#🔧│keyboard_modding
1 messages · Page 921 of 1
Typeplus x YIKB Screw-in Stabilizers are patented stabilizers that utilize a more secure wire mechanism to reduce wire pop-out during use. It also has a POK housing material and new mold for a more consistent travel with minimal wobble and rattle. Can be installed without lubricant or apply lube for an even better typi
Divinikey is the most economical for me
considering they ship locally
sadly they only sell sets of 4 2u wires, I could just buy the wires separately BUT spare stab housings dont sound bad knowing I will 100% loose some
the 60HEv2 comes with FR4
I prefer FR4
Ah, I wasn't aware. I thought it was like the 80HE
I watched the keyboard man vid and the CF sound TOO pingy?
I cant explain it but its too pingy
ugh I really wish FBB and NicePBT gave UK ISO support it's goddamn infuriating
Any idea where I can get a good keyboard strap
I dont think you can strap one of these on the 80he
those ones are meant for the little tab on the 60he and v2, unless the 80he case you're using has space for one?
they are using a GT80 which has a strap attachment
ooh, wouldnt the board be too heavy for a strap?
intresting though!
In that case go with a feathery one, those always look great lmao
the strap is just aesthetic, not recommended for actual use
he didn't realise our switch selector is actually better it seems
he said wuques switch selector was better, despite ours having much more options, so I assume he never checked to compare our latest firmware

he was too focused on the zoom knob 
8 new switches with more otw
maybe he should go to HE school and learn what he's talking about
Why does Hippyo have such a hate boner for the wooting?
back when I was debating a pre-order it seems like he keeps mixing up who the keyboard is targetting?
he dosent get the appeal of an analog keyboard and features like rapid trigger and gamepad emulation
Honest to god was close to convincing me to just give up and get a rain 75
thats because he doesnt play games and types since hes an MX andy
MX andy?

hes not a gamer, nor should his opinions on gaming really be taken seriously
but yea thats what I got from him, he dosent seem to get HE so he just shits on the idea
its like getting subpar chicken at a steakhouse
He ALSO has a habit of supporting Chinese manuf
theres nothing wrong with that and most manuf are chinese based but Ive noticed that
he loves tmr.. because he can use his MX switches on it 
explains his keychron love lmao
beyond his videos I hate how he's just mr.beat for keyboards
real
"I put cat shit in my keyboard, and it sounds like HEAVEN?"
no but Im glad I wasnt the only one who felt that he was fundementally not getting the idea behind it for all his wooting reviews
like linux tech tips with the steam controller
ive never forgiven him for stalling the 80HE white zinc launch which didnt really result in anything but an extra 2 month delay
what did he do?
I ordered my wootings just on the website and never kept up with anything until recently, then I found out about this discord
mostly just shit on it and was surprised PCR and lekkers dont sound/feel good
its an old video
AND that delayed the launch? lmao
yea I remember that video
he got me into keyboards with a keychron Q1 max
iirc had some chipping issues with the V1 so it ended up getting it removed from production while they investigated it but old news now
wasnt just him, but he was the first light on it
Ahh! well yea thats kind valid
he wasnt the same since he showed his face reveal now its really over the top
I only ever ordered plastic so I never noticed I guess
oh lol he is the reason people ask if it still got paint issues 
He's also the reason people keep saying the Fun60TMR is a wooting killer
hyped it up to NO end
cro needs to put the kinetic sand back in the box
well it's tmr.. it leaves room for beautiful MX switches 
I stopped trusting him when he pointed out the wooting software was overrated and the Fun60 software was FINE
whats the point of a HE keyboard if you dont have good and reliable software support lmao
best test for a long term keyboard is to see if they add knob function after wooting does it
anyone can just make a 8k pcb and call it a day
I imagine most will copy the zoom64
he just needs to stick to his lane
its easier to just a daughter board in the case
hes wearing a gamer cosplay skin suit without being one
yeah, but wooting will do it so that you only have to buy the knob, so you can place it on any key you barely use.
not a $100 case
which is sketch chinese keyboard reels that are "Reviews" that follow the same pattern
I’ve been told this…. Keyboard???? CAT 🫢🫢 sounds like?? 🤔🤔 heaven????? 😳😳😳😳😳😳
he's not really a reviewer, more so an overviewer who decides his script ahead of time
what brain damage does to a mf
its all the sand he keeps putting in his keyboards
OH
its course, rough and gets everywhere
maybe he uses that lead tape that sno was talking about a while ago
he has a formula which is evident for each video, where he has a specific topic he wants to focus on and hit on, so he's not really reviewing but just talking about a keyboard in relation to whatever his actual point is
that would make alot of sense
I wouldnt put it past someone like Mchoose to just make a cheap alu case that has a JWST cable with a knob integrated. Granted im not into PCB design so Id take your word on it
that was SO Damn stupid
real
and irrisponsible lmao, his audience is largely kids
he's gonna bring back lead poisoning
sno, how is your tmr masterpiece going btw? 
he wasnt promoting it but i think that was mainly just a keyboard twitter thing
but i wouldnt be surprised if he does secretly
almost done, finishing touches tomorrow then it'll just be waiting for final graphics from our graphic designer
that makes alot of sense!

