🔧│keyboard_modding

[robust siren]

kinda defeats the purpose though

cause id have to get the edges of the middle also cut to have tabs

[tidal frigate]

@tawdry tree I have to buy some screwdrivers. Ifixit is fine?

[tawdry tree]

3 plates on a 60% would be crazy work

[cyan lark]

You didn't ask me but I like 'em. They also have a lifetime warranty which I exercised recently - replaced a bit that got damaged in use.

[tawdry tree]

xiaomi mija electric screwdriver, aliexpress <€30

[robust siren]

[cyan lark]

https://en.wikipedia.org/wiki/Gerrymandering

[tawdry tree]

oh like that, could work 👀👀

rakka’s standoff locations are more optimal, but not perfect either

[robust siren]

what is that spacebar mess

[tawdry tree]

that’s a plate that supports all layouts simultaneously

no real need for that

only interesting if you wanna play around with layouts a lot

[robust siren]

https://tenor.com/view/batman-hmmm-thinking-one-second-let-me-think-gif-15838250914742163450

[tawdry tree]

(which nobody really does)

for mods (outside): CF
for alphas (inside): PP, Alu, and Copper

maybe PEI for the outside

[tidal frigate]

What about tungsten or titanium

[tawdry tree]

tungsten 😭😭

titanium is possible but kinda expensive af

so I rather not for something experimental like this

[tidal frigate]

Tungsten plate might be new meta

And more expensive than titanium

[tawdry tree]

looks like sheet tungsten is difficult to source

big enough for a keyboard plate

and quite expensive indeed

$22 for a 10by10cm sheet 😭

[tidal frigate]

Well because tungsten small cube is expensive.

You will have to buy big cube. Melt it, make it flat and long

[tawdry tree]

https://tenor.com/view/gif-gif-9403556598434283568

[robust siren]

gl tryna melt it

[tidal frigate]

@tawdry tree but you will have to pay like 5000 to make plate in materials alone

[distant raven]

Tungsten would be a terrible plate material.

[craggy aspen]

What keyboard mods does the 60HE v2 not come equipped with?

[uneven cradle]

It basically has all the mods people would normally do already, whatever else is up to you

[dull latch]

Where can I find keykobo OHM semi transparent key caps?

Just need those to complete my board

In the US

[craggy aspen]

What about a gasket mount?

[cyan lark]

It's friction fitted

[robust siren]

divinikey (us vendor) and keykobo offical site shipping isnt that bad

unikeys ships from china but shipping is like $10

[craggy aspen]

Well I already bought the prebuilt version so I assume I can’t add gasket to it now? I was looking for the best esport catered keyboard that also sounds great. Currently have a razer blackwidow v4 75% for reference, and it does have gaskets so I’m wondering how different it’ll feel now

[cyan lark]

You'll like it, don't sweat it.

[robust siren]

@tropic urchin blue (and a whole lotta it)

idk if i should change the color of that caps key to the same blue as everything else

[robust siren]

BOW or WOB
black on white or white on black ❌
blue on white or white on blue ✅

[cyan lark]

BLoW // WoBL

[robust siren]

that still doesnt help cause both still start with BL

[chilly mural]

This BLOW

[cyan lark]

Can use the CMYK solution and swap black to K

so we'll have to retrofit every BoW and WoB to BoK and KoB

BoK BoK 🐔

[calm pulsar]

or yall can grow up and stop fiddling with keyboards and do something productive

[cyan lark]

https://tenor.com/view/stfu-shut-up-tellmeits0ver-gif-11272282707940712039

[robust siren]

its thsnksgiving break im gonna fiddle

[lethal ingot]

Do I make poor financial decisions and purchase a black Holy80 with a black internal and a new black cable too, get a white one since I already have a white coiled cable, or just be smart and not buy either of those

(And just get a Sony XM6 or a cheaper headphone since I don’t have any)

[chilly mural]

What's the headphone for?

[lethal ingot]

Just to use for studying and/or traveling

I have some ear issues which made me stop using my AirPods but I want to get back into listening to music

Close enough to modding TwT

[trail bane]

Financially maybe yes, but anyways

https://tenor.com/view/the-god-father-marlon-brando-vito-corleone-talk-to-me-gif-20107028

[lethal ingot]

https://cdn.discordapp.com/attachments/1045739774092251217/1437748617489416202/IMG_8176.gif

[trail bane]

Holy enjoyers

[lethal ingot]

Fr

It was just always so expensive

But

20% is 20%

I really really wanted the internal bottom though in case anything goes wrong though

[tropic urchin]

@tawdry tree @cyan lark

[chilly mural]

noice~

[tropic urchin]

Purple enjoyers going to be eating well once we get lore accurate cosmos

[trail bane]

What’s the damn good prices

Yummy discounts

[fringe lake]

Can the tofu60 redux support the v2?

[trail bane]

#🪛│modding_faq message

[fringe lake]

The redux is not listed inside but 2.0 is

Are they the same ?

[glacial wind]

I didn’t add redux to that yet since it’s been more for non compatible cases

[trail bane]

Oh my bad

[glacial wind]

But yes redux is compatible with tray mount and friction fit

[fringe lake]

Thank you

[timber crystal]

Does anyone have the list for friction fit pad compatibility?

[glacial wind]

There isn’t one really because it’s very rough and not every case has been tested

I plan to get more cases for testing over next couple months but it’s basically impossible to test every case since there’s literal hundred+ options

[timber crystal]

did u maybe test the tofu 60 redux?

[glacial wind]

Yes it works

[timber crystal]

ty

[rough aspen]

Must be a fun time. :)

[cloud crane]

Will you get the Gehirn60 👀

[glacial wind]

only the popular options will be tested, so not the gehirn60 as it's too niche

[cloud crane]

Ok 👍

[lime yew]

Once you get it you can let us know and we can add it to the list 😄

[cloud crane]

I'm not getting it though... 😭 Some others are

The designer says that compatibility is achieved using an adapter 🤔

[paper bison]

kbdfans bf sale crazy

[stoic ocean]

I'm going to buy it, but I don't have a Wooting 🥀

I'm going to take it with the Rakka PCB

[fallen pecan]

wuque 60he 899 yuan pcb only, 1299 yuan assembled pcb: https://v.douyin.com/qBBUUFy9u7I/

[stoic ocean]

2mm pcb

[tawdry tree]

It’s heavy and fairly stiff, it wouldn’t be bad I think.

[prisma harness]

For the 80he I don’t have to disassemble the whole keyboard to change the switches right? I can just pop out the old ones and place the new ones in?

[cyan lark]

Yes, though it may be faster overall to open it up and take off the switch plate to make pulling the switches easier, assuming you’re replacing all your switches

[prisma harness]

Alright thanks

Just wanted to make sure I wasn’t risking the integrity or anything

[peak breach]

Wolframium plate

Also beta switch selector yahoo

Still sad about knob delay tho

[sour blade]

Yo guys do you know the gmk keycap set that is themed to match this exotic case maker who does xenomorph themed cases that are pretty pricey

i forgot the name of both of them

its neon green ish themed

The artist does a lot of raw aluminum pieces usually its xeno themed

lots of eye motifs in the board

NVm found it its "Nerve Wrecker"

random ass name

[peak breach]

Rewatched the latest video, kinda confused, so calder isnt sure if the small knob will make it to q1 but the big one is?

[tawdry tree]

They’re not gonna make Q1, but then also, the big knob will make its target.

[tawdry tree]

I guess he meant just the small knob at the beginning, so the big knob won’t be delayed.

