not a computer guy so did i fuck that up?
so i had the bmc as a base
and then added some mods into it
i will not remove any mods this time tho
use bmc first, then you can add your extra mods to it, if they don't work out you take them out one by one (the ones you chose to add) to see which one is messing up
just transfering the mod list won't work as there's tons of custom configs that the devs put into the pack
go into atlauncher, go to packs. search and download bmc
then once all the mods install and it's finished, you can use the "add mods" button and find the ones you wanna add on top of it.
use the curseforge one
you can open all in browser and then just let each countdown go and let it download
have to stay on the page during the count down or it won't start
i think the versions won't auto match
for mandala gui
it only let's me install for 1.21
it should
i would have been on that other pack trying to make it run like a caveman bashing rocks togethor
had you guys not informed me
trying to make packs work like a caveman is half the fun
so....
bmc still didn't work
when i got to the world create screen
it froze
๐ญ
did you do a fresh install
ye brand new on atl
added anything?
then i have absolutely no idea
maybe it's a ram issue?
i only have 16 gb on my laptop
and i have allocated around 6
it should give you a warning when you start the game if you allocated too much or too little ram
it should always recommend some number
IT WORKED
i just restarted the game and it worked
magic
send the logs
Heya! Im hosting a server with a few friends, but somehow we often get very high tickrate on the server (with log msgs saying server cant keep up and being behind) - even with pregenerated chunks - causing even crashes from time to time.
Added is also the latest crash we had, i guess setting the max-tick-rate to -1 would stop those crashes, but hope anyone is able to help to maybe reduce lag? ๐
Uploaded crash-2024-12-26_23.12.34-server.txt from @magic jungle to mclogs: https://mclo.gs/mAPjPSz
does it generate logs if its freezes
?
and then i press the kill mc button?
cuz i can hear the game in the background
there should be a latest.log
Uploaded message.txt from @crimson goblet to mclogs: https://mclo.gs/nzitj4j
i did notice back earlier on curse forge, that some mods had an error sign saying they were not comptabile with forge launcher
you think that could be cause?
my game keeps crashing too
that has nothing to do with it
Please read the full contents of the โ #get-support channel for us to provide assistance.
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
Please read the full contents of the โ #get-support channel for us to provide assistance.
can anyone help me? bmc 4
Uploaded crash-2024-12-27_22.00.06-client.txt from @analog rivet to mclogs: https://mclo.gs/OokEO4d
5 is on neoforge and 4 on normal forge
and 5 is on 1.21.1
can you help this
and 4 on 1.20.1
its say bclib in fabric
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Guys what is this? Can't enter anymore to my server
Hi, im trying to host a server using the server pack, i run the batch file and get this
not sure where to proceed from here
please answer these questions and attach a log
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
could you try reinstalling the serverpack maybe
if that doesnt work screenshot the entire serverpack folder
alright, im just out at the moment but i will later? is it ok if i ping you at that time?
yeah its all good
was a better backpack mod ever considered for the modpack?
im questioning because the server im playing in has disabled simple storage network mod due to it causing lag
so i cant use that system with forceloaded chunk to have my chests available everywhere
and the current backpack mod is quite small
is there any wearable lightsource in bmc4?
Hi , my game crashes every time I get to a specific village
Out of Memory.
!ram
Hm.
Uhh
!fps
Go through this guide. There's one specific entry at the top you need to take care of
Also
Please provide the full log regardless
Just throwing a screenshot doesn't give the full context
Thanks and here it is
Uploaded crash-2024-12-27_12.56.38-server.txt from @buoyant breach to mclogs: https://mclo.gs/QHXVDBF
Is the redirector mod good? Modernfix is telling me to uninstall
wdym its telling you to uninstall
!fps follow this guide and especially the memory part
when i am on the mainscreen, i get a message warning from modernfix, saying that redirector causes a lot of issues
thats the first time im hearing of that actually
but it seems true
for now just keep it in the modpack
Hey guys,
Im trying to turn a villager into a zombie to cure it so i get cheaper trades, but my villager keeps dying. I made sure the server is in hard difficulty but it keeps happening. Any reasons why it happens?
if i was making my own modpack, can i leave redirector out then?
im rly not sure of how much of an improvement it makes so imo you should test it out
how do i aligate more ram to better mc\
you can go to settings in whichever launcher you are using
and then it will let you change the amount
that is allocated
oh
i mean somthing else then
when you go to edit instralliation
then jvm arguments
how do i get in a world
?
wdym
create a single player world or do you want to play multiplayer?
some guys helped me out in server
Hello, My server won't allow me to connect. The crash log says: Time: 2024-12-27 13:08:24
Description: Ticking entity
java.lang.IllegalArgumentException: Cannot set property DirectionProperty{name=facing, clazz=class net.minecraft.core.Direction, values=[north, south, west, east]} as it does not exist in Block{aether:ambrosium_torch}
....
