and remove the base_url under http: config
#add-ons-archived
sly kindle
wind trench
Ok shall try that cheers
It's strange. I removed base_url in config.ymal and set both the external and internal URL to HTTPS in general but when I log in locally it redirects to http and then the connection is reset.
I did a reset of course
Right seems to be working now. I think my old shortcut was the issue.
Thank you very much for your help @sly kindle
junior cave
Hi i have a portainer addon, but when i pull any image, the download timeouts after 5minutes with generic error unable to pull the image. Logs are empty even on trace mode, running on VM, any idea what is happening ?
sly kindle
@junior cave free space available?
The images for VMs are around 6GB. Did you allocate more?
hot glacier
hello i have the home ssistant addon setuped and configured in the google home app it only adds devices like hue tp link and more but not the services like turning off computer and more
junior cave
@sly kindle i have allocated 32 gigs
hot glacier
is there a fix for that ?
hot glacier
?
hot glacier
not ?
dense spadeBOT
frosty pasture
"type": "urn:ietf:params:acme:error:rejectedIdentifier",
"detail": "Error creating new order :: Domain name needs at least one dot",
"status": 400,
"identifier": {
"type": "dns",
"value": "e"
junior cave
@sly kindle other addons are installed correcty and are visible in portainer as images, but unable to pull them itself, so the space shouldnt be a problem 🤔
cyan prawn
For some reason my samba connections on my windows 10 machine just stopped working., Lost my mapped drive and can not remap. Can ping, tracert, ssh, etc. Just Samba not working. Tried uninstall, reinstall no difference. Any ideas
Must have been something changed on the latest windows update. No sure what. My tablet and phone connect fine so Samba is working, just not on my windows 10 machine.
cunning wolf
If you've confirmed that the addon is working as expected with multiple other devices, it's not the addon.
🤷♂️
You could try clearing the credentials Windows has saved for that connection: https://superuser.com/questions/1069475/clear-out-windows-10-network-credentials-without-rebooting
Not sure what else it could be... if it's not that, you're probably going on a long journey through Google today.
cyan prawn
I did a long journey before I posted. I also clear out the credentials. Rebooted and no luck. I'm sure MS changed something. It is what, and how to fix that I am stumped on.
Also, just because an add on works with multiple devices does not mean that all the protocols are being handled correctly. I'll try I a different windows 10 machine and see if it works.
cunning wolf
I mean... it works for almost everyone else and it works for your other devices. Seems incredibly unlikely that it's the addon which is to blame.
cyan prawn
Fails on another windows 10 machine
cunning wolf
Which addon at which version?
cyan prawn
I am not saying it is the addon, I am saying it could be. There are many others with windows 10 issues and the addon 9.2.0
cunning wolf
And there are many more without issues. That doesn't mean it's the addon either.
What's your config for the addon look like?
dense spadeBOT
cunning wolf
And the PCs that can't access it all have workgroup '1'?
cyan prawn
They do
They also see other NAS drives on the same 1 workgroup
tracert and ping work fine to the address
It was working yesterday. Some windows update caused a reboot. Stopped working
cunning wolf
Except for your map and the subnet masks, mine's identical and works with Windows 10 v1903.
I still think you're looking in the wrong place, to be totally honest. If it stopped when something changed in Windows, the problem isn't the addon.
cyan prawn
I'm on the same version
cunning wolf
Maybe the developer of the addon will need to update something to patch whatever MS broke but that's not the same as the addon being broken.
If it's not already reported, log an issue. Otherwise, I think you're on your own.
cyan prawn
Again, I'm not sure the add on is broke, I said just because other devices work doesn't mean the add on is working correctly.
I'll log an issue. I have seen Samba add on causing issues for others. Also, when I upgraded from my pi3 to pi4 I reinstalled and it took me a while to get samba working on W10. Windows discovery never saw it but it did in my pi 3
cunning wolf
Wait... you're relying on discovery? What happens if you just access the SMB share directly? i.e. \\192.168.0.10\config
Mapped drives 🤢
UNC all the way.
cyan prawn
You misunderstood what I was saying, or I said it wrong. Windows discovery worked on my Pi3. It never worked on my Pi4. The map \\192.168.1.48\config fails
network path not found
pseudo fox
I am trying to install DOODS in HassIO. running command docker run -it -p 8080:8080 snowzach/doods:latest seem to download the docker and run it fine. However I cannot seem to connect to it from port 8080. Any idea?
http://192.168.1.4:8080/ gives me not found
gritty citrus
anyone using Grocy addon for HA?
In the grocy addon when i add product or item to my list i get a error404, i have tired reinstalling and changing the ssl to true and false but no luck, am i missing anything extra to be installed? I have looked at the github page to check for extra requirements and i cant find anything.
https://pastebin.com/Tx7ehYSE
timber idol
Guys, how can we update the Unifi AP from 5.12.72 to 5.13.29 ? The Unifi Controller Addon, dosen't make the update. So can we manually update ?
crisp tinsel
So, ha_os has plex as an available addon, for plex to be used in it's primary form, you need the ability to add files into it, ha_os is heavily locked down to prevent you from mounting things into the vm or otherwise getting access to the file system. How are you supposed to load media into the very obviously supported addon?
cunning wolf
You can place stuff into a suitable subdirectory of share/ if you want an addon to see it.
crisp tinsel
Hrm.
cunning wolf
I'm not sure you actually want to run Plex within HA though. Either you're on a Pi, in which case it's way underpowered... or you're not on a Pi, and there are better options.
crisp tinsel
Yeah, I'm using VMs.
I'm giving HA 8gig and 4 cores, because that's what I have laying around.
cunning wolf
And if you have VMs, why put Plex within HA?
crisp tinsel
Mostly because it seemed like it would keep other things simple, and I had the thought line "If it's a supported addon, then there must be a logical and reasonable way to use it"
cunning wolf
Naw. Single responsibility all the way.
crisp tinsel
Fair enough, that answers what I needed, appreciate it.
As a quick aside; you seem reasonably knowledgeable with plex; since I'm going to throw it on it's own VM, does it have a distro it favors running on itself?
cunning wolf
I know very little about Plex 😄 I guess it depends on if you want to run it on a headless distro or not. But that's probably a question for #the-water-cooler, since it's not HA related. See what people there have to say about it.
crisp tinsel
Ah, ok. THanks. I'll just toss it on Ubuntu and hook it up. Thanks.
knotty kraken
Are 3rd party add-ons still an option? I don't see the add by url anymore
cunning wolf
Top right corner 😉
craggy goblet
Hi, i am running the deconz official addon, but can not reach the vnc part for detailed infos. it does not find it (vnc_password set). open web ui is working and most of the zigbee things too, but i cannot add a specific sensor and am currently checking why.
cunning wolf
#zigbee-archived , FFKangoroo 🙂
craggy goblet
thank you 🙂
remote ether
Hi everyone.
Using a pi3 with HASS image and a Linux laptop. I'm trying to figure out a way to get the Wireguard QR on my laptop so I can connect to my mobile device.
Any recommendations?
weary stratus
vnc?
remote ether
vnc?
@weary stratus vnc?
weary stratus
lol..forget what I said..was thinking about something else
but why do you need the qr code on your laptop? You can just copy the config, no?
remote ether
I can't copy anything in the ssh window for some reason
-_-
Maybe I'm overthinking it. I'm used to using Ctrl shift C to copy lol
sly kindle
you scan the QR with your mobile device. What do you need to copy?
bitter geyser
@raven tinsel i believe you've created the wireguard add-on for hassio.. i'm just wondering how i'm able to get access to port 8123 through the tunnel. i see the tunnel is up and running, but only port 80 is exposed and that is a status page for wireguard
weary stratus
you need to forward a port from your router
in config page
you can set which port..default is 51820
once you are connected over WG you are inside the net that you configure in WG server
so then you can access e.g. homeassistant:8123
as youare in same lan
bitter geyser
in my router? but the router is not involved here.. the wireguard interface is created on the ha device
wireguard in ha is set up to establish an outgoing connection.. not for clients to connect to
weary stratus
uhm.. Option: server.host
This configuration option is the hostname that your clients will use to connect to your WireGuard add-on
sure, I guess you could use the add-on as a client as well..
the add-on is mostly used as a WG server that you can connect to with your devices, like a vpn
bitter geyser
yup, i realize that.. but i already have a wg server and i want to connect the remote ha instance to that
raven tinsel
@bitter geyser that won’t work with the addon
bitter geyser
Is there a technical limitation?
raven tinsel
Yes, it runs inside an isolated container and traffic is routed out
while it connects as a client, there is nothing routing towards the isolated container
so you can't use it as a client for that reason
hot glacier
is ther a adddon to control other things then hue with a hue remote
i think i found something
bitter geyser
aha
olive geyser
Two questions: 1) why is a docker subet being banned when actual ip should be passed through when using 'NGINX Home Assistant SSL proxy' and 2) why if I have it listed as trusted proxy is it getting banned in the first place? https://hastebin.com/ewivasupuh.cpp
fluid dove
I have a unique concept, looking for ideas and direction on how to implement. I have 3 separate physical machines:
- Plex Server on Win 2019 Server
- Sonarr and Radarr (to download stuff for Plex) on Win 10 Pro
- HA (Including InfluxDB Add-On, and Grafana Add-On) running on Ubuntu 18.04.
I am looking to get Plex/Sonarr/Radarr data into the Grafana Add-On in HA, such as CPU/RAM Load, Download Speeds, Amount of Data Downloaded, etc.
Currently have InfluxDB and Grafana set up for data from HA directly (temps, speedtest, etc). But struggling to get Data from Plex to InfluxDB to then pass to Grafana. I did some research with this, found Varken (https://github.com/Boerderij/Varken) but am struggling because Influx and Grafana are inside of HA, and I have data coming from multiple devices. Ideas?
