bitter geyser Jun 16, 2020, 7:35 PM

#

my main machine is a windows machine

#

with no admin rights (work computer)

#

but i guess i could do this before going to the "site"

cunning wolf Jun 16, 2020, 7:36 PM

#

You could try the SSH route. It's not like it has to compile anything, so it'll work okay.

#

I hated using the ESPHome addon on a Pi. Took so long and often locked up the Pi.

bitter geyser Jun 16, 2020, 7:44 PM

#

oh?

topaz ravine Jun 16, 2020, 8:44 PM

#

any appdaemon expert here?

steady bobcat Jun 16, 2020, 8:48 PM

#

Generally, don't ask to ask - just ask.

#

But there's also an appdaemon discord for specific questions. Let me see if I can find you a link.

#

https://community.home-assistant.io/t/appdaemon-on-discord/81080

topaz ravine Jun 16, 2020, 8:54 PM

#

@steady bobcat Thanks. Asked over there.

sly kindle Jun 16, 2020, 9:37 PM

#

@wheat basin your yaml never gets changed automatically. you have to add those yourself

obtuse ginkgo Jun 16, 2020, 9:37 PM

#

I'm getting an alexa media player captcha now that I can't see and it says this:

Important Message! To better protect your account, please re-enter your password and then enter the characters as they are shown in the image below.

#

I updated the addon on this morning, didn't help.

#

how the f do I enter my password with no password prompt.

#

also, can't see the captcha lol.

sly kindle Jun 16, 2020, 9:40 PM

#

Alexa media player is not an add-on nor is it an official integration, but #integrations-archived

#

There are no add-ons in HACS

obtuse ginkgo Jun 16, 2020, 10:41 PM

#

got it

final herald Jun 16, 2020, 11:29 PM

#

cogneato: trying to redirect the log output for mosquitto - do you have that set up?

#

I have it reading in an external conf file, but log_dest file doesn't seem to be working in it

round birch Jun 17, 2020, 2:08 AM

#

Is it possible for an add-on to specify its own snapshot creation? I'm thinking of the MariaDB one, where the files backing the database should not be copied underneath a running database server.

timber idol Jun 17, 2020, 9:26 AM

#

Hello ! Does someone has Unifi Controller Addon ? I have a problem, the Unifi AP show as Disconnected. How to update the controller software? Now is on 5.12.72 and the latest software out there is 5.13.29

sly kindle Jun 17, 2020, 2:34 PM

#

Add-ons are updated by the add-on developer. When that happens you would then update.

full sparrow Jun 17, 2020, 3:54 PM

#

Suddenly, I'm having issues with my Xiamo Rasbpee sensors. Anyone here that can help?

dense spadeBOT Jun 17, 2020, 4:03 PM

#

Don't ask to ask, just ask your question. Then people can answer when they're around.

When you do ask a question, try to provide as much background detail as possible. Ask yourself these questions first so that others don't have to:

What version of the Home Assistant are you running? (remember, last isn't a version)
What exactly are you trying to do that won't work?
Is the problem uniform or erratic?
What's the exact error message?
When did it arise?
What exactly don't you "get"?
Can you share sample code, ideally with line errors where the error occurs?

cunning wolf Jun 17, 2020, 4:06 PM

#

@full sparrow 👆

full sparrow Jun 17, 2020, 4:30 PM

#

My SD card died last week and I had to reinstall and restore from a snapshot. Since then, I've had some issues with my Xiaomi temp / water sensors. I'm running Raspbee with deCONZ v 5.3.5, Phoscon gateway v 2.05.75 .

At first, I had one sensor showing up, but now none do. When I go to add a sensor, it never connects. I'm wondering if maybe there's an issue with the gateway and the Pi settings? I did modify the config file as directed. The first question - how can I ensure that the Raspbee is configured and functioning properly?

#

Home Assistant 0.111.3

sly kindle Jun 17, 2020, 4:45 PM

#

32 bit HassOS?

#

@full sparrow

full sparrow Jun 17, 2020, 4:49 PM

#

yes

sly kindle Jun 17, 2020, 4:50 PM

#

hmm. not sure then. Someone else who runs deCONZ might

full sparrow Jun 17, 2020, 5:05 PM

#

I was going to install 64bit, but the install guide recommended 32.

sly kindle Jun 17, 2020, 5:10 PM

#

yeah if you want the GPIO on the pi, 32 is the way to go

glacial copper Jun 17, 2020, 6:37 PM

#

Hi i seem to have some issues with Almond (1.0.1) and Home Assistant Supervised (0.111.3) hass does not seem to be able to autodetect the intergration and most of the links on the almond page do not seem to work. am i doing something totally wrong or has something changed that would break this (never tried it)

dusty mica Jun 17, 2020, 8:22 PM

#

Is there a way to run the configurator from the add-on store in standalone mode? I never use the left side with all of the HA stuff. I run hassio with hassOS and my installation type is Home Assistant.

glacial copper Jun 17, 2020, 8:24 PM

#

Hi i seem to have some issues with Almond (1.0.1) and Home Assistant Supervised (0.111.3) hass does not seem to be able to autodetect the intergration and most of the links on the almond page do not seem to work. am i doing something totally wrong or has something changed that would break this (never tried it)
@glacial copper managed to fix it by using ```almond:
type: local
host: http://core-almond:3001


Most the links on the ingress proxy pages are still broken tho

civic seal Jun 17, 2020, 9:11 PM

#

are there any documented examples on using node-red-contrib-home-assistant-websocket ?

full sparrow Jun 18, 2020, 1:23 AM

#

My SD card died last week and I had to reinstall and restore from a snapshot. Since then, I've had some issues with my Xiaomi temp / water sensors. I'm running Raspbee with deCONZ v 5.3.5, Phoscon gateway v 2.05.75 .

At first, I had one sensor showing up, but now none do. When I go to add a sensor, it never connects. I'm wondering if maybe there's an issue with the gateway and the Pi settings? I did modify the config file as directed. The first question - how can I ensure that the Raspbee is configured and functioning properly?
[11:30 AM]
Home Assistant 0.111.3

spare depot Jun 18, 2020, 2:21 AM

#

https://i.imgur.com/n9foUB7.png https://i.imgur.com/HgWiyf6.png how do i get this to turn on both speakers not just one.

spare depot Jun 18, 2020, 2:42 AM

#

sometimes it will recognize the command and sometimes it will not. i setup an automation to turn the left on when the right comes on and the the left off when the right comes on.

#

however almond fails to recognize the same command that works sometimes.

wheat basin Jun 18, 2020, 9:49 AM

#

is anyone able to help me with my duckdns addon? it stopped working in the last update and I've looked at the docs but can't figure out what's happened

#

I keep getting myurl.duckdns.org sent an invalid response

cobalt ice Jun 18, 2020, 10:20 AM

#

@raven tinsel you did a Grafana update 14days ago (to 7.0.3) but didn't push a release.
I also noticed that the link in the changelog ( https://discord.me/hassioaddons ) is no longer valid.

#

oh wait the link works in the browser

raven tinsel Jun 18, 2020, 10:21 AM

#

Just tested the discord link, it works.

#

The grafana would be correct. It isn't tested yet.

#

I don't release add-ons without testing them

cobalt ice Jun 18, 2020, 10:23 AM

#

Alright, 7.0.2 has a nasty crash that got fixed. I'll be patient then 🙂

glacial copper Jun 18, 2020, 10:43 AM

#

@raven tinsel did you recently test Almond?

raven tinsel Jun 18, 2020, 10:46 AM

#

Yes @glacial copper

#

📎 unknown.png

#

Just now 😉

glacial copper Jun 18, 2020, 10:46 AM

#

i cant seem to be able to get to Amond its pages

#

Almond to hass started working only after i manually added the config

#

but the Almond pages are 404

#

https://i.imgur.com/61QRyOm.png

#

the links go to /apps /devices /conversation

#

@raven tinsel made a irc bot plugin to speak with Almond true hass (sorry realise this is a bit offtopic)
12:57:47 <@glacial copper> !t tell me a random fact
12:57:50 <@NURDbot> It has NEVER rained in Calama, a town in the Atacama Desert of Chile.

raven tinsel Jun 18, 2020, 11:15 AM

#

😄

wheat shadow Jun 18, 2020, 11:22 AM

#

Having issues getting nginx proxy manager ssl working if anyone feels like helping out!

bold spire Jun 18, 2020, 11:23 AM

#

What's the issue? 🙂

wheat shadow Jun 18, 2020, 11:23 AM

#

https://community.home-assistant.io/t/nginx-ssl-certificate-creation-problems/205696

#

Basically, can't get nginx to actually create certificates

#

Got the addon ui up and running just fine, but I think I've done something wrong with ports

#

Found this which looks similar and everyone suggested port forwarding as the cause of problems: https://github.com/hassio-addons/addon-nginx-proxy-manager/issues/69

bold spire Jun 18, 2020, 11:26 AM

#

Are you using the NGINX add-on or standalone NGINX install? Assuming the add-on, the docs say you must have the cert created before starting NGINX?

wheat shadow Jun 18, 2020, 11:27 AM

#

Nah, I've got the nginx addon

#

for HassOS

#

https://github.com/hassio-addons/addon-nginx-proxy-manager

bold spire Jun 18, 2020, 11:28 AM

#

Could be wrong but the documentation for that add-on says you must have a certificate before you can start the add-on. This would seem to be what the error message is saying (no such file or directory)

#

Ah sorry I thought you were running the SSL one

wheat shadow Jun 18, 2020, 11:29 AM

#

Yeah, this one is a bit different. Thought the error might be a fairly universal one but i guess not 😄

#

The installation of this add-on is pretty straightforward and not different in comparison to installing any other Home Assistant add-on.
Documentation guide:
Ensure you are running the MariaDB add-on. This add-on is required to use the Nginx Proxy Manager add-on as it uses the database services provided.
Search for the "Nginx Proxy Manager" add-on in the Supervisor add-on store and install it.
Start the "Nginx Proxy Manager" add-on
Check the logs of the "Nginx Proxy Manager" add-on to see if everything went well.
Click the "OPEN WEB UI" button and login using: admin@example.com / changeme
Forward port 80 and 443 from your router to your Home Assistant machine.
Enjoy the add-on!

#

Does my port forward seem ok? Not sure if I've done it right but I've used a different external port than 443?

#

Not sure if I can just set a different port (in this case I've used 444) and redirect it to 443 internally.

bold spire Jun 18, 2020, 11:34 AM

#

I don't know much about this add-on never used it, but whats the difference in the port 82 and port 81 (entrance and web interface ports)?

wheat shadow Jun 18, 2020, 11:34 AM

#

Yeah, all good

#

81 is UI

#

82 is just what I'm using instead of port 80 (blocked by isp)

#

Not sure if that's how you're meant to use port forwarding with nginx, but if 80 and 443 are blocked I figure it's the only way to set it up?

bold spire Jun 18, 2020, 11:37 AM

#

It looks like the certificate is renewing OK according to the logs but when NGINX tries to start it cannot find the file. Can you check the contents of the directory: /etc/letsencrypt/live/npm-10/

wheat shadow Jun 18, 2020, 11:38 AM

#

There is no letsencrypt folder that I can see

bold spire Jun 18, 2020, 11:39 AM

#

Did you previously have a letsencrypt folder from an old install?

#

That has since been deleted?

wheat shadow Jun 18, 2020, 11:40 AM

#

Not sure :/ I was using DuckDNS which has a letsencrypt certificate, but pretty sure it was in a different directory

#

https://github.com/jc21/nginx-proxy-manager/issues/180

#

Might not be anything on my end I guess

#

Guess the problem with ui-addons is there's less you can do to fix it aha

bold spire Jun 18, 2020, 11:44 AM

#

I'm just wondering if the letsencrypt directory has been deleted and it cannot save the certificate because the directory doesn't exist. Just a guess

wheat shadow Jun 18, 2020, 11:44 AM

#

Yeah, the proxy manager doesn't mention needing any additional LetsEncrypt stuff, but maybe I'll look into that.

#

My thinking was that it couldn't find any cert at the directory because it failed to get created (ie. problem creating the cert). Which becomes a big issue when it goes to look for it?

#

Guess I'll keep messing around with it aha. Don't suppose there's any other alternative nginx addons that use the command line for HassOS?

#

Sorry to drag you in @raven tinsel , but does the Nginx Proxy Manager addon require an ssl to be created externally before the plugin will work? from the documentation it looks like the only req's are port forwards on the router and MariaDB addon.

bold spire Jun 18, 2020, 11:50 AM

#

I just realised, I think the ports you are using won't work, for certbot (letsencrypt) to run it requires port 80 at the moment.

#

Have you tried it with port 80 and 443 directly just to see?

wheat shadow Jun 18, 2020, 11:51 AM

#

Hmm, that would make sense. But if my ISP has publicly blocked 80 & 443 what are my options?

#

I did try, but I'll check it again 😄

bold spire Jun 18, 2020, 11:55 AM

#

Then you would need to use the letsencrypt DNS renewal instead of the HTTP renewal. You can use the DNS renewal option which requires you create a txt record but this is a manual process at the moment and probably won't work with the standard proxy manager, but looks like you could use it with the SSL proxy manager.

wheat shadow Jun 18, 2020, 11:56 AM

#

Nope, no luck. Double checked with this online tool and it says port 80 is blocked. https://networkappers.com/tools/open-port-checker

bold spire Jun 18, 2020, 11:57 AM

#

I would say this add-on will not be for you, try the DNS based challenge if you can

wheat shadow Jun 18, 2020, 11:57 AM

#

So where should I go to set all that up? The LetsEncrypt addon?

