#better-mc-forge
1 messages · Page 365 of 1
Hello, im trying to create a bettermc bcm4 forge server but ive seen on curseforge that the serverpack is named v7 and also on the server pack theyre like 100 mods and on the modpack installed with sklauncher theyre over 300. is that the correct server pack that i should be using?
and im getting a bunch of mismatch errors when trying to join
Naturally generated right?
Hello!
Bettttttt ty
Hi
Sadly my friend sever is 35.5
hello guys.i need help.so i went into the twilight forest but somehow i instantly spawned 100m in the air and water mlg or something didnt work.i had pretty good stuff and i cannot go back to get it cause i would die to fall damage.pls someone help thx
replace the dat_old file too or nah?
bump
does anyone knows why Better MC runs so smoothly even while having 300 and more mods?
im trying to make a modpack with my friends and i wanted to see there is something from better mc that it can be used for making mc in general less laggy
Have u checked entity culling
found it btw, i got the luck potions from a bounty board using a cleric decree
how can i fix it
- version 1.20.1
- i used curse forge
- I added a few mods
- v36
- aways crashed
- when I try to close the JEI recipes screen
this is message for me?
no
yeah i have it, but the loading of the launcher, creation of the world etc keeps being kinda laggy
?
hello guys.i need help.so i went into the twilight forest but somehow i instantly spawned 100m in the air and water mlg or something didnt work.i had pretty good stuff and i cannot go back to get it cause i would die to fall damage.pls someone help thx,does someone have an idea pls🥲
anyone know when better end is coming to bmc5
it literally says that you added a mod that causes incompatibilities, what did you add?
if you didn't add anything, why can't you play the modpack on the CurseForge launcher instead?
if you don't change anything it's literally impossible encountering crashes
Does anyone know anything about, or where I should go for finding out why Aquaculture 2 was removed from the modpack, and how to get it back?
no idea but i guess you can try adding it from the CurseForge app
and it doesn't work?
Yea, they must have removed it for something, I was just hoping they could explain why
Well yeah, the mod is removed from the actual modpack
but you can add it by yourself
I tried that too, crashes.
Adding a version of both Better MC and Aquaculture 2 that on paper match with a version of forge i choose, and when i load up the game with it it crashes,
yeah, better mc vc or directly vc you tell me
Better MC
What launcher do you use?
i love eating caves
anyone know why my death marker didnt show up on the minimap?
i died in the nether and i can find my corpse
try looking in your waypoints
thank you! very much appreciated
Because of other DImension
If is like in BMC4 for me when I add a Waypoint in the Nether, it is only visible on the Minimap, when I set the Dimension I am to Overworld, even if I am in the Nether. Because when I add Waypoints to the Nether with the auto detected DImension Overworld the Waypoint is visible in Nether (including all overworld waypointsa and in Overworld I see all Nether waypoints of course).
hello guys! do i ask here or somewhere else about a bug with villagers?
i see there people talking about their problems so i gonna tell what i have.
I've created a villagers farm from a video and they only pick up carrots, but don't plant them.
Video is called: "Minecraft Easy Multi Crop Farm - 850 Per Hour" by Shulkercraft.
So, in the end, i waited 2-3 days for carrots to grow, and, no result. None of 4 villagers don't do anything exept carry up the carrots i throw to them
About mods: i added: OreExcavation and EasyVillagers, XPTome with iron "furnaces" and "chests". No more
One question, how do I get to the everdawn dimension?
What do you do with silver?
silver knife and if you ad iron furnaces then you can make an silver furnace
having an issue where i killed the illusionist and still cant claim the quest even found 2 more towers and killed them aswell BMC4 1.20.1 v36, curseforge launcher
Use the questbook top left of inventory screen
Use the JEI mod
There is a mod in the mod pack that conflicts with villager farms for some reason
well, that's a clear conclusion. how do i find which one
ive downloaded the modpack and ive put it into my mods folder but its not running any of the mods when i load forge
can i get any help?
is there a way to mark where your waystones are
bro my game is like really messed up and idk why
the ones in the overworld is showing up but the nether one is not???????
idk whats up with ts
Pacifying pillagers - I seem to remember it taking 15~30 minutes in the past (vanilla). Is this capability ruined now? I've afk'd in front of a wall with a pillager shooting into it at me for nearly an hour and his weapon hasn't broken yet. Wonder if "It Takes a Pillage" mod or something else might have affected this
who else game is crashing while loading
this lil dude is pretty much chester from dont starve and i love it
That’s not how you’re supposed to download it
Do this
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Dk why it’s not working but you could just place waypoints there if you want
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
please do not remove mods
none of this is necessary
do not follow these directions & tell whoever said to follow them that they're wrong
once again
you need to update to v36
we offer no support for old versions
Do the v 36 get in a sever 35.5 :0?
guys is this a hostile structure
naw
pls dont be sarcastic i dont want to lose my stuff
im not
Hi, my friend and I have a problem in our server, when we log in to the server, we get stuck in the ''loading terrain'' screen and we cannot enter the server, and sometimes our game crashes. We tried to restart our PC, allocate more RAM to our game and restarted the server but it still doesn't work. Any ideas to fix this ? (idk if this info has a correlation but we are at the world border to find some farseer) Thanks for your help 😄
So I bought a Bisect Budget server, but I can’t figure out how to join it, I paste in the IP Address, but it keeps coming up like it’s not connected?? Anyone help point me in the right direction here?
So i am hosting a server on bisect for BMC4, wasn't having this issue until i took the server off of whitelist.
I get an error code: internal exception java.net.socketexception connection reset
Then it resets my server, ive looked on the internet, youtube, wikis. Peopel are saying mojang cant fix it so im wondering if its a BMC4 issue or Bisect issue..?
started a new world and my skin defaulted to one of the lady ones; how do i make ATLauncher match the skin I have on the mincraft launcher? The logo for my account connected to ATLauncher displays the correct skin
then update the server to v36
i think so
check the mod list, theres a lot of performance mods
you do not have the same modpack installed as the server
list what mods you added
!server you do not have the server installed properly
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
TLauncher is known spyware and is also unable to install mods or modpacks correctly. Because we offer no support for piracy due to Discord TOS, you will need to provide proof you own a legitimate copy of Minecraft or leave the server. For a safe, working way to install both mods and modpacks, read the #faq guide on installing modpacks.
that is not how you install a modpack
and it never has been
read the questbook ingame
Please read the full contents of the #get-support channel for us to provide assistance.
i cant open chests, doors, trapdoors, crafting table, furnace how do i fix this? 😭
whatever runs well on your pc?
no
Please read the full contents of the #get-support channel for us to provide assistance.
go to the server dashboard and make sure the server is online with the pack installed
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
can you give more context?
