#installation-archived

74689 messages · Page 88 of 75

high token
#

ha core update --version=2022.5.x

#

don't remember which version is latest

vale sluice
#

Yeah, i thought about cloudflare too, do you have an tutorial on youtube or so?

humble mirage
#

I'm sure there's loads of YouTube videos that'll guide you through it

#

Personally I've never seen the attraction when it's text config

vale sluice
#

i can only find tutorials about dynamic ips

humble mirage
#

If it doesn't 100% match your setup, it shouldn't be hard to translate/find another guide

vale sluice
#

the thing is, how will i put in the commands in home assistant?

humble mirage
#

I don't know if somebody's done one for Cloudflare

#

Then again, I don't use HAOS

vale sluice
humble mirage
vale sluice
humble mirage
#

VPN to the Oracle cloud host, running a proxy server

#

You did read the link I posted?

#

No... didn't think so

vale sluice
#

sorry, ive already setup tailscale vpn

humble mirage
#

Do please read the article

warm crypt
#

@humble mirage I have cloned the SD now, it is starting up however it is giving out this error: Error returned from supervisor: system is not ready with state startup

vale sluice
#

k, thanks

humble mirage
#

I already said don't do that

humble mirage
warm crypt
#

Sorry. I guess reinstall it is...

humble mirage
#

That's what backups are for... at least as long as you weren't leaving them on the SD card

warm crypt
#

👀

bitter locust
high token
#

not with the x right? 😛

bitter locust
#

Nope 2022.5.5

high token
#

and finished successfully then

vale sluice
bitter locust
#

Yes goes very quick and saying "command completed successfully

high token
#

ha su logs

terse orchid
#

I got the same thing

humble mirage
bitter locust
#

Can't execute update while a task is in progress. That's what the log says

humble mirage
bitter locust
#

Guess I need to stop the core first

terse orchid
#

@bitter locust Are you able to stop it? I am not

bitter locust
#

No cannot stop the core either

#

It's because the task is core is starting

bitter locust
terse orchid
#

Still stuck in the same loop

bitter locust
#

We need to try to downgrade but the command does not work

terse orchid
#

Is there a way to block core from automatically starting on power up?

bitter locust
#

It fully starts but just keeps crashing and starting again

bitter locust
#

Well still stuck on 2022.6.0

terse orchid
#

Yeah. I am having no luck as well.

#

I was able to pull a backup and off of the SD card and restore it in a VM so atleast I haven't lost anyhting.

grave zealot
#

Hey, I'm setting up HAOS on a RPi3, but I'm stuck on the preparing part of the web UI. It seems to be running in a loop of not being able to find an image:

22-05-26 18:47:08 ERROR (SyncWorker_2) [supervisor.docker.interface] Can't install ghcr.io/home-assistant/raspberrypi3-64-homeassistant:2022.5.5: 404 Client Error for http+docker://localhost/v1.41/images/ghcr.io/home-assistant/raspberrypi3-64-homeassistant:2022.5.5/json: Not Found ("no such image: ghcr.io/home-assistant/raspberrypi3-64-homeassistant:2022.5.5: No such image: ghcr.io/home-assistant/raspberrypi3-64-homeassistant:2022.5.5")

crude inlet
#

@grave zealot you'll probably want to change DNS servers on your router or on the Pi directly

grave zealot
crude inlet
#

it's pulling the image down, but failing to in your case

#

so there is no such image for it to run

#

This can also be because of lack of space, but on a new install this is not likely

grave zealot
#

I'm confused. It's pulling it down but failing to?

#

You mean it's trying to pull it down?

crude inlet
#

yes

grave zealot
#

Do you know what the URL it's trying to pull is? Surely if it works on my computer then that rules out DNS?

grand pivot
#

Could be misconfigured ipv6 on your network, and disabling it at your router may help

grave zealot
#

IPv6 is disabled

vale sluice
#

@humble mirage ok nm, i cant use cloudflare cause it requires a payment method

#

Do you know any other sites with the tunneling method

crude inlet
#

@grave zealot I've seen issues with 1.1.1.1 Switching to 9.9.9.9 as a test would also be an easy check. I don't know why cf has issues for some

grave zealot
#

have just tried the universal troubleshooting step (power cycling) first but will try switching DNS after that

hallow onyx
#

anyone knows how to setup mosquitto SSL in HA?\

high token
#

@bitter locust same for you

bitter locust
#

cogneato managed to get us sorted out

high token
#

Ah I missed that

bitter locust
#

now on 2022.5.5 again and it's stable as before. I'll stay away from the beta for now

high token
#

There is a memory leak so it could be because of this

#

and Rpi3b has the least amount of memory

#

good time to make sure you have backups and that they are not on the device

bitter locust
#

could be that, because it does fully start without issues, but crashes seconds after it started

crude inlet
abstract hearthBOT
#

@vale sluice Discord isn't like IRC, you don't have to tag people on every response. Keep in mind that every time you tag somebody, they get a notification ping. That can very quickly become annoying and people may block you.

When using Discord's new Reply feature it defaults to pinging the person you reply to, click @ ON to @ OFF to stop this - on the right side of the compose bar.

You have to change this every time (thank the Discord devs for that).

Command '~irc' was invoked by: Tinkerer
humble mirage
#

I've already given you all the information I have. There's nothing more I can do for you.

vale sluice
#

ok, thank you

abstract hearthBOT
dawn urchin
#

-_-

#

It is not code, it's just my settings of HA

humble mirage
#

It's more than 15 lines of text, the bot doesn't care what it is

#

25 lines of anything is disruptive

dawn urchin
#

Fair

humble mirage
#

When you click More info what does it tell you?

dawn urchin
#

The standard stuff;

If you just started, make sure you have given the Supervisor enough time to start.
Check the Observer
Try a reboot of the host
Check System Health
Ask for help

#

Observer:
Supervisor: Disconnected

System health is what's in the pastebin

high token
#

do you have access to a terminal?

#

can you run ha su repair ?

dawn urchin
#

Dead, all addons are down too

orchid pebble
severe cedar
#

has anyone has luck installing i2c on vm install

vale sluice
#

Thanks again

crude inlet
#

@dawn urchin you might try updating to OS 6.6 from 5.13

charred nacelle
#

I've installed hassos on a nuc, is it possible to do the wifi in the cli with a monitor and keyboard or do I have to find a way to SSH in to the nuc?

raw hedge
crude inlet
limber hedge
#

Ok so whenever I leave HA on for some time it refuses to connect and it only starts working when I reboot the host from the home assistant cli any reason for this?
I have ha installed using a Vm in a hypervisor with ha os on a mac

frosty bloom
#

Hey,
Is there a way to set my HA android APP to switch automatically between the external duckdns record and the internal homeassistant.local hostname when the internet drops and wifi still up?

torpid merlin
#

HA not booting from Virtualbox after Grub2. ANyone else?

spring rock
#

I'm a little confused, HA seems to be running fine in a virtual machine under KVM, but when I try to connect to the web interface I am unable to hit it. I've tried homeassistant.local, homeassisstant.local:8123 and 192.168.122.1:8123 (which is the bridge IP for KVM) I also tried 10.12.183.217:8123 which is my main connection IP, though I didn't expect that to work, and of course it didn't. Does anyone know why it would be unreachable?

limber hedge
#

ok so someone recommended me to run the log command in the cli and now i cant access HA at all not any instance that i have on any laptop

humble mirage
#

What command?

crude inlet
#

And how many instances do you have

limber hedge
#

docker logs -f homeassistant

limber hedge
#

after this error it will continue to boot but i cant access home assistant due to this error

limber hedge
crude inlet
#

I'm confused. it didn't boot and yet you are following the logs for the HA container? That indicates the OS has booted. What are you seeing in the HA logs?

#

And focusing on one instance at a time would be better

limber hedge
#

yes it boots but i cant access ha i get this error
Hmmm… can't reach this page
Check if there is a typo in homeassistant.local.
Search the web for homeassistant local
If spelling is correct, try running Windows Network Diagnostics.
DNS_PROBE_FINISHED_NXDOMAIN

#

also in the logs its saying network unreachable

limber hedge
#

any help please

limber hedge
#

i did a fresh install of HA and it seemed to work so ill guess is let everything up again

sacred epoch
#

Okay so I did something seriously bad. I can't get to the home assistant page anymore. What do I do?

humble mirage
#

Did you set up the SSH add-on?

sacred epoch
#

no

humble mirage
#

Do you have a keyboard and monitor you can connect to it?

sacred epoch
#

To what?

humble mirage
#

The host running HA

#

(unless it's a VM, in which case you have console access using that)

sacred epoch
#

I'm running it on my laptop

#

on a vm

humble mirage
#

Then... you can connect to the console

#

And reverse whatever you did that was seriously bad

sacred epoch
#

Well here's the problem

#

I deleted my old config

#

And all of the ip stuff I did. Duckdns, static ip, port forward, etc.

humble mirage
sacred epoch
#

Made a new HA VM and it won't let me in

humble mirage
#

Did you at least have working backups?

sacred epoch
#

Oh I don't give a shit about that old one

#

It was so messed up

#

But now I can't get to the frontend at all..

humble mirage
#

Have you got to the onboarding stage yet?

sacred epoch
#

No..

#

I can't get to it

humble mirage
#

Is the UI showing at all?

sacred epoch
#

it just says didn't send any data

ERR_EMPTY_RESPONSE"

#

Like.. how did I screw it up this bad?

#

Isn't all the VM config saved locally? I don't get it

#

I can connect to the observer

#

But not the UI

#

sigh

humble mirage
#

Somebody hopefully will be able to help, I've never seen that happen without maybe the host having zero working Internet access

#

Even then, usually the pre-onboarding UI shows

sacred epoch
#

what the actual shit. I did docker container ls -a

#

and all of the containers ARE STILL THERE

#

How.. I deleted the old VM. Where are these being saved?

