#cpus-mobo-and-memory
1 messages · Page 97 of 1
i am not human 😦
@urban ferry captcha maybe?
discord is grabbing the the page meta tags
but newegg thinks discord crawler is not a real people
Hey guys if theres bent mobo pins and you put the CPU in the mobo and turn it on, will anything happen. Will CPU still work coz I found a PC with bent mobo pins
it wont work
I really really wouldn't recommend trying that
if you can bend the pins back though, it'd probably work
But would the CPU work
the system wont even attempt to power on
You said the mobo had bent pins
LOL
I took out the CPU and there was bent mobo pins
in a non-bent mobo, cpu might work
It needs all its connections though
Ok cheers mate
Can I use aura sync with gigabyte aorus pro X570
Or can I link aura sync and gigabyte rgb fusion
Depends the products that your are linking
With Corsair you can only use icue as far as I know. With gigabyte and asus MOST products that have the right connectors work with their software but not all of them do. You just have to do a little research.
Ok thanks
You’re welcome
@spiral fulcrum its a gigabyte product, therefore no ASUS aura sync
@oak sand what happens if I connect a aura sync rgb terminal
And is the same price I believe @spiral fulcrum
@oak sand i believe you are missing something there
Probably
look at the pricE
no no, look at the sentence you wrote up there
Oh.
:D
Speed?
capacity and cpu?
How was that 117
cause it is not sold and shipped by newegg
This is the cheapest 16gb kit but i don't know that company https://www.newegg.com/p/0RN-00A3-000N2?&quicklink=true
2133mhz is how fast?
slow
timetec is hynix so the quality is good anyway
hynix is only a concern if you have an HBM2 based GPU
read: vega variant
it overclocks poorly in that case
what is the “red cpu light” i see people talking about on b450 boards
Is asus prime b450 worth?
which specific variant @finite shuttle ?
wait theres better ram for certain cpus?
ye
fuq
lul
That’s pretty good.
3200 MHz ram is good for ryzen 2000 series 3600 MHz is good for ryzen 3000 series.
And them sometimes the timings matters
so no need to refund?
nope
No. And if all comes to fail you could always overclocking your ram. I have a team group kit that’s 2666 MHz but I have it run on 3000 MHz
Can I use F4-3600C16D-16GTZNC on MSI b450 tomahawk Max with ryzen 5 3600x ?
In gskill page couldn't find this mobo on qvl
Sure
Qvls are generic, if you see any ram on the qvl that runs 3600 cl16, then these ones will too
I mean, they can't test EVERY stick of ram in existence
Nice, that's realy tricky for the first built, which RAM to use, recomendations are different, still must find info if it has any problem, will calm down if won't find any isues with this RAMs on tomahawk Max 😊
Is OLOy ram good?
its okay
Hello guys
If we were to consider
Ryzen 5 3600 vs Ryzen 7 2700x which one will be better guys
Ryzen 7 has got 8 cores 16 threads and 4.3 GHz
But since it is 2nd generation does it make any difference
Or will it be better to go with a intel core i5 9600k processor
Help!
Depends on the use case
What do you plan to use this pc for
Just gaming or do you plan to stream or do editing etc
Gaming streaming as well as editing
Because @muted roost. This is going to be my first ever PC in my life
2700x definetly
Hmm okay
Ehcih one can I go for graphics
so those two options both have NVENC encoding which can be used for streaming
so maybe the 2700x isnt better...
Okay
the 3600 is better for gaming as it has better single core performance, and if you leave the streaming up to the GPU, then you can use the processor for gaming rather than gaming/streaming
Okay
1080p footage?
1080p
No no video editing onky
since its an AMD processor, you need an AMD board
Yup I knew
i would look for b450, x470, and x570 boards
b450 and x470 both need bios updates to work with the 3600, but most boards should be up to date by now
amd is better for price:performance right now
intel used to be better, but now they have to catch up lol
the 1660 super is comparable to my 1070 which can handle anything
2060 has rtx, but its not good for it.