#

Yeah, ok. Fair call hehe. I assume thats in the LetsEncrypt addon

bold spire Jun 18, 2020, 11:58 AM

#

The DNS challenge looks to be supported in the LetsEncrypt addon 🙂

#

Are you using DuckDNS as your DNS provider? Looks like you might need to switch to Cloudflare as it is supported for DNS challenges

wheat shadow Jun 18, 2020, 12:00 PM

#

Sweet, I'll look into that. 🙂

#

Thanks for the help!

raven tinsel Jun 18, 2020, 12:04 PM

#

Sorry to drag you in @raven tinsel , but does the Nginx Proxy Manager addon require an ssl to be created externally before the plugin will work? from the documentation it looks like the only req's are port forwards on the router and MariaDB addon.
@wheat shadow Not really relevant anymore as it seems, but for future reference, it has certbot build in, so it takes care of that for you.

wheat shadow Jun 18, 2020, 12:04 PM

#

Cheers 🙂

weary stratus Jun 18, 2020, 1:00 PM

#

Hi all, i'm trying to uninstall a local addon using the command ha ad uninstall local_Test it doesn't work, how can i remove that addon from the supervisor page?

cunning wolf Jun 18, 2020, 1:00 PM

#

Go to the Supervisor page... select the addon... click uninstall?

weary stratus Jun 18, 2020, 1:02 PM

#

sure.... if it worked i wouldn't be here to ask for help

marble kayak Jun 18, 2020, 1:46 PM

#

this might be a silly question, but if I have influxdb running, is there any point in using mariaDB for my recorder? I like the logbook, and being able to see a days worth of use when I check more info. But not sure if I need mariaDB to do that

sharp bison Jun 18, 2020, 1:47 PM

#

Hi, may i ask you whether somebody knows what has happened recently, with hassos/docker, because i have got my own hass addons written in python3 and they stopped to install complaining about missing pip3 command. Everything worked fine until i decided to reinstall the addon. I'm running it on rPi zero W.

bold spire Jun 18, 2020, 1:58 PM

#

Did you remove the pip3 package from your install?

dense spadeBOT Jun 18, 2020, 2:01 PM

#

@sharp bison posted a code wall, it is moved here --> https://paste.ubuntu.com/p/B5hWV8fnQx/

sharp bison Jun 18, 2020, 2:03 PM

#

It seems to me that the python is not installed.... I'm a bit desperate, because it worked fine and out of sudden it fails to start....

bold spire Jun 18, 2020, 2:31 PM

#

Not sure of any of your system.setup/os but try installing the pip3 package

sharp bison Jun 18, 2020, 2:39 PM

#

I use the HassOs downloaded from the main web page....

sly kindle Jun 18, 2020, 3:12 PM

#

@weary stratus is it still in the /addons directory?

#

@sharp bison you might try #devs_add-ons-archived

rain dragon Jun 18, 2020, 3:13 PM

#

Does anyone know a way to change the site an addon redirects to? My issue is I installed the unifi addon, but for some reason when I lanuch the addon it brings me to my Verizon login page, instead of the unifi login page

#

I would like it to go to localhost instead

spare depot Jun 18, 2020, 3:15 PM

#

https://i.imgur.com/CsoXSxG.png - any help I cannot get almond to be consistant and active anything i create

sharp bison Jun 18, 2020, 3:22 PM

#

@weary stratus Yes it is in the addon directory.

midnight radish Jun 18, 2020, 4:16 PM

#

has anyone had issues with the upload feature of "file editor"? ive tried uploading small files to test my funky storage setup but after i click upload it does nothing

weary stratus Jun 18, 2020, 4:40 PM

#

@weary stratus is it still in the /addons directory?
@sly kindle no I removed it

sly kindle Jun 18, 2020, 4:50 PM

#

Have you rebooted the whole system since doing this?

weary stratus Jun 18, 2020, 5:03 PM

#

Yes

sly kindle Jun 18, 2020, 5:11 PM

#

maybe put it back in the /addons folder, install it, then uninstall it, remove from addons folder

weary stratus Jun 18, 2020, 5:16 PM

#

Ok, I named it in uppercase... it that a problem?

tall briar Jun 18, 2020, 5:34 PM

#

hi guys, any issue with latest nodered addon and its dashboard? i added a text node and deployed, went to http://192.168.14.78:1880/endpoint/ui and it says "waiting for available socket"

#

and there's no info about dashboard loaded on /endpoint/ui in logs as in the past... but dashboard is installed, nodes are there to be used...

weary stratus Jun 18, 2020, 6:25 PM

#

Hi all,I have an issue with duckdns add-on. I have set up port forwarding on my router (external 443 to internal 8123), set up duckdns correctly (both at duckdns.org and in HA), but I still can't connect through my chosen domain - I need to enter through https though. Any tips? The HA runs in Docker on a Dell Wyse terminal.

cunning wolf Jun 18, 2020, 6:32 PM

#

How can you confidently state you've set it up correctly if it's not working? 🙂

weary stratus Jun 18, 2020, 6:34 PM

#

there are no error messages in duckdns log

#

it refreshes every 5 minutes and says it's ok 🙂

cunning wolf Jun 18, 2020, 6:34 PM

#

Can you access your HA internally via IP address?

weary stratus Jun 18, 2020, 6:35 PM

#

yes, but only through https

cunning wolf Jun 18, 2020, 6:35 PM

#

Can you access it externally with your external IP address?

sly kindle Jun 18, 2020, 6:35 PM

#

that's expected

#

also check 443 https://www.yougetsignal.com/tools/open-ports/

weary stratus Jun 18, 2020, 6:37 PM

#

Can you access it externally with your external IP address?
@cunning wolf checking it now

#

also check 443 https://www.yougetsignal.com/tools/open-ports/
@sly kindle both ports 443 and 8123 are closed at my IP address

sly kindle Jun 18, 2020, 6:38 PM

#

that's no good

cunning wolf Jun 18, 2020, 6:38 PM

#

That's probably your problem. Forward them to your HA host.

#

When I say probably, I mean definitely 😄

weary stratus Jun 18, 2020, 6:39 PM

#

I set up port forwarding for my HA device from 443 external to 8123 internal

#

how should I set them up then?

cunning wolf Jun 18, 2020, 6:40 PM

#

If it was set up correctly and HA was listening, it wouldn't say it's closed.

weary stratus Jun 18, 2020, 6:44 PM

#

I scanned all common ports and they're all closed

#

could it be my ISP's policy?

sly kindle Jun 18, 2020, 6:44 PM

#

could be

weary stratus Jun 18, 2020, 6:44 PM

#

is there a way to find out?

cunning wolf Jun 18, 2020, 6:45 PM

#

Call them 😄

sly kindle Jun 18, 2020, 6:45 PM

#

have you ever forwarded ports before using HA?

weary stratus Jun 18, 2020, 6:45 PM

#

no

#

Call them 😄
@cunning wolf If I knew them, I would 🙂 I'm renting the place

cunning wolf Jun 18, 2020, 6:46 PM

#

Ja pierdole 😦

weary stratus Jun 18, 2020, 6:47 PM

#

a to tak można po polsku? 🙂

cunning wolf Jun 18, 2020, 6:47 PM

#

Only a few words... but this is an English server, so I'll stop there 😄

sly kindle Jun 18, 2020, 6:49 PM

#

@weary stratus when it rains it pours. someone else going through the same thing https://discordapp.com/channels/330944238910963714/330990055533576204/723234611886424114

cunning wolf Jun 18, 2020, 6:49 PM

#

It's going to suck if it's number 2 😄

weary stratus Jun 18, 2020, 6:50 PM

#

@sly kindle thanks!

weary stratus Jun 18, 2020, 7:20 PM

#

It's going to suck if it's number 2 😄
@cunning wolf Apparently it's not, but it sucks anyway 🙂

cunning wolf Jun 18, 2020, 7:32 PM

#

Yeah. That would've been the option have zero control over. At least if it's your ISP, you could try to get in touch.

green heath Jun 18, 2020, 11:12 PM

#

Do I understand correctly that if I add the DuckDNS Add-on that I DO NOT need to also add the Let's Encrypt add-on? I've read a lot of varying information, and am not 100% clear.

oak knoll Jun 19, 2020, 12:14 AM

#

Anyone here using the plex server add-on? I'm wondering how i can access the plex server filesystem to add media to my library and to add plex add-ons.

#

@green heath Yes, the DuckDNS addon should be enough

green heath Jun 19, 2020, 1:49 AM

#

Thanks!

rotund thistle Jun 19, 2020, 2:18 AM

#

does anyone happen to have an example mqtt discovery config I could try? I am trying to get rtl-sdr devices and create discoverable devices

cunning wolf Jun 19, 2020, 7:15 AM

#

@rotund thistle You'll get more help with integrations over in #integrations-archived 😉

dense spadeBOT Jun 19, 2020, 8:14 AM

#

@hollow crater posted a code wall, it is moved here --> https://paste.ubuntu.com/p/Htdz3fTQ5S/

weary stratus Jun 19, 2020, 8:45 AM

#

I do have a PPPoE type of internet connection and I'm trying to set up remote access. Do I need to take any extra steps for proper port forwarding? The usual setup for duckdns add-on does not work...

tardy apex Jun 19, 2020, 10:09 AM

#

can anyone explain to me why HACS is not an add-on downloadable within home assistant?

whole fjord Jun 19, 2020, 10:12 AM

#

hi guys, i cant' get the nodered dashboard to appear,,, always a blank page... looking at source, there's stuff in there, but nothing displayes on browser... any suggestion?

dark yoke Jun 19, 2020, 10:17 AM

#

@tardy apex https://hacs.xyz/docs/faq/addons

HACS: Add-ons?

NO, no, nope, this is not an add-on, and does not handle add-ons

tardy apex Jun 19, 2020, 10:18 AM

#

It feels like it is an add-on though, and it does not handle add-ons, it handles custom components. Its an add on the manage custom components. am i missing something? :S

dark yoke Jun 19, 2020, 10:19 AM

#

It's an integration

#

Not a add-on

#

Big difference in how they operate, and who can use it

primal cape Jun 19, 2020, 11:32 AM

#

Hey, with the simple DHCP server, does it allow you to list the devices connected on a dashboard?

lyric hawk Jun 19, 2020, 12:39 PM

#

Be careful, a DHCP Server doesn't know who's connected. It knows how has asked for a IP and when. Set a low lease time can help you but can also a problem. If you really wanna know your devices connected to your network, you need intelligent switches and a router providing more infos

#

I use mikrotik everywhere and can "See" it all

primal cape Jun 19, 2020, 12:40 PM

#

Figured as much. I'm thinking about replacing my ISP router at some point, I'll have to look for a decent one to get some HA integration

lyric hawk Jun 19, 2020, 12:42 PM

#

Have a look at mikrotik :-) be careful, it is a mighty one and you need to configure much

#

And it's quite cheap, in my opinion

primal cape Jun 19, 2020, 12:44 PM

#

I don't mind the configuring part, so long as it's not purely coding and there's some webUI just to make it a little easier

lyric hawk Jun 19, 2020, 12:46 PM

#

👌

primal cape Jun 19, 2020, 12:47 PM

#

Thanks

urban mauve Jun 19, 2020, 1:34 PM

#

I can't get HACS installed in Home Assistant.
Does anyone have an idea why I can't add them to integrations?
The files are as written in the right place and in the good folder.

viscid orchid Jun 19, 2020, 2:23 PM

#

As mentioned above, HACS isn’t an addon.

#

https://discord.gg/Zy4RmJ

oak knoll Jun 19, 2020, 2:49 PM

#

Local tts: I've seen quite a bit of recent talk about Local TTS options in HomeAssistant. If you run Home-Assistant All-In-One (Previously Hassio), you've probably realized that there's not really any out-of-the-box options. There is however a working solution using a custom Home-Assistant Add-On + a HACS integration: see here for a quick tutorial on how i have it working on an All-In-One install: https://github.com/home-assistant/core/issues/24749#issuecomment-646670808

lapis radish Jun 19, 2020, 3:38 PM

#

Hey guys, when I try and install adguard home addon, it says error bad gateway. How do I fix this?

manic fox Jun 19, 2020, 3:50 PM

#

you get an error while installing adguard or when you run in a trying to view in UI?

lapis radish Jun 19, 2020, 4:41 PM

#

Both

#

2020/06/19 12:41:50 [info] AdGuard Home, version v0.102.0, channel release, arch linux amd64
2020/06/19 12:41:50 [info] Initializing auth module: /data/adguard/data/sessions.db
2020/06/19 12:41:50 [info] Auth: initialized.  users:0  sessions:0
2020/06/19 12:41:50 [info] Initialize web module
2020/06/19 12:41:50 [info] Bootstrap 0: 1.1.1.1:53
2020/06/19 12:41:50 [info] Upstream 0: https://dns10.quad9.net:443/dns-query
2020/06/19 12:41:50 [error] Couldn't load filter 1 contents due to stat /data/adguard/data/filters/1.txt: no such file or directory
2020/06/19 12:41:50 [info] Go to http://127.0.0.1:45158
2020/06/19 12:41:50 [info] Starting the DNS proxy server
2020/06/19 12:41:50 [info] Ratelimit is enabled and set to 20 rps
2020/06/19 12:41:50 [info] The server is configured to refuse ANY requests
2020/06/19 12:41:50 [info] DNS cache is enabled
2020/06/19 12:41:50 [info] Creating the UDP server socket
2020/06/19 12:41:50 [fatal] Couldn't start forwarding DNS server, cause: couldn't listen to UDP socket, cause: listen udp 0.0.0.0:53: bind: address already in use```

cunning wolf Jun 19, 2020, 4:42 PM

#

address already in use

lapis radish Jun 19, 2020, 4:42 PM

#

And then this restarts all over again

cunning wolf Jun 19, 2020, 4:42 PM

#

You already have something set up on that port.

lapis radish Jun 19, 2020, 4:42 PM

#

But ive changed that

cunning wolf Jun 19, 2020, 4:43 PM

#

Don't just blindly change things. Find out what else you have operating on that port.

lapis radish Jun 19, 2020, 4:43 PM

#

Ok, could it just be other add ons or something else?

cunning wolf Jun 19, 2020, 4:44 PM

#

Given port 53 is for DNS, it seems likely you have multiple DNS addons installed.

lapis radish Jun 19, 2020, 4:45 PM

#

Thats weird, I didnt think I did, unless theres multiple uses for an add-on

#

I have adguard home, file editor, samba share, aircast, mqtt broker, spotify connect, app daemon 4, and node red

#

I tried a while ago making a DNS server on one of my other home servers, but its not on the same IPas home assistant. Coult that be the problem?

cunning wolf Jun 19, 2020, 4:48 PM

#

Another home server? Virtual machine on the same host?

lapis radish Jun 19, 2020, 4:49 PM

#

Yeah

cunning wolf Jun 19, 2020, 4:49 PM

#

Can you stop it for a while and try restarting AdGuard on HA?

lapis radish Jun 19, 2020, 4:49 PM

#

But I thought they were different IPs so it didnt matter

#

Sure

#

Still says address already in use

cunning wolf Jun 19, 2020, 5:02 PM

#

Then you need to find out what else is using it

sly kindle Jun 19, 2020, 5:23 PM

#

@lapis radish something on your OS, which isn't HassOS I assume

lyric hawk Jun 19, 2020, 6:36 PM

#

Different ips in the container, but it bind to a port from os to forward the data to the adguard container. This fails. AS cogneato says, some dns Server on your os or another container with DNS....

sly kindle Jun 19, 2020, 6:39 PM

#

https://ptb.discordapp.com/channels/330944238910963714/672220642099200000/673899518030249984

foggy sphinx Jun 19, 2020, 6:40 PM

#

I'm trying to install 3rd party addon using supervisor GUI. I'm getting this error "[supervisor.docker.addon] Can't build local/armv7-addon-ruuvitag:0.3.0: The command '/bin/ash -o pipefail -c apk add --no-cache python build-base yarn git' returned a non-zero code: 1"

#

Where is the script originating from? /bin/ash doesn't look right...

