#better-mc-forge
1 messages · Page 389 of 1
😭
lmao
Im tryna find suspicious sand so i can fight the desert boss but i cant find it anywhere
Is there somewhere specific I should be looking for it?
spawn dat sand in boa
its at the top of the structure
which structure?
the place where the desert boss is
Oh well then ig ill have to find him first
I thought i needed the Necklace to find him?
you need it to summon him
you need
eye of desert
2 is enough to find him
@viral garden is there anyway to copy and paste and building from bmc5 to another mod pack?
forgematica
does not work for me
Istg im so stupid spent like 4 hours yesterday
you'd need to find the corresponding region file
then transfer that ig
try with mcaselector
the program
lmao, ender eyes are really useful theyre used to find any cataclysm boss
im pretty sure
@chloe is it normal for the server to take a while to start?
been here a while lol
Im gonna do eveeything you say and by the book to ensure this runs good
your server is started
well your server is up
anyone on your local network can join by typing in localhost into direct connect
for others to join, just make sure you've portforwarded and then give them your public ip address
!port
If you're having issues with your friends joining your server, your port for Minecraft may be closed.
-
Check with https://portchecker.co/ with your IP and Minecraft's port (drop down menu) to see if it's open.
-
If it's closed you will need to search online "How to open Minecraft port for server with (ISP Name)
Important note: a lot will allow port forwarding, but there may be some ISPs that will not allow any port forwarding. Please check online if this is the case for yours.
would it be reliable for them use a vpn?
like radmin
bc portfowarding is a lil intimiadating ngl
would they need to port forward?
and how do you start minecraft and join my server?
youd need to port forward
not the people joinnf
nice
!port we have this to check if your porta are opened
If you're having issues with your friends joining your server, your port for Minecraft may be closed.
-
Check with https://portchecker.co/ with your IP and Minecraft's port (drop down menu) to see if it's open.
-
If it's closed you will need to search online "How to open Minecraft port for server with (ISP Name)
Important note: a lot will allow port forwarding, but there may be some ISPs that will not allow any port forwarding. Please check online if this is the case for yours.
but it differs based on isps
what port do i forward?
guys i have a problem. Hostile mobs are just not spawning in my world. does anyone know a way that can help me fix this. thanks
what modpack?
& modpack version
bmc 4 forge v37
there is no hsotile mobs the mobcap isnt full and in other worlds they spawn
forgot to mention i probabalt cant port foward due to not having a router
my apartment complez just supplies internet
i think i have to use radmin. once everyone is on my local connection how do we all go about joining
such as how do i start mc
through an insatnce?
what info do i need to port foward
im otp w them rn
port fowarding is not allowed
so i have to use radmin
i also cleared space on my drive
i got cobblemon to work fine on singleplayer but when i try to add it to my server i get this error
anyway to fix?
Better MC forge needs more farming. Like adding Farmer's Delight Additions and Croptopia
I already ran out of new things to grow
Both work with the other things in the modpack.
For BMC4 at least
Same issue, have you found a fix?
@chloe @mimi simmilar results hosting own server
i messed the @'s up wtv
i also dont have my map loaded as well as have admin permissions
So i'm having a random crash upon startup for no reason with a complete fresh install of BMC4
hoenstly i think the server does run a little better frame rate wise, i cleared space on my harddrive, i think im running the correct java, Ijust need to have admin permisions now as i did on the instance @viral garden
found the issue is with graalvm, will there be any issues if i use java21?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
i appreciate all this btw
if you press the xaero minimap config keybind you can transfer waypoints im pretty sure
and you need to type op usernamehere in console to op yourself
Please read the full contents of the #get-support channel for us to provide assistance.
just worse performance
it seems to juat be in the base in the open world i get 400+ just drops to 50 at base
ty
can you send a new client profiler
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
the server window is your console
no, theres no reason to have both
it uses one or the other i dont remember
@viral garden https://spark.lucko.me/Bm1yuTrgtT
can you try removing the "lazyyyy" mod
anyone got issues with fire dragon not burning mobs?
wdym
it just put the fire effect on them and it flickers
which modpack?
this one
bmc5
thx
Figured it out, It was a graphics card issue
if it doesnt you're free to switch back to what you were doing before
as the issue has now been found
thank you for your cooperation, update will be out soon to fix probably
https://spark.lucko.me/luetugtxpc this looks good now?
yeah
no thank YOU
🤝
maybe remove lazzy next update lol
Hi, i'm running a BMC4 server and hostile mobs aren't spawning at night. any suggestions how to fix?
im talking to the dev to resolve it
can you send your latest.log?
and are you on v37?
yes
ONE last thing
is there any way i an get my map from my instance
like the loaded map
or does that work w like loaded chunks or something
4239 lines | 825 errors
wdym? do you mean transfer your world map to your new server or
alright thanks, ill look into this soon and try to get a fix out
thank u, if there's anything i should try let me know.
Maybe worth adding, they were spawning in structures ie mine & some tower thing with armored zombies
Uploaded latest.log from @flint cosmos to mclogs: https://mclo.gs/nRPCEqD
my game keeps crashing when I try to load up world
and cant find my crash log
but there is latest log
im on 1.20.1 curseforge v 37
yes you will need to rename a certain folder
go to instance folder > xaeroworldmap and there should a folder with the name of the world you used to use
if its a singleplayer
screenshot the xaeroworldmap folder and send it here
if you open your waypoint manager theres a button to transfer waypoints
what mimi said will also work perfectly fine
bro
i spent like an hour learning this
lmao
i wish i asked her einstead
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
i cant figure this out
it'd be better to do what mimi said then
also check your dms for testing a fix for the lazyyy mod
Hi, server files for BMC5 v24 -
#announcements message
are missing from curseforge, am I missing something obvious?
