#🌟│wooting80he
1 messages · Page 325 of 1
ie the fbi on you gang u better start running
My orders have been getting canceled since November last year and I have no clue how to fix it. It’s not my payment methods as I have contacted them and it’s not on the banks side it seems to be company or site related. I’m starting to think I’m blacklisted from purchasing or they have no stock to sell idk. Just want an 80he lmao
It might be related to your address
Try having a family member/friend order that does not share address or payment method
not in socal, but how much are you selling for?
Either your side monitor is too high or your main monitor is too low
Wdym
I can clearly see how you tilted the monitor up towards your face
Your main needs to be higher
i am a valorant player i like that its so low
Those things are not related
A valorant player still deserves to have an ergonomic monitor height and setup
Generally it‘s advised that you have it on your eye height so you dont need to lean down to look at it
You can still get really up close like a cs player would or whatever but as a rule of thumb its beat to have it on eye height for a number of ergonomic reasons
hm okay
was it even good that i bought zinc alloy wooting 80he? 100 dollars more than the regular one
It‘s the premium option
Doesnt give more performance but if you want something real nice it‘s good
I didnt get it and bought a third party metal case instead at the end
0.15 rapid trigger
Whats your actuation point
Hmmm
I went from bronze 4 all the way to bronze 3 when i got the keyboard
i went actually to silver 2 to gold
i mean
its good but tenz said its a massive boost and i dont see it 😭
I think it also depends on your skill level
And how much you can take advantage from it
i even bought a glasspad
i thought i am going to be the next Radiant player
but at the end keyboard and glasspad and my mouse wont give me boost
i mean i am good in valorant just my gamesens is dumb
i even got a 240hz aoc monitor
wont give me any boost
my next will be 360-540hu
hz
What ranka re you
Rn Gold 1 peak gold 2
Active or since when i started?
started
o
sheesh
yup
Honestly for all this money you spent you probably could have hired a coach for a few hours and you would have gained much more from that
u will get up there eventually
i will coach u bro
You will never know what to improve on if you “do it yourself” it’s gonna be much harder
i come back and hit asc everytime
i just need my prime vandal in shop 😭
i have forsaken
Same
its my fav one
Rgx is good
hop on osu channel rq
u have many i have the champions 2021 vandal
He also played a ton of other games before and i am pretty sure he did use coaches at some point 
Buy me a skin @full bluff 🙏
i am not rich
800
wait let me see again
frost was such a good choice... IT SPARKLES
ye iam around like 400 dpi 0.54-0.58
why 400?
idk ive been using it since ive started gaming
sheesh
You got an extra europe account?
na why?
yes
Maybe get duo and u will climb rank
i duoed
😢
You should try SOCD
wats socd
snappy tappy
best crosshair 1-4-2-0
this?
i am grandpa rn
cya
u just dunno how to use it
-coming from some silver player who played once in a blue moon
Damn got my wooting 80HE within 2 days
is zinc alloy worth it
Thats nothing, iam on 550 DPI on 0.28 Sens
Only you can answer that. It doesn't make any difference performance wise. It is purely an aesthetic difference.
😡

Good morning everyone
i thought they look the same but one is just different material
I ordered this case and is amazing!
What do you think about it?
i didnt get a email yet back from the support because i returned my package but my package is arrived at you guys what is with my money because i wanna order a other thing
With refunds you should wait max 14Days
Just because a package has been returned, doesn't mean someone's processed it. Please be patient for a few days 🙂
can i get like a copoun on the website so i can buy now the other keyboard?
And of course - Reach out to support once you've made the return, if you haven't already.
What happens with your keyboard?
i did 3 days ago
i ordered the wrong one i need german iso and i ordered us ansi
Bro is much better for gaming the ANSI, I have already 2 keyboards ISO and I hate it , specially the button of “shift” , is tooo small
yea but its different like enter u know
Sure
i like iso more
is it possible to get at your website like a copoun so i can order the other keyboard when its proceed
You already asked, and I already told you no 😄
oh i dont saw it sorry
arrived today!! so happy with it
Nice!
had to bring over my old escape key as a tribute
Save up for gt80 
oatmeal and peanut butter
I was a lot scary before buying , specially the “RAW” version
Don’t worry , we gonna make extra hours every weekend for buying it 🤣
Exactly!! Look here
I wanna receive from giveaway an extra Wooting , my dream ❤️
Is very difficult to win
My beloved
ill get this once i save
rn i have the ghost, however ive never switched a keyboard casing before
Which color do you have of USBC? @fallen epoch
i might just save for the zinc alloy. more premium than plastic and last longer
the stock black cable
power
Does any of you guys know a good dust cover for the 80HE?
I think customs lost mine 
Thank you!!!
When did you order yours and what country to out of curiosity? @clear matrix
ordered it 6 days ago, from the uk so just next door basically
what does the dpd tracking say
im assuming youve already contacted wooting
Yeah they just said to wait and see
id hate this
personally im cancelling and ordering again 😭
Can’t cancel cus it’s already left
I would just wait tbh
Yeah exactly
i dont think it should be too much longer from here on out, i know some americans who have been waiting months lmao
It’s better to wait
@lapis dew how fast did yours come
Yeah my issue is that I’m moving house next week
Seems dpd won’t allow a change of address
well i paid extra for faster shipping
but like 4 or 5 days?
Yeah I think mines just got lost in customs it would seem
I purchased 2/28, i received it 03/03
but i'm also US
and the extra for shipping for me was $8 so it was reasonable
@clear matrix
Yeh I think the quicker delivery was like an extra £20 or smth
yeah i wasnt doing all that
my new keycaps just came tho
why no 80he
i dont like 80%s and I use the extra keybinds for all the times I get into those video game troubles
i use numpad more often than not nowadays
all the times I get into those video game troubles
aka minecraft binds 😭
well i wasnt trying to use those words in here
i do highkey fw a numpad
Do you still have your dpd tracker? @clear matrix
i think so, i can check
Ah that’s all
theres the whole website with all the information on it but thats all changed now since ive recieved the parcel
also is this worth it?
My new Wooting 80HE. First hall effect keyboard. I love this thing. So glad I finally got one. Thinking about buying the raw zinc alloy case. Like that raw metal look. The wrist rest is from Wooting too.
fire, love the purple theme.
It's actually white. For some reason the camera makes it look purple. The lights in the PC are white as well. Looks good either way, I guess.
Is 80 switches enough? I thought the 80HE have 83 or 84 switches.
Nice. My desk gets cluttered too. I try my best to keep it as clean and clear as possible.
Any keys that I wont use will be lekker v2
Pack of 90 is what you should get.
You need between 84 and 87 depending on layout.
i clean this goddamn thing everyday
I hear ya. It's an ongoing battle
My man, crack they mango monster asap
lowkey I might have to get a mango monster today after seeing that
just cracked it 🤣
heavenly nectar i like to call it
easily top 3 monsters
all day baby
damn thats crazy fast shipping, what state r u in if u dont mind me asking, i just placed an order last night with express shipping
I am in upstate New York. It shipped from the Chicago warehouse or shipping hub
oh cool im 3hrs from chicago i hope i get mine fast too lol
9 weeks waiting time otw
2nd behind bad apple
1st for me easily
had one vending maching right outside my house sell it before it got removed
no lol
you get a free plastic dust cover with your wooting if you care that much about it
yeah but this one looks cool ^_^
I thought I Wanted a dust cover but until I realized I'm too lazy to cover it
even with the free included one
id probably be the same im ngl
Except for Zinc 80HE's*
why no cover for the zinc
WHAT zinc does have FREE dust cover?
Because you get a travel case instead.
ace.

