#unofficial-setup-help
1 messages · Page 88 of 1
ok, thanks for your help
if you dont enable cluster on nitrado you wont see the option
ok, thanks
On ase you didn't automatically have cluster settings on nitrado, I've not rented a server for asa. However in my experience if cluster wasn't enabled and linked the upload option wouldn't show up.
But I could definitely be misinformed
So @polar echo is right, when I enable CrossARK the item upload option does work, but then it only allows me to transfer characters to another server, it takes away the option to upload the character.
Just have to figure out why the item upload isnt working for me, i guess
I'll go through the config and see if I can figure it out, must be an incorrect setting somewhere. Thank you, I appreciate the responses
Cn anyone help with the admin gun in my friends server the range of the admin gun is pretty low and we can’t figure out how to adjust it higher and the dino commands will not work the gm summon! Dm me if u cn help
If this is a mod, you’d be better finding if the mod dev has a discord and asking there.
What should my cuddle interval and mature speed be for getting easier imprints on babies? I’m raising megatheriums if that helps.
It’s not a mod it the normal discord the admin gun is too short the red gun don’t work as far the dino gm command won’t work
are there known issues with omega dino storage or RR homedecor mod? we have very high ping on our server since a few days
Why cant my friend join my ark server with his apic client? Steam freidn can join. Its ark server crafted with steamcmd
evolved
huh?
i am the provider.
thats my best efford to enable crossplay:
start ShooterGameServer.exe Ragnarok?listen?SessionName=Ark-Am-Arsch?ServerPassword=penis?ServerAdminPassword=01001?Port=7777?QueryPort=27015?MaxPlayers=60420 -crossplay
exit
Quick question. If I disable a Dino from spawning on my server will this also delete already tamed ones? If so is there just a way to stop them spawning without deleting tamed
quite why you have max players set at 60420 is beyond me, but probably the epic player will need to join using the server ip adress an port,
google how.
you can look up the server on battlemetrics website to get the ip adress and port its using if u dont know it, port shud be 7777 as thats what the command line settting it too
It's pinned here
tsenks ju
Snow asked me to re-pin it a little while back so it should be the first or second on.
its the first pin 🙂
very confusion
-PublicIPForEpic=<IPAddress> just the ip adress?
and where to set 80 and 443?
just activate them on the router as the others?
ok gut
So for example rather than disable I added this, would it just stop Dodos spawning and replace them with nothing?
NPCReplacements=((FromClassName="Dodo_Character_BP_C", ToClassName=""))
Yep
Perfect. Thanks for the reply
is there a way to ban someone from your server thats not logged on to the server
how would i get that if i dont know where they are logged off at
evolved
xbox windows 10
yep
who is an expert regarding ark self hosting and epic games crossplay?
Does anyone know how to change the turret limit? I've tried disabling it in the settings and adding LimitTurretsNum to the config files but it causes a restart loop
does anyone know where i can see xbox gamertags and in game names of players on nitrado
Should be a section on the left called Player something. That will list every player who has ever been on the map.
yea i see that screen it shows gamertags and i can ban them is there a way i can see both the gamertag and there in game name
Nope you need to play detective
alright
my epic friend cant joine my self hosted server, steam works fine, why
If I upload my dinos off the island, then switch the map to Scorched earth, will they be there to download on to Scorched?
They're based on your account, not your character, so yes
Can anyone help me for this? for whatever reason on my ASA server i'm only getting one crate and its always the blue crate out of the swamp cave. Is there anything i can do to fix this? like a server command or in my settings for the server? Thanks for ur help
If you have custom drops and they arent done correctly, this can prevent other drops from spawning.
Hey folks, I was wondering if the windows 10 or steam versions of ASA are crossplay compatible with Xbox versions of ASA on a home run dedicated server?
Both are crossplay as long as it is a PC hosting the dedicated
It’s all default, I never changed any of that.. 😦
Is this single player?
Nitrado server
Thank you so much
if nitrado still has a setting random supply crate points, make sure its disabled or off.
So on my private server any new mods recently added won’t let me unlock the engrams for whatever item comes with them. Be it an update or what have you. Is there something that needs to be done?
I am trying to setup crossark transfers for svartalfhiem and the island in prep for SE. We are running into an issue where transfers work perfectly until a player plays on a server outside our cluster. Once they do this their character on our cluster is 'lost'. I see their file in the cluster folder but they only get a character create screen... Any suggestions would be appreciated! (cmd lines used in tests|| (-NoTransferFromFiltering -clusterid=xxxxxxxx) || ||(-NoTransferFromFiltering -ClusterDirOverride=D:\arkservers -clusterid=xxxxxxxx)|| Both in separate install folders and in a shared install folder.
I don’t see this option, is this a line in game.In or gameusersettings?
quick question. Say someone transfers servers, they crash mid transfer, the game cant find their character...
There is still a file with there EOS_ID in the "cluster" folder.. how do i turn that back into their account with out it crashing the server?
of i change the file type back into an .arkprofile, and move it back onto a map, it crashes the server. so is there any way to save that persons account?
Its a checkbox on the General settings page
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemConsumable_Kibble_Base_Special_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemConsumable_Veggie_Citronal_C",BaseResourceRequirement=2,bCraftingRequireExactResourceType=False),(ResourceItemTypeString="PrimalItemConsumable_CookedMeat_C",BaseResourceRequirement=20,bCraftingRequireExactResourceType=False),(ResourceItemTypeString="PrimalItemResource_Fibers_C",BaseResourceRequirement=5,bCraftingRequireExactResourceType=False),(ResourceItemTypeString="PrimalItemResource_RareMushroom_C",BaseResourceRequirement=2,bCraftingRequireExactResourceType=False),(ResourceItemTypeString="PrimalItemConsumable_Veggie_Rockarrot_C",BaseResourceRequirement=5,bCraftingRequireExactResourceType=False),(ResourceItemTypeString="PrimalItemConsumableEatable_WaterContainer_C",BaseResourceRequirement=1,bCraftingRequireExactResourceType=False)))
Does anyone see anything wrong with this line? All my other kibble changes have worked except this one, I even tried copying a different kibble and just changing the kibble name but still nothing
i actually think this may have fixed it. i'm going to try now. thank you guys ❤️ @wise kindle @distant hearth
Hi everyone, i am trying to implement the soap to element on my server but for some reason only the first half (element shard to soap) works and the second half (soap to element) will not show in game. from the videos i have watched i have input everything correctly.. Any advice would be wonderful
These are my codes.. im not sure why it isnt working
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemConsumableSoap_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemResource_ElementShard_C",BaseResourceRequirement=100,bCraftingRequireExactResourceType=True)))
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemResource_Element_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemConsumableSoap_C",BaseResourceRequirement=1,bCraftingRequireExactResourceType=True)))
never mind ;/ this didnt work 😭
If its a cave drop, they dont always vary. Sometimes a blue drop spawns in the same spot every time. Unless you are saying every cave drop in every cave in every spot is blue?
No, only for swamp cave it’s bugged out, other caves like ice I get blue yellow and red and they all respawn. The swamp cave only spawns in the blue one in the same spot
Does anyone here know how to save custom loot drops? I just recently started a server for my friends and I and I am stumped. Been struggling with this for the past couple hours and YouTube isn’t helping lol. I downloaded beacon and got the drops set up but it doesn’t seem to want to show in the drops on the server
Player has a character on my server and is transferring between svartalfhiem and the island with no issues even after multiple transfers. Player then stops playing and goes back to the main menu and goes to another server with a completely different character. When they come back later to play on my cluster again their character is 'lost'. I can see it in the clusters folder but they only get the create character screen. I have tested this with my own character and fell foul of the same problem.
I can see the character reference in the cluster folder and I can see only their .arktribute file in the island save folder and no save reference in the svartalfhiem save folder... And yes I understand where they should be and so do they but the character is just gone.... it seems like something about playing a different character on a different server is some how wiping the character on my servers if they are using server transfers between these two maps
Yep I do understand that.. hence why I can't figure this out...
tried copying the file in the cluster folder to <filename>.arkprofile .... game created a <filename>.profilebak as it should but still only the character create screen... going to try a full rollback and clusterfolder delete. everything in one install folder with altsavedir and this cmdline ||ArkAscendedServer.exe Svartalfheim_WP?SessionName="xxxxxxxxxxx"?AltSaveDirectoryName=svartalf?PreventUploadDinos=True?PreventDownloadDinos=True?RCONPort=xxxxxx -port=xxxx -WinLiveMaxPlayers=25 -NoBattlEye -ForceRespawnDinos -exclusivejoin -clusterid=xxxxxxx -ClusterDirOverride="D:\arkservers" -mods=962796,930404,942024,955451,935528,929785,949521|| edited for each map of course and try to run more tests... will report back when done
new character create works fine just they are new so lose tribe and access to all things which of course can be admined back but does not fix the issue happening long term as I cannot spend all my hours admin resetting characters should the player go play another server.... and yes altsave was within same instal... before coming here I tried many configuration/cmd line options. The one I am about to try is a stripped down generic cmd line in a single install hence the altsavedir just to remove any variables between them.
it just overwrote it
will do that in these next tests.. since I can replicate with my own character I can test and watch without pestering them to retry a lot.
So I ran a lot of tests and it would seem svartalfhiem is just not handing the profile to the island or the island is refusing it. Either way no matter how I transfer or attempt to correct things the profile just never gets replaced on the island server after leaving svartalfhiem... Interestingly I could transfer back and forth with no issues even when there was no player profile file on either server. Of course when logging out this would mean there was no character all remaining as the profile file was lost on the first transfer back to the island... replacing the profile with a backup would restore the character but sometimes the game would crash on login but may be unrelated to the profile replacement... I am going to create a fresh install - no mods and attempt to recreate this behaviour.
Hey guys, can anyone give me advice for Nitrado server maintenance. Are dino wipes and restarts important and should I be doing these daily?
A restart daily will not hurt anything, especially if you have mods. Doing a daily dino wipe can be helpful for overspawns.
Thank you! That triggered a thought and since this machine was rebuilt but the drive just installed and used as is from the previous build there may be conflicts in ownership underlying this.. will go down that path a bit to see. 🙂
If I set DisableStructureDecayPvE=true why would structures still be decaying when logging back in? Do structures get set into some sort of decay=true state at the end of their life and is there no way to save them?
Using that config turns it off completely. They won't decay. Users will have to manually demolish buildings.
u are telling the server to be pve right?
Yup
It previously had autodecay on. I've turned it off, but as I login pooof - all gone. So odd
always worked fine for me so not sure why it cause u issues :/
ServerPVE=True
DisableStructureDecayPvE=True
those two lines under [serversettings] header in gus.ini is what i always used
yea also check game.ini for this line ,
bAutoPvETimer=false
i think it can just not be there to be off by default but can rem off top my head
ignore me chaps... i've found my error heh
duplicate?