- What Minecraft version are you using? 1.20.1
- What launcher did you run Minecraft with? CurseForge
- Have you changed the modpack in any way? Added mod for controller and keeping your stuff when you die
- What version of the modpack are you using? 35.5
- Have you ever gotten past the crash condition without crashing, or does the game always crash? Worked just fine until today
- What steps cause the crash? I shot a ambrosium torch arrow and the game crashed. Then it won't let me back on the server.
How is your server hosted
Hello, hosted through Bisect Hosting
Did you install pack yourself or did bisect do it for you
Bisect did it other than the 2 mods I spoke of above
and logs please
the crash logs? how do i get those? i hit save and i don't know where they save to.
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
get the ones from your launcher since that's where it's crashing
sorry, how do i do that?
oh
nevermind
i missed that whole message above
I sent the most recent one. there are 7 for today
if i search hs_err_pid it doesn't pull anythign up
it's in the main folder as it says in the command
what was the name for this file?
go back a folder, check for a crash report folder or hs file
there isn't
Try atlauncher instead. see if that helps. download the pack in atlauncher and you can add your two mods and check that way to see if it works
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Hello,
It still says Connection Lost: Server closed launching from th eATLauncher Console
๐ฆ
how can we get the pillar of monkey the most easy way ???
If you find it, you find it.
There's no "easiest" way outside of whatever has the most chests in a dense space.
ok because i know we can craft it but i never found the biome :/
It didn't work
grab fresh logs from atlauncher then
where to upload?
here in the chat
Uploaded message.txt from @trail crane to mclogs: https://mclo.gs/1EJ9N7e
ok
grab latest.log, crash report, or hs_err_pid file
how do i find it in the atl?
open folder
that link already has writing in it, i can't delete it
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
you don't delete anything. you just find the log and pop it into chat here
Uploaded message.txt from @trail crane to mclogs: https://mclo.gs/c2J64aM
Hey guys, asking for friend- What's differences between Forge and Fabric versions of BetterMC?
that's the same one.
Was there no hs_err_pid file in the main folder? or crash report folder?
if not just test without the two mods you added see if that works
take out the mods you added?
yes i did
is this affecting just server, or also single player
What version of the pack was this again?
1.20.1 v 35.5
kk double checking. best I can do is suggest reaching out to quark maybe?
quark?
yeah quark's devs
it's saying you have to remove that arrow most likely to rejoin the server. could kill the entity from console of the server
go to the console of your server and use the command to kill the entity.
should be /kill @e[type= something like that.
says invalid or unknown entity
you have to put the name of the entity in there
i've tried type=aether:ambrosium_torch
type=ambrosium_torch
type=minecraft:ambrosium_torch
entity.ascended_quark.ambrosium_torch_arrow
i typed /kill @e[type=entity.ascended_quark.ambrosium_torch_arrow]
and it didn't work
Hey
I'm making a server of better mc skyblock
When running /skiblock commands it trows error This command can only be used in skyblock word
any more advice?
take out the entity. in the command maybe?
nope
sorry, I din't see the channel
I personally wouldn't know what to use then tbh. you may need to wait for someone else who knows.
its probaly just ascended_quark:ambrosium_torch_arrow
the entity id
idk if killing it would fix it
i dont remember the fix to that crash
Hello, I'm having an issues with the Better MC server files. I changed the ram from 4 to 12 gigs in the variables.txt but the server itself is not actually using the additional ram, it appears to be capped at the 4 gigs. The machine hosting the server has 64gigs available and the better mc server is otherwise working normally just sluggish and having lag issues. Any help would be appreciated.
hello- i am VERY new to Java and its mods and this mod is PERFECT but the shaders do not appear to work. Am I doing something wrong?
whats the best place to bumblebee hives?
Start menu crash, completely unplayable. Base mod, no add-ons, forge and fabric both.
that's not the log.
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
what launcher are you using?
curseforge
alright grab the actual likes and pop it in chat here
how do i export the log file?
you just drag and drop it into chat here
Uploaded 2024-12-27-1.log.gz from @astral ember to mclogs: https://mclo.gs/9yeceig
i see a lot of red
is there any crash reports or hs_err_pid files?
when i hit report crash log it says there is none.
check main folder for the hs_err_pid files
this folder?