#

or is it actually supposed to use /bin/ash? 😄

cunning wolf Jun 19, 2020, 6:58 PM

#

/bin/ash is correct for Hassio

foggy sphinx Jun 19, 2020, 7:21 PM

#

ok, any idea how to get verbose output of that installation?

cunning wolf Jun 19, 2020, 7:32 PM

#

You'll want to ask in #330990055533576204

sly kindle Jun 19, 2020, 7:33 PM

#

I'd say check with the dev of this addon

cunning wolf Jun 19, 2020, 7:33 PM

#

Or that 😄

foggy sphinx Jun 19, 2020, 7:45 PM

#

mmm.. don't actually need that addon right now as same functionality is already running, just not managed by supervisor and not dockerised

#

so time to shoot message and see if it ever gets reply 😛

uneven pine Jun 19, 2020, 8:08 PM

#

I’m trying to use ESPHome, but it won’t detect the usb. Does anyone know what I should do. Ive already restarted the add on switched cables, switched ports and tried two nodemcus

#

Worth noting that my wyze hub works

cunning wolf Jun 19, 2020, 8:21 PM

#

You mean the ESPHome addon can't detect an ESP device connected via USB?

uneven pine Jun 19, 2020, 8:47 PM

#

Yep

#

It won’t give the usb as a option to update/set it up

#

Just ota

cunning wolf Jun 19, 2020, 8:53 PM

#

What device are you trying to flash?

uneven pine Jun 19, 2020, 8:53 PM

#

It’s a nodemcu 8266

cunning wolf Jun 19, 2020, 8:56 PM

#

Did you hit the 'flash' button?

#

On the board, that is.

uneven pine Jun 19, 2020, 8:57 PM

#

I’ll try that. I know I pressed it at one point but not sure when.
When should I do that in the process?

cunning wolf Jun 19, 2020, 8:57 PM

#

I've not actually used a NodeMCU but I'd guess... plug in, briefly press 'flash', then see what the addon says.

uneven pine Jun 19, 2020, 8:58 PM

#

Got it, I’ll give it a shot thanks!

cunning wolf Jun 19, 2020, 8:58 PM

#

You should get a dropdown listing devices, like so: http://prntscr.com/t2zmsp

#

(that's not an ESP device but it happens to be connected right now 😄 )

uneven pine Jun 19, 2020, 8:58 PM

#

Cool

uneven pine Jun 19, 2020, 11:03 PM

#

It works! Thanks!

echo knoll Jun 20, 2020, 12:50 AM

#

I don't understand the documentation for nanoleaf
It say to enable component discovery, but I don't see nanoleaf as been part of the list of compartible devices

calm flint Jun 20, 2020, 4:18 AM

#

is there a way to change the url that appdaemon uses to open the webui?

dusty mica Jun 20, 2020, 5:09 AM

#

Is there a way to run the configurator from the add-on store in standalone mode? I never use the left side with all of the HA stuff. I run hassio with hassOS and my installation type is Home Assistant.

viscid orchid Jun 20, 2020, 5:11 AM

#

sure, add a port in the configuration section

wind tree Jun 20, 2020, 10:57 AM

#

anyone using "template-entity-row" ? I use the following code: https://pastebin.com/MGqcR2E0

#

it evaluates great when I edit the card, but not automatically. What am I missing ?

cunning wolf Jun 20, 2020, 11:00 AM

#

Custom cards aren't addons. Try in #frontend-archived 🙂

wind tree Jun 20, 2020, 11:00 AM

#

sorry, moving there

mortal moth Jun 20, 2020, 2:19 PM

#

I am trying to setup a group of zigbee devices in zigbee2mqtt that then show up as a single device (or perhaps entity) in Home Assistant.

#

I have figured out how to define the group in zigbee2mqtt. But on adding the group to Home Assistant following the example at https://www.zigbee2mqtt.io/integration/home_assistant.html I get an error when I Reload Groups.

#

My config in Home Assistant groups.yaml

#

garden_sconce_lamps:
name: Garden Sconce Lamps

platform: mqtt
schema: json
name: garden_sconce_lamps
command_topic: "zigbee2mqtt/garden_sconce_lamps/set"
state_topic: "zigbee2mqtt/garden_sconce_lamps"
brightness: true

#

Error message when doing Check Configuration:

#

Invalid config for [group]: value should be a string for dictionary value @ data['group']['garden_sconce_lamps']['entities']. Got None. (See /config/configuration.yaml, line 17).

#

Ok - I've figured out where I went wrong. This needs to go in configuration.yaml as it isn't a group as far as Home Assistant is concerned. The lamps are grouped in zigbee2mqtt, and Home Assistant needs to be told there is a light entity in its configuration.

marble kayak Jun 20, 2020, 4:45 PM

#

Hey I'm having trouble with influxdb using up a lot of swap. While it typically sits at 60% without influx running, as soon as I get it going I max out and am at the ceiling for most of the time. Is this just a result of running influxdb on a pi 3+? Or is there something I can do about it?

chrome summit Jun 20, 2020, 6:24 PM

#

Hi all, I'm about to boil my head 😡 to get some relief from days of struggling to get Mosquitto, ha and an ESP8266 device working ! Stupid thing is that I had it working a year or so ago. Basically, no matter what I try I can't get the Mosquitto broker to add my single ESP8266 switch. I've watched countless ha/mqtt videos, scoured posts just about everywhere. Would someone PLEASE take a look at my code/configs and offer some pointers? Here are my config files: https://paste.ubuntu.com/p/jXThhKhTGv/

chrome tusk Jun 20, 2020, 6:25 PM

#

Hi @raven tinsel, back again to say thank you for your YouTube video you released on how to set up and install WireGuard. It's running perfectly! I even managed to get WireGuard working on an older Mac running macOS 10.13.

raven tinsel Jun 20, 2020, 6:26 PM

#

👍 Thanks @chrome tusk 😄

chrome tusk Jun 20, 2020, 6:26 PM

#

I just noticed you were using IDE, but I noticed it's being deprecated. Has a suitable replacement for Raspberry Pi been released yet?

cunning wolf Jun 20, 2020, 7:09 PM

#

@chrome summit I'd suggest asking on the ESP8266 server if you're actually trying to code one. Alternatively, I'd recommend looking into ESPHome and using that instead - ESPHome integrates well with HA without having to do any custom code.

chrome summit Jun 20, 2020, 7:14 PM

#

@cunning wolf Thank you for your reply. I was getting to the point of forgetting mqtt, despite having it all working previously; I guess alot has changed in the time since. I think I wil try ESPHome if it is well integrated. Thanks for the advice.

bronze yacht Jun 20, 2020, 8:16 PM

#

Is there any way to get the SQLite Web add-on to load a database that's not in /config/? I really need to access the matrix.db and cannot find any other way to do it.

wise dirge Jun 20, 2020, 8:36 PM

#

Hey, im considering makeing a zeek/snort container/addon but im not sure how to make a tab of all traffic going to my hassio pi

unreal shale Jun 20, 2020, 8:59 PM

#

Hi, I just finished setting up a new instance of HA on Ubuntu via docker. When i try to install an add-on it say "Failed to install addon, Unknown Error, see logs". I don't see anything in the logs related to this...

covert arch Jun 20, 2020, 10:31 PM

#

anybody know why I get my glances data to influx but grafana doesn't display any?

#

https://imgur.com/MZiI6DF
https://imgur.com/CHbJXOX

sly kindle Jun 20, 2020, 10:54 PM

#

@unreal shale supervisor logs, not home assistant logs

cobalt ice Jun 20, 2020, 10:59 PM

#

@covert arch how does the grafana query look?

covert arch Jun 20, 2020, 11:00 PM

#

@cobalt ice
I use the default glances dashboard
https://grafana.com/grafana/dashboards/2387

#

https://youtu.be/m9qIqq104as?t=612

cobalt ice Jun 20, 2020, 11:09 PM

#

@covert arch You did select the glances db when importing that dashboard right? Only other difference I can see is for influx query, tutorial uses localhost.load and you have homeassistant.load.
Otherwise someone with more knowledge needs to help 🙂

covert arch Jun 20, 2020, 11:11 PM

#

yep, I configured prefix: homeassistant in glances addon, will try using the default localhost now but it shouldn't matter :/ and yes the glances db was selected

cobalt ice Jun 20, 2020, 11:12 PM

#

grafana (using the preset) might be configured for localhost. you could change it there but has to be done for every graph i think.

covert arch Jun 20, 2020, 11:14 PM

#

yep seems like it, graphs show up when using localhost.. thanks

#

https://imgur.com/a/jv6DgZr
even though it would be selectable.. handgesture

frozen herald Jun 20, 2020, 11:30 PM

#

Hi all. Anyone else had their Meteorologisk weather break. I am seeing 203 which indicates an outdated API. I tried to delete the integration and re-add it, but no joy.

viscid orchid Jun 20, 2020, 11:37 PM

#

fixed in latest HA

#

integration, not add-on

weary stratus Jun 21, 2020, 8:17 AM

#

hi, where i could post to ask an evolution to solaredge API add-on ? (need some more request to get auto-consumption field) ?

raven tinsel Jun 21, 2020, 9:38 AM

#

@weary stratus Add-on or integration?

unreal shale Jun 21, 2020, 11:16 AM

#

this is the error I get when I try to install an add on.

20-06-20 20:31:12 ERROR (SyncWorker_14) [supervisor.docker.interface] Can't install homeassistant/amd64-addon-mosquitto:5.1 -> 500 Server Error: Internal Server Error ("Get https://registry-1.docker.io/v2/: dial tcp: lookup registry-1.docker.io: Temporary failure in name resolution").

steep birch Jun 21, 2020, 2:33 PM

#

Can someone help me? I've changed a friendly name in zigbee2mqtt but not it refuses the boot. Aparently a # is not allowed in friendly names... woops. How can I change it now?

weary stratus Jun 21, 2020, 4:26 PM

#

@weary stratus Add-on or integration?
@raven tinsel integration

raven tinsel Jun 21, 2020, 4:26 PM

#

Feature request section on the community forums @weary stratus

weary stratus Jun 21, 2020, 4:36 PM

#

Feature request section on the community forums @weary stratus
@raven tinsel ok thanks i will do that

lament fiber Jun 21, 2020, 9:27 PM

#

Hello! I am trying to use the mini-graph-card, but when using group_by date, I only get the last day values. Using hour instead shows the correct data.
Here is the config:
type: 'custom:mini-graph-card'
aggregate_func: last
entities:

entity: sensor.fred_daily_milk_consumption
group_by: date
hours_to_show: 120
name: Consommation de lait de Frédérique
cache: false
show:
graph: bar
icon: false
labels: true
unit: Onces

#

It shows 0 for all days except the current day where I get correct value

#

I am using the latest version

viscid orchid Jun 21, 2020, 9:32 PM

#

This is a #frontend-archived question

dense spadeBOT Jun 21, 2020, 9:32 PM

#

Please use https://paste.ubuntu.com/ or https://www.hastebin.com/ to share code or logs.

cunning wolf Jun 21, 2020, 9:33 PM

#

When you get to #frontend-archived , of course. Not here 😄

viscid orchid Jun 21, 2020, 9:33 PM

#

that too

lament fiber Jun 21, 2020, 9:33 PM

#

ha ok I searched for "mini-graph-card" and saw discussions here 🙂

cunning wolf Jun 21, 2020, 9:33 PM

#

No, cards aren't addons.

lament fiber Jun 21, 2020, 9:33 PM

#

will move to frontend

#

thanks

harsh mortar Jun 22, 2020, 1:23 AM

#

Anyone run into an issue where ESPHome wont load in Home Assistant?
Gets stuck at loading nginx in the log

#

Been there for over a hour. It's weird that its getting stuck. I don't get any other logs from anywhere to give me any sort of a clue where to look or what to do next. I've already removed the addon and reinstalled. Even tried going to the beta, still same results.

bold spire Jun 22, 2020, 7:19 AM

#

Anyone run into an issue where ESPHome wont load in Home Assistant?
Gets stuck at loading nginx in the log
@harsh mortar Can't say I've ever seen that one before, did you get it working? Did you check the docker container logs?

modern hound Jun 22, 2020, 9:32 AM

#

I'm starting with Node Red. Using the latest version and added the Node red Addon no problem. When I try and add an entity though I see this "Attention: This node requires Node-RED custom integration to be installed in Home Assistant for it to function." in the entity editor page. Feels like something did not install correctly or is there other setup I need to do. The docs page doesn't point me at anything so cannot work out why this is there.

bold spire Jun 22, 2020, 9:50 AM

#

I'm starting with Node Red. Using the latest version and added the Node red Addon no problem. When I try and add an entity though I see this "Attention: This node requires Node-RED custom integration to be installed in Home Assistant for it to function." in the entity editor page. Feels like something did not install correctly or is there other setup I need to do. The docs page doesn't point me at anything so cannot work out why this is there.
@modern hound That message says you need to install this add-on: https://github.com/zachowj/hass-node-red for it to function. It's available through HACS if you use that.

opal meadow Jun 22, 2020, 12:19 PM

#

I am trying to find a way to cast music from Spotify to both a google home speaker group and to a rasp pi running music box at the same time. I have gotten both the google home speaker group and the rasp pi music box to be detected in home assistant and I have grouped them together. I can address this group using the text to speech bar and I can hear the output play back across all the devices in sync. I now just need to find a way to play Spotify across this group. I have installed the Spotify connect addon and the Spotify integration. I can see 'Home assistant' listed as a speaker i can output to in Spotify however, when i select it i can not then hear the music, once i plug headphones into the rasp pi running home assistant i can then hear the audio, does anyone know of a way i can output this audio to the speakers previously mentioned instead of the built in 3.5mm jack. I have tried changing this option in the Spotify connect GUI however i only have the two option 'default' and 'build in audio' any help would be greatly appreciated. Thank you.

plush loom Jun 22, 2020, 12:45 PM

#

how do I come up with a good openzwave security 16byte key

dark yoke Jun 22, 2020, 12:51 PM

#

open vi
try to get out of it

#

if that does not work, do what the documenation say

plush loom Jun 22, 2020, 2:02 PM

#

Well so Im following the documentation, but im concerned the 16byte key I generate, wont match the zwave network key that was made for me with the integration.

bold spire Jun 22, 2020, 3:10 PM

#

@crisp minnow Did you try restarting the add-on?

covert arch Jun 22, 2020, 3:57 PM

#

how can I enable the collectd configuration for the influxdb addon?

harsh mortar Jun 22, 2020, 6:23 PM

#

@bold spire I've looked at all logs that I can find and Can not find any useful information.

somber lion Jun 22, 2020, 6:56 PM

#

Hi guys, I'm using Home Assistant Add-on: Mosquitto broker I don't find settings related to websockets. It doesn't support that?

dense spadeBOT Jun 22, 2020, 7:19 PM

#

@unborn lichen posted a code wall, it is moved here --> https://paste.ubuntu.com/p/wJPhTRNkCv/

unborn lichen Jun 22, 2020, 7:22 PM

#

I must have badly formatted my question on MQTT add-on🙁 HassBot decided it was all code😟 https://paste.ubuntu.com/p/wJPhTRNkCv/

cunning wolf Jun 22, 2020, 7:23 PM

#

It decided it was too long. It doesn't care what's code and what's not.

