#add-ons-archived

1 messages · Page 20 of 1

weary stratus
#

I just realized partial restore was a thing, so i restored NPM. But the SSL cert still doesn't work. When I click Test Server Reachability, I get Communication with the API failed, is NPM running correctly?.

# 
[2/13/2024] [9:38:44 AM] [SSL      ] › ℹ  info      Testing http challenge for example.no
Uncaught SyntaxError: Unexpected end of JSON input

FROM
2024/02/13 09:38:45 [error] 225#225: *1 upstream prematurely closed connection while reading response header from upstream, client: 192.168.1.6, server: nginxproxymanager, request: "GET /api/nginx/certificates/test-http?domains=%5B%22example.no%22%5D HTTP/1.1", upstream: "http://127.0.0.1:3000/nginx/certificates/test-http?domains=%5B%22example.no%22%5D", host: "192.168.1.3:81", referrer: "http://192.168.1.3:81/nginx/certificates"
JSON.parse (<anonymous>)IncomingMessage.<anonymous> (/opt/nginx-proxy-manager/internal/certificate.js:1178:31)IncomingMessage.emit (node:events:529:35)endReadableNT (node:internal/streams/readable:1400:12)process.processTicksAndRejections (node:internal/process/task_queues:82:21)[09:38:45] INFO: Service Nginx Proxy Manager exited with code 256 (by signal 5)
stone harness
#

Glad if anyone knows any help 🙂

elder schooner
#

Which wifi_connector add-on?

north falcon
#

Does someone know how to add a data point to the influx db to an existing entity? I tried it to the chronograf interface but it request " <mearuement>, <tag_key>=<tag_value>...."

slim lark
bitter skiff
#

Have you tried using a v6 address?

slim lark
#

Adding a second record seems to work for the IP resolving. I first tried to replace the ipv4 address with the ipv6 address, which did not work.

So now I have two hosts with the domain and with an ipv4 and ipv6 address. I still have to do some troubleshooting but I think I am on the right track

#

thx

river wharfBOT
#

@slim lark I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
slim lark
#

should HTTPS queries be resolved differently?

ocean kernel
#

hey guys, i know this is an unsupported way to do things, but i kinda NEED locks... so, im trying to use portainer on HassOS. problem is, file system appears to be write locked from every angle on portainer, so, i cant create that a homebridge container.

What is the least bad practice while doing something like this? any folders i specifically should point to for holding container config? i dont want to go changing file/folder permissions to force this to work like i usually do, trying to build out as close to best as i can while still retaining core funstionality (like my locks 🙂 )

elder schooner
#

Not using HAOS and migrating to a container install is the least bad practice

jade wing
#

Portainer will ensure an unhealthy HAOS host, and things will stop working

humble tiger
#

I am using appdaemon to make a tablet dashboard but I am currently really struggling to make a file in the dasboards directory any advice?

#

or really how to access the directory in general

ocean kernel
ocean kernel
humble tiger
#

its just more that I want a nice looking dashboard

ocean kernel
#

so, use mushroom

#

to me, it looks like youre trying to jump through the hoops others have already jumped through and found alternative methods for.

humble tiger
#

no idea what that is I just used the first thing that came up when doing research

ocean kernel
#

mushroomn strategy is a HACS addon. it replaces the lovelace style ui with a more bundled, softer looking version.

install HACS, look up MUSHROOM, download and read what to do. im willing to bet it pushes towards what you might want.

jade wing
#

Mushroom is a custom card not an add-on

ocean kernel
#

i didnt call mushroom an add onm

#

i called HACS an add on

#

oh

viscid orchid
#

which it isn't

ocean kernel
#

whoops... yeah i did.

viscid orchid
#

mushroomn strategy is a HACS addon

#

so much wrong 🙂

ocean kernel
#

i always forget the sensitivity of terminology here...

viscid orchid
#

it's not just pedantic, folks who don't know better will go off in the weeds looking for the wrong thing in the wrong place, and then ask questions that don't make any sense

ocean kernel
#

HACS is a ... i dont know, not an add on... an integration?

viscid orchid
#

yes, it is an integration

ocean kernel
#

that allows other packages to be installed?

river wharfBOT
#

#integrations-archived integrate Home Assistant with devices or services, or provide functionality within Home Assistant.

#add-ons-archived provide additional software or services, which an integration could possibility integrate with. Add-ons are for Home Assistant OS and Supervised only, other install methods can install software other ways.

viscid orchid
#

it's just a downloader. it downloads things, that's it

ocean kernel
#

i mean, byu that definition, MQTT is an integration and not an add on... yet, its definitely in the add-on store

jade wing
#

Well, yes, but no

ocean kernel
#

well, no but yes

jade wing
#

Mosquitto is and add-on, the MQTT broker

viscid orchid
#

there are two parts - the server, which is an addon and an integration that connects to it

#

this is why it's helpful to use the right terminology, lest you say things like that 🙂

ocean kernel
#

anyway... terminology.. .i apologize for categorizing the thing in the wrong ethereal space... moving on...

HACS to MUSHROOM will get you where you probably want to go... and we can move on from arguing over the nomenclature specific to this ecosphere

#

glad you guys were so willing to help him while holding your tongues so vehemently while scolding me for saying the wrong word... thats a LOT of lines dedicated to correcting one mistake and 0 words dedicated to helping the person who asked the question...

#

EFF THIS TINY KEYBOARD!!!!

humble tiger
#

Thank you so much for your help @ocean kernel

sly kindle
#

@ocean kernel it's an attempt to stop confusion from spreading to yet another person

humble tiger
#

with mushroom is there any way to make light dimmers a vertical bar instead of a horizontal one

jade wing
ocean kernel
#

and, i think, maybe just 1 mod jumping on me is enough. you all dont need to gang up.

#

(there is no need to differentiate if one of the people responding was an admin not a mod... its all the same from here)

elder schooner
weary stratus
#

I hope i am in there right place. Trying to get support for Vaultwarden. I am running it on a supervised homeassitant install. I can access vaultwarden via my web browser addon and through URL from my computer. I cannot access it through the bitwarden app on my PC or iphone. It says am SSL error has occured and a secure connection to the server cannot be made. I am also using duckdns

elder schooner
#

Can you access the web ui via the DuckDNS address without SSL warnings in your browser?

weary stratus
#

yes

elder schooner
#

From your phone's browser too?

weary stratus
#

it says its not private and i have to trsut it but then i can get it to go to the page

#

phone and pc

#

phone browser and pc browser

elder schooner
#

Sounds like a SSL issue indeed. The certificate is not valid for the domain

#

Or not from a trusted source

weary stratus
#

i am not completely up on all this stuff. but i think the SSL is handles with duckdns right?

#

everything was working fine a couple weeks ago and then just stopped.

#

any ideas how I can fix it? I like the service

#

when its working...

elder schooner
#

Vaultwarden should work as soon as the certificate is fixed. It insists on a valid and trusted one.
But I don't use DuckDNS, you might have to wait for someone familiar with that.

weary stratus
#

Thank you

ocean kernel
weary stratus
#

nope. Didn't know there was sucha thing

ocean kernel
#

run it through there. itll take a couple minutes

#

it might even shed some light on where your issue is

#

something else to do is to check when the certificate was issued/expires

#

if you have your old cert cached, look at its credentials and see when they expired. you may have to go through the "letsencrypt" process again (its been a LONG time since ive messed with hosting apps inside of HA. its a lot easier to run everything as individual containers.)

weary stratus
#

We were able to retrieve a certificate for this site, but the domain names listed in it do not match the domain name you requested us to inspect. It's possible that:

The web site does not use SSL, but shares an IP address with some other site that does.
The web site no longer exists, yet the domain name still points to the old IP address, where some other site is now hosted.
The web site uses a content delivery network (CDN) that does not support SSL.
The domain name is an alias for a web site whose main name is different, but the alias was not included in the certificate by mistake.
#

None of the common names in the certificate match the name that was entered (website.duckdns.org). You may receive an error when accessing this site in a web browser.

ocean kernel
weary stratus
#

I am not following lol

#

How do I correct this issue?

ocean kernel
#

what youre trying to do requires all of your information from point a to point b and back to be encrypted. to enforce that encryption, you issue a certificate which is then signed by a third party guaranteeing that when you type in mysite.com it goes to mysite.com. instead, yours points to yoursite.com. check to make sure your public IP matches where your DNS forwarder is sending your site. (make sure that mysite.com points ultimately to your networks public IP address (go to ipchicken.com to check public IP). if all of that matches, make sure your internal network handles your data correctly so that something like traefik or something like pfsense handles all the port forwarding correctly.

#

or, since you mentioned duckDNS, my guess is that their second scenario is more likely... your IP address changed and you havent informed your DNS forwarder

#

which is part of issue 1, but more explicit.

weary stratus
#

okay. I am going to look into this. let me check it out. Thank you so much

jade wing
ocean kernel
#

weird... why cant i like your comment tinkerer?

karmic vale
#

Does anyone know how the official SSH Addon for HASS https://github.com/hassio-addons/addon-ssh "Limits login attempts to hold off brute-force attacks better." ?

I've got a script that needs to connect several times via SSH to perform a single command, and then disconnect. Each connection is authenticated and successful but every 5th connection gets stalled and "Connection reset by peer" after several minutes, slowing down the execution time of the script and hindering it's functionality as only some of the commands are executed... I think I want to change the conditions of that anti-brute-force configuration to be a little more lenient to my very specific host. Does anyone know if this is possible?

weary stratus
#

it matches with duckdns

jade wing
#

Does Vaultwarden handle SSL directly?

weary stratus
#

I think thats handled by letsencrypt (duckdns)

jade wing
#

Looks like you have to point it at your certs

elder schooner
#

Vaultwarden might need a restart when the local certificates are renewed 🤔

#

But not sure about that. Mine is handled by a reverse proxy.

weary stratus
#

log_level: info
ssl: false
certfile: fullchain.pem
keyfile: privkey.pem
request_size_limit: 10485760

#

the page you took me to has SSl: fasle. Mine is true

#

everything else looks right in configuration

jade wing
#

Try restarting the add-on

weary stratus
#

Yeah. I did that. I uninstalled it and reinstalled

#

Im wondering if my wifi setup is creating issues. I havean att modem router combo, so I shut off their router part and only use it as a passthrough. I had a software update that reset my settings and was getting a double nat. Everything fixed now, but this issue

#

ive sense tried reinstalling the app, and even creating a new duckdns url. nothing

autumn ether
#

hi, i currently struggle to setup nextcloud with mariadb. i have mariadb running on my home assistant and when nextcloud is running, the log refers to the manual setup to get it running with mariadb. i followed the documentation of the nextcloud add-on how to use mariadb with it and applied the credentials in the mariadb config:
https://imgur.com/vGeaRsl
ive restarted my home assistant, mariadb, and nextcloud. am i overseeing something? thanks in advance!

dense vector
#

Does anyone have any experience with linking Sonarr/Radarr from HA to Seedbox and then to a NAS? I think the first bit is relatively simple, but I've had some issues finding good documentation on the last part.

weary stratus
#

DUDE. I figured it out

#

Tinker and RA, i could about kiss you guys. thank you so much

viscid orchid
#

Is there a 'buy me a kiss' sponsorship option?

elder schooner
ocean kernel
#

Tinker, wanna start an onlyfans with me?

swift meteor
#

Hey @lime girder , I feel awkward pinging you for this (and a little terrified since it seems the name you put on Github no longer matches Discord's new format, so I hope I got the right guy here)
I'm trying to get your AMR2MQTT addon working. It's close, I think.

