#🔨base-gamma-support
1 messages · Page 193 of 1
Disable antivirus, open installer as admin, click full install
it'll install again or fix the missing files only?
cause i have no free space left in my ssd
It will only download the stuff you are missing, but it will re-extract all mod files to reset everything also.
As long as you have like around 5-10GB free you should be fine
Also PC pro tip: SSDs HATE being full and need some free space to work properly
highly recommend a program called treesize to find and delete suprisingly large chunks of files you never use and forgot existed
didnt know that, thx
i.e. i recently found out my shadowplay videos folder was over 160GB...
just installed it and it's helping a lot 🙂
Im getting same damn error again, i already checked that i have all the mods installed
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
why do i have to update its already 1.5.2
Just do it, shit be weird like that
after doing that i got this error on start
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
send the crashlog
anomaly/appdata/logs
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...lker/stalker/bin/..\gamedata\scripts\ui_main_menu.script:26: attempt to call field 'init_opt_base' (a nil value)
I followed every step in how to install and reinstalled buy still getting that error
Reinstall Mod 109 MCM mod config menu
Now a black screen's opening up when I try to launch the game and afterwards game crashes
sounds like a new log to me. Send it here
mornin yall, got a ctd when my first psy storm hit
! [SCRIPT ERROR]: .../bin/..\gamedata\scripts\zz_surge_manager_npc_die.script:76: attempt to index global 'surge_manager_ignore_npc' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: .../bin/..\gamedata\scripts\zz_surge_manager_npc_die.script:76: attempt to index global 'surge_manager_ignore_npc' (a nil value)
!surgecrash
If you crash with this error during an emission: surge_manager_ignore_npc
- Open your mod list
- Find
265- NPCs Die in Emissions for Real - Right click on it, click
Reinstalland thenReplace
tryed it and didnt work
i'll try to reboot pc
Do you hear any sound or does it just crash?
just crash
send the log then
just the crash report or whole?
When killing Commander Military from Agroprom my game crashes
the log file
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
don't enable ANY of the mods with "Bounty" in the name. They should already be disabled by default
still crashes on launch 😦
my game crashed without fatal error in the log
https://gyazo.com/c8e54365b2ac11b87e6480ae6209a2ef this happens when i travel into cordon from swamps, is my save corrupted or is there a fix?
and when i try to heal i cant pull a gun out at all
(also happened when a gun was seriously jammed)
Anyone know where the items condition is stored?
Tried it too
!busyhands
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
Hello.
Do I need a new game for the 10/27/2022 update?
Downloaded before this update.
-----loading d:/anomaly\gamedata\configs\system.ltx
! Invalid ogg-comment version, file: d:/anomaly\gamedata\sounds\jammin.ogg
Loadout Injector: adding item detector_anomaly, points 150, amount 1, faction dolg;csky;monolith;bandit;stalker;killer;greh;isg;renegade;army;freedom, economy all, to inventory false
Loadout Injector: adding item detector_anomaly, points 150, amount 1, faction ecolog, economy all, to inventory true
Time continual is:56489
SWMtrue
! Invalid ogg-comment version, file: d:/anomaly\gamedata\sounds\interface\21_game\full_loose.ogg
! Missing ogg-comment, file: d:/anomaly\gamedata\sounds\interface\21_game\new_card.ogg
! Missing ogg-comment, file: d:/anomaly\gamedata\sounds\interface\21_game\new_game.ogg
! [SCRIPT ERROR]: d:/anomaly\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: d:/anomaly\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
stack trace:
What do I do?
Thank you!!
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
imagine how much trouble you could have saved if you hadnt skipped literally the second step of the install guide
guess you forked yourself by doing that

i appreciate the pun but the zip program probably wasnt the issue
Go to MCM settings, disable it there
is there big differences between directx versions?
9 doesnt work, 8 cant do shaders
Cool
11 is a gamble and 10 is stable
AVX only helps if you CPU has a dick that reaches from earth to the moon
fixed it, it was the "head damage" problem.
This pop up shows up and make me unable to click anything else, and when i close it, it close the cooking menu too
known issue, it happens when you close the crafting menu when a tooltip is visible
save and reload should fix
crashing whenever i walk near the pump in the swamp, any ideas why?
!modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
screenshot it for me with all categories closed
🤷
Is there any other folders that mo2 things end up in?
im gonna try not taking the renegade ambush quest and see what it does i guess
He has alot of Lua errors from a base Anomaly script. Maybe that script decided to die?
im feeling that aye
hard to tell with empty stack but its standing out quite a bit lol
Its 1000+ lines of the same script erroring i suggest a reinstall of anomaly
Hello, I think the texture for the magazine on the AN-94 Abakan is missing, it only appears during reload, is there a fix for this?
so I am in x-16 and my companion is stuck at one doorway and refuses to go further. ai commands don't work. the companion teleport mod doesn't work either, i teleport him, but he runs to the doorway and stands there again https://i.imgur.com/PhjKFda.jpeg
gonna try going there without accepting that quest and if not i'll try a reinstall
intended afaik
it wasn't the usual "got a job for me" quest if that helps
he will come through once you turn off the brain scorcher
ok. do they teleport to me later when i finish it? or stay there?
ahhh okay
they teleport when you enter a loading area, it happened to me too in other areas
i recommend setting him to not attack though or he might die on the way
there will be... obstructions
or you can just teleport him after its off
ok it doesn't crash if i don't take the renegade ambush quest
please tell me it's not a story mission
oh it is

from Cold?
is that the clear sky dude
yup
aye
You'll need to delete your Anomaly folder.
- Open your Anomaly folder, if you have any save files you want to keep, take them from this folder:
Anomaly\appdata\savedgames - Delete your Anomaly folder
- Extract a clean Anomaly folder (VERSION 1.5.2 IS THE ONLY SUPPORTED VERSION FOR GAMMA, if you don't have it yet, type and send
!152in #🤖bot-commands) - Run the installer as admin and make sure you have the latest version: 3.8 (If you don't have it, grab it here: <#📢announcements message>)
- Click on
Download GAMMA dataand then click onFull GAMMA installation
another issue. turning the first switch in miracle machine freezes game. no crash, nothing, just a freeze
oh you're doing miracle machine my bad
ignore what i said about him coming to join you he wont until you leave
dunno about the freeze though
I crash and get this error any time I try to ADS with NVGs on. I've tried to re-install the NVGs mod and cleared shader cache.
!nvg
If you're crashing with the following error: gamedata\scripts\z_beefs_nvgs.script:561: attempt to call method 'GetZoomType' (a nil value)
- Make sure you have the latest G.A.M.M.A. installer, version 3.8. If you don't have it: #📢announcements message
- Open the installer with admin rights
- Click on
Download GAMMA data - Open your GAMMA RC3 folder
- Go here:
.Grok's Modpack Installer/GAMMA/modpack_patches/binand copy-paste the .exe files to your Anomaly folder inside thebinfolder
FATAL ERROR
[error]Expression : <no expression>
[error]Function : CScriptEngine::lua_pcall_failed
[error]File : ..\xrServerEntities\script_engine.cpp
[error]Line : 204
[error]Description : fatal error
[error]Arguments : LUA error: ...ly/anomaly/bin/..\gamedata\scripts\guards_spawner.script:146: attempt to call method 'commander_id' (a nil value)
stack trace:
So, after a couple hours of troubleshooting I still haven't been able to solve this error. Tried dragging the 1.5.2 update and using the installer, copying the folders from gamma modpack into the anomaly folder, even did a complete reinstall and it didn't go away. Before it only happened in army warehouse, now it's started happening in some other zones too. Should I just disable the guard spawner addon or is that gonna fuck up my game?