#

It also shared the link already, you don't need to repeat it.

#

What's your config for the mqtt integration?

unborn lichen Jun 22, 2020, 7:29 PM

#

default with one username/ password added

cunning wolf Jun 22, 2020, 7:29 PM

#

Share it (you can hide the password)

dense spadeBOT Jun 22, 2020, 7:29 PM

#

Please use https://paste.ubuntu.com/ or https://www.hastebin.com/ to share code or logs.

cunning wolf Jun 22, 2020, 7:29 PM

#

And if you're worried about putting passwords in your config...

dense spadeBOT Jun 22, 2020, 7:29 PM

#

Rather than putting sensitive information (passwords, locations, etc) into your configuration, you can store them in secrets to make sharing easier.

unborn lichen Jun 22, 2020, 7:32 PM

#

https://paste.ubuntu.com/p/6QvHSgfc92/

cunning wolf Jun 22, 2020, 7:32 PM

#

Okay... that's your config for the addon. Now share the config for the integration, like I asked.

#

It's the bit you should have added to configuration.yaml

unborn lichen Jun 22, 2020, 7:35 PM

#

OK - that's likely the problem - I though it was all done through the UI now. I'll go and learn some more. Thanks for the pointer

dense spadeBOT Jun 22, 2020, 7:35 PM

#

https://www.home-assistant.io/docs/mqtt/
https://www.home-assistant.io/integrations/mqtt/
https://www.home-assistant.io/blog/categories/mqtt/

cunning wolf Jun 22, 2020, 7:35 PM

#

Second one is the one you need to set up... but reading the others is a good idea if you're new to MQTT and HA.

#

You can use the UI, just make sure you've done it right.

#

You'll end up with something like this, where the address of your broker matches the location of the addon (probably the same IP address as your HA), and your username and password match:

mqtt:
  username: !secret mqtt_broker_username
  password: !secret mqtt_broker_password
  broker: 192.168.1.21
  discovery: true
  discovery_prefix: homeassistant```

unborn lichen Jun 22, 2020, 7:42 PM

#

Thanks again. The only setting showing on the Integration page is discovery option. I'll go back to the configuration.yaml route

modern hound Jun 22, 2020, 7:50 PM

#

@modern hound That message says you need to install this add-on: https://github.com/zachowj/hass-node-red for it to function. It's available through HACS if you use that.
@bold spire Many thanks, I had thought it would be embedded in the HASSIO style way of installing now. I will go and give that a try. Maybe something went slightly wrong when I installed Node Red.

sly kindle Jun 22, 2020, 10:37 PM

#

@modern hound it's the specific HA entity node you selected which requires the extra custom integration

dusty mica Jun 23, 2020, 1:36 AM

#

Is there a way to run the configurator from the add-on store in standalone mode? I never use the left side with all of the HA stuff. I run hassio with hassOS and my installation type is Home Assistant.
https://community.home-assistant.io/t/any-way-to-remove-the-left-panel-in-hass-configurator-on-a-hassio-installation/135828

lethal fiber Jun 23, 2020, 2:41 AM

#

Using either Putty or WinSCP I get connection refused from HA (with either of the SSH addon's) I see the following in the HA console:
“nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not fund. Use the iptables CT target to attach helpers instead.” Ping works. Any suggestions?

viscid orchid Jun 23, 2020, 3:03 AM

#

@dusty mica When you say "standalone" mode, you just mean accessing it via a separate port in your browser?

#

if so, yes. Just enter a port in the Configuration section of the add-on

dusty mica Jun 23, 2020, 3:21 AM

#

@viscid orchid Would it just be “port: 81239” without quotes?

viscid orchid Jun 23, 2020, 3:23 AM

#

It’s just a text field, so it’s give it a number

#

It’s in the network section below the bigger config box

dusty mica Jun 23, 2020, 3:30 AM

#

There’s something I’m not understanding.
Here’s my config for the file editor “configurator” add-on. dirstfirst: false enforce_basepath: true ignore_pattern: ssh_keys: [] I don’t see a network section. Are we talking about the same thing?

viscid orchid Jun 23, 2020, 3:34 AM

#

It’s just below that

#

What version of HA are you using?

#

Scroll the screen a bit?

dusty mica Jun 23, 2020, 3:35 AM

#

0.111.4

viscid orchid Jun 23, 2020, 3:36 AM

#

It’s literally just below that text box

dusty mica Jun 23, 2020, 3:37 AM

#

That is the only part on the screen, there’s nothing to scroll down to. I did look in the other tabs and am not seeing anything.😅

#

I wish I can show you what I see

viscid orchid Jun 23, 2020, 3:38 AM

#

https://imgur.com/gallery/4y2hN8F

dense spadeBOT Jun 23, 2020, 3:38 AM

#

Please use imgur or other image sharing web sites, and share the link here.

viscid orchid Jun 23, 2020, 3:41 AM

#

Anything?

dusty mica Jun 23, 2020, 3:42 AM

#

One second I haven’t used imgur before🤦‍♂️

viscid orchid Jun 23, 2020, 3:42 AM

#

You see my image?

dusty mica Jun 23, 2020, 3:44 AM

#

Ya, that’s not showing on mine

viscid orchid Jun 23, 2020, 3:45 AM

#

ah, that might be from a legacy installation

#

I see this in the docs:

#

Known issues and limitations
This add-on can only be used via Ingress and has no direct access.

#

so there ya go

#

I probably set a port and it's now confused

#

I haven't tried to access it that way in quite some time and just looked for the port

#

ha, I hit "reset to default" on that section and it immediately disappeared 🙂

#

so, in summary, no

#

apologies for the misguidance

dusty mica Jun 23, 2020, 3:48 AM

#

Ok, so in the documentation of the non add-on configurator I saw that you can remove the hass api by running it is “stand-alone ” more. So there’s not any stand alone mode in the add-on then?

viscid orchid Jun 23, 2020, 3:49 AM

#

you can find the container separately and run it that way

#

it just wouldn't be the addon

dusty mica Jun 23, 2020, 3:49 AM

#

oh cool

#

Sorry for the waste of time😅

viscid orchid Jun 23, 2020, 3:51 AM

#

this seems to point you in the right direction: https://www.reddit.com/r/homeassistant/comments/cipi1k/need_help_with_ha_and_hassconfigurator_in_docker/

dusty mica Jun 23, 2020, 3:52 AM

#

Thanks!

viscid orchid Jun 23, 2020, 3:52 AM

#

you may need to poke around a bit to see if that's the latest docker image

dusty mica Jun 23, 2020, 3:56 AM

#

I’ll go try that out! Thanks for the help

dusty mica Jun 23, 2020, 5:09 AM

#

@viscid orchid I was able to get it working and was able to change the setting that I needed to change! Thank you so much for that last link!!!

lethal fiber Jun 23, 2020, 6:43 AM

#

Earlier: Using either Putty or WinSCP I get connection refused from HA (with either of the SSH addon's) I see the following in the HA console:
“nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not fund. Use the iptables CT target to attach helpers instead.” Ping works. Running HA under VirtualBox. Any suggestions? Anyway to install an older version of SSH & Web Terminal ?

atomic stone Jun 23, 2020, 6:12 PM

#

how can I tell if motion eye can use hardware acceleration with hass OS?

low cliff Jun 23, 2020, 7:01 PM

#

I installed Mosquitto from the Addon browser, when starting it and looking at the logs it references the mosquitto.conf file being located at /etc/mosquitto.conf. When I browse to /etc/ I see no mosquitto.conf. Is there something I am missing?

viscid orchid Jun 23, 2020, 7:09 PM

#

It’s in its own container. You’re not supposed to mess with it

low cliff Jun 23, 2020, 7:09 PM

#

Ah, got it.

#

I'm trying to follow a guide where it says to set up a bridge to the MQTT broker on the energy bridge by adding
connection dte address <IP_OF_BRIDGE>:2883 remote_username admin remote_password trinity clientid homeassistant-1 try_private false start_type automatic topic # both 0

#

Where would I put that?

cunning wolf Jun 23, 2020, 7:14 PM

#

A bridge to the broker? Then it doesn't sound like you want to set that up on the broker.

#

Your wording suggests it's something you do on the energy bridge.

low cliff Jun 23, 2020, 7:15 PM

#

https://github.com/home-assistant/core/issues/20170#issuecomment-478752765

#

Is the link, I may be reading it wrong. I just started messing around with mqtt

viscid orchid Jun 23, 2020, 7:15 PM

#

The docs for the addon do let you specify additional conf files, so it does support that if you need it

cunning wolf Jun 23, 2020, 7:16 PM

#

setup a bridge to the MQTT broker on the energy bridge

low cliff Jun 23, 2020, 7:16 PM

#

Ah

#

Going to try the custom config.

#

Alright that got it connecting! Had to create dte.conf in /share/mosquitto/. Which I had already done but didn't realize I had to set the flag in the configuration to true so it sees the custom file.

cedar rover Jun 23, 2020, 7:50 PM

#

IF i installed duckdns, changed its config and also changed home url and internal url do i need to do more? I cant connect to my new url

#

ERR_CONNECTION_CLOSED

cedar rover Jun 23, 2020, 8:43 PM

#

no one?

cunning wolf Jun 23, 2020, 8:46 PM

#

Be patient 😉

cedar rover Jun 23, 2020, 8:49 PM

#

🙂

cunning wolf Jun 23, 2020, 8:49 PM

#

How are you trying to connect? What's the address and port? Are you connecting from inside or outside your home network?

cedar rover Jun 23, 2020, 8:52 PM

#

Inside but its also giving this error in the log files

#

Traceback (most recent call last):
File "/usr/local/lib/python3.7/site-packages/aiohttp/web_protocol.py", line 275, in data_received
messages, upgraded, tail = self._request_parser.feed_data(data)
File "aiohttp_http_parser.pyx", line 523, in aiohttp._http_parser.HttpParser.feed_data
aiohttp.http_exceptions.BadStatusLine: invalid HTTP method

cunning wolf Jun 23, 2020, 8:54 PM

#

You didn't answer my questions yet. Keep going.

cedar rover Jun 23, 2020, 8:56 PM

#

I am connecting from inside / or outside my network none of them are working on https://*duckdns.org

#

accessing by 192.168.178.4:8123 does work

cunning wolf Jun 23, 2020, 8:57 PM

#

http? https?

cedar rover Jun 23, 2020, 8:57 PM

#

https

cunning wolf Jun 23, 2020, 8:57 PM

#

Okay... check your ports are open. https://www.yougetsignal.com/tools/open-ports/

cedar rover Jun 23, 2020, 8:57 PM

#

they are open

#

It worked before

#

its just a clean install

#

Something fucked up happend last week and i just needed to start over 😦

cunning wolf Jun 23, 2020, 8:58 PM

#

Don't assume anything please. Have you checked your ports today?

cedar rover Jun 23, 2020, 8:58 PM

#

yes

#

i will look at it again

cunning wolf Jun 23, 2020, 8:59 PM

#

What ports are open and how are they forwarded?

cedar rover Jun 23, 2020, 9:00 PM

#

Hass.IO * 8123 192.168.178.4:8123
Hass.IO duckduck 443 192.168.178.4:8123
Hass.IO web * 8123 192.168.178.4:8123

cunning wolf Jun 23, 2020, 9:01 PM

#

And what results do you get from this? https://www.ssllabs.com/ssltest

cedar rover Jun 23, 2020, 9:01 PM

#

Assessment failed: No secure protocols supported

cunning wolf Jun 23, 2020, 9:02 PM

#

There we go then. You don't have a valid SSL cert for your domain

#

Everything else sounds okay. Try setting up the addon again. See if you're getting any errors in the addon's logs.

cedar rover Jun 23, 2020, 9:03 PM

#

INFO: Using main config file /data/workdir/config

Processing *****.duckdns.org

Checking domain name(s) of existing cert... unchanged.
Checking expire date of existing cert...
Valid till Sep 21 19:36:56 2020 GMT Certificate will not expire

#

(Longer than 30 days). Skipping renew!

cunning wolf Jun 23, 2020, 9:04 PM

#

Hmm, odd. And the address it mentioned there matches the one you're trying to access?

cedar rover Jun 23, 2020, 9:04 PM

#

yep

#

maybe trying a new subdomain will help

cunning wolf Jun 23, 2020, 9:05 PM

#

Yeah, it can't hurt to try. If that works, maybe delete your certs and start again.

cedar rover Jun 23, 2020, 9:06 PM

#

Alright

dense spadeBOT Jun 23, 2020, 9:09 PM

#

@cedar rover posted a code wall, it is moved here --> https://paste.ubuntu.com/p/KpBhWPCg2d/

cedar rover Jun 23, 2020, 9:11 PM

#

to bad

#

it doenst work either

#

something is definably wrong

cunning wolf Jun 23, 2020, 9:13 PM

#

Yeah, there's something funky going on there if it does the whole challenge and claims to have created a cert.

#

I don't use that addon, so hang tight and someone else might jump in.

cedar rover Jun 23, 2020, 9:15 PM

#

i hope so its driving me crazy for the past days 🙂

tawdry sluice Jun 23, 2020, 11:21 PM

#

Hi everyone!!!!
I am running the vmdk virtual appliance of home assistant core. I am trying to install HACS but the samba addon doesnt start and I have no ssh to virtual appliance's file system access. I only have access to the config files on text editor visual studio code. Am I missing something here? Any help would appreciated it!

sly kindle Jun 23, 2020, 11:21 PM

#

@tawdry sluice it won't start if you don't configure a password

tawdry sluice Jun 23, 2020, 11:25 PM

#

ohhhhhh...I will try again. Thank you!

#

Where does the password get configured? I dont see where.

#

Never mind

#

its was in the configuration tab

#

the layout change tripped me up

#

thank you!!!

odd saddle Jun 24, 2020, 2:48 AM

#

hey guys im super new to home assistant, this is my 1st project. is anyone willing to help me get my Adguard working properly? i think im almost there!

viscid orchid Jun 24, 2020, 3:36 AM

#

Better to ask about what’s not working so that others can help

odd saddle Jun 24, 2020, 7:51 AM

#

I've been messing around with my networking settings trying to get adguard to work properly, but now it looks like my wifi isnt working properly!

hallow raven Jun 24, 2020, 9:58 AM

#

I use the Homeatic add-on and get this issue

#

One of the Homematic devices is not responding.
This may have various reasons:

there is no network connection
the power supply to the CCU is interrupted
at least one device of the HomeMatic CCU is down
Please check the network connection and the power supply to the HomeMatic CCU. If necessary, restart your HomeMatic CCU```

#

An internal error was detected in the service software. The diagnostics are being emailed to the service system administrator (root).