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
so switch from curseforge, which worked perfectly fine until i upgraded my motherboard and cpu?
you check your drivers see if they are up to date?
if i switch, im going to lose a 10000 day hardcore world
urse sadly has a ton of issues.
yes everything is up to date as of today
no you won't, as the command shows there how to move them
it def does lol
would feather or modrinth be better? ive never heard of that other launcher
not feather
so far atlauncher has been the most stable. and least resource intensive on computers
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
seems to be soon as i go full screen
I need the logs
Uploaded latest.log from @astral ember to mclogs: https://mclo.gs/I0gsm0Y
still no hs_err_pid.log file
ive got 16000mb ram allocated, 16 cores on cpu allocated
regular MC is also crashing on full screen so im starting to think its not the launchers
too much. use 8gb, which is around 8000mb
java hates too much ram allocated
fr? weird ill try that
ALso not the kind of game to need a ton of cores dedicated
its just my pc defaults, not app defaults
is there a wiki for bettermc 35.5
no. the questbook is your best guide within game
making and upkeeping guidebooks are expensive and hard to keep updated
that's up to you as the server owner
okay thank you
it doesn't hurt to turn it on and off
exit code -1073741819
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Please don't just share an exit code to us, that has no use to us and we need logs.
cant find anything about it anywhere. i even disabled scaling in amd adrenalin
ive already shared logs, admin couldnt find the issue
Hmm. Odd.
i see forums scattered with the issue but no solutions from microsoft. it worked perfectly find before i updated my gpu
updated java and it works on van mc. trying modded
what java version
usually from what I've seen a -107 relates to driver issues
its gotta be slobs
it worked fine, i loaded up obs and it crashed. i think this has been an issue before. testing again without obs
use original obs instead for recording
streamlabs had zero permission to use obs in their name btw.
not a fan of reg obs. any other suggestions?
i just need local recording, not streaming
what specific reason does it bug you?
not really sure lol
obs is perfect for recording or streaming.
i use to use it way back when xplsit started causing issues
ill give it a shot
i gotta get on this content making im already hours behind lol
just takes a bit of set up really, but it's the best option and it's open source
bet
absolute mood. I'm a few weeks behind on vids
hey quick question im using BMC (2) 1.18.2, i saw someone pick villagers up and place them in the inventory. I figured out how to pick them up but not how to place them in the inventory
Quick Question. HOW IN GODS NAME did you guys manage to make fabric mods work with a forge pack?
That's the neat part
-_- I ask because I did a pack update with a few mods and it crashed the server. Saying that the fabric mods are causing the crash
well likely then it's one of the external mods you added causing the issue.
what did you add?
let me get a list. Uno Momento
Bonjour, j'aimerais rechercher un mod en particulier mais je ne trouve pas son nom, lorsque je suis en jeu il passe plusieurs รฉtape avant de passer en pleine รฉcran quand j'appuie sur la touche "F11", le jeux ne se met pas directement en pleine รฉcran. Ce mod m'est trรจs utile il me permet de streamer correctement, puis-je avoir son nom s'il vous plait.
english please
Hello, I would like to search for a particular mod but I can't find its name, when I'm in the game it goes through several steps before going into full screen when I press the "F11" key, the games don't go directly into full screen. This mod is very useful to me it allows me to stream correctly, can I have its name please.
Think that's from vanilla?
check your keybinds menu to see if it's there and it may be changed?
Ok i will check
I added a couple of mods to the pack earlier this evening but i removed them all because I'm having an issue with my game crashing at start up even after I removed them all. Would I send the error logs here for someone to look at?
why did friend&foe crash my server then a guy have 3 on him and died then the server crashed and got timed out
BMC4
newest version
(forge)
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
can any look at my report
So I downloaded a Cobblemon client to my Better MC Forge 1.21.16.5 and I can't play the game due to something with the Sodium lighting. How can I delete the cobblemon client to get to playing it again?
what launcher you using
can't see anything if you don't share what's going on
I'm using Curseforge and the Minecraft Java launcher. I'll send you the crash report screenshot
why did friend&foe crash my server then a guy have 3 on him and died then the server crashed and got timed out
BMC4
newest version
(forge)
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
it got timed out then a guy had 3 totems of illutons
Fabric loader
need to fill out all the other info too
launcher, not loader. wrong channel #better-mc-fabric
Oh, right.
why did friend&foe crash my server then a guy have 3 on him and died then the server crashed and got timed out
he had 3 totems of illutons in inventory
BMC4
newest version
(forge) 1.20.1 v35.5
I use curseforge
I havent changed anything in the modpack
i Host at home
and i got this from the crash log " ticking entity errors on everything that hits them, and causes a ticking player. "
tryed to see if i could disable the totems but i cant
1.20.1: curseforge: added then removed mods that I added: v35.5: game keeps crashing at startup: I would imagine the installation of the mods.
