#🌟│wooting80he
1 messages · Page 160 of 1
fair enough lol
ow I ordered em half a year ago .. lemme check
You do NOT need to rotate switches, if you're using ours or Gateron's switches.
They have been designed to work with south facing and cherry keycaps.
appreciated, im havin hard times gettin my hands on a good lookin iso de one
is there a way to change the led bar colours for each profile, because the defalut yellow and red kinda clash with the color I want?
Thank you for the fast reply
I think this should do the trick
I got it
Yeah I saw that video too - I'm thinking of canceling the pre-order if the case can be marked that easily. Way too overpriced to be that fragile and easily marked.
is the na shipment still in customs purgatory? @buoyant solstice
this just changes what is indicates, I want it to keep showing what profile I'm using but the defalut 2nd profile has it light up in yellow and red and I cant find where I could change the colour of it
@buoyant solstice does switch keycap puller combo scratches white case as wire one?

No idea. Not my department. When there's news, it'll be in #📦│batch_updates
ok
the wire one doesn't tho
ah found it... maxgaming.gg
may i ask why its south facing leds
you gotta go edit the color of the profile itself, and then the LED profile indicator effect will display that
Hmm? Our keyboards use north facing LEDs
oh yeah i mean north lol
sorry
I still fail to see a question in there tbh 😄
Finally after 6 months 
I see thank you
arent south facing better for lightning?
gotta say the thocciness is so extremely nice
North facing LEDs because most shine through keycaps are designed with north LED in mind (there are very few, if not no south facing shine through keycaps), so it is for compatibility. This would however cause interference with Cherry style keycaps, but it seems like that won't be the case if you are using lekker switches for example
80he is the best sounding keyboard I ever had
okay
It comes off and isn’t the case being scratched but the keycap puller coating
If you’re still worried you can swap to black or raw zinc though, neither of them use a painted finish
It is infact the puller that is being marred, not the case
Isn't black painted too?
No.
Might have to watch the factory tour video again lol
We shipping modules now?
White is paint, because you cannot anodize white.
lol
Wait really?
Yepp, you can think of the case being sandpaper for the keycap puller
the profile indicator uses the color of the profile. if you edit the profile and change the color it should work better
It is like that yeah. You can still end up with a streak on the case none-the-less that shines on a certain angle because the surface is different where it got ''scratched''
Here:
and then click "Change colour"
Yes
This should probably be added to the LED bar section for easier access
Thanks for the help 👍
As people gonna get lost
yeah i brought it up internally
Custom images and gifs In profile pics was huge miss
yeah, it gets stored in the keyboard so it's not that easy to just let you use any image
but it would def be cool to have the valorant profile get the valorant icon for example
Hook up a 1TB NVME SSD, ez
im actually not sure how much we can fit there to be honest
Suggestion: make a keyboard which also is a NVME USB adapter lol (joking ofc)
wooting should make a Leverless controller for fighting games
there are no hall effect options out there

Think there is an actual keyboard that has this
If it was possible that actually will be interesting
this looks so good! glad i went ghost
Now I am on a mission to find that. I only know of a GPU that has this, but it's not quite the same
Is that the frost case? It's the one I ordered (already have the keycaps waiting for it).
Do you like it?
Not long waiting 🤩
NA?
Not sure what it was anymore. But I do believe I saw it sometime. Maybe a prototype something.
its the ghost case, I love it.. it has a subtle LED glow, but not to much
cant wait till night time to see how it looks then
#mechanicalkeyboard #touchscreen #kwumsyk3
The Kwumsy K3 is a 4-in-1 device, its a mechanical keyboard, a touch screen, a USB hub, and an M.2 SSD enclosure.
In this video I'll be unboxing this cool device, doing a demo showing the K3 in action, and doing a brief product review/summary.
Feel free to leave any comments or questions, and I'll do...
🔥
How much mbs of memory he keyboards have
analog movement is so cool
8mb?
Ooooh it looked pretty white on your photo! My bad!
Looks very nice!
wait i actually have some constructive feedback.
sell the different feet for the 80he seperately. i will deff lose the ones that im not using 10000%
Yoo
and i would feel more comfortable knowing there are replacements i can buy
Wow that's wild. Gonna watch that video when I am at home
yea I thought ghost is like black internal to, but its grey internal
Warranty claim: My dog ate my feet
Quick little feedback, the included keycap/switch puller is very exhausting 
frost is all white internal
The estimated date changed for earlier but it’s still packing
My module just got updated to “ready to pack”
Igor looked at your keyboard, that is his power
Put your heart and soul into it. I pulled two 80 boards clean of key caps and switches the other day.
Who is igor
warrentys seem like a headache id rather skip the hassle and just buy extra feet.
Who
Dont tell me you used the new puller 💀
!
EU
Had to get them all out to swap the springs.
god it’s beautiful 😍
Wooting plushie and candy when

rgb with white keycaps looks so good ngl
MAKE ITR DO SOUND
which weight are you switching to
Why do you swap the spring are they bad?
He likes heavy i think
usually for different weight
Small sound comparison to my Keychron k8, keyboard overall feels so good
im swapping mine to the 35g springs when i get my lekker v2s
I don’t understand why everyone change switches and springs and lub doesn’t the wooting come nice?

