#🔧│keyboard_modding
1 messages · Page 828 of 1
Wait are the UR ice ultras loud then?
Pink Flux has more pleasant sound
not anywhere close to Ti HEs or Fluxes
Good
they’re clacky still
Clacky is fine clacky loud is just annoying
Theres nothing wrong with clacky I just dont like it when its too loud as clacky can tend to be loud
Yo the gamerfuels actually sound nice though? @tawdry tree @sacred elm
And they dont sound super loud
They arent listed on the database either.
It's Raptor v2 recolor
Sound test is in the database
I dont see gamerfuel in database
Would you recommend raptor V2 for me ? as long as its clack but not loud
It sounds flat, maybe. Be aware it can develop spring crunch which can be very annoying.
Worth a test 10 piece batch then perhaps
https://www.youtube.com/watch?v=AheZ81uB83g&t=655s
The gamerfuels sound pretty good in this video
Hall effect switches have become so good in 2025. In this video we test some of the favorite switches of hall effect keyboard enthusiasts along with some newer ones from Gateron, HMX, Everglide, Wooting, TTC, Owlab and Geon Works.
We are demoing the switches on the Geon Works Venom60He with an frog mini leggera G case with an aluminum plate an...
I can assure you raptor v2 isn’t very loud irl
From the videos I've watched they dont SOUND loud based on the YTvideo
Sound tests can also be deceptive for a variety of reasons, but I would take all of them with a grain of salt
Im just using it to get a general feel thats all
I think I've asked this before but I forgot the answer do you think geon raws are loud ?
No
Granted I tried them with PC plate and I hated how soft/not loud they were
They are clacky, but I’d say they’re a slight bit above raptor for clackiness/volume, but they’re not as loud as say the owlab ti he is
Glad to hear
They're louder than DC Flux, Raptor and Tikken that's for sure
The more I use the tikken, the more I like the tikken.
Are those DCF Flux thcoky versions the most desired HE switch rn?
My only nitpick would be I'd like a bit more stability. But it's a minor amount lacking compared to the more stable switches on my 80HE.
I'm probably going to just get tikkens for my 80he and retire my KOM POMs
Because you don’t like Tikkens, I think you’ll find Raptor HE V2s/Gamer Fuels too similar, but you can try them anyway to see.
Oh really? but yes that is correct im not a fan of Tikkens btw not because of 4mm or anything like that I actually prefer 4mm but the sound not a fan of muted marbly idk not a fan
Tikken my fav switch
Yeah, I find them pretty similar
they are, if you count from the end of list
They are very popular, yeah. They sound and feel good, also very stable.
My perfect switch would be tikken travel and feel
KOM POM stability
IDGAF about sound, both are fine.
Tikkens traded stability for full travel with their shorter stem pole
lol
yeah
I want to see more full travel switches
same
Then just drill a hole in your KOM POM bottom stem
kind of sick of all these lower travels
I REALLY like the full travel
I might play with that.
Yeah same
I prefer 4mm but I also like the sound to be good sound is number one for me
@cyan lark’s creation 😭
nah
You’ll use 3.2mm and you’ll like it after you get taxed
Guy from Sayodevice server were first ig
don’t remember the dates on that but turing’s pic is pretty old now I think
Anyone heard of the remingoat?
ye
He posted a review of the Flux's
turing first, sayo guy was pretty recent
Which is interesting cause normally he usually covers mechanical switches
Yeah bro has a switch obsession
He rated the WS flux very high
probably on somewhat outdated switches by now but still useful
Please don’t it’s a waste of a good switch
oh you didn't like it?
is the mmd c1 going to be on the switch selector
Yes
It wasn’t intentional, and no I didn’t. Got punched out while lubing switches cause I am The Hulk.
ah
Soon™
🤨
if you want full travel KoMs, this is the only way
so what was bad about it after it got punched out, Turing?
The sound? or the performance?
Let em cook, now it's actually been released im sure adding more switch options will come pretty quickly
then I might actually drill lol
I do not love this but if it makes them happy
Have you used Lekker V2s?
Yeah it sounded kinda like Lekkers
Must feel mushy too, no?
I'm using the switches that came with the 60HEV2, the tikkens
and on my 80HE I'm using KOM POM which I lubed
Yeah, it turns KoMs into open bottoms and all open bottoms kinda sound similar
I forget and I binned that one ages ago. Don’t remember the feeling being significantly impacted
Ah, well you could check a sound test of Lekker V2s as drilled KoMs will sound similar.
sound isn't that important to me
only stability and travel
as long as it doesn't have a sharp rattly clacking sound I'm good
yeah I have one I'll try
my long-standing kb before the 80HE and 60HEV2 was a cherry MX red and it was kinda loud heh
if you drill from the bottom, rather than from the top (through the pole guide) then you’re good
Mushy, with extra tight bottom
Sir calm down 🥵

If those were mushy I think the hole was drilled too small tbh
@tawdry tree Would you say that the jades are loud like stock gateron jades?
Or that they are outdated
Wtf why
Still waiting on my industrial quantity of Nair to be delivered. I will be livestreaming the Nair bath, donning a clean room suit, then re-taking the photo. Please bear with me, I'm trying.
