#better-mc-forge
1 messages · Page 405 of 1
Maybe a bit of a basic question, but how can I disable these outlines on certain enemies? (the zombies inside the temple) I combed through all the settings but can't find anything relevant (Better MC v39)
I might be wrong but im pretty sure that happens when the necro summons them
There's no necromancer in there, just zombies and spiders haha (but the spiders are not highlighted?)
make note of the mods you added/removed and do a fresh install of the pack afaik
if that doesnt fix the crash than resend the new crash logs and someone with more knowledge will help later
Better MC 5 - v21 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v21
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32me4mc_minecraft-neoforge-5.3.0.jar[0m
a fork of e4mc is already in the pack, remove it
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
I downloaded the server mod pack and copied it, but when I access the server I get this error. Is there a solution or have I done something wrong?
ignore, follow tides advice, my apologies
hey so everytime i mess with the dragons
like the quest and a dragon itself
i crash
!ca
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-04-12_18.50.59-client.txt | CurseForge: launcher_log.txt head / tail (~39k lines) | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mmoreminecarts-1.8.3.jar[0m
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
pls help my ice dragon is on half a heart 😢
i got a dragon and whenever i click on the dragon care 101 i crash and everytime i right click on my dragon i crash
not on same version as server. where did you download serverpack from
send a screenshot
just do a fresh install
its not an outline
they just have the Glowing potion effect
v21 is very old
please update the modpack
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
you added the moreminecarts mod and its crashing your game
😦
well i figured when i saw moreminecarts
i just tried deleting and resatrting it
does better mc have faster minecarts?
no but it has waystones
damn
there goes the bullet train idea
ive been trying to find a solution aside from tick speed since none of us want to put tick speed up but nothing on forge is just a simple minecart speed change
For the newest forge version of bettermc, the announcement talks about the hostile mob spawning issue which we have had, is it known for certain that it has fixed it? The command provided in the announcement doesn’t seem to work, so I broke it down individually, but it didn’t seem to cull any large number of entities. I was wondering if a relog may be necessary as well or if there’s still been complaints
Referring to this^
in the settings
video and general
video settings -> shaderpacks
top right
several preinstalled
!tps run the command at the bottom
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
ty for helping ppl btw @sweet spade
Thank you so much @viral garden . Should I touch it or view it at all afterward or?
I appreciate the help
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-04-12_22.21.57-client.txt | CurseForge: launcher_log.txt head / tail (~27k lines) | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mweather2-1.20.1-2.8.3.jar[0m
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
i try with my very limited knowledge from just reading yours and other staff responses! very in my nature to try to help ,you should see me on the kpophelp subreddit 
kpophelp subreddit sounds awesome..
send the link here after
yo so i got a aether dragon egg but i placed it at the wrong place can i pick it up again and replace it?
indeed super awesome, i learn things a lot even as someone whos been into it for years
its just r/kpophelp if you ever want to go lurk it, thats fun as is too
https://spark.lucko.me/1dd5OFKafX
Let me know if i did this right 🙂
no one got an idea? 😦
its likely weather2 causing it
yeah using the spawner+ mod would be better
not to my knowledge
you may be able to carryon it tho
im scared
if you ever have any questions you're free to ping/dm!
it wont spawn aggressive, unless you let it become an adult and dont tame it in time iirc
the questbook explains all of that
will do, i appreciate all you do too!
so it will still spawn in and i dont have to worry about the height requirements and stuff
you may need to make space for it
but it spawns pretty small as a baby
im not sure if this method works w modded eggs but w vanilla dragon eggs you can put a torch below the block its on and when you destory the block the eggs on itll fall and turn into an item
chloe can cmiiw w it working on modded ones though
I think spark profiler is saying the mob # we have is not good LOL .. but not totally sure. Super cool thing tho
send the link here
^ @viral garden
Please read the full contents of the #get-support channel for us to provide assistance.
you had a slime spawner somewhere
which was affected by bug from v37
oh..! Huh
thank you so much!!
ty*
im filling that out now but my game wont start it just crashes
okay
1.20.1
CurseForge
I added multiple mods but it was playing perfectly fine and I didn't change anything
v36
No I haven't gotten past the crash
Idk I just try to start the game and it fails
Crash Report - https://gnomebot.dev/paste/mclogs/19KlDNZ
Latest Log - https://gnomebot.dev/paste/mclogs/cRCnkv0
update to v39
Ok
Theres a bug, when you drop any egg from dragon mounta itll turn into another egg type
Like if i drop a forest dragon egg it randomly turns into another egg variant when it drops into an item
Onto a torch
unfortunately the dragon mounts mod is abandoned lol
also btw, im gonna upload ur screenshots soon, just been busy today
ill lyk
!ca
1.20.1
CurseForge
I added multiple mods but it was playing perfectly fine and I didn't change anything
v39
No I haven't gotten past the crash
Idk I just try to start the game and it fails
latest.log | crash-2025-04-12_23.18.12-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m67[0m added, [2;31m0[0m removed, [2;34m3[0m updated.
^
update to v39
dont add accessories
and dont use an old version of create
sorry it is v39
also idk why you added questsadditions lol, and dont update mods
https://mclo.gs/M9IQDVa https://mclo.gs/UCfO4J6 https://mclo.gs/vZRP0j1
added a bunch of mods, and its crashing :/
!ca
some of the mods i have need that version of create, idk i pasted what the video said to, and i havent updated anything, besides to v39
do i gotta install the discord app cause its just redirecting me to an invite link to this server
just remove whatever is incompatible with that version of create
its a video
watch the video
and follow the steps
i did
okay, can you send the message here
i cant remove any because my world wont load if i remove them
yes, your world will load
ok wait so i just paste my form
mhm
are there glass slabs or any horizontal glass blocks?
hey so ive been tryna make a vanilla+mod pack for me and my freinds what all are the mods thats allow u to see crafting recipes, make recipe trees etc
is that all JEI?
specifcally i just want the ones that this mod pack uses
jei
mhm
What’s the mod that lets you chunk load and set claim protections?
