#server-hosting
1 messages · Page 6 of 1
did you check your windows firewall settings?
That is the vodafone router. I had trouble with IPv6 host exposure doing bullsh*t like exposing all ports instead of only the one I specified, needing multuple apply/save/update interactions for anything to take effect. So I am not convinced the router works properly in regards to port-forwarding.
Anyone knows how i can run the script from Tatzy in an online web?, because the only way i can make it run is if i host the server and script on the same device, but if a friends hosts a server, and i run the plugin, it wont work even if it has everything that it needs, so my question is, is there anything i can use like an online web to run the script and make it work?
I still can't solve this problem
indeed. other services i can route also correctly
this is what i get too
maybe someone will help us
i did not found any good "How to install a Dedicated Evrima Server" Video or Website. To be honest i would prefer a Debian/ubuntu more then a Windows tutorial.
i found this:
does anyone know if the Server uses IPv6? this can cause trouble too... in my case i have deactivated ipv6
I was able to resolve the issue. In the Windows Firewall settings, I realized that I had only opened the port (7777-7778 | 27015-27018) in the inbound rules and was using the IPv4 in the .bat file.
First, I opened the port (7777-7778 | 27015-27018) in the outbound rules in the Windows Firewall settings. Additionally, I made a adjustment to the .bat file by replacing the IPv4 address with my public IP (MultiHome=publicip?Port=7777?QueryPort=27015). And in the router both ports should be open too.
I need help I m trying to play the new update and to play evrima but it says DX12 is not support on this systam
Dose any one can help me
you're best of ask in #🔧-evrima-troubleshooting-🔧 rather than here
Q: for anybody with knowledge does someone know how to set up a bot where you can teleport to a player in game by safe logging and using a command in discord as a player? (im not sure where to ask this but im tryin to start my own isle server with this feature & ive seen other discords have it set up)
@deep remnant Are U A Active Discord Mod That Knows What Im Talking ABout Above?
i do not know anything about serverhosting
oof 😦 im trying to find someone that can help setup a code for my isle server n a bot to allow players to TP on there own to other locations by using a players in game ID
Evrima or legacy?
If you want to request ingame assistance head over to the evrima-channels corresponding to your region and check the pinned comments there.
anyone know how to run server at higher frames
Game.ini não é pra isso
Game.ini is not for that
but whitelist is inside that file, so...
Yes, but the ban list is in another file. Try banning someone as a test and doing a search
Pretty sure the servers are locked at a set fps
1°
2°
anyone know how to set up FTP on a local server?
it's a dedicated server so it doesn't need to render anything. all resources go into comp and network..
If the servers use bucket sync that it doesn't matter as much because hitching will still be a problem
hosting on Streamline Servers and just changed to Evrima and cannot get the server to show in the unnofficial server browser. is there a specific issue that needs to be addressed to get it listed? Even Streamline is having a hard time figuring out why its not reading the game.ini file and giving some wierd 90174877841453068 as the server name. Thank you in advance.
@cedar ibex helped Streamline Servers with a post they made about the game.ini for Evrima that fixed my issue. Thanks a million!
your welcome
For people that are self hosting and have an issue with UNET Drivers and people connecting, check if your host has a global firewall setup. Like my host, OVH, I had to configure their GAME Firewall that directly overrides any changes I made to my own iptables.
In game replays for evrima still working?
me too
Is there a way to have AI carnivores?
Also for Isle Evrima what does GlobalIsSpeciesOnly do?
probably make it so utahs can communicate from far away, idk because i can't play evrima
check the latest dev-log they are working on it (carno I think it was)
it does nothing as it is legacy setting not for Evrima.
This to your server or some one your just trying to join
This is what you need to read if it’s your server
This
my server
Who is your hosting company
I have ovh and we had to adjust the ports in the the firewall to get it to work basically the firewall was blocking people from joining
And the firewall was overwriting the ports every time we would open them
how do I get a server
why dont work my server anymore and cant make a new one whit login anonymous he say to need login it that new ?
when i host in legacy it just gives me a black screen
[2023.08.07-16.20.12:811][ 1]LogNet: Error: UEngine::BroadcastNetworkFailure: FailureType = NetDriverListenFailure, ErrorString = , Driver = GameNetDriver EOSNetDriver_2147443352
[2023.08.07-16.20.11:989][ 1]LogSockets: Warning: Could not serialize ...?Port=7777?QueryPort=7778?MaxPlayers=100?game=Survival, got error code SE_NO_ERROR [0]
I am having these errors, but i set up the port forwarding correctly, i guess.
someone know what may be wrong?
anyone?
l
hallo ich brauche einmal hilfe ich möchte einen evrima server hosten nur weiß ich leider nicht wie und wo kann mir da jeamdn helfen?
Please use english only.
sorry
hello i need help i want to host an evrima server but unfortunately i don't know how and where cansomeone help me?
just rent one i guess?
Managed to get a server up and running on my own but i need testers, if you have free time please feel free to dm me :))
👍
can someone help cus when i launch the game then host a server and confirm it just turns into a black screen but the sounds on and literally nothing else happens apart from that
That doesn't actually work, can't host server from ingame
is that evrima or legacy?
that's legacy
so what does that mean
first off, if you want to play the new version, evrima. You are on the wrong branch. If you want to host a server regardless, renting one from a hosting site is the easiest way
Legacy is the old version of the game which isn't updated anymore, Evrima is the new one
HOW DO I INSTALL THAT
i literally jsut bought it on steam
how was i supposed to know that
oh
It's not easy to pick up ^^
im updating it
looking for help from a server owner about getting a server active ^ please feel free to dm me, all tips are grately appreciated
what sorta help, most of the questions are asked and answered in here already
mainly getting more players into the server, places to advertise etc... or even partnering with a server
as well as finding testers to help with the server 👀
ah alright
Hello, has anyone explored all of the [/Script/TheIsle.xxx] that can be used? It would be very helpful to have a mapping of all these possibilities. Thanks in advance.
Question for Evrima, what does it mean if you correctly loaded the rcon but it isn't letting you type in the box that pops up?
Hi,
i have exactly the same problem. however, I host the server on the same computer. maybe it doesn't work that way? did I forget something?
I unlocked ports and tried it out with exposed host for a short time, but the same error occurs.
I host on my computer with APM instance manager, so far I've only had good experiences with it.
O do it from another pc hosting and it is be the same prob
@narrow locust I think I found the thing that I meant is the cause for your guys predicament:
https://en.wikipedia.org/wiki/Network_address_translation#NAT_loopback
Network address translation (NAT) is a method of mapping an IP address space into another by modifying network address information in the IP header of packets while they are in transit across a traffic routing device. The technique was originally used to bypass the need to assign a new address to every host when a network was moved, or when the...
I believe your routers do not support this NAT Loopback/Hairpinning/Reflection is why you are not able to connect to your own server.
What are your routers? Check if they support RFC 5128.
Anyone that can help me figure out how to host a server? >.>
How do I make a server in evrima
Uhhhh how to host a server- with evrima-
same... i got a problem with the dedi server when i will play evrima and host it on the same hardware.
then i cant join the instance..
Evrima server, anyone know how the "Discord=xxxx" section is supposed to be formatted? trying to add Discord to the server and I keep getting an error when starting the server
So is there no other way to connect to your own locally hosted server except through a VPN?
It's normal, a bug
we have the right to pub for our servers?
Bub?
Ha sorry pub
it it possible to host a server in evrima without port forwarding the router? like if u just port foward on ur pc will it still work?
No
The router needs to know what LAN IP to redirect the WAN IP (public IP) to. That's done through port forwarding it NAT'ing
Player safe logout
Player login
Server: you don't have any dino \☠️
@hoary cave ;-;
The Isle has always had bugs, but it seems that with each passing day, they keep increasing. Community servers are the ones that suffer the most from this, including performance issues...
We were receiving reports of players losing dinosaurs when logging back in, but now this has become a frequent occurrence, where everyone who logs back in loses their dinosaur.
Hello guys,
I'm looking for documentation on "RCON", specifically regarding byte encoding. So far, I've only identified the following commands: "ANOUNCE", "saveServer", "banPlayer", "kickPlayer", and "playerList".
