#🔨base-gamma-support

1 messages · Page 234 of 1

gray loom
#

who will help me

winter needle
#

Its like i have time to read 100000 pages of this discord and cant count on simple decency of someone who already knows smth... Read it for 5 mins, still didnt found the anwear...

sacred dune
#

still crashing

narrow sparrow
sacred dune
narrow sparrow
# sacred dune

when you reinstalled the mod did you click replace or merge?

sacred dune
#

replace

narrow sparrow
raw raftBOT
#

A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

sacred dune
#

ok i will try this

charred wave
#

Could someone help me with something

narrow sparrow
charred wave
#

I downloaded OpenAL and it still doesn't work.

#

I've looked around my control panel for sounds but unsure of what to do.

narrow sparrow
charred wave
narrow sparrow
#

in Anomaly/bin?

alpine compass
alpine compass
#

the patience these mods and helpers havepeepopray

charred wave
charred wave
narrow sparrow
charred wave
hoary raft
gray quail
#

Hey all, been playing for a few months, decided to see if I liked the game with the autumn retexture off, turned it back on and now all the grass textures are this ugly blue-tinted dark green colour.

#

Anyone else had this problem?

inner heart
#

2 of Longreed's fixed artefacts spawns under maps
2 of Grulag's Dead Bushes
is that normal?

narrow sparrow
lyric hawk
#

hey hey when ever i start a character and press start this error appears, it only appears when using dx10

north turret
#

I fixed this

inner heart
narrow sparrow
opal flame
#

Is it possible to delete a quest item for a quest you've cancelled?

#

I'm in the Debug mode but I can't see any way to actually delete items you already have

winter needle
# prime fulcrum man

WATER radiations, i havent even touched it my dude and i get irriadied a lot more...

knotty onyx
#

is there any way to download Gamma mods other than moddb? im getting flagged as bot all the time

fleet wyvern
#

pain, what should I try disabling this time?

winter needle
#

if you dont have the patience to help without being an ass then dont bother, i didnt came here to argue pointlessly. I look for some similiar topics around the chats, havent found anything and thats why i asked, the update only changed water radiation.

narrow sparrow
raw raftBOT
#

#╓☢stalker-chat message

Explanation to your problem:
Those upgrades are from Anomaly vanilla, you shouldn't see them, because GAMMA have different stuff. There is a mod that change the "vanilla" upgrades into "modded" upgrades.
Follow this guide and the problem will be fixed.

inner heart
fleet wyvern
narrow sparrow
north turret
fleet wyvern
narrow sparrow
north turret
#

I cant find the gamma addons link

narrow sparrow
north turret
#

All asus service ?

#

I got an error files in my overwrite mod directory

split mulch
#

Hi. how I can switch off "depth of field"? It always on.

white quest
#

Hello people, if an artifact isnt spawning for a mission, is there anything I can do?,
IF, you refer to debug mode, please include how to activate it in gamma 🙂

gray quail
#

Hi me again, no luck with those textures, still looks like shit.

#

What is the fastest way to reset everything?

#

all mods and settings

north turret
# narrow sparrow yes

I try it and restart my PC but don't work the game don't launch, The xray no more refund

opal flame
#

I still need help with this, my saves are basically completely fucked because of Hermann's mission

tender forge
opal flame
#

Yeah, it's at 1.5.2

#

Hermann's mission about the scanner has basically completely broken my game whenever a psy-storm or emission comes around

#

And the earliest save that I have is taken almost directly after I accepted the mission for him

#

Doesn't matter if I complete the mission, cancel the mission or kill him, the errors occur anyway

north turret
#

I have this message can U help plz

tender forge
#

Hmmm, im now worried myself since i did complete the scanner mission for herman once... So far haven't crashed yet, but i was mostly sleeping and during those times emissions occured.

(Gonna try forcing psy emission and see what happens)

narrow sparrow
opal flame
#

Yeah because of this I'm about to lose a week of progress

#

fml

narrow sparrow
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
tender forge
#

Ye forced psi emission, no crash

north turret
opal flame
#

Fuck's sake man, of course the universe just had to align against me again when I'm having fun notlikethis

fair wind
#

Have an issue where I can't go into Limansk. Getting this fatal error on trying to go in there

tender forge
fair wind
opal flame
#

I've got the log for this error here, at this point I have no idea what's causing it other than that it's related to the mission I took and I'm pretty sure all my saves are simply fucked beyond saving now

tender forge
#

error again concerning "dolg_voin" KekSkew

opal flame
#

Wait, is mine a dolg_voin crash?

tender forge
#

in log it says dltx error and mentions dolg voin and dolg scientist, and there was a crash fix pushed yesterday #📢announcements

sacred dune
#

now i have this thing

opal flame
#

Shit, so I should just try and install that and see if it fixes?

narrow sparrow
#

Disable gamma loading screens - cs eden

tender forge
#

(unless you haven't updated in a very long time, then that would require full gamma install)

opal flame
#

Nah I've updated quite recently, I haven't played Gamma for more than a week

#

I'm gonna see if this works, if it does, I'll be like a new man until I inevitably run into something new that breaks my game kekw

fair wind
#

Exact same crash btw, after doing add-ons. Gonna try a full install real quick to see if that helps anything.

sacred dune
fair wind
rain barn
#

Is there any support for 32:9 SUW? I can only play at like 1920x1200 on my monitor or full SUW at 32:9 and UI elements are broken

opal flame
tender forge
#

now we have both cases of dolg scientific red causing an issue, while voin got fixed salutelmao3d

opal flame
#

So what is exactly happening here, since I don't really understand all the logs?

fair wind
#

Yeah, cuz I assumed it was something with the fatal error at the end.

opal flame
#

That's what I assumed as well, but I see the scientific_red

tender forge
#

my guess, I think the crash is caused with grok recently playing with rad resistances, and one mod file mod_system_balanced_armor_rad_res_gamma.ltx probably creates a conflict and crashes the game
(im no modder so take my word with a grain of salt, but that's what log suggests with its "fatal error")

opal flame
#

But then how come the causes for the crashes are so different between us, like, surely that has to have some effect on what exactly is wrong

#

Because Mapes is trying to enter Limansk, I'm taking cover from a psy-storm

tender forge
#

causes different, yet source is the same

glass frigate
#

my game keeps blinking white, anyone knows why?=

opal flame
#

So I'm essentially just going to have to wait for Grok to push a fix for the dolg_scientific_red conflict?

tender forge
#

pretty much, unless Helpers have more info in their knowledge base text file that might have a fix for it.

opal flame
#

Here's hoping

fair wind
#

That's unfortunate... cuz I have two missions in Limansk I wanna complete. Been putting 'em off for a couple weeks now.

opal flame
#

I was having fun fighting Monolith and Sin and then all of a sudden I get bit in the ass by Professor Hermann's quest

tender forge
thorny pagoda
#

oh sorry my bad i head there now thx

glass frigate
prime fulcrum
raw raftBOT
prime fulcrum
prime fulcrum
opal flame
#

Hang on, like this?

glass frigate
prime fulcrum
#

ok, wait

#

type tasks_measure.script in this filter box and screenshot

hardy valley
#

i need my mods to be 357 again, how do i reset it

opal flame
#

There's nothing here

sharp bough
hardy valley
#

no, i got 341 but it still works

sharp bough
hardy valley
#

i just did the brightness tweaks that can be seen here in the discord channel faq, i updated just now

sharp bough
#

go to moddb.com and post a screen shot of what you see

hardy valley
opal flame
prime fulcrum
tender forge
#

can confirm same

ruby grail
#

Recently I play as normal, but when I try going to Radar underground second time, I had problem with my HUD. It doesn't show any companion, positive effect, negative effect and ammo count. I try reload save but it doesn't solve the problem, I even use full installation and open the game, it still the same.

prime fulcrum
#

what is that log referencing then

fair wind
# prime fulcrum screenshot your MO2

Will post in one moment, just did a full reinstall and gonna test one more time. Will post another log w/ the MO2 screens after if that didn't work.

prime fulcrum
#

@opal flame i think you need to reinstall anomaly bruv tomfoolery

#

!dest

raw raftBOT
#

You'll need to delete your Anomaly folder.