#

I just need to get rid of everything and it'll be fixed.

humble mirage
#

"the containers"?

#

HAOS has many containers that are part of the basic install

sacred epoch
#

Well there is some that I made

#

core_duckdns

humble mirage
#

Then you didn't delete the VM, or deleted it and re-used the disk

sacred epoch
#

Wait what

#

It edits the disk?

#

Because I did reuse the one I downloaded originally

humble mirage
#

So... VM 101... the disk file is the "disk" the OS in the VM runs from

#

Clearly when you're making changes inside the VM that changes the disk... how the heck else would it persist changes?

sacred epoch
#

Ah..

#

Okay let me do that one second

#

Okay so it's fixed now, woopie

#

I'll hop back into integrations to get that cast thing working once I set it up

untold tendon
#

Hey,

I am trying to install HA-OS on truenas scale but i can't seem to get it working anyone ideas

humble mirage
#

You're installing it in a VM?

untold tendon
#

I'm trying

#

Since I need DuckDNS for google Assistant, in the future this will be fixed with a reversed proxy but for the meantime

untold tendon
# humble mirage You're installing it in a VM?

I'm trying to install it in VM. Specifically scale not core since scale is based on Debian and has the better VM support then Core based on freeBSD. Scale also has Docker support but I don't wanna run it in a docker container

humble mirage
#

You've not given anybody any information on:

  1. What exactly you're doing
  2. What problem you're having
untold tendon
#

My bad

humble mirage
#

Pretty much the equivalent of phoning a car garage and saying yeah, so the car makes a strange noise, what's wrong?

#

Did you try turning off the radio?

untold tendon
#

I'm trying to run HA-OS in a VM on Truenas scale since this has the better VM support.

the virtualization is based on KVM so I tried using the qcow2 image but didn't work since it requires an ISO, which doesn't exist
I tried just renaming the qcow2 file to .ISO but didn't work.
I tried converting a .VDK to .ISO but didn't work.
I've checked over the config of the VM and all seems good.

It gets stuck on startup.nsh.

Maybe someone has the same problem or did find a way around this.

Probably it's something very simple and I am to stupid to understand but that's fun about learning this stuff

humble mirage
#

So, the ISO is for an installer. HA provides disk images. These two things aren't even close to equivalent.

untold tendon
#

I know I found a way to convert a .VDI/VDK iirc to .ISO but that didn't seem to work

humble mirage
#

Well, yeah, no

untold tendon
#

Thanks

#

I feel so stupid now for not just googling this.

lucid pecan
#

Since a recent crash I have had to reinstall HA OS and import latest backup

#

since then, the VM that runs HA OS is using a LOT of CPU

#

I have reinstalled again

#

after booting the OS the VM uses a reasonable amount of CPU

#

but as soon as the backup is imported, I am back with a CPU using a LOT of resources

humble mirage
#

Do you know what is using the CPU? Have you narrowed it down to Core or some other container?

lucid pecan
#

running top from the host says that npm start and node are what uses a lot of CPU

#

alterantively

#

nod I can understand

#

npm start not so much

humble mirage
#

Those will be add-ons then

lucid pecan
#

could it be that something is trying to start but fails to do so ?

#

ok then how can I spot which add-on is guilty then ?

humble mirage
#

That I can't help with

lucid pecan
#

ok killing them one by one seem to indicate Z2M is the one in cause

humble mirage
#

At least you know which add-ons logs to check now

tame scarab
#

i need help with aqualogic add on if anybody can help please
i tested via telnet and can see communication but when on rpi it does nothing
also trying to display temp on F for th16 sensor

vestal plover
#

Hi guys, I can't manage to reach the onboarding stage after installing HA on a VM. I have been following https://www.home-assistant.io/installation/windows#install-home-assistant-core and able to get to the HA Cli, but the "Preparing Home Assistant" has been running for more than 8 hours already.

When I look at the logs, it shows the following:

22-05-28 17:38:09 INFO (SyncWorker_3) [supervisor.docker.interface] Updating image ghcr.io/home-assistant/qemux86-64-homeassistant:landingpage to ghcr.io/home-assistant/qemux86-64-homeassistant:2022.5.5
22-05-28 17:38:09 INFO (SyncWorker_3) [supervisor.docker.interface] Downloading docker image ghcr.io/home-assistant/qemux86-64-homeassistant with tag 2022.5.5.
22-05-28 17:38:24 ERROR (SyncWorker_3) [supervisor.docker.interface] Can't install ghcr.io/home-assistant/qemux86-64-homeassistant:2022.5.5: 500 Server Error for http+docker://localhost/v1.41/images/create?tag=2022.5.5&fromImage=ghcr.io%2Fhome-assistant%2Fqemux86-64-homeassistant&platform=linux%2Famd64: Internal Server Error ("Get "https://ghcr.io/v2/": net/http: request canceled (Client.Timeout exceeded while awaiting headers)")
22-05-28 17:38:24 WARNING (MainThread) [supervisor.homeassistant.core] Error on Home Assistant installation. Retry in 30sec
22-05-28 17:38:54 INFO (SyncWorker_2) [supervisor.docker.interface] Updating image ghcr.io/home-assistant/qemux86-64-homeassistant:landingpage to ghcr.io/home-assistant/qemux86-64-homeassistant:2022.5.5```
# 
22-05-28 17:50:15 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state CoreState.RUNNING
22-05-28 17:50:16 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state CoreState.RUNNING
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.FREE_SPACE/ContextType.SYSTEM
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.TRUST/ContextType.SUPERVISOR
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.PWNED/ContextType.ADDON
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.DNS_SERVER_IPV6_ERROR/ContextType.DNS_SERVER
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.SECURITY/ContextType.CORE
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.checks.base] Run check for IssueType.DNS_SERVER_FAILED/ContextType.DNS_SERVER```
# 
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state CoreState.RUNNING
22-05-28 17:51:46 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete
22-05-28 17:51:46 INFO (MainThread) [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy
22-05-28 17:53:59 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json
22-05-28 17:54:12 WARNING (MainThread) [supervisor.utils.codenotary] rpc error: code = Unavailable desc = connection error: desc = "transport: authentication handshake failed: read tcp 172.17.0.2:55254->95.216.72.55:443: read: connection timed out"
22-05-28 17:57:25 INFO (MainThread) [supervisor.store.git] Update add-on https://github.com/home-assistant/addons repository```
#

Anyone got any idea?

#

I have also tried the method mentioned above about changing the DNS using the nmcli command, but still have no luck with it.

high token
#

Your link points to a HA Core installation but clearly it's a HAOS installation or you've been following mixed instructions

#

Do you have correct network adapter settings?

#

is it bridged and are you bridging an ethernet connection? If it's wifi you're bridging that won't work

placid sage
#

Hello I installed V7 on USB raspberry 3 work fine but when upgrade V8 don't work can't also install V8 directly. TY for help

vestal plover
placid sage
#

Hello everyone !
Doing a fresh installation of home Assistant on Raspberry Pi 4B, on an SSD through USB.
Not that I'm blocked, but I am wondering if I can improve the boot time of the setup.
Currently, what takes the most of the time is Wait Until Kernel Time Synchronized which takes roughly 30 seconds, the rest is pretty straightforward.
What does it means? Can I do something to improve that timing?

My setup:

  • Raspberry PI 4B 8GB of ram
  • SSD on USB3 (with quirks)
  • Fresh installation, I literally just created my account and I'm sitting on the dashboard
  • Ethernet
  • Fresh install of HASS 8.1

Thanks !

#

On another topic, if it helps new people, on a fresh installation I get "Error while loading page lovelace." after signing in.
I don't have the error while in private browser.
I do have a javascript console error: xxx has been blocked by CORS policy: The request client is not a secure context and the resource is in more-private adress space local.
I'm using Chrome Version 102.0.5005.61 (Official Build) (arm64)

The solution for me was that https://stackoverflow.com/questions/66534759/chrome-cors-error-on-request-to-localhost-dev-server-from-remote-site (disable).
I think there is something to be handled regarding preflight requests on HASS, but until then...

split drum
#

Is there a known issue with Home Assistant seeing devices on another VLAN/Subnet?

#

Using DHCP

humble mirage
#

Well, it won't see DHCP data for another subnet/VLAN

split drum
#

Will it autodiscover it though?

humble mirage
#

Autodiscover what?

#

Most autodiscovery will only work on the local network, because it's based on broadcast messages

placid sage
#

hola no conssigo instalar OS en una raspberry 3b+ podrian ayudarme.muchas gracias

glass ruin
#

Hey guys

#

need some input here

#

trying to setup the UEFI image on a standalone machine to run HA

#

Specs before it gets asked :

placid sage
#

error syncworker_1 ,2 ,3,4 y 5....

humble mirage
glass ruin
#

Asus Prime A320M-K, Ryzen 3 3100, 2x 8GB DDR4 2400, Intel 256GB M.2 NVME SSD, Nvidia Quadro NVS295

#

used ballenaEtcher to "flash" the UEFI image to SSD

#

start system and it basically hangs at the auto boot screen

placid sage
#

I can´t install OS on raspberry pi 3b+ can you helpme please

glass ruin
#

if i select Boot System 0

#

system starts to do its thing and then crashes

#

get an error message and reboots

#

happens so fast that I don't even have a chance to see what's causing it

#

booting System 1 will do absolutely nothing

placid sage
#

ok I try to do it

humble mirage
glass ruin
#

i guess its time to install fedora and say fuck it and messing around with HAOS

#

its been almost a month i been messing around with this install and getting no where

#

#developers saying its an install channel issue and no one in here has an answer either

#

A Ryzen 3 3100 should have more than enough resources to run HAOS

#

and before its asked... yes motherboard is on the latest bios

#

I tried different RAM

#

tried running HAOS off a usb stick

#

even loaded up kali live without any issues

#

even fired up windows

#

everything seemed to work fine... only one im having issues with is HAOS

high token
#

#developers is for developing not for a direct line to a dev 😅 so this is the correct channel yes

#

but also if no one is around, can only wait and hope someone replies when they see it. Otherwise can ask again at a later point

#

when you say EFI, you mean the generic image right? and you flashed the latest image 8.0?