Oh okay
But it has ray tracing know bro
And when I went to userbenchmsrk rtx was 13% better
Than gtx 1660 super
2060 cant handle RTX. It can, but like if youre fine at playing at 20fps 
thats what i would do
especially if its cheaper
Oh okay
that make sense?
yes
huh?
what does ryt mean
Right??
ah
well, geforce experience isnt necessary, but it is sorta nice
for driver updates
We should download it from the internet
im not sure exactly how it works, youd have to ask somebody else. All i know is that NVENC is good for streaming and takes the pressure off the CPU lol
NVENC is the encoder type. Using it only needs the drivers and some recording software (OBS, Streamlabs, Shadowplay, etc).
Experience isnt needed for that
hello everyone! thinking of starting a new build (first one in about 10 years haha) there are alot of mobo out there now and iv been researching, but was wondering if someone can point me in the right direction with some recommendations! thinking of using amd ryzen 2700x, if it makes a difference, and im personally building the case so can build to specs
depending on your budget i would go with the tomahawk
b450
also that pretty cool that you are building the case
i like how newegg has the same listing like 20 times from 100-400 for same picture haah
if you got a good one i would appreciate im looking at them now, to find a difference in all these prices lol
are you in the US?
i am
here it is on amazon
https://www.amazon.com/dp/B07F7W5KJS?tag=pcpapi-20&linkCode=ogi&th=1&psc=1
thank you kind sir!
i have used it a bit
well you can use that to get links to parts
like amazon and newegg links, and it shows you where it is cheapest
true, i was just struggling on picking mobo haha, i have ideas of the rest just mobo has too many options for my brain haha
ahh lol
Anyone have an idea where i can get a 9900k that has a few broken pins?
On the used market, even though I'm not sure people sell expensive CPUs that are 'broken'.
Yea im gonna try and repair it so i can get a 9900k for cheap since i dont have 600 dollars to drop on one
Imagine you fail to repair it...
Yea that would suck ive never done it before but would be willing to try
That’s right completely forgot. Too used to Ryzen :/
What the big difference between an i9 9900K and an i9 9900KS?
@hard badge KS is factory overclocked to 4 ghz I believe
Tom's Hardware Forum
i9-9900KS has been released!
It’s Intel’s best consumer CPU!
But how good is it compared to the i9-9900K?
Well, it’s anywhere between 1% to 8% depending on the application.
It’s definitely more power hungry.
The warranty is just 12 months, instead of 36!
View...
@main pulsar oh okay didnt realize that
Thanks!
should I sell my brand new ryzen 5 3600x for 200$?
or what is the average selling price
If someone is willing to buy it, get as close to the price you paid for it new
hey so bought a new hp pavillion high spec pc with a i7 7700 a gtx 1050 and 2400mhz ram but my ram is only running at 1200 mhz so im confused as to why
ddr is double data rate, so ddr4 1200mhz=2400mhz
i need help finding what kind of memory this pc uses
http://tech.firstpost.com/product/desktop-pcs/inspiron-one-2020-w240526in8-specification-328752.html
Dell Inspiron One 2020- W240526IN8 Specification, features, Price, Photos and Ratings on Tech2
Pin count, sodimm?, etc.
looks just like ddr3
it's an AIO, i'm pretty sure it uses sodimm but not totally certain
alright
@delicate bolt https://www.nehruplacemarket.com/price-list/desktop-price-list.html its sodimm
Desktop PC price list in Nehru Place Market Delhi for year 2019 - 2020 is published along with branded desktop computer price and assembled PC price in Nehru Place computer market India updated daily
alright
the model is W240526IN8 if u want it
y’all know if any of the following cpus are better than a 2600x and can fit into my budget
probably not
i mean, i cant even read any of those
but from the box art i can tell those prices are too low
yeah a 9900k isnt $250
@umbral valve there is no such thing
1440x900 panel
an employee store does not exist?
too blurry
no, not that you would be allowed to post anywhere at least
well my cousin sent them to me so
anyways my budget probably 700 probably can sneak into 800
too bad the ssds aren’t as cheap
thought they’d be half off as well
@gritty meadow oh were/are you an intel employee?
didn’t know i couldn’t send pics
lets just say i have worked closely enough with them
1600 AF FOR $85 IS BACK BOIS
why?
why exactly should any retailer gut their profits when there are people willing to pay the price?
trying to build a budget mATX build, is the B450M PRO4 a good mobo?
