#unofficial-setup-help
1 messages · Page 179 of 1
my friend did play Rag thou and singleplayer but should not matter when they suddenly falls throu the mesh
Whats the normal Rate of them?
im pretty sure thats an over spawn
its pretty high for that island and penguin palace
im pretty sure they are only meant to spawn on that iceberg in the water right?
with Babies i dont think so but idk
so 100 ish
try turn off Wild Baby spawns and do a Dinowipe
see if they still Overspawn even with that off
in a way i want some of these overspawns with 150 Argies etc on SE XD
or just random bugs in desert as of right now since X2 XD
1 shot boom chitin for days XD
Ok fun fact
There are no visible penguins on the island OR penguin palace.
tping to them pops me out the mesh
meaning you You are under the mesh ya?
Cant find a single penguin lol
go into the water you'll hear that noise and see them swimming everywhere lol
yeah they are down there, all 1000 of them
is what i thought, the Mesh Problem
Oh I have no doubt they are there lol
Penguins do Swim
Its the same old issue we shouldnt be shocked tbf
aye
if you have the ability to spawn limit them after you'll likely see the over spawn of a different dino.
So it seems like each map has a more common over spawn.
ones i know of that dev or other have seen
Ab - Reapers
EX - armadoggos
Center - Penuins
Val/Rag - Rhynios
Mod maps
Amissa - Karkinos
They are prolly swimming off and despawning, might be why I'm only at 1000 instead of 3000
dinos spawning in mesh and bc of failed Spawns it then spawns them again on repeat
brb i have a child to put to bed real quick (he hopes) lol
they wont want to hear about mod maps tbh, that will get put on the modder to fix
bc technically They should not exist by the games mechanics but undermesh check somehow fails just like how they mesh on PvP
sounds reasonable thought?
sumarize Out of bound spawns makes the game respawn
until cap has been reached, imo lazy coding bc it doesnt check propertly
it seems to be a large region that extends in below the mesh. They need to get outside of it to despawn properly.
The despawn radius is bigger than the region that looks for the dino.
just 15 min in and can't say it looks out of the ordinary
and the reason this isint occuring on Officials that much is we keep killing off them frequently so its not that noticable
Nice Server lag 😄 for me now LOL
Try move around and keep some areas loading/unloading
New data point:
hanging out in penguin palace has increased the spawn to 1600 floppy birbs
So yeah we can call that like it is
fair, i was afk at the foot of volcano
might be why
Imma just quietly do that wild dino wipe and get the heck outta there
it could be any spawn which makes this hard to catch, you see 400 coel thats fine, 1600 maguena (flys) thats fine but 300 microraptors is an issue
in one place
its tough when its a spawn you arent familiar with which is whats taken me so long to confirm this
not in one place, but in its spawn.
so giga has like 3 spawns on island right? the 100+ would all be in those spawns
i sent u my numbers, will be back in a bit and do wipe again and TP between ob in 3min intervals
the80 rhynios were all in swamps, so its not changing the locations just increase the dino spawn quanity
holy moses I hope not
Ya same, would be Overkill for sure ^^ 1 giga can be an issue wild, 33 in on spot mateboosted Yikes
Tiago sent me there numbers and seem fine there side :/ i cant see how id have the same issue on 3 different rigs all fresh installs for testing
hang out in a spawn spot and then look for titanosaur, carchar and giga spawns, since they share that container.
so its doesnt work like that in my testing.
- dino wipe
- game picks a dino and starts spawning it
- once map gets closer to its 50-100% population and obvious dino would have randomly been picked for overspawning
or are they just balanced against each other these days? I forget. I just know farming those gets gigas to spawn.
nah thats not it, its definitely a bug im experiencing i'll have to clip it and share my results to the group and see who else can see the same issue
yeah I'm curious if you can share a listdino txt on this. Would be interesting to say the least.
where do i get this list? i'll do so now
from the admin command line:
Cheat listdinos
This should put the output into your clipboard, you can then paste it in notepad.
You can hit the ~ a second time to see the output in your admin command output.
sorry, currently not home but using remote access, was hoping RCON was going to give me the list but i'll have to put a pin in this until im home
Its no worries. Just something that helps make things clearer for others.
Do yall reboot your servers on any kind of interval or just when there is an update available?
Daily
Selfhost can wait for a days before needing a reboot tho.
I have been doing daily since launch but was curious if we still needed to or if they had fixed memory management since then.
I self host on my own hardware.
Do officials reboot on any kind of schedule?
Thanks!
@compact saffron u there
I do daily too unless I shut the server machine off. also self host
Anyone know of any mods that improve the CPU usage of the game on PC? Could be server side or client side.
i was going through tiagos log they sent me last night and at first it all looked fine but even they have an overspawn of dimorphidons on the island. they have close to 1000 and the map wasnt fully populated yet. I'm sure there is something to this rabbit hole im climbing in
just weird that if it's a dimorph overspawn, it never shifted to a nother species
can you enable the spawn blocker mod and limit the spawns to 120 and then dino wipe and see what else spawns?
mine didnt always switch speices
it just seems to be a common one like 8/10 times per maps
so ive limited all my wild dinos to official rates (where they should be)
i now have an over spawn of alpha rexs lol like this .... is dumb
im going to put in a bug report with wildcard if others can bump it once ive posted id appreciate it
im also happy to look through your dinolists and pin point your over spawns if that'll help convince you im not crazy 😂
I can try
https://survivetheark.com/index.php?/bugs/unofficial-any-dino-overspawn-r99759/
if Players are happy to bump that this is happening to them or have experienced overspawn i would be grateful
i need help, when i join a server it kick me and say: you have been kicked by BattlEye. Reason 'Bad Service Version'
hi guys i'm searching for help, i played on a nitrado server for 2 months and now i try to transfer it to my pc, but when i launch the server everything is right except that i have to create a new character, i checked and all the structures and characters are here it just seem to not make the link, if anyone could help me, even in private, pls
cluster ID
i have to change it ?
or just put the same as on the nitrado server?
Try launching the game with -usestore
Ok i'll try i will tell you ty
Hello I’m new and I have ark on epic games and I want to rent a server for me and my friends. My friends all have ark on steam. Can we all play together on that same server even though I’m on epic games and they’re on steam?
Does anyone know how to disable max turrets placed? Im on ASE
anyone know why no servers pop up on the unofficial side?
Check your filters
I used dino storage back in the ase days. The one part that I miss was being able to search for new mutations NOT via level. Let's say my mutations were 17/20 on my male. Any more mutation would be 18/20 from the alpha or 1/20 from base females (assuming no 2x or 3x mutations). I could search "paternal: 18" or "maternal: 1" and find new mutations. I love collecting every color. lol
I currently use Super Cryo Storage. I was wondering, are there were any other baby dino trap mods (I don't use item generation, egg collection, or egg incubation) that allow me to search for mutation amounts?
Thank you
ase yes but can't have mods. asa is fully crossplay on dedi servers vanilla or modded
@autumn hornet
Is there an issue with the white flag mod 💔
hey guys i have a problem to create a host to play with my friend i check a lot of vidéo about that but it doesnt work somoene can help me quickly plz ?
would someone who is potentially more fluent in steamcmd than i am have a few minute to spare to assist me or provide some advice for me?
in the event there is (doubtful) i have googled my arse off trying to find solutions for data leaks and garbage collection fixes. i host a small cluster that i manage purely through steamcmd. astraeos is my main map which runs at 8-18gb and does GC frequently causing lag/rubberbanding. which i have slowed with the collection rate. mods? yes. i run a few. not many at all. i am fairly new to steamcmd, the very first time i dealt with it was palworld. now ark. i have no idea what i am doing. google has helped a little, however. personal experience is where it is all at. that is why i ask for assistance here.
Hi, I’m just about to start playing modded ark I am thinking of playing ark supreme but I’m stuck on what setting I should set for my server. I want it to be fun and enjoyable where I don’t want the game to take hours to breed and tame things but not overpowered where I finish the game incredibly fast. If anyone could help me that would be great thanks
Hey everyone,
I'm trying to modify only the Blue Supply Drops on Scorched Earth. However, every time I change the settings in my Game.ini, it seems to override all the other drops as well (or changes them on all maps).
Could someone please show me the correct ConfigOverrideSupplyCrateItems syntax specifically for the Blue Drops on Scorched Earth? I want to make sure I'm only targeting that exact crate type without breaking the rest.
Thanks in advance for the help!
hello everyone i would like to know why did my server lose all there loot it says theres 150 items in the box but theres none when i open it
i did a roll back however it didnt work i didnt remove any mods at that time
guys i need some help does anyone know how get your original save file when you over write it with one of the backup saves in ascended
I've never had this happen, why would cloned tames not be able to breed when they're not neutered?