i'm going to try reinstalling the server, see if that helps
will fix in a sec
thanks
Thank you ❤️
idk why its doing that
go one folder back and screenshot again
you are connecting with localhost right
if so rename hoodness to Multiplayer_localhost and rename the old localhost one to something else
or just move it out the folder
unfortuently that did nothing
wait
i think i did it wrong
my server folder does not have that xaero folder
try renaming it to that weird long thingy as well and make them both renamed
i did what you said in insatnces though
can you rescreenshot the world map folder
click on the server in the multiplayer menu
press edit
it should show you the ip
its lan
like the lan thing that appears at the bottom of the multiplayer menu
doesnt let me edit
try joining it
walk around for a bit and then refresh the world map folder
and see which folder is the newly generated one
the one w the long name has a null folder which was updated most recently
which was orginally hoodness
that should have been it idk why its not working
sad
i just have a farm in the end which i used to teleport too lol
i just booted up the insance again
my map was still there but it made a new hoodness folder
Hey I need help because I don’t understand at all and I am new to mods and I don’t know how to do it. These are the messages I got when my game crashed and I think I filled it out
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- CurseForge
- no
- v37
- I haven’t play yet the game always crash
- When I want create a world
latest.log | hs_err_pid88330.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
these people WILL fix your problem @supple wharf
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
can you screen everything that starts with a x in the instance foler
see the problem with this is when i do it crashes my game
and its lagging for literally everyone
and its not the server because i played the same world on a single player and it lagged before moving it to server and its the same thing on the server and its not that the server is experiencing low tps because chunks are loading instantly with 3 people loading new chunks at once
so its not the server or anyones client
so it must be the modpack
for me it was the lazzyy mod
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-03-23_15.53.51-client.txt | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Added mods:
[2;32mbiosphericalexpansion-1.20.x-2.1.1.jar[0m
[2;32mdungeons-and-taverns-3.0.3 [Forge].jar[0m
[2;32mecosphericalexpansion-1.20.x-2.4.6.jar[0m
[2;32mgravestone-forge-1.20.1-1.0.24.jar[0m
[2;32mironchest-1.20.1-14.4.4.jar[0m
[2;32mlootr-forge-1.20-0.7.35.91.jar[0m
[2;32mluki-s-grand-capitals-0.7-forge-1.19-1.20.1.jar[0m
[2;32mMysticalAgradditions-1.20.1-7.0.6.jar[0m
[2;32mMysticalAgriculture-1.20.1-7.0.16.jar[0m
[2;32mnetherdepthsupgrade-3.1.5-1.20.jar[0m
[2;32mtrimeffects-forge-1.20.X-2.0.0.jar[0m
Removed mods:
[2;31mParticle Effects-1.0.2+1.20.1.jar[0m
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- Curseforge
- No
- v37
- Yes
- Logging to my server (Other players are connected with no problem)
latest.log | crash-2025-03-23_16.44.37-client.txt | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Hi, I have a problem that I don't get monsters, although I have them set to hard, what should I do?
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log head / tail (~41k lines) | crash-2025-03-23_11.50.14-client.txt | atlauncher.log | crash_assistant_app.log | win_event1742745018192.txt
Mod list changes beyond the modpack:
Added mods:
[2;32melenaidodge2-1.1.jar[0m
[2;32mfeathers-1.1.jar[0m
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
[2;31mimmersivetips-forge-1.0.0-1.20.1.jar[0m
[2;31mlazyyyyy-lexforge-core-0.8.6.jar[0m
oh no
Hi, I have a problem that I don't get monsters, although I have them set to hard, what should I do?
does updating delete the mods i added/
i assume ur talking mob farms i might be cuz u didnt do high enough and the mobs are spawning in caves below you
No, the point is that I created the world and there are practically no mobs in the world
At night
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- curseforge
- only added mods and disabled some
- v37
- i have not gotten past the crash condition at all
- the step that crashes is loading tyhe mods on the red screen that shows your ram bar on it
latest.log | crash-2025-03-23_10.14.46-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m9[0m added, [2;31m22[0m removed, [2;34m11[0m updated.
this is an issue with the feathers mod
Mod ID: 'cucumber', Requested by: 'mysticalagriculture', Expected range: '[7.0.5,)
try adding this cucumber mod
you should never be updating all mods in the pack like this. but the issue is likely with the lazyyy update
and for further crashes make a post in #1061339968691257466
lazy for some reason obscures every crash report
and hides the real crash
like that bclib modelbaking thingy
supermartijn642configlib', Requested by: 'betterarcheology', Expected range: '[1.1.8,)',
am i stupid for not knowing what this means?
is that client side? im trying to play on my friends server?
iirc yes but im not sure
it worked! TYSM mimi ❤️
is there a way to fly?
hey guys, is there a way to take enchants off weapons and put them on books?
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- CurseForge
- No
- v37
- It always crashes
- Load in the game, create a world, crashes upon loading into the world
latest.log | hs_err_pid2652.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
hey guys, is there a way to take enchants off weapons and put them on books?
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? -Curse forge
- Have you changed the modpack in any way except mods? -no
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? - Crashes once the game gets to "Loading mods"
- What steps cause the crash? -I'm not sure and all I get is "Crashed loading particles"
latest.log | crash-2025-03-23_12.37.08-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m39[0m added, [2;31m0[0m removed, [2;34m1[0m updated.
sorry I'm not used to help forums 😂
Have the same issue. Just after updating too and even on a new world. No mobs at night. Anyone else?
i did the same thing 3 minutes ago xD
remove particle effects mod
and for further crashes make a post in #1061339968691257466
could you test something for me
deactivate the shaders you are using and retry entering the world
and if it boots up ping me
hey guys, is there a way to take enchants off weapons and put them on books?
Is there a way to open ATLauncher as an admin on mac?
isnt atlauncher like FULL of malware?
tlauncher is the cracked one
ah yup
idrk sorry
dont use mac
hey guys, is there a way to take enchants off weapons and put them on books? I've got the worlds best stone sword and want to transfer the enchants xD
try prism launcher see if that fixes
fair xd
didnt work, ty for the support though ^^
@viral garden really helped earlier and she was able to diagnose a problem with this link.
https://spark.lucko.me/I2rx9x3NRN This is my friends game. I already disabled lazzyy but i just wanted to know if you guys noticed anything
game is still running subpar
what to do when u have mouseClicked event handler
can I made server on better mc for free ?
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Hi I had the same problem on my server. I had mobs only spawn in structures but not at night. Had to start a new world.