So first, details. I bought this SDR because the brand and chipset seem to be well known to the SDR community to work correctly.
My meter is an R300, but I think for the issue I'm having, that is irrelevant. (I'd be glad to send you the manual if you ask though)
My log: https://hastebin.com/share/vawefohoka.yaml

I am running Home Assistant through a QEMU virtual machine managed by Proxmox. I have the SDR setup to pass-through to the VM.

As you can see, I'm getting some kind of Signal caught, exiting! error, which is likely related to the rtlsdr_demod_write_reg failed with -9 later on.
Looking into that rtlsdr_demod_write_reg error, I found this. Sounds like a USB level issue. Unfortunately, everything I look up talks about error code -7 but nothing about -9. I'll have to keep digging but I'm getting a suspicion this may be a red herring.

Reading around I saw that SDRs should show up under /dev/rtl, but that directory doesn't exist in the VM.
So at this point I'm trying to think through this... could I be missing a kernel module?

river wharfBOT
#

@weary stratus I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
river wharfBOT
#

@nova lagoon I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
wise pelican
#

Having some trouble with MQTT communicating with the Ring-MQTT add on. It was all working fine for a week and I’ve since been getting errors in the log of the MQTT add on. They go away when I disable the Ring-MQTT add on but haven’t been able to find a fix to get them playing nicely again. Am I right in thinking it’s an authentication issue? Any help or guidance would be fantastic. The error im getting is this…

172.30.32.2:54110 on port 1883.
2024-02-14 16:39:24: Client <unknown> closed its connection.

jade wing
#

Those aren't errors, those are just informational

supple grove
jade wing
#

That'd be a good idea, and maybe one decade that'll happen ablobjoy

wise pelican
cunning jay
#

Hello, I do not see the addition of an addon in the Home Assistant settings. I installed it in a docker container. I think I only installed the core and not the supervisor. Do you know how I can fix this problem without reinstalling everything?
Thanks in advance

supple grove
cunning jay
#

so to upgrade to a compatible version I have to reinstall everything?

supple grove
#

You can take a backup in HA and restore it later. I recommend sticking to docker and install addons the docker way yourself. Addons are just fancy albeit restrictive docker containers.

cunning jay
#

I found it more practical to manage everything in home assistant, but with portainer it should do it

lethal mist
cursive dragon
#

Trying to install diyHue, and keep getting an error about tarballs and stuff

#

The command '/bin/bash -o pipefail -c curl -J -L -o $diyhue.tar.gz "https://github.com/diyhue/diyHue/archive/refs/heads/master.tar.gz" && tar xzvf $diyhue.tar.gz --strip-components=1 -C diyhue && rm -rf $diyhue.tar.gz && pip3 install -r /diyhue/requirements.txt --no-cache-dir' returned a non-zero code: 1

#

Not sure what's wrong, sorry.. Not much luck with the googles

swift meteor
#

Hey @CentralCommand , I feel awkward

cursive dragon
#

Did you ever figure this out?

supple grove
cursive dragon
#

I did start there though

supple grove
cursive dragon
#

Seems no one is able to install it right now

#

Yeah, this is the official version

#

So, it seems the repository is just FUBAR until someone checks their slack

crisp wyvern
#

Hey guys, probably an issue that come up before but my searching hasn't really found much. Trying to search for certs issues is a bit of a minefield. So I'm setting up my HAOS, moving from a containerised setup. I've added nginx and letsencrypt to handle the UI encryption for external connections. I've got Lets Encrypt doing its thing and have a cert. It dumps it to a /data/letsencrypt directory for the domain.

#

Nginx wants it in /ssl/. I don't want to manually move the files, so maybe a symlink would work to the /ssl/ location. But seem like this should maybe just work??

#

without me having to link them up manually.

jade wing
#

Symlink won't work

#

AFAIK they should be available under /ssl/ though

crisp wyvern
#

stat: can't stat '/ssl//data/letsencrypt/live/*.domain.co.uk/fullchain.pem': No such file or directory

#

is the nginx log

elder schooner
#

There is a double /

crisp wyvern
#

it wants to add the /ssl/

jade wing
#

Try just fullchain.pem

crisp wyvern
#

ah ok, let me check, I just used what lets encrypt put in it's log output.

#

seems to have started, but still cant get to https, I'll have a play, as the ssl error is not gone so thanks

untold relic
#

Quick noob question. Have enabled mutiprotocol support on my skyconnect. Do I still have both the OpenThread Border Router add-on AND the Silicon Labs Multiprotocol add-on running at the same time, or do I just need the newly added Silicon Labs Multiprotocol add-on running with the original OpenThread Border Router add-on stopped?

#

My google foo has let me down on this one, and readin the documentation over and over does not reveal the answer to me. 😦

brittle night
untold relic
#

roger roger, backing out

#

🙂

#

I'll buy a second skyconnect. 🙂

brittle night
#

rip

untold relic
#

ok, successfully backed out, zigbee network back up and running. 🙂

brittle night
#

that's my preferred zigbee coordinator then you could use the skyconnect to play with w/e

untold relic
#

to be honest, i think i'll just do what the docs say and get a second skyconnect, let the thread border router use that one and leave this first one to the zigbee network. 🙂

languid cradle
#

how i access to mariadb database, in which path or location

jade wing
#

You're using the MariaDB add-on?

neon snow
#

Hello, I am having trouble finding a way to develop a Home Assistant Add-on on my windows pc. I would like to create and test an Add-on on my windows machine but I am not sure how to go about doing this. Thanks in advance.

jade wing
tame dagger
#

I just found the "Assist Microphone" that other day, I'm liking it so far but i'm missing the "media player" part so i can use TTS to it as well. any change to add that to the add-one?

weary stratus
#

Hello, I'm trying to delete a single datapoint from InfluxDB via 'Explore' but i am not succeeding. Is there some manual on how to do that?

floral quail
#

Im using generic camera addon and the camera configure on it i still losing feed. Always get Unable to read frames from ffmpeg process. Any idea

jade wing
#

Don't you mean the generic camera integration?

gentle bane
#

Hello, i have a problem with the following Add-On : Advanced SSH & Web Terminal

#

I installed this addon but it is not starting, the addon it self seems started with cpu usage and so on when i hit start. But when i try to open it from the frontend it say, the addons seems not to be started right now, do you wanna try again, any ideas ?

feral maple
#

Any errors in the logs tab on the addon? Did you remember to complete the Configuration tab?

gentle bane
#

Okay, seems solved, i needed to add a password in plain text, omg this is bit too much for me actually 😄

feral maple
#

Remember to read the installation instructions available with every Add-on

hardy finch
# north falcon Does someone know how to add a data point to the influx db to an existing entity...

Did you find an answer to this? I am looking to expand my sensor-data with historical data I have in csv format. But I can not wrap my head around the "Write Data". I tried to do it as the docs for the line protocol say. But it won't work.
I am trying with someting like this in a file and gziped:

W,domain=sensor,entity_id=sma_grid_power,friendly_name="SMA Grid Power" value=359 1704874500
W,domain=sensor,entity_id=sma_grid_power,friendly_name="SMA Grid Power" value=471 1704874800```
tender crypt
candid berry
#

I'm going to be using an ESP32 board to upgrade a google home mini, does anyone know of a way to combine the voice assistant and speaker functions? i.e. being able to play music and give it commands without having to change settings between uses

elder schooner
candid berry
#

ok thank you!

steep harbor
#

Looks like otbr just was updated. I tried to update but getting this error.

Can't install homeassistant/amd64-addon-otbr:2.4.7: 404 Client Error for http+docker://localhost/v1.43/images/create?tag=2.4.7&fromImage=homeassistant%2Famd64-addon-otbr&platform=linux%2Famd64: Not Found ("manifest for homeassistant/amd64-addon-otbr:2.4.7 not found: manifest unknown: manifest unknown")

toxic charm
#

Hi, I'm total noob just starting with HA and I have troubles with MQTT IO add-on config file. I get fatal error: "Seems like the configured configuration file does not exists". I saved my config file as /homeassistant/mqtt-io/config.yml and this path or just /mqtt-io/config.yml as path doesn't work. Does anyone know how to solve this?

magic birch
#

Hi,

I have installed and setup the Advanced SSH & Web Terminal add-on with an SSH key and

allow_remote_port_forwarding: true
allow_tcp_forwarding: true

for VS Code SSH access. The connection keeps terminating during handshake.

#

Can a mod please remove this?

#

Thanks. The wrong one was removed though. It was my initial message. 😄

elder schooner
#

Only one wish per day GhostHehe

magic birch
#

Haha

brittle night
magic birch
elder schooner
#

Not forbidden, but...

river wharfBOT
#

Please use a code share site to share code or logs, for example:

Please don't use Pastebin, since it can randomly add spaces to the main view. Please also don't share text as images since it makes it harder for people to help you. Remember that others may have colour blindness, impaired vision, etc.

magic birch
#

Ok. Thanks for that.

cursive dragon
north falcon
#

Yes I found a solution. I first did an export with influx_inspect export to check exactly how my data is formated:

influx write W,domain=sensor,entity_id=NAME IDENTITY,_field=value value=433 TIME_IN_NS

river wharfBOT
#

@lusty helm I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
lusty helm
#

For the RPC shutdown addon, what password does it want? I put my microsoft login and it doesnt work

elder schooner
#

That one you are using at the Windows login screen

lusty helm
#

it autologins

#

but when I lock it, then its just my name and a pin which doesnt work for HA

high root
#

Hi, I'm very new to HA and I got a Problem with the 'Advanced SSH & Web Terminal'. Always when I try to start the addon it doesn't work and says it hasn't started yet. In the protocol it says 'exec /init: input/output error'. I already try to install it again but this didn't work. Does anyone know how to solve this?

elder schooner
#

Have you configured and saved the required username and password/SSH key settings?

high root
#

Yes

lofty solar
#

Noob question:
I want to run an init command inside addon (docker) when it starts. How?

viscid orchid
#

You probably can't

#

But it's such a general question...

lofty solar
#

ik that I can run it manually from "Advanced SSH & Web Terminal" but I need to do it at certain other addon start. And that addon crashes often unfortunately.

viscid orchid
#

You can't

feral maple
lofty solar
#

oof

#

I'm guessing there is no simple, official way to do it

#

..since I can think of monstrosity like:
create a command entity that ssh from homeassistant container into SSH container that executes the target command (using docker cli). But I would like to avoid that.

viscid orchid
#

You seem to have jumped right to a super hacky solution rather then solicit actual solutions to whatever problem you're facing

elder schooner
#

Whatever the actual problem is

lofty solar
viscid orchid
#

You keep focusing on this hacky workaround. What is the actual problem you're trying to solve?

