#cases-psu-and-cooling
1 messages ¡ Page 56 of 1
đ
what case do u guys recommend that is under 100 dollars but will still look good with rgb?
Is 80+ bronze alright
TD500 mesh
can you give me 3 options to pick between?
i been trying to pick a case for a long time
TD500 mesh, Coolermaster H500 (no suffix), P400a, P500a, Lian Li Lancool ii mesh
that's the standard lineup I'd give you
will rtx 30s fit in nzxt h510 elite?
Should I get a semi modular PSU?
Why not go full modular @scenic lance
https://www.amazon.ca/DEEPCOOL-MATREXX-Supported-Motherboard-Addressable/dp/B07ZNFWDPC/ref=sr_1_4?crid=34A6TVNVX31LB&dchild=1&keywords=deepcool+matrexx+55&qid=1606956856&sprefix=deepcool%2Caps%2C351&sr=8-4
is this case decent enough, i've heard some bad stuff about it but i already bought it and I dont really wanna return it
which is better in your guys' opinion, lian li lancool 2 mesh or a fractal design meshify c
Maybe the meshify c if you add fans, stock for sure the lancool 2
im kind of dense, but you mean stock fans when you say stock right?
the included fans
Lol
What's the rest of the PC?
I'd say 650w will work, and 750w for a bit of headroom.
ok iâll go with 750
@scenic lance do keep in mind, Model>Brand, and efficiency rating doesn't tell you about quality.
reliable brands and models?
Phanteks Amp, Seasonic focus GX/GM, Corsair RMx, Enermax Revolution D.F., XPG Core reactor are some good ones to start off
ty
@elfin trout i did it
I figured this fit better here than "peripherals"
BR1500MS2 or CP1500PFCLCD
for ups (my power supply wants a pfc sinewave)
Nice
dang this must be the 3rd day my case aint arrive 
So I'm looking for an 850w 80+ platinum psu , was going to go with a corsair HX but they seem to be either out of stock or super marked up. does anyone have any recommendations for something comparable in that like about 200$ USD price range
Fractal Design Ion+ @lusty moss
Try the ones from seasonic
found the fractal one 11 left in stock on amazon so gonna try for that , these marked up resellers have been the bane of my existence while trying to build
ty peeps
np
There's like 3 rules for PSUs
1, 
2, Efficiency rating doesn't mean quality
3, Don't cheap out on quality
- Have a bit of headroom on your 12v bus
Meh, if you limit boosting behavior you can just go by tdp without going for headroom
And overload works on good PSUs
I'm looking at the nr200 for my first itx build but I'm unsure if my ATX PSU would fit in it. Its a Seasonic Prime Ultra Gold and I was wondering if I could use a ATX to SFX mounting adapter or if I have to buy a new psu
@latent light look up the PSU clearance number on cooler masters site
and then look at the length of the psu
@tender root 130mm listed support, but it also has two different PSU mounts and boasts that you can 3d print brackets
it was not you that should do that research @elfin trout
(I was curious :(
I like the nr200 as a case)
Anyways I'll let them do the rest of the research, but I was very interested in that you can get SFX to ATX brackets for the PSU
a sfx to atx bracket is a normal thing for a LOT of cases @elfin trout
its "just" a extra insert after all
Hm, why's that? Isn't the whole point of sfx PSUs is being smaller?
yes
and if you have a case that supports atx
it also supports sfx (by using a adapter)
which frees up more internal volume
Like what is this thing then
Nr200 has psu mounted like hanging
Anyways it might be NR200 design allowing for atx and they just didn't do it
yes, for the nr200
go back a bit, and see that i am talking about cases, as in, cases in general. and in particular, the atx spec
any case that is designed with a SFX external access cutout, wont have physical dimensions that allow a ATX to be mounted there
no
Are the Coolermaster mwe psus anygood?
mwe gold are good
Ight
i think the normal mwe were kinda crap
I was planning on the gold
wait doesn't the cooler master logo interfere a bit?
what does it interfere with?
read some reviews regarding that but eh if you've got space go for it
interfere with?
like it sticks out or sum
its an ATX psu...
yes
there's probably cheaper cases that have good airflow I'm sure
but I look the look of it
it might be longer than normal psus, but psu length is a spec listed for every case
Wait what's wrong with the PSU I sent?
If it has a gold + rating it has to be somewhat good right?
I do see yes
does anyone here have a 5inch rasberry pi monitor mounted inside their o11-d?
Aight so if I wanna go for a reputatabke brand, I should be going for something like this then? https://www.newegg.com/gigabyte-gp-p550b-550w/p/N82E16817233030?Item=N82E16817233030&Source=socialshare&cm_mmc=snc-social-_-sr-_-17-233-030-_-12032020
It's by gigabyte and they the same ones who made my mobo so
550 bronze should be enough to run my gtx 1060 and ryzen 5 2600x right? My current 430 watt 80 plus can't. System hangs, blue screens, and freezes after being open for less than a minute
then that isnt your psu thats the problem
don't look into the brand too
1060 systems can run fine off 400w units even. ive seen worse put on smaller psus
I don't know what else the problem could be. The system posts fine but the system will hang even when running the windows installer/repair media from a usb drive
The ram is good, I know for a fact. Pulled it straight out of another working machine. And the 5 2600x was new
The only thing I can think of it being is the PSU or the Mobo
How can I find out what psu I need for my pc?
i normally like to go 150-200w over estimated power usage, and refer to the psu tier list to see which one is over others
I see thanks for the help.
Should i prioritize psu for modularity or price?
