#🔨modded-gamma-support
1 messages · Page 319 of 1
Brothers, what the fuck do I do if im GPU restricted. I got my ass on 100% GPU load, but 30% gpu load on affected cores
I got told I can snowify my game with INVERNO (grass-less) and I did
that helped, but it's still not enough, what mods cause the GPU to tweak the most
Limit your FPS if you haven’t
I have
tbh the best I can do is go from 1440p to 1080p, but then the game will look jagged cuz of the 2k monitor
Hello everyone, there is a question, does anyone know how to fix the lighting of the reeds? You can see that where the light falls on the reeds, they have a normal texture. This problem exists only in Atmospherics 2.68.94. Beta, on the standard version 2.68.93 the reeds are normally illuminated. I also can't adjust the shadows properly, as in the video with the Beta version. With "grass shadows" enabled in Anomaly and any "shadow cascades" settings in SSS, grass shadows are pixelated and FPS drops. If you turn off the shadows in anomaly, then they are normal, or if you set them to the "minimum - Anomaly standard" in MCM, then they are also normal, but not the same as in the video. Even with the standard set of mods and Atmospherics like that. Maybe someone can tell me?
I think https://discord.com/channels/912320241713958912/1036172060969410590 would be a better place to ask bout this
Weapon sight unaligned for akms
For some reason, I can't write anything in the fashion group.
can anyone help me with this
Does anyone know where to download KVMAS Azetrix Merge Models for Gamma?
!hdmodels
@red sequoia
Remove the NEWCOMER role to access the link - https://discord.com/channels/912320241713958912/1029827096488452137
You have two options, do NOT install both, choose only one:
Thanks. Do they Both require a fresh playthrough?
!redone
@cedar current
If you are using RE:DONE mods, please read the [comprehensive guide](#🔨modded-gamma-support message). We strongly recommend thoroughly reviewing this guide, as our support channels are primarily dedicated to G.A.M.M.A. issues. While we can offer some general assistance, specific support for RE:DONE-related issues will be limited, and you will often be directed back to the guide or its authors for detailed support.
does anyone knows a fix tfor that, i already deleted all my shader chache, the only things i did to my game is i enabled mags and installed the blackroad mod and looting takes time.
Everything worked yesterday
have anybody experinced this before? i also cant attach scopes to the gun
it says that it can't find an Item. At least if I read the error correctly
enable pre 094 fix in MO2
Help what does this mean?
!aoe
@snow magnet
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
!094 / yes
@novel tulip
If you're experiencing crashes after updating G.A.M.M.A. from version 0.9.3.1 to 0.9.4, open MO2, locate and enable this mod:
Pre-0.9.4 Saves Fix, inside the Alternative Addons & Patches category.
If you don't have REDONE mods, this "fix" is only a temporary solution. Starting a new game is highly recommended.
If you have, keep this enabled, it is required for REDONE in GAMMA
What is the problem?
ads is very misaligned as it seems. and i cant attach scopes that are compatiple with it
i am not sure from which mod this gun is. but its name is A-545
sorry didnt see it clearly on my phone. screenshot the icon and maybe i can tell you which mod
ofc bro. sorry for responding late
aek kit
you need aek kit reanimation
tho i didnt quite get how it works, cuz aek kit reanimation already has aeks and having 2 versions at once crashes your game
i already have the aek reanimation kit
do i need a patch?
do you have original aek kit?
yessir
disable original aek kit and place aek kit reanimation below everything
nope. still holds it like a gangsta
thx for trying tho
sure are there a easy way to do it?
export csv
yeah i'll probably just ditch the mod. thank you very much for trying to help. u are the goat
🥺
just got a crash no error message the game just shut down when saving
Quick question, sorry if this is the wrong channel for it.
I want to install Arrival anomalies, but it says it requires demonized modified Exe's, whatever those are, do i need to do that or is it included in Gamma?
And, is it compatible with existing saves?
Plus, how do i tell if it conflicts with my other custom mods / has the right priority?
What is your character name?
nilrem ambrosius
keeping arrival around the end of modlist is fine, you already have modded exes in your gamma
basically everything below overwrites everything above
you can load your save with arrival but need to delete older anomalies from DAO
from your current save
so i just delete this?
Right, i need to remove the old anomalies first, i misread
How do i enable debug mode?
read arrival moddb description
!debug
@zinc vortex How to enable debug mode: #╭📖faq message
Yeah, my bad, i misread ^
And thank you ❤️
🥺
Hi, before I make a fool of myself, where would one ask a question when something like underbarrel launchers don't work. Is this the right channel for stuff like this?
i dont really know why you guys regularly have issues with ubgl, i just binded it and it works
#🔨modded-gamma-support message mb this help you figure out this
will give it a look ty :3
you can do that in console anyway
ok it is probably because of modded exes ty I did update them
One more thing, it says
Go to another area, just walk until you leave the area you are in right now
Does that mean change the map (to trigger a loading screen?)
yeah
okee
never had the issue after moddedexes update
welp gonna see if it fixes it for me tho :)
Read what I send, I don't understand what they saying, but its probably useful for you because you smarter
whats there to not understand smh...
I don't read this
So i enabled debug mode, enabled the 3 settings to remove anomalies and save, walked from Army warehouses to Garbage loading zone, and the game crashes when it is supposed to trigger the loading screen.
It seems to make two saves though?
does it load on dao tempsave
it seems to freeze
sorry to ping, but I'm currently experiencing this. what did you do to fix it?
or you can just start a new save
Eeeh
It worked now, so no idea what it was
Anyways, thank you so much for the help again!
🥺
i tried the magazines mod, didnt like it, tried to revert it and my reload key is broken. I uninstalled and reinstalled again, but the reload key is still not there
on default gamma, unjam key is reload key
so in the keybinds, it just says unjam even though it does both?
maybe its nothing, i had a really bad svd and it seemed to jam and pressing r wasnt doing anything
yes in keybinds its the same key
i just tested reloading regularly and it worked, guess im just seeing ghosts from my experience installing yesterday 
ty anyways
Hey all, is there a mod or setting to have snow and snowfall weather in the zone? I’ve seen clips of them but don’t know where to start and implement the changes without breaking anything else
!inverno
@strong nimbus Remove the NEWCOMER role to access the links - https://discord.com/channels/912320241713958912/1029827096488452137
Choose only one:
- Project Inverno for GAMMA: #1187868665975156756 message (recommended for DX11 players);
Support thread: https://discord.com/channels/912320241713958912/1316762917110288414
- Yet Another Winter Mod (YAWM) for GAMMA: #╟🔰☢newbies-chat message (recommended for DX9/DX8 players).
SymInit: Symbol-SearchPath: '.;D:\stulkar\anomaly\bin;D:\stulkar\anomaly\bin;C:\WINDOWS;C:\WINDOWS\system32;', symOptions: 530, UserName: 'QUSY'
OS-Version: 6.2.9200 () 0x100-0x1
D:\stulkar\anomaly\bin\AnomalyDX11.exe:AnomalyDX11.exe (0000000140000000), size: 20606976 (result: 0), SymType: 'PDB', PDB: '.\AnomalyDX11.pdb'
stack trace:
xrCore\xrDebugNew.cpp (922): UnhandledFilter
xrGame\player_hud.cpp (392): hud_item_measures::load
xrGame\player_hud.cpp (231): attachable_hud_item::update
xrGame\player_hud.cpp (273): attachable_hud_item::setup_firedeps
xrGame\WeaponMagazined.cpp (1206): CWeaponMagazined::switch2_Showing
xrGame\WeaponMagazined.cpp (649): CWeaponMagazined::OnStateSwitch
xrGame\Weapon.cpp (1169): CWeapon::OnEvent
xrGame\Level.cpp (495): CLevel::ProcessGameEvents
xrGame\Level.cpp (623): CLevel::OnFrame
xrEngine\pure.h (106): CRegistrator<pureFrame>::Process
xrEngine\device.cpp (617): CRenderDevice::FrameMove
xrEngine\device.cpp (298): CRenderDevice::on_idle
xrEngine\device.cpp (548): <lambda_d062b7a0a71a21d2b6f54922ce72254d>::operator()
SymInit: Symbol-SearchPath: '.;D:\stulkar\anomaly\bin;D:\stulkar\anomaly\bin;C:\WINDOWS;C:\WINDOWS\system32;', symOptions: 530, UserName: 'QUSY'
OS-Version: 6.2.9200 () 0x100-0x1
D:\stulkar\anomaly\bin\AnomalyDX11.exe:AnomalyDX11.exe (0000000140000000), size: 20606976 (result: 0), SymType: 'PDB', PDB: '.\AnomalyDX11.pdb'
stack trace:
xrCore\xrDebugNew.cpp (922): UnhandledFilter
xrGame\player_hud.cpp (392): hud_item_measures::load
xrGame\player_hud.cpp (231): attachable_hud_item::update
xrGame\player_hud.cpp (273): attachable_hud_item::setup_firedeps
xrGame\WeaponMagazined.cpp (1206): CWeaponMagazined::switch2_Showing
xrGame\WeaponMagazined.cpp (649): CWeaponMagazined::OnStateSwitch
xrGame\Weapon.cpp (1169): CWeapon::OnEvent
xrGame\Level.cpp (495): CLevel::ProcessGameEvents
xrGame\Level.cpp (623): CLevel::OnFrame
xrEngine\pure.h (106): CRegistrator<pureFrame>::Process
xrEngine\device.cpp (617): CRenderDevice::FrameMove
xrEngine\device.cpp (298): CRenderDevice::on_idle
xrEngine\device.cpp (548): <lambda_d062b7a0a71a21d2b6f54922ce72254d>::operator()
take gauss in hand, cant load my save 3 times in roll, always crash. F
!crash / send full log pls
@delicate wind, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
wrong file look at screenshot
Btw he send .log
this?
yes
But he have aoe
Game started: 06.01.2026 16:22:56.117 
bro before aoe i have 4x more crashes))))
can you run on normal exes so the log updates, and then send it here bc its probably not an aoe problem
!aoe
@delicate wind
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
You latest log with aoe, we don't support aoe so remove it
yes its the correct file. but the date is wrong bc u arent on normal exes at the moment
Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
Function : CRender::texture_load
File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRenderDX10\dx10Texture.cpp
Line : 535
Description : Экземпляр устройства GPU приостановлен. Для определения соответствующего действия используйте GetDeviceRemovedReason.