#

You cannot do what you're trying to do

lofty solar
#

the problem in this case is there is a certain bug in addon and I want to workaround it by running a simple one linear. Without waiting for dev to show up or forking the entire addon myself and maintaining it later.

supple grove
#

Which addon? What bug?

lofty solar
supple grove
lofty solar
supple grove
#

That's one of the reasons I don't like or use addons. You're very reliant on the maintainers and their choices. Not necessarily their fault. It's unfeasible to have a million options and choices for all use cases.

lofty solar
#

I like the part where that I rely on maintainer to do the work. Doing custom stuff is what usually get me in maintenance hell sooner or later. Not just in case of addons or HA. 😉

#

..and speaking about forks (in this case) I'm gonna suggest to use the one called "Threadfin" (https://github.com/Threadfin/Threadfin/) instead of those. It looks properly mainteined and has more stars already.

cursive dragon
#

@tender crypt they fixed it! You can install it now 😄

toxic charm
elder schooner
#

If you created a subdirectory in /config or /homeassistant

toxic charm
#

Will try. Thanks a lot

high root
feral maple
#

Sounds a bit like a disk error, I would try a fresh SD card, then restore your backup.

high root
#

Thanks I try that.

tender crypt
arctic canopy
#

hi guys. whats the process for adding env values? having no luck once the addon is built

#

env:

  • xxxx: xxxxxxx
supple grove
supple grove
#

Don't delete messages 😦

arctic canopy
viscid orchid
#

We know what you did...

dreamy cloud
#

Created 3 instances of Zigbee2mqtt add-ons, in order to use 3 coordinators.
Everything works perefctly except that each add-ons takes 2GB of RAM immidiately before there are even added devices.
After installing the 3 same-add-ons, Proxmox shows 6GB of 8GB RAM are in use.
Anyway around that?

#

I guess I shouldn't add the 4th one as I planned...

#

There's a better way of adding more zigbee2mqtt instances?

toxic charm
#

I'm having troubles with finding sensors with MQTT IO add-on. I get error: w1thermsensor.errors.NoSensorFoundError:
Could not find sensor of type DS18B20 with id 28-d6f4f91d64ff
Please check cabling and check your /boot/config.txt for
dtoverlay=w1-gpio
I have done both. What else could be wrong?

viscid orchid
dreamy cloud
#

I have thick walls in my flat and one zigbee mesh was never stable enough. Some devices randomly disconnected, and when I had actions for multiple devices, like turn off all lights, they turned off one by one with some delay until the last one.

With my new approach of multiple coordinates, everything works perefectly, no delay at all when turning all devices on or off at once. And everything stabely connected with high LQI.
Apart from the RAM usage, it works so much better than before

tribal sorrel
dreamy cloud
#

will it take less RAM than the add-on in HA?

tribal sorrel
#

mine uses 150 MiB of RAM

supple grove
#

Here's what docker stats says about my container

CONTAINER ID   NAME                      CPU %     MEM USAGE / LIMIT     MEM %     NET I/O           BLOCK I/O         PIDS
e37f4d810d0b   zigbee2mqtt               0.65%     127.8MiB / 7.755GiB   1.61%     2.19GB / 2.31GB   128MB / 155MB     12

I doubt the addon willl use more but the numbers are already kinda insignificant for both.

viscid orchid
#

Mine uses 141MB

#

and I have >100 devices

dreamy cloud
#

The add-on adds 2GB of RAM just after the install, before adding any devices

supple grove
#

Adds where? How did you measure that?

dreamy cloud
#

Proxmox > VM > Summary > Memory usage

#

I could see it jumps with each zignee2mqtt add-on that I've added

supple grove
dreamy cloud
#

I had my previous setup with one zigbee2mqtt instnace, hundreds of devices, and it took much less RAM.

#

but that had only 1 add on

#

What I found out is that the installation of the add-on itself is what makes the memory jumps

supple grove
dreamy cloud
#

in HA > Hardware > Memory
It says 1 GB / 8 GB

grim nebula
#

doing the same, now running 3 z2m instances after having 1 instance and ~200 devices (almost all of them routers)

dreamy cloud
#

you run all of them as add-ons inside HA? Did you notice high RAM usage in proxmox?

grim nebula
#

yes and i did not notice because i did not look 😄

#

but also proxmox here

dreamy cloud
#

That's one way of solving it

supple grove
#

If you're so worried about memory usage don't give your VM more than it needs and try to come to terms with the fact that PVE's memory stat does not show what you think it does. At least for linux.

grim nebula
#

locking at docker stats shows ~90MiB per instance

#

so nothing to talk about

dreamy cloud
#

I changed HA VM memory from 8GB to 7GB, and for some reason the usage went down too, all the way back to 2GB

#

with the 3 instances running

#

So I'll be able to create that 4th zigbee2mqtt instance after all, and who knows, maybe i'll break a record in coordinators.

supple grove
#

You rarely need more than 4G

toxic charm
potent grove
#

Hi guys! I'm a newbie here. I'm trying to run InfluxDB on my home assistant, but I don't know why I am unable to start it; every time it fails. Here is the log I have:

Can someone help me? 🙏

supple grove
#

Here is the log I have
🧐

river wharfBOT
#

@potent grove Please use a code share site to share code or logs, for example:

Please don't use Pastebin, since it can randomly add spaces to the main view. Please also don't share text as images since it makes it harder for people to help you. Remember that others may have colour blindness, impaired vision, etc.

potent grove
supple grove
#

I don't see anything problematic here other than the Listener at 127.0.0.1:8088 failed failed to accept a connection... which seems to be normal. Happens for me too and it's accessible.

potent grove
#

So strange :(. Everytime I try to start it, I have to wait few minutes and then nothing happen

supple grove
#

What does it say if you click the open web ui button?

potent grove
#

Where is this button ? I’m looking for it but can’t find it

#

I tried to start it from my computer instead of my phone but nothing changed, it is starting and then stopping

#

So strange, it looks like I'm not even able to install other add on ! I tried to install Samba Share and I had the same issue ! When I press the start button, it's loading and then nothing happens

#

could it be because of a superuser/admin access or something like this ?

potent grove
edgy dew
#

Hi, I'm runnig the duckdns addon and can connect fine over my home network when using the duckdns subdomain. I can also connect from other WiFi networks. I can't however connect from my mobile data / tethering. Has anyone else run into similar issues?

sly kindle
#

@edgy dewIf this is the same when using mobile browser or companion app, it could be your provider is doing something funky there

edgy dew
#

although since it is working on other wifi networks, I'm guessing more likely an issue with my mobile data provider

#

just tested it with a vpn and it works fine on mobile data now

weary stratus
#

I've had the SD card of my raspberry pi on which HA has been running die on me. Took a new card, installed HA, restored from a full back, now trying to get it back to working again. For whatever reason, I can't start my Mosquitto broker add-on, and it's not showing any obvious errors. Anyone an idea what steps to take to troubleshoot?

elder schooner
#

Have you rebooted the Pi (not just restarted HA) after restoring the backup?

weary stratus
#

hmm no, lemme try that one

elder schooner
#

Add-ons often behave weird without that reboot.

weary stratus
#

well, that seems to have worked. wouldn't have thought about it lol

#

but it kinda feels like my HA is slow to load... actually clicking on the Add-on window had it load for like 5+ seconds

plush slate
#

Hello, I am trying to port forward my HA to the internet using this guide: https://www.speaktothegeek.co.uk/2022/07/tutorial-home-assistant-secure-remote-access/ which is using the DuckDNS and NGINX Addon. I am port forwarding the port 443 and 8126 from WAN connections to the ip of my HA server on a mikrotik router.
I am unsuccesful. When connecting with the duckdns domain i get connection refused. When i connect to https://mylocalip:8126 i get a certificate error. Could anyone help me out? Is the issue with me being too stupid to port forward on a mikrotik? Or is it a certificate issue?

#

I think its a port forwarding issue, but i have no clue on how to fix it. It worked on my old ISP router but when i got this new one, i cant get it to work

potent grove
supple grove
#

Like I said, there's nothing to see.

supple grove
river wharfBOT
#

Please use imgur or other image sharing web sites, and share the link here.

Image posting is blocked in most channels to discourage people from sharing text as images. Sharing text as images assumes that everybody sees the world as you do, which isn't the case. Some people are colour blind, or have visual impairment that means they can't make sense of an image of text.

supple grove
#

I'd also suggest you run ha supervisor repair via SSH, wait 10 minutes, then reboot and try again to start and the open web ui and check logs.

elder schooner
thorny nexus
#

Zigbee2MQTT addod, front-end not working. Re-installed addon updated HA. Changed browser. Stll cant resolve this issue. Can someone help?

jade wing
#

#zigbee-archived can better help, but look at the log for the add-on as we'll need that to help you (assuming the details in it don't help you fix it)

potent grove
#

And even if I wait a few minutes, nothing happens

potent grove
elder schooner
# potent grove Yes I did

Did you reboot the host (not just restarting HA) after that restore? Add-ons often misbehave without such reboot.

potent grove
potent grove
elder schooner
#

No. That might cause data corruption.
Settings - dotsvertical menu - Restart Home Assistant - Advanced options - Reboot system

potent grove
#

Ok I’ll do it right now. Thanks a lot !

supple grove
#

Would be helpful non cropped and in english

potent grove
#

Thanks a lot guys !!!

stone harness
#

i want to write a python addon, in which i want to call iw via subprocess module. How can i properly install iw in the dockerfile?

jade wing
plush slate
#

Hello, I am trying to port forward my HA to the internet using this guide: https://www.speaktothegeek.co.uk/2022/07/tutorial-home-assistant-secure-remote-access/ which is using the DuckDNS and NGINX Addon. I am port forwarding the port 443 and 8126 from WAN connections to the ip of my HA server on a mikrotik router.
I am unsuccesful. When connecting with the duckdns domain i get connection refused. When i connect to https://mylocalip:8126 i get a certificate error. Could anyone help me out? Is the issue with me being too stupid to port forward on a mikrotik? Or is it a certificate issue?

jade wing
#

You don't need port 8126 - there should only be one port, forwarded to NGINX

#

Forward 443 on the router to 8126 on the proxy

rare marsh
#

Is anyone using the Unifi Network Application add on? I am wondering how the experience is compared to running on a Cloudkey or Pi.

plush slate
#

I would send the screenshot of the rule but i dont have image permissions

river wharfBOT
#

@plush slate Please use imgur or other image sharing web sites, and share the link here.