Hi, I have a problem and I'd like to know if anyone can help me. I can't access my local hosts file; it simply won't let me. It either kicks me out of the game or says the DLC isn't installed when it is.I play on Xbox Series S
SupplyCrate_Level30_ScorchedEarth_C is what you need for Blue drops on SE. will also change I think Ast, Rag & Val drops as they reused SE drops for those maps. so if you want only SE, you need a specific game ini for SE
correction it's only for SE, Rag & Val, not Astreos
Oh thanks for your help but I mean when I change it all colors will change not on all maps. I changed the blue drop and the green, yellow and purple also changed 🤔🙄
I need help i lost my char and i dont know the implant number
An admin on ur server should be able to get ur implant number for u
Is anyone having issues with certain maps such as loading in and crashing every 20 seconds ?
@high oak
So what u doing talking on unofficial
Is Small
Since March 3rd, we’ve been experiencing issues with items, inventories, dinos, and structures disappearing on our cluster. Every day, you can read here that more and more clusters are encountering this problem. Why is nothing being done about it?
By “we,” I mean several different clusters. We’ve submitted support tickets, but they’ve gone unanswered for two (!!) months. Here on Discord, @dooly at least tried to listen to us, but even there many people didn’t get any response, or were simply told, “It’s just a bug” or that we should wipe (which has demonstrably not helped).
Why are we being left like this? So many clusters have already lost players, and people are losing interest in Ark itself!
even tried totally fresh everything, still happens. even with the saving suggestion of waiting 20 minutes before rebooting
its absolutely insane that there have been at least 20+ different clusters try to bring attention to this and how there tickets are not being acknowledged and there has been absolutely nothing from developers on it
🤣, I guess dollie asking for save files and other info is devs doing absolutely nothing #unofficial-setup-help message
its all been sent
people losing thousands of hours of progress totally funny laugh it up.
The funny part is you people lying saying devs have done nothing, them asking for saves and other info is them doing something
brother everything has been submitted to them by multiple different server owners and not a single person has even gotten a message back saying they acknowledge and are looking into it
how many months after submitting is it appropriate to ask if its being looked at? every time we ask, were met with asking to send it in again, what about what we have already sent?
btw this does seem to help. Not sure if you have tried it.
Official is always going to take priority at the end of the day.
rolled back 6 whole months with the suggested and bug reappears
I suppose though the additional questions to ask would be those cluster configurations? Are you using the "new" save format or the old save format. Do you use the vanilla decay system or a third party api decay. I'm self hosted with my cluster so i don't use the vanilla decay, new save or vanilla transfer setups. Nitrado you are at the behest of their architecture and limited configuration of course but there's not another option short of self host or VPS like services. My main problem tends to be character disappearances when transferring when it fails to write the character profile to the save directory. Doesn't happen often enough to be problematic of having a sea of tickets. All of the issues you describe I would think are a construct of the sqllite functions being used for save data. It's not nearly as robust as using a full sql engine to handle it all but for things like world saves in a constrained container like a game to not need external support it's what we're working with.
Now, as for addressing missing characters If self hosted you can sync the .arkprofile file type to all directories on a change but sometimes it's the profile itself that corrupts and can't be read by the game. In that case you have no choice but to pull from a backup. I make archival backups once an hour for a retention period of a week along with inventory snapshots using the Inventory Backup System mod I commissioned Joe Help to port over from ASE on launch.
While I realize this is likely not what you want to hear I feel most of these problems stem from a configuration issue inherent the the save file design and available backend architecture most of the community and official presently uses.
nitrado hosted
@lean ore still dealing with the inventory bug as well?
Whats your start time set at?
If the server isnt fully stopping, it reoccurs.
Per my linked suggestion, this does help. Skipping that step guarantees it reoccurs.
As sad as it is, but yes
this bug occurs before the server restarts, while it is running. it doesnt show up until after the server restarts. Servers will be online and running fine, we have a monitor on the file to detect large changes in size, it will detect a large data loss, then the next time it resets, all the data is missing. The data loss can occur multiple days before a restart shows its effect
that's so weird. are you doing them by hand?
had it set up so that when data loss was detected we would know how far to roll back and trigger the rollback sooner so there was less wasted time and loss for players. but the bug happens quickly every time, essentially progress is impossible.
Correct.
You are describing the corruption resulting from incomplete shutdown.
Anyway, if you do not wish to even TRY my suggestion, then I wish you luck.
Haha no we changed the loot drops via the .ini file.. It actually works perfectly fine on every other map but for some reason Scorched Earth decides to change every single drop color instead of just the blue ones 😂
im not the server owner, im a player. the information has been passed on when first suggested a while back, it has been applied as to my knowledge. It is still occuring. but i feel the official solution to a problem of this magnitude should not be to impose a 30 minute wait after every server crash when crashes happen multiple times a day per map. not exactly a great user experience. are they working on a true fix?
Crashes are not daily restarts.
I think we are talking apples and oranges.
@obsidian jewel you sure its 19800 Quality for officials? somehow my drops are out of league
the cap
What cap
124% max cap
I’m confusion
oh my bad that was Pumpkin sorry
@bleak ivy something is wrong with me Quality in my drops On my unofficial server, what got messed up?
my appologizes i got you two mixed up
😂🤣
i remember talking to you and him on different days my mind somehow chose you XD
somehow my Drops either way got Insanely messed up, Ascendant Drops in White drop, example Hyenadon Meatpack Asc in a reg white
@smoky burrow did adding extra time before restart fix your data corruption issues?
Thats not the full fix. Its only a part of it.
please share with the class, bc you keep tagging that in every mention of the problem like its the fix
Its linked above
Heres the jist
Reinstall the game server
Apply a save from before the issue occurred
Use a scheduled stop with a measured startup INSTEAD of a daily restart. Ensure the server is FULLY STOPPED before sending the startup.
I wish I had the ability to pin
If you have further questions let me know.
It is preventable.
I recovered and prevented this from reoccurring on 3 of my servers so far using these steps.
probably SupplyCrateLootQualityMultiplier or difficultyoffset
First one, whats official setting for that if you know?
offset is 1.0 on officials. the override is 5
I imagine 1 but no idea tbh
Aye is what i meant i will compare to my settings tomorrow
Was told to ask for assistance on this issue here, but the unofficial server cluster I've been playing on seems to be having the same issue with transferring that the official clusters had yesterday. Some info:
- It seems to be the same issue of users on the unofficial server transferring and then having their character data/information decoupled/missing after the transfer. This leads to their body being present in the world on the server, but their client says they need to make a new character.
- Unofficial server admins have been able to manually restore the data, but this is the second time in 2 days its happened (and fourth in a month)
- The first issue happened sometime in April, with a player's information that wasn't me on the cluster. (Unsure exactly when this occurred)
- The second issue happened with my character on the server, around the same time the transfer issues started on 4/24/2026, the ones that required transfers being shut off. (Unsure exactly when it occurred other than it being the same day)
- The third issue happened with my character again, last night (before the first official post was made on the transfer issues) (Occurred at 5:30 PM EST on May 17th)
- the fourth issue happened with someone else's character today, after the transfer issue is supposed to be resolved. (occurred at 6:36 PM EST on May 18th)
All four issues were the same problem. Character was still in the world after a transfer but upon logging in, said there was no character available. 2 of the issues were for me, 1 was for another player, and the most recent was for a different player.
This seems to be on going issue and the exact same issue that is mentioned in #status-updates . Is there anything we can do for unofficial servers to mitigate this, or is a WC related fix needed to fix this for unofficial servers?
All issues occurred the same way. Character was not recognized and each player was told to make a new character. Same Cluster, different maps.
I get about 3 of these a month since 2020.
Does anyone know a good server host that is not nintrado for the U.S
nitrado is the only official server host for ASA. none of the others have permission to do so.
self-host is also an option if you have a spare PC
Well I am just worried about exposing my personal info. I honestly dont know too much.
I see alot more than just nintrado
yeah, but I would not use them 
So the only true option is self hosting?
renting a bare machine to self-host on is also an option. not sure on the price of that tho.
yeah, but its just a private server hosted on my PC
at most 3 people on it.
Is it safe to do so?
what do you mean safe? like port-forwarding?
as long as you do it right yeah lol.
My friend bought a pc and we wanted to play a server with the ps5 friends. is this impossible without nitrado? i remember there used to be an option to use a platform as a server and everyone could join?
You can run a dedicated server and port forward like D3solate does, single instance, rent a bare metal machine using a VPS service and set that up. GTX Gaming is kind of a hybrid VPS gaming service. Or use a spare machine for running servers. IF you really want to get into it then build a dedicated high spec rig for doing so. Just depends on your pocket book and time you want to spend on it.
If i want to host a cluster myself using a new pc i purchase, do you only need a ton of RAM if you intend to play on the pc at the same time? Or could i like run 5-6 maps on that pc, then just sign onto my xbox or something and join and be fine?
5-6 maps would be a lot of ram
each server should have at least 16GB but some will require more. and the amount of players will make it require more too
No, we still have some losses, feel like helping a little, but that's probably just wishful thinking.
Nothing helps if the cause is the saving itself...
