#building-and-recc-chat
1 messages · Page 633 of 1
So I got a 5500xt, but the fans aren't spinning. The GPU is working fine besides the fans
does it have a 0rpm mode when it is idling?
the worlds not gonna blow up if u do
id just test everything to make sure it works and mess around overclocking but thats me :p
okay ill wait for everything it seems like the safer option
Makes sense to wait to see if a 20GB RTX 3080 is in the works? So conflicted
I wish more 3080s were available. They all sold out so damn quickly:(
@deep skiff 0rpm all the time
My old gpu would have rpms even when idle
@little osprey that's why I didn't budget for even though everyone said to
Ik they would sell out in the first 12 hours
I dont know whether to get a 3080 or 3090 when they are available
Hate having a 1440p monitor and not able to use it at its fullest capability :( even though i have a 2080ti it still struggles sometimes on 1440 :(
Rich boi
upgrading from a 2080ti to 3080
Now I understand what steve meant about e-waste
2 pins on the corner of my cpu were a little bent but i bent them back, it should be fine right
One way to find out
I dont have all the parts yet
Good luck
Should I get a 4000 series Corsair case? I love the look and ive heard it’s good
Meshify C
I hate the front panel I can’t lie. Too much for me
meshify c front panel looks nice
@polar prism how about p400a?
That was my backup. I want icue tho and you get a lot of fans with the Corsair
@stoic island thanks for your help
Hm okay I’ll have to decide then
Ye
But it’s more of an issue when I actually get the 3080 I want 
Yeah. What I was thinking about doing was taking the panel off of it’s too bad or buy the mesh front panel later old
Idk
Yea
Also, what PSU brands are good? I haven’t been able to decide between EVGA or be quiet?
All brands are good its just some models are bad
corsair usually is good
Okay thank you! I’ve heard a lot of people don’t like some and like others
like the rmx psus
Ye RMx is a tier
I might get Corsair to match with the case potentially
Corsair RMx is great, Corsair CXm is trash
EVGA P2 is great, EVGA N1 is just.... ied tier
P3?
@polar prism honestly i would go with the 4000d airflow
What about the Coolermaster TD500 mesh
also, did evga ever make a p3?
they refreshed g2 with g3
and made the b5 thing
TD500 Mesh is good?
Lian Li Lancool Mesh II?
but anyways imo, P500a=TD500 mesh=Lancool mesh ii>P400a>500dx
It’s between the p500a or 4000d-x for me
Lian li is good tho
I don't really want to recommend 4000d until GN reviews it :P
But other reviews seem decent ig.
Hardware canucks said it was very good, but airflow stock with the glass isn’t amazing
Still better than NZXT
As long as it’s not too hot I could care less tbh
A 5% increase doesn’t make me any more or less interested in a case
anyone know if the asus prime b450m-a motherboard can support ca 4250 writing speed gen 4 nvme?
im looking for a bunddle including a ryzen 5 3600 with 3200 - 3600mhz ram with a fan and motherboard ( no overclocking ) if any one can help me find a good deal i would extremly apreciate it!
Alright
ive been looking to getting a new gpu since i panic sold my 2070 for 410 USD. and i found a 2080 for 400 USD... should i get it?
i doubt ill be able to get a 3070 since the demand on it is higher than the 3080 and the 3080 literally sold out like 5 minutes
plus restock will take a while...
Nah it won’t
Maybe get a cheap Temp card
Airflow is like 1 of 3 things I care about in a case
They already have canceled a lot of orders for the 3080 and are limiting the sale to one per customer so it won’t be bad
Fitting components and spacing, CPU cooler clearance, and airflow
They’ll sell out but not instantly
That's all I care about because that's all that matters for performance.
Yeah the 4000D is a little small
wait wym theyre limiting it to one per customer?? where did u find that out?
Won't be so bad is still speculation
i mean 3090 launch is almost here
I have, I think they will sell out in 1-2 hours but not so fast this time
Nvidia also needs to make it better or RDNA 2 will steal a lot of sales
should we wait and see when the 3090 drops?
