#π¨base-gamma-support
1 messages Β· Page 459 of 1
!forme
Here is an example of how a Helper might respond to someone _ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _https://cdn.discordapp.com/attachments/1098945649929617478/1107327970588233840/image.png
this has no crash - did the game quit out with the Windows error noise?
So i just downloaded the new version and launcher, I never knew about so it was from 2 years ago. Hopefully things, improve?
yes. very much so.
ok, if anything I will come back and update after a while
@keen cedar Where would I find my crash log for anomaly as for my install just seems to crash at random intervals today
Anomaly/appdata/logs, second file (should be a text document called xray_yourname). It overwrites every time you run Anomaly so it's best to send it right after a crash
Hopefully that is helpful
There was the windows error noise when it crashed as well
you should note that unless the crash happens consistently and reliably (e.g. always when loading a specific save, always when going to a specific area/talking to specific npc/doing specific action) it is unlikely i can recommend a specific fix
yep machine address stack trace error. nonspecific error. is there any common action that triggers a crash
where is the shaders file located
@keen cedar it has happened 3-4 times today and it is usually when I am in combat with something
!shader read below
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
i need to put my new preset in
can i ask who is the author of Gamma weather addon?
this crash seems to have happened after you turned on nvg, after a fight
yes
i like to see where i can usually see the info about it
@keen cedar A shoot out with some bandits , some mercs and more bandits
well, the "you're not gonna like this" part is where i tell you the standard troubleshooting step for machine address stack trace errors are "reinstall everything bit by bit until it works again"
does the crash persist if you reload an older save and get into the same firefight
like will it ALWAYS crash you out if you repeat that fight
nowhere unfortunately unless you're good at reading the contents of the files
@keen cedar no it usually lets me progress for like 30 minutes or a little longer
as in you get into the fight, the fight ends, and then it crashes afterwards?
during
i'm confused what you mean by "lets me progress for 30m or longer"
i am trying to see if the cause might be e.g. bugged NPC inventory or loadout. but it doesn't sound like it.
so we're back to "reinstall everything bit by bit until it works"
like I will reload the save prior to the crash and then I repeat the fight and it doesnt crash until like 30 minutes later essentially
yeah so the fight isn't causing the crash.
that's what I was figuring since I know during one of the events I was running for cover
yup.
back to "reinstall everything bit by bit until it works"
!full // recommend you start by reinstalling mods since this does not impact saves
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
bro, finish updating your game with the new launcher then come back
Alright thank you I will let you know if it works
lol ok boss
if that doesn't work reinstall anomaly. if that still doesn't work, see if it crashes on new game/first firefight in new game
Alright I will do so , Thank you !
good luck
why are there gamma dissable optioons? for example, i had tick a few of them but a lot of red appears and im not sure if it inerferes with the main mod that is packed already. Like, weather would interfere with reshade? or so I read somewhere
!disabled
Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #π€bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #π¨base-gamma-support, use #π¨modded-gamma-support instead.
if your game can't even run yet, don't fuck around with the modlist
ohhhhh
thanks, the problem was solved
good, if your game works go to #β©start-confirm and remove the newcomer role
when i open the launcher as admin it automaticalls goes to my anomaly folder i dont need to click it,is this a issue
...no?
it tells me you probably didn't delete the ini file
ModOrganizer.ini
one file
it doesn't want you to delete all .ini files, it wants you to delete a specific .ini file
@keen cedarSo i loaded into the game and wondering why are all the settings and the main menu black out? I cant find any settings that alter the color of the wording. I can barely see any texts
!blackfont
Disable Tactical Fonts in MO2 (ModOrganizer)
Okay so I might have ran into a bit of a problem. I was messing around with ZCP in the Mod configuration menu, and lets just say I overdone it. Now every time i spawn at a place, there is a billion stalkers which causes the game to be unplayable. Does anyone have any tips? And if not, is there any way I can set those settings back to default?
!zcp
Default settings for ZCP:
Mutant pop: 0.5
Stalker pop: 0.4
Squad size: 0.9
Squad variance: 0.1
Mutant squad size: 0.7
Squad size variance: 0.15
!debug // re: the one billion stalkers, enable debug mode then open debug menu (F7), choose "Delete common squads", this deletes all spawned-in NPCs
How to enable debug mode: #βπfaq message
it will destroy your task list but at least you can play again
Tried every Directx and got this same memory error each time when I hit last save in the main menu. I normally play Directx11 if that helps fellas
!modlist share modlist, i wanna see which mod you're missing
Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
!modlist
Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
sorry am new to discord
it is stuck downloading anomaly gunslinger can i cancel and download off the internet
!gunslinger // yes.
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
S.T.A.L.K.E.R.-Anomaly-Gunslinger.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/TeivazCZ/S.T.A.L.K.E.R.-Anomaly-Gunslinger
2.1) Or from the mirror
https://mega.nz/file/hd9wXCLT#z7zA5PLazcKa3z2GyZLyjOCy9zAgrKrR9Pw1gj9dxMg
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
S.T.A.L.K.E.R.-Anomaly-Gunslinger-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Uncheck all boxes except:
Force zip extraction
8.) ClickInstall / Update G.A.M.M.A.
in your case though, instead of step 7, do this:
Only disable "Force git downloads"
alright
here is the modlist gigantic
oh i see you are missing multiple mods and also tinkered with the modlist.
don't do that until the game loads
!full // start by running a full install again, follow the steps below
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
Hey y'all I'm getting this error about a texture file whenever I try to enter the Outskirts, I'd appreciate any help y'all can give me.
Oh yeah I have tinkered around and it has been working just fine for 20 hours or so, I haven't messed with any mods for a couple days and now I randomly get the memory error
!largefiles // presumably missing/corrupt texture file from a mod here
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
gamma_large_files_v2.zip
gamma_large_files_v2.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/Grokitach/gamma_large_files_v2
2.1.) or from the mirror
https://mega.nz/file/IVEHCRIY#JahXdS5zwC3qp7vX_5mlUQ2MVo1S7pSqEr-BP1IPV5I
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
gamma_large_files_v2.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
gamma_large_files_v2-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Disable:
"Force Git Download"
"Update Large Files"
8.) ClickInstall / Update G.A.M.M.A.
you're missing default mods completely
e.g. retrogues, gamma specific mods
do the full install.
is the limited fast travel absolutely necessary? I believe
will do thank you for the help sir
will I lose my current saves or how do I preserve those?
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
read the message first pls
I got this error? Any ideas, im gonna try and update - it has been a month or two
!1080
Tick "Pre 0.9 Save Fix" addon in MO2.
Note: if this doesn't work, you will have to start a new game.
Alright i'll try this after update, thank you
it finished installing everything (i think) it is not responding can i close it or do i freak out
updated the game and since then neither emission or psystorm are occurring properly. From time to time i hear the crows going nuts and that's it.
it says that there is 441 mods in MO2, is something wrong is that good
You need to leave the installer alone until it says Installation finished or complete. Do not close it before you see that message at the bottom of the text window.
!blackfont
Disable Tactical Fonts in MO2 (ModOrganizer)
The last portion of the install takes a really long time. In the background it is extracting all of the mod archives that it downloaded.
i followed the manual download instructions for gunslinger i hit install again without force git downloads is it going to do it now or would im maybe have to do it manually or something
Well you were given instructions on what to do. If you ended the installation process before it fully finished and said installation complete then there will likely be something wrong. You can try to run things but I wouldn't be surprised if you ran into issues. For example you are only supposed to have #π577-mods-in-mo2 not 441. It looks as though there are a lot of things active in MO2 that shouldn't be. Unless you manually added or activated mods outside of the default list.
Perhaps when someone else comes in they can compare your modlist to the default one. I don't have the default list at the moment.
!modlist Do this for when they come in so you can be ready to get help. If you want to.
Follow these instructions to send your mod list: <#βπfaq message>
(if you're using this command somewhere else, send the file where it was asked)
Hmm I did a fresh full install as recommended and am still getting this memory error when trying to load into my last save on the main menu. Have all 380 original mods. Game was working fine for hours and hours besides the occasional crash and then this started happening
the game crash when i go near the bar entering from garbage
What is this?
you mean the name or the file ?
Do anyone know this error, its crashes me when entering Agropom
I meant why the fuck did your put Anomaly/GAMMA in CoP?
It's just the name
I deleted all files before installing anomaly
!move // first of all, I am going to recommend that you move the installation, mostly to reduce the total file path length, as this can negatively affect the game. If the issue persists then we work from there. β¬οΈ
Follow this: #βπfaq message
Good morning π I still need some help with this error
can someone provide a link to mod organizer please?
what might be causing my fov to reset when i reload a save only occasionally
ive normally got it set to 80 and .8 factor
sometimes when i reload it goes down to like 48 and factor stays the same
@pearl hill dying while using freezoom
anyway to fix it other than not using free zoom
Hey, im getting this problem where the anomaly 1.5.1 download is stopping at 0.0b full download but not completing, any ideas?
no other way. i recommend not using freezoom - thats what scopes are for anyway
!torrent // download it using torrent
You'll need a torrent client, I suggest qbittorrent https://www.qbittorrent.org/
Once downloaded and installed, open it and go to File > Add torrent link⦠and copy paste the torrent links in the text box
This is the official torrent for Anomaly 1.5.1:
magnet:?xt=urn:btih:c307c208636d1fd98ca4fe70ca0c692035659855&dn=Anomaly-1.5.1.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce
This is the official torrent for Anomaly update 1.5.2:
magnet:?xt=urn:btih:06580e9c871086d5b847a84940bd89b6d97c975f&dn=Anomaly-1.5.1-to-1.5.2-Update.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce
hellou wish a nice day.
got troubles with text-sizes and overlapping icons in the game, text sizes like notifications are too large. checked installation and game runs smooth without any problems but my radar (minimap) is i nthe rightcorner too isntead up the screen centered
gotcha, will do
how to fix minimap not showing even i click slash to toggle the mini map
So I "finished" installing the modpack through the launcher but I only have 194 out of 380 mods, plus a bunch of βs in the flags. What is the fix for this? Just running the install/update GAMMA wont break anything will it?
did you download the other one that label downloads where all mods are
elaborate...
i encounter that same problem of yours yesterday but i only missing the download where all mods are on the file
i mean did you do this one too
7a. Get the addons archive downloads.7z from here: https://gofile.io/d/mpDnsO
oh yeah i downloaded the downloads.7z file then followed the rest of the steps, right now i'm just running the update from the launcher and it seems to be working
actually you wait for it to finish
Well I ran install/update once then it finished but I only said 194 mods. So i'm running it again
well let see i guess it just error
for me i leave the installation finish itself and dont something in background so it doesnt interfer
sorry bad english
well, you can just bind it to a useless key and call that an "unbind"
very good install practice π
make sure you arent blocked on moddb.com (if no huge red screen in the website then all ok)
This is a normal amount of red?
yup, you are not blocked
good luck to you 

