#🔫・vr-gunstock-chat
1 messages · Page 99 of 1
its flexible but stiff at the same time i dont know how to explain it
change the rifle calibration settings
I understand dont worried thats very cool i was thinking that ur tubes are the tipically PVC water tubes
I tried several times but not work for my
Son weapons not fit at all
oh thats sad, i dont know what else to do then
Anyways is quick to use in that form
try search it up on youtube or reddit if you cant find a way to fix it
what vr do you use? im a bit curious
👍
Has a lot of fob no weight and good for pcvr
Is a good update for a quest 2
I went to Q2 to Pico 4
im on a q2 rn without pcvr bc i gave my better pc to my cousin and now i just have a pc that cant really do pcvr so im saving up for better parts so i can do pcvr
and idk if i should stick to quest 2 or change to q3 or pico or whatever
Yes really worth the change Q2 to Pico 4 or Q3 becouse pankake lenses
Pico "in my opinion" has better pankake lenses and better fob
fov?
Yes 102
oh
lens?
Has his own mottors ti move the lenses
Yes
cool
I recomend u to go to full AMD pc more cheap and more efficient im running R5 5500 Rx6600 and 16gb RAM corsair
rn i was thinking of getting a RX 6650 xt 32 gb ram and intel i5 12400f
I not have any problem using Steam VR vía picco conect (air link) after the actualizacion
oh
I recomend u to go full AMD to use FSR
And have more efficient
what amd processor can fit the 6650 good?
Becouse if u have CPU AMD and GPU AMD u can use the boost mode
Depend how u much u want to spend
not too much
For more cheap R5 500 And B550
More money R5 7600 B650
But R5 5500 really worth it
Im use It since his launch and is really good
Yes im using rx6600 R5500
No problems im playing with normal resolution ( pico 4 has 4k resolution for normal) Epic settings and not any issue
👍
I only have problem in contractors after the movilised update
But everyone has problem with It after update so no worried
ok
And using normal pc, Warno i play on High/Ultra Warhammer 40k on High (becouse i have 16 RAM) insurgency ultra, Reforger High, diablo 4 ultra.
U can use Fluid motion Frames to duplicate fps go to 70 to 130
I use It on normal pc playing on vr not
i will probably buy amd 5500 and not intel
Is really worth
yh i read abt it
Yes
are you using aio or fan cooling>
ah 3 fan aio
Mine cost me 120€
Pc Componentes
But not need a 360 aio u can use 240 instead
Im use It becouse of my cas
Get an AMD CPU and an NVIDIA GPU, AMD GPUs have a lot of issues with VR
No with the new drivers
?
what is a good case with it?
It's better iirc, but it still isn't as good as nvidia drivers
Yes thats true but no issues and good fps and not much latency using AMD GPU
EXCEPT USIN VD
if u want to use VD dont buy a AMD GPU
not good decoding
oh
Yeah. Future proofing wise I'd still recommend nvidia just because it probably wont have as many issues in the future if steamvr changes a bunch
whats a good nvidia gpu thats like the amd one price and capability wise?
Virtual desktop not do good decoding with AMD GPU drivers thats result adding a lot of latency
Rtx3060
30 series cards are well enough to use with a Q2
what abt q2
But rx6600 in almost all games are more efficient than rtx3060
Depends in if the game was made for Nvidia card or AMD card
Warhammer 40k IS a really good example
Where are the chat police?
I just got my first physical gunstock anybody have any tips or things to know about having one
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Thanks
should i but the utilstock ultimate? for you does a stock make a big difference. its a bit of money.
Those that have a stock (an actual one... even a home made one) have trouble going back to not have one/don't want to 😉
I'm thinking about buying the protube gunstock. Any opinions?
Best stock on the market rn
All the adjustments you'd ever need
Ragesaq has great setup for it
Who wants to run maid kit 13+
!lfg
To Access LFG / Trading: https://discord.com/channels/949081704625209404/1196523375355494471
Once you have access to LFG / Trading: https://discord.com/channels/949081704625209404/1084149169482109058
Group Finder Channels include all trading activities.
what is the best possible gunstock i can get?
Depends on your budget
I use the Tomahawk and i think thats best
anyone got some experience with the 3d printed v.s.t.o.c.k ?
https://www.thingiverse.com/thing:5476216
not sure if it's me or if it's tabor that doesn't like it - atleast i'm having some issues with to get it properly 'calibrated'
is this good? i just bought it
Yeah 👍
just bought it now lmao
But buy mk2 buttstock and extra mount bracket for short weapons
mk2 buttstock? is it this
ok good i got the good one
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I have my own 3d printed gunstock, it's improved alot for only 5 euro
kind of a long stick, with 2 things where my controllers go in and a magnetic part for my left controller
if you run into any issues setting it up for ghosts of tabor refer to ragesaq's twitch he's got some guides on how to do it
Ok thank you
@dim lagoon
It doesn’t really matter that much I use a single point sling but double points also work but it really depends on what you think is comfortable
Is a gunstock actually worth it?
yes
What’s a decent one on Amazon?
magtube in full carbon. dont buy from amazon. you can buy it direct for cheaper and with faster shipping
Okay thank you!
magtube full carbon w/mk2 butt
U got a pic ref?
