#add-ons-archived

1 messages · Page 10 of 1

placid galleon
#

Looks like EMQX has an idle timeout default of 15 seconds before closing a connection

#

I cranked that to 5 minutes, gonna test a restart now

#

Interesting, wired devices reported state in 15 seconds but it took 45 seconds for the battery powered devices to show state, but they all came back this time

#

@brittle night I think my HA restart time is > 15 seconds and EMQX was closing the connection and deleting the non-retained states from topics without a subscriber left

brittle night
#

Ah

#

Versus mosquito just let them sit there?

placid galleon
#

Not sure what it's default timeout is for a client

#

I think it defaults to 60s

#

Regardless I need to enable retain for my battery-powered devices haha

waxen harness
#

anyone uses the enigma2 addonplugin ?

#

i have 2 questions..... i only have the default card on Dashboard, and what does it mean: change the "service" ?

#

where to ?

#

To change channel you can use your HA services page <-- sorry im new, but, what does it mean ? where is it ?

#

oh, develop mode, ok, got it

waxen harness
#

is there an EPG or TV Program guide out there ? (german one) ?

torpid vessel
#

I recently (3 days ago) installed MariaDB on my HAOS installed on Intel NUC. After reading Frenck's points about SQLite and MariaDB, I want to revert back to SQLite. I'm not fussed about recent history in the DB, so I am looking at re-installing HAOS and then restoring a recent backup. Or can I just remove MariaDB, adjust recorder entry in configuration.yaml, restart/reboot?

brittle night
#

hard to argue against frenck but a lot of us are happy with mariadb with no issues..

#

but to answer your question i believe all you do is remove mariadb in configuration.yaml and lose the 10days of stats or w/e you have them set to

torpid vessel
#

Thanks for that - I didn't know whether the default database would be created

#

and re the discussion about which database, that's the beauty of this place right?

brittle night
#

iirc i saw improvements when moving from sqlite to mariadb

#

but this was a year or two ago and i was on pi4 hardware then too

#

if you look on github and the chatter in #beta bdraco does A LOT of database work to make it better

torpid vessel
#

yeah, I'm trying to find a no-nonsense setup for my folks, so I'm looking for the "most supported" and I guess that's going to be from within

brittle night
brittle night
#

and i'd suggest running it on notapi4 or at least SSD boot if you are planning to use that hardware. but we should jump to #hardware-archived if you want to talk better options

torpid vessel
#

Thanks for the help - I'm off to have a go at the move back. I'll let the channel know how I go. Thanks again

#

Done. It was that easy. I have a full two minutes of History!!

regal wedge
torpid vessel
#

Scroll back to 28/3 or search for frenck in this channel

supple grove
tough delta
#

is the ssl certificate the cloudflared issues downloaded to HA? if so, what is the path? i am connecting locally in some cases using internal dns and not public cloudflared one and believe I need to point my ssl cert paths appropriately. its not in the typical ssl directory

#

maybe a more general question, what is the path addons are installed to using HA OS on RPi4?

bitter skiff
dense sedge
#

Hi! is there any way to use the NPM just like the normal nginx and add reverse proxy rules with location / {} blocks? Or is there a nginx/apache addon?
I just want to use my home assistant alongside emulated hue on port 80 without using a reverse proxy on a secondary host

dusk narwhal
#

Hello! Trying to add the espHome add-on. When I search in the add-on store it's not listed anymore. I read from esp's website that's depreciated and I just need to use the repository or there add-on link. If I try to use the link they provide it rerouts back to HA as normal, but then says add on not found. If I try to use the GitHub repo it gives me this error "can't add https://github.com/esphome/home-assistant-addon, already in store" but right underneath it list that there are no repositories.
My esp32 can easily be found as an integration, but I cannot add as an add-on. Can anyone help?

bitter skiff
#

Yeah, should be there by default, maybe try a dotsvertical -> Check for Updates and then a Ctrl+F5 in your browser

bitter skiff
dusk narwhal
#

@bitter skiff - thanks, I'll give that a try!

errant onyx
bitter skiff
#

Because you also can't run HA on a path other than /

chilly olive
#

Hi, how can I have two devices added via mqtt? I just added a computer via hassagent and use mqtt to entity and i also want to connect my mqtt to supla broker to be able to control the socket. How can I do this?

errant onyx
#

that's rather ... bold of you

brittle night
chilly olive
errant onyx
#

also sounds like maybe mosquitto broker to broker bridging

chilly olive
errant onyx
#

would it not be easier to use the supla integration in HA?

#

but like I said, if you want to do what you said you'll want to search how to bridge the brokers

chilly olive
errant onyx
#

says it's for your account so I'd start there

weary stratus
#

Hi all, my name is Nachetos and I have a question. Most probably it has been answered before and maybe with a bit experience with docker the question is easy to answer. Unfortunately I am not so familiar with Docker. I will describe as precise as possible my issue. I have an armbian based (nanopi) board. I have installed Homeassistant using docker. As it is known, the docker version of Homeassistant doesnt have the Addons option in the webbrowser GUI. I want to add some addons and I know that it is possible to do it adding the containers of the addons using docker..... this is the theory, but how can I do it (comands and files needed)? For example Mosquitto MQTT broker

supple grove
weary stratus
#

that is very helpful..... Thanks Impact

chilly olive
jagged lodge
#

Hello. I wanna install vaultwarden as add-on and set up my own password manager. I wanna know if i will be ably to sync my password between multiple platforms ( such as android , my pc , etc.. ) if home assistant is running on a raspberry pi

#

I just need to be connected on the same network in order for them to sync?

proud skiff
#

Hello! In the HA Supervisor log I see a row about the Lounge add-on (self-hosted web IRC client) which I never installed. The row is this:
KeyError: 'a0d7b954_thelounge'
I am concerned and worried why a log in HA refers to an add-on I never installed. Is this a security threat? 🧐 Thanks for sharing your thoughts on this.

supple grove
jagged lodge
#

for what i understand i need to install also duckdns , create a domain , token etc, port forwarding, etcc, .. and then i set up bit warden on self host environment of the gear

fast sapphire
#

How to set a differenr configuration directory for the unofficial SSH addon? I would like to share it between containers

supple grove
civic hinge
#

Is there a server where i can address issues related to Sonoff LAN integration?

brittle night
civic hinge
#

No sonoff powr320d.

brittle night
#

what a strange product lol

civic hinge
#

Issue is that with their latest Sonoff LAN update in HA. I got cloud warning and my device that is a water pump turned off.

brittle night
#

delete that it has api key right?

civic hinge
#

Thanks

#

Sorry i am new

brittle night
#

they care what channel you are in here

civic hinge
#

Thanks

dusk belfry
#

I installed Home Assistant on my existing Debian server. I set up DuckDNS and it seems to work. I can connect to http:;//<mydomain>.duckdns.org:8123 and it brings me to the login on an unsecure site. I can't seem to get the certs installed to make it work from https. I do not see a /ssl folder. I believe Debian keeps certs in /etc/ssl/certs, but I don't see this one there either. How do I know where or if it's generating the certs? I don't see any helpful logging about that.

bitter skiff
steep mist
#

im having trouble with setting up nginx proxy manager, its not letting me add a poxy for some reason and it keeps saying internal error and its not giving anymore.

steep mist
#

or nginx proxy manager which im currently trying to migrate but not having a great time with it.

dusk belfry
errant onyx
#

I think the duck add-on does do both

gray kettle
#

I've just refreshed my token on github for HACS , because i was using an old token format. but where can i input this new token for HACS ?

viscid orchid
#

HACS is not an addon

gray kettle
#

ah

#

integration.. ?

viscid orchid
#

yes

steep mist
#

I haven't used duckdns like that for a while and use NGINX

#

I just have duckdns addon to automatically change the ip if it do change.

errant onyx
#

I just end up using my own domain with cloudflared and nginx proxy manager

steep mist
#

i went to the log and this is what it spit out.

