#the-water-cooler
1 messages · Page 34 of 1
my gas meter collects data in 15 minute intervals and then once a day it broadcasts it to my power meter and then the power meter zigbee meshes it away
might be better to look to an api from the company
I tried to find one. They have an internal API I can scrape. I had the same thought, once I realized it's daily
Lol, I dare you to trace this wire!
This is why my nerds nest are rainbows, at least then I know it's the red/blue/purple cable I'm following 😛
Fancy gas meter being smart. One at my parents isn't 
Yup, each tagged VLAN gets a color here (and trunks are purple) 🙂 Makes it less insane
Seriously. It has no right to go as hard as it does
Anyone running proxmox on Intel nuc 10,11,12 with multiple coral USB pass through?
TPU shuffling every time you reboot? 🥳
Not there yet. Run esxi and pass through never worked so running bare metal. Thought of giving proxmox a try.
its Austrian, whole world knows we are the best at hypervisors
Yikes proxmox does not support synology active backup 😬 should've checked that to boot. Lol.
That was short lived.
it comes with its own backup solution
lets you save those sweet qcow2 on your synology via smb or nfs
Yep was reading NFS data mounts. I handle all snapshots via synology across all esxi host. Thought it would be pnp. Guess not.
They all look like twins
they get that all of the time
rtl_433 is pretty neat. it's able to see what dipswitches are set on peoples remote. https://share.busheezy.dev/i/BQ7cmm
Rtl=fun stuff!
You don’t get it?
It’s all the pic of that officer in the news the past few days
I don't get american news, so no
Fuckin funny
Its not been in the news lol
The one who banged the whole squad
Not newsworthy over here
But lmao that sounds funny
Nothing wrong with banging the entire squad, but don't do it in work hours
its been a great team building event
So if there's a leak your gas company may know in two days?
They'd probably notice upstream earlier, but still
Doesn't sound like it would be a problem by that time...
Or at least be someone elses problem
cool concept
I think I've actually aquired a tennis elbow by playing too much GoW Ragnarök
The meter is not what would detect the leak in that regard.
Gotta say, the KodeCloud courses on kubernetes are really really good
Just the hands on labs are well worth it
Hmm, need to clean my upstairs desk soon so I can start doing certifications again
Free?
For me, yes
lol
Ability to send messages test
Confirmed messages can be sent 
@lavish gate Apologies for the channel change. Getting an error in #zigbee-archived when I try to send any additional messages. Not sure why
https://dpaste.org/qsZao That's a lovely little site. Thanks
What error are you getting?
I've seen a few new members report problems sending messages, so details would help us work out if Discord are doing stuff again
Discord's classic upload failed. Which I'm guessing is some sort of panicked hangover from when I tried to have it convert a lot of JSON to a text file.
Ah,so ... upload failed is because you don't have the rights
It's blocked in most channels by default
Nope. Discord reboot fixed it
No idea what file it wanted to upload. But it was failing
Awesome ... f*ing Discord
My guess is: Big JSON text tried to "send as file", that then failed. But due to permissions, didn't display that it wanted to upload it. Which meant a reboot was needed to fix it thinking there's a file to upload
It does look like it may have been pulled. I, too, wish there were release notes that I could get to include in this
yeah, it's been trying to update to a PIC version ending in .80 for a while now and always fails, both in HA and in their official app
now it looks like they gave up on it 🙂
The only mention of firmware on their site that I could find are for specific issues, which just have "update to the latest firmware version" for the resolution
Love stuff without proper release history
especially when they update as often as they do
and there are as many complaints as there are
I submitted a support request with Whisker (extremely detailed) asking if it was pulled... Today they got back to me with a simple response "you're already on the latest firmware" 🤦
Pissed me off more than it probably should
Got half a mind to replace the ESP32 and try to get it working in ESPHome
If it has an esp it should be very easy
it has an ESP, TOF (time of flight, I guess, for the lasers that detect cats/measure levels), and PIC (interrupt controller, I guess)
I thought I had extras, but had to buy some for my garage door opener project
I knew I had some
wasn't hard to get them
I wanted to use one of the bases that I already have, but of course the ESP board width was too small for the base. Drives me nuts - same thing happened to me last time
I don't think you'll be printing one of these: https://www.amazon.com/gp/product/B06XHGYPLY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
from a comment there:
These boards are designed specifically for the LoLin NodeMCU boards ONLY. There is a problem with Amazon recommendations (Frequently bought together) that recommends this board and the HiLetgo NodeMCU which does NOT fit this board (too narrow).
pfft
There's never enough ESPs
Oh the dev breakout boards
I have a bunch of those
And fitting modules
Great for testing stuff
https://www.reddit.com/r/litterrobot/comments/10cv93j/unable_to_update_lr4/j4qpd9p/
Whisker Software Engineering is working to resolve an issue with the OTA updated server. The update button should be gone now. Please stay tuned for future updates and if you have any questions/issues in the meantime, please visit https://support.litter-robot.com/s/?language=en_US for resources!
