#medieval-mc-fabric
1 messages · Page 315 of 1
single player shouldn't be doing more than 10 gigs, and even then it can fuss 8-9 is the sweet spot
9 gb ram and 2 ppl at once my server is choking
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
https://mclo.gs/HDjgGMF i have error
Please read the full contents of the #get-support channel for us to provide assistance.
faes after fucking aggroing a mutated creeper boss to the friend group whole base blowing it up:
Anyone?
It still crashes...
Medieval MC 3 - v17 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- ATLauncher
- No
- v17
- No
- Same as before, It's always as soon as i click play on the world, it will load for like 10sec and then crash everytime without fail.
latest.log | crash-2025-02-23_12.35.36-server.txt | atlauncher.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
I can always create a new world but once i close the game and then later boot everything back up again, i will refuse to load the world and then crash, everytime.
hey all - anybody know where i can find the server files for download on v17? Curseforge only has v16
I'm on MMC v1.21.1 v16 and I'm not able to place the Assembly Augment from the Affinity mod. I'm not sure if I'm doing anything wrong.
Figured it out. The visual crafting bench mod was breaking it. I had to spawn in a crafting table block that was the regular minecraft kind and then disable the automatic conversion in the server settings for the vanilla crafting tables. Then I was able to place the assembly augment on it.
Whats this used for?>
what world type are you picking?
@dry sandal
Do exactly what it says (throw it) and it'll summon a boss.
...that or it goes on the old moon altar to summon
At this point i dont even know whats goin on i thought i messaged here but messaged other channel with the wrong modpack name. Ye so mmc3 whenever i leave and join back to a world my extra hp from skill tree goes away. Like normally i have 43 hp than when i join back it drops to 20 with max 43 still so the points doesnt reset but extra hp doesnt register i suppose so makes me consume food
I've done both BetterX and Default, same problem with both
Fixed, fyi you can always find these on the modpack webpage under additional files and that’s generally a better place to download them
Is there a way to obtain this??
it has no crafting recipe nor any clues where to find it
@ me if you know something
Anyone know how I use the forge?
its creative prob, it has infinite damage and 25 attack speed which is insane i doubt itd be normally obtainable without cheating
this is the medieval mc channel
mb clicked the wrong channel, im sleep deprived dont judge me
Whats the best weapon for a valkyrae?
Ik spears are really good but what spears specifically
But Why not say it there
Like the items in the images above
So i keep getting this crash report on my server which is preventing one of my players from being able to log in without crashing the server. I unfortunatly do not have any backups where he isnt near the mob that is causing the problem if anyone can help me figure out what i can do to stop it from happening i would very much appreciate it thank you
Uploaded crash-2025-02-25_00.08.41-server.txt from @edgy summit to mclogs: https://mclo.gs/pRnKPxH
Yo, what's the deal with the MMC3, 4 and 5 exactly ?
is it just because they use different "engine" ? (fabric forge etc)
Please read the full contents of the #get-support channel for us to provide assistance.
not sure, to some people like me it seems pretty self explanatory so maybe thats why, devs mightve just thought it was obvious.
this mf almsot break all my armor in 10 seconds 😭
Rust
can claim and forceload
thank you! i was looking through github for it for some reason 
wondering - is there any way to (and how, if possible) edit the config to make actual meat items edible for alfiq?
or generally for any carnivorous diet
this should already be the case, do you have a datapack named "Origins Expanded Foods" in /config/paxi/datapacks/?
let me have a look!
yes, Origins_Expanded_Foods_v3.0
seems to be only AdventureZ & Tide that show meat/cooked meat or fish items as inedible, even as carnivorous
other foodstuffs are working fine
you should be able to edit the tag files inside that datapack and add any missing item id's
please let me know if you find anything else
got it. should i do it on both the server files & client files?
server only will work
For almost 2 days, I have been encountering the same error in both Medieval [FABRIC] versions 1.20.1 and 1.21.1 due to a persistent issue. The error may seem like a classic one to you, but please take a look at the spark analysis- the problem always occurs after I run the ./start.sh command. In short, I get the error when trying to start the server, and it doesn’t fully launch, so I can’t connect to the server at all. Below are all the server properties and components that you need to know:
Operating System: Ubuntu 22.04
Processor: AMD E5 20vCORE (yes, there are 20 processors)
RAM: 32 GB
Storage: SSD, 150 GB, IOPS-34000
The classic error I keep getting:
[16:29:50] [Server thread/WARN]: Can't keep up! Is the server overloaded? Running 7012ms or 140 ticks behind.
Additionally, alongside this error, I am also encountering the following message in version 1.21.1:
[20:53:43] [Server thread/INFO]: [STDOUT]: Lithium Cached BlockState Flags are disabled!
I have tried all the adjustments for the Java arguments and performance settings from the server.properties file, but I still haven’t found a solution. Even if I set the server.properties settings to their maximum with these components, there’s no way the server should be bottlenecked. Yet, no matter what I try, nothing works. If there’s an EXCEPTIONAL CASE in this situation, I would really appreciate it if you could let me know.
getting this lag warning once right when the server starts is normal, it’s caused by some of the tasks that run at the end of startup
this means your server is running though. what error message do you get when trying to connect?
I dont know if this is the place for this so sorry if im using the wrong channel or something. I just want to make a zoo, is there a good way to move animals (especially larger ones) or will i just have to brute force it?
Connection timed out: getsockopt
oh fr? tyty
is no biggy has been workin for a friend of mine
I like that the compass can just be worn like a ring but maybe the info should go somewhere else?
thanks we’ll update that, thought it was already moved
i think this is usually just a firewall or port forwarding issue, network access related of some sort, nothing to do with the install
how do i do it?
nvm i got it thank you so much
hey guys i have a question regarding the fabric MMC1 where can i ask it?
here
What is the best weapon for a valkyrae to use
Does the cursed sword from the mine cells mod kill you instantly if u take any damage?
yes
cool thanks
ngl I'm not certain if I was using fabric or forge medieval mc, but after trying the pack for an hour or so I've discovered a bug.
where wearing a mutant skeleton skull prevents you from shooting a bow
not sure why or how but I'm just throwing that out here before i go to sleep
guys I got my own medieval mc fabric 1.20.1 server but i got a problem with the zenith arrows it destroy everything that is claim or unclaim and my users and friends are raiding their bases as animals can you help me??
please
and thank you
Hi, I've just started server with my firends and one of them found this somewhere
"For NEW PLAYERS that plan to play the MIDIEVAL MINECRAFT PACK Forge/Fabric remove the mod called TOUGH AS NAILS in the mod pack. The Mod adds Body Temp to the game. Your body Temp will keep going up til you Die or til you keep your self cool at all times. Even if you are in the PLAINS BIO your body Temp will keep going up and up til you die. The mod in the pack does not let you know of these effects at all or how to control your body temp. I died at least 34 times before I had enough and spent hours looking up why I kept dying Randomly for no reason regardless of being in a safe place in the world."
Can someone tell me if this true?
