#building-and-recc-chat
1 messages · Page 1294 of 1
?
you do realize b460 doesn't support ram frequencies above chip rated right?
you can buy 3600mhz ram but it's going to run at 2666 lol
I didnt no
do some more research before you start flipping
How good are those parts combined? / Is it overall a good build?
System Builder - AMD Ryzen 7 5800X, GeForce RTX 3070 Ti, Corsair 4000D Airflow ATX Mid Tower
@earnest olive https://pcpartpicker.com/list/zp2Dcb
System Builder - AMD Ryzen 5 5600, GeForce GTX 1060 3GB, Apevia Prodigy MicroATX Mini Tower
the case and gpu I own already. everything else is optional. Just wanted to build something to sell and use these parts honestly
I am in no way a pc flipper. Just looking to build with the parts I have and possibly make a little money
I might stream and I mainly need the pc for work (gaming ofcourse too)
I was just trying to come with options instead of coming in and saying hey build me something. You know.
so is it a good build?
what kind of work do you do
Hi, so I am looking to replace my old nighthawk wireless adapter that got damaged due to a power surge, it's starting to drop connection, and I was looking to just get a new one. Issue is my new gaming pc doesn't have a disk port, would the new wireless adapter work with my current software for my internet connection?
ok, so my new gaming pc i got last year, the company that built it, built it with no place to put pc discs into.
disks?
sorry typos.
It's fine, pretty much, I have the software installed into my pc for my internet connection, all I need to do is buy another nighthawk.
Oh, for drivers?
you can probably download those online
in most cases windows will auto install them
Ok ty, the one I currently had got screwed over when my old gaming pc got fried due to a bad power surge.
dang one time my xbox got fried and i couldnt play video games for like 4 months
It wasn't fun.
I bought one of those power bricks that is meant to save your electronics is something happens..
yeah it destroyed that and went right into the pc
I need help
What brand was it? Most of them warranty connected electronics in case of a damaging surge up to a certain value
You could probably get APC or Amazon Basics to refund your cost of new parts, other brands might make you jump more hoops
Yo wassup what you need help with
It's been a bit at this point, but yeah it was a apc.
It was a year ago, and i went through enough crap with it
it was a headache and a half
Are third party sellers on Newegg reliable if I want to buy something for my build?
I want to buy a video card
Which isn’t that technically considered a graphics card in #graphics-cards
Typically no
I'd check their seller profile first
If it's an official seller from the brand of the product
It's usually reliable enough
Yea like buying Arctic fans on amazon and the seller is literally Arctic, 
Thanks
all cpu’s come w a stock cooler, no?
Nope
Not all
Intel for example, doesn't include a cooler with their K SKUs
So does AMD for X that are above 5600X
5800X and above lacks a cooler in box
And most of the times, the stock coolers are not good
Not that you would want to use a stock cooler with that anyways
it’s just not viable for those high power cpus to have stock coolers
The stock cooler can’t do its job well enough and companies aren’t willing to give you beefy coolers
^ They'd have to raise the price of the CPUs to include better coolers, which would likely be tossed aside anyway. It's cheaper for the manufacturer and the consumer this way.
Ya
Like apple
Reduce price of the product by not putting excess crap in the box
“crap” being charging bricks and earbuds…
Right. Modern flagship phones usually don't include the chargers or even cables sometimes.
It only makes sense for everyone. Less cost, and less ewaste
Is this everything I need to build a pc?
I am also getting these
- Lian Li UNI Fan SL120 3 Pack White - with Controller (ARGB 120mm LED PWM Daisy-Chain)
and - Lian Li UNI Fan SL140 RGB x1 140mm Revolutionized Daisy-Chain ARGB Fan - Black
Will it all fit?
itll all fit but its not the best value at all
That cooler 
the one ppl top mount and have it die lol
cause msi has to be different ofc
Wym
3080 is insanely overpriced, not much to gain from a 12700k over 12700f, etc
There's way better parts for way less money
$160 for a 1tb drive is roughhhh
What 3070 is good?
i thought you had a 3080 on your list?
What’s the normal prices?
its a samsung drive so thats probably normal price
Yeah but if it’s really over priced I would go to 3070
3080 12gb in general is overpriced
If you can wait a day or two for EVGA to restock you can get a better priced 3080
3080 10gb can be alright, and 3070ti has been well priced recently
also id reccomend using pcpartpicker
sometimes other retailers have cheaper prices than newegg
It's the 980 Pro, 4.0 tax
.
unfortunately
corsair ram is rough too
So any 3070ti would fit the pc?