`QueryBuilder#allowEager` method is deprecated. You should use `allowGraph` instead. `allowEager` method will be removed in 3.0
`QueryBuilder#eager` method is deprecated. You should use the `withGraphFetched` method instead. `eager` method will be removed in 3.0
QueryBuilder#omit is deprecated. This method will be removed in version 3.0
Model#$omit is deprected and will be removed in 3.0.
Duplicate relation "access_list" in a relation expression. You should use "a.[b, c]" instead of "[a.b, a.c]". This will cause an error in objection 2.0
[4/2/2023] [11:54:40 AM] [Nginx    ] › ℹ  info      Reloading Nginx
[4/2/2023] [11:54:45 AM] [SSL      ] › ℹ  info      Requesting Let'sEncrypt certificates for Cert #17: <domain>
[4/2/2023] [11:54:45 AM] [SSL      ] › ℹ  info      Command: certbot certonly --config "/etc/letsencrypt.ini" --cert-name "npm-17" --agree-tos --authenticator webroot --email "<myemail>" --preferred-challenges "dns,http" --domains "<domain>" 
[4/2/2023] [11:55:05 AM] [Nginx    ] › ℹ  info      Reloading Nginx
[4/2/2023] [11:55:05 AM] [Express  ] › ⚠  warning   Command failed: certbot certonly --config "/etc/letsencrypt.ini" --cert-name "npm-17" --agree-tos --authenticator webroot --email "<myemail>" --preferred-challenges "dns,http" --domains "<domain>" 
Saving debug log to /data/logs/letsencrypt/letsencrypt.log
An unexpected error occurred:
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='acme-v02.api.letsencrypt.org', port=443): Max retries exceeded with url: /directory (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8c81b550>: Failed to establish a new connection: [Errno -3] Try again'))
Ask for help or search for solutions at https://community.letsencrypt.org. See the logfile /data/logs/letsencrypt/letsencrypt.log or re-run Certbot with -v for more details.
``` i replaced `<domain>` and `<myemail>` just for this.
errant onyx
#

I mean it looks like you should take a look at the letsencrypt.log

steep mist
#

im currently ssh in and i dont know how to open the log files

dusk belfry
steep mist
dusk belfry
#

Yes, restarted everything. I'm not running on the raspberry pi distro though. I'm just running the testing release of plain Debian. When I look for SSL certs, it seems like the usual place is in etc/ssl/. But it's not creating it there either.

#

I thought maybe if I changed the path in configuration.yaml, that might help, but it didn't. I don't know if it's hitting any write permission problems. I can't see where errors are being logged.

#

If I could actually get my hands on a rpi cm4, I'd do a more standard build using my home assistant yellow. For now, I'm just using an old PC that I set up as a Plex server.

steep mist
#

@errant onyx i figured it out. my dumbass forgot to port forward port 80 ._.

#

i have 443 but not 80

errant onyx
#

oops lol

steep mist
weary stratus
#

Help a brother out trying to get his Zigbee2MQTT add-on to work. I've had ZHA installed previously and wanted to migrate to Z2M and am just having problems with this.

#

I've now installed the Mosquitto broker add-on, created a MQTT local user, set-up the Mosquitto broker integration, installed Zigbee2MQTT, added the MQtt user login to Z2M's config, Z2M seems to also start. But I can't discover any devices

#

e.g. I've got an innr light bulb (RB 286 C-2). I've done the factory reset as it's directed (turn on once, then quickly 6x on/off, the lamp also did a light cycle loop which I guess should signify that's now resetted), but it's not getting discovered

#

wtf am I doing wrong?

errant onyx
#

I'm assuming you're clicking the permit join button to have it be able to pair up?

weary stratus
#

yep clicked permit join all before I did the reset a couple of times

errant onyx
#

any of the other devices work or?

weary stratus
#

work in what sense? I've had to deactive ZHA for Z2M to start so I can't test them, but they're working normally as not smart devices I guess

errant onyx
#

oh I mean for pairing but yeah definitely need to turn off ZHA before you can swap

#

you probably want #zigbee-archived with more specifics as to which dongle and what not too

sinful igloo
#

hi, I'm trying to install mosquitto and I want a username/password for it that is not one of the built-in home assistant usernames. there's a "logins" box on the mosquitto broker add-on configuration page but I can't find any reference material on how you're actually supposed to format what you type in the box.

#

it just says "Logins" and then there's an empty text entry box

errant onyx
sinful igloo
#

and it keeps resetting the box to blank every time I get something wrong, which isn't annoying at all lol

errant onyx
#

It's a list of items

#

You can try to edit in raw yaml if it's giving you trouble lol

sinful igloo
#

oh, a yaml list. the way the text underneath the box is phrased made me think I was just supposed to go
user, password, user2, password2

#

slapping this in there seems to have done something

    password: passwd```

thanks
#

hooray, it's alive

errant onyx
#

👍

steep mist
#

@errant onyx im having 400 bad request for my home assistant still and I dont know how to fix it. it works fine with my other machine connecting from the internet and using NPM as a proxy.

regal wedge
#

Hi. New to HA. Setting up a Yellow PoE today. Tried twice to install the SSH and Web Terminal add-on. The second time there was a popup saying it failed and to check the Supervisor logs. I don't see anything that mentions the add-on or that is obviously labelled as an error.

supple grove
#

Can you share the logs and the popup?

river wharfBOT
#

@regal wedge I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
regal wedge
#

Do I need to install the official Terminal & SSH add-on prior to installing the community SSH & Web Terminal add-on?

viscid orchid
#

no, they're completely separate

errant onyx
#

maybe the ports?

regal wedge
#

I've probably missed a really obvious pre-requisite. 🤦‍♂️
Will try some other add-ons.

supple grove
#

That can't be all of the logs. Also please don't modify them

regal wedge
#

Sorry, Discord was going to truncate as I do not have Nitro.
Where should I get them from please, if not http://homeassistant.local:8123/config/logs with Supervisor selected top right.
Tried the other SSH add-on and that also failed.

supple grove
#

You can use pastebin or similar and share the link. The supervisor logs should tell you something about downloading an addon and so on. If it doesn't there might be something wrong with it and we have to investigate further

regal wedge
regal wedge
#

Home Assistant 2023.3.6
Supervisor 2023.03.3
Operating System 9.5
Frontend 20230309.1 - latest

regal wedge
#

In case it might be relevant... I made a change to /mnt/boot/config.txt earlier, adding dtoverlay=disable-wifi
I don't believe I amended anything else in the file by accident.

marsh pawn
#

hey, ijust moved me os over from virtualbox to proxmox and im getting the following error on the silicon labs addon for my skyconnect

23-04-03 20:01:40 ERROR (MainThread) [supervisor.addons.addon] Add-on core_silabs_multiprotocol can't write options```
#

how can i fix that

#

nvm fixed but just reinstalling the addon

forest sinew
#

Howdy. I'm just setting up HA and running into issues getting data into influxdb... I've got a really basic config and can reach it from my grafana server but HA doesn't seem to be pushing any data in.

#

My Ha configuration.yaml has:

influxdb: 
  host: a0d7b954-influxdb # I have also tried localhost, influxdb, etc
  port:8086
  database: home_assistant
  username: homeassistant
  password: password
  ssl: false
  verify_ssl: false
  max_retries: 3
  default_measurement: state
# This was added just the last restart.. I planned to start with no filters but I thought I would try restricting since leaving out filters wasn't working.
  include:
    entities:
      - sensors.sump_pump_power_meter
waxen harness
#

any ideas why visual code server doesnt get installed ? i cant get it started:

#

oh... no pictures allowed here

#

2023-04-04T13:58:46.324Z] info Wrote default config file to ~/.config/code-server/config.yaml
[2023-04-04T13:58:46.626Z] info code-server 4.11.0 85e083580dec27ef19827ff42d3c9257d56ea7e3
[2023-04-04T13:58:46.626Z] info Using user-data-dir /data/vscode
[2023-04-04T13:58:46.650Z] info Using config file ~/.config/code-server/config.yaml
[2023-04-04T13:58:46.650Z] info HTTP server listening on http://0.0.0.0:1337/
[2023-04-04T13:58:46.650Z] info - Authentication is disabled
[2023-04-04T13:58:46.650Z] info - Not serving HTTPS

#

where do i set up the http server ?

supple grove
lucid blade
#

Has anyone facing issues with StudioCode add on? For me, suddenly it is not starting. I have restored to 5.5.4 - the oldest I have on backups and no success.

waxen harness
#

lol, thats the same as me:D

night pulsar
#

Can I validate in my config.json that a value is a valid base64 encoded 32-byte string?

waxen harness
night pulsar
#

Sorry if I wasn't clear - I don't want to generate a string, I want to validate that the user entered one

viscid orchid
sly kindle
#

@lucid blade @waxen harness 5.5.6 is working for me. Are you waiting long enough for it to get started?

waxen harness
#

i press start

#

and it goes off....

#

lol...now i press start and nothing happens D

#

no log refresh, or anything else, and yes, deinstallation and installtion 😄 noooothing...

past flax
#

is anyone familiar with InfluxDB

frozen heath
#

Tailscale question: Ive just spun up a demo HA instance on a pi and installed tailscale....... When I access HA over the IP address using a browser - its not using HTTPS. Should it be????

supple grove
rough ether
#

Hi I am trying to add HACS to HA core docker. Running the script bloks with the message "hacs.zip: Permission non accordée. Impossible d’écrire dans ‘hacs.zip’ (Succès)". What is wrong with the rigths ?

jaunty moth
#

was wondering if anyone uses mqtt ring with video streaming addon. try to set it up but running into some road blocks

candid basin
#

Hi... i need some expert help... i'm trying to create a influx2 addon and struggeling accross some discrepancy between my life system and my devvelopmentcontainer.

#

cont-init: info: running /etc/cont-init.d/influxdb.sh
/package/admin/s6-overlay-3.1.4.1/etc/s6-rc/scripts/cont-init: 20: /etc/cont-init.d/influxdb.sh: Permission denied

slate trout
#

Hello,
i am currently developing an addon that essentially just launches jdownloader.
i want to show the webui as a side panel using the panel icon.
i configured everything correct (i think) and the addon runs as expected.
the only thing that is not working is that there is no panel icon shown and there is also no switch on the config page to enable the panel icon...

https://github.com/jappyjan/homeassistant-addons

what am i doing wrong?

candid basin
#

the same influsdb.sh is working flawless on my developmentcontainer

supple grove
candid basin
#

thx ... sorry

waxen harness
#

nice, after supervisor update, the Studio Code Server works now

errant onyx
#

o.O

west mortar
#

Is this the best place to get some assistance with the Zigbee2MQTT Addon?

viscid orchid
west mortar
#

Ah, missed that channel, cheers!

strange prairie
#

Hi, does anyone know cups addon that work with apple airprint?

lucid blade
steep zealot
#

Hi all, I've been using MariaDB for a few years now to host my home assistant DB. I've followed recommendation of Youtube channels at the time the built in HA database was rather unstable and had some performance issues. Since then I've lost my data twice (when Maria would not recover from a backup - which still often doesn't work) and had it be more unstable than the basic DB ever was.

#

With all the work put into the built in DB over the last 5-6 cycles, is it time to finally ditch MariaDB for the integrated one?

#

I am not expecting consensus response, but anecdotal evidence between the two would be appreciated.

viscid orchid
#

I switched and haven't noticed any functional differences. The backups now include the database, so they're all bigger...

brittle night
#

i moved back from mariadb this morning without migrating and all is well

steep zealot
#

I am running HA OS VM inside Unraid on an NVME SSD with 4 free cores and 8GB of ram for it

brittle night
#

cool

steep zealot
#

Not too concerned with it being this big as long as backups work.

steep zealot
brittle night
#

there's some posts on reddit / the forum - i have no idea

#

defaults are only 10 days of stats so unless you changed things it doesnt really matter

#

losing 10 days aint shit lol

steep zealot
#

Yeah I mean long term stats not the 10 days of current sensor info

#

The Energy dashboard and other information such as that

brittle night
#

arent those stored in your influx setup?

#

you're talking about migrating mariadb to sqlite not influx right?

steep zealot
#

InfluxDB is a completely different database

steep zealot
brittle night
#

i was under the impression that all long term stats were sent to influxdb including energy etc. I set that up and decided i dont care about fancy dashboards so i just removed it all. i'll let someone else jump in

steep zealot
#

Majority of people don't have influxdb so how would all the basic functionality work if it would have relied on it.

#

If you open your database using any editor your will find tables called statistics

dapper loom
#

Hi
Is that a known issue with 2023.04 that kiosk mode is not working anymore?

plush geode
#

Hi everyone. I'm installing ring-mqtt addon on a new system and for some reason when i try to enter my user and password to receive the token, the submit button seems broken.

#

clicking it does nothing. Anyone ever experience this? I've tried restarting the addon, home assistant itself and even reinstalling the addon.

#

This keeps repeating in the log if it adds any insight.

#

2023-04-06T23:50:29.220Z ring-mqtt WARNING - Unhandled Promise Rejection
2023-04-06T23:50:29.220Z ring-mqtt TypeError: argument val is invalid

woven kindle
#

Hi there. I see there was an update for the Mosquitto broker (6.2.0) and I tried updating it the other day and all my MQTT sensors from Solar Assistant broke. Is there a correct way of updating?

#

Do I stop the add-on, update and start it up again?

#

Because I just clicked update from the "Updates" page

heady saddle
#

Hey everyone. Does someone has Chrony sucesfully installed and running?

bitter skiff
woven kindle
bitter skiff
