#🌟│wooting80he
1 messages · Page 274 of 1
kinda chilly but will heat up as the day goes. Only 8:30am atm
Getting warmer 
All of our snow melted Q_Q
angry68
its only better on paper probs, how a 30% keyboard can beat an 180$ in performance when all he keyboards nowdays are ~150$
i know that its logic i'm just wanna talk with some1 who tested it to see how he could defend a 30$ keyboard shipped on aliexpress
My caps doesn't work and is flashing blue
oh my that's further away than Cananda 0.0
Does anything show in the wootility?
maybe u just actived a rgb mode who do that
is this real ? if so wooting is doing a very good job
probably
so what you’re saying is i shoulda bought a razer, gotten faster polling time, same features as awooting
why are you surprised

any updates on the wooting white zinc coupon codes yet? havent got it in email yet
isn’t it a physical gift card shipped with the white zinc ?
No it is a code sent via email
ahh right, just i recall somewhere i while ago seeing gift cards mentioned and i thought i recall it saying they get shipped with the keyboard but possibly not
nah 1.8 ms is crazyy
no??
why did they test one keyboard at 8k and then the rest at 1k
oh right i just realised the table is stupid and in reverse order. Fastest should be at the top
? fastest is bottom lol
the more i read that graph the worse and harder to read it becomes wholly
look what it says under the table
idk
glorious 
wtf is tachyon mode
did they even try
disable rgb

why
8k scan rate for 80he
do you have to have that to enable 8k ?
disable rgb brightness with like 75%
nope
no, it just disables rgb effects, you will have static rgb for 8k scan rate
?
yea this
so they made a mode just to disable rgb 😂😂😂😂😂
I mean if your scan rate is 1k a higher polling rate makes no difference
Two different 8k there's 8k polling and 8k scan rate
and i think it’s like 0.005ms difference between 1 and 8 which is like 0
i live in canada we havent even had snow yet
now i’m even more confused
I’m in Canada and I have had snow
france got snow before canada
what’s the difference in scan vs polling ?
just crazy
damn i live more south
Makes sense I’m pretty north
scan rate is how often keyboard checks itself
Polling is how often your PC checks for the input from your keyboard, scan rate is how fast the keyboard internally scans for the input of keys
you can set 1k polling and 8k polling for now, they plan to add 2k and 4k in future
i take it most of the time tho - if you’re playing ranked/comp games. You’re gonna want to run mouse and keyboard in 8K scan and polling
without tachyon its ~1.6khz scan rate
do they add for 60he ?
no
bruh
so to get 8k you HAVE to use the Tachyon mode ?
You can adjust polling but scan is only adjusted through Tachyon on and off
to have 8k SCAN RATE yes
So in a competitive aspect it’s best to have Tachyon on ?
even if it kills brightness and rgb
u don't care when u play of ur rgb
technically yes but you probably won't notice any difference
aight ty ty ty
it just disables those fancy rgb effects, your rgb will be static
Realistically the difference is less then 0.001 seconds
and the rgb on tachyon mode is not that bad
i need tachyon mode to play tcg card shop simulator better
has anyone made a guide on like “configuring your wooting for competitive game”
like a guide that goes through all the “cheating” settings a wooting has etc
I need tachyon mode and 8k polling rate to get my waifus in genshin impact
like a complete guide that goes through polling rate and settings etc, best socd, rappy snappy all of that
And no human could ever notice that. I remember a video by Tom Scott and he randomly offset the audio by 1ms and nobody noticed it
search on ytb
It’s 0.000875s difference
this should be good
Twitch: https://www.twitch.tv/jaeky
Twitter: https://www.twitter.com/jaekytv
Instagram: https://www.instagram.com/jaekytv
TikTok: https://www.tiktok.com/@jaekytv
Wooting 80HE Code: cd726652052b0f260b5682302f08298a3af1
gratefully this vid i now use V5 wootility
I need 8khz for my competitive text editing
oh yeah this is perfect, exactly what i was looking for
yeah that’s what i was after. Something that covered actuation points and all the modes and features etc. Perfect
THE APPLICATION RECOGNIZES THE KEY, BUT THE KEY DOES NOT WORK
Hey guys, just ordered my 80HE with the double shot keycap set. Wondering if they come installed on or I will have to install myself?
did you order ISO
does anyhone else's keyboard start disconnecting and reconnecting? i built mine a few days ago and love it but after i use it for like 30 minutes it starts disconnecting and reconnecting like crazy. sometimes it gets stuck on some keys
if you bought it as ANSI with a PCR Black oer Black Zinc witg L60 v2s, those should be preassembled
mine was
Only if your PC is beefy enough to run 8K, otherwise it will stutter like crazy
7950x3D and 4090 so should be sweet

ive tried different cables and usb ports
Yeah just ordered the default PCR black
Are you using 8K with tachyon mode enabled?
No ANSI
it comes preinstalled
Thanks 🙂
hey eeveryone, anyone havving issues with their keyboard upon arrival?
noticed mine is ranomly pressing the "-" key when im typing the "o" and "space" key in a row
i have two different profiles. one has tachyon/8k. but the issue comes up with both of them
it should be preassembled if you didnt order the module separate from the case, and have the L60 v2s
idk if i should try rebuilding it? but if it works for like the first 30 minutes i'm not sure if i should
I was gonna point you to this, but if you're having issues outside of 8K then it might be a different thing: https://discord.com/channels/167181566978555904/1309425793704792064
i see
this is a really bad picture, but i have a small suspicion that the jsd connector wasn't properly installed
but if it wasn't properly installed, would it even work at all?
It does look crooked and not fully seated
@tribal scroll yeah... might try rebuilding it
worth a shot
its getting colder now but is this how its supposed to be?
It was more than warm
No clue actually, if you used 100% brightness maybe
I got my wooting a couple hours ago and it feels amazing
Its lubed almost perfectly and sounds beautiful
Plus the quality is really good
does the wooting 80he come with the abilty to turn off certain shortcuts like alt + tab or the windows key?
fn + win key to lock it
windows key
what about alt tab
you can unbind alt in wootility
mine is getting hot aswell
I never experienced mine getting hot
Are all keycaps bent like the default 80he ones? Im looking to buy a new set and I'm not sure about the curvature lol
Is the white aluminum case TBA?
The what now.
white aluminum, which is real