Ok I’ll look for it
other places dont have good prices usually
Is it on newegg?
They've been consistently restocking on Tuesday, Thursday, and some Fridays
Thanks
Oh yes! I found this https://www.evga.com/products/product.aspx?pn=08G-P5-3785-KL
System Builder - Intel Core i7-12700K, GeForce RTX 3070 Ti, Lian Li O11 Dynamic EVO ATX Mid Tower
Yep that or the FTW3 model should come in stock in the next couple days. Check in the morning. They should be under $800.
Is this better then mine?
When it’s not in stock does it not show up to pay for it?
Cheaper by far and just as good
Yeah when it's out of stock it won't have the add to cart button
Well I might just buy what you just put
This looks pretty similar
Most of it is changed
The core specs are very similar yes, but models and brands are different.
Yea
How do i select motherboard
Ik i have to select the same socket as the processor but
What motherboard would perform good. How do I know that
In pcpartpicker?
Which ones are good is something you usually just have to know from reviews and experience
@desert sigil Once you level up and your name turns green you'll be able to post pics. Any text is auto deleted in #build-pics unless it's posted with a pic.
is it possible to build a pc with a 30s series card without the cpu bottlenecking it within the price range of like 1020 usd
If you get a 3050 sure
1 you don't need to worry about "bottlenecking" you can't have a bottleneck free system no matter the budget 2 you can get a good pc for 1k USD although the 1020 makes me think you're converting currency, what country are you in?
hong kong im trying to find a suitable build for my uk friend
his budget is 8k hkd
Your friend is in the UK?
Or in Hong Kong?
ye hes from uk
Prices are far better in the UK. Are you building it and then shipping it to them? Or are they building it?
they prob gonna be building it
1k pounds?
Why is the number so exact are they not in the UK?
So 800£
I would see if they can do 820 and do this
https://uk.pcpartpicker.com/list/VkjVcb
If not for 800 you could do this
https://uk.pcpartpicker.com/list/Dbw2Vw
Imo it's worth the extra 20 for the better case though
System Builder - Intel Core i5-10400F, Radeon RX 6600 XT, Lian Li LANCOOL 205 Mesh ATX Mid Tower
System Builder - Intel Core i5-10400F, Radeon RX 6600 XT, Cougar MX331 MESH-G ATX Mid Tower
damn bro thanks for the help rlly appreciate it
No problem
Ay yo I'm thinking of upgrading my CPU, and with it my cooling solution. I've got a 3600 Ryzen, and I'm thinking about going to 5700 maybe a 5800x. With that I want to upgrade my cooler which is a CM Hyper 212. I expect loads, and so I don't wanna grill on my CPU. I've thought about an AIO, to free my DIMMs and maybe lower noise and temps.
I've got an eye on the Arctic Liquid Freezer II, Both for the RGB and about how I heard it's good.
Questions though.
- I could top mount a 360 frontwards. My case is set up for overpressure, and it's the Meshify C. Or I could mount it topwards, but only a 240.
- If not an AIO which cooler would work on my B450 E and not block a DIMM?
- If not the aio I mentioned, then which one?
The Arctic Freezer II 360 is an amazing cooler. I have mine mounted front of my case. Can't even hear the thing.
Yeha but I've got a 3060TI
And an overpressure case
As in more pressure inside than outside
So it'd be hot air in
And I have a 3060ti which now sits around 65 on load
I've never heard of overpressure.. do you mean negative pressure or positive pressure?
what case
doesnt really matter
oh meshify c
how are fans arranged
and rear exaust?
Little stuffed but not too bad
Do you only want 1 exhaust? I'm a little confused.
3600
I said it in my question
It's still a 120 exhaust fan
He wants to upgrade to 5700/5800
front mount
I'm not sure if you realize how BIG is the Meshify C
The 240mm freezer can handle a 5700X
I was gonna say if you front mount the 360, you could use the front fans you have for the top as exhaust as well..
It's not really that big, kinda average maybe a little below
I've also got my vr setup placed on top of my case so I don't want to use my top for exhaust
Since me room is packed
yeh but id still do for 280mm or 360 and carry it over
Then do the 280mm on front
I can mount a 360
that doesnt mean you have to
Or a 240 or 120
😂
Frontwards
I did because I could lol
I want a 360 since bigger would mean more overhead and, logically, a more silent experience
280 will do u just fine
140mm fans are quieter than 120mm anyway
You mount the fans to the aio tho
if u can, then u can mount a 280mm aio
You can
That's what I thought too
You can mount the fans to the case as well as the aio
Ah
Ah
Like my fans are pointing out the case, you just use the longer bolts to go through the case, through the fans into the rad
just get a 280mm arctic freezer if u plan on staying on the 5800x/5700 for a while
I must be blind
otherwise get 360mm one
Don't think 360 fits
Weird. The website shows a 360 fits.