[peak breach]

At the end he says he’s not sure if the small knob will make it

So there’s still a chance

[fallen crag]

Not wooting related, but, I’m helping a friend build her first custom keyboard and this seems like a good place to get switch recommendations.

Mainly looking for a slightly heavier (60g+) press, tactile feel (without a loud click), little to no stem wobble.

Also a deeper sound, but I’ll send them sound comparisons if I get a few decent recommendations.

If you guys have any recommendations for good quality mechanical switches that fit this that would be amazing!

[cyan lark]

Knob waiters spinning out

[cloud crane]

HMX Valerian? (55g tho)
https://youtu.be/0jKwpBM0fiM
You can browse shops like Unikeys and Milktooth and see what they offer

[lusty river]

hey I have the mmd c1 switches which have a total travel of 3.3mm, is there a way to set this in wootility right now? and will they add more switches in the future to select from? thanks!

[tawdry tree]

The switch selector is in beta right now and I doubt the C1s have been added to it yet.

I’d just use the stable version of Wootility, they’ll work just fine.

Just treat the slider as 1-100% instead of actual millimeters.

[lusty river]

I mean a switch selector just helps with setting the right actuation point etc. and display the correct travel right? other than that it doesnt change much?

[sacred elm]

Select Geon Raw in the selector and enable spacer, set it to 0.1mm

[lusty river]

what does spacer mean?

[paper bloom]

Those stabilizers

Where u install those like geon spacers

To increase the height of ur switches so it wont mess with the stabs

[tawdry tree]

Holy spacer support

[lusty river]

oh so it if I will do that its like setting it to 3.3mm actuation? I seee

[tawdry tree]

That doesn’t affect travel so not that

[paper bloom]

Idek

[sacred elm]

Yes, it will decrease total travel

[tawdry tree]

Travel limiters/O-Rings etc

[paper bloom]

O i c

[lusty river]

ohh perfect, thank you guys!!

[sacred elm]

More switches will be added in the future, not sure if they're going to add MMD C1 though

[glacial wind]

btw we were actually discussing the gateron jades already to decide if we wanted to label them as actual measured 3.3-3.4mm or 3.5mm

in the end it's just left as 3.5mm for now because it's going to get messy if we have to correct every gateron switch measurement and answer every time why 'gateron says 3.5mm but your switch selector says x'

[tawdry tree]

They can be labeled as whatever, as long as the board reads them accurately

[glacial wind]

yeah

the curves are all right so it's fine

[tawdry tree]

For the venom that doesn’t seem to be the case with Raeds for example

[lusty river]

but if I just go with the spacer method then ill be good right? it should display every correct? or is there anything else im missing?

[sacred elm]

Yes, it will work well

I chose Lekkerv2 in the selector and set 0.5mm spacer, until they add Fluxies in the selector

[cyan lark]

To that point, would it make sense to just have an "advanced" option where you can set whatever value you want instead?

Or is the selector also taking into account the magnet's properties

[sacred elm]

Magnet strength is the most important part

[tawdry tree]

I’d like that but I don’t think they would want to add something like that, as to not make it more confusing for people.

[glacial wind]

you can leave feedback and see - one of the things we wanted to add is a default mode too, where it's just the most average range magnetic range

for people who have something that they can't find and don't know which switch is closest to it, so they can just select the auto

[tawdry tree]

It’s the strength and curve, so just changing the travel wouldn’t do everything (though the Sayo and some other boards do have just that and seem to work well).

I still don’t really understand why just the travel isn’t enough, are the curves that different/inconsistent from magnet to magnet?

[glacial wind]

they are indeed

some magnets are really different

by like 50%

oh actually i should test gateron sparks now. I bet they're workable even without being in the selector now that i can set the range to 3.2

before it got way too slow and confused when it couldn't hit 4mm

[paper bloom]

I am hoping for the switch selector for the

Raptor v2 HE

But its the same as the raws

[glacial wind]

first wave is only switches we sell in the store as those were tested the most and ready to go

[paper bloom]

O i c

Yah thats fair

[glacial wind]

2nd wave will be switches they are popular that we'll either add via poll or by me just telling them what's popular right now

like flux for example or just a basic gateron ruby

[sacred elm]

YES

[paper bison]

am i blind or where is this in wootility

[sacred elm]

Did you update the firmware?

[paper bison]

on v2.11.0, do i need to be on beta branch?

[sacred elm]

#📰│wootility_updates message

[paper bison]

seen

cheers boss x

[sacred elm]

after installing beta 2.12, update to 2.13

[honest sparrow]

Hello guys. Can someone tell me if the friction pad on the 60v2 is transparent silicone like the old one? I cant see it anywhere

[tawdry tree]

It is.

You can find a stream of an event where they showcase it.

[honest sparrow]

Thanks you always saving my ass. My son is going to be named after you

[cyan lark]

One more for his army

[honest sparrow]

XD

[tawdry tree]

@fluid ravine https://kbdfans.com/products/ags-radiant-he-magnetic-switches “P2” is HMX’s fiber infused nylon, so presumably the same material as the Crystals. The top housing of these are listed as nylon too, but I doubt it to be true, as usual.

Also, I think all HMX’s magnetic switches so far have had a fiber infused nylon bottom.
(not really based on anything, just a hunch as they don’t seem to sound different to me, and the Astrolinks don’t specifically list their bottom housing material)

[fallen crag]

keycron Q12 southpaw max QMK/VIA wireless aluminum frame
DROP halo True Mechanical Switches (Depreciated but still available for now)
GEEKIRA 96% keyboard case
Red 1.6mm PBT OEM keycaps Accent Keys ANSI
YMDK 1.6mm PBT OEM side legend Cyrillic Keycaps dolch red ISO
(They want ANSI setup with a particular Cyrillic keycap set so it’s two sets to make it in the color and form they want.)
Keyboard Maintenance supplies
hand lubed, greased, and assembled
~$400 material cost (shipping hurts)

This is the stuff my friend decided for their keyboard I’m building for them. What do yall think?

Im doing the assembly and lubing and stuff, but, they’re paying for supplies.

Im just doing the setup for them as a Christmas gift.

[tawdry tree]

Three keycap sets?

Two?

[fallen crag]

No I got keychron without the pre build

So just two since the one with Cyrillic legends is ISO

And they want ANSI

In the enter and backspace and such

So we had to get the main keycap set + some blank accent keys.

So it’s a full set + separate accent keys. Not two entire sets.

[tawdry tree]

Hmm, there wasn’t a set he liked that included all the keys?

[fallen crag]

Unfortunately not

[tawdry tree]

I see

[fallen crag]

Things get a lil tight when you’re looking for Cyrillic keys they’re almost only produced in ISO as far as I can tell

Or well, any decent quality ones in the right color scheme were anyway.

[tawdry tree]

Yeah, makes sense.

I don’t know much about Keychron’s mech boards, just that their HE and TMR boards are kinda shit when it comes to software.

That doesn’t really matter for mech though, as you can use QMK or Via maybe?

[fallen crag]

I mostly went with that cuz it’s hard to find a left handed numpad in a decent frame. She wanted southpaw and aluminum frame with good sound dampening.

Yea mechanical is pretty consistent as far as PCB and software goes.

[fallen crag]

So it shouldn’t be an issue, less can go wrong.

[tawdry tree]

Southpaw and Cyrillic, don’t got many choices lmao

[fallen crag]

Yeeeeep

Im shocked that I managed to find everything to make this work

The switches are pretty nieche too

[tawdry tree]

One thing might be worth looking into is if the Q12 comes stock with plate mounts or PCB mounts

you can tune both to sound good but PCB mounts can be a bit more consistent

[fallen crag]

PCB I believe

[tawdry tree]

That’s fine then, I think you’re good.