8 votes and 10 comments so far on Reddit
Raccoons are under appreciated af
They're like carp of the land
it's all good till they attack you
kicked my partner a few times sleeping when coons attacked me in my dreams
neat
Ermergerd
neat
But, we already have openmqttgateway
"We were tipped off to this project by [1technophile], who tells us he’s integrated the rtl_433_ESP library into his OpenMQTTGateway project."
I tried to avoid stepping on my dog and smashed my toe so hard that I just walked around the house cussing for 2 minutes. I only stopped because my dog was worried so I gave pets.
I did the same thing like 6 months ago and it broke my toe nail in half and it's just now better.
I am doing something wrong.
LOL
You are my new best friend
That gif
I need to know who that is
When I was a kid, we went camping every month. Only ever ate sandwiches... Hated those sandwiches.
One day the raccoons came by, opened the cooler latches, and ate all the sandwiches. We had to get McDonald's.
Raccoons and I have been bros ever since.
lmao
R/tinder post lol
It’s from today maybe it’s actually the op
awww yea receipt printer get, now to figure out how to make things happen with it thru hass :3
I broke my pinky toe in the beginning of December. Had to work from home for a week so I could go lie down frequently.
I was able to turn my Raspberry Pi into a touch sensor using the built-in CPU temperature sensor. By writing some code to detect when the CPU temperature increased – such as by pressing my finger against the CPU – I was able to trigger an LED to turn on or turn off. Check out the video below for more detail:
hmmmm....
o.O
I would have loved to see that
when gpio pins are too much work
My water meter is about to hit 420420. https://share.busheezy.dev/i/Bp3gng
legalize water
Why not "model: raccoon-ORION" 😦
alright, which one of you guys leaked intel on the f-16 in the warthunder chats
didn't we have a rule specifically on this
| sed -E "s/Badger/Raccoon/g" https://share.busheezy.dev/i/w4MTTm
Notice how much betterr the SNR is now?
Raccoons are clearly superior to badgers
says he runs arch
Hey, i love my booth merch from VMworld
:O
you and cleaning?
I don't trust it
if you do a 180 you will find a pile that may or may not contain forgotten children
is that some Matrix-like alternate universe?
you ever make any footpedals?
They changed it to "VMWare Explore" now 🙄 bad change
Lots
Yaaas
Eh, it was fine, I missed just as many presentations virtually as in person! And I didn't have to run
DefCon is the real alternate universe. People don't even use their real names (at least I don't)
Do people use real names on furry cons?
@clear ferry I don't play any instruments but I've wanted to make some pedals as gifts for some reason for a few people I know but I don't know what to do 😛
This one is very good
And this one
thanks!
https://tailscale.com/security-bulletins/#ts-2023-001/
Tailscale bad. Never tailscale
only place i could post from what i can tell, but it is stupid how fast these new bulbs are
sorry was watching the fact you were using a wireless mice as a remote light switch to notice anything else in the video
lol i couldn't think of a better way to demonstrate than to just hover over the toggle in home assistant and walk out there
Just look at hue entertainment for example, they steer multi-segment led strips like its nothing or hardwired
what's the node id? it's not the name you asign it
their entertainment stuff must be different to their bulbs because i was using Hue bulbs before, a bunch of latency
i don't think the latency is inherent to any of the protocols hue uses, i think they just "sleep" the devices or something so the initial wakeup takes more time
Some id they keep in their backend? Its presented somewhere to you..
yea some off the wall integer. even if they didn't state the issue was never once used I still wouldn't worry about it lol
Hue has some proprietary stuff; while it can‘t control latency much like anyone else they can do separate channels simultaneously for updates and channel switching. Its way better than normal hue as you said
Single point of failure, thats what i see when I look at these centralised technologies
i don't think i'd ever be able to get a hue bulb responding to clicks before they're even released like the Shelly's do
did you read that whole issues page? I think they did pretty good
Zigbee is zigbee, the bulbs all react the same for me 🤷♂️
well i mean that's why i said this
Yes, my point is the same though and has nothing to do with this incident
worth it to get zigbee bulbs rather then wifi ones with custom firmware?
Any day
this video was with wifi bulbs
what's yuck about it
high energy use; bad pf on th bulbs i have
They occupy transmit time. Long live zigbee!
ignore them lol
i haven't measured the energy usage of hue bulbs but the Shelly bulbs i'm using are 7-8 watts at full brightness
actually closer to 9 watts
I just like to keep my wifi clean and strong 😜 none of that bulbs-calling home stuff
and off?
obviously they aren't operating on 0
i don't have any rigorous testing devices though
So its LIES
i mean i trust the values that Shelly reports, i take it as "this is how much energy it takes to run the LEDs themselves" rather than "the total usage of the LEDs and controller"
pretty sure the internals are basically just another Shelly relay crammed into a slightly smaller form factor
Think about how well your wifi runs with 100 bulbs
Pretty sure not as good as having only real network participants in it
It starts with 1
if you want wifi speed use 5g
And is another reason people use zigbee
hows zigbee work in highly growded places?