Arguments : d:/stulkar/anomaly/bin/..\gamedata\textures\wpn\wpn_scope_pso_1m2-1_bump.dds
stack trace:
- Make sure you start your game on DX11 if you tried 10 (10 is broken)
- If that does not work restart pc
- Still getting the GPU device instance crash downgrade to DX9, type
!dxin #🤖bot-commands and follow instructions from guide
Btw he run on dx11avx
wpn_scope_pso_1m2-1_bump.dds also look from what mod this file
this i think
! scopes//try this
!scopes //sry
@delicate wind
- Download the mod file from the provided link. DO NOT EXTRACT IT
- Rename the file you just downloaded, to:
Sights-and-Optics-retexture-by-Meowie.zipEXACTLY - Place the archive you re-named into
\GAMMA\downloadsfolder. Overwrite if it asks. - Run the GAMMA launcher
- Uncheck/Disable:
- Check MD5
- Force git download
- Click:
Install/Update GAMMA
Expression : <no expression>
Function : CResourceManager::_GetBlender
File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRender\ResourceManager.cpp
Line : 68
Description : fatal error
Arguments : Shader 'models\scope_zwrite' not found in library.
stack trace:
original dx9 without avx
i do that bro cuz this mod ruined when i install gamma, and i installed him myself
!dx //need this for playing on dx9
@delicate wind
If you want to play with DX8 or DX9, follow this guide: #╭📖faq message
Expression : <no expression>
Function : CModelPool::Instance_Load
File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRender\ModelPool.cpp
Line : 121
Description : fatal error
Arguments : Can't find model file 'anomaly_weapons\wpn_ksg23\wpn_ksg23_optic.ogf'.
stack trace:
2nd time i try on clean dx9 profile(537 mods), after i add 438 and anyway i got this crash
you know nevermind i'm give up, thx guys for help, i don't want fuck with this xray shit
can someone help me with that, happend when i tryed to load a save
@lusty creek
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
!mags //reread
Doublecheck the instructions.
Oh sry already send

thanks ill try that
I'm having a pretty big fps hit with Inverno when a snow storm hits. Anyone know what settings I could change to make the fps loss hit a bit less? Inverno is the only extra mod I've installed. I haven't disabled anything either. (not sure if I needed to since it seems to be working fine as is)

a heavy snow storm is hit on performance for everyone unfortunately
oh word. thanks.
install this as regular mod below inverno
this will just force only light snowfalls
Im crashing to desktop when pulling out the Gauss Rifle to kill Eidolon. Im using Anomaly mag redux. Any ideas what it could be?
I'd post the logs but I dont remember how to pull them
When you take gauss or when you shoot
When I take it out
!3dss
@lavish hazel
Having troubles with 3DSS mod download or the mod itself is busted?
- Download the mod manually from this link
- Place it into
[Your Gamma]\downloadsfolder, replace if needed. - Open Gamma Launcher and press
Install/Update GAMMA
IF it's your first installation, leave all boxes CHECKED.
If your mod is busted, UNTICKCheck MD5andForce git download(OR follow instructions provided by a Helper)
- Wait for the install to end.
!backup
@lavish hazel
Follow this to "save" your settings and keybinds before updating: #╭📖faq message
And if you want to keep your personal mod list between updates, follow this: #╭📖faq message
Thank yall so much I was struggling LMAO
help
So I just reinstalled, Gamma and am playing on easy, I have come across two Seva suits already is this normal for the first like 8 hours of gameplay?
I also was wondering how to actually turn on the tactical compass instead of the minimap? I switched the mods in mo2 but the compass is not visible and the minimap is still there?
Is anyone else having issues with the head torch? I'll have it on working fine, and then when I go to pick up something or loot something the torch stays on but the actual light source freezes in place so when i move (either player or camera) the light stays where I looted. oddly enough it still follows my camera movement.
!headlampstuck
@wind sierra
Go to Mod Configuration Menu > FDDA Redone > Item Pickup > disable Attach item to hand
for the compass I just turned on the tacticle (circle) one and then turned off the normal one off, and it worked fine
Is there a way around a crash that i believe is caused by kvma?
!crash // upload the log
@plush raptor, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
sorry took a while had to run back into yantar where it always crashes when loading in
Did you follow the instructions on the kvma moddb page?
You need to disable a couple mods AND start a new game.
Yeah i done both of those 2 things to a T . disabled i believe 5 mods 28,29,30,31,251 and better merc voices then i made my character. its been fine for the past 100 hours
Double check you disabled all the mods you need to.
!modlist // lemme see
@plush raptor Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
Okay so I don´t get what exactly is up but "farts" is already in gamma, its just called "Tactical Fonts for Anomaly" and enabled by default.
Why is "G.A.M.M.A. Icons" so far down your list?
I dont have the slightest clue, where should it be ? And any idea how to go about dealing with the kvma issue? If i disable it and re-enable the things i disabled for it then it crashes on loading any save but with it enabled I cannot go to yantar because of one zombie model missing xd
Yeh you absolutely can´t change NPC models mid save.
you sure its zombie model not eco girl?
Whats eco girl?
sim_default_zombied_3_default_24 this when going to yantar
Hello, i have a problem and i can't find how to fix it
I tried to install "Modular Attachment System for G.A.M.M.A." (and the other mods that are needed, and i get an error everytime i start the game:
SymInit: Symbol-SearchPath: '.;D:\GAMMA3\anomaly\bin;D:\GAMMA3\anomaly\bin;C:\WINDOWS;C:\WINDOWS\system32;', symOptions: 530, UserName: 'bojan'
OS-Version: 6.2.9200 () 0x300-0x1
D:\GAMMA3\anomaly\bin\AnomalyDX11.exe:AnomalyDX11.exe (0000000140000000), size: 20606976 (result: 0), SymType: 'PDB', PDB: '.\AnomalyDX11.pdb'
stack trace:
xrCore\xrDebugNew.cpp (922): UnhandledFilter
!aoe
@small moat
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
Think my best bet is to make a new character with kvma remove? Anyway that I could catch up the 100 hours real quick to get back to a similar spot ?
Sorry I forgor to answer, you can just try to make a new save with KVMA on and the mods disabled, debug and run around a bit, go to yantar and see if that works. !debug in #🤖bot-commands
Right and G.A.M.M.A Icons should be at priority 414
Ill give this a try . So new character with the exact same mods that i currently have and see if yantar crashes?
Should i move it back up if i was to continue on the save or just leave it where it is and move it back up if i make a new character?
Basically.. that is at least what I would try.
Ill give it a try . or just make a new character since that mod seems to be a ticking timebomb .
@verbal bay thank you for looking into it with me btw
Yeh, no worries.. I´ll fuck off now.
Have a good one 
plis how I fix this
!modlist // cant help without this
@karmic jacinth Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
It looks like you turned on text made for a larger aspect ratio or a higher quality (2k or 4k) than you have
if you're on 1080p, you should have 1k enabled
if you're on 1440p, you should have 2k enabled
if you're on 2160p, you should have 4k enabled
If you're on 720p, well, you're a little cooked as there is no size meant for 720p
Akms sight unaligned
https://streamable.com/83b3br
Having an issue with the Rifle Dynamics RD-74N ISG Tactical. When ADSing, the sight picture seems to snap into place at the end of the animation. This is especially noticeable when moving side to side. Video linked above demonstrates the issue.
Would anyone happen to know why I don't have any legs with GFY? 🤣 Not a big deal but it's definitely bugging me.
!3dss
@marble comet
Having troubles with 3DSS mod download or the mod itself is busted?
- Download the mod manually from this link
- Place it into
[Your Gamma]\downloadsfolder, replace if needed. - Open Gamma Launcher and press
Install/Update GAMMA
IF it's your first installation, leave all boxes CHECKED.
If your mod is busted, UNTICKCheck MD5andForce git download(OR follow instructions provided by a Helper)
- Wait for the install to end.
Alright thank you
here's the answer to your issue #1306026800480256010 message
oh damn. i dont suppose there is a guide anywhere on creating transition points for the animations?
you'd have to learn how to animate in blender. someone made a blender plugin to import/export xray engine files https://github.com/PavelBlend/blender-xray
i know nothing about animating/using blender so I can't help you there
i was a hobbyist animator with blender a few years back, seems like as good a time as any to try again. thanks for the information friend
Any admins know why i keep crashing at Mil checkpoint in Cordon? I take out almost all soldiers and then crash. No error message. First time, i was looting one of them, second time, i was fighting and taking a med and crashed.
i actually just found a way to solve that issue
blend_move_anims on in console
I made a copy of "41- LowerSprintAnimaiton - Skieppy" script and deleted all excludes to fix the weapons not being lowered while sprinting
this does get rid of all unique animations for weapons, but I like having consistent animations and smooth aim anims
stack trace is empty. is this log from right after the crash
game generates new log every time you launch
its from right after the crash. i didnt start the game again or anything. just came to discord and posted that log pic
see if you can consistently crash in the same way
okay. its tough though bcuz i have to take out like 10 soldiers before it happens
game crashed on game creation screen after i added the stalker 2 icon modpack
extra mods
is my mod order incorrect or something?