Uploaded latest.log from @pulsar compass to mclogs: https://mclo.gs/YzcUxIG
Uploaded crash-2024-12-28_02.24.14-server.txt from @cobalt shore to mclogs: https://mclo.gs/WWObAKj
install a fresh copy of the pack.
or switch to atlauncher see if that works
would that delete my world?
you can save a copy of your worlds somewhere else while you reinstall or change to atlauncher
ah ok gotcha
can i disable the friend&foe totems?
I couldn't find the mod because the modpack contains more than 300 mods but I was able to get a little video to show what it does when I press the "f11" key
hey guys, i tried to find the shader's pack button, but its nowhere tobe found on the video settings, any clues? i'm using latest version didnt change anything
search up shaders in the search bar and should pop thats what i did
is there any way to pass the enchantments from tools to book??
and another question, i use cage to catch mobs but i only can with small ones, to pick up any mob is there something?
Please read the full contents of the โ #get-support channel for us to provide assistance.
Please read the full contents of the โ #get-support channel for us to provide assistance.
you do not have java installed
Please read the full contents of the โ #get-support channel for us to provide assistance.
!alternates you didnt install the pack correctly
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
remove the mods you added
the pack already has graves
Please read the full contents of the โ #get-support channel for us to provide assistance.
I think that feature is part of the xenon mod, because it says it includes features of Embeddium Extras and I think it was originally in that, not exactly sure if that's is what your looking for though
honestly anyone know what the gravekeep looks like on the minimap
first modpack dont rlly wanna jus look it up but a description would be dope
@fallen owl requested deletion of this link.
is there a way to disable a certian mod/remove it from the pack?
the issue was that by some reason, oculus didnt installed on my modpack installation
please be more specific on what the issue is
Please read the full contents of the โ #get-support channel for us to provide assistance.
how is the server hosted
i will check again thanks for you help
Hooow thats it ! Thanks you so much !
I also wanted to ask you about the mod that allows you to choose the direction of the blocks. For example choose that the piston block is always placed face down on the ground
ยฏ_(ใ)_/ยฏ
It's hosted on a dedicated machine.
where did you change the ram amount
is there a list of every enchantment that can be put on like armor n stuff. Cuz I wanna know how to completely max out my stuff?
is there a mod in BMC4 that can extract the enchant at the tools and armor?
use the jei
its the search bar bottom right of ur inventory screen
like vanilla
no i mean i want to extract the enchant in the item
what should i use to extract the enchant
because grindstone will remove the enchant
dont think you can do that
alr thank you
yeah i know but there are alot of ench books that arent shown which items they belong to
does anyone know if theres a /locate command for the nether keeper and awful dungeon ive given up on trying to find both
My server keeps crashing due to the - "mod loading error has occured"
am i allowed to send photos here?
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
- 1.20.1, 2. Curseforge, 3. I tried to install an addon to update the status of the memory, 4. V35.5, 5. I have not gotten past the starting phase, 6. in the crash report it says for the description it says "Mod loading error has occurred", also it only stopped working after the server did a scheduled restart and I was still logged in when that happened . (sorry for messaging twice but when I saw what you need to do to get some support I did this) - I fixed it but I have another issue, The new description of the crash report is "Exception in server tick loop"
@rigid basin requested deletion of this link.
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
That is way too big of a message, for one.
For two: Modifying the packs means you go to #1061339968691257466 to ask for help.
oh my apologies
Yeah.
Sinytra's Connector
its a mod
Please read the full contents of the โ #get-support channel for us to provide assistance.
please send logs
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
!alternates you didnt install the pack correctly
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
are you using any kind of panel / server host?
yes
How do I upload a crash report?
Is there a clear progression outline/guide, or any speedrunning routes I can look for
There's no wiki, I tried looking at the modpack itself, and opening each mod opens another modpack, which makes finding a clear progression route difficult
Sure, lemme clear that up for you.
A "Better Minecraft Speedrun" would be anyone optimizing their gameplay to do anything as fast as possible. I figure that's the best place to look for stuff relating to a:
"Progression Guide":
I want to know the process of moving towards endgame in a guide format. There are 2, 3, even 5 hour videos on the mod, but no short, concise resources on that information that I could find. End game could be anything from Better Minecraft's final boss/es, or just end game in a sense that there's not much more you can progress your advancement.