Is there some sort of guide for what to do in bmc4?
I see an advancements menu, but no quest book
if i try to right click everything, it just wont work
i cant even sleep
oh yeah, i'll do it again but so, do you know if playing a modpack from the normal mc launcher and the curseforge one makes any difference?
you need a modded launcher to install and play modpacks
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
okay but are you on a server
theres a questbook, in the same spot as usual
how do I get the questbook?
if you are within a few chunks of spawn then you will not be able to place or use anything
its a vanilla feature
same spot as usual
top left of your inventory
i assume %appdata% .minecraft mods is not the best by seeing the response below, thank you so much then
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
yeah i saw that thank you
if i rejoin the server, it works fine but it will happen again, i can't interact with anything in the server 😞
Hey guys so I purchased a server using bisect for BMC5 on neoforge. Who gets admin or cheats if there are any.
??????
why is my jei blank?
try space
ur welc
is there a mod in here that lets you team with people in the gameto see where they are
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
ftbteams
you need to type text for items to show
contact bisect support
like in discord or..?
Hello, I was wondering if someone could help me install the Create mod into my BetterMC server, or is that not possible?
put it in the mods folder
Sounds easy enough. How about for compatibility? I had searched up create mod 1.20.1 and there was 10 options. All looked the same however they'd all end in a different letter, Fore example CreateMod i, CM j, CM o
huh?
you just search "Create" on curseforge and install the create mod
the one that matches the version & modloader you're on
idk what you mean by the letters
I do but when i type the command nothing pops up for mee to use the command 
dude
you dont need to run the command anywhere
the "!server" is what makes the bot say this #better-mc-forge message
thats why i linked the message to you
the bot is telling you what to do to resolve your issue
so we dont need to type out that text every single time
hey is prominence fabric or forge lighter
i need a light modpack
prominence forge was crashing even tho i gave it 10g or ram
and bmc5 is nice
but i want prominence i really like it
Please read the full contents of the #get-support channel for us to provide assistance.
all of our modpacks can run on any computer
if you are crashing please go to #1101995173430448208 and follow #get-support
is there a wiki???
Hey guys, so i played BMC 4 and there you could get a extra +1 lvl for your enchantments, now i switched to BMC 5 and there you could not get it, someone knows the mod for the extra lvl?
you have the questbook and the jei mod,
questbook is top left of inventory screen
and the jei mod is the search bar bottom right of inventory screen, search for what you want and left click to see how to get it and right click it to see where and how you can use it
bump
hello guys.i need help.so i went into the twilight forest but somehow i instantly spawned 100m in the air and water mlg or something didnt work.i had pretty good stuff and i cannot go back to get it cause i would die to fall damage.pls someone help thx,does someone have an idea pls🥲.ive beena asking this like 2 times before but noone answers
uh guys, im pretty lost rn with the modpack. i played literally like normal minecraft with full diamond and an enderman farm. Is there a path for me to take to do some other content for more fun and gear? im perfectly fine with a QOL modpack only but this one doesn't seem to be one? Thank you in advance
Bmc is meant to be vanilla with a bit of extra flares.
Hello
Do you have cheats on?
Yo, I have server with my friends and need help. My friend has an item which can generate gold, irons, tungsten, diamonds, etc. If someone have any suggestions what could that item be please tell me 😄
i got it now
Generate?
If y’all have cheats on that’s probably how
there are any cracked servers because me and my friend really want to play this modpack together but he dont have a premium account ?
anyone know how to use backpack?
Where to get it
t launcher of course xd
click all
Idk if its generate he only told me that so i dont get some clue to what item is
then choose modpacks
Got it on Fyp
Anyone Tracking on how to know the exact version of mc to get the whole Better MC pack to run without it saying incompatable?
there are any cracked servers because me and my friend really want to play this modpack together but he dont have a premium account ?
screen froze, whats wrong here?
quick restart prolly
Of my device?
the app
How would restarting curseforge help with a frozen screen?
How can you get ores fast
Hold it in your hand and right click or put it in the back slot
Then press b
Did you add essential?
@radiant jay which essential pack do i need?
No you don’t need anything
Did you add any mod?
negative just the BMC4
What launcher are you on?
1.20.1
What exactly do you mean by that still new to all this it took me n my homeboy like 3 hours to figure all this out lol
Screen froze again🧍♀️
thanks
Np, How did you download better mc 4
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
what do i need to repair valk pickaxe?
Uploaded latest.log from @grand gate to mclogs: https://mclo.gs/sv0PYdq
anyone know if any what chest holds the most space?
'
Can someone help me turn off the minimap? I can’t just remove it from the mods folder. Also, how do I change my skin? Every time I click "Play" in CurseForge, it opens the game directly but not the launcher.
use the toggle minimap keybind?
check controls and bind it there
My screen keeps freezing, help?
stop spamming it
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
how much ram is allocated and what launcher are you using?
also quick question: why is L_Ender's Cataclysm not in BMC5? it was in BMC4 unless it's not anymore?
I have 12 allocated and I use curseforge
too much
lower it to 8192mb (Aka 8gbs)
also swap to atlauncher or prism
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
I’ll try that, thank you.
this is from another server that explains it a bit better:
The CurseForge Launcher is built on the Overwolf platform, which is known for being a bloatware platform. The CurseForge Launcher also persistently has issues updating packs, causing instances of desync where the pack differs from the standard. This creates issues where different players who think they are "on the same version" may experience different mod configurations, different mods being loaded, and different data pack load orders. If any of these things differ from the standard version of the pack, you will not be able to play with other players or join standard version servers. You may even experience world corruption in your single-player saves.
We recommend you switch to Prism Launcher (most user-friendly!) or ATLauncher for the best and most stable experience.
An Open Source Minecraft launcher with the ability to manage multiple instances, accounts and mods. Focused on user freedom and free redistributability.
ATLauncher is a simple and easy to use Minecraft launcher which contains many different modpacks for you to choose from and play.
It actually wouldn’t start when I put it around that much
Nope
I’ll try the ATLauncher. I have noticed curseforge is the only one that gives me trouble lately
I think 17 or 21
1.21.x uses 21 so make sure you do that one
also ATlauncher is a little more technical heavy to use compared to Prism which is more user friendly
So which one would i use?
