#🌟│wooting80he
1 messages · Page 338 of 1
you mean the face with soundwaves infront of it?
yes
Nah, it happens to everyone and you have to learn somewhere 😄
🗣️🗣️
I ended up putting in the typeplus yikb stabilizers that a lot of folks here recommended. They feel great, a little finicky to install but once you figure it out not too bad
wooting knobs before no game no season 2
What's this yellow switch?
L45
This is the new and improved Lekker L45 V2 switch with even more lube and an upgraded housing.
Are they better then the Lekker V2?
Same thing, just different spring weight
there's both a L45 and L60 V2
Yellows are lighter
Yeah I didn't see much of a difference on the site . Got the L60 v2 rn
in the end it comes down to your preference what kind of weight you like more
Alright, and for keyboard modding do I need a daughterboard is is that already included
Comes with the case
Cool gonna order another case then :3
Hi guys, any particular reason there is only a wooting80he channel and not one for the 2HE and/or 60he? I have a 2HE related question, which is why I'm checking for the right channel.
Yes. They're not the newest product.
We archived product channels as time passes, cause there's not as much need for discussion specific to them, or a large influx of people asking about them specifically.
Perhaps you can help me, unless the product I just bought is too old (':
Yesterday I ordered a 2HE. Now I see they have V2 switches for sale. However I'm unsure if the 2HE already has the newer ones or if it uses the older ones.
They dont have v2, iirc they have v1.5
Which between v2 and 1.5 not much of a difference
I would suggest going aftermarket switches if you are wanting to buy new ones
Or waiting for wootings new switches to release (lekker tikken)
Which ones do you recommend?
Owlabs ti he are very good, and priced very well
the only 'upgrade' I bought are the double shot keycaps
I use them myself
Factory lubing is great no need to hand lube, cough cough ttc switches
Would you recommend the 40g or 50g 's?
Do you find your current switches weight to feel good or would you prefer lighter.
50g is definitely the safer option but 40g are nice if you want lighter
Currently i'm still on my razer blackwidow v3. Wooting 2HE is still underway 🙂 only ordered yesterday
I went with 50g for mine
current switches feel okay, could maybe be a tad lighter
Which one is it the huntsman or blackwidow
the blackwidow
Thanks, solid advice 🙂
And you will certainly be happy with the ti hes, very nice sound with great stability
I can only purchase 10 at a time?? Is this normal?
They come in packs, so for a 2he you would want iirc 12 packs
Let me confirm that rq thi
11 packs*
oh my bad, I feel stupid, it says so below (':
"This means 1 PACK = 10 SWITCHES"
Orders 1100 switches

Thanks for pointing that out. Nearly ordered 1100 switches (':
Already found it suspeciously pricey
You wanna see pricey switches checkout the ws flux...
2$ per switch
And the worst part is they have quality issues
Thats crazy expensive!
220 usd for a 2hes worth😭
If I'm correct the 2HE has 108 keys in total?
it's a shame I can only buy 10 packs
Yup definitely 108
He was just doing a group buy 🤣
If you buy the whole stock you can control the prices 
You're on to something, time to buy out popular switches 
Owlab x Implorator Collab switches coming soon
hey sorry can i ask, i tried the owlab both 40g and 50g and feel like its too light for me, do you have any recomm switch upgrade that have similar feel like lekker 60 (v1.5) (the weight/force)
i want to upgrade to better switch that have 3.4mm actuation. should i go with geon raw he 60g?
You can spring swap Owlab switches
Get 60g lekker springs from wooting
I can't buy directly from the Wooting store because the customs clearance/tax regulations in my country are very complicated😔
Where are you from?
indonesia

We ship plenty of orders to Indonesia, so that sounds like a bad excuse more than anything.
get Geon Pingless HE springs from tokopedia
Theres 62.5g option
I have 60s but for my pinky bc I try to crouch peak like primmie (poorly) in valorant I have the 45s
i dunno, i like my l45s because they sound better than the 60s.
They sound identical that's what they do.
buy the 400gf on ali

L400 feels nice


there were only 2 left, I had to act fast!
keyboard gonna be worth as much as 1 switch 2
HOLY SHIT I GOT THE LAST ONE LMAO
last white one w/o the front badge to be specific
i think the L60s were the gen1 Lekkers and the L45s are the gen 2 Lekkers. i picked the 45s with my 80HE and bought the 60s at the same time.
the two sets definitely sound different.
L60 v2 and L45 v2 are the same switches, only difference is the spring weight
Spring weight doesnt affect the sound
the v2s werent for sale when the 80HE launched, byt were shipped with the 80HE. so if one pack was the V2s with the board and one as the V1s i bought that would be the difference, which would haver been the case
I got a ghost ping...
dw bout it lmao
I might get these for my cerakey set
I'm using Kailh box Navy rn
Hey, does anyone know when the wooting80he that i just bought will be in stock?
Check the hub.
I assume it was in stock, and you missed it during checkout though?
oh wait it says "partially in stock" expected at warehouse early july 2025
how early is "early"
Partially in stock means nothing by itself. Just means certain items can be OUT OF STOCK. You need to actually pay attention to what the dates say during checkout.
If the estimate is early July on the hub, then that's the date.
@buoyant solstice hey sorry if i buy lekker springs (the l100) and change my l60 switch, does it will change the total travel of the switch? can u enlighten me?
No it just makes the switch harder to push down.
For the travel to change, the entire switch would have to change.
I bought 80HE Module + plastic case + keycaps and ordered Owlab Ti HE 50g from another place. With this message I want to encourage others to not be afraid of ''building it yourself.'' It's super easy and all pieces fit perfectly, I actually tried both Owlab 40g and 50g. The lighter one were a bit too light for me so I sold them.