#

what should I do now?

gritty citrus Jun 24, 2020, 10:29 AM

#

in Gorcy when i try and add a product it gives me an error 404
https://pastebin.com/6GYEV6VZ

south crest Jun 24, 2020, 10:42 AM

#

Hi i just installed the adb server addon and added my tv’s ip in the devices config. I added this:
media_player:

platform: androidtv
host: 192.168.2.10
name: "Sony Bravia TV"
adb_server_ip: 127.0.0.1
adb_server_port: 5037
To my configuratiom.yaml but its not working
If i use adb connect 192.168.2.10 in cmd on my pc it does connect (also the tv asks perms which it doesnt with the hassio addon) does anyone know what i am doing wrong?

cunning wolf Jun 24, 2020, 11:29 AM

#

'not working' doesn't tell us much.

dense spadeBOT Jun 24, 2020, 11:29 AM

#

If you're having problems with your updates to your configuration:

Check the troubleshooting steps
Check your log file - remembering you may need to set logger to info or debug
Explain what the problem you're having is - sharing configuration, errors, and logs

hallow raven Jun 24, 2020, 11:36 AM

#

I use the Homeatic add-on and get this issue, if I start it.

One of the Homematic devices is not responding.
This may have various reasons:

there is no network connection
the power supply to the CCU is interrupted
at least one device of the HomeMatic CCU is down
Please check the network connection and the power supply to the HomeMatic CCU. If necessary, restart your HomeMatic CCU```

```An internal error was detected in the service software. The diagnostics are being emailed to the service system administrator (root).```
What should I do now?

south crest Jun 24, 2020, 12:17 PM

#

@cunning wolf in the addon logs it says its connected but its not creating an entity

idle geyser Jun 24, 2020, 12:44 PM

#

hi, anyone knows, how to connect DeConz to node red?

weary stratus Jun 24, 2020, 2:30 PM

#

hello, i'm new on HA and i want to add a component which has been newly updated on Github - yesterday - (solaredge - branch dev) i have already installed solaredge with Integration but this is the "old" version , and i want to test this new release of the component - i don't know how ? thanks for help

neat wing Jun 24, 2020, 5:46 PM

#

Hi everyone, I have problems with a hue dimmable light that starts in "On" after power failure. Apparently, it is a bug in the deCONZ GUI that prevents you from setting the attribute via the interface (write failed). It should be possible to get around by editing the general.xml file which should be under / usr / share / deCONZ / zcl / but cannot find that folder. I run deCONZ as an addon to Hass.IO. I have tried looking in the mapping of the data folder in Docker but there it isn’t. I have also browsed the hassio directory in terminal with no success. Anyone know where I can find the file?

cedar rover Jun 24, 2020, 7:34 PM

#

How do i change deconz IP adress? its on another subnet and i cant get any valid api key

bold canyon Jun 24, 2020, 7:36 PM

#

Hi Everyone. I'll looking to start a conversation with anyone that can assist in explaining MQTT brokers and bridges to me.

I'm new to HA and MQTT and struggling to find info that explains how to set it up in HA.

PS. I'm running HASSOS on a VM installed via OVA/VMDK
My goal is to connect a smart TV that is running a Broker to HA.
All the info i found thus far seems like i need to edit mosquitto.conf that i can't find anywhere.

Even if there is some form of a file structure document, that will also already help.

sly kindle Jun 24, 2020, 8:24 PM

#

@bold canyon the tv is running a broker? Or it's an mqtt client?

bold canyon Jun 24, 2020, 8:25 PM

#

Hi. It's a broker

#

i used MQTT Explorer to connect to it

sly kindle Jun 24, 2020, 8:26 PM

#

I suppose you could point HA to this broker through the integrations page

bold canyon Jun 24, 2020, 8:27 PM

#

that is what i'm trying to do (not sure how thou)
This is the link/doc i got to and they talking about setting up a bridge

#

https://community.home-assistant.io/t/hisense-tv-control/97638/16

#

and to setup a bridge it would seem i need to change/add/update the mosquitto.conf but can't seem to find it anywhere.

#

what i'm trying now is to add the info to Supervisor > mosquitto broker > configuration. Not sure if that is the right place, but seems like it could be

cunning wolf Jun 24, 2020, 8:41 PM

#

If you're supposed to add files for the addon to read, some addons look for files in the /share folder on your HA host.

#

Here's your steps, @bold canyon : https://community.home-assistant.io/t/solved-mqtt-over-internet-aka-how-to-set-up-cloudmqtt-bridge-with-hassio-mosquitto-broker/49939/8

#

Googling is hard...

bold canyon Jun 24, 2020, 8:55 PM

#

@cunning wolf thank you for the link. Will check it out now

cunning wolf Jun 24, 2020, 8:55 PM

#

What goes into the file is probably specific to your device... but that post looks promising for putting the file somewhere Mosquitto can get to it.

bold canyon Jun 24, 2020, 10:05 PM

#

@cunning wolf Thank you very much for that post, looks like it worked. I was expecting to find mosquitto/mosquitto.conf under the share folder and when /share was empty i assumed it's the wrong place.

Now just to sort out the certificate issues

jovial thicket Jun 25, 2020, 10:35 AM

#

anyone got ultrasonic sensor sr04t to work with esphome on esp32 nodemcu?

#

the info i got from google are all esp8266

#

its only giving me timeout msg

foggy sage Jun 25, 2020, 10:54 AM

#

i am trying to setup ESP in HA, using https://www.juanmtech.com/how-to-get-started-with-esphome-and-sonoff/ this guide. He is portforward some port in the router. i maybe stuped, but what is the ip of the ESP, using usb in to RPI. is it the same as RPI, wont the be ip conflikt

jovial thicket Jun 25, 2020, 11:01 AM

#

u mean esphome?

foggy sage Jun 25, 2020, 11:02 AM

#

yes, the guide showing i need to portforward

jovial thicket Jun 25, 2020, 11:02 AM

#

have you installed the addon?

#

i dont remember have to port forward

#

have=having

foggy sage Jun 25, 2020, 11:04 AM

#

mmm maybe i dont need to open one. I just testing to upload some random sensor, and its sems to be working anyway. EDIT: no i cant find the ip:/

jovial thicket Jun 25, 2020, 11:05 AM

#

ip of which device?

foggy sage Jun 25, 2020, 11:06 AM

#

the ip to esp, i cant detect in HA

#

its just offline and when tryint to upload i get: Cant find ip adress

jovial thicket Jun 25, 2020, 11:07 AM

#

what device are you trying to connect? have you flash your device with esphome?

#

you will not be able to flash OTA unless you flash your device manually first

#

if you have flashed the device then HA should detect it automatically or you can go to your router settings to find out the ip

foggy sage Jun 25, 2020, 11:12 AM

#

will look in to i more later, need to go to work, thanks for the help:D have a good day

grave island Jun 25, 2020, 12:07 PM

#

Hi folks, I'm running the Mosquitto Add-In. I want to configure this to bridge all homeassistant mqtt events out to another mqtt broker. I can connect to mosquitto locally, and see all my events (using stateStream), but I do not know how to configure the Mosquitto Add-In for a Bridge setup. I don't see the mostquitto config file available to the add-in docker container

#

I can see mosquitto.conf in /usr/share/hassio/addons/core/mosquitto/data from the host running Home Assistant. But the volumes mounted to the AddOn don't include that path

#

Should I be modifying the mosquitto.conf within the AddOn Container, located in /etc/mosquitto/ (if so - won't that config be lost if the container is replaced?)

cunning wolf Jun 25, 2020, 12:31 PM

#

Use the search. This is a question that comes up all the time.

leaden nest Jun 25, 2020, 12:34 PM

#

I just tried to install Samba; installation done and configured, but it doesn't pop up on my windows PC

#

(workgroup is the same) (yes I pressed start, and it's running without errors sweatsmile )

grave island Jun 25, 2020, 12:41 PM

#

thanks mono - and apologies, I had been searching the forums, not here. I'm testing it now.

#

Boom! and I have messages on the remote broker ... thanks @cunning wolf

bitter geyser Jun 25, 2020, 3:14 PM

#

i have the wireguard add-on installed and using it as a client to connect to a wireguard "server"

#

but how can i allow connection towards port 8123 on the wg interface?

#

i'm just getting connection refused, so h-a isn't listening on that interface

flint vessel Jun 25, 2020, 4:16 PM

#

hello. im trying to get rhasspy installed and after pulling the image, get an error about mkdir: /<PATH_TO>: Read-only file system

#

im running the hass image for rpi4

eternal finch Jun 25, 2020, 4:24 PM

#

hi there

#

I bought a sonoff mini 2 ways

#

its possible to integrate with HA without changing the firmware?

cunning wolf Jun 25, 2020, 6:34 PM

#

Your pastebin has expired. Set it without an expiry in future 😉

gritty citrus Jun 25, 2020, 6:40 PM

#

dam

#

i will next time i guess setting it to a day wasnt enough

#

in Gorcy when i try and add a product it gives me an error 404
https://pastebin.com/Tx7ehYSE

cunning wolf Jun 25, 2020, 7:08 PM

#

It even tells you which file is missing. Have you checked to see if it's there?

gritty citrus Jun 25, 2020, 7:24 PM

#

i installed it via the addon panel i didnt realise i had to do more?

cunning wolf Jun 25, 2020, 7:30 PM

#

Have you checked to see if the file is there?

gritty citrus Jun 25, 2020, 7:31 PM

#

let me check

#

stand by trying to figure out how to access that part of the file system

cunning wolf Jun 25, 2020, 7:33 PM

#

Yessir

#

If it's an addon, maybe you can't get to it easily. Probably easiest to uninstall and reinstall.

#

It says there's a missing file. Give it a chance to install the file.

gritty citrus Jun 25, 2020, 7:36 PM

#

yeah i tired that reinstalling and it didnt seem to help

cunning wolf Jun 25, 2020, 7:37 PM

#

Refresh your browser cache and try using it again.

gritty citrus Jun 25, 2020, 7:38 PM

#

done and no dice

#

¯_(ツ)_/¯

cunning wolf Jun 25, 2020, 7:49 PM

#

Then log a bug on the addon's page.

gritty citrus Jun 25, 2020, 7:57 PM

#

sent then a message on there discord waiting there reply

leaden nest Jun 25, 2020, 9:48 PM

#

I have just installed MQTT, made a light connect to the MQTT on the home assistant (the connection also came thru in the console, tasmota, ... Installed). But the light doesn't show up as a device. How do I set this up manually?

cunning wolf Jun 25, 2020, 10:17 PM

#

If you're using Tasmota, you might want to look into auto-discovery (SetOption19).

leaden nest Jun 26, 2020, 5:22 AM

#

It only goes to 16 for me.

#

I use a template for LSC rgblight

#

https://linksharing.samsungcloud.com/WY6poyExcSCN

#

Oh, got it. It isn't in that list. But only via console.

leaden nest Jun 26, 2020, 6:10 AM

#

Yesterday I tried putting Tasmota on a light, but all my lights (3) where on one psychical switch and all went in to pairing mode when flashing tasmota.
After that, they all went off. But only one of them got the panel created online.
Now, when I try to turn the other 2 on, they are unresponsive.

#

Did I break those lights? sweatsmile

#

Also a new SSID: vtrust-recovery is showing up?

jovial thicket Jun 26, 2020, 6:29 AM

#

anyone got ultrasonic sensor sr04t to work with esphome on esp32 nodemcu?
the info i got from google are all esp8266
its only giving me timeout msg

#

@leaden nest If i am not mistaken, I dont think you can flash all at once. you will have to do it one by one.. anyways.. thats how i did it

leaden nest Jun 26, 2020, 6:32 AM

#

Got them back to life: they didn't respond anymore, but where still 'online'. So I was able to flash it again.

jovial thicket Jun 26, 2020, 6:32 AM

#

goog

#

good

#

i wish someone could point me to a working yaml for ultrasonic sr04t to work in esphome

bold spire Jun 26, 2020, 7:44 AM

#

@jovial thicket what does your current configuration look like?

jovial thicket Jun 26, 2020, 7:45 AM

#

where can i paste?

astral forge Jun 26, 2020, 8:50 AM

#

Hi guys, I'm having problem to setup the deconz add-on with raspbee. Anyone available to help me?

bold spire Jun 26, 2020, 9:07 AM

#

@astral forge Whats the problem?

astral forge Jun 26, 2020, 9:08 AM

#

@bold spire , I had to reinstall my home assistant from the scratch on a new SD card. Now, the deconz addon is not finding the lights and sensors.
I've already included the lines on config.txt

#

Additionally, it's not holding the firmware upgrade either

#

Before change the SD card, it was working without problems

bold spire Jun 26, 2020, 9:09 AM

#

Anything in the logs?

astral forge Jun 26, 2020, 9:10 AM

#

[26/Jun/2020:10:09:53 +0100] "GET /websocket HTTP/1.1" 101 89 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.116 Safari/537.36"

#

nothing strange

#

a few warning on startup:

libEGL warning: DRI2: failed to open swrast (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
libpng warning: iCCP: known incorrect sRGB profile```

#

[10:10:35] INFO: Running Home Assistant discovery task...
[10:10:35] INFO: Running the deCONZ OTA updater...
2020/06/26 10:10:35 [notice] 533#533: using the "epoll" event method
2020/06/26 10:10:35 [notice] 533#533: nginx/1.10.3
2020/06/26 10:10:35 [notice] 533#533: OS: Linux 4.19.126-v7
2020/06/26 10:10:35 [notice] 533#533: getrlimit(RLIMIT_NOFILE): 1048576:1048576
2020/06/26 10:10:35 [notice] 533#533: start worker processes
2020/06/26 10:10:35 [notice] 533#533: start worker process 548
[10:10:35] INFO: Running the IKEA OTA updater...
[10:10:35] INFO: Running the LEDVANCE/OSRAM OTA updater...
[10:10:35] INFO: deCONZ is set up and running!
[10:10:46] INFO: Successfully send discovery information to Home Assistant.```

bold spire Jun 26, 2020, 9:14 AM

#

Did you try listening for events?

astral forge Jun 26, 2020, 9:14 AM

#

I not sure if I know how to do it

#

*I'm

bold spire Jun 26, 2020, 9:15 AM

#

https://www.home-assistant.io/integrations/deconz/
Specifically:

