#π¨modded-gamma-support
1 messages Β· Page 187 of 1
I mean you should have the archives downloaded already, but somehow it didn't work the first time
you can try I guess
Dawg I have been trying to fix my game for 24 hours just because I wanted 3dss
I am so close now
If anyone ever needed help with 3dss I am the guy to ask
I forgot what the anomaly is called, but whenever it appears, light looks like this.
Can someone help fix this, please? Is it supposed to be like this?
i dont know if anyone responded to you, but i had the same issue, couldnt find a solution to using that entrance but if you go back to the entrance with a fast travel, and then follow the road to left and prone under the gate, and travel to CNPP north, you can enter through the door in the north section and complete it that way, i hope this helps
can someone send the instructions for installing the KVMAS Azetrix Merge Models mod? cant find it anywhere
So i thought I had followed the steps for the KVMAS install but I did something wrong somewhere and have no idea what, I would have posted it in that post but discord is refusing to Allow me to send messages there.
Check the #1035807043933720576 area
Incorrect install. redo following the guide
ok could you tell me what i did wrong then because just saying it doesn't tell me. Where in the guide did i mess up at?
what do i search for i dont see anything at all
at the disabling mods step
you open the pins and read the guide?
I did do that
oh shit alr mb
Is gamma medications balance disabled?
Just did that it didn't save me hitting the disable
I do have a question what does that do removing that does that remove how the meds work for each limbs and etc or no?
removes some meds changes gamma does
new errorr
well this one idk about
Hey fellas, is there a way i enable the body health system UI showing up next to inventory? I remember that's how the mod is by default but in GAMMA it is removed
channels i bit confusing idk where i should ask this lmao
is there any way how to fix this? it happens when i try to update
Never was in gamma
Are you on the launcher 6.4?
yup
Can you show your version number on the gamma launcher?
anyone know what this error means?
I think this might have happened after I downloaded and deleted DEVICES OF ANOMALY REDONE (UPDATE 4.1)
An actor in your save is trying to pull out a detector from DAR, but since you deleted it, it can't find the necessary files
Hmmm it could be the ongoing issues with ModDB that are causing this.
yes you cant remove it
@olive berry any idea on this one ?
! [SCRIPT ERROR]: ...ker anomaly\gamedata\scripts\perk_based_artefacts.script:2795: attempt to index local 'obj' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...ker anomaly\gamedata\scripts\perk_based_artefacts.script(2795) :
LUA error: ...ker anomaly\gamedata\scripts\perk_based_artefacts.script:2795: attempt to index local 'obj' (a nil value)
I got that crash yesterday and well it keeps coming back after a while this time when I completed a quest and got an artifact as reward
!modlist
@deep mason Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
jsut to be sure
hm ?
is there any way I can get around it because DAR has been possessing my stalker
and making my stalker unequip his weapon or pull out his pda and play the radio for no reason
Only by copying gamedata/meshes folder from that mod into an empty one and load it
there is no reason not to use DAR though
its the de-facto default mod now
I swear to god this mod has been possessing my character
and whatever you have is cause by some other mod being incompatible
Whenever this mod is active
my character randomly plays cheeki breeki music in the radio
and starts shaking
I have died like a million times to this
lmfao
you have an artefact that does that
i forgot what it is called
DAR has nothing to do with it
oh bruh u right
I had the scar artifact on lmao
I had it on for the strong psy res

Still looking for anyone who knows how to fix this going to work so will have to check back later
At least post your log, this message could be anything
an error happens when i press to start a new game
Multiple consecutive crashes. Can any helper/modder assist?
So I got this error twice when I clicked the PDA of a dead npc. Anyone know why this happened?
Jeez that's a tough one... Bunch of trace backs to something about tasks? Were you moving in a transition when it crashed?
alright i deleted this previously, 'cause i thought i fixed it, guess not. anyone got a clue to help?
Could a number of things, it's your log that is important
Nope. I just killed a CS guy, walked down to scientists bunker and got crashed right as I was about to open the door
Holy fuck that modlist
Maybe there is something that isn't logged that caused it?
good luck
!1087
@scenic dome, we don't exactly know the reason for this error, but it is a random and regular one, please keep calm and carry on with your game.
Maybe in the future we'll find why it happens, but it's harmless otherwise.
I mean the last thing to see in your log is some shader compiling, so could be a number of mods, but even then it would usually throw up something like an invalid truncation or whatever. What's your error message if there's even one?
this is relevant to default gamma loadscreen crash only no?
and it has already been fixed
Its for every 1087 crash
Unless its constant. Which it usually isnt
That is the one you know the cause of
there are plenty of 1087 crashes that just happen randomly without known cause
Its modded support after all
Maybe
testers haven't had 1087 since ages
they do, sort of
the last sentence in the tag makes no sense regardless
There isn't one. If there'd be one I'd send it alongside the log, but the game just shuts down and the windows error sound plays alongside it
i might have figured it out this time, just a bad mod/mod with FOMOD i forgot to tick
does anyone know how to fix it?
That's gonna be a hard one to fix. Anything you added recently?
Yeah. Hold on a sec
https://discord.com/channels/912320241713958912/1278836517858447471 This and removed this https://www.moddb.com/mods/stalker-anomaly/addons/152-hg-companion
Basically swapped companion management mods
Hold on. I may have a clue
Might take some time to verify it though
And also this
But I didn't think the companion teleport mod was responsible due to it only working when the keybind is used
So these are all of the clues that I've got
i also got the mod recently, not causing any conflicts/issues for me
Hard to say if it's remnants of companion logic from your previous mod
Could it even be?
Like I've been using this mod for a week ingame now. I wouldn't think of that
I mean, even with the mod disabled, the companion options you set for them are saved in your save file, so there's probably behavior tweaks left in there that now doesn't have the script files necessary to modify it anymore or remove it
So you think reenabling the old mod, setting the companions to default (Base game) settings and then disabling could fix the issue?
Worth a shot if you can revert companions to default behaviors
I wish I could, considering one is OFF THE DAMN MAP XD
Like he's supposedly loaded in, the icon is on the map and the mod detects him, but he's not physically there
Ah the classic didn't follow on fast travel/ teleport?
if you're desperate try installing pdb
Pretty much. Bro got stuck in the underground in Outskirts between the convenience store and once teleported back just dissapeared, even if the icon was there and HUD indicated that he was there too, but he wasn't
I went through a few transitions and noticed he spawned according to the HUD, but not physically, and teleporting companions caused crashes ever since
I just thought "Oh no... Not again "Too many stalkers to load at once" bug.". Lowered the ZCP numbers and waited for a few ingame hours on one map in hopes of him spawning, but that just worsened the issue with the crashes beginning to happen whenever I believed the guy was about to spawn in physically
Like as if he was the sole reason of the damn crashes
At this point I'd rather grind for another military Nosorog and PKM, and train a new guy, and just write off the previous one as "Lost to the zone", but he keeps on staying in the game
Fucking ghosts hunting my save once again XD
The only way I've ever fixed companions going gray on maps and disappearing is reloading a previous save. Otherwise kill them via console if you can find their id
I should start writing their IDs down then lol
But I'll see if I have a save not too far back before the guy despawned. Hopefully I won't have to backtrack too much
Help my game crashes when I dissassemble an item, my logs are kinda empty
Had to load yesterdays (IRL yesterday) sleep save since my 10 quicksaves were all made after the doomed guy going AWOL qwp
But hey. I got my guy back
having errors trying to install the mods for gamma could i get some help
okay now my lights are cooked, anyone got a clue here?
!shader
@scenic dome To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
i already did this, no dice
Start removing mods/changes one by one and clearing shader cache each time
alright
Could you tell me how to locate that I haven't done modding or talked gamma in almost a year here.
