#unofficial-setup-help
1 messages · Page 119 of 1
Ark adds like 30pounds to everything
Hi all, Any server owners use a server manager?
Heya me again! So i added these lines to my sp world to block flyers from being transfered, scs ball and cryos from releasing them.
Game.ini under [/script/shootergame.shootergamemode]
PreventTransferForClassNames="Argent_Character_BP_C"
PreventTransferForClassNames="Moth_Character_BP_C"
PreventTransferForClassNames="Pela_Character_BP_C"
PreventTransferForClassNames="Phoenix_Character_BP_C"
PreventTransferForClassNames="Ptero_Character_BP_C"
PreventTransferForClassNames="Quetz_Character_BP_C"
PreventTransferForClassNames="Rhynio_Character_BP_C"
PreventTransferForClassNames="Tapejara_Character_BP_C"
PreventTransferForClassNames="Wyvern_Character_BP_Fire_C"
PreventTransferForClassNames="Wyvern_Character_BP_Lightning_C"
PreventTransferForClassNames="Wyvern_Character_BP_Poison_C"
PreventTransferForClassNames="Wyvern_Character_BP_Base_C"
It worked like a charm in SP! but dose not seam to work on our unoffcial Aberration server. Any clue of what could be goin on or what i could have done wrong. double and tripple checked the file, technically it should have worked
is there some chance to reduct/disable timer on dinos which i want to put into cryopod after they will get hit?
Did you add these lines into the server files or just your game files?
server file over at Nitrados 😆
only thing i can think to check is that they are actually in the server files nitrado side
use a cryo mod, i think thats the only way , u can have look through here for all the configs
https://ark.wiki.gg/wiki/Server_configuration
has anyone else had issues with cuddles recently? seems no matter what you change the value to it will not change, just the requency, not sure whats going on
its certainly in there, tripple checked! - there only one game.ini on a server ight? not that im missing something obvious that i should have know 😂
yea just the one, i only asked because nitrado ui can be buggy/laggy an sometimes the changes dont actually get into the .ini
does the mod have any alterations that can over ride it ?
@heavy juniper You could try this code PreventDinoTameClassNames="Wyvern_Character_BP_Base_C"
yea made the experiece of that too, checked again but they definitly are in there 😅
ill give it a shot, thank you 😄
If it works you can just copy and past all this PreventDinoTameClassNames="Wyvern_Character_BP_Base_C"
PreventDinoTameClassNames="Wyvern_Character_BP_Fire_C"
PreventDinoTameClassNames="Wyvern_Character_BP_Lightning_C"
PreventDinoTameClassNames="Wyvern_Character_BP_Poison_C"
PreventDinoTameClassNames="Ragnarok_Wyvern_Override_Ice_C"
PreventDinoTameClassNames="Pela_Character_BP_C"
PreventDinoTameClassNames="Ptero_Character_BP_C"
PreventDinoTameClassNames="Quetz_Character_BP_C"
PreventDinoTameClassNames="Griffin_Character_BP_C"
PreventDinoTameClassNames="Moth_Character_BP_C"
PreventDinoTameClassNames="Argent_Character_BP_C"
PreventDinoTameClassNames="Phoenix_Character_BP_C"
PreventDinoTameClassNames="Tapejara_Character_BP_C"
PreventDinoTameClassNames="BionicQuetz_Character_BP_C"
PreventDinoTameClassNames="Owl_Character_BP_C"
PrevenDinoTameClassNames="TekWyvern_Character_BP_C"
PreventDinoTameClassNames="CrystalWyvern_Character_BP_WS_C"
PreventDinoTameClassNames="CrystalWyvern_Character_BP_Ember_C"
PreventDinoTameClassNames="CrystalWyvern_Character_BP_Blood_C"
PreventDinoTameClassNames="Snow_Argent_Character_BP_C"
PreventDinoTameClassNames="Bog_Tapejara_Character_BP_C"
PreventDinoTameClassNames="Quetz_Character_BP_Rockwell_C"
PreventDinoTameClassNames="Owl_Character_BP_Eden_C"
ok after further testing this dose sadly not work 😅
also found tha the previous setting of
PreventTransferForClassNames="Argent_Character_BP_C"
PreventTransferForClassNames="Moth_Character_BP_C"
PreventTransferForClassNames="Pela_Character_BP_C"
PreventTransferForClassNames="Phoenix_Character_BP_C"
PreventTransferForClassNames="Ptero_Character_BP_C"
PreventTransferForClassNames="Quetz_Character_BP_C"
PreventTransferForClassNames="Rhynio_Character_BP_C"
PreventTransferForClassNames="Tapejara_Character_BP_C"
PreventTransferForClassNames="Wyvern_Character_BP_Fire_C"
PreventTransferForClassNames="Wyvern_Character_BP_Lightning_C"
PreventTransferForClassNames="Wyvern_Character_BP_Poison_C"
PreventTransferForClassNames="Wyvern_Character_BP_Base_C"
actually just prevents us from uploading the said creatures now from aberration XD so they can get in but not out, the revers of what i would like 😂
at this point im hoping This whole zeppeling thing as flyer was a huge oversight from wc part, which made it impossible to disable flyers on aberration without screwing over the zeppelin enjoyers 😂 im hoping once official server open for transfer they figuer something out - unless they just not allow foreign dinos 🤷♀️
@heavy juniper someone said this works but i cant try it as i host from my own server but for Nitrado is there a [ServerSettings] and try this code bForceCanRideFliers=false
this code disabled the ability to use zeppelins XD
tryed that one already
Ah ok, lol well Im out of ideas now 🙂
😂 yea this was a huge oversight on WC part 😂
@heavy juniper have you gave this code ago? CrossARKAllowForeignDinoDownloads=
they dint really care as officials block non ab dinos, so no problem for them .
i did just trawl through dino depot configs , looks like it might be able use a dino white list or black list but i need dig further on how there setting it up
yep
hmm maybe there is actually even a mod that could help...
i wouldnt use the whitelist, you have to put ever ab dino in there plus the none ab dinos you want to allow. be a long list to make
list are dinos BP's
anyway thank you guys 💜 very much appreciate the effort and help!
Anyone still having problems with ab drops resetting to 0 loot table. Green just gave 2 wood walls 1 wood ceiling an a wooden crate we had the value set to 1.5
rng, quality doesnt really effect whats going to be in them, just improves the good things when you get them. u wud have recode all the drops with beacon if you dont want that sort thing
We did use beacon an had the drops all the same on each map boosted server so boosted drops
the drops arent the same for each map, they mostly need to be coded for each map
are anyone else's 90% nights broken? our server is 50/50 at all times even when it says 90% night / 10% day
yea its alll messed up
Great my Abb server keeps restarting now to figure out if it’s a mod doing it😭 all my other servers are just fine
If they're all using the same mods, it's probably not a mod, if they're all up to date. If it's a nitrado server, that's just nitrado tbh.
Yeah all set up the same ima just shut it off for a bit hope it fixes itself
Or they fix it lol
It usually does, on the rare occasion you'll have to rollback or reset it.
Anyone experiencing horrible lag via nitrado? It takes us a second between hitting E and something actually happening (as an example it isnt just this button lol)
The cluster I'm playing on has the same problem
Anmy1 else having some weird problems? Sometimes i hear a cat crying in ark, then a super loud monkey and then a woman laughing 😂 Is my ark cursed?
definitley
Ok so I am trying to use the mod map Amissa
However the map won’t show up
In the launch script do I type Amissa or do I put the mod map code
I did that and it shuts down now
Hang on I’ll post script
"Amissa_WP" "-port=xxx" -WinLiveMaxPlayers=10 "-mods=965379 ,929868 ,928621 ,947835 ,949521 ,939055 ,935528 ,942024 ,943713 ,944994 ,947709 ,1009361 ,933301 ,924900 ,1079535 ,912815 ,1007416 ,1075094 ,1075483 ,958282 ,1050566 ,1011119 ,945918 ,1057183 ,1050885 ,929072 ,991503 ,950657 ,1002321 ,981599 ,1021294 ,947091 ,1036007 ,954199 ,956237 ,937143 ,1005549 ,929830 ,999254 ,1013349 ,957904 ,1072821 ,951279 ,963130 ,931549 ,992933 ,1067961 ,1069026 ,1005286 ,944345 ,1015347 ,959391 ,954038 ,1059989 ,1040043 ,1067560 ,950239 ,930684 ,1038262 ,981391 ,1029377 ,981989 ,974472 ,966352 ,935946 ,953108 ,1056795 ,1024911 ,987274 ,961162 ,908148 ,942008 ,932822 ,994715 ,955932 ,965961 ,1065116 ,965992 ,965957 ,957093 ,940018 ,1066794 ,926259 ,975282 ,916922 ,928824 ,928548 ,929110 ,900062 ,926956 ,927131 ,914844 ,1007609 ,929420 ,929506 ,933872 ,933447 ,935408" "-clusterid=xxxx" "-ClusterDirOverride=C:\Users\xxxx\Documents\ASA\Cluster" -ServerPlatform=ALL -log -servergamelog
what is that some sort of server manager ? an sry but i cant deal with crazy , thats way too much mods for me to deal with
the mod map name is right, i just checked on curseforge
yes that is my favourite thing lmao, all or nothing
Anyone having issues on steam cmd private server with invisible Baskalisks? They are underground while attacking me and I cant see them.
Well, WC must have updated and changed something, We use ASR and also Ozocraft, and everything with ASR broke, can't craft or learn engrams, and Ozocraft won't place anything shows green but never places on applacian map, any seeing similar with those mods?
that sounds like a bad mod update, remove mod close game, open game reinstall mods
testing now, uninstalled both, restarted ASA and installing again
I added Scorched Earh as Clustuired map (originally standalone Aberration)
- When setup cluster id
- Added custom cluster path
- Setup same GUS.ini & Game.ini
- Setup same mods
But when I join Scorched Earth, my game crash :(
I think the issue was I never updated it lmao
#1 added to what ?
#2 just becuase mods work on one map doesnt mean they will on another
#3 its best to start with a clean fresh map , no mods , test that then add mods etc
now youre at the point of, i dont know what caused issues, so, u can check the crash reports, hopefully summit obvious , other wise, just process of elimantion
and sadly in my case uninstall and reinstall didn't help anything with those mods, I'm guessing something needs to be updated after the last updates they did to ASA
Anyone else out there having trouble with aberration loot tables regarding the supply crate quality ini?
I feel like my ini files arent being read properly by Nitrado to be honest
Do u put these commands in the ini under game.ini or user.INI settings?
To Prevent people from using flyers on abb.
"Disable cave flyers" does not work and we can still use flyers in the nitrado setting
PreventDinoTameClassNames="Wyvern_Character_BP_Base_C"
My server has 0 ping, what does that mean, when I join it is black and shows nothing
It is port forwarded and worked yesterday, only thing I changed was I added ruinic wyverns
Can I copy and paste ini files and just change the server name? From my other map maybe something is messed up
Also when I went into abb ini settings it opened up every ini setting I have and wanted me to save changes to island I think now but idk what it did
Ok it loaded up but I can’t get out of bed
We have the same issue. Sometimes one of us can see it and the other not and sometimes noone sees it. 🤷♀️
I want to say I can follow these issues, but nope, I cant. No idea what’s happening.