From the minis
Minimap
opac, open parties and claims
Does it work from journey minimap?
If not I guess I could just use the commands to claim or switch minimap mods
the built in maps that bmc uses? yes
I think it used xaeros not journey minimal
Minimap
Or are u saying i have to use that mod specifically
All good I just was using it cuz the interface in the big map looks nicer IMO
Thanks, just making it way more vanilla then it is
I appreciate it
Oh also I suggest adding that one mod that shows blocks mobs can spawn on via light levels when u press f7
It’s awesome
imo, mods like that I would love to see as a default in packs, but of course not everyone will use it
long as they don't cause interference like lag or whatever
It doesn’t
It’s a super awesome QOL mod
I've seen the hermits use one for a very long time
Esp for mob proofing ur base, it even wont highlight blocks that aren’t spawn able, even if light level is permitting
We can all learn from the hermits
fr
Can I link u a video I found that is an exceptional vanilla + modpack that this modpack could totally use from
(Here)
you mean vanilla plus mod?
Nah
cause you said modpack twice
Vanilla perfected
can't combined modpacks goober
No but im saying u could take the mods out of it that are compatible
The UI mods, are great
don't think the devs would do that, but if you wanna chat about the pack itself you could in #1061339968691257466
Oh and it has a shulkerbox mod that all of ur mods should use
I'm not a dev, baby stage learning
It makes shulkerboxs work like bundles essentially but even better
Today I'll be showcasing my brand new Modpack for Minecraft 1.21, Vanilla Perfected! In the future I plan on making a few different versions for the pack depending on it's popularity, but for now it's only available on the Tricky Trials Update, and for Fabric. Much love everyone, I hope you enjoy playing it!
🔔 𝗦𝗨𝗕𝗦𝗖𝗥𝗜...
The UI mods there are so good
But it lacks the content and additions that this mod has
Reworked Shulkerboxs would be so good for prom2 im always running around opening my enderchest and placing shulker boxes everywhere to sort
any time you wanna suggest mods, you'll wanna put them in suggestions, but check pins cause some stuff won't ever be in any packs
Oh okay
"don't make me catch you using optifine" roasted
When I’m more rested and less baked
I’ll put a suggestion together thanks
Give me shulkerbox rework in all the mod packs or ima cry
Maybe I should test if it even is compatible with prom
I like whatever the shulker labeling mod they use on hermitcraft is. Not sure if it's one from X's Vanilla Tweaks or a mod itself, could be a custom one they had commissioned not sure
check keybind menu
ive only saw two binds
which keybind tho
read them, it explains them
:/
i do not see it
oh lovely 😭 \
boom town map
I made it look like there are jacaranda trees embedded in the pillars
purple trees mentioned
they look so goooood
especially with the dark oak
i set up my home in a huge lavender field with a jacaranda forest north and south of it
agree
by set up i mean i have a partly finished house im workinng off a tutorial on, and a just for now small home with 8000 animals in it
i have like too many dogs and cats to count, like 3 shibas, and a penguin!
DANGG THATS AWEOSME
dude i love the quark shibas 😭
theyre so cute
any tips? trying to make my chunk loading faster when riding a dragon
i switched to Graal and used chunky on 5000 radius
also, using playit.gg as a tunnel since im on apartment wifi and can't port forward (idk if this is an issue, should i switch to a different tunnel? any suggestions?)
hey chloe when will you be adding my images to the cf gallery?
playit is known to throw hissy fits
hm, should i use like, telebit or ngrok or smth else? are those better? ive used both for a website and video streaming before and they seemed to work well
any suggestions?
idk if thats quite my issue but i wanna switch off playit to see if it fixes my chunk loading issues, idk
Hello does anyone have a good seed but with the Fortress , end portal, and ancient city in spawn
Or atleast near spawn
Im trying to make a better MC server, and I downloaded the server file and all that, but I keep getting an error message in the command window. Would I ask this type of question here or somewhere else?
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Well Im unsure if the problem is that deep though, Its just saying that I don't have a file when it is already there
do java -version in command prompt
In a differen't command prompt? Because I can't write anything on that one with the error
It as the "press any key to continue" so I can't type
yes
send what it says
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
follow the guide on the top
ok awesome I think its working. THANK YOU. I've been dying trying to figure that out, but I jsut had a really old java lmao
We're still trying to figure out why microsoft launches new software without at least 17 or 18 as default with windows 
Hello, was wondering if anyone could help. I recently started a BetterMC Forge server and had to change hosts so uploaded the previous folders to the hosting website. For some reason death points aren't working in the nether anymore, at all, they work in the overworld. Any ideas? I tried deleting the level_dat files but that didn't fix it
Question: Does anyone know if villages are generated with this Better MC mod? Because I don't know if it's because I'm not lucky, I haven't found villages in my world.
yes villages are generated in the pack
Would anyone recommend any texture packs ?
It's strange that I don't find any nearby layers, they were generated far away or they are not loading those chuks maybe
It all depends on your PC and the components you have in your PC. I could recommend several, but they are very heavy, they use a lot of lighting, and they are 128-bit textures, even more so.
And if you can accompany it with a good shader, even better.
For example, I have these and I accompany them with a shader that already consumes too much, it's almost 25GB of RAM that it uses more or less.
paper sword
1.20.1
SKLauncher 3.2.10
I deleted some mods that ive tried before individually and didn't like, didn't delete anything like lib mods and stuff like that just content mods
v39
always crashes
literally just creating a world
crash report https://mclo.gs/wsHYxDR
latest https://mclo.gs/otKkyJc
1072 errors damn i rly wrecked it huh
hi guys, for some reason i cant put on the lead on my beat, any tips please
!cracked
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
Questions: Are the backpacks decorative or can they be used? And if so, what key is used?
