#server-hosting
1 messages · Page 47 of 1
maybe if I connect via FPT
Np. Whos the best to get hold of around here, so I can bounce some troubleshooting on.
It is in there.
Config/WindowsServer/engine.ini
Yea, that's correct place. Not sure if the capitalisation matters on the file name tho.
I do have the EAC lkeys
[EpicOnlineServices]
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
Thing is, pingperfect contacted the devs, and they got it fixed. Gportal still haven't done shit
Whoo, one issue nailed, now showing in game ❤️ Now just steam to fix.
is it fixed?
for pingperfect
I can move host and ask for my money back lol
I don't care
Apparently
GTXgaming also has no problems as far as i know
We wanted to do that as well, but gportal won't refund or smthing like that? Not too sure
Service not delivered, if they won't do that I will through my credit card
and they can go to hell
All GSP will refund, if within a time limit, most are 24hours.
It would be a shame though
Fair enough.
Give them time.
As when it actually ran the performances were top notch for a good price
I had nothing to say
There is a reason you rent servers instead of throwing them up yourself. Sometimes issues like this happens and takes a few to fix.
We got a big server release on Saturday evening and expect full house 120/120
Will move host tomorrow if they can't fix it like every other host
They might not been aware, I was only made aware myself today. Hence doing some overtime lol.
Yes, but our problem is that Pingperfect took the initiative to contact the devs and get it fixed. Gportal did not.
Oh they've been.
Wish I was lol, cos this has been embarrassing 😦
Regarding gportal
Hi,
we are already aware of the problem and our developers are already working on a solution
Mit freundlichen Grüßen / best regards
steffiw
5 mins ago
The guy i've been talking with to get updates about their ticket with gportal, has been talking with support since update release
Pingperfect fixed it, Gportal did not.
Are pp the sponsored host tho?
Some of us are lucky if the devs even look at us and say hi, let a lone give us a goto contact for big releases.
I have no clue mate. Pp contacted TI devs, and fixed it. Gportal did not and are still "working on a solution"....
Fair enough, hoping I've fixed my issues for now, excluding the steam one. But hopefully I'll get that sorted soon. But now, I need coffee and feed the kiddos.
The boot loop you're getting btw, what's it say in the logs?
Feel free to DM it. But if it's constant spam in the logs making them Megabytes in size, then it's gotta be that key issue.
Lemme see
I'm not sure since i ain't a tech guy, and apparently the support said its a boot loop
But i'll try to find the correct logs
Np, should be in TheIsle\Saved\Logs\
It'll be the one without a datestamp for your latest.
I'll DM you it, since its hella long and would need to send it in parts
That's fine.
any clue how to fix the damn loop ?
I saved my Engine.ini and Re-Selected the Evrima command line but my PingPerfect server isn't showing up?
what do you mean by re-selected the evrima command line ?
@high reef Said
"If you're having issues with your server hosted by Pingperfect.com, please do the following:
Stop server.
Click "Configuration Files"
Click "Config Editor" for Engine.ini, specify an RCon password, then save the file.
Click "Commandline Manager"
Re-select the "Evrima" commandline - this will add the new epic online services commandline parameters.
Startup the server."
It doesn't even show a "Players" counter on the control panel
what about home based servers ?
We are having the same issue, Aron.
So is pingperfect out of the box fixed or not?
That's what I want to know, they obviously did something
But it's still not working it looks like
Our server was up earlier today, but after the restart it stopped showing up and the player count is no longer on the PingPerfect server page.
Wow, this is a mess
does any1 know how to bring back my G-Portal Server ? He doesnt show up
Every time I tried to join my server (Gtx) It said connection issue so I was wondering if this is a server issue or a game issue
anyone with a Private dedicated server luck fixing the damn loop ?
can anyone tell me where the best website/place to go to set me up my own isle server i used to have one like a year ago but had tons of issues on the site so looking for something more reliable this time around ?
Not here. I am waiting to see if anyone posts a fix for connecting to the server on the LAN. External users can connect fine, but any other machines on the LAN can not connect to the Evrima server.
Hey. so far i can't find any solution to the map loop thingy.. my server even wont start :S .. stupid update broke the whole thing. ingame also no favourites selection anymore :S.. what the fudge are they doing.
You need to add these two lines to the Engine.ini to get it to boot.
Not Gportal, that i can tell you. Pingperfect, GTXgaming or Logicserver
But once it boots Only external WAN users can connect.
thx for the fix :).. ill try it out now
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
cheers 🙂
Hooray.. 😅 its running 😄
i tried pingperfect cause i used them in the past but says the isle server specifically is out of stock...when i try to purchase a server :/
Try GTXgaming or logicserver
gtx isn't doing good
ok. server is working indeed. got already a player 😂
[2022.07.14-16.59.45:661][448]LogBehaviorTree: Warning: > Failed to find key 'Attacker' in BB asset BlackboardData /Game/TheIsle/Core/AI/Blackboards/BB_Fish.BB_Fish. BB Key Selector will be set to 'Invalid'
[2022.07.14-17.01.49:159][153]LogAnimMontage: Warning: Playing a Montage (Stand_00-IP_Montage) for the wrong Skeleton (SK_SeaTurtle_Skeleton) instead of (WildBoar_M_Skeleton).
[2022.07.14-17.01.49:160][153]LogAbilitySystem: Warning: UAbilityTask_PlayMontageAndWait called in Ability GA_VocalGeneric_C_2147472216 failed to play montage Stand_00-IP_Montage; Task Instance Name None.
[2022.07.14-17.02.33:841][494]LogAnimMontage: Warning: Playing a Montage (Stand_00-IP_Montage) for the wrong Skeleton (SK_SeaTurtle_Skeleton) instead of (WildBoar_M_Skeleton).
[2022.07.14-17.02.33:842][494]LogAbilitySystem: Warning: UAbilityTask_PlayMontageAndWait called in Ability GA_VocalGeneric_C_2147470737 failed to play montage Stand_00-IP_Montage; Task Instance Name None.
That's new.
i can find my server and connect to it 😄
I thought it was working just fine?
Is there a new start configuration for the server once it has finished starting up for Evrima?
This is what I got right now.
{
"done": "Anti cheat Session start result"
}
thx for the command line 🙂 .. its all working perfectly 😎
I'm starting to think that it's more of a game issue than a server issue, because I haven't had issues like that before with gtxgaming
im goin with GTX server will it automatically give me a legacy server thats what im wanting not the evirma one ?