Not according to the specs on wegg at least
iirc it's a VERY tight fit
gotta remove psu shroud and hdd cage
then it fits
Yeah so can't have 3.5" drives and you have the ugly hole
Lol
The shroud is meant to slide over but then it's blowing into the basement
Maybe some paper mache?
i cant exactly wipe it
That looks ugly compared to the rest of it.
because poster paint
I meant like the corners
Wait, but it should fit without any modifications
Meshify says on their page it should fit a 360
Unless you count removing the hard drive tray a modification
Get some popsicle stick to help it hold a good form
it does after removing a few screws
Well, I do
they be removable for a reason
Heck

not a bad idea
one day

but yeah my pc needs a cleaning
maybe this weekend
oh btw @fossil cedar i managed to get my temps lower
I need to get fractal to send me a new fan. One of the chonky 180s is rattling LOUD.

How so?
I have a small desert cooler pointed in there with side panel off
Get popsicle sticks today. Clean your pc today.
dropped temps by over 10C
Lolllllll
Compressed air is a godsend
I mean if it works it works right
Electric bill go brrrr
it cools me too and consumes as much as a fan
so im chilling
Nw, cover it with isopropyl
Wtf is on your cpu?
Mineral oil bath
no cap
Yeah
its a smaller hyper 212
I'd think about mineral oil if it wasn't so spooky
because better cooler within budget no fit in this case
It feels really weird dunking a running PC into a liquid but it doesn't conduct electricity
Get bigger case :D
called 410r i think
3060ti first
Why a 3060ti not a 3080ti?
because im a broke college student
Desert cooler on
yeah
I know about a local server stack that zas their servers in mineral oil
Wow
Idle cooler off
But my idles are 22c and my load is about 55c
But I do have a 360 on the 12600k
So, that's probably why
Fair nough
My brother in Christ, get your cooling solution in check
Nah it's his ambient air that's the problem
💀
Death
And that's a cold day today right

thankfully im out of town from wednesday to friday i think

trade with meeeeeee

So cold
It is middle of April, and it's been snowing yesterday
At least that's a dry heat, it NEVER gets below 30% humidity here and it's usually closer to 40%. And we hit 45C every year in Summer.
today do be drier than normal
but yeah itll hit 45 or so in peak summer here too
this rn do be the start
I HATE
THE HEAT
AND THE SUN
SO MUCH
I need to move to Canada, I'm the same way. Get me out of the heat. Let it rain/snow 8 months out of the year.
45C at 40% humidity is torture
INDEED
At least it's not Texas hot here
im the sort of person who doesnt need the sun much at all. my visit to london for a few weeks was bliss
When I was in Basic Training it hit 51C at 95% humidity
How are you still alive
"Black Flag" days, meaning "don't go outside unless you absolutely have to"
There was a lot less marching lol
more like dont go outside if u like keeping ur skin
Ohhhhhhh no
Dont tell me many people in same room as well
52
HOW ARE YOU ALIVE
By drinking 1.5 gallons of water a day
Ahhh
Don't forget that military uniforms are long sleeved as well
i usually have around 6l and apparantly there is such a thing as too much water
bruhhhhhhhhhhhh'
But at least we have short sleeves under the jacket
that sounds like torture
idk how people manage to live in army conditions. massive respect to all the soldiers
We did our mock deployment (beast week) in the middle of that summer though
We had to do CBRNE drills in full gas masks and everything in the summer sun
i dont like how its called beast week
damn
that no good
No kidding
We actually had 2 people get heat exhaustion
Ironically one was an MTI
Im surprised it was just the 2
HYDRATE
Every 5 minutes
No joke
The gas masks even have tubes to connect to your canteen
Oh damn thats kinda cool
it would be much worse to remove the gas mask to sip water every time
Especially considering we were doing chemical warfare drills
You take that mask off you're dead
TRUE
I don't care what everyone else says I liked the gas chamber
They have you go in with your mask on so you can learn to trust it
Then you take it off and do jumping jacks lmao
I'll take that out of context
thats... incredibly random
Increases your respiration rate so you breathe more of the gas and breathe deeper
Most of us were retching by the end
Luckily it was before lunch
AHHH its like a gas with mask on vs with mask off
makes sense
i thought mask on in the gas and then jumping jacks in another area
BTW it's not tear gas they use
It's far worse
das no good
It's CS gas
isnt cs gas a big part of tear gas?