Examples:
||Minecraft progression guide for beating the final boss: Enter Nether, get blaze rods, fill in stronghold, kill Ender Dragon||
||Minecraft endgame guide would probably look like: Find a villager, trade for emeralds, get enchanted gear, build farms for your pvp kit and any resources you value||
If there's anything else you need explained lmk. Any resources help, I want more game progression knowledge rather than going in completely blind. So I'm looking for resources that can provide that
uhh
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the โ #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
This is... Better Minecraft. There isn't really a one true "progression guide" for anything in packs like these.
There is some info in the pins, though... if any of that helps.
That's unfortunate 
Final question, is any of the information here outdated, these look like some tips I can use
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the โ #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
Anyone able to add little frames to the mod pack?
i got this eror
Uploaded crash-2024-12-28_02.24.14-server.txt from @cobalt shore to mclogs: https://mclo.gs/rK6pMjK
got 2 crashes in 24 hrs
How much RAM?
16 gb
how can i fix that i should do like this or no alert-month.mc.lunapixel.gg:57366
Uploaded crash-2024-12-28_02.24.14-server.txt from @cobalt shore to mclogs: https://mclo.gs/2mxAbpA
new crash report
who is umvuthi the sunbird? i was walking and i got a bossfight health bar?
im not allowed to allocate more ram in the java arg
hi does someone know if Rubidium is compatible with this modpack?
or any other way i can install shaders
Big Turkey freak.
If you can get one of the masks from those bird followers, and put it on, you can trade with Umvuthi... just like the Barokakas.
its on my server i cant allocate more ram i trought i could but i cant
You're allocating TOO MUCH ram.
Go down to 8.
but i cant its keeping on 4 gb ram all time in the java arg
Then you're... probably doing something wrong?
There's a server guide somewhere, just not sure what file you're editing or if you're saving your changes
Hey sorry to ask the samething again, but how do I install shaders? Im on v35
Can someone please help me fix this issue its so annoying and i tried everything and i still cant fix
when i enter buildings and also caves i get lagspikes
i followed the performance guide also
changed the ram allocation from 4 to 5 to 6 to 8 and the issue still persists
GPU usage is weird too its never stable
I have a problem after downloading the better mc forge modpack. Optifine, specifically the c button, doesn't work for me, has anyone ever encountered this? or does anyone know what it's called in the settings?
remove optifine entirely. you don't need it
it's not supported.
!optifine
It is highly advised to not use Optifine, as it is very glitchy, will increase loading times to upwards of 10 minutes, and will decrease your FPS substantially. All Luna Pixel Studios modpacks come with shader support without Optifine via Oculus on Forge and Iris on Fabric. Optifine is also incompatible with all of our modpacks. The game will not launch with Optifine installed.
If you are interested in Optifine alternatives for your own gameplay, you can find a list here
Note that a majority of these mods are already included in our modpacks.
For an indepth explanation of why Optifine is bad, you can read this document created by Sodium's developer, Jellysquid.
Alright, I just mean I want the approximation
approximation?
I mean the functions of Optifine. I saw on YouTube that there is something called zoom vision
there's zoom on bmc iirc
Yes, but it doesn't work for me and is there a known solution or a way to find it?
could try to find a specific zoom mod to add, but optifine is not worth the optimization drag just for a silly zoom
yeah that's true, but when I was talking about optifine, it was originally only this to mean
you already have shaders, video settings then top right
if you want to add other just drag them into the shaders folder
oh ty
In the variables.txt file.
can you screenshot it
No, I have a dedicated machine
I've been tracking it in task manager and it never exceeds 4g, and I've tried editing the Xms as well and still pinned at 4g
did you change it in variables.txt?
The screenshot is from variables.txt
if you are using start.ps1 or start.bat to run the server it should use those numbers yea
I am indeed using start.bat and it is ignoring variables.txt. Thats why I'm asking for help.
Its still pinned to 4g even after editing and restarting the program and machine.
are you on windows?
How do I put a backpack on the shelf
I keep getting this error code when I try to boot up the game
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
windows server 2022
use the start.ps1
it may not be the answer for the ram part, but that's what you should use for windows servers
it shouldn't be from a bad download either cause that's not what would cause it to keep reverting.