Also found this in one of the threads on https://community.home-assistant.io/, in regards to the Plex Add-On Functionality:
@sterile meadow
I think they were expecting a hassio integration for an existing Plex Media Server so you could control your Plex server through hassio,
@raven tinsel
In that case… keep watching the forums or my Twitter… you might be surprised… soon… 😉
Was this ever a thing? Controlling a different Plex Server in HA? If so, that could be my answer because it should get the Plex data I am looking for at least into HA
Granted, 
was on a post from 2018, but nonetheless
weary stratus
use tautulli for all the plex data galore 😉
cyan prawn
I lost my samba connection after a resent windows 10 update. In the Samba logs I get Denied connection from 192.168.1.5 (192.168.1.5) Connection denied from ipv4:192.168.1.5:60595 to ipv4:192.168.1.48:445
Does this mean anything to anyone? How do I fix it
sly kindle
Did you have the credentials saved in windows?
cyan prawn
I deleted them. And tried to re add and it fails
sharp oriole
Hi, I just installed the HomaticCCU-Addon and paired my devices. Now I want to make a backup within the CCU, but I just get an error message:
"An internal error was detected in the service software. The diagnostics are being emailed to the service system administrator (root)."
Is this normal? How can I make a backup?
true bough
how do i pull down or git clone into the add-on repos?
more specifically, https://github.com/alex3305/hassio-addons/tree/master/traefik
it just says go to add on store
add this new repo
click install
wait wait
modern hound
Node-Red integration seems to be completely broken for me. It looks useful and I really wish it worked. I've tried unistalling and reinstalling however I have the same challenge and even though I have the integration pluggin installed I still get told I need it all the time. I have to input the server details into every homeassistant node 🙂 Should I just bin this and start working on YAML or is there something obvious I'm missing.
sly kindle
The custom integration?
cyan prawn
Any ideas on how to get my windows 10 machine working again with Samba? Something changed in windows (I don't know what) and I can no longer use my PC to read files on my Home Assistant
modern hound
@sly kindle, yep. I installed HACS and then installed it from there. Have also downloaded the latest version and put in the nodered directory under custom_components in the config folder. When I go into node red though and try to use "Entity" I always get a message telling me to load the integration 😦 When I add a new node in NR I also have to type in the full server name every time. This feels a bit wrong too, feels like the embedded node red should put this in for me...
@cyan prawn I had the same problem a while ago and it was because I needed to reconfigure the samba add on. Have you checked it?
cyan prawn
Re configure to what? Nothing changed that I know of. I have my configuration saved on my PC and it looks the same. I have uninstalled, reinstalled, used default (with user name and password changed) and no difference. I'm sure something changed on my windows PC. Trying to figure out what.
modern hound
I didn't think mine had changed either, but when I went through the configuration again it started working.
cyan prawn
I deleted the integration. Used the default with only password and username changed. Same results
Also all my other devices work correctly. Only windows 10 PC's. 2 lost connection
Both are windows 10 home version
sly kindle
@cyan prawn so there are no stored credentials, you use the \\ipaddress and then you don't get a prompt at all?
marble kayak
I have a quick question. With the update to the database, will we see similar benefits if we're using the MariaDB add on? Is it worth it to keep using MariaDB? I initially swapped over because HA would take forever to load (which is not a little bit moot because of the last update), and the logbook and history were slow.
sly kindle
yes, it works with the db you have set under recorder:
you should see benefits no matter what db engine you are using
marble kayak
great thanks!
cyan prawn
I get windows can not access \\192.168.1.48 my home assistant address. I have been playing around I got the drive discovered on a network scan, but no credentials are asked for.
It looks like some changes with windows 10 Home edition where some network stuff was changed
My Samba error log ```waiting for connections
netbios connect: name1=HOMEASSISTANT 0x20 name2=OFFICE 0x0
netbios connect: local=homeassistant remote=office, name type = 0
netbios connect: name1=HOMEASSISTANT 0x20 name2=OFFICE 0x0
netbios connect: local=homeassistant remote=office, name type = 0
Could not find child 292 -- ignoring
office is the pc I am trying to connect with
cunning wolf
If nothing changed on HA and something changed on Windows, it's still a Windows issue.
cyan prawn
I agree that windows is having an issue. It does not mean that it is a windows issue. MS may have closed a security hole that they allowed prior to the update. Again, I don't know. Until I find what the issue is I can't tell you what the cause is. Lots of things work that are not implemented correctly and they stop when an API gets changed. I have seen this many times.
cunning wolf
Yet you're the only one I've seen posting about SMB issues. It's not the addon.
Check out superuser or something. It's not a HA issue.
I know I sound blunt. I'd like to see your problem solved - you're just going to get nowhere asking here.
cyan prawn
Read the forums. There are a lot of people posting on Samba issues with windows 10 home
cunning wolf
Sure. That means they all shared the steps they took to fix HA then, yes?
cyan prawn
Again, there is a default setup per the instructions. It says change the user name and password.
This does not work for me and many others.
Where is superuser or something. I'll check there
cunning wolf
I'm not sure you grasp this. You've found a bunch of people for whom it doesn't work. There are many more people for whom it does. I'd wager that the majority of HA users have SMB set up, since it's the most convenient way for novices to access a remote system.
You... haven't even found superuser while looking into your issue? Or you that adamant that it's the addon?
cyan prawn
I had it setup working for over a year. It stopped 2 days ago after an update of windows
I understand how it should be setup
cunning wolf
update of windows
🤔
When something breaks, you're not looking for the thing that stayed the same. You're looking for the thing that changed.
cyan prawn
I am not that adamant. I started with I don't know what the issue is.
cunning wolf
It worked for two years until you had a Windows update.
The issue is something in the update. Start there, not here.
cyan prawn
No. It worked for a little of a year. Again, the add on uses a protocol that MS has stopped using and recommends all to stop using. Not sure if something else was changed in the update.
I'll see if I can roll back the update
cunning wolf
It worked for you before the update. It stopped when you updated. You still aren't getting this, nor do I have the patience for it. Bye.
cyan prawn
Fine.
night hearth
Howdy folks, trying to install mqtt and zigbee and keep getting this error when starting mqtt
Can't start addon_core_mosquitto: 403 Client Error: Forbidden ("endpoint with name addon_core_mosquitto already exists in network hassio")
hi @cunning wolf
cunning wolf
Ah, that's refreshing. An actual HA addons query 😄
night hearth
lol
cunning wolf
Looks like you've attempted to install before and it's still get something there.
night hearth
yeah, I did an uninstall then reinstalled
cunning wolf
However, I don't know how you uninstall something that thinks it's already uninstalled.
night hearth
should I reboot in between?
cunning wolf
You can try
night hearth
sure, why not?
cunning wolf
If it doesn't work, someone else can help you remove the container. I don't know how.
night hearth
Turn it off and back on again
noted
ok its good, do I need to setup a local user or will it use the HA user?
nm I made a user already, I'll use it to be safe
cunning wolf
A user for what?
night hearth
Sorry,for the broker. I know I need one for z2m
oh, sorry this would be a zigbee question
cunning wolf
You're here already, it's fine 😄
Doesn't matter what username and password you use for the broker as long as you use the same details for anything else that needs to talk to the broker.
night hearth
good good. OK its talking and see my device in the logs.. Just gotta get it to recognize it in the device list
olive geyser
if i am using home assistant supervisord (docker containers) with the official nginx ssl proxy and have 'use_x_forwarded_for: true' set in the configuration.yaml for ha, shouldnt the nginx access logs show the true ip of the visitor and not the 172.30.32.1 hassio ip?
plucky oyster
if you add duckdns with lets encrypt does it automatically bind an https server to 443?
olive geyser
no
plucky oyster
8123 doesn't turn into https does it? What port do you connect to?
8123 doesn't turn into https does it? What port do you connect to?
olive geyser
sure, you can use ssl with any port
plucky oyster
yeah I just didn't think you could do both since http is still working on the same port
maybe it's not working, shouldn't http stop working?
olive geyser
you can use http with the ip address and then https with the domain. both same port
plucky oyster
so if i expose port 8123 to the internet you can still connected insecurely? ok i'll just have to remember
olive geyser
@plucky oyster you could use the nginx proxy addon
speaking of the nginx proxy, I setup multiple nginx locations in so that i could access other containers with the single port and setup http auth for them. They are integrated into the cpanel through custom iframe panels. Thought i could be sneaky and add the username:pass@mydomain for the iframe urls, but unfortunately it looks like chrome now blocks such requests: 'Subresource requests whose URLs contain embedded credentials (e.g. https://user:pass@host/) are blocked'. Want to expose these apps so i can access them remotely without having to login to both HA and the http auth
plucky oyster
I think https is just not working
olive geyser
@plucky oyster remember that internally you have to setup your dns to resolve that domain to your internal ip address
plucky oyster
i used my cellphone
(off the wifi) also interally I thought i could just use the ip address and ignore the warning but it says it sent an invalid response
olive geyser
@plucky oyster did you setup the http: details in the configuration.yaml to use the ssl cert that duckdns created?
and then of course restart it
plucky oyster
accept_terms: true
certfile: /ssl/fullchain.pem
keyfile: /ssl/privkey.pem```but that's in duckdns, I did not edit configuration.yaml
olive geyser
right, you need to edit it there. What you listed is just where letsencrypt stores it
plucky oyster
the instructions don't say what to put in configuration.yaml anywhere, just the add-on configuration
what am I supposed to put in configuration.yaml
i see what to uncomment
thanks
olive geyser
http:
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem
thats in your configuration.yaml for home assistant
plucky oyster
thanks, I'm not sure that's in the docs
ok great, now it works like I expect, no http only https even internally
fleet cloud
for hacs add on once they are installed and the server is rebooted where can i enable them
olive geyser
@fleet cloud where can you install solutions through HACS?
fleet cloud
i dont understand. i installed the ADT Pulse add on but cant find it
olive geyser
@fleet cloud did you restart and look under integrations?
btw, this is for hassio addons. not really anything from hacs
fleet cloud
nm figured out thanks tho
night hearth
I have added a Xiaomi sensor via zigbee2msqtt. I can see its recognized and paired(I think) in zigbee2mqtt, but it does not show in devices. I am using permit_join, but do I need to do something else? I cannot seem to find the guide I used last time. Any Ideas?
dense spadeBOT
night hearth
Noted. Want me to delete it?
weary stratus
file editor add-on..is there a way to do git add on all changed files at once? instead of manually selecting each?
cunning wolf
file editor add-on..is there a way to do git add on all changed files at once? instead of manually selecting each?