Proceeds from the stream will ofc be donated to alopecia research 
is that, factory garbage that was not cleaned out during post processing!?!?!
huh!?!?
oh wait
ohno
WHYYYYY
?
jades vs Jades?
@deft jolt Im just asking like in general
if they are loud gateron jades in general
Jades are certainly not quiet
Yeah I didnt think so either
ik im asking a lot of annoying questions lol
But are they louder than Geon raws
In your opinon if you used them
Should i get the gateron jade pros or the ultras? and what are the differences between the two
Same volume but different sound profile?
jades are not quiet
pretty mid loud to loud
the jade ultra is one the quieter end
Yeah I have Jades I would also agree they are not quiet
wait are the jade ultras supported ?
Feels like there is something inside the V2 that makes it sound extra marbly? Anyone know what that is
Yo wtf are those mx switches
Drilled out HE switches to turn closed bottom into open bottom
Jade Ruby
Yeah that would make sense
Ah ruby
Maybe PET film on top of the PCB
I think I threw mine away kek

I destroyed tf out of that tape mod as well
was debating on throwing that out. thankfully you told me this
now i just debate with myself wether i wanna keep foam inside or silicone
Everyone hates that PET film
By everyone I mean everyone who I've talked to it about
Yeah only some people hates it some people love it
With the switch selector, yeah. You'll need to use beta Wootility. In the near future Wooting is going to add Jade Ultras as an option.
Huh, I guess count me on the other side. S'fine.
Not everyone, just some people like the raw sound of the keyboard
Gn
We like them raw
do you know what the difference between the pros and ultras are?
Sound and Ultra has less stem wobble
alright thanks!
You can check the database and compare them https://link.wooting.io/soundtests
what does pet film look like
A clear plastic sheet
gn twin
it's just a clear film that goes ontop of the pcb
oh that one
what does it mean that the jade ultras are semi compatible with the board
Jade Ultra is fully compatible after the switch selector update. Before it wasn't fully compatible due to weak magnet.
alr i see
ill just use the pros cause i probably cant refund them now and theyre the first time im using different switches and when i eventually get off the og 60he ill try the ultras
anyone got a link for keyboard cleaning kit
or the wooting one the best deal
wait why can't u refund em
just use any 3 dollar full kits
i probably can but ill just keep them since im on the og 60he and ill use them for a bit before i upgrade to a new wooting
What’s the best lube to get for springs and stabilizers?
Currently looking at the Krytox 205g0
That right there is the best
hm okay
kk thanks
which one do u have
Krytox 205g0 you can use for everything, the main lube we all use for switches and stabs
But if you do ever come across on wanting to bag lube your springs when lubing your switches, look for krytox gpl105
just buy any cheap kit
that has good reviews
I'm buying an electric vacuum, duster, etc
all in one
like 10 dollars or sum
do i need to put any lube on the jade pros or nah cause they come with it already
should be pretty good out of the box
don't need lube
For the optimum keyboard do you guys recommend different stabs?
I got it as a gift for my coworker. it sounded fine and there wasn't any rattling on his. got the V2 module and optimum case for his setup though
I just ordered the kit as is with a he+ module. Idk if they have the same ones.
Im considering getting the 80he but it doesnt come with the friction mount + all the new stuff they added for sound with the 60he v2 right?
it is gasket mounted though
Im assuming it comes with the same plate, just a larger size obviously
Does it come with foam as well? Or is that just with the 60he v2 since it has the friction mount
80HE has a PC plate the 60HE v2 is FR4
Ah okay
Im kinda missing my tilde and f keys
Ik i technically still have them with the function key its just inconvenient
both have foam, 60he v2 comes with optional foam for if you wanted to mount it more traditionally
wehhhh who made this la
Cals of course

Can't wait to get the best switches ever made
It's Raeds 
SONJAAAA
(prices in NZD)
Can't pass up a good deal
Shame they sold out of the type r's
damn
What about HMX Fire Up In My Cracks 🤤
@vivid rampart
Excuse me! I am using Wooting 80 Keyboard.
It seems that my keyboard have some issue.
My Ctrl button and R button can work seperately but can't work at the same time
How could I fix it
@blazing jewel
@uneven cradle
@autumn creek
pleasse dont mass ping mods
its basically a road trip to a timeout/ban
you can ask the questions here or reach out to #1019755933959733258
okay! thanks
Yep, what The Frostson said. This is your one warning
what kind of keycaps are best for 60he
I think keycaps is like.. 99% aesthetics
I don't think there's a "best" set there, though obviously I could be wrong
Which custom keycaps can you use on a Wooting 60HE+
Almost all of them
Outside of some rare cases like old Logitech gaming keycaps where companies chose to do their own special stems
Drilled KoM POMs 😭
Gm
By the way, I’m not sure how secure Raeds will be in the v2’s FR4 plate. They’re secure in the 80HE’s PC plate so you can always use them there if they end up being too loose in the v2’s plate.
was actually thinking about putting them in the venom 👀
Venom bad with Raeds 😭
fine yeah. I don’t like the switch puller personally but it’s better than the one woot includes at least 😂
Venom’s plate isn’t really tight at all, that combined with the multi-layout plate holes it has, doesn’t make it a good combo with Raeds
Multi-layout plate holes are those combined holes of split backspace and backspace for example. They require switches with mounting pins.