Imo Prism
Im not very tech savy
Def Prism then
What’s the difference between 64bit and ARM64?
Thank you very much. Hopefully this works.
heres some screenies of prism's UI
I love the category things
to install a pack swap to the platform your getting it from and download it there curseforge will most likely need you to open and download some mods tho
Why does it say that it can’t download some mods form bmc5?
hi, someone can equip the gloves of aether?}
and download them and let it pull them from where your downloads folder is
I don't get the interface in the inventory
there's a keybind or you can edit the fancy menu overlay to show the button again
Ohhh that’s what you meant. Sorry, thank you.
the keybind not work
screenshot
you do realize that doesn't help at all when I asked about the keybind
may I ask also what launcher are you using as the keybind should work unless you used the wrong mod's keybind for the menu?
sorry bro i understand other thing
i use the launcher premium
?
but i solve the problem
the basic launcher?
yes
bad
why?
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
don't install mods to the main launcher
Highly recommend you switch to Prism Launcher or ATLauncher for the more stable experiences
- Prism Launcher (most user-friendly!)
- ATLauncher
An Open Source Minecraft launcher with the ability to manage multiple instances, accounts and mods. Focused on user freedom and free redistributability.
ATLauncher is a simple and easy to use Minecraft launcher which contains many different modpacks for you to choose from and play.
you can mess up normal game files doing it in the basic launcher
Hey, so I tried manually downloading the modpack and playing it through Curse Forge (Better MC BMC4] on my potato laptop but it wasnt really playable with my specs. Would the performance be better if id buy a server through Bisect Hosting? Or it wouldnt change much?
I just dont know if its worth my money to spend it on the server, idk if its going to work that way without lagging
Or do my laptop specs still mean a lot even when buying the server with lets say 8 gb of ram
in a technical sense yes, performance would improve because your system will only have to worry about client-side logic and receiving data over the network
but in practice the difference isn’t extremely noticeable
it might be better but im not sure if it would be enough for you to be able to play smoothly
have you tried checking out the performance guide?
maybe also try finding a bmc server from #community-servers-info
see if connecting to them helps
that would be a good test to see if buying a server would pay off
thats a really good tip appreciate you
to be honest not yet but will do so
thanks for helping me out
anytime !
Is prism meant to take this long or could it be my wifi?
Does anybody know why the modpack doesn't work with Essential installed
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
did you go to each tab and then after downloading everything chose the folder they are in?
Yes, I believe so. It’s working but it just took 30 minutes to start up
I mean working as far as it’s starting the installation
Thank you very much
Had to add more ram anyways but it started up super fast I guess it was still downloading things so scratch what I said.
Froze
Again😔
I don’t understand what could possibly be making me freeze. Gpu ?
how long does it take when the server need to restart?
anyone know the best armor and weapon defeat warden?
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Idk if this is the right place to talk about stuff in game but couldn't find the exact room except this. Anyways, i found a dragon egg but when it hatched after a long time he stayed for a couple of minutes then disappeared
. so what am i missing here? how do i tame him?
why does bmc5 keep turning off shadowplay
you need fish, any type. then wait for him to grow to put a saddle on him
where can get glacial heart?
why wont essential work with better mc
it jus turned winter and the water at the bottom of my elevator froze up and i died
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
Search for it in JEI and left click it
Oh thank you so much. if you dont mind telling me if there is a possible way to know what season im playing ? some plants doesnt grow in the winter you know but i just dont know which season im at
i needa build a base im runnin out of storage space fast
well i got a base but i aint got a house
does snow melt when the season changes or am i stuck with the snow for the rest of the game
i would assume it does
i believe the snow melts
Make a calendar
The quest book also tells you this if you didn’t know
What's the best armour in this and how can you get it? Also are there any easy beginnerish methods to get xp other than quartz?
Ignition or cursium if I remember correctly
Just use JEI
And questbook
how do i increase the server's moblimit?
we got a lot of players that can't find leather to save their lives
I am trying to setup a server for the latest version on an ubuntu laptop
I have zero idea what I'm doing and only managed to install Java
and download the server files
what do I do next?
what launcher you using
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
!cracked
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
just updated some of my mods, and my forge, and it broke the "every compat" mod. game would keep crashing on boot until it was removed.
TL is illegal and spyware. you have to provide proof you own official MC
don't update the mods in a pack
too late, lol.
You wait for modpack updates, not mod updates
You'll have to reinstall the modpack now
in order to undo the new update, I assume?
yup. you broke the pack. gotta redownload
you have to own minecraft to play minecraft.
it's a 1 time purchase.
any country can purchase minecraft
it's not restricted to only americans. it's still a 1 time purchase game. this isn't World of Warcraft where you pay monthly
minecraft website isn't hard
save up the money
It's better than letting creeps key logging all of your computer, accounts, etc
if you already own minecraft, you can just provide proof, but you need to absolutely own minecraft to play it and any packs. Tlauncher is illegal and it takes your information
No minecraft, no modpack
Only issue with this is that I have downloaded probably 15-20 mods and resource packs on top of BMC. Is there any way I could single out the newly added mods to start again?
go to mods folder and sort by newest
Minecrafts mod folder?
what launcher?
Curseforge
right click modpack, open folder, then mods folder
How would I sort by newest?
I can only see date modified, and that's not accurate to when I added them
date modified should work
Nope. Seems like its a totally random list
hii i cant to play with bettermc it gives me an error like "extra mod"
what launcher you using
curseforge
Reason: cracked
Moderator: @agile cradle


m1zle [296337553055940608]
did you add essential
i cant to understand what am i need to add
You don't add essential. bad mod
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
loading
How do you get the multi ore things like cincinassite diamond and netherite-diamond and whatever
it says that I don't own minecraft , but i have
after log in
redownload the pack, you are using a crappy mod we offer no support for. Essential is crap
it has massive issues with corrupting player worlds
ok lmao redownloading
why i havent FTB quests style?
that's advancements, not quests
open your inventory, click the little book in top left
ahh, ty
when I run start.sh it doesn't say anything and when I try to connect using direct connection "localhost" I get "getsockopt"
what does this mean and how do I fix it?
where did you download serverpack from
curseforge website
you on linux or mac?
!glfw
For users who are experiencing issues with the built-in GLFW, there's a quick and easy solution for you to use the latest, bug-free GLFW that can remedy the solution.
