#🔨base-gamma-support

1 messages · Page 268 of 1

hearty acorn
#

i have to erase stalker gamma to?

tender forge
#

Does it say you need to erase gamma in instructions? No.
Read them carefully and follow the instructions

hearty acorn
honest zinc
#

I'm getting this crash, first in the Darkscape almost to the first campfire, and now when I try to load the most recent save, which would be the autosave after entering Darkscape.

rapid elbow
#

On the nvg fix, it says to copy-paste the .exe files to the anomaly files inside the bin folder. Is that referring to the files downloaded from the installer? if so do i not already have those files installed hence due to me even being able to run GAMMA? am i not just installed duplicate files? I am quite confused...

undone sierra
#

!fps

open minnow
#

i got the game working
are there any 32:9 patches? most is working well but the minimap or pda map are kinda weird

strong oxide
#

the game crashes after I start a new save file. can anyone help please?

glacial pelican
#

I keep crashing, even after using the bot command's solutions. It would be greatly appreciated if someone was able to help me out.

hearty acorn
#

!delete

raw raftBOT
solid pawn
#

Still having this issue when getting a headshot, Ive done a full reinstall of the mods (358) and I don't have any added textures

quaint galleon
#

fresh install

solid pawn
prime fulcrum
prime fulcrum
solid pawn
prime fulcrum
prime fulcrum
# solid pawn

will the crash happen if you try to get a headshot on a new save?

quaint galleon
#

ah shit yeah

solid pawn
quaint galleon
#

too many request

quaint galleon
prime fulcrum
quaint galleon
rapid elbow
#

?

solid pawn
prime fulcrum
#

your normal save is apparently infected with some different blood textures

solid pawn
#

damn that sucks, thanks for the help though

glacial pelican
#

@prime fulcrum While you are here, would you mind helping me out with my problem? The crash log is above not too far. No worries if you are busy.

prime fulcrum
#

get the crash again and post the log again

glacial pelican
#

It hasn't been giving me the "fatal error" message like people above have when I crash. A window will pop up saying there is a crash and that it is being reported and that I have the option to close the game, but it does not report to me what the problem is. The only answer I get is in the logs.

wide lichen
#

seem to be crashing occasionally when using the default knife to quick attack (either npcs or in this case, a box)

versed kettle
#

Hey, not sure if this is the correct channel but I've an issue with the field cooking kit :
Basically it doesn't work anymore, when I click on the food I want to make nothing happens, even tho it works like 2 hours ago, does anyone know what can cause this ?

#

My bad, it now works again after reloading my save 4/5 times

#

it seems like what broke it was either sleeping or getting healed by the great swamp clear sky doctor

glacial pelican
nocturne wagon
#

I think my living legend questline is bugged

solid pawn
#

I think it only happens when shooting duty soldiers?

deep torrent
#

ok why is my screen black now

prime fulcrum
raw raftBOT
deep torrent
#

I did

#

nothing seems to be working 😦

#

big sadge

near veldt
#

Crashes to this when accepting quests. Not all quests but some of them

prime fulcrum
nocturne wagon
#

I still cannot find my living legend quest

near veldt
clear tide
#

Crash when I'm on Rostok (near NW entry). I can come from the south for a little time before crash again when I go to the North

nocturne wagon
#

I cant get the psyhelmet

#

He doesnt sell it, he doesn't talk about it. Apperently the living legend quest is completed or just isnt showing up. Idk how to progress, I just die if I go into anywhere near the red forest.

prime fulcrum
nocturne wagon
#

who?

undone sierra
#

I like seeing my ammo counter and what I have as a backup without going into the menu, how can I enable that

nocturne wagon
prime fulcrum
nocturne wagon
#

idk he may have died, it says I can use the debug menu though, what do I do?

serene rivet
#

Hi IDK if anyone can help .e but I am doing the Explorers quest in Pripyat, I am on the last 2/4 Artifacts one I can get, the other says it's in an electro anomaly but there isno artifact there,I have scan every inch of the area with the best tier detector. Any ideas?

raw raftBOT
heady thunder
shell chasm
#

I'm unable to place anything down. the green dots appear but when I select a spot the green dots stay but the item doesn't appear

astral wraith
#

Anyone know what is causing these colors on the outside of NVGs? Its red during the day, and blue/purple at night, it changes color based on the NVG exposure. It only appears when wearing gas masks and only with the T1 NVG. Seems like a shader issue perhaps?

heady thunder
nocturne wagon
#

SOrry caps

heady thunder
#

rip :(
i have no clue sry

heady thunder
#

i happened to see it while looking for something else

#

and figured i'd toss it here has a guess

autumn inlet
#

hello to all, I just installed the mods everything is running perfectly and arriving at the game I see the map I can open the inventory but black screen

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: f:/anomaly\gamedata\scripts\ui_options.script:1651: attempt to index a nil value

raw raftBOT
autumn inlet
deep mango
#

crashes when i load a save after deleting gamma files and reinstall

#

coffee

autumn inlet
#

I succeeded thank you

livid imp
#

Is it normal for the installer to get stuck really close to the end for a long period of time. Its been a little over an hour at this point

deep mango
#

gamma installs usually take that long yes

#

are you stuck at downloading GAMMA large files?

livid imp
#

Its been stuck at this point for about an hour

#

before there were little windows popping up showing install progress but nothing since it hit this point

deep mango
#

enabled but red, yikes something isnt right

autumn inlet
#

fake joy always black screen

austere wind
#

!resolution

raw raftBOT
#

If you crash upon changing your resolution in game, you can change it before launching the game. In Anomaly/appdata/user.ltx look for the vid_mode line and change it to the resolution you like.

solid pawn
prime fulcrum
#

no

#

!full you can try doing this one more time

raw raftBOT
#

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.

smoky idol
#

Can anyone tell me how to remove the blur from the edge of the screen. I am too stupid to find the setting...

worthy leaf
#

DOF setting?

smoky idol
raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:
1) Open the game
2) Go in Mod Configuration Menu
3) Search SSS Settings
4) Disable whatever options you don't like and/or move sliders to the left

Shaders Cumulative Pack for GAMMA has to be enabled in MO2, otherwise the SSS settings won't be visible.

heady thunder
#

is there a way to turn on the beep from my detector around anomalies

#

or is that off permanently (understandable)

smoky idol
proper ferry
#

I enabled the Volumetric option on the Sunshafts just to see what it would do, and that somehow crashed my game, and now when I'm trying to restart my game to fix it all I get is a bunch of "Shaders failed to load check your log for additional details" and it's only saying the error message at the bottom and it's honestly hopeless for me to figure it out when all the files in shader_cache, no matter how many times I delete it to try and see if it fixes it. It repeats the error, and then says the same thing and the file it's reffering to is almost impossible to pinpoint because they're all called the same code, anyone know any fix?

leaden coyote
heady thunder
#

i swear i looked

#

i will again

leaden coyote
#

Weird, I'm in game, let me check.

heady thunder
#

gamplay diff. last tick

leaden coyote
#

If I want to completely remove any trace of Anomaly or Gamma from my computer before doing a fresh install, are there alternate files anywhere outside of the main gamma/anomaly folder that would effect how it installs? All of my major quest NPC's like the doctor in the swamps for Old Friend and Dr. Sahkarov in Yantar are missing from the game entirely, even after fully reinstalling the game. Anyone have any ideas what I can try?

raw raftBOT
heady thunder
#

maybe?

