Want a recommendation of a quality gunstock?
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Combat Waffle Studios / Ceps
1 messages · Page 102 of 1
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Turn off hands tracking in Quest menu
can you use angled grip with gunstocks?
Is this gun stock good
@mental lance you seem like you know a lot
...
God dam
At least with Quest 3S it won't be losing tracking much.
If you are able to align it straight with calibration, it's good for sniping for sure. Reloading might be not so fast and easy but it is what it is. Keep your controllers on their wrist laces for not to drop them.
It take that long
Nah I only use assault rifles
Thanks for the support! To get the best alignment, use the "Gunstock calibration" tool in Showdown game settings.
I like it it a bit not comfy but I’m going to fix that
Yea, go and use it👍
Hey guys merry Christmas! I made a new Gunstock that braces against the wrist to make looting and gunfights less of a hassle. it's called "Pulsar Quickbrace" and it's built off of my GunFace platform so it's modular and interchangeable. 25% off until new years, links in my bio please check it out if you are looking for an affordable budget gunstock!
I just truly was looking for words for not to disappoint you much on Christmas, brother😁 The truth is that Chinese never use their own stocks themselves in games. So that's your job now to adopt it to real using.
Ok
i regret buying cgripvr from dudes etsy now
taking way too long and he doesnt even have express shipping for free on his
Yo I have all the calibrations for my gunstock but I can’t use angled grips because they change the gun sideways a bit. Is there anything I can do to fix it?
does anyone have any recommendations on gun stock ive just started today thanks
does anyone have any recommendations on gun stocks around 30 to 50 bucks
any advice when it comes to magnets vs non magnet?
Does anyone know if I can use my quest 2 stock for quest 3s???
this is the gun stock https://a.co/d/1WBdi4R
@thick hatch is there a way to tighten the knuckle grips?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Personally... I prefer magnetic.
Do you sell your stocks on Amazon
Or anything similar
No, Only Etsy or Direct.
link in profile or in gunstock chat thread above
Should I use the gun calibration with my gunstock?
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Is the Magni stock + decent for ghost of tabor
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
I didn’t mean the ones you sold I ment the ones that came on the gunstock, they don’t have the same straps
The adjustment is the same. I just have changed from a 3D printed TPU version to a Pleather/Rubber manufactured version that is more comfortable.
The bungee cord portion and connections are all the same. 😉
i got cvripv coming shud i stick to it or get magtube pro next year
cGrip is a great stock from what I hear and see
ty mrtass i also pointed some1 ur way few days ago cause they wwanted a pink stock xD
Appreciate it 😉
hey mrtass i need ask fewcquestions have u tried cgripvr before
aka tested it out
I have not.
ohok cause someone said u cant move distance between hands when using it
that worried me abit
That is correct. It is a fixed solid print stock.
Usually that isn't a huge issue... when the distance is right it will work with most guns in most game... the range is usually pretty forgiving.
:/ should i have regrets buying it >.<
It’s decent I just got mine
I haven’t found it to be an issue at least not big
na ion think ill have issue with hand distance
Everything grips fine, smg grips are a little challenging to get to sit right but once you figure it out it’s worth
so i didnt pick a poor choice right
its my first gunstock i just wanna kno if i did a amazing choice
an Entry but Solid choice.
Well worth the cost for what you are getting.
Better then your Amazon choices at the same price
i dont wanna endup upgrading in the future is why im curious
!gunstocks - anything on this list is worth while. Although if you find you want a magnetic version later would be likely the only real issue
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
im ok if anystock just precises my accessiblilty to aim and shoot perfectly really
all stocks... even plastic hangers or a broom pole are designed/will do that by stabilizing the two hands.
It is just a matter of how easy to use/muscle memory and bulky or unwieldy they may become
ok tysvm for this info tass
i just watched his yt vid man thats perfect to me
ig other ppl have diff opinions and ways they like diff stocks diff to me
cause to me cgripvr is beautiful
There is a home/user for every stock design.
What is +tabor mod for cgrip
I think it is a cheek offset to physically compensate for Tabor calibration stuff..
I have also heard it is not a requirement, but I haven't used it or researched it directly.
why is everyone copying my gunstock (jokes)
anyone have a good gunstock for me? i have a budget of 50 dollars and im on quest 2
!gunstocks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Checkout my new Pulsar Quickbrace wrist gunstock, onsale for $45 now, link in my bio!
ohh makes sense
anytips on doing this gunstock calibration in the settings
the gun doesnt stick it just changes each time
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Anyone know a good gunstock
Anyone have gunstock model for 3d print?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I honestly love your gunstock, it's really good, haven't used it in showdown yet only have used it in ghosts of tabor
does anyone have any recommendations on gun stocks around 30 to 50 bucks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Smartstock
Can you move the angle left to right? It seems to only go up in down which makes my gunstock unusable
A c-grip, smart stock, dm me if you need the links
Someone respond please
anyone knows how to make a homemade one
SkolVR SMARTstock. Some people will try and get you to buy from their link but most your fave streamers of Tabor have 10% links on their twitch profiles that will not only give you a bit more of a discount but also help the streamer out
Is your gunstock not straight....like a gun
Odd you would need it to go left and right
It is but for some reason whenever i grab the gun it goes far away from my front hand
I just bought the gun stock made by CripVR anyone have it and good?
I haven't heard any reports of it being bad.
my right hand twitches and driftys away when i aim in im on index any tips?
say im on a budet of lets say $100 aud what would one recomend
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
as a maker myself... I would always recommend my own 😉
But solid options in that price range... $60 US = $100 AUD...
Not too many... but you could check out the cGrip, ExoStock, and the SmartStock, although SmartStock will take a bit to ship/arrive due to backlogs and such.
what set would you recomend?