Below is a sample of the code I've been working with:
def saveServer():
cls()
SAVE = bytes('\x02', 'utf-8') + bytes('\x50', 'utf-8') + bytes('\x00', 'utf-8')
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
s.settimeout(timeout)
s.connect((ip, port))
s.send(SAVE)
As you can see, depending on the byte string, it's possible to execute different commands from the administration panel. However, I still don't have a complete mapping of all the commands. Does anyone have more information on this?
Thank you! How silly I am! It was right in front of my eyes
My server is also experiencing this issue
can someone please give me a good verifeyd sever hoster that i can host my sever on for the isle evirma
im stuck and need help
yo tryna make a dedicated lan server for evrima and get this when trying to connect
this isnt the channel to request help in. you need to go to the evrima chat that matches your server and read the pins to see how to best go about requesting assistance
Either your ports are not properly open or this #server-hosting message
ye idk i was trying to 1v1 my brother through lan, ive given up too much effort. he'd get destroyed anyway
someone there who can help me with my discord bot für Evrima Server? o.0
my code in Java.Script
client.on('ready', () => {
console.log(`Eingeloggt als ${client.user.tag}!`);
setInterval(() => {
const rcon = new Rcon({ host: rconHost, port: rconPort, password: rconPassword });
rcon.connect()
.then(async () => {
const response = await rcon.send('Get Player List');
const players = response.split('\n');
const onlinePlayers = players.length;
rcon.end();
const channelName = `${onlinePlayers} Spieler online`;
const channel = client.channels.cache.get(channelId);
if (channel && channel.type === 'GUILD_VOICE') {
channel.setName(channelName)
.then(updatedChannel => console.log(`Kanalname aktualisiert: ${updatedChannel.name}`))
.catch(error => console.error('Fehler beim Aktualisieren des Kanalnamens:', error));
} else {
console.log(`Kanal mit ID ${channelId} nicht gefunden oder kein Sprachkanal.`);
}
})
.catch(err => {
console.log(err);
});
}, 60000); // Alle 60 Sekunden aktualisieren
});
// Bot einloggen
client.login(token);
}
and my error;
Error: Timeout for packet id 0
at Timeout._onTimeout (F:\Repos\DC.Bot\node_modules\rcon-client\lib\rcon.js:106:28)
at listOnTimeout (node:internal/timers:569:17)
at process.processTimers (node:internal/timers:512:7)```
do i something wrong? o.0?
I'd say double check your host and port. Make sure the server's firewall allows the rcon port (not just the game ports).
the server is currently still running at gPortal :/ they should usually be open and not blocked.
I have already pinged the port with the ip, that worked
did you succeed connecting with a normal rcon client?
which one can i use?..
just trying to rule out that it might be a server setup issue
okay..
sorry, I have never used one but I imagine any unix distro has it packaged
hm okay..
ComputerName : 185.239.211.100
RemoteAddress : 185.239.211.100
RemotePort : 10320
InterfaceAlias : Ethernet
SourceAddress :
TcpTestSucceeded : True
this is coming back
Which rcon library/class are you using? o.o
and which port & password do you have configured in your Engine.ini?
I'm using python but should be the same concept.
Bibliothek: "rcon-client"
port: 10320
PW: something like this fd7654DFTH3456
and yes, in the .ini rcon is set to true 🙂
Well from the npm page:
A simple and easy to use RCON client made to work with Minecraft servers.
I still haven't been able to really identify what's going on, but there is a certain instability with the Server Side. I thought it was Windows Server 2022 but I switched to Linux Debian and not much has changed.
I've resorted to restarting the game server automatically whenever any cpu core consistently goes above 80% while there aren't any players online.
Not a complete fix but gets it stable-er.
Not sure if this is necessarily the root cause of issue. Even running on a cisco ISR with the capable features and the server will come up but be unconnectable but for others as well not just loop back connections. However this latest version appears to have resolved somethings as me and a couple of other users are able to connect to our local servers again. It seems sporadic as they update the game for the server to work or not despite being configured correctly.
Can you guys give me the link for asura(both legacy and evrima) and noobz cause I am livin in Asia
Have a look in #unofficial-isle-communities
I meant the link that allows me to go in the server
How do i make a server?
You can't use any old rcon client. You have to use one made for the game. @silent slate @sinful slate @shrewd barn
@wet ridge I made this a while back with all of the supported commands. https://github.com/modernham/The-Isle-Evrima-Server-Tools
Don't think rcon has had any updates but if so I can add them in.
Try using just the invite code at the end of the link in place of the X's.
Ty
Does anyone have an updated list of server settings/options for evrima servers that can be changed in the Game.ini and GameUserSettings.ini. I found the guide here https://isle.fandom.com/wiki/The_Isle_Server_Settings_and_Configuration, but this seems to be for legacy and also seems to be missing a lot of options
Thank you, I'll give it a shot!
How do i make a server?
does anyone know of a server you can do 1v1s
Anyone got any idea why RCon won't work?
Ports are definitely open
Game.ini reads as follows:
`[/Script/TheIsle.TIGameStateBase]
AdminsSteamIDs=
[/Script/TheIsle.TIGameSession]
ServerName=Test Server
MaxPlayerCount=150
bEnableGlobalChat=true
bGlobalIsSpeciesOnly=false
bLocalIsSpeciesOnly=true
LocalChatRange=20000.f
[/Script/Engine.GameSession]
MaxPlayers=100
[/Script/Engine.Game]
RconEnabled=true
RconPassword=password
RconPort=8787`
replace RconEnabled=true with bRconEnabled=true
Nice one, thank you. That has fixed the issue.
Devs might want to update the pinned message here: #server-hosting message
In these scenarios you are allowed to tag Punch. @hoary cave ^
Thanks, didn't know the etiquette, every discord is different lol
No worries - it's written down in our discord rules as well if you are unsure.
👍
Hello, does anyone know of a method to have a logs on discord, for a linux server.
Yeah, you'll need a bot for that, you can dm me if you want
I still can't get into my server
Firewall disabled to rule out port issues on server. Router port forwarding set up for relevant ports. Port 7778 is not working for the server despite that. "netstat -aon" shows all the other ports as active connections but 7778 is missing. Any ideas?
You are unable to connect using the same machine as far as I know
I'm new to hosting and have never wiped the databases before. what files would I be deleting PLEASE PING ON REPLY
You can just delete the playerdata folder
It didn't work, I tried to use my laptop for hosting but when I try to enter the server the same error appears
I've been told there's a way to body wipe on evrima. Is that true or just a rumour?
Rumour
need some help please I can not seem to get a map to work even though i did all it said to do and no one can find it thank you here is a link on my server
Set up pterodactyl please 😂 thats alot of vm's
i am unsure of that i never had issues withthis though i have rack systems i could try on another clean rack that
pterodactyl you have link ?
but for now can this be fixed ok ?
this runs on enterprise servers so it can host 1000s of game servers or vms
anyone back yet that can help me fix this server thx
That looks like evrima to me, there is no other maps than spiro for that.
I tried to reinstall now i get a whole new set of errors do any of those server install directions work or up to date?
@spring sage
Hi,may i ask how to start hosting a server?
If you want to try run evrima server can try this guide https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
It looks bout right.
Also the Part with the cli options is right? -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
this looks like some specific id
i try this but i dont see my server in the list someone help me ?
my log look nice but i dont see it
Queue system listening on: 0.0.0.0:7779 ,some peoples say the servers automatic detect my ip
when i try to connect directly with steam i got this on console
NotifyAcceptingConnection accepted from: 45.226.116.251:23162
How do i start a legacy server ?
help i'm trying to host a legacy server and when i run it with this script
cls
echo Protecting Isle server from crashes...
title The Hellhole Deathmatch 2
:TheIsle
start /wait D:\SteamLibrary\steamapps\common\ARK\Engine\Binaries\ThirdParty\SteamCMD\Win64\steamcmd.exe +login anonymous +force_install_dir D:\TheIsleServer +app_update 412680 +quit
echo (%time%) Isle server started.
start /wait D:\TheIsleServer\TheIsleServer.exe /Game/TheIsle/Maps/Developer/DV_TestLevel?MaxPlayers=100?IP=[my_ip]?Port=7778?QueryPort=27016?game=Sandbox -log -NOSTEAM | set /P "=
echo (%time%) WARNING: Isle server crashed or closed, restarting in 15 seconds.
timeout /t 15
goto TheIsle
-listen```
it does seem to start properly, when i enter the ip adress to add the server to favorites in the game servers section of steam it appears there properly (as seen in the image) and my discord bot for tracking player numbers does seem to pick up the server too but it does not appear in search results at all and when i try connecting to it via link it says `Unable to connect to server, app id specified by server is invalid.`
someone help me ?
i trying to host my server but the server dont comunicate
the ports 7778 and 7779 is ok
but teh server is not responding
the 7777 is ok when i chance it to queue
but to the in the server dont work
my server dont work in virtual machine in azure but on my pc its work nice
I tried that myself once. Since the effort is too much for me, I use mygameplatform.com. There you can host legacy servers for free and if there are free Evrima also these servers.