🤫
So will different cases ever be available for the 80he on the wooting website or should I just spend my store credit now
okay so I have to open a ticket and refund or what
Cuz I'm the 2nd one in this whole discord
im in na whale it feels like everyone got their 80he but me just waiting for fufillment queue
Nothing announced - But never say never.
<
To be announced'
Am I the only one who's 80HE does ghost inputs out of nowhere
I dont know
The keyboard basically becomes unresponsive unless I unplug and plug it back it, this is wack lmao
I would contact the support, could be a defective unit
@magic i was having issues where my "-" is getting typed when i hit the "o" button, i already sent an email to support
tbh though ive been sitting here spamming it in a notepad to see if there was a pattern and it hasnt had the same issue in the past 1000+ strokes so idk anymore lmao
I hope they get this sorted out soon, waiting for my 80 HE and became a bit wary after reading all thos reports
That's my guess as well:/
It hasn't been a week, I was playing Minecraft and my character started walking on its own but all the keys became unresponsive only WASD was working
My work around was to unplug it and plug it back in but that's not an actual fix, I did update it on day one so software wise I know I'm good
I don't want to go back to my Logitech keyboard lol
I lowered my polling rate to 1kHz to see if that helps 
Change switches, also neighboring switches. Make sure it's not a switch issue. Maybe lower the actuation point a bit
I'm no keyboard expert so I left everything on default settings, I use the Typing profile
pinned in #1019755933959733258
Appreciate you gangsta
hey so i was planning on getting a 60he and am leaning towards a 80he now, im thinking of getting the module, pbs case, and Everglide Sticky Rice switches, what other mods could i get for mabye stabilizers or pads and whatnot. this would be my first custom build
jemand Deutsch?
I have the same questions about the stabilizers, i heard they are good but what do ppl change them to if they do?
Sticky rice switches have problems don’t get them
V2s address the magnet issue i believe
Interesting
I would get the everglide rice pudding, has standard legs to mount easier
same sound
Are they expensive
6.79 for 10 on milktooth
im not sure where else they are sold
do the stabilizers need lube or nah?
mine were overtightened
For better sounds
I’m soooo excited!!
For the 80he, if you enable tachyon mode does the led bar turn off too? Or just the keys. Or better can you choose?
just as you would other ones
LED bar is on, just limits RGB to 70% and no effects
Anyone know if the 80he wrist rest on the website is actually in stock? it says pre-order, expected at warehouse november 9th.
Are you ordering it seprete
Unless you unlock it to allow it back up to 100%
true but that woukd involve disabling tachyon
which was the question
has anyone else had an issue where the keyboard just kinda stops receiving new inputs?
It just repeats the last entered key en perpetuity until the keyboard is unplugged/plugged back in
oh
I got a couple of questions that someone here may be able to answer for me....Thank you for any info or input... 1). Can I use Version 5 Wootility with HE60+? ....2). Two nights in a row now, I've been playing 7 Days to Die and a couple of hours into game play the 'Left Shift' button quits working, although when I went to options to make sure the key was still set in the game option. It was, but I reset it anyway and it still didn't work... The next day it was working fine for a few hours and it quit working again...instead of crouching, it would stop all motion..........anyway, I switched keyboards and computers to see if the problem moves with the keyboards.... Thinking out load
Yes I plan to, already got the 80he
- Yes
- Try swapping switches and test the switch when it works and when it doesnt work in the analog keystroke utility indicator in wootility v5 and see what happens there. Try swapping USB ports, try using a higher power USB woth a shorter cable length. If the board is actually faulty you may need to RMA it.
You don't have to disable tachyon to unlock the rgb brightness
eh??
is it because i wasnt using the cable kit or?
because i have been using the 60HE+ cable
There's a lock you just need to press it to unlock the rgb slider
oh i just thought it was locked, period
It's like that for compatibility reasons I believe chances of power related issues happening creep up the higher your brightness
good thing im just used to 70% on wooting because the LEDs themselves are just that bright
Yeah the north facing rgb helps out with that
Thank You for the Brain storming.... you gave me a few extra ideas to try.....Thanks again for the quick reply and feedback
the only thing that isnt helping is the top housing of the RAW HE switch because it's almost opaque haha
that wpuld be my only complaint about them, but if there was a variant with not a transparent top house but a hazy translucent white top housing that would be really cool, kinda like a secondary light diffuser in a way
otherwise they are pretty much perfect for me
Anyone have a sound comp of zinc alloy/PCR?
and am i losing out much by going PCR?
another day checking if na batch 2 white zinc v1 is out early 
Is it normal that the case near the space bar wobble?
hi guys, wanting to order a wrist rest for the 80he, is it worth it? if i add the wrist rest to the current order of the 80he, would it make the waiting time longer ??
i dont think it will change wait times
Like just under the space bar. Anywhere on the case
I have it it's pretty nice 🙂
are hejin, 禾金, grain gold, and everglide the same??
nvm, hejin, 禾金, grain gold, are the same
im not sure abut everglide