Yes
if not then ill just get a 2080 for 400 bucks
But there will be 3080 restocks next week
Yes
oh if thats the case, then i could just wait till 3070
There were bots that bought more than 10. That was the issue
what if the botters just did better
:/
A single script that quite a few people used bought up hundreds of cards afaik
We don't know how the script is coming along
so we won't know until the next launch
well the 3090 comes in like 4 days
There won’t be any other 3080 “launches”
and restock for 3080 is next wek
I mean 3090 and 3070 launches
How many PVM fan headers does the ASrock phantom gaming b550i have? Some places say 2 others say 3.
Yes, bots will probably be bad in those but not the same as 3080s
That was something that the companies hadn’t seen before so it wasn’t expected
one sec I'll check for you
plus the demand for the 3070 is higher than both the 3080 and 3090 too
ughh.... i hate this
The 3080 is high end relatively
its either, i get a 2080 for 400 now, or wait and have a possibility to get a 3070
I will be honest, if you want one that bad I’m going to say you can probably get one before December
3080s will be easier to get in October, 3070s in November, and by December it’ll level out a bit
hmm... i mean i guess i can use my intel core 2 duo laptop for schoolwork till then
so 3? @stoic island ?
3 total
thnks
but u think i could sell a 2080 for 400?
i could use a 2080 for now and wait till the to gain some cash
Is it worth to buy a cpu cooler indtead of using the stock one?
cuz on hand i only got like 410 since i sold my 2070 like 2 weeks ago
3700x
@little osprey e-waste? Lol. I'll try an sell my 2080ti so its being used. I just want something thatll run at 1440p well and my 2080ti sadly isn't. Unless of course there's something wrong with my system thats holding mine back. I plan on doing a fresh install of windows to see if it'll help.
2080ti should run 1440p
are you sure your thermals are ok and you're not throttled or being bottlenecked somewhere else?
so im on my new build, and idk what kind of gfx card i want to use.. any suggestions? i have a mid tower case and my budget is $400
❤️
hi
It is
even 650 for oc is good enough
You said to get rmx
Mobile is hard
Corsair?
corsair is good
I just click whatever is at the top that looks decent
hahaha
Seasonic GX Or cosair RMx?
Good
I got a 5500xt instead of a 3000 series
but why
Gigabyte?
Yes
Doesn’t Gigabyte have hot VRMS?
O
@cloud oasis because 3000s will be in high demand for the next 6 months
That too
I want a B550F
imma just get the asus tuf x570
I have an Asus rog syrix b450
Ok
Also
Is there a better cpu cooler i can get
I don't know the coolers very well
honestly same
@cloud oasis just search up what the internet reccomends
Yeah
If you're getting an AMD you'll be fine with stock
oh yea whne u install ur nvme, if not already, put in the standoff ebfore screwing it in
hes oc
As long as you don't OC
but not for oc
Of course not
If you're OC, I recommend liquid cooling
Kraken Z63 AIO looks so good tho
@cloud oasis are u doing heavy oc
And you would be better off getting liquid
Ill try to do heavy oc
I have my cpu set to automatically OC as needed
just make sure u dont fry or mess up
Still though @cloud oasis before you OC just test it and see if you like how it preforms
fry? 
Because there's no point in OCing if you're not going to have a use for that power
well, if u do it terribly, then maybe
but
following a yt video
should keep u safe
Usually windows will shut it down before anything happens
So would i be ok if i follow a oc guide for 3700x
But whatever you do
yep
ok
Don't change the volts until you need to
dont forget to install drivers
i will
The volts is what frys cpus
@cloud oasis just remember, OC is done at your own risk. And dont OC anything that you cannot be without
ok
Yeah oc is not covered by warranty
That's why I have mine set to OC only when needed
Linus did that right?
increased human performance
Where he oced his peripherals
he literally would
If u get fe u cant oc as much as aftermarket right
linus does everything possible with a computer
Ik pretty sure he can
Like the fe will be hotter than aftermarket
Do you mean if you get the stock cooler?