First to try - set the highest priority to HD icons
Hi, I would like to disable only the stealth related mods in the default gamma settings. Are there any other mods that I should disable besides the "+45- Stealth Overhaul - xcvb" mod?
If I Enable / Disable a Mod inside the Mod Organzizer, does it automatlly show me, which kind of mods I need to activate/deactive too ?
For example: If I deactivate a mod, which would automatically cause two other activated mods to stop working, will the organizer notify me, or do I have to keep an eye on it myself and figure it out?
Because I'm currently looking through what I want to deactivate from the 554 and, if necessary, activate those in the list, as well as add new ones.
Do the demonized modded exes make the game brighter?
there's nothing that tells you what to deactivate if you turn off a mod
Okaythanks
chances are that gamma won't work if you randomly turn something off
no its something else
whats causing this man i dont get it
Is there a "guide", what kind of mods need be actiavted/deactivated, to use Hideout Furniture ? Just getting Error without any messages, when I try to run Gamma
Hideout furniture is in gamma by default hence the error
If ur on aoe it makes bloom weird, look in their server to turn it off. Or if ur switching back to official exes delete shaders_cache folder in Anomaly/appdata
Okay, cause I jst saw 245 Hideout Furniture 1.2.0 Aoldri deactived, so I though it isnt part of gamma
Go to trader or debug menu u can buy chairs and tables and stuff to put down
Great to know, thank u buddy
hey, doesnt Artigrok ballistics have a feature to add a new ammo? 8mm mauser hp rounds would be rad
Anyone know why I have a get all attachments tooltip all of a sudden?
Hello Professor Zhuk is invisible how can this be resolved?
thta is a super outdated version of the furnitures mod. the up-to-date version is ALREADY enabled by default.
!dx
@ember mesa
If you want to play with DX8 or DX9, follow this guide: #╭📖faq message
fairly sure this is a script mod you install. And debug is enabled
something not for support
hi, how fix ?
the laser on the AK-74 "PMC" isn't working probably
you can see the beginning of the laser, but it doesn't appear
Update 3dssg or turn up your view distance to max
Can anyone help? all i've added is RE:DONE
i think it was a unexpected exception error
did you download every mutant pack
yeah but i dont have them all ticked
should i tick all of them and just disable the ones i dont like via the MCM?
yeah im using the AIO mutant pack
it just crashes you cuz it couldnt find Rotan mutant
Oh ok, i'll reinstall the AIO pack and enable them then thank you :)
making a completely clean start and was goign to add phillys honey badger . it has patches for gamma one of which is for IlrathCXV's Arti's Special Ammo and Ammo Rebalance for GAMMA. Was wondering if anyone has used it in gamma and how did they find it and if they had any issues
no its not aoe
its a different modded exe tho, and i forgot to delete shader cache when switching back thats why i thought it wasnt the exes, but its fine i just lowered my brightness and stuff and it looks good now
I have an issue with the underbarrel grenade launchers (any of them) - i can't activate them, i changed the bind to other keys and stuff but still can't arm the darn thing, any ideas what might be causing the issue?
#🔨modded-gamma-support message
Read this but don't ask me
Can someone help me how to put this ghillie camuflage armor mod into gamma i got 0% experience in gamma modding (never modded the game in my life) so if someone can help me how to put it where to put it and how to do it correctly?
I got all 554 mods that work 👍
Can anyone guide me on how to make bandage heal the overall health as well as stop bleeding
Just to be sure, where's the user.ltx file?
Anomaly/appdata
what exatly is 3dssg?
3d scope?
Thank u!!!!! that solved it!!
there are many things with 3dss.... there is no 3dssg
3dss FOR GAMMA....
ok
(I only have the autowalk mod)
Does having a bunch of stuff in my huge stash crash the game? I’m about 5 days in and it’s crashing a bit and it delays when I put more stuff in my stash
In army warehouse
upgraded my gpu today, game still runs like shit, specially on combat. the funny part is that cpu util is on 15% and gpu on 50-70%, but the frames are still dropping, anybody knows what's happening? and yes, I have disabled cpu 0 on task manager. This is a print from the military base on agroprom
it doesn't work sadly
hello, do you put weapons with 3dss support before or after 3dss? in the load order, i mean
what should I do now?
After
It should have
Thank you!
perfect, ever since I update that 3dss for gamma, my game crashes
Soo Im using the winter camo for the xm177 and my acog doesn't work, anyone got any tips or recommendations to fix this?
is there something else I can do, to fix the laser issue´?
this mod specifically
https://www.moddb.com/mods/stalker-anomaly/addons/xm4-black-ops-cold-war-commando-winter-skin
!crash
@novel tulip, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
No. It's a mesh thing in 3dssg
Correciton it's the XM4
so, i hope it was the right one
so, it seems no laser is working
or maybe only ak plattform guns
What's your dynamic view distance set at?
hey im playing on re:done and after having turned off the miracle machine and trying to enter radar to turn off the brain scorcher, it insists i do not have the psy-helmet and starts draining my psy hp bar(i do have it), any ideas what could be the issue?
let me check
btw, the laser on my pistol works probably? Seems like it's affecting AK Plattform guns
but I might be wrong
here
That's why
ok
If it works it's because I haven't changed it yet
Dynamic view distance in settings, not fov
ah ok
sorry
can I find it under "Visual/Advanced?
because, I got my world view distance like this. If that's what you mean at least
if it's not that, can tell me where I can find it
so, the laser on my pistol works
!aklam
What
You already did this, its just bot command where you can find dynamic distance setting
Guys the monolith plans mission doesnt work, i cannot open the door in pripyat hotel no matter what can i do.
If gamma crashes as soon as the initial black screen appears, and creates an empty log in Anomaly/appdata/logs, but Anomaly itself launches fine, what could be the problem
try running it directly from MO2, dx11 or dx11avx, delete shader_cache in anomaly/appdata before every launch
if doesnt help then some of your mods
Also answer this if doesn't help
- Do you have fwp?
- Pc or laptop?
I'll test them out later and get back to you, had to go afk for a while
!shader
@midnight folio To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
thanks dude works now
does it work if you turn it off?
it's probably not compatible with 3dss because there is not an entry for it, look for a patch pehraps
maybe ask in mas thread ->
actually no wrong thread
didnt find a single person who had the same issue
guys my game crashes when I put a scope on the ruger sr556 launcher is 8.3. 556 mods because no stash weight limit and the suppresions dont cause jams mods are ticked. I see a x next to fdda redone fixes but it is not ticked. I'm using direxct 11 I tried to put the hv scope that 10x one and got this error put I get different errors with almost every optic
! 3dss //try reinstall 3dss
@quartz peak
Having troubles with 3DSS mod download or the mod itself is busted?
- Download the mod manually from this link
- Place it into
[Your Gamma]\downloadsfolder, replace if needed. - Open Gamma Launcher and press
Install/Update GAMMA
IF it's your first installation, leave all boxes CHECKED.
If your mod is busted, UNTICKCheck MD5andForce git download(OR follow instructions provided by a Helper)
- Wait for the install to end.
will try thank you
there is a another 3dss zip 3.20 in the downloads folder I should delete that right?
Yo what is this mod I can not find anything about it anywhere
Yes
I just did agroprom underground, whenever I try to talk to barman to hand in strelok docs he has no new dialogue options, Im only running Re:done north and south map collections and visual mods which shouldnt effect quests, any idea what could be going on?
it worked thank you guys
Trying to use Dark Signal Gunscape's newest update but it seems to be conflicting with the KSG23
[error]Line : 371
[error]Description : fatal error
[error]Arguments : [DLTX] Duplicate section 'wpn_ksg_sounds' wasn't marked as an override.
Override section by prefixing it with '!' (![wpn_ksg_sounds]) or give it a unique name.
Check this file and its DLTX mods:
"e:/s.t.a.l.k.e.r. gamma/anomaly/bin/..\gamedata\configs\system.ltx",
file with section "mod_system_z_weapon_sounds_wstfg_shotgun.ltx",
file with duplicate "mod_system_zz_snd_ksg.ltx"```
Ya'll got any ideas how to fix this without just disabling the gun?
Override section by prefixing it with '!' (![wpn_ksg_sounds]) or give it a unique name.
...
I may be stupid
Was trying to change the KS23 when it's a gunscape mod issue
anybody know what mod is causing this crash? 🙁
fwp?
Sorry if there's been a billion questions like this. Just added KVMA HD models. Deactivated the base gamma mods (#29,30,31,32,251). Loaded in and some inventory icons appear to be older/poorer resolution than base gamma. Is there another mod that is compatible with KVMA which restores the base Gamma HD icons? Thanks
Yeah thats what im thinking too
anyone have a working mod for an mk18 mjolnir?
My mod manager is fine until I launch anomaly and press play on anomaly it crashes anomaly goes back to mod manager again without an error and a windows administrator permission jingle I tested with and without the new mod I downloaded (grass and trees by panceride) and it does not seem to affect it but I have turned on some ui 3d scope and gun pack mods from the mod manager (the already available ones)
Also this appears to pop up
Any way to unlock doors? Got a gold stash in pripyat behind a locked cupboard
thats nexus mod links. gamma doesnt use nexus so you can just hit no
also this is just mo2 log. it won't show why anomaly is crashing
I will come back with the anomaly log but thankfully it is not gamma or mm crashing
!mo2search use 2nd search bar to find items_placeables.ltx and see what mod its from
@sacred widgetUse the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.