#

it shouldn't work from a USB stick, it's meant for the internal drive of the machine

#

so an SSD connected through sata for example

#

@glass ruin did you also made sure the requirement for secure boot and UEFI are correct?

glad bay
#

Hi ! I have a quick question, in your installation guide, you mention one should use a rpi 4, but a 3 would be fine. What about a zero w ? would it work, but very slowly, or not at all ? I'm currently running homebridge on the zero w, and I'd like to swap to home assistant, as I've seen there's a homekit port, but before making a fuill change, i'd like to test home assistant, and see if there's everything I need, so I'm likely to test it on a zero if possible

crude inlet
#

you can do it. no one will want to help with issues

high token
#

but also images for the pi zero are no longer being made. You'd have to use an older image instead
HAOS has separate images for each Pi version (Pi 2 ,3 4)

glad bay
#

oh, I didn't know I would need a different image

glass ruin
#

just downloading 8.1 and going to give that a whirl

#

if that still fails im going the fedora route

crude inlet
#

HA OS was not created for any and all random PC hardware. If it works, then great. If not, pick something more standard

glass ruin
#

its linux based i dont see the issue

crude inlet
#

Based on buildroot. Targeted at specific SoC boards

#

The generic image was originally only for NUCs

#

But was determined to be generic enough to try on other things.

#

It isn't ubuntu or fedora or anything else you're going to find on distrowatch. It's more like firmware for embedded systems.

glass ruin
#

in a way its sad

#

there's a ton of older "servers" without UEFI support that are quite efficient and could be a great platform to run HAOS

#

i was planning to run HAOS on an older HP DL320e V2

#

1U half depth

#

easily can go into the rack along your network switches and about as loud as one too

#

250W power supply, 2x 3.5HDD internal USB key

#

specially now that the raspberrypie market is super constrained and if you want it now you have to pay nearly $200 for one

#

anyways

#

A start job is running for Wait Until Kernel Time Synchronized (58s / 1min 30s)

#

and it looks like it froze on there

high token
#

Perhaps silly but you have plugged in an ethernet cable right?

#

stuck as in frozen or keeps counting up and never moves past it?

#

(I seem to remember there's a timeout and it's supposed to move past that even if it doesn't synchronise - but not 100% certain on that)

glass ruin
#

Ethernet cable is plugged and and activity can be observed on port

#

( lights are blinking )

#

the date is correct in bios but time isnt

high token
#

so at what stage is the screen output now?

glass ruin
#

lo[ 185.701613] random: crng init done

#

and thats it

#

froze

high token
#

not sure then

#

if it's consistently freezing at that point you can always open an issue on the OS github and explain where it's getting stuck

glass ruin
humble mirage
#

Do read the requirements first

glass ruin
#

use ubuntu-20.04.3-live-server-amd64

high token
#

preferably you want to follow the official instructions and not a 2 year old guide

humble mirage
#

TL/DR: Nobody should use Supervised. And that goes doubly if you're going to ignore the requirements and pre-break your install

glass ruin
#

i ran that exact guide with no issues

#

same image as well

#

ran on the decade old super micro coreduo

humble mirage
#

If you're going to use the Supervised install method, you have to run on Debian Bullseye

glass ruin
#

was about as fast as molases in january

glass ruin
humble mirage
brazen plume
#

Hey! I'm trying to update the HA Supervisor but it seems that there are problems. I wanted to install the SSH add-on to connect to the system but it seems that I cannot browse add-on store (and I can't add any repositories, when I click on "add" it does nothing)

For the add-on store, i didn't get any errors. But for the Supervisor update, i got that error : https://www.toptal.com/developers/hastebin/akexohakuw.apache

brazen plume
#

All problems have been resolved by installing HomeAssistant using github repo url. I had installed HomeAssistantOS using RPI Imager...

rustic arrow
#

Hello - please could anyone who uses kube give me a shout? I'm struggling with name resolution - just from the hass pod - nowhere else. Interested in how other people have got it playing ball.

teal rapids
#

What’s the best way to add devices that are in another house to my main home Assistant?

humble mirage
little swift
#

upon installation/onboarding, an Owner is created. How can we add a profile picture? Its not the same as a person entity, so now I have both a person, And an owner for myself...

fleet mirage
#

Does anyone face the problem with NetworkManager on Debian 11 Bullseye when using supervised installer script ?

The Issue is NetworkManager try to modify existing and wiping dhcp of nic.

high token
#

||(of course this doesn't depend on how you installed HA 👀 )||

lapis kettle
#

Trying to install home assistant OS on a raspberry pi 4, but I seem to be having some DNS issues. Booted it up with the 64bit 8.1 image, and opened up the http://homeassistant.local:8123/ page. Seemed stuck on that "Preparing..." page, and noticed clicking on the dot showed the logs. Very difficult to copy&paste from the web page, but at some point I'm getting:
22-05-29 20:37:42 INFO (MainThread) [supervisor.store.git] Cloning add-on https://github.com/esphome/home-assistant-addon repository
22-05-29 20:37:47 ERROR (MainThread) [supervisor.store.git] Can't clone https://github.com/home-assistant/addons repository: Cmd('git') failed due to: exit code(128)
cmdline: git clone -v --recursive --depth=1 --shallow-submodules https://github.com/home-assistant/addons /data/addons/core
stderr: 'Cloning into '/data/addons/core'...
fatal: unable to access 'https://github.com/home-assistant/addons/': Could not resolve host: github.com
'.

#

Which fails with a "Client.Timeout exceeded while awaiting headers". It waits 30s, and tries again

little swift
high token
#

I spun up a new instance to check and for me it created a person though

little swift
#

my person entities were all yaml configured, and after I deleted those and made new ones in the ui, I couldnt make one for myself... username already existed

#

also, one cant change the login name I guess ? (other than via manually editing several .storage files...) only password

high token
#

you mentioned onboarding so I assumed you meant on a fresh install

#

but even so yours were yaml configured before, but the owner wouldn't have been

#

that should have been made during onboarding even back then

#

the username no, you can't change it. You'd need to make a new user/person instead

little swift
#

as I did. so I now have an Owner without a person entity, and a new Person entity which I have made login-able (a user) and is an administrator... Id love to streamline that

high token
#

weird though

#

on a fresh install I have

unknown.png
#

which is the one made during onboarding

little swift
#

yes, I see that. I can delete the user for the Owner, but not sure what will happen after that.... 😉. o, wait, delete User is greyed out. can not delete..

high token
#

hmm you shouldn't actually be able to

#

same way Administrator toggle cannot be used in the owner person/user

little swift
#

yep, can toggle local only, and change Display name

high token
little swift
#

btw, I fixed it by setting "is_owner": true, on my user login, and deleted the duplicate... back to the correct number of 1:1 Person/User

#

bit of a hack, but hey, its that easy, better than reinstalling 😉

high token
#

Hehe

wide wind
#

Hi everyone, new here, just set up my intel nuc with home assistant. Not sure if this is the right place to say this, but wanted to point out that when trying to install HOA on my ssd from a live Ubuntu 22.04 Linux distro, balenaEtcher doesn't work as it runs fuse3, and not fuse2. The issue is with etched, but probably it's worth mentioning that using an older Ubuntu distro, in my case I went with 18.04, solves the issue.

steel sky
#

Thanks for the heads-up. A solution seems to be to apt install libfuse2.

wide wind
#

Tried, but it won't install on the live cd, seems to have been removed from the repository maybe

#

Says unable to find the package

steel sky
#

What was the error, by the way? In case someone shows up with the same problem.

wide wind
#

dlopen(): error loading libfuse.so.2 AppImages require FUSE to run. You might still be able to extract the contents of this AppImage if you run it with the --appimage-extract option. See https://github.com/AppImage/AppImageKit/wiki/FUSE for more information

#

I did run update first

sand mulch
#

Hey, I'm having some trouble with my Home Assistant Install inside a MacOS Oracle VM Virtualbox. I followed the instructions here: https://www.home-assistant.io/installation/macos/. However best I can tell my box has no connection to the network. I think this is the case, because when the CLI finishes booting up, it shows some network information. Here the ipv4 address is blank. Also, I can't find the device in my router settings or anything else. Has anyone had any experience with this problem?

#

Should also mention that my macbook is over wifi, in case that complicates things

humble mirage
#

VirtualBox doesn't always support bridged WiFi networking, check what yours is configured for

sand mulch
#

In Settings> Network> Adapter 1 Enable is checked, Attached to is set to Bridged Adapter, Name is en0: Wi-Fi

#

So if this is a problem, how would I go about fixing it?

humble mirage
#

Not sure TBH, I don't have a Mac, and I'm one of the lucky ones on Windows with working bridged WiFi

sand mulch
#

Can you point me in the right direction? How did it work on Windows?

#

Actually scratch that, thanks for your help. I'll spend some time on google

#

More time I mean

humble mirage
#

I don't run HA in VBox anyway - I only have it so that when people get stuck finding the Supervisor menus I can spin up a VM with the Supervisor and do the clicking around they didn't want to do

sand mulch
#

Me either. But I need it because I don't want to have to unplug my raspberry pi and move it to another network just to move it back. I just need something I can move around easier for a day

#

Was hoping this would be easier. But nothing ever is

foggy citrus
#

does anyone have problems installing duckdns?