What type of stock are you looking for?
well idk one that could posably work for tabor pavlov like a bunch of shooters
Classic rail/tube/sling MagTube
Newer Loot and Shoot... Mid-split style?
i was looking at a magtube but thats like 200 aud
they will all work for shooters... although very few can keep up... speed wise... with a Pop One type game.
Mid-Split is the way to go in my opinion for all things... a gunstock that never leaves your hands, but also doesn't get in the way of playing when you don't need it as a gunstock
the thing is i like snipeing in games and in pavlov i laydown and put presure on my left and(at the front) so idk if a split one would be good?
Gunstock options for 50-100?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
i think i might possable go with the magtube
Smartstock
??
i have a quest 2 rn
he will add it back in stock in about 2 weeks
ok
Have there been any updates to the calibration system
@thick hatch how do I put the extra but attachment I got on the stock
Figured it out
Remove the wing nut 😉
I’m a little stupid
Easier and better to ship with it on and tightened vs loose in the box.
Yeah
How exactly… I’ve tried spinning it it won’t come off
Hold the other end of the bolt or use a screwdriver while holding the wing nut. It may just be a bit stuck initially so is rotating the bolt and nut. You will also need to pull off the black end nub
Got the thing off as u were r
Type ig, thanks tho
Thanks great to hear! Both games have the same calibration system now 🙂
My fingers hurt… but I got it
Niceee
can u use wieldvr gun stocks on quest 2
Yep
ty
do u have any gun stocks u can recommend
Magtube protube
Or if I want cheaper go with skolvr
Magtube arrives at your doorstep around 2-5 days skolvr takes 1-2 weeks
And not just that
Great performance etc
i like the look of magtube ill try skolvr
What is the best gunstock for me to get have shorter ish arms and I'm willing to go anything below 70
Take a look at my new “Pulsar Quickbrace”. It’s really compact and onsale for $45. Link in my bio
Honestly that looks pretty darn good bcvr
Looking good, not sure why the wing nut would be that tight, usually I just put them on enough to prevent rattling off the washer/bolt in shipping
so im buying a protube for ghosts of tabor and onward pro play but it keeps saying Card holder authentication cannot be checked, please choose another payment method or try again. what do i do or what does this mean?
why does putting things on walls suck so bad
Wat y'all think chat gunstock vs no gunstock which is best ?
Tomahawk
You have more potential freehand because of flexibility but overall gunstocks will perform better once ur used to them.
@polar jacinth for ghost my stock works wonders but certain guns I pick up on exfil and it won't work for some reason it'll have my guns sitting higher up in my hand
i got a $100 dollar gift card and want to buy a gunstock for lotting shooters like tabor and fire zone, and will also be good for faster pace shooters. i want to still have money for other things like upgrading my headstrap, so is there any good gunstocks for around $35?
Can you adjust the butstick on the Magni stock+?
Anyone wanna be long term duo 10 and over any kit or naked?
Go to lfg and trading chat
I have an Amazon gift card. Is this the best one I could buy under $50?
I recommend you don't, I have that gunstock. Me and many other have problems with it like it feeling way to cheap and falling apart way to easily.
If you budget is just under $50 dollars then there are some options
I recommend looking on Etsy, there are usually a lot more and better gunstocks on there
If you are thinking about buying specific stock I recommend you do exactly what you just did and ask people about it before buying.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Just bought a ExoStock! Can't wait for it to get here
Appreciate it! I plan to ship it tomorrow 😉
Thanks! It’s as close to free hand as a gunstock can get.
How about a gunstock that feels like free hand?
Would a rift cv1 controller fit in the normal oculus 2 gun stock?
Is the smart stock good for Pavlov and tabor
Has anyone used this stock before I know it’s pretty cheap but it’s too expensive to buy and get one shipped to AUS
I had one like that but all black and it didn’t work
Looks like it would actually work tbh
It’s honestly not to bad but the strap doesn’t keep it in the right or same spot so too difficult to reattach controllers
I see
Every half decent stock I’ve seen is like 100-150+ and that’s not including shipping
Interesting
Yes but once you get over the price it’s so worth it
Changed my whole gameplay
What stock are you using I really want the olen asset sbs
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Looks sick ngl
Using the magtube carbon right now have heard good things about the Olen
Yeah that’s 316 dollars that I don’t have but done day hopefully
Yes
I own it
You can use discount code SKOLVR5 for 5% off
Yeah
So, imma say this: if you want a cheap, yet decent gunstock, look into Olen's Vr gunstock known as the ASSET
I own one and I can say it's worth it as a starter stock for 50 bucks.
I have one question about the entire gun stock thing. When your not holding a rifle in the game like when running around holding another type or weapon or looting. Then is it not like hard and annoying to have the stock then
I am going to include a free QuickAim adapter as well! Thank you and Happy Holidays
Anyone know a decent priced gun stock (around 70£) if so dm me the link
@thick hatch how much are your stocks
$50 to $80 plus shipping for the ExoStock.
$15 to $20 for a standalone QuickAim.
Generally most pick the $65 option.
I may be able to assist on shipping or at least verify.
Etsy Auto Calc can be a bit wonky on international at times.
If interested DM me with an approximate address or nearby store etc and I can let you know if there are better shipping options/costs
Ight check dms
ik this aint the channel but its the closest i could think of, whats the best battery pack for a quest3 is it just the base one they sell on meta?
Get bobovr's M3 pro strap. Also #👽・off-topic would be the better place
thanks
Guys I have a 50$ and below budget what gunstock should I buy for tabor
How do i set up my gunstock?
So i got my forcetube and it's really cool!
Under 50 yo aint getting a gunstock that is good
I can tell you to probably wait a bit, gain money and buy a better one, that'll not break 5 hours after unpacking it
Depends on which one you bought...
Ok
Can you tell the name of it
Maybe i can help
Smartstock
i got it in October
No. its well printed
Bro
bro what ?