Cuz I don’t got all that much space in my house
^
???
what does that have to do with anything?
Some stocks are huge bruh
Like play wise gng
Ig
can you T pose?
Here is the smartstock https://youtube.com/shorts/1soJQ5mdY3E?si=G5PIJ7gNUVnXEe_m
Sort of
Bet
I need to bend my arms a bit
are you in a cage?
you dont have anywhere to play with enough room to stretch your arms out?
No 😔
I’m a Cuban slave trade victim brother
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Damn
Based on space contraints... a Mid-split Mag style would likely be best and keep things pretty contained/less chance of smacking a wall or other such item
IS A single point sling better then a 2 pint
2 points can always be converted to 1 point. they tend to be a little longer
where should i get the sling from anyone got a sling
Ok ok 👌🏽 will look into that then
hows the wield vr onestock
wanting to get a gun stock but not sure which one budget of 100 bucks any thoughts?
Smartstock, i own it, i think its great and its in your budget
If you have any questions feel free to ask
imma look at it now i was just on amazon looking at random ones and had no idea what was good or not lol
Lol get off amazon its only crap on there
hahah im new to vr played alot last year now im getting back into it i was an apex streamer for the years lol i like this gun stock though thanks imma order it now
You can use discount code SKOLVR5 for 5% off
thanks and magnetic one is the one i want right not nonmagnetic
yeah i have magnetic
using my cardboard gunstock 💯
What stock does scopeog use?
protube
Ok
thats what I use and its great
Does anyone have a gunstock recommendations for quest 2
ive got the Tomahawk by Skol VR and its a game changer, it can be converted from rifle to SMG to handgun in seconds while playing and never miss a beat. i feel like its a huge advantage.
Same !
I’m getting the cgrip I don’t think it comes with a sling
What gunstock should I get for 30-40 dollars with sling
best bet is probably amazon
but atp you can make one just as good/better
are you getting the one from etsy?
Is it compatible with a sling? Usually ones made to work with slings have them
I think
Yea
@open ether if you’re willing to spend a bit more you can get the glistco magni stock vr
they’re on sale rn for $50
People in review have the sling on
@rich ether I saw one on eBay for 35
I prob just get the c grip
Where should I get a sling from and can someone send a link
Nvm found some slings on a Gym bag
@rich ether @royal wagon do I get the tabor mod on the cgrip
!gunstock
not familiar, not sure why tabor needs a mod
The sight is slanted to the right diagonal my
yo why do only some sights work with gunstock
they all work
you probably need to learn more about gunstocks and use the gunstock calibration, check the detailed pinned guide in this channel
Because of the console fr
The quest standalone sights are just buns
!gunstock
!gunstock
I ain’t workin rn
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
It’s gunstocks ok thx
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Is there any other magnetic stock that isn’t 150 bucks
There are multiple in the list @mossy aurora 😉
😏 say less (it might be a bit of ways down more huh)
@mossy aurora
Ultistock by BrandoDrumVR $50-$80 [USA, but can ship WW]
-3D printed
-Fully Modular and customizable
-Unique Forearm Grip design
https://www.etsy.com/shop/BrandoDrumVR
Tomahawk or Butcher by SKOLVR $37-$223 [Germany, but can ship WW]
-Cool fold out design
-Cool skeletonized design
-3D Printed, sturdy
-Custom attachments (Butcher)
https://skolvr.com/
ExoStock by MrTass $50 to $80 [USA, but can ship WW]
-Mid-Split Single Mag Design w/ Knuckle Grips for Quest 1, 2, 3/s, & Pro
-Light Weight, Balanced, and Multiple Configuration Options
-Designed to Loot 'n Shoot as a seamless extension
-Quick Shipping
https://mrtass3dprintshop.etsy.com/listing/1738349097
The only one that says mag is the bottom one but thanks man 🙏(hooking me up ong)
I think Ultistock has a mag option, but not 100%
SkolVR has the SmartStock in a Mag Option that could work.
I have/make the ExoStock
You could also check out the Asset by OlenVR SBS Edition
👌🏾
Bet
!gunstocks Here's a good list of em.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
oki
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
which one? stl? url? 🙂
Protube was but there is no more black friday discount
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
We also have the Starter which is much cheaper
Also our sale is still going through Dec 6th 💪 (So MagTube is still well under $150 usd)
is there a big difference between magtubes adjustable stock and static stock anyone know
adjustable can height adjust the shoulder stock to always have good cheek weld, and allows much more freedom in how you set it up and align to guns in games
will it matter much tho depending on which one i get
outside of that no
alr thanks
if your headset is inside out tracking, adjustable mk2 is recommended, to better ensure optimal tracking visibility for headset to controllers
Unfortunate maybe next year
Read above, our sale is still going on 💪
Bet
Pro tubes do be looking like the best option fr
Ragesaq has good setup to reference for it in tabor as well
Is this any good?