  1. Open your Anomaly folder, if you have any save files you want to keep, take them from this folder: Anomaly\appdata\savedgames
  2. Delete your Anomaly folder
  3. Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send !152 in #🤖bot-commands)
  4. Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#📢announcements message>)
  5. Click on Download GAMMA data and then click on Full GAMMA installation
hardy valley
#

how do i reset my mods to 357?

prime fulcrum
raw raftBOT
opal flame
#

Oh well, that is a solution I suppose

dark ibex
#

Hello, i crash when trying to go to merc base in Dead City: FATAL ERROR

[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\weapons\wpn_p90\wpn_p90_lazer_hud.ogf'.

distant kite
#

Can someone assist me with this please? Happens everytime at the same time in game no matter what I'm doing.

fair wind
hardy valley
#

@prime fulcrum still 341 after i did the scrambled part

dark ibex
narrow sparrow
raw raftBOT
#

If you crash with this error during an emission: surge_manager_ignore_npc

  1. Open your mod list
  2. Find 265- NPCs Die in Emissions for Real
  3. Right click on it, click Reinstall and then Replace
hardy valley
#

some mods are ticked off, i already updated just now too and i just did the fps boost graphics in faq

distant kite
fair wind
hardy valley
#

i need to revert my mods back to 357

narrow sparrow
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
hardy valley
#

@narrow sparrow still 341, idk why

heavy marlin
#

Already tried disabling DOF but it wont go away

#

Any leads?

prime fulcrum
raw raftBOT
#

A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

tawdry sorrel
#

is there a way i can change the position of the body health system UI?

distant kite
opal flame
opal flame
#

Yeah I'm reading those but I just wanna be sure, I don't gotta delete the Gamma files

quaint iron
#

so im new here i have tried to download gamma twice last night and everytime i tried to boot it it just stopped with no msg at all i have looked at the how to install in the discord but that still dont work

opal flame
#

Once the install is done, I'm gonna check if MO2 can find tasks_measure.script

prime fulcrum
eager brook
#

Is it a feature or i have some problems with game? My problem is that after couple of patches, the overall population of stalkers decreased. Before i could always see monolithians at Limansk bridge at red forest, nowadays it's just empty, same with barrier in army warehouses, also no more mercenaries at Limansk and dead city is now really dead

heavy marlin
granite glacier
#

hi it says I need an update for the reshade

#

how do I update it

#

on their website ?

last tulip
#

I'm getting the blue screen radial bug, whenever I ADS with NVGs on a scope everything just turns blue

north turret
#

ayo do we need to install addons i cant find it on the download sectio only the rc files

north turret
#

got it

cerulean vault
#

hi, game keeps crashing with no error message when i enter rostok

#

when i load game and wait 5 min it will still crash with no message

north turret
#

Yo i have some problems with step 3 of installation

#

It says a couple of .dll files are missing

#

the rest of the error message is german and just says that shit aint working cuz those 3 are missing

#

launcher starts without problem btw

narrow sparrow
narrow sparrow
raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:

  1. Open the game
  2. Go in Mod Configuration Menu
  3. Search SSS Settings
  4. Disable whatever options you don't like and/or move sliders to the left
narrow sparrow
tender forge
heavy marlin
narrow sparrow
placid silo
#

[2022-12-10 16:01:00.365 D] command line: '"D:\Gamma install\ModOrganizer.exe" '
[2022-12-10 16:01:00.365 I] starting Mod Organizer version 2.4.4 revision 1df1ea5e in D:/Gamma install, usvfs: 0.5.6.0
[2022-12-10 16:01:00.365 I] data path: D:/Gamma install
[2022-12-10 16:01:00.365 I] working directory: C:/Users/USERNAME/Desktop
[2022-12-10 16:01:00.365 D] timing: MOApplication setup() 0 ms
[2022-12-10 16:01:00.406 W] Nahimic (also known as SonicSuite, SonicRadar, SteelSeries, A-Volute, etc.) is loaded.
[2022-12-10 16:01:00.406 W] This program is known to cause issues with Mod Organizer, such as freezing or blank windows. Consider uninstalling it.
[2022-12-10 16:01:00.406 W] C:/ProgramData/A-Volute/A-Volute.28054DF1F58B4/Modules/ScheduledModules/x64/A-Volute.SonicRadar3DevProps2.dll
[2022-12-10 16:01:00.406 W] Nahimic (also known as SonicSuite, SonicRadar, SteelSeries, A-Volute, etc.) is loaded.
[2022-12-10 16:01:00.406 W] This program is known to cause issues with Mod Organizer, such as freezing or blank windows. Consider uninstalling it.
[2022-12-10 16:01:00.406 W] C:/ProgramData/A-Volute/A-Volute.28054DF1F58B4/Modules/ScheduledModules/x64/NahimicOSD.dll
[2022-12-10 16:01:00.406 W] Nahimic (also known as SonicSuite, SonicRadar, SteelSeries, A-Volute, etc.) is loaded.
[2022-12-10 16:01:00.406 W] This program is known to cause issues with Mod Organizer, such as freezing or blank windows. Consider uninstalling it.
[2022-12-10 16:01:00.406 W] C:/ProgramData/A-Volute/A-Volute.SonicStudio3/Modules/ScheduledModules/x64/A-Volute.SonicStudio3DevProps2.dll
[2022-12-10 16:01:00.937 I] using game plugin 'STALKER Anomaly' ('stalkeranomaly', variant (none), steam id '') at D:/Stalker Anomaly
[2022-12-10 16:01:01.993 E] profile 'Default' does not exist
[2022-12-10 16:01:01.993 E] picked profile 'G.A.M.M.A' instead
[2022-12-10 16:01:01.993 E] The selected profile 'Default' does not exist. The profile 'G.A.M.M.A' will be used instead

#

any ideas my game wont load up

narrow sparrow
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

nimble totem
#

It'll look like this. FATAL ERROR

[error]Expression : <no expression>
[error]Function : CKinematicsAnimated::Load::<lambda_ac4997f1d615f02e51ae9eaf365dee8f>::operator ()
[error]File : ..\xrRender\SkeletonAnimated.cpp
[error]Line : 784
[error]Description : fatal error
[error]Arguments : Can't find motion file 'dynamics\weapons\wpn_vintorez_n1\wpn_vintorez_hud_animation.omf'.

stack trace:

Mine is crashing when I go from the Great Swamps to Agroprom btw

placid silo
#

Expression : <no expression>
Function : CInifile::r_section
File : Xr_ini.cpp
Line : 544
Description : fatal error
Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report

stack trace:

#

this?

raw raftBOT
narrow sparrow
lyric hawk
#

gamu a bit dark

heavy marlin
north turret
lyric hawk
#

is it actually normal?

heavy marlin
#

you can try and turn the brightness like .3 up

north turret
#

i think my windows is broken

heavy marlin
placid silo
#

@narrow sparrow that worked thank very much

hardy valley
#

pls help

lyric hawk
narrow sparrow
north turret
hardy valley
north turret
#

hey there lads, I've got only 204 mods enabled, not 357, how do I fix that?

heavy marlin
past mesa
#

full installation fixed my errors, thanks boss

mortal nimbus
#

Yesterday i tried to install gamma on my brother's pc and that happened all the time, i searched in this channel for solutions and tried the keybinds, mod_patches and move folder to another disk, but nothing works, can someone help?

heavy marlin
heavy marlin
north turret
#

I've already tried reinstalling, didn't help

hardy valley
#

i did a full gamma install instead of addons, and that assertion failed thing pops up now

heavy marlin
#

also dont forget to install that one patch at Grok/GAMMA/modpack_patches

mortal nimbus
north turret
#

is it ok?

summer agate
#

thank you

heavy marlin
charred wave
#

What is ! C:\GAMMA\Anomaly-1.5.1.2.7z: Write error in the file
?