As to why this seems to be creeping or selectively happening, we don't have enough information/insight to know, but provided a couple clusters' saves to WC (again) for them to take a serious look.
https://survivetheark.com/index.php?/bugs/faulty-inventory-saving-r99644/&_fromLogin=1
I hear your workaround worked for you, DoolySaurus, but I want to drive for a solution instead of a workaround if WC can spend some valuable time on this at some point. Rootcausing and preventing what's messed up here would also give us more trust in that being long term stable and not exploding again.
First corruption occurred around March 08.
A rollback to then is as helpful as a full-wipe, but less reliable. And I don't trust it to be a robustness guarantee.
Man ive got no idea how to just play this game then
I just want my own forever arks without the annoying single player spawn issues
just host 1-2 maps. have one be the "main" where its always on and the other goes between any other map you want to play.
64 GB can get you to play on your own 1-2 maps, potentially 3-4 if you play externally, but mods, players, structure and dino populations will add up to eating more and more RAM
If i want to swap between maps does it wipe all the structures and everything?
no, each map has its own folder for everything.
except mod maps which use the island folder but for those just have different server downloads to run, or move the files manually for backing up tribe and survivor data.
Cause like i could have astraeus as my main. Then say i build a base on scorched, then swap to aberation after a while but maybe i want to go back to scorched
then you just switch the map back.
everything there will still be there, paused when it shutdown.
Oh the server is only there to have it live? Oh wow cause like i dont technically even need my maps running when im not playing. I just wanted to solves the single player jank
self-host will only remove saves when you do it manually, it corrupts (would suggest backing up whenever you transfer), or a update causes an issue which are rare.
I see
think of it just like singleplayer. if nothing is running the map, everything is paused.
exception being the cloud data which does decay when off
you can change how long it takes. not sure if there is a max or if it can just be disabled, never tried
Oh well see thats just fine then. I just want to have a main map and a secondary one at moat and not loose all my work ive done. Id still have to upload a milltion creatures i guess but at least i could still have my base and evwrything i leave there inccluding tames i dont need to bring over
and you'll have access to transferring which brings over your inventory 
instead of singleplayer's upload/download which drops it
Ill have to figure out how swapping maps and atuff works with severs once i actually get acess to experiment with it. Dont have a pc yet
Maybe i could rent in the meantime and swap to my own pc to host laterp
its very simple. you just replace the map name with a different one in the bat file.
I just have a bunch sitting on my desktop ready to be opened 
Oh ok great! Thanks much appreciated i hope o can get that all working i really love this game its just always felt so temporary
It is very far from temporary, I wish you luck on this extremely long and enjoyable journey! 😄
Only real issue to note is transferring can sometimes break, but it's uncommon. Always backup your world directory before transferring in case you must rollback, but otherwise smooth sailing
Hey all, i'd really appreciate if we could all leave a comment to draw this issue to WildCards attention.
I was able to confirm with 3 other clusters that they have Overspawns that aren't immediately obvious but are serious problems for our performance and balance.
I spent a week solid working on this with Developers too so the research has been done and confirmed
https://survivetheark.com/index.php?/bugs/unofficial-any-dino-overspawn-r99759/
Anyone know what the requirements are to run one map if I hosted it myself?
Wiki has exact specs, but typically 16gb ram and a semi decent processor
Ddr5 ram? Or ddr4
Either, obvs ddr5 would be better
I see. Ty ty
hello, i might need some help with my modded ark, its on ASE but im using dinostorage and ark additions and im playing on aberration for some reason i cant uncryo my aberrant deinos
my friend runs the server but they tried setting , CrossARKAllowForeignDinoDownloads=True but it always turns false once the servers up, were using nitrado
They turning the server off, waiting till it's fully shutdown before making the change
ohh alright
has there been a REAL fix found for foliage flickering?
i come back after another fews months and its STILL broken.
Not saying its 100% related, but do you run the cloud or fog commands?
I only see it when i remove weather effects.
no im on a 5090 so i have everything maxed
so no commands either
Oh thats news.
We see it on console after running weather commands lol.
I dont see it if I leave it alone.
its been like this since launch sometimes it just does it and wont fix unless you reinstall or run 7000 commands and make the game looks ass
even with the standards of ue5 this game is something else. Its getting on my nerves because it hasn't been fixed. UE5.5 killed high end systems so i stopped playing when that came out for a lil. The last 2 weeks I've been back i keep seeing it. If it just a small issue it would be fine but its such an abrasive issue that cant be walked passed without noticing.
i tried, its stil broken
it says class disallowed with the cryopod and foreign class for the dinostorage
Anyone had the issue where u log in and ur dead and ur base has been wiped?
has ase mod support been fixed?
i cant deal with this foliage flickering i stg
i know aquatica broke it so im just wondering
Guys after the last update my dedicated server stopped working any help?
Hi guys, I have not been able to get my holiday skins folder on my character - in fact its now been gone for a few weeks. I've tried all the usual fixes - diabling skins / enabling etc. Nothing. I try opening tickets but they get deleted as completed instantly. I'm at a loss - this is hundreds of hours of game play reward...gone? can anyone help?
try turning the event mod back on, getting back your skins via commands, then turning the event mod to passive. They didn't finsih moving the event mod stuff to base game. this advice works best if you're admin on the server and have access to mods, or can ask the admins to this
like you can add mods to the game type access
Thanks for this - im not sure how to do this tho, my character is on small tribes
(I turned off the easter event, and lost the garden skins, but not last year's skins)
I tried unstalling the event add ons and then redownloading them but still no success
if it's officials, it won;t work
they should have the rest of the easter stuff in the major version they're doing soonish?
unofficials have a bit more leeway in running events
Ok thankyou my friend, I will hold out hope
.
Guys I wanted to thank everyone for the help yesterday with the server, if you need a good host or help with worldbuilder custom caves I'm happy to help
Is anyone else having an issue where vaults are empty post-update? On every map. All structure storages (repis, fabis) empty for all players. Dedi's not included
make sure its not the filter at the bottom
Multiple players report no dice.
mods? 
None
does anyone know why after every other major update, the map i'm playing gets nuked and refuses to start unless i just wipe the folder (which should be obious as to why it's not a solution for me)
are you single player or using a server?
home server
I'm not sure, I use nitrado and had to wipe my servers today too. D:
Anyone on here know a lot about running and setting up a dedicated server or ark survival evolved I just purchased one and having a hard time setting things up
Which server host are you using? I can help you. I set up my own servers.
Ms low
What exactly are you needing help with? The server settings, mods?
Raising multiplier for mature rate imprinting n hatching
So, your best bet is to download a program called Beacon and use the breeding multiplier section to set that up. It's very easy to use.
Ok
Let me know if you need any help with Beacon. It's pretty straight forward and has different sections for different settings.
Now does that plug the multiplier straight into the server when I set it in beacon
Best to join the Beacon discord and they have good tutorials
So, what I recommend, is going through each setting on beacon and setting it up exactly how you want - then, when you're done, press the export button. It will have all the settings ready to copy for you to paste into your server config file. There will be two - one for Game.INI and one for GameUserSettings.ini
Thanks will do
Yeah, you can watch some videos too.
Ok thank you for the help me my buddy flew blind into this lol
No problem, if you need anymore help just DM me.
Will do
I am having to wipe my 2+ year old cluster because of the bug that's yet to be fixed. Pretty ridiculous.
Thanks Wildcard.
has anyone figured out an issue to constant corruption in a map? our astraeos map has had like 5 corruptions and we’ve needed to do a roll back each time 😵💫
So nobody else is seeing structure storage issues (where everything is hidden, but still there. Adding an item wipes the inventory and starts it working correctly; at least for turrets)? This does not apply to player inventories, tame inventories, or dedicated storages (since they're technically not "storage" boxes).
I'm seeing my save size get cut to 1/3r'd the pre-update size.
yhes it is the same issue we're all facing
Storages? I thought everyone was complaining their map saves were corrupted and unusable, not just storages being emptied due to the patch
Is anyone else having trouble loading into the Astraeos map on PC (Xbox App / Windows Store version)? Everything was working perfectly yesterday, but today the game constantly crashes during the loading screen with a LowLevelFatalError in AsyncLoading2.cpp (Bad name index for creature blueprints like ScorpionKing).
You’ll find that every time your servers gets restarted all of your storages will be deleted. That’s the corruption bug
whats causing the corruptions? is it only in servers or something?
Also creating new save is not working (single player)
An update in March that was “supposed to fix corruption problems” that wasn’t even happening
This is the first time I've experienced the storage issue. I had the bases issue, and I randomly have the corruption issue, but those are resolved usually with waiting for wildcard and restoring backups, not having to wipe.
It’s gonna happen every restart now. Gets to a point you’re rolling back 3-5x a week. To the point you’re forced to fully wipe and restart in hopes you don’t catch the bug. There’s a whole discord of server owners who have had this problem for 3 months now. There is no waiting for wildcard it’s been begged and plead in this chat for months now and a lot of people have gave up
What you're saying makes sense; but I'd like to add that I tried a save from a few weeks ago on today's server build and saw the same issue.