I feel like the temperature gauge does a well enough job to tell you that
it is a bit of a nuisance though, agree
Why is there a game crashing glitch that happens when you spawn the Inigo boss from archon? I dont even know what to do, every time i log in it crashes
i agree with this
Ok. thank you
Anybody know how to obtain this? I have a master level cleric but havent got i
Please read the full contents of the #get-support channel for us to provide assistance.
i was able to get it to work, tyy
i just had to /kill it
Master clerics have a chance to sell it, no guarantees
oh so if he doesnt i have to make another?
if so ty ty
makes sense
Yes
Is there anyway to deal with those acid throwing mages
And not have them break your armour?
Guys i got a bug in MMC1, all my levels reset when entering the prison cells but leveling up still costs just as much as before
is there a way to reset level?
It's probably a visual bug
Do you know by any chance how to cast spells from ur spellbook?
No clue. Never figured it out.
damn
sorry for bothering so do you know if anyone could help me with my skill points issue?
i tried resetting them with the orb thingy and i didnt get them back
Never played this pack, so
ah okai thx
Some one can help me with this? Please?
you can disable them in the item obliterator config
Thank you... you always been like a sort of God.
I made another 2 and they both didnt get the evil eye trade up to master level, is it just all chance? or is there also something specific to do
nvm got one finally
took 7 lmao
but now i need a rabit foot 😭
Hey sooo, do rabbits not exist in this game btw?
They do, forests and taigas
ive spent the last 20 min in forests and taigas and not a single rabbit 😭
Hey @midnight citrus , Is there a way to disable the seasons in this modpack 😭 growing plants just sucks
there should be an option to disable season change in the fabric seasons config, also you don't need to ping just to ask a question
oh okay ty
and my bad i wont do that anymore
How do you go into the config for a mod?
does the server have to be stopped?
edit the file in the config folder with a text editor
the server will probably have to restart for it to apply
mmc3 when i try to harvest rice with a knife it just gives straw. Is it a bug? If it is where should i send it?
I have a question, does anyone know how is the mod called from "Medieval MC [Fabric] MMC3" for that great healthbar 😭
hey guys can we play multiplayer without buy a server ?
it’s part of the medieval mc core mod
the bars will be split off into their own mod soonish though
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
not sure frankly, i would ask on the farmer’s delight discord
I hope so, if it happens could you ping me if you wont forgert?
hey guys when my friend try to connect to me via the open to lan mode there is this error, can someone help me please
yours or your friends extrasound mods are either different versions or the one oppening the Lan has the mod while the other doesn't
we instal the same modpack and we have play already on ity
but when he disconnect reconnect he cant reconnect after
did you update the mods?
0 update
ok
he just up his memory dedicated
because it says sound mapping issue
and you know how i can fix it
ok yw 🙂
i will surely forget, i got a lot going on rn :p but if you follow my CF profile you can get notified of new projects, it will most likely be the next one i upload https://curseforge.com/members/muonr/
Hello, can anyone tell me what I need to do to be able to upload more mods to your modpack to play with my friends? Now I get an error that there are added mods and crashes without launching
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
What if I want to add a mod not for network play, but just another one
it should be fine unless there are incompatibilities
if you need support with this though you should make a thread in #1061339968691257466
Okay, thank you very much! I'll double-check it again
Guys does anyone know why in the mmc mods i keep being teleported to random locations when i go to nether instead of the portal??
does this damage booster from xp have a cap?
can i just do 200 damage when im at 200 levels or...
no cap but a hefty logarithmic formula and ideally you would trade for enigma res 3 and combine the two to get enigma res 4
ohh i see
is it very noticable like 80 percent or something
or 20
it's pretty noticeable at first, basically if you get 1000xp you're good, because it's too slow-going after that
i see..ty!!
Hello we are playing on Medieval MC [FABRIC] MMC2 v27 modpack, tho there are very few custom structures generated, most of the "bigger structures" got generated more than 20k blocks from spawn, in older versions the structures were a lot more dense, here we travel like 3k blocks just to find a village or a tower... We pre-gened a 10k x 10k square and there are mostly just biomes and very few structures... Is there a way to increase the spawn rate of some of them? Dungeons arise structures also spawn like 50k blocks away from spawn...
And is there a way to lower the chances of ice and fire dragons to spawn? we sometimes get like 5 dragons in a 10 chunk radius
you can modify the sparserstructures mod config
and remove the wda less structures datapack in modpack files -> config -> paxi -> datapacks
hi hi, anyone know how i could pull mobs slowly without even necessarily seeing them?
i chose to keep my tree leaves passable but the bees remain dummies who can't path back out
currently playing battleship with my fishing rod
does vein mining not work?
i have the enchantment but it will not mine the whole vein
?
instead of working only on ore veins, it can be activated on any matching block using the ` key
Anyone know what texturepack mmc1 uses? with the default items etc. cant find it
does the carry on mod work?
yup
Does it work on villagers too cuz i tried it on one and it did not work
disabled for villagers in LPS packs normally
Ohh k
Is there any possibilty to tame big dragon and tp tamed beasts between waypoints?
You can lure them with emerald block
k thanks
- Anyone know why the siren class labeled as immune to freezing is still suffering from damage to the point of death of freezing?
just confused when its stated the siren origin shouldnt be affected from freezing at all
- Also unsure as to what mods adds summons for the revanant class to work with or pair with as i dont see a a specific mod for summoning
Hi, I was trying to interact with the filling cabinet but I don’t understand how it works. Does someone know?
Is there any free way for me and my friends to play together?
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Hello, I need help, boss is bugged and I am stuck in his room, what can I do?
hey guys i cant change my gamma on medieval mc can someone help me please ? thx
I have already change it in this path in option.txt but nothing change in my game
I can't find the tentacles that Conjunctivius spawned
The tentacles can rarely get stuck if you're unlucky. They should die out on their own after a few minutes, so waiting might be your best choice.
If you're in a hurry and have admin permissions, you can use the /kill @e[type=minecells:sewers_tentacle,distance=..128] command to instantly remove them.
Can I use "Fabric Chunk Pregenerator" or it will crash my server?
yo, im running this modpack on a i7 8700 with 64gb and it runs really poorly, anyone knows how to fix this?
profiler link
i fixed it, it was due to a bad server flag
could you explain?
the garbage collector wasnt garbage collecting properly
this fixed it
does anyone know why mca reborn doesnt work?
how do I make it so these guys just stop spawning in my base they wont let me sleep...
the mod page says its a rare spawn

you should be able to stop them with a magnum torch
@simple smelt maybe these could respect light level when spawning?
ah ok thanks mr utorrent
||use tixati||
Yeah i didnt realize they spawned in the light as well
In my experience they didnt spawn in the light but i guess it can happen rarely
that also just seems like a lot lol, i wonder what's going on
i sort of figured they only spawned in new chunks anyway?