alright well I guess I'll have to play around
it's a good thing I have 4 HE boards now 
that's true
stand osume shelf?
although I have a feeling number go up
i knew it sno is a jojos character
if worst comes to worst we just get two osume shelves 
Eventually we get to this stage
just get gateron twins puller
me when id unbox all wootings be like that
or the 3 in 1
but i actually wanted to get tons of those osume stands for a glass display case
or smth to do it sideways not upwards
Nothing beats the wuque 2$ puller 
Lol was about to post the upgrade to my previous post
bad. the 3 in 1 is better probably but also quite expensive 😕
why bad
the v2 twins puller was decent
V1 was okok
scratch plate and no control over how you pull them
I didn't experience that?
scratches hard plate materials and dents softer
it’s a flawed design, you push those metal pins directly on the plate
also it's 4am in new york idk how I'm awake
might not matter much to most ppl but it’s a waste nonetheless imo
then the tx multi tool wld be better
regular TX puller with multi tool as dedicated keycap puller is my go to
Tx multi puller glorified keycap puller
Don’t get me wrong it’s the best keycap puller I own but the other functions aren’t great or too fiddly to use lol
I was so close to dropping a silly amount of money for the hibi pocket puller
Is that a pocket puller in your pocket, or are you just happy to see me? Meet POCKET PULLER, our totally necessary solution to the decades-old dilemma: What if I need to pull keycaps 'on the go' in a stylish manner? The POCKET PULLER, or PP to some, is available in the following colours: STRAWBERRIES + CREAM, OFFICE BE
it's cute tho
so over the top haha
I still might 👀
can grab it along with your mahjong set https://hibi.mx/products/kates-mahjong-set
HIBI offers a mahjong set to celebrate the Lunar Year of the Dragon! 🐲 The Dragon, also known as Loong, is the fifth of the 12-year cycle of animals that appear in the Chinese zodiac related to the Chinese calendar. If you're in our Discord, you know how much Kate loves Mahjong and how important it is to her. You'll al
dcf cleared custom and restock of 205g0 arrives today
time to lube n install the yikb stabs
theyre coming
there is 2 boards in there that I would actually want
jane v2 and the shi (and the iS0)
lol thats hilarious
yea uhhh
actually
unsure if that is a V2
that USB cutout looks like C
might be a custom V2
the shi was like 1200USD 
raffle only
Is that a blacksimon iso enter key 💀
Trueeee
No lol someone did it
Gravastar UFO HE switches
If this were posted in TGR server or something a war would break out 
True
oh and pretentious idiots that don't get keyboards to begin with
they have (mostly) good boards but their discord is ass
Haha 
I dont really get the hype behind a lot of the boards that are popular with (portions of) the custom keyboard crowd
the jane V2 is just a REALLY solid keyboard overall
has the traits of a classic korean custom but executed really well
the hyper just comes from it being very limited in numbers
and then TGR also charging quite a lot to begin with
I just think it looks kinda plain for the price
To be fair it seems to be fairly easy to mod with different custom weights but even then i‘m not super into the shape etc, doesnt look like anything special
There are some others with similar shapes that also seem super popular and i understand those even less
I mean that also is part of old korean customs
- I prefer more plain boards
if you want gaudy boards buy chinese ones
I mean stuff like matrix
I also just dont really get the appeal of having like 6 of the same board with them all looking the same except for maybe a small color variation
eh
Radii are different, angles, bottom deisgns etc
some have different front designs etc
No like i saw a guy that posted the same board in like 6 different colors
well yea that is other people
I feel like that is very much the mode crowd
but all mode boards I have tried are kinda mid
Yeah if i wanted to have several boards i‘d like them to look and feel different
Which is what i am doing rn
then buy boards that look and feel different
I am doing that
new huano switch, 1 yuan each launch pricing (10 for 10 yuan, limited to 10 sets per person)
new gateron pcb "Ultra"
a new PCB release every week from gat 😵💫
on tb already?
found it nvm
So I’ve friction fit my module into my HIBI hero case, but it was a tight fit, and I have no idea how to get it out? There is no puller or anything for the friction fit pad for the original 60he version
bruh when are they releasing the other switch
is just dual led likely gemini
not out yet
they have total of like 5 or 6 gt boards I never seen before
or unreleased
🤞🤞
ttc also doing pcb
Gt60 Gt60+ Gt60Pro Gt60Pro+ Gt60Ultra Gt60Ultra+ Gt60v2 Gt60+v2 Gt60Prov2 Gt60Pro+v2 Gt60Ultrav2 Gt60Ultra+v2…
don’t think it’s sparklink, seems self developed or at least partially
gat should’ve went with sparklink like TTC tbh
did u see the new stabs
29th but the listing is on tb already
from ttc
plate mounts 🫤
Yeah, that’s sad
could be
no way ur gonna use plate mounts on atlas bro?
who said I was
I have Knights v4 at home
just never used
cos idk how to use
🔥🔥🔥
Enjoy the content? Support me with a sub! https://shorturl.at/abuC8
Links to tools found in the video:
https://ktechs.store/products/tx-stabilizers
https://ktechs.store/products/geon-twister
https://ktechs.store/products/mechanical-keyboard-lubricants?variant=43576503075046
https://ktechs.store/products/premium-flathead-brush
https://ktechs.sto...
you can’t use most of the layouts on atlas with plate mounts
so kinda need to use pcb mounts if you want to take advantage of it
Knights is compatible with 7u and 7u split?
with 7u ye
not with split 7u as it doesn’t include 3u wires
need to get those separately
Are the TTC Stabs good?
no more stab rattle but it kind of "catches" when you slowly press the key down, like there's a tactile hump
Oh okay so i cannot use them for V2?
