#better-mc-forge
1 messages · Page 445 of 1
Updating now, I'll message back in a little bit on if that fixes my wife's issue or not
are there any good guides for this modpack
how am i supposed to find mods for farming and such
can anything be done to make the snow melt faster in spring/summer. i dont mind the seasons but i have lingering snow all the way through summer and its annoying
I know you were answering someone else, but I notice they have 8gb allocated. I'm curious why you recommend to lower it to 6gb - does it raise performance if you allocate a lower amount with a 16gb rig?
your best guide is the questbook in game
It can yeah, 8 gigs would be half of their ram, the guide used to say between 8-10 gigs for 16 and up but we were having a lot of issues with players with 16 using 9 and 10 gigs so I suggested to Chloe to have the cut off at 8.
too much ram can be even worse than not enough sometimes
garbage collection goes to crap
Oh interesting
I have 16gb and have been using 7500mb, ill have to try 6000mb just to experiment
Java is hateful with too much ram, but also computers can be hateful if half their ram is pushed to 1 thing that isn't relatively hard on the pc
how to respawn end dragon?
does lootr work with this
yeah
would it work with a pre existing world
it probably works on newly generated chunks but i do not know about already existing ones
best bet is to make a backup of the world and try it
I'm having issues with JEI once I updated from v43 to v44
The little wrench wont turn red when I right click for items
I have cheats enabled within the JEI and LAN config menu
Quick question for the forgery mod - does client mean it's only changing things on my end? or for everyone in the server?
guys can i do hosting for dawncraft?
not our pack, most likely could host it but that's a question for their team
ohh ok sorry
Is it y>170 or y>200 for an aether dragon egg to hatch? finding mixed info
explore structures
dont thin kit matters
is there a promonance channel?
it can hatch anywhere
yes the questbook explains how dragons work
thought the eggs required specifics eg leaves, darkness etc
maybe they dumbed it down
it causes game crashes
i have most all eggs and they spawned at the same plce in the overworld
uhh ok ?
hardly..
succesfully hatched a ghost and a forest dragon using darkness below y64 and leaves respectively but no way for me to know if those criteria mattered ig
it didn't.
for sure?
for sure
that makes things easier, kind of a shame though
i liked the flavour of the requirements
yeah
can you still convert one egg type into another? i have 3 more aethers but would prefer the ones i dont have
if you can let me know how you did it 🙂
the only conversion i had was a mistake. it turned my fire dragon into ice because it snowed
ill test it anyway, maybe just put one on a load of magma blocks or whatever
ah cool
please stop removing and updating mods. there is absolutely no reason to remove any of this
update to v43
contrary to what chloe said, the questbook doesn't tell you hardly anything about dragons, probably best to find the wiki for the mod
yeah it doesnt and info online is mixed or outdated
just dont press the arrow, you can use your scroll wheel to scroll
this is no longer needed as of v44
do i want to update this?
update to v44
No
ty
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
correct
update to v44 please
remove the doubledoor mod or config the Charm mod
please stop removing and updating mods, and update the modpack to the latest version
do not remove mods
remove efallingtrees
remove immersive aircraft
do not use minecraft launcher
retry without the mods you added
update to v44
!ca
please do not downgrade the modloader version
Please read the full contents of the #get-support channel for us to provide assistance.
why
!ws and make sure you're on the latest modpack version
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
read the questbook ingame
have you read the questbook ingame?
considering chloe develops the pack yes
maybe they should revisit it. because this is the second time in 10 minutes saying "read the questbook" to a question that isnt answered in the questbook
you removed so many mods for no reason dude
your instance is completely broken
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
wtf how?? i only added mods
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
use prism for steam deck
Alright got the modpack updated and everything on both our ends - my wife is still having the error with FTB. I'll repost the screenshots just so it's easy to see (also reminding that I tried alternate launchers and hosting my own server last night)
update to v44
read the questbook ingame
@viral garden you keep saying this in regard to queries about the dragons but the ingame quest doesnt cover any of the hatching criteria nor transformation of egg types from what i can see
the same way as vanilla, place an end crystal on each piece of obsidian
that was disabled in controls. you are free to enable it again
if you are playing on a server and changing things via the ingame menu, it wont save to everyone else
*bedrock
you would need to edit the config file if you're on a server
!prommove
Elocin projects have moved!
Nicole/Elocin, the dev of Prominence 1/2 modpacks, YSNS mod, and much more has gone independent to her own studio for her projects. She is no longer affiliated with Luna Pixel Studios in any way.
You can find the invite link inside the CurseForge Prominence project page.
in fact with regard to the dragons, the hatching criteria dont even apply
you just place the dragon egg and it hatches dude lmfao
yes update to v44
this is evidence that yoou didn't even read Pylo's question
i literally fucking wrote it dude 😭
not what was asked
lol yeah. smh
you just place a dragon egg and it hatches
it doesnt explain transformation of the eggs at all
after clicking it
lol
yes
that feature is poorly implemented
i asked about transforming one type of egg into another
..which arent mentioned in the q log
i removed that from the questbook
so check the q book for something that isnt there? xD
its better to just explore and find new dragons
perhaps note that the original mechanics/requirements for hatching are not necessary so people aren't confused
tbf, i had no idea, but apparently some people do
as do countless threads etc, most mods have crap documentation
you removed like 50 mods lol just do a fresh install
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
ty!!
there is not hatching criteria
yeah i was thinking abt that aswell
but how do i deleted 50 mods lol
hmm anyways
thank yall for the help :D
i will for sure
Bruh
I'm not trying to be a dick but I mentioned 2 times that I did try both of those guides last night and followed them thoroughly
but regardless
I did actually fix the issue just now
it wouldnt happen if you followed both guides fully
well, it still was
but anyway here was my fix: using the direct connection feature rather than "add server"
super simple and I wish I tried it earlier
but yeah - I'm being honest, I did try those guides and they didn't help prior to my own solution. I get that you guys get a lot of little kids in this server but it's pretty unfair to treat everyone in here like an idiot
its how much you have allocated. in your launcher settings you can change it.