Could someone help me with a good 700-750w psu for this build? https://pcpartpicker.com/user/Sonar129/saved/
multiple peoples opinions would be helpful for me
well first of all a 650w psu would be good for that build
a Tier B or even a Tier C psu would be ideal for that build according to the psu tier list pinned in this channel
@honest spindle do you care about modularity?
ehhhhhh
80 dollars
non modular
bronze
the one im going with is
$100
if you can spare that itll be much better
any warranty on it?
yea, is it gonna blow up lol
send the rest of ur buildf fredd
uhhh i actually dont know my build yet (cuz im getteng some stuff from my uncle), but i was gonna go with something like this https://pcpartpicker.com/list/8yKL4d
i am getting a free i7 - 4770 tho
Sorry @snow spoke, no it's not essential
and I figure going 80plus gold for 750W would be good for future upgrades
also what pin
there aren't any pins on this channel
hmmm
it should also be pinned in #building-and-recc-chat
well a good psu with a nice warranty is the 750w phanteks amp
are there any comparable ones for under $200?
I was suggested that one before, but the price got jacked over the last week
how good is the Seasonic SSR-750PX?
if one finds it under $200?
what psu should I get if my estimated wattage is 384?
600w
can anyone please give me suggestions for a full tower rgb fane case at an affordable price? (or just a solid full tower that I could add my own rgb fans to)
fan*
mainly anything under $200
that case is so overused
p500a comes with 3x140mm rgb intake fans, you can also add a 3 pack of sk140 to have 6 of the same fan
or you can get p400a, which is just 3x120mm instead
4000d airflow and 220t airflow are not bad
The TD500 has so much space in it. I love it.
Td500 is inferior, this post was made by the meshify c gang
Wanted a Meshify but A: it was slightly more expensive and B: included RGB fans for memes
TD500 Mesh reigns supreme ^
TD 500 mesh is king
;-;
I love democracy
Yes TD500 mesh gang
i was thinking of diy braiding my psu but i needed to know if when you take it out and plug everything back in will it lose any data or factory reset the pc.
does anyone own the NR200?
the newegg power supply calculator says that my recommended psu wattage would be around 430w, and i have a 450w psu now, would i need to go for a higher wattage psu just to be safe?
and just for clarification, the 430w is with a 3060 ti, which i obviously dont have yet, but with my current gpu installed im only around 350w
i recommend getting 150-200w more of the system wattage requirements
ok thats what i was thinking
but is the power calculator only the requirements, or does it also factor in that ~200w buffer?
im not sure it adds the 200w to the requirements
what kinda system you trying to run?
yeah no i don't think it does
just did a quick list based on what you've got on the calculator and pcpp gave me 409w lmao
so a good 600-650w psu will do
i have a lian li lancool 2 and i dont know whether to mount my fans on the front on the outside of the grid or the inside, also im top mounting my rad so its not a problem
nvm
doesnt even matter im not front mounting my rad
as long as there is no obstriction i think i am good
Does anyone know if this PSU comes with an American cord? Picture's show European style.
https://www.newegg.com/be-quiet-straight-power-11-1000-watt-platinum-1000w/p/1HU-004H-000G4?Description=be Quiet! 1000w&cm_re=be_Quiet! 1000w-_-9SIA68VB034183-_-Product&quicklink=true
https://pcpartpicker.com/list/ZDPQGq Anyone have any psu recommendations for this build?
possibly
For a PSU, I recommend anything from Corsair, Seasonic, or EVGA with an 80+ Gold Certification. I personally would go with a 650w PSU but you can probably go down to 500w safely
if not what else is there
I have a Corsair RM 750
is 850 the safe option or do you think i could do a 750
they're both safe
if you plan to upgrade to something like an RTX 3080 in the future, you would probably wanna go 850, but 750 is good if you don't plan to do that big of an upgrade.
true
any 750w recommendations?
ok thank you
Check this out on @Newegg: Cooler Master Master Watt 650W Semi-Fanless Silencio Fan, Semi-Modular 80 PLUS Bronze Power Supply https://www.newegg.com/cooler-master-masterwatt-series-mpx-6501-amaab-us-650w/p/N82E16817171113?Item=N82E16817171113&Source=socialshare&cm_mmc=snc-social-_-sr-_-17-171-113-_-12042020
Is this good, sorry about the link
Can someone make me a 2k part list
Is 79$ a good value for a 650W bronze?
I would say so
does it matter if some of the parts are totally sold out all the time
because thats like half of the cpus and 75% of the gpus
good deal?
I don't know much about Superflower or the Leadex III model, but I know superflower produces the OEM models for some pretty reputable models from other companies
just don't see too many superflower psu's in build guides or reviews
Did I do reasonably well with cable management?
This whole damn case is pog
looking at the number of zipties you used? its mediocre
I'm an electrician. Zipties are gold where I work. When there's a shortage all hell breaks loose.
I was gonna bring some home from work but I forgot, only had what came with the case and PSU.
bruh you used too many
also i feel this
I manage cables as part of my job, but these are much larger and heavy.
lmao
the biggest i've used is 00awg with 200 degC rating
I think the two on the left of that pic are 3 conductor 500kcmil
2 zipties
@surreal magnet show setup when
Oi, what a good case for a 3970x with a Zenith II (eATX) and an 360mm AIO
DM me with answer pls
Reason: Bad word usage
@paper osprey @mellow timber Ya'll mind if I just screenshot that old build and that reaction image and post it over the internet? That's actually really funny. No worries I'll hide names.