Then SwagKeys V4 prob?
But i have the Order them 2x..
you can but you prolly wont want to
a set of knight v4s should be enough
One Guy said i need it 2x
But prob if you dont got Iso DE
What Wire Size are these?
I need 5x Wires
Its prob 5x 2u Wires?
So i need to Order it 2x
One Pack includes that
yea need 5 for the split
alr
Or can i just buy a Wire Set?
Cause i got enough Housings in it right
Its only the Color thats different then cause Silver is sold out?
ye enough housings, just need wires
The Wires are the same as in the Pack? Just the Color different?
that i'm not sure
Any1 knows if it makes a different in anything or is it just the Color?
There is still no information regarding the Raesha
as far as i am aware its a color thing but i can b wrong
wire set is like idk tbh its just a wires if it soundsl ike a wireset
Yo guys, I have a problem, I tried mounting my new 60heV2 with my tofu 60 redux, and the cable hole is not aligned :(
Yea just get the normal one
Remove the rubber points and check again
Oh that
Yeah
Did u check the cases screw alignment ?
you gotta unscrew and move it to the side to fit the PCB
I’ll try that
Trust it'll cook
Wym?
Do you remember the switch with the huge stem?
Yeah that worked, thanks a bunch !
Is cool bruh
anyone here built in the 80he zinc, the new version, i can’t get the case to close on the bottom 2 screws any advice?
do the gravastar ufos fit on a v2?
yes
Bottom screw remove slowly remove the top or bottom then remove the cable slowly
i need to put it together not take apart
idk if i’m missing smth
This tutorial shows you how to assemble your Wooting 80HE module in one of our compatible cases.
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out...
I think it hinges from the bottom
@glacial windMay I ask if TTC's latest Year of the Horse switch will be compatible, after all, this switch has a 3.45mm travel?
What mods have you done? This looks like it's full of foam and that's why you can't assemble it properly.
ah, also looks like that plate doesn't have holes for the top case
It's not compatible with the zinc case.
just the torontokeyboardman kit
i got it down in the end just took some prodding of thre foam into place thank you for the help though
If that plate doesn't have these holes, you won't be able to use it with the Zinc case
ah what will happen? i got the whole thing screwed in now
if i got it all screwed together what is the worst that would happen, i can’t imagine it’d break etc?
It's fine I guess.
Just keep in mind that foam between the PCB and plate affects the accuracy of the board, so it's best to remove it
it will be eventually
It should be. There’s no reason that they’d suddenly make an incompatible switch
as long as their magnet isn’t way out of normal it will be compatible right away
yeah it's ks20
Well ks20 doesn’t matter
It’s about magnet
But there’s no reason why ttc would suddenly use some crazy magnet change in flux, so it should be compatible right out of the box
Well, switch selector is available so it should work fine
Crunch

Switch selector is available now? Like not in beta?
Beta
Sno, i want to Order SwagKeys V4 for my V2 arriving next Month. Im gonna buy 1 Pack with Housings and a Wire Pack but they are only available in Black. Is there any difference to the Silver once or is it just the Color?
v4 only comes in one color/type now
Cause you said i need it 2x but i think i dont need to buy 2 Packs with Housing for 30 when i can just buy Wires and use them
yeah you can buy spare wires if you have them available
Only Black available
they're not sold everywhere though so that's why normally i just say buy 2 packs
Is it just the color difference
and some wires are only compatible with certain versions
so it's a pita to recommend and check
Its only Color difference on those Wires?
On this?
i have no idea, that's why i don't mention wires
more dcf is coming gg
you need to email them to make sure those specific wires are compatible with v4
because they've changed the wires/housing tolerances a bunch of times
it'll 'probably' be okay, but it's possible also that the wires are too thin/too thick for v4
alternatively if you have typeplus x yikb full keyboard set available, that comes with enough wires in 1 pack
but has to be the full keyboard set which includes more 2u wires
you might be able to get a 104 set of yikb stabs for cheaper than 2 sets of knight v4

👍
https://youtu.be/0cq5nPUYVWg The v2 tests a bit worse here than the 80HE (similar to EyeJoker’s results). With the beta, results are better though, but this is probably the same for the 80HE as well. This guy claims the v2 has the same MCU as the mechanical Venom, not even the HE version, is that true? 💀
Tier list ใน Discord ตอนนี้เกินหมื่นคน
https://discord.gg/WKFQZAjxWK
🙏🏻🙏🏻🙏🏻 Please subscribe ฝากกดติดตามกันด้วยนะครับ
🟠 Collection ของที่แนะนำ Update ตลอด เลือกหมวดหมู่ก่อน
ht...