⠀
Thanks man
gamma's is empty so it must be something you added
The only thing I added is grass and trees by panceride
The rest is just activated by mm and was already there
I just enabled them
!modlist
@sacred widget Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
don't enable any mods that come with gamma that are in G.A.M.M.A. End of List
Gotcha thanks for the reply, I'll have to do some investigation with how I prefer those S2 style icons over default gamma. Otherwise other than KVMA any other model improvement mods that are compatible with base GAMMA?
Ohhh
those are all old mods
It was the end of list
That was the problem, thank you!
You're a legend. Thanks!
Hey all, any idea how to fix this one? It's caused by the Kmack's all ghillied up mod being enabled and drawing the R700. Load order for my Kmack stuff attached if it helps
whats your 3dss version
3.20.7, if I'm reading it right
Ahhh I've just seen on moddb that there's a new version, I'll install that and give it a go
need to go to their thread
Gamma crashes when trying to craft T1 artefacts using perk arts
I have Grok's despawner turned off, duty expansion on and interractive PDA mod
!sss
@civic prawn To reinstall SSS using the GAMMA launcher:
- Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip
(x.x. means version number, and yes delete them all if you have multiple of those zip files) - Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
- Place the downloaded file into your
GAMMA\downloadsfolder. - Open the GAMMA Launcher, and uncheck/disable these options:
- Check MD5
- Force git download
- Click "Install / Update G.A.M.M.A."
any suggestions
!mo2search // using the search bar highlighted in blue, search w_colt1911.ltx. right click the file that pops up and click "show in explorer". then right click the file in the explorer and open "properties". next, click hide. and then apply or ok
@mystic steepleUse the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.
⠀
i appreciate your help !
I'm having a shader compilation failed error when trying to use any meds. It's an 80+ hour save and wasn't a problem ay any point, then it happened twice during gameplay seemingly randomly. First time it happened, I deleted the shader cache, which broke the game completely. I put it back, which let me launch the game, but now this issue with every med i try to take.
Only added mods are companion related (armor, carry weight, wear armors they are given, inventory unlock, quick teleport) and my own carry weight.
Any ideas or is this a reinstall type situation?
*after the second time it happened I deleted the cache
!crash // send this afrer crash maybe someone can help, i gotta go tho 
@median oasis, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
Ok! haven't opened the game since crash, sending next
if needed I'll replicate the bug and send again
!sss looks like u should reinstall sss
@median oasis To reinstall SSS using the GAMMA launcher:
- Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip
(x.x. means version number, and yes delete them all if you have multiple of those zip files) - Download the mod file from moddb. DO NOT EXTRACT. https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
- Place the downloaded file into your
GAMMA\downloadsfolder. - Open the GAMMA Launcher, and uncheck/disable these options:
- Check MD5
- Force git download
- Click "Install / Update G.A.M.M.A."
Ok! I need to do an update overall I was putting off since it was working fine til now, so the Zone gods have finally forced my hand
Will reinstall and update, thanks for the assistance
(was on 0.94, just need to update some of the mods within it)
just downloaded KUDA's mk47 and RWAP, MASG compats, MASG and 3dss patches. got this error when making new game. deleted shader cache as well
i also followed venoxium's guide on youtube and replaced my ssfx_lut.script file in appdata with the one he provided on in the video
understood
!mo2search you can see what mod loadouts_injector.script comes from by searching in the 2nd search bar
@marble cometUse the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.
⠀
okay
now this has been happening
How does one remove the annoying blue glare from red dots?
@dense stone
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
any idea how to remove this flickering?
i enabled ammo check but it's not appearing in mcm and not working, also i enabled black market but traders arent selling mags
!mags
@elder valley
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
hmm I guess its this #╟🔰☢newbies-chat message
?
the solution to your issue 
point me to it
it was a fresh save no emission happend
thank you tho
If I join their discord will they help me??
Lovely
yes melancholy
I looked it up in the discord and apparently it's just a common issue with weather mods with no real solution other than the solutions in the post I forwarded
also did you delete shaders_cache?
yes i did
thank you ill just work around it
i have a question and i dont know where should i make it: is it possible to make the walls of hideout furniture feasible so that it counts as a shelter?
!sleep // no you have to do this i think
@charred gust
DON'T TOUCH Sleep deprivation IN SETTINGS.
- If you want to sleep WHENEVER you want
Follow this instruction : #╭📖faq message
- If you want to sleep WHEREVER you want
Install this mod (type
!ctrlmin #🤖bot-commands to learn how to install mods).
Second method unlocks sleeping whenever you want as well without additional actions.
fixed
@quiet tangle @hot prairie I'm very grateful, but it wasn't quite what I intended. I wanted to build a base with the walls from the hideout furniture and survive the emissions. I didn't want to rely on existing buildings already in-game.
Not possible afaik
I cant enter sidrovich's shop
!aoe // 
@midnight folio
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
BREH
Anyone know why this is happening? The only that I think would do this is ZTR, Glossy puddles, Colorful autumn
I crash with this error on startup when I try to use dark signal amplified gunscape mod
I dont understand how or where I need to do the overriding it mentions in the log
!mo2search use 2nd search bar and search for mod_system_zz_snd_ksg.ltx"
then right click -> Reveal in Explorer -> open the file
ctrl+f -> [wpn_ksg_sounds] -> change it to ![wpn_ksg_sounds]
@last frigateUse the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods.
⠀
Thanks a ton
Hey guys, I'm having a problem with doors on the Cordon map. I have a lot of addons on top of gamma most of them are re:done mods and texture packs. I've been playing with this modpack for a few weeks with no bugs, I decided to make a story playthrough with loners but none of the doors in Cordon work. Interaction message just doesn't pop up and I have to jump into them to open them with physics. The doors on other maps works for some reason.
The addons I have on top of gamma
!redone
@sick nebula
If you are using RE:DONE mods, please read the [comprehensive guide](#🔨modded-gamma-support message). We strongly recommend thoroughly reviewing this guide, as our support channels are primarily dedicated to G.A.M.M.A. issues. While we can offer some general assistance, specific support for RE:DONE-related issues will be limited, and you will often be directed back to the guide or its authors for detailed support.
Also, doors thing bc ur using aoe i think. So also no support bc of that
allright thanks I'll try without it.
keep getting this
Can anyone guide me on how to make bandage heal the overall health as well as stop bleeding
@tiny zinc Уточни, пожалуйста, я тут звуки некоторые заменяю. И вот нашел у тебя звуки Barret m98 bravo, но он почему-то только в Mono, в Stereo баррета нет. Если я возьму звук со Стерео и заменю Моно, будут ли в дальнейшем проблемы?
Так же увидел звуки выстрела Alligator. Откуда этот звук, в самой игре такого оружия не видел, как и самого звука не слышал.
использовать стерео звуки вместо моно нельзя
из дарк сигнал, аллигатор это аддон от lewd
cant imagine what caused this, I didn't add much, happens everytime I open my pda after reloading, removing icon mods doesn't matter,
Хорошо, а как мне заменить звуки баррета? Есть его стерео версия?
баррет использует звуки awm
если надо то добавь отдельные
В плане? Если я здесь заменю звуки, то у баррета тоже заменится, верно?
ага
Спасибо большое!
does anyone know which mod adds these icons to the pda?
can anyone tell me why i keep getting this error
I'm having a silent crash while launching game. Black screen comes and then crashes to desktop. I checked log file in "anomaly > appdata > logs" but it's completely empty. I installed atmospherics beta version. It was fine. But now it doesn't launch. even if I change it to gamma version of the atmospherics. Anyone have any idea?
Edit: Okay it seems like it was because of Nvidia settings. I just reset my nvidia control panel and it worked. Not sure which setting was causing this.
So, i have a problem. It appears that the NPCs doesn't shoot the mutants. They get aggro, and aim at the mutants, just not shooting. It's like an infinite standoff while they slowly die from the mutants. I had almost the entire merc base be killed by a group of zombies this way. I also have mags too.
(i also have disabled 5- Anomaly Radio Extended, 248- Night Mutants, Gamma Dynamic Despawner, Gamma Mirace Machine Remake, Gamma ZCP balanced spawn 1.4, xcvb’s Guard Spawner, Reload unjam same key.)
Provided picture is the example of the military and bandits aiming at dogs, but not shooting. (the dead dog on the left died from an electro anomaly)
is this how you activate the mag redux
turn off unjam and check mark redux?
yes
I cant cancel aiming while using gauss rifle, any solution?
I'm using 3dss pip and modular attachment sys.
hey, I can't loot mutants anymore. Is there some settings that i activated by accident, that could cause that?
anyone know what could cause these stretching things and missing textures, ive disabled all texture mods and its the same
i got some flicker probs with the trees and leves any ideas ?
i don't know why i keep crashing any ideas?
whats is causing this?
Hi, has anyone encountered this? NPCs don't shoot at anyone, and they behave the same way with other hostile stalkers. The mutants are fine, they attack, but the stalkers don't kill the mutants either. What could be the problem?
@azure bramble To fix missing scope reticles with 3DSS enabled:
- Go to Settings -> Modded Exes > Visual > Shader Scopes, make sure 3DSS is on
- Go to Settings -> Visual -> Advanced, make sure AA and SMAA are off
- Restart the game
Anyone know how to get the anomaly magazines redux working thats in the realistic magazine section?
I figured it out, after activating it and deactivating unjam same key. Move the redux mod up to above 206
so im guessing grok still didnt approve that mod cause the creator said grok did so the mod definetly some bs
can someone tell me, how I can fix it?
!busyhands // Sounds like busyhands to me.