if you put it that way yea, he forms an opinion prior and just builds to it
honestly hipyo is a top tier youtuber, as much as I hate his bad reviews, he's top tier when it comes to understanding formula and channel growth
his shorts highly link towards his long form content, so he grows via short form > builds longer term/revenue via long form that is longer versions of his short form content, and prints money from sponsorships
and his long form is all very specific formula and the same script and pacing that is proven to work for his audience
i just dislike that too many people don't realise he's an entertainer and not really a good reviewer
a lot of folks these days don't separate entertainment from good information, which is unfortunate
I just take the information I see rather than listening to hipyo's opinion 
nah LTT i think makes an effort even if they get things wrong to be fair
ever since Emily left Ive felt a downgrade in actual technical aspects of a review
maybe thats just bias, I loved Emily's apperances
although they don't always get things right and have bad videos regarding us in the past, in general i think they try to make an effort to be right or at least think they're right when they make the videos
whereas a lot of the entertainment reviewers don't care about being right
they just want to make an entertaining video with some point of theirs and don't care if it's objective or correct
for LTT i at least give them the benefit that they will get stuff wrong but i feel they often attempt or want it to be right initially
I hope the tmr video includes a minecraft parkour or subwaysurfer video 
like their early video on wooting 60he was totally off the mark and didn't understand HE technology at all, but that was more out of ignorance and not understanding the product than purposely trying to push the wrong narrative

LMAO
i promise you the tmr video will have a montage of the youtubers who mentioned tmr incorrectly
maybe even as the opener
I am really excited for that 
i do look forward to my vacation end of this month though, because writing the tmr blog hurt my brain
i had to take breaks every couple hours because the content was quite tricky to distill from technical info into normal speak
it's really easy to write a technical blog and really easy to write a more layman guide/overview but really tricky combining the two copywriting wise
the sensitivity stuff itself was a headache to figure out exactly how sensitivity applied and then try to make that not give other people a headache after i figured out what jereon and dominik were talking about
How to make non spacebar keys less hollow
Wooting 80HE wants its content back cro
hurry up and buy the owlabs case unc im getting tired

dont forget that his other complaint was that if you scratch it with a metal keycap puller, the puller would leave residue that you'd have to wipe away
that was the most comical of them all
oh no not bipyo
the tik tok keyboard guy
first mistake was wooting sending a keyboard to a g502 user😔 🥀
I don’t know what the ow80 has to do with this
Thock washed his brain
it doesnt let me cope in peace dammit
He had too much Tylenol as an infant I’m convinced

OMG
I know a man like this irl
its hillarious, I didnt know hongdae guys were actually a real thing
sounds beri open mindeuuu
unironically black/white semi casual is literally the uniform of all korean men going out to bars/clubs
not just hongdae guys
if you walk down any bar street on friday evening probably 50% or more of the guys will be in black pants, white top of some sort
only people who are truly open minded will find the hongdae way
korea is excellent at all deciding one thing is good then everyone falls in line
same reason why all the cars in korea are white/black or a shade in between
see a nice beautiful foreigner girl you must call her a "sweetie pie"
hongdae guy trend is old though
indeed now its ni howdy
TO BE FAIR thats the uniform for most men
swap white with blue and boom
thats all men in one way or the other
Fair play
yeah black pants with white/black top just fits everything lol
its a classy fit
its like the Uniqlo tee
it just works
Ive found that quality denim elevates all outfits
Denim shirt, jacket, pants, they just work if you wanna not wear the default uniform
bring a totebag and you "know fashion"
reminds me of this image (forgive the potato quality i got from pulling it off google)
oh that feller real tuff
not him also getting a line up to make him look sharp
and then posing
anyways fr4 plate is getting delivered next week
time to do science experiments on the silicone gasket
hipyo is a joke lmao
and the sharp beard trim on the cheek
i wouldn't say that, he has his preferences like everyone. He just doesn't really care about the benefits of rapid trigger and HE hates the chatter or magnetic switches, and much prefers board sound and feel of the board
though I feel he is massively downplaying analog keyboards and their real world benefits
it was bad in the beginning but i feel he is getting better when it comes to treating something as preference vs an objective review
i mean he compared two boards with different switches in a sound test
if we are talking about the nessage i just sent above, yeah that's not a fair comparison because swapping PCBAs shouldn't affect sound, that's more down to price, performance, availability, features, and software preferences
yeah today's video it seems like he put the thockier switches in the non wooting board to justify his position on wooting
Yeah, not sure what was that comparison
cant expect much from PCR knob slop boi