Small improvements 🙂
Preference
Mine is ready to pack for about a week now, so don't get your hopes too high!
how flexi is the board when you press down
the ssame reason why people change their settings and keybinds in games? preference
Nice thanks 👍 The Razer Soundbar 💀
it sounds so dgood
But the wooting don’t come whit the best ones?
Kampioen modules ready to pack!!! 
Yea... i was young and dumb 🥲
waow, wooting sounds better
It is preference mate
It's like... why does anyone make a modification to their car?
There is maybe a little flex but lets be honest, no one uses his hole weight to type on it 😄
there are 2 weight options 45g and 60g
you can buy springs for like 10 other weights
there is no "best" for preference
Improvements for gaming performance or just because u like?
Bc i want to stress my Neighbors
Dammm see through looks clean feeling like getting a black one was not the one now hahaha
The Zinc Alloy Case is heavy af... love it 
I changed them to L80 (and 100 for the other board), cause we currently don't sell these as premade switches.
Improvements to how you like it, no performance difference
You do modification on the car to be faster bro
We need L500 
Have some of you been able to compare jade vs lekkers?
Not always, rims don't make you faster
the wooting comes whit which one
60 or none
But are that better?
brother
They are better for MY preference.
its preference
So you are going to sell in future
I didn't say that.
I don’t know anything about switches bro I just want my wooting to be good man!
But if I see other people always changing it makes me feel worried if it’s not good
thats like saying which dog breed is better than another for a pet if you like your current dog then you like your current dog and your friend isnt buying a dog best on which is the best. its all about personal feel
https://youtu.be/G_8KvxfJjgA?si=dZlPAdWTrWAWgMYJ
The WS Dash in this comparison are Jades but just a different colour
안녕 It's Mikey here! Thank you so much to @Wooting for sending me the Lekker V2! The newly upgraded Lekker V2 which is to have much less wobble and better sound lets test it out and compare it to the Dash, Geonworks and the Lekker V1s!
Mods Done to my Wooting: Alumaze Case, PC Plate Switch, 2 Layer Tape Mod
Lekker V2: https://shorturl.at/oT6...
Has anyone tested the Linear 45?
tip, dont worry about it then
Gotta say wooting outdid themselves with the 80he and the lekker v2 .. this is so insanely good. I am in keyboard heaven
I want to know if I should change switches
you want to press down with more force or less force?
Only if you prefer another switch, otherwise stock is more than good
And they have a pack of switches linear 45 which one is better the 45 or the one that come whit wooting?
if you want to press down with more force get something heavy if you want to press down with less force get somethign lighter
its up to you
They are both the same, one is lighter.... only you can decide which is better for you
the 60g lekka v2 are very light in press resistance .. Id rate em as light as silent red I had before .. not sure I actually need 45g
I'm not gonna lie the camera doesnt do it justice, looks much nicer in person
I’m buying a keyboard because I feel I need to press to much on mine and mine is old ducky I want the best performance and the fastest one and I bought wooting I want the 0.1 mm and rapid trigger
coming from my 8yo mechanical keyboard, the 80HE feeling is insane
What is the point to buy a wooting for 0.1 mm actuation point if I’m going to put a heavy switch
To have more control over your push?
btw, i have ended up fixing my problem with space, wonder if the thread should be closed in community support
Just say you fixed it and how and unfollow the thread?
It's not a ticket system.
Gotta do that, not very much used
But if it’s lighter it’s faster for you to push it so it’s faster actuation point?
Hi is the white 80he so easy to get scratch
Lighter but less control as it requires less force to push

No.
The teeth on the included puller snapped 
ask someing that prefers a heavier switch bruv, im spring swapping to 35gs xD
I don’t understand what u say about control
There are less accidental activations from just resting your fingers on the keyboard
Like when u press u don’t need control
A lighter switch is more sensitive - you have less fine control over how far you push it down.
Dude, of course you need
The wooting comes whit which gs
i personally disagree i use 35g on my uwu for trackmania and at least for racing games it gives me better control for higher percentage steering angles
You can disagree all you want, but physics don't lie.
when i say "g" its grams like 35 grams
Ultimately it is personal preference. I prefer L80, others prefer 60 or lower.
Hippo review it
Damn ! I almost regret ordering jades with my 80he now 😅 lekkers v2 sounds great!!
Make me so scare
Maybe they print labels and give them in bulk to the curier. So they pack until one pallette is full and then give it to UPS in your case
Anyone that’s ordered the 80he module to UK had movement yet?
How do you rest your fingers you only have the fingers you play on the binds you play
i mean about the controll part not the sensitivity part
And my reply doesn't change.
I had to wait 2 days before the tracking was updated
Tory
if you can clean it off with some kinda shit like he did, its not scratches. its the keypullers shit rubbing off on the kb
But if you instead of putting 0.1 mm you put it 3.0mm
I get you, I’m waiting
Changing your actuation doesn't change how the switch feels to push down physically - just how far down before it goes ON
im in love with the keeb xD
Any way if your switches are too light, they spring back slower
In the end it is all personal preference, and this gives you less space for using the analog features I think
Ik wooting have how much
it arrived
Enjoy it

Bro has pbt keycaps
probably depends a lot on how hard you press your keys in general, and how "light" your fingers are, I know people with the same keyboard as mine that hammer it 😭 but 10g switches for example will be hard to control precisely for anyone XD
60 by default on the prebuilt keyboards
Guys now is the time to f5 the hub to see status updates. I have a good feeling about this one
I did a few hours ago, didnt change sadly
soon 
but you have less controll on a heavier switch as it gets closer to bottoming out. its harder to maintain a specific height/steering angel in trackmania like if i want to have a 96% steering angle its way easier to maintain that on a lighter switch than on a heavier switch.
i dont think your statement is universally applicable
Yepp, mine is still in production 👍
You're entitled to your opinion.
i got an email with a tracking link at 1am last night
"Queued for Fulfillment" 
i belevie this was already answered? the 80he comes with 60g switches
i mean it also literally says it in your order
Yes, unless you choose the 45g when you buy the module. Prebuilt always has 60g
The answer is always L60 or nothing. We don't sell any boards with the L45 switches (except for the UwU, which is its own thing - and it includes L60 switches as well loose)
I got it lets goooooooooooo
but you said you change to have more control and dont press it by mistake so if you change actuation point you dont miss clik
So until now the only one who complaint about the keyboard is hipyo, not even a single user in here that received it
well one user complained wbout this space bar and posted his issue in the support channel
A lot of hip fans complaining too
Which was fixed? 🙂
Well, that goed in the hipyo pack lol
nice. how was it?
got to say the hipyo hate from some people is a bit weird too XD
same to you 🤝
Go look? 😛
my 80he just came
Nice gz
does anyone know which couriers wooting uses?
hows the wrist rest feel
Depends on what the warehouse picks (for US)
tbh better then i thought it feels amazing 100x better then the one from steelseries
fkn smooth af
okay, im just wondering cz my uni accom can only take royal mail and dpd
glad i ordered one then
You're not US - You specifically picked a courier on checkout.
can someone get me the dimension for the home cluster btw :)
how is the built quality and the feel of the plastic?
2x2u