If so, either the mech Venom uses a way too overkill MCU or the v2 has little overhead, or both? 🤔
Well eyejoker said it is stm something. Worse than gigadevice on 80he but still ok
There’s a lot more necessary for a good mcu than clock speed. There are reasons we pick the mcu we do and it’s not just due to clock speed
It’s kind of the flaw of a lot of testing is they’re only checking clock speed and not understanding what’s actually needed and used
The tldr being the v2 mcu is actually better for what we need in our keyboards, so it’s not worse but better instead
didn't u say like the old firmware make the performance not as good
or is this affecting smth else completely
For eyejoker test? Yeah eyejoker tested on the old old firmware
Like pre switch selector and such. So it’s basically just running 60he+ firmware in his tests
Mcu is a completely different topic though in that some people like eyejoker noticed the mcu is different but slightly lower clockspeed
Clockspeed basically isn’t important once it meets a certain threshold for what you need it to do, then other factors become more important
what you modding your 60v2 ?
As far as firmware goes there will be big improvements running the beta firmware and even bigger improvements once it’s more final as Simon and co haven’t enabled the proper deadzone minimizations yet in the beta
Oh ye forgot. Simon and his dark magic
Tldr is the calibration is totally capable of pushing deadzone even lower on the more stable switches now, but they haven’t allowed it to yet since they want the full thing more stable first
What about getting more performance 
What more performance do you really need?
it’s testing similar to venom already in some tests
Accuracy and precision is much more interesting now
I just bought the Module
So i use my Tofu60 and PBT Keycaps still
og or split
I also want a different one but idk which one
mr thocky getting the UFO probe was not on my 2026 bingo card 👀
Yeah gomd
yeah its hard since tofu is a good case
I rly the Case Design if this Gravastar KB
Its like similar to Holy60 but dont have that Holes
Wish they just release the Case
LEDs Shine trough and shit
Are there any other sound tests besides from the database?
What more are you looking for?
Cause I cant hear the difference in the database but I can hear the difference on other tests
They literally all sound exactly the same on the database which isnt the case in real life so I want to be able to hear the difference
Because other sound tests are probably changing setups/mics etc
So the differences are exaggerated
No You dont get what I mean.
Like in other sound tests I can hear the difference when they swap out a switch when I compare the databse they sound literally virtually the same
They arent changing mics/setups they have the same setup just changing the switches.
I honestly think there’s something wrong with your headset or setup
Yeah but I went on my laptop earlier before and used apple earpods they are pretty good and I still couldnt hear the difference I tested the database out on two computers two different headsets
And on each there was still no difference
Yeah mayve just gonna go for a color change
EarPods 
I used earpods and Dt 900 pro x
And when I used both they sounded exactly the same in the sound tests
Im using my DT 770 Pro when listening to those Soundtests and you can def heae a difference
I don’t know what to tell you man. Everyone else here can hear the differences
You’re literally the only person who thinks every test sounds the same
i think tbh ima get opt case and see how it is. GT60 case not a bad option but i hate the top part of the case
Wait hold on a second like you're telling me that you can hear like a CLEAR difference in the soundtests going from switch to switch from the database? Like you are saying their is a sublte difference or a clear difference? Cuase if you are saying that going from switch to switc hthere should be a clear difference then something is wrong
Yes. We all can
It’s only you
Like obvious?
outside of a few switches that are literally same but recolored we all can hear the differences
So then whats the problem then wtf
Yeah i dont like the Gt60
what for then? the mcu wooting uses even needs a external usb phy, hardware speaking the mcu used are mediocre level
We don’t know. I think it’s your ears just aren’t sensitive to certain frequency or something but literally rest of us can all hear the differences very clearly
only downfall with opt case is wooting wrist rest doesnt line up well with it 😭
beside that very clean case
We explained a bit to eyejoker but we don’t really want to go into too much detail into hardware details, especially not on random public discord
Maybe im going to try a different browser honestly and see if that works I dont think its me it might be something like youtube compression or something like that cause I definitely honestly would say that in general I have pretty sensitive hearing
Sometimes I wish I didnt sell mine
Now that I have the v2
Browser?
Oh wait
I'm slow
Oop
either cuz of your ear buds or you havent developed a good ear for it so it all sounds the same to you
Yeah and see if that makes a difference like from chrome to edge
I forgot database is on the web
may i dm you? i’m interested behind some hardware choices you do
No but like that isnt true because I can always hear other sound tests that sound different I just dont hear it on the database
yea thinking about opt case with dual shot 2 keycaps or i have another set im looking at 
I’m not allowed to discuss it sorry. That’s for hardware people and for private discussions with specific people
I feel like its youtube or something like that honestly or my browser

Cause my Chrome has acted up fucked before
In what way? You gotta pop out the part that’s meant to hold the lip of the stock case, but after that it lines up pretty perfectly
audio enhancements
Do you have the case? If you do please show me this
dont think a different browser would help but by all means go ahead and try that
I do, and I’ll be happy to shoot a pic later after getting my hair done
ty i would appreciate that a lot
I can also show you the previous 60 wrist rest against it too
yeah that be good too
@glacial wind One other quick question for the wooting database tests did you keep the PET film and stock tape mod on during those tests? So the only difference is that its optimum case
and bottom dampener is from optimum case
It’s stock other than changing case and keycaps
Sorry for ping. I feel like i already said this but man i really been enjoying your database of the sound test and etc. You can feel the passion you put into your website thank you 
It’s using the stock optimum stuff
Ok
So PET film is on it right
Ty! You’ll be happy to see what we have coming next year because it’s only 1% of what I wanted to do so far
A lot of it is waiting for my guide template to be ready to pump out the rest of the content
Yes the module hasn’t been changed
It’s literally stock module dropped into the optimum
Ok got it I can hear the difference now although its very subtle I just put one tab next to the other so I can listen to them right back to abck and now I hear a difference
Also I used edge instead of chrome
I just put them side by side and listened to geon raw versus UR ice ultra and I hear the difference
Listening to the geon raws versus the UR ice ultras and the Ice ultras sound a bit higher pitch
bet i'll be waiting to see what you cook next year
Also compared the Gateron stock jades tothe UR ice ultras and I hear a pretty huge difference there
Not all switches have a huge difference I would say some more than others
So it was your browser or something?