#

or has that failed entirely

leaden coyote
#

I'll check it out. Thanks.

#

Oh yeah I can manually spawn them in, it doesn't really "fix" anything though. That's what I've been doing to play in the meantime.

#

Sahkarov for example wanders off then disappears after I spawn him in because I assume he spawns in as a standard NPC and not with some quest flags or something.

heady thunder
#

ohh true.. that makes sense

leaden coyote
#

Most of the other stuff I see from searches about missing NPC's seems to just be stuff about manually spawning them in then adding the correct logic to them afterwards.

#

I just don't understand why that would happen on a totally fresh install unless there are files somewhere else on the drive that impact the game.

#

Like how some games store saves in a folder outside of the main game folder or something.

#

The weird thing is I had a plain install and it was working perfect before the last time I updated.

#

Then I start a new game, log in, missing quest NPC's for the main quest.

#

Well, I didn't know that you could execute their specific AI logic, I guess I'll just try that and hope.

last jasper
#

needs uninstall feature for mod orgamizer

leaden coyote
#

Are you saying that it needs one because it doesn't have one or are you saying that's what I should do?

raw raftBOT
leaden coyote
heady thunder
#

maybe you get lucky

leaden coyote
#

I already lost all my long term saves at this point from before but it's fine. My current saves are ones with missing NPC's so I wouldn't want to anyways.

somber mason
#

Quick question about the installation

#

If i accidently stopped the download if i press the download again will it skip over the ones already downloaded and just continue where it left off?

heady thunder
#

It should read that you have those files

#

as long as they didn't delete

somber mason
#

alrighty

#

Thanks

austere wind
#

!default

north turret
#

hello does anyone know what settings i should change as the waters keep disappearing for a split second. not game breaking but it breaks my immersion

frigid inlet
#

I just updated (I did full, since it's been a while) and now the mod refuses to launch with no error provided, it just force closes itself after the splash screen

paper arrow
#

anyone know why the radio refuses to play sometimes in the PDA?

raw raftBOT
austere wind
#

!blackscreen

raw raftBOT
somber mason
#

I uh downloaded everything

#

It says theres 417 mods in total

#

and none of them were enabled after the download

junior moon
# somber mason and none of them were enabled after the download

Check if you are blocked from accessing moddb.com
If yes then wait for the indicated time + 40 minutes.

Then do exactly this:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Change ModDB download mirror from Default to 128 or 127
  5. Click "Full G.A.M.M.A. installation"
    Don't delete anything
somber mason
#

where will it say if im blocked btw

junior moon
somber mason
#

So if i open the website and it just shows up normal im good?

junior moon
#

yep

somber mason
#

alright i did the steps so just wait for it to download and go from there?

somber mason
#

Alright it finished

#

now 358 are active

sharp bough
#

nice

somber mason
#

and im in appreciate the help

ripe garden
#

my game crashed two times and now when i am trying to load any of my saves i see this screen forever

strong flame
#

I was suggested to ask here for help on this shadow issue, its crampin my night time vibes 😭

raw raftBOT
#

To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.

strong flame
#

Yes!!! That worked! Thanks so much

#

Ah spoke too soon lol but its okay I can bear it

junior moon
junior moon
gusty rapids
green wharf
#

hello, my gamma installer has been stuck like this since i left it on overnight

north turret
narrow sparrow
ionic spade
#

OK so first it opens in anomaly for some reason and then when i try to enter the game it gives this what do i do?

narrow sparrow
ionic spade
#

and i don't think that i have any of them activated

narrow sparrow
raw raftBOT
#

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.

ionic spade
#

ok

frigid inlet
#

my depth of field keeps turning itself back on
????

#

I turn it off, I use an item, and its like I never turned i toff, and its on again in settings

raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:
1) Open the game
2) Go in Mod Configuration Menu
3) Search SSS Settings
4) Disable whatever options you don't like and/or move sliders to the left

Shaders Cumulative Pack for GAMMA has to be enabled in MO2, otherwise the SSS settings won't be visible.

amber cove
ocean spruce
#

comrades, how do I turn on the laser designator?I just changed all the buttons and it doesn't work on L, if anythingLipBite

austere wind
#

!k98

raw raftBOT
tender forge
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
amber cove
drowsy cloud
#

how do i make the game greener and not brown and dead

sterile spire
#

is there a list of all the mods i should have active? i have 357 active mods and when i try to start a new game this error appears. Already tried to reinstall the modpack.

tender forge
raw raftBOT
#
  1. Download the old BaS version:

Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z

2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
4) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
5) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
6) Paste the gamedata folder inside this newly created folder
7) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
8) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons

If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.

drowsy cloud
#

my game looks so dead 😭

#

how do i make i lush and fruity

#

i tried disabling some mods but it looks the same

tender forge
raw raftBOT
drowsy cloud
#

thanks daddy

bitter knoll
#

My emissions stopped working. I get the warning but it never happens.

keen cedar
raw raftBOT
#

Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)

bitter knoll
#

the emissions worked fine yesterday and I havent changed anythign

keen cedar
#

can you force an emission with debug mode?

sterile spire
crude dragon
#

First time trying out the mod 🙂

lapis silo
crude dragon
#

😩

keen cedar
# crude dragon

!modlist this is caused by the Duty Expansion mod which you should not have enabled by default anyway - share your modlist

raw raftBOT
#

Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)

arctic halo
#

Full GAMMA downloaded after few updates and this happened

bitter knoll
lapis silo
#

or start a new save

keen cedar
raw raftBOT
#

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.

keen cedar
#

!custom to backup your custom mod list

raw raftBOT
bitter knoll
#

okay

crude dragon
#

Might've f ed up by doing that tho

keen cedar
keen cedar
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
north turret
#

I keep having an issue where items cannot be used (e.g. first aid kit) and the bars on groks BHS are not moving. this causes the game to crash if I try to save the game. anyone know what's up?

crude dragon
keen cedar
raw raftBOT
#

DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.