#

i keep getting this error after starting

humble mirage
foggy citrus
#

ERROR: deploy_challenge hook returned with non-zero exit code

humble mirage
#

Right, the integration or the add-on?

foggy citrus
#

oh sorry thanks

sullen basin
#

anyone able to tell me what im missing? trying to install hass on a pi4 on m2 ssd, the argus case. Bootloader is okay, but Pi keeps saying on startup no bootable partition found. Tried with both pi imager and balena.

crude inlet
#

@sullen basin tried a different usb port?

sullen basin
#

on the argus?

crude inlet
#

on the pi

#

oh right the argus case

sullen basin
#

@crude inlet yeah, tried all 4 usb ports but alas. almost thinking i missed something while trying to format or flash the drive

brazen herald
#

I did this recently. I installed the image to the SSD though the Pi booting from the SD card

#

That worked perfectly, so if you haven't tried that, it's worth a shot?

#

(Argus case with the M2 as well)

sullen basin
#

you mean the bootloader @brazen herald ? Ive gotten to the part where it says booting from usb, yet at that point it states GPT : no bootable partitions

brazen herald
#

Honestly, I just followed the guide from here: https://community.home-assistant.io/t/installing-home-assistant-on-a-rpi-4b-with-ssd-boot/230948

Home Assistant Community
Installing Home Assistant on a RPi 4b with SSD boot

[UPDATE 2020-10-14 by @Jpsy ]: Added instructions to update HA OS through CLI. [UPDATE 2020-10-18 by @Jpsy ]: More details added on installing and using Raspberry OS to update the EEPROM firmware. [UPDATE 2020-10-20 by @Jpsy ]: Infos added on using Raspberry OS “headless” through SSH (no monitor or keyboard attached). Thanks to @LondonBenj...

sullen basin
#

when i check the ssd on my windows desktop i can see it in diskpart and pi imager and those things, but i cannot access it by typing the drive letter

brazen herald
#

I made sure I used the Raspberry Pi to set everything up on the M2 directly, and that was it. It "just worked"

high token
#

@sullen basin the partitions aren't compatible with windows so they won't show

#

there are 8 but you should only be seeing the boot partition

#

direct boot from an SSD isn't the most stable and can depend on SSD/adapter used

#

if you have flashed the latest OS (8.1) to the SSD/M2 and it's not working there's not really much else you can try

#

only alternative I can think of is adding quirks

#

otherwise flash the OS on an SD card and move the data partition to the M2

raw hedge
#

Blana etcher works

#

You probably needs to load raspberry pi os first and update the bootloader for usb boot etc

high token
#

I believe HAOS incudes bootloader updates

#

although I seem to remember they were removed at a certain point to avoid breaking existing installations

#

latest HAOS even comes with most popular quirks in to mitigate drives that need those

raw hedge
high token
#

this is what I was having a look at right now

#

we update kernel and rpi-firmware

#

but don't think the eeprom is included in either of those

#

I know the PR from when it was excluded but don't see any for reverting it later on (which kinda makes sense I think)

#

2 and a half years ago as well. Damn!

#

didn't realise it's been that long

#

@sullen basin best thing to do to make sure connect a monitor and boot up the Pi without and SD or M2 and look at the bootloader version on the screen

#

It is a Pi4 right?

raw hedge
#

I would for best practice, still use the raspberry pi os for eeprom etc.. I do like the power savings

quaint arrow
#

Good Evening, I am trying to install home assistant on an idea nuc. I have booted into Ubuntu Live CD. But I cant seem to start or launch Balena Etcher to burn image on my Inel nuc Nvme?

#

When I click on it doesnt run?

finite canyon
#

Guys can home assistant work on raspberry pi2 b?

high token
#

you can also use Ubuntu's disk utility to write the image to the nvme

high token
stark oasis
#

Hope some one can help me - My HA installation restarts randomly. I can see that the memory is "spiking" and in the supervisor Log I can see this:
WARNING (MainThread) [supervisor.misc.tasks] Watchdog found a problem with Home Assistant Docker!
How can I find out what the cause of this is?
My setup: RPI 4 (2GB) + SSD, Dabian OS with Docker and HA in container. Newest version og HA (Core 2022.5.5 Supervisor 2022.05.3)
Conbee II with Deconz
I have tried stopping almost all my addons with no succes. Still reboots randomly
Thanks in advance

humble mirage
#

Did you use the Supervised installer then?

stark oasis
humble mirage
#

Well, if it's Debian and you have the Supervisor, you used the Supervised installer

stark oasis
humble mirage
#

Start by updating Debian

#

Or, better, take a backup, download it, and flash the SD card with HAOS

stark oasis
# humble mirage Or, better, take a backup, download it, and flash the SD card with HAOS

So basically a new installation. The problem is that I have tried this. I have another RPI 4 with SSD and on this one I have installed HAOS and then I took the backup from the old setup and restored it on the new one. But after I did that the new RPI4 with HAOS also startet to reboot randomly. So I really don't know what to do anymore, because bassically our hole house is controlled by HA

humble mirage
#

Possibly a power problem - Pis are quite fussy about the quality of their power

stark oasis
abstract hearthBOT
#

Please use imgur or other image sharing web sites, and share the link here.

Image posting is blocked in most channels to discourage people from sharing text as images. Sharing text as images assumes that everybody sees the world as you do, which isn't the case. Some people are colour blind, or have visual impairment that means they can't make sense of an image of text.

Command '~images' was invoked by: Tinkerer
humble mirage
#

You didn't say what custom components, if any, you're using - or the add-ons

sullen basin
#

@high token sorry just now saw the chat again. Used the bootloader thru Pi Imager. might actually just go for boot on sd and storage on m2 😄

eager iris
#

I run my ha on a rpi3. It keeps boot-cycling. What can I do? I have no clue what is wrong 😦

humble mirage
#

Two most likely problems are:

  1. Power
  2. Failed/failing SD card
eager iris
#

power did not change. it boots - so the sd itself is fine

humble mirage
#

Doesn't mean it's not a power problem

placid sage
#

Hey, how’s everyone doing? I’ve just done a fresh install on a raspberry pi 4. When turning on the raspberry pi I seem to be stuck on cli command prompt and unable to login. Using a pc on the same network I could navigate to the local host and create an account and login but on the pi it says invalid login

crude inlet
#

@placid sage You would continue accessing your pi using a browser from another device on your network. Is there a reason you are trying to access the pi directly?

placid sage
#

Ah I see. So I can’t access home assistant from the pi itself ? (I have a small screen connected to the pi and my plan was to wall mount that screen

humble mirage
#

No

placid sage
#

Oh I see. Thanks 🙂

eager iris
humble mirage
#

I personally don't care - you're the one with the issue

#

Rather than taking an argumentative approach, why not work with us?

sullen basin
#

so @high token , to add on. Its a PI4 4GB with the Argon case and m2 drive. m2 is a kingston 240gb b+m key. Bootloader is 507b2360 2022/04/26 . It says Trying Partition : 0 , then follows up with GPT: No bootable partitions. So yeah, either its my m2 ssd or i just need to root on sd sadly 😛

high token
#

botting on sd card and moving everything else is quite stable so you're not loosing much

#

still want to avoid power loss of course

sullen basin
#

yeah will probably go for that. just stinks i cant get this to work xD

high token
#

quite a lot of people with that issue have been people with the argon case though. So not just you

sullen basin
#

bought the argon case just to make sure i could do it xD

high token
#

if you have a spare SSD and adapter and try that that might just work 😛

#

Personally never saw the appeal with that case

sullen basin
#

any other case you recommend for the pi4 and ssd?

raw hedge
#

Does tape count?

wide wind
raw hedge
#

Latest Ubuntu works fine.. docker install HA or set up a vm for ha os

wide wind
#

I think he started installing on Nuc with live Ubuntu to write ha os on the ssd. There's no docker there

eager iris
#

I believe it is killed. Any useful way to access the backup (which is ON the sdcard of the pi)

humble mirage
#

Well, then you don't really have a backup

#

You can however connect the SD card to any Linux PC and mount the file systems

eager iris
#

is there a way to boot it in a kind of emergency mode?

solemn rover
#

Hello, First of all, my English is very weak, I apologize to everyone, I need help. I have installed home assistant on the virtual machine, but it does not give me an ip, I receive the Internet over the phone, can you help?

eager iris
#

What are the network settings of the virtual machine ?

solemn rover
#

2 gb ram and 2 core processor

quaint arrow
wide wind
quaint arrow
wide wind
#

Are you running from Ubuntu 32 bit?, and did you run chmod +x filename before?

stark oasis
quaint arrow
eager iris
humble mirage
#

If you have the backup you can restore it to a fresh install

eager iris
#

this does not work for the docker-version?

grand pivot
#

it's available in a docker install

eager iris
#

"Follow the link at the bottom of the account creation page to upload your backup from the previous installation" -> I dont see it

abstract hearthBOT
#

@eager iris Your message has been deleted as it contains a link or a domain name 'pasteboard_dot_co' that is on the blocked list because of: 'Virus detected!'.
Please re-post by removing/changing the domain name/link. Your original message has been DM'ed to you.

eager iris
#

hmm which picture service is allowed/approved?

grand pivot
#

right, only the "backup" part is supported in a docker install. restoring is just untarring the backup to replace the config directory contents

abstract hearthBOT
#

Please use imgur or other image sharing web sites, and share the link here.

Image posting is blocked in most channels to discourage people from sharing text as images. Sharing text as images assumes that everybody sees the world as you do, which isn't the case. Some people are colour blind, or have visual impairment that means they can't make sense of an image of text.