Missed cmd line arg - foolish
i keep my cmd line bare minimum, use beacon a bit , but usually just to cop paste the ini lol. yea yea i know im weird
i dont like that beacon adds its own lines to the ini... which i know dont matter but it bugs me lmao
yea , i know , tbh if i had a large cluster id prob just switch fully to beacon
yea id bet, its so cheap too despite the free version does so much stuff anyway .
i have always just done stuff manually so got used , my way do things hahaa
yea i dont like that way, wont work when aberation comes out
well i guess it can , but lot more work
it uses a custom day / night cycle
i say custom, non standard
yea, many ways to skin a cat .
i just have a method i use an know works for me lmao
yea makes sense, i never ran own ase servers , they was all on host services, along with the other couple dozen i looked after for other people lmao
aye 100% if nitrado didnt have exclusivety for asa i wud never known self host wasnt that hard
i was on xbox for many years so it wa snitrado or no way
it was ok, i used my laptop to configure the servers, manually backup etc .
many years of dealing with them put me off.
the main cluster i looked after was from an affiliate of theres that streamed so they was really good, wasnt till later on using private accounts i realised how bad they were
the affilate servers i cud contact support an get things sorted under an hour 99% time.
the private ones , days later still no response from support , then get connected to someone that knew less than me
oof
that sounds about right tbh, u know there shoving ton servers on vm an hoping for the best
shared vm id guess, they get away with alot as server dont get used /less use than others etc .
lmao that is funny, im in uk. we always go for the german server , there better, lower ping an smoother than uk london ones
yea i think when more maps release nitrado will lose alot buisness as it becomes more cost effective to rent dedicated
is there anyone that recon this line from the server? FNetGUIDCache::PeriodicCleanAndCompact: 11.43ms total time [ 9.70ms CleanReferences() and 1.73ms compacting]; ObjectLookup.Num()=75955 [54 removed]; NetGUIDLookup.Num()=75562 [393 removed]
Cant fint what mod and what it is... think it has something with decay to do... we have a problem on the server where structures are disapering like doors and stoarage...
This is appearing on everyones server, something WC added. No idea what it is.
aha okey... hm weird stuff
Im guessing its related to garbage collection
but the garbage collection.. i thought that was the dino depot mod
do u have alot mods? maybe some conflict causing the issue.
on the pve server we dont have many.. .but many mods are relativ... we have like 15
but on the overhaul we have 35
yea good point, i consider 15 alot, but if u have 15 building mods, thats likely cause issues.
ea game, third party mod coding..... well headache
i bet there is, lolz
but it was just a wild exmaple
haha no not just building... dinos, storage and other smal server stuff like admin panel and ASa-bot
both server cause the issue or just one?
jsut the one.. .
if just one, then u already can narrow the list , if any mods are shared
yea 15 is not much...
its the same mods only morre on the one thats dont have issue
soo thats not narrowing down..:)
thats good, discount the mods that are shared, then look at the building mods not shared an see what ones might be iffy
I got rid of any possible ownership issues fresh installed the partition,server software and created a 1 mod (Giganatoraptor) 2 island map cluster. I even tried to run the servers as admin and Still it will not save the profile when transferring to the island... Am nearly at whits end here 😦
bat 1
cd \
cd arkservers\xfrtest\ShooterGame\Binaries\Win64
ArkAscendedServer.exe TheIsland_WP?SessionName="The Island XFR Test 1"?AltSaveDirectoryName=xfrtest1?RCONPort=xxx21 -port=xx83 -WinLiveMaxPlayers=25 -NoBattlEye -ForceRespawnDinos -clusterid=xfrtest -ClusterDirOverride="D:\arkservers" -mods=975282
cmd /k```
bat 2
```D:
cd \
cd arkservers\xfrtest\ShooterGame\Binaries\Win64
ArkAscendedServer.exe TheIsland_WP?SessionName="The Island XFR Test 2"?AltSaveDirectoryName=xfrtest2?RCONPort=xxx23 -port=xx85 -WinLiveMaxPlayers=25 -NoBattlEye -ForceRespawnDinos -clusterid=xfrtest -ClusterDirOverride="D:\arkservers" -mods=975282
cmd /k```
the machine is a 2x xeon E5-2960v2, 20cores @3ghz with 192gb of ram and the servers are on 1tb samsung ssd's. Ive run ASE clusters and Atlas grids with no issue and I am completely stumped by this atm.
Hey guys - im prepping for scorched. would anyone know what setting i would need to change to make sure wyverns need 1 x wyvern milk ?
there isnt a setting specific to do that, its impossible, as a level 15 wyvern wud need more feeds than a lvl 150
yeah im looking for wyverns over 150 to have 1 wyvern milk haha 🙂
what is the cd \ command doing ? is on linux ? sry im not good with puters but did alot testing with asa command line on windows
you can raise one with no milk ,just got know how ... the setting u want isnt a thing....
You would need a mod for that I think, not sure if anything like that exists.
Id just tweek maturation on that map so they grow up before they need it.
Like 50x maturation or something.
i dont mind doing the whole server settings, i just want to slow down the higher wyverns so they some milk otherwise wyvern miilk will be obsolete on my server
its obsolete anyway , cryopods exist
No as the rig still performs every single thing else it is doing with zero issues... I could probably transfer everything to my personal rig but not sure how that would be much different besides the OS being win 11 vs win 10 on the workstation. but will try after tea for the heck of it.
true but some people might not know that XD
i want people to use a wyvern milk to on their baby wyverns to grow. current settings they wouldnt need it
afaik its not possible, u can lower all dino growth speeds, but then theres still ways smart players get around it ...
technically redundant, it ensures the dir is cleared to root before the cd cmd below it... but saw it in Skarvig's vid on cluster setup so desperate to try just about anything atm.
but its all still relative to egg level, a lvl 15 dino needs more food before it die than a lvl 150
I guess raise the baby hunger?
yeah baby hunger may do it !
food consumption I guess
gonna try to remove the redirect on the cluster so it sits in the main folder ... after I try the current set on my main gaming rig. cheers
well here is the thing, kiss
im dumb so simple works for my stupid ass.
i do from sepearate folders for each server , use the clusterdiroverride , but dont make that folder manually, let server do it .
i.e -clusterid=asacluster -clusterdiroverrride=d:\asa1cluster
when u login in map an go to transfer it will make a folder on d drive , called asa1cluster , inside tht another folder with the cluster id name , in this case asacluster
in that is where the files stored for loading into map
it shud be noted that there are know issues with asa transfers,
if u have a char in upload already it often just fucks up the data an wont let any downloads.
if u dont stay on the map u transfer to till a world save happens, some times it doesnt transfer the ark.profile to the map save file
ure prob right, im going off memory , which mine is bad
specifying the folder only causes the cluster to be at that level.. so with your example your cluster would be d:\asacluster\clusters\asacluster.... by leaving it d:\ for example it would then raise to d:\clusters\asacluster which is why I just use the d:\arkservers path.
but anyways gonna try the default so it puts it in the default location for testing to eliminate that as another issue
So is any word of SE confirmed yet?
This channel is for server setup help. #announcements has all information available.
Yea I wanna setup my server using SE
It would be super cool if they would stop breaking the fix for the babies floating to the sky barrier 🤦♀️
is the game.ini just blank for ASA?
it is on first server bootup yea , it defaults alot stuff. then u can add to it iff u want to make chamnges
Im trying to find some specs on what is required for ASA servers to run. Does anyone got any?
to run well , couple cpu core 2.2ghz up , 16gb ram an say 25gb disk space . for upto 20 players
they will run on on less, depends on the player count, mods etc . mostly it likes ram
How long are you letting character stay/play on map after transfer ie 10-15 min or are you logging straight off after trans
And sorry I'm coming in late in convo I tried to read up on whole issue but I'm sure I missed some
How do I use Rcon with my ark server? Going to use ARKon but it seems to not come with a instruction on what do.
Do I need to add the mod for the Gigantoraptor to appear in game or is it now in the base game?
Anyone a good coder for fiber craft? dm
Yes.
fibercraft code is just a whole ton of game ini crafting overrides, ark beacon omini app can do the code for you in 1 click of abutton.
i dont know if the free version does or not though as i had the paid one for years
pretty sure if you google fiber craft ini , you can find the codes needed tbh
I have done both. It would seem the profile isnt transferring which seems an instant thing when I was moving to svartalfhiem... I did some further tests with an ultra simple cmd D:\arkservers\xfrtest\ShooterGame\Binaries\Win64\ArkAscendedServer.exe TheIsland_WP?SessionName="XFR2"?AltSaveDirectoryName=xfrtest2 -port=xx85 -WinLiveMaxPlayers=25 -clusterid=xfrtest Which did allow the profile to transfer to the proper place... I am now in the process of determining why it worked where others fail... ie long server name, target override dir location etc etc... Going to build in complexity till it fails again.
that command line is already got an error tbh as u have
AltSaveDirectoryName=xfrtest2? -port=xx85
the ? is used before a command not after , shud be ,
AltSaveDirectoryName=xfrtest2 -port=xx85
far as i can tell the ? tells the server to look for a command, if its not there or wrong it ignores it
good catch remnant from an edit as I have already stepped up complexity... that was the one tested that worked... fixed it to look right just now 🙂
i apent a few days messing with command lines so i figured mostly what stuff does lolz .
lots time an effort but it helped me learn what was going on, to the point i realised u can starta an asa server with simply arkascendedserver.exe theisland_wp
if its run from the folder the exe is located
gives it a random session name asgined in the gus .ini and port udp 7777
Aye 🙂
Am relaxing with some game time the now.. needed a break from cmd lines and restarts hehe
enjoy , taking a break often time u come back an be like , ah i see . click tap tap , sorted
what setting does the dino cap level fall under? I believe it's naturally at 450 but should be changeable right?
ilevel cap as in the official cap to delete dinos over that level, or the max level of wild dinos ?
level cap, not max wild levels.
its something like
DestroyTamesOverLevelClamp=450
450 being the official setting, i think it also needs usestatclamps=true
Thank you I found it in Beacon. The wording for it was weird.
most of ark code is weird or bacwards, you kinda get used to it after a while lmao
True.
Anyone having connection issues with their clusters?
Do we still need to use the xbox app to purchase a nitrado server? (To play on the server from xbox) I have credit on the nitrado website so I would like to purchase it from there if it works. Thanks.
Thanks 😊
i try to turn off wild babies from spawning but not working, anyone have a working line ?
there is only one line ,
-NoWildBabies
as a server start command
if ure on nitrado , until they put an option in for it , your stuck with them .
Do I need to put the dear jane mod id in my command line like other mods?
You can self host too
You do not need to go nitrado. You can rent a VPS or bare metal and run one for much cheaper.
Does Xbox unofficial just not work ATM or is it just me? I've tried every suggestion the Internet has. Im trying to host a non dedicated on ASA on Xbox X to play with my friend who's on PS5. Server doesn't even show up in the server list. She has everything checked correctly when searching. I've tried making it private and public.