If you are still unsure whether you have it or not, try to do any of the following:

  • interact with objects or people
  • use a weapon (you shouldn't even be able to see it when you select it)
  • open your inventory
  • drink/eat/sleep
  • check your HUD in the bottom left corner

If you cannot do any of this, it probably means you do have busy hands.

The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.

Certified DISABLED animations that bring busy hands:

  • Opening/closing backpack and any option related to this
  • Animation for skinning mutants
  • Disassembling objects with Left-Alt pressed
  • Picking up objects where you can see the hand movement
keen cedar
north turret
#

thanks

keen cedar
crude dragon
#

It runs but I ran into another problem. I can only see the UI and everything else is dark

raw raftBOT
vestal hawk
#

hello i have an issue and im not sure if it has been answered already

#

i just downloaded anomaly 1.5.2 then the gamma files etc i have launched anomaly 1.5.2 and then when i click the installer it instantly crashes

bitter knoll
#

@keen cedar I did a full install but I still can't force an emission. I loaded a 1 week old save and it works. I guess the save got corrupted. Is there a way to fix a save or nah?

vestal hawk
#

i launch it as administrator too*

crude dragon
keen cedar
keen cedar
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

vestal hawk
#

i made a thread already i suppose i used the wrong channel

bitter knoll
keen cedar
bitter knoll
#

lmao that log message wasnt for me, I just realised

#

sorry mate

chilly ivy
#

hey guys, just did an update and when i start the game it still says gamma 5.4.2, also now it crashes with a message can't open section 'wpn_fort17', sorry if this is a common problem, new to gamma.

keen cedar
chilly ivy
#

the only other thing that i have active is turn this on if you stutter , i tried turning it off and it doesn't change the outcome

keen cedar
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

chilly ivy
keen cedar
# chilly ivy !crash

this just says the game closed successfully... the game overwrites the log every time you open it. can you make it crash out again and resend this?

#

because it should have that "cannot find file" error at the end of it

blazing laurel
#

Hey y'all, just installed GAMMA for the first time and I'm having crashes when accepting certain missions in Cordon or while turning in others. Specifically Clear area of Mutants missions

#

Only other mod I activated was the stutter fix, but the missions were crashing me beforehand

keen cedar
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

gusty blade
#

hello! Does anyone know how I can solve this error when I want to create a game?

chilly ivy
tidal dragon
#

someone knows why it crashes when i want to go to Radar?

keen cedar
keen cedar
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

gusty blade
keen cedar
# gusty blade

you have missing/corrupt mods (the red crosses in MO2), which you can fix by running another full install. Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN.

Then:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do. No need to delete any files
tidal dragon
keen cedar
tidal dragon
#

oh okey

keen cedar
# tidal dragon oh okey

and - how many mods do you have active in MO2? do any of them have a red cross next to the name?

keen cedar
tidal dragon
tidal dragon
#

got 341 mods active and 2 crosses

#
  1. on 234- Newly added addons and G.A.M.M.A disabled
keen cedar
# tidal dragon got 341 mods active and 2 crosses

you are missing mods. you should have #📍577-mods-in-mo2. Go to https://moddb.com and see if you are flagged as a bot. If you are, you will see a big red screen. You can either wait for the block to expire or use a VPN. Then run a full install:

FULL INSTALL:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
keen cedar
#

!move @blazing laurel move Anomaly (and GAMMA) into a location like A:\Anomaly and A:\GAMMA using the following steps

raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
tidal dragon
#

maybe im missing mods because im playing in DX8 and i unmarked some ticks

#

but if i need to reinstall the game all my data will erase right?

blazing laurel
#

Thanks, will follow the steps rn

keen cedar
tidal dragon
#

okey, ty for your time

#
  1. Click "Download G.A.M.M.A. data" is this right???
lone charm
#

game crashes after 30 mins everytime, no matter which mode i play , messed around with graphics but doesnt seem to help, any suggestions? considering just uninstalling and trying again another time.

keen cedar
raw raftBOT
#

1) Grab the latest installer: <#📢announcements message>
2) Open your GAMMA folder
3) Open .Grok's Modpack Installer, it's a folder inside your GAMMA folder
4) Paste the installer called G.A.M.M.A. Installer.exe in here and overwrite
5) Launch it with admin rights
6) Click on Download GAMMA data
7) Click on Full GAMMA installation
8) If you already did two Full GAMMA installations, wait at least one hour or you'll be blocked

keen cedar
lone charm
#

usually happens when an NPC shoots or just after a gun fight, sometimes just random

keen cedar
storm eagle
#

is the save file is corrupt

#

i tried to load my saved game but it crashed and show this

lone charm
storm eagle
keen cedar
#

run a full install again to start

#
  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
lone charm
storm eagle
#

i removed a few mod like campfire save etc

#

it still work

keen cedar
storm eagle
#

ok

storm eagle
#

I am stuck in limkash fighting with Qin mission

#

if i update now will it erase save file

frail grail
#

I get this when trying to launch, anyone able to help?

tender forge
vestal hawk
#

what to do if moddb flags me as a bot

frail grail
tender forge
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
outer kiln
#

can anyone help ?

tender forge
raw raftBOT
frail grail
#

@tender forge It worked, but now when i start the screen is black? I can walk and everything, just cant see.

raw raftBOT
storm eagle
#

well the game start for me i hope it don't crash anymore.

frail grail
#

@tender forge The Shader cache deletion worked, Thanks

tender forge
tender forge
rain light
#

I have no audio in game, pc audio is fine. this is a known problem i think but I can't find a fix. I tried opening the anomaly launcher and clicking the sound workaround box, but it didn't help. The sound did start once, the game started in a small window with sound but when I clicked inside it maximized the window and the sound was gone.

marsh geode
#

Got this CTD when going to Yantar from the Aprogrom swamp exit

rain light
#

I'm also getting a graphics card crash with this error message, this is universal i think it may be a card issue but just in case

blazing laurel
marsh geode
#

Got another error trying to spawn in Dead City

tender forge
twin field
#

Hello guys, can someone help me with this?

deft tapir
#

how do i start the game? from here

narrow sparrow
narrow sparrow
#

!full

raw raftBOT
#

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.

fast halo
#

someone got some time?