Navigate to Developer tools->Events. In the section Listen to events add deconz_event and press START LISTENING. All events from deCONZ will now be shown and by pushing your remote button while monitoring the log it should be fairly easy to find the events you are looking for.

astral forge Jun 26, 2020, 9:15 AM

#

I'll try it now

bold spire Jun 26, 2020, 9:17 AM

#

Also do you have the discover entry in your config?

astral forge Jun 26, 2020, 9:17 AM

#

Yes, I do.

bold spire Jun 26, 2020, 9:17 AM

#

And did you re-generate an API key after re-installing?

astral forge Jun 26, 2020, 9:19 AM

#

humm, I'm not sure

#

No events listened

bold spire Jun 26, 2020, 9:21 AM

#

Please read the configuration section

astral forge Jun 26, 2020, 9:21 AM

#

Nothing appears on phoscon app

bold spire Jun 26, 2020, 9:22 AM

#

That is probably the issue

astral forge Jun 26, 2020, 9:23 AM

#

I usually add the device on the phoscon app and then the integration on HA is easy

#

However, now there are nothing on phoscon app and is not finding the devices either

bold spire Jun 26, 2020, 9:24 AM

#

Does the app detect the gateway?

astral forge Jun 26, 2020, 9:24 AM

#

yes

bold spire Jun 26, 2020, 9:28 AM

#

And when you try to add a device in the app nothing happens? Do you have the web interface running on your pi?

astral forge Jun 26, 2020, 9:29 AM

#

nothing happens. Yes, the web interface is running

bold spire Jun 26, 2020, 9:29 AM

#

Have you tried moving devices closer to discover them?

astral forge Jun 26, 2020, 9:30 AM

#

/run.sh: line 132: 468 Segmentation fault (core dumped) deCONZ -platform "${PLATFORM}" --auto-connect=1 --dbg-info="${DBG_INFO}" --dbg-aps="${DBG_APS}" --dbg-otau="${DBG_OTAU}" --dbg-zcl="${DBG_ZCL}" --dbg-zdp="${DBG_ZDP}" --upnp=0 --http-port=40850 --ws-port=8081 --dev="${DECONZ_DEVICE}"
Got this error on addon logs

#

Logged out on phoscon app. Now is searching for gateways

bold spire Jun 26, 2020, 9:33 AM

#

Maybe try uninstall and re-install the add-on? Other than that I am not sure

astral forge Jun 26, 2020, 9:34 AM

#

I already tried that 😦

#

It seems to be any configuration

#

something different from the documentation

bold spire Jun 26, 2020, 9:36 AM

#

Did you add the device serial to the config?

#

Can you try ls -la /dev/serial/by-id/ from the command line

astral forge Jun 26, 2020, 9:39 AM

#

sure

#

I'll try

#

ls: /dev/serial/by-id/: No such file or directory

#

actually, I'm using ttyAMA0

#

crw-rw---- 1 root audio 204, 64 Jun 26 10:15 ttyAMA0

bold spire Jun 26, 2020, 9:43 AM

#

ls -la /dev/tty*

astral forge Jun 26, 2020, 9:43 AM

#

crw-rw-rw- 1 root root 5, 0 Jun 26 10:15 /dev/tty
crw-rw---- 1 root audio 204, 64 Jun 26 10:15 /dev/ttyAMA0
crw-rw---- 1 root audio 4, 64 Jun 26 10:15 /dev/ttyS0

dense spadeBOT Jun 26, 2020, 9:44 AM

#

@astral forge posted a code wall, it is moved here --> https://paste.ubuntu.com/p/v8dVyMymtM/

bold spire Jun 26, 2020, 9:44 AM

#

If you unplug the gateway and run the same, does /dev/ttyAMA0 disappear?

astral forge Jun 26, 2020, 9:45 AM

#

I can try

#

just a minute

bold spire Jun 26, 2020, 9:45 AM

#

Ah nevermind I can see it is the correct device

astral forge Jun 26, 2020, 9:45 AM

#

ok

bold spire Jun 26, 2020, 9:52 AM

#

If you go to the hardware tab in system what devices are reported?

dense spadeBOT Jun 26, 2020, 9:52 AM

#

@astral forge posted a code wall, it is moved here --> https://paste.ubuntu.com/p/Gcm6rwxNf2/

astral forge Jun 26, 2020, 9:52 AM

#

serial:
/dev/ttyS0
/dev/ttyAMA0

bold spire Jun 26, 2020, 9:54 AM

#

Did you set a device ID and channel?

#

gateway ID sorry

astral forge Jun 26, 2020, 9:54 AM

#

On configuration tab? no

bold spire Jun 26, 2020, 9:56 AM

#

And did you add /dev/ttyAMA0 to the configuration?

#

I'm guessing yes

astral forge Jun 26, 2020, 9:56 AM

#

Yes

#

I've increased the addon log level

bold spire Jun 26, 2020, 9:57 AM

#

Sorry I'm out of ideas, I've not done much deconz! Did you try moving a device closer?

#

OK see if anything else happens in the logs

astral forge Jun 26, 2020, 9:58 AM

#

Yes, they are close

#

on log:
10:56:49:691 HTTP Server listen on address 0.0.0.0, port: 40850, root: /usr/share/deCONZ/webapp/

#

0.0.0.0 ?

bold spire Jun 26, 2020, 9:59 AM

#

Just means its listening on all IP's I think, this is normal

astral forge Jun 26, 2020, 9:59 AM

#

I'll try to change
dtoverlay=pi3-miniuart-bt to dtoverlay=pi3-disable-bt
on config.txt

#

and completely disable bluetooth

bold spire Jun 26, 2020, 10:03 AM

#

I take it you have tried changing USB ports?

astral forge Jun 26, 2020, 10:03 AM

#

Its serial (raspbee) not usb 😦

bold spire Jun 26, 2020, 10:05 AM

#

Oh! So have you tried this

enable_uart=1

in config.txt?

astral forge Jun 26, 2020, 10:07 AM

#

yes, it is

bold spire Jun 26, 2020, 10:12 AM

#

Hopefully someone with more deconz experience can help

astral forge Jun 26, 2020, 10:12 AM

#

Thank you @bold spire

cyan prawn Jun 26, 2020, 3:31 PM

#

I have switch from the built in DB to Mariadb. In my yaml file have have db_url: mysql://homeassistant:~xxxx@core-mariadb/homeassistant?charset=utf8 - I can't find out where the db is stored. Search many forums and see many people with similar questions.

sly kindle Jun 26, 2020, 3:37 PM

#

@cyan prawn in the container

cyan prawn Jun 26, 2020, 3:37 PM

#

In what container? How do I find it?

sly kindle Jun 26, 2020, 3:38 PM

#

what are you looking to do?

#

all addons are containers

cyan prawn Jun 26, 2020, 3:41 PM

#

I am looking to find the db file to see the size

#

I see there is a docker container using ssh. Can I see it with samba?

atomic stone Jun 27, 2020, 2:44 AM

#

I'm starting to use motion eye and it's really great, but now I want to have my recordings save. what can I do to have a second external hard drive with hass os for the mtion eye add on?

modern hound Jun 27, 2020, 11:19 AM

#

Node red thing is still annoying. I'm still seeing "Attention: This node requires Node-RED custom integration to be installed in Home Assistant for it to function." despite having loaded HACs, loaded Node-Red addin and also having checked that the correct pallete Item is in place. I still cannot find a way to see any of my HA entities in NodeRed 😦

mint sierra Jun 27, 2020, 11:21 AM

#

@cyan prawn install the phpMyAdmin addon

#

I’m using WireGuard combined with AdGuard as documented (172.30.32.1 as DNS IP).

I want to filter some content on Kids_Phone and not on Dads_Phone. I can’t see the difference between these two devices in AdGuard because they both show up as the same client in the AdGuard Query Logs.

mortal moth Jun 27, 2020, 3:15 PM

#

Hi - I am trying to get the zigbee2mqtt add-on talking to the Mosquitto add-on (not the deprecated built in MQTT server)

#

So I removed the built in MQTT settings from configuration.yaml and removed it from integrations, then restarted.

#

After restart, the Integrations page showed the MQTT add-on in discovered integrations, so I configured it.

#

I am unsure how to configure zigbee2mqtt to use the Mosquitto add-on

#

This config doesn't seem to work:
mqtt: base_topic: zigbee2mqtt server: 'mqtt://localhost:1883' user: mqtt password: password

cunning wolf Jun 27, 2020, 3:28 PM

#

What do the logs say when you try to start the addon?

mortal moth Jun 27, 2020, 3:28 PM

#

zigbee2mqtt:info 2020-06-27 16:25:10: Connecting to MQTT server at mqtt://localhost:1883 zigbee2mqtt:error 2020-06-27 16:25:20: Not connected to MQTT server!

cunning wolf Jun 27, 2020, 3:30 PM

#

That's all?

mortal moth Jun 27, 2020, 3:30 PM

#

Those are the zigbee2mqtt logs - lots of lines saying Not connected to MQTT server!

cunning wolf Jun 27, 2020, 3:31 PM

#

Try using the IP address and ignoring the port number: server: 'mqtt://192.168.1.21'

mortal moth Jun 27, 2020, 3:32 PM

#

Yep - that seemed to work!

cunning wolf Jun 27, 2020, 3:34 PM

#

Don't forget, addons run in containers. 'localhost' doesn't mean what you think it means.

mortal moth Jun 27, 2020, 3:34 PM

#

Ok - assuming 127.0.01 also wouldn't work

#

Now I cannot see any of my zigbee devices - either the ones that were there before when using the built in mqtt, or any new ones that have been discovered

cunning wolf Jun 27, 2020, 3:38 PM

#

You might want to ask over in #zigbee-archived about that. Make sure to tell them you're using z2m.

mortal moth Jun 27, 2020, 3:39 PM

#

Ok - thanks

lunar oxide Jun 27, 2020, 3:45 PM

#

just updated to hassos_rpi4-4.10, to find no VSCode on this build. I searched but couldnt find details... is there info about this? thanks

silver sinew Jun 27, 2020, 5:22 PM

#

I have been attempting to setup hadashboard for use on an older tablet of mine - however with darksky getting bought out by apple, I am not able to get a darksky license key allowing me to use the darksky integration, I am wondering if there is a way to use another weather service (e.g openweathermap) with the built in weather panel or if I have to create my own

lunar oxide Jun 27, 2020, 5:41 PM

#

Meteorologisk institutt (Met.no) stopped working but is working on the currenly build.

silver sinew Jun 27, 2020, 6:06 PM

#

Sorry, what do you mean by that?

cunning wolf Jun 27, 2020, 6:08 PM

#

I assume they mean Dark Sky isn't your only option.

#

In fact, there are many weather #integrations-archived available. To find out more, go to the appropriate channel.

silver sinew Jun 27, 2020, 6:19 PM

#

So let me see if I understand this correctly, In order for the Appdaemon HADashboard (docs: https://appdaemon.readthedocs.io/en/latest/DASHBOARD_INSTALL.html) weather widget to not link into darkskys I should install another weather inegration on the lovelace dashboard?

cunning wolf Jun 27, 2020, 6:25 PM

#

Having no idea how either AppDaemon or HADashboard work, I have no idea.

#

But you're continuing to ask in the wrong channel about #integrations-archived 😉

manic ferry Jun 27, 2020, 8:16 PM

#

@twin parrot Looking for help with schedy all I got was ask Robert didn't say which one, are you the one?

cunning wolf Jun 27, 2020, 8:17 PM

#

https://tenor.com/view/the-one-he-is-the-one-gif-14744864

viscid orchid Jun 27, 2020, 8:19 PM

#

<not the one> 😢

cedar rover Jun 27, 2020, 8:46 PM

#

How do i get conbee 2 to work? I can login, it is connected but it has a completely other subnet so gaining a api key doenst work.

cedar rover Jun 27, 2020, 9:13 PM

#

nvm, got it working

spare depot Jun 27, 2020, 11:13 PM

#

how do you get almond to recognize an area

#

so if i have 2 speakers that have an area named studio how would i activate both?

spare depot Jun 28, 2020, 12:58 AM

#

does almond even really work with HA? Can't really do anything with it that I can tell.

obtuse crow Jun 28, 2020, 3:58 AM

#

Hi everyone. I am having problems restoring the mariadb add-on when I take a snap shot.

#

I am getting this as an error: Can't restore origin data: [('/data/tmp/tmp_2nadrbm/data/databases/mariadb.err', '/data/addons/data/core_mariadb/databases/mariadb.err', '/data/tmp/tmp_2nadrbm/data/databases/mariadb.err is a named pipe')]

#

Anyone have ideas what might be causing this?

#

I am trying to restore this onto a fresh system. I have tried the exact same computer, a virtualbox, and a different computer - each time mariadb bonks and everything else is fine.

#

I have a done of data in mariadb - would hate to loose it.

cedar rover Jun 28, 2020, 2:04 PM

#

Can somebody please help. I just added zigbee2mqtt and filled in all the necessary info, and from what i can see its running without errors. But how can i see if a devices is paired successfully

viscid orchid Jun 28, 2020, 2:13 PM

#

#zigbee-archived

wraith pulsar Jun 28, 2020, 4:36 PM

#

hi, how I can install the open mqtt gateway

#

https://github.com/1technophile/OpenMQTTGateway/wiki/Home-Assistant-integration

#

can someone help?

#

is this an addon?

#

or is this intigration installed out of the box on my home assistant?

#

thanks for everyone who has an answer

cunning wolf Jun 28, 2020, 4:41 PM

#

That page is just a bunch of examples of MQTT sensors. They're #integrations-archived .

wraith pulsar Jun 28, 2020, 4:41 PM

#

ah okay

#

so I don't need to download the zip file?

cunning wolf Jun 28, 2020, 4:42 PM

#

I don't see any mention of a zip file...

#

If you mean to install OpenMQTTGateway itself... yes, you'll have to install something. Follow their instructions.

wraith pulsar Jun 28, 2020, 4:44 PM

#

https://github.com/1technophile/OpenMQTTGateway/releases

cunning wolf Jun 28, 2020, 4:44 PM

#

To integrate things with HA, you go to #integrations-archived.

wraith pulsar Jun 28, 2020, 4:45 PM

#

how I can install it on my home assistant?

#

via hacs?

#

or the official addon store

cunning wolf Jun 28, 2020, 4:46 PM

#

Do you even know what it is?

wraith pulsar Jun 28, 2020, 4:46 PM

#

yes, I have already use zigbee2mqtt

#

I need a gateway for 433mhz devices

#

so I found this option with the open mqtt gateway

cunning wolf Jun 28, 2020, 4:47 PM

#

What is OpenMQTTGateway? What does it do? All I see if a bunch of firmwares for ESP chips.

#

All of the devices is says it supports can work with any MQTT broker. You already have one if you're using z2m.

#

HA communicates with those devices via MQTT using... you guessed it, #integrations-archived!

#

Put Tasmota/ESPHome on your devices so they can talk to MQTT. Configure HA to read from MQTT. Done.

wraith pulsar Jun 28, 2020, 4:50 PM

#

okay, so my raspberry pi with home assistant and the mosquitto addon is an OpenMQTTGateway?

#

right?

cunning wolf Jun 28, 2020, 4:50 PM

#

No...

wraith pulsar Jun 28, 2020, 4:50 PM

#

😅

#

I'm sorry

cunning wolf Jun 28, 2020, 4:50 PM

#

You saw all those ZIP files, right? All the ones that said 'firmware' in their names?

wraith pulsar Jun 28, 2020, 4:51 PM

#

yes

cunning wolf Jun 28, 2020, 4:51 PM

#

It's software to go onto the chips of hardware devices...

#

Nothing to do with HA.

#

Not HACS. Not addons.

wraith pulsar Jun 28, 2020, 4:51 PM