I'm pretty sure microcenter guts their profits to get people into their store. I dont think they offer that price online.
@coral owl a lot of people don’t like asrock software and it seems msi has the lead on b450 products
@coral owl budget?
🤷♂️
it doesnt have to be msi
this Blue. person said " it seems msi has the lead on b450 product"
There's one Asus b450 board ppl like to recommend for it's sound card
what does the sound card do?
Sound
hmm
@coral owl two options that're good
b450 Asus TUF Pro Gaming (not to be confused with Plus Gaming)
b450 Gigabyte Aorus Pro WiFi
Or buy any board and get a better sound card installed 😛
yeah. but why get a board that is meh at its price point when you can get more for your money? sound chip is just one of the many reasons as to why tomahawk isnt super amazing for its price. Things like amount of M2 slots, amount of PCIe slots, WiFi, ethernet controller, how many of 12v/5v RGB headers, and USB ports
Msi mpg z390 gaming edge ac atx motherboard anygood ?
Anyone have any tips on shipping a CPU? I don't have the plastic clam shell it comes with, nor the original box.
lga or pga?
do you have any antistatic bags?
wait
@spice relic srry i wasnt talking to you
mb
@main pulsar I'm not sure, I will have to check. Do you think putting it into an anti-static bag and then putting it in a padded envelope will be fine? 6700k no pins
Ok
yeah, thats totally fine
Awesome, thank you!
just bubble wrap it up and put it in a bubble mailer
boom
if it were pga, it would be a little more difficult tho
Yes and I'm glad it's not XD
uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
i disagree with that
oh wait nvm i misread
i thought you said put a mobo in static bag and in envelope
but yeah just wrap it well it should be fine
yeh
i was worried cause ive seen mail that should not be bent, forced bent to fit in my mailbox.
that clearly said "do not bend"
i bought a metal plaque thingy and it was bent in half ._.
https://pcpartpicker.com/list/dLZstp <- this is what actually ended up making most sense
which is one heck of a world away from the starting point
and reallly good job @main pulsar on finding that viewsonic
that is a silly good price for it
no availability and shipping made the cheapest board that fit the requirements an ITX one
very
and he ended up saying he wanted/liked the Fractal design style (in general)
he had settled on accepting the price for the define mini c
they make sleek cases
which is not a cheap case (125 aud)
and then the mainboard stuff happended, and node304 ended up the choice
and he is going to go out and try some mice/keyboards at local retailers to get an actual feel for them
good idea
and then order/price-check online
that is why there is a fairly hefty reserve for that
although i think he is going to end up using more than that
i would like to show you the abomination of a list he came back with today btw
oof, i hope its not the one i made for him
phew
oof
o wait, i think i saw that one
we had a "brief" 3 hour voice chat about it
well, chat
in that i talked, he listended
i hope it sticks
pcpartpicker doesnt have staff
@gritty meadow note: SN550 is DRAMless
not for that
i know @long geyser
it is going to be fine for him
availability is so bloody wonky over there
and shipping is insane
it IS a giant island
@long geyser but thank you for mentioning it :)
yeah, availability can be fun
is Australia a continent?
yes
huh
heck, consider this
the evga KO that is bouncing all over the place in price in the US?
yeah, that is the 3rd cheapest card over there
with about 15 retailers having plenty of stock
Hey y'all is this a good place to ask for help on deciding/choosing which motherboard to pick? I was redirected to the discord from the customer support chat
how much of a chance is there for ram to get damaged if i dropped them from ~1m while those were in their plastic packaging
it's been on my mind for a while, i was slightly worried
i would be worried a lot more if one of those dropped while not in packaging, and if they had hit the pins
yes
2.5 or m.2?