#

my game crashed, and didnt start anymore, so i did a full gamma install and now it still doesnt start but i get a crash message

narrow sparrow
fast halo
#

i sec

deft tapir
fast halo
twin field
narrow sparrow
# fast halo

When did you last update gamma? There was a temp fix released for this

fast halo
#

15mins ago

deft tapir
fast halo
#

i pressed full gamma install

narrow sparrow
umbral kraken
#

wow this was 100% not worth it

narrow sparrow
narrow sparrow
deft tapir
fast halo
#

i didnt see any red X es but i got 362 mods on

#

i took out the extra mods i ticked and try it now

narrow sparrow
fast halo
#

same issue

deft tapir
#

ok i'll try

narrow sparrow
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
narrow sparrow
#

!modlist then send your modlist

raw raftBOT
#

Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)

fast halo
narrow sparrow
# fast halo

You are either missing something or this isnt the latest gamma version.
Open the installer as admin
Click download gamma data

eternal spindle
#

I've just shortly got a bug to report that I couldn't find in the chat for known issues with the game.

fast halo
#

ooooh, i think this is the mistake i did mistake,

eternal spindle
#

It's happened twice since I first started playing GAMMA yesterday, but maybe every 15 pings from Discord or so, the game will just randomly lose all sound and will need to be restarted to get them back. Messing with the sound settings doesn't seem to work.
As mentioned, it's not consistently happening. Just maybe once every 15-20 notification pings or so.

civic locust
#

yo can someone help me

civic locust
#

i updated gamma and now it doesnt open when i lanch, just the gamma screen then closes

junior moon
civic locust
#

no i have 336 and no red crosses

#

active mods

junior moon
# civic locust active mods

Check if you are blocked from accessing moddb.com
If yes then wait for the indicated time + 40 minutes.

Then do exactly this:

  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Change ModDB download mirror from Default to 128 or 127
  5. Click "Full G.A.M.M.A. installation"
    Don't delete anything
civic locust
#

ok tnx so just reinstall/reupdate

#

tnx bro cant belive you just on here hahahahaaha

junior moon
wide zenith
#

Hi i've got extremely low fps on the game and my gpu is a 100% even though i have a RX6800 a ryzen 2700x (running at like 50% ingame) and 32gigs of ram any idea of things to improve my framerate ?

deft tapir
ivory drift
#

hey guys, real quick, how do you uninstall the gamma data? I think the easiest way to fix my problems is just to clean install gamma..

wide zenith
#

nope thanks i'll comeback after checking

junior moon
ivory drift
#

so see you then Ig /:

civic locust
junior moon
civic locust
#

even tho i am eu?

junior moon
#

we use them for debugging installs, despite their slow speed

#

so yea, despite you being in Europe

civic locust
#

ok tnx i am installing

tribal bough
#

i got an error when trying to start a new game but idk how to use the bot command channel

tribal bough
#

i followed the little tutorial thing but idk if i did it right and it doesnt seem to be doing anything

#

[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...y/bin/..\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)

#

when i start a new game it crashes in loading screen

narrow sparrow
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

civic locust
junior moon
pine sable
civic locust
#

damn bro why

frail verge
#

can you play coop this game ?

junior moon
junior moon
raw raftBOT
#

GAMMA isn't multiplayer and never will be. There's no multiplayer mod for Anomaly or Open XRay engine currently. There's no multiplayer open world mod currently publicly released for Stalker games.
xrMPE is a match based coop experience that is available, it has the most solid netcode but it's not open world.
Stalker R.A.D. is open world and is based on CoP + Gunslinger but isn't publicly available.
Ray of Hope is open world and in closed alpha.

civic locust
#

i legit only updated the game today once and thats it for my moddb usage in the past few months

#

what now

frail verge
#

ok thanks

junior moon
civic locust
junior moon
hearty acorn
#

well, yesterday for some reason the game broke, try everything but i want to make a clear installation, so delete Anomaly and GAMMA (for some reason i cant erase .Grok's Modpack Installer, so i move it to other folder), in the night left the install goes and when i come back to work, he got stuck in there, close and open again GAMMA installer, press on Full GAMMA installation and never goes up when hit Dux's Innemurable Characters Kit

civic locust
#

nothing happens tho

junior moon
civic locust
#

lmao

tender forge
#

did he just spam click gamma data?

civic locust
#

yes

junior moon
#

because if you did, then you clearly are able to continue

ivory drift
#

okay so basically, what happened is that I went through all the steps to install (installing anomaly, updating to 152, getting the RC3 stuff, all that) and when it was time to do a full installation of gamma, I clicked the corresponding button, locked my pc, and went to bed.
a short while after I woke up there was a power outage, which I though would be fine because I had given the game plenty of time to install, but now I'm getting 2 or 3 new error messages that are a bit concerning. when I have the mod organizer open, and it is set to anomaly DX11-AVX, and I click run, it locks the organizer, nothing happens, and it goes back to being unlocked. (I have checked xray_yourname.log, no fatal errors)
here are the worrying error messages:

civic locust
junior moon
ivory drift
tribal bough
#

i have another error

#

my game wont launch and all my mods have an x by them now but idk why they have that

deft tapir
#

@narrow sparrow i made joked, it didnt worked i needs help to make work plz

junior moon
deft tapir
ivory drift
#

sorry if I just wasted time

#

;-;

tribal bough
#

i followed the instructions and now when i click run it does nothing

narrow sparrow
raw raftBOT
hearty acorn
tribal bough
#

now im getting this error

deft tapir
#

it kinda worket the shortcut button came back

narrow sparrow
deft tapir
#

how?

narrow sparrow
deft tapir
north tendon
#

hello i dont see the addon link in the how to install section any help hehe

tender forge
narrow sparrow
north tendon
north tendon
#

only the update to 1.5.2

ivory drift
hearty acorn
tender forge
lunar basin
#

Hi there! I installed the game following all instructions to the letter from your startup tutorial for Windows. Everything was followed, using 7Zip, permissions, updating Anomaly to 1.5.2 first and booting it up once, it was all done with precision. When it came to launching the game (DX11) through the GAMMA shortcut ( I do have 358 mods installed ), the Anomaly logo shows and about 15 seconds later, that disappears with no error warnings. I then went back as per instructions, and updated GAMMA and did the full GAMMA addon installation as instructed, still getting the same result sadly. Sorry for this crazy TL;DR!

ivory drift
#

oh god I used winrar

hearty acorn
ivory drift
tribal bough
#

why is this on the mods now

raw raftBOT
junior moon
lunar basin
# keen cedar !k98

Hi veer thanks for responding, is this a 'bad weapon' causing the problem maybe?

ivory drift
tender forge
keen cedar
#

so go do that

#

hence the bot command

ivory drift
lunar basin
junior moon
raw raftBOT
#

Anomaly and GAMMA use .7z, this is the file format of 7zip.
WinRAR does the same thing, yes, absolutely, but you can have problems along the way.
So, it's better to use 7Zip.

ivory drift
rocky grail
#

i set some values and want to keep them but that doesn't work the values change again in my user.ltx file

#

why can't i set my user.ltx file to "read-only" ?

lunar basin
keen cedar
pine sable
#

hey guys, i justed checked my modlist for red X's and i have a few of them ... so what can i do to "uncross" them? 🙂 thank u in advance!

ivory drift
#

this all good? correct number of active mods, and I don't see any red Xs

#

@junior moon

#

oop- fuck

#

it did the same thing, which is that I hit run, it locked MO2, acted like the game would start, aaaaand it didn't. plus I noticed that all of the fucking errors were still there because I am that blind

jaunty thunder
#

well boys I think since classes start tmrw this is a sign to quit for a bit

junior moon
jaunty thunder
#

I finally started to clear out agroprom underground and I keep crashing and now it won't even start 💔

ivory drift
#

oh oops

jaunty thunder
ivory drift
junior moon
# ivory drift there

wtf is this folder name, reduce it to one word, GAMMA sometimes gets angry when the names are too long

keen cedar
# ivory drift shit

couple of things.