@novel tulip "Busyhands" is the name of a bug that softlocks your game by preventing you from performing basic game functions, common signs include:
- Broken health HUD (all red)
- Can't do any animated actions (use meds, eat food)
- Crashing on area transition
- Can't open inventory
Highly recommend turn on412- Busyhands Detection and Blame - RavenAscendantmod to detect if it is really busy hands, and if so then which script caused it. Also keep it on to prevent further long term busy hands that make you lost a lot of progress. Noted that it can't 100% detect all busy hands, so common sense is still the best way
If you have it, reload an older save. Eventually this may not work anymore, you'll be in permanent busy hands, then it's time to start a new game. Read more here: #╭📖faq message
It is sometimes possible to fix with a full reinstall, make sure to use !delete in https://discord.com/channels/912320241713958912/1012510897136222293
If that isn´t it, check which mods you installed before that happened
!bc
@azure bramble
Use bot commands for yourself only in #🤖bot-commands. Do not clutter main channels.
so, I can still loot, stashes, corpses (human) and I can open my inventory. The only thing that doesn't work is the corpse of a mutant
Can anyone guide me on how to make bandage heal the overall health as well as stop bleeding
wrong channel my bad
if anyone has this similar issue it was because of the camo net fix mod in my case
@desert quest did you fix your trees issue? Did you set the SSS MCM setting to default?
Was searching through here as Im having the same issue as MosieK04 but I do nmot have the duty expansion
I did get a secondary error message after the second one also
I try it later after work
Dont ping me out of nowhere please.
!aoe
@gaunt sail
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
Apologies
Hey I figured it out. If you go to your KVMA mod file and find the stalker_merc folder (something like this: E:\GAMMA\mods\KVMA HD MR2.2\gamedata\meshes\actors\stalker_merc) you can copy and paste one of the .ogf files from here and rename it to the one it is not finding. It will just pull the loadout from whatever .ogf you copied when spawning but will allow you to load into Zaton no problem
Is the enemy movement behavior in this clip normal? They seem indecisive with aiming.
Game is crashing and trying to find the crash post in my appdata right now, I know it's in xray_name but I'm trying to find the specific code that tells you what caused the crash
edit: Found it
[error]Expression : no_assert
[error]Function : CALifeStoryRegistry::add
[error]File : D:\a\xray-monolith\xray-monolith\src\xrGame\alife_story_registry.cpp
[error]Line : 31
[error]Description : Specified story object is already in the Story registry!```
Hello.
I’m getting a consistent crash when equipping the Gauss rifle.
Important details:
I did not modify any weapon configs or files.
The weapon was received through a quest.
The crash happens immediately when I take the weapon in hands / move the mouse (HUD is created).
Crash log excerpt:
Can't find motion file
'dynamics\weapons\wpn_ak12_m1\wpn_ak12_m1_hud_animation_3dss.omf'
section 'wpn_gauss_hud'
model 'dynamics\weapons\wpn_gauss\wpn_gauss_hud'
It looks like the Gauss HUD configuration is referencing AK-12 M1 HUD animations, but the required .omf file is missing or incorrect.
Because of this, the game crashes every time the Gauss rifle is equipped.
Could you please confirm if this is a known issue and if there is an official fix or workaround?
Thank you.
what to do
!3dss // Type !backup in #🤖bot-commands to save your settings/modlist.
@austere portal
Having troubles with 3DSS mod download or the mod itself is busted?
- Download the mod manually from this link
- Place it into
[Your Gamma]\downloadsfolder, replace if needed. - Open Gamma Launcher and press
Install/Update GAMMA
IF it's your first installation, leave all boxes CHECKED.
If your mod is busted, UNTICKCheck MD5andForce git download(OR follow instructions provided by a Helper)
- Wait for the install to end.
!094 // Next time just upload the whole log
@turbid vector
If you're experiencing crashes after updating G.A.M.M.A. from version 0.9.3.1 to 0.9.4, open MO2, locate and enable this mod:
Pre-0.9.4 Saves Fix, inside the Alternative Addons & Patches category.
If you don't have REDONE mods, this "fix" is only a temporary solution. Starting a new game is highly recommended.
If you have, keep this enabled, it is required for REDONE in GAMMA
Tried to install kvma or HD models?
IF yes, doublecheck the instructions, turn off prefetcher if you use it.
Hello.
The crash log points to a missing file:
wpn_ak12_m1_hud_animation_3dss.omf
(path: dynamics/weapons/wpn_ak12_m1/)
Could you please clarify:
Which mod/package contains this specific file?
Is it part of the 3DSS mod, and if so, which version?
Or where can it be downloaded separately?
At the moment this file is not present in my installation, which causes a crash when equipping the Gauss rifle.
Thank you.
The bot command gives you the link and how to update it.
#🔨modded-gamma-support message
Untick Check MD5 and Force git download
Thank you for the reply.
Sorry, I missed the link at first — my mistake.
I really appreciate your help and the clarification.
Thanks again.
Thank you this worked, although I don't know why as I've been playing .9.4 for a while now and this error only occoured now after how long .9.4 has been out. What are these "REDONE" mods I should be looking into?
so i keep getting crashes whenever i go to rostok any ideas what's going on?
If you do not use those mods no need to look into them.
Before anything else : is your install on an external drive?
nope
why would you ask that?
E:\ANOMALY is the common tell and gamma/mo2 really doesn´t like external drives.
First thing I would´ve told is to move your install to an internal one !move
it's on an internal drive already
!crashtravel // Anyway you can just try this.
@clear oxide If you're crashing on "transition" or "fast travel" to a certain location or from a certain location: #╭📖faq message
If the instructions above didn't help you, write
!deletesquadsin #🤖bot-commands
Might be just a bugged squad
no you see the strange thing is it crashes after saving
so i load latest save and suddenly its ok for a time
!busyhands // Oh well if loading a save helps.. yeah seems like busyhands
@clear oxide "Busyhands" is the name of a bug that softlocks your game by preventing you from performing basic game functions, common signs include:
- Broken health HUD (all red)
- Can't do any animated actions (use meds, eat food)
- Crashing on area transition
- Can't open inventory
Highly recommend turn on412- Busyhands Detection and Blame - RavenAscendantmod to detect if it is really busy hands, and if so then which script caused it. Also keep it on to prevent further long term busy hands that make you lost a lot of progress. Noted that it can't 100% detect all busy hands, so common sense is still the best way
If you have it, reload an older save. Eventually this may not work anymore, you'll be in permanent busy hands, then it's time to start a new game. Read more here: #╭📖faq message
It is sometimes possible to fix with a full reinstall, make sure to use !delete in https://discord.com/channels/912320241713958912/1012510897136222293
i thought so too but the mod in recomendations doesn't seem to detect anything

i mean i know
i just very much hope its not busy hands doing invictus RN
also for some reason i don't get an error message when it crashes
I know, your crashlog has no stacktace either.
yeah strange
!modlist // I´ll take a quick look but the odds are not good tbh.
@clear oxide Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
thx
damn
this started to happen suddenly when trying to trade with a trader, (and i have mags redux enabled and mags buyable) tried disabling buyable mags didn't fix it
I don´t know what GAMMA-Artefact-Container-Rework-main is but if that adds new items you can´t deactivate it anyway
!mags // Doublecheck the instructions
@hard atlas
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
It re-adds artifact containers
i could get rid of it tbh since i would just need to make the ones that already exist dissapear
Gotcha, yeah then like I said .. probably busyhands from what you described
i wish there was a way to confirm it for sure
since that crashing seems to be the only thing
We can´t, I can´t see an obvious issue with your modlist and your crashlog has no stacktrace
Could it be that I am just an idiot and overlooked an obvious issue ? Yeah but I sure hope I didn´t.
I suppose I'll try and rush the story
I guess you can try !axr in #🤖bot-commands , to reset your MCM settings?
Make a backup of the file though so you can revert if that isn´t it.
pretty sure I've not changed a thing in MCM
Alright then I am all out of ideas
i still have the same error after following what u sent
Just a heads-up: the crash was not caused by a corrupted file.
The OMF itself is valid, but it was located in the wrong folder.
X-Ray was looking for:
dynamics/weapons/wpn_ak12_m1/wpn_ak12_m1_hud_animation_3dss.omf
However, the file was actually located in the AK-74 folder
(e.g. dynamics/weapons/wpn_ak74_pmc/).
After copying the same OMF into the expected wpn_ak12_m1 path, the crash was completely gone, without updating GAMMA.
So this seems to be a misplaced / missing file path issue rather than a broken animation file.