Image posting is blocked in most channels to discourage people from sharing text as images. Sharing text as images assumes that everybody sees the world as you do, which isn't the case. Some people are colour blind, or have visual impairment that means they can't make sense of an image of text.

gentle bane
#

Hi guys i have a problem. I installed HACS, this is working half / half.

#

I wanted to add https://github.com/Deejayfool/hass-shutter-card over HACS, i tried to add the repo manually, then it says, repo already exist. When i search in HACS i dont find anything with "shutter", "hass" or "deejayfool" for example. No idea why, and i have this not visual view in hacs, not as they promote on there website, seems like text only or something, what do i have to do here ?

jade wing
#

That's not a topic for this channel 😉

river wharfBOT
#
The topic of this channel is:

HA OS Add-on support! Additional, standalone, applications that can run on Home Assistant OS. Your user profile needs to have Advanced Mode enabled for some add-ons to be visible in the store.

jade wing
#

Cards aren't add-ons, and HACS doesn't have any add-ons

mental cargo
#

Hi, i have a nanoleaf stripe and no Thread Router. How can i add the stripe to my Homeassistant?

My Homeassistant run at a Raspberry 4 Model B with a 32-bit OS.

calm needle
#

Is there an easy template / guide on how to get sensor data from z-wave (z-wave JS UI) into influxdb and grafana?

river wharfBOT
#

@sick swallow I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
sick swallow
#

I've followed a youtube tutorial and it worked before, I reset my pi and now it doesnt work.. I have the configuration set correct yet it still wont start and when I try to open web ui it says 502 bad gateway

jade wing
#

I've followed a youtube tutorial and it

stone glen
#

Hi! I'm trying to create my custom add-on and want to use internal MQTT service. Like following:

export MQTT_HOST=$(bashio::services mqtt "host")
export MQTT_USER=$(bashio::services mqtt "username")
export MQTT_PASSWORD=$(bashio::services mqtt "password")

However, I'm getting this error:
ERROR: Got unexpected response from the API: No access to mqtt service!
Any help for how to get this working is appreciated!

jade wing
stone glen
mental cargo
#

Hi, i have a nanoleaf stripe and no Thread Router. How can i add the stripe to my Homeassistant?

My Homeassistant run at a Raspberry 4 Model B with a 32-bit OS.

jade wing
river wharfBOT
#

@vapid socket I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
vapid socket
#

Hey, having problems with AppDaemon addon, any advise?? Can't find anything about this in documentation...

# 
ERROR Error loading secrets file: /config/secrets.yaml
Traceback (most recent call last):
  File "/usr/bin/appdaemon", line 8, in <module>
    sys.exit(main())
             ^^^^^^
  File "/usr/lib/python3.11/site-packages/appdaemon/__main__.py", line 417, in main
    admain.main()
  File "/usr/lib/python3.11/site-packages/appdaemon/__main__.py", line 276, in main
    if "appdaemon" not in config:
       ^^^^^^^^^^^^^^^^^^^^^^^^^
TypeError: argument of type 'NoneType' is not iterable
buoyant stratus
#

Hi there. I'm a HA Core user. I'm wanting to use an addon for Anylist but no corresponding Docker version exists. Is there an easy way to convert an add-on Docker file over to a tradional one? I've been running Docker for a while now and I may be able to piece something together after a good while of struggling but thought I'd ask here to see if there might be something to make the conversion less painful and time consuming.

For reference, this is the add-on I'm talking about:
https://github.com/kevdliu/hassio-addon-anylist/tree/main/anylist

weary stratus
#

More questions: Adguard...

If adults want to get past the filters.. how does one do that?

Eg. My preteen was a little upset his bedrooms Roku couldn't play YouTube but I need it off so the younger preteen won't watch it in the living room.

Or: if my husband or I want to watch adult content that our preteens don't necessarily need access to.