8 gigs is fine then. idk what else could could be causing your issue
They know
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
They did, it's still not loading chunks
seriously how can i play with friend with this mod
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
change ram in curseforge clicking profile options
They know how to change the ram. Chill
I suggested the 6 gigs as they assumed there was only 16 gigs in the computer
Uploaded latest.log from @winged glacier to mclogs: https://mclo.gs/zGu5pp0
are the chunks laggy or you go in and you're completely frozen
Hi all. Traveler's Backpack mod is missing in the server pack. (v34)
travelers backpack is not and never was in better mc
!pregen
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬...
same as normal
Oh... ok. Lol. I know I have it for my personal world. I didn't know the server would require it too.
is there any way to play the game in spanish text?
main menu -> language -> spanish
how do you get enchanted gravitite?
one question, how do i friend
theres no classes its a vanilla+ modpack
check the aether wiki
what
can you recommend one that has it and maybe in spanish? or can i add a mod to the pack?
ok how i server host lol
Better MC 4 - v43 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v43
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log | i7-13700kf can be reason of crash
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
it says i need arkinium plate but when i searcj it up it doesnt show anuthing
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
update to v44
hello
i have a question about pre-generation if someone has the time
i am curious to know if it is possible to temporarily make use of a mod like Chunky to pregenerate much of BMC4's terrain
i am hoping to increase stability and reliability of my public server
thanks
oh wait
you can yes
yes there is
even in this very channel lol
that looks shockingly easy lol
i dunno why i thought there would be more to it lol
i can't seem to find chunk-pregenerator for 1.20.1
try chunky
its additional versions
thank you!
How do I update my better minecraft server?
Anyone wanna play better mc?
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
sorry
guys would yall consider better mc hard to run or? My laptop isnt the highest spec and im wondering if yall know how to optimize it or anything
no its not hard to run at all, the modpacks fully optimized as well
for furhter performance improvements you can follow our guide
!fps
ah alr tks
it doesnt give many problems but js sometimes when it has to render more than normal it lags a bit, I got the same issue with vanilla mc I think but was js wondering if its harder to run better mc
bmc can run on very low end pcs but pretty much any modpack would be tougher to run then just basic vanilla just logically
I've tried disabled it but it just ends up crashing my game, any insight on this ?
Did they take ignitium out of the latest bmc5 neoforge update ?
check the changelog
Doesn’t say anything about removing anything
Says I completed dependencies
Un
For cataclysm
Mod
anyone know why my "resource packs" button is missing from the options menu?
i need help
better mc v44 eye of the void is not working
cataclysm mod
i cant find to kill that boss
update the modpack
send a screenshot
@viral garden
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
...
rip its def cause i added ode mods
does essentials work with this modpack
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
thank you
My game keeps crashing and I keep getting this error
what is the best way to reduce server lag drastically on the free hosting?
stop tagging staff and wait patiently
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
why in yt vids people can make an explorers compass but i cant
Better MC 5 - v30 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v30
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | debug.log | crash-2025-06-29_23.04.10-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Found [2;34m1[0m log analysis results:
[2;34mCodexMessage[0m in: crash-2025-06-29_23.04.10-client.txt
Mod list changes beyond the modpack:
[2;32m78[0m added, [2;31m5[0m removed, [2;34m1[0m updated.
Hey guys. I have a modified version of BMC 5 running on a neoforge server. Everything was working great until we updated some mods and now I am getting a Neruina ticking exception. All my friends can join but I can't. I am the one hosting too. We did remove a mod called Bogos Binted but that didn't affect any of their logging on. Any help would be appreciated
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
Oh word. Thanks
hmmm so where the heck is the world border does anyone know?
What are these?
dude 30M blocks! that's 30 times using this carver thing
be more specific
Does anyone know how to make chunks load a bit quicker. I'm flying my dragon but its too fast and chunks cant keep up
that mod was removed
update the modpack
and do not update mods individually
same as vanilla
its a thing you mine for gold
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
Anyone able to advise why this doesn't seem to be working? Network is set up etc
hello i need help with better mc neoforge, when putting the mob grifeing gamerule on false it does not do anything, creepers can still explode things
Better MC 4 - v43 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) CurseForge
- Have you changed the modpack in any way except mods? Yes, added around 30 or so
- v43
- Have you ever gotten past the crash condition without crashing, or does the game always crash? starts to allocated RAM at the loading screen then crashed.
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m29[0m added, [2;31m1[0m removed, [2;34m0[0m updated.
Hello, i my game keeps crashing when loading, it gives me this report. Does anyone know why this is happening? Is it the mods i have installed myself?
aitforger-1.0.1+1.2.7.jar
try removing this mod
if it doesnt work reinstall the whole pack and add mods one by one
its too time consuming to debug 29 mods one by one so just add them in small batches
Worked, thank you.
Hello, I have a BMC4 v43 server on Enderchest, I have a problem, when a player enters the server ping jumps to 2000+, do you have any ideas what could be causing this?
When she is trying join to the server this is what all she see nothing more
Anyone had any problems with the Network Collector Remote charm within BMC4? Have it equipped but items are not being looted directly to the network, they're going into my inventory still
Is there a way to find the structures and bosses now
Or is it all luck
Don't you have the block descriptor in the top left
hey i have the infernal forge hammer and im vein mining with it what is the config settings to mine in a 3 by 3
check the mod wiki
what modpack and modpack version
update to v44
why did you attach this file
this is a random config file what does this have to do with your issue 😭
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
and join the server directly via direct connect
check the SSN wiki
the same way as intended in vanilla
you explore
helloo, anyone knows how to upload the modpack in a host ?
because i can't find the .jar of the server
helloo was wondering if my mac would be able to handle the modpack
under additional files on the cf site
m2 air? thanks, asking since so many others are too heavy 
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Run the
!alternatescommand in #bots and follow the directions. If you already have ATL installed, move on to step 3. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
you can do it on prism as well
thank you
does it boost performance or?