Also it doesn't come with a sling how am I supposed to loot in tabor?
your mid controller stays in the holder and the front one releases with a magnet freeing your hand. There a video on the items page that shows you how it's used!
Yes i own it
Anyone wanna go kitted have to be on oculus 1 person needed
To Access LFG / Trading: https://discord.com/channels/949081704625209404/1196523375355494471
Once you have access to LFG / Trading: https://discord.com/channels/949081704625209404/1084149169482109058
Group Finder Channels include all trading activities.
what gun stock u guys recommend?
What's your budget
is gonna be 4 my christmas but i’d say like $150 or less i don’t wanna go all out just on a gunstock
I'd reccomend getting the butcher. You can use discount code SKOLVR5 for 5% off. You can check here for other options
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
does anyone have the link for how to install the new parts for the tabor raidr stock
I have the magtube carbon I got it on Black Friday you’d have to see what it is now though
What’s budget to you
£50-70
I’ve heard good about the c grip vr stock and the smart stock by skol vr in that price range
Ok I will check it out
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
is it any good
Magtube is best on the market rn imo
Magtube is the stock I use and its great and very customizable. Its my favorite rn
150€ aprox
Nothing is better than magtube u can adjust any weapon in any game without using menus
Of course if u buy extra mount and mk2 buttstock
But in the beginning is hard to assemble each controller every time u can move it. It Will take few weeks to understand how to know by muscle memory
Very
I can sell you a mag tube quest 2 mk 2 buttstock I won it in scope og’s giveaway a few months ago I’ll sell for $100
Guys, how do you apply the gun skins? I never did it once.
wrong channel
Which vr gunstock should i buy?
protube
Ok
Tomahawk
yo what should i buy i got a budget of like 60$ im on quest 2
I have a Magnetic Grip option. Yup, quite enjoyable if you want the best of both worlds.
Just shop from the Magnigrip Combos listing here:
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
damn it 9 more days till my protube comes
Is a gunstock actually worth it
yes
I got a cheap one of amazon to try out a gunstock and it did help me steady my aim. Altough it is hard to use when not used to it. But this cheap one has made me consider getting a proper one
What is a good gun stock for 30 dollars free shipping and I can move my controllers fast
Guys how do i use the offical ghost of tabor gunstock off the website it came today but i dont know how to build it?
Guys?
3D Printed haha
the QuickAims I make are about as close as you can get to price and freedom of hands
You just want me to get yours
!gunstocks - Nope you can get whatever works out best for you
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Guys how do i use the offical ghost of tabor gunstock off the website it came today but i dont know how to build it?
That I don't know/have :/
Its like impossible to set it up
There should be a guide or instructions for Raidr
Fr
Its bouta make me cry
I have been struggling with this for a hour and a half now
there are some qrcode links to videos
what's the best gunstock (in yalls opinion) for around 50 bucks?
thank you
I own the smartstock it’s great, if you have any questions feel free to ask
You can also use discount code SKOLVR5 for 5% off
!stats
Can you some ping the calibration video in this chat
click the pins, its the second one
Thank you
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Do y'all have a good way to line up you controllers on your gun stock maybe I'm overthinking it because I'm new to it but I feel like it's not lined up right
Check the pins in this channel for a guide on how to use the gunstock calibration system
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
@thick hatch how does it connect does it have a magnet or a lock in system
Hey there.
Did you mean to tag @vague basalt ?
I’m talking about your gunstock you make
That’s you right?
ah gotcha 😉
It is a Mid-split Mag style
Oh, thank you for telling me I was confused for a second
The goal is to be there when you need it without interfering when you don't.
Built-in Knuckle Grips and a pretty even/balanced split... vs some only detach the front controller vs splitting the stock in two
take a look at one of the videos posted in the guide, its made for a magtube style stock but its less about a specific configuration and more about how and why you want to have a stock shaped the way you do
On a scale of 1/10 how much damage can the exo stock take because I don’t know much about 3d printed things in general
@thick hatch
@royal wagon thank you I'll look into it
beyond that, you'll need to get a lot more specific with what you are asking and what you plan on trying to use
3D printed strength depends on the maker and material and orientation.. Wall strength and infill.
A Lot goes in to making something sturday and size isn't a clear indicator of strength.
All that being said the only one that has ever full busted to piece (that I am aware of) was being used as a sledge hammer in a game and met with a desk/shelf 5 times before it busted.
Is it indestructible... no, but will it be fine under normal wear and tear to an occasionally wall bump. Yep.
If there are ever any issues though, let me know and I will do what I can to help or address them.
Nearly all of the gunstocks are 3D printed.
Although the VR Tactical Gear Armory-R1 by @viscid kindle is injection molded, but currently on pre-order with target shipping around Christmas.