Riots ensue
are you suggesting wooting users should pack up their keyboards every night
🤣
I'm suggesting that the "dust cover" isn't needed on Zinc models, cause it's there to protect against shipping damage, and the travel case is far more competent at this.
Was zinc even worth it is it that better or did i just wasted 100 euros
most custom keyboards come in travel bags to protect during shipping
Only you can answer that question. It doesn't make the keyboard better. It's an aesthetic choice.
i was gonna get the zinc one but the ghost one was limited edition so i wanted in on that
I heard zinc sounds like shit everyone complains about it
except some which come in metal cases
how long is it limited edition for
Until we choose to make something else, at which point we'll folks a heads up.
im sure they will be fine without your purchase :D
Over 330 Is just bullshit for a keyboard just money waste
I bought a basic wooting plastic, it's pretty awesome
To each their own.
depends if you got money like that or not Lol... 200 / 300 is nothing for some of us
I bought all the wooting keyboard they are best ones i tested so far but when they release a over 400 one not buying it
dont bully people being fiscally responsible
dont come to wooting and expect budget, you get what you pay for
Nobody would pay 400 for a keyboard
rip
you know... Let people do whatever they want with their money?
Idk if 330 is worth this keyboard
It doesnt sound the best u pay only for the features ond low latency
its all personal preference
Why would you even comment on what people would or want to do with their own hard earned money? If you dont like it good for you, have a good day and go away
Offering details This is the limited first public offering of the Seneca. Each unit will include a special First Edition nameplate with serial number. The components of each Seneca are machined and molded to order in small batches as part of fixed offering batch such as this one. Each board is then individually assembl
have to say, people do
i just know this sounds like heaven
Ugliest keyboard i ever saw
It sounds like you don't want one, but you know they've been on backorder for like a year now, right? Meaning folks have been buying them.
one day he will realise aesthetics arent objective
Fact is most times u only pay for the brand
i mean, wooting is a good brand and i dont mind that i spent a bit extra for a well known brand with good support
like??? obviously brand plays a factor
i do pay extra for designers or vendor i like for sure
wooting has so many loyal customers for a reason lmao
but custom keyboards' margins are quite low
some people pay extra just because they like the heavy weight of the keyboard
Or to use it as a personal defence item in case of home invasion
or just because they can
one of the main selling points for me on this keyboard was literally because of its form factor, and i know theres 100000000x more out there but i just went with the one that was deemed the best and aligned the most with what i wanted
facts.
my 80he has dealt with many thiefs...
got a keycap for each kill
Like imagine coming to a place where people spends more on keycaps than on the keyboard... to complain about something too expensive
💀 terrible example
Let the people spend their money however they want
but yea
he dont realise people here GOT MONEY
just know that the margins on most companies for kb and its accesories are quite low
How much and remind me of your address? ||/s||
pure gaming companies i cant say like razer or logitech
come over
5 years ago spending 300€ on a keyboard was something beyond my imagination... now its okayish...
So yeah, that guy came here with the wrong take imo... he could have worded it on something like "personally I wouldnt spend it...blablabla"
yeah for sure
ngl from the context i read he did
I gotta start using that, “heavenly nectar” is actually the best description. I drink Red Bull again but I’ll switch back to monster next year
For people who’ve had a 60HE and upgraded to a 80HE, what do yall do with the 60HE?
put it on a display
it literally is like the nectar but dropped off the sun
sell
It’s the best energy drink I’ve had, I stopped drinking em back in college when I was addicted to them
True gonna see if my friend wants it
lmaooo im in uni rn and i may be going through what you did
Yeah it’s definitely nice to stop it for awhile and return to it
Brings out the caffeine energy boost again
is there any video or explanation why wooting decided to do their own tkl design?
without the 3 extra buttons
no, they just chose better layout