nimble totem
hardy valley
#

need help with this

thin kraken
#

Hi all !
I have a strange problem : I can't see my companion's icons nor can I see hunger/thirst/sleep notification, nor even the interraction prompts like "speak" or "search".

nimble totem
narrow sparrow
sharp fulcrum
narrow sparrow
placid silo
#

started newgame when in game i have black screen any ideas?

placid silo
hardy valley
wicked forum
#

Hello, after the character creation i've this error: Expression
:‹no expressions
Funcion
: CScriptEnginenlua_pcall_failed
File
:..rServerEntities\script_engine.cpp
Line
:204
Description : fatal error
Arguments
:LUA error:
.. 1.2
(4)\gamedata\scripts\ao_mp412_monkeypatches.script:98:
attempt to call field 'callback add' (a nil value)

raw raftBOT
#
  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

placid silo
#

any help black screen when in game?

vague siren
#

mag redux not letting me reload also how do you check how much ammo is in the mag

north turret
#

just reinstalled once again, didn't help

heavy marlin
#

did you do a Full Install?

hardy valley
#

@narrow sparrow nothing worked

lyric hawk
#

kinda spooky

crisp scaffold
#

anybody have any advice on fixing occasional freeze frames? its not stuttering really the screen will freeze every couple of seconds here and there and everything cuts out audio and all and will glitch back into real time and keep playing

#

i have always kinda had this issue im just not sure why it does it

delicate kettle
#

My game seems to crash when I get to the Controller room in the Brain Scorcher, is there a fix?

rugged sable
#

Hello everyone!
I started to play as military yesterday, finally made it to rostok. Everything is okay, noone hostile, I can speak to loners etc.
But after I complete some arena battles, I am not neutral anymore 😦 Zhorik, or.. Lorik dont know the name, there are many "rik"s there 😄 immidieatley starts to shoot me when I leave the building after the arena battles.
Am I the only one with this situation?

tender forge
crisp scaffold
#

i have that on already, i have a pretty chunky rig as well so theres not really a reason for it. its not like a frame stutter it physically freezes for a half second

rugged sable
#

Did you tried turn off Core 0 in task manager?

#

I did it today and never leave the 60 fps (limited to 60 :D)

crisp scaffold
#

oh wait i did in fact forget about that i will try that

hardy valley
rugged sable
#

let see then 🙂

hardy valley
# hardy valley

I already tried full installation and addons, still does not work

tender forge
#

At that point i would personally just nuke both folders
Wait some time just to be sure moddb doesn't ban for a few hours
Do a proper full install step by step and hope for the best

wicked forum
lyric hawk
#

i guess dx10 doesnt work on me,will try dx11 and see

limpid sedge
#

I have the same issue and it drives me crazy. Is there any fix for that?

fossil wadi
#

Anyone know why the using the scope on the ISG version of the AK 5c makes my FPS drop like a bag of hammers?

tender forge
#

Probably because the scope is not 2d and it renders the game a 2nd time at a zoomed level, hence fps drop

junior moon
north turret
#

Hey I have this message why ?

winter island
#

!scout

raw raftBOT
nimble totem
wicked forum
narrow sparrow
ornate topaz
#

Don't have the error message because I just went to bed after the crash. Has anyone else had their game crash to desktop after clicking on details for the artifact melter

inland night
spiral surge
#

Anyone else having an issue with faction goodwill not changing? It's not allowing my traders to level up

timber karma
#

Hi, y let the game for like half an hour in a loading screen (with the press a button to continue) and now things are weird. When i zoom in (not aim but the zoom in addon) it doesnt restore normal fov after letting the button go. Also, my character ui in the left bottom corner doesn't show my stamina, hp or anything, just empty bars. Any idea? I saved and reload to see if it was just a minor error but it persists. Should i just reload an older save?

north turret
#

Need help. Just enabled trader overhaul but it didn't change anything. It is still at the usual Gamma progression experience. Any tips?

narrow sparrow
tender forge
keen cedar
#

!tro

raw raftBOT
#

Trader Overhaul isn't about weapons and armors (no you don't need to start a new game): <#╭📖faq message>

keen cedar
#

@north turret

timber karma
#

Any ideas?

#

It even lowers my sensibiliyu

keen cedar
#

Does this happen on a new game?

junior moon
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

tender forge
#

no
i once experienced that myself, hud didnt work properly, each time i clicked fire button it would change fov, sensitivity changes, then busyhands. that save was properly screwed.

starting a new game fixed the issue, and disabling free zoom mods pretty much eradicated busyhands

timber karma
velvet path
#

Yoooo ! Hope everyone good ! I have a little problem, I just deactivated my Reshades mod in the reshade menu ingame, BUT I can't remember what are those who were activated ? can you tell me if I can just reset the reshade menu ? Thx a lot !

keen cedar
#

First 8 are enabled by default

velvet path
#

Ok I see thank u very much !

timber karma
#

I loaded an even older save and after changing zone it works, I'll try to take it from here and see if it goes ok.

quaint iron
#

NEED HELP i have just done a fresh install off gamma and every time i click run it comes up with the stalker tarting screen and then stops its getting to the point where im just going to give up i have tried to go thur the discord to find help and im yet to get any

little raptor
#

ok, so I played for like 80+ hours and had a few crashes... but since today: 5 crashes to desktop. Is there a Log that can be checked?

wispy quest
#

These are just quick questions. Is there a reason I haven't seen NPCs surrender for the entirety of my playthrough and I'm at the CNPP point? They always just get wounded and lay there or run. Also, is the AI a bit goofy for just me with recognition times when there's multiple enemies? I've updated

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

bronze marlin
#

What is the mod that speeds up PDA and torch activation, I would rather want it to be slow as before

warm hatch
keen cedar
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

quaint iron
swift marlin
#

so, ive been attempting to follow the framerate and optimization channel's steps, and every time i try to do these steps
"Delete Anomaly/appdata/shaders_cache folder

  1. Be sure to copy paste the GAMMA RC3/.Grok's Modpack Installer/modpack_patches/appdata/user.ltx to the Anomaly/appdata folder. Delete Anomaly/appdata/shader_cache folder.

  2. In the Anomaly/bin folder, right click DX11-AVX.exe > Properties > Disable Fullscreen optimization."

The game will give me an error of "Shader compilation failed, check your log file for additional information" - if i change any of the graphics settings in game, it gives me the same error every time I try to start the game

#

ive been working at this for 2-3 days now. ive got one last attempt in me before i just uninstall and not try again.

quaint iron
#

nope nothing click run and the game dose fuck all i have reinstalled 4 times now and i cant get my head around it

swift marlin
#

yea, now theres a new issues

timber karma
#

You have 357 mods i suppose?

swift marlin
#

so thats gonna be a nope from me. it hasnt been fun going through literally 30+ hours of trying to fix this game that clearly doesnt want to work without hitching.

quaint iron
#

yes mate i have 357

olive goblet
#

Anyone know how to fix the texture of the specterDr? its stuck like this and reinstall hasnt helped

modest monolith
#

hello

#

can somebody help?

sacred cypress
#

for some reaon i can't disable depth of field. i disable it in settings, apply, and it re-enables it for some reason.

timber karma
#

SSS settings

sacred cypress
#

oh, thanks.

long prairie
#

Is there any toggle that makes the health HUD only appear when being damaged?

haughty torrent
#

Hey i did a fresh install because i wanted to try EFP. Where do the save games go?

untold rain
#

Anyone else having strange behavior if you are using the MP7 with an Specterdr? For me the game crashes if I die with it in Hands and if I try to enter Agroprom Underground I am getting immidiatly spat back out. Also I am falling into Levelchanges much sooner like the Lab in Dark Valley where it drags me down while crossing the Courtyard to the Entrance above the Lab Entrance.

haughty torrent
#

I saved the save files, where dey go

white willow
#

After I installed the update the game opens normally. but the graphics are all black, all the features are ok, but everything is black, walls, objects, etc...
any solution for this?

north turret
#

Do I need to install everything in the installer if I exit out of it?

hardy girder
#

How do I disable the new depth of field effect while using items?

timber karma
#

MOD MENU

#

SSS

cloud gust
#

Im trying to use the Karabiner 98 Kurz but it seems to not shoot where the scope is pointing

hardy girder
#

nevermind found it

cloud gust
#

My k98 scope is slightly off to the left how can i fix this?

north turret
#

Playing as a merc, got duty and loners to 500+ rep yet they still shoot me on sight, is it intended? I remember playing gamma a few months back and at 500 rep you became friendly with them, was that changed?

modest monolith
#

Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...maly-1.5.1.2/bin/..\gamedata\scripts\task_functor.script:391: attempt to index local 'squad' (a nil value)

stack trace:

#

can anyone help?

tender forge
north turret
tender forge
#

If it has a patch still on, yes

#

Wait

#

Check your relations pda, are mercs enemies with those 2 factions?