@weary stratus If it's like the real VS Code and has a terminal, use that.git add .is the command to stage all files in the current working directory.
weary stratus
yeah..I know how to do it in the terminal..was just wondering about the gui
cunning wolf
In that case, don't bother selecting any files. Just click the tick icon and it'll ask you if you want to stage everything. http://prntscr.com/tayoe0
Again, assuming it works like the real thing. I don't use the addon.
weary stratus
talking about this addon:https://github.com/home-assistant/hassio-addons/tree/master/configurator
hmm..might switch to the vscode add-on instead
blissful raven
Running Hassio and using the Let’s Encrypt add-on, is there any chance of using another DNS-provider than the ones that are listed as supported? With my current setup (based on Hassbian) I’m using certbot together with the python package certbot-dns-domeneshop.
fast summit
let's encrypt addon should work fine with your own DNS provider @blissful raven
you'll need port 80 open though
blissful raven
@fast summit I forgot to mention, I need to use dns challenge.
fast summit
The documentation seems to indicate that it's not possible then
ionic pond
I have a question regarding custom components. The descritpion says "Copy the files to '/confg/custom_components'", but I can't find this directory no where. Any suggestions where I could look?
mint sierra
@ionic pond The place where your configuration.yaml is saved is the /config folder. You can just create the /custom_components folder
ionic pond
@mint sierra thx.
hoary jasper
I am using zwave2mqtt in hassio all my zwave devices are discovered except one is there a waqy to force discovery in lovelace
cunning wolf
Lovelace doesn't discover them, HA does. And you'll probably get more help in #zwave-archived
cedar rover
Deconz bumped to 2.05.78 but nothing is said about buxfixes does this mean there arent any fixes pushed or code changes? Sorry for asking but I have a some issues with deconz
It was running smooth for a long time but after a fresh hass install I can't get deconz to work anymore
cunning wolf
Might want to ask in #zigbee-archived then
dapper robin
im getting the error:```
/bin/sh: lsb_release: not found
@dapper robin this is more like a firmware environment. You can't apt-get things. You've got the add-ons, which run in docker containers, and whatever the add-ons allow for
dapper robin
@sly kindle Im not sure what you mean there. This is an error that the motion eye add on is reporting in the log. The UI is non responsive beyond the front page so im not sure where to go from here.
sly kindle
@dapper robin have you uninstalled it and reinstalled?
dapper robin
A restall seems to have improved it
How would I then get it to pass the cameras forward to home assistant?
Actually it seems that a reinstall didnt repair it. I still get /bin/sh: lsb_release: not foundin the log @sly kindle
sly kindle
it doesnt pass cameras to HA. You would use camera integrations for that
dapper robin
Ah ok sure Still cant get into the ui anyway since it appears to be missing that package
upper abyss
How can I start NodeRed in safe mode?
I've tried ssh using "hassio addons start a0d71111_nodered --safe" , gives "unknown flag: --safe"
open otter
Hi
I need to have the ability to cut the internet in certain devices of my network after a few hours of daily usage. Can this be done with AdGuard Home add-on?
lethal tide
Hello. I noticed, that the addon protection mode warning does not have a red background anymore - its grey with white font and very hard to read. Is it just me, can someone confirm that?
It looks like that: https://imgur.com/a/yEGAsN6
@open otter I don't use AdGuard myself. I don't know. But keep in mind, even if it's possible somehow, it won't be bullet proof. Some could just use another DNS provider instead of Adguard.
open otter
@lethal tide . That's not a problem for the next 4-5 years since my kid is 10 y.o., but I don't think it can be done with adguard addon anyway
lethal tide
Some home router have such features. Maybe yours too.
civic thunder
Does anyone know if it is possible to integrate LDAP into the BookStack plugin?
waxen hull
@raven tinsel sorry to tag you, but I think I've run into an issue with DB corruption in my Unifi controller addon. I thought that I could leverage portainer to open up a shell to the addon to execute a mongodb repair as recommended by users on the ubiquiti forum, but it doesn't show any addon containers are running. I'm also admittedly unfamiliar with the architecture of addons in hass os
is there a way to get access to a shell inside of an addon container?
my logs are filled with Exception in thread "ubnt/tcp" com.mongodb.WriteConcernException: Write failed with error code 13440 and error message 'bad offset:0 accessing file: /usr/lib/unifi/data/db/ace.0. See http://dochub.mongodb.org/core/data-recovery'
viscid orchid
You can go into "Settings" in the Portainer addon, scroll to the bottom, and remove the filter for "addon" to see those containers, but you're on your own from there
viscid orchid
or start a shell in the container from the SSH & Web Terminal addon with protection mode disabled
waxen hull
I see them now; time to shoot myself in the foot
viscid orchid
I'll disavow any knowledge of such foot-shooting
waxen hull
i have no idea what you are talking about
well, I think i've figured out what's going on... somehow I've used 100% of my SD card but I have no idea what could be causing it
viscid orchid
Good debugging. Could be logs or the HA database
viscid orchid
Wow
waxen hull
and had to downgrade to 0.111.4 because my DB would not migrate
viscid orchid
How big is your card?
viscid orchid
Hmm
waxen hull
and mysql is on a different host
viscid orchid
du -h /config is a good place to start
waxen hull
only 54mb in config
I am remarkably impressed that HA kept on kicking despite this
nothing in my house has stopped working, until I tried to log into my unifi controller haha
viscid orchid
must be tolerant of database writes failing
waxen hull
well, like I said, the DB is on another machine
so the only writes would be from addons or logs
waxen hull
alright, back to #add-ons-archived and unifi :
51274936 /data/addons/data/a0d7b954_unifi/unifi/data/db
so this seems off
well it's like 760 attempts at repairing the database at ~70mb each
that's cool
mystery solved
dense spadeBOT
waxen hull
yeah, the DB can't repair.. this seems to just be a unifi controller issue.. time to reinstall the container and restore config from backup 🙄
now... if I could only remember why I was trying to log into the controller in the first place...
fyi the coincidental correlation to the 0.112 upgrade is likely because of an unsafe shutdown of the raspberrypi that corrupted my unifi controller database. so there's that idiot-of-the-day moment
viscid orchid
There will always be dragons on a Pi with an SD card
manic fox
I am trying to run the MariaDB add-on and connect to the recorder component. It works fine when i am connected and using. However, when i reboot the RPI, I believe the Maria DB does not come on before the HA starts up and somehow it never gets the instance. Is there a way to force the add-on to be priortized?
I do not want to use a different machine for the DB. mine is the 64GB card
weary stratus
Hi i have cloudmqtt set for owntracks on ios. I have 3 devices in family but only one is working. I read everywhere but not find solution. Any suggestion?
That is linked with automations
I forget i have an iBeacon connected
umbral root
Having installed InfluxDB + Glances, I am able to get the data from glances. But had to use homeassistant:8123/a0d7b954_influxdb instead of a0d7b954_influxdb (which i see in Frencks tutorials). Is this because the docker containers are not directly exposed (anymore?)?
Should both homeassistant:8123/a0d7b954_influxdb and a0d7b954_influxdb be reachable? or how does HassOS work?
umbral root
So the result of not understanding the above is that I can't seem to manage the integration for influxdb. Here's my config, do you see anything wrong here?
influxdb:
host: homeassistant
port: 8123
path: a0d7b954_influxdb
auth: true
database: home_assistant
username: home_assistant
password: <my password>
ssl: false
max_retries: 3
default_measurement: state
There is no data coming in
And I don't know where to look for the logs yet
chrome cape
people a stupid question but is there a nice radio addon for home assistant in combination with chromecast
lapis radish
What’s the best way to get a VPN for my network through a home assistant add on?
viscid orchid
WireGuard?
steep birch
Can I comment with # in add-on config files?
cunning wolf
If they're YAML, yes.
steep birch
Nice, thank you
uncut steppe
Hello, anyone know if there is an existing addon or ha feature that would allow you to share person location data with another ha instance?
My usecase is I wana share my location with a family members instance
cunning wolf
How are you sharing location data with the first instance?
uncut steppe
HA app on my phone updates the location on my instance. I wana push that data to another ha instance.
cunning wolf
But the two instances are completely separate and shouldn't see anything else from the other?
uncut steppe
correct. I just want location data. I was thinking something on the lines of creating a low privileged user on the target ha instance then posting the location data from my ha
cunning wolf
I haven't heard of an addon that does that. Couple of other options though:
- stop using the app for location, switch to something like OwnTracks that posts to an MQTT broker (and have both instances subscribe to that)
- set up some automation in your instance that publishes somewhere the second instance can see.
uncut steppe
ah you are right.I could do this with and automation on the source and a webhook on the target.
steep birch
Would someone be able to help me with: https://github.com/Limych/addon-presence-monitor ? I would like to change the frequency that this add-on scans if possible. How can I do this? If set to a very low value, how much would that affect performance of a rpi3b+ and the battery life of tracked devices. (assuming they are home)
viscid orchid
the underlying script (monitor.sh) provides a ton of parameters, but the addon doesn't expose them
cunning wolf
If you want to use all of the options, you'll have to install monitor somewhere.
The addon is a nice compromise.
viscid orchid
still, I found the periodic frequency to be bounded by the 60s BTLE scan, regardless of any smaller values you provide
I made some minor changes to "fix" it, but you'd need to run it outside the addon to tinker
cunning wolf
I wouldn't have thought there's any benefit to it scanning more often. Just trigger a departure scan when your door opens.
viscid orchid
that would set off my alarm 🙂
viscid orchid
it all comes down to how one uses presence
I'm looking for the fastest arrival response possible, and a more lazy departure
cunning wolf
Then do the opposite... leave departure scans alone, trigger arrival scans 😄
viscid orchid
but yes, using triggers like motion & door sensors to trigger arrival is helpful
cunning wolf
It's all driven by MQTT after all.
viscid orchid
I can probably turn down the arrival frequency now that I have additional triggers in place and understand how the thing works
just know that the timing parameters are all "minimum" values
steep birch
If you want to use all of the options, you'll have to install
monitorsomewhere.