  • avoid using special characters like =$!&*() in the filepath name
  • your antivirus has almost certainly fucked up your GAMMA/MO2 install. What antivirus do you use?
stray frost
#

greetings!

Got this thing recursively happen after 1-3 minutes in game:

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: m:/games/anomaly\gamedata\scripts\global_position.script:75: attempt to index local 'offset' (a nil value)

stack trace:


Default modlist.
No manual changes in scripts.

Full stackstrace attached.
Could someone please advice?

ivory drift
junior moon
ivory drift
stray frost
tender forge
stray frost
#

This channel is polluted enough already to miss related questions.

ivory drift
#

mb

keen granite
#

Hi. I know it's not directly related to the GAMMA but I have a massive problems with camera controls in clean Anomaly. Any ide what can cause it?

keen granite
#

ok. thx for help. bye

upbeat elk
#

Hi there. So this is the first time I'm trying out gamma, I've had some performance issues and checked out the fps guide, it all went swell.. however a lot of stuff had went pitch black, there's something wrong about the lighting and I need to know where I could post a screen of it, or if the lighting is indeed supposed to be weird after changing some settings from the fps optimization channel.

raw raftBOT
vapid hare
#

What's the download size for GAMMA?

ivory drift
#

the minimum space required is 70 gb I believe

vapid hare
#

That's the space required, not the download size. Both are different since the download size is usually a lot smaller before unpacking.

ivory drift
#

just tryna help

ivory drift
junior moon
vapid hare
junior moon
light timber
#

Hello, pressing home on my keyboard does not open reshade. Anyone know how to open

#

I dont understand, Isnt reshade part of Stalker Gamma

#

I was told to adjust the game visuals I need to open Reshade using the home button which doesnt work

tender forge
raw raftBOT
light timber
rustic bear
#

helloooo, any reason i can only save in PO'S and not outside of them? plus some weird "daddy token" is a thing now

#

no, the campfire option isnt on

kind swift
#

It loads anomaly for some reason then crashes before it starts can anyone help?

willow mesa
#

Having problems with Ryzen 7 5700u on direct x11

#

at address 0x000000014010096E

FATAL ERROR

[error]Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
[error]Function : CRender::texture_load
[error]File : ..\xrRenderDX10\dx10Texture.cpp
[error]Line : 535
[error]Description : The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.

[error]Arguments : c:/gamma/bin/..\gamedata\textures\glow\glow_fire1_012.dds

stack trace:

#

There seems to be a memory leak, since the mod launches on dx8 but not 11 or 10

fleet bluff
#

Would a 2070 Super count as beefy GPU for this game? XD

steel herald
#

sorry to interrupt anything BUT, I would like to ask if you could make the installer not appear on top of everything all the time ?

fleet bluff
#

Use Windows+Tab and click new window

naive halo
#

the how to explains to create a new desktop and move the installer there

warped sage
#

I hope is this the right channel, my game is crashed and i got the following error message, anybody see this before?

naive halo
trim void
#

@dusky cedar I now believe that the audio bug was because of something to do with v-sync? Found some other people with this same bug with stalker games and none really know what the deal is but some said that v-sync fixed it for them.

pine sable
#

what error?

green wharf
# green wharf

this doesn't seem right but thats just me, plus its been frozen for a while. not only that in the console it says "A device which does not exist was specified"

#

maybe some files are corrupted or something?

raw raftBOT
#

If your installer is stuck and you can read "Instruction solving..." at the bottom, follow this:

  1. Close the installer
  2. Go to your C:/Windows/System32 and look for a file called Robocopy.exe
  3. Copy this file and paste it in GAMMA RC3/.Grok's Modpack Installer/resources.
  4. Remove Robocopy_10.exe from this folder and rename your recently pasted Robocopy.exe to Robocopy_10.exe
  5. Relaunch the installer with admin rights, it should be fixed.
green wharf
#

This happens when I paste the file into there

#

last time this happened was in the middle of extracting files for GAMMA, and i had to redo the installation process for it to be fixed

#

but now its happening again?

keen cedar
green wharf
#

in my D drive, why

keen cedar
#

This is a "Anomaly is missing files" issue - reinstall Anomaly. If you got data errors when you extracted the file in the first place you will also have to re download it

keen cedar
green wharf
#

i just checked my .Grok's Modpack Installer file

stray frost
green wharf
#

is there supposed to be a zip in that file?

ivory drift
#

okay I give up. I've tried a bunch of things, and I think my best option at this point is to do a fresh install using 7zip and proper file names.
so how exactly do you fully uninstall the gamma data?

green wharf
#

Oh I see

green wharf
#

if thats the issue

stray frost
sharp bough
#

@green wharf @stray frost OI! What's all about?

#

Y'all fixing issues without Helpers?

stray frost
ivory drift
keen cedar
#

Since your issue seems to be only with the installer

ivory drift
pale mauve
# keen cedar Just GAMMA for now

Hey, there's a guy in installation support by the name of Daks who keeps begging me to ping someone to help him so if you could please?

solar magnet
#

Lads, could anybody help me? I wanted to use HD Models but when I try to load a save on Rostok the game crashes with "Can't find model files" error message. I tried disabling dux, blackjack patch, and installing gboob patch but no dice.

keen cedar
ivory drift
sharp bough
#

or can you not see that thread?

solar magnet
#

I can't find that thread

keen cedar
solar magnet
#

dam

brisk zinc
sharp bough
keen cedar
#

simply never use hd models

solar magnet
sharp bough
#

AND BEHOLD THE FULL TRUTH OF THE SERVER that you can see

#

Not the entire truth, that's saved for us kekleo

solar magnet
#

_i s e e _

green wharf
#

guess i thought too soon

stray frost
solar magnet
sharp bough
sharp bough
solar magnet
#

it is still a lot more than earlier

green wharf
#

eh sucks for me i guess lmao

north tendon
#

the game not starting when i launch it from the mod manager

#

shows only stalker anomaly then shuts down

stray frost
raw raftBOT
north tendon
#

works

#

thank you so muchverynice

#

now i can travel as a loner in stalker again farewell my friends

sharp bough
reef sleet
#

why does my screen go blurry everytime i eat now 😦 ...