Just mercs, not your own goodwill with them

north turret
#

Mercs yeah, I dont have fluid relations on. I was running disguised as clear sky getting up rep with them so I would have chill time later on, but when I wore my merc suit they still shot me on sight

#

So if I tear the patch off they shouldnt attack me, correct?

tender forge
#

Ye try to tear off the patch and see what happens
Just not infront of them

(Tho if you tear off the patch, you will be viewed as your current faction.. aka merc, so now i really doubt that tearing off the patch will do anything KekSkew)

elder sentinel
#

im having an issue where some guns are very off center and dont zoom in right. any fix for that?

coral sleet
simple halo
#

CAN help me please ?

north turret
vocal agate
#

the installer stops on anomaly radios extended, how do i fix this?

pliant shuttle
#

Hello, does anyone know how to disable depth of field permanently? I have to disable it every time I run the game and it keeps on setting itself while playing randomly

modest monolith
untold rain
keen cedar
# untold rain Tried the crash on death with MP7 in Hand some more. Any Optics cause this behav...

hey this is perfect, I have been looking for someone with this bug so I can refer it to Grok for troubleshooting
Could you please upload, to this channel:

  • Your modlist (!modlist for instructions)
  • Your crash log (found in Anomaly/appdata/logs, the text document called xray_yourname)
    The crash log MUST come from right after you've crashed out - it overwrites every time you launch Anomaly. Thank you!
raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:

  1. Open the game
  2. Go in Mod Configuration Menu
  3. Search SSS Settings
  4. Disable whatever options you don't like and/or move sliders to the left
cloud gust
undone meteor
#

okey

#

this is broken lol

keen cedar
undone meteor
keen cedar
#

ah yeah... that screen does NOT like to be played on anything below 1920x1080 unfortunately

thin oasis
#

Anyone have an idea why my game has a stutter? every 10-20 seconds it freezes and then it starts allover

keen cedar
#

!stutter

raw raftBOT
#
  1. Update G.A.M.M.A. to the latest version (open the installer with admin rights, click on Download G.A.M.M.A. data and then Full G.A.M.M.A. installation)
  2. Bring your modlist back to default (type !default in #🤖bot-commands)
  3. Enable the "Turn this on if you stutter" mod in your MO2 (you can found the mod under the G.A.M.M.A. Fixes separator)
  4. If you have a NVIDIA GPU, you can enable Triple Buffering in NVIDIA control panel
  5. Open Anomaly Launcher via MO2 and tick Prefetch sounds
  6. If you have a beefy GPU, use Anomaly (DX11)
keen cedar
#

as for "why"... old game has old engine that is singlethreaded and it's straining very very hard to do all the a-life calculations

undone meteor
#

well, i can maybe see the cards numbers, maybe... god dammit

thin oasis
worldly monolith
#

Hello, when i hit the nvg key it doesn't do anything. When i hit the headlamp key, animation plays but sometimes the lamp works and sometimes it doesn't work. I have nightivision upgrade on my binoculars but there are usually no nightvision when i use it. Anyone knows the fix?

undone meteor
#

oe @keen cedar there is not a mod, to repair that thing?

keen cedar
#

not that i know

keen cedar
pliant shuttle
narrow sparrow
mighty ferry
#

did anyone figure out how to solve the crashes yet ever since i updated the game yesterday i cant load into my save file anymore

narrow sparrow
mighty ferry
little raptor
#

ok, there is no helping it: My game is now crashing so much, it's no fun anymore. Just CtD no error message, what to do? PepeKMS

narrow sparrow
raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

stuck nymph
mighty ferry
stuck nymph
#

do i need to disable the two qlo mods to work as a vanilla?

little raptor
keen cedar
crimson gate
#

is the last lines of the xray log the ones that need to be investigated to look into why a file crashes? or the entire log?

stuck nymph
keen cedar
#

when was the last time you updated

narrow sparrow
little raptor
#

yes

stuck nymph
narrow sparrow
# little raptor yes

First thing you can try is to update gamma. There was a hotfix released yesterday it might help with your issue

untold rain
keen cedar
narrow sparrow
little raptor
stuck nymph
#

question*

keen cedar
#

when did you last update/install GAMMA

stuck nymph
#

yesterday i think

keen cedar
#

what method did you use?

narrow sparrow
keen cedar
#

as in which buttons did you click

stuck nymph
little raptor
stuck nymph
keen cedar
raw raftBOT
#

Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)

narrow sparrow
narrow sparrow
#

You can reinstalling following this

  1. Find the mod in MO2 using the search bar
  2. Right click > Open in Explorer
  3. Delete everything inside the mod's folder
  4. Run installer as admin
  5. Click "Download G.A.M.M.A. Data"
  6. Click "Only install G.A.M.M.A. Add-ons”
little raptor
bronze marlin
#

What is the mod increases PDA/ tourch speed animation? I'd much prefer the slower animation.

bronze marlin
#

thank you

digital tide
#

can anybody help me with the Kar98k it doesn't appear when you pull it out

keen cedar
# stuck nymph

ty. the crash you have is very rare and will require more looking into

toxic mantle
#

How can I fix this? It occurred to me when there was a storm in 'Agropom'

raw raftBOT
#

Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.

The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.

This is what you could find:

  1. xray_yournamehere.txt
  2. xray_yournamehere.log
  3. xray_yournamehere without any file extension

You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with nothing at the end.
DON'T send anything with .bkp at end.

Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.

raw raftBOT
#

If you crash with this error during an emission: surge_manager_ignore_npc

  1. Open your mod list
  2. Find 265- NPCs Die in Emissions for Real
  3. Right click on it, click Reinstall and then Replace
cunning meteor
#

where is the uh addons pack download at

narrow sparrow
wheat wave
narrow sparrow
# wheat wave ?

Find G.A.M.M.A. Weathers in MO2, right click > Open in Explorer. Delete everything inside this folder. Then, open the installer as admin > download GAMMA data > Only install GAMMA add-ons.

wheat wave
#

kk txs

toxic mantle
narrow sparrow
#

click yes

wheat wave
#

there is a lot of stuff

toxic mantle
keen cedar
#

cancel out, you'll have to manually download it

narrow sparrow
wheat wave
narrow sparrow
toxic mantle
wheat wave
keen cedar
# toxic mantle How will I do it? I'm sorry guys for the inconvenience, newbie here.

no problem! So first right-click on the mod "NPCs Die in Emissions For Real" and click "Visit on ModDB". Then:

Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into your GAMMA\downloads folder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button

urban glacier
#

Hello can anyone help me with this: im in yantar and every time i try going into agroprom, the health and nvg broke, the nvg flip animation is there but no actual nvg. The health bar stays all red too.

toxic mantle
keen cedar
#

but it should fix the error you are currently experiencing

urban glacier
#

I tried going back a save ago and everything is fine, but everytime i go to agro everything just breaks

keen cedar
cunning meteor
#

im on step 7 and idk what i means by click browse and then show the anomaly folder

stuck nymph
narrow sparrow
toxic mantle
toxic mantle
narrow sparrow
raw raftBOT
#