I upped the spawn rate for them but i guess i upped it too much
I can update real quick if you want to have a hotfix
Oathsworn paladins and Extra Spell attributes has some minor fixes too, but nothing gamebreaking
probably not going to hotfix, will update thursday though
Gotcha, just tell people to update the mod early if they want to lower the spawn rates i guess
Or they can enjoy the loot lmao
In fact, the newest update should have the lowered spawn rates
forgot to put that in the changelog
Download the newest version of the mod, it lowers the spawn rates
why can I create a world even on neofroge 1.21.1, this is the fabric one 1.21.1 too, I can open the lobby but when I openn/create world it crashes
already tried loading 1.21.1 on vanilla mc and loading a world
did not messed with the modfiles or any files didnt add anything
https://mclo.gs/8JoNqdc
https://mclo.gs/dPirGMP
https://mclo.gs/uxBKrez
https://mclo.gs/cgQOVsx
logs from top to bottom
Hello! Help, please! When I go to play the modpack again for the second time, my game crashes. This also happened with better mc neoforge yesterday, but I had chalked it up to it updating and moved on. However, this time, there were no changes at all and the same exact thing happened. I load the modpack, mc opens fine and I go to resume my world, but then map loading doesn't even go past 0% before it crashes, saying: "The game crashed: exception in server tick loop Error: java.lang.IllegalStateException: Biome source config is not set". I have no idea what could be causing this. I haven't touched the mod files. I updated my drivers and launcher, rebooted multiple times, but it didn't seem to work.
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) --Curseforge
- Have you changed the modpack in any way except mods? --none at all, wouldn't even know where to start
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash? --on a fresh install it works perfect no matter how many worlds I create. the crash happens when I go to resume or even create new worlds the next day.
- What steps cause the crash?
latest.log | crash-2025-03-02_07.47.08-server.txt | CurseForge: launcher_log.txt head / tail (~32k lines) | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
you need to kill the tentacles
add the gammautils mod
use Chunky instead
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
if anyone else is using bisect hosting do you know where to find the configs for the origins?
im looking everywhere and only a few configs are showing up for some mods in the pack
the config folder
but note that to tweak origins you'd need to code a datapack
i just want to edit the ones that are in the pack, my friends wanted to remove some of the drawbacks to certain origins you guys added
dangggg
Does anyone have a mage build for medieval mc? With the skill tree and equipment. If someone does could you dm me whats the build, appreciate it
thats strange though, before i swapped to bisect i was able to get into the configs of origins on pebblehost
i very vividly remember disabling some features of the elytrian origin
then it'd be in the config folder
the same files generate on any host
this is melting my brain
have you launched the server yet on bisect
currently trying to locate every client only mod in the modpack and remove them from the server files 💀
thats not necessary at all
you can just launch
would u mind taking a peak at my crash logs?
dont delete anything
Please read the full contents of the #get-support channel for us to provide assistance.
i have looked already sorry if im being difficult 🙏 im just really not sure what to do the server keeps crashing before it can even start and i dont know how to read the logs for the problems
please answer the support questions so i can help
- 1.20.1
- curseforge
- added a few mods (mca reborn and some furniture mods)
- im using v27
- always crashes
- i simply dropped the mods into the folder, restart, never starts
any tips for optimizing performance of MMC3 on a laptop with 8GB of ram?
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
please send logs
also how did you install the server?
i removed all the mods i added in myself just in case that was the issue and just did the plain modpack as you guys made it and its still crashing here the crash log
and with the install all i did was install the fabric version that matched the modpack and then dropped the jar files into the mods folder then started
Uploaded latest.log from @sonic robin to mclogs: https://mclo.gs/kfo3ENQ
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
ty!
yeah im seeing that now 💀 this is my first time using a modpack i didnt make myself
what does brewers dream do?
Is there anywhere or any youtuber that does Medieval mc builds?
alright so ive gone through the videos and its still pretty complicated for me it feels like theres a step missing on how to transfer those files onto the server
is there a way to download the modpack on the website on to my existing server so it can all the set up for me? or am i locked into doing it manually since i bought the server by itself with no preinstalled modpack
I imported everything to atl and it did the same.
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) --atlauncher
- Have you changed the modpack in any way except mods? -no
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash? -only at the start
- What steps cause the crash? --loading into any already created world
latest.log | crash-2025-03-02_12.23.01-server.txt | atlauncher.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
add creating new worlds to question 6 too 😢
you can contact bisect support for help
it'd be easier as they have direct access
what is your world type set to
whelp, newest version still they are everywhere, about 30 spawns every game day. burned through 8 armor sets
I'll fix that then
Alright I think I fixed it, the file is uploading on curseforge. Note that existing ones will not go away and need to either despawn or otherwise go away
ok thank you
Also if youre playing on a server it needs to be installed on it as well
Medieval MC 3 - v17 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) Prism Launcher
- Have you changed the modpack in any way except mods? No
- v17
- Have you ever gotten past the crash condition without crashing, or does the game always crash? It always crash
- What steps cause the crash? My pc abrupty turned off while i was playing, but now i try to lauch the modpack and it crashes instantly
latest.log | crash-2025-03-02_11.46.06-client.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32manother_furniture-fabric-4.0.0.jar[0m
[2;32mbushierflowers-0.0.3-1.21.jar[0m
[2;32mcamerautils-fabric-1.21.1-1.0.16.jar[0m
[2;32mMobLassos-v21.1.0-1.21.1-Fabric.jar[0m
[2;32msquatgrow-fabric-21.1.0+mc1.21.1.jar[0m
[2;32mtrade-cycling-fabric-1.21.1-1.0.17.jar[0m
Well, i upgraded the version and it works again, thx anyways
can you combine spell books for the sake of easy of spell casting ? 1.19 version
in mmc it's the default one, but I tried to make a flatworld creative and that one got to 4% before crashing. also, when it did this with better mc the worlds were betterX
You can't do it in 1.19.2, in 1.21.1 you can do it but only in creative
that sucks
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- curseforge
- removed some only client side
- v18
- always crash
- trying to join the server
latest.log | crash-2025-03-02_21.22.17-client.txt | PolyMC-0.log | crash_assistant_app.log
Mod list changes beyond the modpack:
Removed mods:
[2;31mBHMenu-Fabric-1.21-2.5.1.jar[0m
[2;31mdrippyloadingscreen_fabric_3.0.11_MC_1.21.1.jar[0m
[2;31mfancymenu_fabric_3.4.6_MC_1.21.1.jar[0m
[2;31mLuna-FABRIC-MC1.19.X-1.0.1.jar[0m
earlier i got a disconnect
java.lang.IllegalStateException: Missing key in ResourceKey[minecraft:root / minecraft:damage_type]: ResourceKey[minecraft:damage_type / frostiful:icicle]```
yeah that seems to be the same error as in this log
do you have the same version of Frostiful installed client and server side?
yea just checked actually
also fyi this is a fresh install from curseforge server files aswell as a fresh client install from curseforge
does it only happen if you remove those mods?
havent checked all the mods i removed are client side lemme enable them give it a shot
nope still same error
how did you install the client/server, exactly?
sever is on biscect v18
client is polly mc v18
why did you say curseforge launcher lol
that’s still odd though
try ATlauncher
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
cause polly mc used CDN of curseforge no ?
sry ping
yeah but some launchers just have various odd niche installation issues with some packs
aight ill give it a shot thx
out of curiosity i tried on curseforge launcher and same error
i was able to get everything in order ty for the help ^^
did a test on my current local server exact same files just did a sftp from biscet. ran the excat same files and it works. maybe this is a Bisecet issue?