Hey amazing peoples, I got a slight problem or as my father would say "Who watered down my vodka!" At certain locations on the map eg Zanton, The radio building in the lowest sub levels and the barn at the I believe is a logging place causes my game to just close randomly. Any ideas what could be causing it? Thanks again for helping us non coding people experience an amazing game!
i changed some settings then this happened
Whenever I kill the Technician in Bandit Camp, located in Dark Valley, my game crashes... Can somebody tell me why
yo why dont i have all the routes?
change your fov
guides only take you to specific places. that's just how it works
no? it's just the gun position
if you enter freelok you will see the magazine is attached to the weapon
also you can just right click on the map to fast travel?
i disabled fast travel
lmao
do you have the money?
iirc the dialogue has that the actor needs X money before the route appears as a dialogue option
"I can take you to the rookie village for 1500, Agroprom for 2000 & Bar for 4000"
routes not there
that seems to be it, thanks
try to reinstall it first, the guards spawner mod
- Find the mod in MO2 using the search bar
- Right click > Open in Explorer
- Delete everything inside the mod's folder
- Run installer as admin
- Click "Download G.A.M.M.A. Data"
- Click "Only install G.A.M.M.A. Add-ons
Is this a feature or a addon, I wanna go to Limansk and Yantar as a merc in story mode but I'm getting psy-damage. idk if its a feature in story mode or simply a addon.
Im trying to edit the loadout for when starting a new game any idea why it doesnt stick? C:\Anomaly\gamedata\configs\plugins is the pathfile
feature
#📢development message
I've turned on Mags Redux and turned off the appropriate addon, I can't seem to find where to bind the unjam key though.
there is a key for it? I just press R haha
Real quick how do I teleport companions? the default J keybind doesnt work
Yes i've tried that too. No luck
Also how do I get these dudes to sprint? When I sprint they just follow me with a light jog (and eventually end up like 70 meters away before I have to pause and wait for them to catch up)
Still crashing when ADS'ing with NVGs. Even after doing all the bot said too.
there's like 3 routes missing on the screenshot which that guide is supposed to have
yo i'm trying to install 1.5.2 but the instructions are a little unclear, not sure if overthinking: currently 1.5.1 installed to C:/Stalker Anomaly/Anomaly 1.5.12. ---- do i unpack to here or to C:/Stalker Anomaly
wherever these files are
unzip it in there
ignore the unpacker
thats not part of the mod
sorry mate you already did the other fix so idk what else to suggest
did you choose the right options when you reinstalled beefs nvg?
- Find the mod in MO2 by searching for
Beef’s NVGin the left pane.- Right click the
189- Beef's NVG - theRealBeefmod and click reinstall.- Tick the following:
- Beef’s NVG
- Beef’s NVG - Patch (ES AND SSR)
- Click replace
- Delete your
Anomaly\appdata\shaders_cachefolder.
Does anyone know why my mouse is where my crosshair should be when I have nothing equipped? When I equip a gun/knife/anything the crosshair shows up. But if I'm holding nothing the mouse curser is stuck where my crosshair should be
I have the same issue as @light ferry Expression : <no expression>
Function : CScriptEngine::lua_pcall_failed
File : ..\xrServerEntities\script_engine.cpp
Line : 204
Description : fatal error
Arguments : LUA error: ...2/bin/..\gamedata\scripts\aol_mp412_monkeypatches.script:98: attempt to call field 'callback_add' (a nil value)
stack trace:
!152
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
just a quick question, the gamma addons file isnt required for installation anymore?
i somehow accidentally got rid of the things that separate the mods in mod organizer, does anyone know how to fix that
ty will try it
On the left side of MO, are the mods still listed in order? 23, 24, 25....
yeah, theres just no arrow to hide the section of mods im tryna look at
like im tryna hide the qol section of mods but dont have the arrow to hide it, if that makes sense?
Screenshot?
!default do the modlist part
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
There you go ^^^
word ill see if this fixes it. thanks
Any help with this??
this didnt work but i got it fixed
ig i clicked something and it sorted the mods or something
Is there a lower weapon mod included in gamma? I cant find it
Like a keybind or something to lower my gun?
press B
B lowers my weapon for me
all this time my brain has been overwriting gamma keybinds with arma keybinds 
ok so i figured out the 1.51 to 1.52 unpack
but i'm not sure whats going on with groks
ive launched 1.52 already but can't figure out where the installer is for grok in the gamma.7z ???
Its right in the keybinds menu how did I miss it... thank you!
the modpack installer folder isn't in there. i feel like i've done something wrong
i'm not a fucking idiot but idk what your instructions are
also that filepath is wrong? all these files should be in GAMMA RC3/downloads, not GAMMA/GAMMA_addons_downloads/downloads
literally where it extracted to?
this isn't your gamma folder that you're looking at
this is the file i got from the mirror
click it
I DID
screenshot the link
it gave me a 7.8gb file lol
scroll down bro
scroll down
well they're different files for one
it was a hacked together solution when people ddos'ed moddb for a month. not needed any more
ok i get that now yes
but also it was to reduce the load on moddb servers after we crashed the fuck out of them last month
they don't hurt but the install instructions don't cover that bit anymore i guess
the installer downloads them if you dont have them
so i should keep them unpacked?
don't unzip them
because they're all individually compressed.. ok
well unpack them in gamma/downloads
not unpack the files but the addons archive
my b
keep the zips from inside the addons zip zipped
ok
thats an awful sentence isnt it
yes

for comparison's sake this is what my GAMMA RC3/downloads folder looks like
it's supposed to be full of zip files
yep yep i got it. also using 7z btw but winrar default
hey folks, asking here but idk if its quite the best place for this kind of question, but i can't think of anywhere else
i'm thinking of switching factions from loners to ecologists, and someone mentioned that it may cause issues with some main quests
the main quests i've got going on rn tell me to: "Meet with Loki", "Bring Prof Markov three anomalous samples", "Disable the brain scorcher", "Find Prof Kovalev in the Great Swamps"
could those break if i do it, or am i safe?
it's more that if you try to continue the living legend storyline we have a report that it can break, but we also have a fix. if you don't care about that storyline then it doesn't matter
Living Legend is the Strelok storyline, right? So that'd be the line from...Meet with Loki?
whoever's in the NW of great swamps also has some strelok questline tie ins
but idk if it affects w/e this potential conflict is.
i clicked "mod name" in MO2 to sort in alphabetical order, but i dont know how to change it back to sorted by catagories
does anybody know?
click on priority
Hey all, received this error today, first time seeing this one, any ideas?
[error]Arguments : LUA error: ...anomaly-1.5.2 full plain game\gamedata\scripts_g.script:1596: attempt to concatenate local 's' (a nil value)
Run a full install first to see if it gets fixed otherwise you need to reinstall anomaly
!full
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
This is a fresh install, so i'll reinstall anomaly i guess... Bummer, it takes so long.
wish granter keeps crashing my game
Not sure if the gamma mod fixes it..... But by default on OG game.... it's supposed to.
some of the choices are bugged in gamma iirc
okay
how to set my modlist back to default?
Hello, when I try to start a game my game crashes, I saw that I need 336 active mods but which ones should I activate?
how many active mods do you have now
!default follow "Mod list"
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
To end the mission segment, walk up the wish granter, interact with it, then choose the 6th? option. to walk away.
Now 335 because I tried to activate some to see if it didn't work so no
and thats the last misson?
Its one of 3
bet
you should NOT try to manually activate the mods to try and reach #📍577-mods-in-mo2
ty for the help
!full run a full install again since you're missing mods. do not delete anything
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
ok ty ^^
My UI doesn't show thirst, hunger, psy, ammo count. Can anyone help?