My shipping label was created 10 days ago, no updates yet 😵
describe taste
if you're eu brug group 5, i think tomorrow is the fated day (shipping time)
What’s the quality of the plastic like?
I’m asking cause I bought the black abs
I heard mixed stuff so far…
mine comes tmmrw 🔥
I fell in love with the aesthetic of the black. It was beautiful especially with led
Today is the day
What’d you get?
I get mine
80he plastic
I'll give you my opinion when I get it, also have the same kind of color and plastic
same kinda it's 5:30 am and imma sleep so it's tmmrw for me
i was eu brug
Burg
then it changed to walvis
It's naow burg time, late next month is walvis
how do i know if rapid trigger is turned on or not?
Just bridge in dutch
Walvis id whale in dutch
Better let me know lol I’m too excited rn. What was yalls previous keyboard and why did you switch?
yeah but look at my roles
So we get dutch lesson I guess
Prop got moved to burg because of extra inventory
^^
nah i was brug originally
Mmm, weird
then got moved to walvis
Lmao
but shipped like a week ago
How many times did the 80he get delayed
Like 3
how do you not know
Damn😭
very easy to tell when rt is on
Wait so I have a question. The 80he has a gasket mount but not at the same time? Still confused on this topic
everytime i close the wootility webpage and come back it shows its not enabled
Makes no sense rlly
You'll be fine, only need to worry about Christmas
which version are you using
Like did they cheap out on the gasket mount or like… someone educate me about it
At least you dont have to wait until Chinese New Year is over
5
weird haven't had that issue
you'll be able to tell because you can release your input
Woah how is this chat so active at midnight
Dunno
Is it normally not active
in quick setting i hover over rapid and it shows its on but in the rapid trigger page is shows as not enabled
3 more hours of wait, to see if it'll actually be delivered today
It's a firm gasket mount
Cause hall effects benefits from the stability
softer would work ofc, but its not idealist
LETS GOOO IM USING IT RN AOUHBFOAHFSOHAH
Mine got here
yey
Oops upside down image
still waiting for the delivery driver
mmm geon raws
Am I the only one with this Status? :3
oh i click on the circle itself ok im dumb hahahahha
that would be so awesome
Ye cause them stuff going to be priority in warehouse
Could you only buy white zinc with the keyboard? Because I want it but I cant buy it by itself
Cant buy it anymore
Can we please find out whats going on with white zinc @mods
Ive been too busy to keep up with an update if there was any
My keyboard came yesterday but not getting it till Christmas 
I'm not even white zync case buyer
For me went from 5th november ( oreviously was october) to the 3rd of december)
#📦│batch_updates message the last update
There should be a video coming soon
I consider myself lucky
Where do people go to look for keycaps when they want to buy some for wooting 80he?
I really would prefer a simple line of text explaining whats going on instead of a 10min video i genuinely dont have time/focus to worry about, I know its your thing to do cool vids but maybe save that for features and fun stuff and not reasons for delays.
I have paid over $500 and all i am getting is marketing jibber jabber
the batch updates is the text version
My order status hasnt changed for weeks, I would like an explanation, the batch updates are extremely unclear and dont actually give any idea of when MY batch is going to be ready, but thanks for your input
The info you have is the best info wooting can give you
"White zinc v1 preorders
Good news! The keyboards are en route to our fulfillment centers in the US and the Netherlands. "
Having worked in electronics retail my whole life, I know that is almost certainly untrue
i'm not really sure what more you want
There is more info, they just arent communicating the cause of delays
ah okay another expert, time to leave the conversation
Yeah, 20 years of literally managing stores and selling this exact type of equipment, so you can leave all you want, that doesnt change the fact.
It could be held up by customs, there could be delays in the shipment because of christmas rush/chaos etc etc etc
Be in my shoes, we are a select group of people who said, NO WORRIES, we'll take the 'defective' white zinc alloys that are ALREADY produced as is and the credit, and yet we have been pushed to the absolute back of the line and that doesnt sit right with me. I understand the time of the year, but our due date was almost 1.5 months earlier when all this happened, and yet our batch kept getting pushed - so I am looking for a reason considering they were 'already made'
weren't you batch 2?
: EU-Brug-White-Zinc
Currently in: Shipment to our warehouse
Your product is on its way to our warehouse
for the last few weeks
yeah but you said already produced
at the time of that thing it wasn't already produced
yes they just have to update the status
well the email we get asking us to make a decision implied they had already made a batch
batch 1 is the ones that were already produced according to the timeline you posted
cos people were already receving them
that was batch 1.
hence the 'defects'
batch 2 wasn't already produced yet
eu brug is batch 2
Respectfully, I work 2 jobs doing 7 shifts a week every week so it has been tiring keeping up with wootings timeline at this point, and I see that you are trying to gotcha me in some way, when all I am looking for is an explanation for the 'shipment to warehouse' being held up
not the parts prior at this point
it's not a gotcha... you're batch 2 and trying to apply batch 1 timeline to your order
Maybe you pereceived it in that way as i recant the whole experience, but my initial quesitoning was regarding the current stage irregardless of how you chose to feel
okay i see this isn't going anywhere and you're just venting so i wish you good luck
Do you even work for wooting? or are you just wasting your energy on something you have no bearing over?
My guy, look wooting is not mass produced the whole time, its getting produced in batches, your batch is batch 2 like mine, i got the same date and same status, we are still getting the white v1 like we choose too, they just had to start production again
maybe they even alr. made some small improvements while that stop we don‘t know
Based on what they told us this wouldnt be the case
wooting does multiple types of info
what i'm confused with is isn't the white seemingly still fitting the schedule they gave before already? It's supposed to be a couple weeks behind the batch 2 deliveries, which are happening now, so it's still fitting the last update they gave isn't it?
videos for people who like speaking instead of faceless text
and text for people who dont have time
then he asked for the 'simple line of text' update and people linked him the text update, then he said he wants more details while also saying he doesn't want the video explaining those details
and if you read they told us, they are coming to the warehouse the 20th, and they are most likely gonna start shipping the 26th
Thanks, this is all I needed
and if they wouldn‘t be at the warehouse yet i think there would have been some explanation why its late
lol wtf
Relax dude maybe go spend the energy you just did on something more meaningful
he said thanks to calslock when he was angry at the person before linking and giving him the same info
brother
you just said the batch update were bad
he was literally given the exact same link and info before and yelled at people...
nvm fk it
i even copy and pasted the white zinc part for him lol
broski i don‘t understand it either
sry
I said my order has been stuck in the same status regardless of the batch updates
That's unfortunate but there is nothing we or the wooting team actually can do
Yeah look im gonna be honest having to dial into a discord channel to get updates for a keyboard ive ordered is a first for me and I didnt even really know there is a channel here, and I had not gotten an emails to that most recent 26th november update hence me coming here asking the questionb
thank you all, love you @midnight iron
the same update is copy pasted to the website iirc