#

help pls

raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:
1) Open the game
2) Go in Mod Configuration Menu
3) Search SSS Settings
4) Disable whatever options you don't like and/or move sliders to the left

Shaders Cumulative Pack for GAMMA has to be enabled in MO2, otherwise the SSS settings won't be visible.

keen cedar
#

Elaborate

halcyon elm
#

The Ballistics Overhaul crashes my game randomly, probably when there's gunfire. I've barely been able to get far in

#

Should I just disable it?

keen cedar
#

Nope

#

That will crash you on startup always

halcyon elm
#

It's probably because I disabled some default mods then

#

I'll re-enable them and see if it still dies

hearty acorn
#

okey, why i cant delete .Grok's Modpack Installer?

#

i'm trying a clean install of both games and that folder in specific can't erase

polar saffron
#

Ive only got 358 mods installed, is that the wrong number

hearty acorn
polar saffron
#

How do i figure out whats missing?

hearty acorn
weak nebula
#

Quick question, Depth of Field just wont turn off, what can I do about it?

raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:
1) Open the game
2) Go in Mod Configuration Menu
3) Search SSS Settings
4) Disable whatever options you don't like and/or move sliders to the left

Shaders Cumulative Pack for GAMMA has to be enabled in MO2, otherwise the SSS settings won't be visible.

weak nebula
keen cedar
polar saffron
keen cedar
#

good to hear

tender forge
#

Bet he did k98

grand parrot
short holly
#

anyone knows how to fix this?

keen cedar
floral field
#

I'm hitting this trying to start a new game after choosing my loadout

#

I've copied gamma's patches to anomaly's folder already

#

I had to do that to get the game to start.

#

Any ideas?

raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

floral field
#

Wuuuut? I thought I did install 1.5.2

#

Might've been lit tho. Trying now.

#

I assume I'll have to copy the patches over again after doing this, @sharp bough ?

sharp bough
#

What patches?

floral field
#

Gamma's modpack_patches.

#

I couldn't get the game to start without manually copying those into my anomaly folder

keen cedar
hearty acorn
#

its everything fine? the download its moving and i'm waiting to see if dont get stuck like yesterday in the night

fierce marten
#

Probably not

sharp bough
#

has anymore errors appeared?

sinful quartz
#

if i update the mods will it wipe any changes i made to sliders, values, etc?

ivory drift
#

yo so while I was re installing gamma ANOTHER FUCKING BLACKOUT HAPPENED while I was doing the full install.
I had gotten anomaly and it's 152 update, gotten the RC3 file, and had done all the stuff leading up to clicking the full install button. all of that should be good.
I should be able to run the gamma installer, click the full install button, and it will pick up where it left off, right?
like will I have to choose any different mirrors, or delete the RC3 content and redo all of that stuff, or should I be good?

tender forge
raw raftBOT
#

"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message

ivory drift
bitter star
#

Does anyone know how to disable a translation in the game? I installed one in Spanish but it's a disaster

reef sleet
#

me no speak english -_-

bitter star
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
ivory drift
bitter star
#

thx

sharp bough
short holly
#

this is the screen shot of the anomaly folder

ivory drift
keen cedar
short holly
#

ok thanks

full lily
#

The stalker closes when I start it and I have everything right, I install with the mods
Any idea why this is happening to me?

sharp bough
noble citrus
#

Hi guys, I had to do a fresh reinstall of ANOMALY, unzipping the file results in corruptions, and they're also listed in the launcher when verifying the files. Anyone know how to fix this? Just redownload the file itself and start over?

sharp bough
noble citrus
#

I know that, I had to do a fresh reinstall entirely, I can't get the base anomaly file to work

sharp bough
#

As for the archive errors, you may need to download the torrent

noble citrus
#

Thank you for the confirmation!

full lily
#

install stalker anomaly start it and it works, but when i install the mod pack, i try to start it but it closes without giving me any error

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

golden tangle
#

I’ll have to send my crash log when I get home. I have the proper amount of mods, followed instructions but when I load in the game crashes.

honest zinc
#

I'm repeatedly getting this error in Darkscape:

#

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\vehicles\veh_zaz968\part\veh_zaz968_u_01_part0.ogf'.

sharp bough
tender forge
tender forge
honest zinc
#

Vehicle shit fix kekw

sharp bough
#

NO! sad

#

S5yn ruined it for me

honest zinc
#

It's ok you helped me last time doge1 doge2

sharp bough
odd torrent
#

hmmm

#

so i followed all the steps in !dest and !152 and now it won't launch at all, but doesn't show an error. it plays the windows error noise

#

but with no error to show you i don't know where to start,sorry 🙃

raw raftBOT
odd torrent
neat cairn
#

Hello, can anyone show me how to increase max carry weight?

tender forge
#

Craft a bigger backpack guessidie

neat cairn
#

what if i want to carry anything not nailed down...

#

do you know how i can increase the limit of 50 to lets say 200

tender forge
neat cairn
#

ah, thanks

wooden adder
#

Crashing close to finish loading a new game
"! Fallback to default bump map: build_details_bump#
stack trace:
at address 0x00000001400BEFA0" doublefacepalm 358 mods active in mo2 btw

wraith ocean
#

Is the Mag redux install in FAQ up to date, Mo2 gives conflicts

raw raftBOT
#

In order to properly enable Mags Redux:

  1. Enable Mags Redux (Disable G.A.M.M.A. Unjam Reload) (the mod under "Optional")
  2. Disable G.A.M.M.A. Unjam Reload on the same key (yes it's a mod, no it isn't a keybind)
  3. Enable Ammo Check (this is a mod as well)
  4. While in game, check your keybinds for RELOAD and UNJAM in Settings > Controls > Bindings
  5. After successfully following all steps, you need to Left-Alt + left click the magazine to add to your loadout, before a reload can work
    Bonus) You can also enable Mags Buyable at Traders if you want, it's a mod already inside your mod list

KEEP IN MIND that once you enable Mags Redux, you can't disable it in your current save file.
The 100% safe way to do so is by loading a save where you DON'T have the mod enabled OR by starting a new game WITHOUT Mags Redux.