It happen from one day to another
press numpad enter
Thanks brother ❤️
still a bit worried that i've hacked together gamma
wish granter is the fake ending
already downloaded the 'downloads' bit.... should i have just allowed 'full download'?
i don't remember how it is in anomaly, but in soc you have 2 routes for ending
- wish granter
- unlock? the door to monolith war room or smt like that i don't remember
you've got a ladder climb ending or the wish granter ending iirc
im 26th on the ladder
wish granter ending is actually the true ending
so might go for that
become monolith slave brother
Сука блять
yoooo
i already installed gamma_downloads
Just found out that GPU Tweak 3 crashes Gamma without error log
i didn't perform a full gamma installl - how do i launch for gamma?
you NEED to perform a full gamma install through the installer even if you have that file unpacked
do every step in #old-how-to-install
My game keeps crashing whenever I try and begin a game, can anyone tell me what the problem is?
!crash post your crash log here
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
That's the weird thing, I don't get one.
so if i already downloaded all the anomaly_downloads zipped files... does it re-download them?
do i need to keep them on my HDD or does it create a new copy with the full gamma install?
literally the most jank fucking install i've ever come across
I'm getting this bug where I can't finish an escort mission, the mission is basically done, we are back in base, I talk to the guy he says thank you bla2, and I answer okay but nothing happens, is there a fix for it? (tried quicksave->quickload it didn't work)
no progress bar, not sure if broken or frozen or still working tho. stuck on Dux's innumerable characters kit blackjack patch____________
ah it is still working. good shit
So I have the Mod Organizer up, I've literally just finished the installation steps, and just wanna make sure my thing is correct. The lightning bolts are saying that there are file that are overwriting or conflicting with other files. Is that normal or will I need to some how organize it with a button or manually?
screenshot Anomaly/appdata/logs for me then
no, it installs them properly and fetches the missing ones and then patches your install
normal
screenshot MO2 for us if you're still worried
second file is your crash log. drag and drop it here
firstly, that just says the main menu started up
secondly, did you run the Anomaly game once by itself, step 3 in #old-how-to-install
Yeah, I've played anomaly since.
every time you run Anomaly it overwrites the file - let it crash out again then send the file AFTER the crash, BEFORE you open the game again
Got it
!152 update Anomaly to 1.5.2 and then apply GAMMA's patches by following all these steps
- Download the 1.5.2 update: https://www.moddb.com/mods/stalker-anomaly/downloads/stalker-anomaly-151-to-152
- Open the zip, you'll see 4 folders and a text file
- SELECT the content of this archive (4 folders and a .txt file)
- DRAG AND DROP the content of this archive inside your Anomaly folder
- OVERWRITE everything when asked to do so
- Open the installer with admin rights
- Click on
Download G.A.M.M.A. dataAND THEN CLICKFull G.A.M.M.A. Installation
IF YOU HAVE THE ENTIRE UPDATE FOLDER NAMED Anomaly-1.5.1-to-1.5.2-Update IN YOUR ANOMALY FOLDER, THE GAME IS NOT UPDATED.
https://cdn.discordapp.com/attachments/922555488665743391/1031175832376447077/unknown.png
All right.
!scrambled you have way too many mods. reset your modlist by following the steps
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
Thank you i'll try this, I did use the enable all mods button so I figured I fudged something up
never click enable all
!disabled
Mods under the G.A.M.M.A Disabled category and ALSO other disabled mods that aren't under this category, are disabled for a variety of reasons: compatibility, performance, bugs, busy hands, etc.
DO NOT ENABLE THEM. SERIOUSLY. DON'T.
(If you don't know what "busy hands" is, type !busyhands in #🤖bot-commands)
What about animations? Can I enable them?
DO NOT ENABLE ANIMATIONS THAT ARE DISABLED BY DEFAULT, IN MCM IN GAME OR ANYWHERE ELSE IN THE MOD LIST.
They are disabled for the same reasons written above.
Why do we have these mods in the mod list if we can't activate them?
Because G.A.M.M.A. is STILL IN BETA.
NO, Grok can't simply remove these mods. Version 1.0 will have a clean mod list.
If you really want to use stuff that is disabled by default, forget about #🔨base-gamma-support, use #🔨modded-gamma-support instead.
hey what do i do if i dont have 336 active mods
how many do you have right now
305
!full run full install again by doing exactly the three steps below until you have #📍577-mods-in-mo2. You do not have to delete anything
A Full GAMMA Installation does NOT remove saves, nor does it mean you are redownloading everything and it won't delete anything at all.
A full install will simply check every mod in the pack, and any that need to be updated will be updated.
To Perform this follow these steps:
- Open your
G.A.M.M.A. installeras admin - Click "
Download G.A.M.M.A. data" - Click "
Full G.A.M.M.A. installation"
boomstick install be like zzzZZZ
thank you
Can someone help me with puting the clock back where it should be?
@keen cedar Is this due to not having the game properly downloaded or something?
ignore MO2 errors
how many active mods do you have now
what resolution are you playing on
336
try to play the game then
and...?
yeah just making error noises and then sending me back to the MO2
!crash find and post your whole crash log here, drag and drop the text document
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
1760x990 (16:9)
it didnt work i still have 305 active mods
nonstandard resolution even at right ratio can cause weird shit like that tbh
go to https://www.moddb.com/. does it say you're flagged as a bot?
yes
then you will have to either wait until you are no longer blocked or use a VPN. once you are no longer flagged as a bot/using VPN, run a full install again by following these three steps. do not delete anything
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Full G.A.M.M.A. installation"
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
ok!
screenshot MO2 for me
Alright man I hope they pay you, cause my games working now, so thank you for your patience with me
!scrambled that's why, you have way too many mods on. reset your modlist by following the steps below
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
good to hear, hope you enjoy the game
Thanks i'm gonna try it
Hello, I reinstalled the modpack as I was told but I still only have 335 active mods, how do I do this?
@keen cedar Thank you man ! One more thing, can i active more mods? is 336 mod is the maximum the game will support?
you can add more but you should know exactly what they do first. get your game running before you try to add more mods
!modlist generate your modlist according to the guide, then put it here
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
so lets try the one's who works so, one by one
no don't do that smh
go read #❗❗newbies-read-this and then once you do that, go to #🔨modded-gamma-support and ask in there
don't just randomly enable mods. a lot of them are disabled because they cause crashes or major bugs.
okay its way more smart X) and efficient
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
I go try thanks
I’m reposting my question from this morning: So I did a full reinstall because my shaders were screwed up and now my scope visuals look weird. Theres no movement blur or anything like that. Before, when I scoped in on a weapon, the parts of the screen outside the scope were blurred, and when moving/gun recoil, the viewing angle of the scope would move, like a vignette.
Anyone know if it's normal for the north to be empty and barran (of common stalker squads), after I did "delete common squads" from debug menu? About +1 week of ingame time has passed since then, and my Yanov station in Jupiter is pretty much empty 
I don't know the workings of the game well enough, but my guess is, that if the achievement "Duga Free" from turning off the Brain scorcher added more squads to the north. Then maybe Delete common squads deleted them all, and they aren't repopulating?
(I used delete common squads cause I kept crashing in Zaton, from searching here on Discord, it sounded like a ammo problem on random stalker squads)
it worked thank you
anyone knows a way to fix water flickering and lack of water reflections? im not quite sure which mods i need to reenable/disable..
do you have an amd card
not an amd card perse, but ive got integrated graphics on an amd cpu
that would be why - screen space shaders (which is the mod that handles water reflections) has some issues on amd cards. you can track the moddb page for it though https://www.moddb.com/mods/stalker-anomaly/addons/screen-space-shaders/
crash when i told my companions to hold fire D:
Hi.
When I reach a certain place at CORDON - my game BUGS very hard.
- I Don't see factions of people I aim at.
- I can't do quests properly(I have stuff in inventory, can't hand it)
- I don't see my own HEALTH, no matter what I do.
- When talking with npc - it doesn't zoom into them, like usual.
- Game CRASHES when changing location/loading save file.
I am looking for ways to fix it WITHOUT loading previous savefile.
Anyone?
This though is not tied to CORDON.