Luckily I only played for 1 hour
did makign a new world fix it
Yes. I created a new world and tested it by setting it to night
@near egret Anything noticable? deleting lazzyy on my world did insane numbers for my fps
this is my friends world though
link*
on the same server
hey guys, is there a way to take enchants off weapons and put them on books? I've got the worlds best stone sword and want to transfer the enchants xD
dub thanks
it looks to be the at 20 tps constantly
damn i got lied to 😦
thats a good thing
20 tps is the most you can get
i cant see low performance on the profiler
most of the resources are idle
mhm
on bmc4 it works put the sword first then the book
so what should this guy do
you guys literally saved my game
i just did it
made a new anvil and everything, doesnt work on v36
how do i get nether ruby upgrade templates
@near egret thisis both the spark and sparkc ones
w netherite smithing template
look it up in the search bar on the right
type in smithing template and they all pop up
yeah but it just shows me the recipe where i need one to duplicate it
it doesnt show me how or where to get it
send the full log
meanwhile answer these questions
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Uploaded latest.log from @gritty carbon to mclogs: https://mclo.gs/9QbquK6
1.21.1, CraftyController, No, BMC5, I haven't gotten the pack to load on server without crashing, and I just launched a server
your minecraft version on the server seems ro be 1.21.4
change that
click on versions
click on the version you want the serverpack for
click on additional files
click versions on the modpacks curseforge page
forgot to say that
I can't find the neoforge 1.21.1 installer. The other versions link goes to github, and the download links there just send me back to the start
If you are unable to find the serverpack on Curseforge, it is most likely not approved by Curseforge yet. If you want to create your own Server Pack follow the steps below;
How to create a Server Pack:
- Download ServerPackCreator and run it.
- Set the Modpack Directory to where you installed the modpack.
- Set the Minecraft Version, Modloader and Modloader Version of the Modpack.
- Press Generate.
How to use the Server Pack:
- Right click the start.ps1 file and click Run with Powershell.
- To join your own server, type localhost into Direct Connect.
This video explains the process https://youtu.be/tLTC6wYcWVM
The server IP address is your Public IP Address, which can be found by googling "my ip address".
If other players are unable to join, find a portforwarding guide online.
probably not approved yet
is it normal for the game to crash alot in the tundra biome?
1.21.4 wont work sadly
all the mods in are for 1.21.1
ill try ro find a link for 1.21.1
that... doesn't help me find the 1.21.1 installer
hello ! is there no way to get Icarus mod to work with better mc forge 1.20.1 ?
what happens when you try to add it
does it crash?
yes the gui crash pops up
press upload all and copy
Alright if you’re having issues making a server with this mod pack and get an error code saying you can’t login. Try deleting Krypton Reforged.
It causes a lot of issues with servers
I changed the version and it's still not working
Uploaded 2025-03-23-2.log from @gritty carbon to mclogs: https://mclo.gs/Y6kKyly
I can't find create 5.2 anymore to get it with the mod pack
Did it got fixed and we can get an other version now ?
0.5.1j
is the version thats latest before 0.6
you dont have connector but have forgified fabric api
where did you get the mods from
https://www.curseforge.com/minecraft/modpacks/better-mc-neoforge-bmc5 server pack download
please someone tell me how can i find village man im desperate 😭 🙏 all that running and still nothin
i got it to work there was a Dependency mod that the Modrinth didn't list tysm !
@mimi anything you notice my friend can do to get better frames.
try waiting for a serverpack for the latest version or create one yourself and try that
Is there a detailed changelog for V37, I wanna know which exact mods were updated
Hi, I seem to be having an issue with Friends&Foes (friendsandfoes), I've checked previous messages in this server but can't find a reply that fixes the problem:
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
1.20.1 - What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Curse Forge - Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
No, fresh install - What version of the modpack are you using? (v11, v9, etc)
v37 - Have you ever gotten past the crash condition without crashing, or does the game always crash?
Always crashes, this is a fresh install - What steps cause the crash?
Crashes on server boot
pain.
can you send in your latest. log
1732 lines | 262 errors | 1 problem automatically detected
Didnt fix anything at all
I'm getting this error on loop when the server starts
Apparently we can use the latest version of create since the update of the mod pack
oh thats good to know
i thought it was still incompatible
But is that normal that we lost the mod that allows to sort items
My server keeps crashing with this log
Uploaded crash-2025-03-23_14.11.48-server.txt from @gritty carbon to mclogs: https://mclo.gs/DUaDSdt
hi, how to hatch a dragon egg ?
Can someone help? My server keeps crashing with this error
Uploaded crash-2025-03-23_14.26.17-server.txt from @gritty carbon to mclogs: https://mclo.gs/umkiUHx
send your latest.log from the servers log folder
anyone have any ideas? I've tried re-installing the mod but get the same error
Is it known that the snow queen trophy shows up for the yeti boss, instead of the yeti trophy showing?
Uploaded latest.log from @gritty carbon to mclogs: https://mclo.gs/8rYjZMg
Is there anyone who knows how to fix this issue? My wifes view is normal but mine looks like this I'm using v37 of BMC4
try pressin f3+t
btw whats even going on in here
craziest texture bug i have ever seen
its an ice spike biome at our spawn and that doesnt work either we even deleted my player data nothing is working lol
can someone send link for how to update a server to a newer modpack version
tried reinstalling the modpack?
!updateserver
00:00 Update Server Locally
01:19 Update on Server Host/Bisect Hosting Premium
01:39 Update on Server Host/Bisect Hosting Premium
Discord ➔ https://discord.gg/8ZmhaPPbjE
Twitter ➔ https://twitter.com/SharkieTV
Use CODE: LunaPixel for 25% off ➔ https://www.bisecthosting.com/LunaPixel
ty
trying that right now 😂
!fps @grand gate follow this guide first if doesn't work ping me
Can someone please help me?
hello after adding create mod it worked fine but after adding some of its addons the modpack stopped working Better MC 4 - v37 crashed without a crash report. The logs have
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m15[0m added, [2;31m1[0m removed, [2;34m1[0m updated.
update or remove steam rails
@unique jewel
is there a way to increase amount of hostile mobs? there's barely any spawning
put in mods folder
okay tysm !
seed -109999536311315264
My server is still crashing and I can't understand what's going wrong in the log file
Uploaded latest1.log from @gritty carbon to mclogs: https://mclo.gs/cpborTw
can someone please help?
worked.
I've been trying to get this to work for an hour now with literally no progress
Hi I'm using this modpack, running into some slowness. I realized I'm not using any java args. Do you guys reccomend using args for this modpack and if so what args do you reccomend? Thanks for any help! ❤️
Hello! Are there reccomended java arguments to have for the player client?