I don't wanna host it online i already have one on pingperfect
I wanna know why it just refuses to work locally
open a query port, I think 27015 is defualt, but you can set it in launch command line if that port is taken
If it's an Evrima server, and that doesn't help. dm me your game.ini , engine.ini , start script and latest log file and I'll see if I can spot the problem
how can i join servers, i cant find any server
Is there any raptor groups in N1
this isnt really the place to ask for that, you should ask in #evrima-na
how to fix DX12 error IN THE ISLE EVRIMA
how to fix DX12 error IN THE ISLE EVRIMA
pls help
Install dx12??
bro you have asked like 5 times, last time i told you make sure windows and drivers are up to date if that dosent work its probbably you having a Igpu not working with game
they may help you.
add '-dx11' to the launch option in the games properties on steam. @pliant hill
no it wont dx11 isent supported by the game anymore since engine update
Not just the game. Unreal Engine 5 as a whole dropped support for the outdated directx 11 that came out in my college years
I'm about to say, DX12 has been mainsteam for over 10 years to date in both engines and GPU's so I'm still very shocked that some people are running on DX11 GPU and expect a framerate above 10
Heyo! Is there any way currently to actually link discord with your server and use the "Discord" button in game?
I tried searching and scrolling up but.... Does evrima server work on ubuntu yet? 🙂 saw an article online but they're linking their personal git so... don't wanna use that 😄
It does yeah
Has this patch made any modifications to the server logs?
Or is it simply that I misunderstood it
I have no unexpected errors in my logs but the server isn't showing up when I go to search for it... Seems others have ran into this but I don't see a resolution. Anyone else know how to fix that?
probably not, but im not sure, because there is not change log
thx
Found the issue. When starting the server for the first time and the Game.ini file is generated, it did so with two objects named:
[/script/theisle.igamestatebase]
[/script/theisle.igamesession]
I saw online people referenced them with a "t" ad the begining of the property:
[/script/theisle.tigamestatebase]
[/script/theisle.tigamesession]
windows server 2019 host the isle evrima
i got tthe same error did u find it
could someone help me get facility badge
im brand new to this game so i know nothin
Think it would work with windows server 2022 hyper v?
If anyone hosts through a third party company with this game, do you have any suggestions? Would love to get an evrima server up and running, but trying to find a reputable place to host through. Thanks in advance!
(Please ping or else I won’t see the message)
Just made my own server and was wondering if anyone could or knows someone who could make or has a bot for Evrima?
Currently you implement any discord bot for evrima, but this will cause Server instability. You'll need to put on a scale if you want technology or stability features, unfortunately.
Calls in RCON have been very unstable, especially when you want to send announcements with a certain periodicity.
Yeah I dont know much about that side of things, but I was told to ask here because apparently there is someone in this server who makes custom bots who can do a lot with evrima my friend just doesn't remember that persons name lol.
hello, I would like to create a python discord bot linked with a the isle server.
Could someone please explain me how to communicate with the game server? I know that I need to use the socket module, but I don't understand how to get datas I want
thanks for helping 😄
@cedar ibex can u help ? u help me before so.. i try ^^ sry for ping
Sry bud, but as I've said before, since the devs don't do anything towards the server hosting side of the community regarding documentation, and it's been asked so many times with mods removing messages when we criticize them, I'm not spending a single minute on this game until the devs themself show some interest for the server hosting side and do some proper documentation
It's true that it lacks documentation, sorry to bother you. It was just an info about our bot to help Yaakin ^^
Hello, I'm back 😅
I think I've got how to communicate with the server, but I can only send 2 commands: the player list, and announcements
Other requests just don't affect the server and the socket times out
So if you have somr ideas about why this problem occurs, thak you...
Does anyone know what is causing this issue? Server won't show up on the server browser (evrima)
Does anyone know how to remove the extra stuff below ping and FPS? I'm not sure if its for my entire server or if its just my personal settings
are there any australian legacy servers?
its better to ask that in #isle-discussion
yh wasnt sure where to ask thanks
@raw dune Read the pins in the regional server chats, they will explain how to request one for the region you're in (NA, EU, AU, SA). This chat is not for unstucks
u have helped alot already but if u could answer me this that would be great (take ur time and again thank you
#server-hosting message like that
it says "channels" (which channel is most suited for my problem?)
Check wich region your stuck dino is on and select the discord Channel for the same region(eu, na, au, sa)
Hello, Can anyone help me by giving me a way to connect to Rcon using some language (Javascript, Python) to grow?
If it's evrima, they don't have any for grows.
Legacy I have no clue, never touched server stuff back then.
<@&505047238674874368> im stuck on na3 my name is [TG]MAV
Please do this in #evrima-na
small problem they dont answer
Admins aren't always available
thats crazy
I have been looking for the hardware requirements for server hosting for evrima but have not been able to find anything. Can anyone give me some docusmentation or any information on what they use to host their servers?
They are yet to be announced as there are neither minimum hardware requirements for the evrima branch itself nor server hosting. Once evrima will become the main branch of the game (which currently still is legacy) these requirements will be updated in the steam store.
But those who are hosting servers may help you with this question regardless of official requirements.
yea i just have a wild variety of hardware so I dont want to use something way too powerful for it lol
is a 10900k too much or too little do you guys think
we have 10900k 12900k and 13900ks and xeons and different AMDs so i know we can host it, just a matter of what on 🤣
Hello! I can’t figure out the problem, a sudden error occurred, the server is not visible in the search, has anyone seen this?
???
Hello, can anyone tell me why the server crashes? <@&505047238674874368>
Hello! I would like to know if there is anything that can be done about servers created with the same name or similar to my community. We consistently have 120/120 players online every day, and there are some individuals who use my community's name to open servers. I believe there should be some form of punishment or prevention for this kind of activity.
<@&818552355796287508>
We have also encountered this crash on our server. Every time the version is updated, it is quite frequent, but it is rare now. If your server crashes frequently every day, you can try shortening the interval between server restarts. I hope this will be helpful to you
Thank you very much, I hope I will wait for a response from the developers, maybe they will advise something and solve our problem
Theres nothing to do sadly, not at the current stage.
The devs are not able to force close the server.
My server has encountered the same problem as yours since two years ago. Someone maliciously uses a server with the same name as our server, and they can copy the number of online players. Players can only judge whether they have entered the real server or the fake server according to the PING value on the server list and the number of real players after entering the server
as the MENIX said: The devs are not able to force close the server.
So I can only tell players how to distinguish between real and fake servers in my server community
Real quick question. Once I get my server up and running it should automatically be added to the Unofficial list right? There isnt a 3rd step to make my server joinable from the unofficial search list?
Super late, but my only recommendation for this would be to compare your hardware to the hardware available on sites that have rentable servers for the Isle. Things like Shockbyte, Low.ms, etc
I’ve been debating just offering free service for a bit in exchange for helping us test to a community or two. Just getting back end stuff prepped and ready etc. thank you for the suggestion 😄
Having issues enabling the f2 replay in my unofficial server. I have changed the game.ini file to bServerAllowReplayRecording=true but replay still does not work
Anyone know a fix?
should be bAllowReplay=true
Il give this a shot!
IT WORKED, TYSM
np ^^
Is it possible to host a Evrima server on your PC?
yes alot of people does it
I can't figure out how to do it for evrima
@golden flare can probably help you out he runs on
Hello again, Im looking for the .ini file to change ai spawns, ive seen how they were used in legacy and I am wondering if they are still available for evrima.