"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message

rose pewter
#

Why does walking to the Jupiter - Zaton transition area not move me?

urban glacier
toxic mantle
#

Okay, thank you for assisting me @narrow sparrow @keen cedar . I'll update you guys ASAP after doing the fix, and I'll update also whenever it fixes the problem. Thank you!

rose pewter
#

Am I missing something? Is the area to move to Zaton not in the northern river?

narrow sparrow
rose pewter
#

Well the only other way to get to Zaton is from the power plant

gritty summit
#

Hey im having an issue where i cant loot, cant make daddy saves and or command squads and it just happens suddenly i need to make a normal save and then reload to fix the issue anybody know this?

narrow sparrow
gritty summit
#

I should be running default modlist so i have no idea

wet nimbus
#

I feel bad that my companions have a terrible reputation with me. How can I show Savva and Vanya that we're homies? (will the reputation have an affect on anything)

#

*effect

narrow sparrow
bronze marlin
#

How come FDDA options were removed? Are there any alternatives?

narrow sparrow
toxic mantle
rose pewter
narrow sparrow
rose pewter
#

: ( ok

digital tide
#

I need help with the kar98. in the screenshot I'm holding the gun and it is invisible and I cannot switch guns or open my PDA.

rose pewter
#

I've run into that bug a lot. It happens when you press R while fixing a malfunction I think. Save and reload is the only way I found to fix it

digital tide
#

should i make a new save like run somewhere save and then reload it?

rose pewter
#

Yeah you can just quicksave and then load the save

elder sentinel
#

yeah ive noticed with one of the mp shotguns that it doesnt quite line up right, it gets offset to the left and messes with the ADS

digital tide
#

ill try it

#

just the only thing is I can hold my PP bison and it doesn't do it.

#

same area same time

rose pewter
#

Can you use your Kar98 now

desert gale
#

hi i have problem evry time whene i try open PDA game crash my crashlog FATAL ERROR

[error]Expression : no_assert
[error]Function : CXML_IdToIndex<class CSpecificCharacter>::GetById
[error]File : c:\users\groki\documents\github\xray-monolith\src\xrserverentities\xml_str_id_loader.h
[error]Line : 114
[error]Description : item not found, id
[error]Arguments : sim_default_ecolog_4_default_8
stack trace:

digital tide
#

no I haven't gone to a save yet. but I can hold other guns other than the kar98k

rose pewter
#

Welp I am lost. I thought you couldn't switch guns, but now it's letting you?

digital tide
#

so pretty much what is happening is that the kar98 isn't showing up when I pull it out. but I can have the pp bison out. the kar98k goes invisible when I pull it out and I cannot shoot or switch gun etc.

toxic mantle
wheat wave
north turret
#
  1. Be sure to right click and "Launch as Admin" G.A.M.M.A. Installer.exe and click “Allow Powershell scripts”.
  2. Click “Launch MO2”. Ignore the error message. Click Browse and show the C:\Anomaly folder. Exit MO2.
#

no browse on my installer

#

cant check

oblique plume
hidden junco
#

Aside from the shaders, what are the other performance intensive mods?
First time using Gamma after months of Anomaly. Great and smooth modding, but there are times where it occasionally stutters, and some small fps drops here and there. I'm trying to optimize further without sacrificing much of the graphics.

north turret
#

i get no popup to dismiss when i try to run mo2 on the installer

#

pda has dof applied(?) and the body health system hud is not displaying accurate information

#

just updated to the newest version

hardy moon
#

Hello, how can I disable the looting animation on mutants please ?

shadow sorrel
#

Please anyone, I just reinstalled everything (e.g. did what !delete says). But GAMMA just won't start. If I try to launch Anomaly only it works, but from MO2 nothing works, I only see the GAMMA splash screen

wise pagoda
#

Hey, every time I try and enter Pripyat, the game crashes and I get this crash log: FATAL ERROR

[error]Expression : <no expression>
[error]Function : CModelPool::Instance_Load
[error]File : ..\xrRender\ModelPool.cpp
[error]Line : 120
[error]Description : fatal error
[error]Arguments : Can't find model file 'dynamics\weapons\wpn_p90\wpn_p90_lazer_hud.ogf'.
I am unsure of what to do.

obsidian quest
#

softlocked after killing cherno in hospital how do you resurrect ?

cunning meteor
#

on step 10 and its telling me i need to set up an instance portable

hidden junco
cunning meteor
shadow sorrel
void flame
#

i need some help downloading gamma

dark solstice
#

Hi !
Does anyone know why my flashlight looks like this after latest updates ?

void flame
#

b/c its a bright ass flash light

cunning meteor
#

alright i fixed my last issue but now my game wont even start

wide forge
#

Hello, does anyone know what can i do to open the modpack? seems like MO2 doesnt want to launch the game itself

#

Followed all the steps on the install guide but on startup (On DX11) opens the stalker anomaly loading window and closes itself, i get this error on MO2

[2022-12-10 21:57:25.504 E] [error.cpp:24] Unable to parse file "c:\program files (x86)\steam\steamapps\appmanifest_200210.acf": vdf.parse: unexpected EOF (open key quote?) (appmanifest_200210.acf, line 1)

#

Also this is on Log

#

FATAL ERROR
[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report

dark solstice
late orbit
#

Any idea why my guns sometimes just go away and I cant pull them back out until I reload the game?

abstract harness
#

is there a way to fix this ui from clipping like this? im on ultrawide

oblique plume
#

what im supposed to doooo, fuck this game. It worked just fine and now it is messing with me

#

Who is fucking duty_girl

dark solstice
#

Also, how do I turn off depth of field ? Everytime I try to disable it via the settings menu (I click "apply") it just reverts back to ON.

tender forge
dark solstice
tender forge
#

Thats called busyhands

#

!busyhands

raw raftBOT
#

DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.

If you are still unsure whether you have it or not, try to do any of the following:

  • interact with objects or people
  • use a weapon (you shouldn't even be able to see it when you select it)
  • open your inventory
  • drink/eat/sleep
  • check your HUD in the bottom left corner

If you cannot do any of this, it probably means you do have busy hands.

The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.

Certified DISABLED animations that bring busy hands:

  • Opening/closing backpack and any option related to this
  • Animation for skinning mutants
  • Disassembling objects with Left-Alt pressed
  • Picking up objects where you can see the hand movement
dark solstice
drifting merlin
#

is there any way how to cancel completed job? i have only option Job is done (3x) but i dont want to complete only one - join Freedom 🙂

dark solstice
#

Well...

#

Still can't find it

tender forge
dark solstice
little raptor
late orbit
tender forge
#

@late orbit read above about busyhands
Also no, it won't delete save game as its stored in anomaly folder, not gamma

late orbit
#

okay Ill do full install then

rich imp
#

what does G.A.M.MA companions rework mod do?

wide forge
#

Can someone help me? i cant open the game on MO2

sharp bough
raw raftBOT
swift marlin
#

"The selected profile 'Default' does not exist. The profile 'GAMMA' will be used instead" is this supposed to happen upon first launch of gamma

tender forge
#

As per instructions
Yes

swift marlin
#

alright.

swift marlin
#

im going through the 4th and hopefully last attempt of optimizing everything from start to finish. I have done a full fresh install of both anomaly and gamma, ive got them both in destinations rooted on drive

#

running it once to change cpu affinity first

full parcel
#

Hey i'm in the brain scorcher trying to stop sin from activating it and there's glass shattering sound and my FPS drops so much that it's unplayable

swift marlin
#

okay, so ill explain what keeps going wrong so maybe you guys can help me with why this error keeps happening "Shader compilation failed, check your log file for additional information"

full parcel
#

Anyone knows whats up with that?

swift marlin
#

Should i change my ingame graphics/detail settings all to low before or after optimization steps?