#

Correct, if you just update via the UI, it'll appropriately stop, update and restart the add on for you

#

So if it's not running now, there maybe an issue with it starting

#

The logs will tell you

woven kindle
#

Ok, I'm going to try over the long weekend. Want to wait a day or 2 before doing anything because I've just updated HA to 2023.4.1 and I don't want to disturb those db optimization updates.

twin glacier
#

Hello guys. I just updated my HASS to 2023.4.1 and my supervisor to 2023.04.0.

I am getting a "500 Internal Server Error Server got itself in trouble" for the ESPHome addon.

I have tried restarting the addon as well as Home Assistant itself

The log files show everything in the addon has successfully started and it is not producing any errors.

The only error I see in my supervisor is "ERROR (MainThread) [aiohttp.server] Error handling request" but I am not sure if it is related or not.

mortal panther
#

Does anyone here know why I might have an issue running Studio Code Server from the android app? When clicking the tab it opens into a black screen. Any idea on how to troubleshoot this?

#

It works when using my HA domain via the web

mortal panther
#

Also, is it normal to not be able to access supervisor logs (HA OS) when performing a full backup?

#

Failed to get supervisor logs, Unknown error, see supervisor logs

scarlet tide
#

Hi, does anyone have Tailscale working properly in HA, when the HA install is HAOS running as a VM inside VirtualBox (v7)?

I can install Tailscale Add-on & it starts up fine in HA, connects fine to my TS network (verified in TS admin console) but I can't actually connect or even ping any of my other TS endpoints.

I have my virtual NIC in VB set as bridged and allowing all traffic and it's allowing "normal" traffic through fine and out to my default gateway, but I just can't get TS to pass traffic - although it is showing as connected (and verified) in the TS admin console, which implies traffic is getting in/out.

Anyone else got this kind of setup working? Thanks.

lean geyser
#

Hi everyone ! I have again problem with add-on repository: if I open "repositories" from the gui is empty, if I try to add the standard repository it said it's already present in the list (I can't see it), when I check for update nothing happen and all the plugin already installe are grey ... now I'm in troble because I upgraded the core and Z-wave is not working because too old 😭 .
Anyone can help me ??

#

Somethimes, in the log, I have the message that github is not reachable, but I don't know why ! the DNS is fine

#

Now I restored the core to the versione 2023.3.6 the last that let me work with my versione of Z-Wave

pearl current
#

I want to have a virtual thermostat that checks a specified temperature sensor value and either fires off specific actions when the target mode changes (meaning it's above the set point for cold or below the set point for heating) or just redirects that to another thermostat control, is there an addon for this?

#

I have 4 minisplits that heat/cool and a central furnace and a bunch of temperature sensors around the house and want to tie them all together

misty atlas
#

You probably don't need an add-on, maybe look at the generic thermostat integration (#integrations-archived channel relevant). You may need to wire up the logic however you want it to work with lots of separate systems like that though

chrome vault
#

on and off I've been trying for months to get this to work.. but I always get this message.. Failed to start add-on Port '8555' is already in use by something else on the host.

#

the only other thing that could be using that port is simply not installed.. and I've rebooted

#

So what does that mean? How can I solve this?

#

format and start from scratch?

#

and meanwhile.. Frigate (Full Access) Beta (0.12.0) Add-on is not running. Please start it first

#

so It's a massive FU.

rare jungle
#

Is possible to configure the ftp addon to work through nabu casa?

#

Or alternatively, a good writeup on how to setup automated config check and GitHub pull?

marsh pawn
#

probably dumb question, but im configuring an add on that says

Please, allow the incoming TCP connection on port 54236 from your HA instance

I'm running ha through proxmox. is this a router thing i need to change or a proxmox thing, or is it something in home assistant intself

errant onyx
#

Most likely just router first and then check the next layers...

marsh pawn
#

figured it out, lmao, it was on the recieving device, my computer

feral shard
#

I am running HA as a virtual machine in VirtualBox on windows and have updated to the most recent April update 2023.4.2. I have 6 Reolink cameras connected to a Reolink NVR using the included integration. All camera's work as expected using a picture-glance but trying to reduce latency I am trying to setup RTSP to Web\WebRTC. When I install the add-on my HA instance freezes and I have to restart the VM. There is nothing in the logs but occasionally I get the following error. I am banging my head against the wall because the add-on works great until it freezes.

rcu: INFO: rcu_sched self-detected stall on CPU rcu: 1-....!: (1 ticks this GP) idle-21b/1/0x40000000000000 softirq=93825/93825 fqs=1

The version of HA does not seem to matter as I have tested back to 2023.1

errant onyx
chrome vault
# 
Port '8555' is already in use by something else on the host.
#

forever and ever after all circumstances

#

time to format

errant onyx
#

o.o

#

why don't you just list what's using the port...

chrome vault
#

how?

feral shard
#

netstat -ltnp | grep -w ':8555'

can you just use a different port on the program you are starting?

feral shard
chrome vault
#

and there's nothing

supple grove
#

Yeah that's something you'd run on the host directly. You can run docker ps inside a container though

chrome vault
#

seems like it's now impossible to run ANY addon on port 8555 because even none is too many

#

not running.. start it.. can't start it.. port taken

#

formatting and starting from scratch seems to be the only option

#

not terribly user friendly :/

chrome vault
#

seems I have to install a version of frigate that home assistant will agree is running on the port without running on the port while it's running on the port/

#

makes me want to kill myseLf.. start it.. can't start it. staRT IT.. CAN'T START IT.. AD INFINITUM.

#

seems this might be a known problem.. just a broken home assistant until it's solved..

manic fox
#

What errors are you getting? Still the port is in use?

feral shard
#

not running start it can t start it port

bronze arrow
#

with Browser mod, if I wanted to recall a security camera to make it appear if for example I have a person passing in front of it .. I tried with the camera function. (path) but it returns me a blank page even if home assistan says that everything is in order.. does anyone know how i should do it??
I managed to do it, but only on the browser of my pc where I installed Home assistant.. Not on the mobile phone or tablet, because the browsermod popup doesn't allow me to choose either the target or the identities.. does anyone know why?

viscid orchid
solid kite
#

When using HAOS, how can I view tasmoadmin "container" I guess..

#

Not the WebUI, I'm talking like ssh into it

sly kindle
#

@solid kite You'd want to use the community ssh addon which allows for docker commands, disable it's protection mode, then use docker exec -it [container-id-or-name] /bin/bash

solid kite
sly kindle
#

Which ssh addon are you using

#

Do you see a protection mode to disable?

#

If you don't then that's the wrong one

#

There are two SSH add-ons

viscid orchid
#

It's the wrong one

solid kite
#

Terminal & SSH

#

So I need SSH & Web Terminal ?

sly kindle
#

Yeah we already know it's the wrong one. Just trying to get you to look harder. You need SSH & Web terminal. Confusing? Yes.

#

It has more features.

solid kite
#

k

eternal island
#

Does anyone know if the addon Emulate Hue still works??

#

I lost more than a day trying to make this work and not sure why it doesn't. I freed the port 80, I can connect. But basically everything that I try to do in Hue Essentials app, I get an error message. Can someone please help me?

clever steeple
#

im having an issue, i installed Samba addon with password and username, and also my router ip address. But i get an error when trying to connect to the server in the network folder. It says that the server may not exist or the ip-address is wrong..?

restive lily
#

Anyone use the grocy addon and the api? I'm wondering how many details you need to create an entry. I'm hoping I can just make them with fodd, location, expiration but from using the front-end it seems like it requires a lot more details than that.

sly kindle
river sluice
#

any idea how much memory I need to be able to spawn vs code server in HA? used to run just fine but some of the recent updates to HA have my memory footprint a lot higher then it was in the past and now I can't get VSCode to start, and I wonder if it's because the host it's running out of memory

#

although after last restart of HA and giving it another gig of memory it still fails to start and the vm LOOKS like it's got plenty of free memory

supple grove
#

Well the addon developer recommends 4G. I'd check the logs of the addon. Probably via the SSH addon and docker logs -f addon_..._vscode
You can install glances and check the memory usage. No point in XYing. Also check docker stats

sour horizon
#

Could I get a hand from anyone familiar with Expander card?

viscid orchid
#

Any card is not an addon

sour horizon
#

The intention is to have the bedroom section in line with the rest

viscid orchid
sour horizon
#

Pah alright

dapper loom
#

hi, how do i get access to download files in File editor out of the /share/motioneye folder?

urban turtle
#

Am I crazy or is there no simple parsimonious way to display a countdown/timer from HA in Appdaemon?

little lion
#

I'm having a difficult time making any sense of getting Tailscale working on my RPi 4b. I setup the RPi using the standard getting started method and it's running the latest version of Home Assistant. I have a Tailscale account and generated the API key and put all that info into Tailscale Integration. I also added the community Add-on for Tailscale and got that going. In the Trailscale dashboard the RPi shows up. If I go on my phone and I'm not on the LAN I can successfully ping the Tailscale URL listed for the HA install but if I try that same URL in a web browser it comes back saying :
This site can't be reached
URL refused to connect

My home network is a Ubiquiti Dream Machine router along with 2 of their hardwired access points. The RPi is connected hardwired.

Any suggestions? I also have Nabu Casa but want a 2nd way into my machine. I've had several situations in the past where Nabu Casa was no longer working but the machine itself was up and running and could be accessed locally. The solution has been a reboot and I'm hoping Tailscale is another way in for recovery.

(note - posted this in #integrations-archived but was told it should be here. Wasn't sure as tailscale seems to be both an integration and an add-on)

nova trail
#

Good Day! Looking for some help with MariaDB and InfluxDB. Basically just added both with basic setup configuration and since then my backups changed from ~60MB to 225MB and growing 70-100MB every 3 days! (all prior backups with HA DB were only growing about 2MB every 3 days...recorder is 90 days)

brittle night
#

Step 1. - go back to SQLite and remove mariadb. Step 2. Realize influx is meant to store data long term and growing backup sizes is your new reality

nova trail
#

Well, I want to store some things long term like my home energy usage. I just don't understand why with SQLite the same data was only growing 2MB/day? Why do you suggest removing mariadb?

brittle night
#

The devs have recently stated SQLite is more optimized so all the old suggestions to switch to mariadb aren’t relevant for 99% of people

#

And your question about db size has to do with influxdb not SQLite

nova trail
#

Is it possible to copy data captured in mariadb back to sqlite so I won't lose those days of history?

brittle night
#

Yes a guy posted how yesterday if you want to search here

nova trail
#

Note that last check of backup, mariadb was the size bandit. In ~800MB tar HA was 68MB, Influx 247MB and Maria 495MB! I will search, thanks!

errant onyx
#

o.O how much data did you set to allow in the recorder? vs for influx

#

my influx tends to be larger than my sqlite and I have fewer things being sent to influx

naive garnet
#

hi , is there a working config for media extractor that works with YT at the moment ?

dawn moat
#

Hello All, I've replaced my coordinator with a new one, and zigbee2mqtt wont restart, it mentions most likely network with the same panId or extendedPanId already exists nearby, where is this as this was removed fron the yaml ages ago

#

Any pointers ?

modest moat
#

I do not use zigbee2mqtt as a HA addon but it is on another machine as a docker container. Its frontend is accessible via http:/ip_of_the_docker_container:port. To see it directly from HA I put panel_iframe: in configuration.yaml. Works great when I access HA locally. When accessing remotely there is an error that says http iframes cannot be opened via https (as that's how HA is being acessed). Recently I used traefik to put SSL on everything inside my network, and so now zigbee2mqtt is accessible inside my lan via https://z2m.lan.mydomain.com/. I put this in panel_iframe and again locally works fine, but remotely ERR_NAME_NOT_RESOLVED. Makes sense as the z2m subdomain is visible only locally. Anyone uses the same type of config and came up with a solution?

urban turtle
little lion
errant onyx
#

huh

hasty pendant
#

When I try to add the 'cloudflared' addon

#

it doesnt show up

#

im adding it by repository

#

nvm got it

crisp heart
#

Is it possible to open an additional port to an Addon ?
i'd like to open the new RTC2Go port (8554) for the frigate addon but the GUI only alow me to open 5000 and 1935

mild ember
#

After a power outage my qcow2 became corrupted. So I setup a new vm and restored a backup. None of the addons will start. Any ideas?

#

Even after reinstalling them

sly kindle
#

@mild ember reboot the vm so everything gets started correctly.

#

settings > System > power icon in the upper right corner can do it from within HA