guys how can i disable the modes that i enabled
i just enabled them all
and i want to undo
i have 425 modes right now
Hi, I did a clean install of both anomaly and gamma, and when I try to start the first game I get this error
!default β¬οΈ
To bring your mod list, settings and keybinds back to default, inverting any changes made by you:
1) Open the Launcher with admin rights
2) Uncheck every box
3) Click on Install / Update G.A.M.M.A
Note: If you wish to keep your keybinds and graphical settings, go to Anomaly\appdata and backup user.ltx.
!disabled // @dry marsh be sure to know what you are doing, you cant just enable/disable any mods if you dont know what you are doing. you will break the game if you do that β¬οΈ
Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #π€bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #π¨base-gamma-support, use #π¨modded-gamma-support instead.
thanks bro β€οΈ
hey guys, i was wondering if there was a way to change how much the barrel durability affects the gun's damage? and also if there was a way to change how many charges the weapon repair kits have? did a quick search on here and couldnt seem to find anything. sorry if this is the wrong channel, not sure if this counts as more technical or gameplay
try asking #βπmods-making-discussion if no answers here
sure thing, thanks
Can somebody tell me which mod is this so I can maybe reinstall it
Open GAMMA launcher as admin
check "force zip extraction" and "check md5" only
run update to verify all mod files again
only those two?
yup
happened while updating my game. will this cause problems? and if so how do i resolve them
!largefiles // after the installation is complete, do this β¬οΈ
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
gamma_large_files_v2.zip
gamma_large_files_v2.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/Grokitach/gamma_large_files_v2
2.1.) or from the mirror
https://mega.nz/file/IVEHCRIY#JahXdS5zwC3qp7vX_5mlUQ2MVo1S7pSqEr-BP1IPV5I
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
gamma_large_files_v2.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
gamma_large_files_v2-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Disable:
"Force Git Download"
"Update Large Files"
8.) ClickInstall / Update G.A.M.M.A.
thank you
Small question, couldn't find it nowhere , how do i disable the small animation after i skin a mutant ?
i think if you press ] you'll disable item animations and that will do it. could be wrong tho
I can't help but think I've done something wrong
Is it still meant to download a ton of mods even after you extract the "downloads.zip" folder to the gamma folder?
Is it meant to look like this?
double check that the downloads folder in the gamma main folder is full of .zips and not a nested downloads folder?
ohh all the zips at the bottom of the pic need to go into the downloads folder i think
Its downloading them to the downloads folder in G:\Gamma\downloads
It just states in #π₯οΈhow-to-install "5. Using 7Zip, extract downloads.7z into C:/GAMMA/ and replace any files if asked to."
And I knew that felt wrong, but it hasn't been changed
yea those zips arent in the right place
Wouldn't that disable all animations ? If so , what animations will be disabled aswell?

Thankyou
no worries, good luck. this is what my folder looks like and its running, so make sure you dont move pythoncore zip with all the others
Is there any chance someone can fix 5. in #π₯οΈhow-to-install ?
That was a bit costly for time and download data
@brisk zinc
Nothing to fix there
So you're meant to extract the mods directly into the gamma directory? not into the gamma/downloads folder?
You have 2 ways to extract the files.
- Open the zip file, go inside the downloads folder, select all the files in there and drag & drop them into gamma/downloads folder
Or 2.
Move the downloads.zip into the gamma folder, right click on it, extract here.
It will extract with the folder thats called downloads
So after that, the downloads folder should be filled with required mods
Ahhhhh, I see now
Yes, I did the dumb and just drag/dropped them into the gamma folder
Or as instructions say, just right click on the file, extract it to the gamma folder, and it should replace the existing folder with the one that has mods in them