! log
@rough aurora, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash _ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ https://cdn.discordapp.com/attachments/1098945649929617478/1206834462411722782/log.png
Thx will post my logs after work once I am home.
tried it, nothing happened, still the same
I still have this problem. Anyone knows how to fix it?
i have the same problem
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 1214
[error]Description : fatal error
[error]Arguments : Can't open section 'aim_hud_offset_pos'. Please attach [*.ini_log] file to your bug report
stack trace:
plz help
my game crashed after getting into a new area and aiming down sights with one of the snipers from the frosty weapon pack mod
my game crash without an error when i tab in and out or change settings any ideas ?
is this where i ask if i have problems that arent made of errors? such as lag when opening containers, but way sooner than most people
cannot even finish mortal sin despite playing without collecting anything
not unless i like to freeze for several second on every opened inventory
got this having all the 3dss mods enabled, what do i do i have them in the right order
games not crashing but I'm just got a question how to add a mod to gamma, want to add the mag reduc, but don't know how.
Do you have a lot of stuff in your inventory or the box?
!shader
@cursive olive To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
doesnt fix it thats what ive been doing
welp you did something, so its up to you to undo
Hey could someone please help me?
No magic here
what did you do to get this error?
i've reinstalled it like 3 times its your stuff that aint working
..my stuff? what
is it not ur mod dawg?
welp
well launched up Gamma after not playing for like 2 months maybe and I just enabled 2 mods headgear anims and groks masks and reflections
!shader - do this
@sand marsh To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
though you could have just incorrectly installed modded exes update
if you did that ofc
oh and I also updated modded exes
and there we go
sorry forgot to mention that my bad
but I pasted the folders into anomaly directory
like in the description
and didnt delete the required files
you skipped a bunch of versions
you need to delete the old files completely
no, unless 70kg of ammo, armor, etc. including the one i have equipped counts as "a lot"
and the boxes are dead bodies
If you have UI mods they can lag the inventory screen
having favorites does too
inventory sorters lag it as well
hey fellas, when using the eotech sight that has a bunch of numbers, there is no reticle. when I aim upwards and downwards quickly, I can bareley see a green standard eotech and when i move downwards a USMC ACOG style reticle. anyone got a fix?
Do this - save the game and load it again. Check if the lag is gone
!reddot
@real marten Fix missing/misaligned red dot:
- Increase texture detail to 3/4 or 4/4, or enter
texture_lod 0in the in-game console, and then restart the game.
If the steps from above didn't work, try this fix instead:
- Download the mod from #π¨base-gamma-support message
- In Mod Organizer 2, click on File -> Install mod
- Find wherever you saved the Jubs_Low_Texture_Red_Dots.rar file.
- Click βOKβ. Name it however you want. It will be at the very end of the mod list.
- Enable this mod.
if you add up all the quest stashes i havent emptied properly you might get a couple item too idk
no ui mods that arent base gamma, i do have the sorting reconfigured and do have mags which is set to resort when loading them but i have lag when opening, not when using inventories
i also have favorited the ammo and mags for the two weapons i use
All that happens when you open the inventory
should the imput look like this? texture_lod 4
nope, doesnt help
welp then idk
so basically the answer would be to disable the sorting mod? or set it back to default?
the stuff next to it
how do you make zoomed in screenshots like this
mb
or do you just have discord text size 15
Win key+shift+s
huh
im getting some weird sound stuttering at the lab in yanov. anyone know how to fix? anytime i fire my pistol with the silencer it sounds like aids
anyone know of a way currently to reinstall FDDA without this error popping up? I do enjoy my backpack animations, haven't got busyhands from it yet.
I figure disabling some mod may work I just don't know which one
Ok, I figured it out. Reinstalling FDDA from the MODDB website worked, reinstalling FDDA from the MO caused this issue. Cheers.
!fdda
@inner grail Follow this instruction β‘οΈ #1289293557319860284 message
just use the correct way
can someone help?
If it ain't broke, I dont try to fix it. My method works fine for me.
Disabling GAMMA reliable animation settings is the only step I took
Its not good at all
my sks scope is all goofy and bad
its the bad PU scope i thought it was supposed to be the mosin one
Hi i have a strange problem. My magazines change type. For example from 60 to 30 capacity. It's like the Zone stole my better magazine and gave me shit. I'm using mags redux. (Unjam off)
wasn't able to take a screen shot, but the error was line 512 mem overload 400k @thorn forge
bc if i try, then rip goes my screen
and would need to restart the pc
how the hell is 18129Kb being used?
Are you using a texture pack mod or some fancy gun mod?
no, just ur mod set up
FATAL ERROR
[error]Expression : ParentID != BI_NONE
[error]Function : CKinematics::BoneChain_Calculate
[error]File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRender\SkeletonRigid.cpp
[error]Line : 214
[error]Description : assertion failed
what can i do in this case?
7.0 gigs being used in total
15.6 gb available
anomaly dx 11 is 17.0 MB (17,915,392 bytes)
hmmm
@thorn forge
There's a bunch of russian people with the same issues it seems if you look via the discord search. I don't speak russian but you could try your hand at google translate or whatever to see if someone found a solution there
main issue is that discord takes quite a bit of ram
I mean I'm running discord and it shouldn't be an issue. Pretty much everyone runs it in the background
how do you run it in the background, exit out of discord?
Anyone doing warfare playthrough or is familiar with it? how does it work and how do i start capturing things and outposts
No, I just leave it running as is on my other screen
cant do that as i need to find a way to reduce ram usage in discord, gamma, or quit the application when i play
That's not the issue. It seems that the recent release of 3DSS introduced some form of memory leak on some configurations, so it's just a random error and nothing to be done for the moment. You could try updating your moded exes depending on which version you hve
its the latest. anom 153, latest ver of gamma, latest ver of 3dss
No I mean the exes you updated and got the Demonized github
Those that you installed for 3DSS
hm, i havent put the exe in i think
Didn't you follow the install instructions for the dependencies of 3DSS?
yes lol
i prob forgot
or it is in there
You should have gotten an archive from the Demonized modded Exes link in there.
You needed to unpack that archive in your Anomaly folder
Oh well you need to update your exes
Open the archive and extract and replace the content in your Anomaly folder
yeah prob why its leaking
It should contain a bin and db folder which you need to drag in the root your Anomaly folder
simple drag and drop, then i need to check "do this for all current items" and press yes, right?
Yes
replace the files
and bam
updated
imma keep discord up and check if i get the ereor
i'll use my phone to take a pic of the crash
if it happens
Just drop your log if it happens again, the message is written there
56% mem used oof, including task force and other background task. anom obv taking 6-8 gigs
Anyway i can check if the mods i added to mo2 are actually working and enabled?
Here is my log from earlier request
* [x-ray]: Full Memory Stats
* [win32]: free[137421892464 K], reserved[6667312 K], committed[10393632 K]
* [ D3D ]: textures[2121797 K]
* [x-ray]: process heap[1690161 K]
* [x-ray]: economy: strings[236324 K], smem[277869 K]``` You should still have plenty of memory tho, look at that "Free"
Maybe try to install a texture pack that is reduced like ATO 1k or something
what woukd it do?
It's a version of Anomaly's texture that is reduced in size vs the basic anomaly textures. Hence less memory used
Load it at the very bottom
maybe 2k would be better?
I mean you're struggling as is with 2k
true until i get more ram
Try the 1k and then if you don't crash maybe upgrade to 2k
i should change the DAR texture as well
i got ato3 1k and 2k

Just a conjecture, a lot of people, by searching through the messages seem to have gotten this memory thing when using 3DSS, but that might be because of all the image manipulation for the zooming
from 6 to 4gb nice
I wouldn't even know how to diagnose that
How do i toggle my scope? Ihave a gun with two scopes and i put the keybind to a key, and it wont work
oh back to 6mg
Me neither, but maybe the rendering guy you're working with would know? It'd be an interesting metric to check how much of a memory increase happens when using 3DSS
I haven't had much of a chance to play but I've left it running in debug a few times overnight and haven't noticed anything
How to i install mags redux if i have mods like EFP guns, juan's guns, rwap and tcwp and other weapons, i looked in EFP server and didn't find anything plz help.
Me too, so it might just be something across different configurations, hard to say
I can't help you anymore than this. Could be worth a shot to just try and run default Gamma, see if the issue persists
can someone help my game keeps crashing after aiming down sights with a scope above 4x zoom in a new area
try updating exes, if doesn't help try updating 3dss
how do i update exes
download this and copy contents to anomaly folder
and replace
@thorn forge Mind helping me if you can I been waiting all day for an answer while working.