IT happened at other locations of game
Loading previous saves DIDN'T Work because it keeps happening.
I loaded save for 4 hours before noticing bug, went there through entire location, no bug.
2-3 hours later, same place, same bug.
!modlist what's your modlist
Follow these instructions to send your mod list: <#╭📖faq message>
(if you're using this command somewhere else, send the file where it was asked)
I'm warning you now that the solution for this is almost certainly going to involve starting a new game because it sounds like your savefile is affected by hard busyhands
Only one mod not from list initially is disable pulse anomaly *that I didnt turn off, lol
no, you also enabled something in the "Disabled" category and you're one update behind
wh-??!
disable "55- Mutants Bleeding - Arszi"
Yeah, I think.
Hello Can someone give me console command for spawning dr Chernov in Army W. His ID is ah_mil_chernov
and while you're at it, update:
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Only install G.A.M.M.A. add-ons"
you do not need to start a new game after you update
#📢announcements is basically the changelog
you are missing the update from 27 Oct #📢announcements message
Hey people! I reinstalled the game recently after 2 months of not playing and my fresh install greeted me with these errors
!bas
- Download the old BaS version:
Mirror 1: https://drive.google.com/file/d/19ttcqQ-iAxgmeZ0ufjYc2XEOb5y-T1lH/view?usp=sharing
Mirror 2 (only if first mirror is down): https://mega.nz/file/2JFXQAhR#ZPV7LkKuWba60Kkfjf1lOK0Zx-IqXHLDfeF-zBL7AO0
Mirror 3 (smaller DL, only if other mirrors are down): https://store2.gofile.io/download/383d6066-319c-4cef-9869-02fb5c165c8f/76- BaS 28-Nov-2021.7z
2)** Extract** what you downloaded wherever you want
3) Copy the gamedata folder you'll find inside
3) Open your GAMMA RC3 folder and go to GAMMA RC3/Grok's Modpack Installer/GAMMA/modpack_addons
4) Create a new folder exactly named 76- Boomsticks and Sharpsticks - Mich
5) Paste the gamedata folder inside this newly created folder
6) Now go to GAMMA RC3/mods and look for a folder called 76- Boomsticks and Sharpsticks - Mich.
If you have this folder - delete it, if you don't have it - skip this step.
7) Launch the GAMMA installer with admin rights, press Download G.A.M.M.A. data and then Only install G.A.M.M.A. addons
8) If your issue isn't solved, press Download G.A.M.M.A. data and then Full GAMMA Installation in the installer.
that's the one you're missing and it's why you have that error, yes
Hello Can someone give me console command for spawning dr Chernov in Army W. His ID is ah_mil_chernov. Ikilled him
add "_squad" to the end of the ID you provided, then go to the building he's usually in, type the whole thing to spawn him in
do i need quest to find him from previous ecologist in dark valey? Becouse when I ask him for something else to do and he sent me to find chernov in AW ques
sorry my son is interrupting...
I can only help with the spawning part. As for how the whole quest thing works, it's out of my league
quest to find chernov failed automaticaly becouse he was dead so i just handed samples in dark valley and didnt took it and now I cant find this guy in DV
oh ok Thanks a lot I will try to solve this on my own
the only thing you can do is to reload a save prior to the current point to be honest. It's just how the quests work. If the NPCs you're supposed to meet/turn the quest in is dead, spawning them back into the Zone won't change anything, unless that NPC is part of a story questline, then maybe there's still hope. You'll be moved to the next stage of that quest. Otherwise, there's nothing else you or anyone here can do to help
how do I IMPORT mods from csv?
There was intense firefight in his area and I sniped him along with everyone else long time ago... I will try to spawn him but If it wont help entire Ecologist quest line will go out of the window.. eh but thanks for Your tip with console mayby it will help after all
you can only spawn him in using debug menu, not the console
here's how: #╭📖faq message
The method I provided is the "spawn at player", forgot to mention that, so be sure to tick that box. It's late now so I'm too busy to open up the game for the "spawn at smart terrain" method, but it should still work.
Also, try to use the "reply" button next time, because people trying to help on here are not here all the time. Just typing your reply right below theirs won't guarantee they will see it, considering the amount of traffic on this channel
It works, thank you very much!
Worked really good thanks!
hey my game started crashing a day after installing. I get a massive stutter followed by a black screen and then it crashes and after couple secs i get an error message (added screenshot). Im also having quite a few stutters ( tried all the recommned steps from the stutter command). Currently i have 337 mods active ( anti stutter activated)
Updated.
Checked all mods except mutants bleeding.
Now if I load save - bug is not present, atleast I don't see it present - I can see my hp, etc.
Thanks.
Tho - I lost all mod settings.
cri.
ah. yeah it'll reset everythign to default on the update, which for troubleshooting is often what we want to have happen
!backup
"Why does every update completely reset my keybinds/my settings/my mods/my stuff in general?"
G.A.M.M.A. has a default mod list to make sure everyone has the same things, everything goes back to default when you update or you do a complete installation, it's normal.
You can backup your keybinds and mod settings following this guide: #╭📖faq message
!custom
If you want to keep your personal mod list between updates: #╭📖faq message
if you change ANYTHING about the modlist - enable, disable, even if they are already in the modpack - in the future head to #🔨modded-gamma-support for support
and do not enable any mod in the Disabled category
Copy.
Thanks.
how do i install separately download boomsticks and sharpsticks?
help please
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
fuck.. didn't get here in time. that fix apparently didn't help Bar @narrow sparrow , he posted that in newcommer chat.
now we wait for the inevitable "didn't work"
im getting low fps down to 20fps in bar but im not fully utilizing my gpu at max or anything else is problem with game or my pc?
are you running DX11 or DX11AVX?
dx11
hmm. odd, what GPU are you running?
rx 6600xt
!amd
If you have issues with AMD GPUs try installing the dlls of the x64 folder of the following .tar.gz to Anomaly/bin folder: https://github.com/doitsujin/dxvk/releases
If you still have issues, refer to this guide: #╭📖faq message
Might need to not choose the newest dxvk version, try an older one if 2.0 does not work
Help, getting crashes in dead city. was running well until this morning.
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
ive already sent it in my message. modlist and log
wrong file. Send the .log or .txt @arctic musk
oh my bad
I downloaded and successfully installed, updated, and ran Anomaly. I Just downloaded the GAMMA file, unzipped into a new folder in my F drive named "Gamma". It gave me a folder named "downloads" after unzipping. I dont see a folder named "Groks Modpack Installer" (Step 5 under Installation). Do I need to unzip some other way?
don't actually tell them what they do wrong, just scream at them to read again, and again, to strain their minds 
you unzipped the wrong thing. Was the archive called GAMMA RC3?
Gamma_Addons_Downloads
From the first link "Mirror 1" under Install?
And what does this say?
Did #old-how-to-install tell you to grab that file? no, it did not. scroll down, or just press the link again, or try another mirror
Oh wait.. this time when I clicked it it actually gave me the file and didn't send me elsewhere. Weird
I see the correct one now.
browser cookies be like 
Could someone give me a tip? Game is crashing often
how to fix 1040 if i deleted 228 mod
i turned off it before
and the crashes continued
No crash in there. Get a crash then post the log
what was your issue?
1040 crash
I did that, not sure why my logs are not showing the crash then
I will delete the appdata content
that means nothing to me
i just loading a save and get 1040 crash
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
second
Whenever I get hit my game crashes. I can fire my gun just fine, so can the NPCs. As soon as I get shot or hit by an animal my game crashes. Ant help would be appriciated
Games crashing when I try to start a new game, full reinstalled twice and made sure I wasn't blocked from the moddb page.
don't get shot 
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
False alarm.
It's back.
On reloading save.
It's back again.
Fuck.
Pinging cause you one who helpd me, and I thought I might update u on this, if ur interested.
Anyway.
Hi.