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
you dont need a .jar
yeah okay i just didnt know if there was still a way to find stuff easier
its not w perfomance its just java 17 can crash your game and you can't change it on certain launchers, but atl/prism are the smoothest launchers out there as well
yeah but to launch it
what host is that
elixir node
you're getting scammed if there is no automatic modpack installer
there is, but there is not the latest version of the modpack
contact their support
okay, thank you !
ok so i just tried it out, it weirdly keeps jumping from 180-200 fps to sudden 5-10s.
not sur ewhat the reason is
!fps
Is there an in built way to pregenerate chunks in the modpack, I haven't done it before - if not how would be best to accomplish it without running into conflicts or problems
!pregen
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬...
Will check that out cheers
Any other suggestions for maximising performance? We are 2 players on an 8gb server but seem to be using 7gb
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
I can do that safely without endangering my existing world?
Why when I use distant horizons on BM4 everything goes laggy even if I play without Internet
distant horizons is a buggy mod so
Tyvm
So there is no solution? 🥀
your solution is not to use the mod if its lagging your game so much as its known for causing such issues
🥀🥀
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
Better MC 4 - v43 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v43
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | debug.log | crash-2025-06-30_18.26.09-client.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m0[0m added, [2;31m41[0m removed, [2;34m1[0m updated.
a. you need a modded launcher b. you somehow tried installing the server pack
!alternates you did not install correctly
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Hello, my BetterMC modpack crashed when I tried to enter the Aether. I added Distant Horizons if that helps. I'm also using Version 43 instead of version 47.
you need to update to the latest version of the modpack
Isn't version 44 the current one
Reason: tlauncher
Moderator: @sweet spade


lipersvoke [1002212941791236146]
ALWAYS these people
Hi! I used to play Better Minecraft on v43 with some mods I installed on the side in a world I had created. I updated the modpack to v44 and loaded the game. Just before I logged in I got a crash that I could close and enter my worlds tab. When I got ready to enter the v43 world it started to load and froze, it's probably from the mods I added, any other ideas? I share the crash that I got:
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
i cant create a server while using server files what should i do
Thanks for your quick response, I will try to remove the mods.
mhm
what exactly issue are you facing trying to set up the server, how did you download the server pack
i download it from curseforge and no matter what i do i cant start error: unable to find java file
i tried to install java from files but it's closes instantly
run the start.bat and send a screenshot
Hi
Is it an issue using Terralith within the modpack?
The thing i'm kinda afriad of are the added structure if they can "find" a space in the world generated world by terralith and how much the exploration will be affected by that
I made a word with terralith to try out and it was a bit difficult going aorund, but i don't know if it's related to the biomes or Terralith itself
Any feedback by people who tried are well appreciated, thank ou!
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
should be fine if it doesnt crash
i tried what they say in the page it's still not working
@viral garden
you need to install java
as the guide says
how can i add shader to last version
shader support is fully included
i cant find it wher can i turn it on
video settings -> shaderpacks
okay imma try rn
Better mc neoforge v34
Hey I used to play a better MC server and i remember ravager horns dropping from raids. Does anyone know what mod that was?
with regard to updating from v43 to 44, is it literally a case of overwriting the serverpack? and then the users update/change to v44, and can continue playing the same world?
yeah
you can make a backup of your world just in case which is what we recommend but it wont break the world
Better MC 5 - v34 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) curse forge
- Have you changed the modpack in any way except mods? only recourcepacks
- v34
- Have you ever gotten past the crash condition without crashing, or does the game always crash? first time i did that and first time it happened
- What steps cause the crash? was in the accessory screen then clicked on a arrow that said "page 2"
latest.log | debug.log | crash-2025-06-30_21.53.34-client.txt | crash_assistant_app.log | modlist.txt | CurseForge: skip launcher
Mod list changes beyond the modpack:
Added mods:
[2;32mRibbits-1.21.1-NeoForge-4.1.2.jar[0m
oh forgot i added one mod named ribbits
like is it legit copy serverpack, paste into server and overwrite? or delete mod folder entirely
does v44 just fix known bugs etc or
you can overwrite or you can bring over your world folder from the old serverpack onto the new one
v44 has changelogs in its curseforge page you can check that
oh duh, thank you! appreciate it
did you try to press an arrow key inside your inventory
im just thinking about this as i play, im a noob so im not familiar without checking, are all the variables to do with players, their fog of war on worldmap, etc all within the world folder?
all inventory level etc is in there yes
idk what you mean by fog of war but worldmaps are stored clientside
you can also bring in server.properties if youd like
yeah like areas revealed in xaero's
you can also overwrite the stuff which should be fine
let me check how bisect do it with upgrading, i forgot im not doing self managed anymore where i would have had to upload the folders if i updated
do salt rocks have any use?
what server installer do i use for forge bettermc4 v43 ? I'm trying to use the 1.20.1 straight from forge, but i dont think its working
i think it has to do with the fabric connector stuff but im not sure
!server read the selfhosting guide
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
thx u
- What Minecraft version are you using? 1.20.1
- What launcher did you run Minecraft with? curseforge
- Have you changed the modpack in any way? i had to remove the mods that only used fabric and then added a few mods and a couple resource packs
- What version of the modpack are you using? v44
- Have you ever gotten past the crash condition without crashing, or does the game always crash? it always crashes, i tried it maybe 4 times
- What steps cause the crash? it crashes when i try to start the world
Uploaded crash-2025-06-30_18.51.00-client.txt from @lean widget to mclogs: https://mclo.gs/H1QxVty
after multiple nights in a row at the world border i've gotta ask: what's the secret to finding the farseer?