Thank you for your detailed response and description of the quality, I am really looking forward for mine to come in! 😁
Let me know if you have any other questions at anytime! 😉
Alright man
What gun stock does scope use?
protube magtube, best on the market rn
anyone else have a problem with their gun stock with grip attachments? i have the Cgrip (I've been in contact with the creator also) where without any attachments the gun grips just fine but as soon as a grip gets put on it pulls the gun to the right? I've gone through and configured the weapons many times and the same problem still occurs and I've also filled out a #🐛・bug-reports as well
Your physical stock's forward hand isn't canted correctly. Idk if cgrip has a rotation adjustment on the forward hand, but if it doesn't, you just have to deal with it or get a magtube
Anyone wills to give me a free gun stock
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
!gunstocks - unlikely, but there are plenty of ways to make one yourself with some coat hangers and toilet paper rolls
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
i printed the v.s.t.o.c.k one - having some issues with it. couldn't be arsed anymore - ordered vskol yesterday.
Plenty of options out there.
I have a non-mag version of my ExoStock if interested in checking it out.
are you by chance right handed and using the angled grip? if yes, use the shift foregrip if yi ucant fix rotation of front hand
Right handed for shooting hand yes, and I love how everyone just jumps for the "simple" check the calibration channel and stuff when I've done that and even have followed the calibration guide from Cgrip himself and nothing works,, ig ima just get use to it😅
What is the best gun stock
Tomahawk in my opinion
163 is crazy for a stock
You asked for the best
I mean fair
If you are on a budget the smartstock is really good
I own both the Tomahawk and smartstock
Gay
What do you think is good then
Protube magtube
Best on the market rn
Prefer under 100 bucks
!gunstocks - most comprehensive list with prices, features, etc of vetted and verified gunstock options. Let me/us know if you have any questions.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Is the olen gun stock good
Olen has a few stocks, all quality made. The asset is his latest. I don't have one, but I know @fervent socket does and may be able to weigh in
I have same issue with my c grip
Anyone tried the Kobra vr blitzer on Etsy yet for £65 great British pounds
Bargain
How did you fix it, or learn to play with it?
Lowkey I just turn physical gunstock on them just make small tweaks with what gun im running
The VRX-15 gunstock by elvish tac is severely underrated.
nah, it seems appropriately rated. thats a lot of jank
Nah ive been using it for over a year. It helped me get into competitive pavlov tournaments and such. I get a lot of 20 bombs. And on tabor in an island raid I average atleast 4 kills a raid.
lots of places to snag on things, lots of things that will yield inconsistent adjustments, little value add over other better designs
🔒 This channel is locked momentarily. Please visit #💬・general-chat !
.
www.tiktok.com/@liability.vr I am doing a huge giveaway and multiple all day long go to my tt to enter
sorry I was confused what you meant
no you need to buy the straps seperate
for the controllers right?
Ohh the sling
Yes it comes with the stock
mb
These are the one and two point back slings
no you get to choose one
but the two point one costs a bit more
Its right above add to cart on the website
it says sling
on the images I sent, yes
did you find It?
ok good
I made one with a nerf gun but it hurts and it’s super heavy
im gonna need multiple opinions 😭🙏
ok its broken
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
is it just gonna be biased because they sponsor a gunstock company
that 2 point can also be used as a 1 point
Yeah that's why when I bought mine I went for the 2 point
you can also buy it on amazon for 9.99 rn also
so if i want a good stock im pretty much just buying a new Quest 2
i can either get a new Q2, save a little more for a Q3s or buy a rod with some magnets
I think until in game calibration is a bit better an expensive gunstock isn’t worth it but depends on how much you play and everything
my main issue with tabor was how bad my aim was because of my shaky hands
Weird take
so getting a stock might help a lot
idk about that
The point of buying a good gunstock is that you can adapt it to your body no matter what the game does
Yea I mean I have the mag tube full carbon and love it I just really struggle with the calibration in game that’s all
so will a gun stock help with my shaky hands??
And a games gunstock calibration system is meant to adapt the games default offsets to work with your gunstock
I dont even use the in game calibration
Read the pinned guide on how to use the gunstock calibration system.
probably
You don’t have to but it’s far better to do so
Almost all people who don’t just generally don’t know about optimal shooting ergonomics
im ngl, I didnt find it very useful
Reading generally helps
I will I got it pretty good but I start to struggle as I’m switching attachments
ik, i figured it out by myself
Why are you switching attachments rapidly?
it takes time sometimes to make things feel normal again
You can run a calibration in like, 5-10 seconds
Depends what guns I’m running I might wanna change the fore grip or sight depending on the situation
Do you need to switch attachments more frequently than that?
I think once I give it like two more weeks or so I’ll be a lot more confident
There’s only two foregrip shapes. Why are you changing foregrips so much?
Tier1-6 foregrips have the same shape
The t7 is different.
Im just picky with how I like everything to line up so I change it a lot but im definitely getting more confident
Be picky about using the right parts and learn how to do a calibration
There are only two possible grip calibrations, and the performance of the grips are heirarchal. So there are only two grips that matter, and with a gunstock you don’t want to use the t7 so it’s a complete nonissue
Use the shift grip, it’s the t6 and the best one for a gunstock
There, you do to need to change anything again
I will thank you for the tips
What's the best gun stock to use? Is it even worth getting one?
get one on amazon for like $30 and once you get the hang of it youll be OP like the rest of us
Yall know if the cgrip is good or na?
Vr gunstock is more shit than shit
Huh
It's not very good. Not great adjustment
Got any recommendations?