If u oc
uhhh
Graphics card
whats fe
Founder edition
o h
ohhh
Why not
the stock performance is very good
Are you planning on playing crysis?
yea what games
will it make my fps better?
If i do oc
Slightly
I played a bit of Crysis remastered on high graphics and still got 60+fps with my 5500xt
Overclocking results in more heat
So i get aftermarket since it has better cooling
but he has pretty good airflow i think
Planning on getting evga one
Pretty sure I coulda gone ultra
Otherwise you'll overwork the others
wait is this ur first time or
First time

I started to OC about 2 weeks in after I broke my pc in
ok, just first dont oc, and then see how u like the fps
ok
and if not happy,then u can try
im getting 280hz
No point in adding spice to eggs you haven't tasted
Dont try and oc to like 8Ghz make it reasonable
Monitor
W h y
why not
Just get a 144
why not

Get a 1440p 144 hz
no
Not a 1080 280
hahaha
you're wasting quality for quantity?
Csgo?
cries in 60hz
280 isn't gonna make that much of a difference over 144
And 1080p is best
Unless you're at the e sports level
^
no im not gonna play csgo much
but i mean, if he got the moeny
Maybe esea or faceit with friends
Still though, it's a waste
might as well
You can get a 1440 144 for 300
ye
I think its not bad
but im chillin with my build
without oc
u can still achieve RLLY high frames
cause u got the 3080
Koopa u play valorant
ye
How much frames u get
uncapped?
Yea
A 3080 for valorant? 😂😂😂
a lot more than 400
Im not only gonna play val
vlaorant is not a heavy game
Talk about too much
wait how
it just isnt
Valorant is not a heavy game
It has no shadows
my friend has a 1660ti and he only gets like 165 fps
A non OC 8GB 570
But my other frend has 960 and he gets voer 200
Or LoL
Cpu bound game
Yea but my friend has 1660ti and runs less frames than 960
u literally only need a single core processor to run LoL
but my 960 ran like 144fps
@plush mist wrong
the minimum requirememts
why is that
I had a dual core and couldn't run CSGO
dang
but, the message is, ur current setup with no oc, can run pretty much all games at high settings with well over 100 fps
i dont want it to happen with my 3080
or at teh bare minimumn, 60
You will NEVER get bad frames with a 3080
u got like pretty much the top of the line specs
Not for like 10 years
that money can buy
No like at least 300 fps
Ye
Ok
i just cap mine at 169 cause i got relatively slow internet
When i get it ill tell u if its under or well over 300 fps
ok, just try playing a couple rounds without capping
if ping is sky rocketing
then just cap it at like 300
oh my pings chillin
yessir
cries in 17 MBps download
u should be good then
have fun building 👍
and if u ever got any trouble during building
dm me
or come back here
just expect to take more than 3-4 hours to build and setup
for first time
when in doubt, read the manual
especially for the reset switches and stuff
warranty?
unelss u dont want to pay for that
i personally didnt
was on a tight budget
hey
is pcpartpicker pretty accurate with their compatability checker?
like if i buy a power unit will it make sure it has the right plugs and pins for whatever else i put in the pc
yes
yep
aweome
also i ran into a problem
the 3080 wiill have a 1.4 display port but my monitor has a 1.2 display port
converter?
do they make them?
i'll look for u
ok thank you
DisplayPort 1.4 cables are entirely backward compatible with older DisplayPort devices too, whether you're using a full size or Mini DisplayPort connection. While there is some benefit to buying a device that supports the DisplayPort 1.4 standard over DisplayPort 1.2, if you're comparing DisplayPort 1.4
searched this up
can anyone help i just built my pc and having a problem every time i turn it on the rgb turns on fans spin but when i connect my display port or hdmi to my pc from my monitor it says no hdmi or display port signal detected
so if u got a 1.4 cable, u can put it into the 1.2 port @prisma stag
o ok awesoem ty alot koopa
yes
@mild trout I dont think I'm having any bottlenecks. I9 9900k with good Temps(60-64ish celsius) while gaming and my 2080ti doesn't go above 65c.