He put the cullinans or poseidons in the flux and heart of the oceans in the wooting
Not a fair comparison at all
Also you don't buy a PCB for sound xd
pcb has like no effect on sound relatively
he should have kitted them out the same and come to the correct conclusion that the wooting is probably better for the same cost due to the software
real hes a clown
he's entertaining sometimes but i don't use him for his thoughts, opinions, or judgements on anything
also all his shorts are identical and super annoying
"TMR Boards are better so i can put MX switches in them ☝️ 🤓"
you can see it in his eyes
"i'm a skinny boy from seattle i have a hairless cat and love green i'm so quirky"
LMAOOOOOOOOOOOO
“Yeah so I was a hard stuck silver in CS, but with coaching I was able to get to GOLD!!!!!! (No you don’t need a Wooting)”
<insert Hipyo soyface>
why are u guys so mean to my goat HipyoTech
damn the cat taking hits for no reason
Makes sense since you main MX 
summon the big black mx switch
unfortunately i havent used my mx board in like 2 months 🥀
better than any he build ive heard
You mean fortunately
Sounds like every Razer keyboard I’ve heard
u missed the un
no razer boards chatter
i love the nails on the chalkboard scratch
No, I’m a very deliberate man
who needs thock when you have scratch, new meta shit )))
who needs scratch when you can have crunch
Definitely a Hipyo viewer
crunch is a secret better hidden from the public 🤫
do you love knobs by any chance? 
i love my knob
and only mine
u creature
hipyo fan spotted 
no not the kb knob
my knob
You do need to be a creature to like mx black switches
You’d be an expert on the matter
i dont own a puke buckeet
lore i dont need to be reminded of
Quiet piggy
ur just not good enough to aim over weiner level with g502
tough luck
you're right
i hate how my insecurities show up so easily
yup
read it and weep buddy
avg a positive k/d ratio next time in bf6
The food channel is over there
actually its about reviving teammates ☝️ 🤓
Is it sacrilegious to say that I enjoy hipyo's content?
i aint the one who needs cutting bub
someone ban mr akbar
depends on the vid
i seen enough
Only a little
Today's was good
the wooting one?
Yes
He scared me with this thumbnail
note to self mr akbar also hates wooting 
it got two knobs, so you know he will like it before watching lmao
im going to buy a knob just to piss off varedis
I enjoy hearing people's perspectives which are both informed and contrary to my own
Funny bc the set used (mine) wasn’t in the video
i loveee goin 1/30 and havin 20 rezs
thriller
I love seeing CAD burn
me too
your vella is real nice )
anyways guys how do i goon on my kb without brickin it
Oi
for 800 cad why would i get an element when i can fill my whole board with wooting knobs
I am in the market for a secondary gaming keyboard since 80HE gonna be taken out back for professional use
what i need to lube my switches somehow
Because you’re too afraid to pair the DAC
So you dodging it
you using the vonom pcb, right?
im not afraid im knob maxxing
one big knob over multiple knobs
seems like a no brainer to me
why he givin the kid the wet tshirt treatment
For Vella yeah, was thinking of getting v2 but cases/key caps are ruining my vibe rn
he is giving you the spray bottle treatment
im not joinin the wet tshirt contest
yeah thats right get the split you traitor
you dont deserve 10u
I enjoy my v2 split 
What the helly
enjoy your split because once 20u is out
still kind of sad they didn't do the rakka thing
im up cuh
Arc forever upset no tsangan
Pour one out for the crodie
is 20u a spacebar that wraps around the keyboard like a smile
i like the way how you think
10u jumpscare
how can i alt f4 in my games now
i cant handle gettin dunked on by a 12 yr old in roblox football
i have to alt f4
Is this key like 0.9u? 
80he v2 leak jumpscare

can the community give input or suggestion to future wooting products because if the 80v2 only upgrade is a split space bar I'm going t-
"I want to speak to your manager ☝️ 🤓 " 
ping founder and wooting team 
and get a boot into your ass
dont promise me a good time