Oh I see the person above me asked the same thingLOL
haha
-XX:+UnlockExperimentalVMOptions -XX:+UnlockDiagnosticVMOptions -XX:+AlwaysActAsServerClassMachine -XX:+AlwaysPreTouch -XX:+DisableExplicitGC -XX:AllocatePrefetchStyle=3 -XX:NmethodSweepActivity=1 -XX:ReservedCodeCacheSize=400M -XX:NonNMethodCodeHeapSize=12M -XX:ProfiledCodeHeapSize=194M -XX:NonProfiledCodeHeapSize=194M -XX:-DontCompileHugeMethods -XX:+PerfDisableSharedMem -XX:+UseFastUnorderedTimeStamps -XX:+UseCriticalJavaThreadPriority -XX:+EagerJVMCI -Dgraal.TuneInlinerExploration=1 -XX:+UseG1GC -XX:MaxGCPauseMillis=37 -XX:+PerfDisableSharedMem -XX:G1HeapRegionSize=16M -XX:G1NewSizePercent=23 -XX:G1ReservePercent=20 -XX:SurvivorRatio=32 -XX:G1MixedGCCountTarget=3 -XX:G1HeapWastePercent=20 -XX:InitiatingHeapOccupancyPercent=10 -XX:G1RSetUpdatingPauseTimePercent=0 -XX:MaxTenuringThreshold=1 -XX:G1SATBBufferEnqueueingThresholdPercent=30 -XX:G1ConcMarkStepDurationMillis=5.0 -XX:GCTimeRatio=99 -XX:G1ConcRefinementServiceIntervalMillis=150 -XX:G1ConcRSHotCardLimit=16 @crisp summit
Thank you! ❤️
tysm!
i would say bmc 4 but really depends on your tase
anyone know how to get a portable crafting table? i keep pressing V but it doesnt work
use the modpackindex website to compare modlists
you could try out medieval mc or prominence then
they are more rpg oriented than better mc
u put that in here?
in options menu inside curseforge
press copy message with links and paste here
all?
yes
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | debug.log head / tail (~32k lines) | crash-2025-03-24_03.08.11-client.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32m[自动汉化更新] I18nUpdateMod-3.6.0-all.jar[0m
[2;32m[自定义局域网联机] lanserverproperties-1.11.1-forge.jar[0m
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
@near egret is this it ?
What is a good way to get the minimap disabled from the serverside? I know about the "§n§o§m§i§n§i§m§a§p" but what mod do I add to get a message displayed EVERY time a user joins the server? Removing the minimap mod is undesireable too because we lose waypoints and I don't want to explore Journeymap just yet
I tried finding multiple working join/leave mods but the only one that works works on joining for the first time and not every time so their minimap just pops back on
Ideally we disable the death waypoints too but those all seem client side :/
Better MC 4 - v37 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
remove serverbrowser mod
!alternates try this
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
ping me if it works
ok, i'm starting game
do you own minecraft
is Atl launcher safe?
yeah
ok i will try
not tlauncher which i assume is what you thought of
the safe one starts with a and has a green black logo
ok
i'm play at PCL
can someone help me my world won’t start up again
!moreinfo answer these questions and attach a log
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
-
What Minecraft version are you using? (1.19.2, 1.20.1, ...)
1.20.1 -
What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
CurseForge -
Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
Removed 11 mods (blue_skies, Bountiful-6.0.4, deeperdarker-forge, dragon_mounts_patches, dragonmounts, dungeonsarise, friendsandfoes, incubation, mowzies_cataclysm, mowziesmobs, stalwart_dungeons) -
What version of the modpack are you using? (v11, v9, etc)
Better MC [FORGE] 1.20.1 v37 -
Have you ever gotten past the crash condition without crashing, or does the game always crash?
Yes, when mods are added back into the mod folder. -
What steps cause the crash?
The pack was working until the 11 mentioned mods were removed. The server will not start up with the mods removed. On my computer, the game will start but when loading into a world the game crashes. I would like to know if it's possible to use the pack with those mods removed.
Uploaded crash-2025-03-23_13.51.52-client.txt from @pearl kelp to mclogs: https://mclo.gs/QomzyYD
Uploaded crash-2025-03-23_19.45.47-server.txt from @pearl kelp to mclogs: https://mclo.gs/HVJHpPK
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- curseforge
- only changed mods and changed the version of quark
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? no i havent
- "loading mods"
latest.log | crash-2025-03-23_14.09.34-client.txt | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
[2;32m10[0m added, [2;31m22[0m removed, [2;34m10[0m updated.
idk whats up now
make a post in #1061339968691257466 ill help you there shortly
you should ask questions and ask help there since the modpack is pretty modified
gothca sorry
@near egret need help again
i'm at PCL, want to download a new better MC
but can't donwload
Using Bisect Server hosting. Updating the modpack on the server results in a mismatch between clients and server. Clients are all running v37, server looks like it's running v37, but the server browser is saying it's running v36
so what i want to do?
Uploaded message.txt from @fleet dust to mclogs: https://mclo.gs/LW3LWMW
Hi
is port forwarding on BMC the same as port forwarding any other minecraft server
- What Minecraft version are you using? 1.20.1
- What launcher did you run Minecraft with? CurseForge
- Have you changed the modpack in any way? changed mod versions
- What version of the modpack are you using? v11
- Have you ever gotten past the crash condition without crashing, or does the game always crash? no
- What steps cause the crash? trying to load up the game on the website
v11 ?
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Curseforge
- Have you changed the modpack in any way except mods?
No
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
Won't crash if I remove Create: Connected
- What steps cause the crash?
latest.log | crash-2025-03-23_16.45.35-client.txt | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
[2;32m13[0m added, [2;31m1[0m removed, [2;34m1[0m updated.
what mod does it use for world sharing?
Does anyone know why the game crashes when installing watermedia-2.1.22? What mod causes it to crash?
a fork of e4mc
so basically e4mc
but cutomized for bmc
basically if u try to install like any other mod other than the ones provided with bmc it crashes
I've installed a few more and nothing happens, just Watermedia, and I wanted to know which mod is causing the incompatibility.
what mods?
Having difficulties starting my selfhosted server due to modpack errors.