A false move with the oculus and it could be snapped, and it's well better printed than this
its 2x stronger than a normal 3d printed gunstock
and it wont snap
ive used it for a long time now
3 month aint long time
Is it printed with 100% infil? What makes it 2x stronger than anything other 3d printed stock? Just curious as I’ve been printing my own
Oh, that's a very good question btw. First of all never use standard PLA+.
Check out Overture Super PLA+
Also never use standard infil, it's evil. Invent your own infil shapes as an engineer.
And of course tweak your printer very well. Not even close to standard parameters which are written on the spools.
And try to break your stock over the knee only when testing. If it's easily broken with hands, it's trash.
I also have the Tomahawk that ive used for almost a year now
i suggest you dont make assumptions
Anybody with quest 3 have a good recommendation, idk why but the last one i had was straight but the gun went to the left and the gunstock calibration in tabor wont let me adjust left to right
@charred cobalt
Smartstock,butcher, Tomahawk
my right hand when i aim in it twitches and sometimes drifts away when im not moving the controller when aiming
Anyone know if you can rotate a weapon horizontally when you grip it? I tried making a stock and the weapon is pointing to the right.
Magnetic or non
I have the magnetic
I’m thinking of getting it
I mostly play Pavlov and tabor
it works great
if you have any questions feel free to ask
I’ll send a dm right now but when I get it I’ll text you
No, adjust the mounts outwards
nice, you can use discount code SKOLVR5 for 5% off
Oof guess I didn't think it through enough the mount is fixed. I'll figure something out
always always always always always go with an adjustable stock
we've known this is a requirement for any stock someone wants to use for over 8 years
Nah I made it my self. First time trying.
I didn't know before making it. I'll fix it somehow
Can someone send me a link to a good gun stock less then 100 bucks
question, does a gunstock make a positive or negative difference?
Positive
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
i thought smart stock was least $70
non magnetic version is cheaper
Are there any good gunstocks for the rift cv1?
so whats it do neccessarily?
Stabilizes and aligns your hands vs free floating in air, which improves accuracy tremendously.
yeah
Thanks for a solid reply brother!
How much
This isn’t my file so I dont think I can sell them, I could provide the file probably though if you know someone with a printer friend
Oh
Sorry 😦
Just bought a gun stock when it arrives anyone got tips?
You're always welcome, friend. Added you as a friend here, feel free to ask anything.
This is a weird one (I think.) Gripping the forestock (with offhand grip button) is not producing repeatable results. The weapon snaps to a somewhat random angle each time. If I release and regrip a few times I can get it to settle to the "normal" position as I originally calibrated it. What could it be?
This is not the case with other shooter games, there I have consistent behavior. Did I set something up wrong? I've cleared out and tested with no calibration and it still happens.
Im making a gun stock anyone know the angle of the angled foregrip
It varies on a per gun basis. You'd want to make it adjustable
The problem 8s im in a strict dead line so I can only make the length ajustable
And im going to make 2 front grips
I highly recommend making it a straight line for use with the shift rather than the canted
If you cant make it adjustable, it wont be very good
U recon I should make the length ajustable or the grips ajustable i wont have enough time for both i dont think
Grips 100%. Length can be adapted in game. you NEED it to be able to rotate on the Z axis otherwise it wont be able to adapt to certain guns properly
OK thanks
Oh
Any cheap suggestions for the quest 2??
I js got the kobra mamba, it hasnt arrived yet but ive heard its good
How much?
is the Glistco Magni Stock good?
I think around 85 usd
How to the hell do u calibrate ur gunstock
In yiur settings
theres a good vid on youtube
Ik that but it hella weird
Link?
Ok
When calibrating can you angle it left to right? It seems to only go up and down
does getting a vrstock actually help
Any recommendations for a gunstock?
(Unless you wanna aim with the air then yes they help lol)
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Ty
im getting a gun stock very soon any tips for using a gun stock
Get used to taking controllers off gun stock and back on really quickly so u can eat, heal etc
Get faster else u may get shot by being too slow
Try other shooters if u wanna test the gun without wasting ammo on ghost of tabor maybe contractors or smth
should be ok i got a cheap gunstock and it is a big improvement so just try it and remember it takes time to get use to a gunstock
There are options where the stock never leaves your hands, but instead splits in two and doesn't get in the way of looting 😉
like the ghost of tabor gunstock
Technically... But I don't know many that would suggest or advise on that one.
i thought about it awhile ago but its never in stock
!gunstocks - check out the ExoStock, the Asset, the Butcher/Tomahawk, and the UltiStock
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Anyone have tips for calibrating with physical gunstock ? It doesn’t seem to calibrate correctly
I’ll have iron sights lined up but then I use the gun I want and it’s completely off … idk what I’m doing wrong
any1 know a good gunstock for right handed players all this ordering stuff is making me confused and for quest 2
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
For calibration why delete game file save? And how
Like I don't wanna lose everything and I've already reset and idk how to delete save of quest
hey im lookin for a high end quality gunstock, i got some money play with is anyone able put me on to one? im in the U.S so i want something thats able ship to me pretty fast.
!gunstocks - 😉
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
@thick hatch are you still looking for testers for your 3D printable gun stock, I have a friend that is interested.
Sure. 😉
Have them send me a message.
👍
Just finished a new overview video for my ExoStock.
Hopefully answers and questions anytime might have.