#

okay than it is firmwares for the divices

#

nothing else

cunning wolf Jun 28, 2020, 4:52 PM

#

And once those devices talk to your MQTT broker, HA will see them and be able to talk to them.

#

But since this is nothing to do with HA #add-ons-archived , you either want to ask in #diy-archived about messing with devices or in #integrations-archived about getting HA to see them once they're in MQTT.

wraith pulsar Jun 28, 2020, 4:53 PM

#

okay

#

nice

#

I understand

#

thanks a lot for supporting

#

God bless you :)

smoky arrow Jun 28, 2020, 6:23 PM

#

I've been searching all morning...does Tor not work with stealth mode on?? Works fine when I have stealth set to false

real comet Jun 29, 2020, 6:45 AM

#

Anyone know where the editable files live on zwave2mqtt inside of Hassio add on

cunning wolf Jun 29, 2020, 7:18 AM

#

You'd be better off asking in #zwave-archived

real comet Jun 29, 2020, 7:24 AM

#

@cunning wolf but it’s an add-on not core

cunning wolf Jun 29, 2020, 7:25 AM

#

But it's Z-Wave...

#

You could ask here for general add-ons about anything, or you could ask there where people that use that specific add-on hang out.

#

Better odds of someone knowing the answer in a more specialised channel.

real comet Jun 29, 2020, 7:27 AM

#

Ok in general if the add-on is installed with RW capability of the config folder then I can use

/config/doit as a folder?

cunning wolf Jun 29, 2020, 7:30 AM

#

In general, it's a Docker container with some folder structure. Who knows?

#

Once you're in, ls to see what's there and poke around.

#

But if you don't want to guess, ask in #zwave-archived where someone can answer your specific question.

real comet Jun 29, 2020, 7:31 AM

#

Ok thanks

cobalt abyss Jun 29, 2020, 10:27 AM

#

So where is a good place to get some MQTT and Tasmota help, I have a new Tuya pet feeder I flashed with Tasmota but no existing config for it so trying to learn how to make my own

cunning wolf Jun 29, 2020, 11:12 AM

#

I'm going to go with 'not in the #add-ons-archived channel' for starters, @cobalt abyss. Even if it were a HA question, it'd probably be more at home in #diy-archived. However, Tasmota has its own Discord, so you'll get better help there: https://discord.gg/Ks2Kzd4

cobalt abyss Jun 29, 2020, 12:12 PM

#

Sorry lol thought the MQTT was an add-on so kinda started there lol

#

My b

cyan prawn Jun 29, 2020, 1:18 PM

#

I have samba and ssh working but neither can see the contents of the containers? Specifically I am looking to find the mariadb file.

sly kindle Jun 29, 2020, 1:35 PM

#

@cyan prawn still trying to find the size?

#

Do you have a snapshot?

#

You could browse a recent snapshot and get an idea of the size.

#

Or you could use the phpmyadmin add-on and look at the size

versed notch Jun 29, 2020, 1:51 PM

#

I got a question regarding traccar and MariaDB.
My MariaDB log is getting spammed with:
[Warning] Aborted connection 1444 to db: 'traccar' user: 'service' host: '172.30.32.1' (Got an error reading communication packets)
Traccar gives me a 502

cyan prawn Jun 29, 2020, 1:55 PM

#

I do have a snapshot. Still don't understand why I can't easily see the file size. I just installed hopefully this will let me see the file size. I am trying to reduce writes to the db and file size due to still on a SD memory card. Not easy to see if I am accomplishing anything unless I know what I am starting with.

#

See it with the phpmyadmin add on. Thanks. I don't understand the rational on hiding this with the normal Samba or SSH tools?

sly kindle Jun 29, 2020, 1:58 PM

#

it's not hidden

#

it's in the container, you are just unaware of how to bash into a container

#

samba is exposing folder shares

#

the mariadb isn't in any of those

cyan prawn Jun 29, 2020, 2:00 PM

#

Where do I learn how to bash into a container

sly kindle Jun 29, 2020, 2:02 PM

#

If you connect to the host and use docker commands, you can do this. Or you could use the community repo ssh addon with protection mode off to use docker commands

cyan prawn Jun 29, 2020, 2:02 PM

#

I have the community ssh addon and with protection off.

sly kindle Jun 29, 2020, 2:03 PM

#

a quick test is whether docker ps works

cyan prawn Jun 29, 2020, 2:05 PM

#

docker exec -it fbd81dccedd4 /bin/bash

#

It works.

#

how do I find the file

sly kindle Jun 29, 2020, 2:06 PM

#

ls

cyan prawn Jun 29, 2020, 2:07 PM

#

19 directories. Which one has the db file

sly kindle Jun 29, 2020, 2:08 PM

#

instinct...

#

try /data

cyan prawn Jun 29, 2020, 2:09 PM

#

ls in data gives me options.json secret

sly kindle Jun 29, 2020, 2:09 PM

#

you don't see "databases"?

#

📎 unknown.png

cyan prawn Jun 29, 2020, 2:10 PM

#

I do not

#

I guess it is hidden. If I do cd databases, then LS I have a similar screen as yours

#

But this does not show any files sizes

sly kindle Jun 29, 2020, 2:13 PM

#

you use ls with options. ls -hal is what I usually go with

cyan prawn Jun 29, 2020, 2:14 PM

#

THANK YOU! I assume the name is mysql?

sly kindle Jun 29, 2020, 2:15 PM

#

mmm...you should be seeing a directory for each database you have

#

you would then enter the homeassistant one and see the ibd files

#

I have bookstack, and nginxproxymanager databases as well, for example

#

so it depends on if you're looking for a grand total of databases, or just the database home assistant is using for states, events, etc

cyan prawn Jun 29, 2020, 2:16 PM

#

so mariadb doesn't have a main db file?

sly kindle Jun 29, 2020, 2:17 PM

#

scroll back up to my screenshot and you'll see bookstack and homeassistant...those are directories

cyan prawn Jun 29, 2020, 2:20 PM

#

I have homeassistant as well. I have 4 ibd files in it. I assume these are the data bases for Mariadb?

sly kindle Jun 29, 2020, 2:22 PM

#

those are specifically for homeassistant...What recorder:is using

cyan prawn Jun 29, 2020, 2:23 PM

#

so is there one DB file?

sly kindle Jun 29, 2020, 2:24 PM

#

just check the size of the directory

#

du -h homeassistant

#

or use phpmyadmin instead

#

you'll see the databases

#

and tables

cyan prawn Jun 29, 2020, 2:25 PM

#

Thank you. Need to learn more linux.

spare depot Jun 29, 2020, 2:30 PM

#

What is the proper topic area for discussions around Almond??

sly kindle Jun 29, 2020, 2:33 PM

#

"discussions" here in discord depend on someone else running the same thing who happens to also be in the channel 😛 Questions about installing it would be fine here. Actual usage might be better in #voice-assistants-archived .

#

Or the community forum.

#

Almond is a little primative and hasn't seen much love over the past year but the project just got a new chunk of funding

#

@spare depot

versed notch Jun 29, 2020, 3:02 PM

#

Could someone help me troubleshoot Traccar giving me a 502 Bad Gateway - nginx?

dark yoke Jun 29, 2020, 3:03 PM

#

Add-on has not started, check the add-on/supervisor logs

versed notch Jun 29, 2020, 3:03 PM

#

I have the recommended settings on both MariaDB and Traccar

#

MariaDB says : [Warning] Aborted connection 1444 to db: 'traccar' user: 'service' host: '172.30.32.1' (Got an error reading communication packets)

#

The odd thing is that nothing in my local network uses ip's from the 172 range

sly kindle Jun 29, 2020, 3:06 PM

#

those are internal docker network ip addresses

versed notch Jun 29, 2020, 3:06 PM

#

MariaDB Configuration:

databases:
  - homeassistant
logins:
  - username: homeassistant
    password: [somepassword]
rights:
  - username: homeassistant
    database: homeassistant

#

I left the Traccar config for what it was

#

This is my configuration.yaml

device_tracker:
  - platform: traccar
    ssl: true
    verify_ssl: false
    host: '192.168.x.xxx'
    port: '8072'
    username: !secret traccar_username
    password: !secret traccar_password
    interval_seconds: 120
    consider_home: 60
    track_new_devices: yes

#

I've tried reinstalling MariaDB and Traccar

hot glacier Jun 29, 2020, 3:46 PM

#

i installed Home Assistant Add-on: RPC Shutdown and i configured the config but how do i turn it off now and how do i add it to lovelacase

sly kindle Jun 29, 2020, 3:49 PM

#

@hot glacier test out the service using developer tools > services

#

the addon documentation shows how

#

If that works, then move on to creating an automation for it or otherwise making use of it in lovelace

hot glacier Jun 29, 2020, 3:58 PM

#

i dont know i dont get it to work

sly kindle Jun 29, 2020, 3:59 PM

#

the services dropdown...find hassio.addon_stdin

hot glacier Jun 29, 2020, 3:59 PM

#

i wil try something more

sly kindle Jun 29, 2020, 4:00 PM

#

the service data would be addon: core_rpc_shutdown input: test-pc

#

replace test-pc with the name you configured

hot glacier Jun 29, 2020, 4:07 PM

#

oke now i have the good ip but i get this

#

[18:07:18] INFO: Read alias: main
[18:07:22] INFO: Shutdown main -> my ip
Could not connect to server : my ip
The username or password was not correct.
Connection failed: NT_STATUS_LOGON_FAILURE
Could not connect to server my ip
The username or password was not correct.
Connection failed: NT_STATUS_LOGON_FAILURE
[18:07:22] ERROR: Shutdown fails ->

#

my credentials are good

#

?

smoky arrow Jun 29, 2020, 4:16 PM

#

Does Tor not work with stealth mode on?

hot glacier Jun 29, 2020, 4:18 PM

#

?

#

is it about shutting down a windows pc remotely or?

sly kindle Jun 29, 2020, 4:20 PM

#

@smoky arrow ask in the community addon discord. sent a link

#

@hot glacier is it an email address as the credentials?

hot glacier Jun 29, 2020, 4:21 PM

#

i put in my username

#

or do i need my email

sly kindle Jun 29, 2020, 4:21 PM

#

I would go into c:\users on your windows machine and see what it is there

#

there's a directory for your windows user which has a name. use that

hot glacier Jun 29, 2020, 4:24 PM

#

thx i puttet in what it said there but now i get this error

#

[18:23:37] INFO: Read alias: main
[18:23:41] INFO: Shutdown main -> MY ip adress lol
Could not initialise pipe winreg. Error was NT_STATUS_OBJECT_NAME_NOT_FOUND
[18:23:41] ERROR: Shutdown fails ->

sly kindle Jun 29, 2020, 4:25 PM

#

https://blog.sip2serve.com/post/155565656901/shutdown-windows-10-remotely

#

#3 there

cunning wolf Jun 29, 2020, 4:42 PM

#

For a really easy way to shut down a PC, just use IOTLink on that machine.

#

Publish a shutdown message via MQTT, job done.

hot glacier Jun 29, 2020, 4:42 PM

#

[18:41:34] INFO: Read alias: main
[18:41:37] INFO: Shutdown main -> my ip
Shutdown of remote machine failed
result was: WERR_CALL_NOT_IMPLEMENTED
[18:41:39] ERROR: Shutdown fails ->
[18:41:39] INFO: Read alias: main
[18:41:43] INFO: Shutdown main -> my ip
Shutdown of remote machine failed
result was: WERR_CALL_NOT_IMPLEMENTED
[18:41:43] ERROR: Shutdown fails ->

#

a new error

#

lol jesus

sly kindle Jun 29, 2020, 4:43 PM

#

I like iotLink as well

#

another option is to install nodered on any machine, linux or windows, etc and use it like a client

#

But that error is also covered in the link I shared

hot glacier Jun 29, 2020, 4:44 PM

#

now i do it this way because i am almost done (i hope)

sly kindle Jun 29, 2020, 4:45 PM

#

Windows is finicky with this these days

cunning wolf Jun 29, 2020, 4:45 PM

#

I like IOTLink even more after realising I can control the volume on my PC remotely. I got annoyed with not being able to change the volume from my work machine during the day (media plays through the PC to surround sound).

hot glacier Jun 29, 2020, 4:45 PM

#

yes i see it @sly kindle buy the way thanks for your help

sly kindle Jun 29, 2020, 4:46 PM

#

@cunning wolf yes, being able to mute/unmute desktop discord notifications while media player is playing is nice

#

node-red can bascially pass on any console command, which is also cool

cunning wolf Jun 29, 2020, 4:47 PM

#

Oh. On that topic (and feel free to send me to another channel 😄 ), is there a way to tell when a Teams call is in progress?

sly kindle Jun 29, 2020, 4:48 PM

#

a teams call?

#

hmm

cunning wolf Jun 29, 2020, 4:48 PM

#

Yeah... auto-mute music when it knows I'm in a meeting/call. I don't know if there's an API for that 😐

sly kindle Jun 29, 2020, 4:50 PM

#

yeah, I'm not aware either

cunning wolf Jun 29, 2020, 4:50 PM

#

I'll do some research. Cheers 🙂

hot glacier Jun 29, 2020, 4:51 PM

#

yes its working

#

i will try iotlink now too

#

i am new to home assistannt

sly kindle Jun 29, 2020, 4:52 PM

#

iotlink needs the mosquitto broker addon set up

#

a little more involved

#

but a lot more functionality

hot glacier Jun 29, 2020, 4:53 PM

#

i know

#

i already have mqtt

#

do you have tips i run home assistant now on pi3 and i wil put it on pi4 soon do you have tips to easy convert

cunning wolf Jun 29, 2020, 4:57 PM

#

Using the image?

hot glacier Jun 29, 2020, 4:57 PM

#

yes

cunning wolf Jun 29, 2020, 4:57 PM

#

Then #330990055533576204 will have tips 🙂

hot glacier Jun 29, 2020, 4:57 PM

#

oke

#

or via addon when that exists

hot glacier Jun 29, 2020, 5:30 PM

#

1 last question how do i add the addon to lovelace

#

type: ''
service: hassio.addon_stdin
data:
addon: core_rpc_shutdown
input: main

#

this?

#

but wich type

#

card

last cobalt Jun 29, 2020, 5:59 PM

#

I've installed the node-red addon from the store but it's not starting. When I go to the web UI it says gateway error 502 and then the addon service stops

#

is SSL necessary? I haven't set up SSL on my hass instance, so maybe that's part of the issue?

hot glacier Jun 29, 2020, 6:01 PM

#

i have also problems with ssl

hot glacier Jun 29, 2020, 6:23 PM

#

but how can i add it

sly kindle Jun 29, 2020, 6:23 PM

#

you use what you tested to create an automation

hot glacier Jun 29, 2020, 6:23 PM

#

the card and ssl with duckdns

sly kindle Jun 29, 2020, 6:23 PM

#

one thing at a time 😛

versed notch Jun 29, 2020, 6:24 PM

#

Anyone knowledgeable about MariaDB?
Traccar keeps giving me an error and traccar wont start up (502)