More specifically how to increase the amount of ai on the map
It's not possible and doesn't exist.
How do I get a server up and joinable using the dedicated server tool? And is it possible to use it on the newest branch? I tried to use a third party hosting service, (shockbyte, and nitrado) but I would much rather do it on my own pc. I got the game today, sorry that I am unsure of what I am doing.
in the pinned comments : https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
how can i get unstuck if admin isnt answering me
<@&401466542140817419> Hello I'm New Here
Where would I report a Bug with an unofficial Server not showing up?
Bugs are generally reported in #🐞-evrima-bug-reports-🐞 - but before you do that, did you just install the game for the first time? If so you most likely installed the legacy branch of the game. If you want to play the active development branch you'll have to switch to the evrima branch.
No I didnt just install the game. I just Opend a new Server on UnOfficals and its not showing up it says on bug report non offical servers bugs will not be accepted
Which branch of the game are you on?
Evrima
Switch over to #🔧-evrima-troubleshooting-🔧 for me please.
Hello
Can Anyone Help Me
I just Started My own Unofficial Server and its not showing up. I have Talked with the Provider I'm Going throw and they say there is nothing wrong on there end Has anyone run in to this problem?
Hello,
Someone can share with me the "codes/command line" (a list if possible would be great) to change some of the Evrima Server settings? Example: let people select an adult dinosaur. Waiting... (sorry for my english)
There are no settings for that
Thank you for the reply. and about available command lines?
Hello ✌️
I'm developper and i want to know, where can i find Kill Logs ?
Because i wanted to do a bot with KillFeeds etc ... But i don't know this game, i do it for a Customer
Yeah, i've find this folder, but, they've not the kills logs inside :/
Im supposed to have kill my friend for the test, but they've no lines that speak about it
Helpful "unofficial documentation" that I found that helped me to create my own dedicated server for The Isle Evrima.
I hope this helps someone in the future.
https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
Did teleporting to location coords get broken last patch? :/
I think so. It's not working for me too. ;-;
i cant join stress test servers what is going on?
is there an updated version of a list of server settings and configuration (https://isle.fandom.com/wiki/The_Isle_Server_Settings_and_Configuration) the wiki is not working properly for an evrima server - to clarify the Game.ini script names have changed (i found a working one on github) some are still working but in a different script others have changed names or arent working
it says its not full but when i try to join it tells they are full
this is for legacy only
the best instructions that exist (officially or from community) for Evrima that I have seen are here :
https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
which has been posted multiple times and is in the pinned comments
nope
thanks anyway
and it's all possibly gonna change again too anyways XD
Check the pinned messages in #🔧-legacy-troubleshooting-🔧
i just tried that, how long should it take for servers to appear?
I'm not sure, sorry, I haven't played legacy in a long time
what is legacy
The default version of the game, the one you're on. The game is being remade and can be accessed as a beta branch
so if I go to properties and click on betas and select evrima it could fix the issue?
Yup, you'll also be playing the version of the game that's being updated regularly
lets see what happens
Legacy will be replaced eventually
I guess I have to redownload it apparently
Yea, it's basically a new game
I saw a youtube video of the crocodile gameplay and thought "Wow, a game where I can be an asshole to everyone trying to drink water" and purchased it immediately
I've realized I have this same similar issue with games like Rust and DayZ. Server lists just not appearing
That's only on the beta so you're on the right track!
and now I am met with "easy anti-cheat not installed"
Go to the folder of the game. You'll find the installer on that folder.
how do I do that
Easy to fix. Common issue
Right mouse button on the game (library), go to Manage/Browse Local Files.
Does anyone know if the "discord button" that shows when you click on a community server actually works? Or is there a line I can add in server config to get the button to go to my discords server instead of the official one?
EU1 gateway crashed and people cant get in, waited on queue and was then stuck on connecting.
Please do a server restart.
server restarts happen every 6 hours
Hey, so I have been trying to get a server hosted on Linux to no avail due to steamcmd seemingly not being able to download the files? I have tried via Docker, Linux in a VM and WSL. Running steamcmd +login anonymous +app_update 412680 +exit yields either "timed out waiting for connection" or "unknown status 0x0" (I have also tried specifying force_install_dir) and no files are downloaded. I would love to be able to host a server, but not on Windows. Is there something I am missing?
If anyone currently has either evirma or legacy running on linux, would you mind working with me to get a snapshot the server files? I'm mostly interested in developing integrations with the game
Is it possible to open the new gateway map community server?
It'd the official button I tried it before
There should be a option for the community's and not lead to the official
Yeah it would be nice if it worked and didn’t take people to the official discord instead
Yeah I'm add that to suggestions when my timers off lol
And I've tried it with every unofficial server due to being curious
It just leads to the official discord
I’m sorry if this kind of question is not allowed here I just haven’t seen anything about it anywhere. my fps dropped to 20-40 when it runned 60-80 on evrima, does it have anything to do with the server still being a wip?
@lucid anvil there needs to be an addition to the engine.ini its documented in the pinned comments right under over the howto link
Evrima has linux files, legacy do not, but both can run on linux without issue
You can change it
I tried looking in my server hosting website and was unable to find anything, I’m assuming maybe a line or something added like: Serverdiscord=“link”
Hello, I need some help. If possible, a German one.
I created a the isle server via nitrado but it doesn't show up and I can't find the server via stream. Can someone help me?
Ask your host nitrado
It's discord=adATtc6N in TIGameSesion, but I'm pretty sure it's broken still. Think it was causing the server not to load properly or crash for some weird reason. Not tried it recently though so could be working again.
thank you, i tried this and my server would no longer populate lol so I think its safe to say it still isnt working at least not for me
I have followed this tutorial to a T several times. my server shows up as IsleServer yet my config and batch file both show the name I want. Whats happening here? https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
Aqui não é o lugar certo para isso. Acredito que você possa buscar ajuda em #evrima-sa mencionando o cargo de Server Admin acredito
can a message of the day be set on evrima servers? also would setting scheduled restarts be done through scripts?
Probably not
for the MOTD do you know what specific mod can do this?
pls help im stuck in horde eu 1
looks like a networking issue
What do u mean?
Have you port forwarded?
Yep
@dusk trout
I'm not sure then sorry
ty
how do i fix it?
i would double check if the port forwarding did save on your router/modem. also make sure to have those ports open on the computer/server firewall settings and then make sure that those match your ini files and whatever method you use to start the server
i would not post your external ip in this chat btw.
try using the default ports of the game 7777-7779 and see if that works; who knows what is using port 7878. I know some ISP's can interfere with port forwarding or there might be something with the specific brand of router/modem you have. other that that, i cant think of anything else. network issues can be wonky. i hope this helps
k
I have a problem with my server on Abuntu Linux
yes i have an evrima server, last time i got that error my game.ini file was configured wrong
can u send me your files?
?
using windows vps
No, but most likely my ports are closed and that's why it doesn't work.
can they not be opened?
If you are self hosting from home you may not be able to ping your own ports due to router not allowing loopback or such. But the server should still work fine. Did you try pinging server from different physical IP (not using vpn).
If ports are open most likely to be a configuration issue
is there any gateway server open?
Yea, swap to the hordetesting branch to play them
is there active players? thanks for the resposne
A lot of the servers stay near full, yea
You need to input the code found here #announcements message
Gateway
thank u
dinos for gateway same as evrima?
there are unofficial ST servers now?
Can we see our hp in percentage in gateway?
Besides ptera
And no
https://steamcommunity.com/profiles/76561198179040730/screenshot/2180365308447172085/ hemp me -201,384.129, 146,090.476, 25,482.182 GATEWAY
Check the pinned messages in #evrima-sa
make sure you have the right portr, and you're using your desktop as the IP
you gotta port forward properly
Dude, I managed to create my server, it's working!!!😄
problem solved, my server is working now!!
i have the exact same issue, how did you fix it?
It was very simple, I bought a BR VPS and configured it and it worked fine
a BR VPS?