Best guest is you have some corrupted archives for your mods or are missing some things. You game fails to load the ledge grabbing scripts and then crashes after injecting some loadouts.
No idea how I done the update for base gamma then only attempted to add KVMAS so very confused on how that happened. Any idea what I should do now?
Oh if you added KVMAS then that's probably it, it's has issues
I did follow the steps right pretty sure but the problem is I can;t even type in the mod posting channel and I have no idea why either. I get that discord message telling me to bascialy be friends with them first before it would allow my messages to be allowed to process so its hard for me to just post my problems there
The thread might be at it's limits or it might have further restrictions. Have you tried searching in there if others had similar issues?
Sorry but thats way to much, I rather have someone live help me then in hopes to find someone with the same problem from the thousands of texts lol.
You do know you can use the search feature in a thread right?
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 1214
[error]Description : fatal error
[error]Arguments : Can't open section 'aim_hud_offset_pos'. Please attach [*.ini_log] file to your bug report
stack trace:
Guys help, how do i fix that
Even then I would have to have key words to locate which idk how that work I can't understand some stuff like others so having someone to talk to who knows and understands more is way more beneficial then someone hoping to run into the right spot which could take hours to days for me.
Suit yourself, best of luck in your fixing
So, I could have sworn I had named map transfer autosaves in old saves, prior to activating the Soulslike Mod on my save, with names that were like "Username - Map Name A to Map Name B". Fast Travel would also be named in a similar way, but with the name of where you arrived at only. Am I mistaken?
After losing five hours of progress due to Soulslike and dying, breaking the MS Blowout Quest, yeah... I'm grabbing "Ultimate Autosave v2.0"
my game will not load any save, or create a new save. It always gets to the loading screen and then instantly crashes. I have not played in awhile and just updated to launcher 6.2, it was not doing this before. any ideas?
I also just made sure I'm running the latest version of Mod Organizer and that didn't do anything to help
Well the launcher latest is 6.4
where can i find the 6.4 download?
Lemme guess, pins
Honestly, my best guess is where you get the files to install the modpack in the first place
i know that announcements is where the new launcher links have been posted, I just dont see 6.4.. I'll keep looking
I just found it, I must've just kept looking over it. Thank you for the help though lol
So, I just updated the launcher and confirmed it's 6.4, but the game is still crashing.
"The instruction at 0x000000000000000 referenced memory at 0x000000000000000. The memory could not be written" is the error code I keep getting
anyone using quick action wheel in gamma? how do i got about doing this without destroying the game lol? thanks
Bro got ignored.
FATAL ERROR
[error]Expression : ParentID != BI_NONE
[error]Function : CKinematics::BoneChain_Calculate
[error]File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRender\SkeletonRigid.cpp
[error]Line : 214
[error]Description : assertion failed
Does this error fit here? Game crashes when I enter Meadow.
Have'nt played Gamma for a few months. I come back, launch the game and instantly notice my frames aren't reaching above 30 fps. No my computer isn't shit.
It can't even keep a constant 30 fps. Only thing outside of gamma I have installed is Arrival and Adega.
I installed even more hideout furniture but that shouldn't matter.
Ah fuck, i fucked up my gamma..
Use the Arrival thread, all the steps are there
no it's not arrival it's Atmos
I am, just install it and configure it to your liking. Like any other mod
What about it?
Atmospheric is part of base Gamma
And it's been in there since 2022 too
I dont have it on my gamma modpack :o
Anyway its causing me lot of trouble to not have updated since so i will reinstall dw
Installing atmospheric is pretty straightforward. Just follow the installation instruction in the thread. Make sure you get the proper dependencies
Make sure if you're reinstalling Gamma to grab the 6.4 launcher. You can't use the old launchers anymore
The mod organiser one ?
what you mean 6.4 launcher
The Gamma launcher
Holy shit i've forgot how TEDIOUS gamma is to download
Is there like a list of what mods in the MO2 mod list I can touch and ones that I can't or should I just leave them all off?
^ The mods that come with the pack disabled
!403
@finite tiger
Stuck at around 396-400 mods downloaded? Try the steps below:
- Download the file from one of the archives below:
- https://www.mediafire.com/folder/eygi9nh3k4i0g/STALKER_GAMMA_Downloads
- https://mega.nz/file/9Zw2BbBI#5bYKylLqb4Dbv-tV0sDUrtoyWsNETe1jK1zu6I7GT3M
- https://gofile.io/d/sht7Bs
- https://drive.google.com/file/d/1cHd1AVMZlwGZJr6FFpBk_5PgjMiMmz8L/view?usp=drivesdk
- https://drive.google.com/file/d/1PVSoYfEyZENV_clLgmKVleLPSwNnC_0A/view?usp=sharing
- Go to your
GAMMAfolder and delete thedownloadsfolder - Using 7Zip, extract
downloads10-30.7zinto theGAMMAfolder
The RIGHT way of extracting the archive : Right click on the archive -> 7zip -> Extract files -> Choose your
[Gamma directory], REMOVE the check mark on this step, this is mandatory. At the end you should getdownloadsfolder (NOTdownloads10-30)
- Run
GAMMA Launcheras Admin, disable the checkboxes:
Check MD5Force git download
- Click
Install/Update GAMMA
!shader
@cursive olive To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
got this whilst making a new game, got it whilst using universal animations mod last in the loader, can anyone help?
Anybody know how to disable ads blur? Also happens when using meds/consumables.
When attempting to transition to Jupiter, my loading screen 99% of the time becomes frozen/stuck, the other 1% will crash to desktop without a CTD error. I've noticed that when I remove squads or common squads, the transition will then work.
Ill provide my log!
Hopefully this provides insight! Thank you,
How can I get rid of those texture errors? they look pitch black regardless of the range, like it's nothing there
got this whilst making a new game, got it whilst using universal animations mod last in the loader, can anyone help?
the light kinda blinks with brightness, is this intentional?
Anyone know what the issue here is? I'm trying to install 3D Scopes, followed all steps on the github, and after starting a new game or loading I get CTD.
im getting the exact same error
idk why
im using the using the universal animations mod at the bottom as well and nothing's fixed it
Based on what I'm reading its either an animation error or maybe something about weapon jamming(?). Idk
Delete the animation scripts in any mods you downloaded
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 1214
[error]Description : fatal error
[error]Arguments : Can't open section 'aim_hud_offset_pos'. Please attach [*.ini_log] file to your bug report
stack trace:
crashes when load into a game
just reloaded and almost puked. anybody know what this mod is called? reload blur, ads blur, consumables blur
what? how
I'm still getting the error "The instruction at 0x000000000000000 referenced memory at 0x000000000000000. The memory could not be written" when I try and load a save or start a new one, It's been stuck like this for 2 days now and I've tried everything I know of, could anyone help?
still getting error message
is there a mod that lets me use my ak or the half shotguns while using my detectors
Are there any mods that nerf/npc armor or boost ammo pen? Last time I played rookies without helmets could tank 1 9mmAP shot to the back of the head and some non-exo npcs could tank 1 7,62x54 AP round to the head. Headshots with AP should be instakills as a rule unless it's an exo-helmet
Watch why is my game like this and millions of other S.T.A.L.K.E.R. Anomaly videos on Medal, the largest Game Clip Platform.
anyone know why my screen has a changing light and dark texture on it and how to fix it?
can i switch to anomoly 1.5.3 without having to download gamma all over again
plus
Those are dissabled (for 3DSS)
137 - Auto-Zoomed Out Scope Draw - Demonized
342 - Desert Eagle Gunslinger Port - Dizmok & Pieuvre
Delete the animation scripts from any gun mods
how
dissable all this?
.
Go into the scripts folder of gun mods you added
can someone help
delete everything in scripts??
The guns
Yup
Yeah
k
can someone help
Are you using the version of 3dss from the git hub?
yes
Did you update the exes?
what exes
Check the guide for the exe link
Demonized modded EXEs??
Yes
dosen't gamma already have these?
