#🔨base-gamma-support
1 messages · Page 213 of 1
are my mods complete now? Did the install, all virus stuff off, ran as admin.
Anyone?
Still got the scope problem btw
So I'm running into a issue rn. Randomly the game freezes and about 5 seconds later goes to black screen. Cant undo the freeze and have to manually quit with task manager.
And the scope problem persists even if I start a fresh game and debug it in
}
Hello guys, need a small help. How do I unjam weapon with mags redux addon on? Obviously, Unjam Reload addon is disabled, and Z stated in the #│💻keybinds-in-gamma is not working.
Re-binded reload to R, also
Oh, and also: shouldn't ammo check from Ishmaeel, included in GAMMA, have custom animations for checking ammo count?
Fire anomaly are invisible for me, I can see the embers but when I walk in to them/throw bolt nothing happens I just take damage.
Fresh install 348 mods active I haven't added or changed anything from default settings (DX11)
nope, mods are still missing... They are all disabled mods, but it might mess with load order 
which is what might be causing the issue
is that really post crash?
custom animation is disabled due to the bug known as !busyhands (type that in #🤖bot-commands for more info)
For unjaming, you need to set the keybinds yourself, either in MCM or in settings > keybinds
How would i fix missing mods? I'm sure I'm following the install process accurately.
what is your antivirus?
Just default Windows stuff. My pc is a very clean install. Not much on it. And I completely disabled it for download and install.
Eh, looking for that for over 10 minutes already in the MCM, and it's definitely not in the main settings
sooo, windows defender?
Obviously, unless I'm blind, which probably is the case
Yeah
it should be in the first or second bar. MCM keybinds
did you press "Download GAMMA Data"?
Yep. Everything according to the instructions.
Well, it's in the settings. Nevermind then, thanks!
check moddb.com to see if you are flagged as a bot
if you are you will see a big red screen
Checked. I'm not.
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
Do this again, but use the 128 mirror
maybe it will help 
I'll give it a go now. It'll only be my second time this hour so hopefully I don't get flagged.
Does anyone have Dr. Alexei Markov's ID? I am stuck in a loop where Dr. Pirogov was dead, thus instafailing Markov's quest. When going back to Markov after spawning Dr. Pirogov, he is no longer in Yantar.
Redownload most likely
check moddb.com to see if you are flagged as a bot
big red screen if you are
!npc
Is he part of that list?
Sadly no, neither of the doctors are. I got Pirogov's ID from another person in discord
wait for the time to run out, it should say for how long.
an hour
Recheck after the time is up just to confirm that you are unblocked and do this
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
wilco
who and where is he on the map exactly?
Yes
I have 340 Active mods instead of 348 after a full install, how can i fix it? Also MD5 Check says everything is ok?
Dr. Markov, an ecologist in Yantar (i believe the full name is Alexei Markov). He was normally walking around the science base in Yantar before disappearing. Other users also seem to be having the same issue in the past (might have been killed, idk)
answer that
#🔨base-gamma-support message
i close it, do you need it post crash or its ok?
just post it
Yep, im flagged
wait out the timer and do this
#🔨base-gamma-support message
Either wait an hour (or longer), or use VPN
Thx, going to wait and try that later
aight good luck!
oh please take over @astral condor I wanna go to bed 
Oh god you're asking me to take over at 4 AM
Same timezone gang yooo
I'll take over 
ah_yan_markov
lol
My night vision goggles aren’t turning green when activated
"gamma won't launch because you need a bigger mouse your mouse is tiny thank you."
Thank you so much! appreciate you guys stayin up till 4AM ❤️
get on it @abstract lava !
#🔨base-gamma-support message
Another helper?? 
Have you tried changing the battery
buh... this maybe?
!shader
To clean your "Shader Cache", don't use the option in the Anomaly launcher.
Go in this folder: Anomaly\appdata, you'll find a folder called shaders_cache, delete this folder and launch the game normally from MO2, using your preferred DX.
what does it mean when it says "file does not exist" (specifically dx11 avx) when trying to run the game?
If above ^^ doesn't work, open your MO2 and look for Beef's NVGs, see if it is installed
trying to help a friend install, never seen this message before
Yea still won’t work have to load back to when they worked last bout 15 mins ago not too big deal
Oh that just means you're missing AnomalyDX11 AVX for some reason
Wait hang on
i don't understand how it could be missing though, the rest of the install seemed to be fine from what i can tell
Navigate to here
Copy paste everything in bin to your Anomaly/bin folder
Or if you just want an easier way
follow this
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
alr ill let em know, ty
LMFAO YOU MF

I'll kill you
so it goes into the anomaly folder itself, not the bin folder then?
I'll help you do it 
Nooo you're too valuable ily <3
Hey Richy maybe you can help me. I have a problem with one scope, it displays like this: Things I've tried: sss setting, reinstall anomaly, reinstall gamma, reinstall gamma with mirror 128. This one scope refuses to display correctly. Everything else is fine. This happens on my 100hrs+ save and on a new save, and happens with the specterdr kit as well as just the scope. Help me, obiwan, you're my only hope.
rlly gotta threaten mangun like that
It has this weird vhs effect to it?
he said something reprehensible about the condition of my barrel
Or is that compression lol
it's just a shitty texture version instead of the dynamic version it should be like all the other scopes.
Wha scope is that
specterdr elcan
Okay lemme think rq
all the other fancy scopes work just great, but this one looks like a texture
it used to work fine on this save before the recent update (not the hotfix, the anniversary update)
It might be that BaS scope extravaganza got effed up
Looking for it rn in the GAMMA RC3/mods folder
You can look for it too, if you find it, delete it
then open your GAMMA installer > Full install
These
@astral condor allegedly it doesn't seem to have fixed the problem, dx11 doesn't work either
genuinely don't know how it happened since i didn't get this error myself
Can you send me a screenshot?
What is sending which error
cuz that may have major differences
this is what their mo2 looks like, best image i could get
I'll try that cheers
delete ModOrganizer.ini in the gamma folder
and launch MO2 again
can someone help i do not know why my game wont lauch
i activated magazines and ammo check
flagged as bot by moddb, retry full gamma install in like 2hoo ? before all that > antivirus totally off.
dem
i... know... 😄
should i wait it out or something?
as said... ?
You're missing mods, check moddb.com if you are flagged, if not. Disable antivirus and do this
or onion routing if you're a maniac
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
Now, I sleep

i also found that using any other servers to dl the mod can just get you flagged, so even if you are in E.U like me keep default modb server into the gamma downloader.. will be longer but.....

Ok thanks
RAPTR shotgun suppressor doesn't have any noise. Does anyone have the same issue?
so if i open a vpn and redownload it will it work?
alr, that seemed to have solved the file not existing thing, but now it does this and then closes the window
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
yeah thats the same issue im having
Do it again, yeah
a fews weapons missing the shooting sound..
like vintorez/ppsh..
Thanks bro!
maybe you will* have the sound for vintorez/ppsh who know ? for me nope... those 2 weapons only. and no pb.
doesn't seem to have worked yet again
should they just try reinstalling again? i was planning on guiding them but they did it without me so
Yeah I have sounds for those weapons however when I install the suppressor for the RAPTR the only sound is the rounds impacting
i have a feeling something was missed along the way
No no, they must have effed up the copy process
because it's literally just a PNG file that's the indicator
yeah impact sound but fire like nothing... strenge..
am I allowed to send vids here? My problem is best exemplified with a video.
they're telling me they just copied the folders, and then replaced the ones in the anomaly folder when prompted so idk what could possibly be wrong
send the screenshot of the anomaly folder
Why isn't this person here
I can't use the mousewheel to scroll through the loadout menu at the start of my game. If I do, the second I click, it takes me back to the top and selects that rather than what I was trying to select. I can use my cursor to just scroll on the sidebar, but that's inconvenient. Any fixes?
btw maybe you know ,everythings works fine, but some weapons like vintorez/ppsh are missing the fire sound only impact sound and reloading sound are working, any idea ? @prime fulcrum
corrupt mod
they're not particularly talkative in servers so ive been getting the support for their issues on their behalf
reinstall all mods i guess

wich mod is responsable of weapons sound plz ?
no idea
I have a situation where freedom squads get stuck in this position in army warehouses. they wont move,
not all mod dont want to destroy everythings just for a fews missing sound tbh.
launch installer as admin - MD5 check
this will just check for mod and wont re download anything else right ?
yes
looks the exact same as mine
tell him to open MO2 and click on those gear icons on the top left
and screenshot that
is this correct?
what the fuck
well guess what
your friend installed 2 anomalies
for some reason
w
!!! MD5 Hash Test is finished and 0 errors have been found!