yes
i checked them
aight
i have been having the problem fro a week now
are you connecting the monitor to the gpu ports
yes
hmm
sure
ok
@mild trout not sure if something else is causing lower fps at 1440. Hell even 1080 Im getting weird fps. I don't know why. Gonna try a fresh install of windows on my m.2 ssd instead of tje older Evo 860
hmm
should be smt to do with ur cable or monitor
have u tried switching through the inputs?
not cable i tried 3
ah ok
oh ok
See if there are any debug lights on the board
#old-monitors-and-tv may help
what
What is your motherboard?
red, green
Koopa stop
brb
k
@deep skiff do you know if the board has debug lights?
Can't find anything about the debug lights on their website
Ok if It doesn't have a debug light make sure the hdmi cable is plugged into the gpu and not the motherboard
tried mobo and gpu
Don't bother with the motherboard
yo anyone got any extra pc parts laying around they dont need XD
no
no go away
Maybe try a different pcie slot
lol i will go
is it safe
yes
is it safe
is it or is it not?
maybe it is, or maybe its not?
ok i try\
yes it is
lol
i need someone to help me when they get time please
Sure how can I help
i need to find the right dp cable for my setup
thatll allow me to run 144hz at 1440p
my monitor is ASUS TUF GAMING VG27WQ 27" WQHD 2560 x 1440 (2K) 1ms (MPRT) 165Hz (Max) HDMI, DisplayPort FreeSync DisplayHDR
and my gpu will be rtx 3080fe
monitor has 1.2 display port and the gpu has 1.4 display port
Just use what ever. Comes in the box
Does the cords come with the gpu
i have no idea
thats why i was asking for help lol
i bought a 165hz monitor so i dont wana get stuck with a cord that only does 60hz at 1440p
but idk what to get
Then just buy 1.4 display port
err can u reccomend one?
this is a good one
@prisma stag
amazon has plently
just search up 1.4 display cable [length] [refresh rate]
yep np
Mmm
the ryzen 3700x stock cooler is somewhat powerful so you might be able to do a slight slight OC but you might not be able to do a crazy OC on it
@cloud oasis why do you even want to OC?
With the stock cooler you may get 0.2 GHz
let me rephrase, what do you think you will gain from doing a OC @cloud oasis ?
@whole stag it was not a question for you :)
Im just saying
whats the best way to figure out if a nvme fits my drive and flash code. about to buy a western digital black 500 gig nvme, i have a ASUS ROG MAXIMUS VIII HERO
Cuz the 3080 relies on cpu heavily for gaming
not that heavily
what i heard from jayz2cents benchmark
So im chillin
Right
Also do i put the m.2 nvme in the thermal pad slot or a normal one
Probably the one with the heat sink on it so it stays cool
ok
stupid questoin do you plug monitor into gpu or motherboard
Sheesh 2000 wish I had that much lucky
UNLESS You have an APU
Yeah
Uhh
@little osprey is that your old board or something
What board should I get?
@cloud oasis wdym I love MSI bios it's so much better than others I've seen???
Like what's wrong with the bios
Please don't tell me it's a "didn't boot bios issue"
i jsut bought the MSI MPG X570 GAMING PRO CARBON WIFI ATX AM4 Motherboard
did i screw up
im just saying what my friends told me
For some reason, there's a huge wave of random reviews blaming not booting on msi boards due to "bios issue" without elaborating
And no reviewers have found any issues
my friend had a msi bios
and it kept turning on and off like 9 times
He had to wait like a hour
Sure it wasn’t a psu issue or something
So my conclusion is that people just didn't boot, looked it up, saw someone had issue with the BIOS, and assumed they also had issues with the bios, and it came to be.
@cloud oasis I think they need to look up the definition of insanity
lmao
So I should keep it or get a different motherboard. I’m new to this I had orb718 help me out he knows 10x more than me.
just get the msi
Don't turn something off and back on again 10 times and hope something will change xD
ok
@little osprey I say keep it, pro carbon wifi is a pretty good board.