Reason: cracked
Moderator: @agile cradle


seraph0v [514294709976432641]
i assume you equip then press b
pop them in back slot
THX
Ready, with b I have to have it equipped, that backpack is a great help to me haha
Can i get a little bit of help on why my BMC server wont start up ? These are the last two lines I receive in my command prompt every time
[07:44:11] [Forge Version Check/INFO] [ne.mi.fm.VersionChecker/]: [packetfixer] Starting version check at
[07:44:11] [Forge Version Check/INFO] [ne.mi.fm.VersionChecker/]: [packetfixer] Found status: UP_TO_DATE Current: 2.0.0 Target: null
send the actual full log
whatever log your server can provide lol, not much can be seen in either of those
what r u using to host? dedicated server or self hosting?
self hosting
os?
windows 10
It did boot up yesterday but today it keeps getting stuck
this is the full command prompt
Uploaded message.txt from @tough bolt to mclogs: https://mclo.gs/nVhdif4
whered you get the server pack from
curseforge
app or website
app
use the website download instead
Okay I'll give that a go!
seems to be doing the same thing
Can you share the full log file?
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Uploaded latest.log from @tough bolt to mclogs: https://mclo.gs/DaUnk9m
Can you also upload .\crash-reports\crash-2025-04-13_08.39.33-fml.txt?
Uploaded crash-2025-04-13_08.39.33-fml.txt from @tough bolt to mclogs: https://mclo.gs/sggdhGo
Two things you can try.
- Move our server out of Desktop directory (create something like
C:\MinecraftServer\'and put it there - Increase the Xmx value from 4G to 6G
Can you share the newest crash report?
Uploaded crash-2025-04-13_09.21.14-fml.txt from @tough bolt to mclogs: https://mclo.gs/v2A4ZWy
No idea what's causing it then. It looks like it's having issues with loading some config file. You could try to maybe re-download the serverpack, in case it's broken, and install it again?
Still no changes, I guess I'll just give up, It's probably just user error xD
Is it only my impression or is there less content in the 1.21 version? In the playthrough of chosen architect it seemed to be more content.
There's nowhere near as many mods on 1.21 compared to 1.20
Better MC 4 - v39 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
@everyone can anyone help me
windows
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- CurseForge,
- No
- v39
- Game always crashes
- What steps cause the crash?
latest.log | hs_err_pid27852.log | KubeJS: client.log / server.log / startup.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Added mods:
[2;32mFSang18's Heropack v10.1.1.jar[0m
[2;32mkubejs-forge-2001.6.5-build.16.jar[0m
[2;32mpalladium-4.1.14+1.20.1-forge.jar[0m
[2;32mpantheonsent-1.1.0+1.20.1-forge.jar[0m
[2;32mPehkui-3.8.2+1.20.1-forge.jar[0m
[2;32mrhino-forge-2001.2.3-build.10.jar[0m
[2;32mxlpackets-1.18.2-2.1.jar[0m
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
You run out of memory - close some stuff down
Guh, alright thanks.
anyone has a guide to properly progress bmc4?
I mean it's vanilla+, you don't really "progress" outside of what you'd normally do in vanilla, read the quest book
who decided it would be a good idea to remove tomes in bmc5
What tomes
Also, you sure the whatever tomes mod is even out in 1.21?
the eff 6 and fortune 4 shit
you could add +1 level to some enchants in bmc4
like sharpness 6 and stuff
Quark is not out in 1.21 😄
Lol
oh is that so
Yes, many mods are not available yet in 1.21
ahh
i see
silly me
yeah also the waystone shit, we cant modify it for some reason
Updates should be backwards compatible
yeah unc is a little special
!updateserver for a guide
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
hi my game is really lagging in single player like im on a server anyone know a fix?
!fps
does somebody know how to unclaim area of a player when ur OP?
Doess better mc have any kind of skill tree, stats increase etc?
Does somebody know i can fix it?
my fps go down to 1fps and after it my game crash
No, this is a vanilla+ pack not an RPG
my villagers keep being able to sleep in beds they cant in the base game how?
What
i need to delete this mods?
Villagers can definitely sleep in beds in vanilla lol
No but you need to make a post in #1061339968691257466 if you modified the pack
And again, read what the screen says
not what i meant they can sleep in beds with a wall of trapdoors in betewn
it is really bad for villager breeders
Pretty sure that's normal, if they're close enough to the bed they'll get into it even if they can't technically reach it
If it's within like a block or two
you have 20 tps and your server is using 2gb of ram
nothing is wrong here lol
the pack comes with many pre-enabled
your world is safe
Please read the full contents of the #get-support channel for us to provide assistance.
please read the bright red text in your screenshot
would disabling them cause issues? i wanna have the normal look of vanilla
you can disable them yes
sure ig lol
how to open a backpack
press b
thank
my game keeps crashing the whole time can somebody help
my game crashes when i make a world
Ey guys wha host or mod should i use to play with friends+?
Uploaded latest_log.txt from @tiny glacier to mclogs: https://mclo.gs/qgmMYqg
Please read the full contents of the #get-support channel for us to provide assistance.
Please read the full contents of the #get-support channel for us to provide assistance.
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
please never suggest using Essential
Please read the full contents of the #get-support channel for us to provide assistance.
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
what
what is confusing you dude
idk what you mean w support channel
i cant even write there
do you know what the word "read" means
yes and it tells me question
it means to look at the text in #get-support and comprehend what it says & follow the directions
For help with your issues, please answer these questions and post your answers in the pack-specific channels:
do you plan on answering the questions
ye
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
curseforge - Have you changed the modpack in any way except mods?
no - v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
the game always crashes when making/joining a world - What steps cause the crash?
making/joining
latest.log | hs_err_pid41262.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
okay
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Run the
!alternatescommand in #bots and follow the directions. If you already have ATL installed, move on to step 3. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
i read the crash log thingy and it said smth w better stats now i deleted it and it still crashes
please
stop deleting things
.
nowhere in #get-support does it tell you to read the crash log
please follow the directions in the channel
no you didnt
you never posted the log
😭
please just read #get-support and follow the directions dude
???
oh
and you also did not answer the #get-support questions
please
read the channel and answer the questions
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
you mean this
?