If you make a wooting 80he+ wishlist thread i will add my own suggestions
go ahead
Gn
My goatttttt 
Which switch is the deepest sounding of all the clear ones
Oh and which is the best for a smooth gaming experience
Does anyone know this Website? If not where would jt be safer to order
I lowkey wanna buy 80he next month but im afraid that another v2 gonna comes out and i will regret buy it
they wont come out with a v2 within like 2 year
Keybay is fine, can also check other vendors here for price https://www.alexotos.com/keyboard-vendor-list/
wooting 80he is the newest
the 60he v2 is only made to catch up to the wooting 80he
iirc
v2 wont come out soon
Question how is your taobao in English
you change it in setting
english taobao been a thing for a bit
but i think they lock some product out for english user
But you have to set to another country
if u set it up to another country some stuff doesn't show up
this i have no idea
cuz i am in chinese taobao and i am in aus
i can order stuff just fine
but last time i switched to english it locked some product out for me
so i have no idea
I mean you still can order but in chinese
Just learn the language i guess
8 years
not that much
I tried to switch it to English and there was no English option
Change the country
Lol they banned my account for suspicious activity apparently
tbh i have no idea how oversea taobao works for NA, EU and other
i use taobao when i am in mainland and aus and i have no issue with them
Yeah I'm not gonna have much luck as a US user
Who else got their Diamonds today?
china can ship to everywhere
wouldn't think its that hard
Oh yeah forgot about us can't order from taobao now
So if i would order from keybay
To Germany
Would i have to pay customs fee
Because i cant find any other web withbthe swithces available
@sly palm
How did hipyo get all those ocean whisper switches
Wuque sent them no
WUT HE JOINED T1??

FAKERxTENZ 
as content creator
How do you even use that 😭
it works 
no it doesnt how do you use it
its a joke (he was being sarcastic)
son
shipping is so ahh can you give me the location of the wooting outlet so i can just drive there and pick one up

which one
idk the closest one to hanoi, vietnam i suppose
oh shit you live in hanoi?
yuh
my family is in saigon
yeah i can tell
i am interdimensional being

i know a vietnamese when i see one
where do i live? 
you wouldnt want the whole wooting server to know

oh they know 
the home of the keyboard modding channel knows
Lolll HMX Reze


Need those
What's hongdae?
I did not meant to send that
It arrived @humble surge , I do not recommend haha. Cost me 5 euros + 30 euros in tax
I was just there lol
Totally forgot to check out anything keeb related
🫠
Hmm, interesting