Aha, this goes on a rpi zero right? Still learning about the whole bluetooth tracking thing. I have one zero laying around but have absolutely no idea how I have to install everything etc. Does one of you have a good tutorial on how to set it up? Currently using wifi ping for presence but it's very unreliable ...
viscid orchid
like, they could be much longer
could be, yes. If you have a Zero W, it already supports Wifi and BT and you have an all-in-one
cunning wolf
It can go on any Linux host, werra
steep birch
Ah
cunning wolf
If you're going to use a Pi Zero, just install Raspbian and take it from there.
viscid orchid
detailed instructions: https://github.com/andrewjfreyer/monitor
right from "flash this thing"
cunning wolf
You're always too fast for me 😄
steep birch
I've a Zero W so that's good
viscid orchid
I have a tab open because I've been messing with it a lot
steep birch
But I would like to keep it on the main HA pi if possible so manually triggering a arrive scan sound like a very good option. But not sure yet
uncut steppe
thanks for the info @cunning wolf
steep birch
That can be done using monitor/scan/ARRIVE right?
viscid orchid
Wifi and BT tend to interfere with each other on the Pi and I've had better luck with one or the other on a separate dongle
yeah
BT dongles are cheap, and I prefer Ethernet for network
steep birch
Aha, I will take a look at it! Thank you guys. Is there a place where I can ask for help if I decide to use a seperate pi?
viscid orchid
there's a forum thread
steep birch
I use ethernet on my HA pi now so it should be fine
viscid orchid
steep birch
Thank you!
viscid orchid
I'm not sure that it's really maintained anymore, but it works well enough
and it's just a big shell script if you want to poke around
steep birch
Guess there is one way to find out
viscid orchid
be careful relying on it for departure, though. You really need to tie it to something else concrete, like a door opening
before I did that, it woke me up two days in a row thinking that I'd left when it just didn't detect my phone for a bit
viscid orchid
or that. I also use a timer that helps avoid false departures
steep birch
I also just found a setting that defines retries for departure
That could also help preventing false departures
At least, I think so
viscid orchid
so it says
just keep an eye on the issues on github. I have some notes and potential changes here: https://github.com/andrewjfreyer/monitor/issues/329
it helps to be able to be able to read the script and add strategic debug when it doesn't do what you expect
everyone has their own needs, and the script has become a bit of a monster
steep birch
Yea, sadly I don't understand it...
Did your battery life get affected a lot with these changes you made?
viscid orchid
not that I can tell
haven't seen any issues with Wifi either, but my phone and laptop are on 5Ghz
my IoT devices haven't complained or broken
cunning wolf
BLE doesn't take much power at all. That's the whole point.
Your phone's constantly being queried by other devices around it.
All of this is happening already, so monitor isn't going to drain your battery more than it is already.
steep birch
Aha, could you maybe explain to me how to apply these changes? Would love to try it. (only if you want to ofc)
viscid orchid
mine? don't worry about them
viscid orchid
I'm pretty picky about having complete control, but it may not be necessary for you
just try it as-is
steep birch
Rob, Do you use multiple monitor points? Seems like devices that are on the second floor already have a confidence of 0. Could this be correct?
viscid orchid
I have 3 - 1 in my garage to see me come home, one covering the back half of my house and one other one on the first floor
cunning wolf
You guys must have big houses 😄
viscid orchid
by default, it only pings your phone when it hears other activity. that add some randomness to it
cunning wolf
My Pi is in the lounge and it covers everything.
steep birch
Well I don't that's why I'm very suprised
viscid orchid
my garage walls tend to block RF, so I lose that one pretty often
cunning wolf
Remember the range of Bluetooth is fairly low. Around 10m line of sight.
Add a floor/wall and you're going to lose a lot of signal strength.
viscid orchid
the others are pretty far apart
cunning wolf
Find a central location for it and try again, werra.
viscid orchid
the key for me is that I always want to be in range of something, and adding another node definitely helps with that
especially if you're relying on its logic of waiting for BT activity to probe, which makes it harder to predict when any one node will probe
I put them on my Lovelace dashboard and it's useful to see the confidence levels rise and fall as I walk around
steep birch
Somehow the range is fine now. Except publishing presence/scan/ARRIVE or presence/scan/DEPART doesn't seem to do anything. After some searching it's a known issue when using the addon... It works fine when running the script on a zero w
rich skiff
Good evening all
I'm like a kid in the candy shop with all the addons available. Many seem fairly straightforwards with regards to setup.
I see many addons don't use the HA credentials, though, instead requiring its own user to be configured.
While configuring a username+password isn't a challenge, I expect maintaining them will quickly become a hassle.
I use lastpass for my password storage - what are your strategies / experiences with this?
sly kindle
are there really that many?
rich skiff
Might be the job talking (integration consultant) but anything I have to do more than 3 times I tend to want automated :)
weary stratus
do you guys know if Norde.red is working in HA on rapsberry 4 4gb?
if i inject 1 or 0 to gpio nothing happens
dark yoke
pearl nova
Is there a good guide for setting up a MQTT broker on HASS core?
or wait
that's not here
ugh
weary stratus
Hi,
Set up:
- Home Assistant 0.112.1
- Shelly 2.5 with MQTT (no cloud), Max Qos 2, Clean session ticked
- MQTT server: Mosquito add-on in HA
- MQTT covers added, with QoS 0
Almost every 3-4 days, my shellies seem to have their position incorrectly reported in HA. It's fixed by rebooting the MQTT server, which makes me wonder if it's the queue which is overloaded and needs to be reset. In MQTT box I can see the position being reported quite frequently.
Any idea's or suggestions on how to resolve? Is this mosquite add on related?
lofty junco
Can I get the Grafana Add-On to use the same InfluxDB that Glances Add-On uses? The same influxDB host path that are used for Glances doesn't seem to work for Grafana InfluxDB Data Source (I get a 502 error even though path and port are the same).
mint sierra
@rich skiff There’s an add-on for that 🤣 https://community.home-assistant.io/t/home-assistant-community-add-on-bitwarden-rs
high cave
if I'm running HA in a VM (Virtual box on windows), where are the addons and configurations for the addons stored? For example, I want to change the polling time for the myq addon down to 120 seconds instead of 61 seconds. For the life of me I cannot find where the addons are stored or how to get into that area - i've tried with the file Editor addon and ssh via terminal but can't seem to figure out what the file structure or architecture of services are. If there is a technical outline location that I should reference first, please feel free to send me there 🙂
viscid orchid
It’s not documented for users because you’re not supposed to be messing around in there 🙂
Is it really an add-on or an integration?
high cave
Fair point Rob, and yep it's an integration (still very very new to HA) - regardless, they had a bug late last June and one suggestion was to change the useragent string, for that as well I couldn't find the path anywhere to edit (they had steps if you were running docker but nothing for a VM setup, I assume it must be different).
FWIW - the reason for updating is, we've had troubles now with the myq app and I'm wondering if I'm being rate limited, thinking if i turn down the rate or polling for myq that might help (as a test)
viscid orchid
If the configuration that you want is in the integration code, you can create a custom_components directory in your config directory and copy the integration code in there. Then modify it as you like
This is probably the code you want: https://github.com/home-assistant/core/tree/dev/homeassistant/components/myq
dull jewel
Grafana question: how can you "SELECT" fields other than the IDs (state_id, old_state_id, event_id) in the states table? Wanting to sum the values in a specific field, but only letting me select the ID fields. Is it restricting the things I can select to indexed columns?
Works fine if I manually edit the SQL, but can't use the Query Editor 😦
pallid kestrel
Hello i'm trying to use traccar with a GPS Tracker (not from mobile app) but the addon seems to have only the port 5055 exposed (and also not configurable from supervisor) and not all other the wide range the official container does... anyone know something to how to get listening to these ports like 5001?
weary stratus
I have added the letsencrypt addon and set it up as well as duckdns. But I cant seem to get to my HA from external. What troubleshooting should I start working through?
fresh install btw
sly kindle
@weary stratus you don't use both add-ons. Just duckdns
sly kindle
duckdns has letsencrypt option built in
weary stratus
ah - which could be why its no longer letting me access the system !
just as well that was one of the first things i did - at least its caught early!
so with ducksns ( I dont use nabu casa ) which ports do I need to forward ?
8123 & 443 or just 443 now ?
sly kindle
443 to 8123
weary stratus
thanks
marble kayak
Hey I just realized my retention policy on my influxdb ha database was way too big. I just changed it to be a smaller date, but when does it purge the data it was holding on to?
weary stratus
anyone a whizz on the samba share addon ?
cant quite get it to work.
guessing I have a config option out of place.
I use linux mint on the remote machine if thats any help.
sly kindle
for the samba config, you should only need to add a user and password
weary stratus
thats what i thought - but it no worky.
I see the share on the network, but i open it and there is nothing
(if that makes any sense)
where i would be expecting to see config files etc
sly kindle
were you prompted for credentials?
weary stratus
yes, this recently I was, I put the same credientials in (as per the samba addon) and it now shows me my folders. But I cant open the config fiolder
<update> I gave it my angry face and now it works ?
didnt change anything .
(off to try angry face on the wife)
sly kindle
😅
weary stratus
Hi I'm new to HA and well... I'm already trying to make an addon. On top of that I'm coming from windows so that doesn't make my job any easier. To my surprise the first part works and can access my addon's web ui through ingress (used phpmyadmin and motioneye addons' source for reference). Basically I made a php webpage that scans the local network for certain devices (maybe php is not the best approach but I already had working code in it) I would like to access the ui directly (through some port) on local network. Are there any docs to follow how to do it? I spent like a week to figure it out but no "luck" so far...
cunning wolf
There are plenty of docs available. Check out the dev channels. #devs_add-ons-archived would be a good first stop in this case.
sly kindle
before the ingress feature that's how they all worked by default
does your add-on have a network setting on its configuration page? it's lower down below
weary stratus
i have added ports and webui only to config.json (besides ingress and host_network) if thats what you ask
basically I copied most part from phpmyadmin's source
modified whatever I felt necessary 🙂
the UDP/TCP communication works as it should I just want the UI accessible on local net
anyway I'll go to #devs_add-ons-archived to get help
thanks ^_^
silver tendon
Hi All, I am having some issues with HomeKit Bridge on my Home Assistant, I can't seem to get my devices (iPhones) to see Home Assistant when trying to add the HomeKit code provided by HomeKit Bridge Setup...can anyone help me out?
woven holly
Anyone running Nginx proxy manager addon in Homeassistant and knows if it is possible to block ip:s in a text file?
cunning wolf
The #integrations-archived, you say?
weary stratus
yup. thanks
cunning wolf
Read the topics of channels before you post 😉 You'll get better answers if you ask in the right place.
pearl forum
Does HACS fall under add-ons category?
cunning wolf
HACS (and the things it installs) are custom components. They're more like #integrations-archived
vale marten
Has anyone had any success getting the Flux plugin for Grafana to work with InfluxDB?
I'm running HassOS in Hyper-V and both InfluxDB and Grafana are installed as Add-Ons.