I still have the valentines event and gigantoraptor mod on my server, Have they been integrated into the main game yet?
Hey guys I cant get custom skins working on my unofficial. Ive tried adding custom skins like mickey to both server and client but there is no option for it on my cosmetics tab when I right click the slot. And I have the following in GSU.ini
[ServerSettings]
CosmeticWhitelistOverride=URL
love ascended been in it since 3/11 patch all patch notes are in #patch-notes Love Ascended : Migrated needed assets into the base game so the mod can be disabled.
thanks
last i knew non dedicated was not crossplay
That sucks. How you gonna have a cross play game without the cross play smh
works fine on a dedicated server setup for it, the only exception is on non-dedicated servers
Just to be clear the custom cosmetics option on the menu doesnt even show up. The last menu item is split stack when you right click the option
I'm aware. I just don't feel like paying $16/months for a server that my friend occasionally hops on on her day off. If a game is marketed as cross play it should be completely cross play imo. Maybe by 2030 😔😂
so find a common dedicated server to play on together, not that hard
there is a new menu, next to the folder view button.
What part of "day off" doesn't ring your bell. If we played on a server our dinos would starve to death between the times we were able to play.
Dang that is not easy to find. Appreciate the help
yo can anyone help me get started? Im new
Use”URL” with parentheses
There's multiple ways around that....one of which doesn't even require mods to do it. They can certainly help with that but are not required with cryopods in the game. Not to mention some server admins may be willing to modify their servers if it brings in people to play on them. Get a friendly admin and you may be able to have them customize it to your playstyle.
how do i host a modded server that i can play on with my friend
has anyone run into issues with windows defender on server 2022 locking up and crashing the server when trying to scan the asa server files. We've been tracing some issues and it all seems to point to a conflict with defender and asa not playing nice. Defender tries to scan, asa says the file is open and won't release it with enough time for defender to retry or move on causing it to lock the service and crash the server.
when i go to buy a server and it tells me like 10-20 or more slots, what are those?
My server keeps crashing for players when they use a sickle to harvest. Any idea which setting is causing this?
Someone knows if the GCM is bug?
I have tamed dinos starve rate set to 0.1 on my servers for that very reason. I like to take breaks spanning weeks or months and never have to worry about tames starving. The beauty of the setting I use is that it doesn’t require mods and it also doesn’t effect the taming process only dinos once tamed.
definitely another option
It’s set like: CosmeticWhitelistOverride=979950,977906,985934 and so on
Anyone elses server just got wiped ?....
After the cash update today ?
Everything is gone
Uofficielle server Forglar
We are in contact with Nitrado ....😢
Nitrado had opdatet it and starter it again and everything is gone.....
We still have island
But there is a opdate on on server but we are afraid to opdate ...
Nobody?
it happens , if you dont have backups or any manual backups, only nitrado might be able recover it
Never happened before
We have backs up
But all mods have also been taken of ?
By who ...
by computer magic
just add the mods back, somehow the server got wiped when it did its update, add mods back, load backup to before it happened, hope it works
Okey thanks 🙏 we Will try
We had g portal before and had no problems
But we can only rent at nitrado now
Anyone knows how to use beacon to change the cost of crafting element? I want to change the cost from Shards to Obsidian. 100 Obsidian = 1 Element
I'd like to slow leveling down a bit on a Scorched Earth server since those playing on it agreed. Do the settings for experience gain accept fractions, something like below?
KillXPMultiplier=.75
I’ve got a couple players complaining about supply drops losing health abnormally fast, is there any INI to adjust it?
Using beacon for it is ideal.
@stable ledge Yeah, just have to figure out how --> Used some instructions but they're not working
You go to the crafting requirements section, add element, then adjust the element crafting requirement to be 100 obsidian.
I don’t think it’s a beacon omni only feature.
Does anyone know all the coordinates of the artifact caves in svartalheim?
Yes, it accepts floating point values just fine. But use 0.75 - use a leading 0
hi does anyone have any idea why im getting the error shootergameserver was unable to start 0xc000007b
depency walker says it cant fine loads of dlls which are in the binaries folder and are definetly there
how ever even a fresh install doesnt work
How do I adjust dino resistance? Like nerfing a dino in nitrado
https://ark.wiki.gg/wiki/Server_configuration#DinoClassResistanceMultipliers
use ctrl f, search for resistance
go through till you find the examples of code adjusting the resistance,
then u will have to look up the creature id for the dino u want to change
Thank you for the tip!
thanks home dawg
DinoClassResistanceMultipliers=(ClassName="RockDrake_Character_BP_C",Multiplier=2.000000)
Just keep in mind that multiplier kinda works backwards from what you'd expect.
If you up the resistance, it takes more damage, if you lower resistance, it takes less.
Because...wildcard. 🙄
always ass backwards coding
TamedDinoClassResistanceMultipliers=(ClassName="Stego_Character_BP_C",Multiplier=0.8) is this correct?
and is this also correct for replacing dinos NPCReplacements=(FromClassName="Carcha_Character_BP_C",ToClassName="Thylac")
ToClassName=Thylacoleo
Iirc
correct to do what ? that code will make tamed stegos take less damage ,
The replacement code is wrong, you need the whole dino character name, like the carcha has the whole name ,
Carcha should be correct
you sure it wont make them take more damage?
(FromClassName="Carcha_Character_BP_C",ToClassName="Thylacoleo_Character_BP_C")
from memory , double check it
im going off memory, so not certain, in fact i read the wiki just now an yes it seems your right. it will make take more, sorry
alright thanks
Updated to 36.25 this evening and now our server not showing in server browser for me and others. I can't find the post but I think I read someone else had this issue. Any suggestions to help resolve most welcome.
OK who has good knowledge on cluster transfers ? @distant hearth ? OK situation is I want to delay item and Dino transfers to SE but allow characters is it possible yet ? I know it wasn't prior but curious if anything has changed yet
nothing has changed, but we can just hope the scortched earth update fixes it.
i cant see them wanting officials to have full transfer
OK thanks I was sure but just wanted confirmation 👍
anyone know how to fix the stuff with nitrado not showing certain mods
like i can see paleo ark on my first and oldest server
but on my newest server I cant see paleo ark, the new server being purchased today
my other admin cant see it on the new server either
Cant see it in Nitrado or on your map?
Cuz it doesnt look crossplay, so if your map is crossplay then it wont show as an option.
I just bought a ARK server from zap hosting and i cant find it by favorites or the server list what do i do
ARK: SE (+ Ragnarok, Aberration) Locatioin LA
theres gotta be some sort of picture otu there that explains how far resources respawn next to structures 
There is a screen on:
1442787.zap1193846_g617821- (27.03.2024 11:46:07) (Detached)
1 Socket in /run/screen/S-zap1193846_g617821.
Shutdown handler: initalize.
Using binned.
4.5.1-0+UE4 7038 3077 404 10
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Setting breakpad minidump AppID = 346110
One of my logs
Did you out in a ticket with zap hosting? What did they say?
They said there server is up to date with steam and restart server
If you just ordered it and havent touched the map yet, thats on them to get it running.
Can you try to join it and see if it works
Maybe it’s because I don’t have a ark event listed in the settings
Hi so I opened creative mode on my ASA unofficial server and I still don’t have the admin blink rifle. How do I fix this?
enablecheats <youradminpassword>
cheat gcm
this shud give admin rifle then you press one the buttons to cycle through, destroy,blink and info modes of the admin gun
Right I’m aware that SHOULD give me the rifle, but it doesn’t
Enable GCM to disable the command, then respawn or fast travel and enable it again
Do you have an an password setup on the map? A password is required for admin mode.
A password on my server?
Admin access always requires a password. If one is not set it will not let you use it.
Please fix the anti mesh settings for servers. Our server has it off and people are still getting killed by landing on the side of volcano mountain
I dont think that’s correct but thanks for the idea
If he means an admin password, I have a password set up.
The issues i am running into aren’t related to a password
🤦♀️
Admin password
I understand lol
The issues in running into are two at the moment. My inventory is completely empty with no implant, and when it has an implant and I try to craft something, nothing shows up. And my blink rifle isn’t there
Gcm
What’s the long code? 
Ok I’ll try that
My server is 358.24 would that have to do with anything of me not bneing ale to see it on the sessionm list
Is there a difference between Ark and ARK: SE (+ Ragnarok, Aberration)
?
Im playing survival evolved
Renting
What do i say
Im currently doing that and it seems there as lost as i am i feel like i have to be doin gsomthing wrong
Inventory empty is typically a corrupt game install. If transferring, respawning and reinstalling all the mods on your client do not fix it, the only other solution is to reinstall your game. Its a common issue atm.
Are gigas and carchas still not spawning, any suggestions?
Reinstall worked, thanks so much
need any help dm me ive ran multiple on evolved new to asa but almost same aspect
Anyone know the Spawn code for the animated rex skin?
Nitrado?
No, hosted
I was having this same issue yesterday until I turned off the extra gigs charcha mod, then turned it back on. Then I wiped all wild Dino’s and it fixed it
Also keep in mind the spawn chance is still under 3% and is normal if it takes time to see one
What is the cartridge mod?
There is a mod if you just type “Giga” it will show up. It increases the spawn chance for gig as and carchas
Perfect, I'll add it to the list of mods, I thought that when I updated the svartalheim, the gigabytes would appear on their own without the need to add another mod
Do you have hosting too?
I noticed sometimes clicking the mod to uninstall then reinstalling fixes problems. Make sure if u change any mod that messes with Dino’s or Dino types that you wipe all wild Dino’s after you start server back up
I host nitrado server for me and my buddy
I'll keep it in mind
.
Do you know the bot manager called UACA'S. ??
Any ideas why this week we have had summoners in the oceans on one asa map and now wild turkeys on the beaches on another one?
Yeah I definitely need your help
The settings to block item and dino downloads are broken?
If not then you can set download blocks on those categories in the configs.
Sorry it's hours later but I was using the blocks just fine a month or so ago
The settings arent broken at all, it creates a different issue. Disabling either items or dino transfers cause a bug that gives errors and blocks character transfers telling players they are carrying prohibited items when their characters are full naked. Repro’able with fresh naked respawned characters. Anyway, its random but frequent and occurs often enough to warrant just telling ppl to not use these atm. It just creates too many issues and blocks more players than it allows.
presumably they'll have to fix that for SE launch
does anyone know how to get the skin from the "Magical Unicorn" mod? there doesnt seem to be any info for it. I've searched all engrams for something related to it but nada.
need some help with breeding rates on my server. i have put in EggHatchSpeedMultiplier=15
BabyMatureSpeedMultiplier=15 and still nothing is changing??? and even changed it in the Nitrado tick box page.
Can someone give me rathole location on the map caballus??