anyone gotten a keebmat for an 80HE and which size was it?
They have an 80HE-specific model
tell your grandma to sew you one
Found it!
What the FUCK is this beautiful creature
It's a switch shaped switch container hahaha
I can store so much crunch inside
I can give you the taobao link but it's stupid expensive on shipping and comes in multiple colors
I picked red/pink
But it has many colors
Costs about 5 usd
And 30 for import 
Yuuuup
I ordered another 4...
They aren't taxed through the main site AND they currently have a Mother's Day discount...
@spiral canyon rare Calsy tag for trans flag box
shmallow 
Yessss
Does it look stackable
Heh
A switch switch box box
I need a bigger keyboard case to put the switch box into the switchbox slot
True
I got a 80he keebmat 
I'm getting one too!
But waiting for Dark Gray restock
Yet still no TKL restock 
Yeah, and @dapper hazel is genuinely friendly and nice
which version did you get
felt 80he
this!
get a sized switch plate for your switch boxes (maybe not with 84 slots)
by "accuracy", do you mean the steps the switch can detect?
so, if im understanding correctly, from your example, tikkens can detect any movement >= 0.02mm?
and what do you mean by deadzone hardcap?
i still need to get a keebmat tbh
i been using a cork mat for a while and its not it for me
good news tmr blog is done-ish. Now just some minor cleanup here and there while we make the images and fingers crossed it's out by end of this week sometime maybe
i never have to read another deep dive into how tmr sensitivity is applied hopefully
Enter TAKO at checkout for a small discount 😉
Use WOOTING as a code ;)
the shipping = to 3 mat
didn't keebs add discord discount as well?
Muh taobao mat sounds fine 
yea tbh i am using the NRKB mat
cuz toro had them in stock
wait this is not as bad as i remeber
🤔
Grabbing a keebmat as well. The light gray felt one would fit my board nicely.
not really no
Replacement for a tape mod.
Instructions | Wooting Details Important Disclaimer - PLEASE READ Remove KEEBTAPE very slowly and with caution from PCB! Do NOT apply onto electrostatic capacitive or similar uninterrupted and componentless flat circuit boards such as HHKB™, Realforce™, NovaTouch™, or Leopold™. This also applies to the inside of your c
oh interesting
maybe he's Australian
Replacement for the tape mod for the back of the pcb
wonder what the difference would be compared to tape mod
I can't imagine it making much of any difference
It's probably more for people using the holy cases since the PCB can be seen underneath
one of the selling points is preventing the pcb from ever touching a case bottom on flex boards
but idk if that'll ever happen tbh
unless you are a barbarian in berserk
Its like a gel layer instead of painters tape. Sound slightly deeper. But to be honest, probably just 1-2٪ in noticeable difference
ah ok
Using it with a tofu redux, for reference
ngl keebmat would be cool to have but idk how deskmat + keebmat would be
i should probably do other things first though 😭
i legit havent changed anything except switches
Switches have the most sound impact IMO, plus the case itself
I didn’t think about it before ordering but I’m sure it will probably be fine. Tenz80he comes in tomorrow, can I put my gateron jade ultras on this without problems
I have them on my 60he rn
i wanted to get gt-80 but nrn
Using them with geon raw 50
did you change plate or anything
Keebmat, keebtape, fr4 plate, geon raw 50 switches, double pbt keycaps, and burger mount for the screws. Quite standard i would assume
And standard foam for the tofu 60 redux with weight plate
Yes. Jade Ultra is fully compatible and is available in the switch selector too, for optimal performance
Nice Ty can’t wait to get it I’ve had this 60% for the longest time now
The f row keys and arrows will be nice to have
Hi everyone, I have some questions about my Wooting 80HE keyboard. I recently had it modified. I gave it to a friend to customize, and he replaced all the switches with a type not listed in the switch selector. I'd like to know if this affects the keyboard's performance, and if so, how significant the impact is. I hope you can answer... Sorry if I made any spelling mistakes 
If they are compatible (list #🪛│modding_faq message) you will be fine, the board auto calibrates to the magnet
But what if it's not on this list...? 
What switch
This one 
tests must be performed i suppose
Those switches are compatible and the keyboard will auto calibrate
Thanks, I'll try it when my keyboard arrives 
these days it's pretty hard to find a switch that's truly incompatible, very few of the old 'crazy outside our range' switches still exist
No custom switch profile for them, they will be tiny less accurate, nothing you'll notice though
Something like 0.01
Oh my, this is the first Wooting keyboard I've ever bought. Before this, I used a regular office keyboard to play
Can't wait to test the keyboard

TY guys
What’s the meta right now for the 80HE? Been ages since i tinkered with keyboards.
Kinda thinking of adding the GT80 case, Lekker tikken switches or are there better switches lately?
#🪛│modding_faq check the recommended switches
And the GT80 is pretty neat
Man, the pricing on the diamonds is wild. How do they compare to lekker tikken?
I’m coming from topre so this is quite the switch lol
Whats the best switch right now?
There is no best switch, check #🪛│modding_faq for recommendation and sound tests
whats the most switch right now
Ufo -> diamond worth it?
most hyped switch i know of are diamonds and heart of the ocean atm
ufo are also nice but they are apparently tricky to open and can get damaged unless you have alooot of patience
On Keybay and other resellers they are a little cheaper, but $2 is pretty standard pricing for ws switches like the fluxes
Preference
there was someone that did full manual lubing on ufos but i think it took him about 5 hours
They aren't better or worse, you might like them more or less