I added the Flux plugin to Grafana using the Grafana Add-On configuration.
The message I keep getting when save and test on the datasource is:
"500 Internal Server Error: {"error":"panic: column retentionPeriod:int is not of type string"}"
Please @me or DM me if you think you can help.
distant moss
Anyone here use Mopidy?
dense spadeBOT
distant moss
Im trying to find the best solution for integrating all my audio into HA. I would like to get Spotify navigation, and control of 18 audio zones. I have 3 Monoprice amps, Yamaha smart receiver.
dull jewel
You will just need to make a #frontend-archived that exposes control to those specific integrations. I have similar with my Harmony remote + Spotify integration.
distant moss
I actually was messing with the Spotify integration.
So the spotify intergration can use the musiccast inside of home assistant
Intresting okay.
dull jewel
Yeah, I don't personally use HA to instigate my music playback (just use Spotify Connect to my receiver for that), but I can easily use HA to change outputs on my receiver. With your large setup, you should be able to use a combination of scripts to toggle speaker groups.
Would also very much suggest this: https://github.com/kalkih/mini-media-player
Has built-in support for Yamaha MusicCast Speaker Groups.
distant moss
Yeah the idea is to have a communal tablet that has the HA android launcher
distant moss
Weird, I can't find mini media player in hacs. Says its in hacs on the Github page.
dull jewel
You in the Frontend section? It's a Lovelace card, not an integration.
distant moss
Sorry lol this new UI threw me off, I had the plus below the bottom of my actual screen
lol
Im a dope.
last apex
<update> I gave it my angry face and now it works ?
didnt change anything .
@weary stratus I've just done a new install of HA on docker and I am having trouble getting the Samba Share addon working too (I had no problem with it on my previous hassio installation). Do you have any idea what you might have done that got yours working?
SOLVED: I'm an idiot - I tried to map the network drive to \192.168.0.101\ but it should have been \192.168.0.101\config
weary stratus
ah - good - thats what I would have suggested ? ( I wouldnt - I have no idea how I fixed my issue).
scenic crescent
Is it normal that the add-on menu item isn't available on the docker version of Home Assistant?
weary stratus
I think it is.
There were some platform renames recently, but I used to use Hassbian and that didnt have the addon menu that HassIO had to offer.
modern hound
Can anyone confirm for me that I should not expect the plugin version of Node-Red to have my entities defined in it? Now do I get NR to respond to an HA event if NR does not know what entities to watch for track etc?
I keep seeing people demonstrate this and on their versions they see the entities when they type them in. Mine is completely blank, no way to find any of the entites at all.
cunning wolf
For Node Red questions, you might want to ask in #node-red-archived
modern hound
ta Mono, I had never noticed that one down there. What I get for not scrolling down...
dense spadeBOT
queen shuttle
Guess that post was too big. In short, having intermittent success with mosquitto broker 5.1. Hoping someone can read the above and lend some guidance for diagnosing. See https://paste.ubuntu.com/p/9DDX2TzcXr/ for full details. Thanks
cunning wolf
Are you saying that you can successfully publish to the broker from another client (Eclipse), @queen shuttle? If so, that would suggest that your ESP device is the issue.
And re your question about Mosquitto's stability - tons of us use it and I rarely see a complaint.
queen shuttle
no, a different broker to the esp32
cunning wolf
Your ESP isn't a broker, it's a client.
queen shuttle
mosquitto broker running on windows connects and comms with the esp32 fine all the time
cunning wolf
Mosquitto is your broker.
Ok. So the ESP communicates fine with it. Another client doesn't?
wide summit
Not to interject too much, but I'm attempting to run the Ring Alarm Addon (https://github.com/tsightler/ring-mqtt) but I'm having issues with trying to use my !secret home_assistant password option in the config.
queen shuttle
esp <--> mosquitto windows is 100% fine
esp <--> mosquitto HA has only worked twice in 4 days
That help?
cunning wolf
Have you tried with another client to rule the ESP out as the issue?
You know it can talk to one broker but not to another. That in itself isn't conclusive proof that the broker is to blame. I'd start by using other clients to find patterns.
queen shuttle
no, but if the esp can comm with mosquitto windows then...
cunning wolf
Then nothing
queen shuttle
is there a s/w client to use?
cunning wolf
On Windows, MQTT Explorer is a good choice.
You can monitor everything, as well as publish to topics.
queen shuttle
k, will try, But if the esp32 works all the time with windows mosq broker, but not with the hass broker then what would be my next step if other clients? Is there something wrong with the board that would make it an issue with just the hass mosquitto?
cunning wolf
No-one can tell you the next steps until you have more information.
It's like asking what to do when your car won't start. The advice will depend on whether it's a flat battery or if someone stole your engine.
queen shuttle
well... after like 5 reboots of HA and the esp32 the issue that plagued my all weekend seems unreproducible now. Always fun 😉 Will report back if i can get HA <--> esp32 to stop again.
Any insights on my other questions? Why isn't there a mosquitto command via bash, where's systemd / systemctl on HA? Seems to be a weirdly stripped linux.
sly kindle
It's exactly a stripped linux 🙂
queen shuttle
lol
sly kindle
The OS is based on buildroot. More like a firmware to support hardware and run docker
queen shuttle
yes indeed, but like how via terminal can i tell if mosquitto daemon is running and how to check if it's listening on ports? netstt wasn't helping.
sly kindle
As everything is in its own environment/container, you would need to be in the container for some of those things
Depending on the context, you either need to be connected to the host OS, or you can use the community ssh addon with protection mode off, which would let you use docker commands
queen shuttle
ah yes, i'm not really familiar with docker much, may be time to learn a bit. I'm using the community SSH plugin, but didn't think about a protection mode setting since it's logged in as root apparently. That'll give me something to tinker with though, thanks!
Letting the Pi and the esp32 cool for a while as I can't seem to reproduce the comms error anymore. Frustrating and unsurprising to my luck that it would become non-repro when I finally start to reach out for help :/
obtuse crow
Hi Everyone. Wondering if anyone has used mariadb in a docker and then done replication to an offsite or another location.
I want to take my 'production' data and send it another server in 'real-time' 🙂
to clarify - take all my HA production data 🙂
Open to other ideas if someone has done this a different way.
dry ledge
Hi there, I have a problem accessing my homeassistant instance from external. I have two NATs, so a normal DynDNS System doesn't work. My primary target is to connect my and my wifes iOS App to the Server. I don't want to use a permanent VPN connection to my home, so a VPN between my Phone und my HA is not a solution. Also it's no option to connect my router to a VPN, I don't will lose a lot of speed. So I have a little external server with static IP running, so my Idea is to establish a VPN oder WireGuard connection between my HA and Server, than calling the IP of the Server will lead me to my HA, right? Did anybody do something like this before? Has anybody a tutorial for me?
tacit kettle
looking for some help with some orphaned ESPhome devices. Were a holdover from old install and they do not show up in integrations. They show up in devices, and have entities assoc with them. Can I just delete from core. files and restart? I cannot find another way to remove them.
cunning wolf
It's generally a bad idea to mess around in those files. If you insist on doing it, at least back everything up first.
tacit kettle
Oh for sure, just not finding a way to do it from GUI. It says they are part of the integrations but they do not show up in there at all.
cunning wolf
Yeah, some stuff gets orphaned occasionally. I have a couple of old ESPHome devices too but they don't bother me enough to risk breaking things. 🙂
tacit kettle
True, I like everything to be clean and organized though. My OCD issues.
graceful burrow
Is there any way to force HA to rescan the addon repositories? Sometimes (like now) I see that a new version is up in a repository, but HA doesn't see it for a while. I've tried re-loading in the add-on store and restarting HA with no luck.
(10 minutes after I tried, the new version appeared, so this is now more about future cases. :))
full sparrow
I installed mariadb and followed the documentation. All I changed in the config is the password, and I'm seeing this error when it starts:
2020-07-08 19:02:07 22 [Warning] Access denied for user 'homeassistant'@'172.30.32.1' (using password: YES)
Though, I'm not sure what 172.30.32.1 is supposed to be?
full sparrow
I'm thinking it's some component trying to access the database. But I'm not sure which one?
dull jewel
NGINX Proxy Manager also uses MariaDB. Possibly also Grafana if you have it configured to.
dull jewel
Speaking of, does anyone know what the last working (docker) release of NGINX Proxy Manager was? Been a bug that prevents new SSL certs from being created for 2+ months. Want to move it off my HA install onto my network management VM.
full sparrow
@dull jewel any suggestions on re-configuring nginx? Or shall I just remove and reinstall?
I don't see any specific DB options in the config
knotty girder
Hoping this is a better place for this. I've tried in vain to get the jason0x43 / hubitat repository added per the instructions provided and after I copy paste the address and click add it just sits there and does nothing. I really need to get the Hubitat integration up and running and I've literally wasted two days trying everything but howling at the moon...anyone out there with some help?
sly kindle
@knotty girder You're talking about this as though everyone is familiar with it. What is it?
Found it through searching. https://community.home-assistant.io/t/custom-component-hubitat/166750 That's not an add-on. Its a custom integration.