Was it this hard to understand 😭
Uploaded crash-2025-04-13_13.06.45-client.txt from @tiny glacier to mclogs: https://mclo.gs/bG7xK4H
please answer the suppot questions from #get-support
Uploaded latest.log from @tiny glacier to mclogs: https://mclo.gs/1FjYWAa
💀
the one you copy and pasted here
and didnt answer
- 1.21.1, 2curseforge, 3. i removed youre in grave danger and added simple death chest, 4. i use 1.21.1 fabric, 5. it worked for like 3 hours than my game froze and i crashed and than it didnt work anymore 6. idk
you mean like that?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mSimpleDeathChest-1.3.jar[0m
Removed mods:
[2;31myoure-in-grave-danger-fabric-2.4.16.jar[0m
ur not even in the right channel lol
you are playing #better-mc-fabric
you are in the forge channel
hi, hope somebody can help me, installed better mc forge on modrinth and made some changes, added some mods and changed a few, but when i went to create a new world (in this case when i clicked in singleplayer since now minecraft automatically goes to the create world setting) the game crashes, first it gives a "preparing for world creation" message, then the music stops and switches to "saving world" and crashes, already update forge and search on the internet for similar problems, tested some solutions but to no avail
net.minecraft.ReportedException: mouseClicked event handler
crash log:
https://mclo.gs/zIo2E0h
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Modrinth - Have you changed the modpack in any way except mods?
No - v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
Always crashes - What steps cause the crash?
Trying to create a world/entering singleplayer
latest.log | debug.log head / tail (~30k lines) | crash-2025-04-13_15.33.01-client.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m42[0m added, [2;31m5[0m removed, [2;34m97[0m updated.
heres the screenshots of this ridiculous bug
le mod pack crash a cause de ça
!ca
And please keep the chat in english
is there a better MC wiki like Prominence 2
so in my very linited knowledge
dont update mods, idk why you also got rid of fabric api just to put a newer version in it, but thats also a problem, do a fresh install and if it still crashes resend your logs so someone can further assist you
also happening on bmc5 neoforge ...
also if it crashes again put it in #1061339968691257466 as
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
https://spark.lucko.me/V35uTmECov
graph? https://spark.lucko.me/BBFAcyIW21
i switched to Graal and used chunky on 5000 radius, my chunk loading is still rlly slow when using a dragon
any tips to fix this?
yo guys how to fix the "You have added a extra mod i the modpack", its my first time, please help
its very self explantory you added a mod into the modpack
if its telling you its not comtiabke read the full contents of #get-support to get assistance
compatiable
but i domt kmow wha tmod i added
bff idk either idk what your modlist looks like im not a wizard
alr, ty anyways
if its causing errors/crashes you can read #get-support and upload a log otherwise im not sure what you want us to do
What’s the mod that lets you turn on dark gui by pressing the little moon button
In this pack
what are the storage mods in better mc ?
Dk if there is more but I know Tom’s simple storage is in it
bmc5 has toms simple storage, bmc4 is simple storage network
is the chunky pre generation done or is it still ongoing
if its ongoing let it finish first and then continue playing
did it yesterday, tis done
before i hopped off today i expanded it by 50 blocks to see if it would do 5050, ig it's doing that now
when i tested the dragon chunky was off tho
then i dont know of much other than small improvements with java args etc ngl
Uploaded latest.log from @tired spruce to mclogs: https://mclo.gs/6DehjrP
read the contents of #get-support for assistance
- minecraft version - 1.20.1
- launcher - Prism launcher (MacOS)
- i had to manually add mods that were with wrong hash, through prism launcher and then everything matched
- v39
- the game launches, i tried creating a world and then after writting preparing for world creation, it crashes.
- creating a new world
Uploaded latest.log from @midnight halo to mclogs: https://mclo.gs/qA3lz4t
can someone help
Uploaded message.txt from @agile ginkgo to mclogs: https://mclo.gs/piTl5xU
i just installed the modpack and it crashes without me even doing anything
- 1.20.1
- ATlauncher
3.No - better mc 4 forge
- No
- Launching
Uploaded message.txt from @agile ginkgo to mclogs: https://mclo.gs/NF2hBZS
!drivers
You (likely) need to update your graphics drivers in order to resolve the crash. Here's how to go about doing that!
1. Identify your graphics card
if you already know skip to the next step
- Open task manager
- Navigate to the "Performance" tab (on Windows 11 this is the button that looks like a heart pulse)
- Press the GPU 0 graph and read your GPU from the top right
Note:
In some cases you may see a GPU 0 and GPU 1. This means your CPU has its own GPU, as well as a dedicated one. You probably want GPU 1 (which is usually the better one), but you can ask staff to clarify if necessary.
2. Download your drivers from the manufacturers site
Depending on what you read before, you likely need drivers from either AMD, Intel, or NVIDIA
AMD: https://www.amd.com/en/support
Intel: https://www.intel.com/content/www/us/en/download-center/home.html
NVIDIA: https://www.nvidia.com/Download/index.aspx?lang=en-us
Note:
- For NVIDIA you want to select "Game Ready Driver (GRD)" (this is the default option) for the best performance. Once installing you'd probably prefer downloading GeForce Experience, which will notify you when there's an available drivers update.
- For Intel, you probably want to press "Get Started" under the "Automatically update your drivers and software", which will simplify the process and update everything automatically
- For AMD you probably want to just press "Download Windows Drivers", which will download something called AMD Adrenaline, which will update your drivers automatically.
3. Run the installation, restart your computer, and try playing MC again
- At this point, hopefully your Minecraft is running. If it still does not work, please post any new logs and staff will help assist you with finding the right solution.