Link in profile.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Are most quest 2 gunstocks compatible with quest 3 does anyone know
Usually no. Most gun stocks are very specific on the cup design or top mounted hold.
what is a cheap but really good and reliable stock
!gunstocks - define "cheap"
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
50-100 perferably
Some decent options to consider on the list. 😉
Ultistock,Smartstock,Cgrip
I personally recommend the smartstock
price?
bro i need a good buget gunstock
Does anyone recommend a gun stock for the quest three?
use the command !gunstocks or !gunstock idk which itll give u a decent list to work with
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I'm gonna 3d print gunstocks and sell em for like 100 they cost 20 to make 30 to ship
Woah pal give me a 50% discount then
Why I gotta make my money too fucker
But like I can’t find any fucking oculus rift cv1 controllers Gng we could be partners
Can anyone tell me if there are any gunstock that do next day delivery on Amazon . Or if meta quest 2 gunstocks work with meta quest 3 controllers
How can I see the pinned comment from rage on how to calibrate my gunstoxk ?
Can someone give me a link for a full gun stock budget is about £45
I’ve tried but I can’t find any for quest 3s
quest 3s controllers are the same as quest 3 if that hquest 3s controllers are the same as quest 3 if that helps
Found one that’s coming tomorrow was really lucky with it
Should i let this thing go
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Certainly an option. All the makers here offer their products at the price that makes sense for their time, efforts, and out of pocket costs... It is always cheaper to make your own and no one is going to make them for free/cost for anyone/everyone that comes along. 😉
I would not say it is good, but works. Be careful when calibration CX Storm - has to be calibrated as Rifle, not SMG
How much is the stock? I need one so bad
!gunstocks - has prices for verified options include the cGrip
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Out of budget
sadly they dont get much cheaper
@whole cairn check your dms. thats a easy gunstock
I need help im trying to calibrate my gun stock but when i do i cant grab the gun with my off hand so when im done when i grab my ugn with off hand when using the gun stock it goes weird
Every time tabor wipes do I have to recalibrate everything
recommended gunstocks
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What’s the best/most popular in the majority opinion? About a year ago I got a spine one but it was terrible
Tomahawk or MagTube are usually considered the top... But also cost wise. Lots of options to consider in thread link above
Cool. I’m more concerned with my ability to use non rifle things. Like switching to a sidearm or opening a door/grabbing a backpack. All the basic stuff.
Go for a mid-split version vs ProTube/Rails
I have no clue what this means but I’ll search it up I guess
thinking about buying the cgrip(on a slight budget) is it any good?
Check my bio/links in the post. Details laid out there... But basically you want a stock that stays in your hands but doesn't get in the way/need to be detached to do anything
It is a solid fixed point option .. but is a solid/single piece stock
u got any recommendations? im kinda new to this
!gunstocks - I am a maker myself
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Yo I have a spear gun
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Do all gun stocks work with tabor
i guess so yes
Ceps
yoo whats a good stock that I can use my primary and side arm
Who needs stocks bro you gotta use your arms!
The cgrip is what I use super easy to use no magnets and has a side arm slot connected to it for easy drawing
Yo I checked it out. It looks good. I'm new to stocks. How does reaattaching the grips without seeing them?
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Amazing
It's more immersive and it helps with shaky hands.
Do y’all see the vision?
buying a gunstock on amazon, got 75 dollars who can hellp me get a good one?
!gunstocks - Swap the Amazon for Cash and go from this list haha
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
hey i have that but it turns my gun sideways can you help me with that
Ain't gonna lie I returned it
What is a good gunstock that is below 40
Not gonna get much for that price but the IStock is around 30
I have a Istock and it’s been great for the last 2 - 3 years but I’m thinking a tomahawk
Yeah you have much more freedom with the tomahawk and more stability
Ok, ima order it then
Also it don’t matter what it’s made of💀
What’s are some crazy gunstock people have made?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What about this one
From what I have heard it’s extremely fragile and breaks super quickly, plus I am pretty sure it’s just a knock off of the magtube.
The best tip I can offer is to not buy a gunstock from Amazon they are almost all super low quality
Sm1 know why I havent gotten my gun stock from skol vr? It been like 2 weeks or 3 not 100% sure
Hello, friend. It's because it's international with standard (not express) shipping. If it's the US, it's 7 days on making plus 2-3 weeks on shipping. Not considering the holidays shipping delays. For more info, please read the product description, shipping policy, or DM me. Added you as a friend here. I am always at your service.
Texted you in dm's
Getting a gunstock once I pick what one I want my budget is 600£
Need recommendations
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I don't click on links 😅
Tomahawk
It is a pinned post in this channel. It is not an external or anything and the call is made by the mods/devs.
You can check the pinned topics directly for one from Ceps to get to the same list of vetted and verified stocks.
Or smartstock if you are on a budget
Thanks! I just don't trust links for the life of me
NP. And generally a safe bet haha
You can do a name search for any of the stocks on the list.
ExoStock
Ultistock
Ak-47 stock
cGripvr
SkolVR
OlenVR
Etc
Cheers I found a carbon fiber One order that it come around Friday I will send you a picture when it comes 👍
I got this one (cheaper on Etsy) and it works great. I got 0 issues with it and I’ve been using it for almost a week now.
i got that one its great in my opinion
AK47 stock seems interesting but I don’t see it online
I removed it since I'm working on a V2, but I can give you a sneak peak of the finished version
Btw it's AFK-47 as in Away From Keyboard 😁
Looks nice !
thanks bro 😊
If you don't mind me asking what is this for ?
It's a bipod, it's not sold with it, but it is compatible so you can attach your own bipod if you want to use one
Can someone recommend me a gunstock for a decent price
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Okay 👍
Anyone know if this is a good gunstock
I need a gun stock for quest 3 i got a budget of 50-70 euro
Smartstock
You can use discount code SKOLVR5 for 5% off
Someone’s a shooter.
Are there any good ones on Amazon?
That’s delivering tn
u bought it?
i cant figure out calibration for golden sks
Could u send a link?
Does anyone know why when I put my quest 3 controllers into the gun stock the left one losses trackig and bugs out
can your headset see the face of the controller?