Thank you wooting for a great product + software. ❤️
Damn that sucks... I hope you had home-good's insurance
nope insurance wont pay
Even with police report?
car was jacked electronically
insurance wont cover because it doesnt count as a break in
Oof
they took my main work and personal computer mouse headphones wooting and passport
That's honestly bullshit. Those are basically the norm these days 😄
so now i got jo WOOTING bro
Time to shop for new insurance on top of everything else I guess 😦
They'll look for any reason to deny, not all too surprising
i have a spare metal wooting case still
idi wgat to do with it
i swapped into a plastic one for travel
True.
INSURANCE COMPANIES when they have to make profit
and not pay people
not surprised honestl
yah do u know how hard it is
to have to sell ur yacht
and rent one instead
because you didnt con thousands of proplr
nano coating an entire yacht is expensive. They'll have to go for regular coating
i nano coat my ball s
Sell it to your own company and then charge rent to yourself and then you can use it as a tax avoidance vehicle 
ah the wework strategy
you can finance that tasty burrito with 12 easy payments
I know someone who does this with their supercars... They own a car rental company for which they are their only customer and can therefore write off expenses such as gas and maintenance but ALSO depreciation
Wild world that the uber rich live in...
thats what the guy from muse does with his guitars lol
We need another Luigi
infinite money generator
yea
i do about nothing ever
i make nothing dollars in nothing income
nothing ever happens
paypal me 30,000 USD
Someone get me the definition of passive
While you're at it, look up scumbag
Rage bait is so weird
I think it more speaks about how much people are willing to appease the people at the top so that they appear better than their peer.
i assume it's fake, just people posting random stuff to make money off tweets
Almost certainly is
Does remind me of the scuzzy MLM shops
Did a summer stint at one in HS
my condolences
Unplug it and plug it back in, don't touch any keys for 5 seconds
hello so I don’t mean to sound weird or smth but why did almost the same people win the giveaway twice?
Do you mean because the Bot updates its old "enter here" message to show the winners? There's no duplicates so far...
nooooo :(
s key going backwards for no reason 😕
I’m brand new to this so plz forgive noob question but I was wanting a build with low profile magnetic jade pro with low profile keycaps cause I love the feel of my nuphy 75 i just want a TKL around 80%, am I cooked?
Not really any options outside of Nuphy and even that's not that low profile
I actually really like the feel of my nuphy 75he with magnetic jade pro so not like Apple low profile, it’s looking like there aren’t any options
does anyone know how to stop my wooting 80he from pressing randomly, i literally just got it 😕
just get low profile caps + low travel switches, the gateron low pros are 3.3mm anyway
Guys can someone help me out I have waited over a month for my wooting and it still hasn’t arrived my friend bought me it and he dosent have discord and I only see him once a week and he showed me the order confirmation but hasn’t come I ordered it on June 1st
You can check your order status in the wooting hub and if it has been shipped you should have a tracking number
But my friend ordered it on his phone
Then ask your friend to check it
Or have him change the email to yours, so you can.
The wooting 80HE Ansi comes with key's pre-installed?
Yes
The Zinc Alloy is very easily scratchable right? This is gonna be a pain to remove
No, the coating is very durable (assuming no defect in the coating binding to the zinc base)
Is there any normal way to get the keys seperately?
actually u know what.. nah its cool. I get more stuff to do then
ANSI always comes preinstalled
I am right now putting a warranty clame for exactly that 😭
Unless you get a module
Was so confused how a microfiber cloth could've done it and then remembered it was zinc coated
eh if mine scratches then id probally buy a new one... Need it for a clean setup for my gf
ah rip
It's a known potential defect, handled under warranty
sounds awesome
Was cleaning it with water and microfiber cloth and it just fell off, not a big chunk but it's on the front and very noticeable. If it was somewhere under or so I wouldn't really care but this scratches my brain so hard I have to submit a warranty claim 😭
There's a video en route to highlight it and talk about how it's being addressed
Ye I know, did my research already
i assume ur keyboard is white aswell?
black
ah
So the scratch is bright
how visible would it be on the white keyboard?
not really
Also it seemed to happen on that part where two thin strips of the case are, I hope u know what I mean
Just under space bar
It'll happen first wherever your skins touches the keyboard more often
What does springs do btw? anyone that can explain it to me? (first time keyboard modder)
Happened to me just under the spacebar, not really sure how or why but I was js cleaning it from the dust and stuff and it just fell off
Stiffness of the keys, makes it harder to press if spring is harder
Sometimes can cause finger fatigue
Sneak peak from an upcoming video 
"sweat"
mhm and do i need lube for the Lekker Linear60 v2
heard that its already pretty creamy
LITERALLY SAME SPOT
Also its prelubed switches from manufactors id assume (ofc not as good as whe nu do it urself but yuh)
well thats gonna be great
this gonna end up being the keyboard (i know theres more keys on the 80he and i got plenty to put on :3
Nice
well she enjoys white and pink
Also thank god I ordered ghost case alongside zinc one
but im risking it with a black n white keyboard to match the rest of the setup... and then a white and pink pc on the side (lian li o11 vision)
ghost case?
im so paranoid that ill forget sum.... maybe i should just order 1 of everything on the website.. easy way to deal with it
PCR plastic one
is that something i need (total noob here btw)
No
ah k
Ah its the option for the outershell i see i see
The case yeah
i just wanted the travel case ngl...
I have both
Travel case is like a box to puit your keyboard in
It's not really moddable no
I mean you can sew some stuff onto it
time to sew her favorite anime girlies (mostly gacha games stuff) onto it
I mean
A travelcase made for the Wooting 80HE
Look here you can see the material here
do u also have the wooting 60he?
I have 2 60HE's, 1 80HE 1 alu case for 60HE and 2 different cases for 80HE
I'll be honest with you I spent like 250€ on that all
Also have 2 wrist rests
do you recommend 60he's?