It's like concentrated tear gas
We all had this look lol
dats no good
Take solace in the fact you had proper masks and not the Soviet elephants.
System Builder - AMD Ryzen 7 5800X, GeForce RTX 3080 10GB, Corsair 4000D Airflow ATX Mid Tower
How much of this have you already bought
Do I upgrade from my R5 3600 to a R5 5600x with my 2070
Depends what you play what res etc
I'm at 1080p. I play a lot of iRacing, Assetto Corsa, Assetto Corsa Competizione, Hell Let Loose
Hell Let Loose is terribly optimized
Very CPU heavy
I've never heard of most of those so not really sure if they are cpu or GPU bound in games
Ahh
Emmm personally I'd go 5700x
Pato how's this https://uk.pcpartpicker.com/list/GLWqpH
I'm unfamiliar with Uk pricing
System Builder - Intel Core i5-12600K, GeForce RTX 3080 10GB, Corsair 4000D Airflow ATX Mid Tower
5700x is a newly released cpu
It has 5800x tier perf with a slightly reduced clock I believe
Nope
Also power usage iirc
System Builder - Intel Core i5-12600K, GeForce RTX 3080 10GB LHR, Corsair 4000D Airflow ATX Mid Tower
@mossy venture ^
Just sort low to high with 1tb and nvme filter 😛
stock cooler on a 12700f enough for a week or so? aio doesn’t get in for abt another week and a half
depends on your definition of enough
it'll stop the CPU from melting
you probably won't hit thermal shutdown
don't expect maximum gaming or productivity performance
I'm looking for some help with finding the right parts to build a pc that can run pretty much everything in vr
its a non K, so its PL is 65w
stock cooler is totally fine, just make sure to mess with PL in the bios once you get your aio
budget?
and region (us, canada, etc)
of course that depends on the mobo you chose as well
us and preferably under 1.5k
could maybe go higher
I also have a pc that runs vr but not as well as I would like so maybe some parts I could keep
https://pcpartpicker.com/list/kDYDcb if you’re willing to go over 1.5k
System Builder - Intel Core i5-12600K, GeForce RTX 3060 Ti LHR, Corsair 4000D Airflow ATX Mid Tower
https://pcpartpicker.com/list/3vrbhk should be fine for under 1.4k
System Builder - Intel Core i5-12400F, GeForce RTX 3060 Ti LHR, Corsair 4000D Airflow ATX Mid Tower
Might want to wait for other opinions before buying though
You could probably keep storage and case fans/ fan hub
Maybe the case too if you want
so I have a ryzen 5 3600, 600 watts, 16 gb ram, a case, and a motherboard so i really just need to upgrade my video card
so just how much? or something else?
The model of it
Like the model number or product name
It should say on the power supply if you are unsure
well I checked the brand of my ram its: ballistix
Ram is fine then if it’s crucial ballistix
I can't really find the power supply's
That’s fine
do you know what manufacturer? like the company that made it
if not oh well it’s ok
yeah its $43
might be good to invest in a nicer psu
yeah thats what I'm thinking
I've seen a few times in task manager that power usage is very high
oh
it's gonna have high power usage if you're doing any kind of intensive task like gaming lol
damn, I'm out of touch with good PSUs now
I forgor
but first pin in this channel will tell you in general what's good
also does the price of a motherboard matter?
not as much as the features and stuff, no
because when I first built my pc I really went cheap for stuff like psu and motherboard
If you want to upgrade parts might as well just build a new pc
I've already got the cpu though and the ram and motherboard shouldn't I keep those?
I mean if you keep the cpu that limits you to the last gen hardware
You can definitely keep the ram if it’s like at least 3200mhz crucial ballistix
If you’re just looking to upgrade only some parts i can help with that too
I'm thinking if I build a whole new PC I wanna go all out but I don't have that kind of money
Lol, relatable
So I would have to go with the 20 series?
Well rn I just wanna upgrade and I have a Ryzen 5 3600 so they're saying I'll have to go with last gen
3600 is fine
whats your current build
motherboard and ram will be fine to carry over, considering budget is tight
case probably, heatsink probably
R5 3600 is fine for up to a 3070/6700XT probably, unless you're playing esports games like csgo
psu is mostly what we need to know
600 watts
youll be fine with a 3060 ti, if it isnt a bomb.
I am definitely willing to upgrade it though
which assuming youve had the pc for a while it probably isnt
do you know the model of it?