I think yeah
Is the 3daptive good? And is the bipod good either?
are gunstocks clunky and hard to use?
send a picture
depends on what you get
i just feel like it would get in the way or be hard to use your controllers normally
just depends on which gunstock you get.
whats a good one that isnt crazy exspensive
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
it shouldn’t be losing tracking like that. is your room bright when you play?
Yeah
weird, idk why it’s doing that.
could just be the controller in general. have you hit it on anything?
hes just got the headset so probally not
Nope I got them new in Christmas and they work fine normally
idk then
Yea
My gunstock is some hkw calibratided crooked and it's won't stay which setting to i put on virtual on and physical on or one off one on cause one makes my arm 8 ft long and the other doesn't shoot straight
whats a good gunstock that isnt very expensive?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!GUNSTOCKS
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Just got one it's taking a while to get used to
anybody got a spear I can buy
Wrong channel - #🤝・pvp-groupfinder
shit there right next to eachiother my bad
anyone recommend any gunstocks that are decent priced and good
is a gunstock worth getting? all my friends have one and they make it seem like a necessity, is it rlly that good
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
How to i use discounnt codes for skolvr?
!sts
Firstly, use only off-topic for using this command, as any other channel will not work
Be sure to link your account with Discord
If this is not working for you, try relinking your account
You'll have to specify the range of time you're pulling for
/statistics [put time here]
If you are having trouble with the command AND your account is linked
again, try relinking your account.
!sts
Firstly, use only off-topic for using this command, as any other channel will not work
Be sure to link your account with Discord
If this is not working for you, try relinking your account
You'll have to specify the range of time you're pulling for
/statistics [put time here]
If you are having trouble with the command AND your account is linked
again, try relinking your account.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
is there any cheap gun stocks lmao
check ur dms ill send u cheap ones and help u find the one u want
alr bet ty
Yeah I'm not a gunstock type of guy and will probably never get one but if I ever consider it I'm choosing this 🙏
I'll try to convince you through marketing videos next then 😈
I'll see 😂
What do y’all think of the CGripVr? Does it have issues with the rk grip or anything?
What gunstock should I buy for the quest three
Don't post imgs of guns here.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
does this look like it would work it was just a cheek Amazon bundle
Does anyone have any good gunstock recommendations
Tomahawk
@umbral kettle thank you
You can use discount code SKOLVR5 for 5% off
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
when im using a gunstock its really inconsistent where my gun ends up aiming when i grab it, sometimes it will be pointing to the side or down or up anyoone know why? its calibrated correctly in settings
Does anyone know a cheap gunstock for quest 2
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
cgrip
Anyone ever used the cgripvr stock? How does it handle the rk grip?
Ever used it?
Depending on how your front hand is tilted will actually affect the alignment as that changes the center point of your controller. Try to maintain the same positioning on your front hand when gripping.
planning on buying it
Lmk what yu think I been thinking about getting it
Maybe go to the one shot discord
yea I got you
I've heard itz amazing for the price tho
What’s the “tabor mod” on the Cgripvr?
Should I get the mag tube or the tomahawk?
What y’all think
You could probably make that out of pvc pipes
But it’s adjust for smgs and shotguns and sniper and it come with a shoulder sling
Yeah still could make it out of pvc pipes
Huh
Recommend any
lol
Or i dont use the stock
the onestock is pretty bad imo. Feels cheap, controller connection is kinda loose, etc. Go for a magtube
you could, but you lose adjustability, ease of use, good controller mounting, etc
Easy fix lube
Recommend any lmao
Not stable enough unless you adjust then wait for it to dry then are able to use it
Protube's magtube
@tardy kayak I was looking at this and that one u said is the top one
Yes
What’s the difference between Mk 1 and mk2
mk2 moves up and down, mk1 doesnt
The Mk 2 says adjustable does that mean you can like change it to an AR shotgun sniper SMG
Ohhhhhh
no, its just the stock part
Oh lol
Should I get the mag tube or the tomahawk?
Idk
magtube
Yeah I’m mostly worried about it not working with the rk grip. Seen people with gunstocks say they can’t use it because of it being sideways but it’s the main grip I use lol
Cheapest you’ll find is like $40
where from cn u send link?
WELCOME 2025! WOOOOO BABYYYY
What
Not for tabor, because tabor tends to have its front hand tilted…
Any other game is good
Does anyone want to get on
oh what one
any thoughts on the ultistock?
What cheap gunstock should i get for under 35 or 40 pounds
So small review for anyone thinking of getting a Brandovr gunstock. It's good but it's not. It's a good gunstock built strong with good material and has It's benefits over the mag tub. Bit with the amount of moving parts and flaws I can't fully recommend it either. The washers and screws constantly fall out, so many moving parts things shift and can throw off your aim. Atleast for me the part that connects the dominant grip with non dominant grip is constantly coming loose ect, and if you shake it the slightest bit to hard turning around you have a jigsaw puzzle waiting for you after.
for context i own the ulti stock with magnetic grips for quest 3 and ive had it since around nov 27 2024
Hm strange that screws fall out on yours
I’ve had it for a year nearly and nothing has fallen out
@hollow zinc defective screws perhaps?
Are you using a screwdriver? They shouldn't come loose lol
Just tighten them properly, they'll hold for years.
You should be able to literally flail your hands as if youre playing beat saber and nothing comes loose. Tested endlessly and designed specifically to allow you to throw grenades and use melee weapons with it attached without coming loose. But you gotta have the screws tight with a screwdriver. The knobs and wingnuts are there to just prevent you from having to also use a wrench.
is there no way of fixing this? kinda ruins using a gunstock if i have to fumble around everytime i try to grab my gun
Yeah I've used a screw driver and the nuts (or whatever is supposed to hold them) come loose so often especially the ones that connect the 2 grips or the cheek rest. I can try using the spare screws to see if that makes a difference
What is the best budget gun stock for tabor do yall think
!gunstocks - all budgets are different, but prices listed with a lot of options to choose from
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
With yours what is the difference between the 4 pc ultimate and 3 pc etc
The 3 pc doesn't have the cheek stock.