you can check that if thats what u prefer
I didnt know about it, i was expecting an email like the last major update
i cant wait for my wooting to arrive
Uh no.
The 70% is a soft lock you can disable. Always been able to.
No. And it's probably ruining whatever scanning gains that Tachyon would otherwise provide.
Freight shipments take several weeks, especially during peak season.
Once your shipment is ready to go, you'll get an email.
Fortunately you do not.
An overview of all batch related news.
under performance
Wait, 80HE has Tachyon?
Since when is it back? I thought the 80HE didn’t need Tachyon because True 8KHz was basically Tachyon already?
I was under the assumption it didn't need tachyon for that when I was backing it, and tachyon was more for stability than anything
100%, there were quite a few talks about it not needing Tachyon.
i thought the same tbh
Very interesting, I didn’t know this yet.
So without Tachyon enabled, what’s the scanning? 1KHz?
i mean it says 1ms so that would mean 1khz
i mean what's interesting is sometimes my 80HE at its best when tachyon is off, my board felt VERY RESPONSIVE with RGB effects, but that doesn't happen that much, most times it doesn't feel as fast (even with tachyon) than my 60HE+ with RGB effects
funny that you keep typing this everyday instead of emailing wooting
The topic was brought up is all
So essentially, the 60 and 80HE without Tachyon have almost identical latency?
No. The 80HE still has better out of box scanning.
I vaguely recall Simon saying it's 1.1 or 1.2khz or something? on the 80HE*
So it’s not 1KHz?
Ah, a what the heck moment again lol
No, somebody from wooting team mentioned months ago that without tachyon mode 80HE has ~1600hz scan rate
Ty
Is the beefier MCU capable of True 8KHz with RGBFX and it’s just the firmware that isn’t ready/optimized yet or is it not capable at all?
Rgb will take away performance from any mcu no matter how beefy
The only solution is if you specifically did dual mcu set up just for rgb
yeah a dual MCU
or a more powerful MCU
A performance decrease is fine as long as it’s still capable of the advertised performance.
so i just asked about this and the main limiting factor seems to be hardware design as the rgb signals can mess up the scanning signals. so maybe in a future hardware revision
wouldn't a dual MCU require a PCBA redesign?
future hardware revision
we need 2 Marvel Cinematic Universe
true haha
the good thing is the second hypothetical RGB MCU doesn't have to be super beefy
we prob wont do dual mcu unless necessary
rn its more of a signal isolation issue on the traces rather than an mcu issue (from what i understood)
true, there is still headroom in the current design, just needs some more TLC
idk if anyone has tried this but besides me has anyone out of pure curiosity tried using it tachyon off rgb effects on, tachyon on rgb 0% for a few minutes, and re-disabling tachyon? the only difference is that instead of relying on feeling it's an objective measurement
half of the time this helped a lot for my 80HE
what im gathering from this convo is that i will probably buy some nice non shine through keycaps, turn off rgb and call it a day
if it will get finally shipped that is, im really last order on EU-Brug 
btw this is a general question about polling rate, but iirc in the thread about polling rate, i think it said the voltage drops when the polling rate increases from 1k (3.3V) to 8k (0.4V), does that mean that hypothetically if the 80HE had a 2k or 4k option, would it not drop as much as it would on 8k?
still waiting T-T
ngl but the support is a let down , they could have just sent an email or mention it in tracking that there's a delay
dont worry mine is also still on ready to pack
is there any forum to get pro`s wooting profile code?
Val?
yes for valorant or just rappid setting
Our recommended profile: ea9211ad333796179d9e156cb7d655543850
Pro-player profiles:
C0M 518624fcb21fcc3d26cfac66f435c6f63601
f0rsaken 2b48c5a201b009c6924738795b3d5b9c43d8
Jinggg 5045cf9f00555dfb3c352c5414d26f1f9014
Derke 9f00a8585647242337b0c011abd8e47f63d1
Chronicle 45bbf6536a15c895f13bf128c877745acc57
TenZ b5dee39aae048fcc773067ea67331a5104c1
...
there's a question on my 80he which is Ghost PCR , when i set the same color of the bar, some squares' color is not same as the other squares, such as the first square and the 2nd square(this is white, but is more like to purple)that's normal??
There will always be a slight variance in the LEDs, as they are created using a non-perfect chemical process.
As for them showing up slightly pink/purple/lavender, this is because there's no such thing as pure white when you're using a red, blue and green LED each to try and create white by turning them all up to the same level. You could reduce the red value slightly and likely get a more white, white.
Basically the same as "silicon lottery" as they are diodes just like transistors
Logo away from u
the light diffuser with the logo is north, or away from you
stem on top side
I see. One more question; was this limitation known right away or was it something discovered later on (during the later stages of the 80HE)? Looking back at the videos, there doesn’t seem to be any mention of this at all. The 80HE page does say “supports up to 8kHz USB polling” but IMO, that’s slick marketing, something we’ve come to expect from the Razers and Logitechs but not from Woot. It might be just me but it seemed like the 80HE came with True 8KHz from factory and that “True” 8KHz was without compromise.
simon discovered this later. he actually tried doing it in a way that both run but the issues this cause for some people internally (very instable sacanrate) meant it was cut for now
hardware was also already final at that point
@tight cypress Do you happen to remember where you got your banner from? (Banner on discord ofc)
(Mb about the ping xd)
Gimme a sec, I'll find it 