Has anyone had issues with Modded drops not working on their servers?
Is SE supposed to be on a different version of the game than the other maps? I have restarted the server a few times and it doesn't change from v52.14
? steamcmd updates the server binaries
Is anyone able to tell me what I'm doing wrong here? I have the following in the bat file for my ab server, but it looks like people can still transfer in from other servers on the cluster with items in their person.
?PreventDownloadSurvivors=False ?PreventDownloadItems=True ?PreventDownloadDinos=True ?PreventUploadSurvivors=False ?PreventUploadItems=False ?PreventUploadDinos=False ?noTributeDownloads=False
Also, when it comes to preventing "non aberration" tames on ab, do i need to do any special configuration to mimic official?
in command line you cannot have spaces, and the ? character acts as a separator
example from my server
?AltSaveDirectoryName=Aberration_WP?PreventDownloadDinos=True?PreventDownloadItems=True?PreventDownloadSurvivors=False?PreventUploadDinos=False?PreventUploadItems=False?PreventUploadSurvivors=False?ShowFloatingDamageText=True
notice no spaces
this directed to me? if so I do not understand lol
Why does my server keep updating/restarting every time I try to log in? I have tried rolling back a backup but nothing has worked
Yeah steamcmd updates the server, not the server itself, whatever you use to manage the server you need to make it update
Given I run my servers on my own machines, I just use steamcmd +force_install_dir %DIR% +login anonymous +app_update 2430930 +quit
Where %DIR% is the isntallation directory (updated since it was steamcmd, not steamdb oops!)
okay. all the other servers update just fine so not sure about SE. will look more into it. We also run the servers on our own machines
My guess given you use a batch file would be that perhaps you forgot to update a path in one of the files so your "SE updater" actually updates another installation :p
I tried to remove the mods I had put just before it started to happen and things still wouldn’t work
Hey eveyone, I'm trying to play the new map with my friends but I keep getting a Fatal Error: The UE-ShooterGame Game has crashed and will close, Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading addredd 0x00000218d8358fac
is there any way to fix this? I'm on PC
How to install mods to self hosted server?
-mods flag in the command line
it's a comma delimited list of mod ids
example: -mods=123,124,125
We have a strange thing on our dedicated server. I have copied the mods to the Content/Mods folder but without the files with extension .mod (there is only one 111111111.mod which seems to be the primitive plus mod). When I start the server, it don't load the mods. Are these .mod files not created automatically?
Is it possible for me to host an ARK server from my PC, let everyone upload their characters to the cluster, and then we go on Nitrado and download them into the new Abberation map?
tl;dr - need a way for us to transfer our characters from the last map to Abberation with only one Nitrado server.
Haven’t tried that, but it should work, I would confirm this with nitrado
this wudnt possible, you have no way to cluster to a nitrado server outside there network.
the easy way , rent a server for 3 days , cluster it , then transfer like that
slightly harder way ftp connect to the server , pull the save data, then change the map and only put back in the .arkprofiles.
(i suspect with the way asa saves map data that you might not need an ftp copy, however it wud be for the best incase anything went wrong)
Another way is to let people upload to there single player, then download to the new map , its a bit of pain an semi risky with data loss
Anyone having issues with CrossARKAllowForeignDinoDownloads=True setting on Aberration? it saves, but then as soon as the server restarts it vanishes from the file again
Not a set up question but does anyone know if the SummerBash event stuff is in the base game yet ?
Ppl been asking to remove the mod b’cos of off the annoying intro
yea it is
Good to know Ty
I must of missed that in the patch notes
you didn't miss it in the patch notes because they never told us. But it's been a frequently asked question here and most people took it off some time ago - probably because of the annoying intro!
Still, soon be time for Raptor Claus
Hi guys, is there a way to grant all explorer notes to a player?
The server I'm playing on is wanting to set it up as additional rewards for meeting certain conditions, however I can't seem to find any information on how to make this happen
If you're using arkshop you can grant them the permission to buy all the explorer notes
Hello, can anyone help me? I have the nitrate server but when they try to join it puts lost connection with the host and does not let me join, I tried everything, backup, restart etc etc and it doesn't let me what can I do?
Anyone know why the Zeplin on my server is not working like not able to fly
do u have no fliers on ?
contact nitrado support
Where by email or where?
Thank you!
in there control pannel is usually an option to contact support
as a side note make sure its set to allow your platform in the general settings
Yes but otherwise people can download their flyers
I run all the maps so far
in a cluster
yep it blocks zepplin flying,
if you dont want non abberant dinos on the map use
CrossARKAllowForeignDinoDownloads=false
How will this work as i use the scs terminal mod end people have the scs balls on them when they travel?
its just all can do at mo , u can try blocking all flying dino with
PreventDinoTameClassNames="Argent_Character_BP_C"
etc
dont know if it works, it wudnt for someone using super cryo storage mod
i dont know if scs will just overirde it, you wud have to test it
I'll try, thank you kindly
If scs honors the map restrictions it won't let them throw the dino out of the ball if crossarkallowforeigndinodownload is set to false
Impossible doesn't solve anything for me and doesn't let me leave the problem to them
Is there a way to increase the amount of linked storage a tribe can have?
seems noone answered you
yes automatic downloaded everytime the server loads.
this maybe a simple - missing in front of -mods=
aswell i use the commandline for my mod entries not the gus ini
Hi guys! I have a problem. When me and my friend are playing on the server I host, every time he gets further away from me than 200 m, he spawns next to me
any help
You're playing nondedicated on Ark Survival Evolved. That happens. You can change the tether distance in the settings if you're playing on Steam, but you'll still be teleported when loading.
i presumed if they were copy mods over like that it must of been an ase server tbh , adding mod entries in gus.ini will only give them a load order which asa doesnt seem to care about
always forget theres still some holding onto ase
i guess im guilty aswell keeping the full dlc cluster running lol
thanks. I had them in the .ini file, not the command line. For now, I just copied the missing file from my local installation. I'll give it a try, to use the command line next time.
are you on asa or ase?
ASE
that command wont work for you, thats the newer command for asa servers
I think its GameModIDs for the command line in ASE
idk tbh , never had self host ase server sry
Another think that I'm wondering: Why is the server always trying to start the New Year Event? I see it in the log output as one of the last lines when the map goes online. It's not an important question for me, because it always fails to start the event, and we don't want it. I'm just wondering why it always shows up.
couple things for ase
yes put the mod number id's into the gus ini under server settings ActiveMods=
aswell in your command line put -AutoManagedMods
and finally in the Game.ini create this at the bottum and add each mod
[ModInstaller]
ModIDS=2693727499
ModIDS=2693727499
ModIDS=269 and so on
and that will auto download and setup mods
and adding the commandline -ActiveEvent=none should stop it
Anyone know of a Mod that is simmilar to the S+ vivariums?
If you're on ASA, cybers structures has basically all of s+ functions and the vivariums
I got a question for anyone can help me real quick. Problem is I can't see supply drop beam at all. I tried to install and reinstall the game but no effect to it.
xbox series s? if so its just howe they are
If this is a Nitrado server, open a support ticket with them to resolve.
That is a problem if that's so.
is this a local session, Official , Unofficial, or Non-dedicated Ark?
I tried all servers
So, the lag in our server we turned off Crossark and Crossplay for Xbox and PS5. Now it is just Steam and Windows and no other servers connected. The lag is minimal which is what it has always been (Nitrado) 🙂 so for anyone experiencing problems try this out and see if it helps!
Try support
Anyone here using the ASR and ozocraft mods, been having issues since the last update with nothing all ASR dissappearing and can't learn engrams, and ozocraft won't allow any placement in ASA
I have tried removing all mods on both client and my server side with no changes, even tried updating the server again
There is a problem with the inventory, it crashes, when are you going to fix it?
How do i update my server on steam cmd
run the command you used to install it again
Is anyone else having a Problem with there stats being Different after Update I went and checked my settings and everything is still like I put it in but in game the Stats are way different
will it still keep all my progress and files etc?
also where do i put that command
Anyone else having the issue with the lighting aberration where everything's dark
I did that and the build number is still the same for the server on the list
r.lumen.hardwareraytracing 0 in the command line works for me
how did u install the server?
I have a admin giving me the rights to use admin for notes but is not allowing me access any admin right to get notes on Xbox did work before in single player mode
im trying to set up unofficial in asa, im trying to set up custom drops and trying to add all the saddles to my blue drops, is it all the same name IDs from ark evolved?
ok im having a huge brain fart how do u make it show the decay timers on the buidings in game
mostly yea, obv a few new things add5rd
we tried adding 50 saddles but some are not working, i was thinking that maybe they changed the name on some?
not that i know of but do u self a favour an get the ark beacon omni app/programme, drop editing is free in that iirc, makes way easy.
theres a link in th epinned messages of this channel
it pulls from the asa dev kit so , if it has changed it shows in that
Through steam cmd
u just use the batch file u installed the server with to update then , what version u on ?
is anybody else having an issue not being able to find/ join your personal server i had no issue the past fiew days and now nobody can join the server thats evin if they can find it
Is unofficial f***ed rn? My server keeps stopping. I’ve booted and loaded in a good 3 times and five mins later the server just stops each time
whats the config map name for abberation
i know the island is TheIsland_WP
nevermind
literally is Aberration_WP
anyone else having stupidly high ping rates on Ab servers? like 400-600 ping?
nope i was around 80 today
Anyone know if there’s a spawn command for specific traits on a dino? Looking to do an event on my server with a rare trait dino as the prize
Daily, tried all I can but no clue why it’s happening aside from the gene gun. Dino scan murders the ping while in use
Idk if anybody has this issue or not or if it’s even in process of being fixed but does anybody else crash everytime they open their inventory? Like Jesus I crash like 20 times a day everytime I open inventory like I’ll be able to open it a few times and then I crash the next time it’s rather annoying
Is anyone else having issues with getting their stat settings for dinos and players to stay what you set them at on Scorched Earth?
Is there a way to disable bobs tall tales content on a self hosted server
There is a mod I believe
I already figured out the pyromane I was just curious about BTT. Although BTT isn't nearly as bad
I'm still torn about it lol
yea can remove the dinos an engrams using code in the game.ini
Anyone else also having issue where sometimes players have to create a new character when they log back in, their old body is still there the game just does not see it?
Is it possible to change the fishing loot pool ?
Like to do a custom aberration fishing loot
I need help
I am hosting a nitrado server on ASE and I am on expert mode to disable foundation support but I cant seem to figure out how to-
Enable the death beam for your shit when you die
Enable friendly fire on PvE
enable structures plus pick up
game.ini
[/script/shootergame.shootergamemode]
bUseCorpseLocator=true
bPvEDisableFriendlyFire=False
gameusersetting.ini
[ServerSettings]
AlwaysAllowStructurePickup=true
look for the lines an change as needed , if there not there, add them
thanks, do you know if I exit expert mode will it all disapear form the ini?
once u have saved each ini with the server off, they shud stay, but there isnt any need to exit that mode
shud be fine
Thanks homeslice
What command lets me copy the target dino id to clipboard so I can teleport it out of the mesh?