?????
Reason: cracked
Moderator: @agile cradle


agentx250 [382227889204232192]
jsgldkjgfljsdfg
Reason: tlauncher
Moderator: @sweet spade


dinomentalen [352882403683074049]
I swear I hate you discord
Better MC 4 - 44 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) - CurseForge
- Have you changed the modpack in any way except mods? - No, I only added a few mods.
- 44
- Have you ever gotten past the crash condition without crashing, or does the game always crash? - No, it's never crashed before.
- What steps cause the crash? - I just pressed the play button and tried to open the game on CurseForge.
latest.log | crash-2025-06-30_19.38.12-client.txt | crash_assistant_app.log | modlist.txt | CurseForge: skip launcher
Mod list changes beyond the modpack:
[2;32m37[0m added, [2;31m0[0m removed, [2;34m0[0m updated.
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
Are one of the dev's around to look at my log file from yesterday?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
It keeps telling me that stupid error crap.
yeah it usually will still go thru
which means it won't show in some of the log channels 💀
I'll likely have to go ask them what the heck and how to minimize that from happening cause it's 89% of the time I'm using it now
😭
Where are these kids parents, them telling people to kill themselves, they both need popped with a 5k fine
Hi, I have well behaved children with excellent manners. However, their MC server is down atm. Could someone please review and assist me. - Dad.
Uploaded crash-2025-06-29_14.23.23-fml.txt from @crimson jasper to mclogs: https://mclo.gs/Vve55G1
We love responsible parents here. How's their server hosted? From home on a computer, through a hosting site?
home server, Ubuntu
Where did you download the serverpack from?
I updated via website server pack download, received this error, then tried a copy from the forge app. Same results :/
has it been changed in any way, updated any mods, add or take any out?
it's just 1.20.1, was v39, then I replaced the folders with the new version's
I see the suspected mod is saying it's MiscTweaks. which is a mod to modify the mouse movements.
I never touched that one. The only configs I've changed for mods were related to mob spawns
but that was certainly wiped out with the mods folder being replaced. Also, I know my args are a bit strange... but I don't really understand them.
helloo sorry I was messing with the shaders on game and it crashed (my fault) and wont let me back in the game basically T^T is there any way to fix it?
you can try disabling shaders from the settings menu before popping into your world see if that works
Oh okay! let me try that
what sort of args?
may need to report to misctweak's
nah those are good
that's a relief, I just found that stuff somewhere and copied it.
try reporting the issue there, they may have a better idea of what's going on. as for args we got some other stuff if you ever wanna try it
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
ty! yes, whatever would be best for performance gains. My son actually plays on the from hosting server while a handful of his friends join. What I've been using solved a good bit of stutter. Though, trully I don't know what I'm doing.
It crashes when it gets to the lunapixel load screen? so it wont let me in at all
!ca
there's a few guides in the comment above this, check that out. Spark is also good if you're worried about too many spawns in a small area or leaky farms
Better MC 4 - v42 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) CurseForge
- Have you changed the modpack in any way except mods? No
- v42
- Have you ever gotten past the crash condition without crashing, or does the game always crash? The game doesn't always crash.
- What steps cause the crash? It started to crash more when I was messing with the provided shaders in video game setting T^T apparently, one of the shaders isn't compatible with my mac
latest.log | hs_err_pid2358.log | CurseForge: launcher_log.txt | crash_assistant_app.log
# Problematic frame:
# C [libGLProgrammability.dylib+0x8b544] glpLLVMGetFunctionGlobalVariableUse+0x74
Found [2;34m1[0m log analysis results:
[2;34mMacOSIncompatibleShaderDriverIssue[0m in: hs_err_pid2358.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
how important is it to run GraalVM instead of OpenJDK ?
not game breaking, but we've seen it's more helpful as oracle makes it a pain to go back and download versions that didn't just release
yes, I have experienced that nonsense myself... didn't know there was an option!
Java likes to push only the latest version (which is currently 25) but other sites like graal make it so much easier to choose specific versions. Plus the packs aren't stable on anything later than 22, most of the improvements are on 21 as even 22 can be fussy
i just have a quick question, if i left the program file open that opens my server, would it cause my pc or the server harm?
dont click the page button, just scroll instead
please do not remove mods any circumstance
there are no mods that "only use fabric"
the modpack uses Connector to make fabric mods work on forge
your install is completely broken if you removed the "fabric" mods. you need to do a fresh install
this is the wrong mod
you likely didnt update your server correctly
has nothing to do with misctweaks
and hiddentides linked the wrong mod
are there multiple of a similar name?
i would recommend doing a fresh install of the latest serverpack
and then transferring your old world folder
update to v44
yeah i did, game ended up crashing again while i was playing so i just decided to set up my own pack
ah that one has a space.
no
I thought curse was super fussy about mods with almost the same name
!ca
any chance the recent update would have goofed up waypoints in the nether?
all of my saved waypoints in the nether ive noticed just now are way off
im just woundring if i disable season's on bmmc4 would that allow me to grows crops as many times i want to
it can, but you can also just throw a roof on top of your farm and have lighting and you'd be fine
ah ok i just hate winter that's all
I'm using betterMC forge version 43 and I'm trying to make a netherite pickaxe, and I can't seem to get it. I made netherite ingots and I put them into a smithing table with a smithing template and a diamond pickaxe but it gives me a big red X and won't let me make one. What am I getting wrong here?
update to v44
Is it possible to keep my world doing that?