v16 also same issue on biscet for some reason
last time I saw this it was a server install issue yeah, maybe ask their support about it
pretty strange though first i've heard of it for mmc
yea its rly odd ill wipe and try fresh install or ill just move my local files that do work into bisecet
welp there server.jar is broken... (v16 btw v18 is still cooked)
i just used my fabric-server-launcher.jar from my own server and it worked....
does anyone know any extra furniture mods that work with the modpack? im using v27
If you have an item or weapon in your shield hand and scroll with my mouse wheel over to a 2h weapon on my item bar, the off hand item goes poof.
when you try to scroll back to a 1h item the off hand doesnt come back
goodbye nice bow I was trying to heal while fishing
Any suggested way to grind these skill points out?
send a log of it happening on a normal betterx world
whenever i load any sizable amount of chunks the servers tps tanks a lot, any idea on how to fix?https://spark.lucko.me/xOkGcdGqjz
i gave it 10gb of ram idk if giving it more would help in this case (got 64gb total if needed)
also need some input on how i can improve the multithread performance (got a i7-8700 on the server if it helps)
!tps follow the full guide #medieval-mc-fabric message
minecraft is 99.99% single-core. there is no multithreading
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
Does Ranged Damage works for Magic Damage?
bruh
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- ATLauncher
- no
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- pressing play on any world
latest.log | crash-2025-03-03_15.33.29-server.txt | atlauncher.log | crash_assistant_app.log | win_event1741008813822.txt
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
--oh sorry, that was me trying to resume that default world. i don't know where my head was at.
I just did it again with a brand new betterx and it created and loaded it fine so I went to close it (it took forever to save) but when I reopened minecraft and resumed the world it still worked! I'm so happy! I guess maybe the default world type was the problem? Idk, but it seems to work with betterX. Thanks so much!!
Can someone help me by explaining how to unlock more of the main abilities here?
Medieval MC3 -v18 crashed
- 1.21.1 [Fabric]
- FTB App
- No changes to modpack
- MMC3 v18
- The game always crashes
- Combining accessories with the agglomeration item crashes the game immediately after clicking the combined item in the output of the crafting table.
Uploaded crash-2025-03-03_14.06.18-client.txt from @wintry trout to mclogs: https://mclo.gs/77zrywy
Also is there a way to increase the max enchantments allowed on something? Like my sword
bro
might sound stupid
but how do i drink water
new to this
Its because of a vanilla MC mechanic that exponentially increases enchantment cost the more times you've repaired an item or enchanted through an anvil
Can't answer your other questions, i don't play this pack
is there a way to fix that or no
Adding the Fixed Anvil Repair Cost mod
I have no idea if there are mods already in this pack that would help
what mod adds the tiers of loot? the common, uncommon, epic etc?
How to switch to Vanilla bar?
Wait, no, that mod is Tiered
whats the difference in this modpack to the forge variant?
is it about things growing or spreading or in general sense like pistons moving slower ect
Everything
does mobs stuck while moving or are they moving smoothly
When I try to hit the mob it stuck 3s
its about your gpu i think, your movement is not hindered but whenever you interact with something it is delayed right
Ye
ye i don't know how to fix that but you can try downing your graphics, render distance ect
couldn't help this time
hey uhh i was playing mmc 2 last night with friends and the servers just went out for all 3 of us and still not working anybody help?
Yo peeps. which medieval MC version should I try? I see there's a few on curseforge so I'm not sure which to pick
if you have a preference for fabric/forge, or for a specific mod in either modpack, then pick that
otherwise if not just try both tbh
or you could also mention what kind of experience/gameplay you’re looking for, each one provides something different despite having the same name, such as different mobs structures weapons etc etc
Does anybody have any idea how to make these more efficient?
Its blazes that are spawning, but for one they are only level 3 so they provide nearly nothing for xp, and second idk the best way to make the grinder
Where tf do i find a dread lich to get the gravemasters key for the mausoleum???
im convinced they dont spawn
Such has been reported and a PR has been made to attempt to fix the issue: https://github.com/wisp-forest/things/pull/118
Fixes crashing with Apoli and such
why carry on mod doesn't work on villagers only on guards?
Breaks with villagers
that's sad
I have to options for fences, how do I change that?
do i get invisible for this set?
1.19 MMC1 is there any way to change spell damage in config
Need the full set, then just crouch
is some sortof server on this modpack?
there are so many tall door variants. but how do i get those? i can't see anything craftable for them;
HI , have a bug, my level dont overpass 10 in Prominence II Rpg
ever come back to 176 xp to next level
Are there any plans for further development of Fabric MMC2 1.20.1 (currently v27)?
All packs get maintained and updated
Except any that state otherwise
They tend to focus on fan favorites and newer packs though, be patient ^^
It was updated on Nov 28, 2024. Its one of my favorite packs and I would love to see some future updates. Im currently hosting a server from my laptop for me and my friends, and have spent A LOT of hours playing it, I made a few modyfications to the modpack, added some mods, updated to fabric 0.16.10, updated almost all of the mods, except the ones that caused compatibility issues, combined some content from other medieval packs, added some custom quests, textures etc. Im just wondering if the devs of this particular version would be interested in implementing some of the changes I made in future versions. All of the changes were based on UX and feedback from the players, inspiration form other versions of the modpack etc.
I think even other versions would benefit form more quests, Im currently working on some chapters, one of them including "Things" mod that is a big part of overall character progress. My friends that never played the modpack tend to struggle with setting some milestones early and late game, connected with accesories, gear etc.
what should i do first with my ars nouveau source jars first?
anyone exeperincing getsocketopt when your joining a server?
please give more information
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
how do i join a shared world
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
anyone know what would cause this on world creation >.> pack isnt modified, simply downloaded and ran the game
only thing changed was adding a few args to atl from the fps guide, and lowered amt of ram allocated
mmc3 btw
send your latest.log
dont yell at me but i deleted the profile cus it was doing the same thing for every world id attempt to create
Uploaded latest.log from @young hill to mclogs: https://mclo.gs/7ZGkZF6
invalid session id is strange cus the only thing i altered was java args and ram allocation
try removing the sawmill mod and reenter
i shall try
is it of major concern that another log mentioned something about invalid session id ?
invalid session id is cracked client or something
you are on tlauncher so its expected
wdym
thats skill issue
nothing can be done
it will probably get better after the initial lod
load
if doesn't follow the fps guide
its this guy trust
any idea why i installed the shader thing like it said
exactly why i cant stadn using someones mod pack and not making it
has it ever occurred to you that it's a resource pack texture error
what does jade say when you hover over it
whats jade
the mod that tells you the item name when you hover your cursor over an item
does it say from which mod ?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
average curseforge experience i guess 😭😭
im on prism i dont get this issue with my mod packs
welp i have no patience so im just gunna finish mine
just play your own
i plan on doing a server with my custom pack rpg medieval mc i just am saving up cash rn for it
How do we make him grow? We fed him some raw meat and after a while he grew but now he wont eat anything like 10 min lkater
what does the effect fame do?
i have a very strange problem with exp orb drops. often they don't want to drop, even from bottles.
it seems to be somewhat tied to which chunk i am in, but i don't know a pattern yet. does excessive animals block exp orbs dropping?
zacharielesheesh has been timed out for 1h 

Reason: Similar-Messages Spam
zacharielesheesh has been timed out for 1h 

Reason: Similar-Messages Spam
zacharielesheesh has been timed out temporarily for 11m 
Hi yall! I'm running a server with MMC 3 (1.21) Fabric version, and we are having issues locating any trial chambers? I'm assuming they are a bit different with the various mods that change structure generation, but even going in to free cam, I can never find any. Am I missing something? LOL
(Running v 18 of the modpack, https://www.curseforge.com/minecraft/modpacks/medieval-mc-fabric-mmc3/files/5556051)
oh i didnt even think of this 
thank you!
mhm no problem
any one know the mod in medieval mc that adds gems to weapons?
and is it for 1.20.1?