If wildcard reufses to acknowledge the issue, then I'll have to try to manually transfer the items from one save to the new "corrupted" ones
We’ve tried all of that
Loaded old save, still happened when server went down. Opened a copy of old save and allowed them to take missing items to the one that lost them. Lost it all next restart
same bug broskie.
I'm wondering who is profiting from this? Hmmmm follow the money.
ok so im trying to transfer some dinosaurs over from my none dedicated server to a friends. but only rapors argys and taps seem to work for scorched. i tried yuty rex mana even drakeling and none worked. bug or is it something in the maps codes?
Would yall know what mods are causing restart loops
Anyone an issue having with ark freezing in menu
I might try renting a server for a month for the mean time and moved my save files over to a PC to self host. Seems possible even for a noob
Id have to redo all the settings and mods from scratch though since i play on xbox, oof means id have to double buy the few premiums ones too
is it mods or ur file is corrupted?
I’m with nitrado now. And they can’t figure it out
It’s running but won’t show up in my server list in game. He’s switched IPs and ports. Removed mods. Nothing is working
Does anyone know of a good server with pve crossplatform no wipe and it has good settings i want to play with my friend but he plays on ps5 and i play on pc PLEASE SOMEONE HELP!!
look through #1110925695900713072
this is for setup help and other dedicated server issues and singleplayer 
Does anyone Know how to port forward so my friends can join my unofficial server to play with me??? I need help so badd
It keeps saying connection failed or failed to join, and ive tried everything
if i rent a nitrado server, i can see they have its own mod list but how does this work for premium mods. I have a couple structure skins and a creature. Does it just work?
If i have a friend join id like for him to be able to see my structure skins
Not showing on server list tends to be certs or wrong filters
You dont have to pay for prem mods on servers, only the clients pay for the mods if thats what your on about paying double for
I set up a pve xbox/windows CI server. In need of experienced players that would love to help build it up more (CC and what not) and check out if the setting are nice and playerfriendly. I very much s*ck at building lol
Whats the best place to go advertice for that. Sorry for my crappy English. I am from Holland and just freestyling the tekst here 😝
I can help you tomorrow, I'm from Brazil and it's already late here.
That would be awesome. Its 09.30 in the morning here lol
Just send me a pm wenn iyou can. I hope i will be awake by then lol
Im down to help you out do u have a discord server or anything im in america
Can you send me a DM so I don't forget?
Nice yeah let me set you a pm aswell
Yesterday I bought the new DLC with the animal rabbit, but due to the terrible and glitchy localization into other languages, half the game doesn't work correctly. This is simply disgusting treatment of people. I personally have dyslexia, and I will never be able to learn English properly. Now, to write this, I use a translator! You are a huge company that apparently simply ran the game's text through the cheapest—or maybe even free—terrible machine translator. This is absolutely disgraceful
Anyone have the wiki for server requirements? Or know what it’s under I can’t seem to find it
Hey guys since the latest update my server has jumped form 10x to 50x but after check ini and obvious places I still cant find a fix. Picking up a rock on the beach normally yields 10 but atm its 50😩
Does anyone know where I can currently report a bug as our unofficial server we installed a few Paleo creatures mod for example the Apex Predators one and I go to convert a old Rex or Giga into the paleo one and I go convert a old vanilla saddle in inventory and it doesn’t convert to the paleo saddle I’m on PS5 just a curious question do u have to have the primitive saddles unlock for u to convert them into the paleo versions or do u have to tame one in the wild first to able to convert the saddles just a bit confused that’s all
I would maybe recommend looking for the paleo discord and ask there. Unless someone here knows. I think if this is an issue it is more mod related than base game related
Do u know what’s that discord is called please but I figured it out I needed to tame a wild one first before converting the saddle I’ll delete both of these messages now if it’s not relevant to keep here
You might find it on the curseforge of the mod
Ohh ok thanks
This is because you have dupe protection enabled.
Disable this, per the mod requirements and the ability to convert saddles will return.
\
We are hosting an 11 Map private server with roughly 150 players, 15k structure limit and 150 tame limit +~15 mods. we are paying about 500€ monthly and servers are still laggy.
What are you guys paying and are they running smooth ?
just using my pc for myself 
I can't get into servers with mods, can someone help me
I use Nitrado and I got 60 mods on my server with no lag. Only downside is you can't use API plugins.
Hello! I'm trying to build a platform on the lava pool in front of the Tek cave entrance. I think I have the correct setting to allow this but I still can't build on the pool. I use Nitrado for my server.
Are you trying to have floating structure over the top of it?
I think so. It’s so I can put Dino’s on it. Every tek cave video I’ve watched has shown this strategy.
Do you have AllowCaveBuildingPvE=True in your gameusersettings.ini?
Might consider the volcano as a cave.
And there's one more setting lemme check
usually its the same for allow building in caves:
AllowCaveBuildingPvE=True
AllowCaveBuildingPvP=True
EnableExtraStructurePreventionVolumes=False
bDisableStructurePlacementCollision=True
bIgnoreStructuresPreventionVolumes=True
both pve and pvp need to be set regardless of the mode you are running
I will log in real quick.
I'm not seeing those specific settings in the config area.
Config area?
These are ini settings
They are under GameUserSettings.ini and Game.ini
If you dont see them add them
lemme double check
These are in the game.ini
bDisableStructurePlacementCollision=True
bIgnoreStructuresPreventionVolumes=True
yeah what he said
The others are under the gameusersettings
If you get stuck, all settings are listed here and you can double check them yourself: https://ark.wiki.gg/wiki/Server_configuration
I'm trying to send a screen shot of where i'm looking but I don't think I can
Which server host are you using?
Nitrado
Settings > config files is where you find the ini files
^^
🙂 That's where i am
be sure the server is fully stopped before you mess with them
Yeah, and there's a drop down menu for Game.ini and GameUserSettings.ini - if you don't see the settings in Game.ini or GameUserSettings.ini you can add them
Ah finally finding the area. You guys are being so patient with me. I appreciate you both so much.
These settings go under [server settings] in GameUserSettings.ini
AllowCaveBuildingPvE=True
AllowCaveBuildingPvP=True
EnableExtraStructurePreventionVolumes=False
These go at the bottom of Game.ini
bDisableStructurePlacementCollision=True
bIgnoreStructuresPreventionVolumes=True
then save, restart ur server, and test it out
Be sure you arent placing anything under
[ShooterGameMode_TEMPOverrides]
It should go above that. Never put anything under it.
yeah true
Okay, I just put them in and am restarting the server.
nice i hope it works!
Thank you. I will let you guys know... have to update.
kk ^_^
any previous cluster owners wanting a spot on an upcoming server? must be known & experience.
@zealous aurora dm'ing you another example of the server corruption ppl are experiencing.
Since you are mentioning server corruption... I can no longer get into my server after making those setting recommendations.
Was the server stopped when you made the changes?
Also, looks like you are win10? Theres an update out concerning an inability to connect via Win10.
Yes I did. I hope you are right... i"ve gone through so many nitrado suggestions. I'm sick to my stomch. I was just trying to help my server and I think I screwed everything up.
Is it just you having the issue connecting or do other players have the issue?
Good question. Let me log on to my hubby's pc. It' will take a minute
Some on our server are still having issues with a couple of the maps too.. guess it’s issues with Rag and lost colony
Not my server btw just one I play on
Yea think people are on some of the other maps are doing fine but not those two maps lol. Guess it says their character is playing but they can’t even get into the map
Other players on the server as well. I get a Lost/timedout connection to host. I had a different error before, I restored a backup and this is the error I get now.
So maybe it is a windows issue... that would be better than the file being corrupt
I didn't see any crashtack.log files in the saved logs
also getting a lost/timedout error for my 2/3 day old server
was working fine last night and hasnt worked at any point today for any of the players
You are making me feel so much better. I looked at so many different things. I am new to PC gaming and learning the hard way.
Yea I think it’s an issue with Ark
Please excuse the machine translation.
I'm currently playing on an unofficial server with friends on ASE, and I want to remove the level cap of 88 for tamed dinosaurs. Is there a good way to do this?
search for dubba.pl in google, there's a toll for that
Thanks for recommending such a great tool!
I couldn't find much useful information when I searched in Japanese, so this really helped me out.
Yea I think the unofficial servers not working is from the update last night is what I heard.
antone else having issues with servers not showing since update? all versions and networking are correct no changes. a few players are on but multiple people including myself (the owner) are not seeing any.
Most not be able to join them
My client and a few others are showing servers v86.xx but none v87.xx so I think its a steam not updating the game. I am validating to check if it catches it.
Yea think it was from the update that caused the issue
And who knows when it will be fixed I doubt tonight at this rate since it hasn’t even been acknowledged by Nitardo
Is this a asa only server or ase to?
Anyone having timeout trouble loading into a private server?