You can choose most likely
For us, its on Gportals side
cause im at the checkout thing but it doesnt say anything about which server it is im purchasing just that its an isle server lol
let me see
okay thanks for all the help 🙂
can someone help with legacy
It should give both? Yeah, though you will pay double as far as i see
You can see 2x at the top
as far as i'm concerned it means both evrima and legacy server
hey so a friend of mine is having an issue with his pingperfect isle server, it won't show up in-game at all and the only fix involves locating and changing a file called "engine.ini", which he can't find anywhere
@merry urchin there is the answer
so i got my server all setup and everything it says its running but when i hit join from the GTX page is says server not responding and when i type the server name in the search on the isle i cant find it either? but on one end says its running like where i can hit stop and restart, then when i click join on connection info it says server not responding.
Are u trying legacy or evrima?
i have it set i guess default as legacy i never selected in the settings to do evirma
Which version of TI u have downloaded?
only thing i went in and did wa set the admins and change the server name so far
ive got legacy installed
N it doesn't show up in the server list?
no when i go into the actual game and search my server name is says no servers found
and on the gtx connection info it also says server not responding
even tho server status says running
i made sure i was typing the name in correct as well
now its showing up 😄
That's great 😁
thanks again for all the help 🙂
any help would be appreciated
cant fking connect to eu1
He should contact pp support
It was supposedly fixed before, but it happened again. The only thing he can do is contact support
any1 have his gportal server fixed?
alr I'll let him know
No, and we can't either. You need to wait till Gportal sorts the issue out. Its a problem on their side
Anyone can confirm GTX works fine without any funky manips?
If gportal is not fixed tomorrow afternoon I pull the plug
The server listings aren't showing the correct population. They are full. Just gotta keep trying to get in until an open slot is opened.
I have a gtx server and currently cant even connect to it I'm getting a connection failed message. I contacted support and so far everything they have tried hasn't worked
So basically 3rd party host works lol
Can you try connecting to Scope's server?
it's hosted on GTX also
Yeah I can try
thx
I'm able to connect
interesting loll
Is your server a new one out of the box
or did you play around in configs?
Ive had it up for about a week
Only configs I touched was admin steam ID and server name
The unable to find it is because they switched from using Steam networking to using Epic Online Services. This has the benefit of we can now see our servers over WAN (the server browser) but for some reason they don't let us connect to them this way. Based on my research from a similar situation with another game, if we were able to somehow join through the local address it would work just like it used to, however the Isle currently lacks a direct IP connection function so it's not currently possible.
does anyone know how to link a discord server link to the server for evrima? (we are using linux)
Are PingPerfect servers working at all?
Yes, I would love if they would have a direct IP:Port entry in the games menu.
ICMP port ?
From what I have heard no
Don't quote me on this
Hey, what to do to make the server on evrim work?
Damn damn damn, alright, I'm filing a support ticket
Looks like they're still working on it
oh?
Fixed main menu URL's not working.
Does its mean that discord link works?
They worked for a short while.
Yeah the server is on, but it kicks everyone out with this error message
Anyone knows to fix this [2022.07.14-17.48.54:096][ 0]LogOnlineVoice: OSS: Voice interface disabled by config [OnlineSubsystem].bHasVoiceEnabled
It's not like the server list ever worked fine. I had a server if the name had more than x chars it would stop showing up lol
day 1 of quoting this message until someone helps me with the legacy server
For gportal support staff the devs are mysterious creatures you can't ask any ETA from
In a france forum from 2019 stand" reset graphic card"
what
its a community platform that gives away servers for free
or you build the server yourself or you buy one there are so many possibilities 😄
<@&818552355796287508>
Does anyone here have their own Vm where they run the server off of?
What values in this wiki still apply to evrima servers?
https://isle.fandom.com/wiki/The_Isle_Server_Settings_and_Configuration#Game.ini
Isle server settings and configuration are controlled by several files and have subsections the value must be entered under. The following commands can be used in The Isle: There are several options available on the startup command line. TheIsleServer.exe /Game/TheIsle/Maps/Thenyaw_Island/Thenyaw_Island? Add the following options if running mult...
Considering that it was last updated February of 2020, probably none. Just use the doc in the pinned messages here, it's the most "official" source currently
In Update 5, if your server shows a ping of 444 or -1,000 you need to open up the ICMP port.
What is the ICMP port and how do we find it? And is this for players to open or is this server side/host side that needs to open it?
RIP so there's essentially no documented config variables for servers rn except what they gave.
Does pingperfect hosted servers function or they still need a patch from the devs?
There's these but from my testing the ones with red dots next to them have either been removed or change nothing noticeable. And then of course update 5 added the RCon ones but that's about all there is that we've been told about
Yeah, I've seen those. Was hoping I could tweak some spawn rates and stuff.
Anything that you can tweak server wise currently is through the admin panel in-game, but those changes don't persist past a server restart yet
same here
[2022.07.15-00.45.12:647][ 59]LogLoad: Game class is 'BP_TitleGameMode_C'
[2022.07.15-00.45.12:650][ 59]LogNet: Error: UEngine::BroadcastNetworkFailure: FailureType = NetDriverListenFailure, ErrorString = , Driver = GameNetDriver EOSNetDriver_2147480257
[2022.07.15-00.45.12:652][ 59]LogWorld: Failed to listen:
[2022.07.15-00.45.12:653][ 59]LogNet: Error: LoadMap: failed to Listen(/Game/TheIsle/Maps/TitleMap?closed)
[2022.07.15-00.45.12:656][ 59]LogWorld: Bringing World /Game/TheIsle/Maps/TitleMap.TitleMap up for play (max tick rate 0) at 2022.07.15-02.45.12
[2022.07.15-00.45.12:657][ 59]LogWorld: Bringing up level for play took: 0.000763
@bronze skySame error as me "DEDICATED SERVER"
is there any way to add a discord link to the server so that people can join that instead of having to post announcements over and over?
Yeah, the documentation is really poor. Even a lot of the stuff listed for legacy servers has apparently been deprecated at some point, but other than comments in this discord, that information is nowhere to be found
how do i join my own server its working for people outside my wifi but where do i enter my servers local ip to join
If you're meaning for Evrima currently me and others are also experiencing this issue and since they switched to Epic Online Services instead of Steam's networking, there's currently no way of doing it that we're aware.
anyone know how i can buy a evirma unofficial server?
i am assuming that there is no fix for the ports for ping perfect yet
Yes they work
if someobdy finds a fix for this one ping me, im also having the issue
Evrima's local network does not work I have a spare connection when I go to if I want to play on my own evrima server.