WUT??? damn
60HE I stopped using
I have one dusting next to me and one to my brother
damn ive got 1 wooting that is on its way... that thing cost me 400 euro
im actually suprised that u got that much for that little. won any giveaway?
Translations
im actually suprised that you got 2 60he's and 1 80he's for 250 euro
well planning on custom modding a 60he at some point but i wanna wait for v2... then id probally buy that and use it as my main setup
I got a lot of credit
sounds comfy
Yeah
just gotta wait for my 80he and ill be the happiest person alive :3
Quite a lot of work ngl
happy wife=happy life
LOL
well shes not my wife yet but yuh...
So true
if wooting keeps her happy then wooting she shall get
btw @reef ruin do u have a wrist rest?
and are they importent? (never used one so id never know)
Ye I do, stopped using it cause it messed my wrist up 😭
owie
But it's good ot prevent carpal
i normally use the armrest
For me I use nothing
damn dont u get tired in ur arms?
ah aighty :3
Very cool
Shame id have to return this and get a ansi layout (keycaps dont fit with iso). But on the bright side then the shipping is pretty fast
Or should i just keep both so i have a backup? Idk tbh
Hmm
Yea sorry I thought they were winning twice 😭 my bad
does anyone know how to stop my wooting 80he from pressing randomly, i literally just got it
try to update firmware
Any suggest for switches for the wooting 80?
Or if is not fix try to troubleshoot and reset it!
what u useing rn?
Owlab Ti
yesh, owlab ti is the safest bet
boys my keyboard have input lag on cs2, u guys know a good fix?=
turn off vsync
in cs2?
idfk man, you are in the wrong chat anyway, if you want help with that stuff go to #1019723042244534282 or #🎮│game
okey calm down little bro, but thank u for directing me
I just wanted to say I just recieved the most goated response to the customer support ever
oh? im listening
what they say?
Got 5 options, first one is full refund and I get to keep the case, 2nd one is gift card in value, 3rd one is plastic case and refund for rest 4th one is plastic case + giftcard. Last one is White case V2 and they pay everything including import tax
are you returning just so you can use the all over print keycaps?
Lowkey steam support
Nah my case broke down
referring to the other person
yeah that seems to be what they tend to do support wise
i guess you pay for what you get, other keyboard brands would just tell you to fuck off and close the ticket 
I mean yeah
guys I turned on the gamepad feature and I can't turn it off, and my keyboard is flagged as disconnected. what the hell?
I reset it and it fixed it but I lost all my settings. 😐
How does one even get carpal?
Ohhh i forget to tell you u need to coppy setting code befor reseting😙
ohh alright my bad I didn't know. Should be written on the reset page btw
Lekker v2 and jade
what about GEON Raw HE Linear i use on my Venom60He and use sound so good! but u have jade i mean jade sound also good!
how on earth do i disable the analog mode? chat gtp saying it should be a global option to disable it. but i cant find any advanced settings on wootility
just reset you keyboard or just make a new profile to not have analog on 🙂
yes i do
U play cs2?
yep
Have u experienced any input lag when u play? when i toggle on certain settings its like some keys stops working.
Nop no input lag at all. all the key working fine.
Btw u useing beta or wootility v5?
what are good quite/silent switches for the 80he?
Haimu (MATHEW) Silents off of AliExpress.
will wooting make a video of the lekker tikken switches in the 80he do you guys think
Most likely
yay
the owlabs ti he sound good but i think im gonna wait for the lekker tikken for my 80he
Yeah bec 0.4 actuation they might be better
80he wrist rest v2 when?
Hey everyone!
I’m about to order the Wooting 80HE (modular version) and I had a quick question about the included contents. On the next page of the checkout process, it offers the Wooting Detachable USB-C Cable Set, and now I’m a bit unsure:
👉 Does the modular version already come with a USB-C cable included?
👉 Is it worth adding the Detachable Cable Set to the order, or is it optional?
👉 Also, are there any other accessories you’d recommend picking up (like keycaps, switches, or anything else)?
Thanks a lot in advance for the help! 🙏
Module comes with USB-C cable
so its the same as the Detachable USB-C Cable Set?
Is the Detachable USB-C Cable Set worth to buy or any other accessories ?
If you like that cable sure, if you dont care then probably no. I would recommend getting other switches instead of that cable
i orderd the jade pro from gateron direct
Jade Pros are good, there are also other good alternatives
everywhere i was reading abt wooting switches they mentoined jade pros were the best. Its my first modular keyboard.
Do u have other recommendations?
Jade Pros are a bit outdated, because there are switches cheaper and better right now. For example Owlab Ti's, cheaper than Jade Pros, they have better stem wobble and they sound similar
Is there a switch that is overall the "best" when u exclude the price
What is the best wooting keyboard switch? There isn't a 'best' and things like sound can be subjective, but there are a few switches that are popular based on different preferences. More in-depth breakdown and sound tests below: Lekker V2 pros: Very cheap when purchased from wooting via prebuilt or in a 70/90 set with
Thank you
Weird because with my 3080 Ti I had input consistency issues on Geometry Dash, but my 9070 XT fixed all of that. Probably because 3080 Ti was displaying at 1440p 359.98Hz while my 9070 XT was diaplaying 1440p 360Hz w/ no microstutters
Otherwise I don't have any input lag issues anymore (for now)
This was with the 80HE as input btw
Anyone know why one of my keys would input multiple times on one press
Like I have no special settings on this one key but it inputs like 4 times when I press it like if I have that one setting with the multiple pressure points
can you get macros with wooting
Mostly no
Are there any good low force he switches for games like valorant with good smoothness I'm trynna crouch aim like primmie
Asking out of curiousity but does the 80he allow for modding? or rather should i? The switches already sound really creamy and i honnestly dont see much to add other than maybe a foam pad or sum... But is that really needed?