When I reach a certain place at CORDON - my game BUGS very hard.
- I Don't see factions of people I aim at.
- I can't do quests properly(I have stuff in inventory, can't hand it)
- I don't see my own HEALTH, no matter what I do.
- When talking with npc - it doesn't zoom into them, like usual.
- Game CRASHES when changing location/loading save file.
I am looking for ways to fix it WITHOUT loading previous savefile.
Anyone?
This though is not tied to CORDON.
IT happened at other locations of game
Loading previous saves DIDN'T Work because it keeps happening.
I loaded save for 4 hours before noticing bug, went there through entire location, no bug.
2-3 hours later, same place, same bug.
What was done:
Game updated(gamma mods updated)
Mods that were intially there, above 336 - removed till gone back to 336.
IT was
Stutter mod
Mutant unstucker
Mutant Bleed.
Removed those mutant unstucker, mutant bleed - no change in problem.
Removed Stutter mod - Every quest got completed, some bugs disappeared, some did partially.
!k98
- Go in this folder:
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches - Copy these three folders (check pic)
- Go to your Anomaly folder
- Paste these three folders (check pic)
- Overwrite/replace all if asked
It won't delete your save files.
Here is a picture for reference: https://cdn.discordapp.com/attachments/1012510897136222293/1013951079538495528/k98.png
Expression :
Function : invalid_parameter_handler
File : xrDebugNew.cpp
Line : 1040
Description : invalid parameter
stack trace:
oi
THE ENTIRE THING LIKE THE GUIDE SAYS
i und i just dont copied ssry
all good, just upload it 
I followed the steps and it still crashes on game start up without any error.
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
@north turret @oblique pebble @silent wyvern Screen cap MO2
did ya read the install guide?
why are you missing 6 mods?
just turned off somthing optional
#🔨modded-gamma-support head there for support
!new
YOU HAVE LIMITED ACCESS TO THE SERVER.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge - 🔰 - near your nickname and (rightly) don't understand why half the server is gone, carefully read here (you need to remove your Newcomer role): #❗❗newbies-read-this
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
Yes, I also went through the installation video to make sure I was doing it right. Did I make a mistake somewhere?
hey whenever my game starts it starts the x ray monolith engine but then crashes when the game should load, just started doing it today and I downloaded it when 333 mods were the amount you needed
yes. both Gamma and Anomaly need to be in the ROOT of your drive
move them there
!move
KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
1) Open your GAMMA folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
2) Move your GAMMA folder to the new location
3) Run the installer as admin, click on Download G.A.M.M.A. data and then on Full G.A.M.M.A. installation.
Moving Anomaly:
1) Move the Anomaly folder to the new location
2) Go to your GAMMA folder
3) Delete ModOrganizer.ini file. It should be below the ModOrganizer.exe application
4) Launch Mod Organizer (click on the ModOrganizer.exe file in the same GAMMA folder)
5) Press OK, then Browse, then select your Anomaly folder. Done.
what are you doing that causes the crash?
just getting shot, or hit
I have no clue why you're getting that, gonna ask smarter peeps
gotcha. Thank you.
Reinstall G.A.M.M.A Medications Balance
it says "Mods installed with the old version of MO can't be reinstalled in this way."
can someone help with this crash?
send the whole 🪵
@narrow sparrow
#🔨base-gamma-support message
Meaning he needs to manually delete the mod and do !update?
Right click the mod
open in explorer
delete the files in the folder that opens
open Installer as admin
donwload gamma data
Install gamma addons
Read above
You guys i have to report something my game crashed so hard it corrupted my GPU driver
AMD card?
yup
First time playing warfare mode and I picked Mercs, using their dead city as my hub but every time I fast travel there they're getting constantly clapped by monolith, is there a way I can tone it down, or is it a bug?
i use driver 22.5.1 and it doesn't crash in anomaly
!warfare
G.A.M.M.A. isn't built with Warfare in mind and Warfare, per se, have bad perfomance, bugs, issues, etc., this is why it isn't recommended.
You can play it if you really want to, but forget about #🔨base-gamma-support, this channel support is only for G.A.M.M.A. vanilla (which basically means no extra stuff at all) and is also used by Grok for bug fixing.
Since G.A.M.M.A. vanilla doesn't use Warfare, you'll need to use #🔨modded-gamma-support.
Gamma was not designed to work with warfare
I dont remember witch one i used nut i haven't updated my gpu driver in long time downloading 22.10 now
@sharp bough What about Anomaly?
!new
Do this too
YOU HAVE LIMITED ACCESS TO THE SERVER.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge - 🔰 - near your nickname and (rightly) don't understand why half the server is gone, carefully read here (you need to remove your Newcomer role): #❗❗newbies-read-this
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
I meant gamma
Ik, just didn't know if Anomaly was okay with it either, well that's rough. Already doing good, just to know now it isn't the best.
We don't do Anomaly support here
Help, Mercenary Trader doesn't exchangee anything to me. I have Monolith Nosorog and it won't give me anything.
maybe mercs dont have nosorog exo
its says on 7
screen cap MO2
technically it should. Not sure why it doesn't
Did you repair the armor ?
Try running mo2 with admin rights
it's set to always run as admin
anyone have a fix to this? game was fine for over a week and then started crashing randomly with this
try a differnt dx version
My game crashes in red forest when i fight the SIN faction near the tunnel
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
i<m using default mod with stutter fix checked
works with dx10avx
screen cap MO2
running into an issue with the mortal sin questline, i'm supposed to see chernobog at the hospital and he's missing, gone back on two saves and i've had no luck, is there any way to fix that?
expand that for me so I can see more
Hi. Anyone knows about DAO here? And all bugs related to it
What do you mean by expand
make it bigger so I can see more stuff in that log
Got a Problem after Looting 4-5 bodies in game, I can't search other bodies and the ammo selection wheel and companion wheel disapear ( cant open ). i got 336 active mods
it cannot expand more than this
oops sorry i just figured it out here's the expanded version
Hey all wanted to ask if anyone knows a way to disable the head decap mod? Was wanting to turn it off.
This worked. Thank you so much.
did you try using a different direct X?
no but i can try
try just DX11
nah, sorry man
ok thank you i'll try that
so how do i fix my game so it runs at dx11 again? i tried to do what !amd said but no improvement and cant run dx11 or dx11avx now
Again, pinging you due to fact that you helped me with this issue and you might be interested in it in any way.
After Fresh installation of mods, bug was gone.
After I set up mod settings again - it was BACK.
I did reinstall mods again and it worked fine, w/o bug.
SO I started digging.
I changed settings one by one till I found what made game glitch the F out.
I Have my changes screened and apparently, when I Change my settings of DAO to something different - it bugs.
I do believe that DAO At Cordon>Meadow didn't spawn correctly or something and it might be fucking up game. Why there? Cause bug appears if I am in certain radius around area of that transition.
Why makes me think of that:
If I fast travel to southern parts of cordon or get to it through southern transitions(Darkscape(East)>Cordon, Swamps(South,East)>Cordon - it doesn't trigger.
If I travel Garbage(South,West)>Cordon - it doesn't trigger.
But
If I travel Garbage(South)>Cordon
or Approach farm after travelling Garbage(South,West)>Cordon
or Approach Cordon(East)>Darkscape
or Approach bridge
then Bug appears.
Im in process of finding out what setting makes game bug on me, and I'll edit this message to update it. Also a pic of one of problems this bug causes.
EDIT:
I Do believe I found it.
I Reinstalled Gamma mods, and gone in game.
In mod settings of DAO I checked Enable Anomalies Dynamic Behaviour.
Loaded up, approached buggy "Radius"/Location/etc. - Bug appeared.
Loading a save w/o Dynamic anobalies behaviour. No bug appeared.