[signal lily]

What does this mean? Am I still good to order the 60he v2 with the alumaze60 case?

[analog ridge]

after many reviews, i saw that the wooting 80he spacebar sounded very hollow. does anyone have any recommendations that are cheap?

ooor do you think i should consider something like the keychron q1 he

[uneven cradle]

It means what it means if you use that case you'll need to screw in the included grounding stand off

It's to prevent potential ESD issues

[signal lily]

Ahh I see, and I have no idea what the grounding stand off is. Is it something simple to install?

[glacial wind]

It’s a screw

Literally all it is

[signal lily]

Bruh😂, nvm then.

[glacial wind]

just something metal to connect the pieces and let static flow through basically

[signal lily]

Bet, thx for the help

[stray tiger]

Happy Thanksgiving!

[glass dragon]

Nuphy sells a spacebar with silicone inside (to sound fuller), I had one and it worked really well

Due to obvious reasons though, you either have to live with a mismatch of colored keycaps, or limit yourself to the colors the spacebar come with

[analog ridge]

the spacebar itself?

i mean i know the nuphy halo65 he has the silicon spacebar mod but i didnt know they sold it seperately

[ionic breach]

https://nuphy.com/products/ghostbar

not much stock tho

maybe other retailers have stock

[analog ridge]

okay thanks

[glossy pagoda]

I prefer the Akbar personally

[thorn yew]

Yo what's up guys

[trail bane]

Great spacebar

[stray tiger]

What's up

[harsh dove]

Happy Thanksgiving 🦃

[thorn yew]

Nothing Much

[honest sparrow]

Guys I had the 60he with the friction fit pad built on my tofu but im moving it to the stock plastic case. Do i need to remove the foam on the bottom if im using the friction fit pad?

[humble surge]

good to see ya man

[robust siren]

friction pad doesnt work in the 60he plastic case

it only works in the v2 plastic case

[honest sparrow]

You sure?

[thorn yew]

Good to see you too man

[sacred elm]

Yeah, it won't fit

[robust siren]

yeah, part of the reason why theyre making a v2 plastic case

[honest sparrow]

I managed somehow

[robust siren]

🤨

[honest sparrow]

Im removing it asap

I thought it was compatible, there was a silicone sandwich pad thoug

Am i right?

[polar girder]

I have one. I like it.

[robust siren]

yeah, the silicone one comes with the pc plate i think

[polar girder]

Happy thanksgiving and turkey day folks

[honest sparrow]

Thank you

[thorn yew]

Oh Yeah Happy Thanksgiving guys

[honest sparrow]

You have to use either the poron pad or the silicone, right?

[robust siren]

yeah but you can cut it if you want

its waht i did

and its what im currently using

[paper bison]

crosshair spacebar kit is out of stock so i just got the wob one instead, same profile, both pbt and same manufacturer so will be the exact same

and yes i bought another stab kit as a backup

holy for 20% off tho

[cyan lark]

You too buddy 🦃

[humble surge]

You too

[thorn yew]

Thank you

[honest sparrow]

And you can keep the bottom foam yes?

[robust siren]

im using a different case with no foam

[thorn yew]

Oh also the MMD C1 say on the tracking website that they provided that they are delivered but they didn't come at all

[humble surge]

What the 👀

[robust siren]

i suggest using foam in other cases

[thorn yew]

And tomorrow I'm gonna contact my local post office

[humble surge]

You got it from AliExpress yeah?

[robust siren]

the only reason i dont use foam is becuase theres not enough room in the case

[thorn yew]

Only The Wuque Deep Flux

[humble surge]

Where is the C1 from?

[thorn yew]

MonacoKeys

[humble surge]

I see, might worth talking to them aswell.
Have you had a look on different trackers?
Do all say the same?

[thorn yew]

No

Let me check

[trail bane]

Imagine foamless holy80

[humble surge]

I mainly use Parcelsapp, but there have been times when the provided one or one i randomly checked in addition had more detail.
Although it's usually the opposite, Parcelsapp being more detailed than the others.

[thorn yew]

It says Deliver Item (Inb)

[robust siren]

theres not enough room in the gt-60 🥀

[humble surge]

Huh i wonder what that means

[thorn yew]

That's the one I used

[humble surge]

I see

[robust siren]

if i use foam in the gt-60 it interferes with the gasket mount

[humble surge]

I would definetly write an email to monaco aswell (or live chat if they have), see what info they can say by them looking at it aswell.

[thorn yew]

Maybe (Inb) stands for Inbound?

[humble surge]

Good guess

[trail bane]

Now you don’t have to

[thorn yew]

But it's late here the post office is closed

[humble surge]

Fair enough, story for tomorrow i guess :/

[thorn yew]

Yeah

[trail bane]

It looks ugly, but have dry clack sound which I kinda like

[thorn yew]

Because the tracking is on Dhl De I called the Dhl of my country and they said that they're not the ones that handle these packages

So I have to contact my local post office

[humble surge]

Yes because DHL packages are treated as normal postal packages in other countries

It's a confusion thanks to Germany

[thorn yew]

Oh

[humble surge]

Unless ofcourse exclusively stated and ordered as DHL courier

[thorn yew]

No no

If I go to my local post office's website tracking it Registers as Cyprus post

[humble surge]

yeah

thats what i'm saying, and thats from my own experience aswell

i think they call it DHL Paket or something

[thorn yew]

Yeah

That tells me something

Not sure tho

[humble surge]

So that translates to wherever you live, local postal delivery

[thorn yew]

Yeah

So tomorrow first thing in the Morning I'll contact them

[humble surge]

Fingers crossed man

[thorn yew]

Maybe it was supposed to come today but they rescheduled it for tomorrow

That happened a few times

[humble surge]

Could be

[thorn yew]

Yeah maybe

[humble surge]

For me, if they don't find me home, they leave a little card saying to go fetch it at the closest post office, sometimes not leave one at all. So i have to figure it out with my 6th sense.

[thorn yew]

Well there was nothing in the mailbox

And sometimes they put it behind a flower pot

[humble surge]

^^

[thorn yew]

Yeah

At least when I order from amazon and it's dhl

That's what they do

Let's just hope they didn't lose them

Or deliver them anywhere else

At least the other ones look okay

So far so good

The fluxes are almost here

Gotta wait a bit more for the others

[stiff sand]

going to buy new switches and i want reesponsive and stable but dont know where to look first

looking at gateron dual rail magnetic jade rn

[sacred elm]

I replied to you in general

[honest sparrow]

fixed, thank you @robust siren

[stiff sand]

didnt load at first looking at em now

[rich talon]

Got a question for y’all. I have a Holy 60 case with Spider Keycaps. Will this work with the Wooting 60HE v2?

[analog ridge]

idk but what if i use vaseline to lube my stabilizers and switches?

[sacred elm]

Yes

[rich talon]

Ok thank you!

[paper bison]

no lmao

use krytox 205g0, you can get it cheap

[analog ridge]

its not available in my region 😭

i live in india

[paper bison]

https://hardwarecorpus.in/products/krytox-gpl-205g0-5-gram

isn’t .in india?

[analog ridge]

oh what

never heard of this website

[analog ridge]

is g lube alright?

[analog ridge]

neomacro has it ive heard of neomacro

thanks

is 3g enough?

[paper bison]

for one board of switches and stabs, yeah

should be fine imo

i usually buy 5 and have left over

make sure you have some small tip brushes too

[dapper magnet]

jade maxes or ur ice ultra for rgb?