Command '~images' was invoked by: RobC
grand pivot
#

without the supervisor, it's difficult to overwrite the config directory in a running setup

alpine egret
#

I just got a new pi4 8gb that I will use with home assistant. I wonder if I should install Debian server and a supervised ha installation in docker or just home assistant os. Question mostly is if I would have excess resources for other containers that haos don't have access to.

humble mirage
#

Nobody should use Supervised

#

Also, if you're doing that to run other containers, you've pre-broken your install

#

No additional software, outside of the Home Assistant ecosystem, is installed.

eager iris
#

Which file contains my "Helpers" ? I can not find them in Automations or configuration.yaml

steel sky
#

They're in .storage/. Best not to touch anything there.

eager iris
#

hmm I see. How to migrate them efficiently?

humble mirage
#

If you're restoring a backup they're part of that

#

If you're trying to cherry pick bits of a backup, that's likely to end in tears

steel sky
#

Or are you trying to migrate yaml helpers into gui?

eager iris
#

I am migrating from my broken PI installation to a docker installation. restore backup does not exist. simply unzipping the backup into the respective location did not work. I believe the 2 installation types are too different. Thus I am migrating step by step stuff.

humble mirage
#

Not at all, both use exactly the same container image

#

Even if they didn't, HA Core is the same regardless

eager iris
#

well. after putting the backup, I was shown some loading screen. A short message of "an error during onboarding" and after refreshing I got the user creation dialog.

#

Ok, I got the helpers by dropping the files from the backup

#

Interestingly they got renamed, underscores were removed

surreal halo
#

Hi all. I just bought an odroid HA bundle and plugged it in. I'm not able to connect via local ip or the .local:8123 endpoint. I am able to get to the observer page where everything is listed as healthy and connected. Has anyone faced this issue before? Wondering if I got a bad/misconfigured setup.

grand pivot
#

It will take a while for the page to be available on first boot

high token
#

There does tend to be an increase in people with odroids having issues though

#

hopefully not one of them

crude inlet
#

@surreal halo just to be sure, it would be local_ip:8123

surreal halo
surreal halo
crude inlet
#

@surreal halo I would expect the odroid to be done under 20 assuming the internet connection is decent

#

You should be able connect a monitor and keyboard to the odroid without needing to reboot it

surreal halo
#

I joined here while waiting for ameridroid to get back to me (which thankfully took less time than expected). They told me to reflash the image on the device and that seems to have fixed it.

#

Now to start my trip down the rabbit hole :)

high token
humble mirage
placid sage
#

I'm fairly new to HA so I hope what I am asking doesn't sound bad

#

I have had an install running for a few months on an Rpi 4 on an Nvme drive. everything was working fine until last night and I was mucking around looking at installing the ESPhome add on and I saw that there was an upgrade available. So I upgraded the core and it rebooted, then I upgraded the OS and it rebooted, not sure of the version but it seemed to be 7xx to 7xx. Then I noticed there was an update to 8xx, so I clicked install. and it started but then it will not boot. I just get a black screen on the Rpi that is hooked up to a monitor, no indication that it is booting, but there network activity light is blinking. Finally powered it off this morning and same thing.

#

Well after typing this wall of info I just found HAOS 8.0 fails to boot after update on CM4 with NVMe SSD
#1911.

sand spindle
#

Hi, anyone know how to set up proxy on Home Assistant Operating System? I have the VM on private ip addresses and it can't reach internet without proxy. So I just want to put in the proxy settings somewhere so that it can check/download updates, etc etc. Thanks!

high token
high token
slim ridge
#

hi i tried on both hyper-v and virtual box lately to run HA its usllay getting stuck on preparing HA page

#

anyone facing this\

#

am doing the same procedure have done this 10 times minimum but this time its stuck there i even tried an older version

#

am helping to install it for a friend in india ..

dire anchor
#

sorry? any have intrusion instal for debian 11 notebook ?

paper robin
#

can anyone think of a reason why my lenovo thinkcentre m72e will boot haos fine from a usb key but not from the internal ssd? both flashed at the same time, the same way, with the same software, and with the same iso.

paper robin
#

after more research, it seems as though there is an issue with efibootmgr. However, when i try to use the recommended fix it tells me that efi variables are not supported on this system. I'm running xubuntu in "try" mode from a usb stick. The internal ssd alrady has haos installed. I'm just trying to get it to boot.

fallow nacelle
#

No docker image for the new release yet?

slim ridge
#

anyone facing infinite wait on the 20 mins ?

#

i tried hyper-v and virtual box on 2 different metals. (ps this is my 20th time installing maybe) it just wont push it through what could it be

high token
high token
slim ridge
#

@high token how can i send logsfrom the virtual machine ?

#

am getting rcu GP wait stuff

#

stall on cpu

vale kettle
#

just updated and my install is freaking out, anyone else having this issue?

#

Home Assistant Supervised setup

crude inlet
#

logs?

vale kettle
# crude inlet logs?

Ignore me - my add-ons didn't automatically start after the reboot. Started up mariadb and everything is fine now.

thin monolith
#

I'm about to migrate from SD card to SSD. I noticed that the image in the Raspberry Pi Images has a rather old OS, 7.6. Downloading https://github.com/home-assistant/operating-system/releases/download/8.1/haos_rpi4-64-8.1.img.xz and selecting that file instead should be equivalent, am I right?

crude inlet
#

@thin monolith yep. or you could update the OS after it is set up, migrate to SSD, and then restore your backup

thin monolith
#

sure, but I thought that it would be faster to start on the most up to date OS

crude inlet
#

that works too

thin monolith
#

also, I wasn't sure if the one installed by the RPI imager was 32 or 64 bits

#

this is my third attempt. I now bought a powered USB hub because my SSD apparently was too power hungry for the pi

crude inlet
#

should be 64

#

@thin monolith 64 for for pi4, and 32 for pi3

opal mirage
#

I'm trying to use Home Assistant in VMware Workstation 16 Player, but it doesn't access the internet, I tried playing with the WIFI Adapters but I can't understand what I'm doing wrong. This is the network info command and my vmware network adapters: https://imgur.com/a/dSnkk8N

crude inlet
#

@opal mirage try selecting the one wifi adapter you actually need bridged

#

after shutting down the vm

#

and cross your fingers as bridging wifi isn't great

opal mirage
#

I tried with the Intel(R) Wi-Fi 6 AX200 160MHz, but I'm going to select one at a time

zealous gust
#

I installed OS on a pi3, is it since update that im missing the shutdown/reboot buttons under settings>hardware or did I mess something up? 🤨

high token
#

Yes you can no longer reboot or shutdown your device unless you pay for HA Cloud

#

||They moved to the dotsvertical ||

zealous gust
#

Haha I see, you almost got me there 😛
Thanks for your support - I was rebooting by terminal so all gucci

grand pivot
high token
#

I'm not sure why that was moved tbh

#

didn't make sense to me

grand pivot
#

and the hardware screen itself is pretty sparse, but I guess there's more to come

#

and you don't really need to reboot or shutdown the host very often

waxen briar
#

On a new install of home assistant on raspberry pi 4 how long should it take to start setup. Right now I am stuck at a screen that shows the home assistant logo and rotating circle

raw hedge
#

As long as how slow your internet download / pipe to the container registry is.

cedar musk
#

im trying to restore a large backup to a fresh instance of HAOS, and it seems to be running out of space. im using the KVM image. is there a way to expand the disk before i ever try the onboarding?

waxen briar
zealous gust
golden pawn
#

Hi all. Am running HA in a k3s cluster at home. Cant seem to get Wake on Lan to work, have trawled support posts etc but can't figure it out. I have added an automation and the logs suggest it's being sent but it's not reaching the target (lgtv). I know the TV and network support WOL as I can send a WOL packet from different devices on the same network to turn on the tv. Anyone else running HA in kubernetes and using WOL? Any help greatly appreciated.

polar jungle
#

Hi all, i currently run a home assistant core setup and am wanting to shift in to a VM that runs the supervised version so i have access to plugins ect. i am using KVM on ubuntu and am trying to set it up with

sudo virt-install -n home-assistant
--description "Home assistant OS"
--os-type=Linux
--os-variant=generic
--ram=4096
--vcpus=2
--disk /var/lib/libvirt/images/haos_ova-8.1.qcow2,bus=sata
--import
--graphics none
--extra-args "console=tty0 console=ttyS0,115200n8"

the problem is that it creates the vm but never gets a ip address. has anyone got experience with installing the image via KVM ? any assistance would be greatly appreciated.

humble mirage
#

Did you already create the bridge network?

#

Also, you forgot to specify the network type, so it defaulted to NAT

abstract hearthBOT
polar jungle
#

hi yes i have created the bridge

#

i have checked it is working and has been allocated the ip address.

abstract hearthBOT
humble mirage
#

You created it, but you didn't assign it

#

Nowhere in your command is a --network option

polar jungle
#

i did try with this setting but was the same no ip alocated to the vm --network bridge:br0

humble mirage
polar jungle
#

i will try with --network br0

#

sorry im not very clued up with networking unfortunately. i have changed a few settings like net.ipv4.ip_forward = 1 to allow forwarding and am going to test again

humble mirage
#

I'd check that you set up the bridged network correctly

polar jungle
#

those 3 pics show the status of the bridge and all seems to be fine as far as i can tell

polar jungle
#

just never assigns a ip to the vnet interface

#

also should i be able to connect to the vm console cause for me it just hangs and wont accept any input, i was using this command "virsh console home-assistant" makes me think the vm isn't working at all

humble mirage
#

It looks like you're writing a lot there Pug of Crydee - be warned the bot will remove your post if it's over 15 lines

radiant scroll
#

Hi, i'm running on Pi3B+
I have tried HA "container"

  • ran fast and well
  • some services such as radio wouldn't connect
    yesterday tried HA "OS Supervisor"
  • all services including radio worked instantly.
  • very slow (dial-up slow)
  • crashes on updates (solved = found I must update supervisor first)
  • can no longer connect via app on Android.