I have to go to work, I'll be on this evening to troubleshoot further. Any advice would be helpful. Thanks guys
How do I upload the crash report
drag and drop it into chat here
make sure to answer the questions too
- Version 1.20.1
I'm using Curseforge, haven't changed the modpack, I'm on version 35.5, the game always crashes, and just booting up the game causes the crash
I'm still working on getting the crash report
you just drag and drop it into chat, you don't modify it. it's not getting picked up by our bot
like copy and paste?
drag it over from your folder into chat
Uploaded crash-2024-12-28_12.47.26-client.txt from @vocal scaffold to mclogs: https://mclo.gs/cp8YQIM
is there any hs_err_pid files in the main folder?
how do i check that
open the folder for the modpack. scroll down
how exactly would i get to the folder
go into curseforge, right click the modpack, open folder
it'll be a file in the main folder that opens up
there are not any
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
then likely curse goobered the download. wanted to make sure it wasn't a driver issue first
hey sorry to bother you but that isnt showing in my vidfeo settings
Hello Hello,
ive just Downloaded the Better Mc Modpack through Curseforge, and wanted to add a couple mods like Iron Chests for example. so i went to the Profile options, Ticked the box saying "allow Content Managment" and added the mods. once i started the modpack up in the mainscreen it show me a messsage saying: "you have added a mod that is incompatible with our modpack! Please remove any extra mods you added to the modpack antil this warnig disappears."
now are my Questions:
-
is there a list of the Compatible mods?
-
can i somehow turn that off so i can add other mods?
thank you in advance!
you added essential?
Generally every mod i add
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the โ #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
stop using it. trust us, it's been nothing but disaster of a mod
even after i remove essential. its still showing ;-;
likely another mod is added that has essential as a dependent, if not redownload the pack and install your other mods cause it likes to stick worse than super glue in files even when removed
ill try thanks !
hey is it possible to play my world which is in version 35.5 to a 35 version?
bc i just wanna be able to grow my crops all seasons ๐ค๐ค im a peaceful player
no. you can't downgrade without issues. use the latest version
what launcher you using
CurseForge
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
oclulus for forge, iris for fabric
I decided to create a new world, mine corrupted for whatever reason, the changes between V35.5 and V35 are noticeable?
Hey sorry to bother you, but is distant horizons compatible with version 35?
that's why we don't want people using essential... it corrupts the worlds.
use older version of DH, you need to play on latest version of the modpack.
works everything now!
how can i send the required Infos to my friend so he can join?
/ what do i need
Okk ty
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Quick quesstion you guys:
which one of the mods that are in BMC4 are the mod that give the villagers names?
anyone knows which one is that?
yes it was, thank you ๐
hello guys
how can i fixc the problem with connection time out:no further information
in bmc4, the waypoints aren't swapping from overworld to nether, any suggestions?
Question: is there any seed map look up that works with better mc? i looked up my seed the normal way and nothing is where it shows.
ive covered like 100 chunks trying to find a village and no luck
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
can i use essential mod on this modpack?
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the โ #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
chat gpt lied to me ; (
answer all the questions pls
chat gpt does that
ChatGPT lies a lot. By making things up it reads about.
Fine, it's good at code
The Essential mod is not workin whaaat
Before, this mod pack was valid, in the previous versions of the essentials mod. I donโt know why they donโt let it be played now, I miss playing with my friend haha.
you have other better options
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
i will try thnxs
1.16.5 is working?
bmc 1 forge?
yup
where do i find the Better minecraft plus 16.5 modpack?
And how do I get the IP to show up? Only the port shows up, I don't understand haha
not a thing anymore
curseforge
if the ip doesn't show up, then that means slots are full currently
BMC+ isn't available anymore nor supported
whyyyy it was so funnnn
it was replaced
How did Luna Pixel Studios became so popular?
so what i can do? xd to play with my cousin xd?
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
could try those methods, or just wait a bit see if a slot opens up
thanks
ive been wondering that too
this server has like 150 000 members
thats alot
i swear nether cities have the most absurd loot over all this modpack
can someone please help me fix it its so annoying and i tried everything, i think it has to maybe with the garbage collector but i am not sure, so please if someone knows any tricks or things that i can do to make it run smoother tell me !!!
not one netherite block
but 4
thats crazy
I'm playing bmc4, and using the uncrafting table to get a bunch of diamonds, xp tomes are so useful so I don't waste a bunch of xp while using it
guys what would be conciderd the hardest boss in this modpack?
My daughter just tried to use a respawn anchor for the first time to revive a beloved lost pet by putting it's collar into the respawn anchor. Immediately upon putting the collar into the respawn anchor, it exploded, killing her with fire damage and destroying important items in her base. Anybody have any clue what happened?