Also next time please follow crash assistant instructions, or at least paste an actual game log and not a launcher log
If I want to play on 1.21.1, should I transfer my "BMC4 MC [FORGE] - BMC4" world to a "Better MC [NEOFORGE] BMC5" instance or should I just wait.
You can't do that
Every version of this pack has very different mod lists, no worlds from one version are compatible with another
ok, so I should wait
Wait for what? It's never gonna be compatible
wait for BMC4 to be in 1.21
it wont
either start a new world in bmc5 or keep playing on 1.20
ok
does somebodody know how can i fix it . My fps drop to 1 and my game crash
read the red text
what i need to send to you?
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
do you not know how to read follow the instructions on the window you screenshotted and paste it into this channel
well not this channel theyre correct
in a thread in #1061339968691257466
When I try to add create mod to the modpack it crashes
Does anyone know how to fix this?
or what is incompatible
a. read #get-support b. go ask in #1061339968691257466 as
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
whats the best way to co-op without lags
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- Curseforge
- no
- v39
- once or twice it doesn't but vast majority of times it does just recently
- load up my world
latest.log | crash-2025-04-13_18.55.50-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32msmallships-forge-1.20.1-2.0.0-b1.4.jar[0m
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
yo does anyone know if you can get hearts back after losing them in mediumcore
ouu golden or enchanted apple awesome
i keep crashing upon first install and load
!ca
Better MC 4 - v39 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) A.) Curse Forge
- Have you changed the modpack in any way except mods? A.) No.
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash? A.) Crashes on boot
- What steps cause the crash? A.) Booting
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m13[0m added, [2;31m0[0m removed, [2;34m1[0m updated.
is it one of the added mods creating a disconnect or a diff or is it just something that i didnt order right?
Valkyrien skies is incompatible with most stuff, including lps packs
Same thing applies to Eureka
okay so delete those?
hi guys, off topic but i have a question, do you know what causes the ghostly form after death in Better Minecraft forge BMC4?
Yes, if you add incompatible mods - you need to delete them
well i understand that but are those the specific ones?
those could be the causes of your crashing yes
Okay, ill try that, thank you
if it still crashes you reupload the crash from that one just like you did before
I deleted them from the mod folder but i don't know how to remove from curseforge
That does delete them from curseforge
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- Curse Forge
- No
- v39
- Crash
- Booting
latest.log | crash-2025-04-13_14.27.32-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mCNB-1.20.1-1.5.8.jar[0m
[2;32mcreate-1.20.1-6.0.4.jar[0m
[2;32mEmerald_Armour_and_Tools_1.20.jar[0m
[2;32mfantasy_weapons-forge-0.3.1-1.20.1.jar[0m
[2;32mlegendarycreatures-1.20.1-1.0.15.jar[0m
[2;32mmcdw-9.0.4.jar[0m
[2;32mmo_creatures_reforge-1.0.0-forgepoodle-1.20.1.jar[0m
[2;32mrefurbished_furniture-forge-1.20.1-1.0.12.jar[0m
[2;32msophisticatedbackpacks-1.20.1-3.23.10.1220.jar[0m
[2;32msophisticatedcore-1.20.1-1.2.42.943.jar[0m
[2;32mvanillaplustools-1.20-1.0.4.jar[0m
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
is there a way to put the better minecraft with the ice and fire modpack? together in forge, i've being trying but i just cant
you cannot combine modpacks no
im trying to host for one of my friends, but everytime he tries to connect it says "an error has occured in Luna" on my end in game, and for him it has him encrypting infinitely and then he fails to connect. Is it simply bad connection or did I set something up wrong? He was able to join yesterday but all day its been no luck. weve even both restarted our games and PC's
!wsfull could be
World Sharing servers are currently at capacity
If you're receiving the error "Connection refused: no further information" when trying to join a friend through "Start Co-op" or "Host World", it's likely that Luna's servers (used for world sharing) are currently full. We don't have a way to notify you when slots on our servers free up, but you are welcome to try again later.
We understand and recognise that this may be inconvenient, so we recommend in this case to host or rent your own server. For more information on hosting options, type !server.
oh, sick
but another friend did manage to join, although I believe his was LAN as were in the same house
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
ty
can someone help me?
read the red text and follow the instructions
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Curse Forge ( Minecraft Launcher ) - Have you changed the modpack in any way except mods?
NO - v39
Yes - Have you ever gotten past the crash condition without crashing, or does the game always crash?
It always crashes after joining the game - What steps cause the crash?
latest.log | crash-2025-04-13_17.18.47-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
booting
Mod list changes beyond the modpack:
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
Better MC 3 - v28 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) - CurseForge
- Have you changed the modpack in any way except mods? - No
- v28
- Have you ever gotten past the crash condition without crashing, or does the game always crash? - No
- What steps cause the crash?
latest.log | crash-2025-04-13_13.25.40-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;34mMod list wasn't modified.[0m
- tried to transfer world from BMC1 1.19.2 to 1.21.1 version
- Always crashes as soon as I try to get into the world
Oh, that's not going to work
How so?
you can't transfer worlds across modpack versions, dif mod lists
also you are playing on fabric, this is the forge channel
the BMC1 has a "update to 1.21.1" then it navigated me to the new version, i assumed it was possible. 😭
why cant i join my friend ingame with the free hosting feature??
it always says failed to connect
From technical point of view - 1.19.2 and the 1.21.1 versions are different modpacks, that just share name
!wsfull likely
World Sharing servers are currently at capacity
If you're receiving the error "Connection refused: no further information" when trying to join a friend through "Start Co-op" or "Host World", it's likely that Luna's servers (used for world sharing) are currently full. We don't have a way to notify you when slots on our servers free up, but you are welcome to try again later.
We understand and recognise that this may be inconvenient, so we recommend in this case to host or rent your own server. For more information on hosting options, type !server.
Where do you see a button like that?