Wait wrong guy
are there any mother boards that have wifi but dont have the ugly wifi antena out of the box?
@little osprey what out of the part list do you have?
@prisma stag if you mean the big block looking antenna, all wifi 6 included motherboards use those for whatever reason
Yeah. This is my first one. Was buying something from Xidax lol and a few told me to yeet that and cancel the order lol
By far tbh this PC is 10x better than what I would have gotten
id take that cpu cooler off and get u an ssd on the list
Hmm see that’s the thing I’m new to this. I don’t know what’s good what’s bad. Don’t want my cpu to end up getting to hot and frying itself also
Here I’ll show you the specs of what I would have gotten if I continued with Xidax don’t hate 😂
GPU paste?
wym gpu paste
What is gpu paste
You mean thermal paste?
Thermal paste I think is obviously a paste but you put it on it then put a fan on it. It’s like a heat shield from what I’m thinking lmao I’ve never built a PC or an so don’t take my word for it
So like heat wrap for like headers for like a car, it help keeps it from getting to hot when your putting out a lot of power through your motor. Basically that’s what thermal paste is. It’s like a shield
i need help with my new build. if anyone can help
i just need to know if all these parts are compatible with each other.
@covert sequoia they are.
@little osprey uh no, that's not what thermal paste does
The easiest misunderstood answer is that it helps conduct heat from the CPU to the heatsink to be dissipated
Ah ok lol yeah I don’t know anything then. Just seems like that is what happens
thermal paste = interface between the heatsink contact surface and the surface of what you are trying to cool.
But what it really does is help fill in holes between the surface, because nothing is perfectly flat.
and when those holes are filled, heat can be transferred more efficiently
@little osprey the cooler that comes with ryzen cpu is decent you don't need that cooler
Ahh ok thank and oh does it
one more question. doesn't the mother board come with a cpu fan ? or no.
@covert sequoia nope
alright thanks.
212evo is a bit weak for 10900kf ngl
212 evo is the b450 tomahawk of coolers, except, its not actually good at anything imo
So I took off the CPU cooler since it already comes with it what should I do then
It's just so mediocre it's bad
wait for @stoic island to get you a list @little osprey :)
ok let me recheck that real quick. its only have had bad luck with water cooled
@little osprey I'm making you a new list and telling you why it'll be better :P
Ok bet thank you
@little osprey revision 1: https://pcpartpicker.com/list/PtGyDx
@covert sequoia oh god what tf is that
@covert sequoia simple answer? No.
I've never seen anything like that
@covert sequoia something like noctua u12s
I’ll save that also I’ll make a notepad on my phone lol. But like what I wanna do with this PC is play games, do GFX and VFX (learn)
Compared to the original list, better CPU for gaming, better mobo for future proofing and all at same price, added a SSD, better GPU, better case, better PSU.
ahh ok bet like I said I don’t know to much so I’m going off of peoples word know what I mean
should we go water cooled ? my last one died on me
uh what?
So what makes the 5 better than the 7 also tbh water cooled in my opinion is cool but hard to manage
No need for watercooling
Because 3600 is 3rd gen on Zen 2, 2700x is 2nd gen on Zen+
They had good iPC gains for 3rd gen which amounted to better single core/thread performance, which contributes to gaming performance.
well rohxs you are in the right community to learn then there are a lot of people that know a lotttt about computers
Ahh ok well then I’ll get the 5 and true I am glad I joined this discord and canceled my order for a pc that would burn up instantly lol
i cant find the fan you mentioned
So what makes the bored you put better than the msi b450
B550.
Oh ok
@covert sequoia was that to me or mr1111?
you but i he found the fan for me
if you want our specific attention please use the @covert sequoia mentions :)
is it a nono
Just use the stock cooler on 3700x at that point :P
stock
Stock with 3700x. Free.
Gammaxx 400 at 25$ isn't really an upgrade, but side grade if stock makes too much noise.