Video of me doing it:
https://www.youtube.com/watch?v=F0so5Qq7qtQ
This is my constant HP status.
what you show in the picture is a typical behavior of the busy hand bug. I suggest you reset the MCM values to GAMMA default ones. That's one of the most reliable ways to get rid of the busy hand bug. Ironically, a full reinstallation is needed to reset the MCM to GAMMA default values.
For my case - it isn't?
I just reinstalled mods, changed settings in DAO - bug triggers
Well, I do believe.
If I understand correctly tho., lol
MCM Values tho? What's that.
Hey team has anyone been able to work out what's coursing my crash?
the settings for the mods/addons
like I said, a full reinstallation
something is failing to load. You are not using a default list of mods, head over to #🔨modded-gamma-support
any solutions? can't drink or eat and I just woke up from sleep
I was full hp and that bug happened
!busyhands
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
Load a previous save until it's fixed
same symptom as the guy above you
is it? that's busy hands, tho
well, can't eat, drink (can't interact), and the suspiciously empty body health system, it all adds up
I can shoot, interact with npcs, drink, eat, sleep,
still worth a try
yea, that's the busyhands bug. Tritski doesn't have that, or did I miss something?
I have same HUD problem
Bug with quests, bug with zooming in when talking with NPC
And some other shenenigans
his body health system has the same symptom though
But my problem lies with DAO, I do believe, and im testing it rn - changing settings one by one to see which one triggers my bug.
well... just as an FYI, I ain't touching you @signal current , You were working with veer before an I'd rather not fuck up what ever he was working on with you
His hint was only to reinstall mods.
It gave me something to stick with, and I spiralled it out from it
Can u guys help fixing these blocky fingers? It was oki at first and i think it broke after i was messing with ingame settings and reshade a bit.
texture quality maybe
Fucked up normals? Eeeeeh
Anyone know how to fix it? it shows up when i hit someone with a headshot
nop, still broken on both lowest quality or highest
guys anyone can help me with the anomaly device?
Just crashed
I also got this crash after installing the dxvk, and fixed it by reverting that installation. I didn't try dx10 or others, but disappointing to hear it didn't fix the shader compilation crash
Help, my weapons keep "disappearing" after jamming, or when i get shot/hit. What I mean is that I have no viewmodel, cant shoot, or switch weapons. I have no idea why
I Tried Re-Equipping the gun, and using an item. Using an item makes the gun appear at the hands of the actor, plays the animation, and stays there after the animation is over, which is when it lets you use it for about 2 seconds, before holstering the gun.
could you send me those few files i forgot to make a backup of them before replacing?
!busyhands
DO NOT ENABLE any of the disabled animations. These are the root cause of multiple animation loops that can break the game, to the point where you have to delete your current save file.
This bug is called "busy hands", an animation loop that prevents the player from interacting with the action keys, except for movement. This bug can also and especially be found with vanilla animations. Try not to spam them.
If you are still unsure whether you have it or not, try to do any of the following:
- interact with objects or people
- use a weapon (you shouldn't even be able to see it when you select it)
- open your inventory
- drink/eat/sleep
- check your HUD in the bottom left corner
If you cannot do any of this, it probably means you do have busy hands.
The only possible way to, maybe, remove it completely, is to disable any extra activated animation that was previously disabled. You will also have to go back to a previous save where you are 100% sure that you don't have busy hands.
Certified DISABLED animations that bring busy hands:
- Opening/closing backpack and any option related to this
- Animation for skinning mutants
- Disassembling objects with Left-Alt pressed
- Picking up objects where you can see the hand movement
try this, maybe it's the usual busy hand bug
I dont think its this, chief. I can talk to people, open my inventory, use items, and I can see my hud
well, you can try reloading a prior save, see if the problem is still there. If it is, I can only suggest a full reinstallation. It will reset everything. You can then load up your saves with the default values to see if things work properly. Those are the usual reliable fixes. Takes time, but works most of the time
just for reference, busyhands CAN occur and you still have the ability to open inventory and interact
I've had a case of busyhands like that before that I experienced personally, it's because I used FDDA anims lol
Are there really no other options? Also it seems to happen when I Reload/Fix jam, not when getting hit
It won't brick your save tho, that case
Yeah you may be spamming unjam
An anim loop usually causes soft busyhands
your anims overlap so X-Ray freaks out and spawns the gun inside you
I bet you if you turn on backpack anims rn, you'd see your gun clipping xd
Any reasonable way to reduce loadtimes?
Put gamma on SSD
Already on SSD
and buy a better CPU
damn
Prefetch?
So no matter whatcha do, you'll suffer load times
How do I turn it on
Look in your Anomaly Launcher
Prefetch Audio
a tickbox
Just remember to launch your Anomaly Launcher THROUGH Mod Organizer 2
Am I confusing you or do you got it? xd
Looking for the Prefetch Audio
Wait lemme screenshot it
Ah it's not here
That's your MO2
Mod Organizer 2
Refer to this, please #1026867123584258169 message
Third figure is whatcha looking for
Ok
Hey my audio isn't working anymore?
Well I can only give you a fix on our end, but it may be a million things on yours
Turn up volume
Anyone?
So @tepid crest look at this as well, third figure
look for the checkbox called "Fix audio problem workaround" or something along those lines
Other than that, I can't really help much sry
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
Audio is working for everything else besides stalker. I have already tried to restart it. It was working and than just stopped
It may be that your system just hates X-Ray audi uh what was it called again OpenAudio or something
The game started to crash every 10 mins
My game is crashing every time after an Emission starts to happen.
How do I access the Third Launcher?
Okay your savefile is calling something that it shouldn't be supposed to
which means you had a modified modlist before
Or something fucked up your updates
In either case, start a new save
!surgecrash
If you crash with this error during an emission: surge_manager_ignore_npc
- Open your mod list
- Find
265- NPCs Die in Emissions for Real - Right click on it, click
Reinstalland thenReplace
That sucks lol
I managed to get so far ahead
thanks!
If new save works, report back
play for a while
also feel free to use debug so you can give yourself a headstart
!debug
How to enable debug mode: #╭📖faq message
Nah if i'm starting all over i will start legit 🙂
Thanks anyway man i'll take a break before starting a new save
Take your time! Sorry for the lost save-
No worries 🙂
Hope the new one is much more enjoyable!
With the knowledge i have now i'm sure it will!
Hehe good luck!
Thank you man
How do I access the third launcher?
Whipping a guide for you just a sec
@astral condor check our treehouse, do you know?
Yesss congratssss
NOT THAT YOU DOPE 
Oh-?
I meant the message in the hidey hole
Ah gotcha!
I have 396 mods in MO2, and obviously my game crashes when I try to start a new game. I was looking around and I tried the fix that the !scrambled thing suggests but that hasn't been working.
Okay follow dis please
!default
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
!scrambled
1) Close MO2
2) Go to GAMMA/.Grok's Modpack Installer/GAMMA/modpack_data/
3) Copy this file: modlist.txt
4) Paste it in here and replace the existing file: [YOUR GAMMA FOLDER]/profiles/G.A.M.M.A.. If you don't have a G.A.M.M.A. folder in profiles - create it.
5) Now launch MO2 again
If this doesn't work follow the pic below:
https://cdn.discordapp.com/attachments/948840290263896075/960997447285477476/unknown.png
(yes follow scrambled again)
that doesnt seem to have done anything
Check your Mo2 profile
You got it now? xd
probably yea
https://www.youtube.com/watch?v=F0so5Qq7qtQ
Enabling Dynamic Anomalies behaviour might glitch the F Out of your game.
Anyone knows exactly why/how?
Ah that isn't exactly a vanilla feature-
I'd have to refer you to this #🔨modded-gamma-support
So, if I change anything in mod settings themselves - I need to refer to custom modlist?
Even with 0 mods added/changed in MO?