What? It's a standardized unit of measurement. 
i need it in terms of subway footlongs. how about that?
You want to make a badge in it?
yes :)
A footlong pre inflation or current day? African or European?
Not an Enthuasist who is picking some flaws they only see, if certain things are tried. For me, the build quality overall is insane, its tough, looks good, feels good & i think, thats all that matters. 😄
In my Opinion, Wooting just delivered with the 80he.
@worldly pebble I will ask for you
tyy
does anyone know how the analog input works on the 80he? whatever i do, i dont seem to get it to work.
can i change my order color without affecting my estimate delivery date?
You need to enable it in settings, you need to be on a profile with analog inputs, and you need to be playing a game that supports controller inputs.
it was black before and i wanted ghost
There's no guarantee of that, since you're literally asking us to provide a different product to you - and stock is finite within each batch.
Reach out and find out.
is changing the keycaps on my order an option btw? really liking the white keycaps
(I am in batch 2)
@worldly pebble help me remind on this after a week. Kevin, out industrial designer is on holiday now. So it might take a bit till I have the info.
after a week, gotcha
Write it down in your calendar and set a reminder on your phone
this in the wooting hub?
Yes
how :v
ok thank you. i created a analog profile now, but it still only uses my normal keyboard strokes as input. (im trying it inside of rocket league right now, so analog input is supported)
Scroll down a bit and there should be this
Did you enable analog in settings?
The first thing I told you to 😄
Received mine today and think I shouldn’t have gotten white :‘)
Purple/Black 60HE is much more sexy
i think that might be module only? i dont see it :p
Can anyone try f the 80HE also works for preaparing breakfast? (https://www.youtube.com/shorts/N8uFOYVK43g)
Missing a knife to spread your peanut butter on your bread? No worries when you own a Wooting 60HE
➤ Follow our socials!
🧑🤝🧑 Discord https://wooting.io/discord
🐤 Twitter https://www.twitter.com/wootingkb
📸 Instagram https://www.instagram.com/wootingkb
🎥 Twitch https://www.twitch.tv/wooting_live
📘 Facebook https://facebook.com/wootingkb
➤ Sup...
Then it is peobably becuase I ordered the ISO version and the keycaps come spereately
you mean the enable gamepad option? i dont see any option that is directly related to enabling analog input?
It was moved to here in V5 Wootility. Otherwise it's in the SETTINGS menu in the bottom left.
For your order they are preinstalled
Do we think the US orders maybe a little early since the boat arrived and such? Or still same delivery timeline?
yea i enabled the gamepad option
Time to extend my 60%
Just got mine, the keyboard baggage just reeks of premium quality 
Damn, gotta make a follow-up 😛
Only time will tell.
becoming a true 77.5%
Which is also why some people here have extra PBT keycap boxes and some don't
iso keycaps doesnt come pre installed
Yeah I already said that earlier, was just adding to that
i sent an email about wanting to change my switches to the l60 on my 80he order, they responded saying it may take over a week to process, and it would be faster for me to re order. The problem is, I ordered my stuff at the time a deal was happening, so what costed me $245 would cost me like $290 now. Should I reorder or just wait? I have the NA-Whale batch, shipping in Late January, do you think my delivery time would be pushed back?
wait
Your delivery time would not be pushed back as I think this batch is not in production yet
what deal? wooting doesn't have any sales running recently
you mean just the module bundle sale?
it was like some percentage off on the case and some other stuff,
that's always there
i dont recommend refund because u dont actually get all the money back
go to checkout and check the price there
You get back exacty what we received after any currency conversion and bank fees on your end. We cannot refund what we did not receive.
any idea on what im missing? i enabled the gamepad option, i am using a analog profile and i bound analog inputs to wasd and arrow keys
yeah exactly because of all the fees 
Those are fees on your end ultimately.
i just checked, it may not show the discounts initially but when you click to go to the checkout it adds the discounts back in
yeah i saw
in that case i'll reorder
i doubt my delivery date will change
it will be like 30$ for $300 refund
Your country has some steep ass fees.
wait actually
yeah about 20-30$ not exact
i live in US, is it $20-$30 here?
It's 0.
some conversion and transaction fee i supposed it adds up to about 4% for my order
⌨️ Get it here: https://wooting.io/configurator/wooting-80he?model=ANSI+/+PCR+Plastic+/+Ghost&lang=United+States&keycaps=none&quantity=1
Unboxing video of the pre-assembled Wooting 80HE PCR ABS Ghost.
This video shows all the items you will get out of the box.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitt...
That sure is a video link.
Making the video's public now so people can look them up.
But I won't publish this to anyone's feed to avoid spam.
Hey Mark! Just wanted to give an update for this, apparently I cannot, when I requested this I got the answer that by now it's submitted to fulfillment center so cannot make changes to the order. So seems like the retroactive bit can't happen, after all
Unless Anders has conflicting info about it in their reply
Que?
white wrist rest probably is going to get durtyyyyy
I asked if I could retroactively add an affiliate link to order that's about to arrive in a few days, kind of jokingly
Mark said yes you can retroactively add it without re-ordering, so I sent an email about it
Just got a support reply from you that "Unfortunately, your order has already been submitted to our fulfillment center automatically." and that no changes can be made anymore
he keeps a very clean wrist. If anything the white wrist rest will dirty his super clean wrist
I am not aware of us being able to retroactively add affiliate codes.
no changes can be made after confirming iirc
Yea I didn't assume either but look at where I linked to in reply, Mark said I can when I explicitly asked for it
So maybe he didn't know so that's why I wanted to let him know
shrug
mark is the coder right? 
I don't mind it either way
Thank you either way!
Did anyone already use the analog feature on the 80he?
I mean... they aren't any different to our other keyboards.
Stupid question, but is it possible to exchange the keyboard for a sum (black instead of white), or should I give up and live with my decision?
I’m debating swapping my black caps with white seeing all these white stuff 😂
U got white and want black
Basically, yes
well there is a 30days return...
it sounds so good coming from a 6 year old razer keyboard 
been using it for years on the two HE and 60HE
True, guess I’ll sleep over it and decide tomorrow
if money isnt a issue, u can just buy another case
and maybe return just the case idk
still waiting for arival at the warehouses. i musk keep a close eye on the developments.
What did you configure for it to work? Cause for me it just doesnt work :(
depends on the game
Time to chase the delivery guy
Im bout to hop on my bobbycar and do so
i was trying rocket league for now, because that was the first game that came to my mind having analog input
for racing games I use this setup since the shoulder triggers are usually accelerate and reverse on controllers
that's what the default racing profiles has yeah
yeah thats what i configured as well
you also need to remove any regular keyboard binds like wasd in the game or they will conflict with the controller input
Or just disable the overlap
either that or disable the regular key inputs on those you have gamepad binds on in wootility, but I don't like having to do that
⌨️ Get it here: https://wooting.io/product/wooting-80he-zinc-alloy-case?Color=Raw
Unboxing video of the Wooting 80HE Zinc Alloy RAW case. The case is available to purchase seperate, but can also be combined with the 80HE module. It isn't available as a pre-assembled kit.
This video shows all the items you will get out of the box.
✨ Follow our s...
This is what we wanna see🫡
i tried enabling gamepad mapping override, but then just nothing happens when pressing the buttons to drive and steer
sander's hand? 
why cant we get white case plastic?
some issue with making white pcr iirc
Makes me wonder if I should upgrade from my Ghost
black doest look good at all 
ayy same
its the most voted color
frost exists? and that could be harder to make proper clean? (I have no clue about recycled plastic manufacture)
star citizen flight setup 
frost isnt a prebuilt option 😦
just makes me sad, that analog wont work for me
yeah i receall there was some issue with getting white on pcr to look nice enough
have you checked so the drivers are working properly
how do i check that
windows can have issues with them sometimes
Can i get white zink and return my prebuild black plastic case?