I need the id for the TeleportCreatureToMe command.
I got it through ASV, but damn, they need a way in-game
Hi wondering if anyone can help i have rented a vps for ark ascended opened all ports plus one on game port windows firewall and with providers own firewall and keep getting time out error when i go to connect to the server
Are all maps meant to have the Cosmo reload ini settings on all maps? And set to -1? My servers are fritzing and this is the only new thing
anyone know how to increase the limit of the linked storage for my cluster?
ark ascended only needs the one udp game port open to be joinable, set with -port=, heres an example of a simple working batch file
Start ArkAscendedServer.exe TheIsland_WP?SessionName="my server name" -port=7778 -winlivemaxplayers=10
this ran from the same location as the .exe wud open the it, call it, my server name, use port 7778 udp and set the max players to 10
I have it showing up on server list when i am joining i keep getting connection timed out
lately players on my servers have been logging in to find they are presented with a Create Character screen... then when they make a character, they're able to see their original character sleeping where they last logged out... this is a pretty devastating issue, is this caused by server config or a bug in the game? this didn't start happening until recently.
yes often a sign the port isnt forwarded correctly, look up the server name on battlemetrics an see what port its actually running on
Will have a look at that now thanks
How i can set up max player level to 135? I get max level 95 without ascension level
nitrado or self host ?
self
its a cluster or single server?
a cluster but i've checked to make sure players affected by this are logging in and out of the same server
oh dam, ive only seen it happening after people transfer , that can be sorted using the other save format.
for your case , have u looked in the save file an see if there .arkprofile is still there after the issue occurs?
hmm what other save format? i can give that a try, it might help
does anyone know how to read crashstack files or could help me open/decypher one?
im not sure its going to help for your case tbh but i guess you can try . Make a full backup of the servers first , mark the backup as before change save format. If anything goes wrong you can always revert then, as this proces is not reversible any other way .
Then you will stop the server and add -converttostore -usestore -BackupTransferPlayerDatas to the command line .
Start the server and it will convert it, once the server has been run one time with this command , You can then remove the -convertostore part
ok thank you i will try this. do you know what the differences are between this save protocol and the default one?
yea it combines the .arkprofile an tribe data into the world save file
ok interesting, thank you, will give it a try
there is a server bug, the player profile is not being created when they transfer maps.
i didn't know this was a thing, i'll be doing this as well!
just be sure to make full backups an mark them seperate as the process is irreversible
i will.
Is there a server command to allow flyers in abberation on my server?
Allow foreign dino downloads and enable
bForceCanRideFliers=True
Can anyone tell me how easy/hard it is to rent a server please? Hoping to start one up on Friday as long as its not a pain.
renting a server easy , setting up how u want, not so much, watch a few youtube guides on nitrado server settings or something . to get an idea of what ure getting into
Cheers I'll do that.
Hmm doesn't seem to be working, it goes in the GUS correct?
the server default to flyers on, unless u messed with it , shud just need,
CrossARKAllowForeignDinoDownloads=True
in gus.ini under [serversettings]
hmm In Aberration?
if its nitrado server they do have a setting for that in the cross ark section too iirc
yea
people think its a cave but its not counted as a cave for map puposes
So they're able to transfer with cryo, but once they're their they try to uncryo and it says no flying class allowed or something like that
If I enable foreign dino, would they be able to download from other servers? I remember that being a thing just wondering
yes that what that setting does, allows no ab dinos on abberation.
if flyers were off, the zeppelin they added with the dlc wudnt work
Oh sorry I was thinking of transferfromfiltering outside of cluster, yeah I'll enable "CrossARKAllowForeignDinoDownloads=True " and see what happens thanks for the headsup!
you only need that if you dont have a cluster id setup, thats to stop people uploading from single player if no cluster id is set
look through the gus.ini for the bForceCanRideFliers=
line
nitrado fun, stop server, wait 5 mins, change the setting, save it, wait a minute, start server, there u/i is laggys asf
Worked!, Oh I preivate host. I stopped the server after I made the change so it overwrote the GUS file. did it correctly this time and its all good now! thanks!
oh always must stop server before making changes in ini
Anyway having trouble with a server getting stuck in restart loop since yesterday? My Ab server is working perfectly fine, but the other server in our cluster with identical mods is stuck in a restart loop. I have even tried un installing all mods. First time this has ever happened I’m at a loss
Y are there no Dino’s in the caves?
I’ve reloaded the game and Xbox and still nothing
Is it a bug?
contact nitrado support, in the mean time if you can get the force stop option, do so an leave it off for 15-30 mins, then try reboot it
I’m submitting a ticket now. I actually had it stopped all night and just tried to re boot when I got off work and it’s still looping so hopefully they have a fix that won’t erase all our builds
you wud hope so , i always took manual backups anyway . i assume you tried rolling the server back to a previous save ? as thats what support will first tell you to do
Yes I did sadly. It didn’t work either.
so ive been play abb with no issues untill yesterday where all of my game servers stopped allowing people to join they worked fine the day before {ports and firewall are good}
if you have any ideas let me know
Anyone know of the config for linked storage box capacity? Assuming there is one same as generator cap.
My server also will not let anyone connect to it (connection timed out message) was fine yesterday when i turned it off and now been trying for hours from pc and ps5 so assume its a problem with nitrado
Anyone else running ASR or Ozocraft mods on their server and having issues? Been having problems for the last few days, I've tried just about everything from uninstall mods, reinstall both server and client. and the maps are clustered also, it goes across all maps, all buildings using ASR vanished and Ozocraft won't allow placement.
Not sure what happened or changed to cause this
Anyone else get kicked from their own server when you try to go into admin mode ?
I had that happen once, but I think it was due to the admin console mod I was running being out of date
do i need to port forward inorder to join a server hosted on lan sever? to clarify, i can join through single player and putting open -ip address- but when i try and join through the unoffical list it times out
if you try to join a unofficial self hosted server, that server needs port-forwarding setup so it's public IP and port can be reached from the internet. The server starts, registers and thats why you can see it on the unnofficial list. If it times out when trying to join, it means that the public ip and port cannot be reached. Both port-forward needs setup to reach that server and make sure there is no antivirus or server firewall blocking the port also
thank you
I usually port forward just in case, don't hurt anything.
I have one in and out rule for game servers with the common ports IE 7777, 27015 etc
Hey, do i need to do anything else, just fire up the server, let it convert then bring it down, remove -converttostore and bring it back up?
HI can I get some help setting up a dedicated server please??
I'd it's really on the LAN, no I've never had to port forward it unless you have firewall rules blocking it. If you're connecting from the WAN, then for sure you need correct port forwarding and the server needs to be started with the -port option to make sure it's actually starting on that port.
I followed the steps here
https://ark.wiki.gg/wiki/Dedicated_server_setup
But my bat file is doing nothing
Are you gonna run one map or multiples scratch that I would get a server manager regardless there are several out there just depends on ur skill and functions you want
I use windows GSM it does need a plug in for ASA but it's simple and efficient others are using ark server manager
im using haru host, it works pretty well but some stuff is limited behind a paywall.
mostly backup stuff from what i've seen.
how do i update a steam cmd ark ascended server
Did we find out which mods are keep nitrado in a restart loop?
Nitrado?
steamcmd +force_install_dir <install_dir> +login anonymous +app_update 2430930 +quit
Need a bit more information besides it does nothing. Can you show what your .bat file looks like?
You also need to make sure it's actually a .bat file and not a .bat.txt file.
i thought it was app_update 2430930
Whoops. That's what you get for copying the wiki and not checking lol
I did those things but my server is still behind compared to everyone elses
You are running this on a server you can physically touch?
my pc yeah
I'm not actually sure what version we're on rn as they're doing updates pretty often
Looks like 52.23
yeah, mines 52.15 i think
So when you run that CMD as administrator in your terminal, what does it say/do?
I did steamcmd +force_install_dir C:\Users\name\OneDrive\Desktop\Steam CMD\steamapps\common\Server1 +login anonymous +app_update 2430930 +quit
I suggest moving the install to the primary C:\arkserver folder to cut down on that for simplicity's sake and adding in verify
wdym adding in verify
I meant validate
how do i do that
To make sure, the install is not corrupted.
+validate before quit
If you do the reinstall, the only things you need to move is the Saved folder
It has all your ark config files and the world data in Saved
For that server that is.
I currently run 3 servers on a cluster with a shared ark folder as it's required for any cluster to work. Each server has its own steamcmd folder like ArkServer1, ArkServer2, ArkServer3
Ill do the update stuff again and do the validate thing. It just takes forever to update lol
Well it depends on your connection speed 😦
usually 150mbs
I can probably get it in about 2-3 minutes
Validation takes awhile longer, but it's worth making sure the install/update is correct
Just remember if you run a server it's gonna eat your RAM alive. 😄
yeah, i have 32 gig and its only 2 people so im alr
I am not able to send screenshots but this what I have in my bat file
ShooterGameServer.exe TheIsland_WP?SessionName=Freddys?ServerPassword=!thisisme-port=7777-7778?QueryPort=27015?MaxPlayers=5?ServerAdminPassword=!thisisme
btw it is a bat file
should I just say 7777?
im hosting server where I am gaming from so firewall rule should'nt matter right?
ok. But for now there is no one joining and I have just specified the port 7777 in the script and ran it and it still opens nothing.....
the bat file is in this directory btw -> F:\Server\ShooterGame\Binaries\Win64
is that correct?
hi all. has anybody built / compiled from scratch to avoid the docker setup using opensuse? would really have liked it on ubuntu
cool thanks
well. my host OS is ubuntu and i'm running the ark ascended docker just fine
i just dont like opensuse and that was their decided flavor
at least linode is fine, i'm 22.04
oh really? yea i did a little general hardening of my linode instance, and then just pulled the docker image
let me find the article, and there is an assumption of basic linux level comfort
oh...its not letting me post links
I apologize bee. I'll keep my messages cleaner
In this channel, they need to be specifically Ark setup help, whether it is settings for sp, configuring mods, or unofficial servers
We're typically a little more strict when it comes to the help/media channels, you're fine.
is this for ark ascended or ark evolved server? you have mostly ase commands there but it gets confused at-port=7777-7778
asa
your batch file is trying to start an evolved server
oh wow how do I fix this?
heres a simple ark ascended batch file that works,
Start ArkAscendedServer.exe TheIsland_WP?SessionName="my server name" -port=7778 -winlivemaxplayers=10
if put in the same place as the .exe it will start the server , call it my server name , run on port 7778udp and have a 10 player limit.
hopefully that helps you undrstand how the commands work
oh wow it works
Guys what am i doing wrong to update my server, im doing this in steamcmd +force_install_dir C:\Users\name\OneDrive\Desktop\Ark Servers\Server1 +login anonymous +app_update 2430930 +quit
But my server is stuck in 52.15 instead of updating to 52.23
When i do that it does the entire update process but then proceeds to not actually update the server
yours shud look more like this,
ArkAscendedServer.exe TheIsland_WP?SessionName=Freddys?ServerPassword="!thisisme"?ServerAdminPassword="!thisisme" -port=7777 -winlivemaxplayers=5
note the commands start with ?command or <space>-command
also note some people have issues with port 7777, id reccomend 7778 if you still have issues
you are a life saver
can you graciously help me lol, im lost
try running it with validate in, see if it validates any files ,
+force_install_dir C:\Users\name\OneDrive\Desktop\Ark Servers\Server1 +login anonymous +app_update 2430930 validate +quit
if it does u prob have another folder inside of
C:\Users\name\OneDrive\Desktop\Ark Servers\Server1
likely called ark or ark1 that the server is installing too
When i do validate it say that the command doesnt exist
when put in a line like i did above?
how would i figure out where that server is installing to
yeah, ill retry now after i try updating again
id figure out why validate dont work first , thats kinda weird
when i open the server1 file it has the engine file and shooter game file along with dlls and txts. Is that right?
yea but is there another folder in there as well, ark or ark1?