tbh idk anything else other than how to disable item animations and that skinning animations were disabled as a result. I think some other animations were also gone (like cooking) but i dont remember the details and i cant check them rn
Just in case anyone finds my message about the level transition bug. Searched around on the discord and the consensus is that its simply fucked. I'm gonna have to play with debug on permanently so I can fast travel through the bugged transitions. If anyone finds a solution please DM me lol
After one of last updates game cannot load p90 tactical but still gives it to npc. How to fix it?
only other mod i checked on was Blindsides Knife Anims but it was running fine for hours. I closed, tried out a different game i downloaded and went back to GAMMA and 15-20mins in, i got this
Try uninstalling it if you're using MO2. I'm really interested in my p90 problem cuz I can't load and continue to completing game
shit, i really hope you find out the issue then and that its fixable
I understanding what's wrong but I can't find way to fix it. With last update p90 tactical was deleted or broken but game still trying to give it to npc so I need to delete it fully or find model and icons and dump it into addon
its GWP, so probably a hell lot of files are corrupted
so screenshot the MO2 with categories collapsed
you too, screenshot the MO2 i guess
I meant Barry's Knife Anims π but i unchecked it
I can't see what's wrong (pls don't tell me that I have to reinstall all mod pack again)
And why files could be corrupted I used installer from here
!screen
We can't really see the problem if you take a picture with your cellphone. If you have a problem you want to share with us, you can do the following, since we don't care about your second monitor or your desktop image:
- Press F12 in-game, look in
Anomaly\appdata\screenshots. If it's not there, look in your GAMMA RC3 folder, inside a folder calledoverwrite - Press PRTSC (Print Screen on your keyboard) open Paint, CTLR + V to paste the pic, save it, send it
- Windows key + Shift + S, which let you choose what part of the screen you want to copy, it will directly copy the pic for you.
photo it with a go pro or idk
much better
what mods did you disable
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
thats mean i have to reinstall everything again?
no, 
Can anyone help me with this? I have different problems every time I reinstall the mods
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
this literally is in the message
Ok ill try now
!full yep, you do this too
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
Which options I should enable to reinstall SSS like it was at default?
I got bug with auto enabling depth of view, so decided to reinstall
!default its really would be better that you would bring back everything to default
To bring your mod list, settings and keybinds back to default, inverting any changes made by you:
1) Open the Launcher with admin rights
2) Uncheck every box
3) Click on Install / Update G.A.M.M.A
Note: If you wish to keep your keybinds and graphical settings, go to Anomaly\appdata and backup user.ltx.
Noted, I will do this now
Should I backup my saves?
no, this will not delete your saves
umm, ok
Now this happens
is there a way to disable depth of field? i cant see anything while reloading. Disabling it in the options makes it turn on again for some reason
!largefiles now do this and make sure to use the mirror
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
gamma_large_files_v2.zip
gamma_large_files_v2.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/Grokitach/gamma_large_files_v2
2.1.) or from the mirror
https://mega.nz/file/IVEHCRIY#JahXdS5zwC3qp7vX_5mlUQ2MVo1S7pSqEr-BP1IPV5I
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
gamma_large_files_v2.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
gamma_large_files_v2-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Disable:
"Force Git Download"
"Update Large Files"
8.) ClickInstall / Update G.A.M.M.A.
!dof
Follow this: #βπfaq message
found it many thanks for your help
go read #β©start-confirm
not sure if its for here but if I enable mags redux can I add it to an existing save and purchase mags from traders or do I need to start a fresh save?
Looks like it helped, thanks
I hope I won't need any help with that
guys need help, any idea how to fix this error ?
how to enable the option to buy equipment from traders?
!surgecrash
If you crash with this error during an emission: surge_manager_ignore_npc
1) Open your mod list
2) Find 265- NPCs Die in Emissions for Real
3) Right click on it, click Reinstall, pick all 3 options and then Replace
!vanilla
If you want to be able to buy and sell guns/armors again: #βπfaq message
!mags yep, you can use an existing save
How to properly turn it on: #βπfaq message
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
ok thx imma try this
i got this problem what is it?
do you know?
Maybe something with RAM. I had that error message but that happened only around 2 times and havent repeat and not in stalker
the crash just never stops for me
is it a pre 0.9 save?
screenshot the MO2 then
were there any errors in the cmd-like console?
it starts with a launcher
!1080 looks good, try this then
Tick "Pre 0.9 Save Fix" addon in MO2.
Note: if this doesn't work, you will have to start a new game.
dont look at the name of the mod
i asked about that the other guy, not you
so, it works now?
it's blank for some reason
nothing
thats strange.. your windows defender, firewall and things like these are turned off, right?
how to fix nvg please
yes it's all turned off. On my first installation there were errors in the cmd but now there's nothing
i've been trying to get this mod to work for 2 days now
maybe lol we will see thanks
nooooo... again
thats the second time today never had this problem in general
then rip this save
turn off the fix and start a new game
is there any way to edit the config files to customize mods further? for example customizing the repair system where you dont need an army rifle repair kit to replace a barrel
this might be the wrong channel for this π
Hello guys. I jumped on the hype train for 0.9 and did a clean install over my Anomaly. I started a new game and everything worked fine until I shot my first bandit. CTD with this error:
Expression : <no expression>
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 1101
Description : fatal error
Arguments : Can't open section 'actors\stalker_bandit\stalker_bandit_berill_nohelm_1'. Please attach [*.ini_log] file to your bug report
Thx for help. Updating finished and game fixed fully.
I figured it this happened because I disabled the ballistic overhaul mod
guys hello first time installing the modpack I downloaded the 13-14 gigabytes of downloads files yesterday but still the launcher downloads the addons once again anyway to skip this?
any help for fix my nvg ?
ok figured it out just moved downloads file to launcher
any clue how or why this blur got enabled?
Just had a real weird crash that I tried to replicate and couldn't. Everything seems fine now, but I'm still very curious if anyone knows what caused this?
Maybe dof? Check the SSS mod in the MCM menu and turn all the dof sliders down, see if that fixes it.
Hello all, today i download and install GAMMA, run it and the names of all the stalkers look something like this. Anomaly's Name Update for Stalkers is installed.
first time seeing this. popped up after updating my game
Hey guys i have that Error when i load "Wild Territory" 
!1080
Tick "Pre 0.9 Save Fix" addon in MO2.
Note: if this doesn't work, you will have to start a new game.
its working!
π
It shows this when the game loads
Is there any way to cancel this guiding task?
It's stopping me from doing any other guide missions, I brought the guy here already but the quest wouldn't complete. So I just tried splitting with him to see if the task would go away but it didn't. I've tried searching for the task ID but I can't find this task in the files. The guy isn't around anymore either so can't try killing him or anything
I start a new game and this pops up. What to do?
!152 // update Anomaly
You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the launcher with admin rights
- Uncheck every box in the Launcher
- Click on
Install / Update G.A.M.M.A.
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
- Find Gamma stealth crash fix in MO2 using the search bar
- Right click > Open in Explorer
- Delete everything inside the mod's folder
Then do the next steps from the bot message below
!definition
1.) Download the file from GitHub, by pressing the Green "Code"button>Download zip.
https://github.com/Grokitach/Stalker_GAMMA
2.) Deleteversion.txtfile inGAMMA RC3\.Grokβs Modpack Installer
3.) OpenStalker_GAMMA-main.zipusing 7-zip then open the folder inside of it
4.) Select the 4 files that are shown in the picture below, and drag & drop them intoGAMMA RC3\.Grokβs Modpack Installer
5.) RenameG.A.M.M.A_definition_version.txttoversion.txt
6.) Run the Launcher as administrator
7.) Disable
"Force git download"
"Update Large Files"
8.) Press Install / Update G.A.M.M.A.
||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://media.discordapp.net/attachments/1098945649929617478/1102522975653199892/image.png
thank you so muchhh it works now after 2 days
one more thing, is there a way to change the font color
!blackfont
Disable Tactical Fonts in MO2 (ModOrganizer)
I'm so done
what with it
did you disable ssometin
All I disable was this. I tried reenabling it still crash
This has the x cross that's y I disabled it
!largefiles // first do this. THEN i can give you the shader fix. and yes, it's because atmospherics never installed properly, along with other mods.
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
gamma_large_files_v2.zip
gamma_large_files_v2.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/Grokitach/gamma_large_files_v2
2.1.) or from the mirror
https://mega.nz/file/IVEHCRIY#JahXdS5zwC3qp7vX_5mlUQ2MVo1S7pSqEr-BP1IPV5I
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
gamma_large_files_v2.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
gamma_large_files_v2-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Disable:
"Force Git Download"
"Update Large Files"
8.) ClickInstall / Update G.A.M.M.A.
you need to disable 188 and 190 to work
no jfc
the files never installed properly in the first place. that is the issue
stop randomly disabling shit
and stop telling people to randomly disable shit
nah man it doesnt work if the 290 are not check
I tried this method, didn't work
I'll try this now
I just want to play the game that's all I've been installing it for 2 days
!x // you can start by telling me how many files have a red β next to them in Mo2
Do you see any flagged mods in MO2? Like this:_ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _https://cdn.discordapp.com/attachments/230197229518979072/1098649636736073878/image.png
11
!full // ok. every mod with that red β = corrupted or failed to install properly. we are going to start by running another full install, please read the steps below
1. Open your G.A.M.M.A. Launcher as admin
2. Enable the top 4 boxes under the installation buttons, make sure they're selected
3. Click "Install / Update G.A.M.M.A." and wait for the install process to be done
4. Open your MO2 and check if you have any red crosses, make also sure that you have #π577-mods-in-mo2
This procedure does NOT remove saves, you're NOT going to redownload everything from scratch and it WON'T delete your progress, your save is... safe.
The launcher will simply check every mod in the pack, reinstall/fix them if you have red crosses and any mod that need to be updated, will be updated, that's it, nothing else.
In case you want to save your in-game or MCM settings (because the launcher will revert them back to default), type !backup in #π€bot-commands.
after that finishes we are going to clean up any remaining mods with a red β
Gotcha, I'll start now
hello, i load in and it workes smoothly, but i have serious screen tearing, is there a specific mod maybe doing it?