White was downvoted in favour for ghost and frost.
Maybe later.
my xbox drivers should be working, since my controller has no problems at all
if you got them both plugged in at once they could be conflicting
No. You'd have to return the entire keyboard.
oh so it was just not popular enough 
nah, my xbox one isnt active right now
i tried it in between testing, since i was worried
tbh I would downvote it too but it is a common "boring choice" like black
How long does it take after you order for the order to appear in your "orders" section of your account?
does the controller inputs work in the wootility gamepad tester?
Yeah mark sometimes adds it after the fact
well
so happy for the batch 1 team, love batch 2 team
Meanwhile... Group 5 guys
but another guy on this server wrote that the gamepad tester doesnt work, so i just trusted him
try going into wootility settings and click no gamepad, let the keyboard reboot, then click xbox controller and let it reboot again
sometimes that helps to get the tester working
Man I really like how the white case turned out lol
How do you see the batch number? Mine just says "EU-Brug"? They ran out of letters? 
black plastic case look gray 🤮
youre probably using wootility v4 right?
We've never used letters.
Brug - IS your batch.
yep, can't say whether some bug has been introduced in v5
i mean brug are letters 
It's a word.
yeah thats the problem. my keyboard is only able to connect to v5
i tried to connect to v4, but it wont let me
You don't use V4 for the 80HE.
fair 
just received mine. its wobbling🥲
Wait do you get your warranty voided if u were to change color of the case urself 
Is there any significance to the choice of word that was used for each batch?
Dutch is just that
znyc?
Loosen some of the screws maybe

or is your table drunk?
Could be that one screw is overtightened
right. but i was trying a lot of things for the analog stuff to work
None except that we spin Calder around on a chair, and the first thing he points at is the next batch.
Same word in English, Dutch and Mandarin? for each warehouse.
Brug = Bridge, in English
alloy zinc, tried different surfaces and rubber feet, always the same wobble
Did you stay a different table?
Batch names are translated for different regions
Also make sure the back feet are pushed in fully.
yup
wouldnt that mean the whole keyboard is bent
as in painting it?
Out of curiosity - why not numeric values though?

i cant see it with eyes. but rubber feet seem to be the same size. probably whole case bent i guess
Counterpoint - Why?
Did you put it right
Ye
Dang Hypio was brutal on his review of the 80HE
wow that's new. have you contacted them yet?
COnserding the last batch names, he has a very interesting view from his chair
yes you void ur warrenty for just the case
nah, just received it
Because that makes counting possible to know where you are compared to others. Brug does not tell me if I am close to the top or bottom of the list
yeah, even wobbles without the front rubber feet. back ones are not removeable
how would you know your queue if ur eu-8328273628
Remove top case and put it back
Neither would a number, because we have batches for more than jut a keyboard.
The zinc white keyboard a lot of people might not be happy with how easily it scratches
could have been during shipping. i'm sure they'll replace it for you.
Which it doesn't*
Well, you got the batch-updates channel and https://wooting.io/batch-updates for that... so....
An overview of all batch related news.
how should that help?
So no one here has tested the gamepad feature on the 80he yet im guessing?
Hipyo showed it did though
BEcause maybe there is some screw overtightened
check pin
it could be cliped in wrong causing it to bend around the clip
this is starting to be annoying to see constantly brought up. Its not True and has been stated several times over
Maybe read the comments debunking most of that.
Don't have Overwatch installed rn
Nope
I would create a support ticker about it either here on the discord or a mail, the latter will probably take longer for a response though
maybe. i will contact support first and see what they will say
latest pin of thockfather
@dapper canopy when I get my 80he i will tell you
you mean create a thread on the game_support channel?
when is that?
yeah or #1019755933959733258
He did another video?
Next week propably
He scratching wasn’t done inside the case though, he should have posted the video on the exterior in front and back
im guessing its the same thing being brought up
its the same...

