#π¨modded-gamma-support
1 messages Β· Page 257 of 1
it's funny you're asking this, because you still haven't answered questions that would help determine that
you just posted the same crash twice
nobody asked me a question
I did
You're nobody 
That's the proble,m with this chat is every time I post an issue you just instantly jump to 'you fucked your game' when the mods I have dont have anything to do with this
and if I post in regular they're like 'omg u have mods'
Have you reset gamma to default and made sure it works?
it's not an all the time crash, just random crashes
the game works but I crash randomly could be an hour or two of playtime before a crash
you're 100% sure the mods you have "have nothing to do with this" yet you're asking for help and refuse to provide a modlist which is required (read this channel's description) to confirm that it would indeed be so
and you come here going like other people asking questions are the problem, rich
Im just trying to figure out what my log and the crash report mean
and you refuse to let other people help you
you're overtly hostile
would you like to answer what I asked for so I can help you, or are you going to keep being passive-aggressive?
you never asked a question you demanded
and I'm not even sure what you're demanding
oh well, others will have the patience
BTW that crash doesn't say much and could be anything
Okay I'll try to figure it out and see if I get more info later
did the small hotfix update and my game crashes when clicking start on the anomaly launcher. it also gives me no error popup but I have the log from the anomaly appdata folder which says:
ame started: 08.07.2025 11:00:23.287
-----loading c:/anomaly\gamedata\configs\system.ltx
[DLTX] [c:/anomaly\gamedata\configs\system.ltx] Encountered !![scope_sks_b], mark section to delete
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::Load::<lambda_7c2e42607f89d05d0da0d18558a2ff36>::()::<lambda_445dd78f7711254db71cf9683a102fc9>::operator ()
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 373
[error]Description : fatal error
[error]Arguments : [DLTX] Duplicate section 'bossxe' wasn't marked as an override.
Override section by prefixing it with '!' (![bossxe]) or give it a unique name.
Check this file and its DLTX mods:
"c:/anomaly\gamedata\configs\system.ltx",
file with section "mod_system_weapon_addons_athi.ltx",
file with duplicate "mod_system_weapon_addons_prs.ltx"
stack trace:
stack trace:
SymInit: Symbol-SearchPath: '.;C:\Anomaly;C:\Anomaly\bin;C:\WINDOWS;C:\WINDOWS\system32;', symOptions: 530, UserName: 'usern'
OS-Version: 6.2.9200 () 0x300-0x1
C:\Anomaly\bin\AnomalyDX11AVX.exe:AnomalyDX11AVX.exe (0000000140000000), size: 20574208 (result: 0), SymType: '-exported-', PDB: 'C:\Anomaly\bin\AnomalyDX11AVX.exe'
at address 0x0000000000000000
I am using frosty's weaponpack, and I am guessing that I should use the override for the fwp mod but I am not really sure
Update fwp
I installed the surgefix and hopefully that helps 
every single time i try to equip a saiga merc, my game crashes with this error:
!saiga
@earnest zealot
If you have a broken or weird-looking Saiga, or if the game crashes: Can't find motion file 'dynamics\weapons\wpn_saiga_hud_animation.omf' section 'wpn_saiga12s_m1_1p78gs_hud', then do this: #π¨base-gamma-support message
graphical glitch ?
have some smeary bush types things on my viewpoint hard to see in a screenshot i know
Hey guys. My game crashes every time I equip Item No.62 and open my inventory.
I recently installed 'useful idiots' and '3D interactive PDA'. Any idea if maybe that could cause a crash?
Thanks in advance!
every time I try to do anything in the buildable hideout radio menu (play, select a playlist etc), the game crashes with this error
nothing is overwriting the file thrown
tried searching for my issue, nothing
all the radios in my game are also acting weird, like they will only play every other time I open the game
I'm sure it's something with the order of radio mods I have but can't figure it out, adding a screenshot of all my mods that have something to do with radios + modlist
(Radio Revamp is supposed to be loaded before Hideout Furniture?)
wtf is these white trees constanly on my screen
my usp match doesnt have the upper cover rail thing how may I fix this?
@dusk marlin To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
Started having this problem out of nowhere
i can only find one other person who had this same issue, i told them to try using debug to spawn in wpn_gauss ("Gauss Rifle", the one that drops from Living Legend) rather than pri_a17_gauss_rifle "Item No.62"
and then they never replied with what happened so. i'm hoping you'll try it and report back
update kute's free zoom: https://discord.com/channels/912320241713958912/1327930609284157482
I replace the current mod in MO2?
It's not the same name for some reason, I'm gonna rename and see if I can make it replace the older one
just make sure you give it the identical name to the gamma one and replace when prompted
Yep all good
deleted shader cache , didnt work same screen and weird trees
Gonna test if it still crashes. Thanks
You updated your SSS to SSS23?
gonna do it now
because that's from the base Anomaly game
it doesn't show up in most people's file searches because it's provided by compressed .db0 files in the Anomaly folder. I unpack mine specifically so I can search for them
I see
So, you're missing a basegame anomaly file
just grabbing the keybinds file then gonna update it
Thx. Now i need to figure out how the hell that happened
I'll test it now, thanks
fwiw i swear i've seen that get_jamming etc. error before but i just can't remember for the life of me what causes it
oh yeah also if you enabled the mod "overheat gunsmoke" - turn it off
i didnt have the update_3 version of sss23
may of been the issue
Delete the 22 and 21 versions
And if you use a custom profile in MO2, make sure to enable the same mods in the base GAMMA profile and delete your custom one
And make a new one
Do you use the G.A.M.M.A profile or did you create one yourself? Because custom profiles don't update with the base one
in "GAMMA Redone":
- find Screen Space Shaders 23
- move it to where Screen Space Shaders 20 normally is
- disable Screen Space Shaders 20
- enable Screen Space Shaders 23
yes, except this copied one does not update just because the default list did. It's frozen in time, at the point when you made the copy.
Just do the same thing again and delete your old custom profile
right , and well i cant move it when ive had to reinstall gamma lmao
where in m02? or files
mo2
well ill update ya , when gamma is finished updating then can do that
as flop suggested i manually install sss23 from modb as the update file wasnt there in my gamma downloads folder
as it was happening on my base gamma too
**do not double post in both here and #π¨base-gamma-support **. you will only get conflicting answers that can, for modded playthroughs, have the potential to brick your save.
its all good, my save is literally 20mins lmao
and by "modded playthrough" i mean "you've changed any of the mods in gamma at all, at any point in that playthrough"
also we seriously don't like wasted effort on running around because most of the time it's just two people manning both.
It seems to be different now wpn_gauss_quest is Item No62 and wpn_gauss is Gauss Rifle. And I received Item No.62 from the Living Legend Quest (just before I needed to kill eidolon)
I just tested the Gauss rifle and it seems fine, but I also tested Item No62 and it didn't crash. It only sometimes crashes.
apoliges i was just seeing wierd white trees on my screen lol
did you have "overheat gunsmoke" mod enabled previously?
again , huge sorry wont happen again
Nope
well, if it's not a consistent error, hard for me (or anyone) to pin down
Oh well, thanks anyway
I will update when I get back into mo2 and find the file and move it to the location required
yes, reinstalling DAO fixed this.
To manually reinstall problematic mods do this:
- Go to the link(s) the Helper has provided above (or below).
- Download the mod file(s) from moddb. DO NOT EXTRACT.
- Place every archive you downloaded into your \GAMMA\downloads folder. Overwrite if needed.
- Run the GAMMA Launcher as admin.