Do it
Okay sweet, cuz I already did :P
lol
You did a good job with the case you had though
And your new pc looks really good
(The build before that had an SSD hanging via power and SATA cable)
Thoughts on the lancool ii?
mesh = yes
Is a 500watt psu enough to power a 2080ti? Possibly a 3070?
you have to power your whole system, not just the GPU
I think 2080 ti alone draws ~280 ish?
if you're using a ~100 watt cpu, you're close to 400, with a little extra junk thrown in
you probably have 5-10W in ram
overclocking would raise these numbers
._. Here I am with a 750 watt psu
i also have a 750w
does the nzxt h510 have good enough airflow for a 3070/5600x build?
or should i go for a more open case?
i hate the h510
the h510 murdered my family
corsair 275r airflow or 4000d airflow based case
ah i see
i was looking at it since it suits the kind of setup i want aesthetically, but people have said the airflow isn't good enough
mhm
but man this is also super nice lookin
https://www.corsair.com/us/en/Categories/Products/Cases/Mid-Tower-ATX-Cases/275R-Airflow-Tempered-Glass-Mid-Tower-Gaming-Case/p/CC-9011182-WW
The CORSAIR 275R Airflow is a mid-tower ATX case that pairs modern design with maximum airflow, thanks to a slatted front panel and a single tempered glass window.
ah right
Is 650w enough for 3060ti and ryzen 3 3300x? and can I overclock a little bit with it or it would be dangerous?
It's enough, yet just to be on the safe side a 750w would make you feel stress free of any power worries! : )
Oh okay, I guess I'll stick to it for now since it's the combo of the newegg thig
@brittle charm Yes itâs enough
Donât go crazy with overclocking and youâll be fine
Alright, as of now i'm still learning overclocking so I'll be careful with it
For graphics cards itâs pretty easy actually
You can just use msi afterburner or some other software
For ryzen, donât bother overclocking
why not
I doubt you'll pull over 550w with that even while OCed lel
Yes?
you asked where you could get a lian li 215
all you have to do is google lian li 215 ÂŻ_(ă)_/ÂŻ
so I've got a CX750M psu that's been serving me pretty well for the past 8 months but with the latest launch of gpus I'm not sure it will be enough for when I can get my hands on a 3080/6800xt should I start looking for a 750w or 800w 80+ gold unit or keep the current 80+ bronze psu?
Nope. You should be fine. Also remember that 80+ does not equal quality. There are some 80+ gold units that are worse than other 80+ bronze units. Just depends on model
@shrewd pulsar
Thanks Yams, I was worried my psu would be too mortal for an ampere gpu
CX is a pretty good PSU. CXM isnât as good but itâs still ok
Oh wait @shrewd pulsar
CXM isnât that great
CX is
So if you can might wanna upgrade just in case
Thatâs mb
ah, gotcha, I thought the only difference between the two was one was modular, thanks for the warning.
I'll definitely be looking for an upgrade then, maybe an RM unit
RM would be nice
thanks for your help mate, I'm new to most of this so I appreciate it
CX F is an option now too
Usually quite spendy though
Phanteks Evolve Shift 2 or NR200? O O
nr200 imo
My whole computer just randomly restarts right around 620 watts. my PSU is a hx1200i. Anyone know why it does this? Could it be a stability issue? or just a bad PSU. @ me
where are you in the process @umbral monolith ?
@umbral monolith im sure any of us wiill
Hey everyone, doing a sleeper build and the only modification I need to make to the old ibm case is a 92 mm fan on the back. Is this something I'll have to do myself or do any of you be know of a place I can take it?
you just need to install a 92mm fan on the back?
it's an old case
jus diy it if you can, if not, then take it to like an auto repair shop, my friend did that when he was trying to set up a microwave build and they gladly did it for him, i don't remember at what price though
I7 9700f/5700 xt. Is 600 watts enough
check the true wattage on the side of the PSU
on mine it says "max output power" is 840W and the total power is 850W.. some are drastically different, its important to check
Oh
so only a true 600w would be good
Buy a 750 and call it a day
Otherwise youâre setting yourself up to buy another psu later
is the nzxt H510 really as bad as people say? since so many people still use the case is the airflow problem bad enough to not get it for the aesthetics?
people use case for aesthetics and because most new builders are like "whats an airflow"
Yo guys, I need your opinion on this, in my country phanteks p400a is priced at 88$ while Lian Li lancool 215x is at 114, which one do you think should I go for?
Lian li has 2 extra fans but is it really worth the 114$?
so ima say thwt rgb would fall into the case category, so whats the differance between 12v 4 pin and 5v 3 pin
whats the best 150$ case
Anyone have any good recommendations for compact, but affordable, ITX cases?
what does this mean
"Note: The Gigabyte Z490 AORUS ULTRA ATX LGA1200 Motherboard has an additional 4-pin ATX power connector but the Thermaltake Toughpower GF1 PE 750 W 80+ Gold Certified Fully Modular ATX Power Supply does not. This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it."
nvm fixed it. but what's up with there being hardly any PSUs with additional 4-pin ATX connectors
@wispy raven node304?
will that fit a 3070 or 3060ti?
as long as the cards are only 2 slots wide? aye
advantage of the node304 is that it uses normal atx psu's
and its very simple to work in
@rugged yew chances are you wonât even need to connect that additional 4 pin anyways
Ok I've been tinkering around in a new build with a half xb evo and this thing is a joy to build in. Just wanted to share my love. I can reach everything and anything from so many angles
May I see a pic?
best 650w 80+ gold psu brand??
So im a little unsure of the difference between ATX and ATX12v PSU's. I have heard that ATX12v will work with a ATX motherboard? or do i have to use ATX for ATX boards?