It was fixed in later 3dss versions. You have an older version
Yeah gave them the command to update 3dss already 
guys, where to fing logs after game crashes please.
ok i think it wasn't busy hands
i think the game just REALLY disliked loading and unloading thousands of items (i'm moving my base from rostok to jupiter)
i tried to install a stupid subtitles mod someone suggested last night in the #╟🔰☢newbies-chat and now ever since my game instantly crashes on startup saying saying the shader compailation failed, when it was working fine previously. even disabling/uninstalling the mod in question doesnt help.
ive checked the logs in the anomaly appdata folder but cant really parse what the hell is actually wrong. the only extra mods beyond the defaults are these ones here.
the Atmospherics version there was one of the new beta ones i believe that i got from the discord. if i disable that and revert to the original one in Gamma Fixes, the game does launch, but i have a number of shader bugs-most notably the 3d scopes having no reticles and having bugged visuals when aiming in certain areas
!shaders need to delete shaders_cache every time you install new shaders
@vast mulch To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
all of the problems, including these reticle problems, persist after multiple manual deletions of the shader cache in the appdata folder
well do you have 554 mods without any of your added mods enabled? it seems like your base gamma could be broken
like reinstall 3dss to fix scopes
559 total including the 5 extras, 554 without
well do you have the same scope issues without your mods enabled
without them enabled, the game crashes due to some texture issue with removing KVMA
well yea u can't try the same save again. just test in debug
any hd model replacer cannot be removed mid save
or i guess it can just make me look like a fuckin buffoon and fix itself with another shader cache deletion, despite the last 5 doing nothing

try asking in the atmos discord for beta support?
is m249 available in game normally?
yes
ok m249 with monstrum is misaligned. I just checked it #🔨base-gamma-support message
such a bad image 
Crashing every single time i try to go into Truck cemetery
i installed ccon rotton life terrain texture redone arrival anomaly
i haven't been able to figure out whats causing the crash, currently running redone, Arrival and C-con grass
2d scope on my mosin. How do I make it 3d??
can anyone help me with something. I want to make my own reshade on gamma but anytime i uncheck "delete reshade DLLs" box and try to update it will not allow me to launch game after the update and gives me abunch of errors after the update
Oh ok then
!reshade
@naive rose
Download the software from https://reshade.me/ and install in the Anomaly/Bin folder
There will be no official support provided for ReShade, for any issues you can try seeking help in: #╟🎑reshades message
If you can't access that channel, go through https://discord.com/channels/912320241713958912/1029827096488452137 first
!redone did u follow the guide
@whole mist
If you are using RE:DONE mods, please read the [comprehensive guide](#🔨modded-gamma-support message). We strongly recommend thoroughly reviewing this guide, as our support channels are primarily dedicated to G.A.M.M.A. issues. While we can offer some general assistance, specific support for RE:DONE-related issues will be limited, and you will often be directed back to the guide or its authors for detailed support.
I used the guide, but i don't think thats whats happening, did some reloading old saves.
i can go in BEFORE i started the sin questline
but after starting it, then the crashes start
Another issue
!modlist idk your log didn't have anything
@whole mist Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
Can someone help
are you on the latest 3dss?
Uhhh
and did you add any gun mods that overwrite 3dss
posting in here again: my game crashes on start up when using DX11. My current version is 8.3 and I am using 556 mods. The extra mods I am using are the magazine mods. It's been working fine for the past 30 or so hours I have been playing, only today that it stopped working.
No I don’t
Updating gamma to see if that fixes it I didnt even norice it had an update
!backup don't forget to save your settings
@little zephyr
Follow this to "save" your settings and keybinds before updating: #╭📖faq message
And if you want to keep your personal mod list between updates, follow this: #╭📖faq message
Meh I didnt change anything itll be fine

All I have to do is rebind sprint and crouch
Are you using Mas?
MAS?
I only added a few mods. and theyre all for magazines, blood puddles and UI
I think its just out of date cause it wasnt doing this before. Ill update once its updated
can you get it to crash again and upload log right after crash?
you want the log and the popups?
i couldnt figure it out based on modlist
yes
has anyone had problems with : TBs_RF_Receiver_Hidden_Package_Sidequests_v1.8
it just caused a crash with me
are you saying you added that mod?
I didn't, i think it comes default in gamma
yea it is
Wasnt sure if it was a known issue for that mod, I am running mods on top of default but nothing that I could see messing with it
would need the log to see what error
Here you go
sorry forgot about you lol. can you launch dx11 directly from the exe in your anomaly/bin folder?
!modlist send pls
@opaque jewel Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
my ammo counter is gone how do i get it back?
idk how to solve this. from what i read its a mods issue
hmm.
like load order prob
I did mess around with my load order earlier, so its probably not optimised. Ive never seen a crash mentioning the rf receiver though
did you turn on Mags redux?
No, I did download ALOT of gun mods
don't enable "0742","+","G.A.M.M.A. NPCs cannot see through foliage"
enable this instead "0570","-","G.A.M.M.A. NPCs cannot see through foliage - Tosox Version"
you can get rid of these since they are in gamma already
"0773","+","Serious_Tasks_QoL_Pack"
"0774","+","Serious_Workshop_Optimization"
not sure what the issue is exactly since it was an engine error
ah this could be it 
C:\GAMMA\S.T.A.L.K.E.R. GAMMA\Anomaly\bin\eurotrucks2.exe
not the eurotrucks, I know its for dx12
sweet thank you ill that and see how it goes
I suggest you change your gamma/anomaly installs to root drive, like #🖥️how-to-install message says #🔨base-gamma-support message
lool yeah i was trying out the nvidea game filter the other day forgot to switch the launcher back to dx11
wait, is my install not a root drive?
well your anomaly is inside your gamma folder...
yeah, I installed gamma from GOG, im pretty sure its how it does it by default, unless im wrong?
was gonna say I did have that issue before, gog tries to install in program files (x86) which caused issues when I first tried updating
yea program files is bad
yeah makes sense, legit I got worried a sec there lmao
never again
but ty ill give those fixes a shot
i installed ccon rotton life terrain texture redone arrival anomaly
game is too bright
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...omaly\gamedata\scripts\grok_actor_damage_balancer.script(824) : gbo_adb
LUA error: ...omaly\gamedata\scripts\grok_actor_damage_balancer.script:824: attempt to index global 'gameplay' (a nil value)
Got this crash when loading into Rostok game started chuggin at like 20 FPS and then CTD not sure whats up. I have some extra mods installed such as New Levels and RE: Done and RE:Vison and REDMoon
is it safe to disable inverno mid run?
yea. delete shaders_cache after
great ty
!1364
@pallid shale
If you get the error 1364 "The application made a call that is invalid...", try the following in order until the error is resolved:
- Try restarting your PC.
- If restarting your PC does not help, try disabling the applications with overlay (Discord, MSI Afterburner, etc.) as well as applications like Wallpaper Engine etc.
- Install DirectX libraries (type
!depsin #🤖bot-commands ) - If disabling software does not help, temporarily switch to DirectX 9 (use
!dxin #🤖bot-commands for instructions on how to switch).
After a certain amount of time, you can try to revert the changes and switch to DirectX 11. The bug may be fixed.
do you use bhsro?
Who sees this when equipping a detector? Game runs fine otherwise.
!manual // https://www.moddb.com/mods/stalker-anomaly/addons/fdda-redone - also do !backup in #🤖bot-commands to save ur settings and modlist if u want
@grave vector To manually reinstall problematic mods do this:
- Go to the link(s) the Helper has provided.
- Download the mod file(s). DO NOT EXTRACT.
- Place every archive you downloaded into your
GAMMA\downloadsfolder. Overwrite if needed. - Run the GAMMA Launcher as admin.
- Uncheck/Disable:
- Check MD5
- Force git download
- Click
Install / Update G.A.M.M.A.
hi there, I got the k98 error, already tried the fix, but im getting the same error still
!bas redownload and extract gamma rc3
@round ether
- Re-download GAMMA RC3.7z from one of these links:
https://www.mediafire.com/file_premium/xgldcs2qbzpcz20/GAMMA_RC3.7z/file
https://gofile.io/d/Y8NnGS
- Extract it into your GAMMA folder, overwrite all files when asked
- Run the GAMMA Launcher as admin
- Click "Install/Update"
danke hatt geklapt
thank you!
soooo the optics on teh M4A1 "Butcher" variant are messed up, no mods that change either of them
its a debug gun by default so no 3dss support
is there a channel explainging where to add new mods. like the order they go in. sorry i cant find them and how that works
black market moment
i think this mod here readds it if still wanted to use -> #1335760279056809995 message
also reanimates it
thanks
!hdmodels
@ivory dust
Remove the NEWCOMER role to access the link - https://discord.com/channels/912320241713958912/1029827096488452137
You have two options, do NOT install both, choose only one:
!crashlog
@trim wigeon, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
! [SCRIPT ERROR]: ...bin/..\gamedata\scripts\tasks_placeable_waypoints.script:2732: attempt to call field 'on_option_change' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...bin/..\gamedata\scripts\tasks_placeable_waypoints.script(2732) : on_option_change
LUA error: ...bin/..\gamedata\scripts\tasks_placeable_waypoints.script:2732: attempt to call field 'on_option_change' (a nil value)
this is the log
!modlist
@trim wigeon Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
disable everything you enabled in G.A.M.M.A. Disabled (DO NOT ACTIVATE) & G.A.M.M.A. End of List
the mods that are in there from gamma are disabled b/c they are old
Can anyone tell me where to change the text of specific weapons? I want to change the AK12 to AK15 and Soviet Union to Izhmash but cant find the file anywhere
st_items_weapons_bas_eng.xml for ak-12
My man, thanks!
!manual reinstall this I guess https://www.moddb.com/addons/personal-adjustable-waypoint-for-anomaly-151-152-and-gamma
@trim wigeon To manually reinstall problematic mods do this:
- Go to the link(s) the Helper has provided.
- Download the mod file(s). DO NOT EXTRACT.
- Place every archive you downloaded into your
GAMMA\downloadsfolder. Overwrite if needed. - Run the GAMMA Launcher as admin.
- Uncheck/Disable:
- Check MD5
- Force git download
- Click
Install / Update G.A.M.M.A.
Lmao I did that and now I'm getting this on game save load when everything was fine beforeExpression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
Line : 262
Description : fatal error
Arguments :
2 : [Lua] c:/anomaly\gamedata\scripts\a_tab_utils.script(23) : has_value
LUA error: c:/anomaly\gamedata\scripts\a_tab_utils.script:23: bad argument #1 to 'ipairs' (table expected, got nil)
Check log for details
stack trace:
your issue was this
#🔨base-gamma-support message
532 mods
just run launcher again with all 4 checked tbh...