- Download a pre-built GLFW library from my repository at https://github.com/Frontear/glfw-libs/releases. Ensure you download the correct file from the desription of the release. You may also compile it yourself, details can be found here: https://www.glfw.org/docs/latest/compile.html
- Save the file in a location you can remember and will NOT delete (the file MUST stay there or else it will stop working)
- In your launcher, go to the java parameters (this is the place you put your GC arguments), and add
-Dorg.lwjgl.glfw.libname="path/to/the/file". If, for example, you downloaded the file in your Downloads (C:UsersMeDownloadsglfw3.dll, then your argument would be-Dorg.lwjgl.glfw.libname="C:UsersMeDownloadsglfw3.dll")
try that see if it helps
so, i finally got all the mods added and booted it, and my world isnt here.
!alternates at the bottom
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
whats difference between BMC4 and BMC5?
it says bash: !glfw: event not found
!alternates?
MC version, modloader, few mods ain't on 1.21 yet
yes read the bottom section of it
but instead of atlauncher you'll just move it to the new modpack download. you have
I shouldn't overwrite the other saves folder though?
no, you just put the worlds into the saves folder?
still an error, I played with it yesterday and nothing like that happened
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
make a portal somewhere else
!cracked
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
equip it and press B
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
TLauncher is known spyware and is also unable to install mods or modpacks correctly. Because we offer no support for piracy due to Discord TOS, you will need to provide proof you own a legitimate copy of Minecraft or leave the server. For a safe, working way to install both mods and modpacks, read the #faq guide on installing modpacks.
I tried the glfw fix and it didn’t work
My server folder looks like this
Is there something I’m missing
start.ps1 crashing after all steps
but server is working
soo... is it works or nah, lol?
i can connect to it (cuz im host ofc)
but can people join me?
Does anyone know why beacon beam is not visible when you have height difference bigger than ~25 blocks between you and beacon?
Is this by any chance fixed in v36?
I stopped getting getsockopt but I now have this. What do i do?
start getting getsockopt
I just got this error on startup and not sure what to do now, would really appreciate some help! Failed to download file.
Name: 5.json
URL: https://piston-meta.mojang.com/v1/packages/703f3f04af2ae314c1e079d7dcc2f5c098407f8c/5.json
Error details: HTTP server doesn't seem to support byte ranges. Cannot resume.
Filename on disk: 5.json
Path: E:\Curseforge\Minecraft\Install\assets\indexes\5.json
Exists: File
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
ok dm its working already btw u wrote that it isnt working on the tlauncher but ahhah idk why my friend is playing with me now
cause they broke the pack to make it work, it's illegal and we offer zero support for it. playing with someone who's using it is dangerous for you as well cause of the keylogger it uses. it takes from your conversations with them
ew okay understood thx
what does exit code 6 mean
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
1.20.1
curseforge
no
BMC4? the one on the curseforge website
this is my first time trying the modpack
the game loaded, i went to create a new world then the game crashed and exit code 6 happened on the minecraft launcher
im on mac
ill go look for the game directory
should i upload my latest.log?
cuz it literally has my fullname in every single sentence 🤣
this is my crash report
Uploaded hs_err_pid98879.log from @broken shadow to mclogs: https://mclo.gs/8K1Xsgk
:warning: This is a hs_err_pid file.
These files may contain personal information such as your session token.
Mclogs automatically censors these files, so you should delete your original message now.
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
Please read the full contents of the #get-support channel for us to provide assistance.
Better MC 3 - v19 crashed!
- 1.21.1 [FABRIC]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way except mods?
- v19
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
latest.log: mclo.gs
crash-2025-01-22_19.39.37-server.txt: mclo.gs
CurseForge: launcher_log.txt: mclo.gs
Mod list changes beyond the modpack:
Mod list wasn't modified.
press the xaeros minimap config button and disable the minimap
and you can change your skin on the microsoft website
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
like 1-2 mins
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
Hello! Playing BMC5, was wondering how to reenable using the space bar to repeat a recipe while crafting
Unsure if this got answered yet
is there any food better than golden carrots in BMC5?
for like standard use, not gapples or unstackables etc
Hi! I wanted to know if the ''Easy Magic'' reroll is not available for Minecraft Forge 1.18.2, I see the other features of the mod but the reroll button is not available
is there a list of mods that are incompatible with better mc?
bcm5 crashing on launch
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
optifine and essential. neither of them are needed
- minecraft version 1.21.1
2.curseforge 3. updated from v14 to v15 4. v15 5.Crashing on launch has not fully loaded 6. loading the pack
need logs as well
Nvm reinstalled v14 and then reinstalled v15 and it fully loaded now
send a screenshot of your server console
yes your server is online
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
please answer all questions or we cant help
i dont think cataclysm exists for 1.21.1 neo
if I added mods can I still get support?
Better MC 5 - v15 crashed. The logs have been uploaded to mclo.gs:
- 1.21.1 [NEOFORGE]
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
Modrinth - Have you changed the modpack in any way except mods?
Yes - v15
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
Always crashes - What steps cause the crash?
latest.log
debug.log head/tail(~26k lines)
crash-2025-01-23_08.23.45-client.txt
Modrinth:session_20250123_075605.log
Mod list changes beyond the modpack:
The mod list diff was uploaded due to it's large size.
first xaero minimap was a later version than supported by xaeroplus so fixed that then found out neoforge was earlier version than mods supported so fixed that but IDK what the logs here are saying
I also did try making another profile that simply is mod and neoforge updates without the xaero minimap update and it worked
are there any outdated mods in Better MC [FORGE] BMC4? It's crashing on start
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
it's this chat dw
if you added mods
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
if you are playing original version (unmodified) of pack - support goes here
I does though prettysure
first time using mods its like super laggy and it takes 10 minutes only to open the game everytime how can i fix it?
its depends on your setup
!fps
Ye i did that and i have everything on the lowest possible i mean its still playable at 20 fps but sometimes doesn't load and i have yo for example break the same block twice or more
what launcher u using
how much ram allocated
Curseforge
8gb i think(?)
Like when i open the default launcher from Microsoft store
There is java then the mod but it has like a mark on it
Saying it's experimental or something
when making a server for this mod, does all members need to have the mods installed to play? like how does it all work?
okay so it was only released recently so my bad
https://www.curseforge.com/minecraft/mc-mods/lendercataclysm/files/all?page=1&pageSize=20&version=1.21.1
they are tackling the bugs at a pretty quick pace tho
I Need a moderator, My friend and i made a server recently and put in alot of hours, I logged in today to everything gone what happened how do i fix it ?
is the vertical rails mod in BMC4?
and if not is there a way to add it to my server without breaking my server?
why ATLauncher?