Mother board is Gigabyte Aorus X570 (ATX)
Case Coolermaster H500 (ATX)
First build, thanks in advance
@simple zephyr as i told in a dm, its not brand, its model that matters.
đ
IF you want to settle for a mediocre model, then by all means, its your choice :)
https://linustechtips.com/main/topic/1116640-psu-tier-list-40/ <- have a look there
PSU Tier List 4.0 rev. 14.6 Last Update: 29-11-2020 Gray - EoL / obsolete. Generally not recommended for purchase since its going to be pre-owned, refurbished or old stock. Green - small form-factor (gold and blue colors are disregarded due to scarcity of SFX PSUs) Gold - best units in the tier (...
ATX12Vo is not widespread at all at the moment, and i don't know of any current chipset MBs that make use of it.
I have the same case BTW. its sweet
Anyone have the Meshify C mid tower case? Wondering if 120mm fans will fit under the front cover as opposed to taking up real estate inside the case.
I have used the define C and it is the same frame
uuh I dont get what you are talking about @timber dawn
Let me see if I can find a pic
Ugh. Cant post a link for a damn pc case đ¤Ł
So when you look at the images for the Fractal Meshify C it shows that the front mesh panel can be removed. It then shows fans mounted to the front. Can those fans be mounted in between the mesh and the front of the case instead?
IE: so that they are not taking up room in the case if a radiator was mounted.
Hopefully that is a better explanation. I attempted to link a picture from newegg but it wouldn't allow that even.
Sorry for the mess I'm still benchmarking/testing in the living room
fellow pixel user
Of course
Yeah I was curious if that fan there could be mounted forward more than it currently is. It's hard to tell if there is room from the pic.
Currently planning to run a 3080 ftw3 if I can get my hands on one. And a 360mm AIO... So it may be pretty tight
also @indigo galleon apparently linus tech tips did a "stuff well rated at newegg" build and was suprised to see this case but it grew on him (see it open here) https://youtu.be/mODI4-cRhPE?t=616 both sides and top come off and the motherboard is on a shelf with the bottom half for cables/drives/psu/etc. and the front cover comes off for fan replacement/more cable routing. add in hotswap bays, and tons of airflow, and i love it.
and it fits 6case fans (200, 140x2, 120, 80x2), or swap out for radiators as you want
Wont load
then check out linus's video
I've turned all my RGB internals off and gotten all black components because i'm no fun
Yes
i prefer sleek and clean performance
blackout gang
đ
Its also way easier to build with no rgb
so many less cables
i also hooked all my fans up to pwm and the psu is one thats silent at low loads so i can't tell its on when i'm not playing a game unless i look at the power button
Yea
I'm really happy with the upgrade i went all top notch RGB in like 2013 but have been slowly left behind, slow enough i didn't really notice going from ultra settings to high to medium
just got the meshify c recently and i was curious about this as well, definitely cannot, there isnt enough space
im having the same issue with my graphics card being a little bit of a tight fit
althought, you might be able to get the S2
which is basically the C, just better
and longer
Thank you for the info. What card are you running and using a radiator?
im gonna get the 3070 eagle, and no rad
it will fit
just might look a bit odd with it so close
if i remember corretly, i will be about 4 cm
I have a xps 630i case currently. But I wanted to down size from that behemoth.
yea, meshify S2 might not be what you want then if you want to size down
the p400a or td500 mesh are both still options if you want a bit more room
i just really like the meshify for the tinted pane
The xps case is huge, and ive had to get creative when I did my mods to it.
wow... that is wuite large indeed
oddly common case to mod tho
thats what like, 80% of the pics im seeing when i look up the case
Yeah, I think it was an 08 dell style case. I gutted it and built a hazwell system in 12.
It is a tank though, it survived being thrown off my desk in the 18 Alaska quake.
Yo guys, I need your opinion on this, in my country phanteks p400a is priced at 88$ while Lian Li lancool 215x is at 114, which one do you think should I go for?
Lian li has 2 extra fans but is it really worth the 114$?
That P500A doesn't look half bad, I'll have to do some dimensions on it when I get off work.
hey, i'm thinking about getting a 3060 ti sometime soon, I got a thermaltake 600W gold PSU, do you think that could work?
with what cpu?
Do you do any overclocking
does anyone know why the corsair 275r airflow was 54 bucks and now its 90
corsair makes expensive stuff
Thermaltake PS-TTP-0600NNFAGU-1 600W ATX12 is this any good?
@scenic lance is the Thermaltake PS-TTP-0600NNFAGU-1 600W ATX12 any good?
Idk
alright the gf's looking for a PSU for a low-range build, about 500 USD total price
any suggestions in the 400 watt range?
any case suggestions for ~$100 USD?
alright thanks for the suggestions, ill look into them
@faint solstice here are some I have worked with that are also great:
corsair 4000d airflow is very capable and is REALLY cool if you appreciate attention to detail.
the Be Quiet pure bace 500dx is a bit of an aquaired taste but it is popular and preforms well with that sweet RGB
and finally the Gigabyte case has a cool astetic and is inexpensive
CM H500 goes below 100$ on sales
its about 100 now, but its not my favorite
It does outperform 500dx
true
actually I got it confused with that older one that GN Steve hated for a sec there, really confusing naming scheme.