Why do YOU choose one over the other?
Does anyone have a "favoured" PI3B+ setup?
(Thanks for the warning @humble mirage , Love to meet a fellow fan! 🙂 )

humble mirage
#

Loved the first book so much I read it to pieces and had to buy a second copy ablobjoy

#

I'd say:

  1. Don't use Supervised
  2. Do use either HAOS or Container
#

Supervised is a trap for the unwary

radiant scroll
#

Same story my first copy was given to me and ended in ruins. I now have a spare copy should I ever bump into a suitable soul to hand a copy to!

#

I miss the simple days... reading on a train, while waiting for a bus, on rainy days.... Digital life isn't the same.

steel sky
#

I got the big five-in-one one... and somehow lost it.

humble mirage
#

True, but I can now get the next book in the series as soon as I finish one 😄

steel sky
#

It was a significant fraction of the furnishing in my first appartment. I don't get how I could misplace it.

humble mirage
steel sky
#

For a PI I'd say HAOS is probably the best choice, really. But don't expect to run too many unrelated add-ons. Keep it to home automation stuff.

humble mirage
#

There is a learning curve, but it's no worse than HA itself

steel sky
#

Container is my weapon of choice, but not on a pi.

humble mirage
#

Well, a Pi is a great educational tool, and a meh home server

radiant scroll
#

I've been enjoying the container side...
was running docker on ubuntu server on pi.

HAOS was good other than how amazingly slow it was running

steel sky
#

That surprises me. I've never heard it should be much slower.

humble mirage
#

It shouldn't be

steel sky
#

But I'm not exactly keeping up either...

radiant scroll
#

I had a problem where I can't connect the mobile app. I feel the lag is the issue. according to the network Info supervisor Internet=True.
logs claim no internet.
wanted to check configuration files however cannot access add ons etc to access config file and as I am learning amd have the technical skill of Yahoo Serious in Mr Accident. I'm probably missing something in the pile.

#

couldn't access the add on store yet everything else is fine. tried 3 times different ways. Only way that works without problem is container

humble mirage
#

I've seen quite a few people with DNS issues on HAOS - despite it doing a bunch of things to avoid that happening

polar jungle
#

Hi ok managed to get everything working now

#

i have a weird issue though. i imported my HA core backup into the new supervised setup and everything is working except it thinks its a HA core installation. i cant see the plugin store ect

#

is it possible to import a core backup into supervised ?

potent crane
#

Anyone help me with installation please, i'm using docker to install on my Terra Master

abstract hearthBOT
#

Don't ask to ask, just ask your question. Then people can answer when they're around.

When you do ask a question, try to provide as much background detail as possible. Ask yourself these questions first so that others don't have to:

  1. What version of the Home Assistant are you running? (remember, last isn't a version)
  2. What exactly are you trying to do that won't work?
  3. Is the problem uniform or erratic?
  4. What's the exact error message?
  5. When did it arise?
  6. What exactly don't you "get"?
  7. Can you share sample code, ideally with line errors where the error occurs?
Command '.ask' was invoked by: Tinkerer
potent crane
#

s6-linux-init: warning: unable to ttyname stdout: No such file or directory
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
services-up: info: copying legacy longrun home-assistant (no readiness notification)
s6-rc: info: service legacy-services successfully started

#

I can get it to this stage, but I can't seem to access it via my server ip address and port 😦

humble mirage
#

How are you trying to start the container?

potent crane
#

Via docker

humble mirage
#

Yes... but what command line or what compose file or exactly how

potent crane
#

Arh i'm not logging in via shell but using the web interface

#

Sorry Tinkerer 🥲

steel sky
#

Terra Master is some kind of all-in-one NAS thing, right?

#

A bit of googling tells me there's no easy way to show all settings... but what does your containers Network and Port Settings tab look like?

potent crane
#

Yes, I have managed to run Raddar, Sonnar, Ombi all through docker ok

#

I'll take some screenshots

#

I know i'm a noob when it comes to this, but noobs have gotta start some where

steel sky
#

It's recommended to set the network type to host, but that may not be possible on your hardware.

#

The main thing though; Home Assistant runs on port 8123 by default.

#

You probably need to change the 4000 to that

potent crane
#

ok, I can give that a blast

#

😉

steel sky
#

Or the 6569, it's a bit unclear to me which is which

high token
#

do both to be safe? 😅

potent crane
#

Hahaah hedge my bets

steel sky
#

Probably would work in some way, to be honest.

high token
#

8123 to 8123? Or am I thinking of port forwarding

#

where did you get 6569 and 4000 from?

potent crane
#

Hello

#

We have a web interface now

#

6569 was automated and i told it to do 4000

#

I do see this error in the log

steel sky
#

Do you normally have to specify a port, or is that filled in by default for most images?

potent crane
#

s6-linux-init: warning: unable to ttyname stdout: No such file or directory
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
services-up: info: copying legacy longrun home-assistant (no readiness notification)
s6-rc: info: service legacy-services successfully started
2022-06-02 13:02:38 WARNING (Recorder) [homeassistant.components.recorder.util] The system could not validate that the sqlite3 database at //config/home-assistant_v2.db was shutdown cleanly

steel sky
#

That's just because you probably force restarted the container. Don't worry about it.

#

But do clean shutdowns in the future.

potent crane
steel sky
#

That's what I thought.

potent crane
steel sky
potent crane
#

Thanks for looking into this, i'm sure I will be back for some more heads up advise as I currently have Amazon alexa managing about 40 devices currently

#

Really appreciate the speedy replies, now i've got it up and running, I must jump on the BBQ

languid peak
#

When I do a Configuration check, I'm receiving "Integration error: htd_lync12 - Integration 'htd_lync12' not found". I have added a htd_lync12 folder to the custom_components directory with the necessary files. Any thoughts on what I should be doing differently?

high token
#

if you have just added the integration, restart first then add the integration in configuration.yaml (or wherever it's meant to go)

#

HA needs to load it first

cunning shore
#

Hi everyone. I am brand new to home assistant and indeed Raspberry pi.

I am going through the instructions on the home assistant website, but whatever I do, it just will not get passed the initial screen.

So far, it gets to the screen where it shows the system information and the home assistant URL and the Observer URL...

🤬🤬🤬

high token
#

but nothing loads if you go to the IP in your computer?

cunning shore
#

Sorry, I should have said. I can get into the ha dashboard from my laptop, but I cam not go any further on the pi.

crude inlet
#

There is no user interface on the pi.

#

What you are describing is what you should see

cunning shore
#

Ah okay.

crude inlet
#

You do everything from your laptop or other devices

humble mirage
cunning shore
#

So as long as the pi is connected to the Internet, I should be able to control everything through the dashboard online?

humble mirage
#
  1. In the browser of your Desktop system, within a few minutes you will be able to reach your new Home Assistant on homeassistant.local:8123.
crude inlet
humble mirage
#

Well, as long as it's connected to the network - it doesn't need to be accessible from the Internet

crude inlet
#

To access from outside your network, you would need to set up remote access of some kind

cunning shore
humble mirage
#

If you flashed the image then there's no Raspberry Pi OS

#

The console however, if that's what you're talking about, you just logout when you're done

abstract hearthBOT
steep hill
#

hello i have a very simple bug but i don't know how to solve it. I downloaded the virtual machine and set it up according to the instructions. it started, it showed me ip and web adress but of these two only Home assistans observer works. in cmd I ping it and I can see but the website is down, disabling the firewall also does not work, changing the browser too. What to do?

high token
#

su logs

#

assuming you are in ha >

#

otherwise ha su logs

steep hill
high token
#

yeah

steep hill
#

yee im in ha>

#

you can write it some other way because I don't really understand how it is supposed to help me

high token
#

it's a command

#

su logs

steep hill
#

okay i use it

#

is just a logs

high token
#

so no errors?

steep hill
#

nope

high token
#

core logs then

steep hill
#

okay i get somthink like line 5: declare '100' not a valid indentifier

languid peak
# high token HA needs to load it first

I saw that is typically an issue to restart HA after adding the integration folder, then updating configuration.yaml with the new integration. I commented out the line in the configuration.yaml (#htd_lync12: !include htd_lync12.yaml) and then restarted HA. When I removed the '#' and checked the configuration, I received the error I mentioned above. Any other thoughts?

high token
#

@languid peak then likely the integration hasn't loaded

#

check your logs. If it's loaded it will be one of the top logs after startup

#

every custom integration is logged at startup

#

[homeassistant.loader] We found a custom integration xxxxx...

distant torrent
#

If anyone is able to help that'd be great. I'm trying to install HA on my raspberry pi 4. I have it flashed successfully and can see the HA on my router. But when I try to go to the local website it says it cant be reached and that it refused to connect. I've tried accessing it multiple ways through its direct ip and the different ways the guide says but none seem to work

high token
#

best thing would be a monitor and keyboard to look at the logs for what's wrong

#

does the IP with port 4357 instead of 8123 work?

fathom cobalt
#

Might have been posting in the wrong area - I initially posted in general. I had a brief power blip today and now my HA is unreachable no matter what I do. I've power cycled the entire network. - no joy. I'm using a VirtualBox on an old Mac as my host and its been working for months. I think the blip got me. I can get to the backups via Samba. Don't want to rebuild if I don't have to. The weird message I get is from the CLI - "ERROR "OSManager.update' blocked from execution, system is not running - CoreState.Startup"