supple grove
river wharfBOT
#

@void hull I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
jade wing
# 
http:
  ssl_certificate: /ssl/fullchain.pem
  ssl_key: /ssl/privkey.pem
``` goes in HA's `configuration.yaml`, not there
brittle night
#

https://github.com/hassio-addons/addon-aircast i've been using this for a while and went to edit the .xml file per the docs and had a hard time finding the file. i eventually found it in /addon_configs (but not inside /config where vscode has access to). i notice none of my other addons store any info there. should i create an issue on github or is this the new directory and others just havent migrated yet?

plush rover
#

I'm having a strange issue with ESPHome devices, specifically media players; this has been working for years and only now just started playing up; when I try to play a media file from the dashboard Media page to an ESPHome media player, the media player is receiving an address for the media file, that contains the Gateway address of the docker bridge network that the supervisor sits on (I'm using HAOS on bare metal).

#

This is what I see in the ESPHome log for hte media player device: http://172.30.232.1:8123/media/local/Doorbell.mp3

#

172.30.232.1 is the docker network named bridge on HAOS

quick trench
#

seems like you're using the wrong url

#

post what you're using to play the media

#

the service_call

plush rover
#

my bad, I thought It's add-on because ESPHome is an add-on

quick trench
#

the esphome addon handles flashing your devices, it does not handle the communication

plush rover
#

gotcha, thanks

quick trench
#

you can run esphome devices without having the addon

plush rover
#

Very interesting, what do they talk to?

quick trench
#

espdevice <-> home assistant

#

esphome -> flash -> espdevice

plush rover
#

Yeah, I get the flashing part, I had no idea the ESPHome devices talk directly to standard HA APIs, I learned something, thanks for that

solemn egret
#

I configured cloudflared with my domain, and for some reason it's blocking my connections from my home network. But accepting them from mobile data or outside my home. Anyone know why might that be? I haven't set any zero trust rules (yet) I know it's not a HA issue tbh, because the domain won't work for a website redirect either. It's a cloudflare setting. Just don't know where to seek help.

elder schooner
#

Are you using a DNS server, directing the URL to the local IP?

#

You might run into some router DNS rebind protection issues in that case

earnest jolt
#

anyone experienced with the tailscale add-on? im trying to enable ssl without using the funnel, because i want to only have local access through tailscale, not public access.

I followed the instructions here:
https://github.com/hassio-addons/addon-tailscale/blob/main/tailscale/DOCS.md

And went for the proxy instructions. in my tailscale account https certificates are enabled and i also added the 3 lines to the configuration.yaml to enable proxy.

After a restart, i go to machine_name.mytailscalesubdomain.ts.net and it works......on http. When i change http to https, i get a ERR_SSL_PROTOCOL_ERROR. With the browser saying it received a invalid answer.

#

the last part of the docs mention that you cant use the normal port to access home assistant anymore... I still can when using the ip address. and when i try to use 443 as port in the browser it gives no results, the standard home assistant port 8123 is "working" as in, it gives the ssl error.

#

help would be super appriciated!

solemn egret
earnest jolt
nimble flame
#

anyone good at esphome?

supple grove
nimble flame
earnest jolt
#

Can it be that tailscale requires you to source your own certificate?

#

Maybe thata why its not working. Enabled proxy in configuration.yaml and enabled https in tailscale dns settings.

#

Thought it would create one for me then

earnest jolt
#

got it working, getting incredibly slow speeds though. and now lost access completely to my home assistant pc

eager pebble
#

How exactly does one do this? I’m looking to call on the adguard home api (running as an add on) from within node-red (also running as an add on).

bitter skiff
#

Which part are you stuck on? The Configuration tab of the AdGuard add-on will let you specify a port to expose

#

You probably don't actually need to do that though from a separate add-on

eager pebble
#

That’s what I had thought, but when I try to ping or call an endpoint it fails.

bitter skiff
#

Set the port in AdGuard and use that, it seems to need that

eager pebble
#

In the adguard addon config? I see 2 fields for ports. The dns port (which I assume the api endpoint would not be listening on) and a web interface port. Is this where I would need to set a port?

bitter skiff
#

yes

eager pebble
#

Port 80 or something else?

bitter skiff
#

You may have something already on 80... Id pick something else

hearty pawn
#

is this the right channel to talk about esphome?

river wharfBOT
bitter skiff
#

^ theyve got a server

hearty pawn
#

excellent. Thanks. I'll hop over there for that.

#

second question: What about Mariadb?

bitter skiff
#

Yup, here

hearty pawn
#

Awesome.

#

So last week I upgraded to an SSD and then afterwards switched over to MariaDB. Things seemed fine with MariaDB at first, but then I ran into initialization issues and intermittent connectivity issues.

#

Sometimes history wouldn't work, and I'd have error messages in the log

#

I have since reverted to the sqlite db, since it was such a consistent problem

#

Anyone else have this issue?

eager pebble
#

@bitter skiff Thanks for the help 🙌

bitter skiff
#

You bet, you're welcome

bitter skiff
hearty pawn
#

All good questions. It's a raspberry pi 4b, I'm using a compatible ssd nvme over usb board

#

The ssd itself, a 256gb inland brand cheapy one from microcenter. It's been solid for the past week other than this issue.

quartz finch
#

hmm, I want to wrap an public docker image into an add-on - but is it just enabling legacy, and then options will be available in the container?

elder schooner
quartz finch
#

doh, thanks

bitter skiff
#

Are you plugged into a powered hub?

river wharfBOT
#

@young egret I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
hearty pawn
# 
sqlalchemy.exc.PendingRollbackError: Can't reconnect until invalid transaction is rolled back.  Please rollback() fully before proceeding (Background on this error at: https://sqlalche.me/e/20/8s2b)
#

I think it'd probably be resolved if I had a fresh db

#

I just don't know where that db lives on the machine

#

I'll try creating a new db with a different name

#

Nope, I see a bunch of log errors

river wharfBOT
#

@hearty pawn I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
supple grove
#

Unknown/unsupported storage engine: InnoDB
😟

hearty pawn
#

Yeah that's disconcerting

supple grove
#

Where is the MySQL server hosted/running on?

hearty pawn
#

this is just the MariaDB add on for home assistant, which I currently am running on a raspberry pi 4b with an SSD

supple grove
hearty pawn
#

it's using a POE Hat

#

Yeah it says it's ok

#

How does one connect to the mariadb instance? I can try to manually connect

supple grove
#

That checks the power to the pi itself but I'm not sure if you can check if a USB device didn't get enough current with it.
I don't use pis myself but I've seen at least twice where a powered hub fixed file system related issues and it's one of the first recommendations for SBC (or at least pi) users with USB powered storage.
You can use the phpMyAdmin addon, the mysql CLI from the SSH addon or if you set a port for the MariaDB addon you can use a client of your choosing. I like HeidiSQL.
Not that there's anything to connect to

Service mariadb exited with code 1 (by signal 0)
I'd recommend plugging that SSD into a powered USB hub and reinstalling the MariadDB addon. Every other way to fix this is kind of messy. What do you use MySQL for?

hearty pawn
#

Right

#

I think this just continues to solidify my plan to migrate away from RPi for this.

magic ledge
#

Where would you begin troubleshooting for this type of error? Did some basic googling but hasn't helped yet.

  • Frigate /w mosquitomqtt
  • IP Camera, live view and recordings work
  • Unable to change entities of the camera via HA
  • My zigbee2mqtt works fine on the same mosquito broker
2024-02-24 20:02:31.342478589  [2024-02-24 16:02:31] frigate.comms.mqtt             ERROR   : Unable to publish to stats: client is not connected
2024-02-24 20:03:13.303778883  [2024-02-24 16:03:13] frigate.comms.mqtt             ERROR   : Unable to publish to events: client is not connected

Edit: My mqtt hostname in frigate config was not set right to match my mosquito hostname. Hope this helps someone.

young egret
#

xcel_itron2mqtt: I'm trying to get the xcel_itron2mqtt add-on to work with my Xcel iTron electricity meter.
After doing the registration tasks (Wifi, ldfi configuration) via xcel.com, the meter is connected to WiFi.
The xcel site says "Meter Setup: Ready to Go"

nmap -p 8081 <meter_ip_address> shows:
8081/tcp open blackice-icecap
which suggests that the meter is connected and listening on the port.

However, when I start the xcel_itron2mqtt add-on, the log file shows:
ERROR: Got unexpected response from the API: Service not enabled

Do I need to wait for Xcel to do something else to enable the API?
Or, do I have a configuration problem?

magic sparrow
#

Looking for some help with Matter server. It will not stay running. below is my log message. Thank you.
[6:08 PM]
18:07:46] FATAL: No primary network interface found!
[02:07:46] WARNING: matter-server service exited with code 1 (by signal 0).
[6:09 PM]
Add-on version: 5.2.0
You are running the latest version of this add-on.
System: Home Assistant OS 11.5 (aarch64 / odroid-n2)
Home Assistant Core: 2024.2.3
Home Assistant Supervisor: 2024.02.0

prisma tendon
#

can someone help me with my motioneye? live feed doesn't get sent from the addon for some weird reason

elder schooner
prisma tendon
#

thanks

limpid wasp
#

Anyone using Hurricane Electric for DNS and the Let's Encrypt addon?

There is an example config using provider 'dns-he', but when starting this addon it comes thru as null in the log. 'dns-he' is not listed as a supported provider on the documentation page, even though the same page has an example showing it. Is this a bug, or a documentation error?

keen pebble
#

Is it possible to setup a Let's Encrypt certificate without having a custom domain as I am currently just using inside my home network?

calm needle
#

Not with let's encrypt

limpid wasp
#

The only way to do internal only without a custom domain is self-signed and then pin trust on your devices... Well, not the only but it's the easiest (alternate is an internal root ca and then issue certs from there). No cert issues at all will issue a certificate to an IP address, or a .local 'domain'. You have to prove domain ownership for a trusted certificate.

limpid wasp
#

On my question, where should I report either a code bug, or documentation bug?

calm raft
#

Hi!
I need to set up a forward proxy server. So that I could do access websites as if I am at home, even though I am not. (curl google.com -x <home ip>:<port>)
Before using the HA, I used openhab and easily solved the problem by installing the Squid proxy server next to the running openhab.
Now that I'm using HA, which is acting like it is an OS itself, I'm struggling to understand if there is an addon for that.
So far I've only managed to access the home device by ssh using ssh and zerotier addons.
Thank you!

jade wing
#

There's the NPM add-on for NGINX

potent bay
#

Hi, any ideas if the mosquitto add-on will preserve the retain'ed messages over reboots? 🙂

keen pebble
#

Is there an add-on that I can use to get a terminal prompt so I can setup symbolic links to get https working with Let's Encrypt certificates? I tried "Advanced SSH & Web Terminal" and keep getting 502: Bad Gateway when I try to Start it

jade wing
#

Why do you need sym links?

#

Links can't work across mounts, across containers, so they're unlikely to help with whatever your problem really is

calm raft
# jade wing There's the NPM add-on for NGINX

Yes, I've seen it, but from the tutorials I can see that it is mostly used otherwise, not as a forward proxy. Besides, I'm not sure nginx is a good choice for setting up a forward proxy that supports ssl

jade wing
#

Works fine for that

keen pebble
#

What I am trying to do is enable https so that I can securely login/access my home assistant remotely.

I have setup dynamic dns, I have added Let's Encrypt and gotten the certificate, but when I try to edit the configuration.yaml and restart I get the following error:

The system cannot restart because the configuration is not valid: Invalid config for 'http' at configuration.yaml, line 15: not a file for dictionary value 'http->ssl_certificate', got '/data/letsencrypt/live/hunttowers.org/fullchain.pem' Invalid config for 'http' at configuration.yaml, line 16: not a file for dictionary value 'http->ssl_key', got '/data/letsencrypt/live/hunttowers.org/privkey.pem'

#

These were the paths in the log of Let's Encrypt

keen pebble
#

I got it to work by allowing the File Editor to access files outside of the configurations. Very odd, but now it works.

drowsy laurel
#

Hi! Im looking for advice on how i should approach the problem of mounting a folder through SFTP into a container running on my hass.io yellow.

I considdered making a crontab inside the container, but I don't know wether this will be removed during updates? How much of the system will usually be reverted back to initial state during updates?

jade wing
#

Again, please explain your goal so people can help you 😉

drowsy laurel
carmine lynx
#

Hello... After a ssd crash, I migrated all (after a full backup) all to a new ssd..