I use Modrinth
found online a comparison table and yeah IG I'll download some others to see
hmhmhm
specifically prism and atlauncher
im on my own server
where i can check ip for friends? they cant connect using my ip
ipconfig/all just said that my ipv4 is 192.168.0.11
We suggest using atl
Well, my suggestion is anything (that won't get you banned here) other than curseforge
real
Modrinth for me has issue where it can't download some mods in some packs so you need to manually download em
But if it works for you, good
I have nothing against modrinth, prism, multimc, gdlauncher
I have some stuff against curse

i see atlauncher has both modrinth and curseforge mods
oh dang I have 32GB RAM I thought it was 16GB
prism has external tools
any help?
Is your friend connected to the same network as you?
192.168.x.x is a local IP address.
nah
If you havent setup port forwarding, then you will need to do that. Then provide them with your "external IP". Which you can just search in Google for "My IP address"
Not the safest option, but thats what I do
You think you're giving them your external IP? 192.168.0.11 would be your internal IP
yeah, im giving them external, which starting by 37
and nothink works ofc
Oh okay, then you will have to get onto the admin settings of your network. And verify that the port forwarding is working correctly. If it is, and you're also providing external IP. Then I have 0 clue 😂
so i need to setup a router using this thing?
If the computer that is running the minecraft server doesnt have a static IP. It couldve changed, and messed with the port forwarding as well. Just a heads up
yes
well... i dont have password for this lol
its usually something simple like
admin
password
or
admin
admin
or no password at all
Well crap, I was hoping I could help. You could contact your Internet Service Provider (ISP) and ask them to set that up.
i need to open ports on router, yes?
Yes, officially known as "Port Forwarding"
why i cant share world? it just have no interface to do this
in solo mode it give me an error
!fps
anyone has any other fixes besides these for crafting lag fix? it just reduced the lags tiny bit. tried everything
only LunaPixel modpacks are lagging,
what hieght is best for stripmining netherite
in vanilla i know it's 15 but wasn't sure about BMC4
bmc5 version of aternos is 15 while tlauncher has v7, how can I deal with this?
Hi guys, I need help, my friends and I were playing Bettercraft through Radmin and it keeps disconnecting, what could it be?
What launcher are you on?
There is a mod that conflicts with villager farms
deforestation commencing
Ain’t no way you’re gonna deforest all that
That’s gonna take some time
light work
Hopefully you have smt nice to watch while doing it hahah
real
bro this snow is annoying
i hope it melts when the season changes cuz that would be annoying if it does not
Hi! I started an adventure on bmc4 but I saw that there was the spirit mod on bmc3 and bmc1. Is the rest of the content similar?
Or is there BMC which is better?
can someone help me I can't get my crafter to face the direction i need it too
Asking again. Playing BMC5, was wondering how to reenable using the space bar to repeat a recipe while crafting
modrinth
installed modpack from curseforge and transfered it
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
!tps
Please follow the guide here for changing the Java version your server uses. This will improve performance dramatically. If you are on a third party server host, you likely can not change the Java version your server uses. Bisect Hosting and a few VPS providers do allow changing Java version, though, which can usually be done through your server dashboard.
The method on Bisect is to simply go to the main dashboard page, and select "GraalVM 22" as the Java distribution. If it crashes, use 21 instead.
For further performance improvements, you can also follow this guide.
Reducing server render distance in the server.properties file is also a very good way of reducing lag. Most of our modpacks include mods like Bobby and Farsight, which make it so reducing server render distance will not affect players.
If lag persists, run the following command ingame:
/spark profiler start --only-ticks-over 50
Then, send the link in this channel.
anyone know how to build an enderman farm in this version?
none of those issues are present on the latest version of the modpack
!alternates please do a fresh install and do not update mods or the modloader version randomly
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
outdated mods have nothing to do with it
Please follow the performance guide to improve your game performance, as this is likely to resolve your issue.
!alternates you need the modpack installed to play
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
how is the server hosted?
put it in the mods folder
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
!server follow the guide please
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
TLauncher is known spyware and is also unable to install mods or modpacks correctly. Because we offer no support for piracy due to Discord TOS, you will need to provide proof you own a legitimate copy of Minecraft or leave the server. For a safe, working way to install both mods and modpacks, read the #faq guide on installing modpacks.
!aternos
We don't support Aternos nor can we assist you with using it for reasons listed below;
- You are unable to add / edit the mods to implement a fix that can be game changing at times.
- We are unable to control the updates of our packs on Aternos, nor ever will.
- The hosting is not strong enough to host our packs on there without it crashing every so often.
- We have other free methods that work much better than Aternos does. Run the !ws command and the !server command in #bots for more information on how to host a server for free.
stop using Radmin
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
what do you mean by "reenable"
thats not modified at all, we didnt change that
i dont think its even a vanilla feature though
let me try on a fresh vanilla install
yeah I was already told to go somewhere else for modified modpack
yeah its a vanilla feature
oh, i think it was added after 1.21.1
tried a fresh install for 1.21.4, it worked
trying a fresh install of 1.21.1, doesn't
yeah, was added in 1.21.2, sorry about that
Hello, I have a hosted server playing better MC but occasionally the server crashes, without error alerts in the log or debug or crash-report, it simply crashes and the log ends with these characters.
Does anyone happen to know the cause of this?
Please read the full contents of the #get-support channel for us to provide assistance.
Minecraft 1.20.1
Better MC v36
Luncher & Server CurseForge
the server crashes occasionally, I just started the modpack, it generated the world and I immediately went into a cave to mine and haven't come out yet.
logs : https://mclo.gs/iSWZBRF
Debug : https://mclo.gs/446sRe1
Uploaded latest.log from @surreal yacht to mclogs: https://mclo.gs/iSWZBRF
Uploaded debug.log from @surreal yacht to mclogs: https://mclo.gs/446sRe1
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Hands slot
Or hold them in your hand and right click
ty sm
My problem is on a server, the server is crashing regularly, the game itself is normal.
!server reinstall the server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
and follow the guide fully
hey guys i looked it up and couldnt find a solid answer that i could understand at least, i have tons of mimicream yet it does not seem to work with any of the items im trying to dupe
hey im playing on a pretty powerful macbook pro that can run the modpack on a multiplayer server perfectly, but crashes everytime I attempt to play on a singleplayer.