#

click on advanced options, then reboot

mild ember
#

There was no change unfortunately. Im adding all the addons first then restoring

sly kindle
#

did you restart HA or reboot the vm?

#

restarting HA only restarts HA and doesn't touch anything else

mild ember
#

Yes I restarted the host

sly kindle
#

ok

mild ember
#

so then I tested with a single add on then restored and that addon would start. Rest wouldnt.

#

So im restoring now and we will see if the addons work again. Il do another reboot though.

mild ember
#

@sly kindle I think all is good.

desert lagoon
#

I’ve installed 2 add-ons(Tilebord and VSC) and whenever I try open either of them I get a bad gateway 502 error

supple grove
#

Check the addon logs

indigo palm
#

My file editor add one is showing 401: unauthorized all of a sudden

#

How can i fix this

errant onyx
#

try opening the ui again from the add-ons page

#

and/or restarting it

neat birch
#

Hey guys,
Been trying to get HA add-ons to work, but can't seem to find a copy of HA that runs the supervisor mode.
ended up using "http://192.168..**:8123/hassio/system/info" to get a message back that said - "Could not load Supervisor Panel!
Followed the promts which led me to the discord.
Am running Home Assistant 2023.4.4 through Docker on a Synology and would love someone to point me in the right direction. HASO version - supervisor.
End reason for HA is to run ESPHOME.

viscid orchid
#

You can't use addons with a docker install

#

You can run ESPHome without HA at all

neat birch
#

That totally explains my last week.. lol

viscid orchid
#

There's a table on the HA installation page that would have cleared that up

neat birch
viscid orchid
neat birch
#

Dived deep, but didn't see the table. 😦

viscid orchid
#

There no need for any of that if you just want to run ESPHome

neat birch
#

Appreciate the direction. I like HA, and wanted to integrate both HA and ESPH.

viscid orchid
#

What you pointed to is a virtual machine install of HAOS, which does support addons

neat birch
#

If I swap out Docker for VM, it should work then?

viscid orchid
#

That is not what you wrote above, though

#

Yes

neat birch
#

Thank you.

#

Appreciate the help

weary stratus
#

i would like to add a virtual numpad on home assistant to use to enter numbers into the input boxes how can i do that

weary stratus
#

Hello, I tried to find a way to edit DDFs for the deCONZ HA Addon for Hassio. Could you please indicate what is the appropriate way to edit/upload DDFs as there is not direct access to the /config dir. #deconz

mortal panther
#

Any frigate experts here? I'm having issues with ffmpeg process constantly crashing and I'm trying different stream methods and wanted to see what you recommend.

viscid orchid
wicked thistle
#

I don't want to shill my addon (iSponsorBlockTV - block youtube adverts on apple tv) but I also don't want people having no idea it exists and being forced to reinvent the wheel

#

I made a forum post, do I need to add it anywhere else like some sort of "Awesome List" or anything else?

rugged granite
#

if i'm using Home Assistant OS (in VM).. do I need to use "InfluxDB 2 auth" influx connection option to be able to downsample data?

livid tree
#

Hi guys, i'm trying to install ESPHome addon. Once the install finishes successfully I'm clicking the start button and after a while it says it fails. When looking at the addon logs it says it was started successfully. But this way i'm not able to open the UI link (I still see start button). I also tried to uninstall and start all over again and restart HA. nothing helped.
I'm on 2023.4.2
Appreciate your help...

snow stag
#

Idk. Im rolling back to 2023.4.2 becouse 2023.4.4 broke whole esphome. Every device offline by import error.

novel plank
compact terrace
old drift
strong shoal
old drift
#

23-04-16 22:10:04 INFO (MainThread) [supervisor.store.git] Cloning add-on https://github.com/MickMake/HomeAssistantAddons repository
23-04-16 22:10:11 INFO (MainThread) [supervisor.store] Loading add-ons from store: 70 all - 1 new - 0 remove

#

This was from the last attempt. Could it be that it takes ages to load and I'm not waiting long enough?

strong shoal
#

I'm still learning HA myself, was hoping the log would have hinted at an issue, but nope.

#

I'm not sure tbh, maybe one of the more knowledgeable guys may be able to help.

old drift
#

it actually doesn't look like an error, but in the instructions it says "Scroll down the page to find the new repository, and click the new add-on named you want."

The category "MickMake Hass.io Addons" never appears.

#

Thank you @strong shoal

strong shoal
#

What version of HA are you running?

#

Stab in the dark, but maybe the addon is made for older HA than your running.

old drift
#

Home Assistant 2023.4.4
Supervisor 2023.04.0
Operating System 9.5
Frontend 20230411.1 - latest

#

todays

#

if you add the repo does it populate your addon library?

strong shoal
#

I'd try but not actually got a HA instance running right now.

old drift
#

ok, thanks anyway

#

Ok, i waited about 10 minutes, and a browser refresh was the answer. Such a noob. Thank you Bass Ape for helping out

molten gale
#

Hi, does somebody has expirience with the pschmitt flic button repository? I added it to the Add-On repository but i cant find it

#

it doesnt appear anywhere

halcyon saffron
#

i recently started using proxmox backup server and zfs on it but i can't really find anything that lets me check status of backups in HA, if they ran, if everything was ok, if the zfs pool is good or degrated etc etc. Anyone how of any plugin ?

split drum
#

Is there a way to use the AddOns store on the docker (container) version? I'm using the latest one, following closely the instructions, and everything works fine, but I can't find a way to enable the store 😦

brittle night
#

Nope

#

You have chosen diy hardmode

split drum
#

Thanks! So which route? Install rp os, and then building HASS?

#

any pointers are much appreciated.

errant onyx
#

if you want easy route just use the HAOS image for your pi

split drum
#

From what I read, HAOS is no longer compatible with Pi Zero as of version 8.5...

#

some networking issue

brittle night
#

You’re the second pi zero guy today lol

errant onyx
#

lol

split drum
#

😦

#

can I at least access my configuration.yaml file with my docket build?

#

i can ssh do the device

distant nova
#

I installed the Plex Server add-on. It's running, no errors in the log but I can't open the webui. I'm also using duckdns to reach my HA from everywhere. Someone knows if I have to do something to Plex work? If I use the IP address, the webui opens but it shows that the connection is not safe

coral lotus
#

Hello, trying to build an addon. I have been trying to setup the dev container in vs clde. For some reason, the on boarding is stuck after the statistics view. I tried cleaning cache, using another browser (Firefox). Tried pruning everything in docker. Tried on different systems (win11, Ubuntu). Did not see any relevant logs from the command.

Not sure if anyone is having the problem. I tried to pull add-ons that have a dev container config with the same result.

viscid orchid
agile scroll
#

Anyone here that knows alot about ZeroTier and DNS?
I have 3 instanses of HA at home and one in the cabin.
My main HA at home run most of the things. But HA2 and HA3 is running AdGuard Add-on.
I created an account at ZeroTier and added all 4 HA servers, and my Android phone.
I can now access all servers through IP address.
If I allow ZeroTier to use AdGuard DNSs I asume they will serve the Internal IP, and not the ZeroTier IP. And there by fail if I'm not at home.
Would it work if I set up DNSmasq on HA1 and add the enties för my HA servers, and point ZeroTier to that DNS Server?
Will HA1 get in trouble to reach other resources in my local network, like by BlueIris server and so on? Do I need to add the records for all local resources as will in the DNSmasq server?
I can't set my AdGuard servers as Upstream servers for DNSmasq, as the serve the same domain, can I?
If I ask my AdGuard server for the IP of HA1.mydomain.com I get 192.168.1.x but if I ask DNSmasq for the same server I would like to get 172.22.211.x
But then no matter which one I ask for blueiris.mydomain.com I would like to get 192.168.1.y in both cases as I to day get when I ask AdGuard.
Am I way out, and totaly wrong in my thoughts?

errant onyx
#

sounds really convoluted...

#

why not have multiple DNS servers and sync the settings instead or something

brittle night
#

I want whatever drugs he’s using

agile scroll
errant onyx
#

you're probably best off drawing yourself a diagram of which DNS server serves what and to whom... and then just making sure those DNS servers get handed out appropriately by what ever you're connecting to

#

not really an add-on question. more like overly complicated networking

#

imo keep it simple

agile scroll
#

Anyone know if I could put in the parameter for listen-address in the DNSmasq add-on?

errant onyx
#

what is ... "it"

patent mica
#

can anyone tell me what i would put in here to increment my helper value by +10 every time i hit this button on my stream deck? - https://i.imgur.com/7ZjlGp7.png

errant onyx
#

doesn't look like there's an option for the service. but you could configure the thing to increment in steps of 10

restive lily
#

anyone use the scryped addon? I'm trying to figure out where the config folder is. I'm hoping to move scrypted to a different server because my HA keeps crashing and that is the only major change I can think that I've made recently.

dapper loom
#

hi, how do i get access to download files in File editor out of the /share/motioneye folder?

supple grove
livid tree
#

Hi guys, i'm trying to install ESPHome addon. Once the install finishes successfully I'm clicking the start button and after a while it says it fails. When looking at the addon logs it says it was started successfully. But this way i'm not able to open the UI link (I still see start button). I also tried to uninstall and start all over again and restart HA. nothing helped.
I'm on 2023.4.2
Appreciate your help...

dull nexus
#

Hi, I just did a restore from a full backup on my raspberry pi 3b+ and and the restore was succsesfull. But none of my addons are working anymore. Cannot start the addons, for example the file editor wont start, nothing in the logs suggesting it shouldnt start. Did a reinstall of the file editor addon but still wont start

#

Anyone know what I can do?

#

Also did a restart of home assistant with no success. Trying a reboot of raspberry pi now

#

A reboot fixed it.

weary stratus
#

muy buenas tardes a todos.

#

me gustaría saber si puedo hablar en mi idioma natal?

viscid orchid
#

In English, please

#

this is an English-only server

weary stratus
#

perfect. thank you

#

dear new friends, here is my first question:
I just installed the masquitto broker plugin. I have not seen it difficult. but at the time of starting it does not let me.
What I can be doing wrong?

finite bough
#

Hi, just wanted to ask if there is any way to use wake on lan via homeassistant

bitter skiff
finite bough
#

Thx lmao i should have looked a bit longer

brittle night
finite bough
teal crater
#

I'm running HAOS. I have an add-on that uses a python library, and I reported a bug with the add-on that is caused by the python library. The dev would like me to test the fix before he merges it. Is it possible to access and modify a python library on HAOS (using SSH or SMB)?

tight surge
#

Hi, I am running the nginx addon successfully for HA, encryption end to end via Cloudflare. I was wondering if I could use the same nginx instance to reach another host (in this case OpenSprinkler) via a different domain or path. I can see the customize.servers option, but can't find documentation on this addon except for its use for Home Assistant itself.

plucky verge
#

Hi everyone!

i see, there are already open issues on github and it has been addressed here as well. I would love to use Grocy and the ios app from the appstore. I have like everyone else the problem that I get a 401 error. does anyone have a solution?

bitter skiff
plucky verge
bitter skiff
#

you'll have to paste it somewhere and post the link here

plucky verge
#

Well.. yeah hahaa

Verbidung mit Server fehlgeschlagen.
Server: http://xxxxxxxx:8123/api/hassio_ingress/xxxxxxxxxxx/api

Fehler: hassError (error:
Grocy_Mobile.APIError.hassError(error:
Grocy_Mobile.APIError.errorString(description: "Invalid response to Home Assistant Request. Are you authenticated?")))

bitter skiff
#

🤷‍♂️ That in itself doesn't convey a 401

plucky verge
tight surge
paper karma
#

Hello all,

I have HA on an Intel NUC and among other things I have the deconz add-on installed.

How can I now access the instance of deconz via SSH?

SOLUTION to copy DDF files to deconz Container:
So for me the following way works to copy DDF files to the deconz container:

  • List all containers and search the ID of the desired container.
  • Then copy the file to the desired directory of the container
  1. docker container ls
  2. docker cp soureFile dockerID:/data/core_deconz/.local/share/dresden-elektronik/deCONZ/devices

The copied DDF file can then be used with the deCONZ software for a device.
So it should also be possible to copy files into other containers

wanton mortar
#

Hello everybody!
Is there a way to backup/export the data of the influxdb add-on, so that I can import it in another influxdb instance? I am using HASSOS, but I don't know how to SSH into/start a shell in the influx container (which I think is running), to export everthing. I also tried to connect to the influxdb-instance from my local machine, but no luck yet. I am thankful for every pointer you might be able to give me!

rotund steeple
#

sinds an update from the ha os today my mqtt server wont start i get:

[17:29:07] INFO: Starting mosquitto MQTT Server...
1681831747: mosquitto version 1.6.4 starting
1681831747: Config loaded from /opt/mosquitto.conf.
1681831747: Opening ipv4 listen socket on port 1883.
1681831747: Opening ipv6 listen socket on port 1883.
1681831747: Opening websockets listen socket on port 1884.
1681831747: Error: Unable to create websockets listener on port 1884.
#

I already restarted ha

#

I'm using MQTT Server & Web client Current version: 1.2.0 (Changelog)

tame atlas
#

For me the Zigbee2MQTT add-on won't start anymore.