Not the Ones necessary. It's part of the install guide for a reason...
i tried again and still same erro
only get this know
do i delete the animation in scripts??
yes
FUCK YHEA it works
but one question
how do i eneble thermal now?
found this and that why i am asking
someone told me when i had 3DSS this has thermal
nope not sure
----loading c:/anomaly\gamedata\configs\system.ltx
[DLTX] [c:/anomaly\gamedata\configs\system.ltx] Encountered !![wpn_ak74u_tac_pso2], mark section to delete
[DLTX] [c:/anomaly\gamedata\configs\system.ltx] Encountered !![scope_sks_b], mark section to delete
[DLTX] [c:/anomaly\gamedata\configs\system.ltx] Encountered !![scope_svt40], mark section to delete
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::Load::<lambda_d4ec0196723001379622487d80ce192a>::()::<lambda_858e5be0595eb7976a47536ebeb1adc9>::operator ()
[error]File : F:\ANOMALY BUILDS\xray-1.5.2 - SSS 21 - UPDATE 2024.08.10\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 371
[error]Description : fatal error
[error]Arguments : Duplicate section 'markswitch_colors' wasn't marked as an override.
Override section by prefixing it with '!' (![markswitch_colors]) or give it a unique name.
Check this file and its DLTX mods:
"c:/anomaly\gamedata\configs\system.ltx",
file with section "mod_system_3ds_colors.ltx",
file with duplicate "mod_system_markswitch_colors.ltx"
stack trace:
stack trace:
SymInit: Symbol-SearchPath: '.;C:\Anomaly;C:\Anomaly\bin;C:\windows;C:\windows\system32;', symOptions: 530, UserName: 'zunig'
OS-Version: 6.2.9200 () 0x300-0x1
C:\Anomaly\bin\AnomalyDX11AVX.exe:AnomalyDX11AVX.exe (0000000140000000), size: 16273408 (result: 0), SymType: '-exported-', PDB: 'C:\Anomaly\bin\AnomalyDX11AVX.exe'
at address 0x0000000000000000
can someone help
do you still have inverno?
idk how does it work with 3dss
yes i do
i do have inverno
like I said idk then 
k
Do you have the heat vision/thermal goggles mod?
im having an issue where i have completed the quest "classified infromation" for sakarov in yantar, I got the heavily encrypted documents out of a stash and handed them in, got the reward, but now the quest still says it is active and the way point has reverted to the stash I looted. there is no documents there cus I already handed them in
Holy shit that worked
Game doesn't crash anymore. Thanks ^^
the mods im using are:
placeable waypoint
3dss
even more hideout furnitures
extended task info
UI rework
wounds and treatment
mags redux
Heyo, trying to use FWP mod to get more fun stuff added in, followed all the steps in the video guide and the steps for the 3DSS guide for FWP and when I go to launch, I get the anomaly splash on desktop to launch and then a windows error ding and it instantly closes the program. Dont have meatchunks prefetcher on, I DID click the prefetch sounds option in the anomaly launcher, even tried turning it off to see, still getting the same issue
! log
@daring cobalt, send the log to the chat where you were asked for it.
Open your Anomaly/appdata/logs folder and send your xray_[username] text file (.log) here. (image for reference below)
Note: log file is overwritten on each game launch, send it right after the crash _ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ https://cdn.discordapp.com/attachments/1098945649929617478/1206834462411722782/log.png
OH FUCK THATS WHERE THOSE ARE
I just checked what the log said lmfao its cause i have a duplicate mod installed
Ty
Oh god...there's a lot of duplicates apparently...well this is gonna be a pain in the ass to figure out
This is the one I keep getting, im assuming its a duplicate in another weapon pack but I cant find where to access the system.ltx file, must be hidden
Nope, not hidden, I just dont see a system.ltx file at all so I cant even go there to see the error line
Hello, I would like to remove the mod that prevents weapons from being repaired and also that of the healing system to return to vanilla on this side. Could you help me please
-My game has been freezing when taking damage by human NPCs. It doesnt happen every time, usually just when im at like outposts or other places that might have a lot of entities.
I can pretty much guarantee its not my setup. I dowloaded on an M.2 and i have a 6750XT and a 5800X3D with 32 Gbs of RAM-
Realized i put this in the wrong chat
also just recently i crashed without taking damage, so im not sure if thats the problem anymore
Hi guys, any tip why I lost disassembly option on suits? I can disasseble anything else but armors while I have swiss knife, grooming kit and multytool as well
Do you guys have any idea about why my game might be getting stuck on loading screens? It doesn't even load the screenshot, it just gets frozen and then not responds
game crashed when starting a new game
any chance anybody knows what might be causing the eotech reticle to be overwritten? only wep/sight mods used right now are 3dss related mods, with no addons for it being used
for full transparency this is the end of my modlist lol, mark switch seems to provide reticles for the eotech but theyre not being used for some reason
So im kind of a hoarder and the carry weight limit is a little low for me...is there a mod or setting somewhere that I can increase my carry weight? Not by a crazy amount but just enough where I can satisfy my hoarding tick without going over board?
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
Line : 262
Description : fatal error
Arguments :
2 : [Lua] e:/stalker\gamedata\scripts\tasks_agent_rescue.script(491) :
LUA error: e:/stalker\gamedata\scripts\tasks_agent_rescue.script:491: bad argument #2 to 'sfind' (string expected, got nil)
Check log for details
stack trace:
You got new levels?
Hello, I would like to remove the mod that prevents weapons from being repaired technician please
!mechanic
@south lantern
How to give mechanics back the ability to repair/upgrade?
- Take off your NEWCOMER role here - #β©start-confirm
- Download the mod from the link provided (do not unpack the archive) β #1179484733764276234 message
- In MO2 press
CTRL + M - Select the archive with the mod
- Place the mod at the end of the list(sorted by priority) and tick the box
Note: Mechanics will not repair weapon parts, only the overall condition.
Thanks you
Guys Im noticing that artefacts and outfit attachment conditions are not decreasing. Any idea?
When attempting to transition to Jupiter, my loading screen 99% of the time becomes frozen/stuck, the other 1% will crash to desktop without a CTD error. I've noticed that when I remove squads or common squads, the transition will then work.
Ill provide my log!
When I "delete all squads" I can then load into jupiter, but "delete common squads" doesnt do the trick
Hi, i have strange bug, invisible weapon, script name. Is there any fix for it?
been having this issue all morning anyone know how to fix it? did a fresh update and all.
When I try to fast travel out of Exile Haven, this crash occurs.
Only real fix is to unfuck the mods you have
you are missing a dependency or something similar
I will try to find corrupted mods/change priority
nope. but i found a way to fix it. a mod provided that script
now i got this
Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
Line : 262
Description : fatal error
Arguments :
1 : [Lua] e:/stalker/bin/..\gamedata\scripts\se_zones.script(12) : update
LUA error: e:/stalker/bin/..\gamedata\scripts\se_zones.script:12: attempt to call field 'update' (a nil value)
Check log for details
stack trace:
when clicking "save settings" in the anomaly launcher, does that just save my settings for the launcher or does that save my user.ltx file settings?
@tiny zinc Hey, sorry for the ping. Do you know where I can find the LTX that handles Important NPC loadouts? Or any advice? Im trying equipping every weapon via the debug menu. No luck so far.
I guess it's not the case then
but they are in character description xmls
I havent gone through every weapon yet. Still some hope there. But okay thank you!
If I do "delete all squads", will important NPCs respawn?
Thanks for your help and Im so damn sorry for the bother. Where can I find the XMLs for main NPCs?
Ill provide my log once again, If you wouldnt mind taking another looks.
Im not quite able to interpret it.
it's alright
character_desc_ files but going though all of them is not worth it
Idk I can't tell much from log either
Apparently it crashes when trying to fetch default ammo type for a gun on spawn
what is this error ?
could be config error in some weapon addon
or rather conflict
figured it out
Professor Zhuk is stuck as an invisible NPC in the middle of yantar that I cannot interact with. I need to speak to him to progress quest line.