Yeah it could have been cause I switched over to microsoft edge and just put one tab next to the other like one window I should say so I can swap compare more easily and I can hear the difference now
But again not all switches have a huge difference some more than others when comparing
Some sound the same others have a huge difference
Yeah some are similar, some are huge
Like the jades versus the UR ice ultra that is a big difference imo
Like phylina thunderflash and ur ice ultra are close
While ttc switches sound really different to clean sounding switches because ttc doesn’t stock lube their older switches so it’s rattly stock
UR Ice ultra sound really clean
Like relistening to the jades now on your database dont they almost sound pretty metallic at times if you hear that?
They have this sort of metallic sound
Old jades have rattle cause they’re older gen
Yeah you can definitely hear that
you can hear less rattle/chatter as you go to slightly newer switches since tolerances got tighter
or ttc who just didn’t lube until their most recent flip switches, so all their switches sound chattery as hell stock
I got recommend UR Ice Ultra by some other folks in here but just curious what you would recommend I give out a try for something that is clack but not super loud I dont like super loud switches but I dont mind clack
And I also dont like the Tikkens
Ur ice are nice yeah. Phylina thunderflash is also very similar sound with a different stem
Would you say that UR Ice are opposite spectrum of Tikkens
for sound
Cause I dont want Tikken sound
Eh not really, they’re just more mosquito like sound vs tikkens kind of have a muted reverb kind of sound
I’m not sure what would be opposite of tikkens, probably flux
Not deep clack flux but the original flux
Tikkens kind of sound like marbly muted to me
They dont really sound clacky to me
Or its like a marbly clack
Original Wuque flux in there if you use search box is opposite of tikkens
They’re super loud, super sharp
Most people hate it lol
Try gateron jade ultra sound test
Sure
Those are kind of a more muted sound
But honestly if you like ur ice ultra/Phylina thunderflash sound then go with them. They’re excellent switches anyway
Im gonna buy a test pack from torontokeyboard man
Always buy test pack before committing cause you wont know 100% until you try them
a 10 pc
@glacial wind Have you heard of Kailh ice cream magnetic switches?
Yeah I have them in the way
They’ve been slow to ship cause of Christmas I think, but I already have them ordered for sound testing
Are they new switches and do you expect them to sound like a creamy clack?
Newish but I expect nothing new
Probably similar sound signature to some of previous kailh switches
New stem material so was worth checking out but I don’t expect much change
I might eventually try UR ice ultras, but honestly the tikkens are just really good for me
There isn’t going to be a major change in sound like some creamy golden switch for any of them
Hi sno
They basically don’t exist right now due to switch design
I heard a test of them and they sort of sounded like a creamy clack?
Unless they redesign the entire switch you aren’t getting some magical creamy switch
I mean they're cheap why not try em out
Is that possible in the future?
Maybe in a year or two? It requires entire design to change basically
I feel like if I lube my Jade pros it would feel a lil better
You need to somehow take the magnet out
The bottom out is weird tho
So you're saying difficult but not impossible?
just to confirm, you can friction fit the v2 in the alumaze right? without any screws, or did you need to add 1 screw to ground it
Probably impossible with current switches, but who knows. Maybe someone figures out some innovative ways to change interior structure
I also can’t really type rn so Ggs don’t try to cut stuff w a razor kids
1 screw to ground unless you don’t want to ground
Sno switches when?
I’m actually most excited to try out the ttc horse switches
isnt that risky?
not grounding
Whats special about those ones?
Not that risky, but we don’t cover any issues due to not grounding
So we advise grounding
Once you review them, can we expect them to pop up on the databse with a sound test for the Kailh Ice cream?
New interior additions to the housing to change sound a bit
I’ll be keeping an eye out for the database testing
Yeah probably in a couple weeks whenever they arrive i usually throw a sound test into the database
Do you get sent switches for free how does it work?
Some free, some I buy under wooting. Just depends on what’s easier
Do you have any plans to do sound tests for switches in the 80HE or just planning on sticking with 60 he v2 for the future
Nah just 60he v2 because changing board invalidates past sound tests for comparison
So that sound test setup will never change at all
Sounds good to me
Good
That makes sense cause you dont want todo any extra mods
Thats going to change the stock sound of the V2
And makes it easier for people to compare
Most important part of a sound test database is that nothing ever changes. So even my mic is measured and fixed to be in same spot and same distance
Does the optimum case versus the V2 aluminum case make much of a difference ?