Protube's magtube
Got any like $50 recommendations
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
SKOL's smartstock is decent
Made my own gun stock out of a nerf gun
Check out the Ultistock. Much cheaper than protube.
!calibration
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
@pearl yacht
get the ultistock its so much cheaper
!gunstocks - it is on this list and has been vetted and validated as worthwhile 😉
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Is the magni+ any good
Not really
anyone recommend a gunstock australian dollars $50 and below
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
SKOL's smartstock isn't bad
Someone help this guy
#❓・questions message
Go to SKOL's website and run the number through a currency calculator
Anyone down to run kitted pistols
Any map
Any age
Any kit
!lfg
To Access LFG / Trading: https://discord.com/channels/949081704625209404/1196523375355494471
Once you have access to LFG / Trading: https://discord.com/channels/949081704625209404/1084149169482109058
Group Finder Channels include all trading activities.
No one is answering on trading just wanted to see if anyone was down to play
Wait until someone answers then. Don't put it here
Smartstock you can use discount code SKOLVR5 for 5% off
Does anyone have recommendations for an quest 3 gunstock under 50 USD?
Thx
!gunstock
LuckOfTheIrish Magtube Gunstock out soon 👀 🍀 with that four leaf clover charm 🔥
I had it not my favorite but it’ll get the job done
I just didn’t like there was no adjustments to the stock at all so I just saved up and bought the magtube worth every cent
Does someone know if the SPINE by olenvr is any good?
dependable, solid, and been a round for a long while.
Although top mount can have more concerns with tracking issues.
! Gun stock
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Thanks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
there are multiple choices ;)
Just a shout out to the Ultistock! Never enter a VR shooter without it!
literally 2 posts above haha
Besides price, which is better the cgrip stock or the skolvr non magnetic smart stock?
Does anyone have a good but affordable gunstock
!wipe
Looking for wipe information?
You can find everything to know about wipe information in the https://discord.com/channels/949081704625209404/1299082218056061018 channel!
Where can I find information as it comes out?
You can select the Announcements & Patches role in https://discord.com/channels/949081704625209404/972852619120894063
!gunstocks - all price points and all vetted good options
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
witch is the best one
anyone know a cheap but good gunstock for a quest 2? preferably under 80$
What is a good under 100$ option (that’s on Amazon)(for quest 2)
any protubevr reps in here? got a question
i bought a gunstock it was way too big and bulky idk were to buy from now
wouldnt it be better heavier?
Ultistock is on Etsy. Better than stuff in amazon and well under 100. Got mine in less than 5 days if I remember correctly.
Is virtual gunstock worth using
Lots of people use it to good effect. Good stock is better though.
Would you recommend getting a real one for Christmas?
I can only get Amazon bc my aunt is giving me a visa giftcard and my parents literally only buy stuff off of Amazon,Walmart,target and everything else is going to scam us (little did they know it won’t)
Ok. Gotcha
What is a good under 100$ option (that’s on Amazon)(for quest 2)
Hello everyone I’m recently getting a quest 3 for Christmas and I’m a big fan of ghost of Tabor I was curious what are some goood options when it comes to gun stocks
what gunstocks good for quest 3
Protube magtube
^ too
which one of their gunstocks would be best for tabor
guys please tell me if i get my gunstock i will get a better aim 😄 its a really good game a i love tarkov and in vr its insanely good and hard (ProtubeVR fro 50 bucks second hand without magtube)
The magtube with a MK2 stock in full carbon fiber is the BEST, but the MK1 stock is fine
alr thanks
It will help steady your aim, so yes, but it won't help you with the ballistics side of aiming (velocity, etc)
for now if its make my aim steady and better its a half succes for me
in air shoot its crazy soo hard
my two hand never get a right point
Then it'll help for sure. It may take a bit to get used to, but eventually it'll become natural
and the mk1 also come natural if i training myself (it will doesnt have a magnetic part just regular old mk1 stocks)
? 🙂
Yeah, I use the Mk1 still
ooo thats sounds goooood
I highly recommend buying the carbon fiber tubes from protube's website as well as it reduces weight quite a bit
i will test this out and if its good and make me better in game i will upgrade instantly!
i hope they shipping in EU
Protube is stationed in france, so EU should be no problem
ok ok ok thats new to me 🙂 its a great news!
Expect it to take a few days to get used to the motion, but after that its smooth sailing
soo cool this game but also its soo hard 😄
in air aiming its inasne and everybody just kill me always
cant take that reaction
You'll get better over time
they are too fast
!boa can help you out
The "Battlefield Observation & Awareness" program is a community maintained program to assist players in learning game mechanics.
Join the BOA Hub Discord!!
https://discord.gg/taborboahub
Is this a good gunstock I’m trying to buy my first gunstock under 100$ and only Ana Amazon
In that price range, I'd recommend SKOL's stocks over that. If you want that style of stock, get a magtube
Is that on Amazon that’s really the only site I can use for buying one?