You're trying to add an integration as though it were an addon, so yeah that's going to spin and do nothing
viscid orchid
It adds just fine if you follow the instructions and add the repo to HACS
sly kindle
(If HACS is configured, which I assume it's not)
wet phoenix
Hi. I´m using Deconz addon for Home Assistant Core and what to upload new IKEA firmware files. Where should i put them if i login to my Home Assistant box using ssh (Winscp)?
sly kindle
@wet phoenix it might be better to ask in #zigbee-archived or at the deconz discord
wet phoenix
@wet phoenix it might be better to ask in #zigbee-archived or at the deconz discord
@sly kindle will do.
quartz wave
im not getting any entities from my tellstick, not sure if its configured wrong or if the addon does not work propperly on my proxmox setup :/ i see this in the addon log: Connecting to TellStick (1781/C31) with serial A6028BNB
so i guess it should work?
sadly i got no 433mhz door sensor to activate it with to try :/
but i know my neighbours have had 433mhz temp sensors before, so those should show up if they havnt been thrown out
limber talon
Hi guys I am using Deconz addon in HA for my zigbee devices but I was thinking to setup something like mesh map so I can see all devices (siglan strength etc) - is it somehow possible to do/setup?
quartz wave
anyone got any info on how well the flex addon work? i'm a kodi user myself but something i realy miss is beeing able to control kodi from my google home
so figured id might have to go over to the dark side (plex) for this sadly
full sparrow
@limber talon I installed an app on my PC called "VNC Viewer", and pointed that to my homeassistant. It's quite helpful and shows me my zigbee mesh. For me, the address is homeassistant.local:5900. You get the port from the deCONZ config page, under "deCONZ graphical desktop via VNC"
limber talon
@full sparrow thank you so much that was very helpful 🙂
full sparrow
limber talon
amazing thanks so much 🙂
full sparrow
I had devices that would occasionally drop off the mesh, and therefore, become unavailable in HA. This helped me to see what's going on. Granted, I don't fully understand the interface. But it did help me place some zigbee router devices to extend the mesh network.
limber talon
yes ofc this is good knowledge to have 🙂 again thanks so much!
jolly robin
I've been having some serious issues with my ha installation since upgrading to 0.112.0. It's mostly to do with the mariadb add-on. I recently set up a fresh instance of ha supervised and restored from an older snapshot that was known to work. I'm still having db issues. Is there a safe way to nuke my ha db and have mariadb build a fresh db?
glossy hare
Am i missing something simple? I'm trying to downgrade an add-on, but it looks like the cli only allows install/uninstall/upgrade, but i don't see a way to pick a specific version
Specifically i'm trying to go back to the prior version of core_zwave
boreal stratus
Could I poke someone about Grafana here? I am trying to get my daily power consumption plotted. I have the Home Assistant side of things with sensors and daily and monthly all setup and feeding into InfluxDB. I can't seem to plot it Grafana such that the units and numbers make sense. Thanks!
NVM, my actuals values don't make sense
distant moss
Hi Gents. I have the mopidy (edge) addon installed and running. Mopidy sees the raspberry pi with Snapcast installed but when I play music, it is silent. I suspect is has to do with filesync between mopidy and snapfifo. Should the snapcast server stream be pointed to a share on hassio, or does mopidy handle the sink?
fair flint
Just a FYI to Frenck or anyone else -- There is a bug in the current NR 1.1 addon that makes NodeRED unresponsive at times to browsers -- It's fixed in NR 1.1.1 which dependabot has merged but has not yet been released
median oar
Hey guys! Does anyone uses the Ngrok Add-on? Almost everything seems to be working pretty well here, including the integration with Google Assistant. The only problem I am having is that sometimes the Tunnel URL changes and I have to reconfigure the whole system.
Is there any way to establish a fixed tunnel URL?
cunning wolf
Is there a reason you want a tunnel instead of just setting up a real proxy? The proxy will be more practical in the long run.
median oar
Is there a reason you want a tunnel instead of just setting up a real proxy? The proxy will be more practical in the long run.
@cunning wolf What do you mean by a proxy? I am using Ngrok because my ISP does not allow me to establish a server from here. They are using a CGNAT in the infrastructure
cunning wolf
Ah. CGNAT is a bummer 😄
median oar
Yep
cunning wolf
If ngrok isn't stable, you should consider a VPN then. I've only used ngrok for short-term connections like demoing work with someone outside of the corporate network. I'm not sure it's intended for a long-term connection like your goal.
median oar
I guess it is stable. The problem is that I am having some power outage problems lately and then when system is restablished, it gets another URL from NGROK. I don't know if this is related to any configuration.
sacred adder
hi, i'm trying to connect to samba addon, what port should i use to connect to it ?
cunning wolf
Are you using a free ngrok account? The paid ones allow for reserved domains.
You don't use ports to connect to Samba. Windows takes care of that for you, just open the network path in Windows Explorer.
sacred adder
no paid account, i installed ha on a vm on windows 10 using virtualbox using nat network
cunning wolf
There's your answer. It's normal for ngrok to generate a random subdomain every time on a free account.
Wait, you're not them.
sacred adder
i need to specify a port, otherwise i cant foward the network traffic to the internal network of the vm running ha
dense spadeBOT
sacred adder
i tried the ports 445, 137, 138, 139 didn't work 😕
cunning wolf
What IP address does your Windows 10 machine have?
median oar
Are you using a free ngrok account? The paid ones allow for reserved domains.
@cunning wolf You are right! That's the issue. I am using the free account. Are there any free alternatives to Ngrok?
crystal thistle
Howdy I am new to HA, I installed the HA image to a rPi and I want to enable ssh but the addon is not shown in the list. Do I need to add a repo to get ssh?
sacred adder
its possible to add printscreen images here ?
cunning wolf
You don't need to share an image to tell me an IP address.
But you can use image sharing sites
dense spadeBOT
sacred adder
cunning wolf
Ok. So what address are you using to access the Samba share?
sacred adder
192.168.0.2:port
cunning wolf
I'm fairly certain that doesn't work. Windows Explorer only wants a UNC path.
i.e. \\192.168.0.2
sacred adder
when i use this port no samba appears
crystal thistle
Am I asking a dumb question?
cunning wolf
Your first one wasn't. Your second one was.
sp - ignore Samba for now. What are you trying to do?
Howdy I am new to HA, I installed the HA image to a rPi and I want to enable ssh but the addon is not shown in the list. Do I need to add a repo to get ssh?
The Terminal & SSH addon should be visible without adding any repos.
It's an official addon 🤷♂️
crystal thistle
Odd all the other ones are there. Samba, Mosquitto, etc...
sacred adder
nothing, just tinkering around
cunning wolf
In that case, don't worry too much. If you want to edit files on your HA host, just use SSH to connect.
Odd all the other ones are there. Samba, Mosquitto, etc...
Try adding the community repo. There's an alternative Terminal addon there. https://github.com/hassio-addons/repository
I prefer the alternative one but ymmv.
crystal thistle
Found it. You have to enable advance mode.
cunning wolf
I forgot about that 😄
eternal steeple
I am having a problem with my schema definition; can anyone advise why this schema is not recognized?
"steps": [
{
"detect": { "ai_model": "str", "entity": "list(object|face)", "confidence": "float(0.0,1.0)" },
"save": { "name": "str?", "interval": "int(0,360)?", "idle": "int(0,86400)?" }
}
]
I want to have an array of steps which include both a detect and a save element; and I want them in pairs
sacred adder
thank you
eternal steeple
I guess schemas for addons only have 2 levels of support
I can have an array of dicts, but not an array of dicts where each dict includes an array of dict
crystal thistle
Back again. I got SSH installed and working with a password. When I switch to pub/private key pair it refuses my connection. I am using putty to generate the private key and copying the pub key to HA
cunning wolf
I'm sure I heard something about puttygen keypairs not being valid SSH keypairs.
Search the message history on this server for more info
crystal thistle
I tied using a key pair generated from the HA terminal and still no dice. This is the error I get in the log
Connection closed by authenticating user root
cunning wolf
What information do you get in the client?
crystal thistle
The authorize_keys file in HA looks odd. Usually the keys are one per line. The one in HA is 1 character per line.
cunning wolf
And please say you're not using Putty 😄
cunning wolf
Yeah, you'll need to generate a proper pair on a single line. Looking at older messages, PuttyGen is okay as long as you copy the text from the box and paste it yourself into a new file.
Putty might work but it's not going to be as verbose as command line ssh.
GUIs are for amateurs 😄
sly kindle
it has to be copied out of the puttygen UI window and then pasted into a file. You should see it as one line then
crystal thistle
It is one line in the HA config. But many lines in the authorize_keys file
cunning wolf
Remove the authorize_keys file and start again.
crystal thistle
If I try and edit the authorize_keys file by hand it is overwritten by HA
crystal thistle
No dice. What app do you use for SCP?
distant moss
WinSCP is wqhat I use.
crystal thistle
That is what I am using but it will not accept my key pair
cunning wolf
Because you haven't fixed the underlying issue of bad keys.
Does the Terminal addon you're using allow you to use a password instead of a key?
crystal thistle
yep
crystal thistle
I am using the official addon and password works fine keys no dice
sly kindle
it's not even real ssh access
it's there to provide basic access to the mapped directories (no underlying host access) and run the custom commands
cunning wolf
To be able to back up? Look at something like the Syncthings addon.
crystal thistle
Syncthings is not going to be supported much longer so I would rather not go down that road
cunning wolf
It's not?
I haven't heard that they're ending it... and it's open source anyway, right?
crystal thistle
This is from bestlibre github
WARNING : I don't use hass anymore, I've switched to a pure docker installation. This addons are not realy active anymore. I will try to do some small maintenance for some of them when I use them in docker, but that's all. I will try to point to alternatives when possible.
cunning wolf
Gotcha. Once it's installed though, there's not really anything to keep up to date.
crystal thistle
I guess I will just use password then. It is only on my local network. I wish I could get the keys working though 😦
weary stratus
how can I tell vsc add on which ssh key to use for git? file editor add on works fine, but vsc complains when I push.. can't add the key using ssh-add .
teal hollow
So I'm using SSH & Web Terminal, and I've added 'packages: e2fsprogs-extra' to the config so I can use 'chattr'
It installs fine
But when I do 'chattr -i configuration.yaml' I get this error: "chattr: Operation not permitted while setting flags on configuration.yaml"
Is there another package I need to resolve this?
eternal finch
hi ppl
how to kill this addon
addon_a0d7b954_unifi
already stop the addon
remove the addon
but it is still runing on backgroup and eating 512mb of ram
oak knoll
@eternal finch did you reboot?
distant mirage
Not sure if this is the right channel but I've been trying to get Mopidy and Snapcast up and running and hooked up to HA. so far I've installed Mopidy and Snapcast Server to my Pi (the same as runs HA in Docker) and managed to see Mopidy using Iris in the Pi browser and hook Mopidy up to Spotify.
I'm completely new to all of these programs so I'm kinda winging it.
I then went and tried to integrate into HA and found I should have installed a Snapcast Client program as well as the Server program to the Pi, so I went and tried to just install the Snapcast Client integration instead (thought I was being clever). That doesn't seem to want to work.
So my question is, for a noob who's clueless, is there a way to either attach this here Snapcast Client integration to the Snapcast Server program, or would it be easier for me to uninstall the Snapcast Server program and install the Snapcast Server Integration instead, or uninstall the Snapcast Client integration and install the Snapcast Client program?
I hope that makes sense.