- 1.20.1
- CurseForge
- I have only disabled the Friends and Foes Modpack cuz it was causing errors as well. I have tried removing the client and config files of Kiwi, Friends and Foes but it still caused the same errors.
- v37
- I have not gotten past the error, it refuses to start the server. The game works fine tho if I just start it via curseforge on my PC.
Uploaded message.txt from @sinful goblet to mclogs: https://mclo.gs/Dd6tcb8
is there any way to run the modpack (which i downloaded from the curseforge app) without having to open the curseforge everytime?
it looks like i have two minecraft clients at the same time
one of them have the modpack and the other one have the normal .minecraft
3 dots, create desktop shortcut
tried to do that but when i do so
it opens my main minecraft launcher
that doesnt have the modpack
Well this is the error that throws me
Uploaded crash-2025-03-23_16.46.36-client.txt from @hardy patio to mclogs: https://mclo.gs/vpoonIR
just from skimming it it says that bclib is the prob
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | hs_err_pid39922.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE].
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) curseforge
- Have you changed the modpack in any way except mods? no
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? game always crashes
- What steps cause the crash? when a game is being created
latest.log | hs_err_pid39922.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Hey I was wondering if someone would be able to help me with this 🙂 Please let me know if the pack is able to run on the server/client without those mods
yo is port forwarding on better mc the same as port forwarding any other server
Uploaded message_1.txt from @fleet dust to mclogs: https://mclo.gs/25zjL8P
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
yep
kk
Help
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | crash-2025-03-23_16.28.56-client.txt | CurseForge: launcher_log.txt head / tail (~26k lines) | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mCodeChickenLib-1.20.1-4.4.0.516-universal.jar[0m
[2;32mcreate-1.20.1-0.5.1.j.jar[0m
[2;32mdankstorage-forge-1.20.1-13.jar[0m
[2;32mEnderStorage-1.20.1-2.11.0.188-universal.jar[0m
[2;32mplasmovoice-forge-1.20.1-2.0.10.jar[0m
[2;32msliceanddice-forge-3.3.0.jar[0m
[2;32mSteam_Rails-1.6.7+forge-mc1.20.1.jar[0m
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
v37 aint working
help
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | hs_err_pid2080.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Added mods:
[2;32mdo_a_barrel_roll-forge-3.5.6+1.20.1.jar[0m
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Need help
Better MC 4 - v37 crashed without a crash report. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log | CurseForge: launcher_log.txt | crash_assistant_app.log
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Didn't touch anything from curseforge and 3 crashes in a row... I'll check to see if i can fix the issue on my own
I am having the same exact issue
Idk man i just downloaded it and 3 crashes in a row, 2 in the exact same spot
Walking, doing nothing but walking
FPS starts slowing down during 3 seconds and then complete freeze and boom back to menu then i have to close the app
the lazyyyyy mod pack fails on initializing
shame
Mod list changes beyond the modpack: Added mods: CodeChickenLib-1.20.1-4.4.0.516-universal.jar create-1.20.1-0.5.1.j.jar dankstorage-forge-1.20.1-13.jar EnderStorage-1.20.1-2.11.0.188-universal.jar plasmovoice-forge-1.20.1-2.0.10.jar sliceanddice-forge-3.3.0.jar Steam_Rails-1.6.7+forge-mc1.20.1.jar Removed mods: bedrockoid-0.1.jar Updated mods: immersivetips (1.0.0 > 1.0.1)
The game crashed: initializing game
Error: java.lang.IncompatibleClassChangeError: class settingdust.lazyyyyy.minecraft.AsyncModelPart cannot inherit from final class net.minecraft.client.model.geom.ModelPart
Weird
checking if my drivers are the issue
Same
[16:44:48] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.RegisterColorHandlersEvent$Item to a broken mod state
[16:44:48] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.RegisterColorHandlersEvent$Block to a broken mod state
[16:44:48] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.sound.SoundEngineLoadEvent to a broken mod state
[16:44:40] [main/ERROR]:Skipping early mod setup due to previous error
[16:44:40] [main/ERROR]:Unsupported installed optional dependencies:
[16:44:30] [ForkJoinPool-3-worker-3/ERROR]:Error finding injection insns: STORE injection point must be used in conjunction with @ModifyVariable
these are the error logs of BMC4 v37
uhh if anyone could help me out that would be great.. my mobs are currently invisible. specifically endermans in my xp farm. any help as to what may be causing this? BMC4 v37
!alternates try doing this
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
also like i cant hit them or anything. but i can hear them and disconnecting and reconnecting fixes is
!paging could you try this and screenshot the result
How To View Paging File Size
From the Windows search button search up "Advanced System Settings" and open the first result.
Press the "Settings" button located under the Performance section.
In the new section that has opened press "Advanced" and after press the "Change" button located under the "Virtual Memory" section.
icl this seems like a server issue no?
cuz im on a server not a sp world
curently have BisectHosting working the issue
another_furniture
downgrade this mod
oh no not you
idrk what your issue is sorry
oh u did reply to me thought u were talking to me mbbb
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
!moreinfo answer these questions and send in your latest.log
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
!alternates possibly watermedia then try reinstalling and adding mods one by one
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
version 37 SUCKS!!!
lowkey ong
could you send in your latest.log
Reason: Racial slur
Moderator: @near egret


qingspec [943315607565250621]
i told you your fix
version of another_furnite you are using is meant for a newer version of create
downgrade that and you are good
didnt work either
[17:03:17] [main/ERROR]:Unsupported installed optional dependencies:
[17:03:18] [main/ERROR]:Skipping early mod setup due to previous error
[17:03:25] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.sound.SoundEngineLoadEvent to a broken mod state
[17:03:25] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.RegisterColorHandlersEvent$Block to a broken mod state
[17:03:25] [Render thread/ERROR]:Cowardly refusing to send event net.minecraftforge.client.event.RegisterColorHandlersEvent$Item to a broken mod state
dont send a snippet of the log please upload the whole file please
is this one of those things where i should just downgrade back to v36 where everything was working fine.. cuz idk whats up with these invis mobs but like yh
Uploaded message.txt from @gusty pendant to mclogs: https://mclo.gs/OF2rkS8
downgrade create to 0.5.1j
and the addons you have alongside ot
the server just started up in this before anything crashes
wait for it to crash
actually make a post in #1061339968691257466 so i dont flood this channel
I love those disgusting interfaces applications like ATL, always a pleasure to feel like you're back in 2012 or smt
Uploaded crash-2025-03-23_22.03.22-client.txt from @narrow drift to mclogs: https://mclo.gs/sSRfGRz
Can somebody help me can't understand why i crash
did you add a mod called walkers
yeah
its already on 0.5.1.j
nit you
i started crashing after i morphed into a specific mob
and now i can't join on the server
you make a post in #1061339968691257466 since the pack is modified
you could make a post in #1061339968691257466 and se e if anyone knows of a fix
i have never heard of the mod so cant help you here
i give up time to downgrade back to 36 xd
I'm happy to arrive just at the wrong snapchot i guess xd
what
I just downloaded better mc and just at the exact snapchot where everyone crashes every 10 steps xd
im not even crashing
Was 36th realy better ?