How can I have my friends connect?
like can they search up my servername?
did you forward what ever port you set in the batch file through windows firewall or the router?
when i update it says, Success! App '2430930' already up to date. But my server isnt up to date
no I did not
do I do this?
New-NetFirewallRule -DisplayName "ASA Server" -Direction Inbound -LocalPort 7777,7778,27015 -Protocol TCP -Action Allow ?
and when i type validate in the command line it says, Command not found: validate
its installed it somewhere else likely then ,
prob becuase it on a onedrive folder
try this
+force_install_dir "C:\Users\name\OneDrive\Desktop\Ark Servers\Server1" +login anonymous +app_update 2430930 validate +quit
no , u only need the one udp forwarded inbound that you set in the batch file with the -port=xxxx command, where xxxx is the port number you chose
yeah thats what i already did
New-NetFirewallRule -DisplayName "ASA Server" -Direction Inbound -LocalPort 7778 -Protocol UDP -Action Allow
like this?
with the quotations?
yea that looks better, shud note i just do it manually though, i dont trust a script to actually work , but thats just me
alright i wasnt doing quoations, i didnt know that was part of it, its actually installing stuff now and going very quick. I think i had just installed like 5 differeing servers somewhere on my pc before lol. Time to try and find them
after running that command, check the folder, if there's another folder called ark or ark 1, you need to drop the last part off the file path an try again
also shud be able just search for arkascended.exe, it will bring up any locations its installed at ,
quotations are usually only needed on file paths with spaces in, but never hurts to just have them there anyway
that validate thing still isnt workling though
unsure why, are you runnning it as a batch file or just putting the command in the stmcmd window?
it now also has the steamapps folder after doing the update thing
command line in steamcmd window
thats good seems like its installed correctly
prob why then , i run it as a batch file so i dont have keep open the stmcmd window an type it out
what does your batch file look like
mine looks like this start C:\SteamCMD\steamcmd.exe +force_install_dir "C:\Arkserver1" +login anonymous +app_update 2430930 validate +quit
you wud have to change the file paths to your install locations
oh like copy and paste (+force_install_dir "C:\Users\name\OneDrive\Desktop\Ark Servers\Server1" +login anonymous +app_update 2430930) into the batch file?
that makes it easier lol
you know how to make a batch file? just make a new one , call it arkupdate or what ever you want and change the file paths
you might have an issue if you installed stmcmd too the one drive folder though a need use
start "" "C:\SteamCMD\steamcmd.exe" +force_install_dir "C:\Arkserver1" +login anonymous +app_update 2430930 validate +quit
@distant hearth ran this on powershell and restrarted the server but I still cant find it under official?
unofficial I mean
did you forward through the router too? plus any external anti virus you might be using, norton avast that sort shit
oh router as well? ok will do that now
thank you so much, its all working now
See? Dude knows his stuff 🙂
I did it and it has started to work. Thank youuuu
how do I setup a cluster if I want to in the future?
is there a guide I can follow?
You need a shared folder, it'll be something you use in the cmdline if I remember right
theres a couple ways , you can run off the same .exe with differnt batch files for each .
or my prefered way is to just install a fresh server in differnt folder to the first install, then link them with a shared cluster folder
2nd is better. You can set different server settings with the 2nd option.
you can set differnt settings using the batch file method but it gets alot more complicated imo as they all have to be set in the start command
Ain't hard if you got BATman ;D
Btw how do I set the server rates?
ini file settings
you will need to edit the two .ini files the server uses , all commands can be found here ,
https://ark.wiki.gg/wiki/Server_configuration
or you can use a program like ark beacon omni , makes it easier , the paid version of the program is excellent , the free version does a fair bit stuff.
which ever way you will need to do a little resaerch an figure out how you want the server set
in which directory will the ini file be?
is it called DebugConsole.ini?
in the directory - F:\Server\Engine\Saved\Config
where ever you installed the server , then shootergame\saved\config\windowsserver
oh nice found it
the two files wud be gameusersetting.ini and game.ini
a fresh server install may not have game.ini in there an you have to make it .
oh right
anyone familiar with beacon for ark? what ini settings does creature adjustments change for a specific dino? for example it allows you to modify the dmg/resistance of a specific dino
right thanks
also, is there something to modify the creature size classes that aggro onto a specific tame? for example, making shasta not aggro small things like eels
or at least a mod for that
not that i know of sry
I'm setting up our dedicated server to move the maps from gportal to our server. All maps work fine with the saved ark files under ShooterGame/Saved but Fjordur is still showing Day 0 and the character has no inventory. Is there something special with the Fjordur Save Files? (never mind, it's fixed. I must have messed up something, when copying the files)
anyone know the setting to increase the ammount of linked storageboxes a tribe can use. default is only 4
For some reason my server since SE has a level cap of 95 on all new character created. Is this a server setting issue or a bug?
This is a long shot, did you find a way? I have that that expires in 20 days, and no way to remove it in the base LMAO
cheat DestroyMyTarget while looking it.
If anyone can help with the issue I'm running into I'ma crashing every time when I Open my inventory
Ingame issue that WC has to fix, not server setup help.
I thought to ask here first
#bobs-with-probs would have been better. This is for setup help. Not game bugs.
Ok
my players since aberration update are having problems with character sync, and after recreating their character, they cannot reach level 100 (only 95), has anyone had issues like this and figured out what's causing it?
Hi everyone I just want to hear need some help 🙂
Does anyone know where I can manage permissions on the servers as permission groups because right now there are permissions Default, Admins Does anyone know what kind of folder I can find this in ? 🙂
Good morning. I would like flying dinos to not be possible on my Aberration map as a base but I would like to activate the zeppelin.. How to do it?
@red shuttle #bobs-with-probs
Ok thanks
you can block all non abberant dinos , otherwise seems to be a problem as the old ase codes for blocking specific dinos dont seem work
There a command on ASA for explorer notes?
giveallexplorernotes?
I am playing single player on ASE. I have the fear evolved event enabled in steam launch commands as well as in the menu options before starting my single player world. I am able to see the holiday items in the cooking pot but they have no cost, and the actually event isn’t running, meaning no bones, headstones, dodorex etc. any help appreciated to get it running. Please ping me
ASE events works parcially, you need old files from wildcard to activate them fully
Are those acquirable
That’s a shame
You can find someone to make a mod that may works
Ok. I’ll check it out. Thanks for the reply. Have a nice day
Anyone have Fix for Cave Overspawning?
The overspawn in some our caves are starting to cause lag when players enter them?
I use the automatic dino wipe mod, but you can also use the spawn blocker mod to limit the total amount of wild megs, eels, etc in the server.
On nitrado if I wanna make a cluster do I need to pay for a another sever to do it on
Yes
Each map needs it's own server for a cluster.
Anyone know of a command to give another player explorer notes? We are replacing someone's character and we're trying to give them their notes back.
Trying to avoid giving them the admin password to do it on their own character
As far as I know, giveallexplorernotes is only for self. You may be able to teleport them to each note?
me and some friends just downloaded ark, but after playing and ready to go into a cave... we found theres 0 enemies in the cave? is there a fix for this?
I'd rather give the password than that alternative lol. Thanks for the reply 🙂
You can always just change the admin password, it would be 10x easier. Yw
Anyone know why forcejointribe doesn't work on the new store save system?
Yeah I think that's what we're going to go with. Change password, let him do his thing, restart the server after
You can use the ArkShop plugin and they can buy the command with points they gain passively
There may be some other mods that can do the same thing.
I would agree that's another route to the same goal but I don't believe I find that a more efficient alternative
Depends on how big your group is.
I for me it was more benefits to go that route due to having over 50 people on my cluster.
As far as I am aware, shop mods aren't available on cross-platform servers anymore since they're not allowed on consoles. I don't know if that goes for plug-ins as well
there are 2 shop mods that can be downloaded right now i used to have one butit got taken down and now its back up i dont dare to use it again since it might get taken down again
I think it's shop mods that use any form of premium currency
Based on this, I wouldn't either
Any mods that use any outside sources for currency
aaawww ok i seee ya its a weard thing anyway now does this include the ones that use time played on a server where the amount of time played gives u tokens that you can buy normal dinos like gigas and such instead of taming them
The shop mods I'm talking about use modded items, like add in coins that drops from dinos and what not
Unless that's a big no no as well?
Has anyone noticed no building in portal area and what's a ini command for allowing ?
It sounds fine, it's not outside currencies from a 3rd party site, it's modded items right?
As far as I know, you haven't been allowed to build in portal since Ab first released on ASE, and I don't know if a config exists for it.
Anyone using ASR and having issues?
All placed structures disappeared and can't learn any engrams from the mod
Have you tried uninstalling/re-installing the mod ? I use ASR and nothing on our cluster, your issue seems local 😉
not tried it in asa but shud be
game.ini
bIgnoreStructuresPreventionVolumes=True
I wasn't having any issues with ASR last I checked....but my servers have also been down because I don't have a working AMD driver right now for Aberration.
Only thing i know that it doesnt work is when a player didnt create a tribe.
Hello good. Does anyone know if the AMD drivers for Aberration have already been fixed?
not yet, keep an eye on #announcements and #patch-notes
anyone know the console command to list wild dino level without mods?
Not even seen any sign of the AMD fix in any of the unofficial driver leaks so far either.
is ther a way to get a better hit detraction on your server or the net code ?
i have a unoffical cluster hosted on a Lan server for myself and partner to play on. do i still need to port forward in order to transfer between maps? the map shows but i time out transfering
you can the join both maps with out an issue? if so how are they setup ? if running from two seperate installs, you will need a shared cluster folder
i have them set up with pterodactyl, i believe they share the same cluster folder
and yes, no issues joining the maps. just can't actually transfer between them
ah sry im no good with linux or using pterydactl.
the issue u describe is either something wrong in the transfer filters or the shared folder,
gus.ini
under [serversettings]
NoTributeDownloads=False
PreventDownloadDinos=False
PreventDownloadItems=False
PreventDownloadSurvivors=False
PreventUploadDinos=False
PreventUploadItems=False
PreventUploadSurvivors=False
to enable full transfers between the clustered servers
Are you use the server browser to join them or typing in ips
using console in singleplayer to join
Thought so, transfer uses same system as the server browsers so game is trying to connect to your wan IP and without a port forwarding it can't, I'm not sure if there is away to get the servers to report there connection ips as the lan one instead of public one
so i need to portforward then?