Rent maybe I don't think buy
with the new update i am having troubles setting up my server. I added the 2 lines that the dev said to add to engine file, but as soon as i try to add admin power with steam IDs or change the name of server it completly dissapears from the client. I am using G PORTAL as a host for my server. anyone have the same issue and if so were u able to solve it ? any help would be much appreciated
So when I create Evrima Server I have to create the WindowsServer folder and I only have the Game.ini in the folder where do all the other ini files come from? I don't have an Engine ini
Anyone know why there may be this issue? when joining my server users enter a loading screen and after 2 minutes users observe a black screen, the black screen is a softlock and users will not be disconnected and will have to restart their game.
Server logs when this happens will log "LogGarbage" and loops until the user closes the game.
same
Any news for GPortal my Server is still not showing up
I reseted mine yesterday and it worked but as soon as i added admins or changed server name its gone again
hit me up if u get it working properly
Ouf
did they update their servers ?
https://gyazo.com/3d06875508cb682dbe1d750646758d86 <@&818552355796287508> those errors normal ?
gportal is screwed
And their customer support is fast but a joke "the devs I are on it we don't know anything" essentially
I spoke with gtxgaming and pingperfect. The issue is on Isle devs side but they both got quickly a work around until it's patched
don't know what gportal is doing
thanks pouti much obliged !
can you share the workaround?
you think they will tell that to anyone ?
i dont know thats why I ask as a costumer
because me and others here are facing this issue
I am a gportal customer aswell until this afternoon if not resolved on their end. My point was gtxgaming will not share the "work around" that they found as it currently gives them a competitive advantage and they know it, obviously
Thanks but it will not be needed. I found the solution by myself.
The solution is already shared: #announcements message
It sure is, the owner got his money back thru paypal and made a server on gtxgaming meanwhile we set up a vps
That's not the so called work around for 3rd party hosters. They already have these values in the .ini file
Gportal sucks
Oh I gave them an ultimatum aswell. If they decide to keep my money I will revert the charges through mastercard for non rendered service. They have until this afternoon
To be fair I ran a 120/120 server with them on update 4 and the performances were flawless. So It would be a shame to just pull the plug over this
Fair enough. We are just glad we managed to get the server up and it works for everyone. Though its only temp, since we would want a vps set up
And customer service is usually fast
Our server crashed when we generated a couple tens of bodies 💀
when?
Before u5 was released
And we had thr server on gportal
We had some fights for fun, generated a couple tens of bodies, then the server ultimately crashed
this doesnt work for g portal
it doesn't work with them because its supposedly something on their end which they need to fix. But they are quite slow with that
We were thinking of getting one thru Vultr
indeed they are slow thanks for all the info btw 🙂
Yes and no, according even to gtx the devs screwed up something and they got a temporary solution while waiting on an actual fix
Ping perfect said the same
Aha. Well, we are glad as long as we got the server up and running for the month 🙂
with gportal? I'm pulling out the plug in 2.5h lol
Not with Gportal, we put up a server with GTXgaming
For the month
The server is running just fine currently, though he said its always possible to upgrade if it can't handle it
is your server showing up in the unoffical server list? Searching is still broken it seems
Any body having trouble having more than 100 slots on there server
We played a night of 120 players with some lag but pretty playable with max u0grades on gtx
About gportal
We fixed a few servers but are still testing if this works on all servers so unfortunately not fully fixed now.
So do you wish for a refund right now then i will do it
But i cant say if this works or how long it takes so just let us know when you cant wait anymore then we will refund you.```
thanks for info pouti !
Okay. Hi guys again. i setup the server with correct ini files etc - added my static public ipv4 as MultiHome and when the server starts there are no errors. I added all the ports (7777,7778, 27015-27017 as UDP and TCP) to my firewall. Ports are free on my provider. Can ping my server. Any ideas why i cant see the server in steam serverlist or ingame in the server list?
its windows server 2022
evrima
We use PingPerfect! Thank you!
Someone help me?
legacy for example works on that port and query when i configure to test
we all have that issue
just managed to fix this problem for myself
in your bat file, change your line to this:
start /wait C:\SteamCMD\steamapps\common\TheIsleDedicatedServer\TheIsleServer.exe ?IP=YOUR IP HERE?Port=7777?QueryPort=7778 -log | set /P "="
removing the multihome seemed to solve it ^^
what is the parameter "IP" used for?
MultiHome gives errors so assumed IP would be for a single IP
and avast, it worked, no errors and servers online and works
In my config file (TheIsle/Saved/Config/WindowsServer/Game.ini) i setup to use SQLite as Dabase:
DatabaseType=SQLite
DatabaseHost=127.0.0.1
DatabasePort=3306
DatabaseUser=root
DatabasePass=test
But it always creates a folder (\TheIsle\Saved\PlayerData) and not Databases.
Any ideas?
i think IP is not used?
works for me
can you remove IP=xxx and try again?
You can override the queue and rcon ports by these settings
bQueueEnabled=true (This will be changed to QueueEnabled in v0.9.85.83)
QueuePort=10001
[/Script/Engine.Game]
RconEnabled=true
RconPassword=Password
RconPort=8889 ```
in Game.ini
Check what I posted above, it should help.
any ideas here?
will there be mysql possability with the next patch?
any news on Gportal?
does pingperfect work?
Will that fix the ip issue?
Hey. im trying out a the isle discord bot.. but it needs player database folder.. is that possible with Evrima ?
Think legacy I'm not sure tbh
so not possible with Evrima ?
I added it and the server goes online but resets the Name and when i change the name server goes back offline
Alot of us.. Have an issue where our servers won't show in game or on steam server list any help?
Read the posts, it works with no issues, if you just do what they've written
i did and nothing is working
Lol just not just me....
If you don't host or struggle with it rather don't reply like that
I host myself, also made scripts and eggs that work completely fine.
Both for evrima and legacy i might add.
where do u host?
I'm glad yours work but like I said it not just mine that doesn't work so that's the point...
Does Pingperfect works?
Probably through someone and not on his own from scratch
I host through my own pterodactyl panel that i host on my own server
Then I'm happy for you.
Also several other users also use my eggs and works fine
So throw all the shit you'd like, but its nothing wrong with the server files or the setup. And keep this up, sure someone will help you out lmao
Does Pingperfect works? or not? xD
Dude I'm not arguing with you it's a server hosting channel if you don't have something to say that will help I'd prefer if you not to reply to my messages thank you.