ZigBee my bae
I live in an apartment block and have no issues
sorry but wireless access points don't care about "real network participants" vs iot connections, at least not for the wireless access point on my network. the thing that matters to a (or my) wireless access point is bandwidth saturation, not the total number of connected devices
Oh boy
Well except for a single tuya blind controller, but that's tuya
you act like the zigbee protocol adds 0 interference to your wifi lol
You can set it up to have minimal interference or none at all yes
same as bluetooth; and many other hogs
i just think that you are heavily overestimating the impact that a few devices sending minimal MQTT traffic has on a wifi network
Its Fax
granted i'm a sysadmin and not a network admin
i mean if it was as impactful as you say it is, my wifi should be unusable any time i have guests over
they're overloading the wifi!!!!
Zigbee devices, especially battery powered ones, spend most of their time sleeping. Wifi devices need to constantly send keepalives. If you have a ton of devices, that will add up since the AP can only talk to a few devices at a time
just add another access point double up on the noise
i mean this would be an issue if a handshake took 5 seconds to complete
but keep alive packets are almost instantaneously processed
those handshakes don't mean anything as long as your network is decent to start with
I couldn't even tell you the amount of diffrent wifi crap I got going and never have any issues
i just upgraded to the latest unifi hardware
access point was actually an early access purchase
It works is different than it works at full speed for everything i have.
And if i go out of my way to get a good AP i want its speed for me and not my bulbs
if I was to have 300 iot devices and 150 computers with smart tv's phones etc.. i could see the issue lol
i use routers as waps
i mean if you're trying to do 450 devices on a single access point you're already fucked
Lol unify
lol
and disable all the route satuff
You wont get the max speed anyway, i see 😅
i mean i've done a couple dozen speedtests to verify that i've set everything up the way i want it and it's all working perfectly
¯_(ツ)_/¯
nope; never far as i know
i can do gigabit over wifi; but it's slow verses my 10g network
i've only got a gigabit uplink right now, nothing better available here
sane; but i likr having my server on a fast network; max out inet; and not slow down my local traffic
i'll report back if i decide to make the switch completely from Hue to Shelly though, see if all that crazy air time usage really does add up!
7 ethernet ports in my system.
My current setup until I get around to buying enough hardware to justify rack mounting it all
may i recconend a lack rack?
lol i've considered it, but when i decide to rack mount it'll be in an actual rack
usually there are some decent deals on fb marketplace i've just gotta find the will to drive
they're like $2?
at least make fun of me for spending stupid money on something that actually costs stupid money
lmfao
For 0.1m, which is $20 per metre
For $30 you could buy like 50m of ethernet cabling and do it yourself
money not stupid
or i could just add some cables to the order i was already making
I have a unifi WiFi6 AP, and one of their 16port switches with POE
Works well enough for me, about 600mbps over wifi
(From client to local server, not trying to get it perfect)
i've pushes more then a gigabit on my belkin rt3200
I'm not in a perfect location, nor having perfect conditions (eg other network activity also going on)
1.25ish has been my max
For average use case, 600mbps is great
rt3200 is 👑
But its belkin 🤮
fair enough
I've seen it for $50ish
i mean yeah that is the plan, and like i said before i'm not really gonna be able to add more than 20 bulbs to my home
i've just got a few vms right now, i'll definitely start spinning up some more once i can bum some decomissioned hardware from work lol
well unfortunately right now our decomissioning procedure is kind of vague and i think it basically ends up at "it's all in some room somewhere" but i'm not sure
it's the only affordable way to get 10g network gear
most of my gear is second hand
right now my vms live on my old laptop
Dell r620 for my vm's
and when i get around to upgrading the mainboard of my current laptop i'll do something with the current one to host some more
damn that's some big boy hardware iirc, at least if i'm not getting it mixed up with something else
i think we've got some in prod
I was planning on ordering a brand new R250 in the future, i'd like to get new hardware for power efficiency and longevity
wish they made an R150
i don't really need much, i'm not doing anything crazy
dual psu's have saved me multiple times
but a proper battery backup would have done too
is the power savings worth the extra cost of new hardware though?
over time probably, along with it lasting longer by virtue of just being new
maybe
I have a 48 port switch that I got for free, noticed it drew 60W at idle, and bought a used 12 port switch from eBay that paid for itself in about a year
sure; but switches are cheaper then $1k servers
But you can do a lot with a $100-200 thin client
or buy a server for the same price
And pay the much higher power costs for the life of it, thereby paying way more over time
depends on power costs
last 5+ years of my life or more powers been included in my rent
double life hack rent an office with power included and get a gym membership
and mine crypto for heat
could always be an ahole; and just do dual 40mhz channles on wifi and max them out blocking nmost networks
2.4ghz
can't say it's much better with 320mhz wifi channels they are pushing now; rather then more streams
has anyone experienced issues with tuya/xiaomi devices just disconnecting from the wifi for no reason?