However, I cannot start any of my add-on. 🥺
For instance when I want to start the File Editor add-on, I get the following message https://dpaste.org/vyLS6
Any clue on what I should set-up?

elder schooner
#

Have you rebooted the HAOS host (not just restarting HA) after the restore? Without a reboot add-ons behave weird often

supple grove
#

I read that the restore process is better now but I haven't checked yet. Is there still no message about or fix for this?

carmine lynx
outer drum
#

hello I had a question I have a new home assistant configuration on which I installed duck dns (I am at Bouygues Telecom) the configuration seems to work but only in http not in https, if you have a solution that would be cool

jade wing
#

Enable LetsEncrypt in the add-on and then update the http integration to use the certs - see the docs for the DuckDNS add-on

worthy quest
#

another thing i never managed to secure the login with ssl certificate

#

it would be best if there was a paid service here that could set this up remotely.

jade wing
#

You can just pay for the Nabu Casa cloud service

#

And the forum has people that deliver paid support, some of it even by people who know what they're doing

#

(some just come here to get help with their customers)

worthy quest
#

get the calendar displayed by the waste addon but all the entries of the empties are not displayed although i have included the ics file according to the instructions

sly kindle
#

waste add-on?

#

got a link?

worthy quest
#

waste collection schedule

viscid orchid
#

Pretty sure this will be an integration

worthy quest
jade wing
#

That's not an add-on

icy haven
#

My backups are 20GB and think ti might be my InfluxDB config with the hass DB with an infinity retention policy.

api_version: 1
ssl: false
host: a0d7b954-influxdb
port: 8086
database: hass
username: hass
password: #########
default_measurement: state
tags:
  instance: prod
  source: hass
#

If I set the retention policy to something like 30 days, do I lose my device history states and data?

supple grove
#

Yes and no. The recorder retention only affects HA's database, not influx. There's also still statistical history.

icy haven
#

with my config is statistical history sent to InfluxDB?

#

I really only setup Influxdb because it was suggested by the Brultech GreenEye Gem monitors

#

In influxDB config can an include filter be added for just Brultech GreenEye Gem devices?

supple grove
icy haven
#

Looks like I would have to rename all of them to be able to include just the Brultech GreenEye Gem devices

supple grove
#

🤷

icy haven
#

So I dumped and recreated the DB and added a globs include filter that will catch mostly just the gem devices. Now my backups are 300 mb 🤩

whole egret
#

Is there a way to use the ESPresense Companion App if I'm running Home Assistant through Docker?

#

Never mind 🤦‍♂️ There's a separate Docker container listed right in the main repo

light plume
#

Hello there:
I have a question regarding the HA app and cloudfare setup.
I am using HA with the cloudfare ad on and am not able to access HA outside of my network with the App
In the browser it works outside of my network.

jade wing
#

Hello there:

supple scarab
#

How to use Alexa compatible door bell in assistant

river wharfBOT
#

@supple scarab Please do not cross post. Read the channel description, post it and wait for folks to respond. Crossposting wastes people's time as they're unaware of the help you're getting elsewhere.

If you don't get any responses after an hour or more, and your message is no longer on screen, it is fine to re-post or post a link to it.

edgy dew
#

Hi everyone, I've managed to slightly mess up the http block in my configuration.yaml to where I can see the front end but I get a 401 when trying to access addons through the UI. Any ideas on how I can fix this? I'm running homeassistant OS on a raspberry pi 4.

jade wing
#

What do you mean "mess up"?

#

Either the UI works or it doesn't, I don't know any way you could only break add-on access

edgy dew
#

okay so it seems like it was unrelated to my config change - cleared cookies and the addon UI doesn't give me a 401 anymore

quartz steppe
#

First time HA user here. I've completed a fresh install of HAOS on a Lenovo PC and i can connect to the UI. However the Add-On store is empty. I have found a few posts which include try restarting, rebooting, just waiting (its been around 12 hours since install completed). It does have internet access.

Is there anything I need to configure to get the add-on store to populate? Thanks

quartz steppe
dreamy cloud
#

If you switch a zigbee dongle, from sonoff-P to sonoff-E, do you have to re-pair all the devices or you can just set the new configuration for the new stick, on zigbee2mqtt?

jade wing
#

But their FAQ also answers it

dreamy cloud
#

Thanks

remote osprey
#

@fallow kestrel FYI, I had previously disabled support for older arches, I fixed it. So if you feel like checking for updates and want to try and install, should be fixed. It should be building it for you on all older devices now.

severe rock
#

Hello. I am playing with the ADB add-on and have it working with two firesticks... I assumed I would be able to use it with tablets and phones too, but have not been successful at connecting post set-up.

#

unsure how to troubleshoot

elder schooner
#

Which ADB add-on?

severe rock
#

damn I am in the wrong channel arent I

#

sorry

elder schooner
#

Yeah, that's an integration

severe rock
#

I see there is an ADB Addon that advocates use of the native python implementation ... any idea how all that works out?

supple grove
severe rock
#

how you ADB over TCP through HA using "built-in Python implementation"

#

well at least I am on the right track there...

#

thanks

elder schooner
severe rock
#

I thought perhaps there was a way to ADB that I was not already looking at and it referenced. THere were no links and thought you may know better. Thanks

fallow kestrel
remote osprey
fallow kestrel
#

np, debuging in on a opensource platform like homeassistant is everyones responsibility.

quasi oasis
#

Hi, I'd like to create an addon to run a gitlab runner as addon. Is it possible to mount /var/run/docker.sock into a addon container?

elder schooner
quasi oasis
keen pebble
#

@lime girder I'm looking to use AMR2MQTT and had 1 question after reading the documentation. Can the rtl-sdr-dongle be attached to the Pi running HA or do you need it on its own separate device? I have a Raspberry Pi 4 Model B running HA if that matters.

remote osprey
#

if its the add-on, then yes should attatch to same device, definitely the case for rtl_433, and pretty positive for AMR2MQTT

keen pebble
nova anvil
#

Hello everyone, my MotionEye is not connecting to cameras after last update, message: "Unable to open video device". Does anyone relate?

Logger: motioneye_client.client
Source: components/motioneye/init.py:312
First occurred: 3:40:10 AM (3 occurrences)
Last logged: 3:40:39 AM

Connection failed to motionEye: Cannot connect to host 127.0.0.1:28765 ssl:default [Connect call failed ('127.0.0.1', 28765)]

#

It was working before update

pseudo turtle
#

Advanced SSH & Web Terminal not starting

native otter
#

Guys , got a question. Currently running zigbee2mqtt as a add-on in Home Assistant. Could I migrate zigbee2mqtt to a docker enviroment ?
I'm currently running home assistant as a VM in Proxmox.... Might want to go full docker in the future....

brittle night
native otter
# brittle night Yes

How will those entities be available to homale assistant running on a isolated VM environment?

Tried finding some info in the www about this but couldn't find anything about it

viscid orchid
#

Through MQTT

#

doesn't matter where Z2M runs

#

Presumably you could make a backup of the addon and extract the config directory from that, or use the backup functionality in Z2M

still wren
#

Hey guys, I want to migrate my remote access from using duckdns to cloudflare so I dont have to port forward (for security reasons). Bare with me here, but will the duckdns url I already have work as a domain for cloudflare? Or would I need to purchase a new domain? Thx!

still wren
#

Anyone?

brittle night
#

just buy a domain man

still wren
#

Sure, not really answering my question though

modern lion
#

Hey I need help. I use Cloudflared to access HA externally but recently I get this error 1033 when I try to connect. This is the cloudflared log:

[20:05:14] INFO: Checking add-on config...
[20:05:14] INFO: Checking for existing certificate...
[20:05:14] INFO: Existing certificate found
[20:05:14] INFO: Checking for existing tunnel...
[20:05:14] NOTICE: No tunnel file found
[20:05:14] INFO: Creating new tunnel...
failed to create tunnel: Create Tunnel API call failed: tunnel with name already exists
[20:05:14] FATAL: Failed to create tunnel.
Please check the Cloudflare Zero Trust Dashboard for an existing tunnel with the name homeassistant and delete it:
Visit https://one.dash.cloudflare.com, then click on Access / Tunnels
s6-rc: warning: unable to start service init-cloudflared-config: command exited 1
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.
/run/s6/basedir/scripts/rc.init: fatal: stopping the container.

elder schooner
#

Do what it says. Delete the existing tunnel in Cloudflare, so a new one can be created. Or provide that tunnel's details to the add-on

modern lion
austere ravine
#

hey all, slightly weird one

yesterday I upgraded from a Pi4 to a Pi5, restoring my HA backup. I installed HAOS using the process in the docs - using the Raspberry Pi OS installer to flash an SDcard with the HA image. Everything works great!

...except for the Terminal/SSH add-ons. Both the official one and the "advanced ssh & web terminal" one refuse to start, logging only the error exec /init: exec format error. If I'm reading the search correctly, this usually indicates an arch mismatch, like you've put the x86 or x64 docker container onto the ARM Pi. Except I just clicked "install" in HA's addon store, so I'm not sure how it could be wrong. All my other add-ons seem to be working fine.

anyone seen this before? is it a KI in the latest release?

#

I've tried uninstalling and reinstalling both addons a few times, with no luck. Without those add-ons I can't get console access to try more debugging

void imp
#

Is there a way to backup addons with HA OS? I need to migrate to a larger SD card and have the "Full backup", but I know that this doesn't contain backups of addons_config as a past backup of an addon (that I deleted due to being out of storage space) was larger than the current Full Backup size

supple grove
#

Full backups should include this.

quick trench
#

they do, unless it's custom then your miliage may vary

void imp
#

Hmm, perhaps something changed with the config for the addon I was testing then

#

Anyway to trigger an addon backup just incase?

quick trench
#

do a partial backup

void imp
#

So you do. That wasn't clear so I didn't even think of checking partial backup. Thanks for the help!

heavy arch
#

Unifi Protect add on is broken with the latest Protect beta. Just FYI for anyone thinking about upgrading.

brittle night
#

in the docs it warns you not to update to betas

heavy arch
celest pewter
#

Hey there, I'm experiencing cyclic CPU usage spikes and high disk read rates from the MariaDB add-on recently. Anyone has an idea what could be the root cause?

supple grove
#

Well, what you use your database for? How did you check that?

atomic summit
#

im having some trouble with ngnx port forwarding. online port checkers say my port is closed when my router says it open and someone in general told me it could be that my ngnx is configured wrong

#

i blurred out my personal domain

#

but does anyone see something wrong

quick trench
#

looks good

#

what about duckdns

atomic summit
#

Anything wrong or should i just reboot my wifi

quick trench
#

looks fine, what are the optional configuration at the bottom?

jade isle
#

(also make sure Nginx addon is started)

atomic summit
#

this?

tired ember
#

I'm having an interesting issue with a newly installed HaOS VM (running on Proxmox, using HAOS 12.0) that I then restored a recent backup to. The addons appear to be running (can see log messages) but they show as not running and clicking "start" causes a supervisor log message that says "XXXXXX addon is already running". I tried to reinstall an addon but the UI reported that there was an error and to check supervisor logs. However, I didn't see any error messages in the supervisor logs.

jade isle
#

what is that toggle say

atomic summit
#

"show disabled ports"

atomic summit
jade isle
#

reset to defaults, hit that toggle, show me again

#

confirm the nginx addon is running, then from your machine, do 'telnet <HA IP> 443'

atomic summit
jade isle
#

no setting for the nginx webui

#

that's a bit strange

#

what happens if you visit <HA IP>:81

atomic summit
#

page not accesible

jade isle
#

Again, is the addon running?

atomic summit
#

yes it is

jade isle
#

Ok, if it is running, then doing 'telnet <HA IP> 443' should be relevant

atomic summit
#

?

#

do i have the wrong one lol

jade isle
#

Could be, yes

atomic summit
#

i have the official one

#

the one you show is a community addon

#

but ill try that one

jade isle
#

Don't remove the official one

#

just stop it

atomic summit
#

started that one

#

stopped the other one

jade isle
#

Ok, can you confirm the ports, and then the telnet command result?

atomic summit
#

about the telnet

#

should i do that on my pc

jade isle
#

Yes

atomic summit
#

cuz that runs windows

#

and it doesnt recognise that as a command

#

in the cmd

jade isle
#

Enable the telnet client from there