[Warning] Aborted connection 30 to db: 'traccar' user: 'service' host: '172.30.32.1' (Got an error reading communication packets)
Could it be that there is something wring with my configuration.yaml?

I got this:

recorder:
  db_url: mysql://homeassistant:PASSWORD@localhost/homeassistant?charset=utf8

Could I be missing something

hot glacier Jun 29, 2020, 6:24 PM

#

oke the card

versed notch Jun 29, 2020, 6:24 PM

#

I tried googling it as well, but I really can't seem to find the mistake I've made

hot glacier Jun 29, 2020, 6:25 PM

#

@sly kindle

sly kindle Jun 29, 2020, 6:25 PM

#

you create an automation, not a card

#

if you want to create a card which lets you enter any text you want that is going to require some advanced #frontend-archived

hot glacier Jun 29, 2020, 6:26 PM

#

i mean a card with a button that you can turn it off

sly kindle Jun 29, 2020, 6:26 PM

#

oops...mixing you up with the notifications person..

hot glacier Jun 29, 2020, 6:27 PM

#

lol

sly kindle Jun 29, 2020, 6:27 PM

#

there are many ways, but one way would be by using the entity-button card

cunning wolf Jun 29, 2020, 6:29 PM

#

@versed notch localhost? Docker? Yeah, that probably isn't gonna work.

versed notch Jun 29, 2020, 6:30 PM

#

What should I fill in there? core-mariadb? @cunning wolf

#

I tried that and got the same error :/ So I'm just trying things out now

cunning wolf Jun 29, 2020, 6:31 PM

#

Where is the addon running that contains your DB?

versed notch Jun 29, 2020, 6:31 PM

#

You mean mariaDB?

#

I got MariaDB and Traccar

cunning wolf Jun 29, 2020, 6:32 PM

#

Where?

versed notch Jun 29, 2020, 6:32 PM

#

In Hass.io. In the Web interface

cunning wolf Jun 29, 2020, 6:33 PM

#

No. That's how you access them. Where are they?

versed notch Jun 29, 2020, 6:33 PM

#

Good question

cunning wolf Jun 29, 2020, 6:33 PM

#

Under the bed? In a cornflake box? On a computer?

versed notch Jun 29, 2020, 6:33 PM

#

On the sd on the pi

#

Pi 4

cunning wolf Jun 29, 2020, 6:33 PM

#

And what's the address of the Pi?

versed notch Jun 29, 2020, 6:34 PM

#

Local or external?

cunning wolf Jun 29, 2020, 6:34 PM

#

Local, unless you want all communication to have to make a round trip to the outside world.

hot glacier Jun 29, 2020, 6:34 PM

#

how can you make a card

#

idk

cunning wolf Jun 29, 2020, 6:34 PM

#

In #frontend-archived , epearl

versed notch Jun 29, 2020, 6:35 PM

#

Was gonna say, I don't think I need it to be external

hot glacier Jun 29, 2020, 6:35 PM

#

ok

versed notch Jun 29, 2020, 6:35 PM

#

My local address is 192.168.2.4

cunning wolf Jun 29, 2020, 6:35 PM

#

So... what happens when you use that?

versed notch Jun 29, 2020, 6:35 PM

#

Then the pi uses it's own address, accessed from the router (?)

sly kindle Jun 29, 2020, 6:36 PM

#

core-mariadb should work

#

instead of localhost

#

but local ip address should too

versed notch Jun 29, 2020, 6:36 PM

#

recorder:
db_url: mysql://homeassistant:PASS@core-mariadb/homeassistant?charset=utf8

#

Like that?

sly kindle Jun 29, 2020, 6:36 PM

#

 db_url: mysql://homeassistant:password@core-mariadb/homeassistant?charset=utf8```

#

yes

versed notch Jun 29, 2020, 6:37 PM

#

What is the difference for this application in between using 127.0.0.1 and 192.168.2.4

cunning wolf Jun 29, 2020, 6:37 PM

#

127.0.0.1 = localhost.

#

i.e. the environment that you're in now.

#

Docker containers are their own environment.

versed notch Jun 29, 2020, 6:37 PM

#

Oh right

#

and my pi gives it its own address

#

so by leaving it localhost it will stay in the envoirement

#

unless I tell it to access the pi

#

By using a local address instead of localhost

#

Right?

cunning wolf Jun 29, 2020, 6:38 PM

#

Not quite. Your local IP is your way into the Pi. The Pi might delegate access to other things within it.

#

Like how your external IP gets you to your router and then the router decides where the requests go within your network.

sly kindle Jun 29, 2020, 6:39 PM

#

192.168.2.4 is where mariadb is running, 192.168.2.4 is where traccar is running, 192.168.2.4 is where homeassistant is running...etc

versed notch Jun 29, 2020, 6:39 PM

#

I see

#

I mean, I know a bit of networking, but not that much hahaha

#

Excuse me for my lack of understanding 😅

cunning wolf Jun 29, 2020, 6:40 PM

#

Nah, that wasn't too painful. We've suffered worse 😄

versed notch Jun 29, 2020, 6:41 PM

#

Hahah for sure

#

Earlier when I used core-mariadb it gave me that same error

#

I'm trying the local IP now, gonna see how that works

#

The silly thing is, most of this stuff just worked and I felt like I understood it. But when MariaDB just gave that error I was just clueless

cunning wolf Jun 29, 2020, 6:42 PM

#

Happens to us all sometimes, don't worry about it.

versed notch Jun 29, 2020, 6:44 PM

#

[Warning] Aborted connection 398 to db: 'traccar' user: 'service' host: '172.30.32.1' (Got an error reading communication packets)
Yep, same error again

#

@cunning wolf

#

So the Recorder part seems to be okay

sly kindle Jun 29, 2020, 6:46 PM

#

do you actually have gps devices in your cars for using with traccar?

#

becasuse it's really not worth the hassle unless you do

versed notch Jun 29, 2020, 6:46 PM

#

I wanted to hook my phone into it

sly kindle Jun 29, 2020, 6:47 PM

#

there are better ways of tracking your phone

versed notch Jun 29, 2020, 6:47 PM

#

I mostly wanted to check the system out and see what it could offer me

cunning wolf Jun 29, 2020, 6:47 PM

#

GPSLogger for Android. Something else for iPhone.

sly kindle Jun 29, 2020, 6:47 PM

#

the HA mobile apps, gpslogger, owntracks...

cunning wolf Jun 29, 2020, 6:47 PM

#

Traccar seems kinda pointless unless you're doing fleet management.

versed notch Jun 29, 2020, 6:47 PM

#

I see

cunning wolf Jun 29, 2020, 6:47 PM

#

One car does not make a fleet 😄

versed notch Jun 29, 2020, 6:47 PM

#

hahaha I see

sly kindle Jun 29, 2020, 6:48 PM

#

or if your family has cars and each of them have a gps device in them...

versed notch Jun 29, 2020, 6:48 PM

#

I thought it was like, giving you that same thing that google gives you, the roads you been on and everything

sly kindle Jun 29, 2020, 6:48 PM

#

which was a possibility, so thought I'd ask

versed notch Jun 29, 2020, 6:48 PM

#

But then locally

cunning wolf Jun 29, 2020, 6:48 PM

#

or if your family has cars and each of them have a gps device in them...
@sly kindle That's a fleet 😄

sly kindle Jun 29, 2020, 6:48 PM

#

there is no way to do gps locally really

cunning wolf Jun 29, 2020, 6:49 PM

#

Nat - does your car ever go anywhere without you?

versed notch Jun 29, 2020, 6:49 PM

#

not really

cunning wolf Jun 29, 2020, 6:49 PM

#

Then your mobile is your car tracker.

versed notch Jun 29, 2020, 6:49 PM

#

I mostly travel by bike tbh

cunning wolf Jun 29, 2020, 6:49 PM

#

If you want to know when you're in your car, use something else to detect that.

versed notch Jun 29, 2020, 6:49 PM

#

I thought it would be a fun way to track the distance and everything lmao

#

I found a way that I could hook my phone to hass with the gpslogger

sly kindle Jun 29, 2020, 6:50 PM

#

life360 app is another

versed notch Jun 29, 2020, 6:50 PM

#

Is there a way that I could easily collect all that data and display it on a map?

cunning wolf Jun 29, 2020, 6:51 PM

#

Location history? Probably

sly kindle Jun 29, 2020, 6:51 PM

#

the map card will now show device tracker entities paths

#

not the main map panel, but a separately added card

versed notch Jun 29, 2020, 6:52 PM

#

Oh really? How does one add that card?

sly kindle Jun 29, 2020, 6:52 PM

#

it's kind of rudimentary but it's there

versed notch Jun 29, 2020, 6:52 PM

#

Or could it show that on a day to day basis where I've been

cunning wolf Jun 29, 2020, 6:52 PM

#

Oh... how'd I miss the 'hours' bit? 😄

#

Nat - over to #frontend-archived for questions on that 😉

sly kindle Jun 29, 2020, 6:53 PM

#

📎 unknown.png

#

you just add it 🙂

cunning wolf Jun 29, 2020, 6:53 PM

#

Or a mod could just break the rules and tell you here 😄

sly kindle Jun 29, 2020, 6:53 PM

#

now GO TO #frontend-archived !!

#

lol

versed notch Jun 29, 2020, 6:53 PM

#

I suppose that could be done by just collect the data and throw it in a database and then use the content of that database on a map + filter buttons

#

hahaha I will

gleaming cairn Jun 29, 2020, 6:59 PM

#

Hello everyone, I hope I am ride here. I have a question I’m looking for a setup for the Dutch klik aan klik uit.. On the internet nothing I can find😞 Is there someone were this is is running? Please share it with my... you help me a lot

dense spadeBOT Jun 29, 2020, 7:07 PM

#

@gleaming cairn Please DO NOT cross post. Read the channel description, post it and wait for folks to respond.

hot glacier Jun 29, 2020, 7:28 PM

#

yes i have duckdns working with https ssl

#

i am so happy

edgy cobalt Jun 29, 2020, 8:20 PM

#

I continue to receive the following notifications configurator
Click button to configure Alexa Media Player - Begin - When I click on configure it doesn't allow me to configure anything on it? I visited this https://community.home-assistant.io/t/alexa-media-player-2-factor-verification-code-not-received/176777 but this didn't help as I don't get prompted to enter a verification code any links and/or ideas to fix this would be appreciated

clear gust Jun 29, 2020, 8:54 PM

#

Is there some kind of tutorial on how to run two different z2m instances in hassio in order to run and manage two separated ZigBee networks?

cunning wolf Jun 29, 2020, 8:56 PM

#

I'm not sure you can do that. About the closest you'll get is this: https://github.com/lukas-hetzenecker/home-assistant-remote

#

A possible use case for this is to be able to use different Z-Wave networks, on different Z-Wave sticks (with the second one possible running on another computer in a different location).
Applies to ZigBee too.

clear gust Jun 29, 2020, 8:56 PM

#

A short note on why I would like to do that: I have three ZigBee devices (i.e., three Heiman sirens) that hamper the stability of the entire ZigBee network.

cunning wolf Jun 29, 2020, 8:56 PM

#

You wouldn't have two networks running on one host. You'd need two hosts.

#

Is that all? Replace the bad devices 😄

clear gust Jun 29, 2020, 8:57 PM

#

So my idea for a workaround is to create a separate network that covers the problematic devices.

#

@cunning wolf: Unfortunately it is not that easy. 😦

#

So, two coordinators with two separated z2m instances won't work. 😦

cunning wolf Jun 29, 2020, 9:00 PM

#

You're telling me it won't work before looking at something designed to solve that very same problem?

clear gust Jun 29, 2020, 9:00 PM

#

Of course running at different channels.

cunning wolf Jun 29, 2020, 9:00 PM

#

Go read that page, try it out, see what it does.

#

Don't write things off without even trying.

clear gust Jun 29, 2020, 9:07 PM

#

@cunning wolf: Sorry for the misunderstanding, I made the conclusion "So, two coordinators with two separated z2m instances won't work." based on your previous statement. I will play around with it and see what happens. Unfortunately I am not very familiar with ZigBee in general. I just thought, as it is straightforward to run two different WiFi Access points, with two different WiFi cards, on the same computer, this might work for ZigBee with two coordinators as well.

cunning wolf Jun 29, 2020, 9:09 PM

#

Well, no. Because you have a single add-on running Z2M and it's not designed for that purpose.

#

You could raise a feature request or do a PR yourself if you're so inclined... but yours is a bit of an edge case, so it's unlikely to be developed unless you do it yourself.

clear gust Jun 29, 2020, 9:20 PM

#

@cunning wolf: OK, get it. Thanks. Well, the root of my problem is that the three Heiman sirens, which in particular work really well as MQTT-controlled sirens, act also as router. But they don't work very reliable as a router in the network. My theory why they cause problems is that they use the ZLL protocol, which is a subset of the full Zigbee protocol. They can repeat/route ZLL compliant messages but not full ZigBee messages. I have found this interesting post on this topic: https://community.home-assistant.io/t/aqara-motion-sensors-with-zigbee2mqtt-unresponsive-after-a-few-hours-need-constant-re-pairing/206515/5?u=star314

thick sapphire Jun 29, 2020, 11:18 PM

#

Team, I have successfully install MariaDB and PhPMyAdmin Add-ons and they work great. I am currently having issues to get node red to communicate with the DB. I install the MySQL pallet and it can not connect. Maybe I have the wrong IP address or some stupid setting I over looked. Any help would be appreciated

wind trench Jun 30, 2020, 12:25 AM

#

Hi community, I have installed duck DNS following the instructions in the add on documentation and it is working fine for HTTP: However HTTPS is throwing an error when I try to access it. ERR_SSL_PROTOCOL_ERROR. I have set accept terms to true and don't see any errors in the add on log. On my router I have port forward 8123 to the HA instance. Are there further steps I need to take?

sly kindle Jun 30, 2020, 12:59 AM

#

@wind trench sounds like you are missing the http: configuration

wind trench Jun 30, 2020, 1:13 AM

#

Hey @sly kindle Thank you for that. Yes I found a blog post on the configuration.ymal file entry. Put that in and working eternally with HTTPS but now when I access locally I am getting a connection reset error. Does this look correct?

sly kindle Jun 30, 2020, 1:14 AM

#

locally you should be using https:// too

wind trench Jun 30, 2020, 1:14 AM

#

http:
base_url: https://myhost.duckdns.org:8123
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem+

sly kindle Jun 30, 2020, 1:15 AM

#

base_url does not belong there anymore

wind trench Jun 30, 2020, 1:15 AM

#

Locally I get t o the log in via https ok but then when actually logging in it get reset

sly kindle Jun 30, 2020, 1:15 AM

#

you would enter your duckdns URL in configuration > general in the UI