That or check the wiki to see if there is a setting to have it report lan IP as public one
ah that makes sense at it needs to connect to eos to confirm the player id(eos id)
thank you for the help 🙂
Not sure if setting -MULTIHOME=ip will work or not
i tried looking into multihome but couldn't find much information about it
Yeah and there's even less info for the -ServerIP one that people found in Nitrados Setups
yeah, causes one massive headache. lol
atm my server isn't even starting cause i tried to restore a back up
Would it be possible to run admincheat as player from server console?
For example:
Player x wants giveallexplorernotes
Admin does some magic in console, runas "playerx"-giveallexplorernotes
Got a custom cluster path set too? Just adding it in
Just in case anyone is curious, if you want to disable the pyromane go to your game.ini file for your server and type
NPCReplacements=(FromClassName="FireLion_Character_BP_C",ToClassName="Achatina_Character_BP_C")
XD
why not save some typing an use,
NPCReplacements=(FromClassName="FireLion_Character_BP_C",ToClassName="")
or better yet , change them to mega's , always a shortage of those when u want them
well i figured most normal people would have copy pasted, but yeah
NPCReplacements=(FromClassName="FireLion_Character_BP_C",ToClassName="Megalosaurus_Character_BP_Aberrant_C")
for megalosaurus
my point was you changed it to a non abberant dino, this cud lead to issues, as the server is then trying to spawn something that some/ prob most people have blocked
achitina spawns on abberation?
ohhh wait i didnt do the abberant version didnt i
asa servers are finicky enough, it prob be fine, they generally ignore something they cant do, but its an extra variable that may be issue
ah so it would be Megalosaurus_Character_BP_Aberrant_C
Any way to make npc body timer lower? Wild Dino bodies last 4 hours on my server. Too long
GlobalCorpseDecompositionTimeMultiplier=1
is default , lower value makes them go away fatser, dont use 0 though as it will go back to default
I set it to 10 and it didn’t change. I’ll try lowering
10 is why there so high
That setting isn’t in the config and it’s 4 hours, I set it to 10 and it didn’t change so figured it didn’t work
1 is default, 10 make sthem last longer
goes in game.ini
Oh I added to Gus mb
all server settings can be found here,
https://ark.wiki.gg/wiki/Server_configuration
Thanks
can i refund/replace someones entire bag contents with a server command
Didn’t change the timer :/ I set it to 0.02083 (5 minutes)
ark be ark, it only effects new things in the world, any existing timer has to run down
ive never seen 4hr decay timers so idk what you did to cause that , first thing is to check through the ini files an see if you have duplicate lines i guess
also make sure there under correct headers
oh also any mods that cud mess with it
Is it a corpse bag or just a dropped bag? They have different ini settings.
not the bags the dino corpse itself from what i can understand
Ah. I think thats the same as a dropped bag timer tbh.
I could be wrong tho, i cant remember the last time I changed those.
I think its corpse decay or spoil timer? They are 2 different settings or were on ase
GlobalCorpseDecompositionTimeMultiplier
You have to lower it for lower times
My server is not appearing in the server list. The server says it is started. The information for server name, players online, etc never populates underneath the IP information.
Troubleshooting:
- I have restarted multiple times.
- I have stopped and left it stopped for 30 minutes, then started it back up.
- I've FTP'd in and checked and cleared .bak files. No files over 50kb observed, so corrupted ones did not seem present. Cleared some anyway, no change.
- Stopped, cleared mods list, saved, input mods list, saved, restarted - no change.
- Attempted restart from 4 previous saved backups - no change.
Not sure what else to try...
I tried submitting a ticket to Nitrado and I'm getting error to even do that 😑
This isn’t working for me. I do have increased player body times for the bags, it’s set to 24 hours but nothing for corpse decay. It’s currently 4 hours In game. With no ini settings.
I don't know then, that's the only setting I know of, and W1ll already mentioned it as I've just scrolled up to look.
is there a config to disable cryosickness on a pvp server
no, u wud have to use modded cryos
does anybody know how to use the "Cost Multiplier Override" when spawning item blueprints with rcon?
I can't find any supporting info about what value has what affect
for example, if i use 5, would it be 5x standard cost, or would it only cost 5 of a resource
im not familair with pvp servers but looking through the wiki, there is this option , no idea if works in asa though
CryopodNerfDuration=x
wiki says x is 10 on official , i wonder if u set i to 0.01 , the dinos wud get sickness but recover almost instantly
has anyone been and done alpha rockwell and got the new bobs tales notes and been able to go past level 155 ?
Unfortunately doesn’t look like it works on asa.
did you try it ? the wiki isnt always upadted with what does and dont work
i did
it specifically states on beacon cryosickness cant be turned of on pvp
ok .... other than modded cryo , i dont think possible then.
most modded cryo you can make cost an work the same as official though
okay thanks for the help
multiple people in other channels and discords have stated that its bugged an cant go past 155 atm, i guess another thing for wc to fix
aww i figured much i just see people on official saying they hosting alpha rockwell and i was thinking it was still bugged for both parties
when i mind wipe it says 174 but stops at 155
ya i got mine in the ini set for 300 player level when they finally unlock the cap it will auto give the points 🙂
Does anyone know of a mod that removes the need for structural support? Not looking for new parts just the need to not plop down supports every 3 tiles
theres one called foundation ceilings or summit like that , but it does give the seperate ceiling tile piece that needs be used, dont know of any others
Thanks!
Hi! Trying to set up a server on arch linux. I got the server running without mods, but the second I install any mods I crash with a signal 11 error.
[sample@pooter ark]$ ./start.sh
Shutdown handler: initalize.
Using binned.
4.5.1-0+UE4 7038 3077 404 10
09/18 18:57:28 minidumps folder is set to /tmp/dumps
Setting breakpad minidump AppID = 346110
LowLevelFatalError [File:F:\build\LostIsland\Engine\Source\Runtime\Core\Private\Linux\LinuxPlatformProcess.cpp] [Line: 696]
FLinuxPlatformProcess::WaitForProc: waitid for pid -1 failed (errno=22, Invalid argument)
Signal 11 caught.
EngineCrashHandler: Signal=11
./start.sh: line 1: 13352 Segmentation fault (core dumped)
The only mod I have active is super structures, I've read online that this error could be due to invalid mod files. I seem to be missing the modid.mod files for all of the mods, as I only copied them from my steam library (on the same arch machine). Is there any way to download these .mod files without installing the entire game on a windows vm, downloading the mods, then moving them back to my local machine?
im using -automanagedmods, this is my ShooterGame/Saved/Config/LinuxServer/GameUserSettings.ini
[ServerSettings]
ActiveMods=1999447172
[ModInstaller]
ModIDS=1999447172
oh well running the game in singleplayer generated the .mod files but its still crashing with the same error
if i buy the forglar map and host it on a private server for me and my friends do they also have to buy the map
yes
😢 thanks
This channel is for discussion about unofficial (or single player) server setup including mods and other relevant topics
#customer-support but it may be closed. @dusky shell
if its just invisible probably just relog tho
Ok, thanks and sorry
Can anyone help me with mu settings on nitrado for ark survival evolved
Hey guys had the pelayori cryo mod uninstall itself on three of my servers any ideas what I should do all cryo are gone
re install the mod , then load a backup to a point in time before the mod got uninstalled
That’s what I was thinking but wanted a second opinion thx bro
Gcm isn't working for me.
I put password in, enable creative.
I can fly, but there's no admin gun, can't make anything, pick berries or anything. Nothing shows up in inventory.
Hello, i´m trying to create my own server for ASE, but i have a problem with the ports, only the rcon it´s open, the query port and game port don´t open, do you know why? please help ^^
Hi, can someone help me? I created an ARK ASA server on a Windows server, and now I want to play with mods.
What I have already done: I added the mod ID in the GameUserSettings, but my server still shows that it doesn't have any mods.
you need to add the mods via commandline/ start batch file with
-mods=<modid>,<modid>
ie -mods=12345,54321,45667
the mod ids can be found on cursefore website(project ids)
you will need to forward what ever ports u set the server to use, in the firewall and router udp
thats what i already did but its still schow that my server dont have andy mods i creaed a Mod Folder and i puttetd the mods in the mods folder but that dont help .-.
Mods=929420,932770,949521
ie-mods=929420,932770,949521
ActiveMapMod=0
ActiveTotalConversion=929420,932770,949521
post the text from your batch file here an i'll take a look at it, put =xxxxxx for any infor you dont wanna share
Can I send you the GameUserSettings file, and can you have a look to see if everything is fine?
no wont help becuase mods are added from batch file /commandline
the gus.ini does nothing for installing mods in asa really
i dont have the gus.ini file in my Server lol
oh sry its short hand for gameusersetting.ini
but it dont matter thats ireelevant to me, id need to see the text from batch file or the command line ,
i.e
Start ArkAscendedServer.exe TheIsland_WP?SessionName="my server name" -port=7778 -winlivemaxplayers=10
yes, but the thing that's confusing me is that I’m using a Windows server, and I can only see the server through FTP/FileZilla
well how do you start the server? how did you install it ?
i start and restart the server with a discord bot what a frend made
the friend installed the server for you per chance?
yea and then he send me the fileZilla data and said i dont know how this shit works you cann make it
then you need to contact friend and ask how he did it an if he can add the mods
Okay, I’ll ask him later, he's currently offline, but thanks in advance.
I have it done, but only the rcon port opens
I have a wide range of ports open on windows firewall and on the router, but the only one that opens when I check and the server is open is the rcon
so i can´t connect to my server, because not appear on list
and with the ip:port on steam nothing, the server no exist 😦
you can use a website called ip void udp port scanner, put in your ip adress and the port number that you want to test , this will help to find out if the port is actually open properly .
what ports are you using?
also can post the txt from the batch file your using here if you did it manually , put =xxxx for passwords if you dont want to share those , thx
Hey guys so I hosted ase for 5 years , im not new to maps, coding or beacon.... however once I added my AB map no one can use the Teleporters...I have to set to auto unlock for all at Lv25 for ease of map travel same as the other maps on my cluster- however on an the AB map they can be made, laid just not used any ideas?
Anyone with this problem? I got the notes from Bob Tall Tales in Aberration, the implant says it released 5 more levels to level up but it didn't release them in the character
theres a cryo sickness protection mod that works great if you wanna stick to vanilla cryos and it can turned on/off with a default state set by the server
Hey guys, I setted up my server and played for like a hour or two…
In the evening I wanted to play again, but now i can’t start it. It says:
“Failed to open descriptor file ../../../ShooterGame/ShooterGame.uproject.
Can anyone help me please?
My sister has her own server, but when she made her character, she forgot to change her name.
Does anyone know how to fix her name, without having her make a whole new character? (Nitrado on Ascended)
RenamePlayerId <PlayerID> <NewName>
RenamePlayer <"PlayerName"> <NewName>
Is there a bug with any mods or anything that causes armor with higher stats to make you take more damage, rather than less?