Top left corner on home screen
!wsfull likely
World Sharing servers are currently at capacity
If you're receiving the error "Connection refused: no further information" when trying to join a friend through "Start Co-op" or "Host World", it's likely that Luna's servers (used for world sharing) are currently full. We don't have a way to notify you when slots on our servers free up, but you are welcome to try again later.
We understand and recognise that this may be inconvenient, so we recommend in this case to host or rent your own server. For more information on hosting options, type !server.
running the command again does nothing just read it 😭
did you move around any servers on your server list?
Hey I need help I just started to rent a server on Bisect and I'm struggling to transfer my single player world to the server I think the issue might be that my single player world was BMC 5. Version 24 and on bisect I can only install version 27 of BMC5 can anybody help me?
!server read one of the lower paragraphs
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
Okay but does this work even through different modpack versions because I think I already did it as you just recommended
Is there maybe a way to install v 24 on the server
?
I walked into the center and all around the platinum dungeon, no boss spawned, clicking the songstone just says smth abt nothing responding. How do I get the boss to spawn?
modpack version doesn't matter
hey guys, i need help, it keeps saying that my login failed
im pretty sure that im using the right email
Break the songstone
I don't think we can help with login issues really. The only thing I can recommend is trying on a different launcher maybe?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Im trying to create a new world in BMC5 and i keep getting this
alr, thank you!
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
Hey I need help I just started to rent a server on Bisect and I'm struggling to transfer my single player world to the server I think the issue might be that my single player world was BMC 5. Version 24 and on bisect I can only install version 27 of BMC5 can anybody help me?
you already asked the question earlier, chloe comes in and backreads and responds to everything when she can if no one else is able to provide assistance in the time being, no need to repeat yourself
Should work fine. Tell us what the problem is, instead of assuming it's related to a modpack version
17 is a child?????
Please excuse me I just wanted to point out that her suggestion didn't help me because I already did it that way. And it kind of works because I'm spawning at the same location as I logged out of my single player world and the world generated the same way but any changes like a a build base or something did not transfer
So it is the same world but naked
.
Try to transfer it again. Make sure the server is stopped while doing so, and that you transfer the correct save, and all the files (sometimes file transfers face some issues)
If you get any disconnect or error during transfer, then sometimes even a "resume" function doesn't work correctly
Okay, I already did it three times the file transfer didn't seem to have any issues even if I ran through all the data that should be transferred. I couldn't notice anything missing except the logs for example
And I also asked Chat gpT about it and I was impressed about die tilt knowledge off his even in such specific Situation and it told me that it could be caused due to the different different modpack versions. Do you know how I can install version 24 instead of version 27?
how do i get the armor percentage to show again? after the last update the hud changed and removed the armor health %
is there a mod i can add?
if your armor is not at 100% it'll pop up by your inv
all i see is the health bar but it used to show me the %
yes because the hud mod used got replaced
same with weapons/ tools
you can attempt swapping out immersive armor hud for inventory hud+ ( the old hud mod) if you perfer but i'm not sure if it would cause issues or anything so try at your own risk
thanks, i'll click around
I never had any issues with HUD+ and I add it to many modpacks I play. YMMV
Better MC 5 - v27 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- CurseForge
- Have you changed the modpack in any way except mods?
- v27
- Have you ever gotten past the crash condition without crashing, or does the game always crash? -crashes upon launch
- What steps cause the crash? - launching the game
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m38[0m added, [2;31m1[0m removed, [2;34m12[0m updated.
Will changing the server properties of a self hosted server be updated when you relaunch the server?
reinstall the pack, updating mods can break custom config settings and can cause compatibility issues, can also introduce new issues
if it still crashes resend the crash logs from that in #1061339968691257466 as its a modified pack and this channel is for non-modified assistance for the pack
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
Hello!
everytime my friend and i try to load into our new server it says no connection?
any help?
are you using worldsharing,self host, or a third party host
i have zero clue, my friend said biosect hosting?
btw i managed to do it you need to zip the world folder before transfering
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
bisect hositng is a third party host yes, in that case, send the latest.log from bisects log folder and answer the questions in #get-support that can pertain to the server (like what version of bmc youre running, what launcher/s you and your friend are using because it can affect it as well)
yes as syntheer said
we're gonna just cancel our server. thanks anyway!!!
any way for me to rebind the shift right mouse button where it picks something up?
i promise u dont need to cancel is bisect is highly recommended 😭
we have no clue what we are doing lol
i get it seems easy but if u get someone who knows what theyre doing to help it can be easy too
#get-support is only information channel, nobody can type there
It shows you how to provide information, but you do all of that here
theres a button that says "support questions" hit it, and answe the questions and follow the logs command syntheer ran
yes
And in terms of BisectHosting - you might want to open a ticket to their customer support, they might be able to fix it
didnt suggest it off the bat in case it was a playerside issue
yeah you can def open a customer support ticket with bisect
2 questions
- What's the optimal level for mining diamonds? I'm finding NOTHING.😭
- Where do my dragons go? I set them to hatch, and eventually I check on the egg, and it's gone. The eggs were closed off and I have no clue because there is not a dragon nor egg.
what mod is the "right click to equip"?
i need to tame a sculk snapper but i cant cz it just puts the chestplate on instead
You mean when you're holding it in your hand and right clicking?
Cuz that's a vanilla feature
remove betterfpsdist
remove memoryleakfix
remove sereneseasonsfix
remove redirector
remove Tips
please stop adding things if you dont know what they do
why did you even remove these 😭
im just gonna assume your install is broken
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
no, read the questbook ingame
!pregen
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬...