Screen tearing is not a mod depended
Thats why V-sync was created
Or limit fps to your monitor's refresh rate
When I start a new game from the Stalker Gamma launcher in gamma, when it "loads" the game just crashes
Is it normal for this file to take a long time downloading? I have a good internet connection
When i play every menu/text are written on black so its rly hard to see something ^^'
!blackfont β¬οΈ
Disable Tactical Fonts in MO2 (ModOrganizer)
i cant disable depth of field, i click save and it just resets to on again
!dof
Follow this: #βπfaq message
and u have something about the health hud bugued?
!busyhands One of the indicators of the busy hands bug. You need to reload a previous save.
Read this: #βπfaq message
How much does file weigh "Atmospherics GAMMA 1.84"?
That one is served up by ModDB so perhaps they are giving it to you on a slow mirror. π€·ββοΈ
!busyfix β¬οΈ
Try to keep calling pins to #π€bot-commands unless you are helping someone else.
ho okay sorry ^^'
help pls
What is the mod under Gunplay that has the red X next to it?
!screen Dude why did you give a proper screenshot the first time and then a picture with a phone the second time that doesn't even show what I asked for? Need to know what mod has the red X
We can't really see the problem if you take a picture with your cellphone. If you have a problem you want to share with us, you can do the following, since we don't care about your second monitor or your desktop image:
- Press F12 in-game, look in
Anomaly\appdata\screenshots. If it's not there, look in your GAMMA RC3 folder, inside a folder calledoverwrite - Press PRTSC (Print Screen on your keyboard) open Paint, CTLR + V to paste the pic, save it, send it
- Windows key + Shift + S, which let you choose what part of the screen you want to copy, it will directly copy the pic for you.
Use option number 3
the unhighlited one
bas scopes
what should i do
Right click on it > visit moddb > download it
Then follow the instructions from a bot
!manual
To manually reinstall problematic mods do this:
- Go to the link the Helper has provided above (or below).
- Download the mod file(s) from moddb. DO NOT EXTRACT.
- Place them into your GAMMA\downloads folder. Overwrite if needed.
- Run the GAMMA Launcher as admin. Make sure only βForce zip extractionβ is enabled.
- Click "Install / Update G.A.M.M.A.β
Probably, doing the way i said would guarantee you'd reach the right mod page
those ones should be on moddb
Are Large Files the only ones that are downloaded outside of ModDB?
it can because it's up to moddb servers
and github mods
im having an issue with downlaoding the anomaly-1.5.1.27z file
So would best practice for a mod with a red X be to fetch it from its source and run the installer with everything unchecked except force zip extraction? Just trying to learn to help others.
!torrent // you can try the torrent mirror
You'll need a torrent client, I suggest qbittorrent https://www.qbittorrent.org/
Once downloaded and installed, open it and go to File > Add torrent link⦠and copy paste the torrent links in the text box
This is the official torrent for Anomaly 1.5.1:
magnet:?xt=urn:btih:c307c208636d1fd98ca4fe70ca0c692035659855&dn=Anomaly-1.5.1.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce
This is the official torrent for Anomaly update 1.5.2:
magnet:?xt=urn:btih:06580e9c871086d5b847a84940bd89b6d97c975f&dn=Anomaly-1.5.1-to-1.5.2-Update.7z&tr=udp://tracker.opentrackr.org:1337/announce&tr=udp://bt1.archive.org:6969/announce&tr=udp://bt2.archive.org:6969/announce&tr=udp://tracker.torrent.eu.org:451/announce
i tried that and still the same issue
i deleted it and i am redownloading it would that have anything to do with my problem?
generally, yes
except if that mod is from github and not moddb then you can run the update with just "check md5" and "force zip extraction"
i had actualy a keybind to reload this hud its h for me
Yes but when your health hud doesn't work it is generally the busyhands bug. Glad you got it sorted. BHS hud is 'H' and the rest of the hud elements are 'numpad enter'.
but actualy it work ^^
if you use H to refresh it and it doesn't show your actual health and it doesn't update it properly then you can be worried
Also head to #β©start-confirm
Its always a good day when busyhands doesn't rear its ugly head.
Can you tell me what to do after I finished installing? Cuz it'll take a while and you might not be on by then.
if you finish it without seeing any error in the black window, then you should have the complete mod pack
any way for the game to save to documents?
Also, after reinstalling, make sure all those red X's that you had are gone.
Noted.
Game saves are housed in Anomaly/appdata. You can easily pin that folder or create a shortcut if you need to access it.
i lost my last saves to a drive failure, is there a way to copy/paste or save to documents so one drive can backup it
found A bot command for this
Why does MODDB severely slow down mod downloads? Well, it's a bit long to install at 90 KB/s
Idk, ask moddb
well once it's done, close and reopen MO2, do you have red β next to mods still
that's not super helpful in this instance although i know what you are getting at. you can't "make sure" the red β are gone - they simply tell you when a mod has failed to install properly, usually because of an error in downloading. it's therefore more helpful to ask the person to report if they still have red β after performing a full install, and which mods have it (so you can see which mods to tell them to download)
no more red cross but still crash after starting new game
!definition // ok now that bug comes from one of the GAMMA specific mods, so doing this reinstalls all of them
1.) Download the file from GitHub, by pressing the Green "Code"button>Download zip.
https://github.com/Grokitach/Stalker_GAMMA
2.) Deleteversion.txtfile inGAMMA RC3\.Grokβs Modpack Installer
3.) OpenStalker_GAMMA-main.zipusing 7-zip then open the folder inside of it
4.) Select the 4 files that are shown in the picture below, and drag & drop them intoGAMMA RC3\.Grokβs Modpack Installer
5.) RenameG.A.M.M.A_definition_version.txttoversion.txt
6.) Run the Launcher as administrator
7.) Disable
"Force git download"
"Update Large Files"
8.) Press Install / Update G.A.M.M.A.
||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://media.discordapp.net/attachments/1098945649929617478/1102522975653199892/image.png
FINALLY EVERYTHING IS WORKING PERFECTLY THANK YOU SO MUCH FOR HELPING

good to hear! now head to #β©start-confirm and remove your newcomer tag because your game works!
I was really hoping for monkey patches 
i was almost expecting a k98 lol
my game just started crashing a lot, I don't really see a reason for it to, before it didn't, and I didn't install any additional mods
Please help, this happened after I updated GAMMA in the launcher
!x any red β in MO2?
Do you see any flagged mods in MO2? Like this:_ _||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _https://cdn.discordapp.com/attachments/230197229518979072/1098649636736073878/image.png
!atmos // ok, great, follow the steps below pls
1.) Go to your
GAMMA\downloadsfolder and deleteAtmospherics_GAMMA_x.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/hippos-shaders-and-atmospherics
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck every box, but leave "Force zip extraction" box checked
6.) Click install / update G.A.M.M.A.
That view is a lie
Mods and categories are separated 
Hey guys, im having a little problem. After installing everything when i try to launch the game. It crashes and makes a windows sound. No message or anything else like that. It doesnt even open. It crashes on the splash.
I used this guys guide: https://www.youtube.com/watch?v=vuzr9cmoiTQ and did everything that he did
Hello fellow Zone Explorers! Welcome back to another video, in today's video I do a step by step guide on how to install the STALKER GAMMA Modpack for STALKER Anomaly. Read on and find the links you may need! If you're new here, please hit that subscribe button as it helps me out tremendously, and if the video helped you, leave a like to let me ...
Just from looking at it, I can 95% say it's outdated
!k98 // FYI we've had some people used that video before that had problem
1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these four folders (check pic)
3) Go to your Anomaly folder
4) Paste these four folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference:||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _
https://cdn.discordapp.com/attachments/1098945649929617478/1110295790104092753/tk98.jpg
Yeah i thought it might be too
Up to date: fucking thing is 7 months old