I read earlier that they sorted a few servers out but still working on it so I'm not 100% sure
All I'm saying is look at the other 100 posts about this excact thing, setup a server from scratch with the new info, and if you want more help, post a log file..
Not sure if it's me or not but I keep getting this error setting up evrima server
No clue, I just followed the google doc tutorial in pins
ah
any idea how to make an evrima server ?
apologies for asking but wheres that
I'm pretty sure we do but you can always find out yourself by ordering a trial
Legacy and Evrima work from Enozi! Since mygameplatform.com also provides these free of charge for users
where is the engine ini ?
Should be in the config folder along with config.ini
Under "/TheIsle/Saved/Config/[Servertype]/engine.ini" where your dedicated server is installed.
Server type will either be LinuxServer or WindowsServer
oops wrong reply, sorry.
Np
Not 100% sure if they get generated after install or after first few boots
I checked all folders and theres no engine.ini
I did notice that the windows server has issues with getting the files there. Linux one has em apparently.
I dunno, and I dont think they're transferrable between Windows and Linux
then how do i make an evrima server bruh
The tutorial is outdated
i did, still getting same errors
the URL is that query port or game port ?
is there any tutorials to set up an evrima server that ISNT outdated, because this is frustrating.
day 2 of quoting this message until someone helps me with the legacy server
Why that weird startup command and not just the default?
wdym
I agree, I spent a lot of time figuring it out for both EVRIMA and Legacy, the documentation is poor. But I sorted it out eventually for the templates I was writing for AMP (a server management panel)
im trying to run a legacy sandbox deathmatch server, i'm pretty sure i did everything right, the command prompt window doesnt look sussy and yet the server is not showing up. any help please?
my batch file is
@echo off
cls
echo Protecting Isle server from crashes...
title Isle Server
:TheIsle
echo (%time%) Isle server started.
start /wait D:\TheIsleServer\TheIsleServer.exe /Game/TheIsle/Maps/Developer/DV_TestLevel?MaxPlayers=50?game=Sandbox?MultiHome=(censored)?Port=7777?QueryPort=7778?Listen?insecure?Mods= -log -NOSTEAM | set /P "="
echo (%time%) WARNING: Isle server crashed or closed, restarting in 15 seconds.
timeout /t 15
goto TheIsle
-listen
That marked part is way off the default one
This is the default start /wait C:\SteamCMD\steamapps\common\TheIsleDedicatedServer\TheIsleServer.exe MultiHome=your public ip address?Port=7777?QueryPort=7778 -log | set /P "="
hmmmmmmmmmmmmm
AMP, Is that Windows or Linux?
Oh mb il find the correct one, I'm on phone atm 😅 1 sec
start C:\TheIsleServer\TheIsleServer.exe /Game/TheIsle/Maps/Landscape3/Isle_V3?MultiHome=12.345.67.890?Port=7777?QueryPort=7778?MaxPlayers=100?game=Survival -log
That's the default one for legacy
Both. ofc Legacy servers only run on Windows, but EVRIMA runs on both
I've made legacy work on Linux ^^
Yeah, I’ve not got around to configuring Wine. Think it needs winetricks?
Cool, I will check it out. Might give me ideas xD
Just dm me if you want some help 👍
So im still facing the issue that my server is not listed in the server list. When i check open ports it says 8888 and 10000 are open but not 7777 and 7778 but i opened all ports TCP and UDP. Any Ideas?
but they are only open as long the server runs
does anyone know a good website to buy a unofficial server?
lucky you i port fowarded and on fire wall and still shows closed
Anyone that has GTX gaming knows how to allow others to view logs?
I have a friend hosting a server on GPortal but the server isn't showing up. Anyone know how to make it show up?
Make a support ticket
Gportal is still down.
Error: LoadMap: failed to Listen(/Game/TheIsle/Maps/TitleMap?closed)
anyone ever seen this issue?
ok port is open but not showing in serverlist
Same
i port fowarded and still get this error https://gyazo.com/81b67a323bdf617223c915e7e00fd851
Use parameters like this:
start /wait C:\SteamCMD\steamapps\common\TheIsleDedicatedServer\TheIsleServer.exe -MultiHome=xxx.xxx.xxx.xxx -Port=7777 -QueryPort=7778 -log | set /P "="
But I`d suggest to move Port & QueryPort (if still used from TheIsle???) to Engine.ini and remove from code
Engine.ini (TheIsle\Saved\Config\WindowsServer)
`[URL]
Port=7777
QueryPort=7778
[EpicOnlineServices]
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8`
If console start floating like a waterfall
-stop server
-change multihome ip to 127.0.0.1
start again and check if no errors
if no errors and not running crazy you can try by removing parameter multihome and start again for auto wire
Lmao
I migrated over to GTX, had my server up and running within 10 minutes. You can join their discord and bypass the support ticket system (to which they reply within minutes anyway) and talk directly with the support staff. I run my own Node.js discord bot on my server which allows me to do stuff like generating diagrams of gender & species distribution, heatmaps of recent activity, kill feed etc... My Node.js app had troubles connecting to the FTP and we troubleshooted it for like 3 hours together on discord. The guy went above and beyond. Now it's working fine again. Gportal basically told me "our guys are gone for the weekend, go f*** yourself... but politely"
Waaaat
Their interface is looks like crap however but I would define it as "functional"
Screw gportal
Yeah I’m super frustrated w Gportal.
if they refuse contest the transaction on paypal or directly with your credit card (depending on how you paid)
If they hesitate threaten to cancel the credit card lol
I have no prob w doing that😂😂 I’m just super pissed I got nothing but BS replies
They fully refunded my server without issues
The problem is the support staff has no idea what is happening
it's a call center
they devs are behind a glass window with a sign that says "Don't tap the window"
GTX I was actually talking directly with a developer
which speeds up the process and you don't get bullshit answers
Yeah this whole thing is stupid as hell
Well when big patch drops it's normal that some things temporarily go wrong
however I know for a fact that The Isle devs offered personal support to gportal devs and they refused
That should tell you enough
is it your selfmade bot? Im interested
Yes I'm a lead dev IRL, it's my pet project
Come check it out tonight at 7pm CET then 🙂
▬▬▬▬▬▬▬▬▬▬▬ JOIN PETITS PIEDS, OUR INTERNATIONAL LOW RULES EVRIMA SERVER ▬▬▬▬▬▬▬▬▬▬▬
⬇️ Déroulez pour trouver les crédits et les informations pratiques ⬇️
▬▬▬▬▬▬▬▬▬▬▬ REJOINDRE MON DISCORD CULTURE & MULTIGAMING : ▬▬▬▬▬▬▬▬▬▬▬
La chaîne a désormais son serveur discord ! Cependant, comme je ne veux pas passer mo...