Game is constantly crashing when I try to load in and play. Just installed, cant play for 5 minutes straight without crashes so far
Yeah, some mods feature things that are disabled by default, for balancing reasons, compatibility, stability, etc etc. Like Warfare mode for example
The user.ltx and your MCM settings are considered "modifications", if you may
Huh, strange-
user.ltx - no idea what's that
MCM - Was pointed at it, idk what it does, etc.
Naw I'm pretty sure that shouldn't be the channel for it. I'm so sorry for the channel hopping xd
MCM is your mod configuration menu, found in your GAMMA main menu
user.ltx is your settings folder, ones that contain difficulty progression, graphic settings, etc etc
Anyway. I found reason why the fuck im experiencing bug that ruined HOURS of gameplay for me.
Hope it helps some else unlucky fucka.
Ty for info.
Ty for the report as well, noted down!
I'm taking this here as I can't figure this out on my own
My Shotgun variants (all non vanilla shotguns) are in a sort of doom position
middle of screen
and what is your resolution?
800:600

Look man
Sir, are you a time traveler by chance?
My screenshots aren't properly loading into discord so bear with shitty phone pics
the issue you have is fixed by using a proper resolution @elfin crescent
Yeahhh GAMMA isn't really optimized for 800:600 xd
Well gee thanks dad
4:3 generally is really wonky with GAMMA and hud stuff
Good lord thanks though I hadn't even looked at that that was my default
crashed again :<
no offence but... What kind of potato are you running your game on? 
You can set your resolution from your Anomaly Launcher, really handy! xd
All fixed now lmao
I got this for like 250 off amazon and I'm convinced the graphics card is actually a piece of cardboard painted up to look like one, everything else is great though
hello, I just noticed problem with zoom on RD -9-39 ISG, zoom on scope stops working after switching between guard granade launcher and scope (ip59). When I re-attach scope on rifle, it works again, till switch to granade launger again. Any ideas to fix it?:)
Looking at the xray logs, I feel like my game is having an issue with items missing:
!ERROR get_object_by_id | no game object recieved from id (21762)
post it here
Known issue, engine-level stuff. Can't fix really sry
ok thanx:) unfortunately on best rifle setup 🙂
Here are the last 2 crashes
which one is the latest?
the second one
second one has no crash
i accidently unloaded all my mods, im wondering if theres a way to only load default gamma mods
!default
Mod list
To bring your mod list back to default, inverting any changes made by you:
- Open the installer with admin rights
- Click on
Only install G.A.M.M.A. addons
Keybinds
To bring your keybinds to default, DON'T press the default button in the menu, you'll mess up everything.
Instead, do this:
- Go in
GAMMA RC3\.Grok's Modpack Installer\G.A.M.M.A\modpack_patches\appdata - Copy the
user.ltxfile you'll find in there (note that every change made by you in youruser.ltxwill be reverted to default) - Paste this file in
Anomaly\appdata
thanks
second one hung at a black screen with my PC locked up, I had to force close it when my PC started responding
yea so it didn't write a log 
screen cap MO2
what is your install path for Anomaly
C:/Game/Anomoly

That the issue u think? I had already installed the game before opening the discord >_<
!MOVE
KEEP IN MIND AND REMEMBER THAT THE FOLLOWING FOLDERS ARE -NOT- SUITABLE FOR ANOMALY AND GAMMA, DON'T USE THEM.
Desktop, Downloads, Documents, One Drive, Program Files/Program Files x86
DON'T. USE. THEM.
DON'T.
Moving G.A.M.M.A.:
1) Open your GAMMA folder and ONLY delete the "mods" folder you'll find inside. Leave the rest untouched, you don't need to delete anything else
2) Move your GAMMA folder to the new location
3) Run the installer as admin, click on Download G.A.M.M.A. data and then on Full G.A.M.M.A. installation.
Moving Anomaly:
1) Move the Anomaly folder to the new location
2) Go to your GAMMA folder
3) Delete ModOrganizer.ini file. It should be below the ModOrganizer.exe application
4) Launch Mod Organizer (click on the ModOrganizer.exe file in the same GAMMA folder)
5) Press OK, then Browse, then select your Anomaly folder. Done.
If moving the folders does not work try doing this:
Delete the G.A.M.M.A. Actor Damage Balancer folders in \GAMMA\.Grok's Modpack Installer\G.A.M.M.A\modpack_addons and \GAMMA\mods.
Then restore the mod:
- Disable antivirus temporarily
- Open GAMMA installer as admin
- Click "Download G.A.M.M.A. data"
- Click "Only install G.A.M.M.A. add-ons"
here comes da bean....
Thanks!, I will see if this fixed it. I saw the guide on where to install Anomaly but it was after I installed it based on the moddb recommendation to do /Game/Anomaly 😓
God dam you other people...
@sharp bough The purple name! YES! Congratulations! Well deserved and well earned! 
Was checking in and was positively surprised. No problems today.

I am special! 
You need to be more confident, yo! But anyways. I was going to the game chat because I actually have a question about the game, lol, not a mod issue though. Have a wonderful day.
I asked this yesterday with no reply since the chat got flooded with off topic, does anyone have an answer for this?
Blood Red Sky quest crashes consistently upon killing the last enemy. Any way to complete it with debug mode?
check MCM menus. I think I saw something there that might help, but I can't recall
Maybe these? not sure though, I also can't guarantee disabling them works.
You could try asking in #🔨modded-gamma-support
those are adjustable settings in MCM
atleast some are
oh, well he best look in there first then
post the log
!crash
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
I dug through them and can disable the jump/weapon rattles, but not the footstep
There are two footstep sound mods in GAMMA, one is called 20- EFT footsteps and tinnitus 1.1 - Souvlakii and the other G.A.M.M.A. Footsteps, you could try messing with those
is there a way to reset nps? or de agro them ? i killed a merc last time i was disguise and now part of the base attacks me
go invisible and set their goodwill manually with debug mode
you weren't by chance putting an artefact in a container?
no I was blasting the renegades with the M249 SAW
anybody know where to find the flam artifact
#╟🔰☢newbies-chat this is a tech support chat
336 mods active?
i know about debug how can i set the good will
!goodwill
trying to change your goodwill with a faction: #╭📖faq message
ty
336 minus two which I've deactivated manually. Also, false alarm - it worked on the 3rd try somehow
Hello
I've got some question
I've been to Dead City under disguise and everyone was friendly
Then I've cleared it without disguise (as a renegade) without killing/hurting any important characters (100% sure, was always looking at the names before pulling the trigger), but for some reason they remain enemies when I switch back to the disguise
Will they become friendly again after some time? 🤔
Oh - actually the DC guide died to a Chimera, but I guess that doesn't matter
can't help ya there, not to familiar with the disguise system
I think if you have yet to shoot at them (the important NPCs) then they will cease aggroing you after some time, then you just need to re-apply your disguise
Are you sure though?
Wouldn't like to continue playing just to find out later that my save is screwed 
Guess I'll reload the save before this massive genocide and try again
I think, you could test by leaving the region then returning, or sleeping somewhere real quick
Did that - still hostile
Guess I'll need to clear it again 

Am I able to change the health system display keybind? It's currently "H" but I want to change it and dont see any options in MCM or settings?
I'm not seeing an option for that anywhere :/
Darn..
I posted yesterday about losing all my fast travel points, turns out the game actually cleared all of my active quests as well. It feels like it soft reset almost. Any way I can restore my story quests?
as in, your task bar, inside the game is empty?
Load a previous save
Yes. Yesterday while playing at some point the game removed all of the green house icons and all of the active quests, didn't realize until much later (I was exploring and not doing quests). I'm not sure I have a save from before it happened, but I'll look
Oh it also cleared the in-game achievements like the artificier expert
Hello, I have problems with the game for the second day, I'll play a little and this happens (screenshot) how to solve ? !blackscreen didn't help
where should i type the command ?