Does anyone know the source of the sculk (just the sculk) texture change in MMC3 (1.21)? I'm trying to figure out if there is a way to revert the sculk to vanilla texture, because all of my players hate the sculk and want to build with it, but I'm having trouble finding the source of it, and I can't see any server configs for it either.
zenith?
hella late response but that should be it
@midnight citrus if you had to pick one MMC now which would it be?
mmc2 still
ahh gotcha
same
im waffling on which modpack to play
i did not like Prominence very much
all the advanced tech stuff is not for me and just wasted time cuz of all the minerals and items associated with it that I would find everywhere
well yea but seeing all the ores associated with them all over the place was a bit annoying
sensory overload when tryna find useful stuff
i get that i suppose, granted i don't hardly ever mine in prom either
im guessing SimplySkills is the mod you are referring to from MMC2?
yes
is there a list of the highest modloader version i can pick? if i pick the latest one for MMC1, it crashes before launching the game
im also still wondering what's up with EXP orbs not dropping when i'm in certain chunks
please dont change modloader version
why do you want to even
that's a feature
chunk-based xp moderation
please read the questbook
i had a weird thing where i would get near random crashes when opening backpack. google suggested it might have been an issue with Fabric. it seems to have resolved itself? not sure. though i did find out windows gave me up to 70GB extra virtual memory...
please
do not
answers
to mod issues
you are not going to find anything useful ever
changing your modloader version is not going to magically fix a modpack issue
less exp cause i'm near spawn area is somewhat understandable, but things like trading, enchanting bottles and furnaces giving zero is weird. can it be tweaked?
you can disable it in the playerex config
What is the latest version of medieval mc?
Hi everyone! I'm trying to play this modpack with some friends on a server I have set up, but every time I try to join the server my game crashes. I would really appreciate any help! Me and a friend have been trying to work this out for a couple hours now so apologies if the solution is really obvious, we're not professionals at this. Thank you!
Edit from one of the friends: We used bisect hosting to make the server and selected Mideval Minecraft 1.20.1 on the website and just bought the server the way it was automatically. We didn't add or remove anything. We realized the version of the modpack we had was 1.21.1 (and there was no available version for 1.20.1 on curseforge), so we changed the server to be 1.21.1 and it was still crashing (It was already crashing before hand, and it's both of us that crash. Not just one of us.)
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
ATLauncher - Have you changed the modpack in any way except mods?
We haven't - v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
It works in single player, but crashes when joining the server - What steps cause the crash?
I launch the modpack through ATLauncher, click multiplayer and try to join the server I set up. The first time I try it says "Network Protocol Error" and then if I try again it crashes. It is a Minecraft Java 1.21.1 server with no addons, Java version 21 Adoptium.*
latest.log | crash-2025-03-12_16.51.15-client.txt | atlauncher.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
hey there is MMC3 Fabric supported on other server hosts or just bisect? - MMC3 Fabric crashes immediately on startup for me and my server mates but MMC5 NeoFroge works perfectly fine
looks like the same issue from above
1.21.1 [FABRIC]
1.What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
CurseForge
2.Have you changed the modpack in any way except mods?
No
v18
Have you ever gotten past the crash condition without crashing, or does the game always crash?
It works in single player, but crashes when joining the server
What steps cause the crash?
I launch the modpack through Curseforge
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-03-12_15.04.25-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
Is there a way to find all the new cat varieties added with the mod pack? I'm trying to summon a specific type, but I can't seem to figure out what it's called.
I mean I would disagree, the things you find on reddit, and github are gold
btw anyone knows what resourcepack is responsible for ender dragon textures in mmc3?
nvm found it
hello! ive recently have been playing MMC4 with some friends, we added essentials on it BUT even before i did a trial run and even my game was stuttering/lagging..i have more then enough ram and lowered the rendered chunks/simlation chunks by half (they are now like 4-5) and my internet connection is fairly strong, other mod packs didnt have this problem
and its still like that. any help would be amzaing!
could you enable debugPrintMessages in the connectivity config and then sending the new crash reports
!server try following the tutorial fully
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
no not for 1.20 really lol
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
never use Essential
do you have any other suggestion? i dont exactly have the money for a server :(
mb im stupid and didnt read lmao
im not sure how to enabel that this is all new to me
#medieval-mc-fabric looks like MIMI is now offline as i am responding 4 hours later anyone else able to assist
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-03-12_15.04.25-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
1.21.1 [FABRIC]
1.What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
CurseForge
2.Have you changed the modpack in any way except mods?
No
v18
Have you ever gotten past the crash condition without crashing, or does the game always crash?
It works in single player, but crashes when joining the server
What steps cause the crash?
I launch the modpack through Curseforge
@pulsar falcon maybe? sorry if this rude to mention you directly
you didnt answer the questions in your message
hey, im suffering from consistent lag spikes whenever i play mmc3 (v18, 1.21.1, fabric, launched from forge)
around every ten seconds or so, my fps drops to 1 for a couple seconds before stabilizing at ~40 fps
i currently have 8GB ram allocated (my friend who has 6GB allocated comfortably runs the modpack at ~200 fps)
i also have gone to video settings and turned everything to minimal to try and increase performace but nothing works
any tips to decrease lag?
!fps
i have read through and am currently following all the ones i can
altho lag still hits me like a freight train every couple seconds :(
what launcher are you using
curseforge
im also currently using a mac mini m4 if that helps
!alternates use the jar version on right side of screen
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
mac and curse are hateful
- 1.21.1 [FABRIC]
- CurseForge
- no
- v18
- no
- once i click join server
MMC3 Fabric crashes immediately on startup for me and my server mates but MMC5 NeoFroge works perfectly fine
you need to send logs
Here are the logs
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
still crashing on launch
[13/03/2025 09:22:48 AM] [Netty Client IO #1/INFO] Disconnected from server, resetting proxy config values
[13/03/2025 09:22:48 AM] [Netty Client IO #1/ERROR] The Waystone storage is null. This is likely caused by a crash.
[13/03/2025 09:22:47 AM] [Render thread/ERROR] Failed to handle packet ClientboundLoginPacke
1.21.1 [FABRIC]
ATLauncher
no
v18
no
once i click join server
Uploaded message.txt from @solar imp to mclogs: https://mclo.gs/aMuYA3W
Medieval MC 3 - v16 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- Curseforge
- No
- v16
- it always crash
- creating a new world
latest.log
crash-2025-03-13_12.19.53-server.txt
CurseForge: skip launcher
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Does the performance guide apply to servers too? I allocated 8GB RAM to the server and i have a 4.7GHz CPU, but still have some troubles with keeping up with travel. Thinking of maybe turning of virtual RAM on my server to force it to use the physical memory
but i wonder if there are some CPU optimizations i can do?