Search for !!! in the log file created next to this installer to see which add-ons might be corrupted.
It is also possible that they are simply not up-to-date.
Download the flagged (!!!) add-ons archive manually from moddb and move their .zip to the GAMMA/downloads folder,
then launch Update GAMMA data > Complete GAMMA installation to fix these addons installation.
I still have no fire sound for ppsh/vintorez....

he has to use the "anonllufu" folder
you can see it in the path here
paste those 3 folders into there
Ay im reinstalling GAMMA and anomaly gives an error messages when i try to launch it "D3DCOMPILER_43.dll was not found" how fix?
hello, after updating today (havent played since before 1 year anniversary patch) my Remington 700 with the MOD-X kit now doesn't make any gunshot sounds with a suppressor on. is there a known fix for weapons missing gunshot noises?
any idea what could cause this?
have a fews weapons with the same problem...... vintorez/ppsh...
!dependencies
Required dependencies are:
Powershell 5: https://www.microsoft.com/en-us/download/details.aspx?id=54616
Microsoft Visual C++ Redistributable: https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
DirectX Runtime Web Installer: https://www.microsoft.com/en-us/download/details.aspx?id=35
Microsoft .NET Framework 3.5: SEE SCREENSHOTS BELOW
https://media.discordapp.net/attachments/1026780041461366804/1031260469379481721/explorer_qdRoVRPdde.png
https://media.discordapp.net/attachments/1026780041461366804/1031260469794713620/explorer_u6Xg5afeY4.png
https://media.discordapp.net/attachments/1026780041461366804/1031260470147039372/OptionalFeatures_XMcINlk8K4.png
cause what
the blue arms. usually caused by corrupted textures, reinstall the mod responsible for those textures
if it's just the arms, probably THAP, if it's the legs then Body Awareness
@keen cedar and about fire weapons sound missing ? ...
have you launched the game at least once already?
reinstall the mod responsible for the weapon's fire noise
is there a difference between "Grulag's Dead Bushes" and "Grulag's Dead Bushes - Grulag"? One is disabled and one is enabled lol
which, no, i do not know what they are off the top of my head
good to know im not the only one experiencing it, the new echoing and distant shot sounds are amazing, but it kinda sucks not being able to use my M700 suppressed.. bcuz immersion > gameplay : )
yeah agreed with you... did a md5 check it said all good funny ..........
seems they added mod without knowing that they would fuck up other mod.
dumb question, but is there a reason for two of them existing?
@quick nebula for some people all good for others > missing sound -_- its magic bruh.
yeah i do
!new @tardy spoke
YOU HAVE LIMITED ACCESS TO THE SERVER.
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge -🔰- near your nickname and (rightly) don't understand why half the server is gone, carefully read here:
#❗❗newbies-read-this
holdover from older versions. the latest version of gamma has it as "272- Grulag's Dead Bushes - Grulag". i have deleted the unnumbered duplicates on my install personally
alrighty, thanks
after you remove the role check #custom-textures and posts under tag "Graphics" in #1035807043933720576 @tardy spoke
yeah yeah i figured it out
BTW, while this isn't "default" modlist, do you know where the ghillie suit overhaul should go in the load order or category? It's the only mod I have added outside of default GAMMA
#🔨modded-gamma-support and no, i don't
@quick nebula the mod that cause missing fire sound is >>> 274- Dark Signal Audio Pack - Shrike
disabled that mod started a new game fire the ppsh, and its magic fire sound present, re enabled the same mod and its magic again fire sound missing.
you probably can fix this by reinstalling the Dark Signal Audio Pack
https://www.moddb.com/mods/stalker-anomaly/addons/dark-signal-stand-alone-weapon-audio
Download the mod file(s) from moddb. DO NOT EXTRACT.
Place them into yourGAMMA\downloadsfolder. Overwrite if needed.
Run the GAMMA installer as admin.
Click the "Download G.A.M.M.A. Data" button.
Click the "Full G.A.M.M.A. installation" button
My game consistently (across 3 attempts) crashes when I try to clear out the military checkpoint south of the rookie village. Similar error in logs each time:
/////////// Stalker Hit registered: GBO v1.6.6 //////////////////
army_south_mechan_mlr19158 about to be hit by actor in bone 34
Custom bone found. Loading custom_bone values
ammo_12x76_zhekan shot with wpn_toz34_obrez_custom, Weapon power= 0.77, AP power= 0.23, Hit multiplier= 2.5, Air res= 0.6, Distance= 4.8745913505554 m, Barrel condition: 0.96
Bone hit= bip01_r_upperarm, Bone damage mult= 0.8, Bone AP scale= 0.75, Bone hit fraction= 0.3, Bone armor= 0.052988227705
Real AP power= 0.17851444509004, Bone armor after hit= 0.052988227705, Damages inflicted= 1.3147976398468, Remaining health= -0.52161240577698
! ERROR on rejecting: entity not found. parent_id = [19158], entity_id = [19163], frame = [78252].
Time continual is:825849
/////////// Stalker Hit registered: GBO v1.6.6 //////////////////
esc_3_16_military_trader19165 about to be hit by actor in bone 22
Custom bone found. Loading custom_bone values
ammo_12x76_zhekan shot with wpn_toz34_obrez_custom, Weapon power= 0.77, AP power= 0.23, Hit multiplier= 2.5, Air res= 0.6, Distance= 9.4321193695068 m, Barrel condition: 0.96
Bone hit= bip01_l_forearm, Bone damage mult= 0.7, Bone AP scale= 0.75, Bone hit fraction= 0.3, Bone armor= 0.091775532425385
Real AP power= 0.17614085528142, Bone armor after hit= 0.091775532425385, Damages inflicted= 1.1351512670517, Remaining health= -0.41560399532318
! ERROR on rejecting: entity not found. parent_id = [19165], entity_id = [19170], frame = [78420].
stack trace:
at address 0x000000014014E0AA
of course this isn't exactly game breaking as I can just...not do that, but I'm concerned there's some other issue with my install/save that might cause other problems later on. look familiar at all?
trying something first then i will try your solutions.
are items in stashes truly the cause of increasing load times? i swear running the game on a hdd i get the same load times as my nvme
Is there a place i can redownload all the things inside of modpack_patches without needing to download the installer again? I may have moved it without backing it up by accident
no, it's just the GAMMA RC3.7z file
just going to delete that mod from mods file and drop the one i download, not gonna fuck up everythings again by clicking full gamma install again... everythings very stable now except thosee missing fire sound. thx.
corrupted mod, reinstall all mods
delete contents of folders "downloads" and "mods" in your gamma folder
and then
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
!backup if you want to save settings
"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message
my SKS wont ADS/ it does the CSGO shoulder zoom. how fix?
I did as you suggested. Deleted those three, got data, reinstalled, scope bug still there... Here's the specterdr looking shite, and the MarchF scope looking regular @astral condor Maybe @keen cedar would have a suggestion?
bump
Have you pressed V?
hello! so i thought my game was crashing when i fired my weapon but now it appears to be specifically happening when i kill this NPC. 'since it also does it when i stab him dead lol'
now im not sure if its due to this particular NPC tho since its randomly crashed before while shooting at/killing other NPCs. BUT he is a quest related NPC that has been following me around and now has started shooting at me for "no reason," far as im aware
I've been downloading gamma for well over 12 hours now and according to what I see on Reddit and here I'm in the minority on this one, Seems my download speed just won't go above 2Mb/s
go to mod configuration settings, drop condition, and untick the spawn old ammo box, just in case it's ticked. Old ammo was causing me crashes when someone with it died.
yo thanks boss. ill try that out
ok theres a dont spawn old ammo option. im assuming you mean to tick that
must've changed since then
yep. you dont want it spawning basically
Sorry to hear that. An experienced helper will likely be around soon.
np thanks man!