Yes, maybe?
#🔧│keyboard_modding
There's a lot of things that you can do, alongside that there's the mindset don't touch it ifi ti works
is there anyone i can talk to i wanna change my order from 60he to the 80he where do i make a ticket for this
You go to the hub and cancel your order.
i got it now thanks
My wootin Keyboard isnt working it
keeps turning off and I Only got I a month ago
drop a ticket into support to help diagnose what's going on - it's still covered under warranty so you'll be taken of https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
Ok thanks
n 
We don't do sales.
And with the ongoing tariff trade war, I wouldn't expect price drops either - on the contrary
Thanks Trump.
you can save up
I don't think wooting will do 80hev2 any time soon so you can just wait
there's also debt, though I rather you to get moneh first.
I have this while using the inferno preset. Why? (New to Wootility) (Software is up to date)
The effect color overrides the base color you have selected
my movement is stoppiong in fortnite with rapid key off on all keys I dont get it
How long is the warranty on the wootin 80he
4 years, 2 years for LEDs
Ok because mine won’t turn on and I have to wait 5-7 business days for they to contact me but I don’t have another keyboard
hqve you already tried the restore in the help menu inside wootility?
Yes
have you checked the jst is inserted fully?
But I just won’t turn on I’m currently using my phone to type this
Yes
I got it a few days ago and it was working but yesterday it just stopped working
Boys my new keyboard, seem to be dropping keys, messing with my movement in cs. and it only occurs when i have the features like rapid fire, snap tap etc etc TURNED ON, anyone have any suggestions why?
If the rt is too sensitive it can accidentaly stop the movements
I set mine to 0.3mm and fixed it for me
yeah i hear u, but it seems to happen when i activate any type of mode. beside the default mode on the keyboard
i lowered hz mode to 1k and tachyon mode on, disabled all rgb
Are you sure your settings just arent too sensitive?
If you set all the settings to lowest possible it can mess with your movement cause you are not used to it/activating and deactivating when you dont mean to
have it on 0.60
And your rapid trigger settings etc?
my rapid trigger is only on wasd and shift with 0.70
Is the problem only with snap tap and rappy snappy?
its with any mode beside the default, then it starts dropping keys and become unresponsive.
Valve has a way of detecting snappy tappy and rappy snappy, they kick you for it so i wouldnt recommend using it
Rapid trigger should be fine tho
im not using it, i want only rapid fire, but keyboard becomes wierd by it
Are you pressing your keys at all in this screenshot?
this is only settings 🙂
Go to your quick settings and take your hands off the keyboard. Do you see any number here?
yeah i think i had my hand on it hahaha
Double check pls
no number bro
Hmm
Do you have issues in any other game?
Tho if you already press in 0.35 with just resting your hand on it, may be part of why it can feel inconsistent at times
I have heavy hands, i know i pressed it.
im very high rank in cs2, But i think i will just not use any modes. activation point with 1 MM is good, and its better than my other keyboard with no rapid fire. Just sucks a little :/
Any idea on this?
Tried in a different fps or similar? Just to see if the issue persists
What do you mean with dropping keys?
In general there can be a week or two getting used to period. It is just much more sensitive now than an older 'regular' keyboard.
Twistzz uses 1.1 AP and rapid Trigger on 0.7 if i remember correctly. You can start from there and see if you get used to it in a week:)
brother the keys will stop responding, like i will strafe right and left then i will suddenly stop.
and it only happens when i use rapid fire or any other feature
beside the default one
and when u play 2100+ on faceit u need very precise movement, if it was me over pressing the keys i would notice
i got so robbed with the cherry mx 🙏
Can you share your profile code with which it happens? I would suggest putting your RT on 1mm and see if it still happens.
I still have a warranty and my keyboard just stopped working and it isn’t my fault do I get a new one or how does the warranty work
if there is no way for you to fix it at home you will get a replacement, just message support on the hub
Ok thanks
try checking if the jst connector isnt loose
Is there somebody who combined the zinc case with ceramic keycaps?
<@&1098943457654997093> ^
can he buy my another 80he?
done thank you!
I wish they would do that instead of sending those weird af msg
thank you!
sorry you had to deal with that
it’s okay it’s not the servers fault 😌
Hey raquel while you‘re at it with the moderating
#💬│general message i dont think this should be here
my windows key isnt working, anyone got any ideas on why only that key wont work?
press fn + win
uhh.. i just pressed the Mode key on the kayboard.(and that solved it)sorry for wasting time :😅
this actually helped now ik how i managed to disable it
That is actually a cool feature. wooting filled with juicy features.
You probably pressed fn + win accidentally
yoyo hi everyone
my 80he is doing this weird cable thing where it blacks out every now and then
is there a way I can ask for a new cable or do I have to buy another one
its probably not the usb cable, check the JST cable inside the keyboard
got it
Its probably loose
Yea make sure JST cable is properly plugged into the PCB
they should had a click to it so it sticks on
Use your nail to push it in the connector
yeah ill open up my kb
guys i have a question why does my keys keep repeating it self after i pressed it once
can anyone recommend me some good stabilizers for 80he ? and foam for KBDfans GT-80 Case ?
Stock stabilizers are good enough, you can lube/tune them and they will be as good as third party stabilizers.
You can use stock 80HE foam in GT80 case or just use polyfill instead of foam.
ok, guess I'll have to relube the stabilizer on the spacebar, its only on the spacebar I'm not happy with tho
https://x.com/s1ckox/status/1941449006300987558
x-ray cable goes so well with ghost 80HE
can anyone help, just got my 80he but i cant alt+f4 in games, i can press windows when in games but cant force quit
Is win Lock enabled?
dont think so, when in a game i can press windows and it appears
Then most likely it's the game that does not allow 'rage quit'. OW does this sometimes
everything buy my keycaps have come lol
hyped for it to finally arrive changing the switches took awhile, ordered the premade bit as the white zinc build it yourself had a wait of like 3 months 
Should the cable on the back be rly hard to wiggle out?