On that previous question it looks like it may just be disabled for use. Is there any way to turn on mini cream so it works on a crafting table
alexsmobs config
!macjdk
For Mac devices using Apple Silicon/arm (M1/M2/etc.) CPUs
There is an issue with Java 17.0.8 and newer where you may experience "A fatal error has been detected by the Java Runtime Environment", which can cause the Java runtime to crash under a variety of circumstances. To resolve this:
Mac:
- Go here and hover over the Download buttons until you see one with the option to install a .dmg file. If you have an M-series Mac, then make sure to install the ARM64 version of this file.
- Install ATLauncher and open it. For more information on how to install and use ATLauncher, run the
!alternatescommand in #bots. - Click "Settings" on the right
- Click "Java/Minecraft" at the top
- Set "Use Java Provided by Minecraft" to false by unchecking the checkbox
- Manually specify the following Java path in the text box to the left to the "Reset" button:
/Library/Java/JavaVirtualMachines/zulu-21.jdk/Contents/Home
This might be a big ask but I messed around with the setting and still nothing shows up on the crafting table. Note, I am on a server I own with a couple friends. Would I have to mess with it differently?
did you change it serverside?
Nope looking through files in bisect hosting, I do see a 1.22.9.jar file for Alexmobs
Would reinstalling that reset it to it on
you need to change it in the config folder
the alexs mobs config
its disabled in the modpack as its overpowered
Thank you
can someone please tell me hoe to get the fire drag egg to atch
or is there like a video for all the drag eggs
i ave 2 and i cnat figure them out
read the questbook ingame
can someone help me on how to apply Ancient tome books to my items in minecraft 1.16.5
if its a prot 5 ancient tome
you need an armor piece with prot 4
ohhh okay thank you so much!
so i would basiclly need the same enchantment but one lower? and could i apply it on a anvil?
My friend is on AT launcher, and I am on curseforge. Is there any way I could send him a custom modpack for him to download onto AT Launcher?
is there a way to restrict access to dimensions? i have better mc 1.20 and i'd like to space out the dimensions
click the export button
yes & yes
how to mount dragon he is fully grown but i cant ride him and cant put saddle on him
THANK YOU SO MUCH
why did you ask in 3 channels
i dont know what modpack you're playing now
so i cant really help lol
any inventory management for neoforge?
skyblock
then go to #better-mc-skyblock
i asked in 3 channles beacuse in skyblock no one is fast answering there
instead of asking in every channel
ask in the channel of the pack you're using cause it differs.
What mods are compatable with BMC4? need some cool additions if yall know any
depends what you're looking for
anybody know what kind of structure this is?
its from a youtube video with the pack
heres another image for reference
looks like this from the outside
its a structure from when dungeons arise
i found it its called a greenwood pub
is there any way i could find one save for flying around looking for it
Yeah, I tried that. I sent him the mod pack but I don't know how he'd download it to the AT Launcher
click import
how do i play with friends on BMC 1.20.1
!ws
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
thx
helow guys can someone give me a link with this game wiki ?
theres no wiki
only the ingame questbook
for bmc5 what are each inventory accessory slot for?
i have backpack, cape, gloves, pendant, 2 rings, lantern belt, but what about wrist, anklet, shoes, and face?
Um how much storage is it to download better MC
for some reason whenever i try to place a crafting table down or open one my game crashes, ive deleted and redownloaded and repaired the modpack but nothing changes, any idea on how to fix please? :(
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
- 1.20.1
- curseforge
- no changes to modpack
- v36
- it always crashes
- placing or opening crafting tables
Uploaded crash-2025-01-24_13.58.51-client.txt from @slow scarab to mclogs: https://mclo.gs/VjwHMe2
~60 mb
where do I give suggestions for betterMC?
#suggestions read pins
like 1gb
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Please read the full contents of the #get-support channel for us to provide assistance.
Uploaded latest.log from @abstract gull to mclogs: https://mclo.gs/kEWwJ81
!cracked do you own official mc
If you are using a cracked Minecraft launcher, we can not assist with your issue. In order to receive help, you need to switch to an approved launcher and provide proof you have purchased Minecraft. This is due to the terms of service and guideline agreements of both Mojang and Discord.
buy official minecraft. Tlauncher is illegal and has spyware
no minecraft, no modpack.
are the public servers still dpwn
we don't have official servers for bmc
so if the server is down its on the individual that runs the server?
it's not our server. find whoever runs it
Reason: TL is spyware and illegal. Appeal with proof once you own official minecraft
Moderator: @agile cradle


jssasec [611254220863176704]
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
^?
is there a way to raise the claim limit on the minimap?
with or without cheats
either one
open parties and claims mod config
in the config folder
Which version of Bettermc is the most fun? Im talking ton of adventures, bosses fights, fun mechanics
why is it grayed out??
go to the config folder
prolly bmc4
isnt that how you get to it?😓
modpack files -> config
probably not
okay thank youuu
Im a bit confused though since this is in like the actual local game files wouldnt it not actually work when I put it on a bisect server soon?
you'd need to change it in the config folder on the server
ohh okay i didnt know that even existed
ive never actually run a server before but im going to soon
i'm not a English native speaker, so sorry for my poor English, in betterMC 1.20.1 v36, when i use farmer's delight, i can't get chicken soup, it always give me cabbage rolls
this will happen when you enter the world for the second time
Howdy, keep crashing when trying to fire up the modpack. According to the hs_err_pid18728.log file its a SIGFPE error
- 1.20.1
- Error is appearing via both GDLauncher Carbon and ATLauncher
- no changes, happens in fresh installs
- v36
- Gets to the LUNAPIXEL screen then crashes
- Firing up the game apparently
Uploaded hs_err_pid14292.log from @sturdy flare to mclogs: https://mclo.gs/FbLCzvF
:warning: This is a hs_err_pid file.
These files may contain personal information such as your session token.
Mclogs automatically censors these files, so you should delete your original message now.
!linux
GLFW
- Download the latest GLFW library files from your distros official repositories. If you are on a slow updating distro (like Ubuntu), instead download the latest pre-built files from my repository at https://github.com/Frontear/glfw-libs/releases
- Add
-Dorg.lwjgl.glfw.libname=/path/to/fileto your launcher java arguments. An example of what this might look like is-Dorg.lwjgl.glfw.libname=/home/frontear/Downloads/libglfw.so.