Gamesmax or something
It's just shy of being explosive
if on that tight of a budget, this is fine https://pcpartpicker.com/product/q2K2FT/segotep-gp-600-w-80-gold-certified-atx-power-supply-600w-non-modular
Oh they were the ones that were sending cherry picked units to the 80+ validation
oh fal leadex 750 is back down to $75
Ooh nice
d.f 850 is still 90
So that and a 3060?
depending on how much you want to spend
and how patient you can be
also if you want dlss/rtx
usd?
Yeah
Evga xc3 & asus tuf 3070 ti has been $700 lately (keyword has)
. Deals/sales are sporadic, but I suggest we no longer settle at $700+ for a non-ti 3070.
EVGA should restock tomorrow if the pattern holds so you could snag one in the morning
considering 3070 non ti is within 5% of the ti, and has much lower power usage and much cooler vram...
eh
They've had ti in stock more than non-ti
I forgot they might've been that close. Often it just seems getting ahold of either is the tough part. I'll agree the 290w tdp isn't nice, but I wouldn't mind the Ti. Could always downclock a bit or something. Sure is a big wattage jump for mostly a vram OC.
3070 usually not even in stock tho so whatever you can get your hands on
what drivers do i need for my mobo?
b660 gaming x ax ddr4 rev 1.0
i downloaded the one audio driver, but what about chipset, lan, sata, vga, wlan, bios, utility
Just go to your mobo's support site
i did i got it working
just let windows handle all your drivers
other than your graphics driver, make sure to get that one straight from either the nvidia or amd website
by chance, is there an app to look purely at temps if i have to change fan speed via bios?
hwinfo64
whats difference?
There's a few ways you can do it, but that's okay to do, ya
Now w/ that in background/running, can do cinebench once or twice to see "load" temps. 
thermaltake toughpower gx1 does it have 8 pin
What wattage?
500w 80+ gold
Yes it has a total of 4 on 2 different cables
Assuming you mean the one for GPUs and not CPUs
It also has a single 4+4 pin for the CPU
im assuming they're asking about gpu
Look up your board and go to the support section then drivers.
You don't need all of them
Just the main ones like chipset, lan, BIOS, & WLAN.
Windows can figure out everything else except for your GPU one.
That you gotta get from AMD/NVIDIA
Are you following development of the SCORN PC game? It inspired me to update my GIGER PC, https://twitter.com/Mnpctech/status/1513871200136667138
Small bit of buying advice, looking to get one of those internal monitors to mount in my case. Do they have a name? Any recommendations?
It's just a like 7" monitor ik that @earnest olive uses one they just got off of Amazon they might be able to get the name for you if you ask nicely 😛
I found a couple there, but they had low ratings, so wanted to ask.
@abstract burrow what is your budget and where are you located (US, canada, europe, etc)
Message sent.
@spring hedge what country and what use is the pc for?
USA and he plays Fortnite, rocket league
good speaker recommendations? need something on my desk as a good speaker setup
For 700 right?
Yes
i found a victus 15L that’s $600 and suggested them to add $50 ram and $50 storage from amazon
Would I need to get another 8gb or 16 go and same for storage?
I'd do this for ~700
https://pcpartpicker.com/list/QfBCzf
System Builder - Intel Core i3-10100F, GeForce RTX 3050 8GB, Thermaltake Versa H18 MicroATX Mini Tower
They said prebuilt tho
I'm looking at a R7 5800x
Hoping my NH-U12S can keep it cool
I gotta update my bios tho
Planning on adding a second fan to the cooler
Ohh then probably https://www.hp.com/us-en/shop/ConfigureView?langId=-1&storeId=10151&catalogId=10051&catEntryId=3074457345620235323&urlLangId=&quantity=1
Add in this ram kit
https://www.amazon.com/dp/B08HLYYP4G/
And some more storage
https://pcpartpicker.com/product/gHNxFT/western-digital-wd-blue-2-tb-35-7200rpm-internal-hard-drive-wd20ezbx
@spring hedge ^
Yeah no
Get a 5700x instead
Bit easier to cool and cheaper
Basically negligible perf difference
ah yeah that’s a smarter choice for storage good idea
Thanks
Thanks
@fossil cedar if he does decide to build he doesn’t need a cpu cooler?
Cpu comes with one
Oh ok thanks
And if he decides to build do I get the 2 to ssd you send me as well
2tb*
If he decides to build go with what's in the list, that 2tb drive is HDD not ssd
Ok so get the 512GB
Pay 25 more dollars and get a 500w psu
doesnt matter for that pc its proprietary anyway
yep
Yea but more power
But theres no point
Depends on the power supply
K
If I can find one
5700xs are impossible to find
Or do I get the 5800x3d Lol
No they're not, what country?