- Uncheck/Disable:
Check MD5,
Force git download, - Click Install / Update G.A.M.M.A.
https://www.moddb.com/addons/start/231396
Game boots no crashes lmao π€£ gonna find the right sss23 file for mo2 now
That's after me manually enable all mods I have on my new profile
hey @tropic kite sorry to bother you but i did notice that sss23 conflicts with atmospherics GAMMA
because you're supposed to load atmospherics AFTER SSS
larger priority number = overwrites lower priority number
also conflicts aren't bad in anomaly modding. conflicts are in fact necessary for some mods, like patch mods, to work
so put atmo after sss23 or before it
mo2 sorts in descending order of priority by default, so mods at the bottom of the list have higher priority
so it turn , put ss23 below atmo ?
other way around. put atmospherics below SSS 23.
atmo 670 ss23 669
any fix ?
doesn't matter how far lower.
for the record they are literally next to each other in default gamma.
!hideout_crash
Open the game, in the main menu open the console and type hanging_lamp_ignore_match_configuration 1. Then load your save, remove all the TVs and lamps or light sources you placed. Save. Then type hanging_lamp_ignore_match_configuration 0.
ohhhi i see,
i dont touch atmo shaders weathers and reshade latest?
leave it where it is
gamma already uses the latest version of both SSS 23 and atmospherics, which it will update, if you update gamma. you did not need to install atmospherics at your own at all
oh
atmospherics mod has not been renamed, unlike SSS 23
so on your custom profile, it was already in the right spot.
okay ill run game and see if the white trees are there
as i know it boots to main menu
i mod fallout 4 with 672 and somehow it runs with no crashes , this is a new enemy modding stalker
I got the atmospherics from mods posting for gamma unless that's wrong ? I followed there guide to install it
gr8 -_- whats this mean
Does GAMMA come with demonized modified exe's? Trying to install Arrival but not sure if I'm doing it right
yes, you don't need anything extra to install Arrival except follow the instructions on where to place it and what to disable (DAO and maybe something else, don't remember)
i only have grass and trees by panceride enabled
i killed one mercenary in dead city
Holy moly finally
It was my redone mods, walking dead has to be above south and north , else ctd when clicking new game
so tired of these crashes... use to play with 100 additional mods and now I can't even add 5
what mods did you install, we usually see this for people who installed Arrival without disabling Dynamic Anomalies Overhaul like the Arrival mod description tells you to do
yeah you're back to "missing files from SSS 23"
oh ffs i have the file im sure of it
alternatively potentially from a backed-up MCM values mod that doesn't account for the new SSS 23 values
although in that case it's supposed to autofill with mod defaults
no idea how to fix-- wait im cooking i found it and switched them round , loading again
I disabled it, but I wasn't sure if I did it correctly so I followed the instructions to make a clean save and now this...
Any clue whats causing this?
fair enough
stack trace might say something lemme have a looksie
nope
not to me atleast
FATAL ERROR
[error]Expression : destroy_queue.empty()
[error]Function : CObjectList::~CObjectList
[error]File : D:\a\xray-monolith\xray-monolith\src\xrEngine\xr_object_list.cpp
[error]Line : 37
[error]Description : assertion failed
stack trace:
SymInit: Symbol-SearchPath: '.;C:\Anomaly\bin;C:\Anomaly\bin;C:\WINDOWS;C:\WINDOWS\system32;', symOptions: 530, UserName: 'kaiba'
OS-Version: 6.2.9200 () 0x300-0x1
C:\Anomaly\bin\AnomalyDX11AVX.exe:AnomalyDX11AVX.exe (0000000140000000), size: 20574208 (result: 0), SymType: '-exported-', PDB: 'C:\Anomaly\bin\AnomalyDX11AVX.exe'
what you did to your game before it started crashing and/or what you were doing when it crashed can be helpful
i found it in m02, enabled 23, disabled 20 , moved the newer one to where the 20 one was, started game and it ctd same crash window
i fast travelled to one of my PAW quick pins at my hideout in Dead City
as soon as the loading screen popped up, instant CTD
i wuld like to add that loading back into the ctd save that was made, it doesnt crash
then we def can't investigate much more.
yeah no thats understandable
just treat it as an xray moment and keep going
guys need some refresh ...doing another invictus run and never really tought about killing the " old legend" man is there any downside by killing him and exploring that Polyssya hotel room?
you're probably better off asking #ββ’stalker-chat , this is modded support
that is probably what it was to be honest
in games like this I don't even bother troubleshooting unless I consistently crash at a thing at least twice
how would i get these files π
could it be your AV deleting stuff? Obviously Veer is helping you but im just spitballing
Uhhh could you dumb that down I'm not versed in stalker mod lingo
Antivirus
Im just thinking maybe your antivirus is deleting files
might be wrong though
Hang on my game boots to menu and lets me press new game without ctd
Progress
This game makes me wanna chain smoke lmao
same ctd or different ?
looks like its the same
apparantly is somthing to do with sss23 but ive got the latest file , updated gamma and still back to square one
any ideas veer?
The script is from SSS23 yeah, you followed the !sss command's guide to a T right, no deviation?
!SSS
@robust zephyr
1.) Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck/Disable these options:
- Check MD5
- Force git download
6.) Click install / update G.A.M.M.A.
as im using the redone collectio, north south , walking dead
yes i did that
to a t
No clue then man, sorry
ffs it was working before today then bam issues for hours
same as before, seems your copy of SSS 23 is unable to essentially read or find the TAA Sharpness setting, which should be provided by a settings file OR default MCM values (if the MCM value does not exist, it reads the included settings file and sets the MCM value to that)
to which the go-to move is "reinstall SSS"
i think i had the "extremely manual" workaround for someone earlier
So do the sss23 bot command and follow it to a t? Would deleting shader cache help too?
- Go to https://www.moddb.com/addons/start/228793 and download the mod
- In MO2, go to File -> Install mod... (or press CTRL+M) and choose the file you just downloaded
- In the Name field, enter exactly
190- Screen Space Shaders 23 - Ascii1457(check image) - For the options, pick everything except:
04 - SSR Water - [ ICE VERSION ]10 - Wind - [OPTIONAL] Vanilla Emission
- Click "OK", then "Replace" when prompted
- Delete the
Anomaly/appdata/shader_cachefolder to clear your shader cache - Launch the game and check again.
https://cdn.discordapp.com/attachments/928715640968212582/1390424646574407750/image.png?ex=686eccdc&is=686d7b5c&hm=1f290c92f58e65a6e93d15695ba39f1822139870596f9bec5baeb4bae256e17e&
Hello, I have finaly managed after multiple hours to get a saiga but when I try to equip it I get this error( Sorry for my bad english)
doing now
!saiga
@mint bane
If you have a broken or weird-looking Saiga, or if the game crashes: Can't find motion file 'dynamics\weapons\wpn_saiga_hud_animation.omf' section 'wpn_saiga12s_m1_1p78gs_hud', then do this: #π¨base-gamma-support message
yeah i got nothing.
same crash
now in fairness, did you ever post your full modlist?
!modlist
@dusk marlin Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
- "Fixed Vanilla Models and Textures" is already in GAMMA ("31- Fixed Vanilla Models and Textures - Blackgrowl")
- Disable "Atmospherics GAMMA", you have double-installed Atmospherics
- "Weather Expansion for Atmospherics" is outdated and unsupported, likely to be the cause of errors on SSS 23
- "Mags Redux 2024 - (Place At 202- OPTIONAL TAB IN GAMMA MO2, DISABLE OLD MAGS REDUX)" - DO NOT USE THIS, follow
!magscommand, yes even for FWP
clear shader cache after disabling Weather Expansion + your personally installed copy of Atmospherics, try again
Thank youπ
restarting now
did you follow the mags FAQ steps (enabling both "Anomaly Magazines Redux" and "ATHI Mags Redux Mod Madness" and disabling GAMMA Unjam/Reload on the Same Key?)
i mean on the modlist you just sent me, "Anomaly Magazines Redux" wasn't enabled
alright ive turned it on now the one the faq stated as theres 2 in the modlsitt
Restarting
Progress I've managed to create a character and loading up π
lesson learned: always just get the fuckin modlist first
Maybe this is the one
Yup modding is a bitch
Fallout 4 modding is easy for me this is a whole other aspect lmao π€£
Text has appeared on my loading screen
OMG
You miracle worker @tropic kite
i'm going to take a big nap now
π»
Beers it is a whole crate has been named in your honor form fixing my ADHD brain
I'm in game π
And no more white trees yayyyyy
Thank you veer you beauty of a person π»
honestly i'm fairly sure at this point your original "white trees" problem was caused by weather expansion or double-installed atmospherics to begin with
but at least it works now
Uhhhh
May have a small issue NPCs are not appearing for some reason
May be a weird spawn I'll retry a loner
everytime i enable mags redux i get this error how can i make it stop and be able to play the game with mags redux
i dont know the command
!mags
@uneven herald
How to enable magazines in GAMMA: #βπfaq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
hiw guys, how can i add TASKBOARD tab to the PDA after installin 3D PDA mod?