Im still wondering tho 
This is not the miku channel

wrong

we in a miku server
optium keycaps for the 80he? 👀
if there will be case for it
anyone else having more than warm temperatures with the 80HE? https://discord.com/channels/167181566978555904/1310373910491037726
week 3 in fulfillment queue im just excited for my wooting fr
Does it still happen if you turn the LEDs off completely?
if LEDs are at 70, it is just slightly warm
<70 its not noticeable at all (currently its negative degrees outside so I will need to monitor it in summer again)
Then you have your answer. It is perfectly normal - Metals transfer heat more efficiently than plastic, and so your case sucks up some of the LED heat and into it.
How do yall use your led bar for? There’s a lot of ways
makes sense
so is it technically producing more heat than any other keyboard or is it just because of the metal transfer heat more efficiently thingy
Built in hand warmer for the cold days
aight, so me dumbo (basically
)
Thank you very mucho @buoyant solstice ! God sent help 
omg
I'm asking the question again since it's way more busy at that time then last night (Canada time). Just got my 80HE. Awesome keyboard 😄
I was just wondering if it's normal that the plastic case(ghost) wooble a bit just under the space bar?
Insanely normal people whine about it all the time
Idk if it was a thing with the 60he. But yes it is a normal thing and is a thing with every 80he that is plastic.
And the keycap wooble a bit too right?
the fact that my actuation is so low made it that i cant use rapid trigger 
Every keycap wobbles somewhat.
It’s gotten better with the new switches but yeah.
Thanks eza. Sorry for dumb question
Nah no problem! Do you find the plastic bending thing an issue during gaming?
The quality of the plastic is quite questionable from what I’ve picked up from others
Not really!! I just want to make sure the keyboard was ok!!
I got a zinc alloy case, so I might not be your assistant
but I heard that some of the plastic cases are not fully snapped into place and are apparently delivered like that sometimes.
Yes it's a bit on the cheap side
I have a old hyper x alloy keyboard and other then the technology, software and switch the material itself is quite low
Yeah they cheaped out on the plastic. But if you really care about it. They should be releasing an aluminum case? It just would make sense too. But don’t quote lol.
personally i havnt met this issue
Under the spacebar
nope no issue for me
if its an issue for you, in the future
you can always upgrade the case
Strange. I’ve heard about it many times lol
Then it might be a non conformity
Exactly
Do we have wooting employees that could let us know
Hopefully. But I assure you I’ve heard about this issue many times about the plastic being lower quality and your specific case.
It’s not just a you problem. But I find it weird that @pulsar grotto doesn’t have this issue
I chose black plastic fully knowing this would be an issue
your keyboard isn't going to bend during gaming lol
the issues with the plastic case are more people don't like that when not gaming they can push on the bezels on the front for example and make it move down
He knows that. He’s saying the plastic under the space bar bends under pressure.
but realistically you're never going to do that movement and it's just a byproduct of the shape of the design
dont press it then 
in future maybe they don't put bezels there so people don't have a random point to push down there
it's kind of a big nothingburger honestly
He knows that. But it still shows the quality of the plastic. It’s not irrational to question it
it's not the quality of the plastic
it's the design rigidity
you can use the same quality plastic and make it a square box and all the previous pushing down points disappear
I understand, thanks!
which honestly maybe in the future they do that because it would actually be cheaper and easier to make just a square box case
I was answering his question he asked if it was normal or not
But yeah I get your point. Thanks!
if anything the plastic they used is probably more expensive because they picked recycled plastic
so it's never been a quality or cost issue. It's just a design path that maybe in the future they don't do because people mix up quality of plastic with design rigidity
Does the incentive for recycled plastic really boost revenue. Wish they went aluminum. Even the cheapest type of aluminum would’ve been better especially for the price.
if my plastic bend i need to press it really hard
no, wooting doesn't care about min/maxing, they're just trying to do what they think is right for them or that they can do
Understood.
It was just a check question to see if it was a only me
I don't mind! And still love the keyboard!!
No worries it’s just a conversation. But yes it is normal!
they wanted to use recycled plastic cause it's better for the environment and it's something they can afford to do, same with using degradable packaging etc
And it's good they do that we need to take care of environment
Ohhh that’s why they went with zinc. It is biodegradable
i think that might just be a happy coincidence if it is
Elaborate?
Discussing my new main hall effect keyboard after using the wooting 80he since launch and recently modding it out. I personally feel that the HM80 is more sensitive/responsive even on the same actuation/rapid trigger as the 80he. Wooting software/warranty is better and it's not worth switching off if you have one, but they "need" to lower deadzo...
I get your point I just wanna see the reasoning
they did zinc because it was easier to make case designs instead of full cnc which would have been design and cost prohibitive
and wooting kind of just like learning how to do stuff and make their own thing, instead of outsourcing their case production to some factory that already makes the cases for everyone else
Yeah that does make sense
what about it?
If you think it’s a coincidence, why not go aluminum? It’s easy to machine and corrosion resistant
machine is super expensive
maybe interesting for the wooting devteam ... or worth an answer from @bright jewel ... dunno
play with it