I'm not liking that ram choice, PSU choice, or case choice.
I picked 3600cl16 ram because 3rd gen Ryzen benefits from higher freq ram.
EVGA W1 is just.... a bad PSU, Corsair CX550 does the job just fine.
Damn lol I wanted some what of RGB inside 😂
Case is mostly your choice, but that doesn't give me hope for airflow...
idc about the fan noise
Hey the case I picked earlier came with RGB fans :P
As long as it isnt a jet engine
True it did
I’ll find another lol
Imma stick with that memory I have though tbh.
How bad would it change
we cannot force you to get parts that perform well @little osprey, just please remember we have NO problem telling you "we told you so" when you come back later on asking why your machine performs worse than streamer mcstreamer you are comparing with :)
Stock cooler is fine right
lol
I guess
@prisma stag pcpartpicker is a thing.
U dont have to buy windows
corsair has a RX PSU?
well even if you dont activate it
u can put something into cmd or something to make it think its activated
well a key is like 20 bucks ill just do it right haha
5$ on ebay actually
thanks tho @cloud oasis
20$ is pretty overpriced :P
Waste of 20$
You can't just tell windows it's activated, what you can do is enable everything that's disabled by not activated windows
You can get rid of watermark with regedit, you can edit wallpaper in a specific way, etc
actually its $2.91
Yea 3-5$ is where they usually go for on e bay
Would good quality thermal paste change performance with a stock cooler
a bit
but decent thermal paste has little difference compared to "best" thermal pastes
o cool thats good to know, i migh just bvuy the ebay key then haha
noctua
i love how bad the names are lmao
:))
WINDOWS 10 PRO PROFESSIONAL GENUINE 🔑 LICENSE 🔑 KEY 🔑 INSTANT DELIVERY 🔑.=
Whats the best thermal pastes
kryonaut i think
kryonaut
the kinpin paste forky talked about a while ago
i need the 3080 to come bak in stock =[
simply not something you need to think about @cloud oasis
l i q u i d m e t a l
do yall think itll be months before its able to purchase without f5 spamming or maybe just weeks?
i think u could LM a cpu
there are about 100+ other things you should focus on before you get to that @cloud oasis
We won't know until it happens :)
ok link the thermal paste i should get for stock cooler
@foggy hazel like?
ln2 thermal pasteeeeee
@cloud oasis dont bother with extra paste for the stock. Use what comes with it.
Eh Naed, it's worth if you want it to come off easily next time
its preapplied
kpx is clearly the best thermal paste kingpin overclocks it when he ships it
Preapplied
I dont like pre applied
@stoic island you are setting yourself up for a endless cycle on this one. so just no :)
awww
get rekt
@cloud oasis have you built before?
nope
I just want to post this link and go do homework
❤️ 
https://www.amazon.com/dp/B07MXFTNZY
would a 400mhz difference between memory speed be important?
then how can you know that you dont "like" preapplied?
overpriced lame @stoic island
cleaning wipes tho
I dont like the idea of it
$13 for a paste
whatever
3200mhz and 3600mhz on Ryzen 3rd gen yes @cunning knoll
so it depends on specific situation.
if im cheaping out and not buying a cpu cooler would it be bad idea to overclock
@cloud oasis i think i am going to leave you in the hands of @stoic island, he likes answering questions like that.
I dont like the idea of it
@cloud oasis well
hehe
I think i get this https://pcpartpicker.com/list/dxLMPn
it's better than applying paste yourself
look its the verge thermal paste applicator
since you never built before
I think I go do homework and leave :P
Yea but is building a pc not easy?
cya
just do an x with 4 dots on corners
cya
Yea but is building a pc not easy?