All that crying obsidian gone ๐ฆ
Please read the full contents of the โ #get-support channel for us to provide assistance.
read the questbook ingame
please redirect people to the questbook next time
Please read the full contents of the โ #get-support channel for us to provide assistance.
Please read the full contents of the โ #get-support channel for us to provide assistance.
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
you dont need the port
its a boss
be more specific please
all of our modpacks are already fully optimized
the pack already has shader support
is there any mod for night vision? like pendant or amulet??
video settings -> shaderpacks
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
you did not follow the performance guide
you have 4gb allocated
and you're still on java 17
please follow the full guide
you need a spyglass to use zoom
set xmx and xms to the same value
Please read the full contents of the โ #get-support channel for us to provide assistance.
!alternates you did not install the modpack correctly
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
read the changelog
Please read the full contents of the โ #get-support channel for us to provide assistance.
please answer all questions
do not use chatgpt for mod-related issues
play prominence instead
read the questbook ingame
respawn anchors are nether-only
thats how it works in vanilla minecraft
I'm good thanks
how do you expect us to help if you dont want to provide info?
ive been trying to launch bmc4 on forge for the last like hour, ive reinstalled the mods and minecraft, allocated more ram, and updated every driver and it just crashes on the loading screen and says exit code 1, can anyone help me out
I've been trying to load my v35.5 world on ATLauncher, I last ended up at the world border to kill a farseer, but now whenever I open the world, I just get stuck on "Loading terrain..." and the application stops responding
Here's what the console has looked like for the past 5 minutes
yeah i keep getting this, and it doesn't give me a crash report
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
answer questions above
Please read the full contents of the โ #get-support channel for us to provide assistance.
Please read the full contents of the โ #get-support channel for us to provide assistance.
read the questbook ingame
it says i have an unstable mod but i do not know which one it is
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the โ #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
Hi all, I tried searching but could not find what I am looking for, I installed the Better Minecraft mod to play around on, but for the life of me, I cant figure out how to add/equip a, for example," gloves, I picked up chain mail gloves but cant equip it. If I drag it to the hands' slot, nothing happens. (Hope someone can help me out)
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
1- 1.20.1
2- CurseForge
3- no
4- v11
5- the game starter to crash today, but the server was up for more than 3 consecutive days
6- opening the server.jar, when i get into the server, it shut down imediatly
Uploaded crash-2024-12-29_04.43.41-server.txt from @lunar compass to mclogs: https://mclo.gs/frxIvfr
does right clicking with them in your hand equip them, like they would armor?
v35.5 1.20.1 on CurseForge, modified with Create and addons (which are yet to pose a problem), I have never gotten past the crash condition since updating to v35.5, downgrading doesn't work either; whenever I launch BMC4 from CurseForge and hit play from the resulting Minecraft launcher window, the launcher instantly crashes and gives me error code 1 without even giving me a crash report. Should I provide a latest.log?
check for an hs_err_pid file
what folder would i find that in
i don't see anything such a file in crash-reports
here's the latest.log tho
Uploaded latest.log from @lunar birch to mclogs: https://mclo.gs/GC4IVMe
main folder of the modpack, just scroll down
don't seem to have one :/
you on mac?
!alternates use the one on the right side
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
ok but also atlauncher is struggling to open one of my worlds
struggling how
like it won't open it
then grab logs from atlauncher.
it gets stuck on "Loading terrain..." and the application stops responding
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Uploaded latest.log from @lunar birch to mclogs: https://mclo.gs/q37StGT
any crash reports or hs_err_pid files?
Uploaded hs_err_pid45313.log from @lunar birch to mclogs: https://mclo.gs/4rS7KHP
:warning: This is a hs_err_pid file.
These files may contain personal information such as your session token.
Mclogs automatically censors these files, so you should delete your original message now.