I wanted to get it on Amazon for 1 day
micro center😳
It's 2 hrs away
I might take a trip there
np
Anyone also build servers here? Or just gaming pcs
I mean yeah not a rack server but you can use normal pc parts for a small/at home server
mostly gaming pcs here but there’s probably a couple people with experience with rack servers
overpriced r5 3600 on an msi tomahawk b450 in an $110 h510 non-flow with thermaltake smart psu and $500 rtx 2060 and 16gb corsair lpx ram?
H510 elite*
@elfin flame no 3090 ti or 12900ks. Weak
And no h510 elite
Or h610
Also get a gigabyte psu
Get AP-GM
if one was to remove his one pin reset switch from mobo and switch to my adapter so i can cycle through fan lighting via reset button on casing, is that gonna effect anything?
System Builder - Intel Core i5-12600KF, Radeon RX 6800 XT, Corsair 4000D Airflow ATX Mid Tower
Black build. Rgb theme.
VR/gaming use case.
Using other storage I already have.
Whats my best value, buying Used intel xeons?
you buy it yet?
If you built 4 3970xs and just used them for virtualization do you think its worth?
What are you virtualizing?
VMs probably not unless you need more than 2 cores per VM
Well I don’t want to connect my monitor to it
rather just use my main pc and connect to these and leave them in my garage ( bc i’m limited on space)
If i could build it w 256 ram,3970x 1ssd 1hdd >$6000 would be worth it
Cause atm that’s my monthly server cost p/y
If you have a real need for a server like that it's totally worth building instead of renting.
I recently got a sony dav dz270 home theatre system from, my grandfather. Although it still works, it's a really old system and doesn't work with any modern functionalities. However, it has a nice 5.1 sound setup. I plan to convert the speaker wires to 3.5 mm male connectors and use them with my PC. The only problem, I don't have the 5.1 system on my PC. How wd yall recommend connecting the speakers to the PC? Im not an audiophile by any means, so i'm just looking for a way to get that 5.1 surround ported to my PC in a method thats as cheap as possible, while maintaining quality.
I've never tinkered in the audio side of stuff so if yall dont mind, please explain any jargon in your replies
You can just get a pcie sound card
If I mount the AIO do I want the tubes tighter or loose
I'm really not sure how all that works. I've searched fr audio cards. N even the 5.1 ones tend to hv ony 4 3.5mm jacks. Which is weird bcz 5.1 shd hv 6 jacks
As long as it's not kinked, it's up to you
Just wondering if it would look better with the cords to the left
Left/right are in the same channel
ASUS XONAR SE 5.1 Channel 192kHz/24-bit Hi-Res 116dB SNR PCIe Gaming Sound Card with Windows 10 Compatibility https://www.amazon.in/dp/B07HCX1NY9/ref=cm_sw_r_apan_i_PG51KA295XBNFPXVNQNY?psc=1
This is the one I was planning on getting. It seems to b recommended as a good budget option
#peripherals-and-displays is better for audio equipment questions tbh. Some of our audio experts have this more general channel muted.
idk man theres a lot of weirdos that hang out in ther
looking at you, ghosty
@potent portal When I put it on the left side the cord hangs low and loose
Ok? As long as it's not bent too much it doesn't matter
instructions unclear
how flexible are the psu cables?
Reason: Bad word usage
ugh
i’m worried it’ll drag on the pins or something and will put my mobo out of commission. gotta crank it a hard right once i feed it through my casing. just wondering
They're copper wires. They can pretty much bend at a 90 degree angle.
If you're worried they have 90 degree adapters too
it’s sitting flush so i’ll leave it as is, check dm’s i can’t send it to here apparently
alright sounds good, i’m currently down to my last two zip ties and am stressing on cable management
worst part of the damn thing
can i use electrical tape on the back of the case? 😂
can you not wait until tmrw and go to the store to buy more zip ties 😂
you’re not gonna believe me
i’m 99.9% sure i don’t have a place near me that sells zip ties
not kidding
nearest place is like 30 mins away
fair
electrical tape probably works but its gonna be a mess to undo and will make moving your cables a pain
because they're taped down
can leave residue aswell
you can probably just sparsely use the last two and go back later to finish
save them for the more visible parts
never done cable management before, but i don’t think it’s really that big of a deal as the back panel will be on
just make it look somewhat pretty and it’s good
oh yeah mobo side is good, it’s the back i’m frustrated asf about
panel doesn’t sit flush and it’s annoying tf outa me
not gonna really matter unless somethings pinching but
still annoying to me, rather it just sit flush and be done deal
Used xeons aren't really worth it tbh unless you're on a very tight budget
Depends what you need to do with the computers if it's worth it
Good morning everyone. I just built my computer last night turned it on and it looks awesome. I am having an issue with it continuing to run. The only screen that pops up is the one below and it says that the CPU fans speeds are not available and then the CPU gets hot and then the entire computer shuts itself off. Does anyone know of any fixes for this issue?