It looks sooo much easier on video
Nvm
Just got it to work right after sending message.
Is there a channel or a page to report visual bugs with the wootility software? I can't find any
it's so prettyyy :3 I just need matching keycaps now :3
The two extra "buttons" are leds under the space bar
will the 80HE support split spacebar, tikken switches and knobs once they are released?
split spacebar no, the rest yes
Does anyone know if Wooting also provides Dutch keycaps for the Wooting 80HE keyboards. I would like to switch from Razer to support a company that originates in my homecountry. So I also have no more reason to use the USA layout. However, I didn't see the Dutch option on the site 👀 Not sure if other Dutchies have found a solution to this?
No such thing as Dutch keycaps.
You either order a prebuilt ANSI board (which is what the Dutch use, all glory to America), which have keycaps preinstalled, or you add them for a DIY board if you want them.
There is actually a Dutch ISO layout, but nobody uses it
Note: These keycaps are designed for north-facing switches. This set is a customized version of the following product: click here. Therefore, this set is non-refundable as per our terms and services. The additional text cannot be transparent or the same colour as the keycaps due to visibility concerns. We recommend sel
but nobody uses it
And that's why we don't talk about it 😄
That's why I don't like talking about ISO in general tbh
Yeah valid. More and more corporate keyboards do seem to go back to it tho. During my internship I got one (I was very confused)
And as the other ISO options were available I thought maybe also the Dutch
(All hail Willempie)
Prins Pils 👌
Are OEM noticeably taller than Cherry? never used OEM before but the shine-through that comes with 80he will be OEM
For me it is, cherry is more comfortable, but that is personal preferrence.
yeah that kinda sucks. i love cherry too
why did they not use cherry for shine through
Pretty tough to find shine through sets that are in cherry profile
Because that wasn't what was offered from our partner at the time.
This is not true. Mansen's explanation makes sense.
every cheap chinese boards on amazon come with shine through PBT nowadays in cherry
not a big deal ofc. can source our own keycaps
I mean they do exist, just not in large quantities and the quality is questionable
Also chances are if it's on Amazon it's on AliExpress for cheaper
Although I guess with the tariff situation that might not be the case at the moment 
Gotta love local post offices making me wait
I ordered it on the 21st last month lol
i mean thats not the worst wait time ever.
i think that a lot of people dont realize how much time and processing has to go on at a post office. especially if you live in a mid sized city or a large metro area, they tend to have not nearly enough locations to cover the volume of people and area that they need to.
i had a wterblock get sent out for delivery 3 days ina row and because im towerd the end of the route, it got taken back to the post office all 3 times, had to go up there and pick it up because they were gunna send it back if i didnt.
It went down from the 10th being the expected day
hey, gettin it a little bit earlier than initially. the keeb is definitely worth the wait.
I just finished assembling my 80he and im noticing issues with my keyboard in wo otility
when I go look at Visual Feedback, the slider keeps going up and down by itself without me pressing any keys
Check if the same thing shows up here: https://analog-monitor.wootility.io
If it does, see if unplugging and replugging the board resolves it.
ive tried unplugging and replugging
Very interesting, which switches are you using?
@opal elk is this the same behavior again? A while back the jitter happened on bottom out with the Raw HEs iirc. Any fix?
Is the board usable?
😭
Maybe with a bit more forgiving RT settings?
im not touching my keyboard at all btw
now my f6 key is doing it too, as well as my A key
i have a eletric standing desk
this module literally just came in the mail a few hours ago
and finished assembling like an hour ago
I have no clue why it happens honestly, it’s pretty interesting that it seems to he happening in intervals, it’s more clearly in intervals after a while.
Do you have Lekkers by any chance?
nope
Could try to install those to see if it helps.
only geon raw 50g
nope
Okay, one more thing: Could you try to take the switch of that key out, and swap it with another key that doesn’t have this issue?
To see if then that key becomes problematic.
Cause if that’s the case, you can just swap the problematic switches out if you have some left over.
Maybe Simon replies tomorrow, he might know something you can try still.
i was supposed to get it thursday, they messed it up so they rescheduled it to Saturday, they messed it up again so they rescheduled it for today
I’d hit support up already though.
i finally get my wooting and set it up, and of course it has issues
I feel you bro
im boutta just give up altogether and just get the NuPhy Air75HE
now my fucking f7 key is being activated with no pressure
trackrecord for that isn’t really better
and its at a 1.0 actuation
it’s just unlucky af
now my comma
Bruh chill let me talk to u
i guess its just my whole keyboard
Did u do anything weird with it?
nope
It’s possessed bro
followed the wooting youtube video for assembly
So don't worry
followed step by step
Might help you in-game 
Just don't touch it and follow this steps
Re plug in your keyboard and don't go in any software and use it for a months
It will fix atoumatcally
wtf
bro what
Just don't touch it use it as normall
LOL
im not trying to wait a month for a brand new product to work properly
It's because it's new
nah thats ridiculoujs
Rainy, ts ain’t normal bri
Nope I had this issues
if yours had it too, then there was something wrong with it 😭
now my fucking comma and f7 are bugging out
because of trouble shooting?
IT IS NOT NORMAL!
yea im not gonna not use the wooting software for a month and hope that fixes my keyboard
its a brand new product, it should be working perfectly rn
If you receive it this, you can get a replacement.
You should get a replacement.*
this is so dumb
U can talk to the support
my luck is atrocious
But i will say it will get ok
Short end of the stick, I’m sorry man.
im sorry but this is just so stupid
Send support a message (they’ll reply after 5 days or so) and wait for Simon’s reply maybe tomorrow.