Should appear auto no?
thanks
No problem π dude
nah, i can get into it by using shortcut defined in mod config (main menu) but i cant go back to main pda screen after that π¦
Sounds like busy hands maybe ,hmm ingame when you have your pda out , what are the tabs you can see
let me take ss
no worries
as i've mentioned, using shortcut while off-hand i can open taskboard, but i cant get out of this window
When I try to log in to Cium, it gives me this error:
yeah that's what happens if you use the taskboard shortcut
it ONLY takes you to taskboard
guess it doesn't work super great with interactive PDA, or you will have to find a patch
yeah im reinstalling it rn, theres checkbox 'fix for itheon taskboard' not sure if i checked it before we'll see
btw when i use this shortcut, how can i exit from it then?
so yeah it appears right now, propably i didnt check it and forgot about it or needed newest version, thx for the lead π
i sufer huge fps drops some time after playing (around 10 min after loading). i go from 70 to 15. what do?
Try to enable debug mode and do F7 -> F5
helps for a while, then same. I figured that my gpu is at 100% in meantime. any optimization i try just increases fps before it hits 100
Your gpu? Do you mean your cpu?
Yes
What's your cpu and how much RAM do you have?
GPU, graphics card
The game takes almost nothing out of my gpu. Only my cpu is being heavily used. So I don't know why your gpu would struggle
Check to be sure that you have the latest drivers for your gpu just incase but idk
my CPU at like 20% at most, and RAM is at steady 75%
Send a screenshot of the performance tab in your task manager
Because currently with the game open my gpu is at 1%
Follow this #β°β‘fps-optimisation , generally because alife and ai is in combat, heavy on your cpu
Also please tell us what changes you have done to your modlist because we cant read your mind.
Simply ask βwhats wrong with my gameβ wont help anything
Followed to the tea
^ @half ember 
everything to play on DX9 + low res texture (from the guide) +UA localization + REDONE combat AI + REDONE Alife pefomance. I turned off all shaders mods and high res mods for mutants
Your gpu being 100Β°c is not normal
Turn off redone combat ai, might be the reason
for this computer 90-100C is normal (i checked it is in the manual)
I don't think so since his problem is with his gpu and not cpu
i will check
What manual, since the manual is about cooking meat on gpu, not for your gpu
90-100 is not normal, you are probably getting heat throttled
yeah it should be in the ranges of 50 - 70, maybe 80 in some high demanding games
could be but even if i run game from cold on max cooling gpu still 100% after couple min even if temp still at 70
my game sound total really gone no sound no songs no sound effects game is silent! and this all mod i add
in the manufacturer manual the working temp is around 90-95C. + plus i have been warned about it many times while purchasing laptop
If your game is gpu limited then i recommend lowering down the resolution
tried but it looks realy bad and i cant use irons effectively beyond like 20 meters
maybe some tips to help with that?
I used to play on low res. Its fine for me
my screen is 16:10
try sound problem workaround in anomaly launcher
but TY for help, anyway
you too TY
hey guys, keep getting crashes , usually with level transitions, but sometimes just walking around looting after a battle. adding my crash log, maybe someone can help.
and now oddly my sights aren't zeroed? shooting about a foot to the left?
Hello, just got this when trying to sleep for the first time on my ironman playthrough,
Mods I have added: Frosty's Weapon Pack w/ EFT Icons, Gamma NPC's Cannot see through foliage, Hunger_Thirst_Sleep UI.061 (Because the latest was broken), Realistic MAGs settings for Redux, New Item Highlight, and the base gamma mods
I keep getting a Shader compilation failed when I try to load gamma, I was messing with the graphics settings in the mod manger in game, How can I reset it if I can't launch the game?
pretty sure the hugner thirst sleep UI patch with Demonized is causing issues with it, double checking
do not use that old version of hunger thirst sleep ui.
the downpatched version is already included in gamma.
using the new version already included causes the bars to be offset
want an example?
!modlist // share your modlist instead
@lofty dawn Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
gamma by default has it enabled with no issues to the bars.
here you go
your offset stat bars bug is caused by enabling Better Stat Bars. Don't turn it on.
Also, don't use the version of "G.A.M.M.A. NPCs cannot see through foliage" in the Disabled category. Use the Tosox version.
"179- Better Stats Bar - Demonized"
My Beefs NVG 's or night vision goggles are behaving weird... when I press the gain key it clicks and adjusts but the World does Not get brighter or dimmer, BUT the Sky Does get brighter. Please Help.
So how do I enable those bars then? since i dont get bars at all now, and only numbers
yeah they're MEANT to be numbers. GAMMA 0.9.3 change.
ohhh okay
otherwise you can't figure out your resistance cap.
makes sense
and now a big part of buffing yourself is raising your resistance cap.
good to know I appreciate it
Sounds like my experience ATM. Random crashes transitioning levels. Load fine from the auto save though if you turned that on. Also, yeah, randomly shoots like 3 ft to the left of scoped crosshairs randomly
yeah the zeroing i fixed by saving and loading, annoying but meh, still getting crashes tho, thankfully i am a compulsive saver.
What's the diff. I remember it causing issues seeing stashes thru foliage and looting bodies. Still seems ot be issue with Tosox verison
How would I increase the npc loot distance or disable npcs claiming loot?
anyone else have a problem with interactive dot marks and hideout furniture, whenever i open a weapon rack it automatically takes all guns and dupes them sometimes
And will doing either ruin the save?
settings > gameplay > general > corpse loot distance
Bet thank you
I'd like to know this myself
How to unninstall sss22 and install sss23?
Do I have to delete it?
How can i bind unjam weapon and use to both F
because right now i want to make ammo check and unjam the F key
so that my character will check the gun and show me how much ammo is in the mag
however if i bind the unjam key to F
it overwrites the use key
yo, my entire game just went hella blurry for some reason
ive tried deleting shader cache, restarting game, loading a different save but nothing works
Do u have more mods installed?
yeah i have pancerides summer shader pack + redone north & south
it happened after i died
this is what it looks like
Maybe disable motion blur?.. mask overlay
Check the settings of the shaders if there are blur stuff
Normally u just extract the mod in the desktop and check the files
so i updated gamma, and also tried disabling the shaders, both of which did nothing
!blur
@dusky vector Follow this: #βπfaq message
Its probably an sss thin
ok i just tried all of those and nothing works
Clear cache
yea i did
Do you have reshade
im just gonna leave ts till tmrw
yea
welp.. try a different present thatβs clean
Update gamma and youre done
Dont touch sss on your own
How can i bind unjam weapon and use to both F
because right now i want to make ammo check and unjam the F key
so that my character will check the gun and show me how much ammo is in the mag
however if i bind the unjam key to F
it overwrites the use key
hey guys, minor bug i am running into, usually don't use melee but testing it out, but when do a "quick melee" it doesn't animate properly. I hear the blade swish noise but my guy kinda just puts his gun down and picks it back up again
hey quick question in the gamma launcher it says "ModDB addons status: update available" how do i update do i just click the install/update gamma button or something else?
gotta unclick the middle 2 buttons on the side
force something rather
then install/update
reposting, if anyone has an idea
hey i have a question is there any way to get the screen space shader weapon dof on dx9
If anyone can help with this, it would be much appreciated. Every time i try to equip the saiga 12k "nerd" i get this. I'm playing with only the bodies on minimap mod enabled.