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
it still says java 17 in your log you just posted, is that a new or old one?
uncheck use java provided by minecraft
already unchecked
!alternates you are on a very old version of the modpack
wanted to make sure it wasn't an older log first
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
go to instances click the settings button next to the better mc forge instance
send a full screenshot of the java tab
and screenshot it
the latest.log or the hs_err_pid?
it's using the launcher default
click java/minecraft and screenshot that as well
then run minecraft?
mhm
@urban atlas could help further
hes the mac guy
i literally asked for a map viewer that works with your mod, which should be common knowledge, was told to provide info, which I did as a few of the questions did not apply as it was not mechanic or crash related. I did what I was asked to do but get slack over it.. you guys made the mod, it was a simple question which the devs should know. Sorry if that is confusing or too much to ask?
im highly doubting any of that has anything to do with a seed look up map viewer, what would be more relevant is if im on super flat, amplified, etc..
please look closer at the exchange
nobody asked you for logs
you replied later and gave the guy minimal info, then he asked for more as it's hard to keep track of who we asked which question
then i told you to elaborate as i assumed you were having a crash
in the first place, nobody asked you for any logs/info
but asking about crashes, i provided the other information immediately.
you didnt need to provide any info in the first place, and once you did we just assumed you were referring to a crash you were having
and to answer your question, there is no seed maps no
just use the /locate command
oh i see, i thought it was in response to me
i did /seed and copied and look all over the internet for a map viewer that would work with amp+biome but had no luck, thats why I came here
i tried many, that told me i was in a cherry blossom biome when i was in lavender, i figured if anyone knew it would be the mod devs
I have yet to find any kind of guide with crafting/commands/mechanics and features so im not sure what the /locate command is. I'm also on hardcore so most commands do not work. I'm doing a 1000 days series, maybe even 10000 days if I survive that long, so i just wanted a little help
ok i've been waiting for the world to open for 15 minutes...imma assume it's still busted. could this be a performance thing? like would going through the performance guide somehow help this?
you should follow the guide yes
press escape
open to lan
allow cheats
then use /locate ingame
thats all
mmm there's no reason this shouldn't work
try using Prism Launcher, ATLauncher is fucky sometimes
damn.
even when using the jar version of atl?
I feel like if you're using the .jar version and not the .app version it might have trouble launching external JDKs
ok i just tried to create a new world on prism launcher and it crashed
Hi guys, I killed the snow queen but the acid rain still there.
got a log?
we'd been suggesting using the jar over the mac app version for some time now.
oh? any reason for it?
can you post the full thing? typically crashes in the runtime happen due to the jdk
some issues with certain mac versions having problems, but the jar seems to fix those issues, I am not sure of it entirely, that'd likely be a question for either chloe or maybe ozzie on why we've been doing this?
is clicking the "folder" icon supposed to open it?
The achievement pop up but the acid rain still there
on prismlauncher, how do i actually access the modpack's folders
Folder button
ok it's not doing anything
try right clicking it in the main window and there should be an option there too?
is there any mod for night vision? like pendant or amulet??
otherwise right click Prism Launcher.app > Contents > etc. there's instances somewhere in there
Are there any specific way to kill the queen to finish the quest? shes that last boss for my quest list to kill
yeah this folder icon isn't opening anything up
try restarting prism ig
try this then
sorry im a luddite where is prism launcher.app
wherever you downloaded it to. Either ~/Downloads or /Applications
Ideally it should be in /Applications if it isn't
ope found it
i can't seem to find instances in any of these folders, or am i just blind
Resources I think
Interesting. MacOS?
yeah
I mean, what's in the MacOS folder
platforms maybe
It could also be a hidden folder, try Cmd Shift . to show hidden folders
and then go looking again
should anything new have popped up?
it seems like nothing's changed, so im wondering if the cmd shift . actually worked
hmm, maybe its actually in application support instead
do Cmd Shift G and type in ~/Library/Application Support/PrismLauncher
latest.log first
Uploaded latest.log from @lunar birch to mclogs: https://mclo.gs/abEKe1Z
java version 17.0.8 by Microsoft
did you set the JDK in Settings?
Java > Java Runtime > Auto detect > JDK 21
Uploaded latest.log from @lunar birch to mclogs: https://mclo.gs/SzA08Mj
right click on your Instance > Edit
maybe there's a Java override in there
right click > edit > settings > java
is this enabled? (it should be disabled)
Hey quick question i download the better mc mod pact and added on the box of horror mods and herobrine mod pact but i havent seen any box of horror mobs any suggestions?
!modified
ok unchecked java installation
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
it was enabled, i've disabled it now, running it again
so where do i go
read the command
Uploaded latest.log from @lunar birch to mclogs: https://mclo.gs/1ggCGku
at this point, would uninstalling 17 maybe help?
well the specific version and "provided by Microsoft" is implying that it's not an installed version but i guess you can click Auto detect again and show us which are installed?
yes, select 21.0.1 aarch64
ok bc it keeps reverting me to 17
like
i click Auto-detect, select 21.0.1, hit OK, it appears in the box beneath "Java Runtime"
and then when I click Auto-detect again, 17 is still starred
i feel like your system might have some permission issues
i dunno 