I don't think so sadly. I don't recommend buying a stock from amazon at all. If it's amazon credit, get smth else that you want
SKOL is an absolute best for me but i cant get for now im lucky to get protube in a few days
and fukkin expesnive btw LOL
Nah my aunt is giving me a 100$ visa gift card but my parents are those skeptical people who only trust Amazon sooo
Ah. Out of luck then, sorry man
Yea I really want a gunstock and like this is my only chance no other like extras I need or want so ima keep lookin
Question what are like some key features when looking for a gunstock
Adjustment points, you want as many as you can. Magtube is the best option because of that
What's the best gunstock
Protube magtube
can you show us your protube 🙂 ?
Alr thanks
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I have a magtube and an ultistock. The ulti is my go-to and less than half the cost. I love having the stock in hand at all times and it’s super lightweight
All vetted and worthwhile at all price points and styles. Let me know if there are any questions
greaaaat
Would this be considered more of like competitive or a toy
Looking for a cheap gunstock what is the best one my budget is around 80 dollars
Get the skol vr smartstock unmagnetic for around 60 or the magnetic just don’t know how much
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
There's plenty of options on this list ^
Should I get it? As my first gunstock I only have Amazon as my choice
No mk2 buttstock??? Why??
I’m getting cgrip it’s abt to arrive
I haven't bothered upgrading it yet. 3rd base station and some other software things are needed more
Just thought id inform you guys Mamut VR is runing a sale on its apto wasp just so you know
Best cheap vr stock?
Just got a quest 3 and need to buy a headstrap but a stock would also be nice
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
olenVR asset sbs
Smartstock
I reccomend first geting a strap
Is the one stock a good purchase?
not really
way to overpriced for what you get
@astral kiln then what would be?
im a huge fan of the Stocks from SkolVR
Alright I will be sure to check them out thank you.
np 👍
Is the Onestock worth?
still not really
Does anyone have the lopro because some reason to me it feels like the gun is like tilted a bit to the left whenever i use it
It has it quarks with Tabor just as a fair warning lol
ngl a coat hanger is good for a gunstock tbh
it could be used but it can break mad easy unless u dont have the plastic ones and it would be kinda hard to set it up homemae
(homemade)
i found one in my closet and it’s pretty hard i had to use a saw to cut off that curve part that hangs it
Whats the best gun stock for quest 3
id say the pro tube
its very trusted and prob best on the market but its kinda expensive
but if you cant do that theres a entire list
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
why is the ghost of tabor gunstock calibvration so difficult and can anyone help me out with it
simple dont use it
its pretty easy, if you have trouble you should try following the guide pinned in this channel
Things I’ve seen people forget
-SKS calibration is bolt action
-turn ON physical gunstock
-alter the gunstock to work with rifles with calibration off first to set up the gunstock for GoT
anyone got pulsar quickbrace
Best stock
hi gunstock people
what’s the best gunstock rn
protube magtube
Made this in like 20 mins and it works great
how do i get a tabor gunstock? the raidr one
On the tabor shop site, but I dont recommend getting one
do yall recomend me to buy a gunstock?
yes
Get the istock it is good
so many better options for similar price points... actual full gunstocks.
But it is still really good and it is like 15$
Is that the Smartstock?
Did they lower the price? Used to be $40 or so
i got a gunstock off etsy, i hope i don’t get scammed
arrives sometime next week hopefully
Just use paper to build it
im not a home depot person so im not creative
I see
Epic
nice
It will also survive for 20 min. 😂
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Gets used for the same thing, doesnt matter imo
Yea
Looks like squeaky plastic though
I can only do Amazon do you have any suggestions
I don't use any due to VG, i also have 14 years of shooting experience which ties into it.
So no recommendations. people say the Protube Magtube is great though.
Unfortunately it’s not on Amazon T_T
Stupid amazon at it again i see.
You could always watch videos on "OMG THE BEST VR GUNSTOCKS IN 2024 CONFIRMED!!!!"
Probably a great alternative than buying a possible piece of junk 
took me around half hour to do it but its metal coathamgers
I just bought this like 2 days ago it’ll be at my house today
If it’s any good I’ll lyk🤣🤞🏼
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
best gunstock for under $100?
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I’d say the smartstock
Hey Gus I have a Pico 4 headset do you suggest a good gunstock compatible for me?
Is the olen vr stock good
anyone got a clue on how the weapon calibration works cant seem to get it right at all with my gunstock
Did it ever come in?
Yes it did it’s actually pretty solid
Does it squeak or anything
It’s fully adjustable I’ve been having a lot more fun the past hour than I have ina minute lmao
No squeaking or anything like that the only thing I don’t like is the shoulder strap
lol Alr looks like that’s the one ima get after Christmas
Do the controllers come out of it easily?
For 55 bucks I think it’s worth it for sure
Yeah they do you have to take the safety strings out obviously but it’s smooth
The left controller has a magnetic adapter piece that just pops on an off as well so you don’t have to keep sliding the controller in an out everytime your not holding your weapon
I want gunstock gun stock cost money I don’t have money I can’t get gun stock I now am sad
real
What should I buy it needs to be good tho
What one you want??
One that scope uses
And that is??