!saiga
@candid hinge
If you have a broken or weird-looking Saiga, or if the game crashes: Can't find motion file 'dynamics\weapons\wpn_saiga_hud_animation.omf' section 'wpn_saiga12s_m1_1p78gs_hud', then do this: #π¨base-gamma-support message
Weird exclamation symbol. Should I be worried?
depends on what you shoved into your game and whether you set it up properly
we can't read your mind or see your MO2
If it helps.
running gamma with redone, is there any way to disable bounty squads going after you? Tried searching for them in MO2 but everything is disabled as far as I can see... Any ideas?
Update, it just disappeared after reloading the game. This engine is wack lmao
looking through messages on the server from people with the same issue, it's just a console notification thing, disappears if you open the console or reload
Highly likely that your hf mod more radio channel is related
disabled
Gamma with redone and it seems "Offline Combat: Full" in options doesn't really work. Like alife only works on the current map im on. Any ideas?
i want to ask how can i make the mod i change back to it default gamma setting
the only mod I have installed is 3D PDA by Hort
this happened when i shot a bald bandit who was in dark valley at the factory
So I did a small update -MD5 ON, -Git Download OFF, -Zip extraction OFF, -Delete Reshade DLLs ON, and now I get the error:
The only additional mod is "UNBIND H"
You turned on god mode
!sss
@dry mortar
1.) Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck/Disable these options:
- Check MD5
- Force git download
6.) Click install / update G.A.M.M.A.
That is a base game anomaly feature
How do i fix this?
We can't read that so we have no idea how it's screwed up
its an SV98
one guy said that it's busy hands and my save is broken (and that's how it is)
luckly 1 hour old save works fine
A-life is the name of the system that does a bunch of dice rolls to simulate offline squads roaming around the world. What do you think "A-life" was?
!busyhands // Busy hands has nothing to do with the task list. Read the post.
@potent cape "Busyhands" is the name of a bug that softlocks your game by preventing you from performing basic game functions, common signs include:
- Broken health HUD (all red)
- Can't do any animated actions (use meds, eat food)
- Crashing on area transition
- Can't open inventory
If you have it, reload an older save. Eventually this may not work any more, you'll be in permanent busyhands, then it's time to start a new game. Read more here: #βπfaq message
It is sometimes possible to fix with a full reinstall, make sure to use!deletein #π€bot-commands
MAS starts to crash my game after i re enabled reshade
any idea
im dumb
my game keep crashing when i load at cordon or anyplace near can some one help me
didn't update modded exes like it told you to
i did it way back it didnt cause trouble
Modded exes update regularly, do it again
!ctdonkill // if it was Sultan you killed, might be why
(did I type the command wrong or why isn't it working, huh)
I had a problem where all devices parts that emitted light had very bright white glow. After updating SSS to latest version it fixed LED lamp color and made text on devices somewhat readable but it still has that bright white glow. Any idea what causes this?
!topic // you are in modded support - list off the changes you've made
bot died?
bruh new error
is this progress?
the game runs fine without MAS thoughοΌpreviouslyοΌ
Read the troubleshooting section of the modded exes page, do what it says under "install from scratch"
ok ok...
Bot is dead yes
after update gamma, i use fwp
so thats a reshade issue
I installed new ScreenSpaceShaders, the new game works but when I load my old game save it throws an error:
No, it's a "leftover files from old modded exes installs causes crashes when trying to use the newest version" issue.
Did you have custom mods that added new shit to the game before, if yes, turn them back on
Only "Unbind H" and it's already ON
Then you're going to have to wait for me to get on my PC and figure out if that's a section from a config that's from base gamma
Seriously, no one can help you if we don't have your modlist
thank god it worked you have my gratitude
and the other buddy too
looks like it's probably missing 3DSS files
reinstall steps below
- Download the mod manually from this link
- Open it in 7z, open the
3D Shader Scopes for GAMMAfolder, copy thegamedatafolder - In MO2, find the mod
410- 3DSS for GAMMA - Redotix99 & Andtheherois & party50, right click -> Open in Explorer - Paste the copied
gamedatafolder into the410- 3DSS for GAMMA - Redotix99 & Andtheherois & party50folder. Overwrite if asked - Refresh MO2 (F5 key or click the icon at the top)
- Try to play
Thanks but I encountered more errors even when starting a new game, I start reinstalling the entire game π
anybody met the situation when nvg makes sky brighter but the rest is blacked.. no mater if i switch nvg level by N key
thanks!
playing with reshade on?
does your game look fine without NVGs (including at night)?
!ctdonkill
- use commands for yourself in #π€bot-commands please
- bot died, search for results the command produces
yeah pretty much, no reshade
increase brightness
if it is still dark - inrease brightness levels in mcm for beef's
fixed
tag words for anobody who will meet this in furutre: nvg beef
solution:
- turn off beef nvg, turn off enhanced shaders, clear shader cache
- launch game, load save
- exit game, turn nvg and enhabced back
- clear shader cache
this should solve the problem
hello guys, i think i messed up smthng, i use c con shaders and mags thats all,
So while im in bushes my arms goes in full black mode, but when i get out they become slowly normal
i played whith tonemap and sun lumsclae commands, is it that ?
hey do people know how can i modifie my save file to disable a gamemode i enable is it possible or not ? i want to disable the soulslike gamemode spawn system in my save
hi, does anyone know how to fix the game being super blurry for some reason? it happened after i died during the chernobyl npp raid and now all my saves + new ones are blurry
i have pancerides summer grass and trees as well as redone north + south
i already have everything in sss dof to 0 and off, restarted game, restarted pc, and cleared shader cache
never mind i founded
just add to transform my save file into a .lua
??
what did you enable on top of the DX8/9 profile
did you die under the effect of something that caused a blur effect?
my only guess is that the blur effect is "stuck" somehow
yeah probably
not that i know how to fix that either 
ye that would make sense but its still blurry if i make a new game
i guess i gotta do a fresh reinstall then
so we've seen something kind of like this before
where if you had NVGs on in a previous save, then start a new game, the new game starts with the NVG effect on
fix was "load the old save and take your NVGs off" (yeah really idfk either)
im willing to try anything atp
do you have a save before death? can you load that, then go through any level transition?
sure
granted loading a save in and of itself is supposed to reload all hud/effects/scripts, just like going through a level transition, but we're really at the "throwing spaghetti at xray and seeing what sticks" stage
nope didnt work
well shit
:/
help me pls, my game crashes every time after update
!590
bot's still dead, follow this #π¨base-gamma-support message
!surgecrash
Bot is down m⦠again 
Just search in #π€bot-commands idk 
any help with this?
- Did you disable any of the GAMMA Economy mods in GAMMA Economy and Craft?
- Did you add any gun mods?
ty<3
Have a small problem.
I can't understand why my containers icon for artefacts just disappeared?