You can also use this workaround if you want to disable Mags Redux in the middle of your game, it works if used properly:
<#🖇old-mods-posting message>

wraith ocean
#

thank you

tender forge
floral field
#

Is there a way to perform the portion of the installer without the download? I already have all the mods in download, but the installer deletes the contents of the mod's folders if it fails the download and DOESN'T use the cached versions

#

I don't want to manually extract 300+ mods

wooden adder
wide zenith
#

I don't know if i'm supposed to say that here but i've got an ingame issue, soemtimes after fights i keep taking damage from my limbs and they can't be healed, everytime i heal them they still decrease and i can't run without taking damage

#

wtf am i supposed to do ?

raw raftBOT
wide zenith
#

thanks

lament wyvern
#

what is the best way to fix performance issues?

alpine lance
#

hi, the game sometimes freezes and then goes back to normal but today it crashed out of nowhere

floral field
#

@prime fulcrum I want to install all the gamma stuff. My previous installation failed, so I'm flagged by moddb as a bot. But, all the mods are still in the download folder.

#

Clicking install tries to download them again, and if it fails, the mod folder is empty

#

Because the download failed

#

Even though the mod archive already exists in ./downloads

prime fulcrum
#

you're flagged by moddb

#

wait until you'll get unflagged

floral field
#

That's the download portion. I already have all the mods downloaded

#

Why would I have to wait for moddb to unflag me for it to extract them?

prime fulcrum
#

the installer can't verify the mods because you're flagged as a bot

#

you can't access moddb = installer can't access moddb

prime fulcrum
golden tangle
#

how do you get crash report?

prime fulcrum
#

!crash

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

sharp ruin
#

Can anyone help me with the "busy hands" bug? Every time I make a new save, it seems to creep back in again and I'm unable to load my save with FDDA unchecked in MO2 without the game crashing so I can't try the fix suggested in the server

golden tangle
#

it crashes when i load a new game

sharp bough
sharp ruin
#

The one in troubleshooting under Guides

sharp ruin
#

Yup that's the one!

sharp bough
#

Mmmm.... Me thinks that's a legacy fix

sharp bough
paper pendant
#

Guys, I need help.

sharp bough
crisp scaffold
#

is there a fix for the freelook zoom locking fov at around 70 or so ?

crisp scaffold
#

is it just kinda broken im assuming

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

paper pendant
#

Does anybody know what the problem is?

sharp ruin
sharp bough
raw raftBOT
prime fulcrum
raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
golden tangle
#

so its my install location then

sharp bough
paper pendant
sharp bough
sharp bough
golden tangle
#

so if it just took it out of program files, and moved it to the New Volume D: folder..it should work?

golden tangle
#

thanks!

sharp bough
# sharp ruin Sadly no

well... never try to install extra mods on a 300+ modpack unless you know what you're doing...

#

@prime fulcrum you still want his crashlog or should I just !default him?

golden tangle
#

i dragged them over to the D folder but when i hit launch its saying the file doesnt exist in the old location..so how do i say refresh it or get it to read new location?

sharp bough
sharp bough
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
sharp ruin
#

Thanks guys! Apologies for the headache

old sparrow
#

hello i have a problem that started around the first of last month that crash's my game client rarely when i kill the last stalker that was in combat with me.

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

old sparrow
#

what's a bkp?

lone charm
#

just re-installed and crashes when starting a new game

sharp bough
raw raftBOT
#

You haven't updated to 1.5.2, that's why you're seeing this error.
If you already updated to 1.5.2 and still having problems, it means you did something wrong.

  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

old sparrow
#

the files im looking at has a mdmp at the end

sharp bough
#

wrong file, take a screen shot of that folder

old sparrow
sharp bough
# old sparrow

drag and drop that one, also the .bkp is above that one, do try and pay attention

old sparrow
#

like that?

sharp bough
old sparrow
#

the mod list?

sharp bough
old sparrow
wooden adder
#

So, I did the framerate optimisation thing but now I want to reset the patches, when reinstalling Beef's NVG which options should I pick to default the installation? I feel this should have been mentioned in the #old-framerate-optimisation channel

old sparrow
#

only extra thing's i have downloaded is the seasons and the skills extended mod

sharp bough
#

go there

sharp bough
#

!default

raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
wooden adder
sharp bough
hard thunder
#

Why is my character’s thumb broken?

sharp bough
sharp bough
#

what?

hard thunder
#

My thumb in game, it was twisted backwards

sharp bough
hard thunder
#

No

#

But it was pretty weird

sharp bough
wooden adder
# sharp bough

Yeah reinstalled only the main mod, but I guess it gets completely redundant by the shaders cumulative pack for GAMMA overwrite right? 🤷‍♂️ Is it how it shows for you too? If not then I might missing some patch

hasty quarry
#

Is there a current bug with gun sounds being stuck to you?

sharp bough
#

but following it blindly does tend to fuck up peoples games

sharp bough
hasty quarry
sharp bough
hasty quarry
lone charm
sharp bough
lone charm
sharp bough
whole marsh
#

I've transfered both GAMMA and anomaly to another pc, deleted the ini file and the mods folder, run again the whole process, from powershell to full gamma installation, have 358 active mods, but the game crash at the start (after hit play)

sharp bough
#

!move

raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
sharp bough
#

and if you did send me this

#

!crash

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

whole marsh
#

wait maybe it's wrong: it's list my old pc

lapis umbra
#

cant open this stash. any ideas?

sharp bough
raw raftBOT
#

Stashes are empty by default; you will have to find or get coordinates to actually find something in them.
These coordinates can be obtained as rewards by completing quests, by reading PDAs that you can find on the bodies of stalkers you kill and you can even threaten wounded stalkers to get them, before you kill them.

You can also buy them from traders, although the location is always random, so it could be anywhere.
And yes, if you buy coordinates from a trader in the northern part of the zone, it's always gonna be random.

whole marsh
lapis umbra
whole marsh
#

but i don't think i've any of that,it's a new pc (first day)

sharp bough
lapis umbra
lapis umbra
whole marsh
sharp bough
#

Screenshot MO2

whole marsh
sharp bough
lapis umbra
whole marsh
#

this, right?

sharp bough
ivory drift
#

okay so I got the game running, I've configured all my keybinds, gameplay settings, graphics settings, all that stuff, and I'm just looking for some suggestions on the best mods to disable for optimal performance.
I've already disabled the shader mods (other than beefs night vision stuff), and the HD mutants mod, and all reshade FX are off. I'm thinking to probably disable the HD characters mods but I can't find which ones they are.

whole marsh
prime fulcrum
sharp bough
sharp bough
whole marsh
#

no, 11

sharp bough
ivory drift
raw raftBOT
#

If you have Windows 11:

  1. Be sure to disable Bit Defender if you have it
  2. Be sure to update MO2 to the latest version, 2.4.4. Follow these steps in this pic: https://i.imgur.com/vG6SqwM.png
  3. Add an exception for Anomaly and G.A.M.M.A. in your antivirus
sharp bough
#

@whole marsh bot above

whole marsh
#

yeah, i'll do

hasty quarry
#

Tarkov audio pretty much

dreamy ore
#

fresh install CTD when starting new game. FATAL ERROR

[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...anomaly/bin/..\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)

sharp bough
worthy spire
#

Anyone know what causes this? I have to hit V to use the full scope

Don't mind the nv

sharp bough
dreamy ore
sharp bough
sharp bough
radiant wigeon
#

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report

I keep receiving these errors, the only fix command for the bot that I've seen is 'head_damage_017' and I followed what it said, and the error is still popping up

raw raftBOT
sharp bough
#

I'm off. Good luck y'all

worthy spire
sharp bough
sweet vale
whole marsh
worthy spire
#

Better but I still have to hit V to get full view of the scope.