i just have invisible mobs
YES
Great
Maybe I'll just reverse too
You're on curseforge ?
I'm having to go back to v36 at the moment myself, I was planning on upgrading my server to v37 but the server doesnt even start before i add things to it
Cause there i could change my version in like 3 secs
xddddd great snapchot indeed
yeah but i was told to avoid curseforge when download server packs specifically
bro u dont even want it to start tell me why hostile mobs dont wanna load in xd
Ooooooh yeah i see... Can't say i relate I'm doing a solo adventure xd, but damn boring ahh installation setup
also server pack link over downloads the lateast one
am i just cooked.. i cant find a v36 file
NVM opera gx saved me
Thank the lord
gotta love the feature to redownload stuff uve downloaded
Opera truly has that superman soul inside him
Hey, noticed this earlier. still not seeing v24 server files on forge, is it posted anywhere?
found the fix
you have to delete the BMC4 profile on forge entirely then redownload a new profile with BMC4
Is it possible to play BetterMC with a voice mod
what does the sunblock affect do
probably, but make a copy of your worlds folder and save it somewhere before adding the mod just incase
I tried, but it always crash with the mod i tried
idk how to help sry
Hey! Anyone know what the orange particles mean when you shift right click a fence/wall in BMC5 (neoforge)?
is fire ruby or netherite diamond better?
anyone know why this is happening?
i have essential mod trying to make a server for my friends to play on
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
What are the droprates for the farseer arms?
Ive killed 3 which took a long ass while to even find them and got 0 arms with looting
I've beaten nearly all of the mods and I'm working on my mega base, so starting over isn't optimal
How do I share a crash log? I'm new to this, sorry
Replying to an old message sorry for the late ping
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Curseforge - Have you changed the modpack in any way except mods?
no - v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
not sure whats causing it - What steps cause the crash?
just crashing randomly after the game runs for about 5 minutes
latest.log | hs_err_pid30748.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
not sure whats going on, just updated the game and it keeps crashing if anyone could help me out
BMC 5 v 24 server pack is just straight up crashing for me. So far, I've only added ftb essentials, diacord integration, afk timer, and simplebackups Here's my log
Uploaded crash-2025-03-24_00.29.41-server.txt from @hybrid magnet to mclogs: https://mclo.gs/NEIxUas
the crash log i uploaded is actually without those four mods present as well, so theoretically this is a nearly untouched bmc server
here's a log from a brand new server made on v24
Uploaded crash-2025-03-24_00.39.15-server.txt from @hybrid magnet to mclogs: https://mclo.gs/97duOeV
how can i ulpoad a crash log? bc im using epic fight on the 1.20.1 and it crashes when im in action mode and put an armor
click on the plus to the left of the text field, then upload file
the same thing is happening to me loll, im trying to figure what to do
does anyone have an issue where you keep getting crazy fps crashes? bc that what I have
!fps
Try this
this is will help with the fps issue?
am I the only one who is having issues with making my skin with the slim setting it doesn't happen on other modpacks nor does it happen with the base game itself it only bmc that this happen with the setting @agile cradle
this is forge not neoforge btw
there's a possiblity i bound the server to an already bound port and that's the issue, will update
looks like this is highly likely to be the problem
I'm closing my issue, turns out to be a simple port conflict
thank you!!
but sadly tho whenever im not using shaders my fps is around 240 but when i am it drops to 40 anyone know if thats a pc issue or fixable?
can i wait in the lush caves for a amethyst crab to spawn or will it not
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? CurseForge
- Have you changed the modpack in any way except mods? no
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? crashes
- What steps cause the crash? trying to load game through CurseForge
latest.log | crash-2025-03-23_21.13.07-client.txt | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
[2;32m12[0m added, [2;31m0[0m removed, [2;34m12[0m updated.
!compat
Following mods are incompatible with all LPS modpacks: Valkerian Skies, Eureka Ships, Essential (use !ea), optifine (use !optifine), clockwork, e4mc (use !ws), Create 6.0 and on (for the moment, wait on devs to do updates to their packs, do not update it yourself)
don't update mods as it is highly likely to break the pack, create 6 is not usable for any LPS packs currently
bless
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? ATLauncher
- Have you changed the modpack in any way except mods? No
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? Game always crash
- What steps cause the crash? Placing thallasium anvil on the ground
latest.log | crash-2025-03-23_22.06.16-client.txt | atlauncher.log | crash_assistant_app.log
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
how to find the amythest crab
what world type should i use
@agile cradle I have been having issues with my Minecraft skin as mine and Alex skins are supposed to be slim but in the game it shows their skins with the classic Steve build and its only with Better MC (its on forge verson not Neoforge btw) so it can't be just me
Gn, i have a problem with my world in better mc
1.20.1 [FORGE]
What launcher did you run Minecraft with? CurseForge
Have you changed the modpack in any way except mods? Updating to last version
v37
Have you ever gotten past the crash condition without crashing, or does the game always crash? No, is the first time the game crashes
What steps cause the crash? Coming back from twitling forest to overworld and vice versa
not seen this issue before, does it affect vanilla at all?
no I've check it myself it doesn't
other modpacks? what launcher you using
i use curseforge
check from minecraft's website instead of mc launcher
and it doesn't effect other modpacks
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Can someone tell me why when I try to connect to my brother's world LAN it shows something like this? BMC 5
for me i think it was either not defining a port at the client or defining the incorrect one
check server.properties for the set port and then make sure the ip set on the client says "xxx.xxx.xxx.xxx:12345" or whatever port you chose
can someone tell me why my game crashes when entering the portal from twitlight princess to overworld?
why does my game keep crashing when my friends join
does the fact we're using a program for lan change anything? Not a physical router.
like hamachi?
yeah
is there any way you can port forward and whitelist?