I have some Yi Lings with different saddles, and the ones with Ascendant saddles seem to be taking far far more damage than the ones with regular saddles. I don't understand why.
If its modded, its possible. Were they created with a standard bp or were they spawned in or were they crafted with the new blueprint tinker table from Bobs Tall Tails?
So I've got a weird issue happening with my servers. When I launch Aberration and The Center aberration doesn't completely launch and closes while the center is fine. At first I thought it was due to a mod loading in first since originally they would both display BattleEye succesfully started>APDeathRecovery>Pelayori's Cryo Storage and on the Aberration launch Pelayori would be wrote first and then DeathRecovery before it crashed. Deleting the mods for a fresh install did not fix it so I removed DeathRecovery from the command line on both and tried launching again to the same effect. Changing the WP to older versions and the uncorrupted.bak still ended with the map not launching and switching the AltSaveDirectory to another location to effectively start the aberration map a new did not work either. Any idea to troubleshoot and get it to work will be appreciated.
look through the crash logs of the broken server see if anything stands out?
remove all mods an save data see if it ok then ?
start with a clean fresh server , then add things till you figure out the issue?
its just a matter of doing logical steps to narrow down the issue , other wise youre just pissing into the wind and hoping u dont get wet feet
Something got corrupted along the way either tribe data, profiles, or map nothing worked until I used the back up of everything and deleted the rest. Thank you darn thing had been broken all day.
Anyone notice a difference in ab ping with update?
Does anyone have the command to unlock the tek bed?
Ini setting to allow more then 100 turrets?
They were upgraded through the Upgrade Station mod made by Ghazlawl on Curseforge
Crafted with resources from engram, then upgraded through the upgrade station
Yeah id be in the modders discord asking questions then.
I'm not sure if they have one, or where to find it, since I didn't see one listed on the mod page.
And the mod also doesn't have comments enabled, so I can't check that either.
Im gonna be honest, if I see a mod with no possible way to contact the modder, I dont add the mod.
You are stuck and theres no way to even find out if the modder knows there is a bug, much less if a fix is on the way.
Its a fat nope for that mod for me.
I found their Twitter, and they're pretty active, but I couldn't DM them so I had to tag them in a post. The mod was last updated in December of 2023, so that may have been a red flag already, but I'm not the one who added the mod.
The mod has over 2 million downloads though.
Though that mod was also part of ARKpocalypse on August 16th
I use the Imbue & Upgrade station by HexenLord
does the same thing, but he's got an active discord with support for his mods
Does anyone else's stuff randomly roll back on server restarts? I have my inventory from the afternoon yesterday but everything else in the world is still the same as it was 10 minutes ago before the restart
And now I can see myself sleeping on the ground but I'm clearly playing
And i appeared at 50 50
thats normal if you dont do a server save before you do restart. the save intervals are 10-15min by default so you need to initiate a save
Ah ok. Thank you so much!
Does anyone know why when I enter an unofficial server the entire server crashes?
Also when I enter I get the character creator when I already had a character on that server
Anyone use the ASR mod and having issues? Can
Can't learn any engrams, and all placed have vanished
across multiple clustered maps on one server
This sounds like a bad mod install. Is the mod the most updated version?
Has anyone having issues of joining a server and instant kick you out or you load in and then you just glitched not being able to move and then kick you out again?
hello guys, does anybody know if there is a way to change the limit of the linked storage boxes?
Has anyone built a cluster using Unraid for ASA? I can get them all running and they can see eachother but cannot move the survivor even with the settings enabled to allow it
is there an ini to increase enemy build radius? want to force players to not build so close to each other.
enemy build radius as a default is way to low and there should be a setting that allows owners to modify the distance
is there any mod or ini config that can fix problem with wyverns on scorched? they still keep despawning and there is only like 4-5 wyverns per whole trench at a time
ru hosting ur server ? and using beacon ?
yes and yes
cool
in beacon - go to creature spawns
i cant put pics here
basically go to creature spawns
new point
wyverns click replace spawns and click load default spawn .. copy and past the they wyverns that are already in the drop box this will iomprove the spawn rates of wyverns for you
can i dm you and send screenshot?
yh yh
@wise kindle I thought so too but tried uninstall reinstall on both client and server side with no changes. Just to be sure I did a full reinstall of all mods on server side too
Could anyone suggest a good RCON client for multiple Self-hosted ASA servers? preferably free
Hello
What is the code to put the autoengrams in the configuration? And where do I have to put it gameusesetting.ini or in game.ini? Thank you
game.ini
[/script/shootergame.shootergamemode]
bAutoUnlockAllEngrams=true
just be aware that this code will make tek auto unlock at lvl 100
Thanks bro
Does anyone know if there's a way to reset explorer notes? I got absolutely screwed from glitches in the tek cave several times and used the command to give explorer notes along with the ascension and everything else this time around. But when we went to our unofficial scorched earth server, it automatically collected all the notes. Our tribe is only a few people, all in the same boat with the notes. Any way to reset them individually or for the entire server?
Anyone know how I could fix my server being stuck on booting? I haven't been running ARK through the SteamCMD but I wanted to add mods but the launch command isn't long enough so I setup SteamCMD and now whenever I try to join, it says lost connection and it's stuck on booting. It still says it's setup and the mods are active, I just can't join.
ark evolved or ascended?
im not sure exactly what you mean by its stuck on booting?? what does it say in the server console window that comes up ?
also did you forward the port/ ports needed to make the server joinable?
Ascended. I'll send a screenshot in DMs of the server console window, and it's a LAN server, so I don't want the ports forwarded.
You more then likely will never be able to join it from the in-game server browser if ports are not forwarded
I'm not connecting from the in-game server browser. I'm just using open 127.0.0.1:7777 cause, well, it's LAN.
try a differnt port , some people have issues using 7777
That IP only works if it's on same computer your playing on
Yes, it is
It just needed more time. Apparently, "full startup" does not mean the server is fully started up. Thanks Wildcard.
pretty sure they say waiting for incoming connection , last i looked, thats a newish thing last few weeks
Yeah, how fun!
Whateva, atleast the server's up, and I don't need to port forward it!
if u ever want anyone else join u will need to, its easy enough to do though on most setups]
My wife lives with me, no point in port forwarding it
Or if you want to make a cluster and transfer between servers through the terminals
dint know it was needed for that tbh , but seem rem someone else saying they had to forward to do it
You just click on the server to transfer to, so it's pretty much the same as using the server browser to join one, it's going to connect to the IP it gets from eos and that's normally external IP (same one battle matrices shows)
my networking knowledge is abysmall, i an i have no inclation to spend the time learning about it tbh. it just doesnt interest me so i get bored an forget half of what i tried to learn
My server rolled back to .27 and now has no ping tried restarting and Nothing
Anyone know a fix
For ping I don't know but for server version it should of rolled back to .27 they pulled .28
Anyone know what would cause whistle commands to not work like whistle aggressive or passive
Different dino groups, use the numpad to get to 0 and try again
Ok thx will try that
Does anyone know of a mod to make the ichthyornis less ridiculous when you have a stacking mod? Tired of losing literally hundreds of resources because a trash bird was in the area. There used to be a mod for ASE called "Low Steal Ichthy" that capped the amount of resources they could take instead of just coding them to take a whole stack, irrespective of stack sizes. But it's not available on curseforge as far as I can tell.
just remove them. remove them hell birds
#1 stack mods are bad
#2 dont know of one
#3 code the evil buggers out
😭 I think that's where I'm at right now. I don't like just removing them, but until there's another solution, they make being anywhere near the beaches un-fun and feel really unfair because they're not working as designed and it's unrealistic for them to take a whole stack of meat and poof it instantly, or narcotics (haven't had that happen to me on this server yet, but it's a matter of time)
Gonna just tame a couple for the purpose of getting otters and then nuke them I guess
change to hesporanis an enjoy the game 🙂
oh good idea, I was wondering what I'd replace them with but that's perfect
I usually just replace them with nothing. but more poly is good 
oh I was using a spawn blocker but making more hesperonis sounds great. now what to replace the pegos with
i leave the pegos, cant have it too easy haha, but id prob change them to the lil monkeys coz who doesnt love them
I lost a a tame in a cryo to a pego, but more monkeys sound fun
First time taming a pyromane almost had it tamed than just exploded what did i do wrong any tips?
Try to fight low level dinos, spam the heal
Which keybind is it to heal
there is mod for asa that called Stop The Steal
Does the Dino-Hunger Multiplier affect wild dinos? Like as in taming? Like I want to passively feed a Basilosaurus, does it make it take longer? Or is it only for tamed dinos?
anyone know how to stop the dupe when transfering servers?
So far, there is no fix for this that I've seen, for officials or unofficials. You can enable the dupe check settings in your server, but I do not think it stops the transfer bugs.
Does tribe managment settings affect uploading dinos at the obelisk? I cant upload dinos. Its an unofficial server but other plays in other tribes have had no problems
Anyone running the ASR mod? been having issues the last week, can't learn any engrams, placed structures vanished, etc. Tried uninstall and reinstall both client and server side. everything is updated to latest version, even tried dumping all mods off server and full reinstall of them
anyonw know if there is a command to fully asened a tribe or another player
fully what?
Ascend
its by person not tribe.
Like... as in beat the bosses Ascend?
then how would i do another player
oh another person
not sure if you can
I am trying to do the dino level ad stats I check the wiki and copy and paste the thing in the right spot but it's just not doing anything
Is there a setting for removing that "recently injured" timer off of tames when you try to cryo them?
Show us what you copied
PerLevelStatsMultiplier_DinoTamed_Add[0]=1.0
One sec
Should look like PerLevelStatsMultiplier_DinoTamed[9]=3
That’s pulled direct from my gameini
Okay I will try that and if it doesn't work I will show you what my game. In I looks like
It will work
Ok
Health 0 1.0
Stamina 1 1.0
Torpidity 2 1.0
Oxygen 3 1.0
Food 4 1.0
Water 5 1.0
Temperature 6 0.0 (Unused stat)
Weight 7 1.0
MeleeDamageMultiplier 8 0.0 (Base Stat cannot be increased)
SpeedMultiplier 9 0.0 (Base Stat cannot be increased)
TemperatureFortitude 10 0.0 (Base Stat cannot be increased)
CraftingSpeedMultiplier 11 0.0 (Base Stat cannot be increased)
On Nitrado's settings, there's a setting that says web and recharge, how would one go about adjusting that? would higher be better? or lower numbers? it's not exactly clear by the description
To be fair I have not even seen that setting, what’s it do ?
That's what we want to know, for cosmo xd
its a max setting, it defaults to unlimited I believe.
“MaxCosmoWeaponAmmo” and “CosmoWeaponAmmoReloadAmount” in the GameUserSettings.ini under [ServerSettings]
Oh, gotcha, cause it showed as a negative value, I was concerned I had goofed when using beacon.
guess reload amount may change speed
not sure.
Oh for the new spider lol that makes sense now 😳
Set to 3 and see what happens 🤣🤣
Let us know
out of curiosity, is there a mod that can turn cosmo into a light pet? if anyone knows. Feels a bit weird that they're not a light pet
That would be a great idea
cant stack wyvern milk now on ASA?