God damn
STOP USING YOUTUBE GUIDES
the only youtube guide that is up to date and describe the install process well is the one from the15minutegamer
but if you cross-reference that video above and #π₯οΈhow-to-install you might find some stuff that are off
this fixed it
Thanks guys! I thought i was gonna have to reinstall everything and with 380kb/s download speeds on moddb i was really dreading that idea. But yeah now it launched just fine.
@north gazelle head to #β©start-confirm if you can play without issue 
So why is my game crashing
Good afternoon.
I am trying to download GAMMA from Gofile and there is no case, I tried with all the files and it does not allow me to download.
However, with the mobile data of my cell phone, it allows me to download.
Any solution?
In the miracle machine area
so, if i turn on Fluid Factions, do i still need to turn on the Base Game "Dynamic Factions" setting?
is gofile down?
!mirror
GAMMA RC3:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
https://drive.google.com/file/d/1vfp80gw7p7lOMitlYGoVAogFABYJCc2g/view?usp=share_link
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/1IdGBA6B#3AAf5EB8Wh3fDvHB1I9bQ1UZp1bWMkc_Q074zF9vqO0
download.7z:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
https://drive.google.com/file/d/12C2YLKmFRMLOysff7F5-L9Rv5ySb3ziX/view?usp=share_link
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/5Qd3SBDI#C7TmacRLY-YQ_X9AhrBJ75FpxZv2EUPN2Jj_ziXxlK8
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 3:
torrent: #π¨ΠΏΠΎΠ΄Π΄Π΅ΡΠΆΠΊΠ°-ΡΡΠ°Π½Π΄Π°ΡΡ-gamma-ru-ua message
G.A.M.M.A. Launcher:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
#π¨base-gamma-support message
#π¨ΠΏΠΎΠ΄Π΄Π΅ΡΠΆΠΊΠ°-ΡΡΠ°Π½Π΄Π°ΡΡ-gamma-ru-ua message
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/lcdEiQqD#lzXBbyjrTBNjx4Hge2Ph7LB5L5DtzSIj5jCcNT8_x-o
@mint crescent ^
Thanks
any specific fatal error?
where do i ask this question?? (so, if i turn on Fluid Factions, do i still need to turn on the Base Game "Dynamic Factions" setting?)
probably don't need to but FYI warfare mode is unstable for GAMMA
Duley noted, thanks for the reply π
Apparently you can use this without warfare mode. Let me check the codes and see if this mod enable dynamic factions by default (it didn't mentioned it in the description page so I figured it just overwrites whatever settings is on by default)
in the Troubleshooting section it mentions that your FOV slider might change rarely, for me every time I die FOV goes to 40.97. Any ideas why?
!dof
Follow this: #βπfaq message
also #β©start-confirm @light lotus
Hello!
i would like some help
when installing gamma i turned on gardeners of the zone and dead bushes mod but the trees still look alive and stuff
No it just crashes just straight to mo2
any way to fix this? cause i really like the original gamma dead look
that's not how you change the grass/tree settings atm, reinstall this mod in MO2 (right click)
289- Grass Tweaks (reinstall for different options) - Aydin
and choose the winter or fall option
r2_dof_enable off
that did the trick, thanks
Ok seeing Right now
also that doesn't seem to do anything:S
read the page lol
Thanks!
yes, and it neither adds/removes roles or channels:s
just click on the turtle icon and it will update your role, maybe there might be a delay
you can enable Dynamic Factions, wasn't sure if the code from Fluid Relations force enable it so doesn't hurt to turn it on
Hello
No
Is this normal?
No
Do I have to reinstall the whole addon again?
Click all options, except for shaders and run the launcher again. ALSO RUN IT IN ADMIN
If it doesn't fix, moddb bot might very have blocked you
Oh okay, I'll try
Pls run it in admin
Actually installs everything properly
That's all you need to know
ahh ok
Unless you're blocked by moddb bot
Which then Nothing will work
I had something from github that didn't download. Do you think that's the case?
Just do the launcher please
Ahh, okay
Still looking for a solution for this. I've tried a bunch of things so far, it doesn't seem like this has a task_id like other tasks because it is a mod that makes these tasks (guide tasks fix). I even tried going into the script file and adding a clear() function to a random spot to try and trigger the mission to clear but that doesn't seem to work
this right?
so I've seen a few things saying you can chop wood with an axe. am i being trolled? i dont see any way to chop wood lol
Yes
So I'm being trolled? xD
Think, right click on the axe
Time to wait
Did you tick every option except for the last one?
To be fair I'm only testing on the trees inside of Rostok...maybe theyre protected
ye
I think you just right click on the axe and thats it. I've never used the axe before so I ain't fully sure
Although this is more of a #βπ°β’newbies-chat question @lusty dove
maybe ill test it on another non-iron-man run xD
As this is a game play question
ahh okay sorry π
Hdd moment
My gamma install just crashes, no warning, no log in the files, no error messages. The mod list is default, I have updated to the newest version but it didn't fix anything.
can anyone help
I think it'll be great if showed ur mo2 list too.
How did u got the 2 more mods? I think mod should help ya lol
oh wait nvm, they didn't updated it
hey guys, I havent played gamma in about a year because my last save kept crashing. could someone help me update it so I can start a new game?
so any ideas what might be causing the problem?
when
wdym when?
When is your game crashing? Right on startup?
during gameplay randomly
and i have to add i was able to play fine for about 100 hours before the problem occured
now it just crashes every time after around 10 mins
!crash then send a crashlog. Its normal for a modpack that big to crash occasionally, if its not very frequent i wouldn't bother
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #π€bot-commands if you're using this command in this channel. You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs
This is what you could find:
- xray_yournamehere.txt
- xray_yournamehere.log
- xray_yournamehere without any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end. DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #π¨modded-gamma-support.
it has become unplayable at this point
oh, alr, 10 minutes is in fact too much
very helpful, thx for nothing
this right?
You need to send the log right after the crash
Greetings! Lately have this error, what it can be?
!1080
Tick "Pre 0.9 Save Fix" addon in MO2.
Note: if this doesn't work, you will have to start a new game.
Try disabling this setting in Dialogs Dynamic UI:
Hello! Anyone able to help with this?
Try disabling this setting in Dialogs Dynamic UI mod:
!152
You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the launcher with admin rights
- Uncheck every box in the Launcher
- Click on
Install / Update G.A.M.M.A.
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _ https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
This was literally asked 6 days ago and the guy already left the server

ok now it crashed my whole pc
Finally figured this out. If anyone goes crazy searching for a fix for guide tasks well here's the fix
Enable Debug mode (check #βπfaq pins)
Press F7
Go to NPC logic/execute
Type in to function execute "tasks_guide.clear()" without the parenthesis
Execute it
Task should no longer show up. Not sure if this will let me accept other guide missions yet, haven't tested that yet.
ok here is the log
!task One exists. Thanks for reporting back with a fix though!
Having problems with a certain task? #βπfaq message
Read through the rest of my messages. It doesn't mention anything about the guide tasks in there
Guide tasks work differently than normal tasks
I can see that now. Perhaps yours can be added to that pin. I initially missed the guide part of that command.
yeah I went crazy all last night and today trying to figure out how to cancel that task lol idk what happened it bugged out and I wasn't able to complete it or accept any new guide tasks
I'm not an expert but only suspicious thing i can see there is "DX10" because i I'm launching in dx11 mode
Random crash
Did a small window pop up when you crashed?
In the future it helps to 'respond' to the person telling you to post crash logs. That way they get a ping when you have replied to them for support. I don't see anything myself but I'm just learning the ropes.
@tender forge would this be fit to add to !task?
i sent the log
Idk
@sharp bough what you think?
if you are talking to me, no, as is said, the game just closes without anything, last time it even turned my whole PC off
So you said you crash consistantly after about 10 minutes of gameplay. Are there no visible errors every time?