I cannot for the life of me find his character i.d. in the game files in order to spawn him via the debug console. Any help would be much appreciated.
need some help with this please
trying to use KVMAS had it working yesterday but i messed something up and had to restart now i can't get it to work at all and ive been following the instructions to the T
not to the t
forgot to disable some mod
do you know what mod
from that pic
i've disable all the ones it told me to in the guide idk
not all
check again
It says if you use one of the options you need to disable some other mods
alright.. ive just found a MEGA bug, i did the monolith wave at the barrier, then an emission started, i saved during the emission and went to bed, i just got in and as freedomers at the barrier died to the emission, more spawned, CONSTANTLY, i got down to 5fps and idk how many dead bodies there were, my PDA was all white x marks, had to reload and use the debug menu to stop the emission, on my way to loot like 100 freedomers
Gonna post this in both modded and base support. I was getting low fps, it was almost like it locked itself at 30 fps. And it had pathetic spurts of my fps increasing to 34 or 36 fps and then returning to the hell that is 30- fps. The way I think I solved this is by lowering all of my graphical settings to the worst they could possibly be. Giving the game a restart, I created a new game and saw my fps was nearing 200+ fps. Problem being, it looked like a potato, so by doing the opposite. I raised all of the graphical sliders back to max, because I rich like that. And after giving the game another restart, starting a new game. It's sitting at about 80+ fps. It rises and lowers, but it's pretty much consistent around 80 fps. Hope this helps the 30 fps doomers.
this is my problem i still dont know how to fix hey but i know how to fix my height issue and the girls are right it really is a genetic issue so i plaster metal shins into my legs and now im no longer short but now it hurts to go for a walk π
how to fix this,i am using 3dss.fixed it
is there a mod or set of mods i need to allow me to use the half shotfuns or smg with my tools or flashlight
enjoy cigarettes seems broken for some reason
like my hand bugs out
when i do the short animation it just uses the longer one for whatever reason and breaks
wtf
Fix your load order
downloaded a bunch of mods, then ran into this problem after turning off meatchunk preloader
Happens whenever I read the anomaly map for truck cemetary, the log says "calling override itms_manager.actor_on_item_use
~WARNING actor_effects.play_item_fx | item animation [itm_mapkit_5] doesn't exist!" right before the fatal error. I have many mods added on top but I'm unsure which one might be causing this.
!1087
@tawdry imp, we don't exactly know the reason for this error, but it is a random and regular one, please keep calm and carry on with your game.
Maybe in the future we'll find why it happens, but it's harmless otherwise.
more or less its something to do with one of your mods, and seeing as that's real familiar with one of my errors, i reckon its RWAP_Main
Is RWAP part of GAMMA by default?
Yeah, RWAP is part of it by default IIRC, so maybe that's why theres an issue?
Bummer, guess I'll just have to avoid reading the truck cemetary map, no biggie.
any reshade presets you guys would recommend
how do i get companions in gamma?
help
how do i fix this bs
its urgent
@dense oracle help brother
@feral hamlet i heard you made the script
GAMMA packs an old version of WPO, which my scripts don't support
search for the fix in the discord
thank you very much
uuuh
Not cool man
You should not ping people randomly
Anyway it seems like you've modified the load order or the script itself
Gamma has its own version of the script that's failing here without the get_jam_status
Also all the other mods check if the package containing get_jam_status exists before using it
im sorry bro
i take the blame
regarding the gamma script
i didnt touch it
Did you add some more mods on top of Gamma mods?
You've either disabled G.A.M.M.A Weapon Pack or added another mod that overrides the uni_anim_core.script file
a few (like 100π )
pinned messages
You can try moving the G.A.M.M.A Weapon Pack to the end of load order
If it's not a dependency of other mods loaded after it, it should work
If it is - well - you'll need to resolve the conflicts yourself
Doesn't matter
If MO detects duplicate files in mods, it uses the last one in load order
Gamma has like 20 mods that contain uni_anim_core.script
Most of them are probably the same, but the last one loaded is the most important
I'm looking to do a clean reinstall of GAMMA. Was the issue with moddb and their WAF sorted out in the end to allow the installer to do its thing ?
not yet
OK thanks Oleh. Also.... if you remember my issue from the other week (probably not), upping my laptop from 16GB to 32GB didn't work. π¦
Don't worry about it... I think I need a clean install because I'm currently running a mod count of 542 and the old UWP which I think got replaced by Frosty's... so it's just best I reinstall when the installer becomes available anyway.
yeah I think that's one of the gamma crashes that you just cope with
it's very rare unless you start the game in outskirts though
I started as an Ecologist in Yantar. I was able to access the Outskirts initially. I have a few additional graphical mods on the go like ADEGA and some additional models as well. I was at the point in the play through where you go with Rogue from Jupiter to the Outskirts via the Underground, and that was when I first noticed it happening.
have you tried deleting squads btw?
how to increase the bearable weight for a partner?
Yea I did try the fixes. It didn't work.
hey guys give it a way to change the raindrops on helmet vision ???
i want more raindrops that it is more immersive
hey , yesterday i asked about this error that im facing in gamma where i load my save and it crashes after a few seconds , @proper dagger helped me out about it but when i tried to run it after doing all the steps it just gave me the same problem , after which i replaced the launcher and the downloads folder .. so im wondring whats the solution for this issue?
how can i revert into 444 mods on mo2?
Can you stop pinging me for no reason
!scrambled
@raven scarab
- Close MO2
- Go to
GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/ - Copy this file:
modlist.txt - Paste it in
[YOUR GAMMA FOLDER]/profiles/G.A.M.M.A., replace when prompted. If you don't have aG.A.M.M.A.folder inprofiles- create it. - Launch MO2 again
- Select profile:
G.A.M.M.A.
Follow the example below:||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://media.discordapp.net/attachments/1098945649929617478/1277122614489514005/image.png?ex=66cc049f&is=66cab31f&hm=a0fea04af5a62bf46b1bfb592dc433aea7fa48c3180ec6c2d60cdb5d29fba656&=&format=webp&quality=lossless
hey guys i have aproblem with gamma the rain droplets just wonβt appear in my maskβ¦
oh shi sorry i forgot that i had you mentioned lol
the same thing happend
idk whats the reason
when entering AW i get tihs. i tried changing to DX10, disabling some mods (like western goods) idk anymore what should i do
Hello people !!
I've got a brand-new error message that I couldn't find anything about on this entire discord server, nor online.
Here's the error message --
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(31) :
LUA error: ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script:31: attempt to perform arithmetic on a nil value
Check log for details
stack trace:
! [LUA] 0 : [C ] __mul
! [LUA] 1 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(31) :
! [LUA] 2 : [C ] ph_item_box
! [LUA] 3 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(9) : get_box_manager
! [LUA] 4 : [Lua] ...nomaly/bin/..\gamedata\scripts\bind_physic_object.script(171) :
The weird part is that the scripts-in-question in the error message, the "xr_box.script" and the "bind_physic_object.script" aren't overwritten by ANY mod !! In fact, I first tried to search for these files in the right-hand panel of MO2, but they're not even there. I discovered them in the 'overwrite' folder, sitting at the bottom of the MO2 list (you can double-click on it, and it opens a pop-up displaying the files that can never be overwritten by any mod.
I'm guessing these two scripts are some uber-sensitive, must-not-touch type scripts or something. Any help/guidance would be highly appreciated.
EDIT 01: The game runs absolutely fine everywhere, BUT as soon as I enter Agroprom and walk a little forward, this error pops up.
I've used 'jump_to_level' command and have gone from Cordon to Army Warehouses, Truck Cem, Dark Valley, Garbage, Swamps, n all. Quite early regions. But the game doesn't want to enter Agroprom.
Again, please helpz !! π
Is there a way to fix this that doesn't involve just resetting the amount of mods enabled?
oh and also: i am using these mods + 55- Mutants Bleeding - Arszi
[SCRIPT ERROR]: ...ly\gamedata\scripts\zz_demonized_damage_modifiers.script:57: attempt to compare number with nil
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ...ly\gamedata\scripts\zz_demonized_damage_modifiers.script(57) : on_game_start
LUA error: ...ly\gamedata\scripts\zz_demonized_damage_modifiers.script:57: attempt to compare number with nil
how can i fix this ?