I don't have experience with hamachi anymore
yes and yes
!port
If you're having issues with your friends joining your server, your port for Minecraft may be closed.
-
Check with https://portchecker.co/ with your IP and Minecraft's port (drop down menu) to see if it's open.
-
If it's closed you will need to search online "How to open Minecraft port for server with (ISP Name)
Important note: a lot will allow port forwarding, but there may be some ISPs that will not allow any port forwarding. Please check online if this is the case for yours.
p sure you don't use a port iirc bc it'll just pick 25565
whitelisting should be in the serverpack
i'm aware it's possible but i'm wondering if it's within op's capability
yes
then that is da wae
I'll look through what you sent, maybe use other program
that's just a command on how to open ports for port forwarding
I'd seriously consider whitelisting as well becuase i've had more than a couple randos find my privately hosted server via some odd online search tool
can someone help me pls
!dontask
If someone is around who can help, it's better if they can see the full question.
Instead of asking
Is someone around who can help me?
Ask
How do I fix this crash?
This gets you a faster response and prevents wasting time.
why is my game crashing when my friends join only
oh
Why wont an amythest crab spawn, im in a lush cave this is my third one
aka tell what you need help with, don't just say I need help
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
but he ask
.
My game is crashing completely when I enter the twilight portal to come back to the overworld
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
1.20.1 [FORGE]
What launcher did you run Minecraft with? CurseForge
Have you changed the modpack in any way except mods? Updating to last version
v37
Have you ever gotten past the crash condition without crashing, or does the game always crash? No, is the first time the game crashes
What steps cause the crash? Coming back from twitling forest to overworld and vice versa
Uploaded crash-2025-03-24_02.38.26-server.txt from @mellow hinge to mclogs: https://mclo.gs/4sMKLW1
1.20.1 & curseforge & i only added a scary mod but it was working with the mod pack for 2 days & v36 & recently we havent got past the crash at all today & usually when my friends join is when it crashes
server or worldsharing
worldsharing
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
well It's closed, and found nothing about opening it with my ISP
Uploaded message.txt from @tired yoke to mclogs: https://mclo.gs/IZuEliA
you'll need to search online then on if it's possible
we added thehallowstalker & hero brine
it's telling you which mods it suspects
try disabling those and launching again
also when it finally load, i got this
please don't suggest that
also is bmc5 a fabric pack and i should be in #better-mc-fabric for that?
??? modernfix is just lag improvements and idk what radium is
bmc5 is neoforge, it stays here
raidum is also an optimization mod
i don't think this is going to break things too hard
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
it's not like we're removing synitra or something
recent crash report :
Is better mc worth it
Uploaded crash-2025-03-24_02.54.03-server.txt from @mellow hinge to mclogs: https://mclo.gs/biD7GHp
very
definetly
How many bosses?
but havin proboblems now
idk, I keep crashing, it wont load properly
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
https://spark.lucko.me/RnoxCvWxdn is there a reason it says there is 4gb allocated when in atl its set to 9gb
trying to figure out why my friends game runs bad
whats the server address
mine was running at the same level once i removed lazzyy i got like 4x my frames but removing it didnt do much for my friend
can anyone help me, when i play better mc3 i press V but still i cant use portable crafting table and idk how to get/activate one
...
#1109323795556216862 #community-servers-info we don't have any official
!fps
read the questbook ingame
is this from server or his player side
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
you dont have the modpack installed properly
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
!server
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
its just due to a mod mismatch
so just using another launcher?
yeah, it's very possible curse broke your download
why is that?
not really sure why they have such issues with it, but it happens all the time, and it's a clunky app in general so not good for lower end systems
its the /spark command not /sparkc
what launcher they using
atlauncher
can they take a screenshot of the settings, java/minecraft tab?
i had the same issue once removing lazzyy and using a verison @viral garden provided it 4x my frames and i was trying to replicate on my friends machine but no difference
once running spark i saw there is 4gb allocated which idk how thats possible
and yes
core issue: he's on the wrong java version.
awesome
If the issue you're experiencing is clientside, and is not related to a server, then follow the "Java" section in our performance guide for how to switch to a newer, more stable version of Java.
If the issue you're experiencing is serverside, then follow the Java section of our server installation guide.
also uncheck this
awesome
that should fix the ram?
and be bale to get like regular minecraft frames
lets see
possible, idk why it's showing he's only allocated 4 gigs according to his spark
Yikes
Chloe somehow said “try removing lazzyy” and in areas I was getting 60 frames I was getting 300+
it even shows in the jvm flags in the spark that only 4 gigs is being allocated, but it's not in his atlauncher, may wanna check your server just to be safe
When I’m in my server it says 8gb
I just made it yesterday
How may I check my server?
how's it hosted
@agile cradle Fixed, it was RAM problem, using 4Gb instead of 9Gb (Recommended)
ty for the support
how much ram does computer have?
16DDR5
ah yeah that's why.
I'll ask chloe if she can make a smidge modification to the fps guide that those with 16 gigs should use 8 gigs max cause I've noticed with those computers struggle the most
then you should be fine using 8-9 gigs the heck
may also wanna check you're using the right graphics card as that could also be throwing fits at you
i forgot how many i had on it
3070 from zotac
check in your game if it's using your graphics card or the integrated one from your motherboard
game is running good, good fps, no lag but the problem was the RAM xD
how?
the graphics card?
graphics is from nvidia
ty
processor amd
go to your control panel for nvidia card
how did you chnage from 4 to 9
y
from the launcher, in settings under java/minecraft
go to minecraft launcher (the official one), go to the settings, more settings, and change the -Xmx4G for -Xmx9G
also change it on curse or whatever u using
im in
you'll look for your java version
they have to change it from the modded launcher, not vanilla's
oh
i changed it on vanilla and worked
also on curse
can you send your world file please?
if you do it only on curse it wont work
Please read the full contents of the #get-support channel for us to provide assistance.
it does help vanilla too, but for the modpacks it has to be done from whatever launcher they use for them
so i should look for the java program?
yeah should be javaw.exe
changed java version lets see
which one?
last one
okay
idk if that worked https://rpg.prominence.wiki/performance-guide
wrong link
you're now using the right java version so that helps, as for ram idk why it's showing 4 as your min and max in the jvm flags when it's not even present in your atlauncher flags. go to the settings for the instance inside atlauncher
done
it says using global configuration for all
I haven't seen this before tbh. I have no clue why it's doing that
should i do something more?
go in game, and take a screenshot of your f3 screen
me?
no blaidd, the person who's been talking
oh my b
anyobody know how to fix this?