Because it was working last night but it’s just timing me out today
Self
try a reboot of the machine
I’ve updated it and even ran a backup save but still just timing me out
doublecheck ports are correct, and firewall isn't being stupid
sometimes the firewall on windows thinks a new version number is a new program
or windows decides to change things
also restarting the client machine
I don’t know how to check my firewall
ahhh
and you've rebooted the machine the server runs on? the actual hardware? not just stopped the ark server software and restarted?
bc sometimes literally turning it off and on again makes things behave
Like turn off my computer
yep
Yes several times
okay
Also stopped and restarted my server but just keeps timing me out
Any ideas of how to fix it?
what I said above was all I know, it might be a console issue? bc I play steam
Even my friend on steam can’t join it
yes, A LOT of people are
Same, I'm all out of tacos. This is a genuine disaster.
Truth!!!
I wonder how many of us followed Nitrado's AI instructions on how to fix the issue and set our servers back several hours to try and fix it.
I was able to fix my private server by turning off crossplay (everyone on my server plays through steam) so it seems like it's an issue with one of the other platforms :/
Im reading that ppl just spammed join and eventually got in. Dunno if that actaully works tho.
I dont seem to have the issue on my servers atm. But I also only updated one of my maps - but players are still able to join it.
So I dunno whats happening with the game atm.
i need help me and my friend made a non dedicatred server and now idk why but it dosent let me get further then him hes the host
and when he respawns it telpeports me to him
That is tether. All non dedi has tether, no way around it.
even the respawn teleport thing?
Yes
IS it possible to make range bigger
A little
Its a setting
Not sure how well it works
whats it called
Tether
is it on ase
No idea
i put the setting on 10000 it should be infinite range now lowk
Anyone know how to fix my friend from timing out
When they fix the game so we can play 😂 a lot of us can’t play on unofficials been like this most the day
good thing i never touch nitrado
Does anyone know how to prevent hibernation and allow offline breeding on privately hosted servers like Nitrado servers?? I used to play on a cluster that had that, and I can't figure out how to set my server up to do the same.
probably was a mod, bc what I'm seing the propagator and hitching posts override the dinos in stasis part that stops the offline breeding
specifically mentioned Dino Depot + Cybers Structures as being things you can use
I personally don't d that bc I have settings to get babies quicker and a mod to help reset breeding timers
the offline breeding I mean. I self host so I don't want to overload my machine
Did you find a fix for this? I also have the INI for WorldBossKingKaijuSpawnTime=19:00:00 for Extinction and 03:00:00 for Astraeos, and neither seem to be working. Both are in GUS.INI in server settings.
Not really. We found the time when the Titan spawn irl and the we adjusted the time in the config.
Can you give me more details? I am hoping to get this going for my cluster. At first I thought I put it in local time of the server, but then was told it happens in UTC timezone, so I adjusted for that and its still not spawning as far as I can tell.
What was the irl time? I am hoping that by knowing this info I can figure it out - I know its probably been a while since you adjusted your settings, so any info will be appreciated
Can you elaborate on this? I have WorldBossKingKaijuSpawnTime=19:00:00 - What 0 disables the spawn? I am trying to get it to spawn on my cluster but I am not being successful here
Hey there! How do you have yours set in the INI for reference? I am also in EST and I swear its not spawning for us on Astraeos or Extinction with the times I have set. I have this in INI: WorldBossKingKaijuSpawnTime=19:00:00
And how did you set your servers to EST and not UTC?
Appreciate any help you can provide
I selfhost and changed the operating systems time to be est
Self hosting myself but according to the server logs, my times are still appearing in UTC:[2026.05.22-10.58.32:502][131]2026.05.22_10.58.32: Saving world...
Think I may know part of the reason why that's happening, but the server machine itself is on EST. Thanks for the info you provided
You using docker
Not at all
The machine itself is set to 7:14AM, but the server logs is showing a time of 11:14:40, which is 4 hours ahead
That's odd, normally only see that when using some form of docker as they have there own os that is normally set to utc
Hello all! Question for the group, Im playing Ark on Xbox- it looks like xbox is currently on v87.11, but my nitrado server is on v87.12. It hasn't let me play in ~24hrs and Im not seeing any Xbox updates. Is this a common occurrence or is there something I can do to play again?
Your version is correct, and as long as both are on 87.xx you shouldnt have any issue joining
Dang, I cannot figure out why it won't let any of us join then. Maybe the timeout issue someone mentioned earlier is still occurring. We keep getting a notification after trying to log in saying "Lost/timeout connection to host. Would you like to wait to automatically join this session?"
If getting timeout contact Shitrado support likely XD
For us self hosters this is usually a port issue
Lol, will do - thank you!
pls work
o.O
they said "THIS SEVER IS A COMMUINTY" bruhhhh I want my sever to work
Cant help ya 🤣
they gotta stop this ownership of the market
Run your own then XD
AKA monopoly
i did
Aint gotta pay no one
I dont care about hosting services i host my own servers 🤣
HOWWWWWW
Literally info in the pins
I aint making a new one
Then put your save on it.
Yup thats what i did 😊 thats how you move from a to b.. Just ftp the stuff over from a to b
Anyone know if there are any .ini file settings to increase Burrowbuck tunnel decay timer?
Anyone know if this issue has been resolved? Figuring out if it’ll be a Ark-less Friday evening lol
it's funny how this message went away in the dashboard but the issue is still clearly happening
with 128 gb of ram and an ultra 9 285k how many servers do you guys think i could run while playing
with 3-5 people
Should do 6 easy, 8-9 if not playing game on same box, even more if people are not on all of them at same time, server use around 10-16gb of ram idle and can use more if a lot of people on it
hey, can someone help me, me and my three friends wanna play together, we are all on pc iam on the steam version theyre on the xbox version, so i wanna host a dedicated server so we can play, can someone help me set it up? id really appreciate it
pls help
if someone wants to help please dm me! id love if someone can walk me through it on call
Anyone got an update on the nitrado server thing
Are you stuck on something specific?
yes
ive followed this youtube guide but i genuinely suck at fast paced guides
Look for a text based turorial or pause at each step
Well, you'll definately need to do a lot of reading. There's 100's of options and settings and videos are not going to walk you though all of that!
most settings you can just look up when you want to mess with them. thats how I got mine.
I would suggest watching each step multiple times and can slow the speed on youtube.
yeah iam trying but iam stuck i just wanna host server for me and my friends
i made like the text thing he asked me to do start.bat, edited it on notebook and launched it
but it did something different to his
steamCMD bat or server start bat?
server start bt
what does it do when you start it?
bat, when i click it it says updating but on the video it starts the server for him and mine just closed afterwards
u want me to post the commnds i put you mean?
i used this from this guys yt video
ok it doesnt let me send it
probably will just be the start. calling the file and then the map name
but its from Troublechutes yt video
wdym, sorry?
echo off
echo ------------------
echo Updating server
echo ------------------
start SteamCMD\steamcmd.exe +force_install_dir ..\server\ +login anonymous +app_update 2430930 validate +quit
echo ------------------
echo Starting server
echo ------------------
start server\ShooterGame\Binaries\Win64\ArkAscendedServer.exe TheIsland_WP?listen?SessionName=<SERVER_NAME>?ServerAdminPassword=<ADMIN_PASS>?Port=7777?QueryPort=27015?MaxPlayers=32 -NoBattlEye
what folder is it in?
since you don't start the file path at the drive. it has to be in the same folder as "server"
mine is C:\ArkServer\Ark\ShooterGame\Binaries\Win64\ArkAscendedServer.exe
so I can have it in any folder.
i still have no idea what to do
no idea on the video but it has to start at a path that windows can follow. either being in the same folder or start at the drive.
replace start server\ShooterGame\Binaries\Win64\ArkAscendedServer.exe with a file path that includes the drive.
so like this one ?
yeah, whatever the path is to the exe 
ok iam sorry im terrible with tech
ok i clicked on the start.bat after changing that and it updated and didnt launch it
its just not launching anything after i do it
can i dm u screenshots?
sure. I have my update and start as different bats but I don't see anything wrong with the way its formated 
okie i dmd u
you still need the start 
also you need the path to yours.
idk wht that means
go to server\ShooterGame\Binaries\Win64\ArkAscendedServer.exe that folder and get the full address.
if you click on the bar at the top it'll let you copy it.
then put start address\ArkAscendedServer.exe
yeah, click on the top bar where it says win64 as the last folder and get the full address. then when you copy it into the start.bat add \ArkAscendedServer.exe to the end so it calls the application
ok done ill see how it goes
it still just updates then closes the application
look at dms
put start before the path
I'm not sure, when I launch that (replacing the paths for mine) it runs. it doesn't run in order tho so maybe thats the issue? 
try making a new bat file that only has the end part for starting the ark server. (the last line)
idek what to do
ok ill try, should i delete my other or no?
nah, just leave it. the name doesn't matter.
it worked
well, its like booting up and bringing up the ark thing
i just used the last line
so yeah, your PC is probably getting mad at the order of them. not sure how you'd fix that 
I would just use different ones.
have 1 bat to start steamCMD to update and 1 to start the server.