One time i got an error message but i didn;t think to save it
I mean, that's just reads as clearing ALL ACTIVE guide tasks
don't think so, only crashing in one game while others are fine looks like a game issue
Not just the one that's bugged out
I think you can only have one guide quest active at a time
It wouldn't let me accept any others
Not to a point where your entire pc shuts down
It didn;t shut down, it froze on a black screen to be exact
We're you not able to clear it using!task instructions?
i misphrased it
No because normal tasks work differently than guide tasks. Guide tasks appear to be fully withheld within the script for the mod. It saves the status to your save file
So 2 choices really then.
- Launch the gamma launcher and run the install / update.
Or - Reinstall everything
Because if it crashes after 10 minutes with no useful crash info, then either something didn't install correctly, or everything didn't.
Might be also a good idea to install it on a different drive
Basically the way guide quests work is you accept a guide quest, it goes through the script. Script saves your current guide task status to your save file. When you reload the game it re-runs the guide task script to check the status. Only one can be accepted at a time from what I can tell.
It's on an almost brand new SSD, chances of it breaking are very low
And yet never 0
They don't rely on the st_quests files at all
true, imma scan with hdtune
I can't check now, but are you sure you can only have 1 guide task active?
I'm pretty sure. While that quest was stuck active if I ever found another npc wanting a guide it only gave the option of "nevermind"
hello funny people, i've tried a few things to fix this, none of which have worked, so im coming for the wisdom of the elders.
Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
Function : CRender::texture_load
File : ..\xrRenderDX10\dx10Texture.cpp
Line : 535
Description : The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.
Arguments : c:/anomaly\gamedata\textures\veh\veh_lorry_2_bump#.dds
stack trace:
maybe there wasn't anything in the crash log because it crashed my whole PC, ill see if there will be anyything useful in there on a "normal" crash
Nah, if there was a stacktrace, it crashed properly
What happens if I press by mistake this button?
Ok. Then go read #β©start-confirm cuz you missed that part.
@tender forge add that to the command, just make sure that it says that that command is specifically for guide quests. And maybe add instructions to talk to the people you're guiding because you end the quest through the dialogue tree and not by getting them to the destination

Write it to falco, it's his message there in the faq 
Does anybody knows?
Have done a fresh full install as recommended and still getting this error when trying to load into the game from any save. Have also updated NET Framework as well as manually assigning virtual memory size. This one sure is puzzling. Using original 380 mods on modlist.
Oh damn, done! There should be a way to force completion of the guide quests too rather than just canceling them. Using the Complete() function. But it requires two values which I would need to look a bit more into to figure out
Or i might do it tbh, but a bit later
!1080 try enabling this mod, see what happens
Tick "Pre 0.9 Save Fix" addon in MO2.
Note: if this doesn't work, you will have to start a new game.
Will give it a try mate
If you figure it out,
someone or me and we'll see if it really works
What happens if I press by mistake this button in the launcher menu?
anyway thx for help S5yn3T
Dunno, probably nothing bad if your game is already set up
welp I am tryna get my hands on the launcher (step 7) but the links on file0 doesnt work? Do you know why or how I can solve that?
!mirrorru
GAMMA RC3:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
https://drive.google.com/file/d/1vfp80gw7p7lOMitlYGoVAogFABYJCc2g/view?usp=share_link
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/1IdGBA6B#3AAf5EB8Wh3fDvHB1I9bQ1UZp1bWMkc_Q074zF9vqO0
download.7z:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
https://drive.google.com/file/d/12C2YLKmFRMLOysff7F5-L9Rv5ySb3ziX/view?usp=share_link
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/5Qd3SBDI#C7TmacRLY-YQ_X9AhrBJ75FpxZv2EUPN2Jj_ziXxlK8
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 3:
torrent: #π¨ΠΏΠΎΠ΄Π΄Π΅ΡΠΆΠΊΠ°-ΡΡΠ°Π½Π΄Π°ΡΡ-gamma-ru-ua message
G.A.M.M.A. Launcher:
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 1:
#π¨base-gamma-support message
#π¨ΠΏΠΎΠ΄Π΄Π΅ΡΠΆΠΊΠ°-ΡΡΠ°Π½Π΄Π°ΡΡ-gamma-ru-ua message
Mirror / ΠΠ΅ΡΠΊΠ°Π»ΠΎ 2:
https://mega.nz/file/lcdEiQqD#lzXBbyjrTBNjx4Hge2Ph7LB5L5DtzSIj5jCcNT8_x-o
thanks

@tender forge I checked 0.9 pre save fix and am still getting that same memory error. Lol god damnit it was working great before this
@willow hawk you may know the answer, if it does something bad it shouldn't be green I think π
So you can't even start a new game?
let me try starting a fresh game
Not important
Perfect then
Ah yeah a new game boots up and I can spawn and walk around just fine. So is my most recent save corrupted or would it just say that straight up?
Yep, your old save is indeed dead now
Alright guys Im just gonna go fuck myself hearing that news
Thank you for the help actually though
Also visit #β©start-confirm
I'm gonna try some of my older saves I guess to see if it will maybe work but its gonna be a lot easier after learning the game in this 1st playthrough, thanks fellas
I'll check it out sir
Ok, so I updated the game, my gpu drivers, made sure i had no overclocks on anything and after 10 minutes the game hasn't crashed yet, we will se how it goes.
@tender forge @sharp bough Lmao I just tried my 2nd most recent save and it worked just fine. Jesus christ why didn't I just try that before. Apparently only my most recent save was corrupt so I don't have to start over
Iβm trying to clear a check point and when I kill the technician I get this error
Unless it crashes on the transition 
Well maybe don't kill the technician?
Technicians can't fight anyway
Ehhhhhhh, it's still beter to start a new game, cuz all you did was confirm that your save is a ticking time bomb
Soo... Y'know...
I'm blowing up with the ship then
Itβs an enemy and he attacks me
I had something like that happen to me a few months ago on my first playthrough, but the save worked fine afterwards and i finished the game, so he might be just fine.
Still, a ticking time bomb
Btw, 20 minutes later and you still haven't crashed.
Guess it works fine now.
Now go to #β©start-confirm
It's a known but unfixable bug with techicians. You can keep trying and it might not crash one of these times according to my experience. Or just don't clear that base out.
does anyone know how to fix this? Im in Zaton and it keeps crashing every time it gets dark, every time i shoot a very specific Mercenary, and when i try to exit the area. it never showed the error until right now and it's getting flustrating
Lmao yeah I finally went from my shitty shotgun to an AUG so I'm not going back to the poor days just yet
But poor days are where its most fun
Uf, thank you
Got my hands on m700 and i despise this rifle 
Haha yeah I can agree the whole game looks fun buts its my first playthrough so I gotta play with the shiny toys
No seriously, the gun has bs damage.
You'd think a headshot would kill an enemy
Yet it downs them for some reason
Headshot does nothing when you shoot a brain dead person 
yeah... spoke to soon
mod disabled is limited fast travel
i have a new log file that is 8 times bigger, still no error message, just a windows error sound
if thats needed to be know
You are still running 379 mods and not #π577-mods-in-mo2 ... And I already tried to help ya and I'm out of ideas, go to #π¨modded-gamma-support
Is Meatchunks prefetcher for GAMMA worth using? I have 32GB of RAM and it says its needs 12GB
im not walking 30 minutes so i can collect 2 patches
Yes
Worth it.
Yes, turning stalker into postal 
dude where is it i need it
Prefetches a lot of game assets and loads them in memory so there isn't as much microstuttering when moving through the zone. Requires lots of ram and increases load times.
At the bottom of GAMMA fixes category
now it crashed, from what i can see it says: error 8 not enough memory to process that task
Yeah I still get stuttering and have tried check if stuttering mod so hopefully it helps a little
Ok, so getting obvious out of the way.
How much ram, vram and memory you have left on the drive?
i have like 16 total
16 is not enough
32gb of ram, gtx 1070ti 8gb and about 150gb left on the ssd
jesus fucking christ
new log file if you need it
I don't see how that is MY problem
!memex // only experimental option i have... Otherwise idk, maybe graphical settings are set too high to begin with.
Otherwise idk, xray engine bs that even pc from NASA won't be able to deal with
Experimental fix for "[error][ 8] : Not enough memory resources to process this command."
Only use after trying other common fixes, like running another install in the launcher.
- Go to
\Anomaly\appdataand openuser.ltxwith a text editor.- Search for
snd_cache_sizeandsnd_targetsthen reduce their value from256to128- Launch the game and open the settings.
- Click
VisualthenAdvanced.- Slightly reduce
Texture detailandObject detail.
I have very similar specs on one of my laptops and it struggles to run gamma at default graphical settings. You should also enable triple buffering for your chosen stalker exe in the NVIDIA Control Panel. IT helps immensely. Perhaps your overtaxing your rig.
how can i enable that buffering thing?
what would you do
disable the fast travel limiter or walk 30 minutes to collect 2 patchess from clear sky swamp to limansk
You have been in here for a long time with numerous problems. Have you tried just scrapping it all and starting from scratch again?
I'd leave the 2 fucking patches