Oh also, if I am not mistaken WS runs a sale for diamonds right now @obsidian lily
What does the 4mm travel distance mean in practice compared to most HE switches that are generally a bit shorter?
They’re nice if you want a lighter switch, UFOs are high up there unless they dry up fast for you (factory lube), then it’ll take a while for you to open them up if you can (the meta looks to be taking a razor blade and getting it open)
Not to much
Not much difference in the general typing experience or during gaming? Does the extra length feel more like mechanical switches?
I tend to prefer 4mm. Less likely to get bottom out fatigue
Papa has arrived 
So my AMD system started running about 20c hotter than usual a few weeks ago. My AIO cooler is 7yrs old and apparently dissipation on closed loop systems is a thing and 5-7yrs is the fairly common timeline for it to become a problem. Anyway, I spent about $300 this weekend and spent 6 hours rebuilding my rig only to find out a BIOS update I did a few weeks ago wiped out my PCO/OC/Undervolt settings and my saved profiles, so the system was running stock settings and that's why it was super hot lol.
What switches are you all using?
Depends on the board for me
UFO, but will swap to Diamonds once the full set arrives
None of them is worth the price though
So heavy bruh
bought a set of ufos today to try them out, was kinda considering diamonds but the price just doesnt make any sense lol
dry up fast is how long? few month?
you can get them for about 1 euro a piece atm with the launch special offer
You're gonna notice spring ping and the top out sound won't be as clean in couple of months
Every ufo I received had their own variance to them, mine started to get little sharper after maybe like a month of dailying
as Wizard already mentioned, they are currently running a promo
the buy 3 get 2 deal can be stacked
interesting
so if you are interested now would be the time I assume 
make the 80he great again
or else...
I aint gay but i will kiss every wooting team member to achieve my goal
ufos is like that ex girlfriend you keep wasting time on and she says "i will change" but never does then time goes on and it gets worst and worst. Especially since you can't lube the switches either
you can but it takes alot of time
true
but aint nobody got time for that
Ah no worries I have no intention of lubing any switch at all ever
so it's good info if you have the time
Better start going to the keyboard events cro
me at the wooting event
Calder will be the first victim
to set the tone of the event
its not about winning or losing but sending a message
@glacial wind I plan to ground with a conductive sponge, does that look good enough?
Looks good to me, can always do more if you’re worried
That’s all I needed to hear, thank you