oh
the bat isn't waiting for steamCMD to be done before starting the server. I imagine thats the issue
but how do i do that then
no idea. I use different bats
doesn't really matter much. can just run the update bat whenever a major update releases.
didn't the ark server run?
yeah with just the final line that means no server name or anything
well it didnt run run it was booting up
can u help me on screen share?
add the rest of the line. theisland to no battleye
what about all the other stuff
the stuff above it is just for updating the server which is causing the issue
just take whats after
soo updating the server doesnt matter ?
just open the old bat when you want to update
its not working anymore
with only start address\ArkAscendedServer.exe, the server starts booting
i added the island and blah blah and it didnt work
it didnt even do the updating
try moving serveradminpassword to the end. maybe its eating everything after
end of the group so before nobattleye
thats the only part thats different to mine anyway
you also have <> around the passwords but I doubt that'd make the server not run.
didnt workk
iam actually gunna die
can u watch my screenshare? i really dk what to do
did you remove the <> around the password and name?
noo
oh its booting now
yeah, its those. I just checked.
i think its working, thank you 😭
thats kinda weird 
now i gotta figure out the random other stuff mods and yeah'
i think it works like it says the server is ready
but the guys video it looks alot different
ok i confirmed it works not i just gotta get mods and also allow ppl to join
is it pvp type shit
no its pve
its alr ill delete discord
why
i was trying to make joke now you ruined it
i really have to delete system32 now fck it
ohhh
no my server is just for my friends not random ppl aswell
im frend😔
please say you know that meme otherwise itl be weird asf
i dont...
Anyone else still getting timed out on there servers?
Ok so my friend is bisect hosting a server and no matter what method we can't join it
It is up and running but it is just not able to be joined, whether its being timed out or the query thing, please help
We are having the same issue on my server mainly with ps5 players on val
can someone be my test subject to see if you can join my server
hey sorry to bug u, dyk the ingame settings, yk when u go to server, shootergame, saved, config and windowsserver
can you copy your document and send it to me cus i cant seem to get my settings working
i cant boost my health or anything like that or harvesting or exp
or can someone past theirs
Do you edit it in nitrado by hand or use beacon?
Ah then I dont think my file info would help lol
thank u anyway
Absolutely sorry I couldnt be of any help
can someone send me their dedicated server files on game.ini and gameuser please please please 🙏 iam struggling to get mine to work
Any help?
there is no one😭
I just wanna play ark man
i would but mine is customized to my mod load on my server (loot drops and additional creature spawns plus engrams and breeding/taming)
and the server creates the ini files on first run/install, so if you're fine with official settings, no tweaking needed
well default settings i mean
better to just change the settings as you play. thats what I did over the last 9 years 
Your file info would help, the coding is the same no matter what host you use.
My advice get beacon Omni- it helps set up massively, you can export or deploy the ini directly to your server/pc
someone said ur file would help
Please send me it
I'll dm you some default files
If anything is missing in them you can just add it in
thank you
can someone help me with my dedicated server
i read the wiki, pasted the configs i wanted and they just dont work on my server
nor do my mods, ive literally been trying for like 5-7 hours
i cant join my friends unofficial server but i can join any other unofficial server, it just gives me connection timed out
can someone help me we are on the same version and there are no mods or both of us
hey ya'll. Something is immediately booting clients off my server upon login. It just randomly started happening overnight so there wasn't a change. Anyone have any ideas on what I can look at?
The client boot is immediate, before even entering the server.
Question: our cluster has been plagued with an odd bug. We will periodically have all inventory’s go completely empty. Vaults , generators ect. We have a full cluster and it was isolated to just our rag map but now has struck our astreos map. Each time we need to do a roll back. Anyone else experience this?
can someone help me i have a dedicated server and all the dinos are really low level
post a few of the settings 
the settings work now its just two things mods and low level dinos
like iam finding level 2 and level 10 dinos and stuff, i have DifficultyOffset=1.0
OverrideOfficialDifficulty=5.0
you have to wipe dinos after changing the difficulty.
admincheat destroywilddinos as a command or put -ForceRespawnDinos in the bat file when launching it
my admin cheat isnt working
yeah iam loading up rn to retest it
yep
doesnt work, i enabled admin logging in gameuser, and added a password
what are you doing to test if it allows commands?
destroywilddinos
do admincheat destroywilddinos
doesnt work
you are typing it in the console not the chat right 
maybe the password is wrong?
nope
iam 10000 percent sure
idk what to do
wait what the hell
it just worked ??
the dinos are still like level 10
should i increase my override to 10
do you only see dinos that are multiples of 5?
then it should be working. I would suggest using custom dino levels or vanilla with sprinkles to fix the distribution.
they are mods 
but how do i fix my mods tho my mods arent working
i have this under server settings in gameuser- ActiveMods=949521,937184,946694,953154,928793
doesnt work though
they go in the bat file
but when i put them in the bat file, and try to join the server, it says ‘invalid server password’
wait check dms
its supposed to be like this -mods=942024,929420,935408,1188679,1181172
at the end of the bat file.
yes 
tyyy
settings with - are all seperated at the end.
the server wont start now
i added the mods at the end of the thing
okok i removdd two mods not the server is up
OK the mods work
which one is better
custom dino levels just does that. vanilla with spinkles has more features.
okay and like how does vanilla with sprinkles work?
like how is it gunna change the dino lvls
they change the distribution. so more dinos at the higher levels. depending on the settings you use
oh okay
btw when iam in my world and after i leave it goes back in time😭
do i have to stay a certain time to save or
also i destroyed wild dinos now none are spawning
do deinons get extra levels like drakes do?
my current max level is 300 and a drakes is 380 due to the extra points drakes get, would a deinons be 300 or 380? i cant remember
Max would be 300 wild for deins at those settings. Picking up eggs doesnt give “taming” points.
ahh alright
also if i update a mod in my “installed mods” section, does it automatically update it in the mod list section for ark creation? or do i need to go through and manually press “update” again
Are you using a hosting service? Not sure what interface this is.
im just using singleplayer ark ascended
when you press create theres an option that says “mod settings” and under it is “active mods” and “available mods”
in the mod store theres a section for “installed mods”
i updated my mods in the “installed mods” area, do i need to press in the active mods section too?
Tbh Ive never touched this. Mods update when you log in.
there are level 300’s in my thing😭😭😭
how do i change that
can someone help?
if you set the difficulty to 10 then 300 will be the max.
shouldn't.
servers do a check, singleplayer does not 
yeah i accidentally put it to 10 LMAO
How do I sneak past these laser shooters that killed ke
Shows how much I know about sp.
Also, this being in the server setup channel lol.
its also for singleplayer
it says it in the topic 
Whelp. Im officially useless here.
Now I gotta go read what the bobs channel is for
any kind of help including settings while this is just for server/SP settings/setup 
Yeah
Does anyone check that one? I dont use it but I notice ppl tend to just ask elsewhere. Makes me think, other than mods, no one answers questions there?
people do use it. questions can be asked anywhere as long as its ontopic for the channel
here and bobs are just only for help
Ok
Ill just prefix answers with “sp or server” and disappear for sp questions. Cuz I literally never use it anymore lol.
most settings related questions are gonna be the same. unless they are on console where they can only do the ingame menu 
anyone pleaseeeee???
Can you join the same map on single player with the same mods enabled?
im having issues with my dino levels in singleplayer, can anyone assist me?
im using custom dino levels and want to play on difficulty 10 but my levels are almost in the thousands and i removed the difficulty override ini, changed the regular difficulty ini to 0.5, and have the max dino level set to 300 like i want it to be for the custom dino levels ini setting and im still getting level 900 dinos
Can anyone help, I can get the tribe tame limit to go up on my Nitrado server
i have a question does xp multiplier and harvest amount go in game user or game ini, also how do i make my character need to eat less
gameusersettings.
lower PlayerCharacterFoodDrainMultiplier=1 (also gameusersetting)
yes
we dont have any mods\
it just says connection lost/timeout whgenever i try to join his server
i really need help
Someone else can jump in if this does not work, but its helping others per reports from other discords.
Try this:
Get on the same map on single player, walk around for 15 for full minutes and play, punch trees etc (time it if you have to, 5 mins wont do)
EXIT TO MAIN MENU
Then try your server.
boost
I’m trying to simply play in an unofficial server. On on Xbox and I’m until to download the last mods needed to get into this server. I’ve tried joining a different server, downloading the mods individually, clearing cache, reinstalling the game, hard resetting, and switching from wired connection to wifi. No progress. Help would be appreciated. Thanks!
I'll try
it's just that I'm able to join other servers just not his
is there anythijg he can do?
Anyone know the setting to increase tribe tame limit on a Nitrado server?