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
is the progress bar even moving?
Yeah about around 40 ish %
wait, is it your first install 
Yep
why did you remove your newcomer role
is this right?
guess i should've tagged you and not the bot lol
Nothing there was helping me so i hoped to get some assistance here
!new
YOU HAVE LIMITED ACCESS TO THE SERVER.
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge -🔰- near your nickname and (rightly) don't understand why half the server is gone, carefully read here:
#❗❗newbies-read-this
it's literally written everywhere that you should NOT remove it if you haven't launched the gamr yet
anyways @agile quail you can restart the installer
get the crash again and post the log again
ok will do
screenshot your MO2
hey, anyone in here know the load order? i have 382 mods active instead of 348, dont know what to turn off
my game's started crashing after the update, new save also crashes me out
last question then i should be good to have fun with gamma finally.
How to remove weapons blur when using nvg ?
Hey, anyone know how to fix this fatal error?
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
@long surge in filter type agressor and you will see that uggly reshade pop, then > off.
if its Agressor Reshade - Awene it's already disabled
i tried launching mod manager as admin and launching the game, this error pops up
if it's not Agressor Reshade - Awene i'm to dumb to find it
How do i enable the newly added mods from this update?
screenshot MO2
you don't know how NVGs work irl?
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
yeah i still don't know about this Agressor Add-on.. I'm to dumb to find it if it's not the Agressor Reshade.. but this one was already disabled by it's own
its... just a game and blurry weapons make it harder to aim enemy.
Hey does doing a full gamma installation enable the new mods or nah
then don't use NVGs 
or get a better one
amazing support thanks.. already have level 2 nvg..
yes
also there's an anomaly mod with some really sweet radio music on it, can i just paste it into vanilla anomaly gamedata and it will work with gamma?
mr moderator can you also check out my message in #🔨modded-gamma-support
is there smth wrong with my mo cuz i did everything proper i think
@timber spear
ight will try
it said that everything was already up to date or something and it's running through all the mods now
is the error message some kind of issue with how the mods were installed
might be
is your username literally just yummy furgal
yo my game be crashing when going to shutdown brain scorcher?
like very consistent walk through specific doorway and crash happens
now i get a different error, based
screenshot MO2 again
apparently
ok wait 30 minutes and check if it's gone
i got blocked when i installed it first time as well
do i do the same reinstall thing again
if the red screen will be gone then yes
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
i refreshed moddb and it lets me into the site, still red xs tho
anyone know how to get the backpack anims for drugs and food cause when i get on mcm fdda theres only item anims and no skinning backpack or pickup
What prio should the classic texture have? And still... where can i find this damn Aggressor Add-On if it's not the Aggressor ReShade?
also i have the gamma mod organizer stuff in a different folder than anomaly, is that whats causing it
!full again
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
!fdda
This command is specific for a specific kind of crash, but it's good in any case to remember an important lesson:
If you enabled ANY FDDA animation, turn them all off.
Yes I'm talking about backpack, crouch, mutant loot and items pick up. It's causing your crash. I don't care what you think it is, it's FDDA. Turn that shit off.
The only thing you can keep enabled is the first option: Enable FDDA animations
don't
that's how it's supposed to be 
wait so fdda animations make you crash?
Does doing "full install" on gamma remove custom added mods?
reinstalled the game still getting this
ERROR: Exception calling "DownloadFile" with "7" argument(s): "An exception occurred during a WebClient request."
ERROR: At line:59672 char:3
ERROR: + $net.DownloadFile($url, $destination, '', '', $true, 500, [Mi ...
ERROR: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ERROR: + CategoryInfo : NotSpecified: (:) [], MethodInvocationException
ERROR: + FullyQualifiedErrorId : WebException
ERROR:
ERRORS:
Unexpected end of archive
ERROR: Data Error : gamma_large_files-main\G.A.M.M.A. Large Files\gamedata\meshes\dynamics\weapons\wpn_aek971\wpn_aek971_usp1_hud.ogf
go to moddb.com and screenshot
yes
yes
any help in regards to this?
i tried it, same error as first time
bruh
find the file called items_anm_take.LTX in \gamedata\configs\items\items, open with
notepad and add a ! infront of the first line [item_ea_take_hud]
💀 I havent crashed 10 hours into this game so far its not really about crashing i just want to know how to enable backpack anims on mcm cause its not there if that causes me to crash i can live without them
??? i said that fdda crashes the game
wheres that, the mo folder?
?
and corrupts saves
anomaly
Check in the gamma folder?
wait a minute, it was trying to launch my og anomaly modded folder
well it launches now after i redirected the folder but it launches the vanilla game
wha
I'm crashing as a psy storm starts up. . .
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: .../bin/..\gamedata\scripts\zz_surge_manager_npc_die.script:76: attempt to index global 'surge_manager_ignore_npc' (a nil value)
Logs show fatal error, anyone know how I could resolve this?
i have it set to this now and it straight up just opens vanilla anomaly
!surgecrash
If you crash with this error during an emission: surge_manager_ignore_npc
- Open your mod list
- Find
265- NPCs Die in Emissions for Real - Right click on it, click
Reinstalland thenReplace
delete ModOrganizer.ini in the gamma folder
! ERROR on rejecting: entity not found. parent_id = [19652], entity_id = [19655], frame = [32418].
stack trace:
at address 0x000000014014E0AA
Soooo i had this now? Crash
Shoot an Freedom member in army warehouses
was it a trader/mechanic?
Uhhhh
/////////// Stalker Hit registered: GBO v1.6.6 //////////////////
mil_freedom_medic19652 about to be hit by actor in bone 21
NPC visual model: actors\stalker_freedom\stalker_freedom_solid
ammo_9x39_pab9 shot with wpn_vintorez_m1_specter, Weapon power= 0.7, AP power= 0.3, Hit multiplier= 0.95, Air res= 0.55, Distance= 34.018901824951 m, Barrel condition: 0.99
Bone hit= bip01_l_upperarm, Bone damage mult= 0.8, Bone AP scale= 0.8, Bone hit fraction= 0.45, Bone armor= 0.15
Real AP power= 0.28754508035305, Bone armor after hit= 0.15, Damages inflicted= 0.56090462207794, Remaining health= -0.26163473725319
! ERROR on rejecting: entity not found. parent_id = [19652], entity_id = [19655], frame = [32418].
stack trace:
at address 0x000000014014E0AA
Is it in there?
I'll try kill him again and look at his symbol on the minimap
i tried opening the actual game file and it again launches the vanilla anomaly
It was the Medic Solid. I killed him again without a crash
!full
oh wait
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
hello, i am crashing when in lab x19 after walking through certain doorway.
! [LUA] SCRIPT RUNTIME ERROR
! [LUA] 0 : [C ] __concat
! [LUA] 1 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(1445) : r_float_ex
! [LUA] 2 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts\grok_bo.script(178) : func_or_userdata
! [LUA] 3 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts\axr_main.script(271) : make_callback
! [LUA] 4 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(119) : SendScriptCallback
! [LUA] 5 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(1235) :
! [LUA] d:/games/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
! [LUA] 0 : [C ] __concat
! [LUA] 1 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(1445) : r_float_ex
! [LUA] 2 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts\grok_bo.script(178) : func_or_userdata
! [LUA] 3 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts\axr_main.script(271) : make_callback
! [LUA] 4 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(119) : SendScriptCallback
! [LUA] 5 : [Lua] d:/games/anomaly/bin/..\gamedata\scripts_g.script(1235) :
! [SCRIPT ERROR]: d:/games/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: d:/games/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
stack trace:
^ not sure what to make of this
alright bro it works now ty, how to turn off the body health stuff?