Hopefully it will hold up to 5.0 server logs. I didn't have to occasion to test as much since it happened very fast
and I got it working with v5.0 again last night
But I'm confident
We expect a lot of people as soon as it come online, for update 4 we did 120/120 everyone starting as a baby at the same time. Crazy fun! Also a bloodbath
is there anyone knowing whats causing the negative ping? on my server on the overview of the game servers it shows a ping of -1000 😂
I meant gportal who told me to go to hell not gtx 😅
i understood lol!
Well looks like I'm getting an affiliate link soon with them 😂
Let me know if you want 10% off when you order your server
See the second pin in this channel
tysm!
hello, how can i fix this problem:
See #announcements
?
is there are guide how to host a evrima server?
Best you will get is in the pin
which one?
The one which links a guide for setting up an EVRIMA server lol
Try the command line approach then: #server-hosting message
server runs but i cannot find it under steam servers
My server is running but I can not get on it
https://gyazo.com/91dc182f8e44fbcfcec594ad559d20c8
Does anyone know what this can be ? Server runs and when connecting I fly out again and in the console comes then
https://gyazo.com/8d678b75362f036bbc112a4d8a1a1906
how can In set the servers discord link?
Oh oky I understand
and the ingame search is broken
Hi
Does anyone know what could be the problem ?
There are no problem it's normal
Rcon works, what ports do you use
All this warning means is that you haven't authenticated with a password yet, have you done that ?
Yes I have do
I used the site "Online RCON console for game servers" the connection works but I still have this warning
Never used that site so not sure if that works or not
I make the command like "get player list" and I have a warning"Malformed Rcon api response"
This issue is you are missing the engine.ini next to the game.ini in the "windowserver" folder. I can send you my engine.ini if you'd like
Im having the same issue, if you wouldn't mind haha
So if you followed that google doc to make your server, here are the additional steps you need to make.
step 1: Make an "engine.ini" in the windowserver folder next to your "game.ini"
step 2: add these two lines at the very bottom of your Server_Start.bat (under where it says "goto TheIsle"
-ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
-ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
Thats what fixed it for me.
@dense sonnet @fleet horizon
ty lol
Hello, where can I find the guide to create an evrima server?
Is it possible to increase the AI spawning on unofficial servers? If so how would I go about doing it?
pinned messages
ty
my server starts but when i try to login it crashes
cant join from the same ip its hosted at
how to save data into sqlite db?
?
I can't find my pingperfect server on evirma not seeing it
you cannot
gotta ask ping perfect about that honestly 😄
no
Anyone want to help me with opening our ICMP port for our ping correction? Not to sure how to do that.
Is there a way to store players in mysql database and not in json?
It’s not a port as such, it is just allowing ICMPv4 message type 8 (echo request) inbound
Ahh thank you. We'll check on that!
Was there a new patch deployed to help with ping issues or is it just on officials yet?
Hello,
I am developing an API for managing my evrima server with the RCON protocol, except that it is not possible for me to authenticate myself. I am using nodejs rcon-srcds package. Has anyone here ever used rcon with an existing package?
Thank you in advance for your answers.
i hope they add some functions to work with the dino of a player itself
You need to send the packages as actual hex code or it won't work
Ok, so I will create my own package for the RCON connection
Data recovery by Query is no longer functional?
Ok, thanks, I will make my own package for this
Same for me
Yes
guys so got my server to work eventually but there is showing 2 instances of it while i only have 1 running https://gyazo.com/f59c25a36a7df02c54a8040167f049b5
when i enter https://gyazo.com/ea1a161080485a7ee3b49d8571fc28a6 ?
What kind of mods? I'd love to increase the AI spawning on my server
I'm trying to self host a server since a while but I can't get it to work, I'm getting my console keeps rolling with these two errors particularly
LogNet: Error: UEngine::BroadcastNetworkFailure: FailureType = NetDriverListenFailure, ErrorString = , Driver = GameNetDriver EOSNetDriver_2147036737
LogNet: Error: LoadMap: failed to Listen(/Game/TheIsle/Maps/TitleMap?closed)
It won't start, can't see it in lan and neither on steam server list, I port forwarded correctly and followed the addition of the lines in Engine.ini and the start server batch file
For Evrima can someone give me a rundown on A-AI and S-AI. I'm assuming A is active AI within render distance of players, then S-AI that is not rendered?
Hi! can someone give me the working link for set up the server for evrima? the actual in the steam discussion gives me an error
Can someone send me something for a server set up? Or something that can get me through the basics? Tried looking and every link I tried was no longer available.
What cpu and ram specs are doing well with hosting?
EVRIMA Server Hosting Guide Made by NoClipSize. First download SteamCMD: https://developer.valvesoftware.com/wiki/SteamCMD Extract the .zip file to the location where you want your server stored. Mine is in a folder I created, named ‘SteamCMD’. Launch SteamCMD and let it update itself. Once...
I use the i5-2400 and 4x 4GB DDR3 1600MHz RAM, and it works just fine for me.
I'm using pretty old RAM tho.
I did it on Legacy
and it couldn't stress test it, how many Hosts I can use without lags
I was worried my dual x5650 machine wouldn't be enough
Sounds like it might work well
evrima and legacy are supported here
any news from g portal, my server still aint showing up
unfortunately as I mentioned it doesn't work even if I added these two lines to the engine.ini for some reason
not sure about the ports either, I am quite used to port forward for servers
may i interrupt 👀
i got a server by gportal. but since the update i cant find my server anymore. autoupdates are on 😮
make a ticket at gportal, its a issue they have to fix
You've also added it in the startup command?
yup
what does your startup command look like
let me copy paste it
@echo off
cls
goto TheIsle
:TheIsle
echo (%time%) Checking For Updates and Starting Server
start /wait C:\steamcmd\steamcmd.exe +login anonymous +force_install_dir C:\steamcmd\steamapps\common\TheIsleDedicatedServer +app_update 412680 -beta evrima +quit
echo (%time%) Server Started
start /wait C:\steamcmd\steamapps\common\TheIsleDedicatedServer\TheIsleServer.exe -log | set /P "="
echo (%time%) WARNING: isle server closed or crashed, restarting in 5 seconds.
timeout /t 5
goto TheIsle
-ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
-ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
yeah thats not right
cls
goto TheIsle
:TheIsle
echo (%time%) Checking For Updates and Starting Server
start /wait C:\steamcmd\steamcmd.exe +login anonymous +force_install_dir C:\steamcmd\steamapps\common\TheIsleDedicatedServer +app_update 412680 -beta evrima +quit
echo (%time%) Server Started
start /wait C:\steamcmd\steamapps\common\TheIsleDedicatedServer\TheIsleServer.exe -log -ini:Engine:[EpicOnlineServices]:DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
-ini:Engine:[EpicOnlineServices]:DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8 | set /P "="
echo (%time%) WARNING: isle server closed or crashed, restarting in 5 seconds.
timeout /t 5
goto TheIsle```
try with that
still rolling
i assume you removed ip and port, but that should ofc also be in the script, at least the -Port
still not working ?