So im trying to get me self hosted server started but I'm not sure its actually finsihing. It basically stops at this but will occasionally do the "saving data for 0 chunks". Im unsure if the server overload part has anything to do with it
what
Please read the full contents of the #get-support channel for us to provide assistance.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
idk if it's a me problem or what, but certain mobs like skelewags, naga (mowzie's mobs), and others just don't spawn
I know naga spawn rates got giga nerfed a while back because they were spawning way too frequently before, idk what the case is now
i've checked about 50 shipwrecks by now and haven't seen a single skelewag
Maybe they're blacklisted idk
Haven't played BMC in a bit so idr how some things are set
nerfed to extinction 🥀
alright ive tried everything im completely lost. I have horrible tick and its making my bettermc server lag. I can not figure it out. Any help?
it's likely not meant to show in the pack?
how is server hosted
bisecthosting
Preinstall, or manual?
pre
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
should i reset the server once changed?
yeah just restart
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Prism - Have you changed the modpack in any way except mods?
I don't know, I'm just trying to play on a friend's server - v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
Seems random - What steps cause the crash?
Seems to be caused by changing settings or joining a server
latest.log | debug.log head / tail (~37k lines) | hs_err_pid16804.log | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m13[0m added, [2;31m0[0m removed, [2;34m1[0m updated.
imo it's better to make changes with server stopped to be safe
oh-
how much ram you have allocated?
6074
how much does pc have
weirdly i had the default at 4k and it didn't crash before but changed it since i was directed to
like 12 or 16k lemme check rq
looks like 16 gigs
yeah
!openjdk
If the issue you're experiencing is clientside, and is not related to a server, then follow the "Java" section in our performance guide for how to switch to a newer, more stable version of Java.
If the issue you're experiencing is serverside, then follow the Java section of our server installation guide.
Does anyone know about this? 😭
where did you download serverpack from
cursedforge
app or site
app
download from curse's website try again
Better MC 4 - v39 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
wait whats the differnce lmao, just curious
thank you
the app has serious issues breaking crap, plus it's a resource hog so we don't suggest it for server or player side
Ill give it a try
curseforge, no, v39, yes i have, and im not sure
!paging
How To View Paging File Size
Before anything else screenshot how much disk space each of your drives have and post it as it might be caused by low disk space.
From the Windows search button search up "Advanced System Settings" and open the first result.
Press the "Settings" button located under the Performance section.
In the new section that has opened press "Advanced" and after press the "Change" button located under the "Virtual Memory" section.
After locating it screenshot the resulting page and post it.
so i changed it
my server is 1.20.1
and it says its incompatible after going to 1.22
i think i fixed it
Same thing happened
bmc isn't on 1.22, and you can't change it youself
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
can someone help me figure out why my better mc keeps crashing as soon as i click t load into it
what about chunks taking forever 2 load should i preload the server while ppl r offline?
and it says error 1
yes do it when players aren't on
!pregen
Noob explains how to Pre Generate your Minecraft World.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➔ Modpack: https://www.curseforge.com/minecraft/modpacks/better-minecraft-modpack
➔ Discord: https://discord.com/invite/9S5tfrY4Fr
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬...
Uploaded latest.log from @formal egret to mclogs: https://mclo.gs/P8zerLl
follow the white pop up that shows when it crashes
i saw that video thank you will do
remove smallships
corpse probably
remove mcdw
the mod you added
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
everything was good but as soon as all my friends got on ticks became horrible does that have 2 do with world not being preloaded
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
@sharp anvil requested deletion of this link.
BMC5
The game crashed: unexpected error
Error: java.lang.NullPointerException: Cannot invoke "dmr.DragonMounts.server.entity.DMRDragonEntity.setPos(double, double, double)" because "newDragon" is null
Any time i call a dragon with the whistle
this is happening after updating to Version 27
fatty
Better MC 5 - v27 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (CurseForge)
- Have you changed the modpack in any way except mods? (Voice Chat)
- v27
- Have you ever gotten past the crash condition without crashing, or does the game always crash? (Always crashes)
- What steps cause the crash? (Specifically calling "End Dragon" from far away with the whistle)
latest.log | debug.log | crash-2025-04-13_17.37.18-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mvoicechat-neoforge-1.21.1-2.5.28.jar[0m
was anyone able to figure out what my issue was?
Me and my friends just got a better mc 4 server on bisect. For some reason no one is able to join and we cant figure out why. Can anyone help?
Dragons are duplicating also
I am also running it with better mc 4 forge.
Please read the full contents of the #get-support channel for us to provide assistance.
So weird that dragons duplicate when using waystones
fixed by duplicating the profile
and crashes only when calling the "End Dragon" with the whistle.
has anybody been at the brass dungeon in the aether
maybe consider reading the #get-support channel
youre not gonna get assistance unless questions are answered
I am on version 1.20.1, curseforge, havent changed the modpack, and nobody can join the bisect server. I dont know why this is happening can anyone help.
you might have success contacting bisect support about it
then perish ig ur not gonna get help otherwise
Have you tried reading what it says?
well no its nobodys duty but my best advice is literally just to relaunch your session
if it doesnt work use a dif launcher
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
what on actual earth
are you okay at home
i feel bad for ur son
well its nobodys duty but i did in fact give u the best advice i knew
trolling will just get u banned
least aggravating rage baiter
Hey @viral garden , i'm sorry to bother you,
just logged on and it was night and nothing was spawning still and i checked the spark profiler and its still saying there is a lot of slimes., and when i try to /kill @e[type=minecraft:slime,] it says no entity was found
follow the instructions to try on atlauncher
idk man curseforge can fuck up stuff which is why i said you might want to try atlauncher
the launcher ya a bit
yo my friend is tryna play it then it crashes as its loading and it says something like this
can you read the like
red text
its my problem i would be willing to hop in call to figure it out
omni this is very hysterical behavior from someone crashing out over something extremely similar
what os r u
no it isnt
sorry
also
update to v39
might fix ur crash issue without extra effort
windows 11
preach king
rules you apparently havent bothered to read
ram?
mmm idk ill just go play something els >: (
lmao
Does anyone know how I can download all the folders of the better mc mods? 
whhy you need this
and, launcher?
@lean oasis
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Better MC 4 - v39 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) Cursrforge.
- Have you changed the modpack in any way except mods? No.