!bhs
In order to safely disable BHS, you'll need to disable Body Health System and G.A.M.M.A. Minimalist HUD in your mod list.
👌🏿
That fixed the crash but now my fov get set to 50 everytime I use my free zoom key
yan_ecolog_semenov_squad
alright it works great now but i just want to completely turn off identification ui and mcm doesn't seem to let me, when i tried in the mod manager it just crashes my game now
is it bad to do the MD5 check?
so i have 346 active mods. the game launches and plays, but it crashes when i try to unholster my SKS
I am crashing everytime I try to run and open gamma
any tips or anything ?
- Detected CPU: AMD Ryzen 7 3700X 8-Core Processor [AuthenticAMD], F15/M1/S0, 3601.00 mhz, 30-clk 'rdtsc'
- CPU features: RDTSC, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, HTT
- CPU cores/threads: 8/16
Found commandline file!
Initializing File System...
using fs-ltx ../fsgame.ltx
File System Ready...
FS: 59676 files cached 67 archives, 12725Kb memory used.
Init FileSystem 5.203672 sec
'xrCore' build 8561, Jul 16 2022
-----loading c:/anomaly/anomaly-1.5.1/bin/..\gamedata\configs\system.ltx
FATAL ERROR
[error]Expression : I
[error]Function : CInifile::Load::<lambda_3825c94a055ba8c00128a7b281b7aba5>::()::<lambda_00202d6eeafb6968914ca7e0e4d804d3>::operator ()
[error]File : Xr_ini.cpp
[error]Line : 332
[error]Description : Can't find include file:
[error]Arguments : sound_layers\wpn_AR_sounds.ltx
stack trace:
cant change any of my r2_sun_lumscale setting any one know whats up with that ?
dynamic tonemap ON ?
FUUUUCKKKK ... sry my bad man .....
you cant know if you dont know, dont be sorry.
^^
i just installed everything according to the guide, whenever i create a new save and loads into the game, it crashes before i even see the game, right after the loading screen (after the loadout screen)
! [SCRIPT ERROR]: d:/anomaly/bin/..\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: d:/anomaly/bin/..\gamedata\scripts\grok_spawn_lights.script:59: attempt to index global 'placeable_furniture' (a nil value)
i've tried looking for info about this error and couldn't find any :\
Mine is reading that file 'D: \Anomaly-1.5. 1.2\bin\AnomalyDX11.exe' doesn't exist.
Crashing for a variety of reasons at times.
Most recent crash was when I shot a bandit technician in the Dark Valley, past crashes were at dead city on escort missions, thinking having companions cause issues or something
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
Hi, I finally updated my instance with anniversary patch and hotfixes, but now my game runs painfully at 4 fps ingame, also 10 fps in main menu, option menu while ingame is fine tho...
348 active mods, used to run at 60 fps stable
THanks : )
screenshot your MO2
there is a way to completely disable reshade?
as to just not launch with the game at all?
screenshot your MO2
did you backup your settings before updating?
remove the dxgi.dll in the anomaly/bin folder that should disable it
i will try that out
Is it normal that after the update it shows 333 active mods instead of 348?
Do I need to activate some myself?
never activate mods yourself, unless you know what you're doing
!modlist
send that
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
corrupted mod
huh, i just downloaded all the files and installation everything this morning
i will try this out, thank you so much
!full do this
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
I did yeah
#old-framerate-optimisation then, turn off 3 mods
it's in step 3
Nvm, after restarting my pv everything is back to normal somehow 🤔
thanks for your help 👍
still having same issue
Check if you can access moddb.com
I cannot
wait for the indicated time + 30 minutes
so wait 30 mins and the repeat the same process?
Look at website, it tells you how long to wait, then add 30 min
it seems to have worked! thank you so much
Hey does anyone have issue with looting corpses? After i loot a few there is some strange bug that doesnt allow me to access inventory of others, turn on debug mode or anything else, i press F on the body, get stash coordinates and cannot loot the body
if it's framerate issues
#old-framerate-optimisation
wut?
Like i said, i loot a few corspes, then when i wanna loot another one, press use key on it, it doesnt open the inventory at all, cannot fast travel, daddysave or anything, i need to go to campfire, save, load save, and then i can access it
i can even make a short video in showcasing it if you want
collapse all the categories and screen cap MO2
its before update to 348 mods
didnt do it yet as its full download and i play too much lately xD
yea, well do the update if you want support, there were issues that were fixed in last patch
Oh okay
i experience those issues in every patch in gamma tho XD
But ill trye
and comeback when i do update the game
well, when it's up to date we can work on it
!hud
Can't see the HUD anymore?:
Press Numpad Enter.
Your HUD looks strange?:
1) Load a save before this bug happened.
2) Press Enter on the Numpad (if you don't have a Numpad, turn off HUD in your game settings).
3) Press H on your keyboard.
4) You should have no HUD now. Try transitioning to a different location. HUD will get re-activated and fixed.
Hello. Every Time i start a new Game and Selectet my Items, then Press Start game, it Pops me back to Desktop. Can someone Help`?
!crash send the crashlog
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
what?
send the crashlog so i can see whats causing the crash
there is no Crash log or where do i see it?
follow the steps from the bot message
kk
!bas do the steps below
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
So my game just crashed twice in a row and I've also been getting the gun jam disappearing bug, my. But I did just notice the discord says 348 now and when installed last week it was 346? Is there an update or something?
Yes. check #📢announcements for when an update goes live
💔 BROKEN HUD/HEALTH BAR 💔
when transitioning from the garbage to the cordon.
I have a save just before transitioning.
I reload a multiple time the save before the bug, exit the game, restart the game, reload and transitioning again... but the "dead health hud" comeback every-time.
I try "!/hud" (bot command explanation) in that discord : by deactivating the HUD and transitioning why no HUD, but the bug come back every-time i go to the cordon.
But if i go in other place, no pb, no bug !
Other pb occur with this bug : i can not transitioning again (go back to the garbage) no loading, "shift" key for moving something in the inventory do not work anymore...
Don't understand what's append, if someone have any idea. 🙏
PS. i had "simple vision" mod activated (with the gamma patch) when this bug occur, i try to deactivate this mod and its patch, but no change... i still have the bug when transitioning to the cordon 😭 !
Ok thanks, sorry so just so a full install in the installer? Don't have to uninstall or anything? Sorry not familiar with mods.
in the previous area, did you by chance have a near death experiance? Legit question
For this update
Open the installer as admin
Download gamma data
Install gamma addons
Awesome thanks bud
nope, 94% of life
The entire time? Or did at some point you almost died?
Ok I did what you said and it says 373 now instead of 378
so does anyone know how to decrease gamma in gamma? i play with windowed borderless, and changint to it makes everything washed out and having like a bright filter.
I'm sorry I meant 347
One hour ago in the garbage i had a near death experience, with spy issues (spy zombi)... but did not die.
Use a lot of medecine and regen my entire life... finally go thru the garbage, and the bug occur when exiting from the garbage to the cordon.
!modlist send the modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
In the chat?
that might be the possible issue. That bug usually occurs after you ALMOST died
follow the guide the bot linked and send it here
!modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
Looks like the loading screen mod is missing. It shouldn't cause any issues though.
Ok cool thanks
i try something
found a save before the "nearDeathXp"... run thru the garbage to the cordon...
The reshade was included in the update right I don't need to download it somewhere else?
nope, it don't work !
broken health" bug when i arrive in the cordon
yes its included
Try fast traveling into Cordon
do you have unlimited stash weight on?
i don't think... i try to look at that.
can't find this option (mcm menu ?)
in MO2 Unlimited Stashes Weight
i've never fast travel... i don't know how to !
My game is still crashing like 15 second in before and after the update
!crash send the crashlog
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
not activated
Open PDA map, right click a small green house symbol.