Oh ok
@buoyant solstice Do have to return the WHOLE KEYBOARD??
Then there shouldn’t be a problem to record it again to calm down the community. Perhaps a faulty coating
what hipyo showed isnt scratches but mark left by the keycaps puller which can be easily wiped off... the case itself is fine
I think youre getting worked up about nothing.
You have to return a whole product. If you ordered a prebuilt keyboard, you can't just return the case.
Taking in count it would be uselesswithout the case because the daughterboard is attached to it...
80he zinc is like sand paper
I’m a happy wooting buyer, I've already ordered my product. I think it’s for the best interest for the community that it is showcased
To prove the reviewer wrong, following the same example they did
not that attitude. A soldering and a random usb cable will do the job just "fine".
And it has been showcased my dude, just not to what you want.
watch squashy boy, his case is an example of a real defect 
We did.
cam tried to scratch the white zinc case with a wire keycap puller. see the most recent pin in this channel for the video
then they wouldn't accept the case in case of return
They have, they just dont like the video and are wanting a new one recorded lol
Sir I am only here to offer solution, good solution was not part of my job description!
Ye thats real detect
?
They have seen the video in pinned, but are saying its not good enough cause it doesnt follow what the reviewer did, and they want a new one recorded is what I am saying.
Which is silly because it doesnt matter where its demo'd it still showcases the thing in question
Again - We've already done the same tests as Hip.
And to reiterate - If a customer receives a keyboard with a paint finish issue, we have a solid warranty system in place for that.
Yeah I know, and I agree its more than enough. I was clarifying what Deegs was saying about the video
And we have 4 years to find that issue!
See guys, that's why Raw is the superior choice
If we are 1 day into this dilemma and are already tired of explaining it, this will be a nonstop concern for the entirety of the product
Until that reviewer revises it
Asked internally for help. Apparently the Xbox driver is currently having some issues, which the team is looking into. If you change to Classic mode gamepad (and the game supports it), you should have functional analog movement in games that support it. 🙂
My wooting look so fake 
Why
I see so many people getting their zinc alloy
I think youre the only one who hasnt accepted the example proving it wrong thats been given to us by wooting staff
Really makes me wonder how many of those were sold vs plastic
I accept it, but many people will come around and ask the same thing time and time again
Any idea why I can't create any active profiles for the 80he? every new profile goes to inactive, how do I get it to the onboard tab?
drag
It dosent have stoping intruders feature?
Have you ordered the 80HE in Zink white?
I don’t plan on ever buying the zinc cover but gotta realize this will be an ongoing thing
You drag them to active 🙂
Nosir
yes
Drag from inactive to active.
Dragging works on the https://v5.wootility.io/ ? Doesn't for me
ohhhhhhhhh
Grab here
jesus

Then lets the customer service deal with the problem. I got one on order and I am sitting Calm in my boat waiting to scratch mine.
That feature is only for 80zinc
It's been tested by 3 different people in different ways. These marks wipe off fairly easily and are superficial. However, with any painted product, you can scratch it if you try hard enough. If you are really concerned, get black or RAW
https://i.imgur.com/mvfIeaJ.png i was grabbing from here 😭
Ah yeah the quick menu. I'm glad I'm not the only one who thought that was possible. It is not - right now. But our UI/UX team are aware of it being an expectation 🙂

PauseChamp

You are sending nerd emoji on duck? You are nerd 
thats very specific what
we're all nerds

where Pos1? Am i blind?
Fair enough, I mean if the staff/community has done their share of addressing it we should be great. I guess Hipyo threw wooting a punch to the gut
Pos1? Neer heard of that key.
yea one thing I like with DHL is they sent a push notification when it's about to be here (not estimated but when van is close)
DPD I think is even better where you can just live GPS track the van all day for some reason
@bright jewel you are sending all cases to calsock to qc if they are Miku enough?
yea my friends said "this aint no way is wooting is gray from temu" he doesnt believe 😂
It's HOME apparently in some environments like German
To set cursor to beginning of row
totally
Huh
Silly germans
your keycaps did!
Thank you. Somehow even switching to the classic controller doesnt work for me 💀
You have button to control your kebab?
wat
I will have cherry profile keycaps on my 80HE. What will its height be then?
Rollen
home is working, ty
Or he got a bad unit. It happens
I guess whoever did the German localization didn't notice Pos 1 / home
Sounds like calsock thing
@glacial wedge If you think the Zink white is a problem. Just you wait intil you hear about the RAW case patina. The color shifting will be crazy depending on how you expose your keybord to the element.
Shipped yesterday from Netherlands and only one day to Toronto
that would be "home"
yea i got it now! Silly germans call Hom -> Pos1, ty!
Wtf
My parcel has been in Netherlands for 3 days, need someone to carefully put it on the damn plane to the UK pls
That's the best part. Love case patina. Like a nice leather couch
or "Hom"
why didnt they just go for cnc anodized aluminium
I think people will probably like that feature
Got lucky with a plane I suppose. It IS only a plane trip away after all.
Because it is crazy expensive.
Also... you can't anodize with white.
arent the tofu redux cases aluminium?
If your worried make case out of titanium it would be save from all issues
@buoyant solstice Will the daughterboards be sold separately for people who wants to make their own cases?
Yeah a number of keys are translated on German keyboard. But on a lot of keyboards they don't have the translated name but symbols instead. Writing the name on the key seems to be more a US ANSI thing
I’m really curious what optimumtech is going to say now
Not sure yet. Possibly?
They use e coat
they also don't make tens of thousands of them per batch
The molecules. They are too THICC to work with ano
zinc alloy is cheaper and more conducive to mass-manufacturing on account of the diecasted nature
For alu cases u use acid to make colour or electricity
this is my first wooting keyboard just got my 80he im wondering if i should plug in into usb-c or use the adapter to usb b? my pc only has one usb c port that im using for a third monitor < 3 do i get the full use with the adaptor
whicever you want, no difference
White too bigggg
wish I had a rollen key 😂
awesome just wanted to make sure i dont loose on the 8k polling @toxic zephyr tysm
ty for info
never used it, its just there for comfort
Is it possible to upgrade order from PCR plastic to zinc alloy or do i need to delete my order and start over (and can I even do that?)
Support pages were all about the 60
adapters just change the shape of things, they are not really a part that do anything in regards to signals or performance
Got RAW case for patina, I think it's neat
latency seems to be 0.1-0.2
I really wonder what it'll feel like to play on 80he... Been using cherry mx brown for 2.5 year now