ok
1 2 3
I just dont find it good looking compared to the traditional tkl design ig
Can't ban, which is more efficient.
wooting just came in
it's just stock now and it sounds awesome, but I have work so I'll play it when I get home

my mom is excited to not have to listen to me play osu on the old keyboard
was twice as loud
question, am i suppose to lube up the stabalizers?
Personal preference if you want to relube things.
they come lubed?
All of our keyboards (and switches) are prelubed.
okie ty. are they hard to do? 1st timer
would rather do it right the 1st time or nothing at all l0l
Are you awake 24/7
There are 2-3 people that control the Mansen account. They take shifts.
Actually?
Only Mansen(s) know for sure
I’ll have to contact wooting support
Hey, one of my friend is trying to order from the UK and when he puts a random post code he gets 166 pounds total and when he puts his he gets 196 for some reason. What would be the reason of such a price increase?
Good ole sales taxes.
thanks for the fast answer
Even the screenshot says including taxes on it
hey is it normal that my 80he is a bit warm near the usb c port? i dont think its concerning but it feels a little warm, i just got it today btw
Why are you feeling up your usb-c port 💀
I'm sure it's okay 😅
Also I think comment was deleted. Everything is preference yk
Plastic, zinc, switch, keycap, whatever. All preference
was just picking up my keyboard tbh
Hmmm, I trust you
Yes, its normal
Also bottom of the keyboard can get warm, because of LEDs
If I were to order custom key caps would I just order cherry profile?
Any keycap profile should be fine
where do yall get keycaps from
Internet
amazon
does anyone know any aftermarket 80he cases coming out in the future
Anyone know if having an order being stuck on pre production for like 18 hours within order placed is normal? Is there like any other emails I should be getting about shipping or delivery updates after purchasing? So far all I got was a confirmation email saying it was placed and should be delivered in early may.
Very normal
If your order is a pre/backorder
The boards are not made on demand, they are made in batches
Okay good to know thank you
I just got my 80HE for Christmas in December and decided it was time for a little spring cleaning tune up. I removed some of the keys around WASD / 1234 / Tab, Shift, Ctrl, etc as there was noticeable gunk building up from constantly using these keys while gaming.
I've cleaning the base of the case using a q-tip and a electronics (screen) cleaner and giving the key caps a proper wipe using the same cleaner and micro-fiber cloth.
Is this the proper way to clean and maintain? and would anyone suggest re-lubbing my keys or would that not be necessary yet?
Keycaps you can take off, put in a bucket with lukewarm (never hot!!!) water with some dish soap
Just make sure they are properly dry before reinstalling them
does anybody know if its possible to make the gamepad mode activate when i switch modes/profiles on my keyboard or do i always have to manually enable it in the wootility?
As for other maintenance, just a dry cloth or microfiber
i highly suggest also using compressed air or an electric air compressor to blow out any dust/hair out of the keyboard. I have cats so hair is everywhere so it's the fastest way to clean out surface-level gunk
Manually - Cause it requires the keyboard to reconnect.
As for re lubing, only needed if you feel like your things are really scratchy
But that that point might as well get better switches than lekker v2
Thanks for all the pro tips guys! Really insightful and helpful!
They feel fine for now. It was more so seeing visible piles of gunk and clumps of dog hair shine through the LED between my keys that got me motivated enough to want to remove some keys and start cleaning hahaha
Yeah just clean your keycaps regularly and while you‘re at it you can clean the plate and surface of switches
Is it possible for this to be a feature in the future, switching keyboard and gamepad modes between profiles? Would be really handy
Not impossible - But it would be really slow and cause potential issues if you alt tab a lot.
Cause the keyboard HAS to reconnect, whether or not it changes the analog for you on the fly or not.
thats understandable, thanks for the answer!
This is the month. Finally White Zinc V2 !!!111

Why would it not include it in the first one tho? the only thing that changed is the postal code
Because thats how shopify works
They only add taxes once a real address has been input
Brexit.
Oh yeah I forgot about that part
Yeah I cried when ordering the 80HE cause of the price jump
Been shipped and arrives soon though.
Wooting never increases prices
taxes do.
Not true.
https://wooting.io/post/why-we-have-to-increase-our-euro-price
We've done so before as needed, and will continue to do so. The US tariffs are an example of a current day relevant example that could force us to change pricing in the US.
Oh forgot about it

Rip US pepo
At least there's a lot of cheaper HE board now... that'll also get the 1.2x increase prop
If I bought a wooting80 Pre-built with lekker switches (Oct 2024 batch) in the standard plastic default case, is it hot swappable?
All of our keyboards are hot swappable.
Oh okay thanks good to know. I guesss I was watching a very old "cleaning your keyboarding" video tutorial on the wooting YT channel and it mentioned to make sure your keyboard is hot swappable before taking switches out for deep cleaning. Thanks so much once again!
can i type on wooting 80he keyboard
Whaddya... whaddya mean?
ion een know fam
can it make text when i type on it
good
abril phools