MaxPersonalTamedDinos
I can't find that setting
add to the ini files
Anyone with bigger brains than mine know the engram path for the burrowbuck saddle so I can put the override in my ini and change the level requirement? I have tried many variations today including jackalope but the struggle is real. I
Uhh . I couldn't get it to work
Since the lost colony update "changing the caves", my server and I have been having insane memory leak issues. At first it was the server, but now its everyone's issue. Client-side memory leaks. Anyone else have this and or a solution to it?
maybe EngramEntry_Saddle_Jackalope_C
Thank you, why they all can't have the same format I do not know but this was the correct order
it wouildnt be WC if they used a naming convention 🤣
Anyone know how to edit the supply crate loot. I wanted to edit them to drop with modded stuff instead of just same usless loot
I need players with some experience who want to test out my new Crystal Isles server PVE and give me tips on what to improve.
and yes posted on recruiting but no luck yet lol its xbox/windows unoffical btw
i use Beacon. the free version will let you do loot crates
you do need to add the mods to beacon's database but it's easy to do
Ok thanks
hey i was looking for a bit of help with my issue going on i currently have a cluster server and i added the center to it but for some reason every time i go to it from a different map i cant download my character and it doesnt appear but when i go back to the other cluster maps it loads fine
if anyone could help that would be so wonderful
if you are private hardware you need to add a cluster folder
both/ all maps need to share the same cluster path and folder and have transfers enabled on the servers in the settings of the manager
Anyone found a fix for the blackscreen when joining server?
Hey guys has anyone found a way (server-rule or .ini entry) to adjust the max. number of same structure type in area? Incubators are capped at 10 and Spotlights are capped to 3. I would like to know I way (if there's and it's not hardcoded) to increse that. Thanks!
im not 100% sure but i think this is an client issue ...
tell the player he should join in singleplayer and spawn there (wait some mins.) and than join the map
(this is the workaround for one of my players)
- it was the map astraeos
-
- this player is useing an HDD btw.
I tryed it and it happened after first restart after the new Major patch the server is running but as soon you connect you disconnect with blackscreen even a roll back didnt work - reinstall mods - so atm im moving a old backup to a test server to launch it there 😅
i had the same issue with one of my players ^^
and i can tell you i did nothing on administrative side 😄
maybe clean your donwload cache ?
I found I blackscreen if I try to load into my big base. works fine if I log in on a smaller outpost
It would also be interesting to know whether the player is currently located on the map, or if they are in the process of joining from another map.
if I transfer maps, if I try to load into a large base, it has issues, but a smaller base, not really. like I can transfer to SE and into my base there but it's small. Meanwhile if I come back and pick a bed in my big base, I'm going to have a blackscreen
best I can see is that it saturates the client trying to render all that really quick even on low graphics settings
it was horrid when I had 16GB of RAM, and it's better with 32GB
and my server keeps trucking along, all nice and stable (I self host so I just have to turn my head to look at the console log/CPU/RAM readout)
I completely agree.
and it didn't matter my internet, as I was using my 16GB RAM laptop at my current place with 1gig fiber
and the gaming desktop is the 32GB one
same internet setup
i have an issue where i want to play with my bestie but he plays on ps5 and i on pc when he creates or i create the undedicated server we cant join each other what could an issue?
if u mean a non dedicated session, those don't have crossplatform
if u on pc and have the ram u can host a dedicated server for u guys
oki
ark crashing on startup over and over with no consistent error msg, tried all the google responses of deleting mods / install drivers, verify game integrity /etc but still crashing as soon as the game boots up - anyone have any ideas?
I tried setting up a server with ASAM [Ark server ascended manager] but then I tried playing it with my friends, and it works fine with me, but for my friend he can't join and it displays for him "connection timed out" but when he joins other servers it works fine, can someone please help me fix this?
please help him
we really really need help 💔
Recently, quite frankly out of the blue, my server would start autobooting players immediately upon joining. Anyone willing to toss around some ideas and try to help?
[2026.05.25-00.45.16:208][107]2026.05.25_00.45.16: Rokitur [UniqueNetId:0002ba41dc504af6a7139a6e50cf5c89 Platform:None] left this ARK!
[2026.05.25-00.45.15:812][106]2026.05.25_00.45.15: Rokitur [UniqueNetId:0002ba41dc504af6a7139a6e50cf5c89 Platform:None] joined this ARK!
may your pillow be cold on both sides tonight and for all eternity
You need to open your server ports on your router aka port forwarding
is there a way to get 510 level in a dino after taming it? i keep messing with the setting and cant seem to get over 305
This channel is for discussion about unofficial (or single player) server setup including mods and other relevant topics. Please make sure you're following all the discord #rules. Off topic discussions/posts may be removed.
Please use the appropriate server ad channel to advertise your servers/clusters:
(#role-assignment required)
🔹 Steam/Epic/Stadia: #800537627752398899 or #800537518843756544
🔹 Xbox/Win10: #800538816691699722 or #800538767252389888
🔹 Playstation: #800538567122092053 or #800537680784916501
Please use the appropriate recruitment channel to find people to play with:
(#role-assignment required)
🔹 Steam/Epic/Stadia: #735196255483068497
🔹 Xbox/Win10: #735196267373920286
🔹 Playstation: #735196277221883964
👀 can't wait to see how people use this channel! ARK has such an amazing unofficials community.

O.o
new channel pog


Scandalous
anyone got a good link to the changes made in nitrado expert mode? like i cant even find the admin password option 😄
I am here to discuss unofficial servers and unofficial server accessories
👋
What's the main difference of official and unoffical
Unofficial is managed by players like you, official is managed by Wildcard. Unofficial will vary a lot on how it's managed, settings or if there are mods in use
This channel will become the new bob and perry dms
can I be included?
No
sadge

Lmao
Hi cedric
Here's the settings I use, idk if anyone wants this but I just wanna throw it out there
GENERAL
Difficulty level: 1.0
Taming speed: 3.0
Togles
Enable crosshair.
Show map player location.
Maximum difficulty.
Use singleplayer settings.
ADVANCED
Allow flyer carry.
Non permanent diseases.
Mating interval 0.01
Egg hatch speed: 6.00
Baby mature speed: 6.00
Baby food consumption speed: 0.01
Crop growth speed: 5.7
Not even gonna try posting mine because like if I posted my unofficial server stuff the egg hatch speed and baby mature speed is set to 200
What exactly does single player settings affect?
I do believe stuff like tame speed and xp and maybe some other things
Okay. I figured it tweaked an array of settings, but I wasn’t sure if there was anything that gave a literal breakdown of the changes it does
I rented a nitrado server yesterday so I can play with a few other people I know, and it’s been kind of a scavenger hunt to find a way to balance the settings accordingly.
ooh new channel
makes tamed dinos stronger, changes breeding rates, xp, not much else
@primal mango thanks!
this is new
I think I Missed a few settings
fuck wrong wiki link
it changes taming rates, breeding rates, makes dinos stronger, and changes levels so it's easier to level up in later levels
because it changes dino stats, most people advice against having them turned on
Yeah I can see it has some drastic changes to Dino stats
yeah most think that it's not a very balanced change
Also engram points
It definitely isn’t lol
30k health boosted to 50k
health is untouched
the increase per level is what's boosted
Ye, I’m meaning lvld
So KenKai, For Single player, Lan, or co-opt, or a Unofficial Dedicated. The Two different Ini. GameUserSettings.ini and Game.ini. These will set all the parameters of your game play.
Here is the Ark Wikipedia page for the descriptions of each line of the two INI. https://ark.fandom.com/wiki/Server_configuration?so=search
One tip the lines that have a - in front like (-UseVivox) or a ? are command line arguments and go into the Command Line.bat
Hey guys, currently setting up a server but ive got a problem. everytime my guy hits a tree or picks berrys it only gives me 1 type of resource respectively, so i can sit in a bush and harvest but ill only get fiber, or narco or tinto berrys with one sweep, how do i get balanced amounts of everything?
already upped gathering to x2, put
HarvestHealthMultiplier and
HarvestingDamageMultiplier to 0,25 but it still wont work
Turn off optimized harvesting, that may or may not be whats causing it
This seems nice
Ok guys does anybody know how to enable flyers in the aberration cave on valguero?
thank you very much ill give it a try
you sir, are a gentleman i thank you very much, ive been pulling out my air all night about this
It worked?
Needs to be in your gameusersettings.ini (check to make sure it not already there)
ForceAllowCaveFlyers=true
It will mean though flyers can go into any cave but this the only way to my knowledge so they can enter the Val Aberration zone
I already did that, I not only have that on but I also have the checkbox in the settings turned on too
odd that settings fixes it for me, might be something else we are missing
Gotta check
perry the big brain
⏫🧠
You need to actually go into your launch options if you are on singleplayer and add -ForceAllowCaveFlyers
Already did
Oh that changes a lot for me
When will v340.8 with survive the ark mission fix be pushed to unoffical servers ?
https://ark.gamepedia.com/275.0
?CrossARKAllowForeignDinoDownloads=true -- this allows you to download Non-Aberration Dinos on Aberration.
needs to be in your startup command line i believe
I meant to activate flyers on the aberration cave on valguero, thx for the help anyways
then the allow cave flyers option should work for that
The point is, how do I add in on SP? .ini settings right?
should be a allow cave flyers setting in the server setup.