#

because everytime i do it after, "Shader compilation failed, check your log file for additional information" happens

clear prairie
oblique plume
swift marlin
#

I really would like to play this game today, ive been trouble shooting gamma for 2 days now. but optimazion steps are cucking me

clear prairie
wide forge
oblique plume
clear prairie
swift marlin
sharp bough
surreal pond
#

anybody know how to turn off the blur on screen when using healing items?

raw raftBOT
#

It's the new DOF (Depth Of Field) effect. You can turn it off:

  1. Open the game
  2. Go in Mod Configuration Menu
  3. Search SSS Settings
  4. Disable whatever options you don't like and/or move sliders to the left
surreal pond
#

thanks

oblique plume
clear prairie
sharp bough
#

have you updated recently?
@oblique plume

clear prairie
dark ibex
#

MO2 won't let me create an instance for anomaly, please help

oblique plume
#

I didnt remove anything, I just added sounds mod, thats all

swift marlin
full parcel
sharp bough
oblique plume
sharp bough
oblique plume
#

I dont think so

sharp bough
#
  1. Disable antivirus temporarily
  2. Open GAMMA installer as admin
  3. Click "Download G.A.M.M.A. data"
  4. Click "Full G.A.M.M.A. installation"
    We strongly suggest you use mirror 127 or 128 when you do.
sharp bough
sharp bough
full parcel
dark ibex
dark ibex
sharp bough
swift marlin
#

=/

clear prairie
sharp bough
oblique plume
clear prairie
#

it may work this is what i did to fix it @swift marlin

swift marlin
sharp bough
swift marlin
#

im not going to cause an error to happen just to fix it afterwords, when if given the correct instructions i could prevent it

dark ibex
swift marlin
shadow sorrel
clear prairie
full parcel
sharp bough
#

!move

raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
full parcel
#

Thanks for the help thogh

swift marlin
#

how does that make sense

dark ibex
swift marlin
# sharp bough Fix what?

I want to go through the optimization steps start to finish, then I want to load up gamma, and turn all of the graphics settings in game to low or off. (with out it giving me "Shader compilation failed, check your log file for additional information" error)

granite wing
#

is there a way to prevent mouse cursor from escaping out of borders of main screen when i have two connected? Ive tried fullscreen and borderless and it still goes out sometimes Pepega

primal void
#

how to reset gamma graphics to default?

clear prairie
sharp bough
raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
swift marlin
sharp bough
sharp bough
gray galleon
#

how do i set the enabled/disabled mods to the default gamma settings

raw raftBOT
#

Mod list
To bring your mod list back to default, inverting any changes made by you:

  1. Open the installer with admin rights
  2. Click on Only install G.A.M.M.A. addons

Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:

  1. Go in GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata
  2. Copy the user.ltx file you'll find in there (note that every change made by you in your user.ltx will be reverted to default)
  3. Paste this file in Anomaly\appdata
swift marlin
sharp bough
#

eyyyy

gray galleon
#

thank you

swift marlin
#

But every time i try to change all settings to low i get the error

junior hawk
#

Any suggestions for launching with directx 10? Only 11 works. Game is able to launch with 10 but crashes when loading a save or making new one.

swift marlin
#

and then i have to start fresh all over again

sharp bough
clear prairie
sharp bough
sharp bough
swift marlin
junior hawk
clear prairie
#

ymmv

granite wing
#

im mad enough to play with grass shadows on, slider 3/4 to the right and grass height 1.2 dumb

swift marlin
#

i also honestly dont mind old stalker textures, but i also dont know if gamma new textures are higher res and more demanding or not

junior hawk
sharp bough
#

#2 disable this mod 282- GAMMA Loading Screens - CS Eden

swift marlin
#

@sharp bough hopefully following that picture will not cause it to error =/

#

id just like to play the game at bare minimum graphics whith higher than 60 fps and yes i do understand that the shit ton of mods causes that to be an issue lol

void flame
#

can someone hop in support chanel

clear prairie
#

@sharp bough is there a color or tag for people who try to get it working on steam deck?

junior hawk
clear prairie
drifting merlin
#

task for freedom - Storm the enemy, but there is nobody at this point .. tried to sleep on other place, fast travel from locaation to location but still empty and i cant progress that task

swift marlin
clear prairie
#

like helpers are purple, mods are red

sharp bough
worthy karma
#

soo, I don't really know where to ask, but I got a small bug issue

clear prairie
raw raftBOT
drifting merlin
#

!task

raw raftBOT
worthy karma
#

I have this AK 5c and whenever I complete the experimental tracker quest for the scientist in Yantar

#

it disappears

raw raftBOT
swift marlin
#

ty

worthy karma
#

I tried hiding it in a stache, dropping it, etc. But it always just gets rid of the gun

#

I don't know why, but I don't want to complete the quest

#

but the quest item also takes up 5kg of space

primal void
tender forge
#

Dont

If you want to delete shaders cache, you have to delete it from anomaly folder, not from the launcher

swift marlin
#

lol

primal void
#

i had that error before and the only thing that worked for me was deleting the shader cache

keen cedar
#

!shader

raw raftBOT
#

To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.

sharp bough
gray galleon
#

reinstalled everything and this still happens?

clear prairie
worthy karma
#

uh, I'm dum. How do you do that

south forge
#

@clear prairie youre back 😄

worthy karma
#

I also want that gun since I murder so many Sin in the Red Forest for it

sharp bough
raw raftBOT
worthy karma
#

thank you

clear prairie
swift marlin
clear prairie
#

another day another error yep @south forge

clear prairie
raw raftBOT
#

Actual explanation at the bottom but simply put:

Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.

Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.

keen cedar
swift marlin
#

ah okay so i just use dx11 then ty

south forge
#

I used to be able to run DX10-AVX, but i read AVX is for i9's and higher CPUs.

gray galleon
south forge
#

felt like i got better performance with dx10

swift marlin
#

do i need to run MO2 as admin as well ?

clear prairie
keen cedar
void flame
#

can 1 of the helpers hop in the installation support channel

swift marlin
#

"elevation required" cannot start anomalydx11.exe

keen cedar
south forge
#

I have a question about the FDDA mod. but i can wait my turn

swift marlin
keen cedar
keen cedar
swift marlin
#

yes i believe so

keen cedar
swift marlin
#

one sec

south forge
swift marlin
#

D:\GAMMA @keen cedar

#

and anomally is the same

keen cedar
keen cedar
keen cedar
raw raftBOT
#

KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND G.A.M.M.A., DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86

DON'T. USE. THEM.
DON'T.

Moving Anomaly:

  1. Move your Anomaly folder to the new location
  2. Go to your G.A.M.M.A folder
  3. Delete the ModOrganizer.ini file. It should be below the ModOrganizer.exe application

Moving G.A.M.M.A.:

  1. Open your G.A.M.M.A. folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
  2. Move your G.A.M.M.A. folder to the new location

When you have finished moving everything to the new location:

  1. Run the installer as admin
  2. Click on 1. Allow Powershell scripts
  3. Click on 2. Launch MO2
  4. Select your Anomaly folder
  5. Click on Download G.A.M.M.A. data and then click on Full G.A.M.M.A. installation
swift marlin
#

this is what i meant theyre not in the same folder, they're seperate

keen cedar
swift marlin
#

lol ty

keen cedar
#

there you go

tender forge
swift marlin
#

now i gotta make sure what im changing on the graphics listing so it doesnt kill the game again

gray galleon
south forge
swift marlin
#

i wasnt aware that dropping them to a certain value would just kill the game fully

worthy karma
#

is there a bot command to show debug spawn commands?

clear prairie
#

learned the hard way

swift marlin
fathom cairn
#

Hey everyone! I know this is a really vague problem and that finding a solution is improbable but I'm having issues with the game freezing at random times that requires me to end task in task manager. When it occurs, task manager is showing X-Ray Monolith Engine Not Responding. I have 358 mods enabled (I added an extra mod yesterday but I can't recall what it is, some fix I imagine) but I was still freezing before enabling the extra mod.

Could someone direct me where to start troubleshooting?