Oh wow pretty good still
U doxxed your self
Damn
0.1 to 0.2 what? measured how?
Oops
Bro put the tracking number in screenshot
Now some1 can cencel ur delivery 💀
Like that plane ticket lady
Pray for your 80he
i just watch review videos 
I have a dock i use from my work laptop and my desktop n swap in between, hopefully it doesn’t take a hit from it
7 months of waiting ends today boys, my 80he will be here in a few hours 
No reviewers tested defense capabilities of zinc 80he and taste of switches.
Horrible review
well, took the case apart, still wobbling, i guess the bottom plate is slightly bent. i will contact support
I’m surprised from the two reviewers I've seen they completely ignored the light color bar
It seemed to be a big point for wooting on their promotional video
damn, good luck mate
It won't change the world - And it isn't fully functional atm. due to the lack of the background service option for V5.
We can't access audio, RAM usage and app specific data.
yet
The bar just seems like a cool feature with some sort of practical uses
ram usage would be cool
But I can’t see it being a super big game changer
You are pretty sure the desk is straight right. If you put it on the floor it would be same thing?
I'm honestly quite disappointed in it at this moment, can barely do anything with it and the static lighting options are extremely basic and lacking
Ahh I see interesting insight thank you
i'd probably just end up using it to show like socd on/off or profiles and stuff
I love it... but there will be people who see it as a problem. Just like you pointed out with the white Zink
How can you be so sure the floor is straight 🧐
I can't heh. But atleast you'd have multiple surfaces to test 😛
a better test is to try it in 90° angles on the same desk
Think you will have a discord hook in? Would love to have the light bar go red when I mute my mic.
tried different desks, floor, i put it on a white ikea shelf for taking the video. its for sure the case and not the surface
if the desk is warped then you'd know
Customer support it is yeah
I think it's definitely POSSIBLE. I am not a coder, and I don't know how open Discord's APIs are to being read/written to by external apps.
I have the exact same issue. If I press down on bottom left corner the keyboard wobbles. I already wrote the support. Fingers crossed.
I think personally from the looks of it. There will be a v2 in the near future which imo is good as we get to enjoy the 80% form factor for now
Some use the cartboard IKEA desks, and have their PC put on top. So sometimes those sag over some time.
i know, what I said was a two parter and I guess you missed the first part ahah
I did some stuff on this, discord uses system debug output to do calls of what's going on, this is how other software like logitech can show e.g. lights from notifications and such
So luckily it's pretty trivial, just read a log that's available to every app system wide
Oh man this, my first Ikea desk warped cause I put my PC on top
I drilled a bunch of holes in a recent Ikea cabinet I bought and now it’s Gucci and hidden away
I'll pass it on to the team.
ayooo
Hmmm, cool idea. Although I think it would be esier with moded Disc to read out the icon value, would be a lot esier compared to discord api(warning: modified discord is againtst tos)
well, at least im not the only unlucky one i guess🥲
wooting never released products that weren't ready until now so honestly just not impressed
Wait a few hours
It’s coming
look at the price
oh yeah, that also seems like a good way, did not think of that lol
HELL nah
Fair enough, yeah I do agree on that point. I guess I’ll see it for myself in… 2 more months 
Honestly, why we didn't shoot too much about the lightbar as it was still work in progress. But I feel ya. You don't buy products on promises on what could potentially come.
Wooo
All the things that have more advanced lighting come with terrible software like this Razor thing or Asus ROG stuff
Love the keycaps!
We will update it and bring cool features to it. But it takes a bit more time then anticipated.
Oehhh. Lovely combo!
guys i have a quiestion about the 80he ghost
anyone have a pic in dark room ?
anyone know how long it usually take to order something small like cable and switches?(not 80he)
Doesn't it say at checkout?
Did you also notice this:
Also the rubber feet at the bottom have a different feel to it.
All feet feel smooth except the one on the bottom right. This one feels like it has a bit of texture to it.
no
yeah I just expected just simple basic control like with any LED on the boards already but even that is not a thing for some reason
does the RGPs takes ofer the whole case in a dark room
I think you can only do so much with a light indicator, but probably overcome with some nice keybindings will ease the pain of a knob or a volume rocker
no idea then brother
love carmine cloud 
can you send a screenshot? it should show the estimate on checkout
In EUrope
just a quickie, can it be eddited with open RGB?
that's what I thought
no clue
Will make sure to give updates on YouTube when progress has been made! ^^
Wooting is known for their top tier industry leading software for their keyboards so that’ll be exciting to see how it develops
nvm, sorry for bothering mate
i think from china to europ around two weeks
does the RGPs leak to the whole case in a dark room ??
I'm sure Wooting has cables and such in stock.... No idea though, you'd have to ask staff. Or look for the estimate on checkout again
i mean it's a clear case
Hi Sander, can you control the led bar and all other LEDs with open rgb? if not, is that planned to work in future?
Wrist rest feels really nice
no, i can perceive a difference in the rubber feet.
im buying the product and put in hold to test and see 
I'm not too in-depth with that. @hushed sinew help pls 😛
just make sure you check on estimated delivery when ur choosing your courier.
i know but is it a little bit leak or my keyboard will become a billboard in the dark 😂
not rn, will be possible at some point? i might even add it myself, i contributed to openrgb before :p
oh yea is 4-24 oct wTAAAT 
Well there u go
That would be awesome, plugins for LEDs would be so much esier lol
1st kick due to input automation 👀 oopsie
openRGB has to be open at all times though for it to work right? I'd much rather have wootility have basic controls for the LED bar
should i check if openRGB works
Wait a minute I just realized wooting can make a touch sensitive light bar and we’d be able to swap it with the current one right?
For any kind of animation? Yes.
yeah, adding more possibilities is always nice though