yes transfer your saves folder
Thank you <33
what modpack version
v44
send a screenshot of the leaves
nvm im just dumb lol
nvm again
its just depending on where the leaf it
Hi, can anyone parse this crash log. My server has been running fine for the past few days then all the sudden its crashed twice within a few minutes with what seems to be the same reason. this is the crash log. im using the most recent better mc pack on 1.20.1
Uploaded crash-2025-07-01_06.00.46-server.txt from @fiery marsh to mclogs: https://mclo.gs/KzBzAiL
Uploaded crash-2025-07-01_08.53.19-server.txt from @pearl sedge to mclogs: https://mclo.gs/ISh7Bu1
Better MC 4 - 44 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? ATLauncher
- Have you changed the modpack in any way except mods? No
- 44
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-07-01_11.00.16-client.txt | atlauncher.log | crash_assistant_app.log | modlist.txt
Mod list changes beyond the modpack:
Added mods:
[2;32mvoicechat-forge-1.20.1-2.5.32.jar[0m
Please read the full contents of the #get-support channel for us to provide assistance.
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
try without voice chat
How can I get the race drawing to appear when I choose it in the Medieval Origins mod? I only get squid ink.
.q 736970774597861376 ?r TLauncher
Reason: TLauncher
Staff: @stone mountain

fazi_4_1 
All users were quarantined!
???????????????? Yes
I'm already on the official account and it works here.
Not sure what the question marks here are for
That's not your Discord user ID
Hello! I'm trying to install Better MC modpack on my ubuntu server at home so i can play with my friends. But i dont know what i am doing. Could somebody here perhaps help me? The Server runs on Ubuntu Server and I am interacting with it via AMP.
Hey server's crashing on java 21, latest modpack version
downloaded server zip file from curseforge,
changed JAVA in variables.txt to installed,
ran start.sh
Mod File: /media/small/mc_borys/mods/Kiwi-1.20.1-Forge-11.8.31.jar
Failure message: Kiwi Library (kiwi) encountered an error during the common_setup event phase
java.lang.SecurityException: setContextClassLoader
Mod Version: 11.8.31+forge
Mod Issue URL: NOT PROVIDED
Exception message: java.lang.SecurityException: setContextClassLoader
Uploaded latest.log from @nimble yoke to mclogs: https://mclo.gs/sJaDWA3
any way for you to access the terminal?
can you make a github issue on kiwis github
this crash has been here for a long time now but idk if anyone ever made a github issue for it
i also don't know how to disable kiwis update checker or let it through firewall so wont be able to help you fix it rn
Hello, I need help finding the error and possible advice on what to do, I have a server on Enderchest 20RAM, I installed the BMC4 v44 package, yesterday everything worked fine, after a night the RAM went crazy and I have 100% usage and no one is on the server, I would like to finish the server so I can play with my friends
Spark : https://spark.lucko.me/Udcs9jlYl7
I would be grateful if someone could explain to me what I can do to make the server work normally.
Uploaded crash-2025-07-01_13.50.22-server.txt from @pearl sedge to mclogs: https://mclo.gs/y7oNn5s
Is there any server-side mod for hiding armor textures? 😦
Yes, i can acces the therminal via my main pc or i can just go the the laptop that is hosting the server
Can we play this mode with friends in Aternos?
hello, is it safe to update the BMC4 modpack? i got a warning saying it could potentionally break the games if some mods arent compatible yet and it cant be undone so i just wanted to double check first
!aternos
We don't support Aternos nor can we assist you with using it for reasons listed below;
- You are unable to add / edit the mods to implement a fix that can be game changing at times.
- We are unable to control the updates of our packs on Aternos, nor ever will.
- The hosting is not strong enough to host our packs on there without it crashing every so often.
- We have other free methods that work much better than Aternos does. Run the !ws command and the !server command in #bots for more information on how to host a server for free.
you can update the modpack, but dont update the mods yourself manually
okay, once i update the modpack do i have to do anything else for my server? im using the free server host method
Does anyone use mekanism in there neoforge server? If so have you noticed any bugs since it is in alpha? I got a warning so I’m just checking
u need to update the server and client to the same bersion
try ask in #1061339968691257466
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
how would i update my server?
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
thank you!
could you send your latest.log?
!logs
To better assist with fixing your issue, we will need some logs:
- Curseforge -> Right click the modpack instance -> „Open Folder”.
- ATLauncher -> Click „Open Folder” on the modpack instance.
- MultiMC -> Select your instance and click „Instance Folder” on the right.
- PrismLauncher -> Select your instance and click „Folder” on the right.
- For servers -> Open the folder containing your server files.
To find the „latest.log” file, navigate to the 'logs' folder.
To find the „hs_err_pid.log” file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the „crash-reports” folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Which version of bmc4 does it support?
is there any lfg channel for bettermc
support what? bmc4 is on 1.20.1 if thats what u mean
im sorry, im having a tough time understanding the video. for me to update the server, i would replace the folders in the old version with the new version or do i drag ALL the files into the old version?
Uploaded latest.log from @pearl sedge to mclogs: https://mclo.gs/9aFp2s4
latest
just bring over the world folder to the new version
how would i boot up the server from the new folder? i dont see a start.ps1 file
follow the installation like how you did it the previous time, theres a readme file if you need help with it
i dont see a read me file
Hey quick question, for BMc5 what mods/datapacks/etc…. if any, change the nether? Is there an overall or terrain generator mod for it like incendium?
thank you!
im trying to launch the free server for better mc bmc5 but it says im missing the mod called backpacked on the serverside but i need it for the client???
client and server are not on the same version then
how does that make sense hol up
?
wait u mean like minecraft version like 1.21.1
or like v34
its the same version idk what wrong
To better assist with fixing your issue, we will need some logs:
- Curseforge -> Right click the modpack instance -> „Open Folder”.