[robust siren]

ice ultra

or mmd c1

[dapper magnet]

i have geon raw rn will the rgb be brighter with ice ultra

[uneven cradle]

Most likely they are fully transparent

[dapper magnet]

does anyone have any builds with the ice ultra with rgb on i can see

[uneven cradle]

#💬│general message

C1s are probably pretty close to the maxes

[humble surge]

Ice Extreme

[dapper magnet]

bought the mmd c1

[cyan lark]

@tropic urchin Labradorite 🤩

[stuck yarrow]

any recommended keycaps for black 80he? Some good quality ISO

[humble surge]

Honestly the stock PBT ISO is great

[paper bison]

depends how much you wanna spend on third party caps

[stuck yarrow]

idc, anything

[robust siren]

what color theme

[stuck yarrow]

i would not be asking if I need something else

but yeah, they are good

[robust siren]

pbtfans, gmk, keykobo

[cyan lark]

https://drop.com/buy/gmk-white-on-black-custom-keycap-set

[humble surge]

Ohh sorry, you were not very specific. Just tried to help.

[paper bison]

https://kbdfans.com/products/pbtfans-crosshair-1 tried and tested, or PBTFans WOB

[stuck yarrow]

more into the black purple direction i would say

[robust siren]

gmk pob

[cyan lark]

Ooh the coyotes are screaming outside 🐺

[stuck yarrow]

cant even see the keycaps cause the image is so weirdly dark

[robust siren]

bad photo lmao

[stuck yarrow]

its every photo

wait

it was dark reader nvm

[trail bane]

Gn

[small ridge]

What is that site?

[uneven cradle]

https://www.alexotos.com/keyboard-vendor-list/

[small ridge]

Thank you!

Would have been handy yesterday before I ordered switches from AliExpress lol

[jolly wagon]

Hey does anyone know what the difference between the UR Ice blue pink and ultra?

[rough hedge]

At least on my modded 80he, dcf sound more like a deep marbly clack, tikkens sound more muted clack

sound wise? I preffer dcf

[small ridge]

I bought owlab ti switches for my wooting 80he. Can I just use the included stabs and lube them or do I need other brand long pole ones

[paper bison]

you can use the included ones still

[small ridge]

Ive got GPL 205g0 for the switches and stabs and
GPL 105 Oil for the switches springs and Permatex Dielectric Grease for the stab wire. Thats fine? Since the wooting video uses a different lube for the wire

[paper bison]

yeah that should be okay iirc

[small ridge]

Thank you

[sharp ivy]

anyone know where i can get these caps in norwegian language? all with side print? : 1 topo white, plan white and transparent white. topo Black, black red details and a black transparent

it needs to be norwegian. iso if i am remember correct

[fluid ravine]

PA12 is a type of nylon as well right? I forgot

Never heard of P2 but ya interesting to know

[fluid ravine]

lwok need the soju keycaps now

[robust siren]

yes

[fluid ravine]

I have a WallHack Miku Glasspad coming in this tuesday

[robust siren]

https://cdn.discordapp.com/attachments/167181566978555904/1443463065013063680/IMG_8623.jpg?ex=6929d1fc&is=6928807c&hm=701eb6ddada55a0702684835a053f1138865dd005784f20dd9f4df8bcf9be473&

[fluid ravine]

yeeeeeeeeeeee

need

[robust siren]

using it with my v2 split spacebar

[fluid ravine]

i might have to hold back on the v2 for now

got other plans that i gotta fulfill forst

[robust siren]

it comes 11-15th

[chilly mural]

Wont be too long before pepo getting 60hev2

2 more weeks!

[quartz galleon]

anyone purchase aftermarket kit? https://torontokeyboardman.ca/products/wooting-80he-modding-kit?variant=44513538080963

If you did, was there a acoustics difference. Or little to no impact to sound compared to the stock plate.

[robust siren]

different plate materials will change how the keyboard sound based on its soft to hardness

softer plates will make it sound more muted and harder plates will amke it sound brighter

softest plate is pc and hardest is probably some metal plate or if you dont want metal, carbon fiber is the hardest

[quartz galleon]

definitely true, although I've had plates with other customs that have made bigger impacts to sound than others. Just wondering what everyone's thoughts are on 80he plate swap

[paper bloom]

I forgot to mention rn is black friday EVERYTHING is so cheap

holy fuck for the flux's

NOW i can officially build my HOLY60 without breaking my wallet 👍

Literally glazing the fuck outta aliexpress rn

[robust siren]

https://tenor.com/view/doja-cat-star-wars-gif-25078126

[paper bloom]

i alrdy bought the 90 pack

From ainy

[chilly mural]

Chinese store do be build different

[paper bloom]

yeah lmao

Does anyone know if i were to buy the plastic case from the module option do i get the daughterboard?

[glacial wind]

Are you listening on laptop speaker or similar? The sound tests are definitely very different sounds

[tidal frigate]

Well they are diffrent even though I listen to soundtests on phone

[paper bloom]

Depends on the speaker and allat

To me it sounds pureform as it is so idk

[glacial wind]

He might have specific speaker/headphones with heavy bass or something that muddies everything

Since the two soundtests sound extremely different

[paper bloom]

Then its either EQ or the drivers then idk

[rough hedge]

yes, it comes with the daughter board

[tidal frigate]

Or just ears are broken

[paper bloom]

O good shit

[paper bloom]

HELP THE FLASHBANGS ITS RINGING IN MY EARS

IT GOES EEEEEEE

[stoic ocean]

https://www.youtube.com/live/xGoIpioMveA?si=5HSVl6TbOe2ayUDL

[paper bloom]

O gasket mount tofu

[glacial wind]

man it's pretty crazy geons store always sells out every wooting batch

i thought it was have slowed down after initial wave but he still sells out all the batches he gets sent

[paper bloom]

Welcome to the life of the wooting glazers

Yes

So long as it has a + stem ur good to go

So go for it

I mean i use cherry

The majority of the popular stuff is cherry format

More taller and more rounder compared to cherrys by lime 1mm

And yeah cuz of the rounder sides and allat

Even the height too

Just check the chart and check both styles compared the height

I mean what are you usually looking for in a keycap

[regal sedge]

https://cdn.discordapp.com/attachments/167181566978555904/1443832244342095883/78599960677__92E61196-A64A-4CA9-AF99-ED26DEA2DFE3.mov?ex=692a8110&is=69292f90&hm=5508dda1c813f0cb62686bd0320f064b9ffb6a8a6e6eb451379b1bcf8ae221cc&

[paper bloom]

Ok its probs something under

[regal sedge]

maybe the JST cable if anything then

but i did fit it thru the little clip provided

[glacial wind]

might be something off with the tuning then if you're finding those 2 similar

i can get some of the others but those 2 are very different sounding

yeah tikkens and flux are no where close

[robust siren]

i have tikkens vs fluxes but theyre on different keycaps

#🔧│keyboard_modding message

[glacial wind]

some speakers might just not be tuned or positioned well

if you have in ears use them and you'll probably notice how different they are

[robust siren]

i forgot to factor in pbt and abs keycaps in this

[glacial wind]

for example if I use my crummy mac studio speakers everything sounds the same, but if i use headphones or iems i can instantly hear the difference

[paper bloom]

Works yea

Usually the drivers in IEMs

Makes a difference

[robust siren]

@meager rain really scuffed comparison, just pay attention to first and 4th switch #🔧│keyboard_modding message

it gets worse with white

dont ask me how i know

[paper bloom]

The wooting one has it as well

Its all better with black if you ask me if anything you could run cherry and use novelty keycaps for DE

Yea its normal for IEMS since it has different drivers

[paper bloom]

Yo what IEMs you running

[glacial wind]

on headphones right now

[paper bloom]

O shit what headphones

[glacial wind]

490 pros

[paper bloom]

Yoo thats nice

[paper bloom]

Im running the crincle Moondrop dusk 2 and the inzone H9 ii

[tawdry tree]

It is, yeah. “P2” isn’t exactly a material, it’s just what HMX call it.