rotund steeple
ruby musk
#

@rotund steeple are you using the latest version of the MQTT add-on?

#

Hm, you mention the latest version above, that would be 6.2.0 though

restive lily
#

anyone know how I can access an api hosted in an addon through ingress? I'm getting a 401, can I create a token that gets passed in a header or something?

tame atlas
ruby musk
#

Not sure about Zigbee2MQTT. What is it's log saying?

tame atlas
#

Nothing much:

info 2023-04-18 17:31:55: Logging to console and directory: '/config/zigbee2mqtt/log/2023-04-18.17-31-54' filename: log.txt
info 2023-04-18 17:31:55: Starting Zigbee2MQTT version 1.30.3 (commit #unknown)
info 2023-04-18 17:31:55: Starting zigbee-herdsman (0.14.103)
info 2023-04-18 17:31:58: zigbee-herdsman started (resumed)
info 2023-04-18 17:31:58: Coordinator firmware version: '{"meta":{"maintrel":"1 ","majorrel":"7","minorrel":"1","product":9,"revision":"7.1.1.0 build 273"},"type":"EZSP v9"}'
info 2023-04-18 17:31:58: Currently 60 devices are joined:

And so on.

Only warns are:

warn 2023-04-18 17:31:58: permit_join set to true in configuration.yaml.
warn 2023-04-18 17:31:58: Allowing new devices to join.
warn 2023-04-18 17:31:58: Set permit_join to false once you joined all devices.

ruby musk
#

For me the Zigbee2MQTT add-on won't start anymore.
From the log it seems it started.. Why do you mean it "won't start anymore"?

tame atlas
bitter skiff
tame atlas
#

When it went wrong I tried to restore a backup.

#

That didn't change the problem.
Operating System was still 10

bitter skiff
#

So... you did recently restore a backup?

tame atlas
#

Yes, after the problem started

bitter skiff
#

After you do that, you need to fully restart the host (not just a normal HA restart) for the addons to fully come up

remote marlin
#

when trying to send a notification through HA to hass agent, on my laptop i get the following error, while on the desktop it works like a charm.

Stopped because an error was encountered at 18. April 2023 um 18:52:18 (runtime: 0.03 seconds)

'NoneType' object has no attribute 'options'

#

any idea why that happens? i cant see any error, they are both freshly added to HA again

ruby musk
tame atlas
#

This is not the problem. I did that allready.
Now when I pushed START again all the devices are not found.

#

All I see in the logfile:

info 2023-04-18 18:59:14: Logging to console and directory: '/config/zigbee2mqtt/log/2023-04-18.18-59-14' filename: log.txt
info 2023-04-18 18:59:14: Starting Zigbee2MQTT version 1.30.3 (commit #unknown)
info 2023-04-18 18:59:14: Starting zigbee-herdsman (0.14.103)

And this in the logbook ( add-on ):

Error: Reset error: Error: {"sequence":-1} after 10000ms
at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:298:23
at Queue.executeNext (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)

bitter skiff
remote marlin
#

lol he was refering to me. lemme see. where is it located?

bitter skiff
#

/config/home-assistant.log

remote marlin
#

would that be the same path on core too? super new to linux, sry

bitter skiff
#

Whereever your config file is stored

#

That's where it is

remote marlin
# 
backups             configuration.yaml.save  home-assistant.log.1      home-assistant_v2.db-wal  tts
blueprints          custom_components        home-assistant.log.fault  scenes.yaml               www
configuration.yaml  deps                     home-assistant_v2.db      scripts.yaml```
bitter skiff
#

home-assistant.log

remote marlin
# 
2023-04-18 18:53:03.504 ERROR (MainThread) [homeassistant.components.automation.neue_automatisierung_6] Error while executing automation automation.neue_automatisierung_6: required key not provided @ data['message']```
bitter skiff
#

Paste it on a code sharing site and share the link

remote marlin
#

nah it was just me being to dumb to use nano

#

now completed the error log excerpt

bitter skiff
#

So you didn't give it a message?

remote marlin
#

i did

#

however i have an idea what could be the case... let me duplicate the automation

#

i suspect a bug in HA there. ha flushes the message field, when you change the "notify recipient"

#

maybe when doing so and replacing it, the message (even if refilled with a new value) doesnt properly get stored

#

just an assumption tho

#

nope, still failing

# 
alias: Neue Automatisierungxxx
description: ''
trigger:
  - platform: time
    at: '19:11:00'
condition: []
action:
  - service: notify.stephanlaptop
    data:
      message: messagehere
      title: titlehere
mode: single
tame atlas
remote marlin
#

still gives 'NoneType' object has no attribute 'options'

#

as said, when i rename stephanlaptop to my desktop pc name, it works fine

neat rover
#

I'm using Glances but the cpu and memory consumption for addons differ a lot form the overall usage, why is that?
https://imgur.com/a/QfZ6I8N

remote marlin
#

well - i just can repeat what robert_nl said for his case

#

A complete restart (of HA) has been succesfull.
Strange but true.

#

apparently HA had some hickup

neat rover
spare depot
#

I had the terminal add on installed and had not used it in a while but last time i did use it worked. Now its working but the screen has all the text in scrambled like it has a bad signal on TV 🙂 - I uninstalled it and reinstalled and get same thing. Running on HASSOS on PI.

spare depot
#

Fix: Use Chrome

brittle night
#

was your issue above while using firefox?

spare depot
#

yes

#

which i don't use unless forced to

brittle night
#

you're talking about chrome now?

#

why wouldnt you use firefox

#

chromium is a fuckin plague on the web lol

spare depot
#

im saying i was forced to use chrome to get the terminal app to work.

#

I only use firefox or variants of firefox but this add-on breaks with firefox.

brittle night
#

yea didnt quite read like that i just assumed that is what you were saying

#

are you sure it isnt caching related?

spare depot
#

i don't think so i had never connected to HA on this box as I am now isolating my configuration environment from my primary network.

brittle night
#

i see

spare depot
#

So its new setup.

#

don't have time to troubleshoot as I have to get a few other things working before i leave that I want HA taking care of while I am away.

brittle night
#

i dont think of home assistant as "set it and forget it"

spare depot
#

Yeah if you want that you would have to go with something from Google or Amazon right?

brittle night
#

i'm not sure if i agree with that either

#

it's not that home assistant breaks, it's that i go out of my way to tie MORE of my life into home assistant

#

like waking up in the middle of the night to piss cuz apparently i'm old now and then figuring out how to automate based on my presence walking in my room in certain areas to turn leds on under my bed

#

etc etc

spare depot
#

Ahhh I see.

rugged granite
#

how do I get flux script to downsample data?

rustic portal
#

hey im having an issue with the mosquitto mqtt add-on

#

23-04-18 23:06:57 warn: MQTT: reconnecting
23-04-18 23:06:57 error: MQTT: connect ECONNREFUSED 127.0.0.1:1883
23-04-18 23:07:08 warn: MQTT: reconnecting
23-04-18 23:07:08 error: MQTT: connect ECONNREFUSED 127.0.0.1:1883

is what i keep getting when i try to connect with Double Take

remote flame
#

Hi I am having an issue with Adguard atm where I have a block list with this rule in: ||youtube.com^$ctag=~user_regular

#

I have set up my devices and it is tagged with the user_regular tag

#

although, if I go to youtube, I get the 'No internet' error and I have to retry

#

In the network tab I am getting the following error: NS_ERROR_UNKNOWN_HOST

odd cargo
cold scarab
#

Is anyone having issues with MotionEye after the recent HA updates?

rustic portal
fathom mural
cold scarab
fathom mural
fathom mural
cold scarab
#

has it been released yet?

#

Ahh yes it has

#

well it fixed the problem, but now the config UI seems a little broken

brave turtle
#

Is anyone able to help with frigate ?

viscid orchid
rugged granite
#

can an addon install another addon?

viral fractal
#

Hello together. Maybe someone is able to help: Does anybody know if there is support for HB-RF-USB-2 on Home-Assistant Yellow with the RaspberryMatic Add-On? According to the logs the device is not found in my setup :/

#

According to the RaspberryMatic documentation it should be supported. I am trying to find out why it is not working on my machine

weary stratus
#

I have a problem with an SSL certificate.
but i can't find a solution.
can someone help me?

bitter skiff
#

You'd have to convey the problem first

weary stratus
#

I get the error in the home assistant app and in the web browser: deceptive site ahead

bitter skiff
#

Ah DuckDNS? You have to report it as misclassified to Google I believe and then wait a few days

weary stratus
#

Ok Thanks i go try it

gusty turtle
#

How does Home Assistant do time while in config, either yaml, or the UI configs? Such as if theirs an input where you put a number (and there is no hints or explanations on what to put in the input/field), would I default to seconds or... what?

I ask this, because I'm trying to configure an addon: Network UPS Tool, and in the field in the configurations on the UI: "upsmon_deadtime", you put a number, but idk if I should put "25" (for minutes), or would it be "1500" seconds (which equals 25 minutes)? I'm trying to do 25 minutes.

ionic carbon
gusty turtle
#

Woops, I thought the time was minutes for NUT stuff. Didn't realize it was seconds.

#

When I was reading online... not from the offical docs.

supple grove
ionic carbon
gusty turtle
#

Aside from the oops of me thinking 25 minutes. A question still lingers: What kind of time-format does Home Assistant use like if you're doing some kind of 'time' edit in a config. like 10 minutes. Would you do it in seconds?

Plus, for addons and integrations, would they follow whatever time-format HA uses? Or can an author change the format with the coding that HA uses for addons and integrations? Hope that makes some sense.

ionic carbon
#

There is no concept of time-format in this case, we take inputs and manipulate text files

gusty turtle
#

Oh I see

ionic carbon
#

There is also no link between HA itself and the addon running, it's a seperate container

gusty turtle
#

Ah, ok

tepid cape
#

is this the right place to talk about esphome? i've got some gosund plugs that i flashed with esp32, but on a couple i didn't set captive_portal, and the wifi changed.... they have access points and i can connect to them, but there's no web interface, 192.168.4.1 doesn't work....

brittle night
river wharfBOT
tepid cape
#

thanks dude, good bot!

inner holly
#

Trying to get the LetsEncrypt add-on working with Google DNS. The logs keep indicating a failure due to a lack of a TXT record for verification purposes. Where am I able to see what the expected value is?

upper lichen
#

Probably a stupid question but where is the mosquitto.conf file supposed to be placed when using the Mosquitto AddOn? I made a new folder in config called "mosquitto" but it doesn't seem to load or even see it, trying to add an external Cloud broker as a bridge.

viscid orchid
#

Did you configure the addon to use it?

upper lichen
#

It's already set to active and the folder option says "mosquitto"

#

I haven't changed anything there tho, it was always set to active for some reason and the default folder option was also that

viscid orchid
#

Ok. I don't use the addon, but I was able to bridge to cloudMQTT a long time ago

upper lichen
#

Yeah I'm trying to use HiveMQ cause I only need a few external sensors and relays to be controlled. First thought about using a constant VPN connection but that's a bit overkill for that use case.

#

Seems like it literally is in /share/mosquitto/mosquitto.conf which is... odd...
And despite the log saying that it's loading the file it doesn't seem like anything is coming through when I send test-payloads.

#

Actually... it does seem to connect, at least the HiveMQ Dashboard tells me a client connection has been established. But I can't seem to get any topics to go through.

upper lichen
# viscid orchid Ok. I don't use the addon, but I was able to bridge to cloudMQTT a long time ago

How does your bridge work? So far it seems I got the connection running but when I send payloads they just don't see each other somehow...
I even added topic # both 0 and it won't work, so something definitely isn't working quite right yet. I should just be able to see each other's messages being sent on either side, or am I understanding something wrong about how MQTT supposedly works?

viscid orchid
#

It was a long time ago and I'm not using it anymore

upper lichen
#

... just saw in logs that apparently the cloud connection runs into a timeout

#

Ah yes I freaking love crucial info being buried in user forums, cause apparently HiveMQ does NOT support try_private true

bleak grail
#

Is there a way to downgrade a hassio addon? newest esphome isn't compatible with one of my critical external components. I don't have a backup 😦

marsh pawn
#

is there an nginx add on that allows me to add subdomains other than the one by frenck (says it requires mariodb, dont have)

floral quail
#

Hi, What are you using to monitor home assistant componement ? Like Add-on crash or integration crash some stuff like that ?

bitter skiff
#

There's a built in watchdog you can enable to restart crashed addons

floral quail
#

Can we set it to send alert ?

visual stream
#

Hi, I am trying to start the nginx addon but it says port 443 is in use. when i check the ports with netstat i cant find any application using the port.

bitter skiff
#

Do you have a SSL cert setup in HA?

bitter skiff
visual stream
bitter skiff
#

Yeah... well that'd be why then

#

HA is using 443

visual stream
#

i see. is there a tutorial on how to change the https access from HA to nginx?

bitter skiff
#

Hmm, sure you, you could search and I'm sure there may be some things you can piece together. To take off SSL from HA though, it's removing the cert file paths from your http: integration in configuration.yaml and restarting HA

#

That'll get you back to port 80

#

then nginx should be able to start

#

then just follow any other tutorial for setting up the proxy

visual stream
#

thats the thing i did delete the http entry with the certificates in the configuration.yaml

#

still it doesnt start

bitter skiff
#

Did you restart HA?

visual stream
#

yes

bitter skiff