Bro what do you do for living?
I am... Customer Support for Wooting? 😄
lol
And… how can I became like customer for Wooting?
I’m asking beacuse I want to have time like you to be online all day 😅
I have a question about my keycaps, since they’re pbt double shot, I can just wash them warm water and soap? My old keycaps scratched off the color but this shouldn’t happen with these right?
Multi monitor life. I have customer tickets open on one, Discord and other social media on the other. I'm not staring at Discord 24/7. I just check in often.
Keep the water lukewarm, scrub them as needed with a soft toothbrush.
Dry on a towel somewhere warm and dry (not on top of a radiator or other active heat source)
Tyvm 
Im also scared to open up my keyboard for a deep cleaning, I don’t need it yet but in the future maybe
Just wrap it in cling film and never worry again 😎
Do you get paid
-_-
How to i get regista on wooting account
Wooting hub
Hey Folks, I currently have a 60HE in the Optimum aluminum Case, and I've been considering trying out the 80HE.
Anyone have thoughts to share on the Wooting Zinc case in comparison to other premium case options?
I only have the 80HE in black zinc, since September 2024, served me well for the most part
I dont have any experience with the Raw Zinc or White Zinc v1 cases, or after market ones, but I am waiting for the Holy80 to be a thing
@pallid zealot
Why you delete a message about “enter” @buoyant solstice 🧐
I was more quicker than you
No thank you , I had 2 keyboards ISO..
My fiend told me if you wanna make something custom , is better you choose Zinc case than Plastic
@valid comet
How often should I need to change the lubricants on the keyboard? @buoyant solstice
I made both ANSI and ISO FR 80HE kbs
ISO FR for a friend I will see in about 2 months for the first time
ANSI for myself
Yeah that's fair, I've debated the Holy60 quite a bit.
@buoyant solstice hi, is it advisable to use leaf spring mount for wooting 60he/ 80he.