He uses a fully carbon magtube
And suggestions for a gunstock to suit my needs?
I already have a gunstock for my pcvr set up but I'm interested in adding one to my standalone set up. I'm currently using the quest 3 and ideally want a gunstock that I can use to snipe and go prone with but is also allows for efficient reloading and weapon swapping. Any and all suggestions are insanely helpful, thanks! (sorry for the long msg but I'm desperate atp)
A gunstock with a bipod so meaning going prone ?
Not really, just one that would be comfortable using while in the prone position
Not really a wide range of gunstocks that will be comfortable when prone
If you want something smaller and more compact, easy reloads ect. I suggest the smartstock
I own it
As long as it's usable while prone. I don't expect it feel like a pillow lol, just usable and not crap
Haven’t really used it in prone but it’s really comfortable
Noted, I'll check it out
Does the place I buy it from do returns if I end up not liking it?
Full carbon Magtube but skip the bipod and going prone, there don’t currently exist games that can take advantage of such things
How expensive is it, I'd like to save some money lol
I forgot to put that in the original message
Save money from only buying one stock instead of two or more down the road?
Pretty sure there’s a 30 day return policy
There’s a few ways to look at the cost
You might want to check that for yourself
It's complicated why I need two- 😭
Gotcha, I'll make sure to check it out before hand
Well, you can buy a cheap one you might not like, which might lead you to buying another one, which makes the first one not so cheap
If you have any other questions feel free to ask
Gotcha, thanks
You can use discount code SKOLVR5 for 5% off
Magtube starts at 120€ I’m pretty sure
If it's euros does that mean I can't get it here in the us or can I still pay with usd?
They ship from France with DHL express
So there shouldn’t be any problems
Full carbon is about 200
Literally that and strong magnets
Yeah ofc
I was looking on the website and I just wanted to know if the magnetic or non-magnetic is better/smoother and which one would be more bang for my buck
I personally own the magnetic one
Pretty smooth connect and disconnect
The non magnetic one should be good too just without magnets
The non-magnetic uses velcrow right?
Strap ?
For the connection
Like magnetic connects your controllers with magnets and the non-magnetic is velcrow, right?
Or am I dyslexix or sum :/
Hm i only have magnetic one so can’t answer that…
I should probably read on the website then
Or i can invite you to the official Skolvr discord and you can ask the maker directly there
Thanks but I'm fine, I'll figure it out
The magnetic one seems more bang for my buck so far tho
I like magnetic gunstocks so can’t agree more
Okay so there is a cup-like thing your non-dominant controller goes in and the magnetic has magnets on it which you slide downwards to disconnect and the non-magnetic I'm assuming is just a slide on/off
That's my theory
I didn't realize he was in the server
!gunstocks - @blissful ravine
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Hello, friend. Magnetic has 2 long magnets, NONmagnetic has opened cup to put there controller. I have video with everything shown:
https://youtu.be/Q3FSWacSLh0
And I have shown it in Tabor too:
https://youtu.be/-aKZGCwOcg0
Added you as a friend, ask anything freely. Always at your service.🙏
Thank you very much! I've been wanting to add a gunstock to my standalone experience for quite a while now for that extra immersion and stability. I read about your product on the website and it seems very high quality and the price is very affordable. I'll definitely watch these videos and see if it's the right one for me. Thanks again and happy holidays!
Does the forcetube haptic stock work on ghost of tabor
Only on pc using our steamvr companion app, when the game is running in openvr.
Otherwise, not until the game devs fix it again.
Bet thank you
HOW DID U MAKE THAT
Whattt
Fantastic ingenuity
anyone have a good idea budget like 35€
i'm trying to desging my own vr gunstock and 3d printing it buy how do i make the controller mounts
thanks you
!gunstock
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
help.... the cameras are in my skin.....watching
Anyone know a good pair of earbuds to use? Ones that are a lot better than the oculus speakers at least
PrismXR Vega T1 are USB c adapter and Bluetooth option @stiff steeple
Has anyone made like a gunstock teir list
Looking for one to get myself for Christmas
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Nvm thanks Ceps
What stock should I get
Ok
!gunstocks - pretty much all the same drop shipper cheap quality... see the reviews/stars...
Better to pick something from the list here.
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I got the glistco it's pretty good made me qol much better
The question is durability/life of it more so than function.
I mean, it should be good for me. I treat my things well; it seems very durable for what it is. The magnets are strong and the stock is light. I got mine for $25 on sale during Prime Day.
Are there any good gun stocks anybody wold recommend
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
whats the cheapest but best for quest 2, that has magnetic connections for the controllers and has a sling
magnets arent always the best
There are mag and non-mag options and slings are not needed if the stock never has to leave your hands 😉
I was never good at using my old gunstock I had with magnets, would always funble and die. thats not to say that you can't get used to it. i'm just bad lol
Ah ok I just want to get the magnetic one because it just simpler for me to connect and the sling in case i use both my hands to do something
again... a sling is only needed if you have to drop the main portion of the stock to free up your hands. There are design options where the stock never needs to leave your hands and they can still be free to loot and move. 😉
That's true but would still like a sling lol, personal preference..