All of my tuya devices just did this and I can't figure out why
Lol fucking tailscale bullshit
That nugget still beats
Please ship 5 without a devboard
Thx
Do questions regarding HACS belong into this dicsord server? There is a HACS server, but the boards are limited to HACS development and HACS publishing.
Whats your question then
i got a i7-6700 desktop pc for free, after adding 32gb ram and 5x 2,5" 1TB HDD's and some power optimizing in linux, it uses only 25W on average
Using things in HACS are here, though not in this channel
I've got a free i7-3770 desktop running as my nas now, 2 8tb drives and a single 500gb ssd cache
Works wonders
Mine uses 40W 😢 and i have ssds… but thats OK, its not on my circuit 😅
my dual E5-2620 v3 with 128G RAM, 8 internal drives and 4 PCIe cards pulls 95 average
so that is fine
also 6 nics connected
Eyy you've got the same CPU as me
With double the ram lol
I need double the memory, waiting for customer to retire some old servers
I was thinking of upgrading but energy prices still can go up by a lot to justify that upgrade… and I found out again that the socket and future proofing stuff makes my brain go brrrrrrr
Imagine energy prices going up
Mine dropped 30% this year, chose a better plan
Plus no price hikes on the way
just wait till the Koalas catch fire in febuary
As long as the solar panels and wind farms powering my state stay alive then I'm fine
DJ atx spinning up his servers
and playing synth
and cleaning office
while doing meetings

changing the cpu governor to powersave and running powertop helps out a lot, trust me
But then you lose power
jokes on you, i'm using it for stuff a pi could do too
but its been cheaper than a brand new pi4
oh no how terrible, i loose 5% of performance for a massive >50% power saving, i dont know if home assistant and grafana can even still run on it ):
Eh I prefer performance, especially for $35 extra a year 😛
Eh i prefer my 15kWh battery not to drain in 300h but in 600h
Ew battery
ew high energy prices
I don't have them, and batteries make no sense with ROI
you don't use the W values from powertop, do you? because that says 5W for me 😂
anyway, it transcodes and serves tv to 20 people, I believe its fine at 40w
desktop powertop says 5W
Lower usage than my laptop then lol
My server estimates this, but is actually pulling 95w
My question regarding HACS. I post it here, as long as I think it is OT for other channels:
The HACS GUI displayes two types, integrations and frontend. According to the docs, you can also ship python scripts with HACS. Where do they go?
@midnight adder tinkerer already told you that there is no support in this channel
you better go to #integrations-archived
Please read the channel topics @midnight adder
There's no support for Home Assistant here - please look at the other channels for that. If you can't work out which is relevant, start in #general-archived.
If it's a question about the HA Yellow see #yellow-archived, and #330990055533576204 for the Blue. Install related problems go to your Installation Method channel.
No politics, religion, or any other obviously contentious topics! Please ensure you've read the Code of Conduct (https://www.home-assistant.io/code_of_conduct/), and #rules.
If you found this server and want to know what it's about, start with the web site: https://www.home-assistant.io/
Remember when reporting spam to include a screenshot of the spam and the user's handle (eg @spammer#123)
HACS is an integration in the end
This is the channel for racoons and laughing at @clear ferry
@atxbae

I on purpose use the off-topic channel not to miss the topic of other channnels and I get told OT does not belong into OT. Isn't there something wrong with this kind of culture?
Except HACS isn't off topic, HACS is an integration, thus it goes in #integrations-archived
There's no support for Home Assistant here - please look at the other channels for that. If you can't work out which is relevant, start in #general-archived
Troubles getting a Home Assistant integration set up (other than those with their own channel: energy, cameras, voice-assistants, zigbee, zwave, and analytics for InfluxDB/Grafana)? This is the place to be - whether built in or custom
From the #integrations-archived channel topic
I bet you are a powertop @umbral cliff
Anything HA related is on topic for this server, and so off topic for this channel
Okay that made me giggle
I'm holding on to three customer elevations to engineering now, while planning an upgrade of a customer environment with 450 switches
if I can make you giggle
that keeps me sane
what did you break
Lets see the reations there ...
Just post in #integrations-archived and someone will be able to help
Ah ID10T errors
I love my job, and I just can't fathom people who would work with anything they don't enjoy
like one american guy I'm talking to that wants to retire at age 45, he asked me how much money I would want to retire, fuck I will work till I'm 80 if I love my job
I would retire, if only to have more time to myself to do the same shit but at home
And do some private contracting
Thats what I want to end up doing
Will any work with cameras for ocr or 7 segment?
Sounds like a pai... wait https://www.home-assistant.io/integrations/seven_segments/
Homepod OG: slow start, production issues, software problems, gets pulled 2 years after release
of course I'm going to buy the Homepod 2, Apple! lol
Sheeple
Wish google made a smart speaker that looked as good and worked as well as the homepods
The google home medium kinda looks like they took notes and made a halfway recreation
I like how cleanly the google minis mount on walls and outlets
They mount in walls if you throw them hard enough.