#

does that work?

#

actually... if you hadn't modified the port on the http integration... it wouldn't have been on 443, I guess I assumed but that's not a good assumption

#

If you did modify the port to 443 there though, then it'd just be running HTTP over 443, which obviously still would cause what you're seeing

visual stream
#

i have to check its pretty confusing https is not working

bitter skiff
#

If you can console into the host try a netstat -plnt | grep 443

#

You can do it from an add-on too, but it won't likely give you details of the actual process

#

Could also try docker ps on the SSH community add-on w/ protection mode disabled and see if it shows up there

stable fern
#

hi, Im trying to get audio to work on my camera streams but I am having some issues with the setup

#

I tried setting the host URL to http://localhost:1984 but when I do this the cameras which I have setup before using the "Generic Camera" intergration all stop working. And when I try to add a new "Generic Camera" following the method in the video, it will give "Timeaout while loading URL"

tardy wyvern
#

Anyone use Proxmox + Frigate + Coral USB, or have thoughts on the Frigate Addon now that there is support for network drives?

void prawn
#

I built my own mmwave sensor and PIR sensor using one xaio ESP32-C3 chip. The mmwave sensor worked flawlessly until I programmed in the PIR sensor. Now the PIR sensor is the only thing working. I am assuming I have the programming of the PIR in the wrong place. Would this be a good place to share my code via pastebin?

bronze garden
#

Hi, anyone have experience with bluetooth proxies? I am having some issues with the proxies showing up in home assistant integrations but not in ESPHome.

restive lily
#

anyone use nginx proxy manager with an access list / basic auth?

tardy wyvern
#

Anyone use Frigate w/Coral, either in docker with integration addon, directly as HA addon, etc? I'm trying to follow guides but even as a technical person they are all like a foreign language that make no sense. Even the HA addon just starts up bare and tells you to do things, assuming you know how but not providing any info on it.

river wharfBOT
#

@tribal condor I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
tribal condor
bleak lion
#

I made my own addon using a docker container, which works and runs fine via a web gui.
I've noticed that every now and then the settings all get reset I think it's with every os update or something. Any clues as to what may be causing it?

#

Thanks y'all!

supple grove
summer tendon
#

Hello,
I am new here and I am running a HA with a Rasb.
Now I have a Hoymiles inverter connected via MQTT via an Ahoy-DTU, since today I have a second Hoymiles connected and it is displayed by the Ahoy-DTU.
How do I do that now best that the second inverter is displayed via MQTT in HA?
Do I have to delete the integration MQTT again and set up again so that the 2te is recognized or is that easier?

bitter skiff
#

You shouldn't need to delete anything. Once your second device publishes via a separate MQTT topic, HA should pick it up

summer tendon
#

when I want to add a 2nd MQTT, the message "Already configured. Only one configuration possible"

bitter skiff
#

Yeah, you only need the 1 integration

#

It'll discover your entities from your MQTT broker

summer tendon
#

Thanks for the help, found the error.
I had to resend the discovery config in the MQTT config part of the Ahoy DTU, then the 2nd inverter was visible in the HA.

terse vortex
#

hello guys, I've been trying to get rhasspy (addon (not the junior version)) to work. But i am not able to connect a usb mic to the setup. I got two usb mic devices one microphone and one usb sooundcard (both super cheap) to experiment and they are both not collaborationg. I'm running HA OS on a RPI4. On the Hardware page both my mics seem to be recognised but Rhasspy doen't seem to load them. I googled this and most posts don't really solve it there are just workarounds by connecting the mics remotely and such. Does anyone have any input?

fickle hound
#

Is it possible to access samba server/share external?

#

Nvm, that would be insecure i guess. Think i might use ftp then

bitter skiff
#

FTP alone is also unencrypted

fickle hound
#

I thought samba is without password for a sec but it is with pass.

fickle hound
bitter skiff
#

Over the internet?

fickle hound
#

Yeah

bitter skiff
#

At least use SFTP if you'll be exposing it over the internet

fickle hound
#

SSL you mean?

bitter skiff
#

Well... SFTP is FTP over an SSH tunnel

fickle hound
#

Oh

#

Thought i just use the ftp addon

#

Whats the best way to set it up then

bitter skiff
#

There's also things like NextCloud and whatnot that's more of a Google Drive that's self hosted

fickle hound
#

Thanks 🙂

supple grove
#

Another (and my preferred) choice would be to use something like tailscale and don't expose HA to everyone. In that case it doesn't matter that much what you use

bitter skiff
#

Yeah, if it's reasonable to set up a VPN, that'll be yet even more secure

gusty turtle
#

On ESPresence, in the UI settings, what is "Absorption"? And how would I use it?

brazen sluice
#

anyone use the ewelink add-on??? I am having problems installing it.

waxen vector
#

My zwave js quit working, and now my addon store is blank

#

Only has esphome stuff in it

#

and my installed addons no longer have images

#

my hass box has internet and a valid ip

solid pelican
#

I have a problem with Mosquitto Broker. I'm using Zigbee2MQTT and it can't connect to server: mqtt://core-mosquitto.
This is log error:

Zigbee2MQTT:info  2023-04-23 13:10:37: Zigbee: disabling joining new devices.
Zigbee2MQTT:info  2023-04-23 13:10:37: Connecting to MQTT server at mqtt://core-mosquitto
Zigbee2MQTT:error 2023-04-23 13:10:38: MQTT error: Connection refused: Not authorized
Zigbee2MQTT:error 2023-04-23 13:10:38: MQTT failed to connect, exiting...
#

And when I run it on screen shows up: 502: Bad Gateway

solid pelican
#

Can somebody help?

supple grove
#

Not authorized
Make sure you set the correct user/password

midnight widget
#

Is there any way to get an add-on to listen to a specified IP/interface, and not just "0.0.0.0"?
The problem I'm seeing is that I want dnsmasq to listen on port 53 on a specific IP/interface. systemd-resolvd is already listening to 127.0.0.1:53, thus having dnsmasq listen on 0.0.0.0:53 is not working in this case.

solid pelican
#

This is error in Mosquitto:

error: received null username or password for unpwd check```
supple grove
solid pelican
#

Both should match

icy trellis
#

anyone know why the go2rtc web-ui is broken for me? it only works on my phone with the homeassistant app but all browsers on my pc show unresponsive buttons

ornate badge
#

I'm trying to get a receive message sensor for the Signal Addon but get REST result could not be parsed as JSON when trying to make it work. Using the same config as the docs but with my registered phone number (what HA uses to send via Signal to my phone).

#

And with the IP to what the addon is listening on (changed to 4774)

#

I wonder if I should but something here to get the whole post? value_template: "" #this will fetch the message

#

Ah, might be that I'm using it in json-rpc?

lost solstice
ornate badge
lost solstice
ornate badge
lost solstice
ornate badge
#

Hmm so I need to subscribe to them somehow. Not as easy as setting up a sensor I quess

lost solstice
bronze kayak
#

I changed the DB from my HA to MariaDB, how do I connect to this database externally?

brazen sluice
#

I have a sonoff/ ewelink temp sensor that only displays as Celsius(in the add-on I can select C or F in the GUI config but I guess that setting is not applied outside the add-on. How to I get the sensor to show as Fahrenheit. Im guessing I have to write a yaml file but im just not sure how to go about doing this. I cant adjust the setting from C to F because the the entity doesn't have a unique ID. I have screen shots but I guess I cant share them here.

proven night
#

I'm having trouble updating ESPHome add-on from v2023.3.2 to any newer version. Whenever I click install from Home Assistant it spins for a second then display an error briefly.

When I look at the logs there's a couple different errors:

`23-04-24 14:44:31 INFO (SyncWorker_5) [supervisor.docker.interface] Downloading docker image ghcr.io/esphome/esphome-hassio with tag 2023.4.1.
23-04-24 14:44:33 ERROR (SyncWorker_5) [supervisor.docker.interface] Can't install ghcr.io/esphome/esphome-hassio:2023.4.1: 404 Client Error for http+docker://localhost/v1.42/images/ghcr.io/esphome/esphome-hassio:2023.4.1/json: Not Found ("No such image: ghcr.io/esphome/esphome-hassio:2023.4.1")

23-04-24 14:50:05 INFO (SyncWorker_6) [supervisor.docker.interface] Downloading docker image ghcr.io/esphome/esphome-hassio with tag 2023.4.1.
23-04-24 14:50:20 ERROR (SyncWorker_6) [supervisor.docker.interface] Can't install ghcr.io/esphome/esphome-hassio:2023.4.1: 500 Server Error for http+docker://localhost/v1.42/images/create?tag=2023.4.1&fromImage=ghcr.io%2Fesphome%2Fesphome-hassio&platform=linux%2Farm%2Fv6: Internal Server Error ("Head "https://ghcr.io/v2/esphome/esphome-hassio/manifests/2023.4.1": Get "https://ghcr.io/token?scope=repository%3Aesphome%2Fesphome-hassio%3Apull&service=ghcr.io": context deadline exceeded")
`

Any thoughts on what I can do to troubleshoot or resolve this?

proven night
#

Is HA trying to pull the wrong version of ESPHome? If found this in the logs:

Apr 24 21:50:20 homeassistant dockerd[474]: time="2023-04-24T21:50:20.471845359Z" level=error msg="Handler for POST /v1.42/images/create returned error: Head \"https://ghcr.io/v2/esphome/esphome-hassio/manifests/2023.4.1\": Get \"https://ghcr.io/token?scope=repository%3Aesphome%2Fesphome-hassio%3Apull&service=ghcr.io\": context deadline exceeded" Apr 24 21:51:41 homeassistant dockerd[474]: time="2023-04-24T21:51:41.556914714Z" level=info msg="Attempting next endpoint for pull after error: no matching manifest for linux/arm/v6 in the manifest list entries"

It says:

no matching manifest for linux/arm/v6

I'm running a Raspberry Pi 2B, which is ARMv7, not ARMv6:

silk ember
modest token
#

turn on bash-x to see the commands. try adding debug to the script, like which python ls -l

supple grove
white comet
#

Would this be a good channel to talk about lambda calculations in ESPHome?

viscid orchid
#

Nope

white comet
#

Oh I didn't realise it had a dedicated server, ty

proven night
#

Is there a way to manually update add-ons?

bitter skiff
#

They'll appear in settings when there's an update available

#

There's a toggle in each add-ons page for whether or not it should auto update

proven night
astral sundial
#

Hi all, sorry for barging in, is there a way to get basic sensor data from an hass.io add-on into HA without using MQTT, so via internal call/api instead?

astral sundial
edgy stag
#

Hello guys,
I'm trying to setup a wilcard domain via nginx proxy manager. When I select DNS challenge and choose Cpanel, I enter my cpanel url user and pass, but it always fail with the log 403 forbidden. I'm sure I'm using the correct credentials. Can someone help on this?

small scarab
#

do you guys now a way i can test modbus configuration " structure" easier then restart home assistant?

manic river
#

How do I restore a backup I made using the Samba Backup addon?

worthy horizon
#

I configured MariaDB as the new recorder. The history shows the value correctly. But how are the values are stored in the mariadb and how can I query them to get a matching entities, time/date and value?

#

It’s for grafana

supple grove
#

Enable query logging to see how the history integration does its queries and do the same

worthy horizon
#

Thanks. Is there a list which options are possible to enable for logging?

manic river
#

Hmm I updated home assistant to version 10 and now my nginx reverse proxy doesn't work

civic dock
#

i cant get my adguard to block ads

#

my phone says it has no internet when i point my dns to it

manic river
#

And now NPM is working. what the hell

civic dock
#

can someone help my adguard doesent seem to be working i have tried my phone and my laptop and the queries is always on 0 and i get no internet when i have the dns pointed towards it i have a static ip and im using homeassistant os with adguard plugin with a dell thin client

civic dock
#

nevermind i got it working by changing the ip

#

and restaerting

manic river
#

What are these keys for on the Z-Wave JS configuration page? (Network key, S0 Legacy Key, etc)

brittle night
manic river
#

Okay

deep breach
#

i just setup the letsencrypt add on... it stops after it gets its cert... will it auto renew? how does it do it if it is stopped?

worthy horizon
#

Hi folks, can anyone assist me or have a guide with: Home-Assistant, MariaDB, Grafana. I have already a MariaDB up and running and would like to store the recorder data in the MariaDB. From my point of view it works already, bc in History I see all value changes.
Once I'm in Grafana, Im struggle to access the history values. Where are they located? Where are the entities and the corresponding time Date with value?

vivid relic
#

hi all

#

i have a question about addons, i'm trying to get my google assistant to work with my NAD C338 ampiflifer

#

it works in google home, but doesnt show in assistant devices

#

any guides available? thanks!

void urchin
worthy horizon
#

I try to keep my environment small as possible with less software as needed, but I currently view a YT video with InfluxDB, HA, Grafana and reproduce this. If this works smooth, I have to admit that I go for HA and Grafana with Influx even that means I have to administrate to DB

void urchin
#

If you only want to use Maria Db you will need to take alook around where the historical data will be stored.

supple grove
worthy horizon
#

Would here the best place to ask about Homematic HACS integration behavior?

supple grove
#

No. It's not an addon. Check the link above for how/where the data is stored

upper lichen
#

How can I check the full log of an Add On? Currently trying to debug an external MQTT broker issue with Mosquitto where it doesn't connect, but the Log on the Add On page cuts off after a few lines.

tawdry swift
#

How do I set up the NGINX addon to be able to access my own subdomain via port forwarding? So far I am using duckdns and NGINX (Port Forwarding https). The subdomain is set up using cPanel. If any further information is required, I am happy to provide it. Many thanks for the help.