OpenAL
- Download the latest OpenAL library files from your distros official repositories.
- Add
-Dorg.lwjgl.openal.libname=/usr/lib/libopenal.so(this path might be different depending on your distribution so please double check).
ok, how can i report a bug
say it here
well,that's it, when i use farmer's delight, i can't get chicken soup, it always give me cabbage rolls
exactly, this only happen in betterMC, if only use farmer's delight, it wouldn't happen
so, could anyone tell me what's going on? that's pretty weird
ohhhh, i found the way to avoid this
how do you find spawners quickly
is it normal when i have 32gb ram the game crashes when I load the world?
Please read the full contents of the #get-support channel for us to provide assistance.
any cool active servers for better mc eu?
is the Ice and Fire: Dragons mod compatioble with BMC4
because i added that and essential mod to the pack and it says an extra mod is incompatable and i doubt its essential mod
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
im currently on 34.5 in bmc4 i want to play the latest version but when i update i cant play in my world that has been created in 34.5. when i try t o join my world the game just crashes. can anyone help?
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
So I assigned a whitle to my dragon and it just dissapear????!!
How to get my dragon backk
AAAA
i solved the problem by installing it again on another instance. then i transferred my world to that instance and that worked.
i think the problem was with atlauncher not downloading copyrighted(?cant download) mods when updating an instance and not saying to manually download them. when i opened a new instance it showed up and i downloaded them. it works now.
Will Xareo's minimap get an update soon? I just updated XaeroPlus and now it says the minimap mod has to be version 25.0.0, while it's currently 24.7.1. I can't launch the game now
tech support
does anyone know which mod adds player heads visible through walls and also on Xaero's Map when the player is in your FTB party?
how long do graves last
you shouldnt update mods by themselves in modpacks, it has a high chance of breaking smt
so thats probably why
yo
Yeah, got it. I went in to the modpack itself and there was an alpha version 25.0.0 which I had to manually update to. So now it works.
What is the minimum/recomended server ram for bettermc4?
hi
!server it says here
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
Weird, I tried with 6 and it crashed
try more i guess
Yeah, Trying with 7
it might be because of smt else
worked
im trying to use the modrinth one, and I have downloaded all the mods from the mods link taht the game showed me the first time i launched it, but now when i try to launch it it says it crashed and gives me this error in the logs on modrinth: "org.spongepowered.asm.mixin.transformer.throwables.MixinTransformerError: An unexpected critical error was encountered"
then a bunch of stuff after that
what do i do
it crashes after it says "Dispatching CONSTRUCT" above the loading thing
it also says in thelogs that the suspected mod is fancy menu
can you get a priv sever so only you and your mates can join?
How does the soul stealing enchantmeent work?
My game crashes every time i try to launch it.
im on 1.20.1
v36 of the modpack
i didnt change anything, only isnatlled the mods it told me to install
im using modrinth
and this is the crash log: https://mclo.gs/VXGaJfM
Im updating the modpack, wish me luck lol
does anyone know why mending just doesn't work sometimes? like, half the time i'm trying to repair my tools or armor by holding them/wearing them and getting xp, it just adds it to my xp bar instead of fixing my gear. and yes, they all have mending, i'm wearing them/holding them, and they're not full durability.
you kill a mob which you want the soul of for a spawner and it has like 3% chance to drop the soul
doesnt work on every mob tho
search for soul in the JEI to see whihc ones
!server
Paid Method
We suggest renting a server from Bisect Hosting:
Approx. $10 - $25 a month depending on what plan you choose. You can also get 25% off with Code LunaPixel.
Go here and order a plan which fits you. We suggest 1GB per player but nothing lower than 4GB as the server needs at least 3GB to run.
Go to #server-hosting for more Info!
Free Method
To host a server on your own computer, read the selfhosting guide.
This guide goes over how to install, create, and launch a free Minecraft server on all operating systems (MacOS, Linux and Windows). The guide also guides you through installing Java and optimizing your server for better performance.
If you are installing one of our older modpacks, ignore the "README" file that is included in the serverpack files, as they have outdated information.
!ws or this
Our modpacks don't support any mods that add singleplayer hosting / world sharing because we already provide free world sharing. The 'Essential' mod is therefore incompatible.
To share your world using our own world hosting, click the 'Open to Lan' or 'Share World' button in the game menu when in a singleplayer world, and share the world.
It will give you an address, like magma-cube.mc.lunapixel.gg, which your friends can use to connect directly to your world as if it were a server!
We still highly suggest not to play through LAN as LAN is untested and unreliable. Using it will cause longterm damage to your world.
There is no reason to use LAN, as we support both paid and free methods of hosting a server the normal way.
hi i started playing betterminecraft 4 and it changed my skin to the default one, i tried changing on website and launcher and neither works. any solutions ??
My game crashes every time i try to launch it.
im on 1.20.1
v36 of the modpack
i didnt change anything, only isnatlled the mods it told me to install
im using modrinth
and this is the crash log: https://mclo.gs/VXGaJfM
!alternates
If this command was run in response to your question/issue, it is likely because switching away from the launcher you are currently using would fix your problem.
From our experience, the most stable launcher by far is ATLauncher, also known as ATL.
To install ATLauncher, do the following:
1. Go to https://atlauncher.com/download
2. Install and run the setup, then open the program.
3. Login to your Microsoft account that owns the Java Edition of Minecraft from the Accounts tab on the right. This process is 100% safe, as it goes directly through Microsoft. ATLauncher does not see your account credentials.
4. Go to the Packs tab on the right, then click "Curseforge" on the left.
5. Search the modpack you wish to download.
6. Click "New Instance". Click "Ok" on the opted out mods warning, then click "Open All" on the manual download screen.
7. Let the mods download, ATLauncher will grab them from your Downloads folder and automatically add them to the modpack.
8. Go to the Instances tab, and click "Play" on the modpack you downloaded. If you ever see an "Update" button on the instance, click it.
This video explains the process: https://youtu.be/xMYW1wMbmkM
To transfer your Curseforge world to ATLauncher, simply right click the modpack on Curseforge, or click the 3 dots, then click "Open Folder". Copy the Saves folder, then click "Open Folder" on ATLauncher and paste the Saves folder there. Do the same with the XaerosMinimap folder, or the Journeymap folder, to transfer over any waypoints you've created.
Because ATLauncher downloads the exact same files as Curseforge does, your world will be the exact same and you will be able to join the same servers. ATLauncher also works without an internet connection (after you've installed the modpack, of course), and does not have any bloat from Overwolf. You are free to uninstall both Overwolf and Curseforge with ATLauncher installed.