Did you use thermal paste, what type of cooler did you use, is it mounted properly, is the fan power cable plugged in
@mossy canopy
Yes to all and ….
Shared List https://newegg.io/b5999a6
I asked a friend and he said that I should have had a cable being plugged into the top right of the motherboard at the CPU opt and the CPU fan when looking at the specs I only have one plugged into the CPU fan nothing plugged into the CPU opt as there was only one cord
@mossy venture
Well just a question first
Did you spend 3k on that
And for the cables @fossil cedar will know better than me. Im not too familiar with every specific cable
Make sure the aio pump is plugged in and the fans are all spinning
Also thats a yikes on the price
For 3k(including monitors) should be getting at least a 3080/6800xt
Lol I did spend that and all fans are spinning. I’m assuming I paid too much for everything?
Mind you it’s my first build ever lol I assumed all parts were at a good price.
Also I won’t be doing any gaming on it. It’s strictly for trading
Trading?
i dont think you need to spend 3k on pc just to trade
you can probably spend around 1.5k for a decent pc that can run you anything
and he had four monitor thats probably 1/3 of the cost depending ok which resolution he got as well
You grossly overpaid
Stocks n shares
Coulda gotten away with a 600$ pc
Maybe cheaper
yeah what? just return the cpu and gpu, get an amd chip with an iGPU
well actually if you need multiple monitors you can get cards with multiple display outputs for pretty cheap
Yeh like a gt710
10100 woulda probably been enough
at least return the overkill chip
ya know, all these day traders think they need some super powerful pc, this is like the 4th one i can think of who shows up thinking they need the bees knees of computing just to move money around
its hilarious
the only real requirement is a gpu with lots of display outputs
that can also smoothly render graphs
like any quadro from the last 8 years
ion think the 710 has enough display out
they usually do have at least 3 monitors
usually more
Gt1030s not 710
Well running 4 monitors, and 3 real time super high data up load and download programs along with discord 2 websites and a zoom call all at once.
i would have gotten a cheap 6 core cpu, cheap motherboard, cheap ram, quadro with 4 DP out, gigabit PCIe nic, all for about 800 or so dollars
would work just as good as your current setup, and would consume significantly less power
also it would be pretty tough to overheat
Thanx all for the help obviously my “peoples” don’t know what they are talking about haha. It’s all good I got it learned my lesson and I’m okay with it. At least I know I’ll be able to trade with it for a good while and won’t have to upgrade. Thanx all for the help. Gaming might be a part of my life the. Haha.
as for your issue, are you sure your cpu is actually causing a thermal shutdown?
do you have software to check temps?
the cpu fan speeds not being available and the system shutting down could potentially be two seperate issues
Yeah it got hotter
yeah theres definitely something wrong with your cooler mounting pressure
200 then it shut off
i would shut it all down and pull off your cpu cooler
Okay sweet
If using aio, check if you plugged in the pump
check your mounting hardware, make sure its all installed correctly
check if there was a plastic seal on the coldplate
Nah to be fair you cannn do that but traders have a lot of stuff open etc
a 6/12 chip would def be more than enough
I'm gonna guess it's mounted improper or you left the plastic peel on
Would be enough vs good are different
more than enough
better than good
esp considering the amount of resources all those pieces of software use
the thread scheduler can handle it
I'd say not more than enough for how much day traders have up personally
32gb of ram would be more useful in that department
just because software is open doesnt mean its doing anything
When traders have 4-6 screens open I'd say it's doing something lol
yeah but theres no way the IPC of the 10400 wouldnt be able to handle it
would run all 4-6 of those applications on a thread or two
Yeah it would work sure
Idk what an aio is
an aio is an all in one
you don't need to do anything other than mount it
and install the rad on if the aio has fans preinstalled
otherwise you put the fans that it comes with by yourself
A liquid cooler
all in one liquid cooler ya
aka it’s kinda like water cooling but they set it up for you
Thought so
Needen some help over here
with what
!ask
Thus computer has a geforce 2060 in it and I can't get both display ports to work
What’s the issue? is there no display output from one of them
Update drivers
The graphics card has a hdmi and a display port i have the hdmi going to one monitor and display going to the other
The display port is the one not registering
It's at someone else's house they do not have a extra cable
Try updating drivers, if you haven't yet
After that, switch cables on the two monitors
To test if the monitors broken, or if it's smthn else
Tested both monitors with the same hdmi and they are both in working condition
what should i do
wdym
anyone able to see if my build is compatible? thank you
Do you have a link? You can DM it to me
sent, thank you
@brisk brook now 1600mhz ram, at cL 16-16-16.