- ATLauncher -> Click „Open Folder” on the modpack instance.
- MultiMC -> Select your instance and click „Instance Folder” on the right.
- PrismLauncher -> Select your instance and click „Folder” on the right.
- For servers -> Open the folder containing your server files.
To find the „latest.log” file, navigate to the 'logs' folder.
To find the „hs_err_pid.log” file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the „crash-reports” folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Why are there only these versions in the server installation? How can I install with versions 1.20.1 or 1.21.6?
Uploaded latest.log from @wanton spire to mclogs: https://mclo.gs/HQJfl02
what are you installing?
whwre did you get this powershell file from
thats not from us
.
reinstall the modpack ig, and make sure your on the same version
.
last question, aside from the world file, do i also have to drag the files config and default config folders into the new one?
you can ignore the java bit, or select above 1.18.2
no
i cant look through it on my phone will have to wait for someone else
oke
better mc neoforge v34 modloader curseforge, why does nothing change when putting mobgriefing on false?
did you add and then remove mods inbetween the last time you opened this save and this crash
no
Can I use amplified terrain
only betterx world type will work
Alr thank you
What does it like disable?
Cause my friend likes the bigger mountains and he’s interested to see what it toggles off and stuff
the game will just crash if you try to load into a world not set as it
I updated to v44 but now it’s saying this? What does this mean?
either the server isnt updated or you updated mods
When I updated to v44 does it not auto update everything and the server itself?
Or does that mean ^^ I have to update both of that mods stated ^
mods get updated thru versions yes but people also like trying to manually update stuff
it does not update the server itself youd need to update server side too
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
Has anyone fished in this mod? I build an automatic fish farm and left it over night. I have luck of the sea 3 on my rod and I have not got one book or rod
Vanilla question, but are you sure your water is large enough and meets all the other vanilla criteria for Treasure loot?
It needs to be larger
It's been changed
Minecraft Wiki should explain, or some YouTube videos
Oh really. I’ve only recently started playing again
Yes, Mojang nerfed fishing farms
5x5x3 if has to be
Hi, can anyone parse this crash log. My server has been running fine for the past few days then all the sudden its crashed twice within a few minutes with what seems to be the same reason. this is the crash log. im using the most recent better mc pack on 1.20.1
- im using minecraft 1.20.1
- im using forge server 47.4.2
- The modpack is standard BMCv4
- The modpack is v44
- The game crashes only sometimes in the middle of playing, it happened twice with the same reason. The server also gets really laggy before it crashes
- I dont know what causes the crash
Uploaded crash-2025-07-01_06.00.46-server.txt from @fiery marsh to mclogs: https://mclo.gs/zAlH6xX
how much ram do you have in your system total
is it 15
16*
32
Virtual memory max (MB): 24156.92
Virtual memory used (MB): 8548.61
Swap memory total (MB): 8192.00
afaik virtual is swap + ram
can you try allocating like 12 maybe as first step to debug
if that doesnt work see if you can run a spark profiler before it times out
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
12 in total
is my server using swap instead of physical memory?
like is a part of its pool swap
no it seems to be using 120mb only in swap
anyone else not able to access chests? I right click and it does the open animation but the inventory screen doesn't pop up
how frequently are suggestions gone through and approved/denied?
resend it please, the link expired
For now I have reinstalled the package, if the problem reoccurs I will ask for help / Additionally I have removed 3 mods and RAM for now at 38%
Hi, i have a problem with crashing mod pack before it even launches, it was all good today a few hours earlier then i decided to add distant horizons mod and clicked update button for other ones and now game wont open even when i disabled distant horizons plz help. Better MC 4 - v43 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- curseforge
- i updated mods and aded 8, that didnt crash before
- v43
- it started crashing for the last 3 times i tried to play the modpack, after ading distant horizons that i turned off next but game still crashes
- launching
latest.log | crash-2025-07-01_22.00.07-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log | modlist.txt
Mod list changes beyond the modpack:
[2;32m9[0m added, [2;31m3[0m removed, [2;34m30[0m updated.
reinstall the pack and do the changes one by one
don't update mods
will do
didnt know wont do it again
now it works, didnt add the remaining mods yet but i wanted to ask is there a possibility to transfer the world i had running before on to the new install ?
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
thx for help
would anyone be able to help me with getting the create mod added to this modpack? i'm having trouble with getting the versions to match up
#1061339968691257466 for that
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
thank you!
does anyone know why i am getting this random block of cobblestone on my screen?
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
literally as it says
on your screen
"1.18.2 or newer"
lol
thats 1.21.1+
try a fresh install of the serverpack
only transfer the world folder
what modpack version are you on
please do not remove mods
there is no reason
like 5% are approved
update to v44
yeah i figured as much. i think i have a good one though
Newest one
It stopped saying that but there more lag the useual
which one specifically
What do I need to reconfigure to get my uncrafting table to work? I get a message saying I need to activate something whenever I try to use it. It says something about changing the config files but idk what to change :/
twilight forest mod config
Right what exactly do I need to set to true
im p sure its just listed as uncrafting table
hey im having issues with the modpack it says that i added mods that are incompatible but i cant figure out which ones
did you add essential
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
oh okay thank you!
44v
send your latest.log
is there a bmc server?
no we dont host any offical servers, #community-servers-info #1109323795556216862 for unoffical ones
do you know if better minecraft plus has an official server
that is such sad news
How can i add someone to an already exsisting world?
@agile cradle fixed the issue with MiscTweaks - needed to update forge server and use graalvm. All is well. Ty!
sorry for the ping, but think you could help me out rq?
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Right, but what do i need to do with the address?
they put it in direct connect in multiplayer
is there anything in the 1.20.1 pack to trigger a thunderstorm?
how did you even get bmc plus
why do ppl ask about it so much as if its recent
where did you get it from
its been archived for legit like 3-4 yrs
can you do an xp farm with the armored blazes?