wicked sage
#

I've verified with curl queries that Loki is running and accessible from the Promtail container, it just seems like Promtail isn't sending anything.

heady flame
#

Hi guys! Does anyone using this bookstack community addon?
https://github.com/hassio-addons/addon-bookstack

After few days after I have created duckdns domain and setup nginx with bookstack I have got blocked by the google because of possible phishing web site.

Has anyone encountered this?

bitter skiff
#

I don't think that's due to your Bookstack add-on. That seems to be a fact of life w/ Duck DNS. You have to report it back to Google and hope in a few days they'll un-blacklist you

edgy stag
#

Hello guys,
I'm trying to setup a wilcard domain via nginx proxy manager. When I select DNS challenge and choose Cpanel, I enter my cpanel url user and pass, but it always fail with the log 403 forbidden. I'm sure I'm using the correct credentials. Can someone help on this?

bitter skiff
#

What does cPanel have to do with your Nginx and HA setup?

edgy stag
bitter skiff
#

Do you have special characters in your password? Since that plugin doesn't seem to be updated to support tokens, I wouldn't be surprised if there's encoding issues

edgy stag
#

hmmmm good idea!

edgy stag
bitter skiff
#

Those'll get ya, would be nice if that plugin were updated to let you use an API token instead of the password

edgy stag
#

but now I must keep the password without special characters right? otherwise the renewal will fail as well..

bitter skiff
#

That's correct, it'll need to do that each time

edgy stag
#

would it work if I encapsulate the password in ' '?

bitter skiff
#

🤷‍♂️ Can try, but kind of doubt it. You can try other special characters instead if you must have them.... ones like & ? : @ < > may cause issues, others I'm sure may as well

edgy stag
#

it was a # heheh

bitter skiff
#

If your password is 14 characters or above and has numbers, upper and lower case chars, you're pretty safe

heady flame
paper bramble
#

So I got the ssh & Web terminal add used that to ssh to my hassio and install a few packages with apk add, and edited the conf file of one of them with vim

#

I can see on the add ons configuration page a place to add packages which I assume where I'll type all the ones installed using ssh terminal but will the conf files be preserved?

supple grove
#

As tinkered said

ensure you store anything you want kept in one of the volumes

paper bramble
#

Can I get some newbie friendly context on what a volume is and how do I keep it there

supple grove
#

Addons are docker containers. Certain directories on the host are mounted inside the container. Data stored there is persisted. Which directories those are depend on the addon. Just research docker mounts/volumes and check the addon's config.yaml or use docker inspect to see what it mounts

weary stratus
#

Hi guys, I have some problems with my mqtt integration in Home Assistant OS 10.1 and need your help. I'm using the EMQX add-on and already successfully connected one of my Tasmota electricity switches to it (appears under the "Connections" section). But after adding MQTT as an integration in Home Assistant no services or entities showed up. So I continued and tried to connect my TeslaLogger. Without any further actions in EMQX the Tesla showed up under "Retained Messages" but not under the "Connections" section. Nevertheless I continued by adding Tesla sensor configurations to the configuration.yaml and this seems to be working as data from the vehicle started showing up in HA. Now I am confused why the TeslaLogger data stream works but my Tasmota switches are not identified in HA... Kann anyone help?

nimble ferry
#

I'm using linuxserver's swag docker image for my nginx proxying needs. when I add the directive to my proxy conf for HASS, i lose access to all of HASS with error 400, so something isn't right

#

has anyone else gotten swag to work in front of hass and vscode?

#

i'm not sure what exactly fixed it, but i both updated the trusted_proxies section in configuration.yaml in HASS to include 172.16.0.0/12, and I updated my proxy-conf to the latest version available from the swag team. i had accumulated a lot of cruft in mine, so there were likely conflicting or incompatible directives when i tried to add x-forwarded-host

#

and now i'm all set! i hope that mini writeup helps other searchers

fair coyote
#

I run Home assistant as a docker container and i manually installed esphome it works fine with esp8266 but when i try to install an esp32 it errors out.
when i tried googling about it they ask us to reinstall add ons and since i use the docker version i dont have add ons but i tried manually reinstalling the esphome docker container and it still doesnt work.
Any advice?

supple grove
#

it errors out
What errors do you get? ESPHome has their own discord. Might make sense to ask there since this isn't an addon issue and not really related to HA either

fair coyote
#

okay will try that

rose wing
#

Anyone know if I'm able to change the port that the Studio Code Server addon uses?

bitter skiff
#

Looks like no

#

I don't think it actually exposes any ports though

rose wing
#

I get

[2023-04-29T15:51:34.996Z] info HTTP server listening on http://0.0.0.0:1337/

But I'm using port 1337, I assume this is what it uses.

bitter skiff
#

What issue are you running into

rose wing
#

Moved HAss onto my server, server is using 1337, Studio Code Server no longer loads.

#

Cancel that, decided to work now.

#

🙄

#

Hop, skip, and jumping to conclusions, thanks anyway bud.

placid nebula
#

I just got adguard on my HA and trying to set it up but I'm confused on what does "Adguard Home server" address mean? Does that mean the IP of what the HA is on?

charred zodiac
#

You can add any other Adguard server as well. just type localhost or 127.0.0.1 or ::1 and you'll be fine

signal rock
#

Hello Team, last 3 months I'm using home assistance it great application to manage home devices, recently installed the Mosquitto broker MQTT Add-on for the HASS Agent.
I went through the HASS Agent and configured everything but I cannot establish the MQTT connection in the local network, Does anyone have any idea to fix this issue!
TIA

lime crescent
#

Hi. I successfully have InfluxDB set up as I want to keep my solar data for longer than the default 10 day retention in HA. Nevertheless I would like to import the existing recorder data (I am on HASS-OS VM so no custom install). Two questions: where can I even run the hass-command? (does not seem to exist in ssh session) and also the script to import recorder data to influxdb does not seem to exist anymore

#

how to do this? This cannot be such an uncommon use-case?

modest cedar
#

Hope someone can help.

I have duckdns that renews the certificate. But in order for it to work it needs a reboot. Someone knows if i can automate that so if the certificste refreshes it reboots

sly kindle
modest cedar
#

Yeah it auto renews them fine

#

But home assistant requirers a restart

#

Because then the new certificate will load

sly kindle
#

I don't recall having to do this when I used it. But you can definitely automate a restart of HA

modest cedar
#

Yeah but i want to do it automaticly when duckdns renewz the certificate

#

So i have the certificate expiration integration now. So now it says 24th of june. But duckdns renews the certificate if there are not more than 30 days left(renews for 90 days) so i cant seem to figure out when to reboot

#

Also cant find the code for duckdns so i can implement it there

kind elbow
#

I try samba and ftp and i did not get access to my HA

#

how can I transfer files do HA ?

#

I started the service at my windws

marsh pawn
surreal wing
#

morning. I'm trying to set up an mqtt monitor in the uptime kuma addon to monitor my nuki door lock. Frankly, I'm stumped as to what parameters I need to use. Anyone got an experience with that?

jade wing
#

Which parameters?

#

Other than host, port, username, and password the only thing you need is the topic, and $SYS/broker/uptime is one of many things you can use there

surreal wing
#

yeah, starting with host, which one is meant? The broker, or the device I'm trying to monitor?

jade wing
#

Well, the MQTT monitor is for monitoring the broker, not some other device

surreal wing
#

oh!

#

that explains a lot

#

I thought I could use it to check if my nuki lock was online

#

which is connected to HA by mqtt

jade wing
#

Check to see if it regularly publishes anything to MQTT

#

If it does you could use that being unchanged to trigger an automation

#

Does it go offline often?

surreal wing
#

not so far

#

but I like having all my toys accounted for in uptime kuma, and was hoping to add the nuki

#

nothing important though

#

it isn't pingable and it doesn't have a web interface that I could use to check http(s)

jade wing
#

Check the connected topic

#

Indicates if the device is currently connected to the MQTT server or not. Uses “false” as the last will message, which will be set by the mqtt server automatically if the device disconnects.

#

Looks like a sensor should be created for you already

#

When Home Assistant Discovery is activated the Nuki device publishes on each MQTT connect messages into the relevant topics with the prefix “homeassistant” which is hardcoded and can not be changed.

surreal wing
#

So I could monitor the broker for that topic?

#

Sorry, I really have no clue about mqtt, this is the first device that's using it, and it worked out of the box.

jade wing
#

You could monitor that topic, but check first for an entity in HA (likely binary_sensor)

river wharfBOT
#
Devices

Open your Home Assistant instance and show your devices

jade wing
#

There first, in the hope that it creates a device with linked entities

surreal wing
#

There is a device, but the only sensor entities are battery related.

#

plus a couple of button entities to lock/unlock/etc

#

battery seems to be updating every 5 mins

jade wing
surreal wing
#

I checked the debug info for the device, and there is apparently already topic called '"topic": "nuki/363AADEC/connected"

jade wing
#

Right, but for simplicity you want a sensor... or you can just use an MQTT trigger in your #automations-archived

surreal wing
#

Not sure where you're going with the sensor?

jade wing
#

Well, if you have a binary sensor you can just use that in a state trigger, use it in a condition, display the state in a dashboard...

surreal wing
#

right, but how would I get that to uptime kuma?

jade wing
#

You wouldn't

#

HA would handle notifying you

surreal wing
#

I see, sorry, that wasn't my goal. I was just looking for a way to have it checked in kuma. It already works perfectly well with some automations, an I get a notification on my phone from the Nuki app if it goes offline.

#

Just wanted that extra green line in kuma

#

but as I said, not important

jade wing
#

So... probably you could use that connected topic and the success payload of true (or whatever it is)

surreal wing
#

if I wanted to use the online/offline state for something in HA, I'd probably just check if the battery sensor is giving me a numeric value, or unknown

#

the connected topic doesn't see to be doing much very frequently. Last message in the debug info is from about three hours ago.

jade wing
#

It shouldn't

#

It should only update when the lock connects/disconnects

surreal wing
#

right

#

I will try your idea with a binary sensor

#

just for fun

jade wing
light yew
#

Is it possible to edit other (external) files with Studio Code Server addon. I’m running HA OS on a VM in Proxmox and would like to edit my Frigate config.yaml, but Frigate is running in another LXC, not as a HA addon

magic tapir
#

can somone please help Z2M is not starting

[12:35:27] INFO: Preparing to start...
[12:35:27] INFO: Socat not enabled
[12:35:29] INFO: Starting Zigbee2MQTT...
Zigbee2MQTT:info 2023-05-01 12:35:35: Logging to console and directory: '/config/zigbee2mqtt/log/2023-05-01.12-35-34' filename: log.txt
Zigbee2MQTT:info 2023-05-01 12:35:35: Starting Zigbee2MQTT version 1.30.3 (commit #unknown)
Zigbee2MQTT:info 2023-05-01 12:35:35: Starting zigbee-herdsman (0.14.103)
Zigbee2MQTT:error 2023-05-01 12:35:45: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2023-05-01 12:35:45: Failed to start zigbee
Zigbee2MQTT:error 2023-05-01 12:35:45: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
Zigbee2MQTT:error 2023-05-01 12:35:45: Exiting...
Zigbee2MQTT:error 2023-05-01 12:35:45: undefined

supple grove
magic tapir
#

done

supple grove
#

Restart and check the log again

magic tapir
#

[12:41:33] INFO: Preparing to start...
[12:41:33] INFO: Socat not enabled
[12:41:35] INFO: Starting Zigbee2MQTT...
Zigbee2MQTT:debug 2023-05-01 12:41:41: Can't load state from file /config/zigbee2mqtt/state.json (doesn't exist)
Zigbee2MQTT:info 2023-05-01 12:41:41: Logging to console and directory: '/config/zigbee2mqtt/log/2023-05-01.12-41-41' filename: log.txt
Zigbee2MQTT:debug 2023-05-01 12:41:41: Removing old log directory '/config/zigbee2mqtt/log/2023-05-01.12-35-14'
Zigbee2MQTT:info 2023-05-01 12:41:41: Starting Zigbee2MQTT version 1.30.3 (commit #unknown)
Zigbee2MQTT:info 2023-05-01 12:41:41: Starting zigbee-herdsman (0.14.103)
Zigbee2MQTT:debug 2023-05-01 12:41:41: Using zigbee-herdsman with settings: '{"adapter":{"concurrent":null,"delay":null,"disableLED":false},"backupPath":"/config/zigbee2mqtt/coordinator_backup.json","databaseBackupPath":"/config/zigbee2mqtt/database.db.backup","databasePath":"/config/zigbee2mqtt/database.db","network":{"channelList":[11],"extendedPanID":[221,221,221,221,221,221,221,221],"networkKey":"HIDDEN","panID":6754},"serialPort":{"adapter":"deconz","path":"/dev/ttyACM0"}}'
Zigbee2MQTT:error 2023-05-01 12:41:51: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2023-05-01 12:41:51: Failed to start zigbee
Zigbee2MQTT:error 2023-05-01 12:41:51: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
Zigbee2MQTT:error 2023-05-01 12:41:51: Exiting...
Zigbee2MQTT:error 2023-05-01 12:41:51: undefined

jade wing
#

I'd check the settings for the MQTT broker

#

undefined usually points to that being wrong/broken/missing

river wharfBOT
#

@magic tapir I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
jade wing
#

The settings in Zigbee2MQTT

surreal wing