Meh, I actually like the naming scheme, it's NZXT that I hate for having a H500
thanks for answering, now i have even more options to look into haha
we got u fam
H500 blank for the cheaper more barebones good option, H500m for expensive good mesh option, all improvements on the H500p
@elfin trout a good case under 100?
scroll up
Scroll up
Scroll up
Scroll up
Scroll up
yo scroll somewhere
do thy scrolling
the scroll up function on your mouse or the up arrows on your keyboard
haha i was the first
Anyone seen some reasonably priced psus for a 10850k 3070 build

Well, I meant like A tier stuff and a specific unit lol. My usual ones are either oos or high priced rn
Ok, thanks for the input đ
anyone know a good 400-500w psu that won't turn my gf's pc into french toast
that is a lot of money tho
and corsair isnt modular
the EVGA is a happy balance of those I would say
uuh...
Thermaltake Shart đ
@drifting sonnet for 500wat 70$ is kinda the lowest you can go non used or bomb
this looks good to me'
thermaltake has really uped their game recently
do you have a PCPP list from your wife's PC?
should be able to get one, gimme a sec
neither of us know a whole lot so it's probably not the best build in the world 
ye, ty; still waiting for her to get a parts list together :P
ok, cool. I am available a lot
hey guys, i bought an nzxt case that came with the rgb controller. is it possible to use that for other branded products?
i wanted to get these corsair fans but i did not know if they would be compatible
I have also used the hue, but it depends what connector the fans use
there are different kinds
ah i see
worst case scneraio is just to plug them into an addressable rgb fan header on the motherboard?
yes, make use you have everything you need in advance.
@drifting sonnet @edgy tiger smart white is trash, easy PC killer
Cheap PSU: EVGA B-Stock, get the 500BR
should be about $30 or so
wait really? was not seeing that
Smart is a slightly weird one. Failure rate isnt bad, problem comes to be what happens on a failure. Lot of the time it kills at least something else in the PC
Also is group regulated, so getting close to 500w load mark then instability issues like to happen
does the smart overload a rail?
on death - seems so, higher wattage smart whites it can also catch fire
this low wattage model doesnt seem to do it as much at least
phew, I bought a smart gold for a very expensive system
got me scared for a sec there
you know which one?
probably not horrible, most likely just meh. cant recall off the top of my head of any terrible Smart Golds, which is good
I have used the Smart gold 750watt and the Toughpower 850 GF1 gold
(Have used more- those just the TT ones i have used)
Those ones should be decent. Mind you, rarely see them worth the price
Quick question, will a Intel form factor PSU work with an AMD chipset?
I bought a 3060Ti bundle and didn't realize the PSU was labeled Intel form factor and wanna know if I should just get rid of it or not
are sleeved cables worth it
if you care about looks
a sleeved cable doesnt provide anything more than a regular one, its just the transfer of electricity
Never heard of a cpu brand specific psu before but thats probably just marketing garbage. You should be fine
Looking to upgrade my NZXT H510i case to something that fits a ATX Mobo better. Looking for something that has RGB in it.
Iâve heard bad things and good things about apevia. Should I not bother?
how much you willing to spend?
Ok thank you
$100-150
you looking for a specific color?
Black or dark.
well in that case, some cases I really like are the p400a digital, td500 mesh, 220t rgb airflow, 4000x rgb, the lancool II-x, and the lancool II mesh
Hello. Is the Corsair SF750 compatible with the RTX 3080?
yes
@sweet tangle generally, yes but if you do not have a very standard system no
Anyone have recommendations for mid cases with good frontal cooling and tempered glass or acrylic side paneling around $70?
So my front panel connectors canât reach jfp1 when using the cable channels in the case. Can I put it in jusb1 or do I have to make it ugly so the wires can reach?
@distant galleon phanteks p400
ok @distant galleon I ahve reccomendations
the fractal focus G is solid, but it looks kinda old
the cougar mx330 is solid, and the phanteks p300a mesh
@distant galleon mx330-g air, 55$+shipping, 3 fans, mesh front panel.
Would you guys prefer phanteks p400a or fractal design meshify C?
both are around 70$
i dun goof, my 3060ti with 3 fans won't fit, and i don't want to remove the dvd's case by cutting it, so time for an overprice case preferably with rgb fans
personally, i prefer the meshify c
Would it fit an rtx 3060 ti? specifically gigabyte gaming oc
And on a sidenote, how do I make sure that my components fit in the case?
so.. you want the meshify c ? tempered glass or normal ?
@scenic lance tempered
@scenic lance oh btw I am actually deciding on lancool 215 or this one, however, in my country, the lancool 215 is 113$ not the 70$
However fractal meshify c is still 70$
Not really a fan of rgb, more of an airflow guy, but which one do you prefer?
70$ meshify C or 113$ lancool 215?
215x to be specific
to be completely honest i would just go for the cheaper one
meshify c has great airflow
so nothing to worry about to be honest
to answer your initial question
Meshify C site says :
and this is the 3060 ti's size
L=282 W=117 H=41 mm
from gigabyte site
Oh oaky thanks
so you should be fine đ
Appreciate your help bro
you just need to check dimensions / compatibility on both the case (https://www.fractal-design.com/products/cases/meshify/meshify-c-tempered-glass/black/) website and the component's website
there
and no problem good luck ;D
Thanks bro, appreciate your help, now all I need are the cpu fan(which might be cooler master 212 since i just want a decent one and arctic p12 fans)
@scenic lance Oh sorry forgot to ask, in the worst case scenario that I might be unable to buy it, do you think the lancool 215 is an ideal case as well? that one is in my country so it's easier to get, however the fractal is cheaper(but there is the risk of getting it cracked while shipping)
@brittle charm from what ive seen both cases are very good options, it just comes down on what your willing to spend and personal preference
Ohh okay
agreed Lancool 215 is nice too đŽ
Alright thanks again guys
đ
even though i refuse to believe that it can fit a 360mm aio cooler into the fractal design meshify C
fractal site says it fits up to 360mm tho đŽ
true just doesnt look like it can XD
yeah right 
you can
the front of the psu shroud has like a thingy you can remove or slide back
and down there is where you can fit the radiator
what is a good case for a 2060 and a 7 2700x that is micro mid tower
i really like the masterbox mb311L for that category of cases
and it has two argb fans if you're into that
Any news on restock of phantek p500a? Iâve got it on back order
Question I'm going to buy a 3070 when they come back in stock and I have a 650w psu with a 4ghz overclocked 3700x should I get a 750 or an 850 psu
If the PSU is high enough quality maybe but you are living on the edge a little
That would work just fine
Guys I got a question, which one do you prefer? Fractal meshify C or Phanteks P400a?