Just been told I mean Add-on not Integration above btw
molten grail
Test
sly kindle
@eternal finch you rebooted? or did you only restart home assistant?
teal hollow
So I'm using SSH & Web Terminal, and I've added 'packages: e2fsprogs-extra' to the config so I can use 'chattr'
It installs fine
But when I do 'chattr -i configuration.yaml' I get this error: "chattr: Operation not permitted while setting flags on configuration.yaml"
Is there another package I need to resolve this?
@lime girder
Thanks for the comments on github. If I can figure out how to resolve this error I'm going to follow your method. For the time being I'll just keep forking :/
lime girder
actually wait, first thing chattr -i removes the immutable flag, chattr +i adds it. Did you do -i or +i?
lime girder
Hm, I'm really not sure then. I also am using SSH & Web Terminal and haven't done any customizations to it other then setting the username to root like I said in that post. I don't really see how that could change it but I'm not totally sure. Either way I know the add-on recommends against that practice so if that somehow is the root cause then probably better to stick with what you're doing
dense spadeBOT
lime girder
ah too long, right. what I posted was my full config for the add-on. If you want to take a look maybe you can spot another difference
teal hollow
Differences: I'm using a pw instead of an auth key, and zsh is true.
lime girder
so I don't think pw should make a difference given that's just the mechanism for authentication. but perhaps zsh could. I forgot I changed that
teal hollow
No dice
zigbee2mqtt $ chattr +i configuration.yaml
chattr: Operation not permitted while setting flags on configuration.yaml
finite depot
So I had an internet outage last night and I noticed that the File Editor addon can not be used without the internet as it relies heavily on CSS/Other files from gitlab/cloudflare backed sites.
Any thoughts on moving them localy?
pallid osprey
Hey @restive crow, did you learn anything more about your ESPHome dev issue? I've been getting the same error since yesterday
cunning wolf
Any thoughts on moving them localy?
@finite depot If your HA instance is local (I assume it is if you want to continue editing with no internet), then use Samba and a real editor like VS Code.
finite depot
Yep thats my next steps, I just thought it strange that it depended on external files
restive crow
@pallid osprey No ... I reinstall HA still got the same error..... I can install anyelse module .... so probably there is a problem with ESPhome dev
cunning wolf
It's a web application, it's not strange at all.
Feel free to raise a feature request though.
pallid osprey
@restive crow I asked in the esphome discord and there are other reports of this problem
lime girder
@teal hollow sorry got caught up with meetings. Kind of out of ideas at this point though so I guess I'd say just stick with the fork since that works. And I guess lets just hope that PR gets merged soon
outer swan
Hi, can some one help me:
After updating I get this error: ERROR (SyncWorker_16) [supervisor.docker] Can't start addon_a0d7b954_nodered: 403 Client Error: Forbidden ("endpoint with name addon_a0d7b954_nodered already exists in network host").
How can I get Node-Red working.
restive crow
🙂
rich skiff
It looks like the adguard addon is messing with my ability to connect to home assistant on port 8123.
Anyone have an idea how to fix this?
http://homeassistant:8123/auth/authorize?response_type=code&redirect_uri=http%3A%2F%2Fhomeassistant%3A8123%2Fhassio%2Faddon%2Fa0d7b954_adguard%2Flogs%3Fauth_callback%3D1&client_id=http%3A%2F%2Fhomeassistant%3A8123%2F&state=eyJoYXNzVXJsIjoiaHR0cDovL2lkb29uc2hlaW06ODEyMyIsImNsaWVudElkIjoiaHR0cDovL2lkb29uc2hlaW06ODEyMy8ifQ%3D%3D
I seem to be unable to get onto the pi (hass OS) using either the browser frontend, the ssh terminal or using scp... 😦
Some additional information: I installed & configured adguard for the first time a few days ago. Things were working afterwards. Didn't look at home assistant between then and now.
cunning wolf
You have a mouse and keyboard, right?
rich skiff
Yep
fiery gorge
more than likely you will have restore from snapshot. Login as root at the homeassistant command prompt. Just hit enter once to see the login.
rich skiff
Thanks @fiery gorge . I was afraid of that... Can't get in as root, connection refused.
I'll probably re-image the SD card tomorrow. Too sleepy for that stuff now.
fiery gorge
plug keyboard and monitor directly into pi you should have a command prompt. If you have backups I would use them.
rich skiff
I'll try that first, then. I thought the hassOS was headless, learn something new every day =)
Luckily I won't lose much work regardless, as I only started out this week.
graceful quarry
Hi using ESPHOME on hassio. How do I access the .bin file located in /data. I can't find the /data folder. Thanks
cunning wolf
Addons are Docker containers. If you don't know how to access them, you probably shouldn't be messing around inside them.
Also... the ESPHome addon isn't as flexible is just managing your devices on your main machine.
graceful quarry
wanting to download .bin to new device that is configured with tasmota. and update to esphome
And now backup my other esphome yaml files too
cunning wolf
And you could do all of that on your PC 🤷♂️
I love addons and some are really great. The ESPHome one not so much. It hides things you want (just as you're having trouble with now) and doesn't provide any real benefit.
surreal bear
Has anyone been able to integrate Ring Alarm, Door Sensors, and Motion Sensors into HA successfully? I followed instructions for https://github.com/rs1932/ring-alarm-hassio-addon and my log shows: [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
ifelse: fatal: unable to exec /run.sh: Exec format error
[cmd] /run.sh exited 126
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
surreal bear
I switched to this addon https://github.com/tsightler/ring-mqtt-hassio-addon and it seems to be running per the log, but cant find the new devices/entities in HA
stable marlin
i realy need help
after config the duck dns i can go to my raspberry pi and my duck dns is goin to my router pannel any ideas ?
stable marlin
so
after i installed duck dns my duck dns url is goin to my router pannel not to home assistant
but i can go to my house assistant anymore
i config the duck dns
thats my port forwarded
if i add https
oh ok
nop not working
:c
cunning crater
Depending on your setup, you may no longer be able to access your HAss setup locally. Are you using duck dns?
stable marlin
yes
cunning crater
With letsencrypt?
stable marlin
no i dont think so
stable marlin
i follow this video xd https://www.youtube.com/watch?v=XdiGdC7K4sI&t=728s
with this dock https://www.juanmtech.com/guide-to-home-assistant
stable marlin
nop
i change the configuration.yaml
http:
base_url: your_domain.duckdns.org
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem
ip_ban_enabled: True
login_attempts_threshold: 3
cunning crater
Try https://your_domain.duckdns.org/
Ok, so you have ssl certs, you didn’t get those from letsencrypt?
cunning crater
So, rewatch the video. I think you need to forward port 443 to 8123
stable marlin
sly kindle
there's no base_url: anymore
cunning crater
Part of it. Base url shouldn’t stop you from hitting your HAss setup though
sly kindle
I don't know what your problem is. I haven't scrolled up
But you're watching an old video which is no longer relevant
stable marlin
but i can get to my pi anymore thats the problem -.-
cunning crater
Duckdns with letsencrypt should still work, to my knowledge. Internal and external url just work for stuff inside the network.
Try forwarding 443 to 8123 on the HAss ip.
cunning crater
No. Other way
sly kindle
the opposite
cunning crater
External 443 to internal 8123
stable marlin
Add virtual server entry named 'homeassistantfinal' failed: External ports are already in use.
i guess i need to delete my other ports ?
cunning crater
Yes, delete the 8133 to 8123 and 443 to 443
smoky marten
I think I might have borked my HA. I'm trying to get external access while following JuanMTech's video from 2018. I didn't see that there was an updated video from this year.
sly kindle
you can't access your frontend with https://local_ip:8123 ?
smoky marten
When I tried to restart my HA, it refuses to let me back in
stable marlin
nothing give a google chrome error
cunning crater
After you setup duckdns and letsencrypt. You can’t access HAss locally in some setups
sly kindle
what error do you see?
cunning crater
Did you setup 443 to 8123 in port forwarding ?
cunning crater
And you used to hit HAss on port 8123 with your local ip?
stable marlin
i dont understand that sorry
sly kindle
you never lose local access, unless it isn't running
stable marlin
i use my raspberry ip on the port
stable marlin
with this https://local_ip:8123/
sly kindle
no you didnt
stable marlin
or my raspberry ip
sly kindle
not with https anyway
sly kindle
the actual ip address. you can share it
cunning crater
Ok, now you should be able to hit https://myduckdns.duckdns.org/
cunning crater
Are you forwarding ports to your HAss ip?
stable marlin
and after give me that say not possible to open this ip
smoky marten
@sly kindle Thanks! That got me back into HA!
sly kindle
@smoky marten huh?
smoky marten
I was having the same issue as @stable marlin
sly kindle
oh lol
smoky marten
couldn't connect anymore to homeassistant.local:8123
cunning crater
The port forwarding ip doesn’t match the ip he is giving us.
stable marlin
what ?
sly kindle
your screenshot shows 106
cunning crater
Show a picture of your port forwarding. And what ip is your HAss install on?
stable marlin
yes lol
sly kindle
good grief dude
stable marlin
ahaha sorry
sly kindle
lol
stable marlin
but why my duck dns its not working ?
cunning crater
Is port forwarding setup correctly?
stable marlin
its now and its working 😄
sorry for that
can you send a tutorial ?
@sly kindle
cunning crater
Ok, do you access HAss through https://yourduckdns.duckdns.org/
stable marlin
yes
cunning crater
Is port 443 forwarded to 8123?
stable marlin
yes
cunning crater
You more than likely need to setup a port forwarding from 80 to 80 so your letsencrypt cert can update. Also, you need to check breaking changes base_url which is deprecated and it was replaced with
external_url: and internal_url: in the configuration.yaml
You can also setup a sensor that shows you how many days left on your certs
But rewatch the video
stable marlin
i can show you my yaml
dense spadeBOT
cunning crater
Depending on your version, base_url has been deprecated
stable marlin
so what i need yo put now i guess my video its not working anymore
cunning crater
external_url: "https://www.example.com"
internal_url: "http://homeassistant.local:8123"
stable marlin
jsut that ?
cunning crater
Read man
stable marlin
oh ok
cunning crater
You don’t read the breaking changes before updating?
stable marlin
i dont update i install home assistante today
cunning crater
Ok. Well with each update, there is a laundry list of changes. You need to read all of them.
cunning crater
You should setup a ssl cert sensor first
cunning crater
How did you install Home Assistant?
stable marlin
with the image and sd card
cunning crater
Ok, ask in #330990055533576204
cunning crater
Yes...if someone hasn’t answer in about 12 hours you can ask again
I posted over In #330990055533576204
cunning wolf
What happens when you try to connect? What error do you get? What address and port are you using? Is it from within or from outside of your home network?