i did
i need the rep
Completely? even redownloading anomaly?
i have 70-80fps average on default settings
yes
you'll get it eventually
alright homie
Yes, but xray engine is that special... That on some rigs the default settings just don't work
whats xray engine

the game engine that STALKER runs on
a see throu car


dude no fricken way
you still messing with the guide quest?
I'm not sure what calls the complete function so I'm not sure what first_speaker and second_speaker should be
can you get me a screenshot of the quest text in the PDA? I need it for formatting
Greetings
Just did a fresh gamma install and I'm obviously missing something. No "red X" in MO.
Suspecting 312 or 314, as those gave me trouble before
how to enable 4K mode in the game on TV and how to remove the window cursor in the game?
!gunslinger
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
S.T.A.L.K.E.R.-Anomaly-Gunslinger.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/TeivazCZ/S.T.A.L.K.E.R.-Anomaly-Gunslinger
2.1) Or from the mirror
https://mega.nz/file/hd9wXCLT#z7zA5PLazcKa3z2GyZLyjOCy9zAgrKrR9Pw1gj9dxMg
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
S.T.A.L.K.E.R.-Anomaly-Gunslinger-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Uncheck all boxes except:
Force zip extraction
8.) ClickInstall / Update G.A.M.M.A.
missing file is specifically from gunslinger
Oh hi! Full install with the new launcher worked wonders π thanks!
Is there any way I can drop the Gunslinger files directly into GAMMA\mods\312 (...) ? I'd appreciate if I could skip the lengthy install process this way.
Got a meta.ini and a supposedly broken "gamedata"
if you could, that's how we would have worded the install instructions
One of my earlier posts in here shows a picture of the text on the PDA map. Lemme get it sec
lmao missing gun textures.
just reload save?
to fix what? the missing tex? that requires reinstalling the mod responsible for the texture
the sandbags
my gun textures are fine i think
I found this text in dialogs.script I believe
they're extremely not fine
nah wasnt that file. And it doesn't show in the task list
Guide missions I don't believe show up in the task list
seriously go ask #βπ°β’newbies-chat if that gun looks normal. but that screenshot looks like more texture files from mods never downloaded
Pretty sure they do 
I don't think so
Im pretty sure they do
Again, these guide tasks are made with a mod. They're kinda bruteforced in
Even the mod creator says the script is a mess
A true xray mod developer 
I mean... Can you check? 
I can't find a guide task for the life of me

I could if I wasn't working and if I had a guide task lol
I cleared out that broken one I had
thankfully lmao
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFack
I get off work in about 15 mins
hello, im sorry if im asking in the wrong place but i couldn't find better one
Im trying to install gamma for the first time and there is no error poping up when clicking "first install initialization" in the gamma launcher, exept this in command console
did you run gamma launcher as admin
yes
more seriously sandbag textures are basegame textures, if they're missing/broken = reinstall anomaly
did you put antivirus exception on the entire gamma folder
@sick fractal did you pick the TOZ-34 or PM Makarov or MP5 gun at startup
Makarov
can you run ModOrganizer application straight from GAMMA folder
!gunslinger // follow the steps
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
S.T.A.L.K.E.R.-Anomaly-Gunslinger.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/TeivazCZ/S.T.A.L.K.E.R.-Anomaly-Gunslinger
2.1) Or from the mirror
https://mega.nz/file/hd9wXCLT#z7zA5PLazcKa3z2GyZLyjOCy9zAgrKrR9Pw1gj9dxMg
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
S.T.A.L.K.E.R.-Anomaly-Gunslinger.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
S.T.A.L.K.E.R.-Anomaly-Gunslinger-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Uncheck all boxes except:
Force zip extraction
8.) ClickInstall / Update G.A.M.M.A.
alright thanks,i was asking cus they are FINE forever till i go to a different travel spot then they black out
then that is a shader/lighting issue
as for the guns, you're missing textures on whatever the fuck the blinged out gun is. which gun is it
so that i know which pack provides it. so i can tell you to reinstall it.
i tried that, the correct error poped up, i choosed the anomaly folder for mod organiser and tried again doing initialization in gamma launcher
Holy all of that just beacuse i picked up makarov lol
the gunslinger mod that provides animations didn't install correctly, so go redo it
you don't have to do initialization again
continue installing
sooo yeah shader/lighting issue
ak-74 pmc
pretty sure yea,just reloaded it and it worked normally
lemme show you my ak stock
look again if you think your guns look fine, ignore me
if it's a shader issue the go-to move is deleting the folder Anomaly/appdata/shader_cache
Open your inventory and take a pic of the gun inside the inventory
Is there any mod I can enable or setting to change so that item stats would show numbers and % instead of bars?
Hello. I just reached Jupiter and I was tasked to escort the scientists for some work. Upon returning them to the base, the mission doesn't seem to be complete.
Alright I got to ask, is there some tactic to reduce or remove stutters, like very frequent and hella damn annoying. It's not my pc, it's not framerate struggles. Its literally just pausing stutters anywhere from a moment to a few seconds. I've tried every google search and doing such things as removing CPU 0 and the "Enable this if you stutter" but alas I am stutter city
- installing both game and modpack folders into SSD
- Enable prefetcher if you have 32gb or more ram installed
Alright I will move them both to my SSD after I have made some room. Don't have 32gb of ram yet, but is it worth trying to turn on and see what happens?
Prefetcher requires minimum of 12gb of ram to be available, if you have 16gb kit installed then it's not a good idea to enable it
Yeah got myself 16gb
If you have an nvidia gpu you can enable triple buffering for your chosen gamma exe in the control panel as well. That helped me a lot.
How much does the game take at most? I've got 32gb total
Sorry, the feck a triple buffer lmao
Thats a thing I can do somewhere?
Google how to use nvidia control panel
!stutter Do what he said then reference this for the name of the setting.
- Update G.A.M.M.A. to the latest version (open the launcher with admin rights, click on
Install / Update) - Bring your modlist back to default (type
!defaultin #π€bot-commands) - Enable the "
Turn this on if you stutter" mod in your MO2 (you can found the mod under theG.A.M.M.A. Fixesseparator) - If you have a NVIDIA GPU, you can enable
Triple Bufferingin NVIDIA control panel - Open Anomaly Launcher via MO2 and tick
Prefetch sounds - If you have a beefy GPU, use
Anomaly (DX11)
Thank manies β€οΈ I will report back
Just to check, if I'm moving to my SSD, can I just like copy and paste my stalker anomaly, and stalker gamma folders onto it?
!move
Follow this: #βπfaq message
Damn there is a bot command for everything, maybe I'm just blind lmao, many thank
!move
Follow this: #βπfaq message
Oh I'm an idiot
I always get this error when my companion dies
What does βupdate large filesβ actually do
!DLTXerror