@cloud oasis It's easy
It looks ez
@prisma stag x method works
I got really nervous for nothing
no need for 4 extra dots
same
just read your manuals
extra dots are suggested for xeon/tr iirc
but find the manual online cause sometimes the ones you get are garbage
happened to me
yours was the quickstart guide @granite delta
there is a big difference between that and the actual manual.
oh what
@cloud oasis Get this if you want to reapply thermal paste.
https://www.amazon.com/dp/B07MXFTNZY
because cleaning wipes for cleaning old paste :)
I though it was the manual
Because 
this is bs
Can i just use baby wipes
again, there is a reason i kept on linking you.

yes I know naed
whats the difference between G.SKILL Ripjaws V Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Desktop Memory Model F4-3600C18D-16GVK and G.SKILL Ripjaws V Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel XMP 2.0 Desktop Memory Model F4-3600C16D-16GVKC ?

I believe different dies
CL18 vs CL16
and that
ok
for a ryzen build specifically
for a intel build, you would prefer to go even lower (both speed and CL)
Do i get 2tb 7200rpm hard drive or 4tb 5400rpm
Managed to somehow disable HDMI out. Display port still works
I’ve tried different bios settings, updated drivers. Will not detect or output to HDMI anymore
Updated bios. Pretty sure it’s something stupid, or the HDMI out actually broke day 2 of build
check your cable in something else @night storm
just to sanity check yourself that way
Tried two monitors, two HDMI cables, Both work HDMI on laptop
☠️
@cloud oasis jokes like that are NOT welcome here.
@cloud oasis you wanted help when you had a question. then respect it when others want help for theirs
That’s what I’m doing right now. Love the one black screen
is that not a answer tho
@night storm could you give me a shot of the input side of the gpu?
hm, nvm then
i can explain it easily enough for mainboard IO
you certain your mainboard is "all" the way to the IO shield?
You are trying to run the second display off apu?
basically, is the hdmi getting ALL the way in. <- does that make sense @night storm
@whole stag its not APU on an intel. Its igpu
Oh
im about to order a pc is the websites safe to order from and is this a good pc
see above question @night storm
Doesn’t the igpu disable itself when a dgpu is in use?
Yea io as close as it can get to motherboard
depends on mainboard and bios settings @whole stag
Bios I have dual enabled
darn @night storm
Huh
Tried it both ways
you tried a bios reset?
Yup
Had to reset ram speed so I know it actually reset
So originally I had io on outside of case HDMI was working
well, the general piece of "speculation" i would fall back on would be the same as IF one of the ram sticks wasnt being picked up
which is mounting pressure
im about to order a pc is the websites safe to order from and is this a good pc https://ca.pcpartpicker.com/list/vCDwTC
But thunderbolt could not reach deep enough
@hazy ridge have patience. people will answer when /if they want.
and iirc, this is not remotely your first system right @night storm
sorry im at a tight time span rn
Last time i built was 2013 so its been a while but we had HDMI back then too. 😝
@night storm mounting pressure = pressure from the cooler on the cpu
IF there is not enough, contact wont be made with everything that needs to be made
(again, this is VERY much a long shot)
It’s snug, wouldn’t want to tighten it more than it is
fair
It’s gutentight
@hazy ridge long story short, not a bad build, but not a good one either. You could do better for the same price., but that is the limit of my time for your build now.
im in cad btw
i know, its right there in the link :)
what could be better im on a tight butget
It’s detecting all the ram and I got nice clicks when installing
Thermals are fine cpu core and socket 36 c
So I would think it’s cooling alright
@night storm sorry to say, i am out of ideas right now, and also out of time :/
Well thank you for your time!
best of luck with it
Appreciate it! Have a good one
last one, check the bios updates for the mainboard btw
another long shot
but maybe
Just installed updated one 🙂
its all up to luck and google then :)
Haha yup
Intel igpu drivers?
Yes most up to date version
Huh
Might just wipe computer to 0 and reinstall everything
How did you go about resetting settings? reset cmos correct?
are the pc sites safe to order from or should i order from amazon
the reset to default inside bios might not do everything.
(Just going off random ideas at this point so)
Yes, power off unplugged, power supply off power button several times
Alright good.
Then hit reset cmos button held for 30 sec
What about CMOS Battery?