5 DAYS???
No it will happen with any hall effect keyboards
💀
IT WILL FUCKING NOT. 😭
What keyboard u got that dosent have this?
All of them. 💀
I’m serious, if your board had this (or still has it), message support too.
It isn’t normal and I think it’d be better to get a replacement.
this is just a terrible experience all around
I feel you man
from the delivery process to the actual keyboard
spent $220 on a keyboard, spent extra to have it shipped faster, and then it doesnt work.....
Btw do u see any issue when playing or typing?
yes
This doesn’t happen often at all, so you might need to put everything on green.
random keys are getting pressed while im trying to type
It’s due brother, it has to be. 
ive had a better experience with my shitty $50 keyboard than this $220 wooting already
The board arriving broken.*
That's weird but just call support u can also try to factory reset it
There is another way
tried unplugging and replugging, didnt do anything
Let me share the video
a 0.4 actuation without me pressing any keys is crazy
If your Wooting keyboard starts acting up, don't worry—it doesn't always mean it's broken. Often, the issue can be resolved by simply restoring your keyboard to its default settings.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer ...
Have u tried this?
If it didn't fix with this
Then just call the support
ok, just did this
didnt work
Call the support then
An overview of our policy for the Legal notice
The only way to reach out to support is via https://wooting.io/support
Pick the category and issue you need help with, and we'll guide you through the process.
This is not a number for support
i cant submit a ticket
Alright the support website may be down at the moment 
I'll relay to the team
May just be temporarily down
your luck is something else lmao
he can just send an email tol right?
or reply to his order confirmation
Not too sure how the new system works tbh
@junior portal Reply to your order confirmation.
submitted a ticket
i shouldve just gotten a prebuilt wooting
only got the 80he module instead so I could get a discount on the geon raw switches
Yo, I need help
Where do I go to get some help? I think I fucked up my keyboard.
I tried to look at videos, but it was nothing like how this is and it didn’t work
Try one of these
Glad it's back to working 
Um
The LED turned on, but then I realized the keys still aren’t working
I’m sorry😢😭
Am I cooked?
Pls what do I do
is the 80he still having a low polling rate issue in 8k mode?
You mean the rgb issue causing it to poll low? iirc that was fixed awhile back and it's why tachyon mode locks out certain moving effects now
Oh! Okay awesome im sorry i was browing a random reddit post so i was not up to date. figured i would ask here as yall would known the truth 😄
Thanks man!
@junior portal It seems you aren’t the only one with this issue. There’s a thread on Reddit and I’ve isolated it to a few “pockets” on my keyboard that probably correspond to PCB areas.
Certain keys, when I place a switch on them, start automatically pressing no matter what I do. Took 3 hours plugging in switch by switch and turning the keyboard off/on per switch. I think something’s borked with this batch of modules.
baited by embed
Hey my wooting80he just randomly bricked
I unplugged it from my laptop, Macbook Pro, connected it and now it doesn't pick it up anymore
I can't even see it in the connected USB devices anymore, and the troubleshoot reboot/reconfigure doesn't work
What do I do?
I've done this and as my laptop does not pick up the device anymore it gets blocked on the next step
Then you'll have to reach out to customer support.
Pick the category and issue you need help with, and we'll guide you through the process.
I hope these aren't a common occurrence
Eulogy for my 80he with cool keycaps
Got robbed and it got stolen
Probably wont buy another wooting board i dont got the money for it anymore but i really liked my experience with it
yea in wootility you can just unbind the windows key
You can also toggle it off temporarily...
You can temporarily disable it with fn + win (by default)
or just unset it in wootility
😭😭😭🕊️🕊️🕊️
thank you!
My wooting just arrived in the mail and I put together. Its so goddamn good I cant even describe how much of an improvement this is.
I am still trying to find a decent RGB software for my 80HE. I would love a CS2 integration, I mean that does work on Steelseries GG so why wouldn't it be possible else where. I tried Artemis 2 RGB and while I love how customizable it may be, it truly only worked 10% of the time the way I wanted it too.
I suppose that's the risk of having a dope keyboard
(Sorry that really sucks
)
hey, will the new lekker tikken switches be compatible with the 80he? ive been wanting to get the 80he but might wait a while if they're compatible and buy the 80he module with new switches
Yes
sweet, thank u!
this reminded me that we never figured out what the issue was there, I'll download cs2 and figure out what's going wrong
Should i get the owlabs ti switch or wait for tikken switch, im going for a quieter build so i dont wake my family up while playing chordjacks
lekker tikken prop aren't going to be quiter than owlab. I suggest you get actual silent switches
alr
Soon....
This is the experience I hope for at the end of July
hopefully so. I was so scared I was gonna be left disappointed
Can't be more disappointed than two Razer Blackwidow V4s misaligned switches so every time you time even with 500 polling, it reads 2 or 3 inputs.
that sucks. It would be the funniest thing ever if you got sent a faulty product. Prolly wont happen tho
Hopefully wont happen
yeah i had a nuphy halo65 he, idk whats so different about the 80he but it just felt better
I switched from logitech g pro. The switches on these are like night and day. Also logitech ghub is, what im learning now, not a very great software for any customization
idk about differences between magnetic switches tho
how do i get i has wooting role
wooting's board is just more refined overall. Rather than having to churn out keyboard every quarter for profit, they can take their time refining to the best that they can.
This feels and looks sick man I love it!!!!!!
do we know if they will have 80he version 2?
Hi all, this might be a repeatedly asked question, but should we expect a 80HE v2 any time soon? I am hoping to pull the plug soon
Oh my god that timing hahaha 😆
what do u want for the v2
same i am about to pull the trigger but double check with the team
the 80he just released a year ago and has the highest hardware already
it's just nonsense for wooting to release wooting 80he v2
How do I get to grow up to be like you?