@sharp bough @brisk zinc I do not have a save prior to the issue. Can I use the debug menu to force start/finish quests?
force starting/finishing the quests can be a bit iffy. I'd suggested not doing that if you can
@sharp bough Hello, I have problems with the game for the second day, I'll play a little and this happens (screenshot) how to solve ? !blackscreen didn't help
I saw it, no need to ping me
your issue is that you have 347 mods, why?
Gotcha. At this point I think that's my only option sadly, it took me quite a while to realize what had happened as stash locations were not affected
Why do you have more than the default 336 mods?
!task
Having problems with a certain task? #╭📖faq message
follow that guide to auto complete quests then
Thank you
Hello everybody, I just had a strange "bug", I'm not sure whether it actually is one, where all white stash locations are no longer displayed on the PDA.
They are still there, I checked to stashes that I still knew from memory, but only the green ones are displayed on the map.
Did I switch a setting by accident or is this a known issue?
Some edits, Russian localization, improved skill system, included stores
ask for support there
I've only loaded the GAMMA modlist per installation, does that count as custom?
yes
Thanks
is this on?
Oh... that was a quick fix XD
Never realized the options before
#custom-mod list-support is where ?
Thanks for your help!
!new
YOU HAVE LIMITED ACCESS TO THE SERVER.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge - 🔰 - near your nickname and (rightly) don't understand why half the server is gone, carefully read here (you need to remove your Newcomer role): #❗❗newbies-read-this
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
and you'll see it
Did you find a solution to this problem? I'm having the same thing happen
did you give Noah the shot gun?
dang... Was hoping that'd be a fix
it worked for me when I did the shotgun quest first
Having problems with a certain task? #╭📖faq message
I think this is the task ID "drx_sl_zat_b18_noah_default_task"
posting again to see if i can get help: So I did a full reinstall because my shaders were screwed up and now my scope visuals look weird. Theres no movement blur or anything like that. Before, when I scoped in on a weapon, the parts of the screen outside the scope were blurred, and when moving/gun recoil, the viewing angle of the scope would move, like a vignette.
sorry, I'm not sure why that might be an issue
is that feature an option of the reshade or maybe a graphical setting that got turned off for some reason
reinstalling these 2 mods might fix it but I can't be certain
It didn't work, Grim. I guess the task will just sit there

dawg idk wtf happened but now the game wont launch the anomaly launcher opens but clicking play does nothing
how did you reinstall?
through mo2
Send your crash log where it was asked IF YOU ARE BEING HELPED, not inside #🤖bot-commands if you're using this command in this channel, you won't be helped, it's literally just a channel where you can use commands.
The file is inside your Anomaly folder, this is the complete path:
Anomaly/appdata/logs.
This is what you could find:
xray_yournamehere.txtxray_yournamehere.log- `xray_yournamehere
You just need to send ONE of these files where it was asked. It's either ONE file with .txt or .log.
DON'T send anything with .bkp at end.
Drag and drop the file inside the Discord channel, Discord will handle it for you.
Make sure you're not using any extra mods.
lowkey i could just try a whole new fresh install i dont mind, i know exactly what settings were tweaked from default
That might be your best move, unfortunately...
I did say that I can't be sure if those were the right mods 
all good homie thnx for tryin
should i do an install thru the launcher or u think id be better off deleting all dirs and starting from step 1 of #old-how-to-install
try without AVX
that worked
@sharp bough I come to you again with a problem. Save meee
The text for action prompts "(F) talk" "(F) loot" doesn't appear any more. I haven't changed anything in options. Is this a bug?
Actual explanation at the bottom but simply put:
Do you have a good CPU? Use AVX (if you have a crash, it probably means your CPU doesn't support this function).
Do you have a good GPU? DON'T use AVX.
Do you have both? Try for yourself, see what's better.
Actual explanation:
AVX is a way for your CPU to do calculations on a large array of data simultaneously. This is the same kind of job GPUs are primarily meant for.
So if your GPU is decent, AVX is (in most cases) outclassed by the GPU itself. Best way to know which is better for you, personally, is to try both versions and see what does or doesn't crash/performs better.
amd things i guess
OH
Yeah there is a fix for AMD GPUs but it might break stuff even more lmao
!amd
If you have issues with AMD GPUs try installing the dlls of the x64 folder of the following .tar.gz to Anomaly/bin folder: https://github.com/doitsujin/dxvk/releases
If you still have issues, refer to this guide: #╭📖faq message
But you can just play without avx
nah i got an nividia gpu but an amd cpu, a crossbreed if u will
Or something is fucked with your avx .exe
Not that I heard, try the easy thing of making a new save and reloading
better yet, restart the game
Hey guys, I wasn't able to find this issue posted before so hopefully it hasn't been asked too many times, but does anyone know why my game will have a "purpleish" tint when I look around sometimes? I have screenshots as well if that helps :))
sounds like a shader issue but I'm not familiar too much with those issues so you may want to wait for someone else the check in
Okay, thank you! Also here is what it looks like in case it may be helpful to anyone to see
maybe its me but i dont see anything in those pics
You running a DX11 AVX?
tree is a bit purpleish
Yeah it's actually seen more in the ground I guess. the first picture is normal and the second is more purple
And I'm running DX11 not AVX
Nope. Still present. Reloaded a save and restarted the game. Only campfires have the text (Ignite) (Extinguish.) So far everything else doesn't.
try AVX and try other Direct Xs see if those change
also
!new
YOU HAVE LIMITED ACCESS TO THE SERVER.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge - 🔰 - near your nickname and (rightly) don't understand why half the server is gone, carefully read here (you need to remove your Newcomer role): #❗❗newbies-read-this
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
status bar working properly?
How do I access the status bar again? What key is it?
Oh this. Yeah it works as intended. See no problems with it.
task bar in PDA ok?
All looks okay. Only difference is I upgraded the PDA to V2 in the game, but even after completely removing the PDA it changes nothing.
Press Num Enter
i did the thing but now it dosnet show my mini map and ammo in my mag anymore
why did you do it..? 
also press num enter again
i changed the goodwill for merc but now it dosnet show my mini map and ammo in my mag anymore
oh
I feel so stupid... I haven't even pressed it, ever. 
Thank you!
same feeling bro

You'll be fine. Grim is more stubborn than I am when its about fixing issue. I am almost certain you will be helped if you don't give up.
So I tried DX 10 and DX 11 with AVX and nothing changed. Would this be something that I should post in the installation problems thread thing? 
no, just wait for someone smarter than me 
do this too
!new
YOU HAVE LIMITED ACCESS TO THE SERVER.
If you have just joined the server, read this: #❗❗newbies-read-this
If you've been in here for a while, launched the game AT LEAST ONCE, yet still have this badge - 🔰 - near your nickname and (rightly) don't understand why half the server is gone, carefully read here (you need to remove your Newcomer role): #❗❗newbies-read-this
DO NOT REMOVE THE NEWCOMER ROLE IF YOU HAVEN'T LAUNCHED GAMMA SUCCESSFULLY AT LEAST ONCE. YOU WILL BE PUNISHED FOR DOING SO.
So what exactly does the shaders portion of the mod list do
say you disable it and play on dx10
lmaooo okay sounds good thanks for your help so far!
make the game more ugly, disable some reflections and other shiny cool things. It can also just break the entire game if there's a mod that's reliant on it
Thanks mate
GAMMA has crashed so hard that my HDMI output isn’t working, usually it comes back on after reset, anyway I can fix it before I assume the GPU is lost?
amd GPU?
ye
5500 XT
usually it comes back on after a hard restart but it isnt giving an HDMI output
I'm not an AMD boy but a mod was just talking about them here
#🔨base-gamma-support message
He also suggested to try and play on DirectX with no AVX
so
there's still a problem, my main monitor is down
my GPU is giving off an HDD or whatever but no HDMI
i assume you have updated said drivers?
recently yeah