Thanks!

south forge
#

Separate question: is it possible to run GAMMA in DX10 for better performance? The AVX option works but not DX10 alone, the way DX11 works. Not sure if anyone actually does prefer DX10...

swift marlin
keen cedar
raw raftBOT
#
  1. Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
  2. Open the zip, you'll see 4 folders and a text file
  3. SELECT the content of this archive (4 folders and a .txt file)
  4. DRAG AND DROP the content of this archive inside your Anomaly folder
  5. OVERWRITE everything when asked to do so
  6. Open the installer with admin rights
  7. Click on Download G.A.M.M.A. data AND THEN CLICK Full G.A.M.M.A. Installation

IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png

keen cedar
keen cedar
rich imp
#

in mo2, the folder named G.A.M.MA Disabled, can I enable some of those mods if I like them? or should I stay away from them due to unstableness or anything?

clear prairie
north turret
#

Hi i have a probleme i follow the installation tutorial but i have fatal error

raw raftBOT
#

Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #🤖bot-commands)

What about animations? Can I enable them?

DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.

Why do we have these mods in the mod list if we can't activate them?

Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.

If you really want to use stuff that is disabled by default, forget about #🔨base-gamma-support, use #🔨modded-gamma-support instead.

raw raftBOT
north turret
#

thank you

tender forge
#

wait, aren't we in version 1.0 at this point? where clean list? 😄

keen cedar
#

!1.0

raw raftBOT
#

1.0 WHEN?

Short answer:
When it's done™️.

Longer answer, more informative:
Grok is trying to release 1.0 ASAP, he's working now (as in, he have a real job) so his modding time is limited. For now, he's doing the same things he has been doing for months: polishing, bug fixing and releasing (almost) daily updates.
Also, Boomsticks and Sharpsticks have been updated, this has clearly slowed down the work, because you have to put weapons in loadouts, give them to NPCs, balancing these guns, make sure everything is in place... it's a lot of extra work that is already being worked on these days and for which 1.0 is delayed.
However.
G.A.M.M.A., as it is right now, can already be considered 1.0, because the actual 1.0 will literally just be a more organised mod list (once and for all), so no disabled mods that can harm your game, etc.

As for actually new things to be added, he has already said not to expect the world for 1.0.

swift marlin
#

okay so i just got the error again

#

its something to do with the lighting settings

#

the moment i change it, the game dies what do i do to fix this lol

clear prairie
keen cedar
swift marlin
#

in chat?

keen cedar
#

yes, into Discord

swift marlin
keen cedar
#

Huh, this says it's a shader comp error

swift marlin
#

yeah

keen cedar
#

!shader Start by clearing your shader cache

raw raftBOT
#

To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.

swift marlin
#

i get that every single time

keen cedar
#

Did you change anything about the modlist

swift marlin
#

every time i do it boddies me

keen cedar
#

aaaaand if you don't change anything about the modlist...?

swift marlin
#

im not sure yet, ill have to check one min im launching

keen cedar
swift marlin
#

yep shader comp failed again

keen cedar
#

every time you enable/disable a shader mod you need to delete the shader cache

steep trout
#

any help for this?

keen cedar
swift marlin
steep trout
#

ok i turned stutter and npcs cant see thru foliage on thats it lemme get screenshot

swift marlin
#

Right click Beef's NVG addon, click "reinstall mod" and tick the following options:
Beef's NVG
Beef’s NVG - Patch ES
@keen cedar this is what im refering to btw

steep trout
#

here u go

clear prairie
steep trout
#

yea stutter and npcs cant see thru foliage

#

been working for three days

keen cedar
#

!full

raw raftBOT
#

A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, reinstall and fix them, and any that need to be updated will be updated.

To Perform this follow these steps:
1. Open your G.A.M.M.A. installer as admin
2. Click "Download G.A.M.M.A. data"
3. Click "Full G.A.M.M.A. installation"

keen cedar
#

no need to delete anything

#

lliterally launch installer and click two buttons

clear prairie
#

IN ADMIN mode

swift marlin
#

OH

#

i checked back on those 3 mods with shaders, and now it actually loads up

keen cedar
#

there yo ugo

tender forge
keen cedar
#

yes, Weapon Cover Tilt - do not disable it in MO2, disable it via the in-game Mod Config Menu

#

@steep trout ☝️

#

in any case your actual error is likely a case of a missing file in a mod

steep trout
#

disable weapon cover tilt inside of game got it

#

in the startup menu mod thingy

#

thank u will let you know

keen cedar
#

copy and paste wpn_ump45_sk1_ekp8_18_hud.ogf into the bottom-right search bar in MO2, and expand the folders - what mod is it from?

steep trout
#

will also check that for u

keen cedar
#

i guarantee the weapon cover tilt thing will not solve your crash

#

just an irritation if you play w/ the "NPCs can't see through foliage" mod

steep trout
#

nothing

#

it shows nothing

keen cedar
#

ah, then it's from basegame anomaly

tender forge
#

did you paste into the correct search bar?

keen cedar
#

or that

steep trout
#

bottom right

crude oyster
#
 
[error]Expression    : <no expression>
[error]Function      : CScriptEngine::lua_pcall_failed
[error]File          : ..\xrServerEntities\script_engine.cpp
[error]Line          : 204
[error]Description   : fatal error
[error]Arguments     : LUA error: c:/anomaly-1.5.1.2 (1)/bin/..\gamedata\scripts\_g.script:1445: attempt to concatenate local 's' (a nil value)
 

stack trace:```
keep getting this error even after updating, only seems to happen in labs?
tender forge
keen cedar
#

literally

#

hotfix from 26 Nov

crude oyster
#

i just did ffs

#

i literally wrote that in the message

keen cedar
#

which method - "only install gamma addons" or "full gamma installation"?

steep trout
keen cedar
#

cos at this point you really need a full gamma install to get up to date

crude oyster
#

only gamma addons, per the hotfix. did a full install only a week ago after i had to reinstall anomaly

swift marlin
#

how do i open console in game?

tender forge
#

tilde key `

swift marlin
#

ty

keen cedar
steep trout
#

ok sweet will let you know

keen cedar
swift marlin
#

r2_ssao off when i input this which is what step 8 says, "invalid syntax

keen cedar
#

more than happy for one of the xray wizards to prove me wrong but

#

best i can do is say to upload save files, modlist and crash log here and i can fwd it to tester team?

swift marlin
#

oof gpu is at 100% for no reason

crude oyster
#

ill try google to see if theres any better info on it, ill get back with those things once i learn a bit more

swift marlin
#

sick

#

any way to turn off the new gamma textures? id rather have it run old graphics/textures, it would probably run at a higher frame rate

keen cedar
swift marlin
#

im probably gonna download and install the classic textures and no grass or LODS because better fps peepopray

ornate crest
#

trying to play gamma on steam deck, followed the guide on here but when I start the game I get this error "Shader compilation failed. check your log file for additional information" what do I do?

swift marlin
#

although now that im looking into it, the no grass and lods doesnt say its compatible with 1.5.1v2

keen cedar
swift marlin
maiden beacon
#

I got a problem with my rating and rank, it has stopped going up from around 2800, regardless of what i do

keen cedar
#

soooo why is it an issue if they aren't compatible with 1.5.1.2...?

keen cedar
#

ah

swift marlin
north turret
#

i got no clue whats wrong

swift marlin
#

this one which is in what you posted for me

#

in the textures list

keen cedar
swift marlin
#

ty

north turret
#

my game is downloaded and when i go to start it up it makes the error noise with no message and closes the application

#

anomaly 1.5.2 is installed

keen cedar
#

post your crash log here please. it's found in Anomaly/appdata/logs and is a text document called xray_yourname

north turret
#

the .bkp file

#

or not

#

i did another full install, used my other save and i still get the same crash error

! CreatePixelShader hr == 0x887a0005
! PS:  c:/anomaly/bin/..\appdata\shaders_cache\r4\yuv2rgb.ps\20481111001100000000001000001013310101101000000
! CreatePixelShader hr == 0x887a0005```

does anyone know what "yuv2rgb" is and how i can stop getting this crash error constantly? ty
#