Hey all, I'm playing a modified version of Better MC and it loads fine until I try to create a new world and it loads for a bit before saying it was saving before closing the game, can anyone please help me figure this out?
Uploaded latest.log from @shy notch to mclogs: https://mclo.gs/M74mN35
its better to ask there since its modified
Ah! Thanks so much!
But wouldn’t that be against the guidelines…? I think it may be a ram issue but I have no clue how to allocate more stuff to the launcher which is why I came here
!fps this guide has steps on it iirc
Thanks! I’ll go pop a message into modded discussion just in case before checking that out’
anyone knows how to fix error 1 crash?
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
Hi do you how to open this portal ?
the blue bits are not obsidian so its not a valid formation
ok thanks
Okay I downloaded the ATlauncher thingy, what folder do I put it in?
Cause it keeps saying that it can’t write files in its current location
Oh wait I just had to stick it in the applications folder lol
alguem br ae?
i added essential mod and that happen how do i fix it ?
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
i want to play with the essentail mod and
@near egret ok i wanna add some extra mods
please read the reply
!modified
You are using a modified version of the modpack! This channel is only for unmodified versions that we provide. We cannot guarantee that the modpack works after you do modifications, so please go to #1061339968691257466 if you need help with an issue.
If this is a bug, please make sure to test it in an unmodified version before trying to report it.
Also, you can't play with Essential - it does what a lot of mods we already have do.
any public servers for this?
Anyone know how to fix issues with ATLauncher? Or how to check for incompatibilities?
It keeps starting the pack before immediately booting me out five seconds later :(
could you send us a log so we can check it out
!logs
To better assist with fixing your issue, we will need some logs:
-
Curseforge -> Right click the modpack instance -> Open Folder.
-
ATLauncher -> Click 'Open Folder' on the modpack instance.
-
MultiMC -> Select your instace and click 'Instance Folder' on the right.
-
** For servers** -> Open the folder containing your server files.
To find the latest.log file, navigate to the 'logs' folder.
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
To find a crash report, navigate to the 'crash-reports folder and find the most recent file after your crash occurred.
Once located, please upload the requested file here. If it fails, upload to https://mclo.gs/ and share the link here.
Uploaded latest.log from @shy notch to mclogs: https://mclo.gs/QYpKsly
unfortunately cuts off before anything relevant is logged
in the same folder there should be some other types of files
can you try uploading one of those
Sure! What am I looking for?
or see if there is any crash report or hs_Err_pid generated
the most recent file that ends in .tar.gz
or something like that
or .log.gz apparently
yeah
Uploaded 2025-01-24-5.log.gz from @shy notch to mclogs: https://mclo.gs/d8a3doV
oh they are all the same 
is there a hs_err_pid generated
To find the hs_err_pid.log file, simply look for the file name after opening the instance folder.
Remind me where that is?
it should have been in that folder but there were none generated
dont really know why it isnt working then sorry
i think people recommend prism launcher for mac users
I can't create any worlds, but the only additional mod I added was essential mod in my better minecraft folder's mods folder
!ea
The Essential mod is completely incompatible with all of our modpacks, and there's no reason to use it. All of our modpacks already come with built-in, free world hosting, by clicking the "Share World' button in the Open to LAN menu. You can learn more by typing !ws in the #bots channel. You can also run type !server in the same channel to learn how to properly host a server for better performance and more flexibility. In modpacks that aren't owned by us, you can use mods such as e4mc or WorldHost to host a server completely for free without Essential's many issues and crashes and the microtransactions that they constantly bother users with. To learn more about alternatives to the Essential mod, check out this website.
Let me try booting it up in normal curseforge
No dice.
Uploaded latest.log from @shy notch to mclogs: https://mclo.gs/GFtaSHr
Yes
It seems the issue is centered around EMF and CEM. Would it affect the modpack severely if I removed them?
Cause all the errors in getting mention those and optifine
!optifine
It is highly advised to not use Optifine, as it is very glitchy, will increase loading times to upwards of 10 minutes, and will decrease your FPS substantially. All Luna Pixel Studios modpacks come with shader support without Optifine via Oculus on Forge and Iris on Fabric. Optifine is also incompatible with all of our modpacks. The game will not launch with Optifine installed.
If you are interested in Optifine alternatives for your own gameplay, you can find a list here
Note that a majority of these mods are already included in our modpacks.
For an indepth explanation of why Optifine is bad, you can read this document created by Sodium's developer, Jellysquid.
…So I remove entity model features and texture features?
No… stop using optifine, it’s not needed or supported
I don’t plan on using shaders
Read the command
I’m not using optifine, it just mentions that in the error message. It says this;
[net.minecraft.server.packs.PathPackResources/]: Invalid path minecraft :optifine/cem/blueprint: trapped_chest_large/blueprint: trapped_chest_large . properties:
Etc etc
are villager trades/ rerolling them changed from vanilla>
trying to set up a trade hall
!moreinfo
- What Minecraft version are you using? (1.19.2, 1.20.1, ...)
- What launcher did you run Minecraft with? (e.g. CurseForge, ATLauncher, MultiMC, ...)
- Have you changed the modpack in any way? (e.g. changing mod versions, adding/removing mods)
- What version of the modpack are you using? (v11, v9, etc)
- Have you ever gotten past the crash condition without crashing, or does the game always crash?
- What steps cause the crash?
Required:
Open the game directory (right click pack -> open folder), navigate to the "crash-reports" folder and upload the latest available crash report.
If there is no crash report, navigate to the logs folder and upload "latest.log."
If there is no log, navigate to the base pack directory and upload the hs_err_pid file, if there is one.
- 20.1
- Curseforge
- I removed some mods but only because I didn’t want them, ie: medium core and blue skies since it was causing issues stuff like that
- v36
- No
- I booted it up as normal, added the resource packs I wanted, and tried to create a world then it said saving before crashing.
… why did you remove them
thats somethinf mod authors name the folders as for what i assume to be connected texture compatibility but doesn't actually mean that optifine is added
ill download the log and take a look since the mclogs upload id truncated
Thanks
No, and even if I could I wouldn’t be able to cause the stupid thing crashes before even getting to the world creation screen
BE_default_endgen_fix_1.20.x.zip can you try seeing if removing this helps
its either in config>paxi>datapacks or resourcepacks folder
or both
or move to somewehre
Gotcha