Anyone I need a good Coder which can help me on a fibercraft 1000x no wipe? Message me if you are a good coder
Hey does anybody know how to make a cosmetic mod whitelist for a nitrado server, since devs haven't updated the official whitelist in a month?
you can try this others have said it works,in the game user setting ini , under header [serversettings]
CosmeticWhitelistOverride=xxxxx,xxxxxx,xxxxx,xxxxxx
where xxxx is each cosmeticmod id u want to have on the server
changes that you make will only effect new babies and babies hatched from new eggs in the world
Thanks, I'll try it out
Ohh man that sucks, I'd be willing to bet it's the custom skins in the cosmetics tab that you cant throw out causing the problem.
Thanks for the explanation!
can increase the mutation chance on my server?
Yeah it seems to think skins are still on you - I think its the 3 custom cosmetics icons that are supposed to be permanently in your inventory. Having any cosmetics seems to alter those and they bug the system out.
Is there a way to change how many generators are allowed in a area. ? I've got a mod that's suppose to be unlimited but only admin can craft that
look up "limitgeneratorsnum" in the ark.wiki.gg server settings page to learn more on how to set this.
i dont think wiki is updated with those commands yet ,
set this in the game ini and it will allow unlimited generators
LimitGeneratorsRange=1
basically what it doe sis change the checking range for generators to less than a tile , so u can place as many as u want .
Thank you
Thank you
Does anyone know if wildcard fixed transferring while items are disabled?
not yet, can hope with the next update if they manage to deleiver scortched on time in a couple days
When I start servers in Ark it replaces adminpassword in GameUserIniFile with the password + everything that comes after up until the end of the bat startup line that ends with RCONport=xxxxxx Does anyone know why it does that?
put the adminpassword as last thing in that section
Solved it in a different way but putting it in the end sounds like that would work too.
I have recently started playing the ark survivor evolved once again, but regardless of which world i choice, i encounter the same issue. I play and create a lot of progress with my son, we play as two players. The. I exit to the main menu when finished. The progress saves, but it always makes us both create a new survivor and we end up starting from level 1. We can also find the survivor we created with our progress just sleeping next to our dinos. We have also tried choosing “spawn at random location”, but it takes us in an infinite loop of doing it over and over again. Only way to play is to create a new survivor. Please help. How do we fix this issue so we can keep using our current survivors?
Playstation 4 and playing single player coop i belive
Any clue on how to find support?
If i delete the app will i loose all saved data? Meaning saved data in my other profiles?
Gotcha. Thanks for the suggestion. I may need to do that
I started other worlds from zero and they all do the same thing
Did this work for you? Saves me taking down a server to test it haha
Still haven't tried it
Alrighty
really random thing can anybody else put pictures on canvas on xbox or is it broken
i take the picture and it doesint save or show up when i hit the canvas with the paint brush it dont show up in the saved pics
Does anyone know the console command to force the server to redownload the mods?
Nitrado
Ok.
The dear Jane doesn’t have the second or third notes and we think the server mod isn’t right
Never mind. There is an update. lol
How do I switch from the island to one of the mod maps?
How do I increase the boss health for my server? I'm currently mutating a bunch of really strong dinos and I'd like to increase the amount of health the bosses have to compensate for the amount of damage my tames are doing. I'm wondering what ini settings I'd have to edit to make that happen.
Can someone explain me or point me to a guide how to set up cross map chat on asa cluster
Well my max dino level currently is 450. And I'm currently preparing to take on all the bosses on alpha difficulty.
I did that but now it’s not showing on the server list even tho it says started 
Hey, not sure if this is the right section to ask, but was wondering if any of you might know that if i buy the game on a second steam account and use the in game dedicated server function, do i still need to forward port on my router then?
Since i am currently playing on non dedicated with a friend and there it is not needed
Ah oke thank you for the info, rly appriciate it! Might need to try that then, already have the cmd one.
But didnt do the the port forwarding as i heard that there might be secrurite risk with setting those ports open, do you know if that is an issue or is it alright to set them open?
I think non dedicated uses a steam port that is open, but i have no clue which one it is and i dont think they say it anywhere aswell sadly
Nicee thank you, again really appriciate it! 😄 will try and do the porting thing then, hopefully it is not too complicated with a vid on youtube about it 😅
im working on a unofficial server manager would that be somthing any of you gous would be interested in?
Transfers without items still broken? Really don't want to add SE with completely open transfers on day 1
PreventDownloadItems=True , does not work for me as the cosmetics seem to stop the transfer , i would also like a option to stop vanilla cryopods from being deployed on SE if the transfer settings are not fixed .
good morning, i have a quick question. i noticed this is showing up in the Logs on my server FNetGUIDCache::PeriodicCleanAndCompact: 9.86ms total time [ 9.85ms CleanReferences() and 0.02ms compacting]; ObjectLookup.Num()=63471 [0 removed]; NetGUIDLookup.Num()=63471 [0 removed]
can someone explain to me what it means ? also noticed ive didnt seen it the last time i checked. musst say last time i checked was 2 weeks ago
Does disabling custom cosmetics do anything?
Ok so an update on the transfer issue a couple of days back. I still am unable to get any island server to accept a transfer in to it and save the profile to disk reliably. There are still many times the profile just never copies over BUT the svartalfhiem map always copies the profile to disk if there was a profile to be deleted from the transfering origin. So I can only surmise there is some issue in the way the Island is handling the incoming player transfer.
Now to the good news part of this -usestore / -BackupTransferPlayerDatas works fine as a way to combat this problem. As I noted in my previous posts the characters leaving the island would transfer the profile fine to svartalfhiem but when they would go back to the island the profile would not transfer properly yet still as long as the player did not log off they could continue playing and transferring without issue. Once they logged off because no profile was being transferred or saved separately to disk correctly they would be lost. The only thing different I could determine when using -usestore is if the server 'crashes' after a player transfers but before a server save the temp profile is not enough to recover the player at the point of transfer it instead becomes a mini rollback, based on server save times, for them as they must go back to the last server they were on before the transfer/ server crash event.
It did not work , the only way to travel to another map on my cluster was to allow items , so a cryopod seems to be a item , so you can travel with a dino and items to a new map . This is not what i want , i only wish for characters to be able to move from the island to SE for the first week or so .
Lets hope the cosmetics/preventdownloaditems issue is sorted on release but its a bit of an oversight. Only realised this was an issue now as I've set up a 2nd server in prep for the map release. Was running checks to see what issues might occur and here we are lol
If you find a work around , fix , please post so we all can benefit .
its been this way since they released clustering
ive just had players making 2nd characters on svart
but the person above us seems to have been posting hella problems with that
is obelisk data character or account bound?
ie can you upload with one chara and download on island with another
i always thought it was character bound but people seem to be telling me differently
its account bound
So if I open item transfers in 2 weeks players could transfer items from their SE character to their island character via uploading without losing their main island character?
should be possible. but you might wanna test it first
transfer is still very buggy sometimes
Yo @olive talon I found out the way. (before any of this you would need to use radmin VPN or anything similar to create a room on it) So I would host non-dedi srvr and after that friends would go into singleplayer, open cmd and type "open IPv4". instead of the real IP they need to go right click in radmin - friends IP - properties and copy IPv4 paste it after open and it will connect to host's non-dedi srvr. I hope this helps (I tested it yesterday it worked perfectly).
You really don't have to ping me for any of this. If you got it working then good.
Sorry for the ping. ._.
Hello, just curious how Premium Mods work.
1- if i buy a premium mod and install it on the server does that mean Everyone needs to buy the same mod in order to play it ?
2- how does the purchase process work ? (will i lose it and i need to re buy once i get a new pc?) (is it locked to my steam?)
1: yes everyone needs to buy it to play on the server
2: I think it would be locked to your EOS ID....which is locked to your steam account....so just login with the same steam account
We are disabling cryopods on our SE and disabling dino downloads...That way players can only bring items and no tames. Most of my community like the fresh start anyway, so most will travel light
Putting -EasterColors into the startup.bat for the server doesn't apply. I just applied the update from SteamCMD
where do you put the -EasterColors line if on a Nitrado server?
I too am confused by this lol
Im searching old Ini's. I seem to recall a line added to the GUS in the past for things like this... Just dont remember lol
It was something like ActiveEvent=Easter
yeah something like that... hehe Gettin closer
the update has not been released yet for unofficial servers
Name Build ID Time Updated
public 13865069 3 days ago
Was in the released patch notes, forgot that it takes 24 hrs for a patch to go live on Nitrado lol
Do you know if we will need to do anything to turn the event on for our servers?
It's in the patch notes for unofficial servers
I am new to this an very inexperienced when it comes to bat files and how to handle them 8)
so dont mean that patch has been released for unofficial yet
In past we just had to add a line to the GUS Ini. to activate it
"Unofficial servers can enable this with the parameter -EasterColors"
yeah that, just doesnt say how to do that via Nitado lol
Clearly can't enable anything lol
I've seen this instruction, I just dont know where this is done or how it is implemented is all 🙂
im sure the Ini line will get announced soon as well.
No rush or worries, I'm cool to wait patiently if it isnt available yet for unofficial
it a be a start command arg, for people not on nitrado once the WC overloards decide to release the patch for unofficials
im searching some of my old inis to see how it was written in the past. something like ActiveEvent=blahblah
-mods=927090,927084 -EasterColors That goes in your bat file
It will enable the Christmas, Valentines, and supposed to be easter event
Nitrado doesnt use Bat files.
yup mostly in the Web interface, or we add lines in the Config Files... aka Ini's
did u dino wipe after?
In that case, try ActiveMods= in the gameusersettings.ini
Nitrado people will have to wait till nitrado updates there dashboard to add the option, they wont add it till after they get the patch
nitrado servers will have to wait for nitrado to give u a nice easy check box
Yup Nitrado gets the patch, then confirms it which can be a few minutes to several hours. then Nitrado will upload it to our servers
By then we should see a post somewhere with the command line we need
first ya got to wait the hours till WC releases the patch for us and nitrado lol
lol
I love how they put out patch notes and announcements, then later actually do the release haha
Name Description Build ID Time Updated
asalive 13888866 2 hours ago
public 13865069 3 days ago
nitradopc 13865061 3 days ago
``` only been 2 hours since live got it
they do the patch notes when official gets it
Get us all excited then be all, "just kidding" lol
unofficial is always behind by 30min till never depending on the patch
And then theres the Nitrado delay lol
I host an nitrado server. Do I get the easter colours by itself after dinowipe of do i have to adjust a setting.
Nitrado users may have a line to add in our Ini's
you have to wait for nitrado to add an option, or activate, best to ask in there discord
Ok ty
its unlikely to be an ini option imho
Not really any answers over on the Nitrado Discord yet either hehe just a waiting game
iirc ase it was a setting in the nitrado ui general settings page. thats the only way they allow you command line parameters
they still waiting on the patch so they prob dont have an answer yet
It looks like a launch parameter. Not an ini change.
Does nitrado no longer have a "current official event" thing in the events?
it sort of does, but its for the dynamic config to the rates , afaik
It used to be for the colors and stuff
not sure Bee, dont use nitrado but right now it wont work even if they do, with patch not being out for unofficials yet
The Nitrado web interface changed a lot when asa went live. Still doesn't have many of the config options as it did b4
yea , its changed a bit for asa from what i seen .