I guess it comes down to understanding what the difference was. I never paid attention to the 60HE
I got it as a present im only 15 xD
Make sure to remember how blessed you are
Thanks bro ;D
i created a support ticket, waiting to hear back
Is it just me, or are the switches really hard to remove
It feels like they are glued in place
they are really hard to remove
i was struggling removing mine tryna figure out what’s wrong w my board
Feels like I’m going to bend the switches plastic trying to remove one
then i found out it wasn’t even the switch
cause after i swapped the switch out, there was still a lot of phantom pressing
yea i was worried too
you just gotta lowkey wiggle it as you’re pulling it up
try to lift the bottom of the switch too while you’re pulling out
that’s what they did in the Wooting youtube video
They are difficult to pull and the included puller is suboptimal
i agree
https://youtu.be/-KtpE1mv23s?si=FKeSn1eJuqjuXfRM i followed this video
Wondering how to swap your Lekker switches inside your Wooting keyboard? Follow along with this tutorial and find out!
Tool kit https://wooting.io/product/blank-switch-toolkit
L45 Lekker Switches https://wooting.io/product/lekker-switch-linear45
L60 Lekker Switches https://wooting.io/product/lekker-switch-linear60
➤ Follow our socials!
...
Yeah
Exactly
I recommend don't do it with stock puller cause u can damage it
I damaged mine in the process it wasn't serious but it's annoying
So it's better to use the method 2 fully open it
If u don't want to u can try to buy other switch puller but i still say don't touch it I had a horrible experience with it
Oh waait, method 2 is not pulling the plate out?
It is
Pulling the plate out is the best way if you're doing a lot of/all of them
You can apply pressure from the back makes it a whole lot easier
But to each their own
Yeah this is the best one I think it dosent worth to change just one switch
Pulling just one of them without opening the plate is horrible
Change all of them by pulling out plate or don't touch it should be a rule for 80 he
pain
Rip
how long does it take Wooting to respond to a technical support ticket?
5 days +/- (mostly +)
no way
i thought Wooting customer support is the best there is
5 days to respond to a ticket is kinda crazy
it’s good but slow
after they respond to your ticket, they will reply faster after that
like within a day
yea they responded to my support ticket within 24 hours regarding shipping when UPS kept messing up my delivery
but i haven’t heard a response yet for my technical ticket
mannnn i just want my keyboard to work 😭😭 couldn’t even use it out of the box
technical tickets require specific support people to help you I believe, so if they're busy could take a bit longer than normal ticket
should i just try returning my keyboard and buying a new one?
i ordered my wooting last sunday, took UPS 3 different attempts to deliver because they kept messing up.
and when i finally get my keyboard, it’s defective
how long has it been since your ticket?
uhh like 30 hours ago
oh that's not outside of normal reply times yet, you're still okay
no need to worry yet
oh okay
i mean i can’t really game or use my pc because my keyboard keeps spamming keys by itself
so i just have to wait for wooting to reply i guess and not use my computer meanwhile
I assume someone in discord has probably shared the 'my keyboard is pressing random keys' video with you to see if any of those is the issue?
yea i already tried all the troubleshooting videos and articles that Wooting has
as well as all the suggestions in this discord
tried a different cable, tried using a different switch, tried resetting, tried restoring
different usb port too I assume?
yep
tried everything except plugging it into another pc
cause i don’t have another pc or laptop
alright, yeah just hold tight. Someone will get to your ticket - you're fully covered by warranty so you'll be taken care of for whatever issue it is
alright, this is all just really unfortunate luck for me i guess
i was really excited to finally use this keyboard
yeah a bit unlucky that the support system was having some issues other day as well which probably gave support a headache
if they end up sending me a new keyboard, will it be another 80HE module or will it be prebuilt
because i only ordered the module version so I could get the geon raw switches at a discount
that would depend on the support case and situation, but usually I'd assume it'd be replacement of module since that's what's going wrong (assuming it is a module issue)
ok sounds good
@junior portal Have you tried resetting your board?
yes
Can confirm 🙂
I usually put my thumb under the space bar. I have noticed the paint on the keyboard (white zinc V2) has changed texture compared to other areas (smoother) however no chips or color difference…
I guess this is expected right? 
A change in texture is possible, yea
All good then, I have noticed the same change on the pbt keycaps I have. The texture went from slightly gritty, to soft matte… if you understand me.
That’s what I called The Wooting Boost
Yeah keycaps will shine over time as your finger oils and stuff wear out the topmost layer of material
Super normal
Supposedly pbt keycaps should not shine right? That’s only for abs no?
I see. So the change in texture makes sense… I guess unless I see a discolouration on the keyboard (or the paint chipping/fading) it should be fine
Yeah
Different teams, different backlogs of tickets.
Technical tickets are the most complex and difficult to answer with a single response, often requiring some troubleshooting.
oh okay
yea they just responded to my ticket 🙂

Hi, does anyone know when the new spacebar will be available for the wooting 80he?
This should fit 80he?
Just worried because I’m using the highest feet 80he offers
too big but ye kinda
somewhat
Even with feet’s included?
feet doesn't really matter, it just covers the key
Oh, won’t the dust go underneath if there’s a small gap regardless?
not unless you live in a desert
This is the best I could find that actually able to deliver to my place unfortunately.
Ideally is cloth or plastic keyboard cover would be a perfect long run? I’ve seen a cloth cover that ranged about 5 dollar more than the plastic one.
Mite change the colours around still but on the hole happy with me metal keycaps
What’s your favorite keycaps for 80he so far?
The what now?
split
We haven't announced any plans for split 80
cool
Would this fit? Although it’s 75% I believe 80he is 80%
80HE is 77.5%
Get a custom one made?
That particular seller doesn’t ship to Hawaii
Oofda.
got a new case for my 80he since the original had begon shedding paint
Is that the bone80?
Is it good?