How do I get the system running? It looks like it's running to me from the CLI

Really stuck here so appreciate a leg up!

languid peak
# high token <@933036945657978932> then likely the integration hasn't loaded

Great input. The integration was not loading because I missed a "," in the manifest file. Now I'm getting a invalid configuration error message "Invalid config for [htd_lync12]: expected a list for dictionary value @ data['htd_lync12']. Got OrderedDict([('htd_lync12', OrderedDict([('host', '192.168.1.103'), ('zones', ['Deck', 'Rec Room', 'Loft', 'Mechanical', 'Study', 'Kitchen', 'Test', 'Great Room', 'Garage', 'Porch', 'North Patio', 'South Patio']), ('sources', ['Test 1', 'NA 2', 'NA 3', 'NA 4', 'NA 5', 'NA 6', 'NA 7', 'NA 8', 'NA 9', 'NA 10', 'NA 11', 'NA 12', 'Streamer', 'AVR', 'Great Room TV', 'NA 16', 'Echo Dot', 'MP3 Player'])]))]). Any thoughts on this?

lilac python
#

Hey all. Home assistant supervised docket question. So I just moved to a new time zone. I updated the time zone on the po and in home assistant general configuration, but the home_assistant.log file is still my old time zone. I logged into that docker container and ran a ‘date’ command and confirmed its still in the old time zone. Any idea how to change the time zone of the containers? Thanks,

arctic cliff
#

hi i dont know if this is the right channel, after update to 2022.6 my addon dashboard page, and Backup Page, ... is empty. How can i fix this?

hollow marsh
#

hello. I am trying to install HA on my rpi4 and it's hanging up at the loading screen

humble mirage
#

If you click the blue circle it should provide you with some log output

hollow marsh
#

yes.

abstract hearthBOT
#

Please use a code share site to share code or logs, for example:

Please don't use Pastebin, since it can randomly add spaces to the main view. Please also don't share text as images since it makes it harder for people to help you. Remember that others may have colour blindness, impaired vision, etc.

Command '~share' was invoked by: Tinkerer
hollow marsh
#

i just finished imaging my sd again and its booting

humble mirage
#

The Pi is connected with a cable, you're not trying to use WiFi?

hollow marsh
#

no i'm using cable

#

i'm new to all of this. very little computer background >.<

#

how do i share the log?

humble mirage
#

Copy the logs, paste them to one of those sites, share the URL you get here

hollow marsh
humble mirage
# 
22-03-11 07:35:17 INFO (MainThread) [__main__] Initializing Supervisor setup

Your computer has the wrong date

hollow marsh
#

by computer, you mean the one i'm using to image the sd card?

humble mirage
#

No, the Pi

#

Do you use PiHole/AdGuard or similar?

hollow marsh
#

Neither. As i said, I'm new. I don't even know what those are.

#

I'm sorry

humble mirage
#

That's fine - at least we know you've not shot yourself in the foot

hollow marsh
#

haha

#

ok

humble mirage
#

Unfortunately I don't use HAOS, I don't know why it's failing to get the time, but somebody else will

hollow marsh
#

Alright.

#

Who could you recommend i get in touch with?

humble mirage
#

This channel is the place to post

hollow marsh
#

Oh alright.

humble mirage
#

Somebody who can help will be along at some point - if you don't get a response in a few hours post again

hollow marsh
#

Gotcha. Thanks for the help! I'm glad i got on this. It's my first time on Discord.

trim briar
#

Looking for some clarification with installation, so the recommended method is to either use the HA OS or to use container and then manually install the addons in docker?

#

I was using supervised and I do match all of the requirements listed but it is not recommended so wanted to shift over to a recommended alternative but am confused about add-ons

steel sky
#

If you want things to just work and have a machine (virtual or otherwise) you can dedicate for the purpose, go with haos. If you want to have even more fun and learn a new skill go container.

trim briar
#

I do have a machine but it is serving more purposes than just home automation and it does not have enough system resources for running a VM

#

It's an old laptop from 2016 with 16 gigs of ram but just 4c8t

steel sky
#

Then I recommend container.

#

There are a few straight-to-VHSadd-on services out there, but most everything can be found on docker hub.

hollow marsh
#

I am trying to install HA on my RPI4 and it's hanging up at the preparing screen.

#

I'm not sure what to do. I tried connecting a monitor to the RPI and there's no signal.

steel sky
#

Does your device have internet access?

hollow marsh
#

I believe so, but I'm not sure how to tell. I can see it connected to my router that I'm currently using to provide internet access to the laptop im typing to you from

steel sky
#

Your date is all wonky. That could maybe mess upp the certificate resolutions...

humble mirage
#

It will mess it up

hollow marsh
#

Alright. So I don't know what to do about that.

humble mirage
#

I've seen a few people with that problem - no time sync - but I've no idea how to fix it on HAOS

steel sky
#

Also your clock jumps backwards eight hours at one point.

hollow marsh
#

That's bizarre

steel sky
#

Yeah... is this on a pi?

hollow marsh
#

yeah, rpi4

steel sky
#

You said it was. Never mind

#

🤷 Have you tried turning it off and on again?

hollow marsh
#

Yes, but i can try again.

steel sky
#

I'm out of ideas

hollow marsh
#

Is there somewhere to change the time?

steel sky
#

It should pull that from the internet at boot.

hollow marsh
#

Alright. I've read something about the DNS being weird for some reason.

#

Apparently this was the solution

#

but it talks about connecting a monitor and keyboard

#

I plugged in a cable and there's no signal

humble mirage
#

You only get a signal if they're connected when you power it up

steel sky
#

And on a pi4 you need to plug it into the correct port, iirc.

hollow marsh
#

But there's two ports for hdmi output

high token
#

I think either works or one closest to power is better. something like this. But the problem is definitely what Tinkerer said. Needs to be plugged in before power up or it doesn't detect it

hollow marsh
#

Ok. well i don't have the "official" Pi cable. Could that be the problem?

high token
#

for power or the HDMI you mean?

hollow marsh
#

hdmi

high token
#

you rebooted with the cable plugged in and you still get nothing?

hollow marsh
#

that's right

high token
#

tried the other port too?

hollow marsh
#

no

high token
#

I could be the cable but not that there's an official hdmi cable either.

hollow marsh
#

ok

high token
#

try the other port too just in case

hollow marsh
#

well cable works. I justplugged it into my laptop

#

ahhh!! it worked!!!!

high token
#

magic stars6

hollow marsh
#

yesss!!!

#

i'm going to nourish my body..ill be back!!! you're awesome!!

hollow marsh
#

im back!

#

wait until kernel time is synchronized

#

failed

#

now what?

astral kayak
#

Hi all

#

I finally installed HA in a Oracle VM Virtual Machine

#

HA OS is up and running and I can access the website via browser

#

I installed the Samba Addon and I can copy my old project configuration there via Samba

#

how can I upgrade now the HA version everytime is needed?

#

is there a way with this installation to access the source python files of HA?

humble mirage
astral kayak
#

can I exit from "ha >" prompt on the virtual machine?

humble mirage
#

What do you mean?

crude inlet
#

if you mean escape that to get to the host console, you would enter "login"

astral kayak
#

I mean to exit to linux and navigate the virtual machine files

crude inlet
#

enter "login"

#

you can't make persistent changes to the host system and everything else is running in containers

astral kayak
#

ok now I'm in linux

#

where is the HA installed?

#

that's the path?

humble mirage
#

It's not there

#

It's inside a container

#

What are you trying to do?

#

If the answer is update then you didn't read the link I posted

astral kayak
#

I'd like to change this

#

homeassistant\components\shell_command_init_.py --> COMMAND_TIMEOUT = 36000

#

I need a longer timeout

humble mirage
#

You can't

astral kayak
#

cause of some automations I have...

#

so better if I move to WSL installation

#

this installation is not suitable for me

humble mirage
#

You can create a custom component version of the shell command, and modify that to suit

astral kayak
#

where do I take the source files from?

#

github?

humble mirage
#

Yes

astral kayak
#

I see

#

I copied my old project files

#

how can I restart HA now?

crude inlet
#

Settings > System > Restart in the upper right corner

#

It's the same HA you've been using, but running in a container

astral kayak
#

it's different from the one I'm using

#

I was using HA on Windows

#

The system cannot restart because the configuration is not valid: Invalid config for [http]: not a file for dictionary value @ data['http']['ssl_certificate']. Got 'C:\Certbot\live\XXX.ddns.net\fullchain.pem' not a file for dictionary value @ data['http']['ssl_key'].

#

how can I do with certbot now?

humble mirage
astral kayak
#

ok...

crude inlet
#

remove that config

astral kayak
#

so I need to remove from config file the duckdns config?

crude inlet
#

Invalid config for [http]:

#

C:\Certbot\live does not exist on your system

astral kayak
#

I know... 🙂

crude inlet
#

So remove that stale config

#

so that you can restart

astral kayak
#

The system cannot restart because the configuration is not valid: Integration error: browser_mod - Integration 'browser_mod' not found. Platform error sensor.google_fit - Integration 'google_fit' not found.

crude inlet
#

did you copy over the hidden directories from the main config directory?

astral kayak
#

one sec

#

cloud and storage?

crude inlet
#

yep

astral kayak
#

yes I copied

#

what shall I do?

crude inlet
#

check config

abstract hearthBOT
#

Always run the configuration check command when you make changes. Don't trust the UI check - it misses some problems.

Command '~check' was invoked by: Tinkerer
humble mirage
#

Though in this case, the UI check should catch everything you're likely to have broken

astral kayak
#

I run "ha core check"

#

but still have the same error

humble mirage
#

What error this time?

astral kayak
#

same

#

The system cannot restart because the configuration is not valid: Integration error: browser_mod - Integration 'browser_mod' not found. Platform error sensor.google_fit - Integration 'google_fit' not found.

humble mirage
#

That's not what you'd shared before...