Fractal meshify C
Meshify C đ
Fractal meshify C
Meshify c, but I like the p500a better
Alright imma go get the meshify c now, any tips on what else to get along with it?
For all other parts @brittle charm?
what the price range? And what do u want the pc for.
I meant like necessary/recommended add ons along with the case
Like cables, extensions, some stuffs
I am on a 1000$ budget as of now
but I figured I can stretch it to 1100
Oh okay, thanks man
yea
I heard all of these "fan extenders" or "fan hubs" or "usb cables" and I have no idea what those are
Everything required to boot comes with the parts that are required to complete the build In the first place. U do need a 8 gig (at least) flash drive to install windows ISO media into
Thatâs the only extra thing u need thoubj
Oh yup I got that covered already, I was just worried with all of the other cables other people were talking about
U can buy a fan hub if youâre motherboard doesnât have the sufficient amount of fan headers for the amount of fans u have. Most 5 packs of cheap fans on Amazon come with their own hub. But otherwise u have to find out what headers they require and u can buy a hub for fans u already have
All cables required for the build come with the psu or are installed in the case already, cause they are the power switch connector etc for the case buttons
Oh okay, I'll look into that, thanks
Really love the way the nzxt h510 looks, but I couldnât strangle my pc in good conscious :/. Tempted to go with the p500a instead and get like 6 coolermaster masterfans. Thoughts?
pardon me, but --STUPID HUMAN QUESTION: I have one of those new Alienware Aurora's-- the one that's small with a lot of notebook-size drives. I've been having on hell of a tough time trying to get a replacement part.
Alienware have offered to send me one free, but THEY don't know the part number, and sent me the wrong cable. (all their customer service is off-shore and CONFUSED) Iâd be happy to BUY the thing, if I only knew exactly which part number.
What I need is the combination cable assembly that plugs into the power supply (a big, white 6-pin plug) in the middle of the assembly there are double SATA ports attached (I guess so you can add powered items) and at the far end, a mini SATA-like plug that provides power to the burner, (A SMALL, notebook-size BDXL) --that's the smaller of the 2 contacts on the burner. It's all one cable ASSEMBLY, so I assume this is Alienware/Dell "proprietary". A repairman who offered to help was unable to find a replacement. Has anybody out there opened one of these and know what the @#!% this is? đ
@languid owl mind calling i will help
Ahh, a mind--if I had one of those I wouldn't be in so much trouble! (THANKS)
i will help you
personal or server
personal-- mostly my disc-burning fun PC...so losing burner power is tears-inducing..
it looks like it should be "standard equipment" but a PC parts store here was equally confused...
check dm
DM? --(I told you i was stoopid)
Where did it come from?
I mean it has vga, (video graphics array) but I canât see the connector on the right
Well, it says vga at least. To me, it doesnât look like a standard connector either
is there a difference between the corsair RM and RMx series psu?
RMx has a little better capacitors
so in all the RMx is better? @chrome iris
yes
ok thank you
also RM only has a 5 year warranty iirc
@chrome iris you certain that is not RMx?
says on corsair's website its 10 year
are you looking at the right rm
cause theres different versions
this one is 10 year
i think this one is 5
aye, and do you see a clarification in his original question?
no i do not
:)
but the longer warranty is newer, and i rarely see the old 5yr warranty version for sale new -- at least not at insane prices
neither of which are clarified points of his question :)
so i just assumed
aye :)
so if i had a choice should i get a 10 year warranty RM or get a RMx? RMx seems cheaper for right now
if RMx is cheaper get that
itâs not about the brand as much as itâs about the model of psu
Has anyone customized their case for a sports team or anything? I want to do something cool with mine for my favorite NFL team, I'm just not sure what. I was hoping to get some ideas on how to style it.
@frozen valley what case?
@edgy tiger I got the MSI Gungnir 100
@edgy tiger Thanks anyway. I was mostly looking for ideas for the glass. The box for this advertises 3D printing customization, but I haven't seen much with that, besides a few Youtubers who had some personalized mods done.
whats the cheapest psu that can run a 3070
@spare owl what other components are in ur build
can someone help me , iâm searching for a psu, mi pc has 5600X and 3060TI i donât know is choosing semi or fully modular and what psu to choose
depends on budget
yeah
I like fully modular for cleanliness.