Yeh you should
ConfigOverrideItemMaxQuantity=(ItemClassString="PrimalItemConsumable_WyvernMilk.PrimalItemConsumable_WyvernMilk",Quantity=(MaxItemQuantity=1000,bIgnoreMultiplier=true))
How to activate Zeppelin in my server ? ... 😢
I haven't done anything with Bob's tall tales yet, have been holding off on buying it... does it require the server to have it installed as like a mod? or is it built into it and is active for anyone who owns the DLC?
In game
thanks
do you have flyers turned off? pretty sure it counts as a flyer
Aberration Vanilla and other vanilla again
sry dont understand
I haven't touched anything in the setting.
ah gotcha, it shud work then , whats its issue?
The zepellin can be crafted but once you want to use it it simply disappears
thats odd, a quick google search says its a bug, happening sometimes if the language is not english, could this be the case for you?
Indeed we are a French server. Console players can't put it in English...
oh ermm, i guess file it in #bug-reports , hopefully the major patch thats due fixes it though :/
😢 Thx for ur time
Can I change an unofficial I have bought from one map to another?
Also is there any chill unofficial server for a small tribe?
You’ll find one plenty around #1110925695900713072
Anyone knows about this?
To be fair I have never tried this so it may work or not, if you just upload and swap maps, you’re not really deleting any files so it could work. It would be a much better question to ask your server provider
For the ase ark shop plug in, are there guides anywhere on how to set up the kits? Or templates already created?
dms brother
You would have to go to there discord I’d say for guides
If nitrado, yes.
There arent any unoffical servers showing up for me at a time
is there any way to disable the spawns of nameless on my server?
Im hosting a non dedicated session but my friend can’t join me, what do I do?
tx
already did that earlier but couldnt find anything
Anyone else got the problem of Nitrado server crashing after 1/2 minutes of joining it ?
I have these lines added to my game ini files on my gportal server and i cant get them to work. any ideads
ConfigOverrideItemMaxQuantity=(ItemClassString="PrimalItemConsumable_RawMeat_Fish_C",Quantity=(MaxItemQuantity=100,bIgnoreMultiplier=True))
Has anyone also the prob that their server is in a crash and restart loop since the 52.22 Rollback?
Hey guys what pc would I need to run a server?
Preferably on Amazon
I know I need 32 gigs
52.22 is a client version , no effect on server version
it depends on what you want to do , each map will vary on ram useage , general rule is 8-12gb per asa server instance (map) for upto 10 player an light mods
Yeah I only want a server with 5 of my friends no mods and at max 2-3 maps
id be looking at something with 64gb of ram then really , preferably a platform that supports ddr4 as thats cheaper, id prob go with some sort amd cpu with intergrated graphics
I just need some help with this because I looked on Reddit and there was a ton of arguments over what to get
64 gb ddr4 got it
yea everyone will a prefernce, some just use what they had laying around etc
doesnt really matter , just go by cost, server doesnt use a gpu , it only use ram and cpu.
you need some sort display output to make it easier, hence i was thinking some sort amd cpu with intergrated graphics, intel will have equivelants too
So can I get a example of some sorts
Btw I appreciate your help this process
I read your guide and did my research
id imaging some thing like a AMD Ryzen 5 4600G wud be fine for what ure after, might even get away with 32gb ram for 3 maps but i think u be cutting it a bit to close
if you plan to build the sytem ure self, might be worth digging around local market places, facebook, or ebay an seeing whats out there s/h
hell some people are running servers off old broken screen laptops an just plugging into the display port a screen when they need lolz
my friends and i went in on buying a blade server with 72 cores, 512gb ram and 14tb of drive space, we split it up into a couple different uses, but its primarily used for ark servers and a media server (different VMs), currently running all 4 available maps and its sitting at 12% ram usage and 8% CPU usage
a little over $1k, bought from amazon, we split the cost 6 ways
Do you have the exact one?
was refurbished and a couple years old, but it works great
not off-hand (i'm not home right now)
I was looking for something exactly like that
Well when you do get home please let me know
will do
I think you can build something capable for about half that.
Ryzen 5 5600G, 64/128GB DDR4 RAM, basic motherboard (A520 would do or B550 if you’re feeling rich), 1TB NVME PCI-3 storage, case and PSU.
I will look into it
thats pretty much the route id go tbh , even if you brought all the parts new , in the uk right now, Total: £408.84 inc vat an shipping for 64gb ram ,
£508 for 128gb ram
oh i guess u might need an extra £10 for a windows pro license key
id also throw in a small 2.5" ssd for backups , just to have two backup copies on differnt drives
Or an external USB spinning drive. Either way, I don’t think you’ll need $1K
oh i used uk prices, usa prices are way cheaper
pretty sure u wont want a server unit sitting in your living room either haha, be ok if u had sound proofed garage or basement i guess
Mine sits under my desk. I have a BeQuiet 500 case and the CPU uses a cheap 240mm AIO water cooler mounted in the roof. It’s quiet.
Not going to need a big PSU either. Probably 300W would do all that with headroom to spare. Just don’t go cheap on it. If you can’t find reviews on mainstream hardware sites, don’t buy it.
i cud of cut that price down alot using cheap janky parts , prob shud said that, it was based on parts i thought were decent enough
You want it to be reliable though. Cheap and reliable don’t go together.
psu is deffo not the place to cheap out on
Is there a way to set a maximum number of teslas that can be placed, other than turrets?
you only do it once. When you're buying everything for the second time you realise your mistake 😂
i used repair flat screen tvs before they went to led, as a hobby , most common failure, cheap arse capacitors on the psu blowing
i did a lil research before buying the psu in my current pc 🙂
anyone got any solutions? i have placed other ppls inis from there server into mine and still no luck
do you use a stack mod?
no
is for asa or ase?
i have base stacks at 2x and a few custom lines for mutton/prime/honey ect. ASA
Nitrado server
make sure its unde rthe correct header , cant just shove at the bottom of the ini
stop server, wait 5 mins, go in game ini add the lines under the
[/script/shootergame.shootergamemode] header
save it, wait a minute
restart server, shud sort it out
ok ill check
asa has a tempoverrideheader that they use to make death bag green beams show up
Ah it was under that header. Moving and trying now thanks stay posted
it'll work in the correct place, ive seen dozens peple make the same mistake
the only two things that didnt stack via ini last i checked was rhynio pheromones an wyvern milk
Thank you so much this was definitely the issue! i knew it had to be something simple
took a look at your idea, what do you use the rest for?
i've got proxmox installed and have it separated into Game Server (Ark, Conan, etc), Webserver, media Server, source control for 3d models for printing, etc and pi-hole to run a network wide ad-blocker and manage my network
DMed you the link to the one I ordered
Anyone have a good mobile app recommendation for rcon on ASA servers? Don't mind a paid one along as it works well.
yes i do did you find any solution?
Source RCON failed to read packet length. Server failing to start. Any ideas?
Could anyone msg me and potentially give me a hand with my ark server recourse growth rate? Im looking at increasing it. I dont know what setting it is
gameusersetting.ini
under the header [serversettings]
ResourcesRespawnPeriodMultiplier=1
thats default value, lower value make them spawn back quicker, dont go below like 0.01 or it will likely default back to 1
all server settings can be found here, https://ark.wiki.gg/wiki/Server_configuration
anyone has any suggestions for ASA Server Manager (Windows)?
i use haru host
Some of my nitrado servers went down today during the steam crashes issue and I'm still not able to bring them back up...
Anyone else having this problem?
there is a way to show death beams in asa?
yes , if you mean the green light that shines from above
Yeah. Can you tell me how to enable it for server please or its a client side option?
Thanks i will try it!
Can i also get a link please? Planning on upgrading our server rig
sry just edited it , i had a thingy on end shudnt been there
I am trying to make it so dinosaurs of lower level can't really spawn on my server how do I do that and how do I change the max level cuz everything literally everything is level 10 and under right now
Look up windows game server manager. WGSM has a addon for just about any game you can think of.
Anyone having inventory issues? have to log out because you cant access shit or accessing it and then getting kicked
Is there a way to increase the structure limit on the Zeppelin? It looks like the setting to change it is separate from platform saddles and rafts.
Hello everyone, after the restart, does the timer start again for the destruction of buildings? Is there a way to solve this?
turn off autodestroy tbh, I have autodestroy off + a 3.5x decay timer on my private cluster, haven't had any issues with timers.
Is there a cross ark chat plugin for asa? (for servers in a cluster)
Sounds like spam, lots of it.
theres LACC: Lily and Azure's Cluster Chat i have never used it
so I put the following commands serverplatform and publicipforepic on my dedicated server, will my friends on playstation be able to join even tho I play on pc? Im using my laptop to host the server and playing the game on my desktop
and if it does work can someone help me by joining it, I dont wanna get them the game and not have it work, pls pls pls Ive been asking around for about an hr for someone to join it would help a lot
the server is for ark evolved or ark ascended?
im using Discord Chat ServerAPI Plugin on my cluster
enable both pve and pvp decay on your servers. that solved issue with decay timers for me
This one works well
ark ascended
then there crossplay by default, the publicipforepic is an old ase commad for epic game version of ase.
you running the server via stm cmd with a batch file?
Yes, I followed this video exactly
ARK: Survival Ascended Dedicated Server
Setup | Host a FREE private server | Full Guide by troublechute
alot of the videos are old, outdated or jus plain wrong tbh ,
heres an example of a working asa batch file
Start ArkAscendedServer.exe TheIsland_WP?SessionName="my server name" -port=7778 -winlivemaxplayers=10
if put in the same place as the.exe it will launch the server, call it my server name, use port 7778 udp for connection and limit it to 10 players
by default there cross platform
Oh alright great thank you very much I really appreciate this! 😄
ok watching this video i get to 6 mins and theres mutiple mistakes in it lolz, i'll dm you a txt guide
@pure haven Can you suggest a specific parameter please, I will be grateful?
DisableStructureDecayPvE=False
DisableDinoDecayPvE=False
PvPDinoDecay=True
PvPStructureDecay=True
PvPDinoDecayPeriodMultiplier=1
PvPStructureDecayPeriodMultiplier=1
PvEDinoDecayPeriodMultiplier=1
PvEStructureDecayPeriodMultiplier=1
all this goes to GUS.ini
@pure haven Thank you very much
@pure haven For some reason, when I start the server, these parameters are returned to their original settings, can you please tell me what’s wrong?
best element/tribute item server transfer mod out there?
Did you apply those settings when server was still running? You need to close down server and then add those. Also you self hosting or nitrado?
@pure haven I turned off the server, applied the settings, turned on the server, the settings were rolled back. Server on a private machine
Thats weird. Im not sure what might cause it then
Hey just popping in to double check something before I do it.
If I reinstall a server, after the install I can go to "restore backup" and choose a recent backup, yes? Restore backups doesn't get wiped on a reinstall?
Follow-up question, are those the backups I have to choose from or can I force it to save a new one before I start?