That's mildly annoying, the interface was already aggravating compared to how smooth gportals is
still no whitelist even
Maybe it'll get better as more content and time goes by
They have slowly been getting this one in shape... Nitrado speed... lol
thats almost like wishing WC wouldnt wait so long to release patches to unofficials
I've resorted to using Beacon
I mean... I do wish they wouldn't go so long, but I can't do anything about it either so
u can whitelist just involes alot effort/knowledge of how to do it.
nitrado are doing minium effort imo , just raking in the $ as there sole (setup for you server provider)
We could make it a Drinking Game hahaha
none of us can, just sucks when they do event patches then wait hours to give it to a huge part of there player base
Im gonna guess its ActiveEvent=EasterColors to get it working via ini in Nitrado
Nothing for activate évent one nitrado page and i not sure thé game ini code :"ActiveEvent=Easter" IS now working on asa
oh hell no , i drink too much as it is hahaha
Nitrado seems to have adopted the "Soon" trademark from Sony Online back in the SWGalaxies era lol
How do you change launch parameters on nintrado? Are they checkboxes or something?
Just “Easter” confirmed to be the parameter? Or is that the one from the old event that still works?
I think they mean it does not work
English isn't their first language, they were in #ark-survival-ascended a minute ago
you cant, u wait for a nitrado checkbox on the ui, likely a few days knowing how fast nitrado is with this sort thing
Ah ok. Im betting EasterColors does.
I dont know bro
Ew... fair enough.
For Nitrado users were still on 36.25 So have to wait for them to get it, varify it, then upload it to our servers
27 isn't live yet.
Somebody try ActiveEvent=EasterColors after they get the update installed
Only on asalive. Not for unofficial at all
Nitrado users are commonly the last to get it...
The people that pay premium prices for basic hardware hosting? Oof...
right
I will try on one if my map
cant even blame nitrado for most of the delay when WC takes hours to release it to them
prob be cheaper to just rent rack space, im in small town so dont have the bandwidth to host my own yet...
and to think I had 13 servers with Nitrado back with ASE... *Palmface
I mean if the update goes live apparently you still have to wait on them to make it accessible. Not a fan of that lol
Ah yeah I've heard some people have weird ISPs. Like the whole neighborhood is behind a nat. So no access to ports.
yeah Nitrado puts it through their own verification before releasing it to us lol
my local cable is fastest avail currently and yet im at 150 down 9 up lol
1500/750 here lol
Jelly!
Tbh it's total overkill
almost in same boat, i get 300 down and 10 up lmao
Brutal. Shitty IPs essentially forcing you to have limited usability of your own damn network
I mean i run my own servers already. Smarthome and all. just waiting for them to upgrade. same company is Gigabit across the river from me ion arizona lol grrr
thats what i pay for anyway, its normally runs around 350 down and 12 up
lol try 10mb down 0.05 up 😦
Ouch
You live in the woods my guy?

I got a 56k modem to sell ya lol
That's brutal lol I suppose it's better than none
Back on topic pls XD
lol sorry
Did you see the otter skin! AWWWWW
And the saber omg
Hopefully .27 is live soon. Pretty sure it rarely takes them longer than a few hours
If I still played unofficials (anything really), I'd have all the skins.
Massive improvement on the saber lmao. It doesn’t look stupid anymore.
What skin is this?
#announcements TAS skins
The Dear Jane skins
Ahh the ones that look like windwaker skins lmao
Have to check that mod pack out. Is it only skins?
I love them. I need a mod that does a full conversion of the game to this lol.
Been looking at the acro and that guys dino mods. Look cool but idk how balanced they are lol
Its the skins with the notes. The xp is bugged atm so you dont get the boost but the skins are permanent and you get them on transfer/respawn.
You do get them on respawn?
Yep
😮
If you stand there and let Karl Urban finish reading the note (audio) it puts them in your inventory cosmetics tab.
I'm at 20+ mods on server.. I'm not sure how much more I can dump on there lol
As long as they're not crazy overhauls, it's fine
Its tiny, seems to run fine. Im at 23 on 9 maps.
All clustered same node? 😮
you dont want to do it like a mincraft server with 200+ mods lmao
All but one event map
Enterprise hardware im guessing?
its live public 13888883 2 minutes ago
That's good to know I'm still in safe territory. I think the biggest one is one that adds like 4 dinos to ocean
Currently updating ty ty
Nope just a hobby on Nitrado. Ppl like it tho, so we keep the maps going.
For sp or like nondedi, how would you add the event? Or would it just be automatic since it's not like a mod?
might have to add -EasterColors to start parm
not sure though
I'm not very well versed in launch options, but that'd work the same for both wouldn't it?
Thé game ini command dont work just delete all config ...
i would think, but not sure i dont ever play SP
Okie dokie. Thanks for trying 
how to have the event on the server
Nitrado ?
Nitrado users have to wait for Nitrado to update the servers, were still on 36.25
ok, when approximately.?
Its Nitrado, once they receive it from WC, they put it through verification, then they push it to the servers.
So could be half hour, or 4 hours.... very normal lol
Ok thanks bro
You’re more helpful than half these mods 😂😂😭
Yo anyone know how to recode crafting recipes? Looking to change the recipe for cementing paste and nothing I’ve tried worked.
Do you have the code you used to edit the paste?
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemResource_ChitinPaste_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemResource_Stone_C",BaseResourceRequirement=2.0,bCraftingRequireExactResourceType=false)
This for Ark evolved or Ascended?
Ascended
And you put the code in the game.ini correct?
Yeah
It's going to sound silly but, maybe change the "2.0" to just "2"? Your code matches what I use for my server exactly except that part.
Yea far as I can tell nothing is wrong
Got the 36.27 update, don't see an easy option for adding/checking the EasterColors option. I'm going to try putting "ActiveEvent=EasterColors" in the GameUserSettings.ini and go from there
Alright thanks. Is it possible I could get a screenshot of yours just so I know for sure
wait I found error
What’s the error
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemResource_ChitinPaste_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemResource_Stone_C",BaseResourceRequirement=2,bCraftingRequireExactResourceType=False)))
you missed the end brackets
it has to have 3, you had 1
That would make sense. Thanks
ahh yep. That's probably it. But in case it's helpful, here's mine (it's for changing the recipe for poly not CP but you get the idea):
ConfigOverrideItemCraftingCosts=(ItemClassString="PrimalItemResource_Polymer_C",BaseCraftingResourceRequirements=((ResourceItemTypeString="PrimalItemResource_Obsidian_C",BaseResourceRequirement=2,bCraftingRequireExactResourceType=False)))
How are you coding them? are you using beacon?
Na I just looked up some random guy on Reddit 😂💀
Lol
ARK: Survival Ascended: Obsolete. Adding ActiveEvent= in the GameUserSettings.ini file has no effect.
https://ark.wiki.gg/wiki/Server_configuration
Needs to be -EasterColours in launch params. If Nitrado, check their discord.
I would have loved it to be both, so you can share ini between maps and have one thing on in one and off in another.
I like the idea of having a convention of ?<param> for command line and also supports <param> in ini
So i can have faster breeding in lets say Island (where we are done ascending) and slower breeding progress in SE for example
But without having to have seperate server installs, that would have been nice. I think most GameUserSettings ini can do it, but Game.ini mostly cannot go on cmd
Is there a way to make the structure pickup timer infinite on ASA?
It already is by default...
You can pick up any structures in ASA
Mine wasnt set to infinite, hence why i asked, figured it out though
So they're planning to release Scorched Earth as a character-only map. Did they fix being able to set up a character-only map on unofficial?
Because it's been impossible since they enabled transfers unless I'm missing something.
Probs have not even tested it themselves
Can someone please tell me what it means by, unofficial can enable parameters - easter colours? like where the hell do i enter that hahaha
its just another flag in your start up script
The Prevent item and dinos setting for transfers are not working yet as far as i know. Hoping that comes in with or before Scorched earth
It's going to have to by Monday if that's their plan lol
Say I wanted to set up a ark evolved cluster what kind of specs would I need for it. It more than likely would be for just me and a friend.
I had 2x 2.7Ghz Xeons running my cluster...plenty of ram. only map I had issues with on ASE was Gen2....it was a beast to run
it was playable but I got lag occasionally on Gen2
hoping that improves with ASA on Gen2 specifically
My friend and i started a non-dedicated server on the steam version of ASE and my brother wants to play on the server too, so I shared ark with his account and when he tries to join, it says shared accounts are not allowed to join. We looked it up and saw that there was an option in the GameUserSettings.ini file, AllowSharedConnections, that we could set to true but the option isnt there and we tried just addding it to the file but it didnt work. Does anyone know how to help?
Or at least somewhere I could get help
game ini, game user ini?
like where on nitrado do i type this easter event in?
any word with the scorched earth release if we can cluster our servers
its a startup flag, not in ini , so ArkAscendedServer.exe <map_name>[?<option>=<value>]...[?<option>=<value>] -EasterColors
if using Nitrado, best check their discord
If they have place to type flags or set them
fuuuucksake i hate how literally everything in ark is just guessing and word of mouth
like literally why not just post how to activate their event without people having to google 100 things and post in 3 different discords
thanks dude ill get on it
Looks like the community crunch confirms it somewhat You'll only be able to bring your characters over for the first 60 days, you won't be able to bring any dinos or items onto the map
Hope the same settigs work, or atleast they communicate it in the patch notes
Well confirms that that's what would happen in an ideal world, doesn't confirm whether or not they even know thats not a possible scenario yet
Because they suck a bag of rocks
- we fixed a crash * is basically all their patch notes have said for weeks
if anyone else works out how to activate easter on a nitrado server before me please let me know, if i work it out i shall also post it here
They announced "how to" in the patch notes, if you self host, it's a simple option to enable.
Nitrado should have their bases covered. It's all on them.
Its been a few times now where Nitrado is not ready to support new config\flags
They should know people will want to set command line flags and should provide a dynamic interface for it. Sounds like incompetent server hosting service
I mean, WC released the last 3 events as mods so this hasn't been a problem, on ASE events were a dropdown list. In the patch notes they just said, enter it into your parameters, with 0 context and also have not had to do anything like this on nitrado before for any other event, so it just seems fucking dumb to have to do something new every time theres a new event
i'm assuming nitrado will just have to add something new to their interface to keep up with WC's fickle ways
Nitrado could solve it completely by just having a smarter inteface. Having a section called "custom" where people can set key\value pairs and have simple validation, would solve this
Ark has many flags and server hosts should support it
Yeah 100% nitrado are just as bad, but holy shit WC could give a little support to players that are using the server host they gave exclusive rights to
yeah true, they could give a little more support to their hosting partners to ensure interfaces can handle these things
It's not a Nitrado thing that's stopping the character-only transfers from happening. The custom cosmetic tool in the inventory is counting as an "item" and blocking the character-only transfer. That's a WC bug, not a Nitrado bug.
gave, funny way of saying nitrado bought the rights too
the transfer thing has always either been a bug \ or just not implemented properly yet. It's never been a Nitrado thing
If I purchase a pen from you, you still gotta give me the pen before I have it right
another prob is Nitrado hasnt updated the servers to .27 yet
They're probably scattering to find an available developer over easter weekend to update the UI to add a new checkbox 🤣
Before they just gave us a line to add to the GUS lol. but even thats useless if we dont have the actual patch uploaded. lol
How do I enable the easter colors?