I’m very curious to try these, they’re pretty unique. TTC 035s, flatline force curve (i.e requiring the same force for initial and bottom out) 🔥🔥

Well, unique until Gateron releases theirs..

[robust siren]

iems > headphones

[paper bloom]

LMAO

[robust siren]

headset dents are fun

[paper bloom]

I dont get that since i dont wear it PRO LONG

[robust siren]

personally i have an issue with headphone bands and also ears just getting overly warm

2nd issue can probably be fixed if i got open backs

[paper bloom]

Idk you but i dont get this with the inzones and it fits perfectly in my ears

[robust siren]

most headsets ive used are hyperx and one razer
doesnt really set a high bar to compare my iems to lmao

[paper bloom]

• The bands is kinda chill esp for elasticc since im not tugging on it that HARD

[paper bloom]

I mean ofc, but coming from using those 2 id still pick the moondrop over the headphones

The only reason im doing so is cuz its wireless and im too lazy to constantly nearly avoid near IEM damage and falls

Considering the fact that i broke the fucking floor with the IEM denting the wood 🗿

^Still works btw

[robust siren]

how soft is your flooring or well more like what material was your iem made from 😭

[regal sedge]

bros house gonna collapse

[paper bloom]

https://moondroplab.com/en/products/dusk

[robust siren]

bros got the nokia of iems

[paper bloom]

Its CNC FORGED CARBON FIBER faceplate

with a few probs plastic mold injections

But that shit fucking dented the floor

[robust siren]

forged carbon 🥀

resin

[paper bloom]

Yea still dented it either way 🗿

[regal sedge]

that’s good to know

i planned on getting a pair of those soon

[paper bloom]

i alrdy got'em lmk if u got any questions on it ig

My DAC is an fosi k7

[regal sedge]

do i still need a dac if imma be plugging it into my focsurite

[robust siren]

jesus these cost more than my astrals

[paper bloom]

nah its enough to power

[paper bloom]

Yea maybe next year im getting another pair again or something else

But i love the dusk too much

[regal sedge]

https://tenor.com/view/yellow-dragon-nailong-gif-14713437061066074768

[robust siren]

iems are really easy to drive

[regal sedge]

actually i might just hold off i’ve bought too many random bullshit this month

[paper bloom]

They are yea

[robust siren]

nah you need to get the moondrop dawn pro 2 dac/amp

[regal sedge]

i’ll find where you live and take all ur stuff

https://tenor.com/view/scream-loud-scream-girl-kid-hispanic-girl-gif-3761151244536557927

[robust siren]

at least its on sale

buying it now just means saving money

thats clearly how money works

💯

[paper bloom]

Bro where u from

[regal sedge]

but if i wait longer it might decrease in price e😭

[paper bloom]

If ur in singapore

[robust siren]

$50 is matching the lowest its ever been

[paper bloom]

i cld sell u my Moondrop

used

LOLL

Then next month i go get a new one

😂

[regal sedge]

bro across the world from me

[paper bloom]

LLOLOLOL

[robust siren]

used earbuds

[paper bloom]

no you'll a cleaned ver of it and without ear tips

[regal sedge]

calm down buckoroo rn not the time 😭✌🏻

[robust siren]

https://tenor.com/view/bee-funny-eyes-shrug-meme-gif-16164091488493183075

[regal sedge]

https://tenor.com/view/cat-side-eye-gif-5016118126108679217

[paper bloom]

matter of fact

ive met the legend himself

crincle in a ice cream store LOL

[robust siren]

https://tenor.com/view/mike-tyson-contract-gif-12557538628345171285

[regal sedge]

https://tenor.com/view/akira-leave-me-alone-leave-me-alone-meme-gif-6420351794930725971

[glacial wind]

iems are great for value, but they're not as comfortable as top tier headphones for me after 5 hours of editing

you kind of force your ears to get used to them and it's usable, but comfy headphones still nicer for long editing

[paper bloom]

What iems do u run

Before swapping

i usually dont get this as odd as it sounds

[glacial wind]

aful performer 8

[paper bloom]

its probs cuz of the ear shape of the IEM's

[glacial wind]

nah i have like 5 different iems

they all get sore in different ways after long term usage. Not painful that i can't use them but just not as comfortable after 5 hours

[paper bloom]

o i c yeah ok nvm i get those too then

[glacial wind]

meanwhile i can wear headphones for 7 hours and still super comfy entire time

[paper bloom]

Agreed

[robust siren]

i only keep my wireless hyperx around for sim racing

[glacial wind]

only downside of headphones for me is they're more of a pain to keep clean

have to wipe down the pads every day if you have oily skin

otherwise it gets nasty

that and headphone hair

[paper bloom]

I usually clean my headset once a month

at the very least because id shower and allat before using

So maintenance isnt an issue

[robust siren]

wet hair and headphones are the bane of my existence

[paper bloom]

LOL

[robust siren]

i don’t like blow drying my hair and rather just have it dry out normally

[paper bloom]

i just dry it with a towel and it solves all of my issues

Since i dont have long hair

[robust siren]

i wouldn’t consider my hair to be long either

but i do think using headphones with damp/ wet hair caused me a bunch of issues

[paper bloom]

BRUH im running spiky hair

But ig it depends on how u dry it, being too damp will cause problems

in the long run

[robust siren]

it’s why i started using iems last year or earlier this year

speaking of hair i should get a haircut soon

i told myself i was gonna get one 2 weeks ago and still havent

[tawdry tree]

Early Bird discount for anyone that wants to try these, pretty cheap. These are the new ones with an encapsulated magnet, similar to the Gateron Sparks: https://a.aliexpress.com/_EwEcKtS

[glacial wind]

ew 3.2mm as well

everyone too cheap to just make a new mold so they can make it not 3.2mm

[tawdry tree]

I’ve seen more people looking for smaller travel switches than bigger travel, it seems to be popular for some reason.

[robust siren]

what it sound like

https://tenor.com/view/monka-cat-scared-scared-cat-wide-eyes-gif-5319946494583553667

[tawdry tree]

go buy

and rec an st

[glacial wind]

i don't trust unionwell to do these well but we'll see

their stock lubing wasn't as good as gaterons on their split stems before

[robust siren]

they’re nearly as expensive as fluxes

https://tenor.com/view/pepe-nope-gif-8333205597944379914

[glacial wind]

3.2mm is a bit too much for me. I like the sound of the sparks but they're so much noticably shorter travel that it's a bit too much for me

[uneven cradle]

If you make the stem shorter you can have a more stable switch next up 0.5mm switches

[glacial wind]

i'm more interested in ttc/gateron next gen stuff that's at least keeping 3.5mm with split stem

[tawdry tree]

it’s got dual diffusers bro, double rgb = double performance

[robust siren]

i dont even use rgb with the sojus

[glacial wind]

i'll pick up some next month, i used up all my switch budget this month already and don't want to have to put in a request lol

[tawdry tree]

saw these?

they actually measured the force curve

and it works

[glacial wind]

yeah i'm actually curious to know who came up with the idea first between ttc and gateron