VPS in brazil
oh
I configured my server to have more fps
do you know any way to fix this?
without buying a vps
you have to disable the firewall

yes
Hello, do you know all the commands or where I can find them?
yes
press insert
who joins my server, will receive free groth
Possible to host gateway?
not yet.
anyone know of any evirma death match or free admin servers? I wanna practice combat with a friend but I cant find any servers for it
this isnt really the place for this but, #unofficial-isle-communities scope and norden are 2 free admin servers.
oh my bad, where would be a good place to ask about this? Cause I found the servers but cant seem to be able to figure out how the free admin stuff works
to find servers, asking in #isle-discussion is probably best. to get the free admin to work, you need to join the servers discord and request it through their discord
ah okay, thank you for the help!
<@&401466542140817419> Hello can anyone inform me on how to own/start a server? Thank you!
not an admin
but if you check pinned comments in this channel :
Legacy : #server-hosting message (https://steamcommunity.com/sharedfiles/filedetails/?id=1502947359)
Evrima : #server-hosting message (https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611)
I decided to create this guide for those of you who wish to host a dedicated server. This is a server you can host on your computer and not have to rent a server.
Results may vary depending on yo
idk any info about buying them; cause i pretty much just host all my servers on my own hardware
Is there a definitive word from the devs as to what ports/protocols need to be forwarded for an Evrima DS? I know the community guide says 7777-7779 UDP/TCP, but are they all really needed? If I just forward 7777 UDP, the server can still be connected to, but then it also opens 27015 UDP. So what's happening, and what's really the correct configuration?
if you leave default configurations in place; 7777-7779, these are the ports that clients will connect to and negotiate with the server
the additional UDP traffic you are seeing is data passed between client and server; you don't need to port forward those, as they are in the dynamic port range and are selected automatically after negotiation, and will cycle and change as the clients are passing data and will be different from client to client
Thanks. The 27015 port is not dynamic. It is consistently opened
that port may be consistently opened; if a client is passing traffic
but the port itself is in the dynamic port range; commonly known as "dynamic" or "ephemeral"; these ports are used for dynamic allocation by client applications or services when establishing network connections
but promise you; you needn't worry about those to get clients connected and playing
if you really want to know 😆
if you have Steam installed on the computer hosting your server; it's likely Steam traffic
I don't run the Steam client on my server; thus no UDP 27015 traffic
What's the source of those snippets?
first one : google
second one : my own router port forwards
third one : known list of registered ports and their services : https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers#Registered_ports
fourth : netstat -ano output directly off my own server
No disrespect, but that's all generic stuff that I know about too 😀 And your netstat screenshot is cut off before the 27xxx range. I also don't run steam on this (headless) Linux server but of course steamcmd is used to install the DS
What I am hoping is that the devs can confirm how their specific implementation of the engine works
Appreciate your trying to pass on what you understand tho
i realize it's all basic info; that's the point
<<< IT Administrator; 20+ years
i realize now I didn't capture the full netstat output; apologies, I was at work tbh
by default; the game operates on 7777-7779; those are the ports clients will connect on
27015 is known to be steam game client traffic
so unless you change the ports; those are the ports you need open
All good, I've figured out what works for me, am going with that
the devs don't really have to waste time confirming that
as anyone could install the server; with default configs, launch it, and then see which ports it's listening on
I don't call giving the community basic information about the servers "wasting time", but everyone is entitled to their own view lol
time away from dev and hordetesting can pretty much be equivalent to "wasting time" for them imo 😆
especially when configs have been known and documented
Only by the community
by the community
across multiple iterations of the game
launching a server; reading configs, and dumping net info is not a lot of guess work; but ok
you asked a question; I gave you the answer
Sure, and I thanked you
this is starting to feel more a "measuring contest" (pardon my language i guess XD ) than anything at this point
Not at all. Genuinely trying to find info
sorry; i triggered the automod with a word I didn't think it would flag
Example: you say it uses 7777-7779 by default and anyone can find that by launching the server and finding the ports it is listening on. But 7778 and 7779 are nowhere in sight. Hence my reasonable question
because there can be / are multiple ports listening for the server
and if you enable queueing; there's a third
game uses 7777 in an unmodified config for the port players connect
i'm sure more could be gleaned from the inis and more thorough analysis; but honestly; the steam community guide is the right setup; if you want it to work, so 🤷
i've seen worse documented server clients; i've seen better
Thanks, but this is getting nowhere. My setup works, the guide is wrong imo
I'm not talking about query port, queue port or RCON port
The guide doesn't even refer to the query port. And the default it lists for the queue port is wrong (it is actually 10000)
the guide list the queryport and other settings further down
you mentioned linux; i honestly have no idea if / why the ports would be different in that case, but your answer should be in your config file
It simply doesn't
and the command you use to launch
Same on windows
queueport*
Which is totally different
queryport was legacy iirc?
i have both XD
and other servers
i'm just trying to help man
the game runs on 7777 by default
No, as I said, when not specified in the command line the query port is opened by default on 27015 UDP when a client connects
when not specified in the launch command; it defaults to 7777
made sure to get the full screen this time
Sure, game port default is 7777. I've never said otherwise
and if you have 27015 open; that is likely steam client traffic
but the community guide certainly isn't "wrong"
It's the query port. If I specify it on the command line, then the port specified is opened and 27015 is not
then that also explains why I've never seen it 🤷
i've had queryport in my launch command since as far back as legacy iirc
but it is a registered steam client port
and none of those servers I posted; run public through steams / game client server lists etc
But it still opens the port when players connect, and if another server is on that port then players can't connect
You would need different ports pr server yeah
Hi all, someone know maybe, starting from today my server not visible in game anymore, in log i found next
is the problem solved
@frozen bramble
@still sparrow Gateway is still in public stress testing and not available for community servers as of now.
Ok ty
create vps using proxmox ❓
I have a problem with the server not starting the session, does anyone know how to solve it?
Is gateway going to be rolling out for community servers with the update deploying sometime today or tomorrow?
Neeevermind
can someone maybe help me? I want the new Map on my Private Server but dont know how 😦
anyone else having issues with fatal error at launch ?
just add maname to ur game ini and say gateway did the trick for me
anyone can help my friend, they have restarted and updated the server multiple times but it isnt showing on the unofficial servers
ANYONE figured out how to still hosst spiro?
in this List just "maname gateway" add and it will work?
maps deleted right?
i added that line
i thought they said they moved it to another branch for those who wanted to play stable version , so i suppose u can still host them?
i think
do you host your Server over G-Portal? because if I add this it will not work for me 😦
sorry i rent my own machine no G portal for me 😄
what u mean it wont work? u just need to add a line that shouldn affect it ? i think
what about ping perfecT?
they have told us they are unable to change map/update us
nope it says "Server-ID" invalid
we have not checked yet tho if we dont get answers from gportal soon, will likely switch and try
G-Portal Support says maybe tomorrow it will run because now the Technical-Support isn't working anymore XD
XD lovely
that was my Answer by the Ticket
ask discount lol
So is there any PingPerfect users who can confirm that the update works for them?
good point I will ask if they give me that one Day because no Update for me XD
How should I compatibility TCP UDP?
Warning: Can't Find URL: Gateway: . Invalidating and reverting to Default URL.
i get this when open my server !
Guessing spiro is broken now?
broken, fix❓
the same here
add MapName=Gateway under your [/Script/TheIsle.TIGameSession], make sure your server is updated
@plush tendon
How should I compatibility TCP UDP?
What numbers do you think I should use?
yes it automatic update @plush tendon
no u need to configure it into the host i just figured it out, but you need to be on the correct branch of the game to see ur servers
into ur host file u need to replace -beta evrima +quit
with
-beta spiro0.11.59.04 +quit
than it doesnt give me the error and loads in rabbits and goats etc XD
and the evrima is -beta evrima +quit ?
is the gateway version , when u add mapname to the Game ini
if u add no mapname and u chagne it to what i hchanged it its seems to host a spiro map
Did it work? ? @cold burrow
so im guessint its running like normal
ajd thats my spiro map
if u are on the spiro branch u can go look for EDWAYANA and see if u can find a spiro map than u can say for sure it works i would need to update to the correct branch to see it, but if uhave spiro installed please check than we know for sure
My spiro map is open right now because it says Zehares, but I wanted to switch to the gateway, so I broke it 🙂
OH EZ
U NEED to add a line to your game ini file
thats it
ok works now XD but I can't open the Admin Console for Daytime or something XD
yea same here XD
Gotta reset your config and rebind it, its now called ADMINPANEL in the settings
server settings or player?
for me its insert didn need to change anything
Your local config aka player
You must delete the localappdata folder as well punch put something in announcements about it
im so confused
thats all what I have there is no Adminpanel for me
Getting this issue repeated over and over when trying to boot up a completely fresh Evrima installation
#announcements message do this.
the isle aspiro is work nice but when i add mapname i got the same error
.....
my server for gateway how do I do it
anyone having issues with server crashing?
yep
I have the same problem when I start the server
Sounds like they broke servers this update.
how to fix this
You need to add the new configurations.