I modded my Ultistock with a sling but I don’t have to take it off in raid but I can take the controller off it while in bunker
Looking for a budget gunstock, saw CGrip, is it any good?
yes
ngl i made one out of cardboard
show us man
Now with the controllers in
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
ah yea, @sterile skiff
Yeah I thought so
Does anyone have a good gunstock with a strap and under like 150 USD that is good
Ime and my friend need help can 4 people please dm me to help
Anyone know a good pair of earbuds that are a lot better than quest speakers?
Good gunstock for ghost of tabor for quest3?
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Is the mag tube good?
Best gunstock on the market rn imo
What for tabor,
For every game
And it’s 107£ right?
I basically only play tabor
Idk the price in euros
It has the best adjustment and best quality
oh right
Still haven't a clue, but you can find it on the protube site
Can you still use the Rk angled grip?
Yep, just have to angle the forward hand outward
This it?
Wdym
Yes. I highly recommend getting it in full carbon fiber
^^^^^^^^
forward hand is slightly outward/inward
Oh you can adjust itv
Why?
Personally I would just use the shift. The stats are nearly the same and you can get a more ergonomic natural alignment
Lighter and less tracking issues
How do you use that on a stock?
Fair but adds like 35£
And I need to get a quest 3
How do you use shifts with stocks?
You can always get the base stock and upgrade to carbon later too
Yeah, do you know how to use the shift grips with the stock?
you dont really do anything, the shift grip is a straight grip, so the natural straight gun alignment is used
But isn’t the controller holder on top not on the bottom?
correct, that doesnt have anything to do with anything like that though
Or is that why u adjust the ingame setting?
see above statement
Oh so you can just hold grip and it Will instantly work
And also how much calibration in game is needed with the mag tube stock?
this works a lot easier than you are imagining
!calibrate
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
Yeah
i do a gunstock calibration and then a game calibration to make it match my gunstock. its quite easy
you want to do both so that you get optimal ergonomics for your body, it makes a big difference in speed, accuracy and ease of use
anyone who says "my stock doesnt need gunstock calibration" probably just doesnt know what optimal ergonomics are
the default offsets in this game are not great, guns are pushed significantly forwards compared to where your controller is
Okay thanks. How long does it take to calibrate guns in the game?
5-10 seconds
Do y’all know what gunstock alpha bros uses
Currently it's SKOLvr's smartstock
It used to be SKOLvr's tomahawk
And before that was the protube magtube
Thank you
Oh so it’s very very easy
yes
Even first time with a stock?
follow the directions, its pretty easy
I got the raidr gunstock but I hate it
The raidr is pretty trash
Yes I can confirm
Thank you for all the help I really appreciate and @tardy kayak . Thank you.
When I get the gunstock I might ask some more questions but idk if you will see them once again thank you so much for your guys’ help.
I'm surprised they still sell it tbh
Should’ve came here before I got it
What's a really good gun stock I should get for Christmas?
protube magtube
what do you use?
can anyone recomend a magnet gunstock (with buttstock)
tabor one is fya fya
protube magtube
^ magtube too
I'm getting a gunstock for Christmas I just wanted to know if they are hard to calibrate
I have no experience with gunstocks at all
got mine ordered
!calibrate its super easy
The following message by Ragesaq is a thorough guide on calibrating a gunstock!
awesome
does any body know where i could get a good quality gunstock
skolvr and protube are the big gunstock companies for ghosts of tabor rn imo
okay thanks
!gunstocks - lots of option available 😉
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
What is a good but cheap gunstock
see one post above... prices are listed and all are vetted... so if one qualifies as "cheap" for and the features you want, should be gtg
Thanks
What is a good gun stock I could get
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
Yuhhh
Tomahawk
Any of you guys ever heard or tried butcher gunstock?
Is it any good? I’m new and looking for a good gunstock
I have the Tomahawk and smartstock
Tomahawk is kind of similar to the butcher
Its good
Is the tomahawk better then the butcher you think?
It does have a foldable stock right?
Yes
Yes
I can fold it in less than a second
very useful when switching weapons
Yeah that’s what I was thinking of looks very well designed to bad the only have they red edition in stock right know but I’ll give it a try
Do you use a sling if so which one?
You could use a sling yeah. i ordered a cheap one off amazon
But the stock is light so its not needed
If you really want a sling get a 2 point one on amazon
Thanks
You can use discount code SKOLVR5 for 5% off the Tomahawk
Feel free to message the maker @mental lance im sure he can add the normal tomahawk in stock for you
Thanks for the code
I do like the red I’m gonna go with that
nice ! I have the red one as well
nice...
a
Hell yeah
i need a stock can sm1 gimme some recommendations
what's your budget ?
eh idk 70 euros
Check out the smartstock
okey
You can use discount code SKOLVR5 for 5% off
hmuch is it
and let me know if you have any questions. i own it
Theres a non magnetic and magnetic version
Starts at 38 usd
!gunstocks
User Ceps made a giant list of reliable gunstocks for use in Ghosts of Tabor!
I've got a couple of questions about vr gun stock's