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
omw
mhm
v11 is EXTREMELY old. you need to update the modpack bro
its our custom fork of e4mc
Please read the full contents of the #get-support channel for us to provide assistance.
PLEASE do not disable mods
everything in v37 works perfectly fine
disabling stuff will just make whatever your issue is worse
please do a fresh install of the modpack and then resend logs
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
bclib is not causing it
yeah it's showing 9 gigs here, so I think you'll need to just ignore spark's error then
oke
that is strange though that it's showing xmx4 and xms4 in your jvm args, when that's nowhere in your args at all.
why did you remove 11 mods randomly
you cant just remove half of a modpack's content and expect it to work 😭
Just make your own pack at that point really
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
@viral garden @agile cradle should i just reinstall atlauncher or something?
no this wouldn't be atl causing issues.
if in game it's showing you're using 8 gigs from the f3 screen, just ignore spark
wait hol up
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...) prism
- Have you changed the modpack in any way except mods? no
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? i launched it from prism, created a world, and then it crashed while loading the world
- What steps cause the crash?
latest.log | debug.log head / tail (~35k lines) | hs_err_pid24942.log | PrismLauncher-0.log | crash_assistant_app.log
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
[2;31mblossom.jar[0m
[2;31mbmcpalegardenpatcher-0.1.0.jar[0m
[2;31mfasterrandom-5.1.0.jar[0m
[2;31mStructory_1.20.x_v1.3.5.jar[0m
[2;31mStructory_Towers_1.20.x_v1.0.7.jar[0m
[2;31mucrashedlol-0.0.3+1.20.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL. Keep in mind that ATL is NOT related to TLauncher in any way, and is not a cracked launcher.
To install ATL, do the following:
1. Go to https://atlauncher.com/download. If you are on MacOS, then choose the "Jar" version under the "Other" tab.
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATL doesn't see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "Install". Then, follow the on-screen directions.
7. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATL, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATL and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATL downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATL also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATL installed.
Please read the full contents of the #get-support channel for us to provide assistance.
you need to use the latest create for the modpack to work
its not lazyyy causing it
none of these errors mean anything
i just launched it through forge > minecraft launcher and it did the same thing, crashed when it was loading world that hasn’t even been played yet
Better MC 4 - v37 crashed. The logs have been uploaded to mclo.gs:
- 1.20.1 [FORGE]
- What launcher did you run Minecraft with? CurseForge
- Have you changed the modpack in any way except mods? No
- v37
- Have you ever gotten past the crash condition without crashing, or does the game always crash? It always crashes when its generating a world.
- What steps cause the crash?
latest.log | hs_err_pid69126.log | crash_assistant_app.log | CurseForge: skip launcher
Mod list changes beyond the modpack:
Removed mods:
[2;31mbedrockoid-0.1.jar[0m
Updated mods:
[2;34mimmersivetips[0m ([2;31m1.0.0[0m > [2;32m1.0.1[0m)
Hey. Im on a macbook pro M1 running this through curseforge. I downloaded the updated BMC from the one released this march and i have not uninstalled or installed any additional mods to the pack. and i also have the lates java (if that does anything). The normal start up is regular but as soon as i'm about to create the world it crashes. Its ran perfectly fine around december on this same computer, but when i wanted to play again this month its been crashing as soon as its about to generate a world. If you need any more info pls lmk! thank you.
exactly the same issue as you 😭
1.20.1 [FORGE]
What launcher did you run Minecraft with? CurseForge
Have you changed the modpack in any way except mods? just trying to ad world edit mod
v30.5
Have you ever gotten past the crash condition without crashing, or does the game always crash? It is like loop restarting stopping. I am new to this modding world anyway there is only one world edit file for 1.20.1 forge i am not sure how to get it working. others have it working but i have no idea
try axiom instead of world edit
I will give that a try
anyone have any videos that would help me learn the new stuff about this mod?
I am not seeing a forge one?
ah it may be the fab alternative to world edit
may still be able to use it as bmc does have sinatrya connector in it
can you try removing lazyyyy, if it persists remove does it tick
what does lazyyy do i dont want to ruin any of the world not sure if it will?
so this has nothing to do with why my friends frames suck?
just sucks bc i know it can be fixed mine was fixed by removing one file
mc sucks at 75 fps lol
!fps
tried axiom it does not work with forge and i still cant seem to get world edit to work either
best I can suggest is try an older version of the mod
yeah nothing
im tryna add a .jar mod to bmc4 and my game keeps crashing do yall know why that is
what mod, where did you try to install it
jjba ripples of the past, and i got it off of curseforge website
what launcher you using
curseforge
go to curseforge, right click the modpack, open folder, pop the jar into the mods folder
did that
restart the game
very likely
ive been trying to remove mods for my friends frames
like removing lazzy last night changed my night lol
don't remove random mods. it'll break stuff
this guy ik has the same problem i just dont know how to see what it is
ik i put them back
is there no other profiler type thing
it was mod conflicts
idk how @viral garden knew lazzy was the issue
cause she's one of the devs
yowza
i wish had just a tiny bit more of that dev magic
then ill never type in this discord agin
nah all the devs poke around and help each other out. always something to learn
oh shit bmc5 supports jjba ripples of the past
i need help im tyring to play better mc forge but it keeps crashing not really understanding the crash report could use some help
i lied
read the white pop up at the top
It had the excat same problem as the one with curseforge launcher
so the mod is showing up and i can load the game but it isnt appearing in game
Uploaded crash-2025-03-24_01.39.24-client.txt from @wicked fern to mclogs: https://mclo.gs/puIqyhA