ServerName=Official Evrima - EU 5
MaxPlayerCount=100
MapName=Gateway
bServerFallDamage=true
ServerDayLengthMinutes=45
ServerNightLengthMinutes=25
bServerDynamicWeather=true
bAllowReplay=false
bQueueEnabled=true
bServerPassword=false
ServerPassword=xxxxxxxxxx
bRconEnabled=true
RconPassword=xxxxxxxxxxxxxx
bSpawnPlants=true
bServerWhitelist=false
[/Script/Engine.GameSession]
MaxPlayers=100```
@distant minnow ^
Spiro's a branch itself now. You should be able to change it (if on a dedicated server) to Spiro's branch name.
i use this but have the same
Trying now.
what site do u use for gateway server hosting?
i use a virtual machine
virtual machine?
yes
what is that
the aspiro is working
nice
but when i take the code
mapname
broke
its a common machine with the ports open public ip configured
but dont give the game
I use vps to host the server
how do i update my server to tgateway?
every time I try to start the server this error appears
yea server seems to be disconnecting players every so often
that needs to be fixed asap
Okay, that seemed to do the trick but for some reason the server won't show in the listing. Going to test through Steam's server browser rq
Gateway or Spiro?
Gateway.
gateway
Make sure you adjust ports and verify you're on the latest version.
Also gateway servers take much longer to start now.
Yeah, just tried all ports on my server and none of em worked
I did verify in the console that ti did start.
It's normal for this to happen
Mines running fine after adjusting configurations. I run on a dedicated linux server however.
i use a windows 10 server and have this same problem
There's a bunch of new logs that have been added, but if that happens update your configurations if you haven't.
Yes
@gaunt spruce
For gateway
yes
NEW STAM IS PAINFUL
I already updated
for gateway
@hoary cave able to pin the new configs? 
Give it a bit and see if it eventually stops. As long as your config file is correct it should work if it worked fine previously
It may've changed some ports like Queue or RCON ports which you'll need to change to your ones in use
Wait, okay sorry this is confusing.
So is Gateway it's own server instance too, like they did with Evrima and Old Isle?
Or is it merged into the Evrima server instance?
but i have listen nothing about new ports
Also, only my game and SFTP ports are being utilized.
The hosting is the same as hosting Spiro, just new configs are needed as far as I can tell. All I did was update the server and added configurations I needed.
Mm, yeah that's what I thought too. Is there a specific config option for specifying ports?
my server dont find a map
I noticed in the console it's using the query port 10000, but that's not allocated to my server
url
For queue and rcon yeah.
Did you update the server?
yes
Check your configs and verify
[/Script/TheIsle.TIGameSession]
ServerName=Weenie Hut Jr.
MaxPlayerCount=80
MapName=Gateway
bServerFallDamage=true
ServerDayLengthMinutes=45
ServerNightLengthMinutes=15
bServerDynamicWeather=true
bAllowReplay=true
bQueueEnabled=true
bServerPassword=false
ServerPassword=
bRconEnabled=true
RconPassword=
bSpawnPlants=true
bServerWhitelist=false
[/Script/Engine.GameSession]
MaxPlayers=80
i think its change
i used the same but whith my rcon and queue ports!
What's the specific INI setting for those?
So I can throw them in and specify them.
[/Script/TheIsle.TIGameSession]
MaxPlayerCount=31
ServerName=
MapName=Gateway
bServerGlobalChat=true
bServerNesting=true
bServerFallDamage=true
bServerAllowReplayRecording=false
bServerDynamicTimeOfDay=true
ServerTimeOfDayInSeconds=21600
ServerLengthOfDayInSeconds=3600
bServerDynamicWeather=true
bServerPassword=false
bRconEnabled=false
bQueueEnabled=true
bAllowReplay=true
bEnableHumans=true
bServerAllowChat=true
LocalChatRange=20000.f
bGlobalIsSpeciesOnly=true
bLocalIsSpeciesOnly=true
RconPort=
QueuePort=
RconPassword=
Thanks, will try the port options now.
but i have the same
Okay, got the green on queue and RCON ports now
But still isn't showing
Or won't even let me add it to my steam server list
some <@&505047238674874368> help us ?
LogLongPackageNames: Warning: Can't Find URL: Gateway: . Invalidating and reverting to Default URL.
same problem as u bro
Warning: Can't Find URL: Gateway: . Invalidating and reverting to Default URL.
help
nobody ask us with the ansewer
just ask to play and wait
my isle aspiro is working
But gateway F
@amber magnet Please tell me how to install isla sprio
i user -beta spiro0.11.59.04 to update
but when i run server , it said Warning: Can't Find URL: Gateway: . Invalidating and reverting to Default URL.
wired, waitting for official people to answer
that's more of a punchpacket question, you should send him a DM
gataway
@velvet pumice did you read the new devblog btw? I think it has the answer you need
evrima seems no people play anymore
this is incorrect
u have to use -beta evrima
i add the new game.ini
i do all of this but i have a problem
I can't help you if you followed that, I don't know anything about server hosting
you'll want to DM punchpacket
i dm but offline
-beta evrima to update ?
yes
ki i will try
still ty so much
u trying to put aspiro update and play gateway
ki...
😅
i will try updata as usuall
then add the new game.ini
hope it useful
i am folish, haha , it said
spiro0.11.59.04 - Server branch for Spiro
evrima - Server branch for Gateway
how can i update by -beta spiro0.11.59.04, lol
yup, i will run gateway server
fatal error
some mod?
what are the requirements to run gateway server❓
does everyone's weather switch abruptly?
anyone have the commandline to start erima server please, one I have says no map found
heres too
yea i have the same problem of this...and i check my computer and another server, didnt find it too...
@narrow locustdid you solve it?
I have the same problem
??no way
Tested it on 3 machines now. Way.
It doesn't even work setting the gameusersettings.ini to read only, just resets it in client anyway. Rofl, come on guys...
The issue with steamid filtering picking the wrong player is still not resolved, either.
my issue is on the serve search gateway map
when i start server i got gateway url is not found
something about it]
You probably need to use the right game.ini
No, I host on my own server hardware.
Well, I try to, when old and new bugs aren't breaking sh!t left right and centre.
my aspiro is work fine
Anyone using pingperfect able to help me get ours up and going?
Sorry, I can't help you with this game. If you've changed the mapname in the game.ini, and formatted it like they said, it should work. (it ran the server for me)
AdminsSteamIDs=***STEAMID***
[/Script/TheIsle.TIGameSession]
ServerName=DEVSFIXKEYBINDSPLZKTHXBAI
MaxPlayerCount=69
MapName=Gateway
bServerNesting=false
bServerFallDamage=true
bServerAllowReplayRecording=false
ServerDayLengthMinutes=45
ServerNightLengthMinutes=25
bServerDynamicWeather=true
bAllowReplay=true
bQueueEnabled=true
bServerPassword=false
ServerPassword=xxxxxxxxxx
bRconEnabled=true
RconPassword=xxxxxxxx
bSpawnPlants=true
bServerWhitelist=false
[/Script/Engine.GameSession]
MaxPlayers=69```
Something like this
but the port ?
I changed nothing from my original command line that was running prior to this patch.
Only the ini above
Anyone having the issue of putting the new game.ini config format in and saving it, starting the server up again and the format that you just put in isn't there? Just goes back to the original? can't get my server to switch to Gateway or show up on the list
same
It looks like it now requires DX12 related components to run
But only Windows10 and newer systems will be able to support DX12
or Windows Server 2016
However, based on my search results, Windows Server 2012 can theoretically install DX12 in some ways
Yeah noticed that also
What’s the issue? I can take a look when I get home.