#

If the telnet (port query) is successful, the result should be a blinking cursor

#

That would confirm nginx is listening at that IP and on that port.

atomic summit
#

i do just have blinking cursor now

#

nothing else

jade isle
#

perfect

#

that confirms nginx is running

#

can you visit the HAIP:81

atomic summit
#

nginx login page

jade isle
#

so far so good.

#

Now stop the un-official addon, start the official one.

#

Run the same telnet command.

atomic summit
#

blinking cursor

jade isle
#

perfect

#

so both are working

#

Going back to your router

atomic summit
#

HAIP:81 does nothing now

jade isle
#

That's expected

atomic summit
#

okay

#

good

jade isle
#

the official addon does not have a webui

#

What router is it

atomic summit
#

proximus bbox3

jade isle
#

give me a moment

#

ugh, dutch specific 🙂

#

Ok, as far as you're aware, is there an active firewall running on the router box?

atomic summit
#

yes

atomic summit
#

belgium

jade isle
#

So duckdns is running, nginx is running. The port forward is configured.

atomic summit
#

yes

jade isle
#

Can we verify duckdns correctly updates your domain IP

atomic summit
#

idk can we? lol

jade isle
atomic summit
#

Server: UnKnown
Address: numbers igues

Non-authoritative answer:
Name: mydomainduckdns.org
Address: IP

jade isle
#

replace <mydomain> with your domain name 🙂

atomic summit
#

yeah i did

#

just i dont want my domain public here

jade isle
#

No need to paste it

atomic summit
#

hmm it isnt

#

but i have to go now

#

im back in an hour and a half or so if youll still have me then

jade isle
#

Your ISP may employ CGNAT

#

preventing duckdns from updating

atomic summit
#

is that fixable

jade isle
#

If I'm still around, sure.

#

Maybe.

#

Depends on the ISP

vestal stratus
#

Hello!

I have a home server with a number of applications such as HomeAssistant. These are accessed individually via different ports.
Now I want to reach my home server with a name instead of the local IP address. I have already installed nginx proxy manager and adguard (as AdBlock service), but after configuring nginx it still does not work. The page was not found it tells me. What should I do now?

Regards,

PolizeiDreamy

jade isle
#

You want to reach the HA instance by FQDN, ok?

#

(fully qualified domain name)

vestal stratus
jade isle
#

You mean to say from external, or internal in the LAN?

vestal stratus
#

internal

jade isle
#

Then nginx doesn't come into play.

vestal stratus
#

How do I do that then?

jade isle
#

You need to configure your router / dhcp server to issue and manage a local domain suffix

vestal stratus
#

on the dhcp is not with the ports

jade isle
#

You're mixing / confusing things.

#

If all you want is to be able to say point your browser to homeassistant.lan:8123 in your browser

#

instead of 192.x.x.x:8123

#

You need to configure your router / dhcp provider

#

with that domain suffix

vestal stratus
jade isle
#

Here's how to do it on an Asus router:

vestal stratus
#

i have the fritzbox

jade isle
#

I'm not familiar with FritzOS capabilities and / or settings

#

But you should dig around in the interface

vestal stratus
#

can I do it with Addon Adguard?

jade isle
#

I don't think so.

#

That capability is linked to the DHCP server

#

which in your case (I'm asuming) is the FritzBox

#

Nothing to do with Nginx, AdGuard or HA.

vestal stratus
#

I have set it so that the router (fritzbox) sends the DNS requests to Adguard

jade isle
#

See if this helps you

#

Apparently the local default setting is fritz.box

#

If you have reserved the HA box IP in the Fritz

#

then you already should be able to type <whateveryourHAisnamed>.fritz.box

vestal stratus
jade isle
#

replace HA with whatever name you used

#

(in the DHCP reservation)

vestal stratus
jade isle
#

Obviously - you need to replace HA with the name you used in the DHCP reservation screen in the FritzBox, for your HA box mac address

vestal stratus
#

is work

#

thank you

jade isle
#

Alles gut/

atomic summit
jade isle
#

Hey

#

Does your router report the WAN IP?

#

(don't share it, just tell me if it does)

atomic summit
#

i dont know

#

i cant find it

#

it does have a section "ethernet WAN connection"

jade isle
#

Look for a status page

atomic summit
#

didnt find it but i found somthing else intresting

#

an integrated dynamic dns provider

jade isle
#

if that works reliably, then you don't need duckdns

atomic summit
#

found the "WAN MAC address"

jade isle
#

nvm

atomic summit
#

how would i then integrate it withhomeassistant is the question

#

it does have a few providers possible

jade isle
#

Well then no, that's just something that helps you configure DynDNS if you already have a provider from that list

#

which you don't

atomic summit
atomic summit
jade isle
#

Are you sure the duckdns token has been correctly pasted in?

#

I would doublecheck that

#

then restart the duckdns addon

atomic summit
#

Wouldn't it show in the logs if it was wrong

#

I had that problem before

jade isle
#

right - what do the duckdns addon log say

atomic summit
#

Nochange
[Timestamp] info ok
Wrong ip

#

Over and over again

#

With wrong ip i mean it does give an ip just thz wrong one

jade isle
#

restart it

#

check the log again

#

Can you refresh your WAN IP

#

(usually disconnect / connect the pppoe or whatever connection you have)

#

or in simple terms, shut down your router for 2 mins.

atomic summit
#

i would rather not shutdown my router

jade isle
atomic summit
#

as my family is using the wifi

jade isle
#

Well, the path you're on now, is to establish whether your ISP is using CGNAT

#

And whether you can potentially get around that, by trying to refresh your WAN IP

#

As internally, stuff is working.

atomic summit
#

ok if i understand correctly cgnat stops dynamic dns servers

#

but

#

if it has a help thing for dynamic dns providers

#

i would assume it wouldnt right?

jade isle
#

simple terms, duckdns and CGNAT do not mix.

atomic summit
#

ah just specifically duckdns

jade isle
#

That's the router default interface

#

doesn't mean the ISP supports that

#

not specifically duckdns

#

any dynamic dns

atomic summit
#

ah

#

ok

jade isle
#

that is not provided by your ISP

atomic summit
#

yeah but i really cant restart the wifi at the moment

jade isle
#

duckdns has an agent polling the internet, telling a DNS server somewhere that mydomain.duckdns.org is on this ISP, with this IP address.

#

and updating that DNS entry quickly

atomic summit
#

could i use another dynamic dns provider instead?

jade isle
#

You could try, but if CGNAT is employed, it would not help you.

atomic summit
#

yeah but a dynamic dns provider that is supported by my isp

jade isle
#

provided by, not supported

atomic summit
#

yeah

#

that

jade isle
#

That is very rare

#

And in your country, highly unlikely.

atomic summit
#

fair enough

jade isle
#

🙂

atomic summit
#

i do not know the diffrence

#

but my family is also using the internet i assume lol

jade isle
#

Wifi will still work, but you would not be connected to the internet.

#

Well, then netflix is more mission critical than you figuring out the issue. So up to you 🙂

atomic summit
#

so you are sitll connected to the modem

#

no my parents are doing actual important things

#

and will probably kill me if i kill the wifi at this momet

jade isle
#

Fair enough.

atomic summit
#

i just realised

#

the only thing i find of the wan

#

is the WAN MAC address

#

wich is not the WAN IP address is it

#

the dyndns thing

#

has an option "custom"

#

would that be possible or something?

#

my isp supports/provides no-ip

#

wich has a homeassistant integration

atomic summit
#

i have researched a lot more

#

the duckdns addon just doesnt detect the right ip

#

but the one it does detect is not a "non routable ip"

#

so according to my research it is probably not a cgnat problem

jade isle
#

All signs point to that

#

I can't be sure, of course.

jade isle
#

And update your domain with the public IP through which you exit

#

If it's unable to do that, it more often than not means one thing - CGNAT

atomic summit
#

Ugh

#

Imma try again tomorrow

jade isle
#

If CGNAT is in play, your other solution would be your own domain (paid for) and cloudflare tunnels

#

or a better ISP

quick trench
#

you probably need to purchase a static IP

#

or an addressable IP, most ISPs that do CGNAT also offer an IP that is available to get around CGNAT specifically for servers.

#

a cloudflare tunnel will get around that, or nabucasa, or a vlan

honest bloom
#

ngrok can also do this

hybrid elm
#

I just made an add-on for a LCDproc client that pulls stats from Home Assistant to display on a remote LCDd server. Early release version but seems to work great for me. Feedback appreciated, and hopefully can be added to the Add-on store soon. https://github.com/rohbags/ha-lcdproc-client/

brittle night
#

also have a very bad taste in my mouth after waveshare pi TFT junk

hybrid elm
brittle night
#

i'll pass it along to others, definitely not something for me personally tho

#

but as far as your hope to get added to add-on store.. i dont believe that will ever happen

#

you just gotta post on reddit forums w/e and hope it gets traction to point to your github repo and have people manually add it

hybrid elm
weary bough
#

Hi all, if I could ask a question please. I migrated (via backup/restore) from a Pi to an x86 Mini PC. I've just noticed that Node-Red isn't connecting to the new broker address. error "[mqtt-broker:your Broker] Connection failed to broker: mqtt://192.168.1.248:1883" I can't seem to see anywhere to change the IP to the new one. Node-Red seems to running running fine, MQTT explorer can connect (on new IP), but I'm not getting updates since migration. Do I have to remove and re-install Node-Red?

supple grove
weary bough
#

Sorry, scanned down and didn't spot that, thought Add-ons would be best, I'll post there. Thanks,

uncut lava
#

Hello, im trying to add dimmers for my led strips using Limitlessled config. Ive got Miboxer gateway. Newly created switches in HA dont work and firstly i want to rule out that HA is able to communicate with gateway, but i dont know how.
Can someone please point me in right direction with my problem? Im still learning about HA.

jade wing
river wharfBOT
#

#integrations-archived integrate Home Assistant with devices or services, or provide functionality within Home Assistant.

#add-ons-archived provide additional software or services, which an integration could possibility integrate with. Add-ons are for Home Assistant OS and Supervised only, other install methods can install software other ways.

atomic iris
#

Is it safe to update nginx now?

#

After the breaking change warning?

#

Update NGINX Home Assistant SSL proxy
3.8.0
Update Alpine Linux to 3.19
You have 3.7.0 installed. Click update to update to version 3.8.0

#

I remember the previous version that showed up had breaking changes warning so I left it because I dont ave time for the admin

#

Will this stil be the case?

jade wing
#

Yes

#

Breaking changes don't go away

uncut lava
# river wharf

Oh, okay, I tried to add Limitlessled as addon and it redirected me to yaml config. Thank you.

jade wing
#

That's not an add-on

glossy cairn
#

I have an issue with my AdGuard Home. Sometimes it just becomes unavailable for 5 minutes, with the logs saying "network unreachable". All devices connected to it then can also, inherently, no longer access the internet. After ~5 minutes it suddenly starts working again.
This started happening quite suddenly, no issues in the first 6 months of use. I did add a laptop/server to it shortly before it began happening, but no idea what the relation could be. That server is no longer using the DNS and the issue persists.

next fractal
#

Studio Code Server always Always takes up 18% of memory. Is this a problem?

jade wing
#

18% of how much though?

#

It is a well known and well documented RAM hog

next fractal
jade wing
#

Then that's entirely normal

next fractal
#

Oh, thanks

slender oriole
#

Just recently updated and now the Advanced Terminal and SSH add-on isn't letting me connect over SSH sudo: unable to allocate pty: Read-only file system

#

The web version of the terminal works, but not through SSH. Anyone seen this?

supple grove
#

I'd check the host and addon logs.

elder oracle
#

Having issues starting the Zigbee2Mqtt addon using the mosquito MQTT broker,

# 
[11:38:59] INFO: Socat not enabled
[11:38:59] INFO: Starting Zigbee2MQTT...
Zigbee2MQTT:info  2024-03-07 11:39:00: Logging to console and directory: '/config/zigbee2mqtt/log/2024-03-07.11-39-00' filename: log.txt
Zigbee2MQTT:info  2024-03-07 11:39:00: Starting Zigbee2MQTT version 1.36.0 (commit #unknown)
Zigbee2MQTT:info  2024-03-07 11:39:00: Starting zigbee-herdsman (0.35.1)
Zigbee2MQTT:error 2024-03-07 11:39:31: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2024-03-07 11:39:31: Failed to start zigbee
Zigbee2MQTT:error 2024-03-07 11:39:31: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
Zigbee2MQTT:error 2024-03-07 11:39:31: Exiting...
Zigbee2MQTT:error 2024-03-07 11:39:31: Error: Failure to connect
    at Ezsp.connect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:373:19)
    at Driver.startup (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/driver.ts:163:13)
    at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
    at Zigbee.start (/app/lib/zigbee.ts:62:27)
    at Controller.start (/app/lib/controller.ts:109:27)
    at start (/app/index.js:107:5)```
supple grove
#

Which coordinator do you have?

jade wing
#

The #zigbee-archived channel can best help, but make sure that you've not flashed the multi-protocol firmware, and that you don't have either the multi-protocol add-on or ZHA (may show as Sonoff...) integration enabled