[tawdry tree]

if either of them did, it would probably be patented already lmao

I wonder why raesha didn’t patent the split stem

maybe they couldn’t for some reason

[glacial wind]

or just somehow both had the idea in similar timeframe maybe as well, because i know at wooting that idea was discussed at one point as well but we don't have the fast track switch making process like these guys

at some point they both definitely got wind that the other was making it though, because no way they both scheduled announcements right next to each other lol

[tawdry tree]

both gat and ttc seem to be meta patent farming companies lol

as for most switch manues tbh

[ionic breach]

damn

[tawdry tree]

TTC makes closed bottoms sound like the invention of the century 💀💀

[glacial wind]

all i ask is they please lube their switches

if their next gen split stem mag lev thing is amazing but no lube i'm going to be sad

[tawdry tree]

This is what I mean, all these companies are literally patent farming like their lives depend on it (they might), also ts was already patented by lcet 😭

[paper bloom]

Ya fair

[glacial wind]

Good news friends - i had a meeting with our switch selector folk and we will be adding 12 switches to our selector soon-ish (speed depends on how fast I can select and get those 12 switches to the people who need it basically)

also we're working on an even more accurate model for switch selector that may not even need selecting a specific switch, but that's still in testing to see if our development path for that idea is right/works

[chilly mural]

Crinear reference

Using the 7hz divine as of recently and it's a pretty well balanced IEM with really good separation.

I can imagine the reference being close to that since it's the same kind of tuning ish. Maybe more relaxed treble.

[paper bloom]

The crinear i am using is more warm

To the 7hz divine

If im not wrong

[chilly mural]

Daybreak? Yeah, it has a bit more bass

[paper bloom]

Na the dusk 2

[chilly mural]

That's too similar lmao

[paper bloom]

lmao wtf zamn

[full tundra]

has anyone had problems with yikb stabs not fitting custom plate?

[glacial wind]

If you copied the wooting plate it won’t fit

For v1 and 60he+ anyway. For v2 it won’t be an issue

[full tundra]

i got a 80he fr4 plate from torontokeyboardman, idk if that says anything

[glacial wind]

Oh that should fit

80he doesn’t have fitting issues there

[full tundra]

idk when i tried to install the plate it just wouldn't fit. But the stock wooting stabs work fine

[thorn yew]

Good Morning guys

How is everyone doing?

[glacial wind]

Likely an installation error somewhere

Several of us have those plates bought from aliexpress instead of that reseller in Canada and they do fit fine

[full tundra]

hmm, i'll give it another try later today. Thanks for the info

[glacial wind]

Initial selections so far for first 12 switches to be added to switch selector v1:

• Wuque flux deep clack
• gateron jade ultra
• owlab ti he
• mmd c1
• phylina thunderflash white/pro
• ur ice ultra
• raptor v2

Still thinking about the remaining 5

I’d like to add the new ttc and gateron mag lev but no idea when those will even be available

[fallen pecan]

ttc one already for sale on tb

[glacial wind]

Yeah ttc one maybe I can grab there

[chilly mural]

Tecsee he?

[glacial wind]

Although good lord I hate using taobao

[glacial wind]

Yeah that might be one, I’ve been deciding on if silent switches even need to be added there since they’re inherently not for stability and accuracy anyway

[chilly mural]

it has linear and tactile ver iirc

though prop still the same magnet wise

[glacial wind]

Yeah the problem is any dampened switches are already unstable at the ends and even switch selector doesn’t fully fix that

so I’m not sure if it’s even worth adding them

[chilly mural]

hmm, no clue what else

[fallen pecan]

i personally wouldnt even bother with the non mainstream ones

[chilly mural]

maybe raptor v1 for funsies

[glacial wind]

Maybe I throw in unionwell polar pro but I don’t even think those are popular outside of China

[peak breach]

Nah, that might cause confusion

[full tundra]

@glacial wind Idk how to take a picture of this but it’s just not fitting

[chilly mural]

tbh, there might still be a lot of people using raptor v1 from the 'cheater switch' video

[sacred elm]

oof

[full tundra]

Yeah it might be wraps

[sacred elm]

can you link that plate?

[sacred elm]

They'll use LekkerV1/V2 option in the switch selector, so basically auto-calibration

[glacial wind]

I might throw in some older stuff like gateron jade pro just cause probably a ton of people still using those

[full night]

who wins. pbtfans vs gmk? pursuate me

[sacred elm]

no need to add another version of Raptors

[chilly mural]

Umu. Good enough I guess

[sacred elm]

Yeah, Jade Pro I think has slightly different magnet than Jade so probably worth it

[full tundra]

https://torontokeyboardman.ca/products/wooting-80he-modding-kit?_pos=1&_sid=b52152e99&_ss=r&variant=44513538605251

[sacred elm]

What about Herz

[paper bloom]

I COOKED

LETS GOOOO

[glacial wind]

Herz I don’t even know if it’s popular outside of niche enthusiast discords

feels like most people just bought the owlab or ur ice instead

[sacred elm]

Then add 10 for now? those 7 + Jade Pro, Jade Ruby and Polar Pro

[jade narwhal]

what about taishan/gt version

[glacial wind]

Do people actually buy those?

I’m not sure we even have anyone here who bought them lol

Outside of myself for sound testing

[thorn yew]

@humble surge BROOOO THEY CAME THE SWITCHES ARE HEREEEEE

[humble surge]

LETS GOOOOOOOOO

[thorn yew]

BOOOOOOOOM

Ok Imma take one out

Bro the feel really smooth

Wow

I feel like I'm doing this right now

There's barely any sound

First Impression 8.5/10

[glacial wind]

Oh I guess I could add the updated unionwell enclosed split stem

[humble surge]

Oi, not sure if this is new, but just noticed.
This fits the 60HE v2 split no?

[glacial wind]

Yeah

[humble surge]

Pog

[paper bison]

what size is the center key of split spacebar

[glacial wind]

1.25u

[paper bison]

okay perfect

got a black 1.25u and just ordered a 2.25u and 2.75u

[humble surge]

I wonder if i pull the trigger on Cera now 🤔

[dull basin]

is the original 80he daughterboard better than the gt80's daughterboard add on or are they similar in quality?

[glacial wind]

Iirc there was some initial issue with some gt80 ones but I believe that was fixed

it shouldn’t matter but I don’t know why you wouldn’t just use the Wooting one that works fine and that you get for $10 with the case and wire anyway

[dull basin]

it's because I haven't bought anything yet but tbh yea i should just get the plastic case

[glacial wind]

Yeah you need the usb cable anyway so for $10 with module you get the spare plastic case, usb cable and daughter board

[left ermine]

are most pbt keycaps good?

[glacial wind]

Depends on brand

Some can be scuffed printing or warped, just depends on where and who makes them

[paper bloom]

Similar quality now

Actually idk

[glacial wind]

btw send it in this chat, not dms. I don't do support via dm

if you just post here people can tell you

[left ermine]

post link or image or name?

[chilly mural]

Both can do

[left ermine]

i think if u search this up it would pop up
Gliging 135 Keys PBT Japanese Keycaps

[hot linden]

Which switches are these?

[thorn yew]

MMD C1’s

[hot linden]

are they better than Lekker Tikken Medium?

[thorn yew]

I don’t have the Tikkens and I didn’t try the C1’s yet so not sure

I only have the L45’s

But when I got one switch and pressed it it felt smooth

[mental salmon]

Sno have you tried the Tikkens with lighter springs?

[glacial wind]

nope, I didn’t want to lose the long spring so haven’t spring swapped mine

[sacred elm]

They felt great with Orchid(🤮) 22mm springs

[hot linden]

• Wooting 60HE v2 Module ISO
• KBDfans Holy60 case Aluminum material Tray-mount
• Lekker Tikken Medium
• YMDK 134 Spider Web Keycaps for Mechanical MX Keyboards TKL Akko with Side Illuminated Cherry Profile

Will this build work or any recommendations to change?