LOL
My yubikeys did not get sent yet 😢 they wrote end of december
They were left under the door mat, so Michelle has them now
Since 2005 a man has regularly been taking poops in the golf holes at the Stavanger Golf Club in south-west Norway.
A PCB that can solder itself and then be used to solder other boards!
PCBs manufactued at PCBWay - https://www.pcbway.com
Get a free trial of Altium Designer with 365 and 25% off your purchase - https://carlbugeja.com/altium
My Electronic Kits - http://flexar.io
My Merch Store - https://teespring.com/stores/carl-bugeja
Help me make more projec...
way too many smoke
lol
The fact it's pretty much useless doesn't make it any less quite cool
Ah. I thought I recognized the accent. That's the jumping pcb guy isn't it?
yes
smack smack smack smack smack smack smack smack smack smack smack smack smack smack smack
That is really cool!
if it was standard and added no additional cost it would be cool
I retract my previous comment. It actually may make sense for very small production runs.
till you realize it added cost to the product
with no beneficial use to the end user
Yes. But if you have a free unused layer from pcbway and no hot air station and you want to make like five things
It may make sense.
anyone know of any local control pet feeders?
sure for personal use.. i mean it's your money
i've got a PetSafe Smart Feed right now but the integration in HACS is cloud based
That is pretty cool
For real production stuff - no way
Aqara Smart Pet Feeder C1, requires Aqara Zigbee 3.0 Hub, Zigbee 3.0 connection, 4L tank capacity for around 16 cups of food, best for cats and small to medium sized dogs. Dry food dispenser with desiccant bag for cats and dogs, supports portion control and programmable timer, supports Google, Al...
Maltese, apparently.
That explains why I couldn't recognise it
Whose Line Is It Anyway - Film Noir
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to español..! Yes to English ( shows )
No to e...
Never talked to Maltese people
I used to do some contract work for a guy from Malta but he sounded very bruv-like
I paid someone to run cat 6 lines for poe cameras at my moms. 250 a line wasn't bad for that cause they were pretty close to maxing out the range max but that same company wanted 250 to run a short line that was less than 10ft long
something fooked up with that logic
Custom home assistant App running on the ns Panel pro
did sonoff finally release the HA compatibility aspect with that?
I watched a video a few months ago where they stated like more than half the stuff that panel was suppose to work with wasn't available yet
fired up my lab for the first time in almost 2 months
I have a lot more VMs than I thought
80

And now I'm deploying another one
Nice
Pfft, that's what 20% gets you
Old fart
🧓
Does it rain down there?
yes
currently changing strings on my guitar
asked an old man for the way
he just said hurry boy
you are gonna love my new strings @keen bridge
I strictly play classical guitar 😛
I need to get a guitar again. I liked classical for the extra spacing, but electric is fun once the calluses have built up
I also want to get a piano again, but I need a bigger house for that
Midi keyboard with weighted keys + the ipad you already have
No but you can easily put your own stuff on it 😄 just need to activate adb and then you can install any android app
At the same time?
so the same way the other model had to be done
#hangout
Lot easier if you ask me - you dont even need to open it.. 😄
I once played bass, piano and guitar at the same time @last cedar
two hands and one set of feet
it's not a bad buy, considering the hardware
@keen bridge
NICE
Centipede?
Could have done a triangle as well 😉
No raccoon though
Goodnight everyone, enjoy your doormats last night in its normal place, for tommorow begins the heist of a lifetime
Pretty
I'm fussy, I need the right weights in those keys 😛
Not when it comes to pianos apparently 😛
I failed my Grade 5 exam the first time around because the keys were too bouncy and combined with nerves I forgot how to play the piano 😂
5/7
I was promised singing
What's a fithed grade piano player?
better ?
@static schooner wonder just how many people have done some form of this lol https://youtu.be/77fLeksKe-M
How i solved my litter cleaning blues.... I'm able to go 2 weeks without emptying my litter box. I've also included a bonus tip on handling litter.
Here’s a link to an earlier video detailing the top box build:
How to Prevent Cat Litter Tracking
https://youtu.be/XwGTdIApDpo
the rice dispenser is not a bad idea tho. kind of like that
"Can actually play the piano"
5 is an actual qualification, 8 is "is a really good piano player"
1 is "I can poke at the keyboard and probably hit the right notes"
😛
This is the sort of thing I did, though I mixed between our two major exam boards depending on which pieces appealed better
huh, them I'm actually first grade. Assuming I get to count from C 😄
B is A#
nah, it's standard
Maybe it was just my teachers, but I learnt both, and didn't fail any exams for using H instead of B as my answers 😄
But, B is not A#, B# is C, and Cb is B 😛
New students in Sweden learn B. I learned H. So I call them H and Bb to avoid confusion.
CDFGA/H are the ones that have sharps to the upper right on a keyboard 😛
I should learn the circle of fifths
I've been a musician for 30 years, I know very little theory
30 years guitar, 22 years bass, 10 years piano, 5 years drums
You only need 4 chords anyway
I, IV, V and VI7?
Australian comedy group 'Axis Of Awesome' perform a sketch from the 2009 Melbourne International Comedy Festival. Footage courtesy of Network Ten Australia.
See http://www.axisofawesome.net/ for more details of the comedy trio including Jordan Raskopoulos, Lee Naimo, & Benny Davis.
Journey - Don't Stop Believing
James Blunt - You're ...
Warning, they're Australian and the video contains words which may not be family friendly 😛
Old but good
Yup, them and Pachabel Rant are my "introduction to music theory" videos I share with folks 😛
https://youtu.be/uxC1fPE1QEE < For anyone who needs the link to the Pachelbel rant
My boss would love you. He has a piano behind him and 3 guitars on his wall. And another colleague has 2 guitars, a banjo and a ukulele
I have a ballaika here somewhere
my triangle is probably somewhere in the attic
That's the guitar that looks like a triangle?
yes
Cool
Similar to this
Also, norwegian girl band Katzenjammer play on a huge ballalaika bass
Written by R.E. Orrell & Katzenjammer. Live on NRK "Sommeråpent" outside of the Opera in Oslo, July 9th, 2012. Katzenjammer from Norway are Anne Marit Bergheim, Marianne Sveen, Solveig Heilo, and Turid Jørgensen. The song is released on "A Kiss Before You Go", 2011.
They are quite good
All multiinstrumentalists
I'm not sure you'll fit into those outfits though
I can try, but it will be awkward
Go to Hell, Pachelbel?
Hehe, he's a cellist. The poor guy got 8 notes.
Playing that piece on an organ is pretty good fun though
Another classic music theory analysis: https://www.youtube.com/watch?v=GcaPABgew_k
Ah, Bill
I want his horn contraption
Also, for those who hasn't seen this one, one of the best videos I've watched
John Carmack is a legendary programmer, co-founder of id Software, and lead programmer of many revolutionary video games including Wolfenstein 3D, Doom, Quake, and the Commander Keen series. He is also the founder of Armadillo Aerospace, and for many years the CTO of Oculus VR. Please support this podcast by checking out our sponsors:
- InsideTr...
Oh great... now you guys got me into The Newfangled Four black hole again...
The Newfangled Four
http://www.newfangledfour.com
http://www.facebook.com/thenewfangledfour
https://www.youtube.com/newfangledvlogs
Supercalifragilisticexpialidocious, arr. by Anthony Bartholomew
Performed live at THE AXIS | Planet Hollywood Las Vegas
Las Vegas, Nevada
2017 Barbershop Harmony Society International Convention
Join us in Orang...
I was supposed to sleep tonight 😦
What is sleep?
Baby don't wake me
Thanks for the rabbit hole 😄
Oh God, they sing Avenue Q. I have to stop before this turns really bad.
Good night!
how did you get up there in the first place?
Yes
Let's focus on the future rather than the past...
That seems like some mindfullness bullshit
Someone has been to a corporate training session
you see Laura handing a business partner 9000 dollar bills, you know we are currently doing business with this partner, what do you do?
A - ask for a 50% cut
B - bonk Laura on the head
C - tell a manager
We have three whole trainings with stuff like this every year
Jesus fucking Christ
We have 4, at least they're online and just easy to click through
Code of Business Ethics
B, then A, then A again
Reminds me, I have one of them to do soon, going to do it next week when I can't be bothered doing actual work "Sorry on training"
LOL
Yeah ours are online too
I even have to do some ridiculous tax training
Because I might be involved in business deals
Fucking Americans
I have to do them twice :/
once on the Alphabet level, once on ours
I like the "please make sure we don't get sued" courses though
I love that the level of the trainings suggest I work with a lot of corrupt people who have an iq equal to pi
No wait, i work for Americans
Carry on
We also have phishing, etc training as well (how to avoid phishing). Its pretty easy
Managed to avoid phish tests since they all come with a header that says they're a sample phishing email. So I just filter by that and put them in my deleted email folder
Ah, Mr OCD over here
I used to have thousands. I have 0 so far at the new job
we have an amazing amount of noise, but still more manageable for some reason
When we still did email lists for all internal support teams I could easily get 3-400 emails per day
That's excluding promotional mails and partner mails
Yes
I get about 4-10 a day
And another 5 or so on client side email
I get around 100 from our systems doing weird stuff with code changes
we moved most discussions off to yammer \ teams \ slack these days
So, yesterday was 31 mails total
Yammer is shite
or, 31 discussions
Teams is actually not too bad if its set up correctly
I never liked slack
Yammer is just a corporate social media
Baked onto sharepoint
teams is fine, but not for collab, but great for meetings and planning upgrades where internal \ external can share a single sharepoint with files
Let me tell you about Jabber
Skype for Business is shite, can't even store message history
skype for business is retired now, so hopefully she doesn't
They only just migrated 6 months ago
Its still installed on her computer
And I know at least one other place that still uses SfB constantly
Why do you think microsoft is re-re-supporting it
SFB is supposed to be superseded by teams. But 😂 as if MS ever actually deprecated stuff
They now run support for those clients (like government) who are still using it
Lol 2025 support for SfB
Oh also @clear ferry this is the same organisation (my mums) that upgraded from win 2000 to vista then to 8 then finally to 10
L O L
I have one customer still stuck at W7
and I go like
what
at least I haven't seen an NT3.5 server in the last 10 years
How much of that happened in the last 3 years?
Only the 10 part
They upgraded to vista about 1-2 years after 7 came out
Airgapped or internet connected?
Since there would be plenty airgapped gov related stuff on 7 lol
Gov upgrade 3 years after something is EOL after all
internet connected
dark sites are very good at upgrading stuff
government, not so much
I'm sure there's some govt systems running XP with a sepcific version of IE6 for some archaic internal site
The same people who buy IBM z10s then
IE compatibility in edge works pretty well
is that IE6 or 9? ( I think that was the last before edge?)
It works with 6 i think
that doesn't sound right
best regards someone who is old enough to have upgraded to IE6
👶 
every time I spin up a windows vm I go like what the fuck, this is like a kids computer
Also, this is probably one of my favorite electronic albums ever, Germs do very good electronica
No, how did I get down last time, if I forget that it was difficult, because there might be food there this time
Got 3 jobs at substations today, so hold of posting the stuff @clear ferry it might be a waste 🤣
Address:
Pile of ash
Somewhere in Sweden
Sweden
YEAH, I like that
When you hear the buzz outside the room you know you are in for a treat
Not completely off topic, but what is one integrations / extension you didn´t know you needed but now cant live without?
in #general-archived I'd say the radio browser integration changed my life to the better
Hmmmm, I need to get my new drives soon
have to migrate my VMware lab to some other storage
so I can move the SSDs
NVME?
No, SATA SSDs
No, I was meaning, are you moving the lab to nvmes?
the good ol' unreliable
My Airconsole 2.0 finally died after like a decade
so I ordered an Airconsole LE
bitch has 6-9 months battery life
👀
cant it leech its power from the connection?
nope
I got some 80GB IDE drives you can have if you want 🤣

I do have some 600GB 3.5 disks
10k rpm, or maybe 15
Draw about 17 mega watts and heat the entite muinicipality, but you are more than welcome to take them off my paws
Wuhu yubikeys shipped
Nice
@clear ferry 1 left, still a chance you can come by and sweep what is left of me up
I'll bring a vacuum
Long hoze, for safety
no metal hose that is for sure
How am I supposed to work with this?
I was using the other wired one during my migration of my Linux box to a new SSD and don't need it anymore. It's just taking space now
I needed it + an old monitor to get into the BIOS of my old box
Give it to me
Would have 5 friends and 1 enemy at our house
Baiows
nothing wrong with two keyboard's it's only problematic when you have 4 of em
I removed the extra one, so now there's more desk real estate for her to sprawl into. But I think pushing stuff out of the way is half the fun...
my sister's cat's would agree
that pushing stuff out of the way and off of things is fun
i have two keyboards in my desk :/
one hidden behind the other
Only half? You need to exchange that feline, pushing things off of desks and so on should be at least 90% of the fun!
the lets make my human pick this up is part of the fun too
so they can just knock it back off again
Along with "look like I want belly rubs", wait, "too many belly rubs, not allowed!" 😛
some cats like to get gently spanked too
It can be a fine line, but not really with this one. My other one will gently nibble on my hand after a while.
You can keep doing that, but I'm going to eat your hand. Your choice!
Wait, yours doesn't start by just removing all the skin? 😄
I have fish that attack my algee scrapper..
fish isn't happy with the scrapper
swims around watching for it just to attack it
not at all, give cuddles now
🍑 🦫
I have to scroll again to get to this channel 🤬
just hide all the bullshit channels
or tell the @møds to place this on top again
😉
You just want to yell at people for being in the wrong channel again
I don't kink shame you, no need to be mean
@clear ferry I found your christmas present
Yaaas queeeeeen
heard you guys like printers
https://m.media-amazon.com/images/I/51fBkGFvaiL._AC_SY580_.jpg
Lål
EVs can drive in the bus lane still
In rush hour they have to have passengers though
Why don't you stick your kid in the car and drive in the bus lane then
so i got a chance to
A. test my home assistant / elk m1 fire alarm system setup yesterday
B. use a fire extinguisher
How is the robot involved in this fiasco?
A fire inside a dryer? What were you doing? Roasting a chicken?
Also, first top loaded washer I've seen in a few decades 
gas dryer?
Yikes, gas dryer, what a nightmare
innocent bystander unfortunately 😦
according the firefighters, the belt probably slipped off and the thermal fuse didn't blow....fast enough anyways. dryer is 2006 so like not SUPER old but you'd think it'd have a sensor that could say "hey it's getting pretty fucking hot in here"
don't sleep on them top loaders, they put in WORK 🦾
electric
Yeah, that sounds horrible, then again, I've replaced my dryers usually every 10 years it seems 
they came with the house and were analog which I loved, the less brains the better.
unfortunately in this case, that analog fuse failing to trip was its downfall
Based on the design i would have said mid 90s though
YES
fire extingisher on every level of the house
and don't get the 5 pounder
get a 10 or 20lb
that 5 pound didn't do SHIT
gone in 5 seconds
if that
i cannot stress enough how clutch it was i had multiple fire extinguishers in my house
and the nice thing about the big ones is they're refillable....buy once cry once but you'll be glad you have the big boi
did you google your dryer to see if other people had the same experience?
not yet but it's a ge dclr333etoww if anyone wants more info on it
maybe a bit before thanksgiving
I have yet have a fire anywhere I've ever lived, but I have one fire extinguisher per floor and replace them every 5 years
Damn big fire extinguisher is taking advantage of me
AND a comforter? how big is the inside of that thing
i have....sensitive skin. so i wash pillows like once a month
i think it's like 7 cu ft or something
it's not small i don't think
you ever clean out the lint and exhaust?
I have like 10 pillow cases that I just constantly switch
every time
always clean the lint trap
and the pipe yearly
it's rather short so very easy to clean
fire started on the inside of the heating coil
air moves weird through it, but you think a thermal fuse would be in there to find it
idk how hot dryers get normally though
but i guess start a fire hot is an option
I feel like air quit moving over the coil and it got super hot
could very well be
I have never had a dryer able to hold a comforter AND pillows, lol
he said the belt broke. the belt drives the fan that moves the air
don't the fans attach to the drum? so like if the drum stops spinning, so does the fan?
"probably"
i can't confirm 100% the belt is dead, just what the firefighters said
haven't done an autopsy yet cuz it honestly smells like hell in the laundry room rn
pillows caught fire
It's a TARDIS
that's what I am saying
THAT IS SO MUCH STUFF
I have to take my blanket out and fluff it half way
it was full, but not anymore full than i normally pack it.
and not nearly as full as it HAS been before lol
3 PILLOWS AND A CONFORTER?
I have never washed a pillow, so idk, I have washed duvets due to kids wetting the bed though
But never more than a single duvet alone
yeah, bought a new dryer afterwards.
9 cubic feet
ain't fucking around now
D:
well be glad you were home when it happened.
very much so
about the only use the smart ones have. being able to be remotely turned off lol
I've had taco bell, water, fedex, and usps all here within an hour. busy morning.
dog is on high alert
you have taco bell door dashed?
as opposed to driving there myself?
yes, almost ordered mcdonalds but got tacobell breakfast instead
sounds like playing russian roulette to me
like being messed up or what?
yea. taco bell is one of the few more frequent one that screw up an order. not to mention I don't think they seal the bag?
your taco bell screws up orders
ALL fast food screws up orders
I should have said "more frequently"
the bag was not sealed but my food was in the bag
another aspect to russian roulette lol
putting a lot of faith in your delivery drivers
not really. you're making it sound hard to be a decent person
just don't go listening to the news
my food goes through many hands I never see. I'm not going to be worried about the few hands I do see.
brave man
scared man
damn right lol
"The poll was contracted by Circuit Route Planner, an app that helps find the shortest and fastest routes for delivery drivers who make multiple stops."
there are clips about the same thing all over the country
that was just the first thing that popped up
If you're worried about what a delivery driver might do, don't ever eat at a restaurant either because most kitchens are filthy
filthy from use and what a driver may do to your food is two diffrent things
just happened to see my robot vacuum on a camera, lidar has some pretty cool effects 😎
umm, how do you know that isn't the cat's eyes?
what you talking about? that cat is blind from all the exposure, it just uses that thing to find it's way to the litterbox
this made me chuckle a little https://youtu.be/Jl0-Yu3KZDI
Today at the World Economic Forum Annual Meeting 2023
T - S H I R T S - https://teespring.com/stores/trendy-tee-10
T W I T T E R - https://twitter.com/j_t_starwars
I N S T A G R A M - https://www.instagram.com/john_talks/
P A T R E O N - https://www.patreon.com/johnpomajr
T H A N K S F O R W A T C H I N G !
@static schooner what did I get myself into 🤣 automating recirc became a rabbit hole.
Yep! I spent a long time tweaking and rewriting all the pieces multiple times
what other simplistic parts of life are you going to overcomplicate next?
hmmm
wanted to use stream in nginx
with ssl_preread
so I could do both ssh and https over 443
but that was not as easy as I thought
@clear ferry I converted your message into a file since it's above 15 lines :+1:
screw you bøtt
@static schooner you ever get that LR update thing to complete?
Today, yes
did you initiate it from HA or the app?
1
I did it from their app. It still keeps spinning forever, but eventually I went back and it was updated
yea I had done it from the app as well. HA still shows an update for it, but maybe that takes time to update. not sure