Any solution to this? π
did not added any gun and not disabled anything
are you sure about that. because i know exactly what causes this (loadouts_injector.script not being blank), which can only happen if you disable GAMMA Economy and/or install mods that add this script, which are 99.9% gun mods.
list the changes you made to the modlist, then
basically just enabled some mods id like to use and thats all
what mods?
but its weird, once i created the character with the same settings i choose my starting loadout and it worked, and after that it didnt
retrogue for example
retrogue's is causing it. reread the pins in that thread
fix it, HD icon's framework/Stalker 2 icon's broke it for some reason xd
also, do not enable stuff that's in GAMMA Disabled by default - they are there because they are outdated, don't work, break GAMMA, break the game, or all of that
aight got u, ty
Hi, is it safe to disable "261 - Ammo Check - Ishmaeel" mid playtrough or do i need to start a new game? Or alternatively is there a way to display or check your current firing mode?
is bas works?
this is what is shown by default
gamma already uses a specific subset of guns from bas. if you just enable the "new version" of bas in GAMMA Disabled, it will break shit.
and yes you can disable it mid save
sry, im blind apparently π
alright thx for your help π
lol in fairness it's not well labelled
i disalbed everything that i wanted to use from etc and still says this
please use the file search bar (right hand side of MO2) to look for loadouts_injector.script, screenshot the results for me
i got it, disabled it but should i delete or ?
if you want to play with the pack, you have to follow these instructions to avoid this crash #1036727845726204024 message
Reinstalled Aydin's grass tweaks for Summer foliage and now I have these images on my screen while playing. The image seems to change depending on what I'm holding or looking at. Possible mod priority issue?
that's... new
Can you tell me where your Grass Tweaks - Aydin and Aydins Grass Tweaks SSS Terrain LOD Compatibility - aytabag mods are in the priority list? I might have moved them up or down by mistake.
hi guys, after installing the hd models mod, when I start a new game, I appear on this platform in the void, regardless of the grouping and spawn selection. Without the mod, everything works correctly. What could be the issue?
quick question , randomly my screen is zoomed in , is that a fov thing or the free zoom mod being wierd thas with gamma
sometimes freezoom bugs out, either press the button again or re-set it to what you had it on in FOV settings
got it
whats that one popular mod that overhauls psi storms again
hey I just reinstalled but I'm having performances issues that I didn't have on my previous install (running at <20 fps in meadow)
could any of these mods have an influence?
I have an i5 10400F 2.9GHz - 8GB RAM - GeForce GTX 1650 4GB VRAM
also I followed the fps optimisation guide
hey guys, any help with this error? occurs when loadinng new game/save
please tell me you didn't install modded exes as if they were an MO2 mod
also don't use gamma free zoom 3.0
kute's free zoom is the actually maintained one
Apparently I installed Arrival incorrectly despite following the instructions to a T, because everytime I try to load into another zone, I get this error:
Followed the tutorial to fix it aswell if installation was done wrong just in case and still get the same error
I would like to not have to do the fix involving debug mode though as I play Ironman
did you disable Dynamic Anomalies Overhaul? this is the error that i usually see if that mod is still enabled
Yeah it is disabled
hmm. did you install Arrival on an existing save (without starting a new game)? If yes, did you follow the procedures to disable DAO from a save in progress (beyond just disabling the mod in MO2?)
I believe I may have, but I did follow the instructions for if I messed up but still no dice
the whole process with debug mode, starting a psy-storm, etc.
just to be sure, on step 8
- Find a place to hide and wait for the game to save automatically
did it save automatically? if not, did you make your own save?
yes it did, I then loaded into that save after re-removing DAO, or unchecking it rather
Hmm. Well. Unfortunately I can't help you further - I can only tell you that's the circumstance in which I normally see this error, with your exact combo of enabled mods
No worries, thank you for trying!
Is there a way I can start over the process without having to re-download everything?
Sorry, which process - of (re)installing Arrival?
If I reset my profile on mo2 (cant remember how or the command) will everything be set to default or will some things still be affected until doing a fresh install of gamma
ok so i just tried completely deleting anomaly & gamma and doing a fresh reinstall, AND ITS STILL BLURRY
I hope that makes sense
OK I FOUND THE FIX: the only file i kept that was remaining after reinstalling was the user.ltx file, which i saved so my keybinds would transfer over, but since it was still blurry i deleted the file and now its no longer blurry
!default // this resets your G.A.M.M.A. profile
@clear bridge
To bring your mod list, settings and keybinds back to default, inverting any changes made by you:
- Open the G.A.M.M.A. Launcher with admin rights
- Uncheck every box EXCEPT
Delete Reshade DLLs - Click on
Install / Update G.A.M.M.A
Note: If you wish to keep your keybinds and graphical settings, go to Anomaly\appdata and backup user.ltx.
yeah ive had copy of bin folder, might have add it by mistake lol
lets see if that was the cause...
don't do that, always install modded exes directly into the anomaly folder, do not use MO2 for it
yeah yeah ik, just selected everything from folder without noticing
still no luck, same error
ive disabled free zoom and remove this exes folder, xrs_rnd_npc_loadout... isnt it sth related to installing frosty weapon pack?
this is related to "you fucked up the load order OR the dependencies for Modular Attachment System", which I can already see you are missing MAS for GAMMA
I did have them in the wrong places, but I still have the issue. If you don't mind can you ss your priorities in the 552-570 range. It has to be something in this section is still in the wrong place.
i mean really it's relative position that matters
which is to say (lowest priority on top, same as default)
- Grass Tweaks
- SSS 23
- Atmos
- Grass Tweaks SSS Terrain Lod Compatibility
!saiga
please use #π€bot-commands if triggering the bot for yourself thanks
What setting can I change here to improve or deactivate this (campfire effect on grass)? https://youtu.be/Re_LKhwgVig
hey whenever i try to load into the game i get shaders compilation failed. if i try to go into debug map it is fine and works
could I please get a little help with this issue? i've been meaning to get back into gamma for a while now but i just can't get the mods to work like they once used to
what's your modlist?
remind me again does rotten life involve shaders of any kind
cos if yes i would assume it maybe needs an update for SSS 23
Oh. That, or, it's HeatVision's fault
"HeatVision_v1.3"
i'd actually probably suspect heat vision first???? i don't use either
remember to clear shader cache after disabling!
you're right, i'll do so manually
I think it's just textures
!mo2search // use the file search bar, look for loadouts_injector.script
@brisk nest Use the mod name search bar to find mods in MO2, and use the mod files search bar to find which files are from which mods. ||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/1098945649929617478/1165045267637211156/mo2-search.png
tell me what the results are
you need to do these steps if you use RWAP #1036727845726204024 message
check its pins for 3DSS compat as well
BTW heat vision doesn't work with sss23
wait really?
i dont' remember enabling anything like that. wasn't that base gamma?
How does thermal sights work then?
And unless someone updates the shaders, it's pretty much dead
Thermal sight has nothing to do with the hest vision mod
there is one version of it in GAMMA Fixes and that does NOT come with this loadouts_injector.script file
oh you meant the thermal goggles mod
so, that must either be a version you installed yourself, or an old outdated version that got shuffled to the end of the modlist
I installed a mod placed the folder in the launcher but a red X always pops up saying no gamedata even tho theres stuff in the folder i placed
either way - delete that file
what do you mean when you say "placed the folder in the launcher"
i'll delete the script and give it another try
Like i pressed STRG M to put it there like any other mod and it says no gamedata
what is the mod you tried to install
https://www.moddb.com/mods/stalker-anomaly/addons/classic-stalker-voice-taunts-and-idles-lines#commentform theres a folder called script lines and it just doesnt work
yeah that's because it's not set up properly for MO2
but every other folder works
because presumably it's old as shit
oh no the author just doesn't know how to pack it. ok
@tropic kite thank you. everything works now. you saved my butt. i've been at it for days
- CTRL-M, pick the file
- In the pop-up window, expand the folders, pick the ONE that you like
- Right click -> "Set as <anomaly> directory"
- Click OK
game looks absolutely beautiful
i dont get how you put the folder in there
if i press ctrl-m i can just keep opening the folders not put it in there
what do you mean by "put the folder there"?
no folders are involved here
if you're asking "how do you get the list" - click the little arrow on the side
how did u even get that window like am i just dumb
if i press CTLR-M i can place folders or stuff from my pc into the launcher
in MO2, go to File -> Install mod... . Then, select the mod file that you downloaded, which should be called Classic_Stalker_Voice_Taunts_and_Idles_Lines.zip
Don't ask me where the file is, you downloaded it and put it somewhere - find out where it is on your computer
do you mean the unzipped version?