[thorn yew]

Looks good man

I think I will also start to work on the switches now

Like sound test

[paper bison]

holy aliexpress

[hazy harness]

Hi, I am trying out modding first time. Ordered the 60hev2 module and holy60 case, deciding between the tikkens and owlab ti's for switches. Keycaps im not sure on yet either. Also ordered some lube and was wondering if there was anything else reccomended that I am missing, thanks

[calm pulsar]

1st

[tropic urchin]

https://tenor.com/view/philip-de-franco-package-attention-you-ordered-enjoy-gif-16593723

[calm pulsar]

silber case looks kinda nice

in an optimum video at least

[glacial wind]

I wonder which fun60 optimum used for that 5ms slower test

[tawdry tree]

You’re using Typeplus (PCB mounted) stabilizers with a plate that supports plate mounted stabilizers. There are only a few PCB mounted stabilizers that fit through plate mount holes, like the SW Knights for example. So you can buy those stabs, or use your old plate/get a custom plate made.

[tawdry tree]

Herz should be the exact same as Ti HEs in every way.

[tawdry tree]

Cam 😭

[fallen pecan]

the pro sku, which is pretty bad

[glacial wind]

Oh he bought the plate mounted version instead of pcb mount? Tragedy

[fallen pecan]

doesnt stop him from including an affiliate link in the desc tho

[tawdry tree]

true lol

[fallen pecan]

apparently the 60hev2 can't be modded lol

nvm, x means yes

[tawdry tree]

I don’t really get why the fun60 gets any “praise” at all

the WIN60 is the same price, even in the US afaik

[fallen pecan]

prolly just aula doing less advertising in the western part of the world

[humble surge]

Do you have the link to this chart? been trying to find it a few times, but i just can't seem to

[humble surge]

Not a picture, but the source, so i can look on my freetime, rather than waiting for others to post it

[fallen pecan]

https://www.bilibili.com/opus/1137567872748355607?spm_id_from=333.1387.0.0

[humble surge]

Much appreciated Jabber!

[cyan lark]

It seemed like a really strange comparison to bring out so explicitly, with affiliate links. Saying you can buy cheaper boards, or that it's a premium product makes sense, but putting in an ad for another board at the same time is a choice.

[tawdry tree]

If you go to his channel, he has videos on his testing methodology too, it’s pretty interesting.

[cyan lark]

Integrity < $

[humble surge]

I will try, but i don't know bilibili well enough to navigate it, afterall i have been over it countless times, and i couldn't find this on my own (which is rare).

[tawdry tree]

He doesn’t seem to care as much about keyboards as he does PCs, haha.

It’s a weird comparison, for sure.

If it was a comparison to begin with, he should’ve gotten some other boards in there as well.

[humble surge]

Not sure who exactly is being discussed, but based on observation, that kinda sucks.

[tawdry tree]

Yeah, I’ve had little success with trying to find a video that I was looking for. Finding general reviews on boards is easy enough though, and I get pretty far just off of recommendations.

[tawdry tree]

Optimum and his latest vid on the 60HE v2.

[robust siren]

optimumummm

[chilly mural]

Would've like it more if he compares it with the original 60he.

[humble surge]

I'm gonna keep checking when i have time. Sadly both of my rest days i was constantly busy :/

[humble surge]

Ahh okay, i never heard of him before, but from the little i did hear in this Discord, i was first lead to beleive he was okay.
Now to be reading that he really isn't.

I guess i missed nothing ^^

[trail bane]

https://tenor.com/view/uhm-meeting2-hmm-meeting-hmm-pepe-pepe-meeting-gif-18064240235739253690

[tawdry tree]

He’s fine, just some of his vids are kinda questionable.

Especially those on keyboards 😭

[tawdry tree]

https://tenor.com/view/david-bowie-world-carrying-the-world-in-his-back-fame-serious-moonlight-tour-gif-9210844922471005022

[robust siren]

you ABOSLUTELY NEED THIS 720HZ MONITOR

[cyan lark]

I will agree with him on upgrading from 60HEv1 -> 60HEv2 not being worth it**
** unless you are going split

[humble surge]

Sounds like a mixxed bag, i think i'll just not bother checking his content at all tbh.
Not that i needed more sources to begin with.

[tawdry tree]

AND THIS 20gram MOUSE!!!

bro started the min-max revolution but doesn’t mix-max with his keyboards 😭😭

[robust siren]

why this $3000 vr headset is the best for sim racing!!

[tawdry tree]

Raw HEs in 2025 😭😭😭

[humble surge]

Sounds like general YouTuber titles tbh, nothing shocking at this point

[cyan lark]

This did hurt my soul a bit

Not even wobble maxxing 🙄

[tawdry tree]

same bro

[humble surge]

Sadly it goes for alot of channels, even your favorite one is semi forced to do "catchy titles" and "catchy thumbnails" today to get the views.

[cyan lark]

I don't think his stuff is terrible, I just feel like I walk away from it giving it side eye more often than I'd like

[paper bloom]

I mean raw he is reliable

Ig he prefers something cheap and good ol reliable

[humble surge]

I don't know like i said, i only heard here first, but probably a waste of my time based on the feedback.

[full tundra]

Could u give me a link to the knight stabs u mentioned? Thanks!

[tawdry tree]

I like his stuff on SFF builds and his manufacturing journey too.

[paper bloom]

20gram mice when

[tawdry tree]

Lekker V1s are reliable 😭

[paper bloom]

O wait zero gravity when

I mean shittt for v1 price point ig yea but u cant still beat the wobble on raws

Now im geon raws maxxing

[humble surge]

Happy for ya :)
I have a regular (or a few in reality) i watch for those for years now.

[tawdry tree]

Eh, not sure who has them in stock in your region, they should be pretty easy to find though. If you search SW Knight V2, V3 or V4(?) stabilizers.

[paper bloom]

V4 is highly recommended or typeplus

[cyan lark]

You definitely can though - Ti HE is, I'd argue, the successor to raws at the same price point

[paper bloom]

I agree with that motion but hey to each of their own

[robust siren]

owlab swtiches also dont have the stickyness at the top like the geon raws do

[paper bloom]

Yeah ive tried owlti too

[robust siren]

still noticable after a year of useage

[full tundra]

https://deltakeyco.com/en-se/products/sw-knight-stabilizers-v4 These are the correct ones right?

[tawdry tree]

He has Typeplus atm, but TorotoKeyboardMan’s plates have plate mount holes 😕

[cyan lark]

Yeah the sticking was the part for me that made me move off of raws quickly

[paper bloom]

Time to take the drill

[tawdry tree]

That’s right, but DeltaKey is in France, so don’t think that’s a good option.

[paper bloom]

Where he from?

[full tundra]

i’m from sweden so it should be all good

[paper bloom]

Oh then yeah hf with VAT

[paper bloom]

These cook

And shld be the same price wih typleus

With*

[tawdry tree]

No way you ordered your plate from there bro 😭

how much did u pay in shipping?