this has been discussed for awhile already, do you have a question about it or something?
Zinc casting is cheaper.
oh sorry ... than im too late to the party
And easier - And that's exactly why we did it in the first place 😄
Ohh
What’s that about
so that means that trying out a S-Pole switch in the wooting keyboards will not harm the PCB?
I may or may not be late to
The party…
this man just replied to a post from start of the year lol

tl;dr is that boardzy wants sub 0.1ms settings to be open
where is the discussion ... i cannot find it ... the video is from yesterday. and i scrolled to yesterday 1 am 🤔
it's a debatable topic on how useful, not useful that is, but it's definitely something that wooting could do in the future
Oh okay, thank you! You’ve been quite helpful
I appreciate it!
shrug just search boardzy
thanks ... i will give it a try
there's not really much to be said beyond it's maybe something wooting might add in the future, but it's probably not a priority right now when they're working on other bugs and things first
Who is the biggest competitor to wooting. Is the iqunix actually better?
Or people just saying that cause they’re tiring of saying wooting is the best?
the need for 0.01ms settings is a lot lower than boardzy makes it out to be, but i get that he just is one of the small amount of people who might use that setting
Fair point
i do 100% agree with his point that wooting should have better stock switches that match up to competitors though, but i'm sure it's something they're aware of for the future
Anyone knows what happens when I try different hall effect switches out with the wooting? Is there a possibility I can damage the hall effect sensor?
No.
you can try other switches
soulth pole or north pole makes no difference here?
What’s your thoughts on the iqunix 63/60?
The magnet is in the center, so no. But with south facing, you're going to lose out on LEDs.
okay keyboard, software could use more work
S or N Pole means the magnet, not the switch orientation
i don't care about latency at all though and I'm more of the school of 'i just want my keyboard to 100/100 times i press strafe I want that strafe to press and release when i expect it to'
and a lot of newer keyboards don't pass that bar
Good point!
What was your previous keyboard before you made the switch to wooting?
consistency of firmware is 1000x more important than whether a keyboard is 0.001 seconds faster or slower in latency
mx keyboards, customs etc
Check the compatibility list. Our sensors only support one polarity.
but i still use them for work because non HE switches are still nicer sound
You have the 60he or the 80he?
both
Perfect, so can you educate me about the gasket mount on the 80? I’ve heard things about it that’s quite confusing
If that makes sense
it's just more for isolation and a very small amount of softness to the press more than anything
it doesn't function same as a full custom keyboard gasket because HE boards don't work well with crazy amounts of bouncing
Thank you, what 80he did you get
ghost/raw
Good choice! Do you notice any differences between 8k polling with the 80he and the 1k polling with the 60he?
no, no human can notice the difference
it's 0.001 seconds at best
that's the difference from 1k vs 8k
But bigger number better person
is the standard keys good or should i buy custom keys?
and more like 0.0005 seconds on average since 1ms (0.001 second) is the max time between 1k and 8k, so on average it'd be half that gain
The standard keys are nice honestly just plain but they feel good
Do you think it’s just a gimmick ?
I wouldn’t say gimmick because it is an advancement the changes just aren’t gonna be as big until a massive new development for improving keyboards is discovered
If the technology is there why not use it kinda thing
I think it was needed because everyone else was adding it, but I don’t think it matters at all
is there a way to turn my mouse into a joystick aswell so games dont have a stroke trying to constantly change input methods whenever i move my mouse
It would have to turn into the same joystick. And that is not something Wootility can currently achieve.
that sucks, i hope it will be possible one day
hmm KBDfans is offering an aftermarket case for the 80HEmodule now
which colour did you pick?
I'm wondering if/when they might offer the other finishes like the Tofu60 redux...
cant believe wooting alrd fell off smh my head
i glt green and pink

Am so happy
Getting the GT-80 case
Could you recommend a coiled cable for the 80HE? Will any of them work properly?
wooting already makes one
I might be a bit biased but I heard the wooting coiled stealth is quite nice 

I am using the purple premium aviator cable from keychron and it does work with tachyon mode 8khz
https://keychron.de/de/products/keychron-premium-spiral-fliegerkabel
Is there any discount coupon for the wooting 80he?:)
DISCORD DISCOUNT
(And it looks awesome IRL, you can see it in my setup here: #1309248161335738369 message)
I didn't understand, what would be the coupon code, I want to buy the 80he
another day checking if na batch 2 white zinc v1 is out early 

there are only personal codes you get in your rewards section after you made a purchase
Is the wooting hub going to be updated for white zinc today?

hope so, they said it would start shipping tomorrow, but no addy confirmation yet 