an m.2 ssd
okay, those are a bit more fragile
yes
so lets take a 2.5 ssd
IF the case if hard enough, you can use it as a hammer
i am not joking
even though i knew those are hard to damage in such a way, i was still concerned
the "be carefull" warnings/labels that are on things are there because people run around with their head in the attic and their feet in a different country
components in the consumer space are quite durable
and by quite, i mean, very
BUT, you have to remember, it is still mass production
"stuff" happens
sadly i will have to struggle a bit with the m.2 drive packaging
hm?
it's in place very well, but it's hard to get out
cut the top of it
yeah i know i could do that
its a clear double plastic case right?
no
which model is it?
that "looks" like a regular cardboard box with a antistatic bag?
so what are you actually worried about there?
true
im pretty sure i have to keep the packaging if i plan on reselling it a few years later
that is your choice.
yes
im also living in europe
then the box should not be a problem
still, if i would buy used hardware, i'd probably want to get it's box too, so im just going to keep it just in case
also, on the topic about being nervous about parts and packaging.
those are cpu trays
yes
intel cpu's are harder to damage because they have pads, not pins
that is the method for ALL vendors
i see
you get them like that, you store them like that
and you pray to whatever you believe in that whoever moves the pallet knows what they are doing
i'd be a lot more worried if that person handled hdd's roughly
actually, i would
hdd's that are not powered on are just fine, they can handle a LOT of punishment
the point of all this: Dont worry so much about the components, they are durable enough
you are very welcome :)
@oak sand haha well I'm pretty certain I'd like to get a Ryzen 5 2600 processor. I'm not sure what all I should be looking at as far as motherboards go. I guess there is a A320 or B450 that tend to pop up, but I'm not really sure which one to go with, or brand, or any of the specs or whatever.
@green swan what is your total budget?
for the motherboard, I'm thinking less then $150. Is that reasonable?
its plenty
but try and put forth a total budget for all the parts you want to get
if that is 600usd? fine. if it is 2000usd? fine.
but having a general idea about what you have available, will help us (people here) give you sensible advice
@unkempt tinsel i see you plotting?
So the Ryzen 5 2600 shows for $120 on newegg, I'm planning on getting the $60 ripjaws 288 pin 2x 8GB memory cards, and then the motherboard. I think that's all I need for right now.
@green swan do you need wifi?
IF you do, then the total will be about 15 usd higher than this.
but that is a suggestion for parts @green swan
@green swan the 2600x is 80 at microcenter
Will there be much difference between a "Micro" motherboard and a normal one? Is that just size?
for your outlined use? it is just a question of size
and that is the cheapest board that gets you okay things
OK cool, thanks! I think I can go from here. Thanks all, I appreciate the help!
you are very welcome
keep this in mind, if you show this to people that make a bunch of assumptions about what you are going to do with the machine, you will hear a lot a noise about the mainboard being wrong etc etc etc. I guarantee you, it is not. is if perfectly functional for you @green swan
and you are very welcome to send the people that might complain over here
i will, if nothing else, be entertaining.
Is it better for 2 8gb ddr4 memory sticks or 1 16 gb one
generally 2 * 8 in consumer stuff
hey guys
I wanna ask about RAMs, i want to know if it's worth to buy G.skill with timing 16-16-16-36 over one with 16-19-19-39? even if the gap between them is over 100$, and this is their links
https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232860
https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232861
they are the same as i saw when i compared them, the only diff is timing, and idk if spending 100$ for a bit better timing is gonna be worth it
im planning to use it on ryzen 3900x or 3950x
also, is it fine to use any other RAMs with 16-16-16-36 timing? if they are other cheaper options, or this RAMs from g.skill are giving the best performance for AMD?
its not worth it
at all
i dont think it matters what your doing with your system, tightening timings is for enthusiast bragging rights and minimal gains
I have a question.