And would GraalVM also help me on the side of my server or is that only useful for client optimization?
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
yes it helps on either side
thanks!
why the mini RPG bosses don't have any drops?
The Forsaken ones
it's difficult to defeat one and harder when they spawn in groups
plus they spawn everywhere
Hello all I have a question about a protocol error I keep getting when I try to login to my server
hey, thanks for helping me from before
i downloaded ATL and am now using that, but the lag hasn't changed
is there any other way to optimize my performace?
!fps
ive already done everything listed in the guide (from the first time you sent that to me)
is there anything else that i can do?
!macjdk make sure you are using the right java version
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
Don't the Forsaken ones, the mini bosses don't have any drops?
I went on curseforge and looked at the mod and they are supposed to drop something
Hello I have been playing Medieval MC Fabric through the CurseForge loader. Is there a way to leave full screen mode? I have tried everything, esc, F11, etc. It seems stuck in full screen and while in full screen my mouse cursor is missing. I am not running any video capture program and tried with Discord completely closed.
I would give this 100% five star review if it were not for the mouse cursor issue.
thanks for a great game.
Yo, it still happening? What it sayong exactly?
Yes, I have been unable to leave full screen mode. It has never been a problem with other curse forge games, yet.
There are no error messages.
otherwise the game plays great
I was actually repkying to other bro :p.
Videosettings dont give answer either?
Setting in the curseforge launcher itself?
correct
?
wait sorry, there is a setting in curse forge for fullscreen?
I dunno. There might be
Its a complicated launcher
That or in the minecraft launcher it summons
I was able to find it in the curseforge ui, it is disabled.
that's in your video settings yeah
Hey everyone just started this mod have to say sofar its amazing and we love it on our server, just wondering is there a guide on how to smelt the new ores?
check rei
Ok thankie
I was playing and entered the Nether once but when I tried to go back in I got the "The game crashed: ticking player" and now everything I try to load the world it crashes with the same issue and any other worlds I make and enter the Nether in......any recommendations or fixes?
!moreinfo Oh boy. You have searched for the same problem in this channel, yeah?
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Hey there, got the same question as you, did you find an answer yet by chance? :o
all youd have to do is find the base texture and apply it to a texture pack
for instance :
\example\assets\minecraft\textures\block
find the base texture of sculk from minecraft jar, insert the png into block folder and apply it over the texture pack that alters blocks
which to my knowledge is excalibur
Thank you! :>
Can anyone direct me to where I can change the forsaken mini bosses spawn rates? I've looked all over the configs but they are spawning way too much. XD
Anyone else have issues running Medieval MC MMC3? Every couple of seconds it stutters for me and it has lag spikes when loading chunks. Ive tried installing chunk performance mods and allocating 8 GB ram but nothing has helped
!fps
I followed this and it still didnt help
launcher?
curseforge
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
i saw the alternative its just id rather not have to switch to a different launcher but ill still give it a try
didnt know that
so yeah turns out it runs way worse on atlauncher😭
!fps follow rest of the guide there
i installed the custom install script and mods and still it wont run smoothly when generating chunks...
weirdly i dont get this issue in any other modpacks
maybe my pc just hates medieval stuff lmao
how much ram does pc have, how much did you allocate?
i allocated 5930 gb and my pc has 16 gb
do 8gb (8000mb)
also tried that, didnt help either
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
so all that i should do is run that command in game?
yes, let it run 15ish minutes and do /spark profiler stop, post results here
where did you change your ram allocation?
wdym?
where did you change the ram amount for your game to use
the first part of the fps guide?
i did it here @sonic swift
Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- FTB App
- No I have not changed the modpack
- v18
- No, the game consistently force disconnects the user & no one else on the server, then during the 2nd attempt at recreating the conditions of the crash, it fully crashes the game & gives a log report.
- Create an echoing tome ~ Bind the passive "Echoes" to the tome ~ Utilize the primary ability "Echofall" on a player entity ~ Wait for the ticks of "Echoes" to force the game to disconnect you, at which point it boots the user back to the main menu screen & displays the message "NMeruina caught a ticking execption on your client, see your logs for more info." ~ Load back into the server & use the primary ability "Echofall" again on a player entity ~ Game will crash completely & give the crash logs I have attached to this message.
latest.log | crash-2025-03-17_18.01.03-client.txt | ftb-app-electron.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
...yeah, uhh-
That sounds a lot like a mod moment, but not sure
update the Affinity mod
if the issue persists report it to the mod developer
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
ah this is not an ftb app derp?
Can anyone help me with this?
send a screneshot with f3 open ingame
this might be a stupid question BUT is there any way to reduce ping on the lan world u share I mean it hosts it as a server and for LAN ip and port doesnt connect you to the person u wanna play with is there any way PLS TO REDUCE THE PING bcuz Mine and my brother's reach up to 527 and its unplayable
sorry if the question is dumb asf
(could be slow internet idk)
so one of my players lost his zar ptak somehow. decided to find a new one. he gets it to base and has someone rename it.
i use my summoning staff, and suddenly i get my bird, ownership to me, renamed to that name.
the place where my friend's bird was parked has no bird
and it's also not the same color as my friend found a bird of
i have no idea what just happened.
Aight will do once i get home
Does anyone know what the difference between MMC1, 2 and 3 are? We're trying to figure out which one is best for a multiplayer server
mmc just means medieval minecraft, lunapixel usually makes different versions of modpacks and so for example if you wanted to play the newest and most updated one youd choose mmc3 cause its the third one
does that make sense?😭
Minecraft version difference which is listed on the page of each of the packs what they are using.
!best
There is no best, it's based on preference. What's best is to try it out yourself as what you like may be something someone else dislikes.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
turn off vsync
please be patient
i still have the same issue when turning it off and it also causes huge screen tears so yea
sorry 😭
enable vsync on your gpu software or monitor settings
minecraft vsync destroys performance
and please remove any mods you added
if you havent already
how? apparently my monitor has amd freesync but i dont really know if it works or not
the only mods i added are from the fps guide
should work fine
how can i tell?
see if you have screen tearing lol
do you have freesync enabled
i dunno?
well its not gonna do anything if you have freesync off
well like i said im not sure if its on or not
im not very tech savy when it comes to monitors lmao
oop
yep its enabled, just checked
was able to find the option in the amd software
thing is i dont think freesync helps with the ingame lag
the problem im having is that when loading chunks i get massive frame drops and lag every few seconds
disabling vsync ingame helps
that was my point
are you playing on a server
nope
yea im gonna see if i can add minecraft to my amd software so that it works with freesync
i cant figure out how i can add the game to my list in the software-
Omg while trying to add the game my pc completely crashed and blue screened 😭
guys i need like a guide on how to use the revenant class
is there any accessories that prevent fall damage in mmc3
I can't seem to find one
or grant fire resistance
never mind found em!
Hello is this the place to ask questions about the MMC3 mod?