Costs a fair bit of money, but just do it to test.
If you can't click, disable areas on the map
well... There is a fix for a borked Health hud.
If @junior moon
fix don't work, try this
Update GAMMA. Load a save where your HUD is normal. Go to Settings, hide HUD, save changes. Travel to a new area. Go to Settings and turn your HUD back on.
Thank you very mutch, worked ❤️
ok i'll try to hide the hud AND save. check !
I have had a suspicion for a while, I think the Coron side of the transition between Cordon and Garbage can cause enough lag to cause busyhands.
detective bean is on the case, I see
yes its occur only when going to the cordon.
I've already have this bug 3 days ago... same way. Finally restart a save before the bug and i haven't been in the cordon.
You crash when loading the save?
Try to fast travel into Cordon though, need to test
No I load get in game and can walk around for a bit before the crash. It first happened in the middle of a firefight and then just started crashing every time after that
hello! I have been using the unjam weapon animation on the same button as check ammo, its quite nice and makes it more immersive, especially on shotguns like the remington 870, unfortunately not every gun has this idle check for jams animation and im wondering how i would go about using some of the existing animations on these guns
!debug Do you have debug enabled? If not follow the guide to enable it
How to enable debug mode: #╭📖faq message
save (be4 the bug) is loading....
enable checking animations at your own risk, they can completely break your save
!busyhands
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
I did not actually enabling and launching gamma now
When ingame press F7 and in the console that will come up type release_id 47109
travel from the garbage to the northenfarm.... and it don't work !
i have to go for half an hour, comeback and try something else after. i'll tell you !
My game will not launch not launch all I get is the gamma starting screen for a second and then the windows sounds plays and it crashes with no error
screen cap MO2
i will take an old save from before my near death xp, from Rostok and try to fast travel to the cordon... not passing by the garbage.
but the unjam animations came stock enabled with gamma! im just curious if i can use those animations, which have been just fine, on other guns that dont have animations at all like the ks-23, and how i could go about trying that
missing mods, check moddb.com if you are flagged as a bot
If you are it will be a big red screen
I am I've been waiting time just keeps going up
if they aren't enabled, it's for a reason
and im willing to test that for myself
well... Either use a VPN or wait until the time is up
Appreciate ya
your funeral. I think you can reenable those animations somewhere in the MCM settings
when the time is up, wait an extra 30min and do this
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
ive combed up and down through the mcm settings, theres no option to enable ammo check animations on specific guns that dont have them allready, i dont think thats the issue. I think some bas guns just didnt get a unique animation, but i dont mind reusing existing animations from other guns. So my original question meant, is it possible to do that in the files, and if so where do i look for the animation files
Debug isn't coming up when I press the button
no clue
you need to be ingame not at the main menu
Yea I am
Close the game and run the Anomaly launcher from Mo2
enable debug and run the game from the launcher to save the settings
Ok I did hit save settings, but just launch game from anomaly launcher and then exit and relaunch gamma?
Enable debug
Choose your Dx version
Run the game from the launcher you opened from mo2
Its still enabled in the anomaly launcher
if its ticked then click on play button from the launcher
The high res loading screens from the latest update didn't load on Dx10 or 8
@narrow sparrow Is that it? am I losing anything else though?
nope
Dope, trying to get AA to work...
Just launch and send press f7 or do I back out and use the other launcher and press f7?
launch game
load save
press F7
Can anyone teach me how to revert only the bloodsucker model to vanilla? I think the new model looks terrible, sorry. 
Ok so I typed the release thing in
how do you unbind h to display your health status on the bottom left
see if the crash still persists
iirc you can't
Its the same thing both run from Mo2
!bhs
In order to safely disable BHS, you'll need to disable Body Health System and G.A.M.M.A. Minimalist HUD in your mod list.
thank you
When i launch the game the title screen comes up but it instantly crashes and i get this error
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
It looks like it's stopped crashing thanks, still getting this bug where my guns disappear and I can't use any weapons or items when one of my shitty starter guns jam
Having problem with the fov changing when firing my weapons. Havent done anything except apply a full update
I don't know about that one. Could be an issue with the unjam animations
Thx, that fixed it
Figured thanks for you help tho
Do you press the Freezoom button when firing?
So i assume you have the default modlist of 348 mods enabled?
yes
type fov 80 in the console and see if the fov still changes
i had minimap and unlimited stashes enabled. think that broke it, not sure...
or the stutter fix
https://www.reddit.com/r/stalker/comments/pj4yqy/help_please_anomaly_ctd_upon_start/
i face this just now, but why, just asking
sorry for interrupt
Do I need to go back and disable debug mode to remove the "Demo stamp on the bottom right hand corner?
press f7 and then G to disable god mode
But you can also disable debug mode if you want
Hi I'm having issue launching gamma from MO2 menu
It loads full screen for a split second b4 crashing
!crash send the log
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
Found 2 files, ends with .bkp & the other just my name
Dont send the bkp one. Send the one with just your name
Run the game again let it crash and send it then. The log gets overwritten each time
running gamma now
reached gamma splash screen
crashed
still empty
0 bytes
!k98 try this to see if it gets fixed
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Did this earlier
that got me up to the splash screen
without the above steps no gamma splash screen
How many mods are active in Mo2?
says 348
How about the bkp file is that 0 bytes too?
0 too
does this happens often?
BTW default anomaly works
What Dx version you use?
Tried all versions, 8,9,10,11+avx
Try running Mo2 as admin just to get any permission issues out of the way
Running desktop shortcut as admin
yes run it as admin and try the game again
check to see if it made a log this time
0 bytes again
sounds like the game cant initialize its file system. I recommend doing a clean install on a different drive if available.
You'll need to delete your Anomaly folder.
- Open your Anomaly folder, if you have any save files you want to keep, take them from this folder:
Anomaly\appdata\savedgames - Delete your Anomaly folder
- Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send
!152in #🤖bot-commands) - Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#📢announcements message>)
- Click on
Download GAMMA dataand then click onFull GAMMA installation
running default anomaly game
I think Mo2 is to blame as well
Wai how so?
it didn't crash b4 overwriting from patch
I think it cant prepare the vfs
Not familiar with this
what file system?
In Mo2 run the Explore virtual folder and see it it opens
it opens
Ok then you only need to reinstall Anomaly in this case.
!delete follow the anomaly steps
If you really need to delete everything because you're having problems: #╭📖faq message
#old-how-to-install message then do steps 1,2,3. After that let me know
This would take quite awhile
Took me hours earlier. Hope this time would be be faster
Thanks for helping 👍
If it doesn't work, I would just play anomaly on its own
ok i've made a new test :
starting from my last save before the bug (i already have the near death xp at this moment). It's the save just before transitioning from garbage to the cordon.
I don't go in the cordon but i try to run to an other place... walk to Apogrom.
Transitioning and... IT WORK, no bug, my health bar is ok.
It that mean that the bug occur only when going to the cordon !
Do you have a base in Cordon? like do you store items there?
that my 1st base (starting point), i've still some item in a case but not so important things. I've already move all my stuff to Rostock (my new base), i play "loner".
I just have some finish missions to validate and take my rewards.
Do you play with the stutter fix enabled?
yes i think so, 'cause i have shutters issues.
Next time you try to enter Cordon, save and close the game then disable the stutter fix and try.
It could be the larger a-life radius that causes it
yes "turn this on if you stutter" is ON !
right, so next time you are about to enter cordon, disable the stutter fix
I have been told to report here for bugs, ive found that some armors have wrong upgrade values applied, i.e. nomad stalker suit has 37 base burn res, 3 base chem res. If you apply +5 burn res it becomes 37->42, if you apply +5 chem res it becomes 3->4. Ive tested it with %100 condition armor with all %100 parts, so no part rounding errors
post your findings in #1040164855325409310
Thinking i should look up for all the armors and all their upgrades, maybe weapons too, and submit a report so its useful overall
i have a modified alife.ltx, this is a patch trying to limit the stutter for performances, cause i have a good config but a lot of stutter (lag) :
https://www.moddb.com/mods/stalker-anomaly/addons/performance-alife-settings
That the only modifications that i've made (and uncheck YACS Better Campfire Saves)... nothing else.
so wait, you have both this and the stutter fix enabled at the same time?
yep sir ! can conflict ?
they replace the same file
Ha not so good !