Fairly sure not a default gamma mod
I wonder what is the significance between the mods ending in errors along the lines of 16
It's been 2 ui mods now that have done it, one crashed the game because of guide books somehow and this simplified ui one just crashes outright without getting in the main menu
I'm getting this error, followed by a crash when I tried testing the Legend model for Military and Mercenary with HD Models for GAMMA v3.2. Should I be worried? Or is it perfectly fine?
I have really bad blurring when using the Spas-12 but no other weapon. I have gone through console commands and editted the scripts for DOF, and used the in game mod configuration menu to disable DOF with no luck
I just re-installed SSS and in the installation settings, unchecked weapon DOF - but the problem is persisting. I don't understand lol
Is Not enough memory resources are available to process this command still a random crash?
usually you can get an engine stack trace for them
does it crash upon specific action?
It seems to have stopped but originally it did.. I loaded into swamps and it happened shortly before entering a camp.. Then I reloaded and ran into the camp and shot a Bandit before it happened again.. On the 3rd load it stopped..
First crash I was taking it slow and 2nd I sprinted.. So it might have been the "same" thing that caused it.. It just happened "later" because I sprinted.. But it stopped and I finished what I wanted in Swamps and left.. Was just double checking if it's random because I had it 2 times in a row in roughly the same spot
I heard shots in the distance so I'm guessing it was something related to whatever happened there
did you have a pump station task?
Nah was going to Swamps via the level transition between the Rookie Village and Military Outpost.. Was on my way to hand in the Artifact Hunters quest by the Church in the Swamps.. Screenshot shows the little camp by the transition point.. I walked close to the entrance before the first crash.. Then I sprinted into the camp and shot a Renegade before the second crash.. Then read somewhere here that it's random, so I loaded up again and it stopped..
https://www.moddb.com/mods/stalker-anomaly/addons/fdda-enhanced-animations-medical-exo-anims https://www.moddb.com/mods/stalker-anomaly/addons/fdda-enhanced-animations-enhanced are both of these mods compatible with base gamma? or do i need to adjust files, pretty sure gamma has all of the required mods unless i missed one. also how do i add mods to gamma
A collection of medical item animations, models and textures for FDDA. Sister mod to FDDA Enhanced Animations - Food and drinks. As many items as possible were converted to fancier gunslinger animations. Some items had their use sounds replaced/enhanced...
You will need to read the description for the mod to see what else you need
i did, the only one im not sure on is the medical/exo requires T.H.A.P but i dont know if gamma has that
and i was told these are just drag and drop mods for gamma no extras required but idk
so yes, gamma used to have everything required
not anymore. you need one more mod to fix the exo changes
will adding all three cause any issues you think?
you need to specify what 3
the two i linked as well as the required THAP
im confused, you said it used to have it but not anymore
Gamma used to have all the requirements, but not anymore. now you need one more mod to fix the exo
i didnt realise "THIS" was a link to a patch im dumb
I'm having visual glitch as shown in the picture. I was following the "Disabling SSR in SSS" in the fps-opt chatroom and i got this after disabling said effect. Could anyone help?
!shader
@analog edge To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
cheers! silly me forgot to do that
@quiet tangle Hey there !! Could I bother you with a look into the error message I am running into.
gamer(derogatory)
What did i just witness
you are asking a bot
So it's a BOT !! I would see his comments everywhere, and just thought of him to be a top-level mod guru guy π π
holy fuck, fuck modDB, imma just clean install the whole modpack
so i installed that 3dss thing and finally made it work after it breaking my save game ( i had a modded 412 Rex with a scope. With the Mod it deletes that upgrade and kept breaking my game). The issue i have now is that i turned all weapon dof's down ( i just dont like it in games) and my Scope looks like this.
but when i turn on night vision its blurry af
and i cant find a fix for it. In the 3dss github was the mention of improved beef nvg's but that doesnt fix it. Altho that mod is nice
intended
I just cant wait until gamma update
Support will explode with these quetsions
well its kinda stupid because without the mod some scopes work with nvg's on. Like my Specter works with nvg's (even irl as a fun fact π ). With the mod it stops working.
I mean its just confusing as you dont know whats workin and what doesnt. Like the seperate NVG Scopes work flawlessly. I dont have a sniper rifle with an upgradeable nv option so i cannot test those
its my early christmas gift to the helpers
This is default now. And its realistic
so use an NVG scope if you want to snipe in the dark
or a thermal
I would like to get some help; I don't know why my log has all these errors. I have only added two mods which are skills expansion 2.1 and fillable canteens.
As i said a Specter works with nvg's in real life. So "realistic" could be debateable espacially because Binoculars work ingame with nvg's on wich also should have the DOF effect because thats what you would get IRL or at least it looks like shit. I do not snipe during night time i just happend to notice.
except further updates make Binoculars having the DOF effect with nvg's on π
no they dont
research was done
it was all tested
No scopes do
probably never heard of the TA01NSN just saying.
and Binoculars do not work well with night vision goggles because thats just how it is
The binoculars work because they're an overlay. Nothing was changed about them. The system for scopes is totally different
oh so its an engine thing
It's not a matter of realism or not with them. It's that the scope system doesn't work with the binoculars
my bad then
@olive berry hi again. Could I bug you with my CTD error msg ?
you pinged me, so you already bugged me. Dont ask a question about asking a question - just ask
I've got a brand-new error message that I couldn't find anything about on this entire discord server, nor online.
Here's the error message --
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : D:\a\xray-monolith\xray-monolith\src\xrServerEntities\script_engine.cpp
[error]Line : 262
[error]Description : fatal error
[error]Arguments :
1 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(31) :
LUA error: ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script:31: attempt to perform arithmetic on a nil value
Check log for details
stack trace:
! [LUA] 0 : [C ] __mul
! [LUA] 1 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(31) :
! [LUA] 2 : [C ] ph_item_box
! [LUA] 3 : [Lua] ....k.e.r. -- anomaly/bin/..\gamedata\scripts\xr_box.script(9) : get_box_manager
! [LUA] 4 : [Lua] ...nomaly/bin/..\gamedata\scripts\bind_physic_object.script(171) :
The weird part is that the scripts-in-question in the error message, the "xr_box.script" and the "bind_physic_object.script" aren't overwritten by ANY mod !! In fact, I first tried to search for these files in the right-hand panel of MO2, but they're not even there. I discovered them in the 'overwrite' folder, sitting at the bottom of the MO2 list (you can double-click on it, and it opens a pop-up displaying the files that can never be overwritten by any mod.
P.S. -- I've used 'jump_to_level' command and have gone from Cordon to Army Warehouses, Truck Cem, Dark Valley, Garbage, Swamps, n all. Quite early regions. But the game doesn't want to enter Agroprom.
My gamma keeps opening like this
@hearty geyser ???
wHY DOES MY SKY LOOK LIKE THIS
:(
yeah idk how you manage
check overwrite section at the bottom of mo2 load order
and show what's in there if there is something there
Tab out and tab back in
mf really wants to be banned from every helper out there
what did you install?
Sky looks just fine
I turned on Trader overhaul, but I did that probably 20 hours of gameplay ago - am only ust now gettings this error
!tro
@unique spear
DON'T enable/use Trader Overhaul, it has not been updated for a long time and is no longer supported.
Use 340 - Black Market (Buyable Gear) - SalamanderAnder & nox instead. More about this mod in here: #βπfaq message
!disabled
@unique spear Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #π€bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #π¨base-gamma-support, use #π¨modded-gamma-support instead.

not a UGP problem
gotta be ui rework
egui?
Wdym
what mod did you add?
I think this is like the fourth problem you've had today meph. Do you just intentionally break your shit or do you just add mods without looking into them first?
help?