Would it be easier to buy 3600 memory or overclock 3200?
depends on what die it is and how well its binned
Reasoning being not all 3200 ram can be overclocked to higher frequency
@naive pendant is one of the higher bins of b-die /ddr4 in general.
Stock XMP at 3200 14 14 14 34 is great as is, but those kits are very flexible to manual OC.
@main pulsar thank you
Should I go with the ryzen 3600 or 3700x?
Both are within budget
It's going to be primarily for gaming
@copper badge what is the tradeoff you are making elsewhere in that system?
because the 130 usd difference between those should enable other things. [Edit: -should]
Either with an AIO or an air cooler
question: have you asked anyone else about this build?
Yes
as in, has someone looked at this and gone : "yep! that looks fine!"?
How do you feel about paying for stuff you will never use?
?
that mainboard is silly levels of overpriced
I'm going with it for the PCIE 4.0
which you are going to use for what?
Eventually when the 30xxs come out
so, what other reason do you have?
Is there a sale on it
no
that is a x570 board
look at the price history of that board
it is the semi-expensive part of its price history
what else beyond pci-4, do you think you will use from that board on your list?
what are you talking about?
Ethernet ports
the Taichi board only has 1, 1gb port
Im also planning on OCing a bit
then your premise for asking about which cpu is wrong.
Boost up the CPU to 4 ghz
because you had not specced for at cooler at the start
70+usd is used on that
also 850w is overkill bump it down to 750w
anyone know why the g.skill lighting software will not dectect my ram
do yourself the favour and listen to someone else from who originally spec'ed that list of yours @copper badge
@gritty meadow Do you have time to help me understand something
@tacit hemlock i have time, i cannot guarantee that i can help, but ask away :)
Im sure you can help :p
So we talked like a week ago. I was telling you my plans to upgrade my motherboard and cpu to a ryzen based one
@lilac stream sadly, i have no experience with that software. so no help from my end on that.
@tacit hemlock go on :)
I don't fully understand the process on the software end because ive heard conflicting reports
I am going from an intel core i5 6400 and a prebuilt mobo so im sure that i can't just plug and play with the new components
nope, only thing that can potentially be used is GPU, Stoarge and ODD's
maybe case/psu. but quite unlikely
I recently did a case and psu swap in anticipation of this change so theyrre compatible now
ok
do you think that a different mobo would help i have a msi b350 tomahawk rn
I don't know what to do with my copy of windows, my data, and my drivers, nor do i know how to perform these changes
@lilac stream i honestly have no idea about it. none.
@tacit hemlock you got time to jump in a voice chat to talk it over? details are easier/quicker to explain then
think so lemme get my mic real quick
@tacit hemlock no rush, i will need 5-7 minutes before i am ready here.
aight im ready when u are take your time
@tacit hemlock just jump into General 1
k
whats a good mobo that would fit an i9 extreme
What budget?
under $300 about
for which i9 EE?
all i know it is a preproduction extreme
Budget bored for Ryzen 7 2700?
@gritty meadow hi again. So real quick I wanted to point this out. The asus tuf mATX board we decided on only supports memory up to 3200 mhz so there would be no point in getting the 3600mhz RIP jaw set right?
that is the old support page
that hasnt been updated
it will work. and as mentioned, that memory is so cheap (right now) that it does not make sense to go with anything but that 3600 memory @tacit hemlock
you are very welcome :) and please remember, there are no stupid questions, only silly answers :)
Sounds good
hello everyone. I have a question and I am new to Ryzen 5. I've noticed when i play certain games, my cpu memory went up to 12000MHz. all background programs are not running at all. so i am not really sure why. Does my game become slower with this cpu memory. Thank you in advance.
edit. sorry i said it wrong. my cpu clock when playing games is 4100mhz. and ram 12000mhz. are those numbers ok when playing games?
Ram isnt that fast @rocky thicket
Thats literally impossible for ram
But for the cpu, simplify it to ghz so it would be 4.1
Which is normal
12000 what the hecc
Right
you sure its not 1200?