. Good lookin rig
u guys have a suggestion of 1.5k(cad) including peripheral and monitor including tax to it?
i have seen somke leaks of next gen intel and i dont know if i should still get the 12600k
i wouldnt get the 12600k in general
if gaming, 12400f is great
if you want more cores for other stuff, 12700f is nice
if you want to overclock with a bunch of cores, 12700k is well priced rn
i mean 12600k is like 30-40 bucks more than 12400f
eh
way more than 30-40
12600 non k is 30-40
but not much other than better igp over a 12400f
yeah i ment that
12600 non k is $60 more actually rn
or i was thinking of 12600
But 12600k gets ecores
yeah but k sku is $100 more than 12400f
your a mod?
so thats way past
Hello, anyone available to check if my build list is compatible? Thank you..
https://newegg.io/fc98b43
Yeah we had a meeting today, most oranges are reds now
whos still an orange?
is it fun being a mod?
Define fun
im not seeing a list
System Builder
also, put your parts in this
haveing enjoymernt of what your doing
neweggs pc builder will only show newegg prices
thats the definition of fun for me
I enjoy the part where I help people with tech. I just happen to have proven trustworthy enough to help with the higher level stuff.
Ohh ok i'll make the list in pcpp real quick.
great
well im happy for you
yeah congrats
"Lol almost nothing changes between orange and red"
"I just have the power to delete all the channels now
"
lol
https://pcpartpicker.com/list/2Zg2Vw (I'm planing to use the case that I already have: https://www.newegg.com/black-cooler-master-cm-690-ii-atx-mid-tower/p/N82E16811119216 ) (reusing windows pro 10 that I already own, and reusing hdds and ssds that I have..)
so your budget is like 2800?
budget is about 2800-3500
what will you do with the pc?
working for creating computer graphics (using softwares like Maya, Houidini, photoshop, video editing, etc)
ah ok
im not very familiar with some of those programs so ill let someone else build the list better
for 3500 you could easily fit a 3090 in, but i dont think itd be the best value
yeah,.. it doesn't have to be like the newest, if the components work all together ok, that'll do for me.
I need help I installed a liquid cooler now my pc monitor isn’t picking up display
you have plenty money for all new parts
The pc turns on and everything but the monitors aren’t picking up display
Did you use the star method when tightening the cooler on?
What is that
A way to evenly apply torque, but we can circle back to that
First thing we can check is cables
Is your 8 pin CPU power cable plugged in?
Yea everything is plugged in
And are your gpu (if you have one) cables plugged in?
Ok
Next, we could check ram ig
It’s plugged in
Yeah
But I mean like taking a stock out and putting the remaining one in other slots
Then we can narrow it down to CPU, GPU, or motherboard
It only has 2 slots
Ok
You mean take 1 out and see if it works ?
Ok
Then move the remaining one to the other slot
I would have to take my whole cooler back out
Hmm okay nvrmind that then
My personal suspicion is that the cooler is clamping on the CPU so unevenly it's not working
Is the cooler touching the ram then?
I can’t send pics here?
DM it to me
Ok
Here is the star pattern btw
How do I know
If you torqued one screw really tight, then moved to the next, that's a sign of it
So do I go check the screws
Generally you want to go around and tighten a screw a bit, move across to the next
Ok
@potent portal you think it may be uneven/too much clamping pressure?
That's what I'm leaning towards
ye if you cooler too tight your pc doesnt work
It could be
i forgot who it was who had that problem maybe sudo
It can usually be pretty tight, it just has to be even
But it could also be the radiator pressing on the memory
So tighten them all the same amount of pressure
yes
Yeah
Ok
Looks like the hoses barely brush past it
Doesn't look like it's under much stress
when'd this get added
The hoses sure but the fans on the rad are over it, can't tell if touching
They aren touching
It was working before I put the cooler in
Then when I put it in the signal wouldn’t pickup on neither monitors
I didn’t unplug anything
I don’t think they are but I don’t really know how to even then all