3dss mod, anyone know a fix?
which gun?
sr-25 modernized
make sure you have the latest update of the sr25 pmc mod
as in the frostys weapon mod?
were on 10.7.24
i should've specified were using his 3dss
nvm we fixed it, thanks for the help tho
i forgot to tell him to delete shader cache
im trying to install the Inverno retexture and i have turned all the mods off it says to in the description of the mod no Atmospherics reshades on. Does Atmospherics also need to be entirely disabled? I used all the settings recommended but I have green shadows and the snow texture doesnt work
No donβt disable atmos. Remove shaders cache from appdata
Type in console ssfx_lut 0, 0, 0, 0
awesome, snow falls now and green is gone, but is there a way to downpatch the mod to get the winter grass back?
at this stage, the grass is completely disabled
will be C Con frozen grass, in the next update I think.
unfortunate, but thank you for the help
Running enhanced GUI extra
literally havent posted here in a while, what fourth problem?
no matter what i do all knives looks like this one
Yeah idk all UI mods basically hate either that portrait 16, the GSC disclaimer or the guide books for whatever reason
Sometimes you can't even get into the main menu it's so bad
With them sometimes conflicting with unlit campfires of all things
It is all kinds of absurd
I just got jumped by a wild dog and the game crashed and this popped up ??
CAN'T... SIMULATE... TWITCH... MUST... DIE!!
is there a mod to complete quests from pda ?
Is there a way to make the pda more high resolution?
No?
What do you mean?
!autocomplete
@desert quest get the Autocomplete mod below β¬οΈ:
- Download the mod: https://www.moddb.com/addons/start/247448
- Open MO2, press Ctrl+M, find the downloaded archive
- Keep it at the bottom of your modlist, check the tickbox.
Get the 1.5.3 patch for it
when entering AW i get tihs, whether i have tasks there or not. i tried changing to DX10, lowering graphics, disabling some mods (like western goods) idk anymore what should i do
if you need more information about mods or whatever, let me know :))
THX!
Hi guys, any tip why I lost disassembly option on suits? I can disasseble anything else but armors while I have swiss knife, grooming kit and multytool as well
is there a mod or setting to adjust how weapon condition works? i think before it was tied to weapon parts condition, like armor (and i think thats how its gonna be in 0.9.2) and i wanna return to that
Weapon parts have condition and gun itself has its general condition. you are not changing that
damn
Anyone have any like really important tips to running Warframe on Gamma? I've been really wanting to try it
Ooops xD Warfare
Gamma isnt mean for warfare

Either way its more of a question for #ββ’stalker-chat or #βπ°β’newbies-chat
okay, thank you!
Is this thing fixed or will it pop up again when i try to play the game
does anyone know why this says no valid game data?
is says i needa correct the directory layout using the content tree?
Why would you even install that without checkign if gamma has that first
Gamma already has this mod
the high detailed hands?
i was tryna find the one from this vid https://www.youtube.com/watch?v=1fRawJFOILE&t=45s
Stock vanilla graphic settings as is installed, GAMMA - default 'GAMMA reshade', Custom - default Custom reshade, 4k resolution, no texture mods, modlist as is by default installation, same or similar hour and weather conditions.
Gameplay from Anomaly Custom mod download link - https://rb.gy/rwxtdy
Visit the Anomaly Custom mod website - https:/...
again, gamma already has that mod you linked
!get_jam_status
pins
Sorry
Does anyone have an issue where the npc stalkers guns arenβt in their hands properly but are floating off them a bit ? Or know how to fix this ?
3dss stopped having reticles after i installed these and disbling them doesnt fix it
are you using reshade?
not that ik of? zone reality isnt a reshade and was never enabled and emergent zone isnt one and i think 3dss was working with it
well, go to #1306026800480256010
Also when the gun is holstered on their back it is completed offset from their body, itβs a bit immersion breaking lol
Hd models?
Yeah I am using HD models as well as the patch
crashing when trying to enter Pripyat. Suspect a Monolith has a weapon/ammo that is/has buggered. Thank you very much for taking the time to help if you're able
Log:
!![ERROR] CInifile::r_string: S = [(null)], L = [k_dist]
FATAL ERROR
[error]Expression : S && strlen(S)
[error]Function : CInifile::r_section
[error]File : D:\a\xray-monolith\xray-monolith\src\xrCore\Xr_ini.cpp
[error]Line : 1193
[error]Description : assertion failed
additional mods shown
Problem of the models so no solution
! crashtravel perhaps
@versed breach If you're crashing on "transition" or "fast travel" to a certain location or from a certain location: #βπfaq message
@olive berry are all HD models having this issue? Or can I find one thatβs alright?
Gonna try that. The crash occurs right after the loading screen to Pripyat so hopefully that works
guys i need help
i dont know hat happend but for some reason i keep finding way too many artefacts on bandits
and i mean like 5 artefacts on one dude
it may have something to do with ZCP but idk
could have killed loners and took em
cant be
i killed like 20 bandits and on like 15 of them were way too many artefacts
hey so i redownloaded gamma and the mods active are 365 mods in total .. i downloaded the modpack from the message about 444 mods in this server
im trying install 3d scopes and follow to the tea does anyone know why this happens? it crashes with this when i click new game
Not a 3dss problem
tcwp installed?
what is tcwp
weapon mod
have you installed any?
only the one that comes with gamma retrouge addtional weapons i think'
Hey i loaded a save and now i cant see my hands or anything im holding, guns, knife, pda, item animations, game restart and loading saves doesnt help?
check if HUD is enabled in settings
lmao wtf how did that turn off tysm
hey, since i disabled BHS to make SidHUD work, can you tell me how to change the meds effects, since i dont need any limb heals anymore?
https://www.moddb.com/mods/stalker-anomaly/addons/dltx-machine-pistols-sawn-off-in-sidearm-slot will this work on gamma?
Without BHS you dont get any limb heals
probably not
Hello! I am trying to play on 21:9 and the minimap goes out of its bracket, i tried to install the girth mod that supposedly fixes many widescreen issues but the game just crashes when trying to load any save if its enabled.
Is there any other way to fix the wide minimap that comes with 21:9?
this is the error msg when i try to launch into a save
This is what you get fo using 21:9
you chose suffering
!ultrawide
@real brook
Complete UI overhaul for ultrawide (that also fixes the minimap): https://discord.com/channels/912320241713958912/1169311822139105380
thanks lol, illy try out DART
DART fixed all the issues, thank you very much
Yo, can someone please help me figure out how to remove my Snow mod? I'm back for some Stalker after a while and I installed some winter mod that I can't manually find in the mod list. It's not YAMM, and it's not Inverno, or at least I can't find them in the list.
Simpler to revert to default
Holy cow I actually managed to find it. It wasn't coming up in search no matter what I write, but it actually was inverno and I turned it off. Cheers!
I'm still getting this fatal error
I turned off trader overhaul and enabled black market but :(
Hi. I can see 'fair fast travel' mod in the list of mods but the functionality is missing (I have 1 fast travel option that costs nothing and I don't see configurations for fair fast travel in the MCM). How do I re-enable it?
guys is there a way to accept quest via debug menu?
I cant get Last dawn quest from Spore because of some mod (prob KVMAS hd models) and waiting for him to respond
!modlist
@unique spear Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
Install the actual patched kvmas models and start new game
what you have is not made for gamma
ty for the help I appreciate it 
"0339","-","G.A.M.M.A. Economy"
"0340","-","G.A.M.M.A. Economy no BAS injection"
π appreciate you
Did you ever figure out a fix to this?
Hey @olive berry !! Here's the details of the overwrite folder
I installed his full realease, newest one from few days ago
and his quest patch
Delete allat
You didnt
you installed KVMA's pack he released
not the merge pack
so the newest pack from KVMAS is not for gamma?
Never was
Some of my guns are missing audio and was wondering if any of yous can point me in the right direction to get this fixed
every time I go into radar I get this error I have HD models installed
these are some of the weapons that don't have gunshot audio
I've enabled 210- Disables Music in game but not in main menu, G.A.M.M.A NPCs cannot see through foliage, changed 289- Grass Tweaks (reinstall for different options) - Aydin, and added Reworked Red Dot Sights (v0.7), Dynamic Emission Cover (by Utjan), Even More Hideout Furniture v2.2
@olive berry Tried playing after deleting all the files from the overwrite folder ... Same error ... π¦
look at HD models guide
probably #1175845400507322398
well i dont know anymore
Paging @mystic sinew Hello my friend !! You've bailed me out in the past with the anomalies in my gamma mods, thought I'd give you an ask.