[robust siren]

https://tenor.com/view/fail-outside-sweden-anomaly-papanomaly-gif-11321118866001380109

[full tundra]

a lot bro 😿

[paper bloom]

Man anamoly is a banger

[tawdry tree]

Whyyy? 😭😭

[paper bloom]

Anomoly*

[tawdry tree]

You can get them off ali for cheaper

[robust siren]

anomoly + dad combo is deadly
theyre funny together

[paper bloom]

I agree

[full tundra]

I couldn’t find a black fr4 plate for iso

[paper bloom]

Missed the time when they tried summestroming

[paper bloom]

Rip ur shipping

Alrdy got myself the deep clack ws for the 60he build

[robust siren]

less than 2 weeks until the first 60he v2 ships to customers

[paper bloom]

The u and i will build on it

And compare cuz i got the holy60 on standby

[robust siren]

no foam kbdfans gt-60 here

[tawdry tree]

You can probably ask a seller on Ali to make one for you, should cost the same.

[paper bloom]

No balls do cardboard plate

[tawdry tree]

Probably cheaper than buying those stabs

[paper bloom]

Or cardboard foam

Ive done it b4 its fucking banger af

[robust siren]

so like id actually be able to cut that but i cant cut my CF plate for split spacebar

[paper bloom]

Use it as foam below

But make sure it can breathe

[full tundra]

Might give that a shot if i decide to try another plate, but i’m most likely done modding my keyboard soon

[paper bloom]

Or use it like an poron foam

In between

[robust siren]

mm

lemme show what im currently using

easy enough to take apart rq

[paper bloom]

Ill show u something cool a friend here did

The cardboard wooting case

[robust siren]

oh wait nvm i cant share it now

i gotta get another screw driver and idk where it is

[paper bloom]

Coins

👍

[robust siren]

not even close to being thin enough

[paper bloom]

Uhh shit

Paper

[chilly mural]

1 layer carbon

[robust siren]

lightwork

[chilly mural]

naisu

[paper bloom]

Nice

[robust siren]

this is why i use it with no case foam

[paper bloom]

Mf on that sandwich foam

But its silicone

Jo wonder its thocky

[dull basin]

is it worth it to get the gt80 over the zinc alloy? (total would be around £40 more)

[paper bloom]

If u ask me

Zinc is not the best idea

Get the gt80 its cheaper

[static aurora]

Definitely prefer the GT-80 over the zinc case.

[paper bloom]

This is coming from a zinc user btw

I was gonna fucking color it and run suisei caps but

Fuck that process so i went with holy60 silver for my nxt build

With suisei caps

Hopefully u learn from my shitty mistakes unless u wanna go thru hell

[winter glade]

hey guy's and gal's i was hoping i could get some advice... i got the wooting 60he+ and the uwu as the prebuilt model and fell in love with this keyboard... now i want to preorder the wooting 60he+ v2 but i was thinking of going the module route this time but i was trying to figure out the switches... i mainly play a lot of fps like R6, Bf6, and pubg. i was just wondering i have my actuation point set to 0.1mm and the rapid trigger is set to activate at 0.15 mm and deactivate at 0.20 mm. anyways so i was looking at the switch's and couldn't figure out if i should run Lekker switch - Linear45 (L45) v2 or Wooting x TTC KOM - RGB switch or if there's a better option than those like GEON Raw HE Switch Linear 50.0gf... so i was hoping to get some input/info on what you would recommend if you were trying to go for speed/ performance?

[paper bloom]

Then go het it

Get tikkens

[winter glade]

?

[paper bloom]

If ur going for the wooting side

Tikkens is the way to go

Theres RAW he RAPTOR v2 WS switches and jades

If ur asking me for a balance of performance and allat, get tikkens

[humble surge]

GT-80

[paper bloom]

@winter glade

Hopefully it solves it all

No point to run TTC koms anyway too expensive

Lekker v2s are those that wanna use it but if anything tikkens does it justice

Jades are og same with raws but theyre reliable i owned jade pros and raw he, if ur on a budget

Tikkens or OWLTI switches is the way forward

OwlTi uses r0g

40g*

[paper bloom]

If u go for the options but no kf these choices can go wrong

[sacred elm]

Switches have same performance, it's all about sound and feel. I'd recommend checking out this site for sound tests, wobble ratings and other specs: https://link.wooting.io/soundtests

[dull basin]

how do the sounds of raw he and tikkens differ to you? i can't really tell the difference between them from reviews

[paper bloom]

Follow whay shafie sent

Wont go wrong

Sound and feel depends

I dont have tikkens but i got raws jades

And raptor he v2

So ik the feelings of each

[winter glade]

so like if the switches all have the same performance what's the difference between a l60 and a l45?

[paper bloom]

Weight

U push the keys

60 gram of force 45 gram of force

[Ending force]

[sacred elm]

Spring weight

[paper bloom]

Initial is higher for 60 than 45

[winter glade]

ok so then they do preform differently?

[sacred elm]

If you're getting 60HE v2, I wouldn't recommend getting Lekker v2s, because you can get new Lekker Tikken switches. They're 50% off with the v2 module.

[sacred elm]

They do not.

[paper bloom]

I mean shit if ur a fps

[sacred elm]

You have adjustable actuation point and rapid trigger, spring weight doesn't matter

[paper bloom]

Player get l45

If u love fast and smooth

Or any

Thats light

[paper bloom]

And what he said

[winter glade]

so there is no difference in between the switchs? but the springs and switchs preform differently? and im not trying to just ask about what switch i should buy

[trail bane]

Hmmm maybe should I

[paper bloom]

Tikkens

Owlti HE SWITCHES

Or get the WS deep clacky ones

E z

For the last time get tikkens

Better for ur wallet

Do i need to aura glaze it?

@sacred elm please be my supervisor

Sales man ast cardboard man here

[humble surge]

not bad

[trail bane]

Huh 180

[sacred elm]

I mean Tikkens cost $20 with the v2 module, can't beat that. You can get different switches later if you don't like something.

[winter glade]

i was trying to see what the general difference between switch's was/ ppls opinion, on which would be better for performance and speed based upon the relevant info i got from them XD im a spec guy

[paper bloom]

Dude

Im also a spec guy

Me and shafie are spec guys

No matter how much blueprints or

Whatever comes out youll never use it or get it to test

[mental salmon]

Do you have a current keyboard you like how heavy/light its switches are? That could be a good indicator about the switches you need in terms of actuation force

[paper bloom]

Dude is cracked on performance

His like the one guy from topgun lime maverick bro

[sacred elm]

Already told you that switches have same performance

[paper bloom]

Just give him the tikkens were done

[winter glade]

i was just wondering i have my actuation point set to 0.1mm and the rapid trigger is set to activate at 0.15 mm and deactivate at 0.20 mm. anyways so i was looking at the switch's and couldn't figure out if i should run Lekker switch - Linear45 (L45) v2 or Wooting x TTC KOM - RGB switch or if there's a better option than those like GEON Raw HE Switch Linear 50.0gf... so i was hoping to get some input/info on what you would recommend if you were trying to go for speed/ performance?

[paper bloom]

YSS

It will cook

For the last time

Tikkens

ALL SOFTWARE ON WOOTILITY WORKS ON ALLAT

[mental salmon]

If he likes 55g actuation force Tikkens, if prefer lighter TI HE 40g

[trail bane]

Oh nvm i thought it was cheaper if we’re converting into usd

[paper bloom]

HOLY SHIT BRO

GET THE TIKKENS SAVE UR WALLET

SAVE ME AND THIS EARTH

[winter glade]

you say that.... but just the fact the springs preform differently between a l60 and a l45 just proves there is a difference

[paper bloom]

GET TIKKENS

[paper bloom]

Physics wise yeah

But u want get lightwe weight

Lighter*

[humble surge]

No, that's just literally the converted price for presentation

[paper bloom]

For the lazt time

[humble surge]

Cause noone thinks in zloty

[winter glade]

and my wallet isnt influencing my decision so i dont know why you keep bringing it up XD

[humble surge]

people care more about your money than you do nowadays