Already did, both in .ini and in advanced settings
then... throw ur pc/ps/xbox out the window, rage a bit on reddit, and start knitting instead....
some1 knows of a pve unnoficial to chill a bit?
Ew reddit
I mean, tbf, flyer or no flyer doesn't make that big of a difference to me rn
someone tagged me?
theres probably a channel in here PvE servers (your preferred game machine)
Is this a new chat?
Yip
Can someone help me with backup non dedicated server? When i am loading in to the game it crashes. Can i copy the files of my non dedicated world and back it up?
Using Steam on Windows, your data is stored in C:\Program Files (x86)\Steam\steamapps\common\ARK\ShooterGame\Saved\SavedArksLocal (by default); so if a specific map crashes I would rename, say TheIsland.ark to like TheIslandBackup.ark and then try to rename one of the TheIsland_AntiCorruptionBackup.bak or TheIsland_NewLaunchBackup.bak back to TheIsland.ark.
Failing all that I guess you can just delete/rename the map and the game should create you a new empty one.
This one is for the unofficials until we get the patch distribution for gen2 to fix the sta mission.
For those still having issues with the turkey trial event and server crashing due to players running the STA mission. Use these in your game.ini and it will make it impossible for wave 10
DinoClassResistanceMultipliers=(ClassName="Compy_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="CrystalWyvern_Character_BP_Blood_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="CrystalWyvern_Character_BP_Ember_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="CrystalWyvern_Character_BP_WS_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Dilo_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Dodo_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Hesperornis_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Ichthyornis_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Lystro_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Oviraptor_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Para_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Pegomastax_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Pela_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Phiomia_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Ptero_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Raptor_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Raptor_Character_BP_TameSTA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Rex_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Trike_Character_BP_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Trike_Character_BP_STA_Corrupted_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Trike_Character_BP_TameSTA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Trilobite_Character_STA_C",Multiplier=10000.000000)
DinoClassResistanceMultipliers=(ClassName="Turtle_Character_BP_STA_C",Multiplier=10000.000000)
@empty comet i will try this, currently what i did is copying RagnarokSavedArksLocal and put it in desktop for backup. I tried single player ragnarok after that it worked, non dedicated after that it worked. so i deleted all the saved files for the map ragnarok and put my backup in it. it still crashes, a new non dedicated works but mine doesnt. Currently i am unninstalling ragnarok and reinstalling ragnarok.
For sure if a fresh map still crashes there's an issue with the game, not the saves...
Fresh map works, new singleplayer and non dedicated @empty comet, there is something wrong with mine backup one i think.
kk well, doubt restoring anything from ragna specifically will work, I'd try the other .bak files...
Otherwise IMHO you're stuck with trying stuff like ark-tools and the like to extract what's left of the save file (if it works at all) and hope to be able to restore a valid new savefile. Frankly that's a TON of work and might still have a lot of issues.
You know when the map is loading you see at the bottom left what is loading?, it gets crashed on Ragnarok_Proxy. I deleted it from ragnarok files and verified my game after that. It says failed to verify that 2 files from Ragnarok_Proxy, i think reinstalling ragnarok gets the job done.
I wanna show you what i backed up, maybe i did it wrong? dm
Did you change any launch options?
No @floral warren, it started happening after i shutdown my pc wrong i guess, on the power button of my case.
⛵
For anyone who wants to make giant boats, there's 2 settings you need to modify. One is "PerPlatformMaxStructuresMultiplier=X", which is also available in the Advanced Setting Menu. Multiply whatever is there by 2-3 times.
But the other setting is not in that menu.
You'll need to modify it in the GameUserSettings.ini file, under the [Server Settings] section.
Look for: "PlatformSaddleBuildAreaBoundsMultiplier=2.000000" and set that to around "5.00000".
You can go higher than 5, but the games stability kinda starts breaks down above 4. Players standing on the outer structures might experience some choppy structure position updates when the boat is moving or turning.
So if you're playing online with others, try to keep it as small as you can.
Have fun!
Then try one of the automatic backups as was suggested yeah
Ark-Tools?
which automatic backups are you talking about?
Sure
Anyone know how to solve this problem or and the ark. There is a base on my server that when almost a player, when it comes close to crash, it serves it, I don't know how to solve it. I even gave more crash the server.
@neat girder I would say either wipe the map with a command or roll the server back before the crashes occurred or if there's a way to get to their base without crashes and wipe their base
Rollback is the best option, DestroyTribeStructures might be too if a rollback isn't feasbile
do they have a lot of tames out and sitting around? if they can get on and cryo some of them up, it would probably help.
or admin-wipe them somehow.
or DestroyTribeStructuresLessThan and increase the amount gradually. might be able to stop the crash without having to wipe the whole base
I used destroytribestructures command, but server crashes too. The 6 hour rollback solution.
It might be too much load for all the structures. try the LessThan?
I haven't tested this other one.
Does anyonehave a server
I only use plugins
Could try removing all the plugins (on a copy save) and see if that stops the crashing too
If it does, halve the plugin list repeatedly until you find the one that cuases the crash
so this has been happening frequently, already and 4x in 4 months of Server. from what i understand of this bug is when a player travels from one map to another sometimes when he is born in bed he falls infinity down and dying in the game mesh, this generates an error and every player which brings the crash server closer to the base.
I've also done it on a test server, I think it's the ark's own bug
I'll catch the error
Dope
Anyone know a good serever wiping soon
@pure forge you can look in #800537680784916501 or #800538567122092053
bro
how do i search in nitrado
for mods
because i can only use the mod ids
and some mod ids dont work
The steam page has the mod ids. Depending on the mods, some may be discontinued or interfere with another mod.
okay i figured it out now thanks for the help
If you don't know who's tribe the structure belongs to you can use the ARK map save viewer to identify the offending tribe based on approx location.
And if I remember from your posts on Kal's discord you have ASM so easy to issue the destroy tribe structures command over the rcon console or rcon commander if using Kal's crosschat plugin.
I'll take a look around.
I've already used the destroy command by rcon and base not destroy.
The server crashes.
I'm not able to download this program, if it has a direct download link.
At the bottom of the first post is the viewer application.
hello guys, in my non dedicated server with my friends, with some dinos they fly in water
what is the fix for this
Mod Dinos?
Otherwise I'd check your launcher args and see if -ForceAllowCaveFlyers is in there.
Might cause that
No no mods used
Alrighty, then certainly check to see if cave flying is enabled.
@mention me if you are trying to run a cluster for xbox/w10 and need a hand setting up server settings and configuring .ini files. I would appreciate the opportunity to assist and be apart of a team for a startup community. I don't do well in the spotlight but enjoy the technical side of things. If you need a resume you can checkout my test server i stood up.
Search: [US][10X] DINOCO 4 MAN PVP [ISL]
Not going to TLDR all the server settings as i've not had the best of luck with that here lately and have been burnt too many times. Just @mention me or shoot me a DM (Warmup#5291) and we can discuss. I've always wanted to make a cluster but it's too $$ for me to standup a full map cluster and I don't like the idea of accepting donations. I feel I would be a better fit as an engineer/technician for a team that has a dream and would be willing to help them pull something together. Looking forward to hopefully getting some hits on this post.
what map
im on valg but im trying to switch to talamh
i got the mod id
but i dont know how to change it
DM you the link since I can't post links here 😉 hope you get it resolved.
If anyone is trying to startup a Steam cluster one of the best bang for your $ that i've found is hosthavoc... 50 slots = $20/map and 70 slots = $24/map
They have a lot of nice tools (including FTP) and you can setup automated tasks with server restarts and broadcasts
My brother used host havoc for a while, he was happy with it
how did i miss an entirely new channel lmao
There is an answer to that
@humble thicket probably knows it

FM has a weird way of saying I tagged incorrectly on purpose so it didnt ping 140k people
What you want on there
I'll do it on your behalf
Also sorry, I know this isn't strictly on topic, but supporting hype seems at least semi-relevant
uhhh idk now that i think about it, if you have zettapanic then there's never any harm in a good ol' zettapanic
thx lol
Is there a way to get rid of the tether on non dedicated worlds.
ok
No, but if you're on pc you can set it to 99-100 to go across the maps, just not in caves
Ok, thanks.
anyone else still having a problem with crashing out of the survive the ark mission on Gen2? We have verified files, checked mods, all the normal things nothing seems to help. I am running a nondedicated server on a computer that is more than capable of handling the load.
wasnt it about dodorex causing crash, it used the same entity that fear evolved used in that mission
Hello, has been searching for quite long on how to let cross-platform activated (steam & epic here) ty
having no mods should be enough for a server
For non deidcated, it's not possible
does it allow plugins?
@wraith hollow use #735196255483068497 for lfg.
Thanks
Should… mods 100%
Plugins aren't always supported by server hosts due to how their installed. Also depends if they're a Linux or windows host
For dedicated, you might need -crossplay option (see wiki https://ark.fandom.com/wiki/Server_configuration) I don't have any Epic users...