What is keyboard modding?
Thanks.
damn brother you hella quick boi
Gn
is anyone down to trade a 60he v2 module for 10000 of the juiciest most sincere kisses from yours truly
its not sus yall i mean EVERYONE would act gay for a free v2 module am i right guys
Alr bud
Modules are one thing.
Now certain switches 
Diamonds 
They are currently 1.02 per switch on WS because of promo if you haven't seen it yet
I bought it at the release hour :)
not shipped yet sadly
are novas any wobblier than flux switches?
No, most of those walled stem switches have same stability
interesting
wouldn't the top wobble be dependent on the top out contact?
wonder if they will make a deep clacky diamond
cullinan is deep clacky
it's kind of regular clacky
I think they will release PA12 bottom Diamond for muted switch enjoyers
they will?
I'm just guessing
i hope the diamonds come down in price at some point
They are like $1/pc right now, no?
they are over $1 each
Still expensive even at $1 imo
keybay has 85 for $128
Not there. Wuque's official site
You can stack this
it's even more expensive there
It's not
Choose buy 3 get 5 option
hmm
that is crazy
ok so 72 is now $54
that is way more reasonable
i do not know why they are allowing this
maybe i wasted my money on these deep clacky before the diamonds released
This is for 80HE
Any recommendations for switches that sound quieter and better than the stock 60he+ switches? I like how they feel/perform but the sound isn't the best
Plus like 20 or so for shipping?
If you like quieter switches, check Keytok Nova
Lekker Tikken budget option
You can compare their sound here https://link.wooting.io/soundtests
the cullinan seem more stable than the fluxes
They got lil better top wobble, but their spring is more noticeable
we dont save money in this chat
longer spring type shit
why must hobbies be more expensive as they become more popular
so the cullinan are probably more stable than the nova right?
nadia this is keyboard modding. You knew what you were getting into when you jumped into the void
i am a jew in a hobby about spending money
It's more like just muted than anything
Checks out
Thank you
elaborate
This is overwhelming might just go with the geon raw he?
Just want better sound than the stock switches but dont want to change the feel of the press
bro said "ight this shit confusing so ima shoot myself in the leg"
😂
if money is no object get diamonds i guess
The rabbit hole is too deep
deep clack fluxes
if you can get them at a good price
or look in #🪛│modding_faq
they are like 75c each now so yeah good price
and see which switch you like for the price
To unlock your true power you gotta start shorting Gateron switch futures croski
previous top dog switch have them in my board
can i short cherry futures instead
$140 for switches seems kinda scammy 🤔
oh brother
Get Tikken
my cat just tried to slit my throat
its just the start to your journey
like when ash turned 10 and got pikachu
Raws aren't that good, especially if you prefer quieter switches
get owlabs and deafen yourself
ahhh so your cat received the message
I've been getting all my advice for switches from chatgpt and you guys are giving me opposite advice 
i maintain i did nothing wrong
chatgpt is wrong
There’s your problem
if you haven't figured that out by now might as well actually shoot yourself in the leg
You’re getting your info from an unreliable narrator
chatgpt isnt your friend
If you listen to ChatGPT you’re gonna wind up with jades
jades in spades
STAY BACK JADE DEMON
shoots jades at you from my jade gun
Well how about you guys tell me which switches you use and why that might help me a bit more than just recommendations 🤔
or worst he might want mx switches on tmr board 
holy shit hipyo mentioned??
bipyo
hipyo where
flux deep clacky but i might upgrade to diamonds because @sacred elm told me to
i think goku hates me now
i had lekkers v1, geon raws, owlabs ti, deep clack fluxes to ocean heart diamonds
deep clack fluxes was worth every cent
and ocean hearts are really nice but expensive
why not cullinan
So lekkers v1 are the stock 60he+ switches right? I might have to go go with your suggestion cause you seem pretty committed to the hobby
you are doing cullinans soon?
cf + cullinans on 60he+
you are paying again for a slightly different switch
if it's a new board i would understand
when i decide to mod it in a couple of months
yes my ocean heart are on my 80he
Someone was able to get pink lotus flux for like 46€, I’d try seeing if you’re able to get it. You can look it up on the switch database but it’s like a hybrid between muted/clacky: https://a.aliexpress.com/_EIRzItU
Alright question for you goku and varedis. Pink lotus flux, ocean heart diamond, or deep clack fluxes? If you had to choose one @tropic urchin @tulip rapids
I’m biased towards ocean heart
Showing $17 usd for me nice
Did I hear jades? 
But that’s without knowing what you prefer
I also love 45g bottom out switches so diamonds are what I’ve wanted since the original flux came out
But pink lotus is a really great bet if you can get it cheap
novas or diamonds for stability and thock?
Ive never bought custom switches. I like how my stock switches feel 60he+ but thats only because that's all I know. Ive only bought one keyboard and thats my 60he+ barely got into pc a little less than 2 years ago*
Novas are closest to your Poseidons so
but are they as stable as diamonds
shafie thinks they will make a pa12 bottom diamond
They should be within 95%
I’ve never used them but all walled stems are legit roughly the same
5% can make a lot of difference when you have hyperacusis universalis
I said I think
that's what i said too
Are you going for a soft build, or do you like a clacky build
You’re going to be waiting forever
and that's what you think
☝️🤓
um actually your mom
🤨
bazinga
Just ask chatGPT, and get jades
(don't)
Not too picky as long as it sounds better and slightly quieter than stock without a sacrifice in performance
Your dad just came back with the milk but I just saw him drive away..
joke's on you my dad is a psychiatrist
That’s what you think
nova
Bro 😂 so many damn suggestions
hell yea brother
So if you care about getting a good deal, I think Deep clack flux/Pink Lotus are great bets. I’ve tried DCF, but not Lotus, but my current preference is ocean hearts in FR4/aluminum plate. Cullian is also good, but needs a stiffer plate to bring the sound out like ocean hearts
Stability will be roughly =, so depends on how much you’re willing to spend
All of those options are going to mog tikkens, raws and the rest non walled stems
You can also listen to them on the mod website Sno put together @ivory musk
I’d start there and see which you like
Pink lotus is better version of deep clacky Flux and they're quite cheap on aliexpress
PL for that cheap is kinda wild tbh
Even on the link I provided?