#

That's two custom components you didn't copy over to your new install

astral kayak
#

I shared this one before...

#

I copied them

#

they are in the custom_components folder...

humble mirage
#

Check the top of the log file to see what HA thinks

astral kayak
#

where?

humble mirage
#

Where what?

#

The file is in the config folder, same as it's always been

astral kayak
#

2022-06-03 18:11:24 ERROR (MainThread) [homeassistant.components.hassio] The system cannot restart because the configuration is not valid: Integration error: browser_mod - Integration 'browser_mod' not found.
Platform error sensor.google_fit - Integration 'google_fit' not found.

humble mirage
#

No, the first few lines of the log file

#

That's where it tells you what custom components it finds

astral kayak
#

it's from the initial start

#

one hour ago

humble mirage
#

Can't be, because the first few lines of the file (not visible in the UI) are all about custom components

astral kayak
#

2022-06-03 18:11:24 ERROR (MainThread) [homeassistant.components.hassio] The system cannot restart because the configuration is not valid: Integration error: browser_mod - Integration 'browser_mod' not found.
Platform error sensor.google_fit - Integration 'google_fit' not found.
2022-06-03 18:11:24 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection] [XXXX] The system cannot restart because the configuration is not valid: Integration error: browser_mod - Integration 'browser_mod' not found.
Platform error sensor.google_fit - Integration 'google_fit' not found.

humble mirage
#

So, either:

  1. You're not looking at the file
  2. You're not looking at the start of the file
  3. No custom components were found
astral kayak
#

I'm using the right file

#

and in the folder there are the custom components

high token
crude inlet
# 
2022-06-03 10:19:22 WARNING (SyncWorker_0) [homeassistant.loader] We found a custom integration mass which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-03 10:19:22 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
#

@astral kayak the beginning of your home-assistant.log file would look similar to that

#

note, the log.1 file is the log from the previous run of HA

hollow marsh
#

hello

#

I'm looking for help to resolve my problem being stuck in preparing

crude inlet
hollow marsh
#

i tried it

#

but then again, i'm not familiar with any of this so i could have done something wrong

#

It looked in order to me

#

timesynch fails

#

systemctl start systemd-time-wait-sync.service

#

i try that and it times out

humble mirage
#

Did you change the DNS servers?

high token
hollow marsh
#

i changed it to 1.1.1.1 like the instruactions said

scarlet aurora
#

I have installed homeassistant with docker . If i want to setup duckdns+letsencrypte+nginx what should i include in docker-compose.yml?

humble mirage
#

Depends on how you want to do that really

scarlet aurora
#

i have installed duckdns and nginx without docker. Can they work like that?

#

or they must be inside docker?

humble mirage
#

They can be outside of it just fine

scarlet aurora
#

ok i am trying to understand more about how docker works... thanks

#

it looks very good tool

safe ridge
#

hey, in the past I used homeassistant on my raspberry pi 4. now i wanted more power and installed a new lenovo tiny pc as my new server. old instance and new instace are running docker containers. i thought, that I could just copy the config folder to my new server with scp, start the new container and everyting is working as before.but not at all. everytime i try to visit the frontend i am asked for creating a first user. it looks like i just created a complete fresh home assistantinstallation while the config folder i mapped into my container is exactly theone from my old container. what am i doing wrong? i have so much devices and automations, i really dont want to create everything from scratch

storm sluice
#

if you exec into the container do you see your stuff in /config?

safe ridge
#

jup, its there

storm sluice
#

sure you copied it correctly?

safe ridge
#

i copied it per scp directly from old to new server. is that "correctly"? 😄

storm sluice
#

theres a bunch of hidden folders in there like /config/.storage where all the user config and all the stuff setup in the ui is saved in

safe ridge
#

that's all there

storm sluice
#

check the logs then?

high token
#

I seem to remember people doing that through scp and scp missing some stuff during the move somehow (don't quote me on that though)

#

although even if half the stuff are there I still don't think it would trigger an onboarding. it would just break

safe ridge
#

yeah, its super weird. i always get forwarded to the onboarding process while there is 100% my stuff in the config folder

#

and also in the logs i see a lot of ma devices / SSIDs / integration names etc. so home assistant recognizes my stuff

storm sluice
#

sure your connecting to the correct thing?

high token
#

Make an account to get in. restart again. Does it get you back to onboarding? maybe it's not mapped?

#

hmm but you said you can see them if you exec

safe ridge
#

yes, there is only one instance running and its the correct one

#

if i try to create an account and send the form, nothing happens

#

looks broken overall

#

when i try to send the form for creating a user, the developer console of my browser tells me: "500 Internal Server Error\n\nServer got itself in trouble"

high token
#

you have your files. delete everything and pull the image again

#

make an account first to check that's fine and after move your old /config in the folder

safe ridge
#

makes sense. lets try

#

when i delete the config folder and start the container i can create a user

#

i am forwarded to the next steps of an initial configuration

#

i can go next a few times and then i am on the dashboard of a fresh installation

#

will stop the container now, move my files and start again

#

after copying my files - back to onboarding again

high token
#

are you definitely adding the files in the right way?

#

I mean structure tree wise

#

This should definitely work. Even done it myself

safe ridge
#

i do "scp -r user@old_server:/path/to/conf ./config" while being in the directory of my docker-compose file. and in the file i map ./config:/config and the result is that i can exec into my running container and watch my files under /config. so yeah. i guess thats right

#

How did you copy your files?

high token
#

I never had to move over to a new instance in Container. Just one of my instances is a HA Container. But have in the past pointed the same container to a different volume without issues

#

is the file size of both /config directories exactly the same?

#

to exclude that nothing is missing basically

safe ridge
#

hm, there is sth missing

#

old server: 11,6 GB, 447 items

#

new server: 11,6 GB, 390 items

high token
#

interesting. My guess the difference is in .storage

safe ridge
#

in .storage is a huge diff

old server .storage: 2,1 MB, 87 items
new server .storage: 2,1 MB, 31 items

magic lynx
#

is there an arm64 deb package for the os agent

high token
#

maybe zip/tar it then move it over and unpack

safe ridge
#

yeah thats what i just thought. i will tar the complete config folder, transfer it and untar it

high token
magic lynx
#

i only see a .tar.gz for arm64

safe ridge
high token
#

Hope it works!

high token
#

That's where it would be so I guess they don't build one

grand pivot
#

kinda weird that it's the only one missing a .deb

magic lynx
#

thats what i thought

grand pivot
#

is arm64 different from aarch64?

magic lynx
#

nope

grand pivot
#

then there's an aarch64 .deb there

magic lynx
#

ohh durp

high token
#

Silly me I don't even know what the difference is between one being a .deb and the other version 😅

magic lynx
#

ill try the aarch64 deb

grand pivot
#

I vaguely remember posting here about why they have both arm64 and aarch64 and there was some reason...

#

my sense of deja vu was strong with that one

#

Ludeeus — 11/14/2021
[armhf, armv7, aarch64, x86_64, i386] are what the supervisor uses, it's done to keep it consistent

# 
replacements:
  386: i386
  amd64: x86_64
  arm64: aarch64
#

thus endeth my historical research

magic lynx
#

thanks @grand pivot

hollow marsh
#

my rpi4 time isn't updating

#

any ideas/

#

chrome says, your clock is behind

#

try to open the recommended software window and Synchronising Clock pops up....it loads for a while then fails

high token
#

it's HAOS you've installed right?

#

did you try my suggesting with ncmli?

#

what's a recommended software window by the way?

hollow marsh
#

I stepped back from haos

#

I just instlled 32bit bullseye

#

it wont even sync time

#

it thinks im in april

#

😦

grand pivot
#

Since you're install a 32-bit image, I'm surprised that it doesn't think you're in 2010

hollow marsh
#

Thats what the rpi image recommended to install

#

imager

grand pivot
#

I don't think there's any reason to use the 32-bit image anymore

hollow marsh
#

Ok so scrap it

grand pivot
#

in any case, I suggest going back to HA OS and troubleshoot what is probably a network issue affecting NTP

hollow marsh
#

That makes sense. But i didn't have any further help so i stopped

#

I've been digging around and I can't seem to find an answer

scarlet aurora
#

Homeassistant in docker doesnt see the certificate files from letsencrypt. Should i put a link in docker compose yml?

hollow marsh
#

ok. running HOAS. waiting for kernel time synchronisation

#

failed

#

now what should i do

grand pivot
high token
#

Changing DNS through nmcli is usually the more full proof solution

#

otherwise also try the suggestion linked above with setting the time yourself. But ideally you want it to be able to keep the date uptodate

hollow marsh
#

i updated the time manually. I set the DNS but the save command doesn't work

#

.<

#

/bin/ash: save: not found

high token
#

that would mean you're not in the nmcli terminal

#

you should be seeing nmcli > when you type those commands

hollow marsh
#

oh

high token
#

including save

hollow marsh
#

how do i get to that?

high token
#

did you do nmcli con show to get the name of your connection?

hollow marsh
#

yes

high token
#

and then the edit one?

hollow marsh
#

yep, but it's already correct

high token
#

as in it's already 9.9.9.9?

#

or 1.1.1.1

hollow marsh
#

no, the name

high token
#

right so you did nmcli con edit "xxxx" and that didn't then change # to nmcli>?

hollow marsh
#

now it did

#

i'm rebooting

high token
#

let's see

hollow marsh
#

😮‍💨

#

i also pinged the time site you posted...and i got that it's alive

high token
#

what url did you ping?

hollow marsh