Life of a white zincer is hard
i hope between today and tomorrow i need this kb already 😭
Bro brought out the big guns 🤣
Only 1 more week before we enter end game waiting 🙏🏻
Maybe it’ll let me get my Jade pros before it arrives 👀
I think Im used to the sound and feel of the 80he now, it all feels normal
day 4 btw
was kinda worried the lube was wearing off till I realized after 1 google search thats not the case at all and that Im just used to it now

is it possible to fix spacebar ticking without taking the keyboard apart?
Are you talking about the right side of the spacebar?
anyone know if wooting is gonna do anything for black friday?
Nah, no sales
They never do
You can find some 3rd party switch sales, but that’s about it
If the wires for your stabilizers aren’t perfectly straight/balanced properly or your stabs need some lube, you will need to do some modding to fix stab ticking
Does your spacebar rattle? If so, you can lube your stabilizers and that should help.
After accidentally accessing the old Wootilgty website, when I accessed Wootilgty for 80HE, the profile that I thought I had saved onboard was gone. Has anyone else done the same thing?
omg my order finally changed to pick and pack status 😭
Both sides sound bad. I seen some people do syringe lubing which does not require me to take the keyboard apart but i'm still unsure if it will work with this keyboard and what lube to use.
do u suggest i get the 60he+ or 80he
lubing will work and what lube to use well idk that will require your own research and askin around
Krytox 205g0?
yo thats what Im sayin!!!!!!
I havent pre ordered the case because 1 I'm broke and 2 I dont wanna deal with waiiting for another preorder lmao
does anyone has a promo code for kbdfans and another question is which switch would be better (both sound and performance wise) ttc or raws
They’ll announce the shipping date on the 30th 
I will for sure get it in the future
Or something like that
even so I dont wanna wait like 4 months XD
I know
I still gotta wait till January for my 80he
sadge
I'm planning on getting a custom keycap set for my base 80he whenever I have money
Ohhhh what were you thinking of going with?
I'll dm you them since I'm gatekeeping cuz yk how limited keycaps sets are XD
I love gatekeeping too 
I’m thinking ima have to get one as well the green they got coming out really caught my eye
does anyone has a promo code for kbdfans and another question is which switch would be better (both sound and performance wise) ttc or raws
I like the sound of the Jade pros 
hello my wooting key lights are not working
dont know what happen its not turning on
Im getting white and gold without the metal badge and with the strap option
lowkey thinking about switching the gold to silver tho

I’m feeling green and gold with the little badge and maybe a set of resin caps to make it pop even more
No LEDS are lit up AT ALL? The keyboard functions otherwise?
I bet you have an RGB controlling app running elsewhere that's taking over.
EXACTLY THE SAME HAHAHA
aint the strap option already included in all or did i read it wrong?
Which strap?
60 strap
rightnow i dont know what exactly i want 😄 i did preorder pbt xrays, im not sure which extras will look good with white case
wooting is actually torturing me
no like the option to have the buckle to put a strap on it lmao
Thanks for reminding me to disable PMs, @hearty elbow
yea aint it already included?
but yeah it should I believe
I don't see any strap
was talking about the strap buckle lol
oh boy...
strap buckle but i was wondering if wooting had plans to sell their strap in the future?
#1019755933959733258 is a good place to start.
Best advice I can give is contact support if you’ve tried everything to fix it with no luck sounds like a warranty claim
It's clearly an end user problem.
customizability :D
kbdfans is hitting me with shipping and taxes -.-
i thought someone from server got this common problem so have any solution
i already got hit with that just today lol
May not be tho I had a board arrive before not a wooting and the leds were doa
same amount or less 😄
should i reset ?
Again #1019755933959733258
Go into your start up apps on your pc and make sure no light controllers are on at boot then try
so anyplans on selling the strap on the 60?

open aliexpress, search for wooting ribbon or wooting strap
done
which switch do u guys use to play valorant:)
Or just "keychain", cause they all seem to be using near identical measurements. We've got plenty of folks in #1070668460905988106 sporting ones from Ali.
Sound wise raws by a mile. Performance wise ttc magneto will be less wobble on bottom out (but this only comes into play if you use very sensitive settings)
yep that also works as i saw
gonna stay on L60 v2's personally
what is the strap of the 60 made of? id like to find a strap of similar material
problem solved. after reset
like resetting the kb or pc?
... Getting used to this and 80% size is gonna be a bit of an endeavour. The sound on the other hand? 
starting to hate the 80he too much customisation , i havn even use the board much 
must customise everything 
Oh, you're not supposed to use the keyboard.
You work on it until it is perfect and then start another project.
sorry for the noob question - just got my 80HE set up and was wondering how to enable the light indicator for volume change? I downloaded and installed the desktop app but I'm still seeing the option greyed out...
The daemon doesn't exist yet.
Anyone else having prepare for shipping for weeks?
Mine’s been handed to dhl since yesrerday morning but they haven’t received/ processed it yet 😦
Oh btw wanna ask if i put a mouse in the travel case it applies some pressure to the keyboard is it fine ?
My previous travel case had more space so i can fit a mouse in it sadly its a 60 case so i cant just yeet the 80 inside of it
thats not even that bad
couple of years ago the shipping would have been triple the price
if your in the market for a new mouse i know of a brand that comes with its own travel case
I dont want another travelling case 
thats fair i dont have my board yet so im not to sure how much extra room is in the case
Let's goooo!
i'm actually being neglected. wooting hates me
same batch as u and still 'ready to pack'
Hopefully soon for you too
the finish line is in sight, hoping my white zinc ships out tomorrow!