i just did what the author said
ill try
so this with every thingy
i assume you only pick it for the ONE faction you are currently playing.
you happened to have picked a mod written by someone, who does not fully understand how to make mods work in Mo2 well
why does this make the scope dissapear?(modlist attached)
no idea but i can tell you your MAS/MASG/PUSSA mods are in the wrong order
in that i typed out the correct order, top to bottom
man i don't even fuckin use mas
ok
as from what i see modular is the mas right
ah nv
maybe i named it like that
dont remember
did you ever figure this out? im having the same issue
even with the right order it didnt fix the scope going off
welp I was loving the decorating but then this lmfao
!hfc is weird because the command doesn't register in the main menu
Open the game, in the main menu open the console and type hanging_lamp_ignore_match_configuration 1. Then load your save, remove all the TVs and lamps or light sources you placed. Save. Then type hanging_lamp_ignore_match_configuration 0.
kk, found some things i didnt make, firstly i only enabled main, not vanilla scopes and extra vanilla scopes, secondly didnt delete shader cache and lastly i did not disable weapon cover tilt. (now when i try to make a new game or join the same save, it writes me that i need to use weapon cover tilt of update 9 or later because some gunslinger thing is missing)(so how should i install tthis mod, ignoring the last requirement?)
I updated GAMMA to use Pizza's modular attachment system and now i can't load my save, is there a way to fix it? If not i'll start a new save. Ps: the version i was using did not had the realistic magazines, i used the mag redux.
ok i see
its not compatible but i cannot make even a new game without the weapon cover tilt
Cover tilt you disable on MCM inside the game menu. It has to be turned on on mod organizer
not sure about it
thanks for the help
because you didnt read the mas install instructions 
How does this answer my question? I know what it is, I'm playing this for more than a decade. I'm saying its not working even tho offline combat is set to full.
Everytime I enter a map, gunfights happen straight away, like they weren't simulated at all until I entered the map. Wondering if anyone with redone ever had the same experience
this is entirely normal though. gunfights happen because the map is loaded into your online range = npcs actually start fighting instead of the game going "duty squad 1 encounters mutant dog squad, roll dice, duty squad wins, delete the dogs"
i feel like you are describing a different phenomenon?
straight up this engine starts crawling when you get close to zaton, specifically because of the number of NPCs it has to simulate in hub areas. i do not think it is actually capable of fully playing out firefights in areas where the map isn't loaded.
How do I use the taskboard tab with the interactive PDA mod?
i believe you are meant to install the interactive pda with the taskboard patch
Where can find this patch? I downloaded the Itheon Taskboard and the interaction button is gone 
You should use the 3d version of interactive pda mod, it included a taskboard patch
I downloaded this, but when I click on the taskboard tab, it's like it doesn't open, it stays on the screen of the tab I was on before clicking
!modlist
@hard fog Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
so im not in standard resolution like fullhd or 2k so how can i fix this
I did this and it still doesn't work 
as far as i know, there is no 4:3 aspect ratio patch.
the little arrow to show where waypoints are on the minimap has stopped showing up and the waypoint marker showing up on screen with the distance of the objective doesnt show up either both of theses settings are enabled does anyone know how i would fix this
hey guys new to gamma and fairly new to modding. couple questions.
is the sss and atmospherics mods in the mod pack the newest ones? and do you replace them? also if you use the mod pack versions which is the best atmospherics version to use? confused why there are like 4 of them and only one is active on a fresh install
The ones enabled by default are the newest ones. The ones in Disabled are all outdated.
Generally speaking everything in that Disabled category is outdated, broken, breaks gamma or breaks the game. Or a combo of all
cool thats what i thought what about the smaller things like mags redux specifically?
everything in there is outdated etc.
And frankly a couple of disabled mods not in that section also break things (in more minor ways)
Ammo count is missing. Turned off UI Rework and It's the same thing. Anyone know how to fix it?
Worked fine before I reinstalled GAMMA and used the new downloads .zip, instead of the old one.
Did you enable Ammo Check?
Go to mod config menu and see if there's an Ammo Check tab.
Sure. Except that mod is not enabled by default. I can only imagine it was on in your custom preset, or you perhaps reinstalled the mags mod to include ammo check and forgot?
How do you change the bhs ui like that?
Yeah, GFY had custom settings and I forgot to delete it before loading my game.
Probably what did it.
You can find some in mod posting.
Thanks
why is the author of gamma killer seeking help in modded support

Anyone else still crashing whenever they use consumables from their inventory?
Seems there's few people who have the issue, but the consistent workaround is to add the consumable to quickslot. May or may not have to do with FWP or Mags enabled, or backpacks of the zone I suppose.
(mainly just asking if it's a known issue that might be fixed later, I don't mind the workaround for now)
Hey, quick questionβdoes Project Inverno support existing saves, or do I need to start a new game?
idk if this has happened before but is there any way to fix it? i honestly could not tell you how it happened, i loaded up the game and this is what they look like.
Does anyone know how to solve it?
!datatree
@mossy escarp
- In Mod Organizer, right click anywhere in Data Tree (right pane)
- Select
Save Tree to Text File(see image below) - Enter any file name and confirm save
- Upload the file where it was asked (drag and drop)
_ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _
"https://media.discordapp.net/attachments/1098945649929617478/1229932191107121223/save_file_tree.png?ex=66317a9d&is=661f059d&hm=e2eec9ae6b348dfb5f773a2b6228ce205d3b140c6538b34e92a766a0c8177d24&=&format=webp&quality=lossless&width=531&height=602
!modlist
@mossy escarp Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
Send both 
But i'm using only Egui
hey guys this came up when I'm equipping new masks? I have FDDA redone, animated campfire ignition installed. Any ideas?
hey is there any way i can use sss with dx9?
Accurate stat extended 
is this because of the 3dss update ? somewhere was said not to update , and I did it just before that massage came
!shader // you can try this if you already haven't
@native nimbus To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
always recommended to clean your shaders after you install/update anything related to them
"any ideas"
actually posting your modlist would be really helpful for those ideas
my GPU is dying , right ? II launched the game 30 min ago and it was fine except the black squares
!hideout_crash // one of the crashes after you've updated GAMMA
Open the game, in the main menu open the console and type hanging_lamp_ignore_match_configuration 1. Then load your save, remove all the TVs and lamps or light sources you placed. Save. Then type hanging_lamp_ignore_match_configuration 0.
i didnt update gamma?
are you asking me or telling me
or rather, the crash has something to do with (not) updating
#π’announcements message
yeah usually would be this
Im thinking about installing Texture packs on Gamma and was woundering if there are any to recommend that are compatible with current Gamma. Was thinking about ATO 3 and Vehicles Redux V1.3 2024
why is my morphine ampule only 180 seconds , modlist attached
any posted in #1035807043933720576 are compatible, usually no further steps needed beyond simple installation
ATO3 (I use this), Rotten Life, Shattered Skies etc.
also recommend grass + trees, your preference
Thank you, good to know. Any Grass and Tree you recommend specifly?
also lmao, when i killed an expert renegate(aka redone collection thing i think), the game aborted
I use C-Con because I like how it grows over roads and concrete and looks great with taller grass (I use .8 height), Panceride's works too if that's what you prefer (both have more flowers than the default Aydin's) https://www.moddb.com/mods/stalker-anomaly/addons/grass-and-trees-by-panceride-v10/
Just quickly checked Panceride and oh boy does it Looks great! Luckily own a good PC ( 4070ti super 16gbvram, 32 Ram and 7800x3d, running in 1440p) and would like to install ATO 3, Panceride and vehicles Redux, what would you think about Performance loss would be Like? Just more and less FPS Wise.
no idea as my system is weaker than that, but I didn't get much of a loss at all
and if you do, it's easy reinstall for lower resolution or just disabling those mods
Got ya. Thanks a Lot!
https://www.moddb.com/mods/stalker-anomaly/addons/artifacts-inspectionv10
does this not work in GAMMA, or did I mess up the install? it crashed me when I tried to inspect a perkifact, I don't have the crash on hand but can crash if it helps solve the issue
hey i have probleme
!shader // in the first screenshot you can at least kinda see what's wrong, in this second one I have no idea what I'm looking at
@proper jay To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
i see particule or when i move i see shadow of the decor weird
now that's a better description, I had the same issue
anything with this?