Thats what thinkin
tho 1200 is VERY low for ram, unless you're on ddr3
but ryzen is on ddr4
I dont even think theres 1200mhz ddr4 ram
oh wait
He underclocked it
unless they have like 4x8 gb sticks of 3000mhz, and they're adding the mhz maybe?
Oh true
@oak sand I'm pretty sure 2133 is the lowest ddr4 goes, even if you try to underclock, I remember that as the lowest option you can set it to, at least in MSI bios
Yeah it is
So um apparently they sold out of the tuf motherboard last night and the ram went up in price so I guess I'll be waiting for a little bit now @gritty meadow
Could be 1200 actual clock, 2400 effective clock
could be that too, tho I wonder where they are getting the info from
like hwinfo? or like task manager?
What's better, 3200mhz at 16-18-18-36 timing or 3600mhz at 16-19-19-39
I would say 16-18-18-36 I think
3600 one
Is it really a big enough difference to notice?
depends on what you do and what your CPU is
So average FPS will be close to same but lows will be better. So basically less stuttering
For the 3600mhz?
yeah
Aight
Its 175 on amazon
What would cause a red light on my motherboard to randomly come on and play a 3 beep POST code on startup. Can still boot into windows perfectly fine without issues. No crashes or anything. Ran for hours on high settings gaming without issues. Tried different RAM, bios update,clearing CMOS, and a fresh install. MB is ASUS prime x470 pro.
Not sure about 3 beep but a 1 long 3 short beep could be an issue with gpu, like not enough power
@tacit hemlock is the TUF not listed as coming back in stock?
It doesnt mention it
hm
let me have a look around
will do
Is this it? Cuz if so they restocked😂
Ya they restocked it. It was 100% not in stock this morning
and yes, that is the board @tacit hemlock
Theres two of them this is the one that is on pcpartpicker
What's the difference
look at the names
the B450M-PRO Gaming is what you want
Alright then, that solves that. Once again you fix it😂
82 I think
still a bit cheaper than normal
Ya it's still a good bang for the buck
Wht ram is it
3600?
Ah yes
look at the price history
I have those
They say "intel xmp ready" and "intel supported" on the box
Idk if that means no amd but whatever
Lol
there is memory sticks that have both the intel version of that, and the amd verison
on the same package
the whole "supported" sticker stuff is imo bs.
because there is no manufacturer that would make a set of sticks for the consumer market that doesnt work with everything
I mean, some memory doesn't work with Ryzen. Tho that is rarely an issue
mainly a first gen issue, not a lot of ram worked with them. Second/third gen basically any kit will work
I'm looking at cable extensions on cablemod
What connector do I add that powers the CPU?
already answered by the asker in #graphics-cards
eps
budget?
there is nothing lower than 170
that is currently the onlyl one around
as in, in stock
I mean i could go a little higher if it gets some more performance
let me ask in a different way: What do you think you will gain with a x570 board?
pcie 4.0
and use it for what?
also i want a vertical gpu and what ive heard is that it wont work properly with a high bandwidth card and an b450
who told you that?
my uncle
your uncle does not know what he is talking about.
he might have said somehting different but im too stupid to know about it
and yea he does know what hes talking about
the statement you repeated above = false.
well I dont know how to explain it lol
there is no limit like what you are talking about
is there a filter system on newegg?
also by the time I build it the X6xx series would be out
@astral cobalt #overclocking <- please try and ask there :)
Reason: Bad word usage
nothing to curse about :)
sorry!
nothing to be sorry about either :)
i swear like a sailor
it will just make the people that are interested in OC'ing be more likely to answer you :)
ok, thank you
Hey I’ve been trying to find a mobo that could fit a dark rock pro 4 comfortably on the x570 chipset. Does anyone know which boards can fit this cooler?
I’ve tried using there compatibility checker but it gives me some odd warnings
Like the pro4 fits no problem but the smaller slim won’t.
afaik any mobo should fit it (maybe a few of the top top end ones like $500 motherboards don’t)
Without covering pci slots or ram slots?