Yes
It looks and feels great
Wasn’t it planned to update the spacebar in the future batches ?
It was not, that's a feature for the 60HE v2
In what way?
Foam, better lubing I think
Nothing I've heard about.
This is from OhmyOats on Reddit
I don't want screenshots, I want links.
But I can tell this is an old post with a lot of non-timeline specific improvements.
So... soon™ I guess
Oh improving lubing across all the stabilizers, yeah I did remember calder bringing that up
Foam pieces in the spacebar to improve sound profile is a running change and is implemented
No guarantee is made for whether or not any given unit has it, as this change isn't with a new sku and therefore the fulfilment center may fulfill an order with the original spacebar or with a new one
I don’t see what he is talking about with the vibration yes the space bar is loud but on every single KB I have owned it’s always been like that
hey i think they forgot to send the other half of your mouse
@junior portal FYI CS got back to me and confirmed suspicions that the latest batch of modules had issues
aw damn
makes sense then
did they send you a replacement?
got my wooting 80HE finaly
any advices of how to take care of white zink properly?
dont put your keyboard in acid. Dont use it for cooking.
Will try to remember 😂
I just wanna preserve white color as long as possible. My hands quite sweaty sometimes
been having the keyboard for about 4 months now. Just use it as normal
Maybe clean the dust every now and then
will do, thank you for assistance.
Kind of tech question: is there any way to check pooling rate on linux properly?
https://github.com/mat1jaczyyy/Keyboard-Inspector the Discord is linked there too, you can join that if you have questions about it.
That's calder
Wernt sure about it at first but you don't even notice parm covers it all
maybe also 80he with tikken as prebuilt would be nice
80he+
tikkens, fr4 plate, pet sheet
Does some people still has the issue of like keybaord random type it self
I had it do it yesterday but I’ve had it happen on a few boards
hot take but I think the 80he+ should be the first wooting keyboard with TMR switches. (either that or the 80he+ should be the first wooting keyboard to have any changes that impact gaming in a positive way
as the 80he was marketed for ultra low-latency for competitive gamers
it's either that or wooting would finally make a Wooting Three that has TMR switches
why r people eager with tmr?
Because it theoretically gets us ready for a wireless wooting keyboard
TMR is like Hall Effect except slightly better whilst being more power efficient
and Calder already talked about tmr in past livestream
and he talked about pros & cons about tmr already
and from his words, i can underline that wooting isn't going near tmr for now
That's probably because it really isn't cost affective for them
TMR's harder to come by atm
It kind of doesn’t though. The power gains don’t work out because you end up needing to have to use tons of power keeping the sensors active
i will never want a wireless keyboard 
We have power efficiency modes for a reason.
That’s not what I’m talking about
1-2 years and the battery becomes floppy,
u expect for 4 years warranty?
I’m talking about the way tmr works for the usage we want in HE keyboards end up using a ton of power
I'm saying there's something you can probably make up to fix said issue
and it will end up the same or even more as HE iirc
It’s not an issue, it’s just literally how tmr works
I feel like every conversation about tmr just ends up with people not reading into how it actually works and a lot of assumptions based on general tmr info
I could easily make a comparison here, but I won't.
Tmr is passive by default but you end up not using it passively in the usage we’re talking about
Which ends up using tons of power so you lose the power efficiency part
People just read and think “oh tmr is passive means it’ll automatically be more power efficient” without actually looking into how it’s used when implemented into keyboards
Dynamic polling rates, sensor sleep thresholds, and microcontroller sleep modes.
I generally don't think anyone buying a wireless keyboard is playing at full throttle
for a fall back you allow them to use the TMR switches at full throttle when plugged in
You can go watch the last talk Calder said about tmr but the tldr is it’s not really something that makes a ton of sense. Not saying wooting will never do tmr just that right now there’s not much advantage to it
wooting wants the lowest latency as possible but with the best stability in the market.
TMR will have the same or even more power usage than HE sensors to fulfill wooting's needs for now
I said that
it's not cost affective in my eyes, TMR has very little gains, a bit hard to get your hands on, etc
It’s not just about cost.
BUT I don't see a new 80he coming out without it being TMR
It’s about the fact it just doesn’t bring gains and possibly has other issues like drift
Hall Effects actually get affected worse by what you're talking about
It’s more of a sidegrade with a ton of asterisks
bro is talking about 80he v2 when the 80he just released a year ago 
they made the knob for the 80he what would the 80he+ have
they can sell that little layer separately
tikken switches I'd be surprised if they don't sell that separately
the reason for 80he+ that i said earlier was to reduce the sku for the switches.
They don't need to continue the lekker's v2 and just continue with the tikkens.
Maybe also change the plate material to fr4 as a side upgrade from the PC plate.
only upgrade an 80he+ could possibly bring is 8khz polling at full brightness with the RGB effects with MAYBE an extra row making it a tkl layout
not everything means better tech and such, because everything is topped off and the hardware is capable enough for future updates
I feel like there's a few things that should be changed for it to be considered a "better" variant
but still, I can be wrong or didn't think about some of the other cons if that happens
No keyboard is perfect there’s still things that can be done to improve even the 80he hardware in lots of ways. That said 80he is still quite young and it’s pretty early to be discussing next 80he
I feel like wooting wouldn't stop lekker v2 production simply because there would be people who prefer the lekker v2 over the tikken
I got the lekker v2 45's and I honestly see no need to switch them out until wooting makes a silent switch
imo, people who buy the lekker v2 are for cost budgeting
I did not like the jade's
omfg
and I'm 100% not cost budgeting because i got the zinc alloy case
ur taste is not for everyone
Even got metal keycaps
good for you and please look at my message properly, it was only a joke about 80he+
and you're taking it seriously as your life depends on it
idk how you expect me to get a joke over a message

u can't see the laughing emote?
the one you JUST sent

odd