Just an ultra wide issue??

lone charm
#

Free zoom keybind keeps also changing my fov and just keeps me zoomed in, not sure how to stop it

crisp scaffold
#

i asked that question about an hour or so ago

#

its just broken

lone charm
crisp scaffold
#

it works for about 10 minutes and break again i just stopped using it but i like to forget that and still do it anyways me

wraith ocean
#

Can you disable dof when eating, drinking, healing etc?

coral onyx
#

i clicked full gamma instalation before clicking download gamma data, am i fcked?

autumn carbon
#

Getting big lag spikes, tried Dx11, Dx10, AVX on both.
I did do the fps optimization things, could it be that i need to swap down to the original textures?
I7-6700 and a 1060. 16gb ram

prime fulcrum
#

you don't need to download anything, it's just reinstall 1 mod

coral onyx
prime fulcrum
#

yes

coral onyx
#

dammit

#

Do i have to delete anything or can i run it again ?

prime fulcrum
#

no

#

!full

raw raftBOT
#

Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To do so:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

In case you want to save your in-game or MCM settings (because the installer will revert them back to default), type !backup in #🤖bot-commands.

autumn carbon
#

Try Dx9 AVX I suppose. If not I'll probably have to change my textures over which makes me sad

coral onyx
autumn carbon
#

Ah okay

#

I guess I'll have to put on the old textures then. Hopefully it helps

autumn carbon
#

Enabled triple buffering for my GPU, Will try the classic textures and report back 🫡

delicate harbor
#

I've been having consistent game crashes during loading screens most of the time. I think it's related to invalid memory accessing and it may or may not almost destroyed my pc that seems to only have been fixed by reseating my ram.

left wigeon
#

Hi, i have this problem with some scope so far (that have night vision)
My monitor is 16:9

north turret
#

Hey Guys. Is the 3.7 gamma installer still viable?

tired rampart
#

How do I fix my health bar being all red on the body, arms, legs, and the torso and head being yellow. I cannot see my stamina bar or my radiation bar but can see the icons to the left.

north turret
tired rampart
#

Oh ok I only did it once when I tried

wraith ocean
#

Is there a way to make it so theres no dof when eating drinking healing etc

north turret
#

I once had to reload a one save earlier and it hurta lot when the autosave is off

tired rampart
#

Depth of field

#

Sss settings

north turret
#

Then I'm not sure as I have to play on DX8 with only lens flare shader enabled to keep constant 40n fps

tired rampart
#

The dof is in the mod menu in sss settings then click on the weapons dof and scroll down

wraith ocean
#

okay thank you

lament wyvern
#

hi guys whats the best way to tweak performance options?

north turret
lament wyvern
#

tried to play the game recently and i've been having fps issues but I didn't have it some months ago

lament wyvern
north turret
lament wyvern
#

oof

north turret
#

Yeah...

tender forge
raw raftBOT
#

1) Grab the latest installer: <#📢announcements message>
2) Open your GAMMA folder
3) Open .Grok's Modpack Installer, it's a folder inside your GAMMA folder
4) Paste the installer called G.A.M.M.A. Installer.exe in here and overwrite
5) Launch it with admin rights
6) Click on Download GAMMA data
7) Click on Full GAMMA installation
8) If you already did two Full GAMMA installations, wait at least one hour or you'll be blocked

north turret
#

ok, which mods do i disable to get rid of "busy hands" bug? cause this is the 5th time in 2 days my game crashed and ofc i just managed to kill the damn chimera in swamps on my 5th try and then game crashed

lunar pebble
#

Hum, I currently have a slight problem: my screen tend to freeze for a few seconds every few moments. Not in a periodic way, more like random. But it's still something like at least once or twice per minute. Sad

tired rampart
#

Check out the mod organizer and search stutter

lament wyvern
lunar pebble
#

Me: "I'm going to kill a bloodsucker with a knife!"
GAMMA: "Do you mean "I'm going to kill a bloodsucker, then buy a knife?"
Me: "Did I stutter?"
GAMMA: "No, but I certainly did. plud "

prime fulcrum
lament wyvern
noble coyote
#

🤔 i am confused, i looked thruw the "Only install" stuff there's not exactly what i encounter or im blind could be both its 5 AM here

i did exactly the installation routine, have updated to 1.5.2 launched GAMMA & installed 358 mods, i do get no error message whatsover just a short "bleblur" sound from window and thats it.
i do can start the game regulary from its own launcher but as soon as i launch it with the GAMMA launcher/MO2 i just crash and idk why 😩

raw raftBOT
south gust
#

what does companion rework mod do? is it worth turning on?

prime fulcrum
noble coyote
#

@tender forge ouh shiet that fixed it! yar a frustration fixer! feel ya kissed ya sexy mf'er 😚

keen cedar
left wigeon
keen cedar
#

!modlist send it over regardless, just to check

raw raftBOT
#

Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)

feral skiff
#

I get a microstutter(like 10-20ms maybe, noticable but very short) every 1-2 seconds while walking. It either doesn't happen or isn't noticeable when stationary, even with camera movement, looking for it. Is this a known, fixable issue or is this a lol STALKER issue and I deal with it? I've tried the regular stutter fixes.

keen cedar
#

welcome to trying to play a decade+ old game with 300+ mods piled on top

raw raftBOT
#
  1. Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on Download G.A.M.M.A. data and then Full G.A.M.M.A. installation)
  2. Bring your modlist back to default (type !default in #🤖bot-commands)
  3. Enable the "Turn this on if you stutter" mod in your MO2 (you can found the mod under the G.A.M.M.A. Fixes separator)
  4. If you have a NVIDIA GPU, you can enable Triple Buffering in NVIDIA control panel
  5. Open Anomaly Launcher via MO2 and tick Prefetch sounds
  6. If you have a beefy GPU, use Anomaly (DX11)
tender forge
#

Start from #3

feral skiff
#

done that stuff already, no change in behavior

keen cedar
# left wigeon

which scope is it that has the issue because my other guess would be that the mod responsible installed weird

feral skiff
#

I wouldn't be surprised if it was just a modded stalker thing, but I don't remember it happening a couple months ago with substantially worse hardware