Hmm ok thanks!
@naive pendant Whether you get b450 or x570 is eh for the bandwidth. There isnt any decent Gen4 compatible extenders for it as realistically any increased wiring length can get screwy with Gen4 You'd be best off with b450 as the default gen mode would be set to 3 and thus no annoying issues will occur with it. If you get x570 you have a very, very, high chance of needing to set it to gen3 manually in BIOS
Ffs
anyone bit of help wit ram nonsense and qvl
https://prnt.sc/r4b02m
screenshot has text in it
and this ddr4 DIMM DDR4 4GB 2400MHz Kingston HyperX Fury CL15, HX424C15FB3/4
U
p @long geyser ok yes that's what he was saying but I just didn't represent that correctly thank
its asrock b450m pro for 2400g @long geyser
kits have different part numbers
HX424C15FK4/64
HX424C15FB3/4
those numbers dont correspond to the kit size afaik. So basically cant say much. However you rarely have to care for QVLs now
will it break the motherboard
again, it's very unlikely
but as a note, save money with getting two dimms
unless four is cheaper
four just means more issues, technically speaking. More points of failure
just spend the extra money on more memory (24gb/32gb), or some food for take out, or something else. I personally wouldnt go for 4 dimms
Ty BTW 😄 very much appreciated
np
And is this board good ? I’m most likely going to use a ryzen 5 3600
ASUS ROG CROSSHAIR VI HERO (WI-FI AC) AM4 AMD X370 SATA 6Gb/s ATX AMD Motherboard
@brazen cradle no lol thats an x370
Buy a b450 for a 3600
Unless you meed gen4 speeds
@oak sand don't compare chipsets for motherboard quality. X370 as a chipset is better then b450
When giving reasons to buy/not buy something you need to make sure it's correct. Like instead of that you could say for the same price you could get a newer and better board
List out what is good/bad is also something to notice. (haven't checked but examples) like say maybe the sound chips isn't that good, VRMs are meh, and maybe BIOS sucks, idk
question i have corsair vengeance pro ram and one of them rgb kinda faded does anyone know anything
Are you using Icue @waxen marsh
@weak hamlet sorry, but no i've been using mystic light so i can sync all the color
my ram's colors go crazy too, but i found that controlling it with icue worked best
surprise
now the light is on but one of the ram that is not broken change it's color while the broken one is static
now it's fixed thx
rogue rgb
@long geyser my bad, but at 200$ you may as well just buy an x570
@urban ferry what's your mobo?
msi mpg z390 gaming edge ac
You tried mystic? Only issue I had is the ram color change is a bit delayed compared to the rest of the system.
icue and mystic light fought over control
@oak sand yeah, def use that price to perf point instead
@gritty meadow can you help me again when you get the chance
ask away @tacit hemlock
So... i hate to be a thorn in your side but i was gonna buy the mobo today and either i can't find it or it went up 30 bucks in price
it is just out of stock
alright so should i wait
well, lets start by actually making that list useful :)
lol ok
which parts have you already purchased?
...none
i will fix things up and post a link at the end of our chat, okay?
sounds good
what was your budget again?
for which parts?
oh yeah, you are the one that has some of them already?
I was planning on 300 for the R5 3600 and mobo combined
yes sir thats me
i have everything but the mobo cpu and ram
okay, let me just fix that up then :)
Thx
https://pcpartpicker.com/list/RQVLdm <- that list should show things as purchased
can you confirm that @tacit hemlock
now, i seem to remember that your audio gear was mini jack based?
correct
okay, this will take a bit, i have to find a replacement board with the same chip.
5-10 minutes and i should have an answer
15?... 15 years maybe?