!sss // I think reinstalling or updating SSS fixed it for me
@solid phoenix
1.) Go to your
GAMMA\downloadsfolder and deleteScreenSpaceShaders_Updatex.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck/Disable these options:
- Check MD5
- Force git download
6.) Click install / update G.A.M.M.A.
sry is complicate to explain
#π¨modded-gamma-support message
this guy had the same crash, try to redownload + reinstall Placeable Campfires and see
had this error when trying to play gamma with modular attachment mods with dx9. the game launch just fine, but crashes when I try to create new game.
same thing for me. i installed modular attachments mod while im using dx9 and i get this error after i choose From last save
Hello! When I try to equip Dushman's Saiga gamma crashes. Yesterday everything was okay and I haven't changed anything since then, The only mod I added to the base from the start is woman model of a stalker. What could be wrong?
!saiga // I was informed this crash should be completely fixed in the current version of GAMMA
@fallow orbit
If you have a broken or weird-looking Saiga, or if the game crashes: Can't find motion file 'dynamics\weapons\wpn_saiga_hud_animation.omf' section 'wpn_saiga12s_m1_1p78gs_hud', then do this: #π¨base-gamma-support message
yeah I had relatively same crash before but this crash doesn't even has a log, game simply closes itself. There was no problem since last update. Gonna update the game again then, sry for disturbance
managed to fix the crashes on new game. But when I equiped any scopes in game, it crashes with this message
Not compatible with fdda rd
You can enable the mod when install fdda redone
I don't understand this sentence
do I put Inspect below FDDA Redone, do I reinstall FDDA Redone after I enable Inspect, is it a part of FDDA Redone, is there some setting in a FOMOD I have to select, does it not work at all if FDDA Redone is enabled
Do you have fdda rd installed
yes, loaded before Inspect
The normal moddb version of arti inspection is not compatible with fdda rd
To use it with fdda rd, you will need to tick the arti inspection option in the fdda rd installation and disable the original arti inspection
ah so it's an optional part of FDDA RD and I don't need the ModDB version at all?
Yep
very cool, thanks for the info, off to reinstall FDDA
Hey Kute, is it the same case with equipping masks? I suspect this is because of FDDA redone as I dont have any animation mods installed apart from animated campfire lighting.
Base gamma alr have headgear anim, but yea fdda rd also add headgear anim and the original moddb headgear donesnt work with it anymore
Right. What do I need to untick when reinstalling FDDA? thanks!
Why do you want to reinstall fdda
is this mod from base GAMMA supposed to be empty?
No, your gamma installation is corrupted
Wouldn't there be a option there to disable anims or is it the one in the mod config settings?
Do you mean fdda rd? You didable animations in the mod mcm
Ah. Okay, i'll try that. Thanks Kute!
My stats numbers wouldn't display without it
Enhanced gui doesnt support or made with number stat in mind so you will have to deal with it
fuck me, what was the command for steps how to update without losing load order? just back up my profiles + settings and update through launcher?
i guess i report it here so i got an error with my pda radio whenever i tried to switch playlist the game crashes and gives this before this i had installed custom music and also disabled no copyright songs
(Oh right i also got 518 mods i have stutter fix enabled and as mentioned no copyright music disabled)
!backup and !full
@solid phoenix
Follow this to "save" your settings and keybinds before updating: #βπfaq message
And if you want to keep your personal mod list between updates, follow this: #βπfaq message
Open the game, in the main menu open the console and type hanging_lamp_ignore_match_configuration 1. Then load your save, remove all the TVs and lamps or light sources you placed. Save. Then type hanging_lamp_ignore_match_configuration 0.
Meh, ty for explanation
The crash only happend once anyway
crashed every time i enter Cordon. i have 520 Mods Enabled (Meatchunk's prefetcher and turn this on if you stutter) my launcher is 6.7.0.0 and i see no flag mods (sorry for broken english)
thank you!
Sorry to bother you again. Im about to install Pancerides Grass and Tress. Is there Aydens or some other Grass that i have to turn off before? And do i install it in the Visuals Folder in the MO2?
what I find the tidiest is to create own separators for anything you add on top of base GAMMA (preferably in a separate MO2 profile also), never add mods in between the existing GAMMA load order unless the instructions specifically say so
and honestly I haven't installed Panceride's yet so no idea
but prob no need to disable anything because it should simply overwrite
Omg someone doing it smart
Bethesda modding teaches you to clean up your mod manager shit right quick, and keep it that way
this icon is not a good sign btw, your modlist shouldnt have one
!shader
@hearty crag To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
#π€bot-commands
yeah everything i know about MO2 comes from a shitload of skyrim modding
my dream is that one day grok will use the MO2 Notes feature
instead of typing the reason why you should/shouldn't use a mod in the title
in fairness this only matters if you want to use the mods that have no data
I fully updated GAMMA twice, no idea what else to do
and yea only some of the mods in optional have no data
I enabled turn this on if you stutter / unlimited stash weight / bodies on the minimap / npcs cannot see through foliage and where is the crash log
the game just crashes whenever I try to load a save and its a chance when it comes to crashing
could manually install them yourself (just give it the same name when you install to ensure an overwrite), but like i say, it really only matters if you want to use that mod
hold on, my MCM for SSS is gone after reinstall
and I was wondering why my game looks a bit too dark and glossy even after clearing shader cache
at this point i'd encourage you to do a very manual reinstall (as in, this: #π¨modded-gamma-support message )
i have a sneaking suspicion that this is caused because SSS is undergoing rapid patching, which continually changes the folder structure, which can cause issues with install
thank you, on it
so this doesn't actually say it crashed - this says the game force closed
Yeah that definitely what people should do. Itβs also easier to update to a new gamma load order when doing this
k lemme try to get the game to crash again
which means i would rather suspect third party programs - antivirus, anything that uses your GPU like wallpaper engine or msi afterburner or similar
it prolly picked up the last log where I force closed it to send the crash report
but again if it doesn't crash out in the same way, every time that you do the same actions in game, it becomes extremely hard to pin down causes for crashing
the log always overwrites as soon as you launch Anomaly
i think i made that suggestion before, the reply was "when it's in 1.0" (same for all MO2 reorganization suggestions)
yea lemme get it the crash again it aint allat hard anyways lmao
guys what is this red message thing that just pop up in my pda?
failsafe to stop you from accepting broken tasks.
i see thanks i thought it some kind of hidden mission
is there a way to use gamma without sss?
or atmospherics
without it being too weird
like too dark
or horizon looking really white
yeah, you have to disable SSS, Atmospherics, Enhanced Shaders, and Beef's NVG (they need to be all on or all off). Afterwards, delete the Anomaly/appdata/shader_cache folder. And now you don't have the shader mods any more
so if i disable atmospherics but not sss it will still look weird
the other way around?
it'll look weird
and lead to the gfx issues you just mentioned
ok i'll use it all disabled
otherwise i get 20fps or something
literally unplayable
yeah you can disable all four + clear shader cache (that part is important)
for significantly better fps
yeah i figured that out thanks
thanks a lot
maybe in the future i will have a way of playing with sss
i start the game through the mod loader it starts at a black screen and then crashes i have no clue what is causing it the only unabled gamma mods i have on as im aware is the magazine mod and the necessary mod for it to run
#π¨modded-gamma-support message reinstall SSS 23
how do i do that
click the link in my message. should take you to a comment that goes click by click.