<@&490097707487330305> does wooting PCBs support/ are stable with leaf spring mount?
Bold move Cotton
Just say no, a dude is saying it does. And I just want to hear from the makers that is does or it doesn't 😅
Ping WootHelp for help with moderation next time
Man I’m so excited for me 80 to get here.. how long did it take yall to get used to not having a full sized keyboard? I’ve been a razor fanboy for as long as I can remember and always used huntsman’s.
That’s actually fire
I went from full size down to a 60 and now going back up to an 80.
Living without a numpad was jarring at first but I've gotten used to it.
Issue with a 60% is that I just can't get used to not having function / arrow keys, it's affecting my productivity.
80% is the sweet spot for me imo
Switched a long time ago and never looked back lmao
60% has too few keys and 80% has the perfect layout
80% is great but i am gonna miss the extra binds i can set with a full size icl
Binds for what?
also ngl a full size is taking up too much mouse space icl
all sorts of stuff
videogames, editing, photoshopping etc etc
If you are a creator fine, but video games is doable. I can handle 4 full rows in WoW with my 80%
Agree
So this might be a basic question, but is Cherry MX keycaps compatible with Geon Raw switches?
Not the switch is important, but the layout of the keyboard itself
Geon Raws have MX compatible stems, yes.
Using HE80 Nordic layout - Zinc version
they are compatible
Yea I couldn’t do a 60 for that reason.
Everyone's different but as a not-just gamer, the extra keys deffo help. Wooting cooked with the 80%
Hi all, I just bought the 80HE, and I am new in the modding. I would like to buy the case gt-80 for Europe, do you have any European website to share please? Or the only choice is to buy KBDfans website? Same question for the Gateron Magnetic Jade Pro. Thanks in advance for your help 🙂
https://www.alexotos.com/keyboard-vendor-list/ for switches. For the gt-80 my guess is it's only available through KBDFans and users reselling them
Gt80 only directly from KBD, jade's from max gaming
Thank you!
Thank you!
You're welcome!
80HE white zinc when , im tired of waiting =[
Someone knows if 80he have spanish versión?
We have Spanish ABS keycaps.
80he pcr or zinc
ISO keyboards don't have keycaps preinstalled.
Okeyy
i hope that wooting doesn't play an april fools prank on me and doesn't deliver my 80he
🪫
i just switched from wooting 60he to 80he. i feel like switches on 80he are much havier even tho they have the same spring weight? Does anyone have same experience as me?
I'll be able to tell you when mine arrives
Could be due to difference in lube, or the tolerance difference between v1 and v2
Or it's just placebo and they are the same
Nah theyre not the same
I have two keyboards at the moment
But that might be lube difference
spring weight is the same
I ordered the pcr version of the 80he do you guys reckon I should buy the zinc alloy case separately too if I feel like getting it
What to do about my 80HE? 
I preordered my 80HE back in March ‘24 and finally got it around mid October. fast forwards about ~5 months and today I noticed what I thought was some debris on my keyboard.
I grabbed a napkin to just wipe it off but realized it was still there so I very lightly dampened it with a spritz of water and tried wiping it again (this time with a little more pressure incase it was stuck on there)
When I pulled the napkin away I was confused as now what I thought was a dirt spec got bigger. Upon closer inspection it looks like the Zinc Alloy material chipped or got worn away somehow? I didn’t even think this was possible (I chose the zinc alloy over the PCT because I figured it would just be more durable like a solid chunk of metal)
My question now is what do I do? I know it doesn’t impact the functionality of my keyboard, but it just hurts every time I look at it now. Is this something that can get replaced by warranty? I’m just kind of lost 
I actually thought about spraying it or using some type of paint/nail polish or similar, but since I'm not familar with Zinc -- I'm not sure if it would just chip off again or make it worse 
I'm not an expert but the paint is probably added via EPD (electrolysis)
So it's probably not the best idea, I'm just memeing.
"What Does Warranty Cover?
The product warranty covers defects in workmanship and materials during normal use."
It should be covered.
All good, I wasn't taking it too seriously. Like I said I'm not too familiar with Zinc Alloy, but I just took it as the better option over the ABS plastic. I didn't know if it was anodized or if it just had a coating
I figured I'd just post here incase anyone encountered a similar problem.
You have 4 years of warranty on the product, 2 years for LED
I definitely suggest using the wizard
I'm really sorry that happened to you and I hope it gets resolved soon 
Thanks for the quick response 
I'm not support but I saw the message and I figured I would try to help out
Is anyone using the GT-80 case? If so, what wrist wrest are you using? The default wooting one is slightly thicker than the case
not fully matching but good enough
Can someone release my order from hold
i still use my wooting one 80 keys
see the second generatio ncame out
any difference?
my wooting one works for like almost 6 years only 2 keys had double click problem
Are we getting a smaller time window this week, when the keyboard will be delivered, due to the batch arrival today?
Here? No. You'll have to raise a support ticket on the website and wait.
Wooting 80he white zinc V2 
Hi,
When I type with a PCR case, the desk vibrates quite loudly, but will this be reduced if I use Zinc Alloy?
I'm of course considering other solutions, but I'd like to know which is better based solely on the difference in the case.
Vibrates?
What feet are you using? Is it a very loose desk in general? Does it wobble if you knock on it with your hands?
Desk mat ?
It's a typical wooden table.
My translation may have been a bit misleading.
Rather than the desk vibrating a lot, the keyboard makes a loud thumping noise when typing more than other keyboards, so I'd like to know how it goes with the Zinc Alloy.
Simply written, which transmits vibration, PCR or Zinc Alloy?
Having a metal case will definitely make more noise.
A deskmat would help with the noise is what he is saying
to clean my keyboard i take off all caps and then brush the dirt off the keyboard or take a little dustblower and then i take warm water with soap and let the caps in that for like 10 minutes and then wash them off with cold water and let them dry
Thank you to everyone who answered and gave advice.
Should I lube the switches myself or is the prelube enough?
Up to you.
The 80HE is available in white zinc alloy as a prebuilt, but what about buying the case seperately?
Just checked the store
Guys, I need some help, does the 80he work with the coiled cable that wooting sells with 8khz polling and same latency as the stock cable?
Yes. The product page even says as much.
thanks was just worried that latencys will get messed up an such, awesome, I bought the 80he yesterday with the coiled cable as a preorder, looking forward to it!!
Neither available. Slight store error showing it available prematurely. 🙂
White zinc never existed
what is a "White Zinc" ?
"prematurely" so you confirm that the white zync will be released very incredibly soon. Thank you for leaking mansen
It's not like the most recent post in #📦│batch_updates makes that abundantly clear, nope definitely Mansen leaking thinks 

Hey guys, I just ordered the Wooting 80he, Owlab Ti switches, pbfans key caps.
I wondering how I determine the best stabs for my build. What am I looking for? How do I determine the stab length I need? etc etc
brand of stab doesnt matter
just some is easier to lube than others
They're asking about stabs though, not switches.
but if ur buying 3rd party anyways
1.6mm, long pole
(knights v2/3) is easy to lube, abt 20 bucks
stock stabs are fine
Thank you, that is helpful, but how do I determine this myself? I just want to understand the process of knowing which ones for each build, this will likely not be my only build. Generally money is not an issue, just looking to understand how and why I would replace them
if its even
and it doesnt make an unusual sound
u can ofc just record it and ask
if ur unsure whats the issue or its hard to describe
Finally got the rest of my parts, build done 🤓
I’ve crafted my ig reels brick by brick
You use a wooting keyboard for your laptop?
Na I was doing the mods on my dining table so the laptop was just to test it out rq
so i fixed the jst cable 3 times now and after a couple of days it always starts disconnecting again, am i doing something wrong? how can i keep the jst cable tied down enough so it doesnt move again?
its probably not plugged in properly
push it with your nail
yea thats exactly the problem but everytime i push it in with my nail as hard as i can without damaging it
and still after a couple days of use it starts disconnecting again
its insanely annoying, it even just disconnected now as im typing this
It‘s generally how easy they are to tune and how much maintenance they need
Premium stabs are easy to tune or dont need any at all
They also have tighter tolerances etc
can someone recommend me transparent keycaps which fit to the ghost plastic case?
If you get transparent keycaps your oily prints will show up