Here is what you can do, disable/remove that mod you found, then we can configure this shit manually
i've put manualy the alife file here.
remove
ok i quit the game before.
make sure to also disable the stutter fix in MO2
ok no more alife file in my config folder
then we need to test if you still get busyhands when going to Cordon
without any alife mods
also ? ok i do it
if you don't get busyhands after disabling the a-life mods then we can most likely fix this
ok i've remove the file and uncheck the stutter fix, i restart the game and load the game before the busyhands bug...
OK !
- i've manually removed the alife.ltx
- uncheck the stutter fix in MO2
- reload the saved game in the garbage just before travelling to the cordon.
- travelling to the cordon ...
and IT WORKS !!!!
No more busyhands !
A lot of stutters but no more bug !
ok, we just need to test some stuff now
ready !
close the game
then open MO2
enable the stutter fix again
then open in explorer
click trough the folders until you reach the alife document
Replace it with this custom one that I just edited
done
then go back to the save and travel to Cordon again, we test for busyhands again
ok game is opening
i set the affinity too (core 0).
uncheck core 0
ok i've been travelling to the cordon and the busyhands bug is back !
ok, hold on
quit and get ready for a new alife file
try this one
replacing, restarting...
ok sorry i was a bit too long cause there was an anomaly on my spaw ! 😬
Then, this work fine, no busyhands bug
Hello~
I happen to put on armor and the game crashes
hope you can answer me thanks
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
so no busyhands.... 
lesssss goooo
no sir !
now then, how was the stuttering?
seems good, 4 the moment (1mn in game), i must make a few tests !
There is one last thing you must do.
Currently if you use the installer it will remove this fix, therefore we are going to replace one more thing to avoid that
i can make a save of the alife file ?
Don't know exactly how to describe this but sometimes when i loot people from the military faction their grenades disappear as soon as i open their loot inventory.
go here \GAMMA\.Grok's Modpack Installer\G.A.M.M.A\modpack_addons\Turn this on if you stutter\gamedata\configs and paste the modified alife.ltx file to replace the old one.
no need to close the game while doing this
!new @half harness
YOU HAVE LIMITED ACCESS TO THE SERVER.
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge -🔰- near your nickname and (rightly) don't understand why half the server is gone, carefully read here:
#❗❗newbies-read-this
Am I posting this right here?
Can I adjust ammo values (BR, DMG etc.) myself without too much hassle?
hold on, let me have a look
Do you have #📍577-mods-in-mo2 ?
Do you see any ❌ in MO2 under flags?
Let me see
ok i've replace the old file by the new one !
Great, now just enjoy STALKER GAMMA!
if you have any issues relating to busyhands again, just ping me again: @junior moon and explain the situation
idk how to fix this, re-installed game, removed detachable kit mod. this error shows and crashes game: FATAL ERROR
[error]Expression : _valid( c )
[error]Function : CPhysicsShellHolder::correct_spawn_pos
[error]File : PhysicsShellHolder.cpp
[error]Line : 189
[error]Description : object: wpn_mp7_specter46883 model: dynamics\weapons\wpn_mp7\wpn_mp7_lazer_spectre_hud
stack trace:
(also been getting this at save load: ~ Invalid syntax in call to 'power_loss_bias'
~ Valid arguments: float value in range [0.000,1.000]
~ Invalid syntax in call to 'power_loss_bias'
~ Valid arguments: float value in range [0.000,1.000]
~ Invalid syntax in call to 'power_loss_bias'
~ Valid arguments: float value in range [0.000,1.000])
tks dude, you're the best hotline i've ever seen ! 😅
i'm sorry for the time spend trying to resolve my pain !
So thank you and if you need help (help for images in some mod or else - i'm a graphist designer) you can bip me, it will be a pleasure !
Cheers !

wtf
screenshot your whole MO2 window
\
are you banned from Moddb.com ?
Is there a command to remove all the items in all the stashes? Such that I could benchmark how much all the shit I've hoarded diminishes my game experience? 😄
Will I be alright if I just disable G.A.M.M.A. Large Files?
I have not registered an account
can you access the site?
OK, I'm registered

I did not tell you to do that
I just wanted to know if your IP was marked as a bot/banned
Well, now you know 😄
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
this one?
That is the installer yes
Hello, my friends would like to install the game but they ask me if there is existing a mod wich allow to play stalker on coop
I think I reinstall again, thanks for the help
just follow the instructions I just sent, no need to delete anything
!mp
GAMMA isn't multiplayer and never will be. There's no multiplayer mod for Anomaly or Open XRay engine currently. There's no multiplayer open world mod currently publicly released for Stalker games.
xrMPE is a match based coop experience that is available, it has the most solid netcode but it's not open world.
Stalker R.A.D. is open world and is based on CoP + Gunslinger but isn't publicly available.
Ray of Hope is open world and in closed alpha.
Hello people,
Who knows which mod could cause this crash? I happened when I tried to speak with a merchant on the swamps
Function : CModelPool::Instance_Load
File : ..\xrRender\ModelPool.cpp
Line : 120
Description : fatal error
Arguments : Can't find model file 'dynamics\weapons\wpn_tac_kit_cases\wpn_tac_kit_case_med.ogf'.
I currently can't launch the game after normal install. Getting this error.
[2022-11-28 14:01:00.495 E] [error.cpp:24] Unable to parse file "d:\program files\steam\steamapps\appmanifest_312660.acf": vdf.parse: unexpected EOF (open key quote?) (appmanifest_312660.acf, line 1)
this is not an error
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
screenshot your MO2
wait for ray of hope.... be patient.... very.... LeL
I have default modlist, only mags were activated
so how much mods were there by default?
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
- When I activated mags I had to disable unjam mod(as it was said in the instruction)
it's a BAS file btw
!bas
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
im on ma phone
i figured lol
Oh, I thought that modpack already using new version of BaS. I had to download new version because installer didn`t want to install BaS by itself for some reason. Thank you!
brrrruuuuuuuuhhhhhh
hi i install all step by step all its correct but if i try run game its a windowns error system sound and game its closeing can someone help ?
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel.
You won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.logxray_yournameherewithout any file extension
You just need to send ONE of these files where it was asked. It's either ONE file with .txt OR .log OR with anything at the end.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods, if you do, you'll need to ask in #🔨modded-gamma-support.
HI im getting shader compilation errors, i deleted the shadercache and userltx multiple times and i thought it fixed it, but it just happened again.Here is the error:
! PS: d:/anomaly/bin/..\appdata\shaders_cache\r4\yuv2rgb.ps\20481111001100000010001000001103321131101141001
! CreatePixelShader hr == 0x887a0005
! PS: d:/anomaly/bin/..\appdata\shaders_cache\r4\yuv2rgb.ps\20481111001100000010001000001103321131101141001
! CreatePixelShader hr == 0x887a0005
It seems to always be that shader crashing the game...any help is greatly appreciated .cheers
drag and drop the ENTIRE crash log in here pls
Here it is, thx for looking into it
do you delete shader cache manually or using the anomaly launcher?
manually
!modlist could I also get your modlist please?
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
hi, we can't help you if you don't provide the crash log - instructions for finding it are in the message right after yours
Here is the Modlist
My game just crashed, but my crash log was last modified 30 mins ago. That happened a few times already.