Gotta give us more info 😉
gritty hornet
want to change up the look of my buttons, what do you guys recocmend?
cunning wolf
Buttons? Like #frontend-archived buttons?
gritty hornet
yeah, seen some cool looks
cunning wolf
Then my recommendation (in case it wasn't obvious) is to ask in #frontend-archived.
gritty hornet
nope not to me, frontend is not a word in my vocabularly
cunning wolf
gritty hornet
what does frontend mean?
cunning wolf
UI. On this server, it specifically means the Lovelace UI.
Buttons definitely have nothing to do with addons. Addons are self-contained applications in Docker containers.
Read the topics of each channel if you're unsure where to post.
gritty hornet
ahh gotcha, only just seen that... not a big discord user
silver barn
When i try to enter the url it shows errorm unable to connect both from my local network and outside my network.
I use port 443 and i have set static ip on my router and port forwarding rules
summer forge
Hey Guys , is there addon for SDR USB sticks for hass.io ? Or nice Docker image? For getting AIS and Aircraft tracking?
brazen bridge
help guys,.. quick question wrt 'vsftp',.. where does the ftp home folder get set? I am running HA within docker,.. running on a ubuntu 18.04 server config,.. I would like to point the home ftp folder to a ubuntu file system,.. with lots of space... many tx
brazen bridge
I can see nothing in the docs,.. and there does not appear to be any configs for the 'home' directory...
woven holly
Anyone who know a syslog server addon for Homeassistant?
polar jacinth
Using Lets Encrypt add-on in DNS mode with DirectAdmin but getting this error: urllib.error.URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate (_ssl.c:1076)>
I can curl https://host.wahidsaleemi.com:2222/ with no problem. Any tips on where to look to troubleshoot this?
mild ember
amI right in thinking if I want to get tuya-convert installed on hassio on rp3 i need to use portainer and use docker?
silver barn
@cunning wolf
sly kindle
@mild ember you can just flash an sd with it
mild ember
@sly kindle with what.... Tuya? Like is there an image or you mean just use raspbian and put tuya on there? Yeah it's an option Ik have to go with.
sly kindle
you flash raspbian. you install tuya convert on that.
vivid pewter
Hey All - After some help please with Nginx Proxy Manager add on.
I have just restored home assistant to another machine. I have started a new MariaDB addon; however, when I go to reinstall Nginx and click start I get nothing. Not even anything in the logs for the addon...
Any ideas what might be going wrong?
cunning wolf
Which logs have you checked?
vivid pewter
Logs in the addon, also checked home-assistant.log though I think I only had 'info' as the default log level there.
cunning wolf
What about the Supervisor logs? That's where it'll complain if an addon can't be started.
vivid pewter
I have just rebooted the machine. Will check that as soon as it's back up
cunning wolf
You don't need to reboot the host machine to troubleshoot most problems. Restarting HA is enough.
vivid pewter
Ah, I had restarted HA only, though I have port 80 being used from another docker instance so thought it may have started with the port blocked.
Showed up under supervisor. Cheers... Ended up one of my other docker instances was using port 443
shadow agate
@raven tinsel i just upgrade my instalarion from 0.111.3 to 0.112.4 but i notice that my mqtt server stoped starting
i have unistall it and install it again
reboot with it unistalled and installed
reset config
but nothing, no even on the log
(addon log is empty not even seeing an entry, on ser ha.log I see
Authenticated 192.168.1.106 for /api/hassio/addons/core_mosquitto/info using bearer token
nothing more
any ideias?
rebooted the physical machine did the trick
thanks for everyone's time
dense spadeBOT
vivid pewter
Hey, anyone got a workaround for Adguard on Home Assistant Supervised where port 53 is taken already by the host?
cunning wolf
Yes, turn off the other thing using port 53. 🙂
vivid pewter
lol - Systemresolve - Doesn't disabling this create issues in itself though?
cunning wolf
Not a clue, I'm not a Linux expert. But if your host is listening on that port, you can't have an additional process listening on it, nor can you forward requests on that port to the container.
vivid pewter
Of course - I am all over that... Though not sure about what implications to the host it will have.
I shall go and see!
distant moss
Can yopu use HDMI audio out with the spotify connect plugin?
I installed it, but I don't see HDMI listed
pulsar wave
Hey, Can some one help me connect to my samba share from ubuntu linux? in my Windows machine I can log in with the user name and password i configure in the Configuration but the same detals did not work on my ubuntu linux machine
distant moss
I have this for mounting a smb share for my plex. //10.10.10.10/Plex/Plex /mnt/plex cifs vers=2.0,credentials=/home/chenzomo/.smbcredentials,iocharset=utf8,gid=1000,uid=1000,file_mode=0777,dir_mode=0777 0 0 @pulsar wave
chilly hare
Is there a way to tune the motion eye addons so its not as sensitive when triggering events ? I keep getting false positives and I dont know how to reduce them
vernal violet
Hey! is anyone familiar with the node-red addon? I'm having an issue that prevents me from launching it. From looking at the There's a faulty node-red palette addon that I can't figure out how to get rid of without launching it.
The log looks like this:
12 Jul 14:59:59 - Api Error: Unexpected response status; 404
at requireStatusCode200 (/config/node-red/node_modules/node-hue-api/hue-api/httpPromise.js10015)
at _fulfilled (/config/node-red/node_modules/q/q.js:787:54)
at /config/node-red/node_modules/q/q.js:816:30
at Promise.promise.promiseDispatch (/config/node-red/node_modules/q/q.js:749:13)
at /config/node-red/node_modules/q/q.js:557:44
at flush (/config/node-red/node_modules/q/q.js:108:17)
at processTicksAndRejections (internal/process/task_queues.js:79:11)
cunning wolf
There's an entire channel devoted to #node-red-archived. You'll probably get better help there.
vernal violet
OHH there totally is. Thank you!
Asked the node-red specific questions there. However, more broadly does anyone here know how to just hard remove any latent files that would be leftover from an addon? Uninstalling the addon and reinstalling, the problem file still seems t be there.
cunning wolf
There should be nothing left over. An addon is a Docker container. It's all-or-nothing.
vernal violet
hmmm. weird
because the above error is coming from the hue-api, which doesn't come included in node-red, I installed it the first time i successfuly launched node-red
and since then I've uninstalled and reinstalled a bunch of times to try to fix it
cunning wolf
Well I'd be focusing on the error message rather than just guessing.
Api Error: Unexpected response status; 404
Whatever it's trying to talk to isn't where it thinks it is.
vernal violet
True. I'm super new to HASS though, I came to HASS from using node-red just on raspbian. how would I go looking for that file in HASS?
dark yoke
That is not" HASS" that is #node-red-archived you are using something there that tries to talk to hue
vernal violet
yeah that's right. I just don't know how to navigate to find the problem in HAOS
node-red can't even launch because of the issue, so i can't fix the issue in node-red
and because it persists when I uninstall-reinstall node-red, im not sure where to go
dark yoke
#node-red-archived can probably help you with that
The issue is most likely in one of your flows
They are not deleted on reinstall/uninstall
vernal violet
oh yeah that's probably it. I'm pretty sure that is the problem. I can't launch node-red to track that down, and in HA OS I don't know how to navigate to where the flows would be stored.
dark yoke
use your favoritte file explorer and go to /config/node-red/
vernal violet
ah. I've just not set up SSH, I've just been using the web dashboard.
cunning wolf
You'll want to set up SSH anyway. It's useful to have access in case you do anything that prevents you getting to the UI.
vernal violet
https://community.home-assistant.io/t/home-assistant-community-add-on-ssh-web-terminal/33820
Is this the best way to do SSH through HA?
dark yoke
yes
orchid portal
not sure where i should ask this, i am not using vscode as an addon, i am using it as a docker container.....
i have all the same vscode extensions installed as the add-on but i get these errors about things like !secret https://i.imgur.com/ixGzYIr.png
orchid portal
ok thanks
spiral goblet
I need help with configuring Let's Encrypt plugin for Linode DNS at Hass.io. Thanks a lot.
distant moss
Im not sure if this is the correct chat, as looking at ha audio info in the CLI doesn't list the HDMI port as a output. I seen in the forums people trying to get audio out of 3.5 instead of HDMI. But i'm trying to get spotify connect to go out of HDMI. Any help would be appreciated. Rpi4 4GB on 112.4
olive geyser
if im using the mqtt addon (official), shouldnt i have a mqtt tab in developers tools?
viscid orchid
No, it was moved to the integrations page
It was in the release notes
Nothing to do with the addon
olive geyser
there is listening to topics option in the integration area either that i can see for mqtt
ah, nvm
found it
under configure
dry mortar
I just updated a flow in Node Red addon and now Node Red cant talk to Home Assistant
i keep getting [supervisor.homeassistant] Can't update Home Assistant access token! in HA Log
it is the NodeRed ingress addon
none of the nodes will connect
weary stratus
Question regarding the SSH addon, might be the way add-on data files are stored in general with HassOS, but whenever I restart my host, the "authorized_keys" file for ssh doesn't get recreated properly. I have multiple keys, and it concatonates it all into one line, which makes my logins for keys beyond the first one, not work, until I go in and edit the authorized_keys file and put the line break back in. I'm guessing the file config file is regenerated each boot from the supervisor config file, and it doesn't properly save line breaks for multiple entries for the same key value?
I tried using escapes \n \r but they didn't escape out
So it just ended up with:
ssh-rsa keyhere \n\rssh-rsa keyhere
cunning wolf
What does your config look like for the addon?
molten grail
Hello, where I can find all option list for config.yaml for the specific addon
dark yoke
addons does not use "config.yaml", the addon configuration are "config.json" as described here https://developers.home-assistant.io/docs/add-ons/configuration
tulip bolt
What's the url to the official homa assistant add-on repository?
molten grail
@dark yoke 10x
radiant marlin
Hey
im unable to find esphome addon
on supervisor tab
sly kindle
You have to add the repository
radiant marlin
how exactly?
i have to just type in ESPHome?
and when i click add nothing happens
radiant marlin
did you add https://github.com/esphome/hassio ?
no i didnt...
how?