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
tysm
does the eyes of the void not work? right clicking it just kinda shakes in your hand, it doesn't throw
how do i fix this?
Better MC 4 - 44 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- 44
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log | modlist.txt
Mod list changes beyond the modpack:
Added mods:
[2;32malexscaves-2.0.2.jar[0m
[2;32mAnimation_Overhaul-forge-1.20.x-1.3.1.jar[0m
[2;32mChunky-1.3.146.jar[0m
[2;32miceandfire-2.1.13-1.20.1-beta-5.jar[0m
[2;32mjumpanimation-2.0.0-1.20.1.jar[0m
[2;32mrefurbished_furniture-forge-1.20.1-1.0.14.jar[0m
do i have to ask here for a problem that dont even allow me to install the modpack?
yeah. what launcher you using
ATlauncher, and this is what happen when i try to install the 1.20
did anything pop up for you
how often do you guys run into villages?
it just say the modpack dont install and to check the log
that's it no other pop ups before that?
and literally out of nothing it installed correctly
technology. sounds about right
can you try again in maybe like an hour
hopefully mc servers are responding by then
!fps try following this guide especially the memory part
Had to go like 10k blocks from spawn for one, but have only played one world, checked using locate commands and I didn't miss any
my server is running really slow. i know that i should run my server on another computer and not the same computer as my main discord and client computer but it shouldnt be this unstable. this is a record with 3 player on the server doing normal mining and farming stuff on a 8c16t 16gb ram computer with the server configurated with graalvm 21 and aikar's flags on flags.sh allocated with 8gb of ram. this is the profiler link: http://spark.lucko.me/IUZzMyOcfD
live viewer if needed: https://spark.lucko.me/lK6vaqLXvh
are both the server and the client on the same 16g computer or am I reading it incorrectly
i was pushing my dragon into nether when it said failed to decode packet
i feel like you might wanna allocate more ram to the pack but for now try killing any pet dragons you have or just removing the dragon mounts remastered mod
!moreinfo answer these questions and attach your latest.log
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
1.21.1
1.21.1 curseforge havent changed it v26 it always crash when i try joining im in half a second then it hapens it was when i was pushing my dragon into nether
how do i out latest log
oh yeah there are like 10+ dragons just sitting there
how do i attach latest log?
i have like a crash assistent is that like a crash report ?
you aren't on the same modpack as the server
you didn't install your server correctly
you're missing all configs
please test the mods you're adding before adding them
v26 is very old
please update to the latest version
i meant v29
how do i clear drawings in xearos plus mod
but it works
i cant really change it im not OP and the person with OP is away
because the server is on v29
how many dragons is appropriate for a server? and my computer still has a lot of headroom left but the server is only taking up ~4.4gb.
Anybody know or can find out i doubt its a complicated fix
Please help me how to play Better MC 2 with someone
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Better MC 5 - v29 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v29
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | debug.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
there is a chance this crash was fixed in the latest version and even if it wasnt you arent the server owner so you arent able to fix the crash unfortunately
ok
as it requires the server owner to either kill a dragon from the console or delete the dragon pet mod
but is it any way to fix it without becausse server owner is gone
no
i assume you crash before being able to even enter the server
unless you can find a way to kill the dragon in the nether
without crashing then you will need the server owner
yes that is also very very old lol
you need to update the modpack dude
put it in the mods folder
its on server so i cant
as many as you want
get the server to update
can server owner away
which one should i download
the latest version of the mod
mhm
idk why you downloaded 6.0.0 though lol
TODAYS THE BEST DAY EVERRRR
im using bmc 4 :3
GOD DAMN IT
well whatever cant have everything in life
lmao
well they cause lags as mimi said but i guess thats my computer issue
!ip
that specfic one was just buggy imp
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
imo*
whats the ip guys?
no way a single entity can impact tps that much
what ip
i dont know what you mean by original but you can find servers in #community-servers-info and #1109323795556216862
How do I find my old comment? I don’t know if I got a answer
How does world share work
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
also does the server automatically stop using more ram when system reached 80% or something cuz i gave it 8gb and my friends are constantly generating new chunks
Ok where do you type the code
Multiplayer menu should have the Direct Connect button
But it didn’t work it wants some mod called item interaction on the client side?
The server will use memory depending on your Xmx and Xms values (that define the "heap") plus some more on top of it ("off-heap"). It doesn't really care how much memory you have, and if you specified more than available - it should just crash
World Share needs both sides to be on the same version, with the same mod list
Make sure that you both update to the latest version of the pack
It is on v30 the newest is v34 but it doesn’t work to reinstall, it just stays at v30
But I have updated in the past
It just can’t be on the newest version
I finna crash out
What the fuck is the client side?
Why does it not work
Why can’t we just use essential mod
So much easier
I love the mod
But I hate the world sharing shit
Answer
At least one of the bad robots could answer
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Yeah
Bad robot
As I said
Didn’t even answer half of my questions
fuck this
Hi Everyone, I was getting the "java.lang.error security manager not supported" error while setting BMC4 Server pack v44. To fix this I downloaded GraalVM, placed it in my java folder and set the JAVA_HOME environment variable to resolve to the GraalVM installation directory and set the value of the PATH environment variable to the GraalVM bin directory. Running echo to check shows it worked as per the image. Checking java's version confirms the same.
But when I go back to run the start.bat, nothing happens anymore.
Try with GraalVM 21 instead
checking
No difference unfortunately.
Ill try one more potential solution
it wont use more memory and i dont think thats my cpu or disk issue
i already allocated it to 8gb
So what is the problem statement here?
still nothing. Using start.bin results in no effect anymore. Should microsoft\windowsapps be appearing in the list?