Same
I don't know, I don't see any 'started' text.
It's not showing up in server list
and I can't see my server in the server list
There usually isn’t a starter text as far as I’m aware.
Can you both provide your game.ini?
AdminsSteamIDs=
[/Script/TheIsle.TIGameSession]
ServerName=MariusWorkshop
bServerGlobalChat=true
MapName=Gateway
bServerNesting=true
bServerFallDamage=true
bServerDynamicTimeOfDay=true
bServerDynamicWeather=true
ServerTimeOfDayInSeconds=21600
ServerLengthOfDayInSeconds=3600
bEnableHumans=false
bServerAllowChat=true
bGlobalIsSpeciesOnly=true
bLocalIsSpeciesOnly=false
MaxPlayerCount=150
bAllowReplay=true
bQueueEnabled=true
QueuePort=7778
bRconEnabled=true
RconPassword=Marius067
RconPort=8888
[/Script/Engine.GameSession]
MaxPlayers=50```
game.ini
It's not something that comes from it.
RCON password is functional
this is new error
I mean he's leaking it
Oh yeah
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
[Core.System]
Paths=../../../Engine/Content
Paths=%GAMEDIR%Content
Paths=../../../Engine/Plugins/Runtime/SoundUtilities/Content
Paths=../../../Engine/Plugins/Runtime/Synthesis/Content
Paths=../../../Engine/Plugins/Runtime/AudioSynesthesia/Content
Paths=../../../Engine/Plugins/Runtime/WebBrowserWidget/Content
Paths=../../../Engine/Plugins/FX/Niagara/Content
Paths=../../../Engine/Plugins/Experimental/PythonScriptPlugin/Content
Paths=../../../TheIsle/Plugins/RVTObjectLandscapeBlending/Content
Paths=../../../TheIsle/Plugins/DLSS/Content
Paths=../../../TheIsle/Plugins/UIPF/Content
Paths=../../../Engine/Plugins/Experimental/ControlRig/Content
Paths=../../../TheIsle/Plugins/SkinnedDecalComponent/Content
Paths=../../../TheIsle/Plugins/DLSSMoviePipelineSupport/Content
Paths=../../../Engine/Plugins/MovieScene/MovieRenderPipeline/Content
Paths=../../../Engine/Plugins/Compositing/OpenColorIO/Content
Paths=../../../Engine/Plugins/MovieScene/SequencerScripting/Content
Paths=../../../TheIsle/Plugins/EOSOnlineSubsystem/Content
Paths=../../../TheIsle/Plugins/ImpostorBaker/Content
Paths=../../../Engine/Plugins/2D/Paper2D/Content
Paths=../../../Engine/Plugins/Developer/AnimationSharing/Content
Paths=../../../Engine/Plugins/Editor/GeometryMode/Content
Paths=../../../Engine/Plugins/Editor/SpeedTreeImporter/Content
Paths=../../../Engine/Plugins/Enterprise/DatasmithContent/Content
Paths=../../../Engine/Plugins/Experimental/ChaosClothEditor/Content
Paths=../../../Engine/Plugins/Experimental/GeometryProcessing/Content
Paths=../../../Engine/Plugins/Experimental/GeometryCollectionPlugin/Content
Paths=../../../Engine/Plugins/Experimental/ChaosSolverPlugin/Content
Paths=../../../Engine/Plugins/Experimental/ChaosNiagara/Content
Paths=../../../Engine/Plugins/Experimental/MotoSynth/Content
Paths=../../../Engine/Plugins/MagicLeap/MagicLeapPassableWorld/Content
Paths=../../../Engine/Plugins/Media/MediaCompositing/Content
Paths=../../../Engine/Plugins/Runtime/OpenXREyeTracker/Content
Paths=../../../Engine/Plugins/Runtime/OpenXR/Content
Paths=../../../Engine/Plugins/Runtime/OpenXRHandTracking/Content
Paths=../../../Engine/Plugins/VirtualProduction/Takes/Content
Paths=../../../Engine/Plugins/AI/MassAI/Content
Paths=../../../Engine/Plugins/Animation/ControlRigSpline/Content
Paths=../../../Engine/Plugins/Animation/ControlRig/Content
Paths=../../../Engine/Plugins/Animation/IKRig/Content
Paths=../../../Engine/Plugins/Bridge/Content
Paths=../../../Engine/Plugins/Editor/BlueprintHeaderView/Content
Paths=../../../Engine/Plugins/Editor/ObjectMixer/LightMixer/Content
Paths=../../../Engine/Plugins/Editor/ObjectMixer/ObjectMixer/Content
Paths=../../../Engine/Plugins/Enterprise/GLTFExporter/Content
Paths=../../../Engine/Plugins/Experimental/ChaosCaching/Content
Paths=../../../Engine/Plugins/Experimental/Dataflow/Content
Paths=../../../Engine/Plugins/Experimental/FullBodyIK/Content
Paths=../../../Engine/Plugins/Experimental/UVEditor/Content
Paths=../../../Engine/Plugins/Media/MediaPlate/Content
Paths=../../../Engine/Plugins/Runtime/AudioWidgets/Content
Paths=../../../Engine/Plugins/Runtime/GeometryProcessing/Content
Paths=../../../Engine/Plugins/Runtime/MassEntity/Content
Paths=../../../Engine/Plugins/Runtime/MassGameplay/Content
Paths=../../../Engine/Plugins/Runtime/Metasound/Content
Paths=../../../Engine/Plugins/Runtime/ResonanceAudio/Content
Paths=../../../Engine/Plugins/Runtime/SmartObjects/Content
Paths=../../../Engine/Plugins/Runtime/StateTree/Content
Paths=../../../Engine/Plugins/Runtime/WaveTable/Content
Paths=../../../Engine/Plugins/Runtime/ZoneGraphAnnotations/Content
Paths=../../../TheIsle/Plugins/Tether/Content```
cls
echo Protecting isle server from crashes...
title The Isle Server - Marius
:TheIsle
echo (%time%) Checking for updates...
start /wait C:\Server\steamcmd\steamcmd.exe +force_install_dir C:\Server\TheIsleServer +login anonymous +app_update 412680 -beta evrima +quit
echo (%time%) isle server started.
start /wait C:\Server\TheIsleServer\TheIsleServer.exe ?Port=7777?QueryPort=27015?MaxPlayers=100 -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
echo (%time%) WARNING: isle server closed or crashed, restarting in 1 minute.
timeout /t 60
goto TheIsle```
Yeah, we both have it
Are the ports forwarded?
yep
ServerName=
MaxPlayerCount=100
bRconEnabled=true
RconPort=
RconPassword=
bServerPassword=false
ServerPassword=
MapName=Gateway
bServerFallDamage=true
ServerDayLengthMinutes=45
ServerNightLengthMinutes=25
bServerDynamicWeather=true
bAllowReplay=true
bEnableHumans=true
bQueueEnabled=true
bSpawnPlants=true
bServerWhitelist=false
QueuePort=
[/Script/Engine.GameSession]
MaxPlayers=100
This is my configuration that works fine
Have you specified a server name?
.bat
Can you make a shortcut for theisleserver, right click it, go to properties, and where it says target add this
?Port=7777?MaxPlayers=100 -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
Then run the shortcut
Change the ports to the ones you forwarded
I can't write it all, this text is too long.
Sc?
what do u mean? I don't know many acronyms
Screenshot
I have all my servers on hosting and the main server is working fine, but the second one have this issue. Configs are the same (excluding server name and slots). The errors in log file are the same with Marius: the server have some connection problems with API
What do you mean main server? Like another gateway server?
I don’t think that matters much unless Epic has banned Russia or what not
As I do
The API errors is new, not something I have much knowledge about currently.
Shoot Punch a message and see. I personally haven’t had the issue.
Also I tried to ping this API IP at the hosting machine and at my PC, timeout raises in both cases
I even tried to turn on VPN, the result is the same
Should I ping Punch?
C:\Servers\TheIsleServer.exe ?Port=7777?MaxPlayers=100 -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | se
Ping or message. Either works. He is more likely to see the message though
@hoary cave
Not something I know a fix for currently. Just wait for Punch to respond here or message him.
punch dont respond nobody
Is there anyone who can solve this error?
how can i host a server??