Try 10, 35 or 110
Gn
Oh nice 110 worked
Thank you
Part 1 done
You mentioned an FR4 aluminum plate
🤔 what is that
that's two different plates
fr4 is what the pcb is made out of (fiberglass)
aluminum is aluminum
they are what the switches click into
TL;DR I think you have a PC plate by default in your 60HE+, FR4 will be stiffer and give you a fuller bodied sound, while remaining somewhat neutral. Aluminum id use if you have a brighter switch (sounds dead with deeper switches)
wheres tuanGPT
I plan on building a new keyboard at this point instead of swapping. Im alreasy in too deep. So I've got the pink lotus switches, and the he v2 pcb is aluminum so I should be good with that then 🤔
i have been summoned
V2 case is aluminum, PCB is still fiberglass (FR4 material)
Ty clanker
My rec would be to try them on PC and see what you like/don’t like and to try a few plates out
Will be impossible to know what you prefer without a couple of plates to try in front of you
But since you’re going for V2 now you’ll get FR4 by default
So that’ll be a good test
Which case are you getting @ivory musk
chatgpTuan i thought i said begone
Okay cool, will probably order an aluminum one if I don't feel satisfied. This feels like the tip of the iceberg
it only gets worse
I'm looking at the tofu redux 60
https://kbdfans.com/products/tofu60-redux-case?variant=41472688062603
Specs Case: Anodized Aluminum, E-coating Aluminum, Brass or Acrylic Weight bar: Brass, surface sandblasted process Structure: Tray-mount Compatible with most 60% PCB, including DZ60 rev3.0/DZ60 RGB-ANSI/DZ60RGB V2/GH60/Wooting 60HE PCB, etc. As seen in our video in the photo gallery! Weight: Aluminum case approximately
code override
HAHAHHA
sry i mean ours
I'd recommend getting brass weight. Without if Tofu is very pingy
brass would be way way way more expensive
ok but what about take my money
and way too heavy for the avg kb modder
u can tell that to kbdfans
i need to be able to defend my home with lethal blunt force
This is my current case on my wooting 60he+ (i know I accidentally put the spacebar backwards, and swapped it after the pic)
Cool will do
Didnt plan on buying that but now I will
you know we got a keyboard freak in the making when he got the backward spacebar
wym backward space is the mose
the what
I have nothing white in my set up but the white key caps look kinda cool
Do yall have pics of your keyboards?
I guess favorite since you all probably have multiple
the mose duuude
yeah no idea what that means
DN
neither that
just got mine today and i’m loving it
love how tiny it is makes it easier for my big ahh hands
here are mine so far
i have another one but i dont wanna talk abt it
Mars Cadet???? 
Beautiful
u can see i also have backward space on the right one
It did kind of feel like it would give me a competitive edge 🤔
chat this guy knows ball
it just feels more comfortable for me
esp on games that i jump alot in
ik i watch film
Waow keygeek has scratchy clack switch now 👀
Keygeek T2
scracktchy
which switch should i get ufo or diamonds
what in the istg there was a transformer figure that has this color scheme but i can't pull it out of my head
ok ty
I forgor... So long since I watched transformers LOL
we must think
Interesting
I wanna get the new dual bottom housing hmx too when it releases auuuugh
always late to the party
Unikeys restocked soju 
https://www.reddit.com/r/KBDfans/comments/1t7rou8/early_may_news_updates/
Tofu 60 3.0 expected shipping ETA is end of month 👀
how
sojus arent being made anymore
If anyone wants to help me decide on a case and keycaps for my custom 60he v2 please post some recommendations here. I need some inspo https://discord.com/channels/167181566978555904/1070668460905988106
Idk they just had some in china warehouse prolly

Tofu 60 3.0 (if there's extras), unreleased hali case 🤫
its either this or gt-80
Moar soju 
bro with the kits i have rn
i have like 6 different enter keys


it gets to a point
I would say neither and get GMK Prussian Alert 😛 /s
its not bad but soju blue is soul sucking
Mmmmmmm
but also i wanna make my 80he a weapon 
GT-80 not heavy enough to be a weapon, get a full copper hippo tkl instead 😛 😛 🤤 🤤
i saw hip-o and i was like 
i bet its like 550 buckoroos
7 hunned 
I mean its a huge chunk of metal, of course it gonna be expensive 
i do not hab monies (i do but im not crazy enough to get)
Yeah was just joking obviously 😛
not a trap
not a trap yall ill legit kiss you 1000 times for a wooting
I have to change the Wooting case cause it hurts when I press control
finna catch me punching my monitor
Thanks I hate it
i got the bug
YEP
🤤
Metakeebs EC??? 
Zamnnnn
I might do grey and one of the kkb dolch
If I can get my hands on it
Keykobo Dolch Keycap Set Keykobo Dolch Cadet is a collaborative project between designer KEI and manufacturer Keykobo.It reimagines the classic Dolch palette with a subtle twist—adding modern contrast, sharper legends, and advanced manufacturing techniques while keeping the soul of Dolch intact. Keykobo Dolch Keycaps F
no thx
Does the switches affect latency or are they all good for gaming ?