out of stock
also there is no picture how it looks when the led is off and the windows button looks terrible
Love to see batch updates
I thought it looked pretty cool, aside from the cringe ass 'ascend' enter key
what about the steelseries keycaps?
Clean ass combo
Ascended 
You can order them in Germany too.
i know
thought this was gonna be for my own build 😔
(but i agree)
ASCEND INTO GAMING!!
What mouse are u Using there
It's an Endgame Gear XM2w 4k (but it's not my setup)
Hello, does anyone else have a problem with their 80he, where when they bang on their desk, the vibration causes some keys to press themselves somtimes
My actuation point is at minimum, but is there something I can do to the keyboard to make it more stable to prevent this?
I'd avoid banging the desk personally
I just said "banging the desk" because it was easier to explain then "I sim race on the same desk that my keyboard sits on and causes vibrations that spam keys"
maybe setup a profile so that when you're racing the actuation point is lower and requires a little more pressing to activate
Yea you're probably right, I just don't like having too many profiles, already at 4
Is your desk magnetic, or do you have your actuation point set very low?
actuation point very low
Then yeah, maybe raise it, use a diff profile, or go easy on the desk banging 😉
Fair enough, ty
hey yall, does the keyboard have Protection Mode like steelseries?
I dont think wooting board need protection
Wtf is protection mode
Well all wooting keyboards are female

No need
missclicks
No need
no need
This is not currently a feature. If it's something that is important to you, I recommend to make a post in #1141096226884956181 to request it
i'm good, i was wondering cuz i tried a steelseries kb and noticed they have that sort of thing. Would be useful for some people who doesn't want to keep switching profiles before gaming tho
Anyone play osu mania with the 80he?
I’m upgrading from a 8 year old razer black widow 2016 edition so I’m wondering what settings I should run for my 80he when it arrives
i don't play osu but probably this
NOO
Gimme a moment, I also play mania. Gonna give you my profile setting
what even is mania
Thank you lol
lmao i got no idea
It’s a VSRG on osu (like ddr and guitar hero)
ah nvm then
nvm this
34a8904d6cbcb3edd9eb845706dfdcee672e TLDR: This comes with an assumption that you constantly bottom out every press. Modtap is used on windows key to prevent accidental press on that.
Capslock also disabled
Thank you I will keep this in mind lol
I recommend you to read the documentation/website more
Maybe my slow ass fingers can make it to 4 digit
Ehh, this profile is not for speed, it's for accuracy and comfort.
It’s ok I’ll use it for LN
it will be wayyyy more sensitive than my old ass keyboard anyways lol
Yeh, just note still, this profile always assume you bottom out every press since the actuation point is at like 3.5mm.
but do help in jack/if you want to press a note again instantly
Don't use Rappy Snappy on osu, contrary to @hexed rover suggestion. It is not permitted based on their game rules.
lol yeah I’m pretty sure he just didn’t know
Rapid trigger is okay with osu, Rappy Snappy, Snap Tap, and DKS are not.
Thanks for the heads up though
thanks, i had no idea
anyone else receive their 80he and it just didnt work?
Don't make me worried
i could just be unlucky but i got it this morning and it wont power on lol idk
I'll know tomorrow when mine arrives
i wish you luck
My guess would be that the JST cable came loose in your board. If you feel comfortable with opening it you could check on it and reseat it.
ill take a look thanks!
hi, anyone else get a usb disconnect sound whenever they start a game?
I have a question about the actuation point for HE80. It stuck at 0.11 sometime 0.13 at visual feedback. Is this normal or just visual bug on wootility? My 60HE is working fine
it aint visual
https://analog-monitor.wootility.io/ u could use this to check which keys is acting up
I encounter this issue quite often since I got the 80HE. Upon checking each keystroke, it always end up at 0.11 actuation point. Changing cable and reconnecting doesn't fix the issue,it just go away after reopen Wootility multiple times. No idea what trigger it or how to recreate this bug.

replug
oh nvm
is it a particular key doing this?
didnt work with replug, but reopen wootility multiple times and hope it go back to normal
all keys does this not any particular one
that's very odd then, are there any mods to your 80he?
it happened out of the box couple times. then I tried with 60HE which is working fine.
could be a usb power issue, you should open a thread in community support
like for example my 80he has issues on one of my computers because it has stable power issues due to my computer psu being a bit old and overtaxed at times
if you haven't tried yet, turn down polling to 1k and see if anything changes there. Its a bit odd that it keeps ending at 0.11 for you though - could be other things happening

How do I swap active profiles without going to wootility
thneres hotkeys
the fn 1 p and ]
and you can also change it
Factory does roomroomroom too diit dooot, oh no there was a Brrrr we gotta remake this.
Worker checks everything was good then goes Woooot
Plane with keyboards go like droooooooo
Plane lands like pshhhhh
Warehouse workers do trotrortortro and gives keyboards to parcel carries
Carrier goes like broombroommmm and gives you the package.
In every step of something goes even mildly wrong, everything is affected. So yeah just wait
It’s just workers doing their job making sure we get it in time 😊
Still in shock we are getting it this month, it’s been a long anticipated wait..
Alas
Does this not explain it to you? What's left unanswered? 
#📦│batch_updates message
Is info about cherry keycaps?