Ok thank you, got a quick question , resolution might take awhile though. I was playing last night and decided to start brewing beer and when I made a keg and right clicked on it the game crashed to load screen and something about a sockopt error came up. Any ideas on how to fix this?
does it not let you rejoin afterwards
and you were on a server i assume
I have to restart the server and as long as I don't right click on that Keg I am fine so is everyone else.
send a log from one of the times you right clicked the keg and had to restart
from the servers logs folder
Ok let me check that for ya
be back in a min
ITs not showing up in the log so I am going to have to dup it later , thank you for your time.
Please read the full contents of the #get-support channel for us to provide assistance.
still having the same issue with the modpack
the modpack is so laggy i keep rubberbanding and after like 15 minutes of playing i want do anything chunks wont load and i cant eat or break blocks
That's a you problem
!fps
its not my frames its a ping problem even on singleplayer when this doesnt happen on any other modpack like even essetials is less laggy
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
Also, Essential is not better by any metric.
its literally less laggy than how my game was running on mmc idk what mod is causing my packet loss
i have before
The configurations probably got reset on update.
Please read the full contents of the #get-support channel for us to provide assistance.
I read through the contents of the channel
Should I answer the support questions?
yes
- What Minecraft version are you using? -1.21
- What launcher did you run Minecraft with? -ATLauncher
- Have you changed the modpack in any way? -No
- What version of the modpack are you using? -v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash? -The game doesnt crash
- What steps cause the crash? -Again, the game doesnt crash for me
Nvm, launching the modpack causes my pc to bluescreen
Do i reinstall it?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
So... Do i completely reinstall atlauncher?
i guess, i dont really know what your issue is
you can also try prism if ATL isnt working for you
It does, thank you
I dont either lmao 😭
Will do
Is there any public server here?
Hello! I'm trying to change the flight limitations of pixie via datapack. It works in single player, but not on a server. Anyone here knowledgeable about this with some time on their hands to help me?
where did you place the datapack that was made
iirc you need to place it in world > datapacks and then run the /datapack enable command
again im having the same issue with immense lag during chunk loading
Hey, thanks for answering! I placed it where you said, ran the enable command, and reloaded. It works for a few seconds after using the /reload command, but then it reverts back to default
and you input the path for the datapack correctly right
after/datapack enable you need to also input the path iirc
Mhm! It is definitely enabled
what version if mmc is it maybe using a resource loader to load in the datapack might help
i cant really think of a reason why it would not work on multi but work on single otherwise sadly
its mmc2 v27
doesn't have one as far as i can see
i also dont know why it wouldn't work if its loaded sorry
I want to add a few mods and tweak a few configs for use on a private server with less than 8 friends
Am I able to just zip it up and upload it or curseforge unlisted or something?
Doing it manually / individually for each player sounds like a recipe for frustration and mistakes
not allowed to afaik
you could make a zip with only the changed files and make the players extract them manually but uploading it to curseforge wouldn't be allowed
Looks like I gotta deal :/
But thanks a lot for your effort!
when you export in curseforge launcher there should be an option to generate a temporary link
try putting it into /config/paxi/datapacks instead
I tried that, it didn't help :<
Jesus I might have to install curseforge just for that
woodroach is a real one
Anyone got some food tips for carnivore races? Farmer's Delight foods are really limited with the whole halved nutrition thing for any food items that include non-meats
So um, is there an exact date when it'll come out as it's own mod? I'm asking because it's been kinda like around a month - not pinging
and yeah I've been following the curseforge profile
read #faq on how to install using atlauncher
Is there any serverpack for medieval mc?
!server yea the selfhosting guide should guide you
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
does fabric and neo forge have the same content
no
but you can compare rhe modlists of the two and see which one you like more
!compare
Discover the perfect Minecraft modpack for you. Search for modpacks by included mods, categories, Minecraft version and more!
hey im playing mmc3 fabric is it just me or does the feeding upgrade just not give hunger
Is there a skill tree for classes or just health, dmg etc
mmc2 has a skill tree
when is more story being added again?
helps to share what problems you're talking about
how do i kill pixie bow spam 😭
Hi so, it won't let me share the crash report but one of my players was kicked for eating the bucket of hot wings?
It said " caught ticking player"
Not sure if it's an issue but thought it should be mentioned
Please read the full contents of the #get-support channel for us to provide assistance.
1. What Minecraft version are you using? 1.21.4
2. What launcher did you run Minecraft with? CURSEFORGE
3. Have you changed the modpack in any way? I have not
4. What version of the modpack are you using? V18
5. Have you ever gotten past the crash condition without crashing, or does the game always crash? Player is usually just kicked
6. What steps cause the crash? Player ate the bucket of hot wings and game counted it as "caught ticking player"
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one. Answer: there was no report or log .
the latest.log is always generated
bow spam?
What is "this position is on cooldown wait x seconds" info when placing blocks and how to disable it (MMC1)
anyone wanna play?
Medieval MC 5 - v14 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
R = CurseForge - Have you changed the modpack in any way except mods?
R = No - v14
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
R = Always crash. - What steps cause the crash?
R = I just downloaded, installed and started modpack.
latest.log | debug.log | hs_err_pid4632.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
download an adoptium version of java and use atlauncher
What do you mean with an Java Adoptium Version?
as in download java from https://adoptium.net
and tell atlauncher to use it
Okay, thank you so much 
Medieval MC 5 - v14 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
R = ATLauncher - Have you changed the modpack in any way except mods?
R = No. - v14
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
R = Always crash. - What steps cause the crash?
R = The same, modpack downloaded, installed and started.
latest.log | debug.log | hs_err_pid2560.log | atlauncher.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
send a screenshot of the java tab in ATL
You mean this?
Wait, I tried to open now and my modpack worked, this time opened normally
It was not working 10 seconds ago ;-;
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
read this ^
the java section
do that
Okay, i'll do this
the error log says I need conquests medieval arms compatible with 1.21.1 but that doesn't seem to even exist
does it?
what?
there is no version of conquests medieval arms for minecraft 1.21.1
can you send the log file
sorry I gave up and just disabled the mod
Does anyone know if there's a way to get more FP with medieval origins?
hi!! I'm trying to play on a server with my roomies and we all keep having different issues. I've been able to open the game but it keeps crashing when I go to select a race. Here's what I've copied from the crash assistant: Medieval MC 3 - v18 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v18
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | hs_err_pid13884.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
how much ram do you have allocated to curseforge
i never set a specific amount, let me look into how I would do that
it looks like i had just under 5000 mb allocated, i bumped it up to 5184 mb and we'll see if that helps, thank you!!
Yeah like they just fly around and shoot
like either I take no damage or alot of damage and die real fast
anyone know how to get out of a boat? Iv tried the normal keys (sneak/sprint/ect) but iv been trapped in a boat for the last 20 mins. Cant attack the boat to break it or anything.
never mind
turns out every time i get in a boat my game crashes quietly
Is there any way to adjust the spawn rate of the dragons in overworld?
Are the Lootr / worldgen chest loot tables configured by the modpack devs or is Lootr pretty much drag-and-drop?