No, no we cannot.
we would never not have it work without background software.
Aw man
that sentence is a train wreck, but it will always work standalone is what i meant
It can run minimised in background. since my rgb on walls and table and pc are basically controlled trough it, I dont really mind. it allowes for interactive RGB for movies and on screen info
you should try out artemis :)))
no I'm not talking about fancy features that integrate with stuff, I'm just talking about being able to set a color on each of the 10 leds
The LED "bar" is LEDs on the PCB with a pillar that shifts the light up to the top. There's nothing to "touch"
guyes does the 80HE ghost become a rgb billboard in dark room ??
anyone got one @_@
Not really?
yeah we realise it's a mess rn
👀
uuuuuuuu
d oyou got one to show me plz ?
cus i wanna order it rn
well what do you expect, it's a clear case so leds will shine through
Okay that would be cool. Like use it to control volume.
how is it with controling ESPs trough API and stuff?
If wooting throws some api/library to control it, the creativity of the community will find it's way.
- Minecraft mod to show xp progress bar in keyboard
- (probably not anticheat-friendly) show amount of enemies alive in games like CS2
- microphone pickup volume (similar to the bar inside Discord settings -> Voice & Video) -> can be useful for streamers
- Sound volume
- Chrome/Torrent download progress bar
- Timers
- Cooldown progress for different games
- CPU/Ram percentage usage
- Network usage
I'm pretty sure the community would find even more uses.
if you don't want that then maybe don't order a translucent case
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE https://wooting.io/wooting-80he
60HE https://wooting.io/wooting-60he
Two HE https://w...
yeah i know but if it was gonna shine a little bit its okey but if a lot i wann know
i wrote a bunch of these already for open source programs before i joined wooting :)
You’re 100% correct wow, I didn’t think of that. That’s be super cool add ons
THANKS
purple pcr case wen
!!
pls sander
This is on 100% brightness also btw.
looks clean asf
looks good
Maybe yes... maybe no... Who knows 😛
no spiral effect smh my head
I’m excited to have proper RGB back. My Keychron has crappy lighting.
HE SAID MAYBE
50% brightness will be perfict
It is just a showcase 😭
@midnight iron how do I start church of the purple pcr case
I just use static orange on my current board lol
Creating that false hope 😂
the minecraft one would be SOOO sick
you are impresive man
Then hopefully you'll take care of them on the wooting side too 😀
And even better, give us an SDK. I would love to be able to control it myself
dude minecraft is a pain in the ass. i maintained like 4 versions of a mod that did this before i gave up
i also wrote a rocket league mod for this ONCE that never broke. probably still works
a pain in what way? constant updates breaking it or what?
morning wootgang
thanks for showing me artemis, ill look in to it and if i like it, ill transfer some of my plugins to it
have to write a bunch of new code every new mc version yeah
You must lay the ground work through active recruitment to grow your flock
artemis is a bit abandoned now since the lead dev and I barely have time to work on it sadly
ooh yeah a boost meter would be cool too, unfortunate that its such a pain to get working properly
We be getting so many cults here lmao
wack
jed is responsible for a least 3
80he moist edition when?

boost meter is nice yeah, also had like goal effects and stuff
Nah, you are fine mate, still seems to be lot more flexible than open rgb and i like the ui
We prefer to be known as groups of enlightened individuals who praise the great leader Geon
glory to geon and all that he touches
You can just pour water on your keyboard? 😉
maybe i should have gotten a ghost ngl
I want certain light to change color depending on how far I push on a certain key.
👀
it looks insane
we have a bunch of those features planned
like LED bar 1 set to space bar and it'll change color gradually the further that I press it
is there any plans on allowing some sort of community made effects for the LED bar? like a community workshop of sorts?
Sander further increasing sales 
I really love that blue section
Community will be able to control RGB themselves yes.
If you add that with what I thought in mind, it'll make the first keyboard that I've ever seen doing that.
community made something sure, i dunno about workshop
oooh, cant wait to see what some people cook up
ah
https://github.com/WootingKb/wooting-rgb-sdk
I still have to wait 2 months for my keyboard. Hopefully the 80HE (including it's ledbar) will be supported by this 😄
there may or may not be a branch with 80he support
oh yes there is, nice
no LED bar yet though iirc
Dumb question but can you do full white color on the rgb?
yes
You -can- but it is rarely perfectly white.
RGB LEDs being what they are and all that. One colour will usually be slightly more dominant, so you have to tweak it a bit.
also dumb question with white agb does my whole keyboard turn white aswell?

yeah teh case too
it dyes it
hru all
rgb is visible through the pcr abs cases, not through zinc
if this is what you're referring to
ong this is magic. This case was a ghost case not five seconds ago
silly enter key
but how do you turn it black
🙂
woow wwwwwwwwww
turn off the leds???
damn my order is now ready to pack
thats honesly what ill be waiting for
Does someone have an idea how to damp the sound of the spacebar? Every keystroke sounds like heaven but hearing the spacebar gives me a stroke…
in america, you scratch zinc!
in mother russia, zinc scratches you!
I catched them all
put some foam in it
heard that sticking some kind of foam works. (im not a keyboard person, I just read it somewhere)
Ill give it a go thank you guys!
ill cry now didnt order zink alloy 
Me when no zink 😔
Does someone have black case and white keycaps on their 80he with the RGB on? 
my black zinc coming in tmr
black plastic is not black 
ive seen people post that combo today. i dont remember rgb. look for links/images in this channel with search
I was thinking of the plastic, bit then i would be mad that i did not get the zinc so i just bought it in zinc and now i regret not getting it separatly and buying the raw case lol
Ye I’ve been doing that only so far it’s white case and black keycaps 
maybe it was actually that way around lol
is it possible to turn off the rgb and leave the light bar on?
Yes.
nicee good to know
is the light rgb touch id?
hmm... I heard review saying white zinc scratches easily is this true
i orderd the ghost version with the white keycaps. should i change the keycaps to black?
you can only control the lightbar via software, no touch sensitivity
hipyo effect going crazy
no not really. lemme link some of the vids some people posted
idk do yo uwant to change em to black? 
does the zinc version have brass threads inside the chassis?
The threading is part of the case itself as far as I can tell.
yeah that's where I saw it
thank you
i saw on PCR ABS but not on zinc
Im not sure if the white matches with the gost version
How do i know what switches are compatible with wooting 80he
nvm i see it better now
Summon the Wootxodia
if the switches are also he
hello 👋