- v39
- Have you ever gotten past the crash condition without crashing, or does the game always crash? Always crashes.
- What steps cause the crash?
latest.log | hs_err_pid45971.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Updated mods:
[2;34mstoragenetwork[0m ([2;31m1.12.2[0m > [2;32m1.11.3[0m)
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Run the
!alternatescommand in #bots and follow the directions. If you already have ATL installed, move on to step 3. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
Thanks!
It's because I can't download the mods through the curse forge program... I have to download it from the website, but I download the modpack from the website, there is no mod to be able to extract it in .minecraft... I'm just a Brazilian asking you for help XD
If I don't have a solution to achieve this, I just sit and cry...
what launcher are you using?
you need a modded launcher to run packs. don't use the vanilla one
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Also idk if it’s possible that spark profiler is misreading or maybe I’m misreading… but still not getting hostile mobs to spawn (passive are tho!)
anyone know how to unclaim a dragon
so on that pregen server video. The mod only has 1.20-1.20.2
no 1.20.1
i downloaded 1.20 and the cmds arnt working in game
which file should i download for a 1.20.1 server?
figured it out
Been trying to use the Patrix resource pack in Better MC v39, and all is well except these misaligned textures on animals. Tried looking through the Entity Texture Features mod options but nothing seems to fix this. Anyone know how to fix this?
oh that’s kinda funny 🤭
bruh pregen cmd still doesnt work in game
chunks just like never load and u gotta sit and wait while all the chunks load.
Anyone have a better idea
I know this is the second time I've asked, but I'm genuinely don't know what to do for this. Did the code help at all?
please stop adding mods if you dont know what they do
you added so many things that already have better alternatives in the modpack
remove lambdynamiclights
remove letmedespawn
remove moreculling
remove no-telemetry
remove not enough crashes
especially remove saturn
remove REI
readd accessories_cclayer-9.3.1-beta.26+1.21.1-neoforge.jar
you also both dynamic-fps and fpsreducer2
which both do the exact same thing
your server is already online
nagas are disabled
skelewags are unaffected
Is it? I couldn't access it when I tried getting into it
did you think about the mental health of the people that you are asking help from when you added 70 mods
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Please read the full contents of the #get-support channel for us to provide assistance.
Please read the full contents of the #get-support channel for us to provide assistance.
update the dragon mounts mod to this version https://www.curseforge.com/minecraft/mc-mods/dmr/files/6419710
please give more information
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
yea I can't connect to the server using the IP I gave it in the properties. I'm on using the forge it gave me in the server folder. Would I need a launcher or something. Sorry, I don't actually know what the launchers are for
i was asking bc i couldnt find it lol
then ask where it is....
Reason: being weird to @sweet spade lol
Moderator: @viral garden


finchilton [178570839275339785]
#chloe4president
can you send a new spark profiler?
what shall their son ever do
Of course!
😢
are you playing on a server?
update
disable the stay true resourcepack
how is it so hard to read 💀
wym man
@viral garden https://spark.lucko.me/8A8pw9NSRx, and here's also what happens when i try to kill type=minecraft;slime
spark is a performance profiler for Minecraft clients, servers, and proxies.
with this small of a brain
just tell me what u mean instead of saying stuff
read what you sent
ok I don't think there is a need to escalate this
just let people ask questions and get answers
he'll play the worlds smallest violin clearly
can u just tell me how to fix it and if it is just updating it what am i updating
no
like i said an hour ago
if you cant read
what command are you running?
what are you typing to join your server
dont set your ip in server.properties please
u rlly need to read the entire ui
Oh, sorry
lmfao
read the text in the screenshot you posted
Well that what was I was typing to get in
!server the guide goes over on how to join
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
The following advice works for both the Free and Paid methods:
Transferring Your World
If you're playing Singleplayer and want to transfer your world to your server, simply go to your modpack files and navigate to the saves folder. Inside of this folder, you will see your world saves. Rename your desired world save to world. You can then transfer this folder to your server files. If your world was hosted via world sharing, this process has to be done by the person who would click "Share World".
Fixing Lag
To resolve lag issues, simply run the !tps command in #bots and follow the directions provided.
i might of figured it out 1 sec
for the low price of $999.99 (plus shipping and tarrifs and tax) an hour chloe will unban and provide 24/7 support to them and their son
too cheap of a price
^
oh sorry i missed a 9
dont include shipping in the tax
./kill @e[type=minecraft:slime,]
Yeah I did that :/
shipping is an extra 100 dollars
That’s what’s saying no entity found which is why I’m so confused 💔
that copy paste
Let’s try it
i added the tarrifs charge too
Would I have to make another world with the IP part blank then?
you should be fine just removing the ip part in server.properties
@prime furnace I’ve been trying this exactly unfortunately
thanks for the quick response, you're on fire <3 unfortunately disabling stay true (and 'stay clear' just in case) didn't seem to help :(
the resourcepack you're using is likely just broken
In case it got lost
i use a dif resource pack w stay true disabled that changes animals on v39 just fine just for some extra info it may be the pack itself
Idk if I’m doing something wrong bc it worked the first time (killing the slime) but it seemed to kill them and not change anything in spark profiler, and now when I try it says no entity found. Unless it’s reading something else as slime?
can you change your pfp?
@viral garden alright so i got the cmd to finally work /pregen start gen worldborder 1 minecraft:overworld FAST_CHECK_GEN
but i got this
profile picture
what modpack version?
question so i aint gotta do the math about how many blocks is 500 chunks
instead of 20k i do ???
your quite literal pornographic profile pic
49 million or so
Reason: porn pic, refused to change pfp
Moderator: @atomic narwhal


anatak [239273191325827072]
I HOPE 2 god this fixes the chunks taking 12 years 2 load
what an interesting fellow
^
heaven forbid they depart with their funky ass pfp
cant u like make ur pfp different on each server?
damn i missed a porn pic
Only with nitro
hazel it wasnt worth seeing
$10 nitro feature