Nitrado? they havent even uploaded the patch to our servers yet...
so how do you add the colors to a self hosted server? is it posible i can get an explanation as if i was a 5 year old?
I haven't tested but it looks like a launch parameter in your starting bat file
meanwhile my nitrado server has been in an update/restart loop all day lol
ouch...
and its like a deathtrap of incorrect clicks to actually be able to make a ticket for it
like no.. I don't want to have to take a coding 101 course to fix an issue with your server
Like that other guy said... selfhost ftw.
cries in not enough hardware to self host
Tbh as long as you're not super ambitions and want to cluster multiple maps at once a cheap refurbished dell optiplex or similar is plenty. 4 cores and 16gb ram is the min.
One of my servers is on a 4670k. That's a very old i5 lol
The more expensive one I got a 500 dollar mini pc with a laptop ryzen 7. So 8 core 16 thread and capable of 256gb ram without pulling more than 55 watts
yeah I suppose a cheap oldish PC and a spliter to easly switch between them on a monitor would work
I just never really though about it as I already have 2 PCs on one desk
That's why I went micro pc
1 strictly work related
I was looking at old cheap server racks... no idea where I was gonna fit that lol
The mini pc is a bit bigger than an external drive
my old work place had those
they basically fit in a bracket on the back of the monitor
Exactly. Can be Vesa mounted so not even take up desk space
yeah cuz.. its already a wreck here
Imo there an awesome solution
Slightly more pricey but the QoL of not having a server rack sound like a jet engine take off or constantly draw 700 watts is nice and will help in the long run lol
Or maybe I just need to splurge and get myself a really nice upgrade and use this one to host 🤩
one can dream
Currently running a server through Nitrado with mods. For a few months, my supply drops have been despawning when any item is taken from them with 3 or less items remaining inside. Any idea why they’re disappearing early suddenly?
hmmm interesting, disable Gsync and force stable refresh rate fix light shimmering in game O.o
As for character transfer from server to server, there was an issue to enable transfer without dino and item upload, so basically only have the option to travel naked. I've seen, officials are blocked for dion and item upload for 2 Months, when SE rolls out. Is this Bug fixed now?
Dear lord, lets hope for the best ^^
Thanks much for your answer, @polar echo
Is this why I can't download a dino anymore on my ASE PVE map ?
All my settings are correct, also nothing has changed but I can't download a dino anymore on ASE PVE. I shall file a bug report.
only affects ASA
Yes it could be many factor, even file permissions on the OS that could change etc
Something definitely changed 😉
haha i just activated transfers completely on my server, and my character got stuck downloading onto svart, then vanished. tried making a new one on svart and downloading to island, also got stuck and vanished, just lost my main 🙂
even did a 30 min rollback. nada.
cant wait for SE woo
If you have your maps cluster together with the cluster id make sure no boxes are check in restrictions @pallid kestrel
This was happening with everyone when they first enable transfer we all had the one check off disable downloading player information. If you are cluster outside servers can't join. So make sure all boxes are uncheck
Plan on clustering and keeping the settings close to Official for transfers. so what would be the settings be to allow character transfer but not items?
if it worked / works on s.e release
PreventDownloadDinos=True
PreventDownloadItems=True
How do you GiveExplorerNote to a specific player?
We have a player who is bugged where they lost a lot of explorer notes on their survivor.
only command I see gives it to yourself. cheat GiveAllExplorerNotes
The only character transfer thing for Scorched is that only offiicial or unofficial aswell? Tia
Typically it's only official that is locked to 60 days. Unofficials have their own rules.
Cool thank you 🙂
Sooo, everytime I try to update my server it says it updates, but then tries to download the SAME update when I test to see if there's any new ones. And it won't show up on the unofficial lists. Are the new updates busted or something?
We had the same issue a few weeks ago we ended up having a do at Nitrado because it was a problem on their end
small question eggcelent event is not a mod?
Hey, is there a way I can limit my server on how many creatures/items we can upload to the Obelisk for when we move per player?
look to see if its on v36.27
it is not, its not really an event either, just easter colours
the defauts are these in gus ini
MaxTributeDinos=20
MaxTributeItems=50
you can change them , but it it is only for each transfer so smart players will just go backward an forward between the two maps to get more stuff over , just takes them bit longer an more travelling
I just noticed a new setting I haven't seen before in Nitrado. Does anyone know if disabling this allows a character-only setup to work?
Oops just realized I can't send the screenshot here. It's the Disable Custom Cosmetic System button.
Test it and let us know if it works 😉
I just may
Id test but my test map is occupied atm
All it does it prevent players from creating their own cosmetics
The button in the inventory was believed to be the cause of blocking someone from transferring to a character-only server. Wondering if disabling it removes the button and allows the transfer
As is mine lol
hello
I have a problem, I don't understand why when players use travel between maps, they lose their character. Once they disconnect and reconnect, the window for character creation pops up. I don't see what the error could be, I think I have the configuration right.
I can't send photos to show it F
is eggcelent adventure gonna be a mod? and if it is, what is the mod number?
Look at the patch notes...how you activate Easter is in those. If you use nitrado, you need to contact their support and get them to add that as an option to their interface.
In our server we are looking to have a limited amount of upload/download slots when we move maps. Is there a way to decrease the original set limit?
We need to ask them to do it 🤣 Nitrado are lazy
Yup...which is why I don't deal with them anymore
Madness 🤣 ask them to ask me do I want the event 🤣
With scorched coming I seen on a tiktok that character only transfers for the first 60 days is that on official only ?
"To keep things fair and fiery during those first few weeks, Scorched Earth will be a bit of a wild frontier. You'll only be able to bring your characters over for the first 60 days, you won't be able to bring any dinos or items onto the map. After the first 60 days, the gates swing wide open!"
Does this apply to unofficial servers ??
Yeah official only...up to private sever admins to set their own rules. Still unsure if the game will be fixed when they drop scorched so that we can lock them down if we want.
nice 🙂
No
60 days was pretty standard all thru ASE for new map releases.
Its to be expected on Official.
the defauts are these in gus ini
MaxTributeDinos=20
MaxTributeItems=50
you can change them , but it it is only for each transfer so smart players will just go backward an forward between the two maps to get more stuff over , just takes them bit longer an more travelling
Haha we have it set to where once they've all uploaded their items and characters we turn the uploads off and same for downloads once they've all moved over. Thank you though for this answer!
Hello survivers, I would like to switch on the character transfer on April 1st without items and dinosaurs. but how can you travel without costume skins?
I can't throw them out
atm you cant , we are all hoping they fix it before s.e releases
In Nitrado, there is a checkbox for "Disable Custom Cosmetic System" on the General Settings page. I'm guessing thats how its done, but this is untested atm. I do not know if there is an ini for this yet.
probably only works with the server parameter -DisableCustomCosmetics
people tested that before, it doesnt help, the issue is a game fault the devs are aware of,
it thinks u have cosmetics when u dont
typical for wildcard
yep
Quick question about steam advanced launch settings: is it possible to use more than one? Or do they cancel each other out?
Because I noticed that in -eastercolors not doing anything, -preventhibernation stopped functioning, when it had been working fine before.
Is the custom map name for Svartalheim just that or am I missing something
shud be fine if the have a space between them , i.e,
-preventhibernation -eastercolors
going off memory,
Svartalfheim_WP
That's what I did. preventhibernation stopped working.
I know because the timer on an adol yuty I have is frozen
oh thats shit, i dunno then sry. im not familar with single player tbh
I need help with tek dedi storage it won't let me and the server put in resources in it only structures
mods can be large, and console disk I/O is probably not great either so its a formula for slowness
I have a problem, I don't understand why when players use travel between maps, they lose their character. Once they disconnect and reconnect, the window for character creation pops up. I don't see what the error could be, I think I have the configuration right.
I'm gonna ask again maybe i'm gonna find the answer even tho i've tried everything, but does anyone know why i can't make it so my singleplayer world blocks building at caves and obs like on officials ? it's just not working. On ASE it works perfectly fine but not asa
Does singleplayer have the option to enable extra structure prevention? Pretty sure thats the setting unofficials use
Extra structure prevention onlys blocks rich areas like mountains
Is this between Island and Svartalfheim by any chance ? I have seen many reports of this between these two maps. I feel like ASA introduced code in the Island which dont work well with modded maps
yesss, but I know servers that are doing very well and that this does not happen to them
Don't you know any solution??
unfortunately i dont. I am not sure if the .profile files in the cluster folder has the same schema as in the Saved folder. So not entirely sure if you can just take a .profile for a acount from a backup , and just paste it into the Saved folder with the server stopped and see if you start it if the character gets restored
I don't know how I can solve it. I tried it by removing all the mods and removing all the plugins, I also checked all the files to see if they are in the right folders, and they still lose the character
My understanding is when a char xfers their arkprofile data gets copied to the cluster folder and onto the other maps saved folder
if you backup these regularly you could try restore those profiles manually , but unsure if it would work
The data is exact, but the character is not, when entering the game
this is a headache
I can imagine. All i would suggest is if you can, have scheduled cronjob \ task that takes regular zip backups of your Saved and cluster folder every few hours. I got mine set to every 3 hours and it uploads to cloud
If you get into this situation, you can take a backup of each 3 folders, then try unzip a backup to a temp folder and then just remove the problematic character profile file out from the server in all 3 folders and place it back from a backup if that makes sense
Ive restored someone character in ASE before using this method
Do you have the 2 maps too?
anyone know how to check rates on unoffical servers without joining them. like with a discord bot and ip or something to that effect. was looking for a way to have server rates update when changed and such however i am not admin on the server i play.
Not at the moment, i have done some testing on basic ASA clustering in preparation for SE to make sure it works and just tested it between 2 island maps.
I am avoiding modded maps and xfering for now until at least SE is out for a few months. The devs will start patching all these xfer issues hopefully as more xfer bugs may surface. Xfer traffic will increase and highlight more attention to it i hope
What seems very strange to me is that there are servers with both maps and they are doing perfectly, they have not had problems with character loss...
Ive seen many reports here of character loss between Island and Svart.
Someone here has narrowed it down to Island -> Svart = FINE, but from Svart -> Island causes character loss most of the time
On a test server I put 2 The Island maps and when I transfer from The Island to the other The Island map the same problem occurs
interesting, what setting are you using. In my test I used -clusterid as a flag, and ClusterDirOverride
Nothing else. All those transfer filtering and prevent settings I excluded as Ive heard they give issues
This is my experience as well.
so, no easater eggs?