Bro already got helped in #🔨поддержка-стандарт-gamma-ru-ua 
fwiw if there is no error that specifically references that shader it doesn't necessarily mean that shader is what's causing the crash, could be coincidental...
does this crash occur if you use DX10?
never used dx10^^ i will give it a try. will i use some graphical quality?
mayyyybe? you may get some issues with the new CS Eden's Loading Screens
but "slight graphical drop" is better than "can't play the game because of crashes"
definitively!
the crashes where pretty rare, but still annoying. lets see if dx10 fixes it...thx
Have a crash whit Emissions storm, when he come for explose, my game crash
!surgecrash
If you crash with this error during an emission: surge_manager_ignore_npc
- Open your mod list
- Find
265- NPCs Die in Emissions for Real - Right click on it, click
Reinstalland thenReplace
do
Hi guys,
So after (and during, if the fight takes long enough) killing the Burer after disabling the brain scorcher, my game crashes.
Perhaps someone could help me decipher the following log entree:
! [SCRIPT ERROR]: c:/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: c:/anomaly/bin/..\gamedata\scripts_g.script:1445: attempt to concatenate local 's' (a nil value)
stack trace:
when did you last update GAMMA?
two days ago... i see, i'll update first!
yeah a hotfix dropped like yesterday addressing that error specifically - instructions are in #📢announcements
thanks guys, sorry for the stupid question
simple "Download gamma data" and then only install Gamma add-ons" did it for me, thanks
Hey, bit of a weird problem, mid playthrough the enemy AI stopped shooting me. Checked in debug mode, they are agressive, they see me but don't attack me.
Also started a new game and looks like it was fixed. Anything I could try to salvage the old save file? (The old save file was created after the newest patch and hotfix)
!blind
These are POSSIBLE fixes. Let us know in #1040164855325409310 if they worked for you, we're trying to find out a definitive solution because this bug is very rare.
-
If you are about to die because of the psy health, reload a previous save.
-
If NPCs are ignoring you/not reacting to you, even if you shoot them:
- While in game, hit Esc on your keyboard
- Go to Mod Configuration Menu and search
Stealth - Click Default
- Click Apply
- Enable debug mode (<#╭📖faq message>)
- Press F7 and click on Change Faction
- Make sure that the command box for Invisibility is OFF
- Reload an even older save
Cheers, I'll give it a shot
@junior moon there is no default settings in stealth mcm menu ???
Hello, im having trouble with the drop condition config in the mod configuration menu. Basically i like to make the weapons and outfits of stalkers less destroyed so that i can more easily swap out of my gear for something i might find. I had it working fine at first, the gear was dropping with pretty decent condition, but i ended up restarting and messing with some other settings and i think it might be conflicting with other configs or maybe the in game settings. i have outfit dropping set to full and not progressive. basically everything is dropping with less than 20% condition regardless of whether or not someone is a rookie or experienced. anyone know anything that might fix this
iirc this is overwritten by ZCP
Guys i can't find this stash
here's the default settings
gameplay qs to #╟🔰☢newbies-chat
should i only use one of them? i have the settings in zcp set as similarly as i can between the two.
@keen cedar thanks because i have that bug just noticed the stupid i a.. So i set that mod to default settings and continue with debug mod after.
ngl there is a chain of overwritten chances here that i am legitimately too tired atm to follow
but look for the outfit_drop_mcm.script file in your MO2 (right hand side searchbar in MO2)
Apparently all these upgrade kits are ffor vanilla anomaly and were fixed in mod 147 streamlined upgrades but I still get these dropped? Any help https://i.gyazo.com/881be68e793b7014ca87e75247ef5f52.jpg
!147
Explanation to your problem:
Those upgrades are from Anomaly vanilla, you shouldn't see them, because GAMMA have different stuff. There is a mod that change the "vanilla" upgrades into "modded" upgrades.
Follow this guide and the problem will be fixed.
yeah when i saw the similar settings i was kinda not sure if i should mess with them. lol its not a huge deal. atleast i know its most likely just the two conflicting. ill try defaulting and troubleshooting the settings. thanks anyway!
thanks
One more problem, I repaired my ak-12 monolith to nearly max and used the upgrade kit and regardless of whether it was low-max durability the default gun still shows at 26% in the details. Does the value shown at 26% change at all? https://i.gyazo.com/f5bfb5efdc4a95508abb81b654c10429.jpg
the replacement parts thing is purely a visual bug
has no bearing on the actual durability of the gun, which is listed at the top
yeah was thinking that, thank you guys
quick question my friends, can i run warfare mode from the get-go or do i need to add some stuff?
!warfare
G.A.M.M.A. isn't built with Warfare in mind and Warfare, per se, have bad perfomance, bugs, issues, etc., this is why it isn't recommended.
You can play it if you really want to, but forget about #🔨base-gamma-support, this channel support is only for G.A.M.M.A. vanilla (which basically means no extra stuff at all) and is also used by Grok for bug fixing.
Since G.A.M.M.A. vanilla doesn't use Warfare, you'll need to use #🔨modded-gamma-support.
thank you
@keen cedar hey thank you buddy, it worked for me, i mean the i a react as they should now and again instead of being stupid and blind as shit.... am was like bruh am playing in hard/surv but..... no fun at all...
The only settings i changed from stealth for me was > memory....
Thanks !
Where do i find my savegame for backup
think it's in Anomaly\appdata\savedgames
thank you
Hello, there is a solution to see what is the mod wich is update each time ?
Look through the logs in here \GAMMA\.Grok's Modpack Installer
how to increase damage taken by companions
Yes but I don't see It ??
I am afraid that I don't understand what you mean
xD
I just said, I don't see anything in the logs wich show me the last mod wich was update on the gamma luncher
Its probably my fault, because I think I re-download all data
You should have a series of logs, the ones with more than 2kb data are the ones to look for
crash upon loading a new game (haven't tried loading previous saves yet)
some background information (perhaps could help):
(1) just did a windows reinstall, I did not bother reinstalling GAMMA since it's not on my OS drive; and
(2) also, just after the os reinstall, while updating with the anniversary patch's 1st hotfix -- system crashed mid-update (stupid evga psu's eco mode).
do this:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Select ModDB download mirror 128
- Click "Full G.A.M.M.A. installation"
Installed the game yesterday. Everything was working, except when going to garbage. Immediately after loading in crashes. Loading other saves works just fine but again, going into garbage crashed it.
Some people there know a UI mod wich is cool ?
/// Actor got hit - Grok damage balancer
0 + 0.1981619489193 + 0 + 0
part hit = nil
hit power = 0.28600001335144
total protection = 0.1981619489193
damage to actor = 0.11466284665739
{@} --- Invalid destination [-67.084160][17.578772]
{@} --- Invalid destination [-67.093071][17.582775]
{@} --- Invalid destination [-66.852402][36.080910]
{@} --- Invalid destination [-66.871902][36.055386]
{@} --- Invalid destination [-66.855774][36.076542]
{@} --- Invalid destination [-66.869919][36.058006]
{@} --- Invalid destination [-66.863640][36.066284] [2]
{@} --- Invalid destination [-67.398216][14.105160]
{@} --- Invalid destination [-67.365822][14.127351]
{@} --- Invalid destination [-67.345741][14.140832]
{@} --- Invalid destination [-67.378922][14.118443]
{@} --- Invalid destination [-67.344231][14.141839] [2]
{@} --- Invalid destination [-67.077324][13.960733]
{@} --- Invalid destination [-67.055984][13.981934]
{@} --- Invalid destination [-67.099022][13.938652]
{@} --- Invalid destination [-67.065903][13.972145]
{@} --- Invalid destination [-67.101662][13.935925] [2]
{@} --- Invalid destination [-67.046013][28.316996]
{@} --- Invalid destination [-67.083832][28.290392]
Time continual is:7968846
- Register UI: UIMutantLoot
- Unregister UI: UIMutantLoot
stack trace:
at address 0x0000000140155828
Does that mean anything? 😅 Game crashed afterwards.
Someone got shot (you?) then the game ate shit
I shot a zombie. After it hit me. Looted, then crash.
I say ignore it unless it becomes a recurring issue
someone can help me?
I've reinstalled anomaly, but when installing GAMMA the anomaly launcher just doesn't recognize the modpack at all
Just run the anomaly without GAMMA
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
try 
helo can anyone tell me how to increase damage taken by companions they all seem like supermans
Thx, now it works
Is this the right channel to talk about bugs in game??