The 4pc adds the cheek stock
The "Ultimate Package" adds a 2 hand golf club.
You can also optionally add a QuickAim to any tier
What is the cheeck stock and quick aim?
Cheek stock is the part that goes up to your cheek... a 4th point of contact.
The QuickAim is an alternative configuration that doesn't use the mag portion and allows for quicker alignment and variable distance placement.
This video may be able to help as well.
https://youtu.be/oZNi4-4wmsA
Aight thanks
Hit me up with a video. Something seems off. Should hold strong. Well over 1000 sales at this point, your issue is very not normal
Anyone used the cgripvr? How does it handle the angled grip?
What gunstock do you guys recommend
Sent it in dms
h
Tomahawk
an actual gun
What gunstock are you using? It might be a problem with the front controller mount not being stable enough.
Does anybody have this problem? I just got the protube vr for q3 and ever since I turned on physical gunstock my gun would lock up whenever I grip it and wander when I ads. took vid for example I've already asked people in the #❓・questions but didn't get anywhere
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
yk that you can change your hand rotation right?
I don’t know I use one but I only use the back part of it and no calibration
Why not use your chin as a stock, like remote in front of your chin?
I have a quest 3, I shoot guns irl and it’s just more comfortable to have a gunstock
More immersive aswell
I was thinking of purchasing a gunstock, but was wondering, how would you stop holding your gun to loot? The controllers attach to the grips right?
I used to do that with the ring on the quest 2 controllers, but then I would also get tracking issues
depends on the type of gunstock, but sometimes you can just release it and it will stay on you thanks to a sling, or it can split in two to free your hands, or it always stays attached to your dominant hand but the other one is completely free, etc.
Protube, I just replaced the magnets on it so it should be working fine. I only have this problem on tabor as well
i use a pro tube to and i have the same problem
why will my gunstock calibration settings not save right after setting them
Any budget friendly recommendations for a gunstock for got? Don’t wanna spend 60$ on a gunstock
What’s the best budget friendly double controller gun stock with a strap over your neck/shoulder under $100
@thick hatch is this amount of it coming off normal?
I actually haven't seen a magnet flake like that, but it shouldn't effect the use/function. If so, let me know
Alright thanks
What gunstock do I get
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Anyway to calibrate my guns without messing with my current calibration?
!tk
To report a teamkill that occurred in THIS server you must DM the following to @quasi pilot.
If you are missing ANY of the above, your report will not be processed.
Any gunstock recommendation from amazon under 50
Cooked
I spent 180 on mine 💀
this one
No, my friend got that exact one and it broke after a couple of days of use.
Cooked
What one
ProTubeVR MagTube with adjustable stock MK2
planned on buying this but it costs way to much
We also have the Starter which is cheaper and you can get the shoulder stock extension as an add on
oh really? I'll look at that rn
Our products are very high quality with a 2 year warranty and an open ecosystem. Just buy a product once, use it forever. Upgrade headset? Just buy new controller mounts
If anything breaks after 2 year warranty we have spare parts for everything available for purchase, to easily and cheaply maintain and repair
So it might seem expensive, but the use you get out of it over many many years is not small.
For example I'm still using my original ProTubeVR from March 2018 no problems. And the parts we use for everything such as joints etc. have vastly improved in quality since then.
Magtube protube for quest 2
anyone know a budget gunstock thats not 150 bucks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Anyone got a nice 3D printables design?
I've got that one and its alright for your first stock
Also try turning off hand tracking.
Smartstock you can use discount code SKOLVR5 for 5% off
What’s the best magnetic gun stock for under 150
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
ok ty
Is a gunstock worth it?
Yes
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
just purchased a wield vr gunstock, is it worth it or should i get a magtube
magtube
I got magtube but I've never had a wield vr
Idk if it's worth upgrading to
Butcher 😜 heard alot of bad thinks with wield
Butcher
what gunstock should i get if i was interested in getting one for under $50
slightly above $50 is okay, but under $50 is perferable
Does anyone know if the sbs asset gunstock from olen is good?
Is the c grip good for this game
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What’s a good gunstock below 50 (im broke)
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Should I get the mag tube, tomahawk, or butcher?
I like mag tube
but its your choice on which you see fit
Tomahawk
Can you explain?
The ability to fold your gunstock to fit your weapon type in less than a second is big
Do you use it?
Yes i own it
What do you do when you need to drop your gun and use your hands?
You just drop your gun
The gunstock isn’t big and one hand detaches via magnet
So you can loot ect.
my dumbass just realized i can adjust how high the buttstock can go on the magtube 🤦
Magtube
Magtube has an adjustable buttstock
And carbon fibre options
While skolvr imo is a cheap build
Yea the magtube is king
Explain how its cheap
Tomahawk can literally fold as i said, you can adjust rotation and magent hand height on the Tomahawk and it just works. i have the raidr which is made of carbon fiber and my Tomahawk feels better to hold and play with
Magtube is printed with 3D printer except only joints between the tubes. Everyone knows that. And as a man who knows about 3D printing much, I would never print it like that, for sure. And I would never use carbon infil filament choosing smoother look over the actual strength. So Magtube surface finish looks a bit smoother, yes. And as a 3D printing noob who knows nothing about 3D printing, you're probably right that Toma looks not so smooth on finish surface. I will agree with you.
But everything else is delusion.
I think he means magtube uses carbon rods, not filament with carbon fibers
Magni uses them. It's obvious that it's not looking expensive because of that in his opinion.
10$ tubes is definitely not what makes anything built not cheaply.
I agree, especially for this application. The biggest benefit you get from it is lighter weight compared to other tubes
Yes, friend. The joints and fully infilled cups and everything fully infilled for strength instead of engineering insides wisely adds 95% weight of stock there anyways. And in such things I think the amount of labor and efforts put into it, is what really matters if we're talking about actual value.