15 decades perhaps
15 millennia
15 eons
15 15s
there are 2 boards that are options.
one is a m-atx
one is a atx
the m-atx one is already on your list, and is currently out of stock
it costs 95
ok
the other is a ATX version of the same board, that costs 120
ok could you send it to me?
that is the direct link for it
ok so no main difference between the boards besides size right?
that is the only difference (that matters to you)
yes
ok
keep in mind the shipping
So do you think i should wait for a restock or just get it over with and get the atx
it has free shipping for me
that is your call 100%
ok
https://pcpartpicker.com/list/Ddm7sk <- that is the list with the ATX board
Technically... the atx board is better in that fact of more pcie slots and such, whether i need them or not, right?
lol i guess so. i only have a few cows so i guess i don't need that big of a barn 🙂
So, i know for 100% the two boards for me (I will not be closing those tabs) and i guess ill give it a few days to restock
I think ill still buy the cpu tho
because its on sale rn
I like mATX boards a little better now anyway
you can use the different lists
ya
have a good one
likewise :)
and hello again @fossil bridge
hello
basically im asking what atx board i should get for a r5 2600
oc'd to 4.1ghz
the OC part is not something that can be promised.
thats ok
do you currently have it OC'ed?
yes
then, save the money and be happy
yes
save the money and buy something later on, fx a better cpu next year or something.
or a better psu
or gpu
just dont invest in something that only gives you a bigger board
especially not when you dont have to :)
aye, i know
okay
that is "want" running around screaming "need" at the top of its lungs :)
also known as the "ooooh! shiny!" part of all builders :)
true
im gunna take arctic's side here cause MATX in a full atx case looks bad imo. i bought a new mobo just for looks lol. why would you say no to just getting a new mobo? i would assume if he can oc on a b450m he could do that same oc on an x470 right?
but yeah, save the money, mark it as "for pc parts" and keep saving up
there is no promise about that @crude path
i like to build for looks tho 
there are plenty of other things that could be upgraded way before the mainboard
well yeah and that was my case too. i went to microcenter on a whim and the mobo i wanted dropped from like 150 to 110
a bigger ssd would be nice for you
i was like "STEAL"
aye, that sounds sensible, i would still keep the hdd around thou.
oh i am
just tell windows to let it spin down
lol
i was planning on throwing it into another pc for storage/streaming
even though i have like 3 other hdds for it lol
:)
though i would like to have a few hdds in my current build
i currently have one in the 3.5" spot and one just resting on my gpu atm
i solve that, by having external docks
enjoy :)
you are very welcome :)
Are there some mobo ‘features’ / ‘specs’ you particularly need / want
@tulip talon that depends entirely on your budget.
Let’s just say like 120$ for it
That’s my budget lol
I was think about the rog strix bored for 125$ is it any good?
fairly overpriced IF you dont actually take advantage of what it offers
is there any particular reason that the board has to be ATX?
That case supports ATX but also M-ATX boards.
@tulip talon the TD500 as @fleet inlet said, supports ATX, M-ATX, ITX, so there is no problem there.
Ok cool what would be a good one tho either or
we still need an answer for the question @fleet inlet asked earlier
"Are there some mobo ‘features’ / ‘specs’ you particularly need / want"
because without some details, we cannot suggest anything
Hello all, I was looking to upgrade my motherboard. I have an i5-9400f and I don't know which motherboards I should look for that support it
why do you want to upgrade you mainboard?
One of the reasons is the ram is limited to 2666mhz
Another PCI Express slot would be useful as well
So I've been told haha. But either way, I still would like to look for a new one
next question: what will you use an extra pci-e port for?
(and i am not trying to deny you an answer, i am just trying to make certain that there is actual logic behind a potential upgrade)
Potentially sli gpus at some point
Tru. The main focus here is just wanting a newer motherboard that has faster DDR4 speeds. And more m.2 slots would be useful as I only have one
it is your money
but that sounds like "want" screaming at the top of lungs while waving a "need" flag
I look for 64 gb maybe m.2 slot and just a motherboard that’s gonna last and rgb would be nice
the socket you need is 1151, the trick is to remember to look at the mainboard and check that they have 9th gen cpu support.
so ur sure those are legit