Detected CPU: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz [GenuineIntel], F6/M14/S10, 3693.00 mhz, 32-clk 'rdtsc'

  • CPU features: RDTSC, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, HTT
  • CPU cores/threads: 6/12

Found commandline file!
Initializing File System...
using fs-ltx fsgame.ltx
File System Ready...
FS: 71400 files cached 70 archives, 15547Kb memory used.
Init FileSystem 32.886417 sec
'xrCore' build 8559, Jul 14 2022

EH: 3CAABCFCFF6F3A810019C6A72180F166

-----loading d:/anomaly mod\gamedata\configs\system.ltx

FATAL ERROR

[error]Expression : <no expression>
[error]Function : CInifile::r_section
[error]File : Xr_ini.cpp
[error]Line : 544
[error]Description : fatal error
[error]Arguments : Can't open section 'head_damage_017'. Please attach [*.ini_log] file to your bug report

raw raftBOT
crude oyster
north turret
#

aight ima try again

#

oh i think it worked

keen cedar
# crude oyster ill send my save, modlist, and log here. its bewildering what script is breaking...

like i said - it's a function/script file from vanilla Anomaly and it's trying and failing to call a variable from somewhere. I kept telling you to update because this hotfix from 26 Nov specifically is meant to address your error, down to the line number

#📢announcements message

so if it doesn't work - send that shit along in this channel so I can ping Grok, but I can only guarantee anything will happen if your save and modlist are running on the latest vanilla GAMMA modlist

empty wadi
#

Hi all, I'm having an odd issue where the save/load times in my game have become excessively long. Like 30 seconds to a minute for a quicksave and potentially several minutes to load from the menu or into a new area. Quick loading into the same area is still relatively quick. I've been playing for a week or so and it wasn't doing this initially, save times were a few seconds at most and loading was maybe a minute, tops. I've enabled a few of the optional mods and disabled others, but didn't change anything in between when saving/loading was fast and when it started to get slow. It also wasn't a gradual slowdown, it seems to have gone from being fairly quick to really bad all of a sudden

north turret
#

nvm it didnt work

#

changed the startup screen to say stalker gamma tho instead of anomaly

#

says it cant include the file aug_9mm_new_sounds.itx

#

[error]Expression : I
[error]Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7b281b7aba5>::()::<lambda_00202d6eeafb6968914ca7e0e4d804d3>::operator ()
[error]File : Xr_ini.cpp
[error]Line : 332
[error]Description : Can't find include file:
[error]Arguments : aug_9mm_new_sounds.ltx

crude oyster
keen cedar
#

modlist, i mean

crude oyster
#

ill unpack the anomaly files to get a closer look too, just to see if theres any indications in _g.script itself

keen cedar
#

Unless you can replicate this in a completely vanilla GAMMA game I doubt this will lead to a new bugfix

untold flower
#

i says in mod organizer that i have 416 mods active and the game won't launch bc of it (i assume). yesterday it managed to launch but crashed just as i loaded a new game. anyone knows how to fix this?

crude oyster
#

ive only added some custom weapons, i doubt scripts should be breaking from that. considering only labs have this issue theres something more here

ripe tiger
#

getting this error message trying to load save, and i have a few x's under flags in mo2, what should i do?

keen cedar
keen cedar
ripe tiger
#

nope

north turret
#

[error]Expression : I
[error]Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7b281b7aba5>::()::<lambda_00202d6eeafb6968914ca7e0e4d804d3>::operator ()
[error]File : Xr_ini.cpp
[error]Line : 332
[error]Description : Can't find include file:
[error]Arguments : aug_9mm_new_sounds.ltx
how do i do this

keen cedar
# ripe tiger nope

great! run a full install again - just run installer as admin, click "Download GAMMA Data", then click "full GAMMA installation". I strongly recommend picking mirror 127 or 128 in the gamma installer

north turret
#

might be hard to see

ripe tiger
keen cedar
# north turret

yeah you're missing about 100 mods... time to ofull install again

north turret
#

how

keen cedar
crude oyster
north turret
#

This has been a very crash heavy update. I'm in Zaton and get crashes on a fresh install default settings

keen cedar
north turret
#

not that

#

but how did thes emods not download

keen cedar
keen cedar
crude oyster
keen cedar
crude oyster
past sluice
#

any1 knows if there is a way to enable the debug menu other than in the launcher?

#

because the launcher doesnt pop up for me because the anomaly launcher wasnt working so i replaced it with the gamma "fix" version

ornate topaz
#

Has anyone came across this issue in Darkscape?

crisp cosmos
elfin crown
#

Has anyone had this bug before? All weapon viewmodels are broken ;/

wheat wave
#

? help

novel trail
#

Hi, I'm having trouble with a scientific's mission, the tracking device one, I mange to kill the flesh with the device but it do not drop it

ruby grail
novel trail
#

so, the tracker must be in the mutant

tame sentinel
#

hello, for some reason when i equip a k98 i cant use any guns nor tools in my inventory

#

my char stays like this

autumn lagoon
#

just switched from monitor which is 1080p, to steam deck resolution 1280x800. Now when I click the settings menu, it instant crashes with no error.

soft crater
#

any fix for the 21:9 aspect ratios and shadows/objects disapearing on the edge of the screen?

soft crater
#

you're missing a mod

wise pagoda
#

It seems i'm missing a model file for the p90. dynamics/weapons/wpn_p90_lazwe_hud.ogf I can't load into Pripyat or army warehouses without a fatal error crash. how can I fix this?

novel trail
autumn lagoon
soft crater
#

@autumn lagoon i'm not the guy?

autumn lagoon
#

mb

soft crater
#

well...

#

try setting res to 720p @autumn lagoon

#

still crashes?

#

1280x720

ripe tiger
#

was told to do a full install earlier, did as advised, lo and behold
Expression : D3DX11CreateTextureFromMemory ( HW.pDevice,S->pointer(),S->length(), &LoadInfo, 0, &pTexture2D, 0 )
Function : CRender::texture_load
File : ..\xrRenderDX10\dx10Texture.cpp
Line : 535
Description : The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.

Arguments : c:/anomaly/anomaly-1.5.1.2\gamedata\textures\wpn\wpn_rpk16_reciever_bump.dds

stack trace:

soft crater
#

see if that works so we know if it's the reason

autumn lagoon
#

I'll try

ripe tiger
#

laptop 3070

soft crater
#

okay probably you haven't applied the 1.5.2 mod

ripe tiger
#

game was running fine, lowered some settings to get better fps, and suddenly this

soft crater
#

your anomaly folder is 1.5.1.2... kinda weird

soft crater
#

hmm

#

like your GPU is crashing

ripe tiger
#

i lowered the view distance and grass density iirc

soft crater
#

when does it happen

soft crater
ripe tiger
#

immediately after loading a save, when the "enter the zone" prompt should show up

soft crater
#

highly likely that you're either overclocking your GPU or there's a driver issue

ripe tiger
#

ill see if i need an update or smth

soft crater
#

DDU, and the install latest Nvidia

#

DDU is display driver uninstaller

#

and also, delete shader_cache folder in the appdata folder in anomaly

ripe tiger
#

k

#

looks like i did have adriver update

soft crater
#

I doubt that fixes the issue, just an update

#

should be fine without updating for a game as old as this

#

but who know

ripe tiger
#

i don't understand ho it crashed after a lowered settings tho, thats wack

thick cedar
#

I cant get the game to launch it just crashes can anyone help in a discord channel?

sterile cedar
#

I think my whole save is busted.

Been playing for a while with only 357 mods enabled, Hips quest doesn't work and Ecologists don't sell the Artefact melter

true willow
#

Hi i did the download and followed the install instruction to the last bit but still i get CTD without any pop up

#

Can anyone help a fellow gamer?

#

I have 357 mods active

steep trout
true willow
#

Anomaly without G.A.M.M.A. starts no problem

ripe tiger
true willow
#

When i start it with admin permission i get this: