#the-water-cooler
1 messages · Page 747 of 1
i didn't fuss over that number too much. Mainly just warranty length
i think the system we picked has a 16?
Unless you go, all variable speed always on, it makes little sense on higher SEER Vs ROI. Even at 21 SEER ROI is years out. Makes little sense.
16 sounds a good happy medium.
yeah, the next step up added an "inverter" for more variable speed stuff. the jump in cost wasn't worth it and even the sales dude steered us away from it
I think 21 SEER variable ROI is like 12 years LMAO
My newest one apparently has seer of 5.2/10.1 heating/cooling
Fancy
Yep humidity control is great on those. I would jump on it if we had humidity.
can leave the setpoint about 5 degrees higher since it feels colder with lower RH
I've never lived somewhere without oppressive humidity
we already keep it pretty warm in the summers. the drop in humidity will be nice
that's probably the only reason the AC lasted as long as it did
set point of 78, it was idle more often than active during the summers
lol i think we were pushing 65-70 summer and like 40 winter
last reading before i cut power was 46%
@last dirge does not support nest or ecobee right?
negative, proprietary control
yep. I was looking at XC21
I've got a carrier VS19
Nice one
i think we're getting comfortmaster
we replaced everything
98% furnace, AC, zone controller and dampers
was like 13 grand
4ton
3ton AC, not sure about the furnace
original was 3.5 but we replaced the windows recently and that tipped the scales some apparently
the builder of my house for some reason decided "hey, let's use wooden double-hung windows
in 2007
they are horrible
nearly impossible to get them to seal
Sounds about right. Got a quote for 32 for 2 x 5 tons and 1 x 3 ton. for Lennox
Ryan Homes ™️ No corner left un-cut! ®️
next project
nice
provided I can get a quote under 50k 🙂
lol
plumbing parts are STUPID expensive
Key is if it will stay at 50
Insane prices
most all building materials are stupid right now
What did you draw that in? It lools SICK
Yep it's crazy.
if it has to go on a boat be ready to pay
@clear ferry my November electric costs were 287kr plus taxes fpr the whole month
Tyvm
the web based versions are ass
and the pro version is $300/yr
if you're a developer and you override common shortcut keys, you're an asshole
I did our new bathroom in Sketchup too. The carpenters really really appreciated that.
would it be odd to have nickel fixtures but brass hardware on the cabinet?
Nah.
all those lines D:
sketchup doesn't let you define constraints
so you end up with a million of those guide lines
3' 9 1/16"
the what now
I don't even know how to convert that because it's so confusing
But imperial is so much easier @orchid rose
We already settled this
Only idiots build houses in metric

sometimes I wonder if people are actually this dumb
Why wonder, you know that there's plenty of folks way dumber than that
you can spy them by their hats
That sounds like a illegal reference 🙂
It's mostly memes. But I do remember a guy here that tried to run his webcam on AC power
my political views may have clouded my judgement there. My bad
sometimes they make the hat from cloth and extend it and put eye holes in it
obvs
Despite his best efforts, a diligent chef makes a horrendous mistake as he prepares this classic but tricky dish. If you liked this watch this: https://www.youtube.com/watch?v=EcSoJDW_6-4
Visit our channel for more funny videos: http://www.youtube.com/bigredbuttonfilms
Subscribe to get notified when new comedy is posted: http://goo.gl/OksUzs
...
I'm too dumb to get it
Ah, thank you!
it's all greek to you
Baklava 🤤
I see what you did there Brian
Actually it should be Turkish
yeah, but there's no pun to go with Turkish

ich verstehe nur bahnhof
was eine mogelpackung
is that a crib @last dirge
it's a tub
ur a tub
lol
What’s that in proper units
It’s posted in freedom units ya commie
84°c, damn you must be burning alive
so dumb. be like those plebs || @tidal bronze || out in cali walking around in shorts putting up their xmas lights lol
Did you type that one handed ? Snow shovel in the other?
no it's going to be 65 tomorrow lol
It's been in the 30s and super excited about 4 to 5 days rain coming.
oh wow, got all your buckets and kiddie pools out on the lawn to collect some actual drinking water that dosen't come from a coconut?
Drinking is always coconut
So am I when it's that scorching hot
Here in Southern germany it's -9°C (15.8 F)... Last year it was nearly 15 - 20 degrees Celsius warmer this time around 🤔
We are having -12-16c next few days
it's suppose to be cold and snowy during xmas
Now it's -5 here. Pretty nice
Hi, I was wondering if someone could help me with this.
I tried setting up the hacs intergration, but I get this error message
There's no support for Home Assistant here - please look at the other channels for that. If you can't work out which is relevant, start in #general-archived.
If it's a question about the HA Amber see #yellow-archived, and #330990055533576204 for the Blue. Install related problems go to your Installation Method channel.
No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
If you found this server and want to know what it's about, start with the web site: https://www.home-assistant.io/
Remember when reporting spam to include a screenshot of the spam and the user's handle (eg @spammer#123)
Does anyone know how to fix this?
We might, but generally not in the #the-water-cooler channel. There's the support category fo channels for that
hai guys, we need a new catchy name for our first full ev
how about bZ4x?
wow perfect
Said noone ever
holy cow are all these unvaccinated people? https://youtu.be/xP1IY92-Ja0
T - S H I R T S - https://teespring.com/stores/trendy-tee-10
T W I T T E R - https://twitter.com/j_t_starwars
I N S T A G R A M - https://www.instagram.com/john_talks/
P A T R E O N - https://www.patreon.com/johnpomajr
T H A N K S F O R W A T C H I N G !
They still have higher vaccination percentage than you guys 
thats gotta be murica- Australia doesnt have that many people! lol
not after that parade lmao
Well, if there is infection and death in that parade the percentage of vaccinated just go up
Win win
I always thought Norwegians dealt with the pandemic by huddling closely together like in one big orgy. you just comfirmed that for me lol
Well yes, even with a bunch of protests we have gotten 90% vaccinated nationally
But a lot will be vaxed but want to just protest because they don’t like the government for whatever reason (eg because they support LGBT people, etc)
It’s turned very weird
8.9% here, but not surprising given how late our vaccine rollout was
We only started majorly vaccinating in August or so
Have some states here who are at 95%+ second dose
You have actually passed us in fully vaccinated though
Even though you were far behind
Yeah we vaxed incredibly quickly
GPs/ Pharmacists/ Mass Vaccination clinics, all available to vax people
They started using the military here now to assist in jabs
I still want to hear about vaccination by tranquilizer gun with that
just in time for omicron which is 80% less than all other variants before it to become dominate
The US probably already has it, they just don’t do genomic testing
it doesn't matter. it's the weakest variant of them all
Still current studies showing its only 1 fifth less virulent, still enough to harm health systems
Appears to be milder for vaccinated so far though, which is good
60% of the hospitalisations here now are unvaccinated
not really latest studies coming out of Africa shows 80% less hospitalizations
That was a latest study out of africa and the UK
Ah I see one is 80% and the other is 40-50%
Delta strain was the most potent of them all so 80 is freaking high
Australia managed it well. Max daily cases were 2000 with delta
I dunno isn't au like 75% cases to population
wtf who puts car washes in the tundra
No?
Not a bad registration number either, easily remembered
Yeah, it's a cunt number
The rich folks in Bærum use the ZZ plate numbers
It belongs to a very small fishing village up north
I thought those were outside mounted window blinds on the windows on the building in the background lol
They are
till they all blew off and scattered shit everywhere?
Nope, these days they are more robust
looks dumb
those don't look robust at all lol
I don't know how the wind hasn't blew that shit off by now
is that the answer to the sun not going down or something?
We don't have much wind inland, more of a coastal thing
Yes, 24h sunlight can be obnoxious
For once I agree with Sonoma
It's 30 years difference
the modren one's don't look as bad, but mounting stuff on the outside of the window like that is horriable
I would just put on those steel shutters
atleast then they serve more purpose than just blocking light
Inside on a electric roller with a Lux sensor so it can auto adjust through the day
So matter can have multiple masters, so home assistant and HomeKit and Alexa and google home can work together 🤢
Anyone can help me on #330944238910963714
@lavish gate Please DO NOT cross post. Read the channel description, post it and wait for folks to respond. Crossposting wastes people's time as they're unaware of the help you're getting elsewhere.
If you don't get any responses after an hour or more, and your message is no longer on screen, it is fine to re-post or post a link to it.
Well ok not the worst
Secondly, we tried to remove it, wasn't well received
Seems like people like to cause themselves pain 😛
it changed a lot since then
long live hassio
It's good to have so many Linux and docker experts in the community, it's a shame they can't even get passwd running properly
LOL.. long live hassio? That one doesn't exist anymore either 😛
Remember remember, hassio the pretender
When did the rename happen again
Has to be at least 2019
we demand you make supervised supported again! I have to run Ubuntu server with GUI on my raspberry pi 0, and I demand to be running addons
Ubuntu is not supported 😉
Shove supervised in a docker container and make it a docker compose install
Give it access to host docker, there is your cluster mess
Do you hate yourself?
yes
calling @clear ferry
Hey, it makes a good cheap HomeKit camera
inb4 🤢
Oh I’m sure. Atx just seems to hate anything that isn’t a rack Mount server that’s overkill
🤢
Rack mounted cameras?
nice
We don’t want old analog here
only terabyte ram cameras please
64k pi cameras
oh and the recording equipment with quadruple the ram
Atx would find a way
Needs 10Gbit connections
I just built the home assistant glow and stuck it in
Hmm, 2.6kw, how am I using so much
I'll go randomly turn things off
*turns off living room lights*
800W 😱
Turns out previous owners left incandescent bulbs, that's gonna knock a fair chunk off my power bill.
Surprised you didn’t know about the incandescent globes
they are GU10 spotlights
It’s pretty obvious
Pfft, @clear ferry is going to be like that’s nothing compared to what I use
Ah I guess GU10 it’s harder
I mean, I did know, I just didn't think it'd use /that/ much power
Prob 15KW
But yeah glad halogen & incandescent is banned in australia now (except for specialist globes)
Gonna be replacing all those for sure, ROI in like 1 month 😂
Well 40-50w per globe vs 3-10w per globe
Unless your GU10s are even brighter
yep, we estimated 50W per bulb given the 800W draw and 16 spotlights in that room, and that's just that one room, there are loads of them about.
At least GU10s can also have smart versions too if you wanted RGB for fun
literally responsible for like 30-50% of my power bill
Or easier brightness control
I thought about that, but given each room has like 16+ spotlights...
Yeah the cost adds up
been aiming rather strongly towards automating at the switch for that reason
Thank god my multicolored smart bulbs are like $15 in bulk
Probably smarter then, just unsure if any GU10 LEDs support dimming if you wanted that too
just have no idea what I'm doing, and I want dimmers and ideally zigbee, which I've not been able to find
#zigbee-archived or #hardware-archived might be able to help you with that
Long live tradfri ct bulbs
Join the upcoming matter / thread master race
CT?
Colour temperature
Ahh yeah
Sorry no, i don't have an Apple fetish
hmm not bad, £7/bulb
Controlled 24/7 via adaptive lighting
Im kinda hoping their smart shades are the right size for my window. They look decent
Updated every 3 minutes
did a quick count, 130 bulbs would be £910 for TRADFRI...can confirm, like the wall switch idea
Yep that’s a lot of light
would Zigbee even survive well with 130 devices
Not that surprising if it’s downlights in the roof
nice 🙂
Downlights, so 90s 🤢
Kitchen/living area alone 🙈
https://cdn.discordapp.com/attachments/536889452782419968/897112559717605386/IMG_20211011_142438.jpg
lol
Wtf
You could kill a vampire in there if you turned the lights on at 30%
Lol, I feel like that girl does 🙂
Put 1100 lum bulbs in every single one
The people who built the house must have had a light fetish
Every third
Yeah unsure on sizing but every third put a light would also work
Or every 4 th
There are 4..uh..hundred lights
lol
Prob should remodel
That lounge room could probably make do with 3-4 in a row and would be plenty of light
Take the rest out and patch up the plaster
I actually like it being nice and bright myself, but yea, definitely need to get rid of the halogen bulbs and replace with LED.
If you get brighter globes you could space them further apart. That many down lights just looks cluttered
Must be some kind of OCD or spectrum diagnosis by the builder
What is the gap between the lights?
Just to add to the funny, each row of bulbs is on a separate dimmer, even me, who likes having lots of light, finds that weird/confusing
Could help with the whole disco feel
room is 5.8 x 4.7m, and has a grid of 4x4 bulbs, so should be able to work out distance frmo that
Eh i can see the usefulness of that, since divisions make it easier to get the lighting you want
Like turn on one part of the room not all of it
But it’s an excessive number of lights to have…
but it's literally straight rows of lights in a rectangular room
Yeah I’ve seen usage in that. If you want just one part on (say if there’s a kitchen table) but don’t need the rest
Depends on the rooms usage though
suppose
But not even then, its just entire rows
Like in the apartment I’m moving into there’s a row of 2x4 down lights, far left pair will be for dining table, far right for looks, middle pair for Lounge room part. Great to be able to split it if we want
I would replace them all with multicolored bulbs for an income disco
I am so tempted to do this, it's cost like a months salary...but so tempted.
I would just move
Oh the lounge room lights I’m doing will all be RGB CCT. Gonna set up an automation to have them cycle through colours as a disco
Gonna be fun
lol
Call it piss off my housemates scene
You would move if there had been a raspberry pi in the neighbourhood though 


Whats crackin
Sanity
Attempt 2
You have to install the Flux capacitor plugin or it wont work
Remember to run rm -rf /
thats essential
@pallid willow There's no support for Home Assistant here - please look at the other channels for that. If you can't work out which is relevant, start in #general-archived.
If it's a question about the HA Amber see #yellow-archived, and #330990055533576204 for the Blue. Install related problems go to your Installation Method channel.
No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
If you found this server and want to know what it's about, start with the web site: https://www.home-assistant.io/
Remember when reporting spam to include a screenshot of the spam and the user's handle (eg @spammer#123)
Then why did you post the image 🤔
it's off topic for any of the other channels
hence why it's in #the-water-cooler
if i needed support i'd post it in the support channels
Hassbot got the period today
when you model something based on the manufacturer's specifications and it looks wonky
they only have pictures of that shade from that exact angle
they say 4" diameter but also say that the wall plate is 6", pretty sure they've got their measurements swapped
For when you want uncomfortably even lighting O.o
Maybe filming a multi-camera sitcom or soap opera
😂 I'm on a mission to get nice matching (at least per room) sets of LED bulbs now, done like 30 so far.
Also recorded this, guess I can at least be your reminder to switch away from halogen bulbs 😂
funny enough, we were wondering how the house was staying warm continually, even with windows open, I bet this is part of it
That is the only reason
I still have a few halogen bulbs and some edison bulbs around. I just like the light they produce
I like the flame like bulbs
leds are pretty good these days though
Those are collector items now
one reason I haven't swapped the halogen bulbs is because I haven't checked if the old smart dimmers even support leds. With no neutral wire they probably don't
at least not if you want it to be fully off
with LEDs you are lucky if old dimmers work at all
Naaaah
sudo su | rm -rf / | cat log.log
We’ll finally know what Covid tastes like: https://www.reuters.com/technology/lick-it-up-japan-professor-creates-tele-taste-tv-screen-2021-12-23/
yeaaaah that sounds like a definite winner. Shut up and take my money
although because it's Japan I can imagine there being alternative tastes it might sell with
Bulb flicker is great with old dimmer circuits
does this mean I can sell my halogen bulbs for $$$? 😄
nice, can you tell us what filament / how thick the wall is? That looks awesome
Filament is just inland white pla
These are other measurements. The video shows a 200mm long one
Driven by a d1 mini running WLED. As a test it was only powered via usb so maxed at 850mA but not many pixels there
nice, is this some generator or something? I have a 3d printer so interested to know about this stuff 🙂
@lone fjord is designing it. you can join us in wled discord if you'd like to watch progress or join in. he is using fusion360 to design it #818257911699734538
Also, I just finished replacing all the bulbs with LED in the living room (5x4 GU10 bulbs), dropped power from 754W to 72W 😂
nice
just tell me the parameters you need. i'll export you a stl file.
ill put this to thingiverse when i got my page and stuff done.
I'm not after one immediately (WLED is on my smart home todo list), was just interested in learning about how it was done, how the nice effect is achieved, etc. Apart from that since I'm not ready to start working on it, I can wait for the thingiverse release. Looks awesome though 😄
3d printing and WLED is a very nice combo 💪
What exactly is WLED
Open source software to help control LED strips to make cool effects and control them with HA
Oooooooh
software for microcontrollers like ESP
I have a spare LED strip, I wanted to smartify it
the software for esp that is making awesome effects like this
https://cdn.discordapp.com/attachments/791102918736478209/923652521409531924/IMG_0821.mov
yep, WLED seems to be "the way to go" for LED stuff, when I do LED stuff I will use WLED for sure
https://kno.wled.ge/
join wled discord too
I need to get my 3d printer fixed
Okay that’s an awesome link
3D printing and smart home in general is a nice combo lol, made garage door openers, home assistant glow, christmas tree stuff, etc etc 🙂
I need to get back into 3D printing. I got too busy and just haven’t had a chance recently
yup and then you realize how many hours you may be spending and then put it off even longer
congrats dude!!!!
Since I'm only working 50% in 2022 I should have enough time
Eyy congrats!!!!!! Healthy baby I hope?
Right now she has got a cold 
you have more free time in the beginning tahn later on lol
oh no!!!
Turn the heating up 
ugh i remember baby coughs 😦 they are the worse because you cant do much until they learn ho to cough properly
My boss was just happy that I took out all of December as vacation
Started the year with 66 vacation days
Only 18 transferred

Congratulations!!!
@shy comet how you been man? Been a long time
pretty good man how about you? yea its been a minute since I came into this channel 😛
Couldn't be better. Few days at home before the madness starts again 🙂
haha yea
How about that rain. Super stoked
yea its about time we got some rain lol but only for the day right?
Nopes 3 days and starts again next Wed. I was messing with Hyperion and TV lights and reminded me of you. Had some shield/plex resolution change issues. 🙂
hahah
Finally done with 2 TV's and hyperion. Some use of few days at home.
wow yea i cant even find the one i originally setup 😂
somewhere in the garage and big lack of motiviation to find it
lol. Was always using it with LEDFX server. So added hyperion to it.
nice!
Thinking of flashing all the downlights with wled and adding it to ledfx. lol
A broken clock is right twice per day 
Don't you have something to measure in metric?
Just what you need.. outside disco effects while you bask in the heat
All outside ones are already on LEDFX 😉
Nah you gotta shuffle.
What do you peeps host HA on then
you're gonna get in trouble talking about hass in our shitpost den
i run hassos in a vm on my server. some guys like hardmode with docker container and no supervisor
Im just askin casually
nuc is a pretty decent option
tempted to crack a R230 out
yellow if you want to wait a year to get it
This is why HA = hass is a bad idea since it has traditionally meant high availability
HA on my HA homie
Its all within context tho
Y'all and your hypervisors
Hypervisors are sexi
Name a better duo: atx and him talking about his certs
Atx and 🤢 anything
Hyperv is sexy
Hyperv is cool if you’re a weirdo who thinks ms is the only company that makes software
Hyperv is an abomination, thankfully it is less than 1% of my customer base, and any who did run it have since migrated
HyperV is decent if you just want to spin something fast up in windows because its already installed
i like hyperv because of its ha options
i just want my own license
i dont want the vmware enterprise + extreme max edition
Just for it to send heartbeats to other servers
Well vmware licensing can suck a dick
There is only two levels of licencing these days, is either enterprise plus or "fuck i don't know what I'm doing"
And before you say vmug is an option.. it’s missing vcenter isn’t it?

I also get Win Server 2022 Datacentre for free
No, VMUG has everything
Since when
Since forever
Yes
Which is the cool shit
I looked into esxi a couple years ago and vmug wasn’t everything

Or so I’ve heard
No comprende, anglais horriblé
we cant all be as sophisticated as you
ok now i feel like you're just making words up
sausage with bone and potatoes?
do you gnaw on the bone or treat it like a lollipop?
Nah, we salt it for a week or so, then dry it for 3-4 weeks
Sometimes 6-8 depending on size
what kind of animal was that
So lamb or mutton?
Lamb usually
I wanna it moose
Can agree, had it on finnair one flight
Was tasty
Kangaroo is also a nice lean meat to have too
you just answered it yourself, its not off topic
If its not off topic then its best to put it in the relevant topic channel
alr thanks!!
lmao
If we don’t use the dumb shit discord adds they might get rid of it

So be a part of the solution not a the problem
Stickers are great
Cats are accepted
Stickers are cool in the same way that your balls stuck to your leg is cool
For the first time in 3 years, i've setup a local dns server just because i dont want my HASS stuff to external route with my domain
sometimes its nice company
Custom stickers are also great
I expose hass.domain.com and just let hairpin nat do the rest. I use to proxy it with cloudflare but they got mad at me for using over 10TB bandwidth a month
lol
I would leave a tab open with my 9 cameras streaming lol
Apparently even cloudflare pays for bandwidth
Wood filament that I opened a year ago holding on for dear life
It's that time again
ledfx/prismatik?
Nah, just a dumb python script I wrote that I can enter a BPM into lol
Heh little friend
fella wants pasta
you just sit in your room and watch the lights change colors?
disco
me too
wanna be sad together
they are going to allow only 15k people in times square this year
gonna look almost as bad as it did last new years lol
I guess gotta do what you have to do to contain spread
cant be worse than this? https://www.youtube.com/watch?v=5Mex8lATy-M
It doesnt want pasta - it wants meat!
so youtube suggested some archery video after that
and at the end he's like: "Modern archers are hurt more often by the nock, than the pointy end". Because being an idiot and stumbling into supposed save ends is more common than arrows being used to shoot people
What's the pip one?
pip is python
however its a command in python whereas all the others are the software (dunno what the crab is tho)
crab is a mix of rustacean and the traefik hamster
pip is the python package manager. I don't get which style the logo is in
debian and ubuntu aren't exactly single pieces of software^^
ahh. right. npm logo is where pip got its style here
Would be more tech logos and swaps
Since gitlab/ GitHub wouldn’t be single pieces of software exactly either
javascript as well. Should be ECMAscript either way ^^
dead in the water https://youtu.be/fRs0OqV4uSc
🔥 GET 68% OFF ON BEST VPN ➨ https://bit.ly/3jBVCE3 🔥
♦
♦
ba dum tsss
Merry Xmas everyone and a Happy New Year
Let’s hope 2022 gets better than the last couple years
yeah - the global pause button - now we need the big man to press play! 😉
I bring gifts for the 🦝
I have seen this anime
what is the best way to support the development of HA... you know... with money
probably via Nabu Casa
there's no nabu casa on patreon
Support your local hooker
that's because it's a business
pay for home assistant cloud, support the community
pretend it's a $5/month patreon subscription
i'll just patreon frenck/franck . i see that name the most
anyways... big love to all!
You don’t have an insta and an onlyfans for your servers?
Might even create some for the right price
When you walk into his house that's what you hear, only fans
anybody have LED strips as primary lighting?
Gonna be a shit show thanks to covid
Ty Santa!
sorta
Always look on the bright side of life
BRIGHTER
I prefer the deep version
That's what she said
No she said I prefer Depp's
But like yeah, I think it will be shit
The more people want to stand up for their rights, the worst it seems to get for the majority
you'd rather people not have rights?
like the ability to say, no i dont want that in my body?
👋 I'm an imperialist
thats a dangerous road to go down
And I really don't see the world getting better until we can get covid under control
like you mean the media and political aspects?
I disagree
because thats whats affecting more then the virus it seems
No I mean the people dying bit
We're at an all time low of war
The annoying side effect
uh, you realize people need to die right?
world population growth NEEDS to stagnante
atleast given how we act as humans currently
The planet is estimated to hold 13 billion people at its max capacity iirc
What do you mean by that? Will people having more right make them act better?
i mean, this isnt a machine where you get to say, YOU ALL DO THIS, your sounding like a totalatarian dictator
I really doubt it can sustain that many, we have totally destroyed it with only 7
i think people acting better is their daily choice and it's theirs alone
Why are you so negative
If it were totally destroyed we wouldnt be here
no i think we should bump that back down to 5 billion
and keep it there till we can reach the next epoch of civilization
Others think we can just go to Mars!
i'd be fine with that
And destroy that too
legit, start sending like 250k people each year to marz
You are the most negative person i've ever emt
Mars is a toxic desolate desert, it cannot be destroyed
and now were onto earth
But put the wrong co ordinates and blast them into asteroids
Now you're killing people
no, let them go retake marz
space colony
start a litteral space station colony
outside earth
No, the asteroids will be killing them
We should really be doing space building grounds for rockets
Setting up mining on the moon
true, we dont have advanced enough protection to allow space travel for real
and using the moon to build space craft
Almost infinite cheese
like the issue is, how do you stop impacts from planet killing your ships
You avoid them
We can see potential collisions months before they happen
.....
We're not leaving the solar system
lets?
ffs, i dont wana stop at pluto
i mean i understand if we only make it out a bit, but fuck i hope were not just stoping at that point and not trying to go further
After the solar system it will either be manipulating wormholes with a fuck tonne of energy or colony craft exploring space for millions of years without coming across anything
fun
Which means you'll need a super intelligence to manage and monitor people
Humans wont make decisions
Just a bit sick of stuff tbh. Don't really want to go into details if you are ok with that.
You ever seen the series Travellers
no
Watch it
whats it on
netflix
What were we talking about before I made everyone depressed?
nothing
sweet fuck i hope the market crashes when i have enough downpayment for a house or land
It has started slowly in Sweden at least
I'm just here setting up a company
There appears to be hope
Oooh, doing what?!
Real Estate
which docker image to choose for running it on a synology docker?
:(
Im going to real estate you a blade of grass
😦
im fearful thats all i'd be able to get, because of stupid rich fucks buying up all the housing and shit
👀
I was thinking the same
Then a friend of a friend was selling, paid 10% less than value, no bidding
Got lucky
Literally going to buy a bunch of commercial and residential land
the benefit for me is my standard of living is much lower then most people
It only needs about 100k euro worth of stuff doing to it 🤣
i dont wana spend more then 150k for everything, eather a house on land, or land and then putting something on it
and i need taxes to be less then 3k a year for sure
yes
ive found some plots for like 15 acres for 30k
and then i could throw a used modular home on it for another 30k
Its all good having acres of land, but planning permission is a killer
In some parts of the US at least
and then put the utilities in for like 20k
so that puts me under 100k
which is doable
planning permission
ideally, ill be finding a small township that doesnt have a zoning board
id rather drive 30 min to get basic shit, then let gov be right up my ass telling me what they think i can do
im the master loophole finder
i mean, the house i want to build they wouldnt even know there was a house in there really
because i dont want it to be visable from the road
and i deff want a gate
with cameras
and assault drones....
And just like there your house budget is 0
15 acres, jeebus. My lot is, according to city records, "less than 0.25 acre" 🤣
yeah i want LAND
I'll build my own theme park! With blackjack, and hookers!
i mean, i want like 40- 100 acres
No you dont lol
because i want to give every one of my closest friends plots on my land
and start my own town
I do not lol. Mowing my lawn takes like 20 min, if that
What's a woods
and long grass when not maintained is very expensive
US boi
how is it expensive?
i know you were
but like it's not like im mowing 40 acres under trees in the back woods
Imagine mowing 100 acres every month
I have 1500m2
More than enough grass to cut
Imagine getting rid of the grass every month
Imagine not being allowed to cut the trees down because you need permission todo this
i have the normal lawn area, and i only mow that when i HAVE to
because it's gotten long enough where if i dont the mower would be overwhelmed
When you have alot of land you can be compelled to maintain it
Yeah, goats are sick
Livestock are also very expensive
not really if you dont give a fuck
here is a fenced in wooded area of 40 acres, go live like you would have normally
that is also not how it works
it's called free range sir
Free range requires more maintenance
Goatzzzzz
you think that
I know that
but my uncle doesnt do jack shit and still milks his cows when he brings them in
and he only randomly throws hay bales into the giant ass pen
What's an ass pen
He also makes sure they're healthy
donkey building
well yeah, but thats more just normal proper care, also he usually lets them bang all the time, so he always has more to replace them
sooooo
ya know
You have to also make sure their babies are healthy
and you dont think someone raised on a farm doing that, and then taking over said farm would be able to do so? like what do you think is sooooo expensive? ,granted if your starting from scratch yes, but upkeep is not bad
you are starting from scratch
and you said you want to let them do their own thing
soooooo
oh, my bad, just fyi, wire fences are next to nothing
they're alot when you have 100 acres
What even is this conversation anymore
also if i lost a cow, hopefully theres another pregger one so i dont have to worry
i have no idea
You shouldnt lose a cow
this person impressing upon me that he knows how i'd like to own my home
if it wants to be free, who am i to stop it if it figures out the way?
...
lol, liability, LOL
well you see you get some animal government people come round
And they be like
cow bad
no have cow
we take cow
our cow now
then i get another?
How now brown cow
and then guard that cow with guns
Please get a turkey if you get animals
and claim he is food but in reality he isnt
TURKEYS ARE EVIL
And tasty
turkeys no
yes, they do that
they chase you
when your 11
and you just wanted to pet it
and it doesnt stop
All the turkeys
till you go inside
get only turkeys and geese
na im good
Great turkey name
Kinky
cows are mean
they are not?
your just trolling at this point i feel like
alpaca wool is actually really expensive
cause cows are so nice
you should sell it
the key thing is
if you have any animal
make sure you have something that could kill it
just in case
I want a pet chicken
they are not
lies
if you bug them all the time like my brother, ofcourse they arent
Llamas are monsters compared to alpacas
wait, i might be thinking llamas
yeah
They listen to Norwegian death metal and hide knives in their fur
they are angry at being a llama
Lamas reminds me of this: https://www.youtube.com/watch?v=Vryan475_w4
Hallo Leute,
schaut doch mal beim Originalem Deutschen Übersetzer vorbei, der dieses Video vom Englischen ins Deutsche übersetzt hat. Er hat sich lange Zeit aus YouTube entfernt, doch er ist wieder aktiv.
Auf seinem Kanal https://www.youtube.com/channel/UC7Y62nqbqY-ep9FKC8dbRtA
findet ihr unter anderem noch weitere Versionen von Lamas mit Hüt...
A handy guide
Side question, anyone got a pfsense system?
xDD