But you realistically don't need more than 650W for that setup.
true
I generally stan Seasonic, Corsair and EVGA
the most i can spend is 110$
yeah, it has all you need and then expansion for anything extra
okkk
This is a 550 Gold - More efficient than the 650W Bronze - https://www.newegg.com/corsair-rmx-series-rm550x-cp-9020177-na-550w/p/N82E16817139231
eeh- I would rather have more watts if possible
I have been burned too many times before
I mean yeah looks good-but a little much
You said more wattage and its in your budget.
true I guess...
thank you for the help guys đđ
but I do like that 650 watt value
This is the 650W Corsair - https://www.newegg.com/corsair-cx650f-rgb-cp-9020217-na-650w/p/N82E16817139263
RMx is better quality than CXf btw
does anyone know a good $80 atx Case
so I have an rtx 3080, ryzen 7 5800x, m.2 ssd and a lot of rgb, how much power do you think I will need?
750w is recommended
i would recommend 750w corsair or evga
Okay thanks
any good atx mid or full tower cases with a glass that you can swing open?
hey um my case is missing 5 of the 9 stand offs for my new MB is there a place i can go to buy new ones or should i be okay with just installing 4 of them
Upgrading from my 3700x/2080 to a 5900x/3090 FTW3 Ultra. Should I go for a 1000W PSU or 1200W PSU?
Any objection to using a mwe gold for a 10850k 3070 build? It should be fine right?
@golden kestrel what is the MWE wattage
750w, ik the wattage is sufficient but I was more curious if there was a better build quality option for the same price
I mean, you can do better
But for 119?
650w of those models run around there. Ig thats enough anyway, I doubt there will be upgrades to this system any time soon
For 119 you can definitely do better
D f might be my best bet then
Is the Phanteks Eclipse P300A Mesh ATX Mid Tower Case a good case for its price?
@hazy copper thats a definite yes from me
alright thanks
i need help
need find a Power Supply thats works in a GIGABYTE B450 AORUS M AM4 AMD B450 SATA 6Gb/s Micro ATX AMD Motherboard around 50 dollars 600-750 watts
50 bucks
at 50 bucks the thing that comes to mind is the 650 corsair cv @rigid patrol , im sure that there's more
CV isn't very good though
it's not really great, but eh, i would invest more in the psu
get CX at least if you're going for corsair
CX 2017
for lower price range psus
but CX definitely doesn't fit in your budget đ
lemme check if there's some other good options
i can't find any for $50, can you ?
let me know too
CV really isn't worth going for though đ§
thats why im checking if there's others
yup
another option is the s12III
?
i wouldn't
S12III is meh too
you shouldn't really go cheap on PSUs tbh
especially if you want higher wattage @rigid patrol
yes, save some more money on the psu
i can not
oh and btw, what kinda system were you thinking of putting this in?
3060ti and ryzen 3600
are you buying new?
yeah, i would go for 600
?
which is problematic if your budget for psu is 50
like are you buying all your parts in the future or do you already have some of them
around 920-950
okok
lemme check, i think someone once made me a budget list at that price point
https://pcpartpicker.com/list/YXWqBc @rigid patrol i had to cheap out on the ram to fit your needs, but for 20 bucks more you can get crucial's 2x8 3600cl16 kit
and that motherboard goes up and down in pricing, sometimes it ranges from the low 80 and sometimes the high 120's
ok
the b550m phantom gaming 4 is also a great option
i have the full atx version and have had no issues with it so far
but maybe there are better options
lemme check it
the b55m pro4 offers more features, like more fan headers, supports for faster ram out of the box, more usb headers, and it's got a better looking io, not to mention that it can support 5000 series if you're planning on upgrading in the future, the b540 aorus m looks nice if you plan on staying where you are
Yeah a lot of people don't account for fan numbers and sizes vs headers
You can always use a splitter or hub, but if you have 2 headers and 3 different size fans, one of the fans will not be indivually controllable
Where as if you split a header between like 2 input 140s, you'll want them to be at the same speed so splitting is fine
pls recommend sfx psu for 5900x and 3080
Does anybody know if these two are the same in terms of design? I know they offer different types of cables but can't tell if that's the only difference.
https://www.newegg.com/p/1W7-00AB-00026?Item=9SIAJ00CGA0159&quicklink=true
https://www.newegg.com/p/1W7-00AB-00006?Item=9SIAJ00B7W8910&quicklink=true
the bottom is 24 pin + 8 pin + 2x 6 pin + 2x 8 pin
the top is 24 pin + 8 pin + 3x 6+2 pin
the 6+2 can act as a 6 pin or 8 pin, whichever you need
@spring haven
Thanks @chrome iris, besides the different pins, I can't tell if they are the same in terms of cable material and design
what kinda system you got
Yes probably
U could get by with a 650
so any case can pair with any mobo right?
not really
for appropriate form factors yes
but you can't put an atx MB in a case that only fits an Mini-ITX mb
true
Also your components may be too tall for some cases or too long for others
Even if the mobo fits
what is the on and off button on the psu. Those symbols with the i and o
So my power supply is coming up to 7 years now and im curious if i should replace it or not
my power supply is a corsair hx750i 750w 80 plus platinum
@worthy crypt if the "I" and "O" are together then its toggled power switch but if the "I" and "O" are separate then the "I" is power ON and the "O" is power OFF
@jade haven well, for occasional gaming 8-9 years is the recommended replace time, but you have a durable PSU. I have a PC running a 12 yr old 850 antec unit and it still works as good as ever so pick your battles.
possibly @rigid patrol , it DOES look like a great wall manufactured unit
(corsair also uses them), but i would recommend using a more well known brand
ok
anyone else ?
Though I really enjoy building PCs, I really like how the Alienware pre-built's have PSU's on a rotating hinge. Does anyone know of any cases that feature that?