Since you test with optimum
There’ll be minor change just due to case density yeah, but not huge
The "Wuque Studio WS Flux HE Switches Deep Clacky" sound very nice, however they are way to heavy for me. The "TTC Flip King of Magnetic Switch" sounds nice and are light and good to press/spam
Ttc said they’re sending me both the white and black horse switches so hopefully have them to record in a week or two
Nice
Please tag me when you have gotten them and let me know if they are good too. I tend to really like the TCC switches
The DCFs are pretty good but personally I prefer the tikkens
@glacial wind Yeah buy anyyways I think it was my browser cause now I can hear the difference lol
Now you understand why all of us were confused
lol
Did tcc lower the price on the horse switches or a type on thier page?
Something I gotta figure out with Chrome then cause that shouldnt be happening
There’s some aliexpress sale right now iirc
ag 5.95 for 4
I saw horses at $72 for a set which is a lot lower than normal ttc flagship pricing
they should prolly show the price for the same amount of swtiches, not 4 for 5.95 and then the rest is for 15 switches :p
Clip Clop Sound
that must sound amazing! :p they should have called them "reindeer" instead tho :p
I’m mostly excited because it’s first time ttc have really innovated to different design in ages
Have you tried gamerfuel HMX switches if so what r u throughts on those?
Round stem with those new internal housings and hopefully lube as well is a new look for ttc
Those are raptor v2 recolored
Really thats what someone else said but I thought that they sounded different
i just ordered a wooting and i want a good thock sound what type of switches should i get for wooting 60he ?
Probably different mic or something but they should be exact same switch
Head to our sound database and have a listen to the top switches there
Pick what you like
Im thinking if i should replace wooting case with the "Aluminium Alloy Aim Bone80" it looks sweet, and fun to switch things up after awhile :p
"Aim Bone80" or "Ego80" both look nice
hello guys,
I wanted to know if the Tecsee HE Linear can be used with the wooting keycaps
I wanna buy some for my wooting 60hev2 but the top of the switch is a bit bigger than normal switches and idk if it can be problematic or not
which stem spacer size do i need for the stabilizers the 0.5 or 0.4 one im switching to gateron jade pros on the og wooting 60he theyre 3.5mm instead of 4.0 default. been told to get these
0.5mm, but why are you getting them? Do you have keycap wobble issue?
I haven’t gotten them yet but people said on Reddit and YouTube they had problems with the key getting stuck only on the stabilizer and then I was recommended to get these to fix that if it happens
Shouldn't have any issues with stock or any other good quality keycaps.
Oh okay thanks I just have the stock keycaps so it should be ok
Yes
where can i find a back plate that has a picture for my holy 60 case ?
thanks
I replied to saberrtoothh 
But yeah, you can use Wooting keycaps on Tecsee switches without any issues
Excited to try out modding keyboard for first time probably gonna want to start shopping for more stuff after getting these 
Whats a good switch for the wooting keyboard if i want the lightest pressing feel bc my my apex pro tkl feels better but the lekker switches feels heavy and weird but i can still feel that the wooting keyboard is better
aw I didn't win anything
Good luck on the v2 entries!
490 entries within 3 minutes GG
long time no see thockfather ! Merry Christmas

Merry Christmas!
yeah cooked
good luck everyone
I just visited the museum of Natural history in new york
too cool
I love animals
learnt about the galaxy n human history
It’s the best. Last time I was there I captured this beauty
yeah!!!
I wanna go again
I didnt have enough time to see everything
That’s how they get you 😉
I been learning about animals and dinosaurs since I was a kid
so this place really made my inner child happy
🫶🫶🫶🫶
Yeah it's really great for all ages
Does anybody know keycaps that are similiar to the neosonic 65 he? No matter how hard i search i cant find keycaps in black with that specific matte shine through💔
there weren't avian dinosaurs tho
mostly land
abit sea
but the deep sea area was so cool
giant squid vs sperm whale
def willl take a look ill visit when i get the time in college
giant squid and spem wall wtf thats cool
elephant seals are massive bruh
It's spooky and amazing
only saw like half
life size model but they only made half
or a quarter
the blue whale model was life size tho
i havent gone toa museum in forever so its gonna be great with some friends
u should
@hot drum geon raw 40g or tcc flip king, thats my two favourites and the wooting was waaaay to heavy for me too. You prolly want 35-40g ones.
Ah man thats bullshit there shouldnt be any bot accounts
destroy skynet
this is the way
It's ok to destroy them, clankers don't have feelings.
agreed
hey all, i bought a 60he module on black friday and its shipping in mid january, but i notice that the 60he v2 module is in stock, i just got my switches today and i've been had my case and keycaps since late november lol, so i was thinking of cancelling my original order and getting the v2
the only reason why i didnt go with the v2 in the first place was because of the price but i notice it's only like 20-30 bucks more, so like i said previously, i might end up getting that, the only thing that would suck is not getting the free case and wrist rest that i got originally
i have a holy60 dupe from amazon, and there are reviews on amazon and all that, but there isn't really anything with the 60he v2, since obviously the modules didnt ship out nd etc, and i did see on the compatibility thing that the notion says the holy60 should work with the v2 pcb, but i wanted to hear from yall. the 60he v2 has the ability to tray mount, correct? and if yall think i should go with the 60he v2 as well 😭 jus want opinions
I like flip
yes it can be tray mounted
get the v2 if you want a split spacebar, other than that it isnt noticeably different
i was considering but the keycap set i got i dont think has any blanks so it would look kind of tacky
ik like polling rate is different but i think i would need to be on adderall to really notice that
what colors?