#

@jade wing seems to be working. I'll have to wait for a change to be sure. But thanks for your help.

magic tapir
jade wing
#

Yeah... so ... you didn't set anything up

#

That's your problem

#

You need to define the server, and the authentication details

magic tapir
#

the video tolt me to let it as it is

jade wing
#

The video was wrong... which is no shock

# 
server: 'mqtt://core-mosquitto:1883'
user: some_user
pass: some_pass
magic tapir
#

where do i need to put this?

jade wing
#

In the MQTT config for Z2M

#

That big empty box

supple grove
jade wing
#

I wonder if there's things that cause it to fail then, since I've regularly seen this problem

#

Pretty much every undefined turns out to be somebody who hasn't defined the broker and is using add-ons

magic tapir
supple grove
#

Can you enable herdsman debugging as well?

jade wing
#

Did you put in valid details?

magic tapir
#

yes

jade wing
#

And if so, what's the new error?

magic tapir
#

[12:54:29] INFO: Preparing to start...
[12:54:30] INFO: Socat not enabled
[12:54:32] INFO: Starting Zigbee2MQTT...
Zigbee2MQTT:debug 2023-05-01 12:54:37: Can't load state from file /config/zigbee2mqtt/state.json (doesn't exist)
Zigbee2MQTT:info 2023-05-01 12:54:37: Logging to console and directory: '/config/zigbee2mqtt/log/2023-05-01.12-54-37' filename: log.txt
Zigbee2MQTT:debug 2023-05-01 12:54:37: Removing old log directory '/config/zigbee2mqtt/log/2023-05-01.12-35-55'
Zigbee2MQTT:info 2023-05-01 12:54:37: Starting Zigbee2MQTT version 1.30.3 (commit #unknown)
Zigbee2MQTT:info 2023-05-01 12:54:37: Starting zigbee-herdsman (0.14.103)
Zigbee2MQTT:debug 2023-05-01 12:54:37: Using zigbee-herdsman with settings: '{"adapter":{"concurrent":null,"delay":null,"disableLED":false},"backupPath":"/config/zigbee2mqtt/coordinator_backup.json","databaseBackupPath":"/config/zigbee2mqtt/database.db.backup","databasePath":"/config/zigbee2mqtt/database.db","network":{"channelList":[11],"extendedPanID":[221,221,221,221,221,221,221,221],"networkKey":"HIDDEN","panID":6754},"serialPort":{"adapter":"deconz","path":"/dev/ttyACM0"}}'
Zigbee2MQTT:error 2023-05-01 12:54:48: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2023-05-01 12:54:48: Failed to start zigbee
Zigbee2MQTT:error 2023-05-01 12:54:48: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
Zigbee2MQTT:error 2023-05-01 12:54:48: Exiting...
Zigbee2MQTT:error 2023-05-01 12:54:48: undefined

jade wing
#

Oh... and you did install, configure, and start the Mosquitto add-on?

magic tapir
#

yes

#

2023-05-01 12:08:57: New connection from 172.30.32.2:57936 on port 1883.
2023-05-01 12:08:57: Client <unknown> closed its connection.

#

broker

#

Mosquitto broker config

jade wing
#

If you install an MQTT client on your desktop/laptop - eg MQTT Explorer can it connect to your broker with the username and password you set?

#

Obviously you have to use the IP of the HA host, not core-mosquitto

magic tapir
#

this is fine right?
mqtt://localhost:1883

jade wing
#

No

#

localhost is "this computer" and is special (and when you're using add-ons isn't always going to work)

#

Z2M needs mqtt://core-mosquitto:1883 and anything other than add-ons needs the IP of the computer running HA instead of core-mosquitto

magic tapir
#

so the HA ip instad of localhost

jade wing
#

Yes

magic tapir
#

same error

jade wing
#

If you install an MQTT client on your desktop/laptop - eg MQTT Explorer can it connect to your broker with the username and password you set?

#

Have you done that test yet?

magic tapir
#

yes but it ceeps disconecting

#

im in

jade wing
kind elbow
#

good morning

#

I made integration my HA with sonoff

jade wing
kind elbow
jade wing
kind elbow
#

and made the adjusts at /config/configuration.yaml and /config/secrets.yaml

kind elbow
civic dock
#

im trying to add a repositories to addons and i get this error Cmd('git') failed due to: exit code(128) cmdline: git clone -v --recursive --depth=1 --shallow-submodules -- https://github.com/dianlight/hassio-addons. /data/addons/git/66a8881d stderr: 'Cloning into '/data/addons/git/66a8881d'... fatal: could not read Username for 'https://github.com': No such device or address '

spark vault
#

HI All,

#

Trying to install barcode buddy add-on, even after adding to custom repositories, it doesn't show anything to install

#

After rebooting the HA , i can see the add-on and installed but it won't start. I can see error s6-overlay-suexec: fatal: can only run as pid 1

#

anyone faced similar issue?

lofty shoal
#

Hey Guys,
I Try to install HA for my first time.
And my problem is, I can’t see any Add ons in de Tab…
Installation is fine advanced option is on but I can’t see any Add on.
Did anyone now were is my mistake?

jade wing
#

How did you install HA?

#

Only one of the three methods provide add-ons - HAOS

#

If you used Docker or pip then you don't get add-ons

lofty shoal
#

On a Unraid VM qcow/vid/vdmk an my last try on this das was on a Raspberry pi

jade wing
#

If you used the HAOS VM image then you should have add-ons

#

If you're following old videos though things have moved

#

And by old, anything older than a few months may be totally wrong 😉

river wharfBOT
jade wing
#

Try that link

lofty shoal
#

With the link I can see a blank screen with the Add-ons Store Title at the top.

jade wing
#

Ok, that's a good sign, it means you do have HAOS

lofty shoal
#

Check 👌🏻 but why I can’t see any Add on… do I need a Special DNS Server or a Special Network Setting to solve this problem?

jade wing
#

No, but somebody who knows how to troubleshoot this will be able to help you

lofty shoal
#

I hope so 😅 thanks for the quick request

supple grove
#

The logs might be worth a look

lofty shoal
#

ok how can i show you the log?? i am new on Discord 😅

river wharfBOT
#

Please use a code share site to share code or logs, for example:

Please don't use Pastebin, since it can randomly add spaces to the main view. Please also don't share text as images since it makes it harder for people to help you. Remember that others may have colour blindness, impaired vision, etc.

lofty shoal
#

i hop it work

naive cosmos
#

I am trying to build a reverse proxy. I have HASSIO on a Unraid VM. I have not had assess to my HA's IP. I have to us the HA.local to get access tothe Web UI. My Spectrum Router does not see the HA and I need a port to forward. Following videos on the many different addons has been very confusion. If anyone has some ideas. DMs are open.

jade wing
#

What are you stuck with?

naive cosmos
#

Port fording. HA does not pop up on my router. I cant just make a port forward. Thou after watching a video for DuckDNS It had me put
"http:
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem"
In the configuration.yaml
I have access to HA through VM Consol VNC, but I cannot bring HA back up through the HA.local rout. But I am also unable to make a port. I have to reserve an IP, but HA is not on the list and my UnRaid server has no IP to reserve an IP.
I am restarting that, but this has been a lot to try to follow.

jade wing
#

You'll have to use https:// to access HA after you added those lines, assuming you have certificates

naive cosmos
#

Thanks. I was about to be scared. Well. This will be at a rest till I can figure out why none of this is on my router, Thanks

naive cosmos
#

I undid that line. Though my HA has yet to be accessible via IP unless I can not log into HA through IP

gilded tulip
#

Hi! How can I have 2 domains sync at once.

  domain: "XXX"
  username: "XXX"
  password: "XXX"
  timeout: "60"
no_ip:
  domain: "XXX"
  username: "XXX"
  password: "XXX"
  timeout: "60"```
spark vault
signal rock
marsh pawn
signal rock
marsh pawn
#

and you set it up in configuration?

signal rock
marsh pawn
#

neither

#

the hass agent windows app has a configuration, you need to set your mqtt info there otherwise it wont know how to communicate with mqtt

signal rock
supple grove
#

It asks for a ip or hostname, not a URL

signal rock
supple grove
#

Could be but a local ip or hostname might be better

marsh pawn
#

your port in ha is the default, 1883

#

you changed in in hass agent

#

it should also be 1883

#

mismatched ports is like 2 cars going down parallel streets expecting to meet each other in themiddle

signal rock
gilded tulip
bitter skiff
#

Can you add a CNAME to one of them instead? That's an #integrations-archived but doesn't appear that you can have > 1 instance and it doesn't seem to support multiple in config

quartz turtle
#

Hi, is there anyone using sun-card addon? I have a question. I'd like to have white font on this card. The visual editor display it white but when I save it its always black.

#

type: custom:sun-card ... this is the card code

jade wing
#

The card isn't an add-on

#

Cards aren't add-ons, ever

quartz turtle
#

My bad sorry

winter warren
#

Can someone help me with password for VLC for telnet ?

river wharfBOT
#

@carmine tree I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
carmine tree
#

The result is that when I try to visit https://mydomain.duckdns.org I get the login screen, but once I log in, I just get the "Loading Data" screen until it times out and says "can't connect"

#

duckdns config:

  - mydomain.duckdns.org
token: mytoken
aliases: []
lets_encrypt:
  accept_terms: true
  algo: secp384r1
  certfile: fullchain.pem
  keyfile: privkey.pem
seconds: 300
#

nginx config:

hsts: max-age=31536000; includeSubDomains
certfile: fullchain.pem
keyfile: privkey.pem
cloudflare: false
customize:
  active: false
  default: nginx_proxy_default*.conf
  servers: nginx_proxy/*.conf```
#

I've tried nginx with active: true as well, and no difference

#

I think the nginx is not the problem at this point, unless the login screen is unencrypted but the actual dashboard is, which makes no sense.

#

Actually, turns out I'm getting this:

Source: components/http/ban.py:80
Integration: HTTP (documentation, issues)
First occurred: 5:34:01 PM (2 occurrences)
Last logged: 5:35:02 PM

Login attempt or request with invalid authentication from dsldevice.attlocal.net (myip). Requested URL: '/auth/token'. (Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36)```
#

And fwiw I'm specifically trying to visit the url from an incognito window to avoid using the same token

vivid sentinel
#

I've tried a reboot, tried reinstalling the add-on, tried clearing browser cache

wicked sage
#

Hi everyone - I am trying to use the Promtail add-on on Hassio (https://community.home-assistant.io/t/home-assistant-add-on-promtail/293732) but it doesn't work and I can't figure out how to start debugging it. When I go into the container I can't even get started because the user doesn't have permissions to run apt-get and I can't use sudo or su. Is this something to do with AppArmor (https://github.com/mdegat01/addon-promtail/blob/main/promtail/apparmor.txt) and if so how can I turn it off to do some fiddling?

bitter skiff
#

What do the logs say when put into debug mode? And why are you wanting to "do some fiddling", they're not meant to be played around w/ outside of the exposed config

slate crown
#

anyone here willing and able to help me configure wireguard on my openwrt router?

#

the wireguard connects seems to work but I guess I'm stuck at routing packets correctly.

worthy horizon
#

Not sure where's the relation with HA

slate crown
#

HAOS with wireguard ADD-ON. So it's in the ADD-ONS sub-channel

#

And I got IOT devices from outside the network that need to connect to my HA

opaque pilot
#

Hi, using the motioneye addon. I set up an imou cue-2c as a network camera using RSTP. I can see the stream but only receiving max 3-4 fps. I set up de video device to 20 FPS (match the original stream). When using the same RSTP on VLC I can see the 20 fps. Also the camera is added to HA using ONVIF and it looks great. Any advice?

tardy quest
#

Using the MariaDB add on, its been trying to upgrade from 2.5.2 to 2.6.0 for the last hour, should it be taking this long?

#

NM, its finally finished. Man, that took a while

winter copper
#

I'm new to Home assistant and im trying to get frigate to run. I installed it (and did nothing else) and when i go to settings > add-ons > frigate > start, the CPU and RAM changes for 2 seconds and then freezes. If i click the "open web ui" button it says that Frigate is not running. I'm not sure what to do but i have an idea it could have something to do with the frigate configuration file, though im not sure how to fill it out/where to get the required information for it to start

bitter skiff
winter copper
# bitter skiff Check the Log tab, it should give you an error

'''2023-05-03 11:04:34.458 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2023-05-03 11:04:34.458 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration garmin_connect which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2023-05-03 11:04:34.458 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration dyson_local which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2023-05-03 11:04:34.459 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration frigate which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2023-05-03 11:04:34.459 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration dyson_cloud which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2023-05-03 11:14:04.108 ERROR (MainThread) [custom_components.frigate.api] Error fetching information from http://192.168.1.18:5000/api/stats: Cannot connect to host 192.168.1.18:5000 ssl:default'''

bitter skiff
#

Wrong log

#

Addon log

winter copper
#

Sorry, where do i find that?

bitter skiff
#

Go to the page where you saw the Open Web UI for Frigate

#

At the top click Log

river wharfBOT
#

@winter copper I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
bitter skiff
#

Looks like it's running to me

winter copper
#

right now the RAM is at 1.5% and CPU is at 0% and they don't move at all. When i click "Open web UI" i see frigate at the top and loading icon spinning, but nothing else happens.

#

So what im saying is: this is new, but i'm still stuck

bitter skiff
#

You've got /config/frigate.yml configured w/ your camera settings?

winter copper
#

no. Not sure where to find the relevant information

bitter skiff
#

What addon are you using

winter copper
#

and what is required in the file for frigate to work

#

Frigate (Full Access)

bitter skiff
#

Take a look at the Documentation tab next to Log. You need to create /config/frigate.yml