Just doesnt show up in serverlist or ?
Anyone find a resolution yet of not being able to connect to a Evrima server on a LAN? People can connect from the internet but local machines on the local area network can not connect to the server.
I tried to connect to bothe the LAN IP and the external IP neither connect. It worked fine before the patch.
the console keeps rolling, I can't find the server on steam and in the lan tab either
dm me your full startup command
Please help me, I get this
anyone else can't teleport with spectator mode?
hello friend, I ran into the same problem when starting the server, please tell me have you solved it?
Hello,
Data recovery by Query is no longer functional (evrima)?
Query no longer works no as they use EOS now
Ok, and how do we configure it?
unfortunately, not yet, still investigating thx to the help of Enozi
hello i rented a server from gportal but it doesnt show up in the unofficial list can someone help?
contact gportal, they have some issues with the latest update
thank you
Oh boy theyre not answering for now i guess is there another better way to rent a server?
anyone who runs an actual full server also runs into big issues with ping and the only solution is restarting?
I didn't have this issue with update 4 when running a 120/120 server
now after a few hours it usually starts going down the drain ping wise
Edit your engine.ini to say the following, at the bottom of the file:
[URL]
Port=7779
QueryPort=7777
[EpicOnlineServices]
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
Change the port numbers to your preference.
Almost forgot. Lose the port commands in your commandline for the server. With this your commandline can be '-log' and that's it.
Is there a special RCON lib I need to use? I'm using this https://github.com/coNQP/rcon python shell but I am getting authentication error specifically "Unauthenticated RCON connection tried sending commands". The port has been configured in game.ini [/Script/Engine.Game] and port forward correctly.
Do you authenticate?
It doesn't show up in the log establishing any connection so I would assume I am not.
Well, you gotta authenticate first, then you can send commands
Ok and when I first connect I use the rcon port? Or what is the query port? Is that different from the one specified in command line ex 7778 port for the server.
alright so I how do I authenticate? in the shell its asking for host, port, and password. Under assumption that would authenticate like ssh or telnet or w.e
n/m let me try you look into the python script! I might need to edit that before running the shell.
idk i wrote my own rcon tool into my discord bot
Bro, I adore you, thank you for your help, but could you help with another mistake?😊
Yup.
Yeah I've tried multiple rcon clients and it doesn't authenticate. So either the way the script is written in these clients are incompatible. Is rcon handshaking authentication that different from client to client? It would be great if someone in the community could share whatever rcon client there using that we could grab from github or w.e I've done a search on this discord and google and there is not much I could find! I though rcon was pretty standard. I have the correct ports because it shows its connecting.
I spent about 3 days with trial and error, but i ended up just integrating it into my discord bot. It's hex based so you need to send hex to the client through the rcon port. Password also has to be converted into hex, as well as any other messages or such you want to send
Oh wow didn't know the password had to be "hex". That's probably why on the auth issues! Thanks!
Can anyone explain the magic that happens with the RAM the server is using?
I am attaching screenshots of two different servers. On the first the use of RAM (green line) has dropped to 3 GB and ping is stable, on the second it's vice versa.
if i got time the next few days, i can rewrite the bot a tiny bit and make it public
i'll pm you
Whole 5 gbs? And why it's only with the first server?
Anyone know what this means?
I noticed the exact same thing on my server when everything starts lagging out
we play between 100 and 120 players
usually it runs smooth for like 1-2 hours
then it turns to crap
until a restart happens
Lags.
What do you mean? So it just means the server is spiking it's not the reason for the spike?
Yeah.
Could being in admin mode affect that?
Can't connect to a server hosted off your local network. I got around this by connecting to a VPN
(I have a separate computer for hosting stuff)
We did notice that when going into admin mode the ping really jump
And lowers back when exiting
Talking like 100+ ping while in admin mode on a server with 120 players
@versed bay saw the same thing on his server
Yeah
True, but you could use Steams Favorite Server list from within the Games Menu to connect to a internal IP address. Now that the game no longer uses Steam, and Steam can no longer connect to the internal IP you can no longer connect to a server on a LAN IP address. There has to be some kind of fix to let people on the same network as the server connect to the server.
it happens when a player spawns but there is a problem when he spawns, but he recovers right after, it must be for the devs
someone knows how i can make my server show up am hosting gportal?
and i got the code actually it should be fine right?
Hello, I am trying to bring up a Evrima server and the server shows that its already up but I'm trying to join and the server isn't showing up on the server list as well as steam direct connection just pops up a separate window from steam, I would honestly appreciate any help or advice!
same, I need help as well!
I'm trying to host too. It says it can't serialize my ip with port stuff. It launches the map though
Yea, I finally got it to work!
What did you do to fix it?
I deleted the one I had, added a new server which was made for Evrima, and then I basicallyed added the blue box highlighted in in engine ini and then repaired so it can restart the server, waited like 5 minutes, and then restarted it, and then it worked! just gotta rename and add ur admins
What folder is the engine.ini file in?
go to the configuration files and then click the "select file" which will show you motd, engine and game. You want to go into the engine.ini
Are you hosting this on your own machine or a server hosting service?
G portal o: so maybe its DIFFERENT, so I assumed because you answered me D:
It's only different because I have to dig through file folders where G portal probably streamlines it for the users
yea, then Im no help, sorry! someone here might hopefully come to your aid!
No you're all good. You did help a bit
@last owl Is there any more stuff in your Engine.ini file or is that it?
it will show you either 1 or 2 ports
What do you mean?
for us, it shows us 2 ports
I am not quite sure what you are trying to say here. Is there a way for a local machine on the local network to connect or isn't there? I understand there needs to be a way to input the local IP directly to be able to connect. But I know of no way in The Isle Evirma to do this currently.
why my screen go black every time i try to host?