Hello, I notice a bug in the animation of the carabineer since the last update. When the gun is empty, the first part of the reload consist in the "loading" of a ghost shell and the atempt to "pump" the carabineer before starting the normal reloading animation. Am I the only one to have this bug ?
I have this bug where I try to unjam a gun, but the animation pulls the gun below my screen out of view and doesnt vring it up again and then suddenly I cant pull out any other gun no matter how much I toggle them..
- Register UI: UIInventory
! [LUA] 0 : [C ] f
! [LUA] 1 : [Lua] ...aly/bin/..\gamedata\scripts\optimized_time_events.script(248) : functor_a
! [LUA] 2 : [Lua] g:/anomaly/bin/..\gamedata\scripts_g.script(462) :
! [LUA] SCRIPT RUNTIME ERROR
! [LUA] 0 : [C ] f
! [LUA] 1 : [Lua] ...aly/bin/..\gamedata\scripts\optimized_time_events.script(248) : functor_a
! [LUA] 2 : [Lua] g:/anomaly/bin/..\gamedata\scripts_g.script(462) :
! [LUA] ...aly/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
! [LUA] 0 : [C ] f
! [LUA] 1 : [Lua] ...aly/bin/..\gamedata\scripts\optimized_time_events.script(248) : functor_a
! [LUA] 2 : [Lua] g:/anomaly/bin/..\gamedata\scripts_g.script(462) :
! [SCRIPT ERROR]: ...aly/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...aly/bin/..\gamedata\scripts\optimized_time_events.script:248: attempt to call field 'f' (a nil value)
stack trace:
i keep getting this error
@soft dragon I think that there is a fix for this available already in announcements
"Download gamma data > only install gamma addons in the installer 💚" this one? sorry i missed it. @kindred gale
yeah I think you just update it
i just installed the full one a few hours ago. Thought it'll be fine
I can't find the option for backpack animation, isn't it supposed to be at MCM/FDDA Settings?
removed
if you want it, you need to disable 'fdda reliable anim settings' addon in MO2, once you untick it, any bugs you may encounter go to #🔨modded-gamma-support
thanks
you installed it with the installer right?
!busyhands also have a read:
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
yes the orange full installation
you could try Download Gamma Data again, but the update seemed to fixed the issue for other people
i clicked the only install gamma addons options. works so far, i'll see how it goes. thanks for the help
any ideas on how to fix this?
Ive tried updating gamma so i could get vector and ive tried to do the full install way and addon way but i still cant see the vector mod in mod organizer
check #1035807043933720576
Hi the mod organizer just broke my computer i dont know how but it ceases functionning correctly
missing a file from "G.A.M.M.A. Weapon Pack" - try to manually reinstall it by following these steps
- Find the mod in MO2 using the search bar
- Right click > Open in Explorer
- Delete everything inside the mod's folder
- Run installer as admin
- Click "Download G.A.M.M.A. Data"
- Click "Only install G.A.M.M.A. Add-ons
My hard drive was at 100% all the time
Yup, noted error
Should this have taken only like 2 seconds? It says that it just copied the G.A.M.M.A/modpack_addons/* to /mods/ so I don't think it reinstalled anything
Download GAMMA Data showed that it's already up to date
yes, "Only install GAMMA addons" goes very fast
since yesterday, my game crashed and then started crashing again after playing for a few minutes, now my game sometimes crashes on startup
and If I want to load my save it takes several minutes and everytime I look into my inventory or stash my game freezes for serveral seconds
the more items you have the longer it takes to load. this is especially pronounced for ppl who have tons and tons of shit in their stashes (in total, not just in the stash you're trying to open)
hmm don't think it should be showing only 151
yeah you're missing almost 200 mods
It went from like 0,5 seconds time to over 5 seconds, the same with loading time is 10 times longer now
how long have you been playing on that save
well then provide crash log and modlist
the log gets overwritten every time you start up the game yes
which is why i presume it looks completely fine and non-crashing
!modlist and your modlist?
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
mostly default, I use mags redux, invictus protect and disabled !deadzone
the crashes happened mostly yesterday
just had 1 startup crash today
latest log, but already overwritten probally
didnt crash I just ended the game
yeah i can see - gunfight with zombified stalkers then just quit out
i'll be honest with you, unless you have a single, specific, reliable trigger for your crashes, it's going to be extremely hard to recommend any concrete actions
that's very normal but none of that helps us pin down a crash, because none of your logs show a crash
Shouldnt the archives be 97 instead of 70?
Thanks veerserif, reinstalled missing mods and everything seems to be working now!
what do you mean?
that number should be 97 correct?
oh, you're right - i don't know what to do in that case though tbh
Anomaly reinstall maybe works?
well. worth a shot i suppose
anomaly ? not gamma ?
just did a full update after the new patches, i have all 348 mods but a ton of them have red Xs in MO2. i'm crashing on startup, here's my crash log (looks like a weapon sounds is missing?):
Check if you can access Moddb.com
Yes reinstall only anomaly don't touch gamma
locked out.. hitting the orange button twice got me
i re-ran the install as admin since the first time i did it i only had 346 mods
Reinstall Anomaly
The 152 update
Run the vanilla game once
Then Open the installer as admin
Download gamma data
Full gamma install
Do these steps
!dest
You'll need to delete your Anomaly folder.
- Open your Anomaly folder, if you have any save files you want to keep, take them from this folder:
Anomaly\appdata\savedgames - Delete your Anomaly folder
- Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send
!152in #🤖bot-commands) - Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#📢announcements message>)
- Click on
Download GAMMA dataand then click onFull GAMMA installation
I have 340 active mods instead of 348 after doing two Full installations (one yesterday and one today), i am not banned from moddb
I See a lot of errors in the CMD Terminal, mostly "The system cant find the specified route"
Wait the timer shown at the moddb page plus 30 mins
Should i Copy-Paste the whole Terminal Text?
ty!
no need, give us a screenshot - we don't need to know specifically every error but it helps for us to see an example of one
Sorry for the overlaying thingy, and that it is in spanish
(I am also not the best at connectivity/download issues... although it does seem that your issues are all with ModDB mods?)
I am not banned so idk
wonder if changing mirror to 127 or 128 will help
Hello all, my C:\ disk is an SSD, while D:\ is a hard drive, in which should I put the "Anomaly" or "Gamma" folder for maximum efficiency?
the ssd will let it load faster. make sure both the Anomaly and the GAMMA folders are on the same drive
I am trying to help another user get the pack working on steam deck. They are running into an issue where the game crashes on entering the settings menu, is there a fix or solution for this?
I understand that. They can both be on the same drive?
i know exactly as much about steam deck install as the readme in #old-how-to-install
Right. I followed that myself, and it is working correctly on my steam deck.
although because this engine is weird - get them to try switching to fullscreen/borderless (whichever one they AREN'T on), Apply Changes, then try to change settings again
they MUST be on the same drive
Gotcha
When i gonna try it in a few minutes so i dont get flagged then
I have been loaning myself out to others to attempt any wanting to get it working on steam deck since I realized I was one of few to get it functioning on SD
Thanks for clarifying. I have misread it. Thanks anyway 🙂
without looking at their crash log, the other guess i would have is that xray sometimes has a hard time getting the resolution of the machine in question - they can manually edit the screen resolution of Anomaly/appdata/user.ltx to set it that way
Fantastic, I will forward these possible solutions to them and get back to you if either work. Thank you
my reshade is completely gone, how do i re-enable in game?
i have 402 mods installed, isnt it supposed to be 348? how do i know which to disable?
!scrambled you can try this method to reset your modlist
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
the button to enable/disable ReShade in game is PageUp by default, Reshade menu key is HOME
thnks, those keys arent working, its completely gone, dk , been a cluster mess of re-install today
Reverted my mods to the default 348 this morning, and am still getting crashes after sleeping. Anyone else experiencing this? It's kinda ruining my game :/ I am up-to-date with the app data.