Dodo bunny and oviraptor bunny?
Me and a friend wanna setup a pvp server and we want there to be a way of farming Element rather than doing bosses since small tribes won't really be able to run bosses for ele, so is there a way to do custom Element farm? Perhaps Element crystals like on gen2?
do i need to own ark on pc in order to host? i have the asa dedicated server running, but it "full starts" very fast (not very educated on it)
Asa
No
okay was just a bit confused cuz it wasnt popping up in the server list either
hasnt changed at all
4.5gb with discord & google open aswell
268 mb
i can send you the video im using via dms if you would like to help
oh ok im not rlly fully awake rn trying to do all of this 😂
sent you it in dms
oh okay, should i remove it then or does it not matter
changed it and now ram usage is way higher so i think its doing something now haha
yeah my pc can handle it just fine, but now the server wont show up on server list, no more "booting..." at the top either
i port forwarded 7777 7778 udp and 27015 tcp
still nothing
sounds good
its good now, but now im assuming i messed something up on port forwarding since my friends cant join but i can
yeah everythings good now, thank you so much for your help
wait nvm lol now its giving them connection timed out anytime they try to join
Giving this another shot
I play on an unofficial server a lately the trees that i have right next to my hosue keep disappearing while im offline. My structure are too close to them but noone is knockign them down.
Hey ya'll whats happenin? I'm trying to come back after like 5 years and start all over but I fear I may have to reinstall and jump through some hoops. Also I basically forgot everything I knew 💩
If anyone feels extremely patient in helping me get back in to the game shoot me a dm. ❤️
Oh I see the problem... it wants 66gigs of space to update and it will make my computer start on fire (not enough disk space) sadness 😦
I can't install the updates needed to even play the game
Has anyone tested that ini command to make the Clear Glass Mod work on a PvP server
oh I saw setup help and assumed it was for that. Which channel would be best for that?
Do we just put -eastercolours
In the ini? Or is there something else we need to do? The explained like we all knew what was going on
- is command line flags , goes in the startup command. You have ? options , then space, then - flags like -mods=123,124 so you put it behind that , just make sure there is a space between each flag, for example : -mods=123 -EasterColors
The wiki describes options and flags in the startup command well
https://ark.wiki.gg/wiki/Server_configuration#Command_line
🫠
Bugger
Go to #bobs-with-probs for basic game help
This channel is for server hosting setup help.
depends on the server owner
its a setting the owner can decide to allow full transfers or not, some may not even have clusters, others might want people to start fresh . the owner decides
yea
ok ty
Has anyone faced the issue that you cant travel to another server because you have items in youre inventory? My inventory is completly empty including cosmetics but it says i have items there, i tried to mindwipe, killmyself, nothing fixed it
@rugged wedge yes, transfers do not work unless they are fully open right now
Can anyone help with instructions for turning on Easter colors, where to put the parameter at on nitrado?
Gotcha. Thank you
i wont dm but ,simple method , get ark beacon app. you can adjust all the settings in it an get them set perfect for your needs. the free version does this
Could i not get ignored please
the only thing shared with ASE is the dlc. gotta buy the base game for each pc
-Eastercolors in game ini or usersettings on nitrado
Has this worked for you?
Is there a place the custom cosmetics can be disabled on nitrado servers?
I play on a server that has items transfer disabled between maps. But the only "item" I have is the custom cosmetics. Others who do not have custom cosmetics because I assume their character hasnt died seem to be able to transfer.
No I’m asking my bad I’ve tried both and don’t seem to work
They spawn on your character it’s a skin not item
I've disabled default survivor items. But they still show as being there.
-DisableCustomCosmetics that launch option disables it, haven't used it tho 
Does that go in game.ini or gameuser.ini files?
its a commandline
does nitrado not have a spot for those?
I'm not sure what the difference is tbh. The server I'm on is hosted through nitrado.
Is that an admin command?
No, its a different spot then game.ini or gameusersettings.ini. haven't used nitrado so no idea where it is 🤷
You sure about that?
Transfer work fine with everything enabled, they only dont work if i disable item transfers
Hello everyone, I currently have a server with Nitrado and it's working very well, but I have an issue with dino spawns in caves...especially underwater. The population of megalodons is HUGE and I don't know what to do to change it...yet I haven't touched the dino spawn settings. Could someone help me?
That is the issue we have, we want people to only be able to transfer characters, no items/dinos.
Yeah same but it wont work, always get the message that we have items in our inventory
I wonder if official will run into the same issue. Maybe a hot patch after SE drops will get it fixed 😑
Yeah because if not i have to enable item transfers and the map is completed for most people in 1 week
That's what our server owner wants to avoid also. Just a new an unique asa issue I guess.
Yeah
Thats not the problem we can share it we just cant find the setting that allows you to join on a shared acount also we share a pc
I just told you. As I had this same issue. Don't argue as I had experienced this firsthand. That is the problem. I know you can play it as shared. But to both join each user needs to own the base game
1 - transfers are broken atm, we can only hope they fix them on scortched release , the devs know its an issue
its an issue with custom cosmetic they know about ....
they work sort of fully open, not if u try to disable item downloads
We ever get news on how the dlc is going to work on unofficials with se?
is there a way to gets mods in the game without downloading through the actual game? it keeps bugging out on my on every mod install and just restarts?
bonjour y a t il un francais qui sais faire un cluster et qui serai me dire comment faire ? merci
Have you folks got the new Easter color Dinos to spawn yet on your unofficial servers? Not Niteado.
the bright pink brachi next to my base says yes
Anyone knows how to Activate the event eggcelent in host solo? ASA
thats what i meant
guys how do i enable xmp on my pc, i have a 4060 ti and a 13th Gen Intel(R) Core(TM) i5-13400F and i get from 30-50 fps on low settings, im so lost
any news about scorched?
Tomorrow, same as it has been since Friday.
sounds aboot right for a 8gb ti .
use the in came commands to turn clouds an fog off.
r.volumetriccloud 0
r.volumetricfog 0
i also use grass.sizescale 0.5 but tht a personal prefenabce an dont do much for fps .
ignore the fps an make the game run smooth, just dont even worry about the fps. dont display it . play the game an see if it smooth
no news about release time?
No. News will not be posted in the setup help channel, it will be in #announcements or at the very least, pinned in #general if there are hiccups.
Why ppl keep asking this in the setup channel? The heck.
Any news on when tomorrow they will deploy the SE?
becuase channel has word help , is my only guess
the discord is a lil confusing an discombulated like ark for new people,
this channel is more for server and mod help , there are channel descriptions somewhere, i never rem how find them tbh.
#bobs-with-probs is the channel youre looking for
does anyone know if on windows ASE servers you can change the timer of summoning extinction titans?
i mean how often i can summon them so i can tame, since im pretty sure it's standard is like every 6 hours
so cant be done on windows ASE?
cheat gfi primalitemcostume_AAA_rex 1 0 0
is there issues with mods auto downloading? on the server of course
sa the auto managed mods stopped working for some odd reason
thanx for response
i know i dont post here much no more been hosting ark since 2015 theres somthing on n.american right now whereas europeon steam servers maybe working, but i suspect between your posts you never tried deleting a mod to test before your response.
all good ill let it sit awhile longer and relaunch it. nothing changed since last restart and nothing in the logs.. just a simple bit of bs after updating the server/restart.. carry on 🙂
anyone having issues getting the cosmetics feature to work on pc?
This is for server setup help, the cosmetics mods not working is not a server setup issue. It is happening on officials.
Well i'm wondering if it needs to be activated as a mod server side as well as on an individual player basis
Both iirc.
cool ill give that a shot, tyvm
Hello, this command extends the time before dinos respawn. Is there a command that does the same for structures? PvEStructureDecayDestructionPeriod=1 (Even though it says "structure" in it, it doesn't affect structures)
It doesn't do anything because that config no longer has a use. There is no config to make dinos respawn after a certain interval.
The command doesn't make dinos respawn; it increases the time before they can be claimed by other players, for example, from 7 days to 30 days.
That is completely separate from what you were saying.
DisableDinoDecayPvE=False
As far as I know, as long as you do not enable autodecay, the creatures will just stay in the world for however long they survive until someone claims them.
Hello boys i have a private server with friends. i need help for clamp armor saddle ecc. now i have overpower stat for armor, saddle ecc i want the vanilla stat. like ascendent saddle 124 armor ecc can you help me? ini setting
@chilly moss ^ Will has it here.
Thank you for the information, however, I have an issue with the transfer; regardless of what happens, there's a 24-hour delay to retrieve anything I've uploaded. Is there a way to reset this delay to zero as on Evolved?
THANKS A LOOT
The only thing I see in the wiki with a timer for downloads is
MinimumDinoReuploadInterval
Thank you alot for your time, have a nice day!
Check here, I may have missed it
This page discusses the extensive collection of behaviour and gameplay aspect-altering configuration settings of ARK: Survival Ascended and ARK: Survival Evolved servers and Single Player/Non-Dedicated sessions.
Options can be specified on the command line when launching the server, or in...
Hello Another question for my Ark Server
I Have now this setting for BABYS DINOS
Mating Interval Multiplier: 0.01
Speed multiplier for the hatching of eggs: 20
Baby Mature Speed Multiplier: 42
Baby Cuddle Interval Multiplier: 0.03
Baby Cuddle Grace Period Multiplier: 1
Baby Cuddle Lose Imprint Quality Speed Multiplier: 1
Baby Imprint Amount Multiplier: 3
Baby Imprinting Stat Scale Multiplier: 1
Baby Food Consumption Speed Multiplier: 1
It good but its fast, like Rex 10min Mating, 15min Eggs, 1h Adult, 4 imprint 10min each. I want to go maybe 1h Mating, 3h Eggs, 8h Adult, 5-6 imprint 1h each.
Someone can help me? its really hard and sensibile this setting.
THANKS 🙂
Sorry if i came off as rude thats not what i meant. But like has that option been removed or what cause idk why it just wouldnt be in the file whether or not it works
how do you turn off auto learn engrams on asa?
my torch and pickaxe blueprint show up twice
I don't recall this even being on in ASA by default. Should by default have to learn using points
Hey guys do you have a bug with the cave tek door being locked with players inside?
Having some INI related issues that I can’t figure out. Can anyone take a look at my files and see if they can figure out the issue? Supply drop related
BabyMatureSpeedMultiplier=11.6
BabyCuddleIntervalMultiplier=0.12
BabyImprintAmountMultiplier=1.4
EggHatchSpeedMultiplier=1.66
MatingIntervalMultiplier=0.03
this is pretty close to what you want, i used beacon ark app to do it , the free version allows you to adjust each setting an see the effect it will have ,
just beware after changing ini it will only effect new babies and eggs in the world .
check to see if you have this line in game.ini
bAutoUnlockAllEngrams=True
change it to False to turn off auto engram unlocks or just delete the line
Thanks!!!
if you copy them an paste into a notepad file , save as .txt format
dm them to me and i can look.
the only one i know messes up supply drops is something like
buserandomsupplycratepoints=true
anyone having problems getting the easter update to work?