Many greetings! I've encountered a problem setting up an Evrima server: The infinite scrolling log. Naturally I've tried all the different launch options I've seen posted here, but not much has changed. It says something about network failure which Google has not been very helpful in teaching me about. Any assistance would be appreciated!
Thanks. So not command line I am guessing? And is the QueryPort still a thing? I never see the server listening on that port with netstat
Made a new .bat that to me looks exactly like the old one, difference being this one works better. Anyway; Next hurdle.
Any big thonk to share?
After update 5
my server almost never appears in the list.
what was done in this update to look like this?
right now my server is on, and it doesn't appear in the list.
Has anyone here managed to connect via RCON an node.js app (or an other app) and has a functional example of how to format the expected payload on the server end once the connection is established? I'm running into issues trying to send a buffer with my RCON password
would be appreciated
i will want know that too
can you help with that too?
maybe i can help too
I'm asking because I'm not too sure
Would have been great an example or two of write calls
humm
Have had the same issue, all I've seen so far from people is that the password and that needs be be sent in hex format, but I've been getting nowhere with it
yeah I wish they would have like one implementation example
been reading a bit more about TCP packets
might have an idea but I'm lazy now I'l try again later or tomorrow
only the password?
I tried the whole string
but it won't work
I know you need to send a buffer if you're using node.js
From what someone said the other day its everything including the password, if you search for rcon you can see what people have said about it, I'm going to try and look into it again tonight and see if I can get anywhere
If I manage to get anywhere with it I'll let you know
my RCON is not working 😦
whenever I try to connect this message appears.
ip, ports and password are correct.
me too
I know @golden flare has as solution but he sits on it like a throne lol
I'l figure it out
you got this right?
https://docs.google.com/document/d/1JI_qVdKIZrqcVTY2Tqnm1T_Ws3_1r5nINGxfprbWw7w/edit#heading=h.p9tfb89b07jd
what do you use to connnect to your server?
RustAdmin (RECON Admin)
😄
which means it detected my command
😐
when I get it working i'l post the solution here
ok
I don't think I'm far from it
hey
I have an idea, since you are making your own app, try to send the information to RCOn using json
it's TCP it needs a buffer
json work on web response too
well well well, I recognize this bit of code
RCONAuthenticationError – if authentication failed, either due to being banned or providing the wrong password.
where am i going wrong?
the password can have @ # $ % ???
I give up, nothing works for me.
if anyone can do this, please tag me.
Got it thanks to @merry urchin input
const net = require('net');
const client = new net.Socket();
client.connect({ port: YourPort, host: YourHost }, () => {
console.log('TCP connection established with the server');
const packetMainLength = 2; // fixed overhead of packet without payload (Accounts command + emtpy null byte at the end
const password = 'youRconPassword'; // string
let utf8Encode = new TextEncoder();
const encoded = utf8Encode.encode(password);
const packetLength = packetMainLength + encoded.length;
const buffer = Buffer.alloc(packetLength, 0);
// Command to execute
buffer[0] = 0x01;
for (let i = 1; i <= encoded.length; i += 1) {
buffer[i] = encoded[i - 1];
}
buffer[buffer.length] = 0x00;
client.write(buffer);
});
you can apply the same logic for other commands by incrementing the packaMainLength by one
what module are you using for "client" if you dont mind me asking?
sorry my bad
net module from Node.js
corrected it
this should work
I managed to connect and authenticate my TCP session
Thanks, your a legend 👍
As usual it didn't work for me. I must be cursed.
😢
where it says utf8Encode.encode(payload) change payload to password
it will work
wops
I thought at first ping was fixed, but daaaamn, far from fixed
It's the only throne i have 😄
except it wasn't your solution 😅
not at all xD
please tell me, will it work to start the server and log on to it from your PC?
you want someone to try to log onto your server?
I'd like to come in first
im confused
yeah sorry i have no clue, thought you needed to see if someone could join your server
i dont know how to help with that error, havent even got my own server to work yet
im having this error and my server wont appear on the unofficial list
[2022.07.19-21.23.09:817][ 0]LogLoad: Error: Failed to enter /Engine/Maps/Entry: Servers can't open network URLs. Please check the log for errors.
[2022.07.19-21.23.09:817][ 0]LogLoad: LoadMap: /Engine/Maps/Entry?Name=Player
I can help you
ah ok, how do you fix it?
в файле engine.ini
[URL]
Port=7777
QueryPort=7778
[EpicOnlineServices]
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
the ports can be yours
alr lemme see
i still get the same error and everytime i start the server it deletes the port=, and isint it supposed to be PeerPort or am i thinking of something else
maybe somethings wrong with the server itself, i only have some of the stuff in your engine.ini ima reinstall and try a few things
in the main bat file, do not specify the port and ip
i got it to work
nice
have you started the server?
yes and i am able to join
And I can't get in
to your server?
yea
whats the name?
I deleted it, I'll start over
alr
do you start the server and log in to it from one PC?
yes
ok thx bro
np lmk if you want me to try and join yours
No, that's all I wanted to know
alr
I've also got this issue with connection time out, nobody can get into the server even though it's running
<@&505047238674874368> having an absolute blast playing your game. Any chance you peeps could start up some more official servers?
Please only use this channel for help and guidance on hosting an unofficial server for The Isle
can you tell me how the engine.ini file should appear in the WindowsServer folder??? Last time it wasn't there, but it appeared, now it's gone again 😮
In the instructions of the EVRIMA Server Hosting Manual, there is not a word about the engine.ini file at all
🤯
can anyone tell me the link on how to make a dedicated server i almost have the computer built for it and need more info
never mind i found the guide 🤓
Anybody here?
what
Why can't I find any servers today
question what are the system rqwirments for server hosting
no like what kinda pc do i need to run a server well
I used to be able to search all the servers, but since the version update, I can't search any servers anymore
So I am in all servers of the dragon now I can not play, I am very sad 😦
<@&505047238674874368>
is 16 gigs of ram enougf to run a server
ah makes sense
You will need to kill the connection & open a new one on every calls and have a logic to check wether or not you have a valid authentication by sending a test call
It's pretty dodgy... but it works. The socket won't accept more than one call...
that's not how a socket is supposed to work 😅
Hope they will improve upon it
Otherwise they can just give an http REST api to their server at this point...
would be cleaner
I don't understand java_script_ so much, I was happy that the connection worked, but I don't know how to use it.
The language I know is Python, I tried every way here and I couldn't get it to work.