If I'm wrong, then OneStock is the best stock on the planet actually. But I don't think I'm wrong.
Does anyone know where I can buy the same gunstock as scoopg on YouTube?
Use his referral link for buying it for sure. He introduced it to you. It's in his bio or linktr.ee
Or in video description.
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I was talking about the rods. I like your stocks just not my style if ya get me I can totally understand where you’re coming from.
Sold out
But rods are the same with Magni, you know. About everything else I have you fully informed now. You may ask anything at any time freely. And the style or design is the matter of preference for sure. To each their own💯
Out of this list which one do you think is the best and under 100 bucks
When do you think the butcher gunstock will restock
It's written in product description. But you've been asking of lower budget so cGrip, ExoStock, UltiStock, SmartStock is at your preference.
🔥🤘
👍
I'm thinking of getting the SmartStock with the magnetic and cheekrest but I have a question does it support angled grips? And also do I have to pay for any shipping fees or anything expect for the gunstock itself (Im in the UK)
@mental lance
Added you as a friend here for any questions more. But if you don't want to recalibrate (readjust gunstock) for each angled/normal gun grip, it's preferable to use straightly placed shift grips with almost same stats and recoil with any gunstock on the market. Tutorial is in my Discord server. No fees while package value is less than 135pounds for the UK.
Does anyone run this? I just bought it to see how it goes. If I don’t like it for tabor I’m sure I can use on different shooters.
I'm interested to see if you experience any occlusion with the controllers underneath the stock...
That’s what I was curious about also. It’s a relatively cheap stock so I don’t mind testing it out for a few weeks to leave a review. I have nothing else to do besides work, gym, and game lol
This is garbage I just returned it
The SkolVR stocks are alright, I just hate that the whole ass butt stock is stuck to one of your hands
The stock is tiny and the controllers are too close to the physical gunnstock itself. Check out Etsy, im still searching for my perfect stock as well.
Well shoot. I’ll at least give er a shot and see what happens. If anything I’ll let my nephews use it to play games with instead of using a more expensive one
thanksz
It will lose tracking.
best gunstock i should order??
Tomahawk in my opinion
!groupfinder 👇
To Access PvP & PvE LFG: https://discord.com/channels/949081704625209404/1196523375355494471
Once you have access to PvP & PvE LFG:
PvP: https://discord.com/channels/949081704625209404/1084149169482109058
PvE: https://discord.com/channels/949081704625209404/1324405065384988683
Group Finder Channels include all trading activities.
Can anyone pls send a 3D print
I just upped my ship window as I will be going to CES next week, but can still ship out Sat or Mon any orders that come in.
As to shipping costs themselves... Not much that can be done
really nice gunstock under 30 bucks right here, modded the cheek rest to make it more comfy
Are you selling the gunstock,or promoting a website if so I'd like to know where,the ones I'm finding are overpriced
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
https://a.co/d/0es5Yah it went up in price but the magnets are good and everything, but it’s not steel so be a bit cautious with it
Mr Tass exo stock offers a solid build not to long shipping either.
Magtube
Anyone know what the usb stick does??
I haven’t been able to find one that works with every gun unless I slap an EOTech on it.
What’s the cheapest but Acctually good gunstock if anyone knows?
i bought one only to realize im better without the hassle of magnets
does magtube shipworld wide?
They do.
Best gun stock for people on a budget?
!gunstocks - quite a few options.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Thanks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
anyone recognizes this gunstock?
look at my posts above
Dosent deliver to me for some reason
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
that wasn’t a proper gun it was a airsoft gun late reply but
hoping it arives today ill letcha know when i get time to check it out
Appreciate it
ill run a few matches with it and give you a run down after a few differnt guns. mainly pump and bolt action
2 days ww
Has to be obviously marked (like an orange tip)
Oh right well in the uk we have diffrent rules that they don’t have to be orange tipped but fair enough
.
Shipping for it is shit
Generally are u dumb?
Sir ive had my in transit on express shipping for 12 days 🗣️🗣️
You order it and it arrives at your door 3 days later
And ik the ceo 🗣️🗣️
No it doesn’t 🗣️🗣️
Oh do u? Maybe go with dhl next time.
How long is other companies?
And they handed it off to USPS
Express priority delivery
1-2 day delivery
Everyone’s experience is different but 1-3 days shipping is there priority
Wasn’t Magtube fault it was the couriers
No im talking about wieldvr skol etc
My friend ordered his gunstock from someone in Europe that makes his gun stocks alone and got his before me
how do I know when my gunstock calibrating is right?
can some one help me'
because i dont know if its my gunstock or if i just need to calibrate it
it is called weild vr one shot
if it's easy to use
its preference and how your gun stock is shaped
you generally want the stock of the vr gun near the stock of the gun stock
you also want it to be pointed at an angle where you can easily go to iron sights
calibrate it every time you get one or adjust it
it doesn't automatically calibrate
i might get a different one because i dont like the controller holds
okay mr moneybags 🤑
the full 90 day refund:)
@shell mulch this is ingame play with the stock
The only thing i dont like so far it forgetting the rod is in the way when reloading
Otherwise it was easy to set up in the tutorial so far its been better using this then free hands but it does cost me my controller rubber gaurds
which stock you got#
.
i didnt go that far up
Lol
All good
For this being the price it is unlike the cheaper ones it slides and locks realy well also doesn't have cog style angles so i can adjust it way better then my old one-- which broke on someones face..
ye im not the biggest fan of my stock
Yes i did also stress test it on accident i wacked a door frame. All an all good build
cool
My old stuck was good for being a first stock but this on i can bend out the mid section better so its out the way for reloads aswell as giving me easier draw and faster connection to the stock its self the magnets ant harsh to connect
Doesn't feel like i have to break away
DEVASO Magnetic VR Gun Stock for... https://www.amazon.com/dp/B0CMWC8ZFJ?ref=ppx_pop_mob_ap_share
This any good? Just got it
Does anyone know the diff?