Basically I want to add Lootr to MMC2 before I pregenerate chunks
But I have a feeling that’s too simple
add it after pregenning
afaik pregen moda and lootr are incompatible
well
that's the thing
there is no simple way to replace all of the chests in pregenerated chunks with lootr chests
i had pregenerated a Prominence II world about a year ago and don't recall issues?
you can only run a repeating command block to replace chests near players with lootr chests but the issue there is it turns regular storage chests into lootr chests
lmfao
Yea it still crashes
I see the damage stack trace thing for both conjuring and mythic upgrades
I updated Spellblades and Such and any dependencies and all shared dependents of those dependencies assuming it would fix it but nope
hey loving the Alfiq origin so much. but randomly I stopped being able to climb. I thought it was due to a sandstorm that rolled in but the issue persists
any ideas what's up
all my other cat abilities are working, flip, super jump, and no fall damage
it was toggled off. SMH
why does my game crash when I share the world and stop it from public sharing bcuz I js want lan to work,
the game gets stuck for few seconds n proceeds to crash.
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Yeah sorry, it's been about 80% done since exactly a month ago lol, but I've just had a lot going on
will get back to it soon
hi there , i dont know if this is the place to ask for help? so if its not im sorry.
im playing mmc3 1.21.1 on curseforge, got everything running nicely.
but, my HUD is all over the place, anyone who can tell me how to move the HUD/DELETE it/delete the mod of the HUD?
did you add the Raised mod?
nope , i added in some performance mods and controller mod
one of your mods is shifting the hotbar upward, and the custom HUD is incompatible with that
ah okay, is there any way to delete the custom hud?
not at the moment, I'll have an update today for it
i think my performance mods are indium , c2me and noisium.
i also think i have terralith installed
okay , tyvm 🙂
also had distant horizons at one point but i have since deleted it
indium shouldn't be needed
but that's odd, none of those mods should be shifting the hud
maybe the controller mod?
you really should not add c2me lol that is probably going to crash you
very likely yea
ill try out an lyk
it's already in the pack
ohhh
but it's a pretty minor improvement
oh okay , didnt know that. thought it would be good to add it performancewise
i've been checking c2me frequently to see if it's usable, they seem to be making a lot of compatibility improvements
but yeah still very unstable, that's why it's not in
so i have checked it out, and it is indeed the controller mod thats causing the HUD to shift. modname is controllable
thank you for the fast and good help ! 🙂
So after some investigation in my game being somewhat unstable (crashing from memory despite having megatons of it) i saw in the optimization guide that the graalvm doesn't work for curseforge. Yet i can find where to choose java binaries per java version in the curseforge launcher. is the article just slightly out of date or are there other reasons to why Graal doesn't work with Curseforge?
i installed graal on both my server and gaming pc but on the gaming pc i forgot to actually set curseforge to use it. thought it would just use environment variables
as far as I know this is just because the curseforge launcher didn't used to let you select a JVM distribution, yeah
@pulsar falcon could say for sure
it doesn't use the JAVA_HOME environment variable (neither does ATLauncher or most other launchers) just to simplify the install for people, since most users have java 8 installed or nothing at all
yeah
it has very limited support for changing stuff like that
and i also dont trust it to even work on CF launcher lol
Oh boy, Ice and Fire. I have some beef with that mod lmao, I love getting 1 shot by a dragon outside my render distance deciding that I don't get to live today
Can i ask a question, and this might come off as insensitive or mean and im not meaning it to. But is Fabric Medieval more fleshed out than Forge?
no, they are both equally fleshed out
they just have different mods and different content
Good good, I wanted to test it out and didnt want to get overwhelmed lol
TO be frank I have no idea what the difference between Forge, Fabric, Neoforge and quilt even really is beyond it being a methodology for loading mods.
different loaders basically, that also means different mods
!define
Curseforge - Refers to both the Curseforge website and Curseforge Launcher. The Curseforge Launcher is a modded launcher used to play & install modpacks. ATLauncher is a better alternative. All modded launchers can be used to install & play both Fabric and Forge modpacks.
Modpack - A collection of mods. "Better MC 1.19.2 Forge", for example, is a modpack.
Modpack Version - The version of the modpack you are playing. v5, v6, v7, etc.
Minecraft Version - The version of Minecraft which the modpack you are playing runs on. 1.16.5, 1.18.2, 1.19.2, etc.
Mod - A .jar file which modifies the game in some way. "BetterEnd", for example, is a mod.
Forge - A mod loader which allows you to use Forge mods.
Fabric - A mod loader which allows you to use Fabric mods.
Im a techie so im wondering why they operate different but this is probably far outside this scope lol
its just different modding apis
See that word makes it click lol, makes sense okay loading game timeee
What was the method of doing that again? I didn't see a Thermoo config.
I forgot to add it lol, but you can change the scorchful/frostiful configs
how do i install the server pack on a modrinth server, cant figure out the pack
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
if i am already hosting a server, using modrinth, can i put the modpack on that server?
please follow the server guide
Were you still planning to make this patch?
Fully updated Spellblades and Such and all dependents and shared dependencies, still crashes
yes, whenever MMC2 fabric gets updated next
Can anyone please help, i am trying to equip my backpack but the button is missing from the menu, i am running MMC3
You might just have a backpack slot you can drop it into like armor
Which mod in MMC2 Fabric adds Scavenger and Knowledge of the Ages etc?
Scavenger is bugged and prevents loot drops a lot
I wanna see if the mod that adds it has an update available
Zenith
It'll reroll drops
Yea but from my understanding this just means it should be possible to get loot rolls as if you killed 2x enemies?
With scavenger the wither doesn’t drop Nether Star etc
Knowledge of ages turns loot into xp
Yea ik
That's why you don't get drops
It doesn’t have that just scavenger
I just mentioned Knowledge OTA cuz I figured it’s the same mod
Star can get rerolled to something else
On the MMC3 CurseForge description page, the Discord button redirects to the Bisect partnership page instead of the invite link.
Looks like both images got shoved into the same <a> tag.
How can high elf lava walk? I have obsidian in hand and still get hurt
Ability button in keybinds
awesome i'll try it thanks!
killed the wither and it didnt drop the nether star
is that normal or
nvm
it dropped it
idk how i didnt see it!
Is this the right setting? when I press ` I just get a message about vein mining
Keybind conflicts
OK I am holding obsidian, I press insert and I don't see anything
Pressing O confirms I am high elf
though when I mouseover the bind it says backpack which I am not sure why
Changed the show powers in usability hints bind as well
Off-hand
There has to be something stupid I'm missing
It must be bugged on 1.21, can you report it to the Medieval Origins Revival github
dang good to know. I'll do that
This didn’t fix it just FYI
I’m assuming they are right tho and it is an issue with Ice and Fire CE because I got almost the exact same entity error from Mobs of Mythology when it tried to spawn a Kobold as well
I don’t understand the version structure of MMC either
But MMC2 Fabric has great difficulty balancing imo, endgame feels rewarding and still challenging with my server on hard mode
MC Dungeons Weapons are still in showing up in loot chests (I pregenerated my world with MCDW completely removed to be sure this wouldn’t happen) so I’m assuming there is something else in this modpack configuring them to be included in loot tables?
!fps