I always get this when ever there is an sr25 any help?
ok so hum I have an issue where when I start the game my screen tells me that it out of range (so black screen). It never happened before. Anybody knows why?
!largefiles
1.) Go to [YOUR GAMMA folder]\downloads and delete the files
gamma_large_files_v2.zip
gamma_large_files_v2.meta(if you have it)
2.) Download the file from GitHub by clicking the green button"Code" > Download zip.
https://github.com/Grokitach/gamma_large_files_v2
2.1.) or from the mirror
https://mega.nz/file/IVEHCRIY#JahXdS5zwC3qp7vX_5mlUQ2MVo1S7pSqEr-BP1IPV5I
DO NOT EXTRACT THE ZIP FOLDER
3.) Make sure the zip file is named:
gamma_large_files_v2.zip
Rename the archive if it has "-main " at the end.
4.) Make sure that the very first folder in the archive is named
gamma_large_files_v2-main
5.) Move the archive to[YOUR GAMMA folder]/Downloads.
6.) Launch the GAMMA Launcher as administrator.
7.) Disable:
"Force Git Download"
"Update Large Files"
8.) ClickInstall / Update G.A.M.M.A.
!blackscreen
Follow this: #βπfaq message
So I managed to loot a NPCs PDA, I got i decoded by a technician. But when I try to view it I just get my normal PDA (doesn't matter if it's equipped or not). Usually there was only one tab with a couple of messages. But it seems like it keep defaulting to my PDA. Or was it changed? I haven't played gamma for some time and seems like it got couole big updates
when can you guys get around to my ticket?
There's no problem
welp now I was able to launch and see the game but hum this is what happened when I pressed start after the character creation thing
Has anyone found a fix for hud_fov and mouse_sens resetting to defaults (0.65 and 0.071)? I've tried disabling Free Zoom and setting Anomaly\appdata\user.ltx to read-only, but the game still overwrites the values on every death and pressing certain buttons, such as m4/m5.
Use #π€bot-commands
Don't press those buttons when you're about to die, because the FOV will be fucked
Use #π€bot-commands
Thank you, though it's not working for me. I completely unbound m4 (freelook) and m5 (freezoom) via config file, Free Zoom is disabled via MO2, I thought that the problem could have something to do with first person death script, so I disabled that in config, too (can't find corresponding mod in MO2). I'm testing from a new game, no saves, just spawn in Cordon, equip my toz and die to a rookie. Mouse sensitivity gets set to 0.071 immediately upon death. I can tell because I usually play fps games in very low sens, and the 3rd person death camera just goes ZOOM at the slightest move of my mouse lol.
Edit: For anyone finding this in the future, the problem seems to have been that I was trying to use a value which you can't set via the in-game slider (0.02443). If you run into this problem, don't be a smartass like me and just set it to the closest value to what you desire.
thats just normal for the update?
Getting this when I launch the game. Tried updating the game files through the launcher, didn't help. Is it something to do with the anomaly folder?
the enemies are imortal to me for some reason is this normal?
im having the same issue but for moon-halo-wan-c
same file line though
same here
im trying to find the root file for the error line but its hard to find anything with all these file destinations
!k98
1) Go in this folder: [YOUR GAMMA FOLDER]\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches
2) Copy these four folders (check pic)
3) Go to your Anomaly folder
4) Paste these four folders (check pic)
5) Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference:||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β||||β|| _ _ _ _ _ _
https://cdn.discordapp.com/attachments/1098945649929617478/1110295790104092753/tk98.jpg
#π¨base-gamma-support message
fixed issue for me
i found the fix
hm?
its mod 290 atmosperics shaders weathers and reshade. go in reenable auto update. and reinstall the mod. choose your options and click all the required choices then replace all files on prompt. it will work afterwards
you uh might have to be a little more in depth
i also don't know what you mean by auto update
Indeed it changed the error log for me
that error is for the same mod
if you call me ill guide you through what to do
im in installation suport rn
Right click the mod in the organizer and click reinstall mod and then make sure both required options are checked and click Ok. This fixed it for me
In your cases this will most likely say "UN-ignore update"
So click it if so, then reinstall the mod
Is this the right place to upload CTD errors and get support?
Today I decided to update after like a month and got this error and CTD. Completely vanilla GAMMA
lol
this works for the "moon_halo_1st_q" error
i legit have that exact question too! lol was just about to paste it!
Did yall skip all the optional stuff for the reinstall?
sometimes things just fuck up
what do i do then?
I can help in a sec but lemme just make sure I can load first
Ok yeah it works, thanks everyone
Lebron, starts the launcher and go into Mod Organizer as usual
yup
Then in the "filter" tab
uh huh
type 290
ok
right click on the mod, then left click "UN-ignore update"
just to be sure this one right?
yup
then start?
no then right click on the mod again, left click on reinstall
anything i should/shouldnt check
yeah i only checked the first two boxes and it works for me
hence why i ask if we need the rest
anyway, check the required ones and then reinstall, then if no errors pop up then the game should run
anyway imma go eff-up Rostok, lemme know if it works
will do, thanks for the help
@narrow mist nope, not working still have the same problem
Same error?
Are there any flags popping up?
but its black screen
I would do a full update again
hey does anyone know how to fix it?
Yeah we've been talking about it. It's mod 290
how do i full update if you dont mind telling me
Close Mod Organizer, then on the launcher just click on the "Install/Update GAMMA"
alright
If that doesn't work, check if you have the error that says "You're not authenticated with Nexus", if so go to settings and do that
!atmos
1.) Go to your
GAMMA\downloadsfolder and deleteAtmospherics_GAMMA_x.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/hippos-shaders-and-atmospherics
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck every box, but leave "Force zip extraction" box checked
6.) Click install / update G.A.M.M.A.
@narrow mist This pin should help you as well.
I need help!!!
could someone help me with this if they are free?
After the update, my save files are not loading, I am getting this problem. Is there any solution?
So I am currently using a SA 58 and unfortunately it doesnt have the inspect weapon animation but it has the sound as if it was inspecting it. Is there a mod Im missing to be able to actually do the inspect animation on that certain weapon? Thanks
this made it work btw thanks
someone send me a screenshot of their modorganizer please. I have reason to believe I am missing mod 290 "Atmospherics Shaders Weathers and Reshade - Hippobot" and need confirmation of this
Well....how many mods do you have in the top right corner
Or just use the search bar in the bottom right corner
didn't see search bar :D
A lot of people miss it
When I launch my game it black screens then crashes with this message. Anyone know a fix or what is wrong? It just started appearing out of nowhere, I could run the game perfectly fine yesterday.
yes lots of people including me are having this issue
I am trying to use this fix that was able to fix the issue
!atmos
1.) Go to your
GAMMA\downloadsfolder and deleteAtmospherics_GAMMA_x.x.zip(x.x. means version number, and yes delete them all if you have multiple of those zip files)
https://www.moddb.com/mods/stalker-anomaly/addons/hippos-shaders-and-atmospherics
2.) Download the mod file from moddb. DO NOT EXTRACT.
3.) Place it into yourGAMMA\downloadsfolder.
4.) Run the GAMMA Launcher as ADMIN.
5.) Uncheck every box, but leave "Force zip extraction" box checked
6.) Click install / update G.A.M.M.A.
I think it's weird this command isn't noted in the pins inside #π€bot-commands. oversight?
my moddb skips over 290 wtf
i was able to lauch and play for about 1 min, then it crashed
look up the zip in and reinstall. check the 2 required items and try it. doing it right now; edit: did not work
uh what does this mean?
Is everyone having this issue or something xD
all fresh installs yes idk
it hanged longer than usual but it gave the same error. RIP
Check pin
lol which pin
damn, it doesnt work
im doing the one that was listed earlier with the deleting the zips and redownloading and extracting