What is an he switch (sorry I’m new to keyboard stuff)
over lubing lekker will cause any problem to them switch? coz I love creemyy sound switches
I saw Calder use white keycaps on his ghost case
hall effect. it uses HE sensor and magnts on the switch to determine the distance
hall effect. it means they work with magnet. if you look for "best he switches" or anythin on youtube you will find good switches that work with it
what happened
wha...? nothing's appearing. did hipyo dunked his case into salt water before making that video?

Thank you both
you can scratch if u try really really hard
We call this a joke.
#🌟│wooting80he message
It helps to read the conversation 😄
no its more of that the keycap puller leaves a mark that is easy to get rid of with cloth.
or his could be a defective case, covered by warrenty
i didn't have context
so it's keycap puller? LOL
Unlikely. His case isn't special.
yes
no not really. the keycap puller can leave that kind of mark, but like i said, it is pretty easy to clean off
thank god i am here to confirm, other two I watched didn't mention any of these, but i think they mostly reviewed with plastic one
he did post additional proof
assuming he is not lying
@thick lichen will you upload a frost version of this video? https://www.youtube.com/watch?v=7sxeyXXjQ1w
⌨️ Get it here: https://wooting.io/configurator/wooting-80he?model=ANSI+/+PCR+Plastic+/+Ghost&lang=United+States&keycaps=none&quantity=1
Unboxing video of the pre-assembled Wooting 80HE PCR ABS Ghost.
This video shows all the items you will get out of the box.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitt...
did he? i missed that. may i get a link so i dont have to search for it lol
ofc lmao
Also could we see it lit up?
theres not a prebuilt frost i think
https://youtu.be/1WAJ1msUcpI you mean this? 👀
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE https://wooting.io/wooting-80he
60HE https://wooting.io/wooting-60he
Two HE https://w...
I was literally just working on it haha
Boss move Sander 😄

ty ty
mine's still weeks away nooo
just checked - mine will arrive tomorrow - faster than I expected
to be fair, it seems that he really tried to leave a mark. Like if you dont try to, I think there is no way you can leave a mark like that. I might be wrong tho. but from my experience, even with bad white paint on metal, you have to push somehow hard to do that
he did
video idea for a short: show all the cases lit up one by one. thoughts?
So can we get a video from Wooting debunking how supposedly easy it is to scratch the white zinc alloy case?
Good one, was thinking about doing that sometime. I did make a video with that on the Ghost case. But not for the frost.
Check the pinned msgs
But then again, I feel like in the coming weeks so many reviews will probably showcase this.
true
there is few viedos of trying the keypuller and how easy it is to wipe and trying to scratch it with a mouse whitch did no damage
can someone link the order status? where it shows deliver date estimate
I will focus on trying to mod the 80HE a bit more soon, and get more sound tests with different switches
imo its always nice seeing it from the official channels
ya but it feels petty 
i mean so is hipyo but yk
Cool thank you, just saw it. Been worried about it since I saw the video, now just have to wait till mid-Nov ...
They need to pin that 
Just make sure to be careful plugging in the USB-C cable. The plug is made of metal, so if you try it blindly you can get marks quickly around the port.
I don't care much myself, as I never see the back anyway
And it helps I didn't need to pay for it heh.
i like it rough
could you add the vid with the mouse to pinned? some people will ask since thats what hypio also mentioned
deff good for tiktok and twitter as well :)


Done
thank you, sorry to bother
youre good dont worry
Thank you!
will there be an unboxing video of the base black 80he?
that poor mouse probably lost some plastic doing that
Its so funny that Thockfather can pin stuff, but I can't even. 😭
Lmao
lol
LOL
Unless I am too much of a boomer and don't understand how to lol
Gonna head back over to Hipyo's video and tell him exactly what I think of him. Was bloody worried about the zinc alloy case pre-order all morning.. what a bender

bruddah its not worth ur time
want a guide lol?
/j
Right click a message and pick pin
I mean - he is the Thockfather.... you just work here Sander ❤️
HELP?
lol
hah
I wonder how many dislikes he must have in the video
fixed
Hipyo is a good guy and is entitled to his opinion. Maybe he got a bad case. QC issues can happen. If you don't agree with the review, that's fine, but don't berate the guy.

Skill issue

something

poggers

niceeee
quality
its gone 
Now take away his power so that he feels even worse after having a taste
Ayo 😭
Honestly this deserves a pin, he’s definitely not one of my favourite YouTubers but it’s a bloody witch-hunt in here
I will invoice Sander for every message he pins
Else I will sabotage the Geon RAW HE's getting on the store okay

Only by the grace of Geon can power be restored
Idk, it seems pretty peacful compared to some other drama I was in lol
Yeah, it can be a bit hostile. Tried to get it chilled down last night as well lol
If only people read pinned messages to begin with.
Igor would never allow sabotage to happen in wooting
petition for igor emote
We have been trying to keep the conversation about the review and not the reviewer. Boards aren't just sent to blind fanbois and people forget that. Reviews are opinions and not all of them will be the same.