Do the devs provide the deployment ID? I know they do client id and secret, but was looking for deployment ID to query my server for our server trackers.
TheIsleServer.exe /Game/TheIsle/Maps/Game/Gateway/Gateway ?Port=7777?QueryPort=27018 ?MaxPlayers=100 -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
Add /Game/TheIsle/Maps/Game/Gateway/Gateway
here is what my startup looks like, the map path is what you are all missing.
cls
echo Protecting isle server from crashes...
title Exodus Isle Server
:TheIsle
echo (%time%) Checking for updates... validate
start /wait C:\Users\Administrator\Desktop\steamcmd\steamcmd.exe +force_install_dir C:\Servers\Exodus\isle\ +login anonymous +app_update 412680 -beta evrima validate +quit
echo (%time%) isle server started.
start /wait C:\Servers\Exodus\isle\TheIsleServer.exe /Game/TheIsle/Maps/Game/Gateway/Gateway ?Port=7777?QueryPort=27018 ?MaxPlayers=100 -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW -ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
echo (%time%) WARNING: isle server closed or crashed, restarting in 5 seconds.
timeout /t 5
goto TheIsle ```
guys, i can join my friends priv server but my brother (on the same network as me) and the server hoster cant join, is there any... yk fixes?
Hello everyone, for the fella server owners, I have trouble to update my server from Spiro to the current gateway. Copies the code from the latest devblog but just failed and popped up these: [2023.11.15-02.22.44:367][ 0]LogSkeletalMesh: Verbose: [BodySuit] Skeletal Mesh is marked for CPU read. How am I supposed to fix it?
I just replaced my old one by the given gateway code
@gaunt spruce
That's not an error to worry about.
Or a error afaik
What do you mean, sorry I am kinda amateur here so could you tell what I should @gaunt spruce do next?
this solved my problem
Sorry I am busy right now, there should be tutorials in this channel.
Happy it helped!
i have some problems to add admins in game.ini
i tryed in some lines but it donsnt work
on gportal they only have options for legacy and spiro where is a good place to get a gateway server up?
I'd assume they haven't updated anything so Isla Spiro might just be evrima. All you would need to do is add the game.ini configs for Gateway.
I still highly recommend running a dedicated server (linux usually runs smoother) for The Isle due to the constant updates.
@gaunt spruce I wish I knew how to or could afford to run a dedicated but atm I would need the help a host could provide...
I'm presuming since I don't really know what you mean by adding configs then it would be even harder to get a gateway server up for me
thank you tho for the answer
Essentially all you would do is copy this into the game.ini on GPortal
ServerName=
MaxPlayerCount=100
bRconEnabled=true
RconPort=
RconPassword=
bServerPassword=false
ServerPassword=
MapName=Gateway
bServerFallDamage=true
ServerDayLengthMinutes=45
ServerNightLengthMinutes=25
bServerDynamicWeather=true
bAllowReplay=true
bEnableHumans=true
bQueueEnabled=true
bSpawnPlants=true
bServerWhitelist=false
QueuePort=
[/Script/Engine.GameSession]
MaxPlayers=100
I saw a youtube vid showing how to do it on pingperfect and the settings looked a lot easier to access than my experience on gportal
it seems more expensive tho 😦
I haven't used Pingperfect, but from my experience GPortal has much nicer UI design.
It would likely be under a button called Files > TheIsle > Saved > Config > LinuxServer (or WindowsServer)
you're awesome Kadin thank you, I will try my best to set something up
you've given me confidence
I used to have a conan exiles server on gportal so I think I can figure it out I hope at least lol
I have the same issue with one of my servers. I dont wanna restart my other in case it gets the same errors...
How to add Humans
how to show admin Commands
anyone else that gets these?
.
trying to make a new server but i dont have my game.ini or serverbat file
This is an issue. If it wasnt i would not have posted here.
<@&505047238674874368> I dont know where to put this so I ask here: My friend tried to join this server but had no profil picture. So she was instantly banned and cant join anymore. Can you help? She has a profil picture now tho
i know it shouldn't. But it does on every single connection. I have look at the firewall like 4000 times everything is correctly setup. But this ssl handshake just wont work. But i will keep trying.
Have you been helped with this? You can DM me more info
how to host server?
guys, i can join servers but my friend cant "lost connection to the host" whereas i never get this, is there a fix? we have tried alot (graphics, verifying game files, leaving call, joining different servers and all) but it never works...
Hey does anyone here know how to make one of those Advanced isle discord bots that logs almost anything in game I'm assuming that's an API that you need or something Does anyone know where the API is?
is it possible to change port range for P2P traffic (7777-7876) ?
I keep getting this when trying to connect to my beta server
did you get this sorted?
#server-hosting message
Nvm everyone it's been a long while since I hosted my own server on my spare PC
had to remake the server cause it was 10mnths out of date 😄
I have the same issue. I streamed the process and everyone is saying like " its the wifi" but it's not because my game was running perfectly before the gateway update.
<@&505047238674874368> I'm sorry for pinging, I'm not sure who else I can ask. I'm trying to see if my question could be answered regarding a deployment id that is used to contact epic's API to track server information like players, map, and server online status. I would like to discuss this further in private if possible.
That sounds like a punchpacket question. You'd want to DM him
Okay thank you, I will contact him regarding this. Appreciate the reply.
does anyone know if there is a server setting for the amount of fog or to completly disable it ?
no, on my media server but I fixed it. I deleted it and re-installed it. it was over 1yr old 😄 and gone through many updates from legacy - evrima - Gateway so there was bound to be old code and that in the ini files that would have gotten corrupted a long the way
does anyone know how to bring up the admin panel in game?
/adminpanel or press Insert (INS)
ins doesn’t work
You also need to be an admin.
how to i host a legacy server
Is anyone else having crashes randomly on their servers with Ping Perfect?
I was having issues. I had to update the drivers on graphics card and it fixed it. You could try that
hello everyone, i had i energy issue last night that turned off my pc and now my server is crashing
i start it, it loads a bunch of things and than appears a crash msg and it restarts. does someone know how to fix it?
im trying to remake my server but when i go to install in steam cmd with Force_Install_Dir C:\TheIsleServer its says it cant do it while im logged in and wont do anything when im not logged in
what's the rest of your steamcmd command? cause steamcmd allows anon downloading of the server tools
Force_Install_Dir C:\TheIsleServer
thats it
well that's likely why it's giving you problems
start /wait C:\steamcmd\steamcmd.exe +force_install_dir %InstallDir% +login anonymous +app_update 412680 -beta evrima +quit
that +login anonymous is important XD (and yes; should immediately follow the install dir afaik and in my experience)
probably don't need the -beta evrima switches tho; if you are doing new Getway server XD
and w/e the new app_update ID is if that changed with Gateway
do i just pastse this into steamcmd?
oi; should've thought you're probably manually running and I have scripts setups for all this
into a command prompt
so assuming that the app_update ID didn't change
open command prompt; type the following (or copy paste), then press enter :
start /wait [folder directory where you have steamcmd.exe saved]\steamcmd.exe +force_install_dir C:\TheIsleServer +login anonymous +app_update 412680 +quit
and for [folder directory where you have steamcmd.exe saved]; you should replace that with the location of steamcmd on your server
start /wait
also; you messed up the steamcmd dir XD
start /wait C:\steamcmd\steamcmd.exe +force_install_dir C:\TheIsleServer
assuming your steamcmd.exe file is located in the folder C:\steamcmd\
start /wait C:\steamcmd\steamcmd.exe +force_install_dir C:\TheIsleServer +login anonymous +app_update 412680 +quit
if codeblocks make it easier to read / copy & paste XD
i think this guide is outdated af
looking back at messages since the Gateway relase; maybe you still need the beta switch to get Gateway :
#server-hosting message
well yeah; that guide is for specifically "Legacy"
there's like; 3 "active" versions of this game now; and devs have yet to release any official documentation for setting up servers
this is for hosting Evrima : https://steamcommunity.com/sharedfiles/filedetails/?id=2952501611
and should be mostly correct; save for recent changes for gateway