its jut black and white i got some random set off amazon for like 20 bukcs
theres some spacebar kits you can find online
this should be similar
ill def look into this
theres a bunch more kits online that might have the correct sizes
yea this my first keyboard build i wanted to go with sum that sounds nice and looks somewhat appealing
what you need are 2.75u-1.25u-2.25u
yes this was just what i was ab to ask
split spacebar isnt that bad looking https://discord.com/channels/167181566978555904/1449511482915033120 
i thought the idea was cool
of split spacebar
but thats a nice build i like
yeah, not really losing anything going with split if you use the left side more
and instead a hell of a lot easier to make spacebar sound better
idk i nver thought about where i hover my thumb
even so getting used to the split spacebar doesnt take long
fairs
record yourself gaming and typing is the best way
i think after 2 days i was able to get it down
yea thats fair
yea i get used to stuff quick so
i left my wooting at home 
split spacebar when i get back next month 
honestly if anything i can probably set 2 different profiles for typing and gaming

but preciate yall insights will be copping the v2
thats what i do
though its more just actuation points
I need a blank white keycap that is cheap
I like lelelab hokkaido milk keycap design but it's too thin
i wanted to go with blanks but honestly i jus saw the hiragana and said why not
i think i got them low profile tho but oh well we'll try it out
Anyone else think the Tikkens are loud ?
im doing a full white clean build so I was thinking of doing some kinda blank white keycaps
it is loud to me
I don't rly use foam or dampener
when testing
Yeah I also think that they are loud af
it's like flux loud to me or similar
Thats why im getting new ones 🙂
my initial opinions of Tikken are still bad
same
GMK Dune, anyone else buying? 
you got pics?
There are some from last night in here
No, but it has made me want to rewatch parts 1 and 2 🙂
beri wise choice indeed good sir
2 was on TV last night, i was still at relatives. Caught the second half.
Was very different in my native dub be honest.
not my thing sadly, although i love Fallout themes
yeah i dont like this shade of red tbh
Isn't there like a purple/yellow they could do from Fallout? i recall something like that
i remember seeing a white/ pale yellow one
These are certainly the colors I most associate w/ Fallout
Hmm not bad, not bad
Looks more like an easter set to me, colors wise 
copped the split spacebar 😎
where you buying it from
idk honestly
sold out at cannon keys
Probably proto[typist]
does anyone have any recommendations for blue keycaps for 60he v2
keykobo soju?
2.75 1.25 2.25
in that order
could anybody tell me what the best case material for thock would be?
my 60hev2 has this like high pitched pingyness when i type on it normally
that im tryna get rid of
when i softly press the key it sounds low pitched and smooth tho
thock isnt a thing on he keyboards
you have og or split
og
Huh
Gn
then what is thockfather
Pog
jesus
this might seem like a stupid question but would a ceramic keycap affect the performance on my wooting 60he v2
and the alumaze case fits with the v2 with friction fit but i just need to install the grounding standoff
nah, just make sure the spring on the space bar is heavy (like 80g or so)
no, you’ll just need a heavier spring on some keys like the spacebar
u need heavier springs in ur switches or else it won't rebound
so ur switches would be stuck like down
What spring weight would you think for the split spacebar (like a CeraKey H Set)?
assuming you got the 20 tikken from the founder's, you can prop use that
Yeah I should try those out first.
Was wondering if 100g may be overkill for the shorter split bars, and I’m not using tikkens on the rest of the board
do you mean like springs on the switches?
you know those purple and yellow switches in ur package?
u could use those
ceramic is like +20g iirc
so it will be more heavy but thumb makes spacebar feel light anyways
imo
im getting 70g springs for my spacebar n other heavy keys rn
100g is too much

hey all! new here...about to order a 60HE v2. I have been messing with keyboards for years now, but I'm quite rusty and have been using the same Cannonkeys Bakeneko65 for 3 years and I want a change for gaming. This wouldn't be my first time modding a keyboard and I have plenty of caps so I was going to grab the module instead of the pre-built. I really like the optimum case over the stock...
Two questions though, does the optimum case give you any dampening like the stock aluminum case does? Does it need the dampening?
Second question is the switches; seems like the lekker tikkens are quite good, but should I look into any of the other switches they offer? TTC KOM POM and GEON Raw both seem interesting, but I'm unsure what the differences really are.
Thanks! Excited to see what all the rave is about with HE switches 🙂
Optimum case comes with the foam.
Lekker Tikkens are good. I'd recommend getting them, because they are very cheap with the module. You can swap them later with something else from this list if you want: https://link.wooting.io/soundtests
Awesome! Thanks for the info
I'll probably grab the optimum case and tilkens for now
I got OG
did you fix the custom fees issue ?
It got reshipped and delivered already, but can't build it yet. Will be at home in a week or so
thats good it was messed up them trying to charge that fee 😭
$120 optimum case +$330 tariffs 