Always giving the same answer (erro): unauthorized authentication.
if you or anyone else knows how to do this in Python, please let me know.
it's javascript
👍
What? you just authenticate one time when server boots up and then you can send as many commands as you want until the server restarts again
Not according to my tests and I validated with amarok and he said the connection needs to be opened again on every calls. If you send more buffers into the same stream it just stops responding
You don't need to try Python. I tested it myself and it did not work
Well yeah, but you only authenticate one time ?
Per server sessions yes, except my app is also running 24/7 and has no idea wether or not it still has a valid session
If the server restarts and my app thinks it's still authenticated and it's not anymore I send packets to check the response
and authenticate or not depending on what I get
You can solve that by parsing the log and use if not statement
i got a event that parse the log every minute and if the successful authentication is not present it will send the authentication call
I don't see why sending one packet to check the status is any better or worse
than parsing the logs for it
idk, just thought it was cleaner
I disagree
Having played a lot in the server logs so far, it's unreliable
sending one packet and checking what you get gives you the exact status of your connection on the spot
And the server closes the connection when it declines something, so you can almost safely assume that you don't have a valid session if the server ends the connection on its end
Maybe, been working great for me and the other servers that have been using it since update 4
What ever works for you
it's not like there's only one solution
I wouldn't go that way
that doesn't mean that it doesn't work
nah i mean, you could just have it authenticate at each command, its not a issue either
That would not work
I tried that
It does work
if I remember correctly it stopped responding after to RCON after you tried to revalidate a session
And also you're sending 2 calls on every single calls, meh
just said it was possible 😄
is there a way to request to be able to make a server???
you had weird behaviours in regard to rcon password?
I change it in the game.ini file and it stops being recognized
I have like this one password that actually goes trough
Not really, i can put whatever and it goes through
here ?
[/Script/Engine.Game]
RconEnabled=true
RconPassword=password
RconPort=7676
Yeah
Mygameplatform.com installs it for you via the website and server name and so you have to do it yourself.
Does anyone know if logic servers works with envrima branch? It does not mention it anywhere on their website. I need a new host because G-portal is broken, and they sold me the server anyways.
@burnt berry
Hello

Hello,
what can cause, that a my server is no longer visible in the server list?
I get this error when trying to launch my evrima server and I've got no clue what could cause the issue
LogNet: Error: UEngine::BroadcastNetworkFailure: FailureType = NetDriverListenFailure, ErrorString = , Driver = GameNetDriver EOSNetDriver_2147478387
Here's what I tried:
1)Changing my DNS
2)Making sure I put the right IP
3) Port forwarded the ports (firewall & router)
7777-7778 TCP
27015-27017 UDP
7777-7778 UDP```
4)Tried swapping from my public IP to my WLAN IP
Any Ideas on where the problem might be are welcome! Thanks.
How do I create a server in Evrima?
same error
EVRIMA Server Hosting Guide Made by NoClipSize. First download SteamCMD: https://developer.valvesoftware.com/wiki/SteamCMD Extract the .zip file to the location where you want your server stored. Mine is in a folder I created, named ‘SteamCMD’. Launch SteamCMD and let it update itself. Once...
Thanks!
can you remind me where's that?
yes
I've added DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
but same stuff
iam trying to connect eu server, and when 92\100 they write me server is full
Hi can someone assist to unstuck a friend GER/ENG Die Insel server?
try to host 2 hours
nothing to do with the section #server-hosting contact the admins of the unofficial server.
k thx
same thing, nothing to do with #server-hosting, keep trying
how do u do that tho
join their discord server, use google to find it or look in#unofficial-isle-communities
what should I have added
what example #announcements have everything there, and only announcement referring to what you're saying is that one
If anyone else could help me, I'd appreciate it #server-hosting message
Just copy and paste this into your engine.ini at the bottom. You need the tag in the brackets for it to work. This wasn't explained well in the announcement unless you looked closely at the image.```
[EpicOnlineServices]
DedicatedServerClientId=xyza7891gk5PRo3J7G9puCJGFJjmEguW
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8
However if you're trying to join your server and are timing out and you're hosting it locally, currently there's no way to join your server unless your router supports NAT loopback or hairpinning since we can't connect to our local IP's anymore with the loss of the favorites from Steam. You're stuck with me and a few others if that's your case
Yep, I think I was missing the first line
thanks a lot @violet marsh
It said it's online, imma check
@violet marsh got any idea why this is happening? Is that what you mentioned above?
I don't think so, all of my timeouts were 120 seconds not 20. You might search the channel I know it's been a common problem but I'm sure there's a solution somewhere
Is there an updated video tutorial on how to host the evrima map?
#server-hosting message
Couldn't find anything on how to change the tick, if anyone got any information please ping me, I would appreciate that.
So it's a bug that you can't play on the same machine your server is hosted or is that intentional
well that sucks anyway
What if youd host in a vitrual machine? Will that make a difference?
Right
There's an isle community I'm part of. I forget, was there a way in Evrima to give someone a specific permission or was that just in my mind?
(Since I do content on their server, they might want to give me just spectator like they did on their POT server, they run one of each)
I'm getting the timeout message too, playing from a separate machine and nobody else can get in either
Has a dev given a formal answer to this? If not, could we get one?
I haven't seen anything about it, seen mentions of it in here but not any solutions unfortunately
Hello,
How can I destroy the rcon session?
I use net of nodejs
so i been trying to put up a server on Gportal and it says its active but not showing up at all! idk if maybe i missed a step or what ? anyone got any idea on how to fix this?
same issue here, some hosts like pingperfect found a workaround the devs incopetence, Gportal aint one of them.
it only says for the isle legacy
Bumping this in case anyone has an idea
what do you say about starting a 200 slot server together?
They still haven't fixed that?!
omg
so basically isle servers isnt that optimized yet to support 200 players
would be awesome tho if the official server could ahve 300 to 400 slots but maybe that is impossible
would be cool tho
thank you! ^^
Hey guys I need some help, I am trying to set up an Evrima server but everytime I run my batch file I get this and it makes this error over and over again...
You need to add this to your engine.ini file so your server starts properly.
DedicatedServerClientSecret=pKWl6t5i9NJK8gTpVlAxzENZ65P8hYzodV8Dqe5Rlc8```
Under the heading [EpicOnlineServices]
I am following the guide that was posted recently and I followed all the steps but at step 9 when I start the batch file that happens, also I see no engine.ini anywhere
You can also set on the command line. See the pins
Okay done that and it is installing I guess? Is this supposed to happen cause there are a few warning that look concerning
anyone that has a fix for this error?
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
also i need to know what the icpm port it and how to utalze it