Its kind of a weird thing to want @rigid patrol
It blocks any sort of tempered glass window- there are better ways to hide a PSU like in the o11
I dont rlly think any cases have that to build in
?
id go for more well known brands
its a weird kind of thing that allows alienware to make the entire pc smaller
i dont think any other case manufacturer does that
@cosmic wind Why do you like that feature? Is there a particular reason? Accessibility? Just getting it out of the way? Case Size?
Often Dell/HP/etc will use custom sized hardware to fit in a tiny size like @oak nimbus mentioned. If you are looking to use standard components, you'll likely have to go with a different kind of layout to get the same effect. If you're looking for small, take a look at some of the funky designs in ITX from Lian-Li, Fractal, Shuttle, Etc. and maybe you'll see something that has that same effect for you.
@cosmic wind the only case you would get that same functionality would be Dell or Alienware cases but you won't be able to find any hardware that would fit the case because most of the stuff they use are custom built for the cases themselves. Dell and Alienware don't exactly build their PCs for modularity unlike other builders like HP Omen with their modular case designs and components and iBuyPower and CyberPower.
??? what does vte mean
Its the name cougar gave to their psus
evga bq is good
semi modular, bronze or silver
I would go for more well known brands
shady
I agree with this, there are cheap modular ones on evga bstock
noo
I mean
sure
but like
bstock?
why
it's not the point where u need to pay < than 30$ for a psu
get a new evga psu
The supernovas are cheaper than msrp and does the job the same
model over brand
Youre better off getting a bronze rated one than a gold rated one thats non-modular
Dont get gold just because it says gold
https://www.newegg.com/evga-600-br-100-br-0600-k1-600w/p/N82E16817438146?Description=evga br&cm_re=evga_br-_-17-438-146-_-Product&quicklink=true here's a br which is decent enough
@vocal tartan ty
I thought the Seasonic 12 were the really bad Seasonic ones
they are
Dafuq this guy talking bout then
?
you a have choice ?
How good in ur opinion is the Inwin A1 plus itx
@tender rapids you had a look at Fractal Design?
https://www.fractal-design.com/products/cases/meshify/meshify-c-mini-dark-tempered-glass/black/ <- that one came to mind
or the Define C Mini
i personally really like their stuff (Fractal Design) because its a fairly "timeless" design language (on the define and the node series)
there is the Define version
do note there are different version of it
let me just look at the numbers, 2sec
37 of the machines last month was FD builds
that is out of 183 builds
aye aye :)
always open for actual questions :)
oki :)
they are all lovely to build in, so yeah :)
the mini or the others are not "compact" variants for the intended board size
the q300l is also a very ... weird design
the "concept/idea" behind it is interesting, but the execution/result that Cooler master deployed to the market ? not so much
aye
again, the modularity, which was the concept/idea was not thought through enough
Hi guys. A question.. how much wattage should i increase over my pc wattage needs?
usually 100-150
yeah, always a smart idea
unlike buying a Thermaltake Smart PSU
@chrome iris well I guess I have a reputation now
you have a thermaltake smart?
I recommended it a while back I think u were there
and yes I have used them
I also love the toughpower series
whats a good case for under 80 at like micro center
if i was there i surely would have roasted you for an hour straight. Thermaltake makes some good models dont get me wrong, but their smart series is trash
I got a corsair psu rm650x which is about 100W more than what i need so thats a relief. Thanks everyone đđť
a 5600x and 3060ti is ok with 650?
@south flame yes
Antec NeoECO Classic NE650C V2, 650W 80 PLUS Bronze Certified, Japanese Heavy-Duty Caps, 120 mm High-Quality Fan, Thermal Manager & 5-Year Warranty
Lian li o11d vs phanteks p600s vs phanteks enthoo pro 2 which one is better for a ryzen 9 5950x asus rog crosshair formula mobo with a rtx 3090?
are thermaltake smart power supplies good
thermaltake smart bad
anyone know a free shipping eligible psu?
011 dynamic is one of the best cases on the market, definitely the best of those options
for watercooling at least
011 dynamic is one of the best cases (by looks), if you have 9 fans
is the hx750 a good psu
but i bought it on like half price
Is a 600w 80+ White PSU enough for: a Ryzen 7 3700x, 2070 Super, no RGB.
650-700 is usually the safest to go with but you should read the spec list and see what those components need @earnest hound
Power Supplies come with all of the cables you need
anyone use mountain mods cases?
no, but looking it up it looks pretty expensive and big
it's one of the rare cases that allows for horizontal mobo
i currently use one and am curious if anyone else uses it. my choice in aeshethetics are bad though. i have a black case with a bunch of the brown noctua fans lol
Hey so I have a RX570, Ryzen 5 3600 and little to no LED and my PSU is a be quiet! System power 9 500W, and about two months ago I turned my computer off and it took about 4-5 mins before the fans and lights turned off and when they finally did turn off and I tried to start it up again it wouldnât boot passed the splash screen so I switched the PSU plug with a different socket and it worked again for another two weeks then the same thing happened, I am 99% sure it is my PSU but I just want to check with people who could have other information
anyone knows the difference between Thermaltake Toughpower GF1 and focus 850? besides the rgb, are they comparable? for 3080 and 5800x set up.
thanks
I have used the toughpower and liked it, but I would go seasonic
the TT psus have off-putting red PCI 6x connectors
ahh, seasonic is very popular but the wait time is killing me!!!!
hmm... do you like any other 850 watts? have had odd experiences with both
i want something that is around 150 dollars. dont wanna break the band....the build is arelady about 2500 before keyboard and monitors...
bank
i dont care about rgb or the look. just want something is not too expensive and reliable
thanks, i will look it up
idk i heard that some dont but i guess mine comes with it