🤔
I have literally no idea what you're talking about my dude...
See
The keycaps are pre-order
Okay? First of all what does that have to do with the V2 White Zinc case update (which is what you replied to, pinging me)
Second... Yes that sure is an order. What is your question - when the keycaps are restocked for your order? See the hub shipping estimate

that was 100% the issue you are a life saver omg

Where is the hub shipping estimate
Access and edit your orders, connect your discord, and manage your Wooting account.
Do you guys use the silicone feet extensions? What do you think about keyboard angle?
Yes. I use the 6 degree ones along with the wristrest.
Love it! 10 degree angle is perfect for me
Do you know any studies on how typing angle affects performance?
seems like a topic that would have research on it
no performance impact, just ergonomics
as a general rule of thumb, lower angle is better
as long as you can still hit the keys
what is problme
he is sad like this in my plug
in i dow unplugging and replugging
and he not start
can you stop ghost pinging
Hello. Play valorant open socd Which is best?
I didn't understand
(Or ping staff for anything other than MODERATION)
if you need help with your keyboard thats fine but there are better ways to go about it
loke also is not conect
What browser is this?
chrome
And you're following the steps? Unplugging, holding down keys?
me 60he
Same question.
I disconnect the wire and press the button. ؟
You were told to stop doing the ghost pings. I hope a brief timeout will get the point across.
Wooting Restore It is not available. What is the solution?
soory
i gate probleme i send tow
What is the solution?
wooting 60
Are you SURE you have a Wooting keyboard?
yes why
Because your PC says you have a knockoff 60HE plugged in. Which obviously won't work with our software.
First time modding my keyboard and wondering which magnetic switches have the most stability and THOCC
stability, ttc kom poms
but u have to hand lube them to sound decent
Thank you 🙂
no worries lmao, thanks for the player povs 
Bro got one of these
Glad to meet a fellow OW enthusiast in here
Wouldn't be the first time this happens 
Im almost certain it doesnt have 8000hz
ik, it does sub 2k polling, almost 4k scan
Prelubed doesn't mean they sound like how YOU prefer personally.
There's nothing functionally wrong with the keycap or stabilizers.
ah I get that but don’t think me lubing them will make it sound different I put some dielectric grease into the wires
I don’t feel like taking this thing apart and it’s not the switch that’s the problem
If you don't have any plans to take it apart, then you're basically out of luck.
Gotta mod it to dampen it. You can try asking over in #🔧│keyboard_modding for best suggestions.
its rattling its has nothing to do with modding it im not saying its wootings fault and ive built keyboards before and know a lot of solutions I was just wondering if people have had a similar problem and if they have a simple salution other than having to tear the board apart
thats all also im not trying to sound rude if I do
Rattling is entirely a modding issue though.
But again - #🔧│keyboard_modding for modding questions and discussion. 🙂
eh 50 50 tbh if the keyboard came like this I see it as a fix to a problem jeyboards have not really modding it if im just fixing something
Agree to disagree.
You're more than welcome to make use of your 30 day return option, if you're not satisfied with the keyboard.
80he has something i call stabs roullete
@fair totem you have to roll on green to get good stabs
ah so some come with good ones and some come with not necessarily bad but rattly?
it's usually on the right side
yea same with all my other keyboards lol has this happened to people as well?
I have "perfect" sample
more common than you think
its so odd
well if im not the only one ig I can deal with it
it's fine, you can send it back and have a go with another roulette with the waiting and shipping being the only cost
I just swapped my stabs for ws knight v2 and never looked back
Or, you can mod it
people just switch it out, or roll again
yall thing I should take the original keycaps off and put my red samurais on it
or have somebody else mod it
Use the keycaps that you think look best
its not that big a deal if it really bothered me that much id fix it myself which would be way quicker
ik how to mod keyboards\
that's the spirit!
lol yea ill just let it be tbh
if I really get annoyewd and or motivated enough ill try and fix it
Q: Is there a way to configure the 80HE with a shift Hyperkey on macOS (e.g., shift-cntrl-opt-cmd) for hyper-a, hyper-b, etc. keystrokes?
Absolutely no idea what a hyperkey is, or if Apple has any special handling for this.
But eh... DKS? To make a one key macro that holds down multiple keys
i don't it's possible on the wooting software
Do i need to use wooting’s cable to get 8000hz polling or can i just use some aftermarket cable i have
Or does it vary
its better to use our cables, not all other cables work too well with the polling from what I remember
Alr thanks but is there anyway to check whether the cable is bottlenecking the keyboard from the software?
Like within wootility, I dont believe you can cehck for a specific cable. Just speaking from previous experience from other people that switching to the original wooting cable helped with keyboard issues that had. Not always, but sometimes that was the case
Ill just get a coiled cable from wooting then ig
Should’ve bought it with my 80he to save on shopping 😭
you get a cable already with an 80he, coiled cable is just an 'extra' for the vibe
just saying :)

TY for the info. I shall submit a feature request in https://discord.com/channels/167181566978555904/1141096226884956181.
got my 80he 🔥
fire, where did u get the caps from?
I can hit them alright, im just not sure if optimally
Ive got pretty big hands tho
do they feel good tho
they are pretty nice tbf
Hey guys so today my wooting 80HE arrived but it came DOA. What can I do? do I contact support or something?
that is exactly what you do yes
my wooting batch name is nowhere to be found lol does that mean i won't get an update till like half a year or something?
That usually means that whatever you're waiting for is not a keyboard, but instead some kind of accessory.
These -typically- do not receive batch updates, because they're on time, and there's nothing to say.
You should still have an estimated delivery date to fall back on of course.
I think you’re cooked
Did you follow any video guide on how to do this I’m planning to maybe swap my pcr case to zinc alloy in the future as well ,but never done anything like this before
I cant get the keyboard
It constantly cancel i live in a apartment
"Comes back as fraudulent" even though I followed all the steps
same thing lol
I think apartment are flagged
As "parcel forwarding service"
Apartment means level houses?
Basically
I might have to be buy the 60he from official resellers
I’m wondering if they’ll even find my house door
They should just call the customer when they’re outside instead of just instantly cancelling it
Contacting support is always the best option, though for your issue, I'd suggest opening it up and making sure this JST cable (picture attached) is properly plugged in
Are the LED lights on the individual switches or on the board? Not familiar and my Z key's blue LED color range is dead
Everyone has LEDs on the boards.
My gosh that looks sick 
"rear foot height doesn't affect performance" my ass, after installing the 6deg ones instead of the original 2.8deg ones my WPM went right back to 107...
what is the difficulty of replacing a busted led on a wooting two (original)? (sorry for offtop- not 80he related)
Yup