Im trying to prevent item download for the new map on my server, but even without items im getting the error that I have to drop my items first when I try to transfer. Is this a known bug? Yes, my toolbar is also empty.
I believe you can host servers under linux using proton
Yes known but, can only transfer if everything is allowed, Dino's and items
That is presumably gonna be fixed before SE drops (lol)
I hope so xD But they will run in same issues so they probably fixed it 🙂
It's been broken since they activated transfers in general, so I don't have high hopes. All my players just made new characters on Svart
where are you trying to enable it? Nitrado, dedicated or non-dedicated?
It appears to be that the custom skins (that you can't drop) in your cosmetics tab are counted as items. Hopefully they fix it for the SE release, lot of unofficial server owners wanting to lock down transfers.
Got a feeling it would be that yea
Deear All, Can anyone help me install the official Clean Glass Wall (Sample) mod on my server
its a custom cosmetic which means you just need to allow it to use it. if you have your server in PvE mode then it should work by default (I think)
otherwise you need to use the CosmeticWhitelistOverride=URL setting in gameusersettings (will need to add it) to allow it.
I suggest if its a private server just allow them all by leaving the URL empty.
What are the risks to setup up a cros ark with the new map ? First time for me doing something like this. Any tips ?
Asking just to avoid future problems, but what temps should CPU (or any other parts in a server computer) stay at after continious use? (Or what temps should I look out for before worrying that it will continue to rise due to overheating?)
Over the course of a week it started at a steady 30c and max showed 60c, but now it has risen to 40-49 average to almost 70max. Is this a trend that will continue? A sign of bad circulation? Is there a way to predict how much strain each server will add to the computer when run in the cluster? Since this is just with 2 servers in the cluster running continiously.
That all depends on the CPU, they all have a different max temp
It is more a question of what does other server owners computers do. Starting at 30 and continuing to 50 over the course of a week and does it continue? Or do they experience it stabilizes at some point because I am aware that me having built a completely new rig and starting it up with the server for the first time and having 30 degrees in the beginning and it rising a bit is fine. But over the course of a week almost going up 20 degrees average temp only running the server seems like a noticable increase. Just wondering where other peoples computers average out. I know that the ryzen 5 5700g has some way to go before it maxes out but I would rather spot an issue before feeling it.
All depends on CPU, and room temps the 5700g has a tdp of around 65w with a max temp around 95c, my CPU had a tdp of 115w and max case temp at heat sync of 80c. Mine is at running at 45c right now with it being 18c in the room it's in, it is only using 11% of the CPU right now
My desktop can rase 20c no problem when gaming
Hello guyz, does anyone here have issue since yesterday to place modded building part ? Such as AA, Rustic, RR etc ?
Alright, thanks! I will keep an eye on it if something happens but sitting around 45 is normal then I hope that when temps increase it won't run away because when summer hits it really goes ham on my glass balcony, baking my apartment since we have no AC but my gaming rig never really struggled but it has more fans so I am initally just worried about that temp rising uncontrolled.
Does anyone know a good page to help with setting up a cluster with ark ascended server manager? I'd like to cluster in SE when it releases
Not sure if there is any guides out yet, only ones that have done ASA clusters so far are ones that clustered the mod map with the island
And everything I've seen in here clusters are kind of broken/janky
does anyone know what the syntax will be for the Scorched Earth bat file? eg "TheIsland_WP?" for The Island...
probably scorched_wp
dont quote me though lolz, also in your example, the ? isnt needed, thats the start of a new command line , ie
?password=xxxx
You think it will be a mod? God I hope not
yeah sorry.. lol just cut and paste 😄
please no... I want a fresh install lol
Yeah really hoping its done right.
all good was just making sure u was aware 🙂
yea here is to hoping, if they mess it up . its not gonna go down well
to be fair... there's already a lot of pressure on them to get this right.. disappointing as it might be for it not to go well, time is all they need to sort it 🙂
we just have to be better at being patient lol
I hoping for the same a tutorial for clusters 🙂
My hopes of it going well are not high WC don't have a good track record with updates
mine either lolz i expect the worst , good thing about bad internet, i wont get it for a few days lmao
My hopes of unofficials getting it today are not high either
in the pinned messages 4th down is a link to a sort of guide on how do it, depends how u have the servers setup ,
there usually pretty good with major updates tbh , but we shall see lmao
Normally but if it has major issues on officials they won't send it to us
true
not a bad thing lmao
We don't know if they fixed costume skins being an item yet so we don't know how it's going to go
I added the line CosmeticWhitelistOverride= , leaving it empty but it doesn't start
do it as CosmeticWhitelistOverride="url"
yeah, sorry explained that wrong
hello guys. there are a ini setting for NOT fresing dinos? when we are offline she not mating and farming alone like official.
you would have to use this as a launch parmeter ,
-PreventHibernation
nvm that wont work either as it wont be running when u close game
farming (assuming you mean dino passive farming like doed or anky) will only happen when rendered no matter what.
mating I believe can only happen when rendered unless the dino is set to wander instead of mating but then they walk around.
yea ure right 100%, we used work around it by penning the dinos in an leaving on wander lolz, only works on a server though ..
game.ini? or user?
sry it wont work for non dedicated only on a server, and its a startup command not ini
thats because of hibernation, that launch option should work.
steam can use launch options for non-dedi and singleplayer.
it will still freeze the world when game is closed though right ?
i have a nitrado server. so i need a mod for NO-HIBERNATION?
yeah, because the game isn't running lol.
but what I mean is if you leave your base with prevent hibernation wandering dinos should still mate 
might be wrong tho, Singleplayer works weird.
servers do not use hibernation.
I'm not actually sure if ASA has hibernation
or that option tho.
wiki just shows a ? for ASA
either way, servers don't need to worry about it just singleplayer/non-dedi. but it won't fix everything
im test it on my server. they produce Eggs only if a player is online in the server. and Farm only if player is near to the Dinos
sounds right
yep. but i want the produce also offline so like i go sleep tomorrow i have a Oviraptor full Eggs
wander may work but you might still need to be online don't know
hibernation won't do anything since servers don't use that system.
mhhh.oks
Theyre talking single player
Anyone know how to cluster two servers using Beacon?
Single player you're never going to get eggs offline as the game isn't functioning in any capacity
Beacon doesn't handle crossark IDs, that's direct on your host
So, I don't have to link the two together on Beacon, just on Nitrado
Correct. Beacon just makes inis. It doesn't care about your servers lol (not meant to be rude, just factual)
I just wasn't sure if there were some steps in Beacon I have to do as well since I pretty much do everything there.. (restarts, updates, add mods.. etc.)
Nope, you're good to go! Beacon handles almost everything but map selection and clustering it does not.
Appreciate the info. New to hosting and still learning.
beacon is your friend, it handles 99% of the ini config, i love it
Indeed. I just learned how to fix spawn points that are broken (Like the West Water Cave) and allow it to be somewhat normal.
I believe you and I were looking for a solution to that cave a few weeks ago.
how did you do if dont mind me ask? fully recode it or ? i havent got around to testing it yet but was just going to overwite with ase spawn code for that cavei
My server crashed and now when I start it once started it gives me that.
[2024.04.01-17.03.42:324][ 14]LogMemory: Platform Memory Stats for WindowsServer
[2024.04.01-17.03.42:324][ 14]LogMemory: Process Physical Memory: 16078.43 MB used, 16106.33 MB peak
[2024.04.01-17.03.42:325][ 14]LogMemory: Process Virtual Memory: 21643.73 MB used, 21675.04 MB peak
[2024.04.01-17.03.42:326][ 14]LogMemory: Physical Memory: 27444.19 MB used, 234606.16 MB free, 262050.34 MB total
[2024.04.01-17.03.42:326][ 14]LogMemory: Virtual Memory: 65922.32 MB used, 235040.03 MB free, 300962.34 MB total
I just went into the spawn section of Beacon and there should be an option to create "New Point", select that. From there a new window will open to replace, add, or remove spawns.
I selected "replace". Then it should list all the creatures that spawn in the West water cave. From there, I added in other water creatures (Jellyfish, Eel, Piranha, Manta.. etc. to share the same spawns with the Megs so there's less megs.
I definitely don't have eggs laid when my server is empty. Farm keeps producing and is collected by farmer. Wonder if that's setting related.
in ase , with splus , use splus hitching post , connect dinos to it, then set them on wander for them to mate when u off line
combine it with dino storage v2 ,newborn auto trap set an you have easy breeding
@distant hearth I had to play around with what felt more natural and balanced for that cave. So, you might have to restart your server several times until you feel it's about where it should be as far as difficulty.
yea usually that sthe case when i edit spawns lolz, i once had like 2k snow owls spawning in ragnarock death snow, fun times hahahaha
Yeah, first time going into the West Underwater Cave and getting jumped by what felt was around 500+ megs wasn't fun. Needless to say, what I took in there didn't make it out.
when will this new map come out?
sometime today
Soon TM
so when i play ark i like getting tons of resources for harvesting, i went into the GameUserSettings.INI or survival ascended, changed HarvestAmountMultiplier to =10 but still get little ammounts, any ideas as to why?
ASA rates seem to be different then ASE rates. gonna have to mess with them to get where you want. 
close game, make the change, save it, restart game, shud take effect, make sure you arent duplicating a line
also make sure you didn't have SP settings on
what is SP settings
it boosts a bunch of settings, if you had that on during ASE then it'll feel very different in ASA without it on.
where do i find it?
but anyways my main issue is that it didnt change at all, one harvest from bushes still give me roughly 2 betteries, when id like aroun 10-15
Singleplayer settings is the last setting, in rules, under game rules for ASA.
that'd be optimized harvest amount I think.
I think thats in ini somewhere, I don't see it in the SP menu anyway.
dont see it in the ini
if you think thats the setting then wh at is HarvestAmountMultiplier?
make sure that the "harvest yield multiplier" changed in the menu.
that is the correct setting, the optmized harvest changes the health so it takes longer to harvest but it doesn't change the rates.
makes it so you won't notice the harvest multiplier as much, helps with lag too 
nah the health isnt the issue, just the fact that im not getting any more than if harvestammount is equal to 1
make sure the setting changed in the menu. its harvest yield multiplier there.
ill launch now, what is that under?
and if it didnt? how would you suggest i solved that issue
game rules then world.
try changing it there.
harvest yeild multiplier is on 10
go in the game and grab some rock pickups
should be working
i will set harvest ammount to 100 see what that does
does the 60 day period for downloading dinos include unofficial servers?
same thing if i set it to 100
still getting 2-6 berries per E
then its the health doing it. look around for a optimized health or harvest setting in the ini
how would that effect the ammount gained per collection