Thanks man, that fixed it
Hi there, I find my own footstep sounds to be very loud. I tried the EFT footsteps addon, but that only makes it more annoying. Is there any mod that allows us to tune the footstep sounds?
mirrowel

it works
what does UI mod have to do with reading recipes
hey i didnt update my game for a while do i need to install each update seperatly or there is a link for all the update
you dont want to update right now
so i can download the launcher but not the game
cause i dont knoe if my game is really up to date cause i havent for a long time
play*
if you have the game - just play for now
My game keeps spawning skeletons in brain scorcher for some reason? Anyway to stop this?
Testing whether or not I need to lower every single graphics setting to poop mode. Restart game, and test it. I'm trying to replicate this, because it seems by doing this, then restarting with everything on low my fps shoots up. But then, since I don't have a shit pc, I want ultra everything. I do the opposite and raise everything to max, restart, test and my fps I back to normal. If I replicate this and I'm right, I'm sorry but I'm not doing that everytime I launch the game. I'll go play EFP.....\
I have to lower every single graphics setting to zilch, restart the game for the changes to take effect. Then I have to do the opposite and raise them all back up, restart again. Get into the game and my fps is back to normal in the 100+ range of frames.
Everytime....
So you have low frames.
Maxing out SSS settings destroys fps
having NPCs around does that too
some mods lower fps over time too
I can't seem to narrow down exactly what is causing this.
well is it happening on default gamma
But it seems lowering then raising them back up across the board, like every setting gets it back to normal.
seems very strange
I have Adega, 3DS Scopes and Arrival, everything else is default but I do have a few mods in Gamma disabled by default enable in the mod manager.
which are?
Mainly to do with the traders, and manually reloading mags.
I took a break from Gamma for a few months, and now I came back a few days ago and I launched it for the first time in forever and I'm having these fps issues.
I am testing this for a matter of fact to see if I'm right, right now. Basically to replicate it.
do you still have blood pools on?
I turned that off, it's been off throughout all of my testing, but that might be an issue as well.
I haven't seen much of a message history here specifically about blood pools on this server yet, so maybe I can test that out as well.
I can't replicate it, the lowering and raising of the graphical settings are completely random. I have no idea what's going on.
Should I just reinstall gamma? Honestly I might just start and finish Call of Pripyat and Stalker 2 is literally about to come out so. I've got plenty to keep busy with.
The issue might have been the fact that I had Anti-Aliasing on 8x, turned it to 2x reset and that seems to have fixed the problem.
I'm scared to test whether I'm correct or not, it running perfectly right now, which shows that my pc can handle maxed out everything.
Except AA apparently.
Aqua if you have nvidia graphic card try disable smaa and antialising and enabling DSR factor i have 2k monitor i use 4k DSR 2.25x DL resolution it makes the game look pretty with out having any fliking textures at far distances
@slim plover Did you ever get an answer to getting rid of the black square when you moved the minimap to the bottom right. I am now encountering the same problem and would like a solution. It's distracting.
Hello, can someone please advice me a solution about my problem? My GAMMA usually gets stuck on the loading screen. It doesn't even load the screenshot. I have to close it from task manager and try again but 80% of the time it gets stuck. I don't know if it because of my mods because I booted up GAMMA as vanilla too and it gets stuck too.
So I reinstalled my windows from 10 to 11 and after setting everything up I accidentally updated my GAMMA install. So now I cant even open stock gamma profile but anomaly 1.5.3 starts just fine. Is there a way to fix the issue?
where?
Does the gamma pack have demonized exes in mo2 or do I still have to replace anomaly files with it, Iβm trying to get colt .357 mod to work
Hello, any idea on how to resolve this error ? "The instruction at 0x000000000000000 referenced memory at 0x000000000000000. The memory could not be written"
can anyone give links for 3dss mod and install guide please?
Can somebody help me with BAS Scopes Extravaganza mod? I changed most of the optics in the mod by reinstalling it and choosing different options, but when I boot up the game all the optics are back to default. Any ideas?
!hdmodels
@red wyvern
Remove the NEWCOMER role to access the link - https://discord.com/channels/912320241713958912/1029827096488452137
You have two options, do NOT install both, choose only one:
You need to copy files and rename to replace the missing ones
i have a bit of a noob question regarding a modded gamma installation: i've made a separate profile in mo2 for my modded version, but what happens when i press install/update in the launcher? will it activate/deactivate certain mods, will it add or remove mods etc? or does it just update whatever is in MO/mod folder? ive changed the mcm values thing since before so im not concerned about mod settings
I am thinking of getting back into gamma. I was wondering if fsr 3.1 works in gamma and if there are any mods that may help with things like ghosting?
Your profile should be fine
No and no
Well unless it's a driver thing
Then it probably will work
I believe it can be done from driver, right?
yeah im running AFMF2 right now and it seems to be working, but thats driver level for AMD cardds
From Pripyat to Outskirts map transition, game crashes to desktop. Could anybody help please? Thanks in advance!
thanks
Can you screenshot the error?
It's probably trader overhaul or disabled gamma economy
There is no error actually. It just shuts down completely without any warning.
what about the lossless scaling app from steam? could that work?
I've been using it for about a month and it's so good. I recommend it!
no ghosting or other major problems? nothing a mod needs to solve?
you like it better than fsr 3.1?
So, should I enable or disable anything? My game has a lot of extra mods, and I didn't update GAMMA for a long time (still on Anomaly 1.5.2 version)
I am on phone, so I can't look at your log
I didn't try FSR 3.1, sorry. However, I've been using Lossless Scaling since Grok mentioned it in the announcements. It helps with FPS a lot. However, it doesn't reduce stutters as I expected.
same. my game is stable so I'm not updating it to 1.5.3 until the next gamma update
I'll send a screenshot of last lines then
Most common error is : "Invalid position for CLevelGraph::vertex_id specified:"
any idea what mods cause this crash ?
Incorrect install can
Show your last mods
the bottom of the mods list ?
Yes
BHSRO needs to go last
installed modded exes and now im in trouble
Sorry we can't get you off a government watch list
Did you clear your shader cache?
from what i read from this forum, this is some kind of unknown bug that even dev doesnt know how to fix, the only solution is to load your saves before this bug happened (mine happened 9 minutes after my last save)
good luck
so now every time i got the chance to quicksave (daddy save), just save it before this bug happened again
shit, all good, saw the couple posts above that
Hi, any idea how i can change hud_fov of rebirth animation
I already tried cleaning shaders cache and deleteing user.itx
bois, i think I'm stupid - I can't find the adega mod to download. Where do you guys get it?
Guyssssss.
I got that, you tried changing direct X version?
After some tweaking i think a mod i installed named "enjoy cigarettes" i kept it at the bottom but after placing it a little above i managed to run the game fine
ah cool
Trying to instal Redotix / GAMMA-3D-Shader-Based-Scopes; and game doesn't wan't to launch, any suggestions?
any way to fix this issue ? it happens when i delete the shader cache for a thermal vision mod. Also i already have inverno installed rn i asked many times but i got no answer .And for your knowledge this happens when i delete the shader cache.The reason i want to delete shader cache it to make the thermal work
Is there a way to find my companions, it says there close by but I canβt find them what so ever and they donβt show on the PDA
Hi, have a problem when im aiming wit scope, i have a fps loose, please help thanks
G'day gents, I'm encountering a random issue that arose mid-playthrough. For some reason, even though I'm playing with DX8-AVI, Anomaly wants to cache a shader file??? I've tried the standard fixes but no luck so far. I've attached both the log and my modlist below and would be so appreciative if someone could help me figure this out.
Sorry, this is the error. It's not trying to cache a shader file but looks like it's doing the same as the others above me:
hi, where can i find attachments list in .ltx file?
So I'm getting this error just after finishing dialog with Strelok during Operation Afterglow: Loose Ends
Expression : mapData.RowPitch == int(pTheora->Width(false)*4)
Function : CTexture::apply_theora
File : D:\a\xray-monolith\xray-monolith\src\Layers\xrRenderDX10\dx10SH_Texture.cpp
Line : 296
Description : assertion failed
stack trace:
is there any mod that traders can sell weapons and armors
thank you
items are very expensive but imo. its good. Also you can sell gear to traders if they're in good condition.