That just means you are 1. more used to that angle and 2. it might be easier for you to reach all the keys at that angle
but that means it affects performance
It affects performance in the same way having your desk at the right height and a good chair affect performance
It CAN affect your performance, the keyboards performance etc is unaffected.
No. It affects YOUR ability. It doesn't objective make the keyboard perform better 😄
i meant user performance not keyboard performance
is the keyboard's performance stuff like refresh rate, keypress delay, etc?
It's get flagged as fraudulent
For "being a parcel service"
Weird
I hope it won’t happen to me
Is there a way to disable windows key in game or smth?
Yes.
ty
Before they even start the delivery or they just don’t deliver it until your door?
When they place their order with us.
So he can’t even pay it?
Correct.
Oh, then I should not have that problem since I paid already
wooting has one on their channel of how to disassemble the cases
its pretty straightforward
theres just little clips in the cases you need to fit
But my house is the only “B” house in the row of “A” houses and all the delivery men go accidentally to wrong place and don’t find me, that’s why I just write “A” there but could it cause some juridic issues since that address doesn’t even exist
I did pay it and it just cancel immediately afterwards
Yes. That's what I said.
Mb
Tbh i dont really know why is it constantly flagging my only suspicion is my apartment
What do you think about this keycaps?
do you want me to be honest?
Hahaha
i think its really ugly
the colors are fine but the legends are rlly bad
and the novelties seem really "how do you do, fellow kids?" to me
it would have worked in the "no fear" era of the 90s but its kinda played out by now 
Live, Laugh, Love
now i want some nu metal themed keyboard
"it's just one of those days" across the space bar
Hello, I used the Wooting keyboard 80he for the first time today, so I installed and updated the Wootility, but I accidentally unplugged the USB port, so it stops, and after that, the light comes on like the picture, and I can't input it. The Wootility doesn't recognize the keyboard either. help me...
open wootility and click help on the left
you can skip the setup screen if it shows up
thank you so much!!!!!
Actually I have something like that
I’m looking for black and yellow color
Or something black with a little bit yellow
But is more stunning like this
I have a question because I bought this keyboard days ago, how often do you lubrificate the molls and switches?
i havent lubed them once 
Hey guys. I placed an order a week or so ago. And been keeping an eye on updates. And have just seen an update about a back order. And can view updates for an EU-Auto2. But I cannot see any info on that order. Any queries or help?
And how do you feel it after a long time ?
im also not a really picky person, I got my current switches for a while now and I dont feel like they need new lube

not needed often tbh
mostly when you feel like it has come to a point where you want to do it
tho i also havent given my switches much time to wear out as i swapped em out twice already haha
Otherwise a little bit saliva and that’s all 🤣
Wtf
lekker v2 -> geon raw he -> duhuk core he spring swapped with geon pingless springs -> "rawhuk" (frankenswitch, duhuk bottom and top, raw stem, keeping geon pingless)
bruh
Access and edit your orders, connect your discord, and manage your Wooting account.
its possible to order a two he with 8k pooling rate like the 80he ?
no
I hope we have a two 80he
You mean a 100HE - or using our old naming scheme a 3HE I suppose.
80 refers to the size. So a 2HE80HE is a mathematical impossiblity. It can't both be 80HE sized and 2HE sized at the same time.
will 100he have 10k polling
But with the new naming scheme the UwU would be a 3HE 😵💫
Or the 6HE depending on how you count it. Cause it has 3+3 buttons.
Right I forgot about the rubber buttons. Touche.
Send pics of keyboard pleeeeeeease
Ooooooh, hes got a good weekend in front of em setting it up and using it
thank you so much it worked 🙏
If you’ve made a ticket, feel free to answer to the auto reply you got with “resolved” - it helps 🫡
hello, i just bought the wooting 80HE Module and i ordered jade switches and a plastic case, does it come pre built
if no,
do the switches come pre lubed?
Not pre built I think
No. We do not provide assembly services for individual components bought together. Yes - All switches are prelubed during their manufacturing.
thank you for the quick response
prototypists just had a stock drop that included BRG R2's so as soon as they were available i ordered the base set + novelties (aplogies for the necro)
not interested sorry
i dont want to earn that much money
@tight cypress maybe you are interested in this
or @ashen pond
hittem with an everyone 
UNBOXING PICCCSS
Behold 
AAAAAAAAA

I am supremely not a fan of that box and will be expressing my disappointment on the packaging decision made by the fulfillment center 
My only question is why 2x sets of Lekker L60s?
I have a 60HE, I was thinking of swapping the V1 to V2
But I made that decision 1 year ago 🤣
Thank you 🙇♀️