Hiw th do i calibrate this
could any one tell me if the one shot weild vr gunstock is good
Ty
Should i buy it my other gunstock broke
Is buying a gun stock better than free hand ?
No, it's pretty bad
Yes 100%
It takes a sec to get used to, but after that, it's super hard to go back
It's better to go buy a tomakawk or magtube. Buying a cheap stock and having it break or not work very well and needing another is worse than buying one good stock
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
yea just wanna make sure because I'm in Canada and I'm about to buy it
Is cws going to work on the forcetube compatibility problem?
It works temporarily ☠️😭

Js bought this cgrip vr gunstock anyone know if its good?
Fire dude if u need help lmk!
It’s fire great decision
What’s the best gunstock 50$ or under
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
lmk how it is hwen u get it
when
You looking for gunstock recommendations?
yea its either i buy cgrip rn or save for magtube
idk any other really good gunstocks
Save for Magtube. It’s worth it
The packaging and quality is beyond me.
alr bet ty man
No problem.
Gotchu!
Many options to choose from
If you’re on a budget get a cgrip or Smartstock
Magtube quality is a metal rod with 3d printed cups and buttstock
Any good gunstocks on Amazon (around $50 dollars)
I just got a gunstock but it’s asking me to calibrate for all these different weapons is that necessary
So...I have like $50 on Amazon, anyone got recommendations? Kinda want one that'll let me use pump action shotguns in shooters better
What kinda dollar free item is that 😂🤣
I’ve been using it for a week now and have killed people that are fully kited
i highly recommend saving for a real non-budget gunstock as it will last longer and the quality will be better overall
can I link an item I'm sceptical on here? I found a gunstock on Temu of all places, €50 but it doesn't seem terrible for a first
(I have €200 in Temu credit, so any excuse to eat into it is great for saving money lol)
do NOT buy a gunstock off temu 
your not seeing the vision.. 
(I'm just stingy with money I'm trolling)
Yeah, I don't, because it's not a good vision 
on some real shit tho, is there any you'd recommend? i haven't actually had one before, but u would generally hope for something magnetic, as I have heard it's best for alternating
(should add that I'm on quest)
100% protube magtube for every headset
I'm quest 2 
has all the adjustment points, full controller detach so you don't need to take the whole stock off to stop using it for other games, amazing build quality, no tracking loss
works on q2 perfectly fine
I'll look into it, I appreciate it bro
wow, I expected a gun build like the others, this is actually tubing
slightly outdated picture, but this is how i have mine set up
looks hella cool, is it very practical for tabor? like being able to loot and traverse backpacks simultaneously?
yeah
it takes a couple days to get used to, after that its super smooth to use
it doesnt having a chuck of 3d printing hanging off your firing hand too so that doesnt get in the way
yea, I feel you. Only thing that has me hesitating is the €200 price tag. For that, I could totally update to the 3s or even 3, which would probably be more beneficial than a gunstock atp
ykwim?
headset upgrade really only is needed if you literally cannot play at all imo
overall id much rather use q2 and a magtube over a q3 without one
i switch between q2 and a varjo aero and it's not that bad imo
does yours have haptics?
My stock? No. The haptic stock is super back heavy
it makes it worse for ADS speed and overall handling
No
I would say get it in carbon fiber if you can, otherwise aluminum is good enough
If you upgrade headsets ever, all you have to do is switch controller cups instead of buying a whole new stock which is also nice
I haven't even seen that.. Already €210 for the base aluminum.. 
2 year warranty is definitely a pro
It seems like a lot until you realize how helpful it is. I didn't want to drop that much either, but my hands shake like crazy so it's basically a necessity now
I get you dude, im totally here for it, but I'm just sceptical the €50 lame 3d print would do the job of this, just something to steady up
Trust me, quality of something you use everyday for a while that you use as a brace to aim is like half of the whole point of owning one. Sure most stocks will increase stability, but lack in quality and break over time. My buddy used a cheap one for around 5 weeks before it just snapped
plus you dont really get the real gunstock experience a lot of the time imo. The cheap stuff always feels flimsy and doesn't really help that much
totally get that. I have just found unbound xr selling it €60 cheaper
pretty confused as to if it's second hand either lmao, looks hella legit
more than likely a bit fishy
used magtubes aren't super bad half the time, but you dont get warranty or verification that its a real magtube
Oh shit, I have been looking at the expensive version
the main is only €100, I'm just stupid
what would the difference be between regular and vrml be?
regular is much cheaper, but doesn't have the carbon fiber tubing or the mk2 stock. The VRML thingy is just a limited time partnership with vr master leagues. If you're unsure, get a regular magtube and you can always upgrade parts later down the line
to be honest? I think I'd opt for the quality one, as I tend to opt for the better versions when available, to get the most from it. Go big or go home 
it's worth it imo, but only go for it if you really want to. Aluminum tubes and a mk1 stock is still good enough to pop tim tims
I recently got a gun stock and I ran into a problem where when I grab somthing off of the ground or my gun my hand glitches out and gets stuck behind me anyone know how to fix the issue
Go for it you will love it
Fire you should upgrade to a mk2 buttstock
it's much better?
Yep
Anyone know we’re I can get a good and cheap gunstock
!gunstocks - a few suggestions.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What's all this fuss I hear about kobra vr?
Smartstock
My buddy just got me one actually! I'll get a picture when I get home from holiday
I bought this gunstock. Thoughts?
https://www.etsy.com/uk/listing/1640163656/kobra-vyper-vr-gunstock-for-quest-2
The video attached isnt even the stock thats listed
How do you calibrate you gun stock