I have windowsapps in my PATH too. So, if it's still not working - can you share logs of the error please?
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
.q 744229439075909672
Reason: No reason.
Staff: @stone mountain

forrester_green 
All users were quarantined!
They need to not use TL Legacy 😄
Hello ! I just successfully made a BMC server (v39 1.20.1), but I am now facing an issue, I'd like to know if any of you know the answer.
I want to share my world with my friends, so I followed the explanations of this video : https://www.youtube.com/watch?v=tLTC6wYcWVM
The issue is : When I click on "Share World" in the settings, the screen capture below this message appears.
So, the question is : How do I do to share my world and to let my friends join it please ? 🙏
Thank you for your clarifications (the BMC language is french here btw, sry for that)
➔➔➔ You can use the start.bat now instead of the start.ps1 on Windows
How to Create a Server for Minecraft Modpacks from Curseforge & ATLauncher
➔ Graal/Java: https://github.com/chorbintime/download-graal/releases
➔ Bisect Hosting: https://www.bisecthosting.com/p/lunapixel
Explaining: 00:00
Download Server Pack: 00:55
Set up Server: ...
Theres no error logs I can find over the .bat file, before I tried GraalVM this was what I was getting. Right now though, if its not functioning it seems its an issue with the path or java
Are you sure you are using the good java version?
I got this message when I was using the version 24 instead of the version 21
But if it is with graal, maybe it is tge wrong graal downloader
Is there a way to remove specific enchantments or keep some and take off the one I don't want? I am on better mc 4
Hey
Is there any video about how spawners works in better mc?
How should I make a mobspawner... giving blocks of distance between each spawner or isn't necessary?
And what is the best mob to make a spawner
Hi, I have block stuck in the sky, it's not placed in any way - moves with my mouse. I tried to restart the game. How to get rid of it?
u dont hope this helps
Reason: tlauncher
Moderator: @sweet spade


marshmalo6969 [768017030737297418]
Is there something in the default settings for this mod pack that would hobble how often villages spawn? I'm testing some known seeds with pretty much the same mods in other packages and it's very difficult to get villages to spawn at all.
you dont use the port number
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
oh
is it normal everytime I try to join my friend i get kicked out in like 10 minutes
no it is in fact not normal
how can I fix that
now it says failed to connnect to server
unknown server check address and try again
v39 is very old
update to v44
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
please give more info
I'll do that thanks !
Nvm I was able to fix it
Still trying to setup my server. Additional details: I have graalvm 21.0.6 and jdk 21.0.6 with win 10. I set the environment variable but start.bin is not working anymore so im running the start.ps1 with powershell after using vSet-ExecutionPolicy -ExecutionPolicy Unrestricted -Scope CurrentUser to remove the restriction on the latter. Getting this error message now.
does vein mining in bmc Forge differ from Vein Mining in Fabric? I thought in Fabric vein mining only worked in ores by default
use the start.bat
Tried, but after I downloaded graalvm and changed the Java Home and Path environment variables to it, the start.bat no longer works. I click it on it and nothing happens anymore.
I was previously getting the "java.lang.error security manager not supported" error when running the start.bat so I got GraalVM as per a previous suggestion made here which worked. But then start.bat seemingly stopped working.
Does anyone know why recipes shift and move around in the crafting recipe book particularly when you go to make more than 1 copy of an item
anyone know the best way to find the suspicious sand?
has there been any other reports of eye of the void from cataclysm unable to be thrown/used in bettermc 4?
i keep getting "java.lang.NoSuchFieldError: TOOLTIP_SHIFT_FOR_INFO" whenever i hover over a certain knife in the crafting menu
you're on an outdated version that bug was fixed
Hey, I recently started getting into better mc but theirs a lot of versions of it is their like an official version people use ? And what’s the difference between better mf forge and fabric?
!define
Curseforge - Refers to both the Curseforge website and Curseforge Launcher. The Curseforge Launcher is a modded launcher used to play & install modpacks. ATLauncher is a better alternative. All modded launchers can be used to install & play both Fabric and Forge modpacks.
Modpack - A collection of mods. "Better MC 1.19.2 Forge", for example, is a modpack.
Modpack Version - The version of the modpack you are playing. v5, v6, v7, etc.
Minecraft Version - The version of Minecraft which the modpack you are playing runs on. 1.16.5, 1.18.2, 1.19.2, etc.
Mod - A .jar file which modifies the game in some way. "BetterEnd", for example, is a mod.
Forge - A mod loader which allows you to use Forge mods.
Fabric - A mod loader which allows you to use Fabric mods.
all bmc's are offical
the ones maintainted/regularly updated are bmc4 & 5 for forge/neoforge and bmc2/3 for fabric
each have slightly differing mod lists of whats available on that loader & major game ver
ahhhh Okii thank you!!
oh thx
hi i cant install bmc 3 in premium launcher
error 1 says to me
same for better mc 4 but error is -1 now
oh sorry
are you just using the vanilla launcher
im in premium launcher
like just the default minecraft one
you need a modded launcher to run modpacks properly
im with forge
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
its bc i want to play it with a friend then and try to play essential
and essential is only able in premium launcher
i witnessed a lot of people doing it but isnt even opening for me
PING
so sorry didnt knw
So why are you saying "premium launcher"
oh how can i play with a friend???
...so you're trying to use the Minecraft Launcher to play modded
Again, use something like ATLauncher
okay so a. youre trying to use the vanilla launcher that doesnt work like i said b. you downloaded the server pack for servers not clients 😭
oh
please follow the instructions here and the pack will be installed for you
so with atl i can play with my friend?
you can run the game with atl
You'll be able to play the pack, and you can play with your friend, yes.
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
okay thank you so much have a great day
Reason: tlauncher
Moderator: @sweet spade


chomykko [397364832468467716]