(if it doesn't, scroll up a bit.)
thank you sorry im dumb lol
anyone else experience a quick fps drop/stutter of about 10-15fps whenever you open the pda? I'm on latest gamma version and this happens no matter the fps cap.... just wondering if there's a solution because I've always had this issue with gamma and vanilla...
I see now that nobody has working command hand gestures from Maki's Gesture System, but at least we can express our disappointment with a firmly outstretched middle finger.
So far, this is the only casualty I've had as I'm adapting mods from my personal list, so I guess it could be worse.
Why does this sometimes appear and then disappear?
Does anyone know what mod is this from?
Why does my sky keep changing every time I move the camera angle? Is this a shader issue? Anyone know how to fix it?
!modlist // how about you share your modlist with us, then we can make better guesses
@thorny solar Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
i tried to install Modular Attachments on a dx9 version. and when i want to enter the game by selecting Last Save, the game crashes and i get this error. Can someone tell me how to fix this?
"Dynahud" sounds like dynamic HUD = "sometimes it appears then disappears"
just my guess
I don't use EXP Edition so no clue, you ought to know what those mods do
yeah it's dynahud.
the entire point of dynahud is that it selectively hides HUD elements.
always read the mod descriptions
(or fomod tooltips etc.)
is there any way to change the svarog detector to how it was in 0.9.1? i can barely see the anomiles marked on the screen
you got three options
- MCM -> SSS Settings -> Postprocessing -> reduce bloom
- https://discord.com/channels/912320241713958912/1338543927803908176
- https://discord.com/channels/912320241713958912/1361662107527024710
finally got the game to crash
idek why it took this long it was crashing every 5 mins before this π
ngl if it isn't crashing out in the same way, doing the same actions, there is VERY little we can do.
especially if the log stack trace is empty, as yours is
nah this was the same sort of crash
all i got is "save often"
ahhh
yo my game keep crashing during brain scorcher and i dont get any sort of error messages
the crash only happens when I first load into a zone
the same applies while loading a save
since its technically loading a zone
about the ONLY thing i can maybe recommend - in main menu, open console with ~, enter the command spawn_antifreeze 0
this disables an experimental performance boosting engine feature
wrong file, need the text document log
alr
Ima try disabling the turn this on if you stutter mod as well
on top of this
how do you find that again
you caaaaan but i doubt it's causing it
same folder where you found that mdmp file
might as well try
gettting this every time use any item which i believe is animated in the 40- Food Drugs and Drinks Animations FDDA - Feel_Fried mod. reinstalled the mod, but im still getting this error
the other mods that I activated shouldnt be able to cause a crash
are you using any kind of translation mod?
or so you'd think
im using zlm, redone north & south, and the walking ded
yeah not a super helpful log. what's your modlist
oh LMAO
yeah i don't touch redone stuff sorry
ah rip
i treasure my ignorance. the most i'll do for you is tell you to double check the install guide
in terms of language not. i just use the KVMA models and disabled reliable FDDA animations. activating it didnt fix it tho
re: collection changes too much
ok another crash lmao
different and also nonspecific error
which i guess at least tells you "something is wrong with a texture somewhere"
not that this helps. because it means it could be literally any texture.
bruuuh so it could be just a faulty installation
yep.
Ima also try launching it with dx10 instead of 11
dx10 is always broken
then will reduce it since I remember doing something back then to fix it
say less
how to properly turn on Magazine redux mode ?
the second one not the anomaly magazines
cuz this happened before
!mags
@crimson spear
How to enable magazines in GAMMA: #βπfaq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
I lowkey forgot what I did to fix it tho
click the link to the FAQ channel please.
thank you
!dx // yeah - it's drop to dx9 (hopefully none of your custom mods break on dx9), play for a bit, hop back up and pray the error goes away
@sudden maple
If you want to play DX8 or DX9, Follow this guide: #π¨base-gamma-support message
dont really have any custom mods I just enabled some of the optional mods so it shouldnt break
hopefully this fixes it π
oh some of the optional mods also don't work on dx9 hence the profile
tends to be anything that adds textures
did you get and use the DX9 profile
you were posting a lil fast for it ngl
ahhh I have to switch profiles 1 sec then
what about HD icons can I just enable them simply by redownloading the mod and using them?
@tropic kite
i don't use the mod so idfk
do what the mod description says.
kk
maids is old as shit though
yea I couldnt find any guide on how to switch to dx8 dx9 profile only some random mentions on this dc
click the fuckin dropdown please.
instructions for Maids HD are in #βπfaq
*Extract it into your ANOMALY folder, replacing the files when asked. You will need to do this step every time you use the GAMMA Launcher in any capacity. * what does this mean exactly do I have to do it every time I update gamma or every time I launch the game?
ty
GAMMA launcher = what you use to update/install GAMMA
MO2 = what you use to manage mods and launch the game
I used the gamma launcher to launch mo2 as well so it got me a bit confused
so its each time I update gamma I assume
. . . what are you reading this from
from the guide you sent
this one
ah, that. yeah you have to downpatch the modded exes. that's what it's telling you to do.
it means "every time you click "Install / Update GAMMA" in the GAMMA Launcher".
kk it was worded weirdly so it got me confused ty
well its working at least
k time to see if this fixed it
yea it didnt immediately crashed when I spawned in
It might be fixed but I will just test it out a bit to see how long it will last before it crashes
btw what is the big difference between dx9 and dx11 other than the graphics downgrade
ok nvm I see the difference now
the texture quality took a big hit
was assuming it wasnt too much of a difference but nah
thanks man without this I wouldnt get it to work properly the guide took me 8 min to do holy
Yo so quick question, is DNPCAV compatible with useful idiots? Cause I cant get my loner and/or clear sky companions to wear an ecologist scientific armour
https://github.com/bellyillish/useful-idiots?tab=readme-ov-file#known-conflicts it's not in here so official answer is "shrug try it out"
I'm having an issue with frosty weapon pack. The rest of the mod seems fine, but this part shows "no valid game data". I've disabled all G36 weapon packs that I can find when searching ti up, but that doesn't change it and I get the same error
Thats fair, its not showing any conflicts but when tried it doesn't seem to work, kinda sucks but oh well
!fwp // for FWP aren't you supposed to manually copy each mod's folder over, and not install it through MO2 like a "normal" mod
@grand dew
UGP is no longer available in Gamma as it has been superseded by FWP from the same creator.
UGP(FWP) Discord invite link: Accept
Latest FWP thread in this server: #1277740537344168016 message
Frosty Weapon Pack install video:
_ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _
https://www.youtube.com/watch?v=0mAgUuvs1FY
Frosty Weapon Pack : Adds Escape From Tarkov Weapons! Adds 75 fresh and reanimated guns to give a new flare to your gunplay!
FWP IS :
12.2 GB UNPACKED
1.9 GB PACKED
DOWNLOAD LINKS
UPDATED 6/17/2025
FROSTY WEAPON PACK (GOOGLE DRIVE LINK) : https://drive.google.com/file/d/1mV7qLX1rUZQhOVtNQPzT9fY5Kgfkx86o/view?usp=sharing
FROSTY WEAPON PAC...
!mags // double check the FAQ link
@crimson spear
How to enable magazines in GAMMA: #βπfaq message
Do NOT enable 207- Mags Redux or Mags Buyable at Traders!
I tried it 3 times but each time it was hanging to the point it would take days, I looked around and people recommended 7zipping it to the mod folder instead
i did as was told in magsssss
worked fine on my machine, unzip the whole pack, copy folders you need into GAMMA/mods, done
ok, then screenshot your Realistic Magazines separator for me, like this
so just drag and drop these 4 mods?
https://discord.com/channels/912320241713958912/1277740537344168016
follow the video guide like I did