Hey can pls somebody help me with my ini?
check you dont have anything in commandline that cud override them
you will likely lose all backups reinstalling a nitrado server.
you wud want to ftp connect to it an manually take backups before doing that
Cool thank you, I'm ftp-ing in right now to look for the backups
just take a copy of the entire saved folder, then a copy of the two ini files
Oh that's easy enough
@distant hearth @pure haven Thank you very much for your great help, everything turned out and works, I didn’t use the config, my bad server manager
When you go to restore, do you just replace the entire saved folder as well? The nitrado tutorial video is for evolved and seems to be different from what I'm looking at right now in ftp
Is that a yes? Sorry I'm terrified of wiping my server by accident 😅
yes sry, once you have those saved files on your own computer , then they can be installed to any other server at any point an restore the same place its at now
Perfect thanks, I appreciate the assurance 😂
isn't the config folder in the saved folder?
or do you mean the world save folder lol. like per map
probably, i cudnt be arsed to look tbh
for most people i find it easir that they just copy the whole saved folder, i always used have the pull files i wanted, slow internet lol
its better to save the entire Saved folder anyway. lots of stuff like the cloud, config, mod settings folder(at least in ASA some mods have their own folder), etc. not just the save file 
in ASE, there were also multiple folders for all the maps but seems ASA has them all in one.
Mods can you please tell me if you guys have seen reports from server owners about render problems? Like in my server, everytime someone leaves their base and come back the base takes a shit ton of time to render, this has been happening on aberration only. Is this a known issue?
Sometimes they dont even render
Only by reloging
haven't seen that. I haven't been watching discord today tho. probably just server issues 🤷 desync can cause that.
Hey guys. Can somebody pls give ma a nice Game.ini and GameUserSettings.ini that would be super nice 🙂
Does anyone know any smaller mods that contain the Desmos creature for download on dedis?
Look for "ASA Manager" it is free dedicated server manager. It will generate those files for you.
the default ones are nice and clean 🤣
Nah man
Anyone know of any decent rcon mobile apps?
hey guys can we still only rent servers from nitrado?
Yes
Cool thank you
Sorry I was busy and yea for sure man, I won’t be home till 10pm tho cause of work tho
What do I need to make breeding cool down like 1-2 minutes ?
Hello I am a co-owner of an unofficial PVE cluster and we have been trying to to figure out how to spawn in the easy craft blueprints (BP that only take one material to craft). It is our understanding that it is either a setting that we can use or it’s a line of code that we need to put into our servers. Any help or understanding on this would be greatly appreciated
does anyone know if this is in game days or rl days? ChatLogMaxAgeInDays
Do new patch to fix joining to server pls. i have no way to join because of last patch
I have a player that cant join the server. they try to spawn and it boots them to the mai menu. Anyone know if its possible to force them into upload?
I have the same problem. It started to happen after v52.36. The developers broke something and only some have such difficulties. I updated everything that was possible, checked everything. It is impossible to join anywhere. I am waiting for a new update to fix this problem
whats the command to teleport someone to me on a server
theyre stuck and i cant seem to get any command to work
Cheat TeleportPlayerIDToMe <ID>
with or without the <
Or if that doesn't work,
Cheat TeleportPlayerNameToMe <Name>
Without
It's just used to let you know what goes where
its not working :/
Using the correct ID?
If you're on Ascended, it uses the eosID
how do i get the eos ID
If you type showmyadminmanager
It should pull up the players connected, the ID will be next to their name
Cheat TeleportPlayerIDToMe 698151799
did not work
im so confused why its not working
i can teleport to them but cant teleport them to me wtf
@olive talon any ideas?
Well if the tp commands aren't working, you could give them the admin password for them to fly/ghost out, and then just change the password
It's annoying but it's if you cannot tp them out then that's probably the next best thing
that doesn't look like an EOS id to me, they're much longer on my server
Hello folks. Do you guys know if the summer bash has been added to the game yet. I would like to remove it if it will save.
having transfer issues and server not showing up in terminals or transmitters
cheat teleportplayernametome
then the name (ign)
having transfer issues and server not showing up in terminals or transmitters any help would be great
Question
yes its in base game now
if you cant see the server from terminal its an issue with the cluster id not matching
i figured it out
not the ID its the payers in game name
cheat teleportplayernametome ign
Tried both player id and player name teleport commands and they don't work
Idk why
Hey, is there a setting to activate building in the Portal Region and Red Zone (PVE)?
Oooh good question
game.ini
bIgnoreStructuresPreventionVolumes=true
how would we change the path designations of the gameusersettings/game ini files? can there be a specified path for each server?
Anyone else that runs plugins/mods noticed bases taking ages to render while you log in?
I'm currently learning to build my own ARK Api plugins with C++. Is it possible to speed up the dedicated server by stripping down some settings? My problem is, that I often crash the server with my code fiddling and it takes 5-10 minutes to get it up again, so that I can try another code.
Hello 👋 Sorry to ask a googlable question but how do I get all structures to be locked on pve server. Thankyou, have fun.
ForceAllStructureLocking=true
nitrado server? my self host will boot in under 2 minutes most time
no, we have a dedicated virtual Windows machine.
i dont think it shud be taking then long then tbh, unless its got loads mods an lot structures all over the map
Anyway, I would like to find out if there are settings, apart from removing all mods, that could speed it up. Is there a startup setting for starting it with low memory or limited graphic power?
none of those work for asa servers as far as im aware
oh, not asa, it's ase
oh i see, yea thers asome i believe, take a look here,
https://ark.wiki.gg/wiki/Server_configuration#Command_line_options
Dedicated servers don't use GPU
You are in here all the time, you deserve a helper role or mod 😂
oh no , that dont sound good, if i have bit free time i try help out, alot people helped me alot over the years when i was learning about setting up servers etc , so just paying it forward 🙂
@distant hearth Hey! You're usually really knowledgeable on this stuff. We are getting an inventory bug at the moment. Structures we've placed and game structures (i.e. drops, and charging stations). This happens on random feeding troughs, tables, etc. We have an issue where we cannot access these items and it is random. We have to log out and back in to fix it. Killing our toons doesn't work. Been trying to figure out if this is a mod issue, server issue, or official issue. Two mods that may be a problem are Visual Storage and Pull It. Have you heard anything? Anyone Heard anything? About this problem. Thank you!
i think its a game issue at the moment tbh ....
numerous people having same issue, modded an un modded, only workaround seems to be relog. or worse case scenario pick the item an put it back down again, i know cookers on ab having issues not showing mushroom broth an the only fix is pick up cooker an put back down
Oh thank god lol Thank you! Hopefully it is fixed soon it is driving us insane 😛
theres a major patch due this week, hopefully it fixes alot the little issues , fingers crossed
Definitely! Fingers crossed here too! Thanks again!
whats the command for nitrado server game.ini that i farm more silica pearls? bcs i get only 50 with 1 pearl and i want 200
Hey i had this same issue we removed all the storage mods re added them to the server and go everyone to wipe their mods list clean and then re install and it fixed it. I would place like a arkomatic forge and it would place a tek rep and im like wtf XD even without having the engrams unlocked was wild.
BTW the pull it mod the developer stopped working on the project and in his bio even says it is buggy so use at your own risk i know people like the mod but its a gample to run so that might be half your issue there screwing up item ids when they get pulled somehow
Thanks for the info!
Yeah I thought that was the case, however all the structures just say unlocked now 😅
Pick them up and put them down again.
Thank you! That sorted the issue!
How do I change the mating speed I want to change it because it's going to take 13 hours for them to me and I want it to be like an hour
How would I go about troubleshooting this when joining a server? I verified twice. :/
Assertion failed: Cmd.Type == REPCMD_PropertyObject [File:F:\build\LostIsland\Engine\Source\Runtime\Engine\Private\RepLayout.cpp] [Line: 1388]
That should be a mod failing to load
Delete all mod folders (those named with a number) and download them again
ARK\ShooterGame\Content\Mods
Got it, could it be that it's server side or strictly the client?
Could be both, especially since steam hated working togheter with evolved auto updating mods
Give a try on your client, it wont take too long to re-install them
You recommend disabling AutoManageMod? Considering shits not likely to update anyways?
Well, if you dont use it, get rid of it
Dont forget that you need to unfollow on the workshop if you plan to remove from your game (+ deleting the folder)
Yea, I'm going to cut the mods from client and server entirely and go 1 by 1, with the full reinstall. Then if one mod is broke broke I'll know right.
Appreciate the help!
Sorry to be a pain again. Been a while since hosting and I guess I'm not great at it since.
I have 4 running servers and with the default GUS and they cluster just fine. As soon as I swap the GUS.ini for my custom one I can't query the other latter 3. All my ports and connection info are set as start-up parameters per instance. All that changes between working and not-working is all 4 using the same default GUS, versus all 4 using the same custom GUS so I have to assume it's the custom GUS but don't know why.
Is there anything else that would cause the latter 3 to not Query?
Any ASA Windows "Pro's" online atm?
Would anyone with the paid version of beacon be willing to share an ini line to allow yi ling to spawn in the redwoods on the island? (yes I'm stashing some plant z seeds in the obelisk storage for this very purpose)
Any server owners out there with players that have the Zeppelin boat and it is horizontal instead of vertical? We asked the player to uninstall all their mods and if not reinstall the whole game yet it sounds like they didn’t fix it - curious if anyone has run across a solution?
Hey yall, I'm new to the server here buuuut I am trying to find an actual answer to a question if anyone could kindly help or lead me into the correct info.....Last I knew, ark survival ascended was crossplay but I can't seem to find the right answers. Just old stuff. There's 2 of us trying to google it. We are trying to crossplay ps5 to xbox. Please any assistance would be awesome and super appreciated
Non-dedicated has no crossplay functionality, if that's what you're trying to use
To be honest we have no idea what we are doing. This is the first time for crossplay. But i believe it would be non-dedicated. With that, how would we do dedicated? We are on the same wifi also
Any gurus around atm? lol - i have 4 dedicated servers up and running. I can see them on battelmetrics. i cannot connect to them using the ip found in battlemetrics however. They are all running on the same machine that is sitting on my desk in my office. I am on my laptop downstairs. Now I can connect with the game to each server using the open command 'IF' I use the local IP (ie 168.192.1.xx:port#) i tried each server and they are all up and running. now here is the issue - i have them all on the same cluster but I cannot see that cluster when I go to a 'tek transmitter' or 'obelisk' - when I pull up the list to see servers on the cluster there is nothing at all /facepalm.... any ideas what i have done wrong?
sounds like a port forwarding issue, the servers need to be reachable via public IP seen on battle metrics. If you can't reach that IP\port combination, then you wont be able to join from the in-game menus and wont be able to xfer from transmitters\obelisks
You need to port-forward from the router\device where the traffic is coming in to the local IP of the server.
Also need to be sure the server (windows) firewall is allowing the ports to be connectable from public internet. It may be configured to allow via LAN, but not via internet.
You can use tools like nmap , just google it, to scan your public IP and port to see if ports are listening or blocked. If they are blocked, its either port forward not correct or firewall blocking it
ok - thanks for this. now just to be certain I understand everything. I am running the servers on a local win10 desktop pc - so i need to check firewall there for being connectable? do I do anything on my laptop i am using for the game client? and my lan/router - i set port forwarding on that?