we've rly been through so much together, viva la revolution
wiggle it and pull out
Your struggle and lack of sacrifice will long be remembered 
Its still like that for some companies:D
yeh i used a non wooting one and had no issue with my friends keyboard, some were a bit tricky but no real issues
if ur vibes arent positive it wont be tomorrow i heard from Mr John Wooting himself
Nah the switches are just manufactured ever so slightly too big
thats true :D
I think the issue might be on the switch plate more than the switches. I've put 3x different switch types into my 80HE and they've all been tougher to pull than from the 60HE.
module + geon raw users winning 💪
Less skus = better
its so much harder on 80 for whatever reason
why does the light bar start out with 2 blue and a bunch of lime colours?
Profile colours.
keyboard finally arrived
help, any solution if got canceled payment ?
Does this mean my LED is dead?
https://www.youtube.com/shorts/BydP9J5zab0
Also I am experiencing a strange phenomenon when in game, the wooting 80HE randomly just stops accepting input unless I plug in and out the keyboard. It stays lit up but stops working.
Also sometimes the light bar on the right stays lit a little bit of the way with no keys pressed (I have it set to show keypress) is that also a thing?
Pick the category and issue you need help with, and we'll guide you through the process.
got this reply from support mail
“Currently, support requests take 1-2 weeks before being resolved. We know that this is unacceptably slow, and are attacking this problem in many different ways”
And it looks like red led might died
It sounds like they will take 1-2 weeks. Nothing we can do to affect that.
Pray for white zinc leaving the warehouse tomorrow 
do you know which group?
Any plans for software updates? Keyboard locks itself up, it just hangs, whenever I play rapid profile below 0.4 mm actuation on all keys
Only thing different is the 3.4mm vs 4mm travel
Something is up with your stabs or keycap if you’re getting sticking on 3.5mm switches
Has anyone here tried the jade gaming switches?
Honestly sounds like something up with your stab
Well we don’t know without seeing it ourselves but you’d have to take out the stab and see
We have been abandoned 
will be added in the future, should be a video dropping on YouTube soon covering more details
Ok thanks
but those who changed their order from v1 to v2 are priority before it gets re-added to the store I imagine
2025? That's a whole dang year away!
I know that if you send an email related to Wooting's After Service, it takes a while to receive a reply (more than a week). So does it take more than a week each time you send and receive a reply related to After Service?
With 100% certainty it takes exactly as long as it takes.
ok thank you
I live in Asia, so I don't know if after-sales service or exchange is possible
I think it's been about a week since I received it.
its doable. i live in asia and have had no issues
You can return any product within 30 days of receiving it as long as it's in its original packaging and in good condition.
You will need to pay for return shipping
I'll have to wait for your reply. Thank you.
once you get initial reply then the next replies dont take as long
I didn't intend to return it, but my PCR plastic case was slightly damaged. I want to continue using Wooting. I left an inquiry about exchange or after-sales service.
Thank you for your reply. It helps me a lot.
Ah I see. Warranty cases will indeed be handled via email.
Anywhere we ship to, we handle the warranty for
Thank you Mark
Thank you for responding so well to my last inquiry.
I appreciate how polite you are, gon 
News on na batch 2 white zinc v1? 
You may not remember, but I had an inquiry about delivery, and Discord explained it well, so I received it easily.
Glad to read it 😄
Thank you always, Mark, you are a good person.
Any news for the white zinc case V2?
None yet
Anyone got problems with the keyboard just stop responding? Have to unplug/plug in
Thank you so much, have died x amount of times 🙂
eu-brug
Mark, address confirmation tomorrow for white zinc? 

🙏
group is for what product you bought
i've been waiting since aprilo
sucks to be u
oh black zinc us ansi
you should be seeing a shipping label pre soon. i just got the tracking number and i also bought the same thing
do u also have the same as me?
yes black zinc ansi with a wrist rest
exactly the same as me
hope i'll get it soon
some people who ordered the same as us have already has theirs shipped out
depends on location too
ru uk?
canada
you might get your 80he before me but get a tracking number later
i would've thought that the na batch would've been closer
canada gets it from NL fulfillment
it’s harder and slower to get into canada from the US-CA border
hence canadian orders ship from the EU
What happened to the video they have promised to upload in the weekend?
Free the white zinc NA warehouse ppl 🙏🏻
White zinc v1? 
no
it just says that the intial magnetic flux is at the level when using a 1.2mm pcb
Thanks 🙏
when will wootility allow us to change the polling rate to say 2k hz or 4k hz?
Shakes magic 8-ball
Ask again soon
does anyone else have an issue with having to un plug and then plug the keyboard back in on windows start up in order for it to work
Using 8khz?
it's going to be long 🥲
Bro you are on batch 4
It is like that due to chinnese new year
this is real? 💀
yes 🥲
RIP
rip to 80he in stock dreams with how much later batch 3 is looking
That's batch 4
dolphin is batch 3 isn't it
Each time I hesitated to take a woothing because of delivery times 
But I will wait, I can't wait to receive it 🥲
did batch sizes drop a bit or was there some 80he buying spike? Surprised batch 3 is selling out already
this puts my impatience to shame. this is another level of wait time lol
yes lol 😂
Just get a plastic case and preorder a GT-80 case from KBDfans
You get to use the 80 HE out of the box sooner and get a Alu Case later on
28?
28
looking at batch updates it's specific sku like nordic iso that are on batch 4
i wonder if batch 3 just had much lower allocations for that or just the whole batch was smaller
Wooting would gain so many customers if they had bigger stock
They produce as much they can
Dang i want the 80he but dont have the money
wow the gateron jades are so overpriced on the wooting site
I'm not saying the opposite but it's really a shame
is that JIS or something
Look it is like that because demand is higher than stock
So if demand will be less there will be instock