So how was it working fine with 532 but now that I was at 554 (plus the save and stutter fix) it wont load a save?
unless u want to manually install a bunch of mods
did u update gamma from before 0.9.3? and are trying to load a save from before then
I've been using the same save for a year now and keeping it updated with no issues, now it won't even load
ok enable Pre-0.9.3.1 Saves Fix in Alternative Addons & Patches
On top of pre 0.9.4?
thats fine yea
you may need Pre-0.9 Saves Fix as well at some point
Yeah I threw that on as well just for grins and giggles
i assumed pre 0.9.4 covered the other versions but oh well i won't complain
they each have different files in them 
After reinstalling Maid's icons? Maybe something else? Any help would be greatly appreciated.
@lime vigil
!disabled
@trim wigeon read this: #╭📖faq message
!maids
@slender osprey Follow this: #╭📖faq message
like this?
you seem to keep enabling all the disabled stuff
This is busyhands. congratulations
!busyhands
@frigid turtle "Busyhands" is the name of a bug that softlocks your game by preventing you from performing basic game functions, common signs include:
- Broken health HUD (all red)
- Can't do any animated actions (use meds, eat food)
- Crashing on area transition
- Can't open inventory
Highly recommend turn on412- Busyhands Detection and Blame - RavenAscendantmod to detect if it is really busy hands, and if so then which script caused it. Also keep it on to prevent further long term busy hands that make you lost a lot of progress. Noted that it can't 100% detect all busy hands, so common sense is still the best way
If you have it, reload an older save. Eventually this may not work anymore, you'll be in permanent busy hands, then it's time to start a new game. Read more here: #╭📖faq message
It is sometimes possible to fix with a full reinstall, make sure to use !delete in https://discord.com/channels/912320241713958912/1012510897136222293
Thank you, but I think I figured it out. Pretty sure it was somthing that dynahud did.
"0539","+","Momopate's Loot Stabilizer"

"0659","+","179- Better Stats Bar - Demonized"
"0710","+","245- Hideout Furniture 1.2.0 - Aoldri"
"0721","+","365- Boomsticks and Sharpsticks 2022 Guns - Mitch & Team"
yeah okay
roll it all back
4 mods out
not 4 mods out
!default
@trim wigeon
To bring your mod list, settings and keybinds back to default, inverting any changes made by you:
- Open the G.A.M.M.A. Launcher with admin rights
- Uncheck every box EXCEPT
Delete Reshade DLLs - Click on
Install / Update G.A.M.M.A
Note: If you wish to keep your keybinds and graphical settings, go to Anomaly\appdata and backup user.ltx.
they are all out
and do not enable disabled mods
!hdmodels
!bc
What does mouse input buffer size even do? I'm getting a lot of stuttering in Zaton, which I can trace entirely to the lua garbage collection step. If i set gcstep to 0 I get buttery smooth frames but will randomly get a BIG lag spike that lasts for about 0.5 seconds.
Hi I'm kind of new to G.A.M.M.A and have played it for a few weeks a lot and no problems other than a small crash here and there. I tried to launch the game a few days ago and it wouldn't launch I then fiddled around with things using the discord and finally decided to reinstall from scratch now when I go to launch Anomaly it will launch fine without any added mods but when I try and add any mods even just one extra it will launch to the stalker anomaly start up menu but once I click play stalker anomaly it will start to load through the splash screen but close itself out and give no error message.
any help would be appreciated the mods im trying to run are the mods listed on clickrads mod list they have worked in the past fine idk whats going on.
base gamma woks fine but anything added on makes it do this btw
For the magazines mod i have to pick one of the two options being (Mag Redux or ATHI Mags Redux?)
!mags
@rough aurora
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
Do rain puddles not form naturally any longer when it rains? I'm not getting any puddles forming while it's raining in my game.
These are the extra mods I'm using that mostly affect the environment:
Where would I look for how to make warfare mode work? Or is that conceeded to not work for some reason?
!nopuddles
@red solar
If you want to add permanent puddles:
- Find the mod
290- Atmospherics Shaders Weathers and Reshade Latest - Hippobotin MO2 - Right click -> Reinstall, and choose ONLY these options:
00 - [REQUIRED] Sky Textures
01 - [REQUIRED] Atmospherics
06 - OPTIONAL PUDDLES ALWAYS PRESENT
09 - OPTIONAL Extra Weather Cycle
10 - OPTIONAL FOG Distance Increase
12 - OPTIONAL Improved Skybox fog blending
- Click "OK", then "Replace"
!warfare
@unkempt shell
G.A.M.M.A. isn't built with Warfare in mind, and Warfare is known for bad performance, bugs, and various issues, which is why it is not recommended.
You are free to play it if you wish, but please understand that support for Warfare-related issues will not be provided in our support channels.
Are permanent puddles the only option now?
Got it, thank you. Wish I knew why it crashed on attempted load up.
This is all i can give ya
test on default gamma and see
Alright, thank you.
anyone know how to make all soulslike data disappear? i dont want my old stashes to still exist and just want to remove the mod
can anyone help me figure out why my fps gets cut by half when i look at exit to garbage in Rostok? The FPS drop starts happening after 1 or 2 hours of me playing
hello! just got this error when opening the game today, it run fine last night. any idea?
!d3d
@ashen niche
If you get the error 1364 "The application made a call that is invalid...", try the following in order until the error is resolved:
- Try restarting your PC.
- If restarting your PC does not help, try disabling the applications with overlay (Discord, MSI Afterburner, etc.) as well as applications like Wallpaper Engine etc.
- Install DirectX libraries (type
!depsin #🤖bot-commands ) - If disabling software does not help, temporarily switch to DirectX 9 (use
!dxin #🤖bot-commands for instructions on how to switch).
After a certain amount of time, you can try to revert the changes and switch to DirectX 11. The bug may be fixed.
oh, thank you. hope this will fix it. edit the game run normally now 
what mod adds these icons? i genuinely have no clue what i did
doesnt send modlist or describe what changes he made
brodie i dont know what any of that means
how do i send the modlist
i was hammered adding half of my mods if that helps any
Hello, im running phills honey badger and Kmacks SIG and gettting this crach- he said to remove "uni_anim_core.script" in the honeybadger which I did - any idea for the crash?
!getjam 
@bleak venture , follow instructions:
- Download the archive https://cdn.discordapp.com/attachments/928715640968212582/1266326376223608915/Universal_Animations_2.7z?ex=695249d7&is=6950f857&hm=d3c1f10732d466fb36fb80b75e5c46a2ea248b7a0c033aa287c5f1c60b6a9188&
- In MO2, press
Ctrl + M, choose that archive, install it, enable that addon.
Make sure that addon has the highest priority (it should always have the highest priority number)
- Enter the game.
still getting the same error although have Uni Animations
Then you have not installed it correctly, can you screenshot it in your mo2
sure, UNI is prio 1 others are bottom (honestly new here, maybe I fucked up everything, trying to get any help, those guns look good)
(mosin trio wont even let me start the game, so no idea what Im doing wrong there either)
Fatal error see logs for more info and nothing in logs
Yeah universal animations has to have the highest priority number
Dude..
High Number = high priority = lowest on the modlist
Needs to overwrite your weapon mods
oh, then thats the problem- as I said- first time doing this
I have a problem with NPCs not looting corpses. I have even enabled More Aggressive NPC Looting but they simply ignore them at all
NPC Loot Claim is disabled, too
!claim
@rancid lark
To make NPC's stop claiming loot from dead bodies, disable:
G.A.M.M.A. NPC Loot Claim Remade
If you want to make NPC's actually loot the dead bodies:
- Disable
311- NPC Stop Looting Dead Bodies - DTTheGunslinger - Go to the Mod Configuration Menu - Useful Idiots and disable
Only companions can loot or gather items_ _|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| _ _ _ _ _ https://cdn.discordapp.com/attachments/1036388023903989862/1416835825156489358/IMG_20250914_191912.png?ex=68c84ab0&is=68c6f930&hm=09b2c1f6206a9214506bb9b1acd0b171c2e77b23618920f54555013428c569f5&
Boutta check it out
Thanks a lot
anyone using panceride grass and trees? cant get my game to start with it
report in the mod thread
Hey guys! Does anybody know where in settings can i lower the intensity of this? I reinstalled atmosferics and now everything that has a light looks like that. Nothing is enabled in reshade, i tried to mess with SSS bloom settings but they dont change anything
!aoe
@olive talon
The presence of engine modifications other than the official ones from demonized (included in GAMMA) disqualifies you from receiving support.
- For support, please contact their authors.
- If the problem persists even after completely removing all unofficial engine modifications, we will consider your request.
Important note: Discussion, mention, and promotion of these modifications are strictly prohibited. Please, do not ask why.
lmao
Whats the issue here?
Whats aoe?
I can clearly see you are on aoe server
come on
click on mutual servers
Ohhhh that thing
Sorry then, kinda hard to remember all the abbreviations
Sorry for bothering you guys
Hi guys, i got sidorovichs shipment package, but after picking it up the qyest has disappeared and now i cant get rid of it from my inventory, anyone know how i can remove it?
Hi, has anyone encountered this?
delete old mods
Some incompatible (and old) mod
D:\a\xray-monolith\xray-monolith\src\layers\xrRender\SkeletonAnimated.cpp
Line : 787
Description : fatal error
Arguments : Can't find motion file
'anomaly_weapons\hud_animation\new_l96_hud_animation_3ds.omf'
section 'wpn_l96aim_hud'
model 'anomaly_weapons\wpn_l96\wpn_l96_sk2_hud'
only recent mods I have installed is Kmaks g3, this looks like the error is caused by shader scopes
my 3DSS version is 3.20.7 might be older than what he is using maybe
Supp guys.