past oar
elder oracle
supple grove
#

The P variant or the "normal" one? Because if you have any of those then you have the wrong driver. ezsp is for the E model.

gaunt schooner
#

i have my esphome addon set to auto update but its never updating. has anyone else experienced this? i think all my other auto updating addons work fine.

gleaming agate
#

Hi, quick question, will wireguard still work as expected with the latest version of haos/ha? thanks

elder schooner
#

HA itself does not interfere with add-ons. HAOS or supervisor updates may - have not tested WireGuard with HAOS 12 myself.

cinder sparrow
#

Anyone else using the cloudflared add-on? My instance is no longer accessible

#

I think some braking change happened... but not sure

quick trench
#

no breaking changes happened

#

look at your setup & your network

cinder sparrow
#

error error="failed to accept QUIC stream: timeout: no recent network activity" connIndex=1 event=0

quick trench
#

Sorry, you'll have to wait for someone else. I can't help.

cinder sparrow
#

I powered down all the electricity, now back online and it does not work anymore

#

No problem. I'll try restarting my isp modem maybe that will help not sure

quick trench
#

There's most likely a restart order to things

#

modem + network

#

then start HA

#

and if you have adguard, it'll complicate situations even more

cinder sparrow
#

Restarting my router fixed the issue lol

quick trench
#

sounds about right

#

for what it's worth, the cost of nabucasa is really worth it for these edge cases like this. Otherwise you have to build ALOT to overcome power outages.

#

Just my 2c

twin token
#

i need to find a way how i can access my nextcloud addon folder (config/config.php)

#

i have the home assistant os

quick trench
#

it's most likely not accessable unless the person who made the addon added the data to the addons folder

#

if you install samba share, and access the shared network folder (from another computer), you may be able to see the data

twin token
#

mhh i want to have accsess via wireguard and need to add the trusted ip, home assistant is working very well ;D

#

okey i can try it ;D

#

thx

twin token
elder schooner
#

Some add-ons save their configuration in /share

quick trench
#

TIL

twin token
#

til?

supple grove
#

Where did you get the addon from?

twin token
#

HA Add-ons by alexbelgium

supple grove
#

Apparently the config is in /data/config/www/nextcloud/config/config.php.
You can check if/where that's mounted similar to this with the advanced SSH addon and disabled protection mode:

twin token
#

find / -name config.php loading... nothing happens. is this the indicator for having no access?

supple grove
#

No. Maybe your storage/hardware is slow or you have a lot of stuff.

twin token
#

no, it finishes and then i can write the next line. There is no output

supple grove
#

Oh. Then yeah, it could not be found. Kind of funny, you reused my words but I interpreted them wrong. I write it off to hopping between multiple server/chats/channels every few seconds.

quick trench
twin token
#

i saw on google ;D thx

#

in portainer i see the different Volumes but i cant find them i the volumes i see in homeassistant

#

and how i can use the Advanced SSH & Web Terminal when i have the os version? i have no username or passwort

elder schooner
#

You define your own

supple grove
quick trench
#

he probably already has it, and won't be able to update when he gets the next update

mortal blaze
#

Is the vaultwarden add-on local and is it safe to run it on HA Blue (0droid N2+) remotely accessed only via Tailscale (so HTTP only)?

elder schooner
#

It will not let you login via a http connection

fierce osprey
#

what should the HA URL be in the VSCode addon config?

# 
The Host URL of your Home Assistant Host```
#

local? 192.xxxx?

#

i'm not getting entity completion so i added a long lived access token, but don't know what to put for the
"Host URL"

elder schooner
#

What? There is no URL needed for the Studio Code addon

fierce osprey
#

wait, so i should keep all the extension settings blank?

elder schooner
#

What are you talking about?

fierce osprey
#

HAOS -> VSCcode Add-on -> Extensions ->
keesschollaart.vscode-home-assistant settings

elder schooner
#

Those are the available options for the Studio Code addon

vsc.png
fierce osprey
#

right. i'm talking about when youre IN the browser IDE looking at the VS Code extension settings

#

the main problem is that when i'm editing YAML, i'm not getting any entity completion suggestions

elder schooner
#

Haven't ever put anything in there

fierce osprey
#

am i not getting entity id completion due to another issue then?

#

maybe it's because it's not https?

elder schooner
#

Isn't working with http and https 🤔

fierce osprey
#

let me check https

#

nope

#

http/https zero entity id completion in configuration.yaml

# 
[16:05:38] ptyHost was unable to resolve shell environment Error: Unable to resolve your shell environment in a reasonable time. Please review your shell configuration and restart.
#

not sure if that's related

#

HA command pallette commands work fine though, like Reload Automations

elder schooner
frank sable
#

Following this I was able to get EPL but im not sure how API works because I cant get the NFL to work

brittle night
frank sable
#

also need to figure out adding sensors too. but sure

mortal blaze
#

Is the vaultwarden add-on local and is it safe to run it on HA Blue (0droid N2+) remotely accessed via HTTPS?

elder schooner
#

Yes and it depends

#

With a weak password and without 2FA it is unsafe

river wharfBOT
#

@pine kayak I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
pine kayak
#

I can't figure out what is wrong with the addon....

#

the log just updates every minute or two saying it is starting the drivers for one of the three UPS
the integration won't see the addon at all either

#

ahh this loop i caught a log not show on each loop

river wharfBOT
#

@pine kayak I converted your message into a file since it's above 15 lines :+1:

📎 message.txt
pine kayak
#

it didn't use to do that, it just showed no data for that UPS

#

this means in a failure scenario one bad UPS can take the NUT service down for all other UPSs - nice

eternal notch
#

Studio code server isn’t auto completing any more for some reason, it used to show all entities when I type light. for example

I made sure it’s enabled in the settings, reset the settings and reinstalled the add on but still, any way to fix it?

elder schooner
#

Atwixtor had the same problem. Setting a long lived token doesn't seem to help. You should report it to GitHub

eternal notch
elder schooner
steel hollow
#

Hello,
I can't access samba add-on home assistant OS from zero tier one add-on.
is it possible ?

solar urchin
#

Has anyone here used the rtl_433 add-on?

#

I can't seem to get it to work consistently with my homeassistant setup. The devices show up, but there's no entities underneath them.

rich harbor
#

I get this in my AdGuard log. Any clues?
I am doing a full reboot just in case. Also rolled back to .03 version but same thing.
2024/03/12 22:51:27.490737 [error] dnsproxy: 172.30.32.3:53: response received over udp: "exchanging with 172.30.32.3:53 over udp: read udp 172.30.32.1:53754->172.30.32.3:53: i/o timeout"
2024/03/12 22:51:27.490871 [error] dnsproxy: upstream 172.30.32.3:53 failed to exchange ;18.178.168.192.in-addr.arpa. IN PTR in 2.024503393s: exchanging with 172.30.32.3:53 over udp: read udp 172.30.32.1:53754->172.30.32.3:53: i/o timeout

#

Meh reboot 'fixed' it. My least favourite of fixes. It's back

onyx zenith
#

hello
I have a Problem with rpc shutdown

#

i cant send a pic

elder schooner
#

You can copy & paste error messages from the logs

#

If it is longer than 15 lines, with a code sharing site

river wharfBOT
#

Please use a code share site to share code or logs, for example:

Please don't use Pastebin, since it can randomly add spaces to the main view. Please also don't share text as images since it makes it harder for people to help you. Remember that others may have colour blindness, impaired vision, etc.

steep wadi
#

I want to use my own local CA with the Let's Encrypt Addon but i get that error
Failed to resolve 'local-step-ca' ([Errno -5] Name has no usable address)"))

is there a way to bypass that error since i am not able to add tdl's to my device domain in fritzbox?

steep wadi
#

i mean the easiest workaround is to simply add the ip instead but i actually dont want to keep track of which server uses the ip and which the domain name

drowsy roost
#

hello there

#

im tring to use duckdns and when duckdns starts, current ip of dns is setting to my laptop's ip address not my raspberry pi

hard rune
#

Can add-on containers like Radarr, Prowlarr, etc be routed through the add-on instance of WireGuard or Tailscale? Or are these add-on versions only for external access to HA?

ocean kernel
#

is it possible to restream a nest camera stream coming into HA to frigate so frigate can process it for faces?

ocean kernel
hard rune
rich harbor
#

AdGuard add-on DNS completely flipping here locally. Are there any known issues with regard to that? It's so bad that when it starts i can't use internet
Seems ok currently. But was for 2 days and now it totally went apeshit again. The log is all timouts.
here's some snippets of it. https://dpaste.org/mDpOF
Any ideas?

thorn comet
#

I have been smashing my head against this issue for hours now. I have MPD. It finally can play a damn mp3 file out of the device. It can plan any MP3 I want! but if I try to play a playlist then everything goes to shit. MPD gets buried in "exception: CURL failed: The requested URL returned error: 401" and the HAOS log gets a bunch of "Login attempt or request with invalid authentication from 243ffc37-mpd.local.hass.io". I've tried every single thing I can think of here, from making the IP of the add-on a trusted network, to trying to give it its own user (mpd let's you specify a user, but NOT a password), to changing both the file path and music directory configs in a thousand different ways. I'm at my wits end with this nonsense. I'm just trying to play a playlist for christ's sake

golden tree
#

does anyone know if the influx add on includes chronograf as its front end?

supple grove
north horizon
#

Any one else have problems with AdGuard atm? I have really slow connection since few days. If i change DNS all works fine.

north horizon
violet fox
#

does any one know how to use nginx proxy manager

#

i want to do a proxy host and host a website from my another local device

#

?

quick trench
#

All the questions you've been asking over the past few days do not seem related to home assistant at all

#

this is not a general support forum

violet fox
#

Actually i am building a home project for which i am getting some doubts for building

jade wing
violet fox
#

I am using

#

Home assistant

violet fox
#

While creating the proxy host i am doing some mistake

jade wing
#

Well... nobody can read your mind

river wharfBOT
#

@violet fox Sadly we're not mind readers (any more anyway, not after the last time we tried). Please share the YAML and any errors so we can see what you've done.

red grotto
#

He's just letting you know. Not really asking anything. 😂

violet fox
#

actually i have a problem now, i.e i have a raspberry pi in my home and one VM in Hyderabad

#

both are connected with VPN

#

and ping is well established

#

but i am not able to map each of containers with subdomains with npn

jade wing
#

You're still making it impossible to help you by not actually telling us what you're doing or what the errors you're getting are

#

Maybe you'd have more luck on a more general computer forum?

violet fox
#

i have many containers in rasp pi

#

which i want to host using VM's static ip

#

from VM my pi is accessible but i am doing something wrong

jade wing
#

To quote Petro... dude

#

What have you done?

#

What errors are you getting?

#

Help us help you

viscid orchid
#

🦗

mortal elk
#

Coming from #general-archived. I am unable to access https from external url only http on external and internal url.

Using duckdns and nginx addons. I want to access my internal address when i am home and external when I am remote.

I have restarted nginx addon and home assitant but still could not get it to work

jade wing
#

Have you set set up SSL in the NGINX add-on?

#

Do you have your DuckDNS add-on creating certificates?

mortal elk
#

ssl is setup, this is my config from the nginx addon

domain: -----.duckdns.org
hsts: max-age=31536000; includeSubDomains
certfile: fullchain.pem
keyfile: privkey.pem
cloudflare: false
customize:
  active: true
  default: nginx_proxy_default*.conf
  servers: nginx_proxy/*.conf
#

Duckdns addon is creating the the certificates

obtuse epoch
#

What is better? To run Zigbee2MQTT and MQTT broker as an LXC seperate from my HA VM or install them as addons on my HA VM? (Proxmox Hypervisor)

supple grove
#

One benefit of separating Z2M from HAOS is that it can stay online if you upgrade the OS, for example. Whether you personally benefit from that I can't say. I run most of my services as docker containers in a dedicated VM for that.

tribal sorrel
# obtuse epoch What is better? To run Zigbee2MQTT and MQTT broker as an LXC seperate from my HA...

I prefer deploying each of my services in separate LXC containers, with each service backed up individually. This way, if there’s a mishap, I can restore that specific service without affecting the others.

By having Node-Red, MQTT, and Zigbee2MQTT in separate LXC containers, you can create automations thoughtfully within Node-Red to ensure that critical processes continue even if Home Assistant goes down.

north horizon