Anyone know why is my hideout (Just one chest) absolutly **TANKING my fps** down from 100 to 10-15**
Same if i place down a BackPack as a stash too ... ???
Taking them back ''refund'' my fps XD
Didnt found anything here
just remember i want to ask about chest/container around the map that is empty, is it supposed to be a loot in there? or do i need mod for it to have loot?
For Future info.
Found out what happening while serching here for Stash Fps instead of Hideout Fps 😛
You need to disable Custom waypoint Backpack icon from PAW mods
I've given Degtyarev the quest item at Jupiter Plant. But he hasn't disappeared and continues to be my companion. How to fix it?
Anyone know why there is a distance tracker to my companion above the minimap? Just started a fresh playthrough and dont remember that being there last time ?
it's been a thing for at least a couple years, far as I remember
Default gamma , part of “useful idiots” afaik
Or just the gamma hud ?
Forgor but yeah it’s a thing for a while now
lol thats so weird my last playthrough didnt have it on and that was from just last week and it didnt have it . guess i turned it off. thank you !
Also during the last playthrough I had the kapris upgrade kit that was being sold by every trader. Gave the kapris a lazer grip upgraded optics and drum mag. its not showing up there now and doesnt exist in the debug . Any ideas whats happened to that ?
!mags
@mystic iron
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
got this error after i tried to open the game, had no problems 2 days ago and tried to update the pack and do the pre-0.9.4 saves fix and still getting this error
I would like to disable only the stealth related mods in the default gamma settings. Are there any other mods that I should disable besides the "+45- Stealth Overhaul - xcvb" mod?
why disable the stealth mods? It's a hella usefull thing to have
That’s right. I’m just curious and want to try it out, haha. I looked it up and it turns out the Visual Manager is also included in the Atmospherics mod.
At that point just don't crouch xD
error is that?
So, for some reason any time I fast travel with Night vision in my inventory or on it crashes my game, when I load back in they are already active even if they are not equipped is there any way to fix this?
guys i just added a few addons (all visual like terrain texture redone and such) and i get this error when trying to load my save. tried starting a new run and it works fine this only happens when i load into my old save.
Double check KVMA instructions.
Need to disable some base gamma mods and start a new game.
!hd // check thread and moddb page
@shy anvil
Remove the NEWCOMER role to access the link - https://discord.com/channels/912320241713958912/1029827096488452137
You have two options, do NOT install both, choose only one:
is starting a new game a hundred per cent necessary? cant w
Yes
oh man
Can’t change/remove models mid save
Ah and fyi : in general custom mods should be at the bottom of your modlist unless specified otherwise
where it says disabled?
Yeh or make a new separator
hello, i turned off the shaders cuz of performance issues and thermals dont work anymore..
any advise?
Does anyone know why the vz61/68 is so resistant to being modified? I made a small mod to let guns that should absolutely be holster-able to be put in the melee slot like pistols. The Skorpion is quite literally made for exactly that but for some reason I can't seem to override it's slot! Everything is at the bottom of the load order too.
Got it, thank you! Sorry
anyone know how to fix this
Talked to the supply trader in Zaton and crashed with this.
THX 🙂
Last Dawn: (Talk to Spore in the Swamp Clear Sky base)
please help me i just not see av dialogue options for that quest start. maybe i can start it from debug or console?
npc loot claim
can someone send me the FDDA redone patch for BHSRO
hello what is the most basic mod for winter? i do not have anyother mods i play only vanilla gamma but i love winter mod what would you sugest if you can help me with this ?
I tried project INVERNO
Its not too hard to install, and looks absolutely stunning
You just drop it in and disable a few mods from stock gamma, its all in the mod description
!snow
@hearty briar Remove the NEWCOMER role to access the links - https://discord.com/channels/912320241713958912/1029827096488452137
Choose only one:
- Project Inverno for GAMMA: #1187868665975156756 message (recommended for DX11 players);
Support thread: https://discord.com/channels/912320241713958912/1316762917110288414
- Yet Another Winter Mod (YAWM) for GAMMA: #╟🔰☢newbies-chat message (recommended for DX9/DX8 players).
Foregrip on BRN-180 doesn't have a texture for some strange reason, anyone got an idea as to why this is?
Is it blue
Hey, I keep trying to install some weapon packs (Namely Small Caliber Handguns, and Juan's Weapon Delivery Service) but every time it keeps giving me this:
Expression : R
Function : CHW::UpdateViews
File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRenderDX10\dx10HW.cpp
Line : 1364
The application made a call that is invalid. Either the parameters of the call or the state of some object was incorrect.
Enable the D3D debug layer in order to see details via debug messages.
stack trace:
!d3d
@true musk
If you get the error 1364 "The application made a call that is invalid...", try the following in order until the error is resolved:
- Try restarting your PC.
- If restarting your PC does not help, try disabling the applications with overlay (Discord, MSI Afterburner, etc.) as well as applications like Wallpaper Engine etc.
- Install DirectX libraries (type
!depsin #🤖bot-commands ) - If disabling software does not help, temporarily switch to DirectX 9 (use
!dxin #🤖bot-commands for instructions on how to switch).
After a certain amount of time, you can try to revert the changes and switch to DirectX 11. The bug may be fixed.
Thanks, I'll try this first!
Hello all, whats up with the jank of the game? Hard to describe, but its most noticable walking on stairs or inside doorways, the camera goes all janky. I assume thats just a base engine thing that everyone has?
Good Evening, got a bug with the MP5 its like way to high and if i aim downsight i just see the stock. Has anyone an idea why ?
is anyone's level transitions fucked?
can someone help me with a fix to this?
When I try to go to great swamp or darkscape I cant there is an invisible wall
Yeah its blue for some strange reason
Because I forgot the texture. It's included in the next 3dssg update
Is this a modded gun or a gamma gun?
All good, hopefully it all goes smoothly and you can get the mod update out without any hiccups!
It worked! Thanks for the fix!
is there any way to remove an item from my inventory? it is a bugged quest item that cant be discarded the normal way. dying doesnt get rid of it either
Hello my game just crashed when going from Rostok to Garbage and can’t start anymore. I even deleted the last auto save but the game just doesn’t start anymore. I tried launching Anomaly and that works.
!psa
@sullen helm General PSA:
No one can provide help if you don't provide a list of changes you made to your modlist.
At minimum you need to provide:
- A description of what you did in-game when the crash/issue occurred
- A description of what the issue is (no, just posting a log doesn't count)
- Your Anomaly log (
Anomaly/appdata/logs/xray_yourname.log) from right after you crash - A description of all changes made to your modlist - this can be a list of changes, your generated modlist from MO2 (check
!modlist), or a description of what you changed.- Yes, this includes all mods you enabled OR disabled, whether or not they came with GAMMA
But I didn’t change anything, I was playing normally and now all of a sudden crash and can’t run the game at all. It goes to desktop as soon as the screen goes black
Hello 👋 I'm trying to get Kmak's new G3 mod set up, but Gamma fails to open now that I have these mods. I have this error message but have no idea what it means. Any help would be much appreciated.
!crash // send the log, i dont think that message means anything
@strong whale, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash ⠀
then why are you in modded support if you are on base modlist?
also, I am not sure why you have 3dss and authentic reticles a second time? when they are already in gamma by default
Cause I did mod the game. But I was playing for 2 days now with no changes and now this happened out of a blue. I was going back and forth between Garbage Rostok to move the gear and then it just happened and now I can’t seem to be able to start the game anymore.
Oh, they are? I'll try removing that first.
well then you need to say what changes you have made to the base modlist, and also provide the crash log like it says
if you wanted to update 3dss, just put that version at the same position as 410- 3DSS for GAMMA... and then disable the old one
There is 5 log files in Anomaly/logs
No files named .log at all just one blank text file “xray-owner”
It’s empty
I mean blank
can you screenshot the whole folder
Anyone knows why none of the magazine mods are working? I keep getting this
Hold on..
!mags // you installed it incorrectly
@solemn viper
How to enable magazines in GAMMA: #╭📖faq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
cannot upload an empty file😏
yes I said screenshot the entire folder not send the file
Do i have to delete all of Gamma again and install it if I enabled that mod and turned teh game on?
no, just enable them correctly
!modlist // send this then
@sullen helm Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
But I did t change anything in the meantime. I was playing like this for 2 days and for 5 hours today and suddenly boom!
Does anyone know what this is I'm playing Gamma beta version 3.7 with my friend and this happened I've never seen this before it happened after i tried to stop the MTSR2 machine in the ter labs from making the mutants in the gamma beta version
My game crashed afterwards
I think it's related to the green fog
Any ideas, I mean nothing was changed for 2 days, now afrer a whole day of playing the game doesn't start at all... no crash report, no log nothing.. just goes black and back to desktop..
is there any way to remove an item from my inventory? it is a bugged quest item that cant be discarded the normal way. dying doesnt get rid of it either
Does this setting have anything to do with image quality or is it just performance thing?
!avx
@sullen helm Actual explanation at the bottom but simply put:
Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.
Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.
Here's the funny thing. I played EFP for like 4 years always with AVX on, now GAMMA again always AVX on. Been playing gamma like that for a week now with no issues. Now all of a sudden the game just randomly crashes and can't work unless I disable AVX in launcher. Also I notice no difference in game in either qulity nor frames so I guess it doesn't matter..
i think it has been happening to a few people now i dont know why
It happened to me just randomly. I didn’t do anything. Not even in game options.
ig maybe an issue with newest demonized exes im not sure, did you install the latest ones recently or smth
I got question: here can i find the file for the tent?? can someone help.
just got this when equipping the gauss gun for the mission in jupiter.




